| # Copyright (C) 2005, 2006, 2007 Apple Inc. All rights reserved. |
| # |
| # Redistribution and use in source and binary forms, with or without |
| # modification, are permitted provided that the following conditions |
| # are met: |
| # |
| # 1. Redistributions of source code must retain the above copyright |
| # notice, this list of conditions and the following disclaimer. |
| # 2. Redistributions in binary form must reproduce the above copyright |
| # notice, this list of conditions and the following disclaimer in the |
| # documentation and/or other materials provided with the distribution. |
| # 3. Neither the name of Apple Computer, Inc. ("Apple") nor the names of |
| # its contributors may be used to endorse or promote products derived |
| # from this software without specific prior written permission. |
| # |
| # THIS SOFTWARE IS PROVIDED BY APPLE AND ITS CONTRIBUTORS "AS IS" AND ANY |
| # EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED |
| # WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE |
| # DISCLAIMED. IN NO EVENT SHALL APPLE OR ITS CONTRIBUTORS BE LIABLE FOR ANY |
| # DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES |
| # (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; |
| # LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND |
| # ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT |
| # (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF |
| # THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| |
| # Module to share code to get to WebKit directories. |
| |
| use strict; |
| use warnings; |
| use FindBin; |
| use File::Basename; |
| use POSIX; |
| use VCSUtils; |
| |
| BEGIN { |
| use Exporter (); |
| our ($VERSION, @ISA, @EXPORT, @EXPORT_OK, %EXPORT_TAGS); |
| $VERSION = 1.00; |
| @ISA = qw(Exporter); |
| @EXPORT = qw(&chdirWebKit &baseProductDir &productDir &XcodeOptions &XcodeOptionString &XcodeOptionStringNoConfig &passedConfiguration &setConfiguration &safariPath &checkFrameworks ¤tSVNRevision); |
| %EXPORT_TAGS = ( ); |
| @EXPORT_OK = (); |
| } |
| |
| our @EXPORT_OK; |
| |
| my $baseProductDir; |
| my @baseProductDirOption; |
| my $configuration; |
| my $configurationForVisualStudio; |
| my $configurationProductDir; |
| my $sourceDir; |
| my $currentSVNRevision; |
| my $osXVersion; |
| my $isQt; |
| my $isGtk; |
| my $isWx; |
| |
| # Variables for Win32 support |
| my $vcBuildPath; |
| my $windowsTmpPath; |
| |
| sub determineSourceDir |
| { |
| return if $sourceDir; |
| $sourceDir = $FindBin::Bin; |
| |
| # walks up path checking each directory to see if it is the main WebKit project dir, |
| # defined by containing JavaScriptCore, WebCore, and WebKit |
| until ((-d "$sourceDir/JavaScriptCore" && -d "$sourceDir/WebCore" && -d "$sourceDir/WebKit") || (-d "$sourceDir/Internal" && -d "$sourceDir/OpenSource")) |
| { |
| if ($sourceDir !~ s|/[^/]+$||) { |
| die "Could not find top level webkit directory above source directory using FindBin.\n"; |
| } |
| } |
| |
| $sourceDir = "$sourceDir/OpenSource" if -d "$sourceDir/OpenSource"; |
| } |
| |
| # used for scripts which are stored in a non-standard location |
| sub setSourceDir($) |
| { |
| ($sourceDir) = @_; |
| } |
| |
| sub determineBaseProductDir |
