Source/WebKitLegacy/win/Interfaces/Accessible2/Accessible2.idl

/*************************************************************************
 *
 *  File Name (Accessible2.idl)
 * 
 *  IAccessible2 IDL Specification 
 * 
 *  Copyright (c) 2007, 2013 Linux Foundation 
 *  Copyright (c) 2006 IBM Corporation 
 *  Copyright (c) 2000, 2006 Sun Microsystems, Inc. 
 *  All rights reserved. 
 *   
 *   
 *  Redistribution and use in source and binary forms, with or without 
 *  modification, are permitted provided that the following conditions 
 *  are met: 
 *   
 *   1. Redistributions of source code must retain the above copyright 
 *      notice, this list of conditions and the following disclaimer. 
 *   
 *   2. Redistributions in binary form must reproduce the above 
 *      copyright notice, this list of conditions and the following 
 *      disclaimer in the documentation and/or other materials 
 *      provided with the distribution. 
 *
 *   3. Neither the name of the Linux Foundation nor the names of its 
 *      contributors may be used to endorse or promote products 
 *      derived from this software without specific prior written 
 *      permission. 
 *   
 *  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND 
 *  CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, 
 *  INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF 
 *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 
 *  DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR 
 *  CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 
 *  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT 
 *  NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 
 *  LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 
 *  HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 
 *  CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR 
 *  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, 
 *  EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 
 *   
 *  This BSD License conforms to the Open Source Initiative "Simplified 
 *  BSD License" as published at: 
 *  http://www.opensource.org/licenses/bsd-license.php 
 *   
 *  IAccessible2 is a trademark of the Linux Foundation. The IAccessible2 
 *  mark may be used in accordance with the Linux Foundation Trademark 
 *  Policy to indicate compliance with the IAccessible2 specification. 
 * 
 ************************************************************************/ 

/** @mainpage

 @section _interfaces Interfaces
  IAccessible2\n
  IAccessible2_2\n
  IAccessibleAction\n
  IAccessibleApplication\n
  IAccessibleComponent\n
  IAccessibleDocument\n
  IAccessibleEditableText\n
  IAccessibleHypertext\n
  IAccessibleHypertext2\n
  IAccessibleHyperlink\n
  IAccessibleImage\n
  IAccessibleRelation\n
  IAccessibleTable [Deprecated]\n
  IAccessibleTable2\n
  IAccessibleTableCell\n
  IAccessibleText\n
  IAccessibleText2\n
  IAccessibleValue

 @section _structs Structs
  IA2Locale\n
  IA2TableModelChange\n
  IA2TextSegment

 @section _enums Enums
  ::IA2Actions values are predefined actions for use when implementing support for HTML5 media.\n
  ::IA2CoordinateType values define the requested coordinate type (screen or parent window).\n
  ::IA2EventID values identify events.\n
  ::IA2Role values defines roles which are in addition to the existing MSAA roles.\n
  ::IA2ScrollType values define where to place an object or substring on the screen.\n
  ::IA2States values define states which are in addition to the existing MSAA states.\n
  ::IA2TableModelChangeType values describe the kinds of changes made to a table (insert, delete, update).\n
  ::IA2TextBoundaryType values define the requested text unit (character, word, sentence, line, paragraph).\n
  ::IA2TextSpecialOffsets values define special offsets for use in the text interfaces.

 @section _constants Constants
  @ref grpRelations

 @section _misc Miscellaneous
  @ref _licensePage "BSD License"\n
  @ref _generalInfo "General Information"\n

 @page _licensePage BSD License
  %IAccessible2 IDL Specification

  Copyright (c) 2007, 2013 Linux Foundation\n
  Copyright (c) 2006 IBM Corporation\n
  Copyright (c) 2000, 2006 Sun Microsystems, Inc.\n
  All rights reserved.

  Redistribution and use in source and binary forms, with or without 
  modification, are permitted provided that the following conditions 
  are met: 
    
   1. Redistributions of source code must retain the above copyright 
      notice, this list of conditions and the following disclaimer. 
 
