| /* |
| * Copyright (C) 2016 Igalia S.L. All rights reserved. |
| * Copyright (C) 2016 Apple Inc. All rights reserved. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions |
| * are met: |
| * 1. Redistributions of source code must retain the above copyright |
| * notice, this list of conditions and the following disclaimer. |
| * 2. Redistributions in binary form must reproduce the above copyright |
| * notice, this list of conditions and the following disclaimer in the |
| * documentation and/or other materials provided with the distribution. |
| * |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS |
| * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT |
| * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR |
| * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT |
| * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, |
| * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT |
| * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, |
| * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY |
| * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT |
| * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE |
| * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| */ |
| |
| #include "config.h" |
| #include "MathOperator.h" |
| |
| #if ENABLE(MATHML) |
| |
| #include "RenderStyle.h" |
| #include "StyleInheritedData.h" |
| |
| static const unsigned kRadicalOperator = 0x221A; |
| static const unsigned kMaximumExtensionCount = 128; |
| |
| namespace WebCore { |
| |
| static inline FloatRect boundsForGlyph(const GlyphData& data) |
| { |
| return data.font ? data.font->boundsForGlyph(data.glyph) : FloatRect(); |
| } |
| |
| static inline float heightForGlyph(const GlyphData& data) |
| { |
| return boundsForGlyph(data).height(); |
| } |
| |
| static inline void getAscentAndDescentForGlyph(const GlyphData& data, LayoutUnit& ascent, LayoutUnit& descent) |
| { |
| FloatRect bounds = boundsForGlyph(data); |
| ascent = -bounds.y(); |
| descent = bounds.maxY(); |
| } |
| |
| static inline float advanceWidthForGlyph(const GlyphData& data) |
| { |
| return data.font ? data.font->widthForGlyph(data.glyph) : 0; |
| } |
| |
| // FIXME: This hardcoded data can be removed when OpenType MATH font are widely available (http://wkbug/156837). |
| struct StretchyCharacter { |
| UChar32 character; |
| UChar topChar; |
| UChar extensionChar; |
| UChar bottomChar; |
| UChar middleChar; |
| }; |
| // The first leftRightPairsCount pairs correspond to left/right fences that can easily be mirrored in RTL. |
| static const short leftRightPairsCount = 5; |
| static const StretchyCharacter stretchyCharacters[14] = { |
| { 0x28 , 0x239b, 0x239c, 0x239d, 0x0 }, // left parenthesis |
| { 0x29 , 0x239e, 0x239f, 0x23a0, 0x0 }, // right parenthesis |
| { 0x5b , 0x23a1, 0x23a2, 0x23a3, 0x0 }, // left square bracket |
| { 0x5d , 0x23a4, 0x23a5, 0x23a6, 0x0 }, // right square bracket |
| { 0x7b , 0x23a7, 0x23aa, 0x23a9, 0x23a8 }, // left curly bracket |
| { 0x7d , 0x23ab, 0x23aa, 0x23ad, 0x23ac }, // right curly bracket |
| { 0x2308, 0x23a1, 0x23a2, 0x23a2, 0x0 }, // left ceiling |
| { 0x2309, 0x23a4, 0x23a5, 0x23a5, 0x0 }, // right ceiling |
| { 0x230a, 0x23a2, 0x23a2, 0x23a3, 0x0 }, // left floor |
| { 0x230b, 0x23a5, 0x23a5, 0x23a6, 0x0 }, // right floor |
| { 0x7c , 0x7c, 0x7c, 0x7c, 0x0 }, // vertical bar |
| { 0x2016, 0x2016, 0x2016, 0x2016, 0x0 }, // double vertical line |
| { 0x2225, 0x2225, 0x2225, 0x2225, 0x0 }, // parallel to |
| { 0x222b, 0x2320, 0x23ae, 0x2321, 0x0 } // integral sign |
| }; |
| |
| MathOperator::MathOperator() |
| { |
| m_variantGlyph = 0; |
| } |
| |
| void MathOperator::setOperator(const RenderStyle& style, UChar32 baseCharacter, Type operatorType) |
| { |
| m_baseCharacter = baseCharacter; |
| m_operatorType = operatorType; |
| reset(style); |
| } |
| |
| void MathOperator::reset(const RenderStyle& style) |
| { |
| m_stretchType = StretchType::Unstretched; |
| m_maxPreferredWidth = 0; |
| m_width = 0; |
| m_ascent = 0; |
| m_descent = 0; |
| m_italicCorrection = 0; |
| m_radicalVerticalScale = 1; |
| |
| // We use the base size for the calculation of the preferred width. |
| GlyphData baseGlyph; |
| if (!getBaseGlyph(style, baseGlyph)) |