| { |
| return if defined $baseProductDir; |
| determineSourceDir(); |
| if (isOSX()) { |
| open PRODUCT, "defaults read com.apple.Xcode PBXApplicationwideBuildSettings 2> /dev/null |" or die; |
| $baseProductDir = join '', <PRODUCT>; |
| close PRODUCT; |
| |
| $baseProductDir = $1 if $baseProductDir =~ /SYMROOT\s*=\s*\"(.*?)\";/s; |
| undef $baseProductDir unless $baseProductDir =~ /^\//; |
| |
| if (!defined($baseProductDir)) { |
| open PRODUCT, "defaults read com.apple.Xcode PBXProductDirectory 2> /dev/null |" or die; |
| $baseProductDir = <PRODUCT>; |
| close PRODUCT; |
| if ($baseProductDir) { |
| chomp $baseProductDir; |
| undef $baseProductDir unless $baseProductDir =~ /^\//; |
| } |
| } |
| } else { |
| $baseProductDir = $ENV{"WEBKITOUTPUTDIR"}; |
| if (isCygwin() && $baseProductDir) { |
| my $unixBuildPath = `cygpath --unix \"$baseProductDir\"`; |
| chomp $unixBuildPath; |
| $baseProductDir = $unixBuildPath; |
| } |
| } |
| |
| if ($baseProductDir && isOSX()) { |
| $baseProductDir =~ s|^\Q$(SRCROOT)/..\E$|$sourceDir|; |
| $baseProductDir =~ s|^\Q$(SRCROOT)/../|$sourceDir/|; |
| $baseProductDir =~ s|^~/|$ENV{HOME}/|; |
| die "Can't handle Xcode product directory with a ~ in it.\n" if $baseProductDir =~ /~/; |
| die "Can't handle Xcode product directory with a variable in it.\n" if $baseProductDir =~ /\$/; |
| @baseProductDirOption = (); |
| } |
| |
| if (!defined($baseProductDir)) { |
| $baseProductDir = "$sourceDir/WebKitBuild"; |
| |
| if (isGit() && isGitBranchBuild()) { |
| my $branch = gitBranch(); |
| $baseProductDir = "$baseProductDir/$branch"; |
| } |
| |
| @baseProductDirOption = ("SYMROOT=$baseProductDir", "OBJROOT=$baseProductDir") if (isOSX()); |
| if (isCygwin()) { |
| my $dosBuildPath = `cygpath --windows \"$baseProductDir\"`; |
| chomp $dosBuildPath; |
| $ENV{"WEBKITOUTPUTDIR"} = $dosBuildPath; |
| } |
| } |
| } |
| |
| sub setBaseProductDir($) |
| { |
| ($baseProductDir) = @_; |
| } |
| |
| sub determineConfiguration |
| { |
| return if defined $configuration; |
| determineBaseProductDir(); |
| if (open CONFIGURATION, "$baseProductDir/Configuration") { |
| $configuration = <CONFIGURATION>; |
| close CONFIGURATION; |
| } |
| if ($configuration) { |
| chomp $configuration; |
| # compatibility for people who have old Configuration files |
| $configuration = "Release" if $configuration eq "Deployment"; |
| $configuration = "Debug" if $configuration eq "Development"; |
| } else { |
| $configuration = "Release"; |
| } |
| } |
| |
| sub determineConfigurationForVisualStudio |
| { |
| return if defined $configurationForVisualStudio; |
| determineConfiguration(); |
| $configurationForVisualStudio = $configuration; |
| return unless $configuration eq "Debug"; |
| setupCygwinEnv(); |
| chomp(my $dir = `cygpath -ua '$ENV{WEBKITLIBRARIESDIR}'`); |
| $configurationForVisualStudio = "Debug_Internal" if -f "$dir/bin/CoreFoundation_debug.dll"; |
| } |
| |
| sub determineConfigurationProductDir |
| { |
| return if defined $configurationProductDir; |
| determineBaseProductDir(); |
| if(isCygwin() && !isWx()) { |
| $configurationProductDir = "$baseProductDir/bin"; |
| } else { |
| determineConfiguration(); |
| $configurationProductDir = "$baseProductDir/$configuration"; |
