| 2018-04-27 Yusuke Suzuki <utatane.tea@gmail.com> |
| |
| [JSC][ARM64][Linux] Add collectCPUFeatures using auxiliary vector |
| https://bugs.webkit.org/show_bug.cgi?id=185055 |
| |
| Reviewed by JF Bastien. |
| |
| This patch is paving the way to emitting jscvt instruction if possible. |
| To do that, we need to determine jscvt instruction is supported in the |
| given CPU. |
| |
| We add a function collectCPUFeatures, which is responsible to collect |
| CPU features if necessary. In Linux, we can use auxiliary vector to get |
| the information without parsing /proc/cpuinfo. |
| |
| Currently, nobody calls this function. It is later called when we emit |
| jscvt instruction. To make it possible, we also need to add disassembler |
| support too. |
| |
| * assembler/AbstractMacroAssembler.h: |
| * assembler/MacroAssemblerARM64.cpp: |
| (JSC::MacroAssemblerARM64::collectCPUFeatures): |
| * assembler/MacroAssemblerARM64.h: |
| * assembler/MacroAssemblerX86Common.h: |
| |
| 2018-04-26 Filip Pizlo <fpizlo@apple.com> |
| |
| Also run foldPathConstants before mussing up SSA |
| https://bugs.webkit.org/show_bug.cgi?id=185069 |
| |
| Reviewed by Saam Barati. |
| |
| This isn't needed now, but will be once I implement the phase in bug 185060. |
| |
| This could be a speed-up, or a slow-down, independent of that phase. Most likely it's neutral. |
| Local testing seems to suggest that it's neutral. Anyway, whatever it ends up being, I want it to |
| be landed separately and measured separately from that phase. |
| |
| It's probably nice for sanity to have this and reduceStrength run before tail duplication and |
| another round of reduceStrength, since that make for something that is closer to a fixpoint. But |
| it will increase FTL compile times. So, there's no way to guess if this change is good, bad, or |
| neutral. It all depends on what programs typically look like. |
| |
| * b3/B3Generate.cpp: |
| (JSC::B3::generateToAir): |
| |
| 2018-04-27 Ryan Haddad <ryanhaddad@apple.com> |
| |
| Unreviewed, rolling out r231086. |
| |
| Caused JSC test failures due to an unchecked exception. |
| |
| Reverted changeset: |
| |
| "[ESNext][BigInt] Implement support for "*" operation" |
| https://bugs.webkit.org/show_bug.cgi?id=183721 |
| https://trac.webkit.org/changeset/231086 |
| |
| 2018-04-26 Caio Lima <ticaiolima@gmail.com> |
| |
| [ESNext][BigInt] Implement support for "*" operation |
| https://bugs.webkit.org/show_bug.cgi?id=183721 |
| |
| Reviewed by Saam Barati. |
| |
| Added BigInt support into times binary operator into LLInt and on |
| JITOperations profiledMul and unprofiledMul. We are also replacing all |
| uses of int to unsigned when there is no negative values for |
| variables. |
| |
| * dfg/DFGConstantFoldingPhase.cpp: |
| (JSC::DFG::ConstantFoldingPhase::foldConstants): |
| * jit/JITOperations.cpp: |
| * runtime/CommonSlowPaths.cpp: |
| (JSC::SLOW_PATH_DECL): |
| * runtime/JSBigInt.cpp: |
| (JSC::JSBigInt::JSBigInt): |
| (JSC::JSBigInt::allocationSize): |
| (JSC::JSBigInt::createWithLength): |
| (JSC::JSBigInt::toString): |
| (JSC::JSBigInt::multiply): |
| (JSC::JSBigInt::digitDiv): |
| (JSC::JSBigInt::internalMultiplyAdd): |
| (JSC::JSBigInt::multiplyAccumulate): |
| (JSC::JSBigInt::equals): |
| (JSC::JSBigInt::absoluteDivSmall): |
| (JSC::JSBigInt::calculateMaximumCharactersRequired): |
| (JSC::JSBigInt::toStringGeneric): |
| (JSC::JSBigInt::rightTrim): |
| (JSC::JSBigInt::allocateFor): |
| (JSC::JSBigInt::parseInt): |
| (JSC::JSBigInt::digit): |
| (JSC::JSBigInt::setDigit): |
| * runtime/JSBigInt.h: |
| * runtime/Operations.h: |
| (JSC::jsMul): |
| |
| 2018-04-26 Mark Lam <mark.lam@apple.com> |
| |
| Gardening: Speculative build fix for Windows. |
| https://bugs.webkit.org/show_bug.cgi?id=184976 |
| <rdar://problem/39723901> |
| |
| Not reviewed. |
| |
| * runtime/JSCPtrTag.h: |
| |
| 2018-04-26 Mark Lam <mark.lam@apple.com> |
| |
| Gardening: Windows build fix. |
| |
| Not reviewed. |
| |
| * runtime/Options.cpp: |
| |
| 2018-04-26 Jer Noble <jer.noble@apple.com> |
| |
| WK_COCOA_TOUCH all the things. |
| https://bugs.webkit.org/show_bug.cgi?id=185006 |
| <rdar://problem/39736025> |
| |
| Reviewed by Tim Horton. |
| |
| * Configurations/Base.xcconfig: |
| |
| 2018-04-26 Per Arne Vollan <pvollan@apple.com> |
| |
| Disable content filtering in minimal simulator mode |
| https://bugs.webkit.org/show_bug.cgi?id=185027 |
| <rdar://problem/39736091> |
| |
| Reviewed by Jer Noble. |
| |
| * Configurations/FeatureDefines.xcconfig: |
| |
| 2018-04-26 Andy VanWagoner <thetalecrafter@gmail.com> |
| |
| [INTL] Implement Intl.PluralRules |
| https://bugs.webkit.org/show_bug.cgi?id=184312 |
| |
| Reviewed by JF Bastien. |
| |
| Use UNumberFormat to enforce formatting, and then UPluralRules to find |
| the correct plural rule for the given number. Relies on ICU v59+ for |
| resolvedOptions().pluralCategories and trailing 0 detection. |
| Behind the useIntlPluralRules option and INTL_PLURAL_RULES flag. |
| |
| * CMakeLists.txt: |
| * Configurations/FeatureDefines.xcconfig: |
| * DerivedSources.make: |
| * JavaScriptCore.xcodeproj/project.pbxproj: |
| * Sources.txt: |
| * builtins/BuiltinNames.h: |
| * runtime/BigIntObject.cpp: |
| (JSC::BigIntObject::create): Moved to ensure complete JSGlobalObject definition. |
| * runtime/BigIntObject.h: |
| * runtime/CommonIdentifiers.h: |
| * runtime/IntlObject.cpp: |
| (JSC::IntlObject::finishCreation): |
| * runtime/IntlObject.h: |
| * runtime/IntlPluralRules.cpp: Added. |
| (JSC::IntlPluralRules::UPluralRulesDeleter::operator() const): |
| (JSC::IntlPluralRules::UNumberFormatDeleter::operator() const): |
| (JSC::UEnumerationDeleter::operator() const): |
| (JSC::IntlPluralRules::create): |
| (JSC::IntlPluralRules::createStructure): |
| (JSC::IntlPluralRules::IntlPluralRules): |
| (JSC::IntlPluralRules::finishCreation): |
| (JSC::IntlPluralRules::destroy): |
| (JSC::IntlPluralRules::visitChildren): |
| (JSC::IntlPRInternal::localeData): |
| (JSC::IntlPluralRules::initializePluralRules): |
| (JSC::IntlPluralRules::resolvedOptions): |
| (JSC::IntlPluralRules::select): |
| * runtime/IntlPluralRules.h: Added. |
| * runtime/IntlPluralRulesConstructor.cpp: Added. |
| (JSC::IntlPluralRulesConstructor::create): |
| (JSC::IntlPluralRulesConstructor::createStructure): |
| (JSC::IntlPluralRulesConstructor::IntlPluralRulesConstructor): |
| (JSC::IntlPluralRulesConstructor::finishCreation): |
| (JSC::constructIntlPluralRules): |
| (JSC::callIntlPluralRules): |
| (JSC::IntlPluralRulesConstructorFuncSupportedLocalesOf): |
| (JSC::IntlPluralRulesConstructor::visitChildren): |
| * runtime/IntlPluralRulesConstructor.h: Added. |
| * runtime/IntlPluralRulesPrototype.cpp: Added. |
| (JSC::IntlPluralRulesPrototype::create): |
| (JSC::IntlPluralRulesPrototype::createStructure): |
| (JSC::IntlPluralRulesPrototype::IntlPluralRulesPrototype): |
| (JSC::IntlPluralRulesPrototype::finishCreation): |
| (JSC::IntlPluralRulesPrototypeFuncSelect): |
| (JSC::IntlPluralRulesPrototypeFuncResolvedOptions): |
| * runtime/IntlPluralRulesPrototype.h: Added. |
| * runtime/JSGlobalObject.cpp: |
| (JSC::JSGlobalObject::init): |
| (JSC::JSGlobalObject::intlPluralRulesAvailableLocales): |
| * runtime/JSGlobalObject.h: |
| * runtime/Options.h: |
| * runtime/RegExpPrototype.cpp: Added inlines header. |
| * runtime/VM.cpp: |
| (JSC::VM::VM): |
| * runtime/VM.h: |
| |
| 2018-04-26 Dominik Infuehr <dinfuehr@igalia.com> |
| |
| [MIPS] Fix branch offsets in branchNeg32 |
| https://bugs.webkit.org/show_bug.cgi?id=185025 |
| |
| Reviewed by Yusuke Suzuki. |
| |
| Two nops were removed in branch(Not)Equal in #183130 but the offset wasn't adjusted. |
| |
| * assembler/MacroAssemblerMIPS.h: |
| (JSC::MacroAssemblerMIPS::branchNeg32): |
| |
| 2018-04-25 Robin Morisset <rmorisset@apple.com> |
| |
| In FTLLowerDFGToB3.cpp::compileCreateRest, always use a contiguous array as the indexing type when under isWatchingHavingABadTimeWatchpoint |
| https://bugs.webkit.org/show_bug.cgi?id=184773 |
| <rdar://problem/37773612> |
| |
| Reviewed by Filip Pizlo. |
| |
| We were calling restParameterStructure(), which returns arrayStructureForIndexingTypeDuringAllocation(ArrayWithContiguous). |
| arrayStructureForIndexingTypeDuringAllocation uses m_arrayStructureForIndexingShapeDuringAllocation, which is set to SlowPutArrayStorage when we are 'having a bad time'. |
| This is problematic, because the structure is then passed to allocateUninitializedContiguousJSArray, which ASSERTs that the indexing type is contiguous (or int32). |
| We solve the problem by using originalArrayStructureForIndexingType which always returns a structure with the right indexing type (contiguous), even if we are having a bad time. |
| This is safe, as we are under isWatchingHavingABadTimeWatchpoint, so if we have a bad time, the code we generate will never be installed. |
| |
| * ftl/FTLLowerDFGToB3.cpp: |
| (JSC::FTL::DFG::LowerDFGToB3::compileCreateRest): |
| |
| 2018-04-25 Mark Lam <mark.lam@apple.com> |
| |
| Push the definition of PtrTag down to the WTF layer. |
| https://bugs.webkit.org/show_bug.cgi?id=184976 |
| <rdar://problem/39723901> |
| |
| Reviewed by Saam Barati. |
| |
| * CMakeLists.txt: |
| * JavaScriptCore.xcodeproj/project.pbxproj: |
| * assembler/ARM64Assembler.h: |
| * assembler/AbstractMacroAssembler.h: |
| * assembler/MacroAssemblerCodeRef.cpp: |
| * assembler/MacroAssemblerCodeRef.h: |
| * b3/B3MathExtras.cpp: |
| * bytecode/LLIntCallLinkInfo.h: |
| * disassembler/Disassembler.h: |
| * ftl/FTLJITCode.cpp: |
| * interpreter/InterpreterInlines.h: |
| * jit/ExecutableAllocator.h: |
| * jit/JITOperations.cpp: |
| * jit/ThunkGenerator.h: |
| * jit/ThunkGenerators.h: |
| * llint/LLIntOffsetsExtractor.cpp: |
| * llint/LLIntPCRanges.h: |
| * runtime/JSCPtrTag.h: Added. |
| * runtime/NativeFunction.h: |
| * runtime/PtrTag.h: Removed. |
| * runtime/VMTraps.cpp: |
| |
| 2018-04-25 Keith Miller <keith_miller@apple.com> |
| |
| getUnlinkedGlobalFunctionExecutable should only save things to the code cache if the option is set |
| https://bugs.webkit.org/show_bug.cgi?id=184998 |
| |
| Reviewed by Saam Barati. |
| |
| * runtime/CodeCache.cpp: |
| (JSC::CodeCache::getUnlinkedGlobalFunctionExecutable): |
| |
| 2018-04-25 Keith Miller <keith_miller@apple.com> |
| |
| Add missing scope release to functionProtoFuncToString |
| https://bugs.webkit.org/show_bug.cgi?id=184995 |
| |
| Reviewed by Saam Barati. |
| |
| * runtime/FunctionPrototype.cpp: |
| (JSC::functionProtoFuncToString): |
| |
| 2018-04-25 Yusuke Suzuki <utatane.tea@gmail.com> |
| |
| REGRESSION(r230748) [GTK][ARM] no matching function for call to 'JSC::CCallHelpers::swap(JSC::ARMRegisters::FPRegisterID&, JSC::ARMRegisters::FPRegisterID&)' |
| https://bugs.webkit.org/show_bug.cgi?id=184730 |
| |
| Reviewed by Mark Lam. |
| |
| Add swap(FPRegisterID, FPRegisterID) implementation using ARMRegisters::SD0 (temporary register in MacroAssemblerARM). |
| And we now use dataTempRegister, addressTempRegister, and fpTempRegister instead of using S0, S1, and SD0. |
| |
| We also change swap(RegisterID, RegisterID) implementation to use moves and temporaries simply. This is aligned to |
| ARMv7 implementation. |
| |
| * assembler/ARMAssembler.h: |
| * assembler/MacroAssemblerARM.h: |
| (JSC::MacroAssemblerARM::add32): |
| (JSC::MacroAssemblerARM::and32): |
| (JSC::MacroAssemblerARM::lshift32): |
| (JSC::MacroAssemblerARM::mul32): |
| (JSC::MacroAssemblerARM::or32): |
| (JSC::MacroAssemblerARM::rshift32): |
| (JSC::MacroAssemblerARM::urshift32): |
| (JSC::MacroAssemblerARM::sub32): |
| (JSC::MacroAssemblerARM::xor32): |
| (JSC::MacroAssemblerARM::load8): |
| (JSC::MacroAssemblerARM::abortWithReason): |