| return; |
| m_maxPreferredWidth = m_width = advanceWidthForGlyph(baseGlyph); |
| getAscentAndDescentForGlyph(baseGlyph, m_ascent, m_descent); |
| |
| if (m_operatorType == Type::VerticalOperator) |
| calculateStretchyData(style, true); // We also take into account the width of larger sizes for the calculation of the preferred width. |
| else if (m_operatorType == Type::DisplayOperator) |
| calculateDisplayStyleLargeOperator(style); // We can directly select the size variant and determine the final metrics. |
| } |
| |
| LayoutUnit MathOperator::stretchSize() const |
| { |
| ASSERT(m_operatorType == Type::VerticalOperator || m_operatorType == Type::HorizontalOperator); |
| return m_operatorType == Type::VerticalOperator ? m_ascent + m_descent : m_width; |
| } |
| |
| bool MathOperator::getGlyph(const RenderStyle& style, UChar32 character, GlyphData& glyph) const |
| { |
| glyph = style.fontCascade().glyphDataForCharacter(character, !style.isLeftToRightDirection()); |
| return glyph.font && glyph.font == &style.fontCascade().primaryFont(); |
| } |
| |
| void MathOperator::setSizeVariant(const GlyphData& sizeVariant) |
| { |
| ASSERT(sizeVariant.font); |
| ASSERT(sizeVariant.font->mathData()); |
| m_stretchType = StretchType::SizeVariant; |
| m_variantGlyph = sizeVariant.glyph; |
| m_width = advanceWidthForGlyph(sizeVariant); |
| getAscentAndDescentForGlyph(sizeVariant, m_ascent, m_descent); |
| } |
| |
| static GlyphData glyphDataForCodePointOrFallbackGlyph(const RenderStyle& style, UChar32 codePoint, Glyph fallbackGlyph) |
| { |
| if (codePoint) |
| return style.fontCascade().glyphDataForCharacter(codePoint, false); |
| |
| GlyphData fallback; |
| |
| if (fallbackGlyph) { |
| fallback.glyph = fallbackGlyph; |
| fallback.font = &style.fontCascade().primaryFont(); |
| } |
| |
| return fallback; |
| } |
| |
| void MathOperator::setGlyphAssembly(const RenderStyle& style, const GlyphAssemblyData& assemblyData) |
| { |
| ASSERT(m_operatorType == Type::VerticalOperator || m_operatorType == Type::HorizontalOperator); |
| m_stretchType = StretchType::GlyphAssembly; |
| m_assembly = assemblyData; |
| |
| auto topOrRight = glyphDataForCodePointOrFallbackGlyph(style, m_assembly.topOrRightCodePoint, m_assembly.topOrRightFallbackGlyph); |
| auto extension = glyphDataForCodePointOrFallbackGlyph(style, m_assembly.extensionCodePoint, m_assembly.extensionFallbackGlyph); |
| auto middle = glyphDataForCodePointOrFallbackGlyph(style, m_assembly.middleCodePoint, m_assembly.middleFallbackGlyph); |
| auto bottomOrLeft = glyphDataForCodePointOrFallbackGlyph(style, m_assembly.bottomOrLeftCodePoint, m_assembly.bottomOrLeftFallbackGlyph); |
| |
| if (m_operatorType == Type::VerticalOperator) { |
| m_width = 0; |
| m_width = std::max(m_width, LayoutUnit(advanceWidthForGlyph(topOrRight))); |
| m_width = std::max(m_width, LayoutUnit(advanceWidthForGlyph(extension))); |
| m_width = std::max(m_width, LayoutUnit(advanceWidthForGlyph(bottomOrLeft))); |
| m_width = std::max(m_width, LayoutUnit(advanceWidthForGlyph(middle))); |
| } else { |
| m_ascent = 0; |
| m_descent = 0; |
| LayoutUnit ascent, descent; |
| getAscentAndDescentForGlyph(bottomOrLeft, ascent, descent); |
| m_ascent = std::max(m_ascent, ascent); |
| m_descent = std::max(m_descent, descent); |
| getAscentAndDescentForGlyph(extension, ascent, descent); |
| m_ascent = std::max(m_ascent, ascent); |
| m_descent = std::max(m_descent, descent); |
| getAscentAndDescentForGlyph(topOrRight, ascent, descent); |
| m_ascent = std::max(m_ascent, ascent); |
| m_descent = std::max(m_descent, descent); |
| getAscentAndDescentForGlyph(middle, ascent, descent); |
| m_ascent = std::max(m_ascent, ascent); |
| m_descent = std::max(m_descent, descent); |
| } |
| } |
| |
| // The MathML specification recommends avoiding combining characters. |
| // See https://www.w3.org/TR/MathML/chapter7.html#chars.comb-chars |
| // However, many math fonts do not provide constructions for the non-combining equivalent. |
| const unsigned maxFallbackPerCharacter = 3; |
| static const UChar32 characterFallback[][maxFallbackPerCharacter] = { |
| { 0x005E, 0x0302, 0 }, // CIRCUMFLEX ACCENT |
| { 0x005F, 0x0332, 0 }, // LOW LINE |
| { 0x007E, 0x0303, 0 }, // TILDE |