| } |
| } |
| |
| sub setConfigurationProductDir($) |
| { |
| ($configurationProductDir) = @_; |
| } |
| |
| sub determineCurrentSVNRevision |
| { |
| return if defined $currentSVNRevision; |
| determineSourceDir(); |
| my $svnInfo = `LC_ALL=C svn info $sourceDir | grep Revision:`; |
| ($currentSVNRevision) = ($svnInfo =~ m/Revision: (\d+).*/g); |
| die "Unable to determine current SVN revision in $sourceDir" unless (defined $currentSVNRevision); |
| return $currentSVNRevision; |
| } |
| |
| |
| sub chdirWebKit |
| { |
| determineSourceDir(); |
| chdir $sourceDir or die; |
| } |
| |
| sub baseProductDir |
| { |
| determineBaseProductDir(); |
| return $baseProductDir; |
| } |
| |
| sub sourceDir |
| { |
| determineSourceDir(); |
| return $sourceDir; |
| } |
| |
| sub productDir |
| { |
| determineConfigurationProductDir(); |
| return $configurationProductDir; |
| } |
| |
| sub configuration() |
| { |
| determineConfiguration(); |
| return $configuration; |
| } |
| |
| sub configurationForVisualStudio() |
| { |
| determineConfigurationForVisualStudio(); |
| return $configurationForVisualStudio; |
| } |
| |
| sub currentSVNRevision |
| { |
| determineCurrentSVNRevision(); |
| return $currentSVNRevision; |
| } |
| |
| sub XcodeOptions |
| { |
| determineBaseProductDir(); |
| determineConfiguration(); |
| return (@baseProductDirOption, "-configuration", $configuration); |
| } |
| |
| sub XcodeOptionString |
| { |
| return join " ", XcodeOptions(); |
| } |
| |
| sub XcodeOptionStringNoConfig |
| { |
| return join " ", @baseProductDirOption; |
| } |
| |
| my $passedConfiguration; |
| my $searchedForPassedConfiguration; |
| sub determinePassedConfiguration |
| { |
| return if $searchedForPassedConfiguration; |
| $searchedForPassedConfiguration = 1; |
| for my $i (0 .. $#ARGV) { |
| my $opt = $ARGV[$i]; |
| if ($opt =~ /^--debug$/i || $opt =~ /^--devel/i) { |
| splice(@ARGV, $i, 1); |
| $passedConfiguration = "Debug"; |
| return; |
| } |
| if ($opt =~ /^--release$/i || $opt =~ /^--deploy/i) { |
| splice(@ARGV, $i, 1); |
| $passedConfiguration = "Release"; |
| return; |
| } |
| } |
| $passedConfiguration = undef; |
| } |
| |
| sub passedConfiguration |
| { |
| determinePassedConfiguration(); |
| return $passedConfiguration; |
| } |
| |
| sub setConfiguration |
| { |
| if (my $config = shift @_) { |
| $configuration = $config; |
| return; |
| } |
| |
| determinePassedConfiguration(); |
| $configuration = $passedConfiguration if $passedConfiguration; |
| } |
| |
| sub safariPathFromSafariBundle |
| { |
| my ($safariBundle) = @_; |
| |
| return "$safariBundle/Contents/MacOS/Safari" if isOSX(); |
| return $safariBundle if isCygwin(); |
| } |
| |
| sub installedSafariPath |
| { |
| my $safariBundle; |
| |
| if (isOSX()) { |
| $safariBundle = "/Applications/Safari.app"; |
| } elsif (isCygwin()) { |
| my $findSafariName = "FindSafari"; |
| $findSafariName .= "_debug" if $configuration ne "Release"; |
| $findSafariName .= ".exe"; |
| |
| $safariBundle = `"$configurationProductDir/$findSafariName"`; |
| $safariBundle =~ s/[\r\n]+$//; |
| $safariBundle = `cygpath -u '$safariBundle'`; |
| $safariBundle =~ s/[\r\n]+$//; |
| $safariBundle .= "Safari.exe"; |
| } |
| |