   2. Redistributions in binary form must reproduce the above 
      copyright notice, this list of conditions and the following 
      disclaimer in the documentation and/or other materials 
      provided with the distribution. 
 
   3. Neither the name of the Linux Foundation nor the names of its 
      contributors may be used to endorse or promote products 
      derived from this software without specific prior written 
      permission. 
 
  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND 
  CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, 
  INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF 
  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 
  DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR 
  CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 
  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT 
  NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 
  LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 
  HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 
  CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR 
  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, 
  EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 
 
  This BSD License conforms to the Open Source Initiative "Simplified 
  BSD License" as published at: 
  http://www.opensource.org/licenses/bsd-license.php 
 
  %IAccessible2 is a trademark of the Linux Foundation. The %IAccessible2 
  mark may be used in accordance with the
  <a href="http://www.linuxfoundation.org/collaborate/workgroups/accessibility/trademark-policy">
  Linux Foundation Trademark Policy</a> to indicate compliance with the %IAccessible2 specification. 

 @page _generalInfo General Information 
  The following information is applicable to two or more interfaces.

 @ref _errors\n
 @ref _memory\n
 &nbsp;&nbsp;@ref _arrayConsideration\n
 @ref _indexes\n
 @ref _enums\n
 @ref _specialOffsets\n
 @ref _dicoveringInterfaces\n
 @ref _changingInterfaces\n
 @ref _applicationInfo\n
 @ref _childIDs\n
 @ref _variants\n
 @ref _iaaction-iahyperlink\n
 @ref _trademark

 @section _errors Error Handling
  HRESULT values are defined by the Microsoft&reg; Win32&reg; API.  For more information, refer to
  <a href="http://msdn.microsoft.com/en-us/library/windows/desktop/aa378137%28v=vs.85%29.aspx">
  Interpreting HRESULT Values</a> in MSDN&reg;.

  Note that the S_FALSE return value is considered a non-error value and the 
  SUCCEEDED macro will return TRUE.  S_FALSE is used when there is no failure
  but there was nothing valid to return, e.g. in IAccessible2::attributes when
  there are no attributes.  When S_FALSE is returned [out] pointer types should 
  be NULL and [out] longs should generally be 0, but sometimes -1 is used such
  as IAccessible2::indexInParent, IAccessibleText::caretOffset, and
  IAccessibleHypertext::hyperlinkIndex.

  Note that for BSTR [out] variables common COM practice is that the server does 
  the SysAllocString and the client does the SysFreeString.  Also note that when
  NULL is returned there is no need for the client to call SysFreeString.  Please
  refer to the documentation for each method for more details regarding error handling.

 @section _memory Memory Management
  The following memory management issues should be considered:
  @li Although [out] BSTR variables are declared by the client, their space is 
   allocated by the server.  They need to be freed with SysFreeString by the 
   client at end of life; the same is true when BSTRs are used in structs or 
   arrays which are passed to the server.
  @li If there is no valid [out] BSTR to return, the server should return S_FALSE and 
   assign NULL to the output, e.g. *theOutBSTR = NULL;. 
  @li COM interfaces need to be referenced with AddRef when used and dereferenced
   with Release at end of life.
  @li Single [out] longs, HWNDs, booleans, and structs are declared by the caller
   and passed by reference. The marshaller does all the memory management.
  
  The following articles may be helpful for understanding memory management issues:
  @li An article by Don Box in a
   <a href="http://www.microsoft.com/msj/1196/activex1196.aspx">Q & A section</a>
   of the November 1996 edition of the Microsoft Systems Journal.
  @li A posting to a CodeGuru forum, 
   <a href="http://www.codeguru.com/forum/showthread.php?t=364511">Windows SDK 
   String: What are the rules for BSTR allocation and deallocation?</a>

 @subsection _arrayConsideration Special Consideration when using Arrays
  There are several methods which return arrays.  In the case of IAccessible2::relations
  and IAccessibleRelation::targets the client must allocate and free the arrays.