| (JSC::MacroAssemblerARM::load32WithAddressOffsetPatch): |
| (JSC::MacroAssemblerARM::store32WithAddressOffsetPatch): |
| (JSC::MacroAssemblerARM::store8): |
| (JSC::MacroAssemblerARM::store32): |
| (JSC::MacroAssemblerARM::push): |
| (JSC::MacroAssemblerARM::swap): |
| (JSC::MacroAssemblerARM::branch8): |
| (JSC::MacroAssemblerARM::branchPtr): |
| (JSC::MacroAssemblerARM::branch32): |
| (JSC::MacroAssemblerARM::branch32WithUnalignedHalfWords): |
| (JSC::MacroAssemblerARM::branchTest8): |
| (JSC::MacroAssemblerARM::branchTest32): |
| (JSC::MacroAssemblerARM::jump): |
| (JSC::MacroAssemblerARM::branchAdd32): |
| (JSC::MacroAssemblerARM::mull32): |
| (JSC::MacroAssemblerARM::branchMul32): |
| (JSC::MacroAssemblerARM::patchableBranch32): |
| (JSC::MacroAssemblerARM::nearCall): |
| (JSC::MacroAssemblerARM::compare32): |
| (JSC::MacroAssemblerARM::compare8): |
| (JSC::MacroAssemblerARM::test32): |
| (JSC::MacroAssemblerARM::test8): |
| (JSC::MacroAssemblerARM::add64): |
| (JSC::MacroAssemblerARM::load32): |
| (JSC::MacroAssemblerARM::call): |
| (JSC::MacroAssemblerARM::branchPtrWithPatch): |
| (JSC::MacroAssemblerARM::branch32WithPatch): |
| (JSC::MacroAssemblerARM::storePtrWithPatch): |
| (JSC::MacroAssemblerARM::loadDouble): |
| (JSC::MacroAssemblerARM::storeDouble): |
| (JSC::MacroAssemblerARM::addDouble): |
| (JSC::MacroAssemblerARM::divDouble): |
| (JSC::MacroAssemblerARM::subDouble): |
| (JSC::MacroAssemblerARM::mulDouble): |
| (JSC::MacroAssemblerARM::convertInt32ToDouble): |
| (JSC::MacroAssemblerARM::branchDouble): |
| (JSC::MacroAssemblerARM::branchTruncateDoubleToInt32): |
| (JSC::MacroAssemblerARM::truncateDoubleToInt32): |
| (JSC::MacroAssemblerARM::truncateDoubleToUint32): |
| (JSC::MacroAssemblerARM::branchConvertDoubleToInt32): |
| (JSC::MacroAssemblerARM::branchDoubleNonZero): |
| (JSC::MacroAssemblerARM::branchDoubleZeroOrNaN): |
| (JSC::MacroAssemblerARM::call32): |
| (JSC::MacroAssemblerARM::internalCompare32): |
| |
| 2018-04-25 Ross Kirsling <ross.kirsling@sony.com> |
| |
| [WinCairo] Fix js/regexp-unicode.html crash. |
| https://bugs.webkit.org/show_bug.cgi?id=184891 |
| |
| Reviewed by Yusuke Suzuki. |
| |
| On Win64, register RDI is "considered nonvolatile and must be saved and restored by a function that uses [it]". |
| RDI is being used as a scratch register for JIT_UNICODE_EXPRESSIONS, not just YARR_JIT_ALL_PARENS_EXPRESSIONS. |
| |
| * yarr/YarrJIT.cpp: |
| (JSC::Yarr::YarrGenerator::generateEnter): |
| (JSC::Yarr::YarrGenerator::generateReturn): |
| Unconditionally save and restore RDI on 64-bit Windows. |
| |
| 2018-04-25 Michael Catanzaro <mcatanzaro@igalia.com> |
| |
| [GTK] Miscellaneous build cleanups |
| https://bugs.webkit.org/show_bug.cgi?id=184399 |
| |
| Reviewed by Žan Doberšek. |
| |
| * PlatformGTK.cmake: |
| |
| 2018-04-24 Keith Miller <keith_miller@apple.com> |
| |
| fromCharCode is missing some exception checks |
| https://bugs.webkit.org/show_bug.cgi?id=184952 |
| |
| Reviewed by Saam Barati. |
| |
| I also removed the pointless slow path function and moved it into the |
| main function. |
| |
| * runtime/StringConstructor.cpp: |
| (JSC::stringFromCharCode): |
| (JSC::stringFromCharCodeSlowCase): Deleted. |
| |
| 2018-04-24 Filip Pizlo <fpizlo@apple.com> |
| |
| MultiByOffset should emit one fewer branches in the case that the set of structures is proved already |
| https://bugs.webkit.org/show_bug.cgi?id=184923 |
| |
| Reviewed by Saam Barati. |
| |
| If we have a MultiGetByOffset or MultiPutByOffset over a structure set that we've already proved |
| (i.e. we know that the object has one of those structures), then previously we would still emit a |
| switch with a case per structure along with a default case. That would mean one extra redundant |
| branch to check that whatever structure we wound up with belongs to the set. In that case, we |
| were already making the default case be an Oops. |
| |
| One possible solution would be to say that the default case being Oops means that B3 doesn't need |
| to emit the extra branch. But that would require having B3 exploit the fact that Oops is known to |
| be unreachable. Although B3 IR semantics (webkit.org/docs/b3/intermediate-representation.html) |
| seem to allow this, I don't particularly like that style of optimization. I like Oops to mean |
| trap. |
| |
| So, this patch makes FTL lowering turn one of the cases into the default, explicitly removing the |
| extra branch. |
| |
| This is not a speed-up. But it makes the B3 IR for MultiByOffset a lot simpler, which should make |
| it easier to implement B3-level optimizations for MultiByOffset. It also makes the IR easier to |
| read. |
| |
| * ftl/FTLLowerDFGToB3.cpp: |
| (JSC::FTL::DFG::LowerDFGToB3::compileMultiGetByOffset): |
| (JSC::FTL::DFG::LowerDFGToB3::compileMultiPutByOffset): |
| (JSC::FTL::DFG::LowerDFGToB3::emitSwitchForMultiByOffset): |
| |
| 2018-04-24 Filip Pizlo <fpizlo@apple.com> |
| |
| DFG CSE should know how to decay a MultiGetByOffset |
| https://bugs.webkit.org/show_bug.cgi?id=159859 |
| |
| Reviewed by Keith Miller. |
| |
| This teaches Node::remove() how to decay a MultiGetByOffset to a CheckStructure, so that |
| clobberize() can report a def() for MultiGetByOffset. |
| |
| This is a slight improvement to codegen in splay because splay is a heavy user of |
| MultiGetByOffset. It uses it redundantly in one of its hot functions (the function called |
| "splay_"). I don't see a net speed-up in the benchmark. However, this is just a first step to |
| removing MultiXByOffset-related redundancies, which by my estimates account for 16% of |
| splay's time. |
| |
| * dfg/DFGClobberize.h: |
| (JSC::DFG::clobberize): |
| * dfg/DFGNode.cpp: |
| (JSC::DFG::Node::remove): |
| (JSC::DFG::Node::removeWithoutChecks): |
| (JSC::DFG::Node::replaceWith): |
| (JSC::DFG::Node::replaceWithWithoutChecks): |
| * dfg/DFGNode.h: |
| (JSC::DFG::Node::convertToMultiGetByOffset): |
| (JSC::DFG::Node::replaceWith): Deleted. |
| * dfg/DFGNodeType.h: |
| * dfg/DFGObjectAllocationSinkingPhase.cpp: |
| |
| 2018-04-24 Keith Miller <keith_miller@apple.com> |
| |
| Update API docs with information on which run loop the VM will use |
| https://bugs.webkit.org/show_bug.cgi?id=184900 |
| <rdar://problem/39166054> |
| |
| Reviewed by Mark Lam. |
| |
| * API/JSContextRef.h: |
| * API/JSVirtualMachine.h: |
| |
| 2018-04-24 Filip Pizlo <fpizlo@apple.com> |
| |
| $vm.totalGCTime() should be a thing |
| https://bugs.webkit.org/show_bug.cgi?id=184916 |
| |
| Reviewed by Sam Weinig. |
| |
| When debugging regressions in tests that are GC heavy, it's nice to be able to query the total |
| time spent in GC to determine if the regression is because the GC got slower. |
| |
| This adds $vm.totalGCTime(), which tells you the total time spent in GC, in seconds. |
| |
| * heap/Heap.cpp: |
| (JSC::Heap::runEndPhase): |
| * heap/Heap.h: |
| (JSC::Heap::totalGCTime const): |
| * tools/JSDollarVM.cpp: |
| (JSC::functionTotalGCTime): |
| (JSC::JSDollarVM::finishCreation): |
| |
| 2018-04-23 Zalan Bujtas <zalan@apple.com> |
| |
| [LayoutFormattingContext] Initial commit. |
| https://bugs.webkit.org/show_bug.cgi?id=184896 |
| |
| Reviewed by Antti Koivisto. |
| |
| * Configurations/FeatureDefines.xcconfig: |
| |
| 2018-04-23 Filip Pizlo <fpizlo@apple.com> |
| |
| Unreviewed, revert accidental change to verbose flag. |
| |
| * dfg/DFGByteCodeParser.cpp: |
| |
| 2018-04-23 Filip Pizlo <fpizlo@apple.com> |
| |
| Roll out r226655 because it broke OSR entry when the pre-header is inadequately profiled. |
| |
| Rubber stamped by Saam Barati. |
| |
| This is a >2x speed-up in SunSpider/bitops-bitwise-and. We don't really care about SunSpider |
| anymore, but r226655 didn't result in any benchmark wins and just regressed this test by a lot. |
| Seems sensible to just roll it out. |
| |
| * dfg/DFGByteCodeParser.cpp: |
| (JSC::DFG::ByteCodeParser::addToGraph): |
| (JSC::DFG::ByteCodeParser::parse): |
| |
| 2018-04-22 Yusuke Suzuki <utatane.tea@gmail.com> |
| |
| [JSC] Remove ModuleLoaderPrototype |
| https://bugs.webkit.org/show_bug.cgi?id=184784 |
| |
| Reviewed by Mark Lam. |
| |
| When we introduce ModuleLoaderPrototype, ModuleLoader may be created by users and exposed to users. |
| However, the loader spec is abandoned. So we do not need to have ModuleLoaderPrototype and JSModuleLoader. |
| This patch merges ModuleLoaderPrototype's functionality into JSModuleLoader. |
| |
| * CMakeLists.txt: |
| * DerivedSources.make: |
| * JavaScriptCore.xcodeproj/project.pbxproj: |
| * Sources.txt: |
| * builtins/ModuleLoader.js: Renamed from Source/JavaScriptCore/builtins/ModuleLoaderPrototype.js. |
| * runtime/JSGlobalObject.cpp: |
| (JSC::JSGlobalObject::init): |
| (JSC::JSGlobalObject::visitChildren): |
| * runtime/JSGlobalObject.h: |
| (JSC::JSGlobalObject::proxyRevokeStructure const): |
| (JSC::JSGlobalObject::moduleLoaderStructure const): Deleted. |
| * runtime/JSModuleLoader.cpp: |
| (JSC::moduleLoaderParseModule): |
| (JSC::moduleLoaderRequestedModules): |
| (JSC::moduleLoaderModuleDeclarationInstantiation): |
| (JSC::moduleLoaderResolve): |
| (JSC::moduleLoaderResolveSync): |
| (JSC::moduleLoaderFetch): |
| (JSC::moduleLoaderGetModuleNamespaceObject): |
| (JSC::moduleLoaderEvaluate): |
| * runtime/JSModuleLoader.h: |
| * runtime/ModuleLoaderPrototype.cpp: Removed. |
| * runtime/ModuleLoaderPrototype.h: Removed. |
| |
| 2018-04-20 Carlos Garcia Campos <cgarcia@igalia.com> |
| |
| [GLIB] All API tests fail in debug builds |
| https://bugs.webkit.org/show_bug.cgi?id=184813 |
| |
| Reviewed by Mark Lam. |
| |
| This is because of a conflict of ExceptionHandler class used in tests and ExceptionHandler struct defined in |
| JSCContext.cpp. This patch renames the ExceptionHandler struct as JSCContextExceptionHandler. |
| |
| * API/glib/JSCContext.cpp: |
| (JSCContextExceptionHandler::JSCContextExceptionHandler): |
| (JSCContextExceptionHandler::~JSCContextExceptionHandler): |
| (jscContextConstructed): |
| (ExceptionHandler::ExceptionHandler): Deleted. |
| (ExceptionHandler::~ExceptionHandler): Deleted. |
| |
| 2018-04-20 Tim Horton <timothy_horton@apple.com> |
| |
| Adjust geolocation feature flag |
| https://bugs.webkit.org/show_bug.cgi?id=184856 |
| |
| Reviewed by Wenson Hsieh. |
| |
| * Configurations/FeatureDefines.xcconfig: |
| |
| 2018-04-20 Brian Burg <bburg@apple.com> |
| |
| Web Inspector: remove some dead code in IdentifiersFactory |
| https://bugs.webkit.org/show_bug.cgi?id=184839 |
| |
| Reviewed by Timothy Hatcher. |
| |
| This was never used on non-Chrome ports, so the identifier always has a |
| prefix of '0.'. We may change this in the future, but for now remove this. |
| Using a PID for this purpose is problematic anyway. |
| |
| * inspector/IdentifiersFactory.cpp: |
| (Inspector::addPrefixToIdentifier): |
| (Inspector::IdentifiersFactory::createIdentifier): |
| (Inspector::IdentifiersFactory::requestId): |
| (Inspector::IdentifiersFactory::addProcessIdPrefixTo): Deleted. |
| * inspector/IdentifiersFactory.h: |
| |
| 2018-04-20 Mark Lam <mark.lam@apple.com> |
| |
| Add the ability to use a hash for setting PtrTag enum values. |
| https://bugs.webkit.org/show_bug.cgi?id=184852 |
| <rdar://problem/39613891> |
| |
| Reviewed by Saam Barati. |
| |
| * runtime/PtrTag.h: |
| |
| 2018-04-20 Mark Lam <mark.lam@apple.com> |
| |
| Some JSEntryPtrTags should actually be JSInternalPtrTags. |
| https://bugs.webkit.org/show_bug.cgi?id=184712 |
| <rdar://problem/39507381> |
| |
| Reviewed by Michael Saboff. |
| |
| 1. Convert some uses of JSEntryPtrTag into JSInternalPtrTags. |
| 2. Tag all LLInt bytecodes consistently with BytecodePtrTag now and retag them |