| return safariPathFromSafariBundle($safariBundle); |
| } |
| |
| # Locate Safari. |
| sub safariPath |
| { |
| # Use WEBKIT_SAFARI environment variable if present. |
| my $safariBundle = $ENV{WEBKIT_SAFARI}; |
| if (!$safariBundle) { |
| determineConfigurationProductDir(); |
| # Use Safari.app in product directory if present (good for Safari development team). |
| if (isOSX() && -d "$configurationProductDir/Safari.app") { |
| $safariBundle = "$configurationProductDir/Safari.app"; |
| } elsif (isCygwin() && -x "$configurationProductDir/bin/Safari.exe") { |
| $safariBundle = "$configurationProductDir/bin/Safari.exe"; |
| } else { |
| return installedSafariPath(); |
| } |
| } |
| my $safariPath = safariPathFromSafariBundle($safariBundle); |
| die "Can't find executable at $safariPath.\n" if isOSX() && !-x $safariPath; |
| return $safariPath; |
| } |
| |
| sub builtDylibPathForName |
| { |
| my $framework = shift; |
| determineConfigurationProductDir(); |
| if (isQt() or isGtk()) { |
| return "$configurationProductDir/$framework"; |
| } |
| if (isOSX()) { |
| return "$configurationProductDir/$framework.framework/Versions/A/$framework"; |
| } |
| if (isCygwin()) { |
| if ($framework eq "JavaScriptCore") { |
| return "$baseProductDir/lib/$framework.lib"; |
| } else { |
| return "$baseProductDir/$framework.intermediate/$configuration/$framework.intermediate/$framework.lib"; |
| } |
| } |
| |
| die "Unsupported platform, can't determine built library locations."; |
| } |
| |
| # Check to see that all the frameworks are built. |
| sub checkFrameworks |
| { |
| return if isCygwin(); |
| my @frameworks = ("JavaScriptCore", "WebCore"); |
| push(@frameworks, "WebKit") if isOSX(); |
| for my $framework (@frameworks) { |
| my $path = builtDylibPathForName($framework); |
| die "Can't find built framework at \"$path\".\n" unless -x $path; |
| } |
| } |
| |
| sub hasSVGSupport |
| { |
| return 0 if isCygwin(); |
| |
| my $path = shift; |
| |
| if (isQt()) { |
| return 1; |
| } |
| |
| if (isGtk() and $path =~ /WebCore/) { |
| $path .= "/../lib/libWebKitGtk.so" if !$ENV{WEBKITAUTOTOOLS}; |
| $path .= "/../.libs/libWebKitGtk.so" if $ENV{WEBKITAUTOTOOLS}; |
| } |
| |
| my $hasSVGSupport = 0; |
| if (-e $path) { |
| open NM, "-|", "nm", $path or die; |
| while (<NM>) { |
| $hasSVGSupport = 1 if /SVGElement/; |
| } |
| close NM; |
| } |
| return $hasSVGSupport; |
| } |
| |
| sub removeLibraryDependingOnSVG |
| { |
| my $frameworkName = shift; |
| my $shouldHaveSVG = shift; |
| |
| my $path = builtDylibPathForName($frameworkName); |
| return unless -x $path; |
| |
| my $hasSVG = hasSVGSupport($path); |
| system "rm -f $path" if ($shouldHaveSVG xor $hasSVG); |
| } |
| |
| sub checkWebCoreSVGSupport |
| { |
| my $required = shift; |
| my $framework = "WebCore"; |
| my $path = builtDylibPathForName($framework); |
| my $hasSVG = hasSVGSupport($path); |
| if ($required && !$hasSVG) { |
| die "$framework at \"$path\" does not include SVG Support, please run build-webkit --svg\n"; |
| } |
| return $hasSVG; |
| } |
| |
| sub isQt() |
| { |
| determineIsQt(); |
| return $isQt; |
| } |
| |
| sub checkArgv($) |
| { |
| my $argToCheck = shift; |
| foreach my $opt (@ARGV) { |
| if ($opt =~ /^$argToCheck/i ) { |