| { 0x00AF, 0x0304, 0x0305 }, // MACRON |
| { 0x02C6, 0x0302, 0 }, // MODIFIER LETTER CIRCUMFLEX ACCENT |
| { 0x02C7, 0x030C, 0 } // CARON |
| }; |
| const unsigned characterFallbackSize = WTF_ARRAY_LENGTH(characterFallback); |
| |
| void MathOperator::getMathVariantsWithFallback(const RenderStyle& style, bool isVertical, Vector<Glyph>& sizeVariants, Vector<OpenTypeMathData::AssemblyPart>& assemblyParts) |
| { |
| // In general, we first try and find contruction for the base glyph. |
| GlyphData baseGlyph; |
| if (!getBaseGlyph(style, baseGlyph) || !baseGlyph.font->mathData()) |
| return; |
| baseGlyph.font->mathData()->getMathVariants(baseGlyph.glyph, isVertical, sizeVariants, assemblyParts); |
| if (!sizeVariants.isEmpty() || !assemblyParts.isEmpty()) |
| return; |
| |
| // Otherwise, we try and find fallback constructions using similar characters. |
| for (unsigned i = 0; i < characterFallbackSize; i++) { |
| unsigned j = 0; |
| if (characterFallback[i][j] == m_baseCharacter) { |
| for (j++; j < maxFallbackPerCharacter && characterFallback[i][j]; j++) { |
| GlyphData glyphData; |
| if (!getGlyph(style, characterFallback[i][j], glyphData)) |
| continue; |
| glyphData.font->mathData()->getMathVariants(glyphData.glyph, isVertical, sizeVariants, assemblyParts); |
| if (!sizeVariants.isEmpty() || !assemblyParts.isEmpty()) |
| return; |
| } |
| break; |
| } |
| } |
| } |
| |
| void MathOperator::calculateDisplayStyleLargeOperator(const RenderStyle& style) |
| { |
| ASSERT(m_operatorType == Type::DisplayOperator); |
| |
| GlyphData baseGlyph; |
| if (!getBaseGlyph(style, baseGlyph) || !baseGlyph.font->mathData()) |
| return; |
| |
| // The value of displayOperatorMinHeight is sometimes too small, so we ensure that it is at least \sqrt{2} times the size of the base glyph. |
| float displayOperatorMinHeight = std::max(heightForGlyph(baseGlyph) * sqrtOfTwoFloat, baseGlyph.font->mathData()->getMathConstant(*baseGlyph.font, OpenTypeMathData::DisplayOperatorMinHeight)); |
| |
| Vector<Glyph> sizeVariants; |
| Vector<OpenTypeMathData::AssemblyPart> assemblyParts; |
| baseGlyph.font->mathData()->getMathVariants(baseGlyph.glyph, true, sizeVariants, assemblyParts); |
| |
| // We choose the first size variant that is larger than the expected displayOperatorMinHeight and otherwise fallback to the largest variant. |
| for (auto& sizeVariant : sizeVariants) { |
| GlyphData glyphData(sizeVariant, baseGlyph.font); |
| setSizeVariant(glyphData); |
| m_maxPreferredWidth = m_width; |
| m_italicCorrection = glyphData.font->mathData()->getItalicCorrection(*glyphData.font, glyphData.glyph); |
| if (heightForGlyph(glyphData) >= displayOperatorMinHeight) |
| break; |
| } |
| } |
| |
| bool MathOperator::calculateGlyphAssemblyFallback(const Vector<OpenTypeMathData::AssemblyPart>& assemblyParts, GlyphAssemblyData& assemblyData) const |
| { |
| // The structure of the Open Type Math table is a bit more general than the one currently used by the MathOperator code, so we try to fallback in a reasonable way. |
| // FIXME: MathOperator should support the most general format (https://bugs.webkit.org/show_bug.cgi?id=130327). |
| // We use the approach of the copyComponents function in github.com/mathjax/MathJax-dev/blob/master/fonts/OpenTypeMath/fontUtil.py |
| |
| // We count the number of non extender pieces. |
| int nonExtenderCount = 0; |
| for (auto& part : assemblyParts) { |
| if (!part.isExtender) |
| nonExtenderCount++; |
| } |
| if (nonExtenderCount > 3) |
| return false; // This is not supported: there are too many pieces. |
| |
| // We now browse the list of pieces from left to right for horizontal operators and from bottom to top for vertical operators. |
| enum PartType { |
| Start, |
| ExtenderBetweenStartAndMiddle, |
| Middle, |
| ExtenderBetweenMiddleAndEnd, |
| End, |
| None |
| }; |
| PartType expectedPartType = Start; |
| assemblyData.extensionCodePoint = 0; |
| assemblyData.extensionFallbackGlyph = 0; |
| assemblyData.middleCodePoint = 0; |
| assemblyData.middleFallbackGlyph = 0; |
| for (auto& part : assemblyParts) { |
| if (nonExtenderCount < 3) { |
| // If we only have at most two non-extenders then we skip the middle glyph. |
| if (expectedPartType == ExtenderBetweenStartAndMiddle) |