| only when needed. |
| |
| * bytecode/AccessCase.cpp: |
| (JSC::AccessCase::generateImpl): |
| * bytecode/ByValInfo.h: |
| (JSC::ByValInfo::ByValInfo): |
| * bytecode/CallLinkInfo.cpp: |
| (JSC::CallLinkInfo::callReturnLocation): |
| (JSC::CallLinkInfo::patchableJump): |
| (JSC::CallLinkInfo::hotPathBegin): |
| (JSC::CallLinkInfo::slowPathStart): |
| * bytecode/CallLinkInfo.h: |
| (JSC::CallLinkInfo::setCallLocations): |
| (JSC::CallLinkInfo::hotPathOther): |
| * bytecode/PolymorphicAccess.cpp: |
| (JSC::PolymorphicAccess::regenerate): |
| * bytecode/StructureStubInfo.h: |
| (JSC::StructureStubInfo::doneLocation): |
| * dfg/DFGJITCompiler.cpp: |
| (JSC::DFG::JITCompiler::link): |
| * dfg/DFGOSRExit.cpp: |
| (JSC::DFG::reifyInlinedCallFrames): |
| * ftl/FTLLazySlowPath.cpp: |
| (JSC::FTL::LazySlowPath::initialize): |
| * ftl/FTLLazySlowPath.h: |
| (JSC::FTL::LazySlowPath::done const): |
| * ftl/FTLLowerDFGToB3.cpp: |
| (JSC::FTL::DFG::LowerDFGToB3::compileCallOrConstruct): |
| (JSC::FTL::DFG::LowerDFGToB3::compileDirectCallOrConstruct): |
| (JSC::FTL::DFG::LowerDFGToB3::compileTailCall): |
| (JSC::FTL::DFG::LowerDFGToB3::compileCallOrConstructVarargsSpread): |
| (JSC::FTL::DFG::LowerDFGToB3::compileCallOrConstructVarargs): |
| (JSC::FTL::DFG::LowerDFGToB3::compileIn): |
| (JSC::FTL::DFG::LowerDFGToB3::lazySlowPath): |
| * jit/JIT.cpp: |
| (JSC::JIT::link): |
| * jit/JITExceptions.cpp: |
| (JSC::genericUnwind): |
| * jit/JITMathIC.h: |
| (JSC::isProfileEmpty): |
| * llint/LLIntData.cpp: |
| (JSC::LLInt::initialize): |
| * llint/LLIntData.h: |
| (JSC::LLInt::getCodePtr): |
| (JSC::LLInt::getExecutableAddress): Deleted. |
| * llint/LLIntExceptions.cpp: |
| (JSC::LLInt::callToThrow): |
| * llint/LLIntSlowPaths.cpp: |
| (JSC::LLInt::LLINT_SLOW_PATH_DECL): |
| * wasm/js/WasmToJS.cpp: |
| (JSC::Wasm::wasmToJS): |
| |
| 2018-04-18 Jer Noble <jer.noble@apple.com> |
| |
| Don't put build products into WK_ALTERNATE_WEBKIT_SDK_PATH for engineering builds |
| https://bugs.webkit.org/show_bug.cgi?id=184762 |
| |
| Reviewed by Dan Bernstein. |
| |
| * Configurations/Base.xcconfig: |
| * JavaScriptCore.xcodeproj/project.pbxproj: |
| |
| 2018-04-20 Daniel Bates <dabates@apple.com> |
| |
| Remove code for compilers that did not support NSDMI for aggregates |
| https://bugs.webkit.org/show_bug.cgi?id=184599 |
| |
| Reviewed by Per Arne Vollan. |
| |
| Remove workaround for earlier Visual Studio versions that did not support non-static data |
| member initializers (NSDMI) for aggregates. We have since updated all the build.webkit.org |
| and EWS bots to a newer version that supports this feature. |
| |
| * domjit/DOMJITEffect.h: |
| (JSC::DOMJIT::Effect::Effect): Deleted. |
| * runtime/HasOwnPropertyCache.h: |
| (JSC::HasOwnPropertyCache::Entry::Entry): Deleted. |
| * wasm/WasmFormat.h: |
| (JSC::Wasm::WasmToWasmImportableFunction::WasmToWasmImportableFunction): Deleted. |
| |
| 2018-04-20 Mark Lam <mark.lam@apple.com> |
| |
| Build fix for internal builds after r230826. |
| https://bugs.webkit.org/show_bug.cgi?id=184790 |
| <rdar://problem/39301369> |
| |
| Not reviewed. |
| |
| * runtime/Options.cpp: |
| (JSC::overrideDefaults): |
| * tools/SigillCrashAnalyzer.cpp: |
| (JSC::SignalContext::dump): |
| |
| 2018-04-19 Tadeu Zagallo <tzagallo@apple.com> |
| |
| REGRESSION(r227340): ArrayBuffers were not being serialized when sent via MessagePorts |
| https://bugs.webkit.org/show_bug.cgi?id=184254 |
| <rdar://problem/39140200> |
| |
| Reviewed by Daniel Bates. |
| |
| Expose an extra constructor of ArrayBufferContents in order to be able to decode SerializedScriptValues. |
| |
| * runtime/ArrayBuffer.h: |
| (JSC::ArrayBufferContents::ArrayBufferContents): |
| |
| 2018-04-19 Mark Lam <mark.lam@apple.com> |
| |
| Apply pointer profiling to Signal pointers. |
| https://bugs.webkit.org/show_bug.cgi?id=184790 |
| <rdar://problem/39301369> |
| |
| Reviewed by Michael Saboff. |
| |
| 1. Change stackPointer, framePointer, and instructionPointer accessors to |
| be a pair of getter/setter functions. |
| 2. Add support for USE(PLATFORM_REGISTERS_WITH_PROFILE) to allow use of a |
| a pointer profiling variants of these accessors. |
| 3. Also add a linkRegister accessor only for ARM64 on OS(DARWIN). |
| |
| * JavaScriptCorePrefix.h: |
| * runtime/MachineContext.h: |
| (JSC::MachineContext::stackPointerImpl): |
| (JSC::MachineContext::stackPointer): |
| (JSC::MachineContext::setStackPointer): |
| (JSC::MachineContext::framePointerImpl): |
| (JSC::MachineContext::framePointer): |
| (JSC::MachineContext::setFramePointer): |
| (JSC::MachineContext::instructionPointerImpl): |
| (JSC::MachineContext::instructionPointer): |
| (JSC::MachineContext::setInstructionPointer): |
| (JSC::MachineContext::linkRegisterImpl): |
| (JSC::MachineContext::linkRegister): |
| (JSC::MachineContext::setLinkRegister): |
| * runtime/SamplingProfiler.cpp: |
| (JSC::SamplingProfiler::takeSample): |
| * runtime/VMTraps.cpp: |
| (JSC::SignalContext::SignalContext): |
| (JSC::VMTraps::tryInstallTrapBreakpoints): |
| * tools/CodeProfiling.cpp: |
| (JSC::profilingTimer): |
| * tools/SigillCrashAnalyzer.cpp: |
| (JSC::SignalContext::dump): |
| (JSC::installCrashHandler): |
| (JSC::SigillCrashAnalyzer::analyze): |
| * wasm/WasmFaultSignalHandler.cpp: |
| (JSC::Wasm::trapHandler): |
| |
| 2018-04-19 David Kilzer <ddkilzer@apple.com> |
| |
| Enable Objective-C weak references |
| <https://webkit.org/b/184789> |
| <rdar://problem/39571716> |
| |
| Reviewed by Dan Bernstein. |
| |
| * Configurations/Base.xcconfig: |
| (CLANG_ENABLE_OBJC_WEAK): Enable. |
| * Configurations/ToolExecutable.xcconfig: |
| (CLANG_ENABLE_OBJC_ARC): Simplify. |
| |
| 2018-04-17 Filip Pizlo <fpizlo@apple.com> |
| |
| The InternalFunction hierarchy should be in IsoSubspaces |
| https://bugs.webkit.org/show_bug.cgi?id=184721 |
| |
| Reviewed by Saam Barati. |
| |
| This moves InternalFunction into a IsoSubspace. It also moves all subclasses into IsoSubspaces, |
| but subclasses that are the same size as InternalFunction share its subspace. I did this |
| because the subclasses appear to just override methods, which are called dynamically via the |
| structure or class of the object. So, I don't see a type confusion risk if UAF is used to |
| allocate one kind of InternalFunction over another. |
| |
| * API/JSBase.h: |
| * API/JSCallbackFunction.h: |
| * API/ObjCCallbackFunction.h: |
| (JSC::ObjCCallbackFunction::subspaceFor): |
| * CMakeLists.txt: |
| * JavaScriptCore.xcodeproj/project.pbxproj: |
| * Sources.txt: |
| * heap/IsoSubspacePerVM.cpp: Added. |
| (JSC::IsoSubspacePerVM::AutoremovingIsoSubspace::AutoremovingIsoSubspace): |
| (JSC::IsoSubspacePerVM::AutoremovingIsoSubspace::~AutoremovingIsoSubspace): |
| (JSC::IsoSubspacePerVM::IsoSubspacePerVM): |
| (JSC::IsoSubspacePerVM::~IsoSubspacePerVM): |
| (JSC::IsoSubspacePerVM::forVM): |
| * heap/IsoSubspacePerVM.h: Added. |
| (JSC::IsoSubspacePerVM::SubspaceParameters::SubspaceParameters): |
| * runtime/Error.h: |
| * runtime/ErrorConstructor.h: |
| * runtime/InternalFunction.h: |
| (JSC::InternalFunction::subspaceFor): |
| * runtime/IntlCollatorConstructor.h: |
| * runtime/IntlDateTimeFormatConstructor.h: |
| * runtime/IntlNumberFormatConstructor.h: |
| * runtime/JSArrayBufferConstructor.h: |
| * runtime/NativeErrorConstructor.h: |
| * runtime/ProxyRevoke.h: |
| * runtime/RegExpConstructor.h: |
| * runtime/VM.cpp: |
| (JSC::VM::VM): |
| * runtime/VM.h: |
| |
| 2018-04-19 Yusuke Suzuki <utatane.tea@gmail.com> |
| |
| Unreviewed, Fix jsc shell |
| https://bugs.webkit.org/show_bug.cgi?id=184600 |
| |
| WebAssembly module loading does not finish with drainMicrotasks(). |
| So JSNativeStdFunction's capturing variables become invalid. |
| This patch fixes this issue. |
| |
| * jsc.cpp: |
| (functionDollarAgentStart): |
| (runWithOptions): |
| (runJSC): |
| (jscmain): |
| |
| 2018-04-18 Ross Kirsling <ross.kirsling@sony.com> |
| |
| REGRESSION(r230748) [WinCairo] 'JSC::JIT::appendCallWithSlowPathReturnType': function does not take 1 arguments |
| https://bugs.webkit.org/show_bug.cgi?id=184725 |
| |
| Reviewed by Mark Lam. |
| |
| * jit/JIT.h: |
| |
| 2018-04-18 Yusuke Suzuki <utatane.tea@gmail.com> |
| |
| [WebAssembly][Modules] Import tables in wasm modules |
| https://bugs.webkit.org/show_bug.cgi?id=184738 |
| |
| Reviewed by JF Bastien. |
| |
| This patch simply allows wasm modules to import table from wasm modules / js re-exporting. |
| Basically moving JSWebAssemblyInstance's table linking code to WebAssemblyModuleRecord::link |
| just works. |
| |
| * wasm/js/JSWebAssemblyInstance.cpp: |
| (JSC::JSWebAssemblyInstance::create): |
| * wasm/js/WebAssemblyModuleRecord.cpp: |
| (JSC::WebAssemblyModuleRecord::link): |
| |
| 2018-04-18 Dominik Infuehr <dinfuehr@igalia.com> |
| |
| [ARM] Fix build error and crash after PtrTag change |
| https://bugs.webkit.org/show_bug.cgi?id=184732 |
| |
| Reviewed by Mark Lam. |
| |
| Do not pass NoPtrTag in callOperation and fix misspelled JSEntryPtrTag. Use |
| MacroAssemblerCodePtr::createFromExecutableAddress to avoid tagging a pointer |
| twice with ARM-Thumb2. |
| |
| * assembler/MacroAssemblerCodeRef.h: |
| (JSC::MacroAssemblerCodeRef::MacroAssemblerCodeRef): |
| * jit/JITPropertyAccess32_64.cpp: |
| (JSC::JIT::emitSlow_op_put_by_val): |
| * jit/Repatch.cpp: |
| (JSC::linkPolymorphicCall): |
| |
| 2018-04-18 Yusuke Suzuki <utatane.tea@gmail.com> |
| |
| [WebAssembly][Modules] Import globals from wasm modules |
| https://bugs.webkit.org/show_bug.cgi?id=184736 |
| |
| Reviewed by JF Bastien. |
| |
| This patch implements a feature importing globals to/from wasm modules. |
| Since we are not supporting mutable globals now, we can just copy the |
| global data when importing. Currently we do not support importing/exporting |
| i64 globals. This will be supported once (1) mutable global bindings are |
| specified and (2) BigInt based i64 importing/exporting is specified. |
| |
| * wasm/js/JSWebAssemblyInstance.cpp: |
| (JSC::JSWebAssemblyInstance::create): |
| * wasm/js/WebAssemblyModuleRecord.cpp: |
| (JSC::WebAssemblyModuleRecord::link): |
| |
| 2018-04-18 Tomas Popela <tpopela@redhat.com> |
| |
| Unreviewed, fix build on ARM |
| |
| * assembler/MacroAssemblerARM.h: |
| (JSC::MacroAssemblerARM::readCallTarget): |
| |
| 2018-04-18 Tomas Popela <tpopela@redhat.com> |
| |
| Unreviewed, fix build with GCC |
| |
| * assembler/LinkBuffer.h: |
| (JSC::LinkBuffer::finalizeCodeWithDisassembly): |
| |
| 2018-04-18 Yusuke Suzuki <utatane.tea@gmail.com> |
| |
| Unreviewed, reland r230697, r230720, and r230724. |
| https://bugs.webkit.org/show_bug.cgi?id=184600 |
| |
| With CatchScope check. |
| |
| * JavaScriptCore.xcodeproj/project.pbxproj: |
| * builtins/ModuleLoaderPrototype.js: |
| (globalPrivate.newRegistryEntry): |
| (requestInstantiate): |
| (link): |
| * jsc.cpp: |
| (convertShebangToJSComment): |
| (fillBufferWithContentsOfFile): |
| (fetchModuleFromLocalFileSystem): |
| (GlobalObject::moduleLoaderFetch): |
| (functionDollarAgentStart): |
| (checkException): |
| (runWithOptions): |
| * parser/NodesAnalyzeModule.cpp: |
| (JSC::ImportDeclarationNode::analyzeModule): |
| * parser/SourceProvider.h: |
| (JSC::WebAssemblySourceProvider::create): |
| (JSC::WebAssemblySourceProvider::WebAssemblySourceProvider): |
| * runtime/AbstractModuleRecord.cpp: |
| (JSC::AbstractModuleRecord::hostResolveImportedModule): |
| (JSC::AbstractModuleRecord::resolveImport): |
| (JSC::AbstractModuleRecord::link): |
| (JSC::AbstractModuleRecord::evaluate): |
| (JSC::identifierToJSValue): Deleted. |
| * runtime/AbstractModuleRecord.h: |
| (JSC::AbstractModuleRecord::moduleEnvironmentMayBeNull): |