| @ARGV = grep(!/^$argToCheck/i, @ARGV); |
| return 1; |
| } |
| } |
| return 0; |
| } |
| |
| sub determineIsQt() |
| { |
| return if defined($isQt); |
| |
| # Allow override in case QTDIR is not set. |
| if (checkArgv("--qt")) { |
| $isQt = 1; |
| return; |
| } |
| |
| # The presence of QTDIR only means Qt if --gtk is not on the command-line |
| if (isGtk()) { |
| $isQt = 0; |
| return; |
| } |
| |
| $isQt = defined($ENV{'QTDIR'}); |
| } |
| |
| sub isGtk() |
| { |
| determineIsGtk(); |
| return $isGtk; |
| } |
| |
| sub determineIsGtk() |
| { |
| return if defined($isGtk); |
| |
| if (checkArgv("--gtk")) { |
| $isGtk = 1; |
| } else { |
| $isGtk = 0; |
| } |
| } |
| |
| sub isWx() |
| { |
| determineIsWx(); |
| return $isWx; |
| } |
| |
| sub determineIsWx() |
| { |
| return if defined($isWx); |
| |
| if (checkArgv("--wx")) { |
| $isWx = 1; |
| } else { |
| $isWx = 0; |
| } |
| } |
| |
| # Determine if this is debian, ubuntu, linspire, or something similar. |
| sub isDebianBased() |
| { |
| return -e "/etc/debian_version"; |
| } |
| |
| sub isCygwin() |
| { |
| return ($^O eq "cygwin"); |
| } |
| |
| sub isDarwin() |
| { |
| return ($^O eq "darwin"); |
| } |
| |
| sub isOSX() |
| { |
| return isDarwin() unless (isQt() or isGtk() or isWx()); |
| return 0; |
| } |
| |
| sub determineOSXVersion() |
| { |
| return if $osXVersion; |
| |
| if (!isOSX()) { |
| $osXVersion = -1; |
| return; |
| } |
| |
| my $version = `sw_vers -productVersion`; |
| my @splitVersion = split(/\./, $version); |
| @splitVersion >= 2 or die "Invalid version $version"; |
| $osXVersion = { |
| "major" => $splitVersion[0], |
| "minor" => $splitVersion[1], |
| "subminor" => (defined($splitVersion[2]) ? $splitVersion[2] : 0), |
| }; |
| } |
| |
| sub osXVersion() |
| { |
| determineOSXVersion(); |
| return $osXVersion; |
| } |
| |
| sub isTiger() |
| { |
| return isOSX() && osXVersion()->{"minor"} == 4; |
| } |
| |
| sub isLeopard() |
| { |
| return isOSX() && osXVersion()->{"minor"} == 5; |
| } |
| |
| sub relativeScriptsDir() |
| { |
| my $scriptDir = File::Spec->catpath("", File::Spec->abs2rel(dirname($0), getcwd()), ""); |
| if ($scriptDir eq "") { |
| $scriptDir = "."; |
| } |
| return $scriptDir; |
| } |
| |
| sub launcherPath() |
| { |
| my $relativeScriptsPath = relativeScriptsDir(); |
| if (isGtk() || isQt()) { |
| return "$relativeScriptsPath/run-launcher"; |
| } elsif (isOSX() || isCygwin()) { |
| return "$relativeScriptsPath/run-safari"; |
| } |
| } |
| |
| sub launcherName() |
| { |
| if (isGtk()) { |
| return "GtkLauncher"; |
| } elsif (isQt()) { |
| return "QtLauncher"; |
| } elsif (isOSX() || isCygwin()) { |
| return "Safari"; |
| } |
| } |
| |
| sub checkRequiredSystemConfig |
| { |
| if (isOSX()) { |
| chomp(my $productVersion = `sw_vers -productVersion`); |
| if ($productVersion lt "10.4") { |
| print "*************************************************************\n"; |
| print "Mac OS X Version 10.4.0 or later is required to build WebKit.\n"; |
| print "You have " . $productVersion . ", thus the build will most likely fail.\n"; |
| print "*************************************************************\n"; |
| } |
| my $xcodeVersion = `xcodebuild -version`; |
| if ($xcodeVersion !~ /DevToolsCore-(\d+)/ || $1 < 747) { |