  For the remaining methods which return arrays, the server must allocate the array
  and the client must free the array when no longer needed.  These methods are
  IAccessible2::extendedStates, IAccessible2::localizedExtendedStates,
  IAccessible2_2::relationTargetsOfType, IAccessibleAction::keyBinding, 
  IAccessibleHypertext2::hyperlinks, IAccessibleTable::selectedChildren, 
  IAccessibleTable::selectedColumns, IAccessibleTable::selectedRows,
  IAccessibleTable2::selectedCells, IAccessibleTable2::selectedColumns,
  IAccessibleTable2::selectedRows, IAccessibleTableCell::columnHeaderCells,
  and IAccessibleTableCell::rowHeaderCells.
  For those methods, the server must allocate both the top level array and any storage 
  associated with it, e.g. for BSTRs.  The server must allocate the arrays with 
  CoTaskMemAlloc and any BSTRs with SysAllocString.  The client must use CoTaskMemFree
  to free the array and any BSTRs must be freed with SysFreeString.  
  
  Also, the IDL for IAccessible2::extendedStates, IAccessible2::localizedExtendedStates, 
  IAccessibleAction::keyBinding, IAccessibleTable::selectedChildren, 
  IAccessibleTable::selectedColumns, and IAccessibleTable::selectedRows includes an
  extraneous [in] parameter for the caller to specify the max size of the array.
  This parameter will be ignored by the COM server.

 @section _indexes Zero and One Based Indexes
  Unless otherwise specified all offsets and indexes are 0 based. 

 @section _enums Enums
  Note that enums start at 0.

 @section _specialOffsets Special Offsets for use in the IAccessibleText and IAccessibleEditableText Methods
  IAccessibleText and IAccessibleEditableText can use one or more of the following
  special offset values.  They are defined in the ::IA2TextSpecialOffsets enum.
  @li Using ::IA2_TEXT_OFFSET_LENGTH (-1) as an offset in any of the IAccessibleText or
   IAccessibleEditableText methods is the same as specifying the length of the string.
  @li Using ::IA2_TEXT_OFFSET_CARET (-2) as an offset for IAccessibleText::textBeforeOffset, 
   IAccessibleText::textAtOffset, and IAccessibleText::textAfterOffset indicates that the 
   text related to the physical location of the caret should be used.  This is needed for 
   applications that consider the character offset of the end of one line (as reached by 
   pressing the End key) the same as the offset of the first character on the next line.
   Since the same offset is associated with two different lines a special means is needed 
   to fetch text from the line where the caret is physically located.

 @section _dicoveringInterfaces Discovery of Interfaces
  In general AT (Assistive Technology) should try IAccessible2 interfaces, followed by using 
  the MSAA (Microsoft&reg; Active Accessibility&reg;) interfaces.  (In cases where the an application
  is known to have custom interfaces which provide information not supplied by IAccessible2
  or MSAA, then those custom interfaces can be used.)  The AT can then, by default, support
  unknown IAccessible2/MSAA applications, without the application developers having to request
  AT vendors for support on an individual application by application basis.

  When you have a reference to an IAccessible and require a reference to an IAccessible2 use 
  QueryService as follows:
  @code
  // pAcc is a reference to the accessible object's IAccessible interface. 
  IServiceProvider *pService = NULL; 
  hr = pAcc->QueryInterface(IID_IServiceProvider, (void **)&pService); 
  if(SUCCEEDED(hr)) { 
    IAccessible2 *pIA2 = NULL; 
    hr = pService->QueryService(IID_IAccessible, IID_IAccessible2, (void**)&pIA2); 
    if (SUCCEEDED(hr) && pIA2) { 
      // The control supports IAccessible2. 
      // pIA2 is the reference to the accessible object's IAccessible2 interface.
    } 
  } 
  @endcode

  @section _changingInterfaces Changing between Accessible Interfaces
  Note that developers must always implement MSAA's IAccessible and, if needed, some
  of the interfaces in the set of IAccessible2 interfaces.  Although the IAccessible2
  IDL is coded such that IAccessible2 is a subclass of MSAA's IAccessible, none of
  MSAA's IAccessible methods are redefined by IAccessible2.