| expectedPartType = ExtenderBetweenMiddleAndEnd; |
| else if (expectedPartType == Middle) |
| expectedPartType = End; |
| } |
| if (part.isExtender) { |
| if (!assemblyData.extensionFallbackGlyph) |
| assemblyData.extensionFallbackGlyph = part.glyph; // We copy the extender part. |
| else if (assemblyData.extensionFallbackGlyph != part.glyph) |
| return false; // This is not supported: the assembly has different extenders. |
| |
| switch (expectedPartType) { |
| case Start: |
| // We ignore the left/bottom part. |
| expectedPartType = ExtenderBetweenStartAndMiddle; |
| continue; |
| case Middle: |
| // We ignore the middle part. |
| expectedPartType = ExtenderBetweenMiddleAndEnd; |
| continue; |
| case End: |
| case None: |
| // This is not supported: we got an unexpected extender. |
| return false; |
| case ExtenderBetweenStartAndMiddle: |
| case ExtenderBetweenMiddleAndEnd: |
| // We ignore multiple consecutive extenders. |
| continue; |
| } |
| } |
| |
| switch (expectedPartType) { |
| case Start: |
| // We copy the left/bottom part. |
| assemblyData.bottomOrLeftFallbackGlyph = part.glyph; |
| assemblyData.bottomOrLeftCodePoint = 0; |
| expectedPartType = ExtenderBetweenStartAndMiddle; |
| continue; |
| case ExtenderBetweenStartAndMiddle: |
| case Middle: |
| // We copy the middle part. |
| assemblyData.middleFallbackGlyph = part.glyph; |
| expectedPartType = ExtenderBetweenMiddleAndEnd; |
| continue; |
| case ExtenderBetweenMiddleAndEnd: |
| case End: |
| // We copy the right/top part. |
| assemblyData.topOrRightFallbackGlyph = part.glyph; |
| assemblyData.topOrRightCodePoint = 0; |
| expectedPartType = None; |
| continue; |
| case None: |
| // This is not supported: we got an unexpected non-extender part. |
| return false; |
| } |
| } |
| |
| if (!assemblyData.hasExtension()) |
| return false; // This is not supported: we always assume that we have an extension glyph. |
| |
| // If we don't have top/bottom glyphs, we use the extension glyph. |
| if (!assemblyData.topOrRightCodePoint && !assemblyData.topOrRightFallbackGlyph) |
| assemblyData.topOrRightFallbackGlyph = assemblyData.extensionFallbackGlyph; |
| if (!assemblyData.bottomOrLeftCodePoint && !assemblyData.bottomOrLeftFallbackGlyph) |
| assemblyData.bottomOrLeftFallbackGlyph = assemblyData.extensionFallbackGlyph; |
| |
| return true; |
| } |
| |
| void MathOperator::calculateStretchyData(const RenderStyle& style, bool calculateMaxPreferredWidth, LayoutUnit targetSize) |
| { |
| ASSERT(m_operatorType == Type::VerticalOperator || m_operatorType == Type::HorizontalOperator); |
| ASSERT(!calculateMaxPreferredWidth || m_operatorType == Type::VerticalOperator); |
| bool isVertical = m_operatorType == Type::VerticalOperator; |
| |
| GlyphData baseGlyph; |
| if (!getBaseGlyph(style, baseGlyph)) |
| return; |
| |
| if (!calculateMaxPreferredWidth) { |
| // We do not stretch if the base glyph is large enough. |
| float baseSize = isVertical ? heightForGlyph(baseGlyph) : advanceWidthForGlyph(baseGlyph); |
| if (targetSize <= baseSize) |
| return; |
| } |
| |
| GlyphAssemblyData assemblyData; |
| if (baseGlyph.font->mathData()) { |
| Vector<Glyph> sizeVariants; |
| Vector<OpenTypeMathData::AssemblyPart> assemblyParts; |
| getMathVariantsWithFallback(style, isVertical, sizeVariants, assemblyParts); |
| // We verify the size variants. |
| for (auto& sizeVariant : sizeVariants) { |
| GlyphData glyphData(sizeVariant, baseGlyph.font); |
| if (calculateMaxPreferredWidth) |
| m_maxPreferredWidth = std::max(m_maxPreferredWidth, LayoutUnit(advanceWidthForGlyph(glyphData))); |
| else { |
| setSizeVariant(glyphData); |
| LayoutUnit size { isVertical ? heightForGlyph(glyphData) : advanceWidthForGlyph(glyphData) }; |
| if (size >= targetSize) |
| return; |
| } |
| } |
| |
| // We verify if there is a construction. |
| if (!calculateGlyphAssemblyFallback(assemblyParts, assemblyData)) |
| return; |
| } else { |
| if (!isVertical) |
| return; |
| |
| // If the font does not have a MATH table, we fallback to the Unicode-only constructions. |
| const StretchyCharacter* stretchyCharacter = nullptr; |
| const unsigned maxIndex = WTF_ARRAY_LENGTH(stretchyCharacters); |
| for (unsigned index = 0; index < maxIndex; ++index) { |