| print "*************************************************************\n"; |
| print "Xcode Version 2.3 or later is required to build WebKit.\n"; |
| print "You have an earlier version of Xcode, thus the build will\n"; |
| print "most likely fail. The latest Xcode is available from the web:\n"; |
| print "http://developer.apple.com/tools/xcode\n"; |
| print "*************************************************************\n"; |
| } |
| } elsif (isGtk() or isQt() or isWx()) { |
| my @cmds = qw(flex bison gperf); |
| my @missing = (); |
| foreach my $cmd (@cmds) { |
| if (not `$cmd --version`) { |
| push @missing, $cmd; |
| } |
| } |
| if (@missing) { |
| my $list = join ", ", @missing; |
| die "ERROR: $list missing but required to build WebKit.\n"; |
| } |
| } |
| # Win32 and other platforms may want to check for minimum config |
| } |
| |
| sub setupCygwinEnv() |
| { |
| return if !isCygwin(); |
| return if $vcBuildPath; |
| |
| my $programFilesPath = `cygpath "$ENV{'PROGRAMFILES'}"`; |
| chomp $programFilesPath; |
| $vcBuildPath = "$programFilesPath/Microsoft Visual Studio 8/Common7/IDE/devenv.com"; |
| if (! -e $vcBuildPath) { |
| # VC++ not found, try VC++ Express |
| my $vsInstallDir; |
| if ($ENV{'VSINSTALLDIR'}) { |
| $vsInstallDir = $ENV{'VSINSTALLDIR'}; |
| } else { |
| $programFilesPath = $ENV{'PROGRAMFILES'} || "C:\\Program Files"; |
| $vsInstallDir = "$programFilesPath/Microsoft Visual Studio 8"; |
| } |
| $vsInstallDir = `cygpath "$vsInstallDir"`; |
| chomp $vsInstallDir; |
| $vcBuildPath = "$vsInstallDir/Common7/IDE/VCExpress.exe"; |
| if (! -e $vcBuildPath) { |
| print "*************************************************************\n"; |
| print "Cannot find '$vcBuildPath'\n"; |
| print "Please execute the file 'vcvars32.bat' from\n"; |
| print "'$programFilesPath\\Microsoft Visual Studio 8\\VC\\bin\\'\n"; |
| print "to setup the necessary environment variables.\n"; |
| print "*************************************************************\n"; |
| die; |
| } |
| } |
| |
| my $qtSDKPath = "$programFilesPath/QuickTime SDK"; |
| if (0 && ! -e $qtSDKPath) { |
| print "*************************************************************\n"; |
| print "Cannot find '$qtSDKPath'\n"; |
| print "Please download the QuickTime SDK for Windows from\n"; |
| print "http://developer.apple.com/quicktime/download/\n"; |
| print "*************************************************************\n"; |
| die; |
| } |
| |
| chomp($ENV{'WEBKITLIBRARIESDIR'} = `cygpath -wa "$sourceDir/WebKitLibraries/win"`) unless $ENV{'WEBKITLIBRARIESDIR'}; |
| |
| $windowsTmpPath = `cygpath -w /tmp`; |
| chomp $windowsTmpPath; |
| print "Building results into: ", baseProductDir(), "\n"; |
| print "WEBKITOUTPUTDIR is set to: ", $ENV{"WEBKITOUTPUTDIR"}, "\n"; |
| print "WEBKITLIBRARIESDIR is set to: ", $ENV{"WEBKITLIBRARIESDIR"}, "\n"; |
| } |
| |
| sub buildVisualStudioProject |
| { |
| my ($project, $clean) = @_; |
| setupCygwinEnv(); |
| |
| my $config = configurationForVisualStudio(); |
| |
| chomp(my $winProjectPath = `cygpath -w "$project"`); |
| |
| my $command = "/build"; |
| if ($clean) { |
| $command = "/clean"; |
| } |
| |
| print "$vcBuildPath $winProjectPath /build $config\n"; |