  QueryService must be used to switch from a reference to an MSAA IAccessible interface 
  to another interface.  This has been 
  <a href="http://www.atia.org/files/public/Introducing_IAccessibleEx.doc">
  documented</a> and the pertinent facts have been extracted below: 

  @par 
   Why use QueryService instead of just using QueryInterface to get IAccessibleEx 
   directly? The reason is that since MSAA 2.0, clients don't talk to a server's 
   IAccessible interface directly; instead they talk to an intermediate MSAA-provided 
   wrapper that calls through to the original IAccessible. This wrapper provides services 
   such as implementing IDispatch, supplying information from MSAA 2.0's Dynamic Annotation 
   service, and scaling locations when running on Windows Vista with DPI scaling enabled. 
   QueryService is the supported way to expose additional interfaces from an existing 
   IAccessible and was originally used by MSHTML to expose IHTMLElement objects corresponding 
   to IAccessibles. QueryService is often more convenient for servers to implement than 
   QueryInterface because it does not have the same requirements for preserving object 
   identity or symmetry/transitivity as QueryInterface, so QueryService allows servers to 
   easily implement the interface on the same object or a separate object. The latter is 
   often hard to do with QueryInterface unless the original object supports aggregation. 

  Two related references in MSDN&reg; are: 
  @li <a href="http://msdn.microsoft.com/en-us/library/ms696078(VS.85).aspx">
  "Using QueryService to expose a native object model interface for an IAccessible object"</a>
  @li <a href="http://msdn.microsoft.com/en-us/library/ms528415.aspx#acc_obj"> 
  "Accessing the Internet Explorer Object Associated with an Accessible Object"</a>

  Based on this information from Microsoft, QueryService must be used to switch back and forth 
  between a reference to an MSAA IAccessible interface and any of the IAccessible2 interfaces. 

  Regarding switching between any of the IAccessible2 interfaces, applications implementing
  IAccessible2 should implement the IAccessible2 interfaces on a single object since ATs
  will be using QueryInterface to switch between the IAccessilbe2 interfaces.  Implementing
  the IAccessible2 interfaces on separate objects would require the use of QueryService.
  There is one exception, IAccessibleApplication can be implemented on a separate object so
  its common code doesn't have to be included in each accessible object.  ATs should use
  QueryService to access IAccessibleApplication.

 @section _applicationInfo Access to Information about the Application
  Servers implementing IAccessible2 should provide access to the IAccessibleApplication 
  interface via QueryService from any object so that ATs can easily determine specific 
  information about the application such as its name or version.

 @section _childIDs Child IDs
  The IAccessible2 interfaces do not support child IDs, i.e. simple child elements.
  Full accessible objects must be created for each object that supports IAccessible2.
  Therefore MSAA's get_accChild should never return a child ID (other than CHILDID_SELF)
  for an object that implements any of the IAccessible2 interfaces.

  Microsoft's UI Automation specification has the same limitation and this was resolved
  in the UI Automation Express specification by adding IAccessibleEx::GetObjectForChild
  and IAccessibleEx::GetIAccessiblePair.  These methods allow mapping back and forth 
  between an IAccessibleEx and an {IAccessible, Child ID} pair.  A future version of 
  IAccessible2 may include similar methods to map back and forth between an IAccessible2
  and an {IAccessible, Child ID} pair.

 @section _variants VARIANTs
  Some methods return a VARIANT.  Implementers need to make sure that the return type is 
  specified, i.e. VT_I4, VT_IDISPATCH, etc.  The methods that return VARIANTs are 
  IAccessibleHyperlink::anchor, IAccessibleHyperlink::anchorTarget, IAccessibleValue::currentValue,
  IAccessibleValue::maximumValue, IAccessibleValue::minimumValue.

 @section _iaaction-iahyperlink IAccessibleHyperlink as subclass of IAccessibleAction
  In this version of the IDL, IAccessibleHyperlink is a subclass of IAccessibleAction.  
  However, there is no practical need for that inheritance and in some cases, such as
  an image map of smart tags, it doesn't make sense because such an image map doesn't 
  have actionable objects; it's the secondary smart tags that are actionable.  As a 
  result, implementations should not rely on the inheritance as it may be removed in 
  a later version of the IDL.