| if (stretchyCharacters[index].character == m_baseCharacter) { |
| stretchyCharacter = &stretchyCharacters[index]; |
| if (!style.isLeftToRightDirection() && index < leftRightPairsCount * 2) { |
| // If we are in right-to-left direction we select the mirrored form by adding -1 or +1 according to the parity of index. |
| index += index % 2 ? -1 : 1; |
| } |
| break; |
| } |
| } |
| |
| // Unicode contains U+23B7 RADICAL SYMBOL BOTTOM but it is generally not provided by fonts without a MATH table. |
| // Moreover, it's not clear what the proper vertical extender or top hook would be. |
| // Hence we fallback to scaling the base glyph vertically. |
| if (!calculateMaxPreferredWidth && m_baseCharacter == kRadicalOperator) { |
| LayoutUnit height = m_ascent + m_descent; |
| if (height > 0 && height < targetSize) { |
| m_radicalVerticalScale = targetSize.toFloat() / height; |
| m_ascent *= m_radicalVerticalScale; |
| m_descent *= m_radicalVerticalScale; |
| } |
| return; |
| } |
| |
| // If we didn't find a stretchy character set for this character, we don't know how to stretch it. |
| if (!stretchyCharacter) |
| return; |
| |
| // We convert the list of Unicode characters into a list of glyph data. |
| assemblyData.topOrRightCodePoint = stretchyCharacter->topChar; |
| assemblyData.extensionCodePoint = stretchyCharacter->extensionChar; |
| assemblyData.bottomOrLeftCodePoint = stretchyCharacter->bottomChar; |
| assemblyData.middleCodePoint = stretchyCharacter->middleChar; |
| } |
| |
| auto topOrRight = glyphDataForCodePointOrFallbackGlyph(style, assemblyData.topOrRightCodePoint, assemblyData.topOrRightFallbackGlyph); |
| auto extension = glyphDataForCodePointOrFallbackGlyph(style, assemblyData.extensionCodePoint, assemblyData.extensionFallbackGlyph); |
| auto middle = glyphDataForCodePointOrFallbackGlyph(style, assemblyData.middleCodePoint, assemblyData.middleFallbackGlyph); |
| auto bottomOrLeft = glyphDataForCodePointOrFallbackGlyph(style, assemblyData.bottomOrLeftCodePoint, assemblyData.bottomOrLeftFallbackGlyph); |
| |
| // If we are measuring the maximum width, verify each component. |
| if (calculateMaxPreferredWidth) { |
| m_maxPreferredWidth = std::max(m_maxPreferredWidth, LayoutUnit(advanceWidthForGlyph(topOrRight))); |
| m_maxPreferredWidth = std::max(m_maxPreferredWidth, LayoutUnit(advanceWidthForGlyph(extension))); |
| m_maxPreferredWidth = std::max(m_maxPreferredWidth, LayoutUnit(advanceWidthForGlyph(middle))); |
| m_maxPreferredWidth = std::max(m_maxPreferredWidth, LayoutUnit(advanceWidthForGlyph(bottomOrLeft))); |
| return; |
| } |
| |
| // We ensure that the size is large enough to avoid glyph overlaps. |
| float minSize = isVertical ? |
| heightForGlyph(topOrRight) + heightForGlyph(middle) + heightForGlyph(bottomOrLeft) |
| : advanceWidthForGlyph(bottomOrLeft) + advanceWidthForGlyph(middle) + advanceWidthForGlyph(topOrRight); |
| if (minSize > targetSize) |
| return; |
| |
| setGlyphAssembly(style, assemblyData); |
| } |
| |
| void MathOperator::stretchTo(const RenderStyle& style, LayoutUnit targetSize) |
| { |
| ASSERT(m_operatorType == Type::VerticalOperator || m_operatorType == Type::HorizontalOperator); |
| calculateStretchyData(style, false, targetSize); |
| if (m_stretchType == StretchType::GlyphAssembly) { |
| if (m_operatorType == Type::VerticalOperator) { |
| m_ascent = targetSize; |
| m_descent = 0; |
| } else |
| m_width = targetSize; |
| } |
| } |
| |
| LayoutRect MathOperator::paintGlyph(const RenderStyle& style, PaintInfo& info, const GlyphData& data, const LayoutPoint& origin, GlyphPaintTrimming trim) |
| { |
| FloatRect glyphBounds = boundsForGlyph(data); |
| |
| LayoutRect glyphPaintRect(origin, LayoutSize(glyphBounds.x() + glyphBounds.width(), glyphBounds.height())); |
| glyphPaintRect.setY(origin.y() + glyphBounds.y()); |
| |
| // In order to have glyphs fit snugly with one another we snap the connecting edges to pixel boundaries |
| // and trim off one pixel. The pixel trim is to account for fonts that have edge pixels that have less |
| // than full coverage. These edge pixels can introduce small seams between connected glyphs. |
| FloatRect clipBounds = info.rect; |
| switch (trim) { |
| case TrimTop: |
| glyphPaintRect.shiftYEdgeTo(glyphPaintRect.y().ceil() + 1); |