| return system $vcBuildPath, $winProjectPath, $command, $config; |
| } |
| |
| sub qtMakeCommand($) |
| { |
| my ($qmakebin) = @_; |
| chomp(my $mkspec = `$qmakebin -query QMAKE_MKSPECS`); |
| $mkspec .= "/default"; |
| |
| my $compiler = ""; |
| open SPEC, "<$mkspec/qmake.conf" or return "make"; |
| while (<SPEC>) { |
| if ($_ =~ /QMAKE_CC\s*=\s*([^\s]+)/) { |
| $compiler = $1; |
| } |
| } |
| close SPEC; |
| |
| #print "default spec: " . $mkspec . "\n"; |
| #print "compiler found: " . $compiler . "\n"; |
| |
| if ($compiler eq "cl") { |
| return "nmake"; |
| } |
| |
| return "make"; |
| } |
| |
| sub autotoolsFlag($$) |
| { |
| my ($flag, $feature) = @_; |
| my $prefix = $flag ? "--enable" : "--disable"; |
| |
| return $prefix . '-' . $feature; |
| } |
| |
| sub buildAutotoolsProject($@) |
| { |
| my ($clean, @buildArgs) = @_; |
| |
| my $make = 'make'; |
| my $dir = productDir(); |
| my $config = passedConfiguration() || configuration(); |
| my $prefix = $ENV{"WebKitInstallationPrefix"}; |
| |
| # check if configuration is Debug |
| if ($config =~ m/debug/i) { |
| push @buildArgs, "--enable-debug"; |
| } else { |
| push @buildArgs, "--disable-debug"; |
| } |
| |
| if (! -d $dir) { |
| system "mkdir", "-p", "$dir"; |
| if (! -d $dir) { |
| die "Failed to create build directory " . $dir; |
| } |
| } |
| |
| chdir $dir or die "Failed to cd into " . $dir . "\n"; |
| |
| my $result; |
| if ($clean) { |
| $result = system $make, "distclean"; |
| return $result; |
| } |
| |
| print "Calling configure in " . $dir . "\n\n"; |
| print "Installation directory: $prefix\n" if(defined($prefix)); |
| |
| $result = system "$sourceDir/autogen.sh", @buildArgs; |
| if ($result ne 0) { |
| die "Failed to setup build environment using 'autotools'!\n"; |
| } |
| |
| $result = system $make; |
| if ($result ne 0) { |
| die "\nFailed to build WebKit using '$make'!\n"; |
| } |
| |
| chdir ".." or die; |
| return $result; |
| } |
| |
| sub buildQMakeProject($@) |
| { |
| my ($clean, @buildArgs) = @_; |
| |
| push @buildArgs, "-r"; |
| |
| my $qmakebin = "qmake"; # Allow override of the qmake binary from $PATH |
| for my $i (0 .. $#ARGV) { |
| my $opt = $ARGV[$i]; |
| if ($opt =~ /^--qmake=(.*)/i ) { |
| $qmakebin = $1; |
| } elsif ($opt =~ /^--qmakearg=(.*)/i ) { |
| push @buildArgs, $1; |
| } |
| } |
| |
| my $make = qtMakeCommand($qmakebin); |
| my $config = configuration(); |
| my $prefix = $ENV{"WebKitInstallationPrefix"}; |
| |
| push @buildArgs, "OUTPUT_DIR=" . baseProductDir() . "/$config"; |
| push @buildArgs, sourceDir() . "/WebKit.pro"; |
| if ($config =~ m/debug/i) { |
| push @buildArgs, "CONFIG-=release"; |
| push @buildArgs, "CONFIG+=debug"; |
| } else { |
| push @buildArgs, "CONFIG+=release"; |
| push @buildArgs, "CONFIG-=debug"; |
| } |
| |
| my $dir = baseProductDir(); |
| if (! -d $dir) { |
| system "mkdir", "-p", "$dir"; |
| if (! -d $dir) { |
| die "Failed to create product directory " . $dir; |
| } |
| } |
| $dir = $dir . "/$config"; |
| if (! -d $dir) { |
| system "mkdir", "-p", "$dir"; |
| if (! -d $dir) { |
| die "Failed to create build directory " . $dir; |
| } |
| } |
| |
| chdir $dir or die "Failed to cd into " . $dir . "\n"; |
| |