 @section _trademark Trademark Attribution
  The names of actual companies and products mentioned herein may be the trademarks of
  their respective owners.  In particular, Active Accessibility, Microsoft, MSDN, and Win32
  are trademarks of the Microsoft group of companies in the U.S.A. and/or other countries.

**/

midl_pragma warning(disable: 2111)
midl_pragma warning(disable: 2402)

import "objidl.idl";
import "oaidl.idl";
import "oleacc.idl";
import "AccessibleRelation.idl";
import "AccessibleStates.idl";
import "IA2CommonTypes.idl";

/** A structure defining the locale of an accessible object.
 
IAccessible2::locale returns this struct.
*/
typedef struct IA2Locale {
  BSTR language; ///< ISO 639-1 Alpha-2 two character language code
  BSTR country;  ///< ISO 3166-1 Alpha-2 two character country code
  BSTR variant;  ///< Application specific variant of the locale
} IA2Locale;

/** @brief This interface exposes the primary set of information about an
 IAccessible2 enabled accessible object.

 This interface must always be provided for objects that support some
 portion of the collection of the %IAccessible2 interfaces.

 Please refer to @ref _changingInterfaces "Changing between Accessible Interfaces"
 for special considerations related to use of the MSAA IAccessible interface and 
 the set of %IAccessible2 interfaces.
 */
[object, uuid(E89F726E-C4F4-4c19-BB19-B647D7FA8478)]
interface IAccessible2 : IAccessible
{

  /** @brief Returns the number of accessible relations for this object.
   @param [out] nRelations
   @retval S_OK
  */
  [propget] HRESULT nRelations
    (
     [out, retval] long *nRelations
    );

  /** @brief Returns one accessible relation for this object.
   @param [in] relationIndex
     0 based
   @param [out] relation
   @retval S_OK
   @retval E_INVALIDARG if bad [in] passed
  */
  [propget] HRESULT relation
    (
     [in] long relationIndex,
     [out, retval] IAccessibleRelation **relation
    );

  /** @brief Returns multiple accessible relations for this object.
   @param [in] maxRelations
     maximum size of the array allocated by the client
   @param [out] relations
    The array of accessible relation objects.  Note that this array is to be
    allocated by the client and freed when no longer needed.  Refer to @ref 
    _arrayConsideration "Special Consideration when using Arrays" for more details.
   @param [out] nRelations 
    actual number of relations in the returned array (not more than maxRelations)
   @retval S_OK
   @retval S_FALSE if there are no relations, nRelations is set to 0
   @note As a performant alternative, client code should consider using IAccessible2_2::relationTargetsOfType.
  */
  [propget] HRESULT relations
    (
     [in] long maxRelations, 
     [out, size_is(maxRelations), length_is(*nRelations)]
       IAccessibleRelation **relations, 
     [out, retval] long *nRelations 
    );

  /** @brief Returns the role of an %IAccessible2 object.
   @param [out] role
    The role of an %IAccessible2 object.
   @retval S_OK
   @note 
   @li For convenience MSAA roles are also passed through this method so the
    AT doesn't have to also fetch roles through MSAA's get_accRole.
   @li %IAccessible2 roles should not be passed through MSAA's get_accRole.
   @li For compatibility with non IAccessible2 enabled ATs, IAccessible2 
    applications should also add support to get_accRole to return the closest 
    MSAA role or ROLE_SYSTEM_CLIENT (the MSAA defined default role) if there 
    is not a good match.  
   @li This method is missing a [propget] prefix in the IDL.  The result is the
    method is named role in generated C++ code instead of get_role.
  */
  HRESULT role
    (
     [out, retval] long *role
    );

  /** @brief Makes an object visible on the screen.
   @param [in] scrollType
    Defines where the object should be placed on the screen.
   @retval S_OK
   @retval E_INVALIDARG if bad [in] passed
  */
  HRESULT scrollTo
    (
     [in] enum IA2ScrollType scrollType 
    );

  /** @brief Moves the top left of an object to a specified location.