| clipBounds.shiftYEdgeTo(glyphPaintRect.y()); |
| break; |
| case TrimBottom: |
| glyphPaintRect.shiftMaxYEdgeTo(glyphPaintRect.maxY().floor() - 1); |
| clipBounds.shiftMaxYEdgeTo(glyphPaintRect.maxY()); |
| break; |
| case TrimTopAndBottom: |
| glyphPaintRect.shiftYEdgeTo(glyphPaintRect.y().ceil() + 1); |
| glyphPaintRect.shiftMaxYEdgeTo(glyphPaintRect.maxY().floor() - 1); |
| clipBounds.shiftYEdgeTo(glyphPaintRect.y()); |
| clipBounds.shiftMaxYEdgeTo(glyphPaintRect.maxY()); |
| break; |
| case TrimLeft: |
| glyphPaintRect.shiftXEdgeTo(glyphPaintRect.x().ceil() + 1); |
| clipBounds.shiftXEdgeTo(glyphPaintRect.x()); |
| break; |
| case TrimRight: |
| glyphPaintRect.shiftMaxXEdgeTo(glyphPaintRect.maxX().floor() - 1); |
| clipBounds.shiftMaxXEdgeTo(glyphPaintRect.maxX()); |
| break; |
| case TrimLeftAndRight: |
| glyphPaintRect.shiftXEdgeTo(glyphPaintRect.x().ceil() + 1); |
| glyphPaintRect.shiftMaxXEdgeTo(glyphPaintRect.maxX().floor() - 1); |
| clipBounds.shiftXEdgeTo(glyphPaintRect.x()); |
| clipBounds.shiftMaxXEdgeTo(glyphPaintRect.maxX()); |
| } |
| |
| // Clipping the enclosing IntRect avoids any potential issues at joined edges. |
| GraphicsContextStateSaver stateSaver(info.context()); |
| info.context().clip(clipBounds); |
| |
| GlyphBuffer buffer; |
| buffer.add(data.glyph, data.font, advanceWidthForGlyph(data)); |
| info.context().drawGlyphs(*data.font, buffer, 0, 1, origin, style.fontCascade().fontDescription().fontSmoothing()); |
| |
| return glyphPaintRect; |
| } |
| |
| void MathOperator::fillWithVerticalExtensionGlyph(const RenderStyle& style, PaintInfo& info, const LayoutPoint& from, const LayoutPoint& to) |
| { |
| ASSERT(m_operatorType == Type::VerticalOperator); |
| ASSERT(m_stretchType == StretchType::GlyphAssembly); |
| |
| auto extension = glyphDataForCodePointOrFallbackGlyph(style, m_assembly.extensionCodePoint, m_assembly.extensionFallbackGlyph); |
| |
| ASSERT(extension.font); |
| ASSERT(from.y() <= to.y()); |
| |
| // If there is no space for the extension glyph, we don't need to do anything. |
| if (from.y() == to.y()) |
| return; |
| |
| GraphicsContextStateSaver stateSaver(info.context()); |
| |
| FloatRect glyphBounds = boundsForGlyph(extension); |
| |
| // Clipping the extender region here allows us to draw the bottom extender glyph into the |
| // regions of the bottom glyph without worrying about overdraw (hairy pixels) and simplifies later clipping. |
| LayoutRect clipBounds = info.rect; |
| clipBounds.shiftYEdgeTo(from.y()); |
| clipBounds.shiftMaxYEdgeTo(to.y()); |
| info.context().clip(clipBounds); |
| |
| // Trimming may remove up to two pixels from the top of the extender glyph, so we move it up by two pixels. |
| float offsetToGlyphTop = glyphBounds.y() + 2; |
| LayoutPoint glyphOrigin { from.x(), LayoutUnit(from.y() - offsetToGlyphTop) }; |
| FloatRect lastPaintedGlyphRect(from, FloatSize()); |
| |
| // In practice, only small stretch sizes are requested but we limit the number of glyphs to avoid hangs. |
| for (unsigned extensionCount = 0; lastPaintedGlyphRect.maxY() < to.y() && extensionCount < kMaximumExtensionCount; extensionCount++) { |
| lastPaintedGlyphRect = paintGlyph(style, info, extension, glyphOrigin, TrimTopAndBottom); |
| glyphOrigin.setY(glyphOrigin.y() + lastPaintedGlyphRect.height()); |
| |
| // There's a chance that if the font size is small enough the glue glyph has been reduced to an empty rectangle |
| // with trimming. In that case we just draw nothing. |
| if (lastPaintedGlyphRect.isEmpty()) |
| break; |
| } |
| } |
| |
| void MathOperator::fillWithHorizontalExtensionGlyph(const RenderStyle& style, PaintInfo& info, const LayoutPoint& from, const LayoutPoint& to) |
| { |
| ASSERT(m_operatorType == Type::HorizontalOperator); |
| ASSERT(m_stretchType == StretchType::GlyphAssembly); |
| |
| auto extension = glyphDataForCodePointOrFallbackGlyph(style, m_assembly.extensionCodePoint, m_assembly.extensionFallbackGlyph); |
| |
| ASSERT(extension.font); |
| ASSERT(from.x() <= to.x()); |
| ASSERT(from.y() == to.y()); |
| |
| // If there is no space for the extension glyph, we don't need to do anything. |
| if (from.x() == to.x()) |
| return; |
| |
| GraphicsContextStateSaver stateSaver(info.context()); |