| print "Calling '$qmakebin @buildArgs' in " . $dir . "\n\n"; |
| print "Installation directory: $prefix\n" if(defined($prefix)); |
| |
| my $result = system $qmakebin, @buildArgs; |
| if ($result ne 0) { |
| die "Failed to setup build environment using $qmakebin!\n"; |
| } |
| |
| if ($clean) { |
| $result = system "$make distclean"; |
| } else { |
| $result = system "$make"; |
| } |
| |
| chdir ".." or die; |
| return $result; |
| } |
| |
| sub buildQMakeQtProject($$) |
| { |
| my ($project, $clean) = @_; |
| |
| my @buildArgs = ("CONFIG+=qt-port"); |
| return buildQMakeProject($clean, @buildArgs); |
| } |
| |
| sub buildGtkProject($$@) |
| { |
| my ($project, $clean, @buildArgs) = @_; |
| |
| if ($project ne "WebKit") { |
| die "The Gtk port builds JavaScriptCore, WebCore and WebKit in one shot! Only call it for 'WebKit'.\n"; |
| } |
| |
| if ($ENV{WEBKITAUTOTOOLS}) { |
| return buildAutotoolsProject($clean, @buildArgs); |
| } else { |
| my @buildArgs = ("CONFIG+=gtk-port", "CONFIG-=qt"); |
| return buildQMakeProject($clean, @buildArgs); |
| } |
| } |
| |
| sub setPathForRunningWebKitApp |
| { |
| my ($env) = @_; |
| |
| return unless isCygwin(); |
| |
| $env->{PATH} = join(':', productDir(), dirname(installedSafariPath()), $env->{PATH} || ""); |
| } |
| |
| sub exitStatus($) |
| { |
| my ($returnvalue) = @_; |
| if ($^O eq "MSWin32") { |
| return $returnvalue >> 8; |
| } |
| return WEXITSTATUS($returnvalue); |
| } |
| |
| sub runSafari |
| { |
| my ($debugger) = @_; |
| |
| if (isOSX()) { |
| return system "$FindBin::Bin/gdb-safari", @ARGV if $debugger; |
| |
| my $productDir = productDir(); |
| print "Starting Safari with DYLD_FRAMEWORK_PATH set to point to built WebKit in $productDir.\n"; |
| $ENV{DYLD_FRAMEWORK_PATH} = $productDir; |
| $ENV{WEBKIT_UNSET_DYLD_FRAMEWORK_PATH} = "YES"; |
| return system safariPath(), @ARGV; |
| } |
| |
| if (isCygwin()) { |
| my $script = "run-webkit-nightly.cmd"; |
| my $result = system "cp", "$FindBin::Bin/$script", productDir(); |
| return $result if $result; |
| |
| my $cwd = getcwd(); |
| chdir productDir(); |
| |
| my $debuggerFlag = $debugger ? "/debugger" : ""; |
| $result = system "cmd", "/c", "call $script $debuggerFlag"; |
| chdir $cwd; |
| return $result; |
| } |
| |
| return 1; |
| } |
| |
| sub runDrosera |
| { |
| my ($debugger) = @_; |
| |
| if (isOSX()) { |
| return system "$FindBin::Bin/gdb-drosera", @ARGV if $debugger; |
| |
| my $productDir = productDir(); |
| print "Starting Drosera with DYLD_FRAMEWORK_PATH set to point to built WebKit in $productDir.\n"; |
| $ENV{DYLD_FRAMEWORK_PATH} = $productDir; |
| $ENV{WEBKIT_UNSET_DYLD_FRAMEWORK_PATH} = "YES"; |
| |
| my $droseraPath = "$productDir/Drosera.app/Contents/MacOS/Drosera"; |
| return system $droseraPath, @ARGV; |
| } |
| |
| if (isCygwin()) { |
| print "Running Drosera\n"; |
| my $script = "run-drosera-nightly.cmd"; |
| my $prodDir = productDir(); |
| my $result = system "cp", "$FindBin::Bin/$script", $prodDir; |
| return $result if $result; |
| |
| my $cwd = getcwd(); |
| chdir $prodDir; |
| |
| my $debuggerFlag = $debugger ? "/debugger" : ""; |
| $result = system "cmd", "/c", "call $script $debuggerFlag"; |
| chdir $cwd; |
| return $result; |
| } |
| |
| return 1; |
| } |
| |
| 1; |