   @param [in] coordinateType
    Specifies whether the coordinates are relative to the screen or the parent object.
   @param [in] x
    Defines the x coordinate.
   @param [in] y
    Defines the y coordinate.
   @retval S_OK
   @retval E_INVALIDARG if bad [in] passed
  */
  HRESULT scrollToPoint
    (
     [in] enum IA2CoordinateType coordinateType,
     [in] long x,
     [in] long y 
    );

  /** @brief Returns grouping information.
   
   Used for tree items, list items, tab panel labels, radio buttons, etc.
   Also used for collections of non-text objects.

   @param [out] groupLevel
    1 based, 0 indicates that this value is not applicable
   @param [out] similarItemsInGroup
    1 based, 0 indicates that this value is not applicable
   @param [out] positionInGroup
    1 based, 0 indicates that this value is not applicable. This is an index
    into the objects in the current group, not an index into all the objects
    at the same group level.
   @retval S_OK if at least one value is valid
   @retval S_FALSE if no values are valid, [out] values are 0s
   @note This method is meant to describe the nature of an object's containment
    structure.  It's exposed by trees, tree grids, nested lists, nested menus,
    but not headings, which uses the level object attribute.  It is also exposed
    by radio buttons (with groupLevel == 0).
   @note This is normally not implemented on a combo box to describe the nature
    of its contents.  Normally an AT will get that information from its child list 
    object.  However, in some cases when non-edit combo boxes are not able to be structured
    such that the list is a child of the combo box, this method is implemented on
    the combo box itself. ATs can use this interface if a child list is not found.
  */
  [propget] HRESULT groupPosition
    (
     [out] long *groupLevel,
     [out] long *similarItemsInGroup,
     [out, retval] long *positionInGroup 
    );

  /** @brief Returns the bit strip containing any IAccessible2 states.
  
   The IAccessible2 states are in addition to the MSAA states and are defined in
   the IA2States enum.

   @param [out] states
   @retval S_OK
  */
  [propget] HRESULT states
    (
     [out, retval] AccessibleStates *states
    );

  /** @brief Returns the extended role.
   
   An extended role is a role which is dynamically generated by the application.
   It is not predefined by the %IAccessible2 specification.
   
   @param [out] extendedRole
   @retval S_OK
   @retval S_FALSE if there is nothing to return, [out] value is NULL
  */
  [propget] HRESULT extendedRole
    (
     [out, retval] BSTR *extendedRole
    );

  /** @brief Returns the localized extended role.
   @param [out] localizedExtendedRole
   @retval S_OK
   @retval S_FALSE if there is nothing to return, [out] value is NULL
  */
  [propget] HRESULT localizedExtendedRole
    (
     [out, retval] BSTR *localizedExtendedRole
    );

  /** @brief Returns the number of extended states.
   @param [out] nExtendedStates
   @retval S_OK
  */
  [propget] HRESULT nExtendedStates
    (
     [out, retval] long *nExtendedStates
    );

  /** @brief Returns the extended states (array of strings).

   An extended state is a state which is dynamically generated by the application.
   It is not predefined by the %IAccessible2 specification.

   @param [in] maxExtendedStates
    This parameter is ignored. Refer to @ref _arrayConsideration 
    "Special Consideration when using Arrays" for more details.
   @param [out] extendedStates
    This array is allocated by the server.  The client must free it with CoTaskMemFree.
   @param [out] nExtendedStates
    The number of extended states returned; the size of the returned array.
   @retval S_OK
   @retval S_FALSE if there are no states, [out] values are NULL and 0 respectively
  */
  [propget] HRESULT extendedStates
    (
     [in] long maxExtendedStates,
     [out, size_is(,maxExtendedStates), length_is(,*nExtendedStates)] BSTR **extendedStates,
     [out, retval] long *nExtendedStates
    );

  /** @brief Returns the localized extended states (array of strings).