| (JSC::AbstractModuleRecord::ImportEntry::isNamespace const): Deleted. |
| * runtime/JSModuleEnvironment.cpp: |
| (JSC::JSModuleEnvironment::getOwnNonIndexPropertyNames): |
| * runtime/JSModuleLoader.cpp: |
| (JSC::JSModuleLoader::evaluate): |
| * runtime/JSModuleRecord.cpp: |
| (JSC::JSModuleRecord::link): |
| (JSC::JSModuleRecord::instantiateDeclarations): |
| * runtime/JSModuleRecord.h: |
| * runtime/ModuleLoaderPrototype.cpp: |
| (JSC::moduleLoaderPrototypeParseModule): |
| (JSC::moduleLoaderPrototypeRequestedModules): |
| (JSC::moduleLoaderPrototypeModuleDeclarationInstantiation): |
| * wasm/WasmCreationMode.h: Copied from Source/JavaScriptCore/wasm/js/WebAssemblyPrototype.h. |
| * wasm/js/JSWebAssemblyHelpers.h: |
| (JSC::getWasmBufferFromValue): |
| (JSC::createSourceBufferFromValue): |
| * wasm/js/JSWebAssemblyInstance.cpp: |
| (JSC::JSWebAssemblyInstance::finalizeCreation): |
| (JSC::JSWebAssemblyInstance::createPrivateModuleKey): |
| (JSC::JSWebAssemblyInstance::create): |
| * wasm/js/JSWebAssemblyInstance.h: |
| * wasm/js/WebAssemblyInstanceConstructor.cpp: |
| (JSC::constructJSWebAssemblyInstance): |
| * wasm/js/WebAssemblyModuleRecord.cpp: |
| (JSC::WebAssemblyModuleRecord::prepareLink): |
| (JSC::WebAssemblyModuleRecord::link): |
| * wasm/js/WebAssemblyModuleRecord.h: |
| * wasm/js/WebAssemblyPrototype.cpp: |
| (JSC::resolve): |
| (JSC::instantiate): |
| (JSC::compileAndInstantiate): |
| (JSC::WebAssemblyPrototype::instantiate): |
| (JSC::webAssemblyInstantiateFunc): |
| (JSC::webAssemblyValidateFunc): |
| * wasm/js/WebAssemblyPrototype.h: |
| |
| 2018-04-17 Carlos Garcia Campos <cgarcia@igalia.com> |
| |
| [GLIB] Make it possible to handle JSCClass external properties not added to the prototype |
| https://bugs.webkit.org/show_bug.cgi?id=184687 |
| |
| Reviewed by Michael Catanzaro. |
| |
| Add JSCClassVTable that can be optionally passed to jsc_context_register_class() to provide implmentations for |
| JSClassDefinition. This is required to implement dynamic properties that can't be added with |
| jsc_class_add_property() for example to implement something like imports object in seed/gjs. |
| |
| * API/glib/JSCClass.cpp: |
| (VTableExceptionHandler::VTableExceptionHandler): Helper class to handle the exceptions in vtable functions that |
| can throw exceptions. |
| (VTableExceptionHandler::~VTableExceptionHandler): |
| (getProperty): Iterate the class chain to call get_property function. |
| (setProperty): Iterate the class chain to call set_property function. |
| (hasProperty): Iterate the class chain to call has_property function. |
| (deleteProperty): Iterate the class chain to call delete_property function. |
| (getPropertyNames): Iterate the class chain to call enumerate_properties function. |
| (jsc_class_class_init): Remove constructed implementation, since we need to initialize the JSClassDefinition in |
| jscClassCreate now. |
| (jscClassCreate): Receive an optional JSCClassVTable that is used to initialize the JSClassDefinition. |
| * API/glib/JSCClass.h: |
| * API/glib/JSCClassPrivate.h: |
| * API/glib/JSCContext.cpp: |
| (jscContextGetRegisteredClass): Helper to get the JSCClass for a given JSClassRef. |
| (jsc_context_register_class): Add JSCClassVTable parameter. |
| * API/glib/JSCContext.h: |
| * API/glib/JSCContextPrivate.h: |
| * API/glib/JSCWrapperMap.cpp: |
| (JSC::WrapperMap::registeredClass const): Get the JSCClass for a given JSClassRef. |
| * API/glib/JSCWrapperMap.h: |
| * API/glib/docs/jsc-glib-4.0-sections.txt: Add new symbols. |
| |
| 2018-04-17 Mark Lam <mark.lam@apple.com> |
| |
| Templatize CodePtr/Refs/FunctionPtrs with PtrTags. |
| https://bugs.webkit.org/show_bug.cgi?id=184702 |
| <rdar://problem/35391681> |
| |
| Reviewed by Filip Pizlo and Saam Barati. |
| |
| 1. Templatized MacroAssemblerCodePtr/Ref, FunctionPtr, and CodeLocation variants |
| to take a PtrTag template argument. |
| 2. Replaced some uses of raw pointers with the equivalent CodePtr / FunctionPtr. |
| |
| * assembler/AbstractMacroAssembler.h: |
| (JSC::AbstractMacroAssembler::differenceBetweenCodePtr): |
| (JSC::AbstractMacroAssembler::linkJump): |
| (JSC::AbstractMacroAssembler::linkPointer): |
| (JSC::AbstractMacroAssembler::getLinkerAddress): |
| (JSC::AbstractMacroAssembler::repatchJump): |
| (JSC::AbstractMacroAssembler::repatchJumpToNop): |
| (JSC::AbstractMacroAssembler::repatchNearCall): |
| (JSC::AbstractMacroAssembler::repatchCompact): |
| (JSC::AbstractMacroAssembler::repatchInt32): |
| (JSC::AbstractMacroAssembler::repatchPointer): |
| (JSC::AbstractMacroAssembler::readPointer): |
| (JSC::AbstractMacroAssembler::replaceWithLoad): |
| (JSC::AbstractMacroAssembler::replaceWithAddressComputation): |
| * assembler/CodeLocation.h: |
| (JSC::CodeLocationCommon:: const): |
| (JSC::CodeLocationCommon::CodeLocationCommon): |
| (JSC::CodeLocationInstruction::CodeLocationInstruction): |
| (JSC::CodeLocationLabel::CodeLocationLabel): |
| (JSC::CodeLocationLabel::retagged): |
| (JSC::CodeLocationLabel:: const): |
| (JSC::CodeLocationJump::CodeLocationJump): |
| (JSC::CodeLocationJump::retagged): |
| (JSC::CodeLocationCall::CodeLocationCall): |
| (JSC::CodeLocationCall::retagged): |
| (JSC::CodeLocationNearCall::CodeLocationNearCall): |
| (JSC::CodeLocationDataLabel32::CodeLocationDataLabel32): |
| (JSC::CodeLocationDataLabelCompact::CodeLocationDataLabelCompact): |
| (JSC::CodeLocationDataLabelPtr::CodeLocationDataLabelPtr): |
| (JSC::CodeLocationConvertibleLoad::CodeLocationConvertibleLoad): |
| (JSC::CodeLocationCommon<tag>::instructionAtOffset): |
| (JSC::CodeLocationCommon<tag>::labelAtOffset): |
| (JSC::CodeLocationCommon<tag>::jumpAtOffset): |
| (JSC::CodeLocationCommon<tag>::callAtOffset): |
| (JSC::CodeLocationCommon<tag>::nearCallAtOffset): |
| (JSC::CodeLocationCommon<tag>::dataLabelPtrAtOffset): |
| (JSC::CodeLocationCommon<tag>::dataLabel32AtOffset): |
| (JSC::CodeLocationCommon<tag>::dataLabelCompactAtOffset): |
| (JSC::CodeLocationCommon<tag>::convertibleLoadAtOffset): |
| (JSC::CodeLocationCommon::instructionAtOffset): Deleted. |
| (JSC::CodeLocationCommon::labelAtOffset): Deleted. |
| (JSC::CodeLocationCommon::jumpAtOffset): Deleted. |
| (JSC::CodeLocationCommon::callAtOffset): Deleted. |
| (JSC::CodeLocationCommon::nearCallAtOffset): Deleted. |
| (JSC::CodeLocationCommon::dataLabelPtrAtOffset): Deleted. |
| (JSC::CodeLocationCommon::dataLabel32AtOffset): Deleted. |
| (JSC::CodeLocationCommon::dataLabelCompactAtOffset): Deleted. |
| (JSC::CodeLocationCommon::convertibleLoadAtOffset): Deleted. |
| * assembler/LinkBuffer.cpp: |
| (JSC::LinkBuffer::finalizeCodeWithoutDisassemblyImpl): |
| (JSC::LinkBuffer::finalizeCodeWithDisassemblyImpl): |
| (JSC::LinkBuffer::finalizeCodeWithoutDisassembly): Deleted. |
| (JSC::LinkBuffer::finalizeCodeWithDisassembly): Deleted. |
| * assembler/LinkBuffer.h: |
| (JSC::LinkBuffer::link): |
| (JSC::LinkBuffer::patch): |
| (JSC::LinkBuffer::entrypoint): |
| (JSC::LinkBuffer::locationOf): |
| (JSC::LinkBuffer::locationOfNearCall): |
| (JSC::LinkBuffer::finalizeCodeWithoutDisassembly): |
| (JSC::LinkBuffer::finalizeCodeWithDisassembly): |
| (JSC::LinkBuffer::trampolineAt): |
| * assembler/MacroAssemblerARM.h: |
| (JSC::MacroAssemblerARM::readCallTarget): |
| (JSC::MacroAssemblerARM::replaceWithJump): |
| (JSC::MacroAssemblerARM::startOfPatchableBranch32WithPatchOnAddress): |
| (JSC::MacroAssemblerARM::startOfPatchableBranchPtrWithPatchOnAddress): |
| (JSC::MacroAssemblerARM::startOfBranchPtrWithPatchOnRegister): |
| (JSC::MacroAssemblerARM::revertJumpReplacementToBranchPtrWithPatch): |
| (JSC::MacroAssemblerARM::revertJumpReplacementToPatchableBranch32WithPatch): |
| (JSC::MacroAssemblerARM::revertJumpReplacementToPatchableBranchPtrWithPatch): |
| (JSC::MacroAssemblerARM::repatchCall): |
| (JSC::MacroAssemblerARM::linkCall): |
| * assembler/MacroAssemblerARM64.h: |
| (JSC::MacroAssemblerARM64::readCallTarget): |
| (JSC::MacroAssemblerARM64::replaceWithVMHalt): |
| (JSC::MacroAssemblerARM64::replaceWithJump): |
| (JSC::MacroAssemblerARM64::startOfBranchPtrWithPatchOnRegister): |
| (JSC::MacroAssemblerARM64::startOfPatchableBranchPtrWithPatchOnAddress): |
| (JSC::MacroAssemblerARM64::startOfPatchableBranch32WithPatchOnAddress): |
| (JSC::MacroAssemblerARM64::revertJumpReplacementToBranchPtrWithPatch): |
| (JSC::MacroAssemblerARM64::revertJumpReplacementToPatchableBranchPtrWithPatch): |
| (JSC::MacroAssemblerARM64::revertJumpReplacementToPatchableBranch32WithPatch): |
| (JSC::MacroAssemblerARM64::repatchCall): |
| (JSC::MacroAssemblerARM64::linkCall): |
| * assembler/MacroAssemblerARMv7.h: |
| (JSC::MacroAssemblerARMv7::replaceWithJump): |
| (JSC::MacroAssemblerARMv7::readCallTarget): |
| (JSC::MacroAssemblerARMv7::startOfBranchPtrWithPatchOnRegister): |
| (JSC::MacroAssemblerARMv7::revertJumpReplacementToBranchPtrWithPatch): |
| (JSC::MacroAssemblerARMv7::startOfPatchableBranchPtrWithPatchOnAddress): |
| (JSC::MacroAssemblerARMv7::startOfPatchableBranch32WithPatchOnAddress): |
| (JSC::MacroAssemblerARMv7::revertJumpReplacementToPatchableBranchPtrWithPatch): |
| (JSC::MacroAssemblerARMv7::revertJumpReplacementToPatchableBranch32WithPatch): |
| (JSC::MacroAssemblerARMv7::repatchCall): |
| (JSC::MacroAssemblerARMv7::linkCall): |
| * assembler/MacroAssemblerCodeRef.cpp: |
| (JSC::MacroAssemblerCodePtrBase::dumpWithName): |
| (JSC::MacroAssemblerCodeRefBase::tryToDisassemble): |
| (JSC::MacroAssemblerCodeRefBase::disassembly): |
| (JSC::MacroAssemblerCodePtr::createLLIntCodePtr): Deleted. |
| (JSC::MacroAssemblerCodePtr::dumpWithName const): Deleted. |
| (JSC::MacroAssemblerCodePtr::dump const): Deleted. |
| (JSC::MacroAssemblerCodeRef::createLLIntCodeRef): Deleted. |
| (JSC::MacroAssemblerCodeRef::tryToDisassemble const): Deleted. |
| (JSC::MacroAssemblerCodeRef::disassembly const): Deleted. |
| (JSC::MacroAssemblerCodeRef::dump const): Deleted. |
| * assembler/MacroAssemblerCodeRef.h: |
| (JSC::FunctionPtr::FunctionPtr): |
| (JSC::FunctionPtr::retagged const): |
| (JSC::FunctionPtr::retaggedExecutableAddress const): |
| (JSC::FunctionPtr::operator== const): |
| (JSC::FunctionPtr::operator!= const): |
| (JSC::ReturnAddressPtr::ReturnAddressPtr): |
| (JSC::MacroAssemblerCodePtr::MacroAssemblerCodePtr): |
| (JSC::MacroAssemblerCodePtr::createFromExecutableAddress): |
| (JSC::MacroAssemblerCodePtr::retagged const): |
| (JSC::MacroAssemblerCodePtr:: const): |
| (JSC::MacroAssemblerCodePtr::dumpWithName const): |
| (JSC::MacroAssemblerCodePtr::dump const): |
| (JSC::MacroAssemblerCodePtrHash::hash): |
| (JSC::MacroAssemblerCodePtrHash::equal): |
| (JSC::MacroAssemblerCodeRef::MacroAssemblerCodeRef): |
| (JSC::MacroAssemblerCodeRef::createSelfManagedCodeRef): |
| (JSC::MacroAssemblerCodeRef::code const): |
| (JSC::MacroAssemblerCodeRef::retaggedCode const): |
| (JSC::MacroAssemblerCodeRef::retagged const): |
| (JSC::MacroAssemblerCodeRef::tryToDisassemble const): |
| (JSC::MacroAssemblerCodeRef::disassembly const): |
| (JSC::MacroAssemblerCodeRef::dump const): |
| (JSC::FunctionPtr<tag>::FunctionPtr): |
| * assembler/MacroAssemblerMIPS.h: |
| (JSC::MacroAssemblerMIPS::readCallTarget): |
| (JSC::MacroAssemblerMIPS::replaceWithJump): |
| (JSC::MacroAssemblerMIPS::startOfPatchableBranch32WithPatchOnAddress): |
| (JSC::MacroAssemblerMIPS::startOfBranchPtrWithPatchOnRegister): |
| (JSC::MacroAssemblerMIPS::revertJumpReplacementToBranchPtrWithPatch): |
| (JSC::MacroAssemblerMIPS::startOfPatchableBranchPtrWithPatchOnAddress): |
| (JSC::MacroAssemblerMIPS::revertJumpReplacementToPatchableBranch32WithPatch): |
| (JSC::MacroAssemblerMIPS::revertJumpReplacementToPatchableBranchPtrWithPatch): |
| (JSC::MacroAssemblerMIPS::repatchCall): |