| |
| // Clipping the extender region here allows us to draw the bottom extender glyph into the |
| // regions of the bottom glyph without worrying about overdraw (hairy pixels) and simplifies later clipping. |
| LayoutRect clipBounds = info.rect; |
| clipBounds.shiftXEdgeTo(from.x()); |
| clipBounds.shiftMaxXEdgeTo(to.x()); |
| info.context().clip(clipBounds); |
| |
| // Trimming may remove up to two pixels from the left of the extender glyph, so we move it left by two pixels. |
| float offsetToGlyphLeft = -2; |
| LayoutPoint glyphOrigin { LayoutUnit(from.x() + offsetToGlyphLeft), from.y() }; |
| FloatRect lastPaintedGlyphRect(from, FloatSize()); |
| |
| // In practice, only small stretch sizes are requested but we limit the number of glyphs to avoid hangs. |
| for (unsigned extensionCount = 0; lastPaintedGlyphRect.maxX() < to.x() && extensionCount < kMaximumExtensionCount; extensionCount++) { |
| lastPaintedGlyphRect = paintGlyph(style, info, extension, glyphOrigin, TrimLeftAndRight); |
| glyphOrigin.setX(glyphOrigin.x() + lastPaintedGlyphRect.width()); |
| |
| // There's a chance that if the font size is small enough the glue glyph has been reduced to an empty rectangle |
| // with trimming. In that case we just draw nothing. |
| if (lastPaintedGlyphRect.isEmpty()) |
| break; |
| } |
| } |
| |
| void MathOperator::paintVerticalGlyphAssembly(const RenderStyle& style, PaintInfo& info, const LayoutPoint& paintOffset) |
| { |
| ASSERT(m_operatorType == Type::VerticalOperator); |
| ASSERT(m_stretchType == StretchType::GlyphAssembly); |
| |
| auto topOrRight = glyphDataForCodePointOrFallbackGlyph(style, m_assembly.topOrRightCodePoint, m_assembly.topOrRightFallbackGlyph); |
| auto bottomOrLeft = glyphDataForCodePointOrFallbackGlyph(style, m_assembly.bottomOrLeftCodePoint, m_assembly.bottomOrLeftFallbackGlyph); |
| |
| ASSERT(topOrRight.font); |
| ASSERT(bottomOrLeft.font); |
| if (!topOrRight.font || !bottomOrLeft.font) { |
| LOG_ERROR("MathML: no font can be found for Unicode code point."); |
| return; |
| } |
| |
| // We are positioning the glyphs so that the edge of the tight glyph bounds line up exactly with the edges of our paint box. |
| LayoutPoint operatorTopLeft = paintOffset; |
| FloatRect topGlyphBounds = boundsForGlyph(topOrRight); |
| LayoutPoint topGlyphOrigin { operatorTopLeft.x(), LayoutUnit(operatorTopLeft.y() - topGlyphBounds.y()) }; |
| LayoutRect topGlyphPaintRect = paintGlyph(style, info, topOrRight, topGlyphOrigin, TrimBottom); |
| |
| FloatRect bottomGlyphBounds = boundsForGlyph(bottomOrLeft); |
| LayoutPoint bottomGlyphOrigin { operatorTopLeft.x(), LayoutUnit(operatorTopLeft.y() + stretchSize() - (bottomGlyphBounds.height() + bottomGlyphBounds.y())) }; |
| LayoutRect bottomGlyphPaintRect = paintGlyph(style, info, bottomOrLeft, bottomGlyphOrigin, TrimTop); |
| |
| if (m_assembly.hasMiddle()) { |
| auto middle = glyphDataForCodePointOrFallbackGlyph(style, m_assembly.middleCodePoint, m_assembly.middleFallbackGlyph); |
| |
| // Center the glyph origin between the start and end glyph paint extents. Then shift it half the paint height toward the bottom glyph. |
| FloatRect middleGlyphBounds = boundsForGlyph(middle); |
| LayoutPoint middleGlyphOrigin(operatorTopLeft.x(), topGlyphOrigin.y()); |
| middleGlyphOrigin.moveBy(LayoutPoint(0, (bottomGlyphPaintRect.y() - topGlyphPaintRect.maxY()) / 2.0)); |
| middleGlyphOrigin.moveBy(LayoutPoint(0, middleGlyphBounds.height() / 2.0)); |
| |
| LayoutRect middleGlyphPaintRect = paintGlyph(style, info, middle, middleGlyphOrigin, TrimTopAndBottom); |
| fillWithVerticalExtensionGlyph(style, info, topGlyphPaintRect.minXMaxYCorner(), middleGlyphPaintRect.minXMinYCorner()); |
| fillWithVerticalExtensionGlyph(style, info, middleGlyphPaintRect.minXMaxYCorner(), bottomGlyphPaintRect.minXMinYCorner()); |
| } else |
| fillWithVerticalExtensionGlyph(style, info, topGlyphPaintRect.minXMaxYCorner(), bottomGlyphPaintRect.minXMinYCorner()); |
| } |
| |
| void MathOperator::paintHorizontalGlyphAssembly(const RenderStyle& style, PaintInfo& info, const LayoutPoint& paintOffset) |
| { |
| ASSERT(m_operatorType == Type::HorizontalOperator); |
| ASSERT(m_stretchType == StretchType::GlyphAssembly); |
| |