   @param [in] maxLocalizedExtendedStates
    This parameter is ignored. Refer to @ref _arrayConsideration 
    "Special Consideration when using Arrays" for more details.
   @param [out] localizedExtendedStates
    This array is allocated by the server.  The client must free it with CoTaskMemFree. 
   @param [out] nLocalizedExtendedStates
    The number of localized extended states returned; the size of the returned array.
   @retval S_OK
   @retval S_FALSE if there are no states, [out] values are NULL and 0 respectively
  */
  [propget] HRESULT localizedExtendedStates
    (
     [in] long maxLocalizedExtendedStates,
     [out, size_is(,maxLocalizedExtendedStates), length_is(,*nLocalizedExtendedStates)] BSTR **localizedExtendedStates,
     [out, retval] long *nLocalizedExtendedStates
    );

  /** @brief Returns the unique ID.
   
   The uniqueID is an identifier for this object, is unique within the
   current window, and remains the same for the lifetime of the accessible
   object. 
   
   The uniqueID is not related to:
   - the MSAA objectID which is used by the server to disambiguate between
   IAccessibles per HWND or
   - the MSAA childID which is used to disambiguate between children being
   managed by an IAccessible.

   This value is provided so the AT can have access to a unique runtime persistent 
   identifier even when not handling an event for the object.
   
   An example of when this value is useful is if the AT wants to build a cache. 
   The AT could cache the uniqueIDs in addition to other data being cached. 
   When an event is fired the AT could map the uniqueID to its internal model.
   Thus, if there's a REORDER/SHOW/HIDE event the AT knows which part of the 
   internal structure has been invalidated and can refetch just that part.

   This value can also be used by an AT to determine when the current control
   has changed. If the role is the same for two controls that are adjacent in 
   the tab order, this can be used to detect the new control.

   Another use of this value by an AT is to identify when a grouping object has 
   changed, e.g. when moving from a radio button in one group to a radio button in a 
   different group.

   One means of implementing this would be to create a factory with a 32 bit number 
   generator and a reuse pool.  The number generator would emit numbers starting 
   at 1.  Each time an object's life cycle ended, its number would be saved into a 
   reuse pool.  The number generator would be used whenever the reuse pool was empty.

   Another way to create a unique ID is to generate it from a pointer value, e.g. an
   object's address. That would be unique because no two active objects can use the
   same allocated memory space.

   @param [out] uniqueID
   @retval S_OK
  */
  [propget] HRESULT uniqueID
    (
     [out, retval] long *uniqueID
    );

  /** @brief Returns the window handle for the parent window which contains this object.

   This is the same window handle which will be passed for any events that occur on the 
   object, but is cached in the accessible object for use when it would be helpful to 
   access the window handle in cases where an event isn't fired on this object.

   A use case is when a screen reader is grabbing an entire web page on a page load. 
   Without the availability of windowHandle, the AT would have to get the window handle
   by using WindowFromAccessibleObject on each IAccessible, which is slow because it's 
   implemented by oleacc.dll as a loop which crawls up the ancestor chain and looks for 
   a ROLE_WINDOW object, mapping that back to a window handle.
   
   @param [out] windowHandle
   @retval S_OK
  */
  [propget] HRESULT windowHandle
    (
     [out, retval] HWND *windowHandle
    );
 
  /** @brief Returns the index of this object in its parent object.
   @param [out] indexInParent
     0 based; -1 indicates there is no parent; the upper bound is the value 
     returned by the parent's IAccessible::get_accChildCount.
   @retval S_OK
   @retval S_FALSE if no parent, [out] value is -1
  */
  [propget] HRESULT indexInParent
    (
     [out, retval] long *indexInParent
    );

  /** @brief Returns the IA2Locale of the accessible object. 
   @param [out] locale
   @retval S_OK
  */
  [propget] HRESULT locale
    (
     [out, retval] IA2Locale *locale
    );

  /** @brief Returns the attributes specific to this object, such as a cell's formula.
   @param [out] attributes
   @retval S_OK
   @retval S_FALSE returned if there is nothing to return, [out] value is NULL
  */
  [propget] HRESULT attributes
    (
     [out, retval] BSTR *attributes
    );

}