| (JSC::MacroAssemblerMIPS::linkCall): |
| * assembler/MacroAssemblerX86.h: |
| (JSC::MacroAssemblerX86::readCallTarget): |
| (JSC::MacroAssemblerX86::startOfBranchPtrWithPatchOnRegister): |
| (JSC::MacroAssemblerX86::startOfPatchableBranchPtrWithPatchOnAddress): |
| (JSC::MacroAssemblerX86::startOfPatchableBranch32WithPatchOnAddress): |
| (JSC::MacroAssemblerX86::revertJumpReplacementToBranchPtrWithPatch): |
| (JSC::MacroAssemblerX86::revertJumpReplacementToPatchableBranchPtrWithPatch): |
| (JSC::MacroAssemblerX86::revertJumpReplacementToPatchableBranch32WithPatch): |
| (JSC::MacroAssemblerX86::repatchCall): |
| (JSC::MacroAssemblerX86::linkCall): |
| * assembler/MacroAssemblerX86Common.h: |
| (JSC::MacroAssemblerX86Common::repatchCompact): |
| (JSC::MacroAssemblerX86Common::replaceWithVMHalt): |
| (JSC::MacroAssemblerX86Common::replaceWithJump): |
| * assembler/MacroAssemblerX86_64.h: |
| (JSC::MacroAssemblerX86_64::readCallTarget): |
| (JSC::MacroAssemblerX86_64::startOfBranchPtrWithPatchOnRegister): |
| (JSC::MacroAssemblerX86_64::startOfBranch32WithPatchOnRegister): |
| (JSC::MacroAssemblerX86_64::startOfPatchableBranchPtrWithPatchOnAddress): |
| (JSC::MacroAssemblerX86_64::startOfPatchableBranch32WithPatchOnAddress): |
| (JSC::MacroAssemblerX86_64::revertJumpReplacementToPatchableBranchPtrWithPatch): |
| (JSC::MacroAssemblerX86_64::revertJumpReplacementToPatchableBranch32WithPatch): |
| (JSC::MacroAssemblerX86_64::revertJumpReplacementToBranchPtrWithPatch): |
| (JSC::MacroAssemblerX86_64::repatchCall): |
| (JSC::MacroAssemblerX86_64::linkCall): |
| * assembler/testmasm.cpp: |
| (JSC::compile): |
| (JSC::invoke): |
| (JSC::testProbeModifiesProgramCounter): |
| * b3/B3Compilation.cpp: |
| (JSC::B3::Compilation::Compilation): |
| * b3/B3Compilation.h: |
| (JSC::B3::Compilation::code const): |
| (JSC::B3::Compilation::codeRef const): |
| * b3/B3Compile.cpp: |
| (JSC::B3::compile): |
| * b3/B3LowerMacros.cpp: |
| * b3/air/AirDisassembler.cpp: |
| (JSC::B3::Air::Disassembler::dump): |
| * b3/air/testair.cpp: |
| * b3/testb3.cpp: |
| (JSC::B3::invoke): |
| (JSC::B3::testInterpreter): |
| (JSC::B3::testEntrySwitchSimple): |
| (JSC::B3::testEntrySwitchNoEntrySwitch): |
| (JSC::B3::testEntrySwitchWithCommonPaths): |
| (JSC::B3::testEntrySwitchWithCommonPathsAndNonTrivialEntrypoint): |
| (JSC::B3::testEntrySwitchLoop): |
| * bytecode/AccessCase.cpp: |
| (JSC::AccessCase::generateImpl): |
| * bytecode/AccessCaseSnippetParams.cpp: |
| (JSC::SlowPathCallGeneratorWithArguments::generateImpl): |
| * bytecode/ByValInfo.h: |
| (JSC::ByValInfo::ByValInfo): |
| * bytecode/CallLinkInfo.cpp: |
| (JSC::CallLinkInfo::callReturnLocation): |
| (JSC::CallLinkInfo::patchableJump): |
| (JSC::CallLinkInfo::hotPathBegin): |
| (JSC::CallLinkInfo::slowPathStart): |
| * bytecode/CallLinkInfo.h: |
| (JSC::CallLinkInfo::setCallLocations): |
| (JSC::CallLinkInfo::hotPathOther): |
| * bytecode/CodeBlock.cpp: |
| (JSC::CodeBlock::finishCreation): |
| * bytecode/GetByIdStatus.cpp: |
| (JSC::GetByIdStatus::computeForStubInfoWithoutExitSiteFeedback): |
| * bytecode/GetByIdVariant.cpp: |
| (JSC::GetByIdVariant::GetByIdVariant): |
| (JSC::GetByIdVariant::dumpInContext const): |
| * bytecode/GetByIdVariant.h: |
| (JSC::GetByIdVariant::customAccessorGetter const): |
| * bytecode/GetterSetterAccessCase.cpp: |
| (JSC::GetterSetterAccessCase::create): |
| (JSC::GetterSetterAccessCase::GetterSetterAccessCase): |
| (JSC::GetterSetterAccessCase::dumpImpl const): |
| * bytecode/GetterSetterAccessCase.h: |
| (JSC::GetterSetterAccessCase::customAccessor const): |
| (): Deleted. |
| * bytecode/HandlerInfo.h: |
| (JSC::HandlerInfo::initialize): |
| * bytecode/InlineAccess.cpp: |
| (JSC::linkCodeInline): |
| (JSC::InlineAccess::rewireStubAsJump): |
| * bytecode/InlineAccess.h: |
| * bytecode/JumpTable.h: |
| (JSC::StringJumpTable::ctiForValue): |
| (JSC::SimpleJumpTable::ctiForValue): |
| * bytecode/LLIntCallLinkInfo.h: |
| (JSC::LLIntCallLinkInfo::unlink): |
| * bytecode/PolymorphicAccess.cpp: |
| (JSC::AccessGenerationState::emitExplicitExceptionHandler): |
| (JSC::PolymorphicAccess::regenerate): |
| * bytecode/PolymorphicAccess.h: |
| (JSC::AccessGenerationResult::AccessGenerationResult): |
| (JSC::AccessGenerationResult::code const): |
| * bytecode/StructureStubInfo.h: |
| (JSC::StructureStubInfo::slowPathCallLocation): |
| (JSC::StructureStubInfo::doneLocation): |
| (JSC::StructureStubInfo::slowPathStartLocation): |
| (JSC::StructureStubInfo::patchableJumpForIn): |
| * dfg/DFGCommonData.h: |
| (JSC::DFG::CommonData::appendCatchEntrypoint): |
| * dfg/DFGDisassembler.cpp: |
| (JSC::DFG::Disassembler::dumpDisassembly): |
| * dfg/DFGDriver.h: |
| * dfg/DFGJITCompiler.cpp: |
| (JSC::DFG::JITCompiler::linkOSRExits): |
| (JSC::DFG::JITCompiler::compileExceptionHandlers): |
| (JSC::DFG::JITCompiler::link): |
| (JSC::DFG::JITCompiler::compileFunction): |
| (JSC::DFG::JITCompiler::noticeCatchEntrypoint): |
| * dfg/DFGJITCompiler.h: |
| (JSC::DFG::CallLinkRecord::CallLinkRecord): |
| (JSC::DFG::JITCompiler::appendCall): |
| (JSC::DFG::JITCompiler::JSCallRecord::JSCallRecord): |
| (JSC::DFG::JITCompiler::JSDirectCallRecord::JSDirectCallRecord): |
| (JSC::DFG::JITCompiler::JSDirectTailCallRecord::JSDirectTailCallRecord): |
| * dfg/DFGJITFinalizer.cpp: |
| (JSC::DFG::JITFinalizer::JITFinalizer): |
| (JSC::DFG::JITFinalizer::finalize): |
| (JSC::DFG::JITFinalizer::finalizeFunction): |
| * dfg/DFGJITFinalizer.h: |
| * dfg/DFGJumpReplacement.h: |
| (JSC::DFG::JumpReplacement::JumpReplacement): |
| * dfg/DFGNode.h: |
| * dfg/DFGOSREntry.cpp: |
| (JSC::DFG::prepareOSREntry): |
| (JSC::DFG::prepareCatchOSREntry): |
| * dfg/DFGOSREntry.h: |
| (JSC::DFG::prepareOSREntry): |
| * dfg/DFGOSRExit.cpp: |
| (JSC::DFG::OSRExit::executeOSRExit): |
| (JSC::DFG::reifyInlinedCallFrames): |
| (JSC::DFG::adjustAndJumpToTarget): |
| (JSC::DFG::OSRExit::codeLocationForRepatch const): |
| (JSC::DFG::OSRExit::emitRestoreArguments): |
| (JSC::DFG::OSRExit::compileOSRExit): |
| * dfg/DFGOSRExit.h: |
| * dfg/DFGOSRExitCompilerCommon.cpp: |
| (JSC::DFG::handleExitCounts): |
| (JSC::DFG::reifyInlinedCallFrames): |
| (JSC::DFG::osrWriteBarrier): |
| (JSC::DFG::adjustAndJumpToTarget): |
| * dfg/DFGOperations.cpp: |
| * dfg/DFGSlowPathGenerator.h: |
| (JSC::DFG::CallResultAndArgumentsSlowPathGenerator::CallResultAndArgumentsSlowPathGenerator): |
| (JSC::DFG::CallResultAndArgumentsSlowPathGenerator::unpackAndGenerate): |
| (JSC::DFG::slowPathCall): |
| * dfg/DFGSpeculativeJIT.cpp: |
| (JSC::DFG::SpeculativeJIT::compileMathIC): |
| (JSC::DFG::SpeculativeJIT::compileCallDOM): |
| (JSC::DFG::SpeculativeJIT::compileCallDOMGetter): |
| (JSC::DFG::SpeculativeJIT::emitSwitchIntJump): |
| (JSC::DFG::SpeculativeJIT::emitSwitchImm): |
| (JSC::DFG::SpeculativeJIT::emitSwitchStringOnString): |
| (JSC::DFG::SpeculativeJIT::compileHasIndexedProperty): |
| (JSC::DFG::SpeculativeJIT::compileGetDirectPname): |
| (JSC::DFG::SpeculativeJIT::cachedPutById): |
| * dfg/DFGSpeculativeJIT.h: |
| (JSC::DFG::SpeculativeJIT::callOperation): |
| (JSC::DFG::SpeculativeJIT::appendCall): |
| (JSC::DFG::SpeculativeJIT::appendCallWithCallFrameRollbackOnException): |
| (JSC::DFG::SpeculativeJIT::appendCallWithCallFrameRollbackOnExceptionSetResult): |
| (JSC::DFG::SpeculativeJIT::appendCallSetResult): |
| * dfg/DFGSpeculativeJIT64.cpp: |
| (JSC::DFG::SpeculativeJIT::cachedGetById): |
| (JSC::DFG::SpeculativeJIT::cachedGetByIdWithThis): |
| (JSC::DFG::SpeculativeJIT::compile): |
| * dfg/DFGThunks.cpp: |
| (JSC::DFG::osrExitThunkGenerator): |
| (JSC::DFG::osrExitGenerationThunkGenerator): |
| (JSC::DFG::osrEntryThunkGenerator): |
| * dfg/DFGThunks.h: |
| * disassembler/ARM64Disassembler.cpp: |
| (JSC::tryToDisassemble): |
| * disassembler/ARMv7Disassembler.cpp: |
| (JSC::tryToDisassemble): |
| * disassembler/Disassembler.cpp: |
| (JSC::disassemble): |
| (JSC::disassembleAsynchronously): |
| * disassembler/Disassembler.h: |
| (JSC::tryToDisassemble): |
| * disassembler/UDis86Disassembler.cpp: |
| (JSC::tryToDisassembleWithUDis86): |
| * disassembler/UDis86Disassembler.h: |
| (JSC::tryToDisassembleWithUDis86): |
| * disassembler/X86Disassembler.cpp: |
| (JSC::tryToDisassemble): |
| * ftl/FTLCompile.cpp: |
| (JSC::FTL::compile): |
| * ftl/FTLExceptionTarget.cpp: |
| (JSC::FTL::ExceptionTarget::label): |
| (JSC::FTL::ExceptionTarget::jumps): |
| * ftl/FTLExceptionTarget.h: |
| * ftl/FTLGeneratedFunction.h: |
| * ftl/FTLJITCode.cpp: |
| (JSC::FTL::JITCode::initializeB3Code): |
| (JSC::FTL::JITCode::initializeAddressForCall): |
| (JSC::FTL::JITCode::initializeArityCheckEntrypoint): |
| (JSC::FTL::JITCode::addressForCall): |
| (JSC::FTL::JITCode::executableAddressAtOffset): |
| * ftl/FTLJITCode.h: |
| (JSC::FTL::JITCode::b3Code const): |
| * ftl/FTLJITFinalizer.cpp: |
| (JSC::FTL::JITFinalizer::finalizeCommon): |
| * ftl/FTLLazySlowPath.cpp: |
| (JSC::FTL::LazySlowPath::initialize): |
| (JSC::FTL::LazySlowPath::generate): |
| * ftl/FTLLazySlowPath.h: |
| (JSC::FTL::LazySlowPath::patchableJump const): |
| (JSC::FTL::LazySlowPath::done const): |
| (JSC::FTL::LazySlowPath::stub const): |
| * ftl/FTLLazySlowPathCall.h: |
| (JSC::FTL::createLazyCallGenerator): |
| * ftl/FTLLink.cpp: |
| (JSC::FTL::link): |
| * ftl/FTLLowerDFGToB3.cpp: |
| (JSC::FTL::DFG::LowerDFGToB3::lower): |
| (JSC::FTL::DFG::LowerDFGToB3::compileCallOrConstruct): |
| (JSC::FTL::DFG::LowerDFGToB3::compileDirectCallOrConstruct): |
| (JSC::FTL::DFG::LowerDFGToB3::compileTailCall): |
| (JSC::FTL::DFG::LowerDFGToB3::compileCallOrConstructVarargsSpread): |
| (JSC::FTL::DFG::LowerDFGToB3::compileCallOrConstructVarargs): |
| (JSC::FTL::DFG::LowerDFGToB3::compileCallEval): |
| (JSC::FTL::DFG::LowerDFGToB3::compileInvalidationPoint): |
| (JSC::FTL::DFG::LowerDFGToB3::compileIn): |
| (JSC::FTL::DFG::LowerDFGToB3::compileCheckSubClass): |
| (JSC::FTL::DFG::LowerDFGToB3::compileCallDOM): |
| (JSC::FTL::DFG::LowerDFGToB3::compileCallDOMGetter): |
| (JSC::FTL::DFG::LowerDFGToB3::lazySlowPath): |
| * ftl/FTLOSRExit.cpp: |
| (JSC::FTL::OSRExit::codeLocationForRepatch const): |
| * ftl/FTLOSRExit.h: |
| * ftl/FTLOSRExitCompiler.cpp: |
| (JSC::FTL::compileStub): |
| (JSC::FTL::compileFTLOSRExit): |
| * ftl/FTLOSRExitHandle.cpp: |
| (JSC::FTL::OSRExitHandle::emitExitThunk): |
| * ftl/FTLOperations.cpp: |
| (JSC::FTL::compileFTLLazySlowPath): |
| * ftl/FTLPatchpointExceptionHandle.cpp: |
| (JSC::FTL::PatchpointExceptionHandle::scheduleExitCreationForUnwind): |
| * ftl/FTLSlowPathCall.cpp: |
| (JSC::FTL::SlowPathCallContext::keyWithTarget const): |
| (JSC::FTL::SlowPathCallContext::makeCall): |
| * ftl/FTLSlowPathCall.h: |
| (JSC::FTL::callOperation): |
| * ftl/FTLSlowPathCallKey.cpp: |
| (JSC::FTL::SlowPathCallKey::dump const): |
| * ftl/FTLSlowPathCallKey.h: |
| (JSC::FTL::SlowPathCallKey::SlowPathCallKey): |
| (JSC::FTL::SlowPathCallKey::callTarget const): |
| (JSC::FTL::SlowPathCallKey::withCallTarget): |
| (JSC::FTL::SlowPathCallKey::hash const): |
| (JSC::FTL::SlowPathCallKey::callPtrTag const): Deleted. |
| * ftl/FTLState.cpp: |
| (JSC::FTL::State::State): |
| * ftl/FTLThunks.cpp: |
| (JSC::FTL::genericGenerationThunkGenerator): |
| (JSC::FTL::osrExitGenerationThunkGenerator): |
| (JSC::FTL::lazySlowPathGenerationThunkGenerator): |
| (JSC::FTL::slowPathCallThunkGenerator): |
| * ftl/FTLThunks.h: |
| (JSC::FTL::generateIfNecessary): |
| (JSC::FTL::keyForThunk): |
| (JSC::FTL::Thunks::getSlowPathCallThunk): |
| (JSC::FTL::Thunks::keyForSlowPathCallThunk): |
| * interpreter/InterpreterInlines.h: |
| (JSC::Interpreter::getOpcodeID): |
| * jit/AssemblyHelpers.cpp: |
| (JSC::AssemblyHelpers::callExceptionFuzz): |
| (JSC::AssemblyHelpers::emitDumbVirtualCall): |