| auto topOrRight = glyphDataForCodePointOrFallbackGlyph(style, m_assembly.topOrRightCodePoint, m_assembly.topOrRightFallbackGlyph); |
| auto bottomOrLeft = glyphDataForCodePointOrFallbackGlyph(style, m_assembly.bottomOrLeftCodePoint, m_assembly.bottomOrLeftFallbackGlyph); |
| |
| ASSERT(bottomOrLeft.font); |
| ASSERT(topOrRight.font); |
| if (!topOrRight.font || !bottomOrLeft.font) { |
| LOG_ERROR("MathML: no font can be found for Unicode code point."); |
| return; |
| } |
| |
| // We are positioning the glyphs so that the edge of the tight glyph bounds line up exactly with the edges of our paint box. |
| LayoutPoint operatorTopLeft = paintOffset; |
| LayoutUnit baselineY = operatorTopLeft.y() + m_ascent; |
| LayoutPoint leftGlyphOrigin(operatorTopLeft.x(), baselineY); |
| LayoutRect leftGlyphPaintRect = paintGlyph(style, info, bottomOrLeft, leftGlyphOrigin, TrimRight); |
| |
| FloatRect rightGlyphBounds = boundsForGlyph(topOrRight); |
| LayoutPoint rightGlyphOrigin { LayoutUnit(operatorTopLeft.x() + stretchSize() - rightGlyphBounds.width()), baselineY }; |
| LayoutRect rightGlyphPaintRect = paintGlyph(style, info, topOrRight, rightGlyphOrigin, TrimLeft); |
| |
| if (m_assembly.hasMiddle()) { |
| auto middle = glyphDataForCodePointOrFallbackGlyph(style, m_assembly.middleCodePoint, m_assembly.middleFallbackGlyph); |
| |
| // Center the glyph origin between the start and end glyph paint extents. |
| LayoutPoint middleGlyphOrigin(operatorTopLeft.x(), baselineY); |
| middleGlyphOrigin.moveBy(LayoutPoint((rightGlyphPaintRect.x() - leftGlyphPaintRect.maxX()) / 2.0, 0)); |
| LayoutRect middleGlyphPaintRect = paintGlyph(style, info, middle, middleGlyphOrigin, TrimLeftAndRight); |
| fillWithHorizontalExtensionGlyph(style, info, LayoutPoint(leftGlyphPaintRect.maxX(), baselineY), LayoutPoint(middleGlyphPaintRect.x(), baselineY)); |
| fillWithHorizontalExtensionGlyph(style, info, LayoutPoint(middleGlyphPaintRect.maxX(), baselineY), LayoutPoint(rightGlyphPaintRect.x(), baselineY)); |
| } else |
| fillWithHorizontalExtensionGlyph(style, info, LayoutPoint(leftGlyphPaintRect.maxX(), baselineY), LayoutPoint(rightGlyphPaintRect.x(), baselineY)); |
| } |
| |
| void MathOperator::paint(const RenderStyle& style, PaintInfo& info, const LayoutPoint& paintOffset) |
| { |
| if (info.context().paintingDisabled() || info.phase != PaintPhase::Foreground || style.visibility() != Visibility::Visible) |
| return; |
| |
| // Make a copy of the PaintInfo because applyTransform will modify its rect. |
| PaintInfo paintInfo(info); |
| GraphicsContextStateSaver stateSaver(paintInfo.context()); |
| paintInfo.context().setFillColor(style.visitedDependentColorWithColorFilter(CSSPropertyColor)); |
| |
| // For a radical character, we may need some scale transform to stretch it vertically or mirror it. |
| if (m_baseCharacter == kRadicalOperator) { |
| float radicalHorizontalScale = style.isLeftToRightDirection() ? 1 : -1; |
| if (radicalHorizontalScale == -1 || m_radicalVerticalScale > 1) { |
| LayoutPoint scaleOrigin = paintOffset; |
| scaleOrigin.move(m_width / 2, 0_lu); |
| paintInfo.applyTransform(AffineTransform().translate(scaleOrigin).scale(radicalHorizontalScale, m_radicalVerticalScale).translate(-scaleOrigin)); |
| } |
| } |
| |
| if (m_stretchType == StretchType::GlyphAssembly) { |
| if (m_operatorType == Type::VerticalOperator) |
| paintVerticalGlyphAssembly(style, info, paintOffset); |
| else |
| paintHorizontalGlyphAssembly(style, info, paintOffset); |
| return; |
| } |
| |
| GlyphData glyphData; |
| ASSERT(m_stretchType == StretchType::Unstretched || m_stretchType == StretchType::SizeVariant); |
| if (!getBaseGlyph(style, glyphData)) |
| return; |
| if (m_stretchType == StretchType::SizeVariant) |
| glyphData.glyph = m_variantGlyph; |
| |
| GlyphBuffer buffer; |
| buffer.add(glyphData.glyph, glyphData.font, advanceWidthForGlyph(glyphData)); |
| LayoutPoint operatorTopLeft = paintOffset; |
| FloatRect glyphBounds = boundsForGlyph(glyphData); |
| LayoutPoint operatorOrigin { operatorTopLeft.x(), LayoutUnit(operatorTopLeft.y() - glyphBounds.y()) }; |
| paintInfo.context().drawGlyphs(*glyphData.font, buffer, 0, 1, operatorOrigin, style.fontCascade().fontDescription().fontSmoothing()); |
| } |
| |
| } |
| |
| #endif |