| (JSC::AssemblyHelpers::debugCall): |
| * jit/CCallHelpers.cpp: |
| (JSC::CCallHelpers::ensureShadowChickenPacket): |
| * jit/ExecutableAllocator.cpp: |
| (JSC::FixedVMPoolExecutableAllocator::initializeSeparatedWXHeaps): |
| (JSC::FixedVMPoolExecutableAllocator::jitWriteThunkGenerator): |
| * jit/ExecutableAllocator.h: |
| (JSC::performJITMemcpy): |
| * jit/GCAwareJITStubRoutine.cpp: |
| (JSC::GCAwareJITStubRoutine::GCAwareJITStubRoutine): |
| (JSC::MarkingGCAwareJITStubRoutine::MarkingGCAwareJITStubRoutine): |
| (JSC::GCAwareJITStubRoutineWithExceptionHandler::GCAwareJITStubRoutineWithExceptionHandler): |
| (JSC::createJITStubRoutine): |
| * jit/GCAwareJITStubRoutine.h: |
| (JSC::createJITStubRoutine): |
| * jit/JIT.cpp: |
| (JSC::ctiPatchCallByReturnAddress): |
| (JSC::JIT::compileWithoutLinking): |
| (JSC::JIT::link): |
| (JSC::JIT::privateCompileExceptionHandlers): |
| * jit/JIT.h: |
| (JSC::CallRecord::CallRecord): |
| * jit/JITArithmetic.cpp: |
| (JSC::JIT::emitMathICFast): |
| (JSC::JIT::emitMathICSlow): |
| * jit/JITCall.cpp: |
| (JSC::JIT::compileOpCallSlowCase): |
| * jit/JITCall32_64.cpp: |
| (JSC::JIT::compileOpCallSlowCase): |
| * jit/JITCode.cpp: |
| (JSC::JITCodeWithCodeRef::JITCodeWithCodeRef): |
| (JSC::JITCodeWithCodeRef::executableAddressAtOffset): |
| (JSC::DirectJITCode::DirectJITCode): |
| (JSC::DirectJITCode::initializeCodeRef): |
| (JSC::DirectJITCode::addressForCall): |
| (JSC::NativeJITCode::NativeJITCode): |
| (JSC::NativeJITCode::initializeCodeRef): |
| (JSC::NativeJITCode::addressForCall): |
| * jit/JITCode.h: |
| * jit/JITCodeMap.h: |
| (JSC::JITCodeMap::Entry::Entry): |
| (JSC::JITCodeMap::Entry::codeLocation): |
| (JSC::JITCodeMap::append): |
| (JSC::JITCodeMap::find const): |
| * jit/JITDisassembler.cpp: |
| (JSC::JITDisassembler::dumpDisassembly): |
| * jit/JITExceptions.cpp: |
| (JSC::genericUnwind): |
| * jit/JITInlineCacheGenerator.cpp: |
| (JSC::JITByIdGenerator::finalize): |
| * jit/JITInlines.h: |
| (JSC::JIT::emitNakedCall): |
| (JSC::JIT::emitNakedTailCall): |
| (JSC::JIT::appendCallWithExceptionCheck): |
| (JSC::JIT::appendCallWithExceptionCheckAndSlowPathReturnType): |
| (JSC::JIT::appendCallWithCallFrameRollbackOnException): |
| (JSC::JIT::appendCallWithExceptionCheckSetJSValueResult): |
| (JSC::JIT::appendCallWithExceptionCheckSetJSValueResultWithProfile): |
| * jit/JITMathIC.h: |
| (JSC::isProfileEmpty): |
| * jit/JITOpcodes.cpp: |
| (JSC::JIT::emit_op_catch): |
| (JSC::JIT::emit_op_switch_imm): |
| (JSC::JIT::emit_op_switch_char): |
| (JSC::JIT::emit_op_switch_string): |
| (JSC::JIT::privateCompileHasIndexedProperty): |
| (JSC::JIT::emitSlow_op_has_indexed_property): |
| * jit/JITOpcodes32_64.cpp: |
| (JSC::JIT::privateCompileHasIndexedProperty): |
| * jit/JITOperations.cpp: |
| (JSC::getByVal): |
| * jit/JITPropertyAccess.cpp: |
| (JSC::JIT::stringGetByValStubGenerator): |
| (JSC::JIT::emitGetByValWithCachedId): |
| (JSC::JIT::emitSlow_op_get_by_val): |
| (JSC::JIT::emitPutByValWithCachedId): |
| (JSC::JIT::emitSlow_op_put_by_val): |
| (JSC::JIT::emitSlow_op_try_get_by_id): |
| (JSC::JIT::emitSlow_op_get_by_id_direct): |
| (JSC::JIT::emitSlow_op_get_by_id): |
| (JSC::JIT::emitSlow_op_get_by_id_with_this): |
| (JSC::JIT::emitSlow_op_put_by_id): |
| (JSC::JIT::privateCompileGetByVal): |
| (JSC::JIT::privateCompileGetByValWithCachedId): |
| (JSC::JIT::privateCompilePutByVal): |
| (JSC::JIT::privateCompilePutByValWithCachedId): |
| * jit/JITPropertyAccess32_64.cpp: |
| (JSC::JIT::stringGetByValStubGenerator): |
| (JSC::JIT::emitSlow_op_get_by_val): |
| (JSC::JIT::emitSlow_op_put_by_val): |
| * jit/JITStubRoutine.h: |
| (JSC::JITStubRoutine::JITStubRoutine): |
| (JSC::JITStubRoutine::createSelfManagedRoutine): |
| (JSC::JITStubRoutine::code const): |
| (JSC::JITStubRoutine::asCodePtr): |
| * jit/JITThunks.cpp: |
| (JSC::JITThunks::ctiNativeCall): |
| (JSC::JITThunks::ctiNativeConstruct): |
| (JSC::JITThunks::ctiNativeTailCall): |
| (JSC::JITThunks::ctiNativeTailCallWithoutSavedTags): |
| (JSC::JITThunks::ctiInternalFunctionCall): |
| (JSC::JITThunks::ctiInternalFunctionConstruct): |
| (JSC::JITThunks::ctiStub): |
| (JSC::JITThunks::existingCTIStub): |
| (JSC::JITThunks::hostFunctionStub): |
| * jit/JITThunks.h: |
| * jit/PCToCodeOriginMap.cpp: |
| (JSC::PCToCodeOriginMap::PCToCodeOriginMap): |
| * jit/PCToCodeOriginMap.h: |
| * jit/PolymorphicCallStubRoutine.cpp: |
| (JSC::PolymorphicCallStubRoutine::PolymorphicCallStubRoutine): |
| * jit/PolymorphicCallStubRoutine.h: |
| * jit/Repatch.cpp: |
| (JSC::readPutICCallTarget): |
| (JSC::ftlThunkAwareRepatchCall): |
| (JSC::appropriateOptimizingGetByIdFunction): |
| (JSC::appropriateGetByIdFunction): |
| (JSC::tryCacheGetByID): |
| (JSC::repatchGetByID): |
| (JSC::tryCachePutByID): |
| (JSC::repatchPutByID): |
| (JSC::tryCacheIn): |
| (JSC::repatchIn): |
| (JSC::linkSlowFor): |
| (JSC::linkFor): |
| (JSC::linkDirectFor): |
| (JSC::revertCall): |
| (JSC::unlinkFor): |
| (JSC::linkVirtualFor): |
| (JSC::linkPolymorphicCall): |
| (JSC::resetGetByID): |
| (JSC::resetPutByID): |
| * jit/Repatch.h: |
| * jit/SlowPathCall.h: |
| (JSC::JITSlowPathCall::call): |
| * jit/SpecializedThunkJIT.h: |
| (JSC::SpecializedThunkJIT::finalize): |
| (JSC::SpecializedThunkJIT::callDoubleToDouble): |
| (JSC::SpecializedThunkJIT::callDoubleToDoublePreservingReturn): |
| * jit/ThunkGenerator.h: |
| * jit/ThunkGenerators.cpp: |
| (JSC::throwExceptionFromCallSlowPathGenerator): |
| (JSC::slowPathFor): |
| (JSC::linkCallThunkGenerator): |
| (JSC::linkPolymorphicCallThunkGenerator): |
| (JSC::virtualThunkFor): |
| (JSC::nativeForGenerator): |
| (JSC::nativeCallGenerator): |
| (JSC::nativeTailCallGenerator): |
| (JSC::nativeTailCallWithoutSavedTagsGenerator): |
| (JSC::nativeConstructGenerator): |
| (JSC::internalFunctionCallGenerator): |
| (JSC::internalFunctionConstructGenerator): |
| (JSC::arityFixupGenerator): |
| (JSC::unreachableGenerator): |
| (JSC::charCodeAtThunkGenerator): |
| (JSC::charAtThunkGenerator): |
| (JSC::fromCharCodeThunkGenerator): |
| (JSC::clz32ThunkGenerator): |
| (JSC::sqrtThunkGenerator): |
| (JSC::floorThunkGenerator): |
| (JSC::ceilThunkGenerator): |
| (JSC::truncThunkGenerator): |
| (JSC::roundThunkGenerator): |
| (JSC::expThunkGenerator): |
| (JSC::logThunkGenerator): |
| (JSC::absThunkGenerator): |
| (JSC::imulThunkGenerator): |
| (JSC::randomThunkGenerator): |
| (JSC::boundThisNoArgsFunctionCallGenerator): |
| * jit/ThunkGenerators.h: |
| * llint/LLIntData.cpp: |
| (JSC::LLInt::initialize): |
| * llint/LLIntData.h: |
| (JSC::LLInt::getExecutableAddress): |
| (JSC::LLInt::getCodePtr): |
| (JSC::LLInt::getCodeRef): |
| (JSC::LLInt::getCodeFunctionPtr): |
| * llint/LLIntEntrypoint.cpp: |
| (JSC::LLInt::setFunctionEntrypoint): |
| (JSC::LLInt::setEvalEntrypoint): |
| (JSC::LLInt::setProgramEntrypoint): |
| (JSC::LLInt::setModuleProgramEntrypoint): |
| * llint/LLIntExceptions.cpp: |
| (JSC::LLInt::callToThrow): |
| * llint/LLIntSlowPaths.cpp: |
| (JSC::LLInt::LLINT_SLOW_PATH_DECL): |
| (JSC::LLInt::setUpCall): |
| * llint/LLIntThunks.cpp: |
| (JSC::vmEntryToWasm): |
| (JSC::LLInt::generateThunkWithJumpTo): |
| (JSC::LLInt::functionForCallEntryThunkGenerator): |
| (JSC::LLInt::functionForConstructEntryThunkGenerator): |
| (JSC::LLInt::functionForCallArityCheckThunkGenerator): |
| (JSC::LLInt::functionForConstructArityCheckThunkGenerator): |
| (JSC::LLInt::evalEntryThunkGenerator): |
| (JSC::LLInt::programEntryThunkGenerator): |
| (JSC::LLInt::moduleProgramEntryThunkGenerator): |
| * llint/LLIntThunks.h: |
| * llint/LowLevelInterpreter.asm: |
| * llint/LowLevelInterpreter32_64.asm: |
| * llint/LowLevelInterpreter64.asm: |
| * profiler/ProfilerCompilation.cpp: |
| (JSC::Profiler::Compilation::addOSRExitSite): |
| * profiler/ProfilerCompilation.h: |
| * profiler/ProfilerOSRExitSite.cpp: |
| (JSC::Profiler::OSRExitSite::toJS const): |
| * profiler/ProfilerOSRExitSite.h: |
| (JSC::Profiler::OSRExitSite::OSRExitSite): |
| (JSC::Profiler::OSRExitSite::codeAddress const): |
| (JSC::Profiler::OSRExitSite:: const): Deleted. |
| * runtime/ExecutableBase.cpp: |
| (JSC::ExecutableBase::clearCode): |
| * runtime/ExecutableBase.h: |
| (JSC::ExecutableBase::entrypointFor): |
| * runtime/NativeExecutable.cpp: |
| (JSC::NativeExecutable::finishCreation): |
| * runtime/NativeFunction.h: |
| (JSC::TaggedNativeFunction::TaggedNativeFunction): |
| (JSC::TaggedNativeFunction::operator NativeFunction): |
| * runtime/PtrTag.h: |
| (JSC::tagCodePtr): |
| (JSC::untagCodePtr): |
| (JSC::retagCodePtr): |
| (JSC::tagCFunctionPtr): |
| (JSC::untagCFunctionPtr): |
| (JSC::nextPtrTagID): Deleted. |
| * runtime/PutPropertySlot.h: |
| (JSC::PutPropertySlot::PutPropertySlot): |
| (JSC::PutPropertySlot::setCustomValue): |
| (JSC::PutPropertySlot::setCustomAccessor): |
| (JSC::PutPropertySlot::customSetter const): |
| * runtime/ScriptExecutable.cpp: |
| (JSC::ScriptExecutable::installCode): |
| * runtime/VM.cpp: |
| (JSC::VM::getHostFunction): |
| (JSC::VM::getCTIInternalFunctionTrampolineFor): |
| * runtime/VM.h: |
| (JSC::VM::getCTIStub): |
| * wasm/WasmB3IRGenerator.cpp: |
| (JSC::Wasm::B3IRGenerator::B3IRGenerator): |
| (JSC::Wasm::B3IRGenerator::emitExceptionCheck): |
| (JSC::Wasm::B3IRGenerator::emitTierUpCheck): |
| (JSC::Wasm::B3IRGenerator::addCall): |
| (JSC::Wasm::B3IRGenerator::addCallIndirect): |
| * wasm/WasmBBQPlan.cpp: |
| (JSC::Wasm::BBQPlan::prepare): |
| (JSC::Wasm::BBQPlan::complete): |
| * wasm/WasmBBQPlan.h: |
| * wasm/WasmBinding.cpp: |
| (JSC::Wasm::wasmToWasm): |
| * wasm/WasmBinding.h: |
| * wasm/WasmCallee.h: |
| (JSC::Wasm::Callee::entrypoint const): |
| * wasm/WasmCallingConvention.h: |
| (JSC::Wasm::CallingConvention::setupFrameInPrologue const): |
| * wasm/WasmCodeBlock.h: |
| (JSC::Wasm::CodeBlock::entrypointLoadLocationFromFunctionIndexSpace): |
| * wasm/WasmFaultSignalHandler.cpp: |
| (JSC::Wasm::trapHandler): |
| * wasm/WasmFormat.h: |
| * wasm/WasmInstance.h: |
| * wasm/WasmOMGPlan.cpp: |
| (JSC::Wasm::OMGPlan::work): |
| * wasm/WasmThunks.cpp: |
| (JSC::Wasm::throwExceptionFromWasmThunkGenerator): |
| (JSC::Wasm::throwStackOverflowFromWasmThunkGenerator): |
| (JSC::Wasm::triggerOMGTierUpThunkGenerator): |
| (JSC::Wasm::Thunks::stub): |
| (JSC::Wasm::Thunks::existingStub): |
| * wasm/WasmThunks.h: |
| * wasm/js/JSToWasm.cpp: |
| (JSC::Wasm::createJSToWasmWrapper): |
| * wasm/js/JSWebAssemblyCodeBlock.h: |
| * wasm/js/WasmToJS.cpp: |
| (JSC::Wasm::handleBadI64Use): |
| (JSC::Wasm::wasmToJS): |
| * wasm/js/WasmToJS.h: |
| * wasm/js/WebAssemblyFunction.h: |
| * yarr/YarrJIT.cpp: |
| (JSC::Yarr::YarrGenerator::loadFromFrameAndJump): |
| (JSC::Yarr::YarrGenerator::BacktrackingState::linkDataLabels): |
| (JSC::Yarr::YarrGenerator::compile): |
| * yarr/YarrJIT.h: |
| (JSC::Yarr::YarrCodeBlock::set8BitCode): |
| (JSC::Yarr::YarrCodeBlock::set16BitCode): |
| (JSC::Yarr::YarrCodeBlock::set8BitCodeMatchOnly): |
| (JSC::Yarr::YarrCodeBlock::set16BitCodeMatchOnly): |
| (JSC::Yarr::YarrCodeBlock::execute): |
| (JSC::Yarr::YarrCodeBlock::clear): |
| |
| 2018-04-17 Commit Queue <commit-queue@webkit.org> |
| |
| Unreviewed, rolling out r230697, r230720, and r230724. |
| https://bugs.webkit.org/show_bug.cgi?id=184717 |
| |
| These caused multiple failures on the Test262 testers. |
| (Requested by mlewis13 on #webkit). |
| |
| Reverted changesets: |
| |
| "[WebAssembly][Modules] Prototype wasm import" |
| https://bugs.webkit.org/show_bug.cgi?id=184600 |
| https://trac.webkit.org/changeset/230697 |
| |
| "[WebAssembly][Modules] Implement function import from wasm |
| modules" |
| https://bugs.webkit.org/show_bug.cgi?id=184689 |
| https://trac.webkit.org/changeset/230720 |
| |
| "[JSC] Rename runWebAssembly to runWebAssemblySuite" |
| https://bugs.webkit.org/show_bug.cgi?id=184703 |
| https://trac.webkit.org/changeset/230724 |
| |
| 2018-04-17 JF Bastien <jfbastien@apple.com> |
| |
| A put is not an ExistingProperty put when we transition a structure because of an attributes change |
| https://bugs.webkit.org/show_bug.cgi?id=184706 |
| <rdar://problem/38871451> |
| |
| Reviewed by Saam Barati. |
| |
| When putting a property on a structure and the slot is a different |
| type, the slot can't be said to have already been existing. |
| |
| * runtime/JSObjectInlines.h: |
| (JSC::JSObject::putDirectInternal): |
| |
| 2018-04-17 Filip Pizlo <fpizlo@apple.com> |
| |
| JSGenericTypedArrayView<>::visitChildren has a race condition reading m_mode and m_vector |
| https://bugs.webkit.org/show_bug.cgi?id=184705 |
| |
| Reviewed by Michael Saboff. |
| |
| My old multisocket Mac Pro is amazing at catching race conditions in the GC. Earlier today |
| while testing an unrelated patch, a concurrent GC thread crashed inside |
| JSGenericTypedArrayView<>::visitChildren() calling markAuxiliary(). I'm pretty sure it's |
| because a typed array became wasteful concurrently to the GC. So, visitChildren() read one |
| mode and another vector. |
| |
| The fix is to lock inside visitChildren and anyone who changes those fields. |
| |
| I'm not even going to try to write a test. I think it's super lucky that my Mac Pro caught |
| this. |
| |
| * runtime/JSArrayBufferView.cpp: |
| (JSC::JSArrayBufferView::neuter): |
| * runtime/JSGenericTypedArrayViewInlines.h: |
| (JSC::JSGenericTypedArrayView<Adaptor>::visitChildren): |
| (JSC::JSGenericTypedArrayView<Adaptor>::slowDownAndWasteMemory): |
| |
| 2018-04-16 Filip Pizlo <fpizlo@apple.com> |
| |
| PutStackSinkingPhase should know that KillStack means ConflictingFlush |
| https://bugs.webkit.org/show_bug.cgi?id=184672 |
| |
| Reviewed by Michael Saboff. |
| |
| We've had a long history of KillStack and PutStackSinkingPhase having problems. We kept changing the meaning of |
| KillStack, and at some point we removed reasoning about KillStack from PutStackSinkingPhase. I tried doing some |
| archeology - but I'm still not sure why that phase ignores KillStack entirely. Maybe it's an oversight or maybe it's |
| intentional - I don't know. |
| |
| Whatever the history, it's clear from the attached test case that ignoring KillStack is not correct. The outcome of |
| doing so is that we will sometimes sink a PutStack below a KillStack. That's wrong because then, OSR exit will use |
| the value from the PutStack instead of using the value from the MovHint that is associated with the KillStack. So, |
| KillStack must be seen as a special kind of clobber of the stack slot. OSRAvailabiity uses ConflictingFlush. I think |
| that's correct here, too. If we used DeadFlush and that was merged with another control flow path that had a |
| specific flush format, then we would think that we could sink the flush from that path. That's not right, since that |
| could still lead to sinking a PutStack past the KillStack in the sense that a PutStack will appear after the |
| KillStack along one path through the CFG. Also, the definition of DeadFlush and ConflictingFlush in the comment |
| inside PutStackSinkingPhase seems to suggest that KillStack is a ConflictingFlush, since DeadFlush means that we |
| have done some PutStack and their values are still valid. KillStack is not a PutStack and it means that previous |
| values are not valid. The definition of ConflictingFlush is that "we know, via forward flow, that there isn't any |
| value in the given local that anyone should have been relying on" - which exactly matches KillStack's definition. |
| |
| This also means that we cannot eliminate arguments allocations that are live over KillStacks, since if we eliminated |
| them then we would have a GetStack after a KillStack. One easy way to fix this is to say that KillStack writes to |
| its stack slot for the purpose of clobberize. |
| |
| * dfg/DFGClobberize.h: KillStack "writes" to its stack slot. |
| * dfg/DFGPutStackSinkingPhase.cpp: Fix the bug. |
| * ftl/FTLLowerDFGToB3.cpp: Add better assertion failure. |
| (JSC::FTL::DFG::LowerDFGToB3::buildExitArguments): |
| |
| 2018-04-17 Filip Pizlo <fpizlo@apple.com> |
| |
| JSWebAssemblyCodeBlock should be in an IsoSubspace |
| https://bugs.webkit.org/show_bug.cgi?id=184704 |
| |
| Reviewed by Mark Lam. |
| |
| Previously it was in a CompleteSubspace, which is pretty good, but also quite wasteful. |
| CompleteSubspace means about 4KB of data to track the size-allocator mapping. IsoSubspace |
| shortcircuits this. Also, IsoSubspace uses the iso allocator, so it provides stronger UAF |
| protection. |
| |
| * runtime/VM.cpp: |
| (JSC::VM::VM): |
| * runtime/VM.h: |
| * wasm/js/JSWebAssemblyCodeBlock.h: |
| |
| 2018-04-17 Jer Noble <jer.noble@apple.com> |
| |
| Only enable useSeparatedWXHeap on ARM64. |
| https://bugs.webkit.org/show_bug.cgi?id=184697 |
| |
| Reviewed by Saam Barati. |
| |
| * runtime/Options.cpp: |
| (JSC::recomputeDependentOptions): |
| |
| 2018-04-17 Yusuke Suzuki <utatane.tea@gmail.com> |
| |
| [WebAssembly][Modules] Implement function import from wasm modules |
| https://bugs.webkit.org/show_bug.cgi?id=184689 |
| |
| Reviewed by JF Bastien. |
| |
| This patch implements function import from wasm modules. We move function importing part |
| from JSWebAssemblyInstance's creation function to WebAssemblyModuleRecord::link. This |
| is because linking these functions requires that all the dependent modules are created. |
| While we want to move all the linking functionality from JSWebAssemblyInstance to |
| WebAssemblyModuleRecord::link, we do not that in this patch. In this patch, we move only |
| function importing part because efficient compilation of WebAssembly needs to know |
| the type of WebAssemblyMemory (signaling or bound checking). This needs to know imported |
| or attached WebAssembly memory object. So we cannot defer this linking to |
| WebAssemblyModuleRecord::link now. |
| |
| The largest difference from JS module linking is that WebAssembly module linking links |
| function from the module by snapshotting. When you have a cyclic module graph like this, |
| |
| -> JS1 (export "fun") -> Wasm1 (import "fun from JS1) -+ |
| ^ | |
| +--------------------------------------------------+ |
| |
| we fail to link this since "fun" is not instantiated when Wasm1 is first linked. This behavior |
| is described in [1], and tested in this patch. |
| |
| [1]: https://github.com/WebAssembly/esm-integration/tree/master/proposals/esm-integration#js---wasm-cycle-where-js-is-higher-in-the-module-graph |
| |
| * JavaScriptCore.xcodeproj/project.pbxproj: |
| * jsc.cpp: |
| (functionDollarAgentStart): |
| (checkException): |
| (runWithOptions): |
| Small fixes for wasm module loading. |
| |
| * parser/NodesAnalyzeModule.cpp: |
| (JSC::ImportDeclarationNode::analyzeModule): |
| * runtime/AbstractModuleRecord.cpp: |
| (JSC::AbstractModuleRecord::resolveImport): |
| (JSC::AbstractModuleRecord::link): |
| * runtime/AbstractModuleRecord.h: |
| (JSC::AbstractModuleRecord::moduleEnvironmentMayBeNull): |
| (JSC::AbstractModuleRecord::ImportEntry::isNamespace const): Deleted. |
| Now, wasm modules can have import which is named "*". So this function does not work. |
| Since wasm modules never have namespace importing, we check this in JS's module analyzer. |
| |
| * runtime/JSModuleEnvironment.cpp: |
| (JSC::JSModuleEnvironment::getOwnNonIndexPropertyNames): |
| * runtime/JSModuleRecord.cpp: |
| (JSC::JSModuleRecord::instantiateDeclarations): |
| * wasm/WasmCreationMode.h: Added. |
| * wasm/js/JSWebAssemblyInstance.cpp: |
| (JSC::JSWebAssemblyInstance::finalizeCreation): |
| (JSC::JSWebAssemblyInstance::create): |
| * wasm/js/JSWebAssemblyInstance.h: |
| * wasm/js/WebAssemblyInstanceConstructor.cpp: |
| (JSC::constructJSWebAssemblyInstance): |
| * wasm/js/WebAssemblyModuleRecord.cpp: |
| (JSC::WebAssemblyModuleRecord::link): |
| * wasm/js/WebAssemblyModuleRecord.h: |
| * wasm/js/WebAssemblyPrototype.cpp: |
| (JSC::resolve): |
| (JSC::instantiate): |
| (JSC::compileAndInstantiate): |
| (JSC::WebAssemblyPrototype::instantiate): |
| (JSC::webAssemblyInstantiateFunc): |
| |
| 2018-04-17 Dominik Infuehr <dinfuehr@igalia.com> |
| |
| Implement setupArgumentsImpl for ARM and MIPS |
| https://bugs.webkit.org/show_bug.cgi?id=183786 |
| |
| Reviewed by Yusuke Suzuki. |
| |
| Implement setupArgumentsImpl for ARM (hardfp and softfp) and MIPS calling convention. Added |
| numCrossSources and extraGPRArgs to ArgCollection to keep track of extra |
| registers used for 64-bit values on 32-bit architectures. numCrossSources |
| keeps track of assignments from FPR to GPR registers as happens e.g. on MIPS. |
| |
| * assembler/MacroAssemblerARMv7.h: |
| (JSC::MacroAssemblerARMv7::moveDouble): |
| * assembler/MacroAssemblerMIPS.h: |
| (JSC::MacroAssemblerMIPS::moveDouble): |
| * jit/CCallHelpers.h: |
| (JSC::CCallHelpers::setupStubCrossArgs): |
| (JSC::CCallHelpers::ArgCollection::ArgCollection): |
| (JSC::CCallHelpers::ArgCollection::pushRegArg): |
| (JSC::CCallHelpers::ArgCollection::pushExtraRegArg): |
| (JSC::CCallHelpers::ArgCollection::addGPRArg): |
| (JSC::CCallHelpers::ArgCollection::addGPRExtraArg): |
| (JSC::CCallHelpers::ArgCollection::addStackArg): |
| (JSC::CCallHelpers::ArgCollection::addPoke): |
| (JSC::CCallHelpers::ArgCollection::argCount): |
| (JSC::CCallHelpers::calculatePokeOffset): |
| (JSC::CCallHelpers::pokeForArgument): |
| (JSC::CCallHelpers::stackAligned): |
| (JSC::CCallHelpers::marshallArgumentRegister): |
| (JSC::CCallHelpers::setupArgumentsImpl): |
| (JSC::CCallHelpers::pokeArgumentsAligned): |
| (JSC::CCallHelpers::std::is_integral<CURRENT_ARGUMENT_TYPE>::value): |
| (JSC::CCallHelpers::std::is_pointer<CURRENT_ARGUMENT_TYPE>::value): |
| (JSC::CCallHelpers::setupArguments): |
| * jit/FPRInfo.h: |
| (JSC::FPRInfo::toArgumentRegister): |
| |
| 2018-04-17 Saam Barati <sbarati@apple.com> |
| |
| Add system trace points for process launch and for initializeWebProcess |
| https://bugs.webkit.org/show_bug.cgi?id=184669 |
| |
| Reviewed by Simon Fraser. |
| |
| * runtime/VMEntryScope.cpp: |
| (JSC::VMEntryScope::VMEntryScope): |
| (JSC::VMEntryScope::~VMEntryScope): |
| |
| 2018-04-17 Jer Noble <jer.noble@apple.com> |
| |
| Fix duplicate symbol errors when building JavaScriptCore with non-empty WK_ALTERNATE_WEBKIT_SDK_PATH |
| https://bugs.webkit.org/show_bug.cgi?id=184602 |
| |
| Reviewed by Beth Dakin. |
| |
| * JavaScriptCore.xcodeproj/project.pbxproj: |
| |
| 2018-04-17 Carlos Garcia Campos <cgarcia@igalia.com> |
| |
| [GLIB] Add API to clear JSCContext uncaught exception |
| https://bugs.webkit.org/show_bug.cgi?id=184685 |
| |
| Reviewed by Žan Doberšek. |
| |
| Add jsc_context_clear_exception() to clear any possible uncaught exception in a JSCContext. |
| |
| * API/glib/JSCContext.cpp: |
| (jsc_context_clear_exception): |
| * API/glib/JSCContext.h: |
| * API/glib/docs/jsc-glib-4.0-sections.txt: |
| |
| 2018-04-17 Carlos Garcia Campos <cgarcia@igalia.com> |
| |
| [GLIB] Add API to query, delete and enumerate properties |
| https://bugs.webkit.org/show_bug.cgi?id=184647 |
| |
| Reviewed by Michael Catanzaro. |
| |
| Add jsc_value_object_has_property(), jsc_value_object_delete_property() and jsc_value_object_enumerate_properties(). |
| |
| * API/glib/JSCValue.cpp: |
| (jsc_value_object_has_property): |
| (jsc_value_object_delete_property): |
| (jsc_value_object_enumerate_properties): |
| * API/glib/JSCValue.h: |
| * API/glib/docs/jsc-glib-4.0-sections.txt: |
| |
| 2018-04-16 Yusuke Suzuki <utatane.tea@gmail.com> |
| |
| [WebAssembly][Modules] Prototype wasm import |
| https://bugs.webkit.org/show_bug.cgi?id=184600 |
| |
| Reviewed by JF Bastien. |
| |
| This patch is an initial attempt to implement Wasm loading in module pipeline. |
| Currently, |
| |
| 1. We only support Wasm loading in the JSC shell. Once loading mechanism is specified |
| in whatwg HTML, we should integrate this into WebCore. |
| |
| 2. We only support exporting values from Wasm. Wasm module cannot import anything from |
| the other modules now. |
| |
| When loading a file, JSC shell checks wasm magic. If the wasm magic is found, JSC shell |
| loads the file with WebAssemblySourceProvider. It is wrapped into JSSourceCode and |
| module loader pipeline just handles it as the same to JS. When parsing a module, we |
| checks the type of JSSourceCode. If the source code is Wasm source code, we create a |
| WebAssemblyModuleRecord instead of JSModuleRecord. Our module pipeline handles |
| AbstractModuleRecord and Wasm module is instantiated, linked, and evaluated. |
| |
| * builtins/ModuleLoaderPrototype.js: |
| (globalPrivate.newRegistryEntry): |
| (requestInstantiate): |
| (link): |
| * jsc.cpp: |
| (convertShebangToJSComment): |
| (fillBufferWithContentsOfFile): |
| (fetchModuleFromLocalFileSystem): |
| (GlobalObject::moduleLoaderFetch): |
| * parser/SourceProvider.h: |
| (JSC::WebAssemblySourceProvider::create): |
| (JSC::WebAssemblySourceProvider::WebAssemblySourceProvider): |
| * runtime/AbstractModuleRecord.cpp: |
| (JSC::AbstractModuleRecord::hostResolveImportedModule): |
| (JSC::AbstractModuleRecord::link): |
| (JSC::AbstractModuleRecord::evaluate): |
| (JSC::identifierToJSValue): Deleted. |
| * runtime/AbstractModuleRecord.h: |
| * runtime/JSModuleLoader.cpp: |
| (JSC::JSModuleLoader::evaluate): |
| * runtime/JSModuleRecord.cpp: |
| (JSC::JSModuleRecord::link): |
| (JSC::JSModuleRecord::instantiateDeclarations): |
| * runtime/JSModuleRecord.h: |
| * runtime/ModuleLoaderPrototype.cpp: |
| (JSC::moduleLoaderPrototypeParseModule): |
| (JSC::moduleLoaderPrototypeRequestedModules): |
| (JSC::moduleLoaderPrototypeModuleDeclarationInstantiation): |
| * wasm/js/JSWebAssemblyHelpers.h: |
| (JSC::getWasmBufferFromValue): |
| (JSC::createSourceBufferFromValue): |
| * wasm/js/JSWebAssemblyInstance.cpp: |
| (JSC::JSWebAssemblyInstance::finalizeCreation): |
| (JSC::JSWebAssemblyInstance::createPrivateModuleKey): |
| (JSC::JSWebAssemblyInstance::create): |
| * wasm/js/JSWebAssemblyInstance.h: |
| * wasm/js/WebAssemblyInstanceConstructor.cpp: |
| (JSC::constructJSWebAssemblyInstance): |
| * wasm/js/WebAssemblyModuleRecord.cpp: |
| (JSC::WebAssemblyModuleRecord::prepareLink): |
| (JSC::WebAssemblyModuleRecord::link): |
| * wasm/js/WebAssemblyModuleRecord.h: |
| * wasm/js/WebAssemblyPrototype.cpp: |
| (JSC::resolve): |
| (JSC::instantiate): |
| (JSC::compileAndInstantiate): |
| (JSC::WebAssemblyPrototype::instantiate): |
| (JSC::webAssemblyInstantiateFunc): |
| (JSC::webAssemblyValidateFunc): |
| * wasm/js/WebAssemblyPrototype.h: |
| |
| 2018-04-14 Filip Pizlo <fpizlo@apple.com> |
| |
| Function.prototype.caller shouldn't return generator bodies |
| https://bugs.webkit.org/show_bug.cgi?id=184630 |
| |
| Reviewed by Yusuke Suzuki. |
| |
| Function.prototype.caller no longer returns generator bodies. Those are meant to be |
| private. |
| |
| Also added some builtin debugging tools so that it's easier to do the investigation that I |
| did. |
| |
| * builtins/BuiltinNames.h: |
| * runtime/JSFunction.cpp: |
| (JSC::JSFunction::callerGetter): |
| * runtime/JSGlobalObject.cpp: |
| (JSC::JSGlobalObject::init): |
| * runtime/JSGlobalObjectFunctions.cpp: |
| (JSC::globalFuncBuiltinDescribe): |
| * runtime/JSGlobalObjectFunctions.h: |
| |
| 2018-04-13 Yusuke Suzuki <utatane.tea@gmail.com> |
| |
| [DFG] Remove duplicate 32bit ProfileType implementation |
| https://bugs.webkit.org/show_bug.cgi?id=184536 |
| |
| Reviewed by Saam Barati. |
| |
| This patch removes duplicate 32bit ProfileType implementation by unifying 32/64 implementations. |
| |
| * dfg/DFGSpeculativeJIT.cpp: |
| (JSC::DFG::SpeculativeJIT::compileProfileType): |
| * dfg/DFGSpeculativeJIT.h: |
| * dfg/DFGSpeculativeJIT32_64.cpp: |
| (JSC::DFG::SpeculativeJIT::compile): |
| * dfg/DFGSpeculativeJIT64.cpp: |
| (JSC::DFG::SpeculativeJIT::compile): |
| * jit/AssemblyHelpers.h: |
| (JSC::AssemblyHelpers::branchIfUndefined): |
| (JSC::AssemblyHelpers::branchIfNull): |
| |
| 2018-04-12 Mark Lam <mark.lam@apple.com> |
| |
| Consolidate some PtrTags. |
| https://bugs.webkit.org/show_bug.cgi?id=184552 |
| <rdar://problem/39389404> |
| |
| Reviewed by Filip Pizlo. |
| |
| Consolidate CodeEntryPtrTag and CodeEntryWithArityCheckPtrTag into CodePtrTag. |
| Consolidate NearCallPtrTag and NearJumpPtrTag into NearCodePtrTag. |
| |
| * assembler/AbstractMacroAssembler.h: |
| (JSC::AbstractMacroAssembler::repatchNearCall): |
| * assembler/MacroAssemblerARM.h: |
| (JSC::MacroAssemblerARM::readCallTarget): |
| * assembler/MacroAssemblerARMv7.h: |
| (JSC::MacroAssemblerARMv7::readCallTarget): |
| * assembler/MacroAssemblerMIPS.h: |
| (JSC::MacroAssemblerMIPS::readCallTarget): |
| * assembler/MacroAssemblerX86.h: |
| (JSC::MacroAssemblerX86::readCallTarget): |
| * assembler/MacroAssemblerX86_64.h: |
| (JSC::MacroAssemblerX86_64::readCallTarget): |
| * bytecode/AccessCase.cpp: |
| (JSC::AccessCase::generateImpl): |
| * bytecode/InlineAccess.cpp: |
| (JSC::InlineAccess::rewireStubAsJump): |
| * bytecode/PolymorphicAccess.cpp: |
| (JSC::PolymorphicAccess::regenerate): |
| * dfg/DFGJITCompiler.cpp: |
| (JSC::DFG::JITCompiler::linkOSRExits): |
| (JSC::DFG::JITCompiler::link): |
| (JSC::DFG::JITCompiler::compileFunction): |
| * dfg/DFGJITFinalizer.cpp: |
| (JSC::DFG::JITFinalizer::finalize): |
| (JSC::DFG::JITFinalizer::finalizeFunction): |
| * dfg/DFGOSREntry.cpp: |
| (JSC::DFG::prepareOSREntry): |
| * dfg/DFGOSRExit.cpp: |
| (JSC::DFG::OSRExit::executeOSRExit): |
| (JSC::DFG::adjustAndJumpToTarget): |
| (JSC::DFG::OSRExit::compileOSRExit): |
| * dfg/DFGOSRExitCompilerCommon.cpp: |
| (JSC::DFG::adjustAndJumpToTarget): |
| * dfg/DFGOperations.cpp: |
| * ftl/FTLJITCode.cpp: |
| (JSC::FTL::JITCode::executableAddressAtOffset): |
| * ftl/FTLJITFinalizer.cpp: |
| (JSC::FTL::JITFinalizer::finalizeCommon): |
| * ftl/FTLLazySlowPath.cpp: |
| (JSC::FTL::LazySlowPath::generate): |
| * ftl/FTLLink.cpp: |
| (JSC::FTL::link): |
| * ftl/FTLLowerDFGToB3.cpp: |
| (JSC::FTL::DFG::LowerDFGToB3::compileCallOrConstruct): |
| (JSC::FTL::DFG::LowerDFGToB3::compileDirectCallOrConstruct): |
| (JSC::FTL::DFG::LowerDFGToB3::compileTailCall): |
| (JSC::FTL::DFG::LowerDFGToB3::compileCallOrConstructVarargsSpread): |
| (JSC::FTL::DFG::LowerDFGToB3::compileCallOrConstructVarargs): |
| (JSC::FTL::DFG::LowerDFGToB3::lazySlowPath): |
| * ftl/FTLOSRExitCompiler.cpp: |
| (JSC::FTL::compileFTLOSRExit): |
| * ftl/FTLOSRExitHandle.cpp: |
| (JSC::FTL::OSRExitHandle::emitExitThunk): |
| * jit/AssemblyHelpers.cpp: |
| (JSC::AssemblyHelpers::emitDumbVirtualCall): |
| * jit/JIT.cpp: |
| (JSC::JIT::compileWithoutLinking): |
| (JSC::JIT::link): |
| * jit/JITCall.cpp: |
| (JSC::JIT::compileOpCallSlowCase): |
| * jit/JITCode.cpp: |
| (JSC::JITCodeWithCodeRef::executableAddressAtOffset): |
| (JSC::NativeJITCode::addressForCall): |
| * jit/JITInlines.h: |
| (JSC::JIT::emitNakedCall): |
| (JSC::JIT::emitNakedTailCall): |
| * jit/JITMathIC.h: |
| (JSC::isProfileEmpty): |
| * jit/JITOpcodes.cpp: |
| (JSC::JIT::privateCompileHasIndexedProperty): |
| * jit/JITOperations.cpp: |
| * jit/JITPropertyAccess.cpp: |
| (JSC::JIT::stringGetByValStubGenerator): |
| (JSC::JIT::privateCompileGetByVal): |
| (JSC::JIT::privateCompileGetByValWithCachedId): |
| (JSC::JIT::privateCompilePutByVal): |
| (JSC::JIT::privateCompilePutByValWithCachedId): |
| * jit/JITThunks.cpp: |
| (JSC::JITThunks::hostFunctionStub): |
| * jit/Repatch.cpp: |
| (JSC::linkSlowFor): |
| (JSC::linkFor): |
| (JSC::linkPolymorphicCall): |
| * jit/SpecializedThunkJIT.h: |
| (JSC::SpecializedThunkJIT::finalize): |
| * jit/ThunkGenerators.cpp: |
| (JSC::virtualThunkFor): |
| (JSC::nativeForGenerator): |
| (JSC::boundThisNoArgsFunctionCallGenerator): |
| * llint/LLIntData.cpp: |
| (JSC::LLInt::initialize): |
| * llint/LLIntEntrypoint.cpp: |
| (JSC::LLInt::setEvalEntrypoint): |
| (JSC::LLInt::setProgramEntrypoint): |
| (JSC::LLInt::setModuleProgramEntrypoint): |
| * llint/LLIntSlowPaths.cpp: |
| (JSC::LLInt::LLINT_SLOW_PATH_DECL): |
| (JSC::LLInt::setUpCall): |
| * llint/LLIntThunks.cpp: |
| (JSC::LLInt::generateThunkWithJumpTo): |
| (JSC::LLInt::functionForCallEntryThunkGenerator): |
| (JSC::LLInt::functionForConstructEntryThunkGenerator): |
| (JSC::LLInt::functionForCallArityCheckThunkGenerator): |
| (JSC::LLInt::functionForConstructArityCheckThunkGenerator): |
| (JSC::LLInt::evalEntryThunkGenerator): |
| (JSC::LLInt::programEntryThunkGenerator): |
| (JSC::LLInt::moduleProgramEntryThunkGenerator): |
| * llint/LowLevelInterpreter.asm: |
| * llint/LowLevelInterpreter64.asm: |
| * runtime/NativeExecutable.cpp: |
| (JSC::NativeExecutable::finishCreation): |
| * runtime/NativeFunction.h: |
| (JSC::TaggedNativeFunction::TaggedNativeFunction): |
| (JSC::TaggedNativeFunction::operator NativeFunction): |
| * runtime/PtrTag.h: |
| * wasm/WasmBBQPlan.cpp: |
| (JSC::Wasm::BBQPlan::complete): |
| * wasm/WasmOMGPlan.cpp: |
| (JSC::Wasm::OMGPlan::work): |
| * wasm/WasmThunks.cpp: |
| (JSC::Wasm::throwExceptionFromWasmThunkGenerator): |
| (JSC::Wasm::throwStackOverflowFromWasmThunkGenerator): |
| (JSC::Wasm::triggerOMGTierUpThunkGenerator): |
| * wasm/js/WasmToJS.cpp: |
| (JSC::Wasm::wasmToJS): |
| * wasm/js/WebAssemblyFunction.h: |
| * yarr/YarrJIT.cpp: |
| (JSC::Yarr::YarrGenerator::compile): |
| |
| 2018-04-12 Michael Catanzaro <mcatanzaro@igalia.com> |
| |
| [WPE] Move libWPEWebInspectorResources.so to pkglibdir |
| https://bugs.webkit.org/show_bug.cgi?id=184379 |
| |
| Reviewed by Žan Doberšek. |
| |
| Load the module from the new location. |
| |
| * PlatformWPE.cmake: |
| * inspector/remote/glib/RemoteInspectorUtils.cpp: |
| (Inspector::backendCommands): |
| |
| 2018-04-12 Yusuke Suzuki <utatane.tea@gmail.com> |
| |
| [DFG] Remove compileBigIntEquality in DFG 32bit |
| https://bugs.webkit.org/show_bug.cgi?id=184535 |
| |
| Reviewed by Saam Barati. |
| |
| We can have the unified implementation for compileBigIntEquality. |
| |
| * dfg/DFGSpeculativeJIT.cpp: |
| (JSC::DFG::SpeculativeJIT::compileBigIntEquality): |
| * dfg/DFGSpeculativeJIT32_64.cpp: |
| (JSC::DFG::SpeculativeJIT::compileBigIntEquality): Deleted. |
| * dfg/DFGSpeculativeJIT64.cpp: |
| (JSC::DFG::SpeculativeJIT::compileBigIntEquality): Deleted. |
| |
| 2018-04-12 Michael Catanzaro <mcatanzaro@igalia.com> |
| |
| [WPE] Improve include hierarchy |
| https://bugs.webkit.org/show_bug.cgi?id=184376 |
| |
| Reviewed by Žan Doberšek. |
| |
| Install JSC headers under /usr/include/wpe-webkit-0.1/jsc instead of |
| /usr/include/wpe-0.1/WPE/jsc. |
| |
| * PlatformWPE.cmake: |
| |
| 2018-04-11 Carlos Garcia Campos <cgarcia@igalia.com> |
| |
| [GLIB] Handle strings containing null characters |
| https://bugs.webkit.org/show_bug.cgi?id=184450 |
| |
| Reviewed by Michael Catanzaro. |
| |
| We should be able to evaluate scripts containing null characters and to handle strings that contains them |
| too. In JavaScript strings are not null-terminated, they can contain null characters. This patch adds a length |
| parameter to jsc_context_valuate() to pass the script length (or -1 if it's null terminated), and new functions |
| jsc_value_new_string_from_bytes() and jsc_value_to_string_as_bytes() using GBytes to store strings that might |
| contain null characters. |
| |
| * API/OpaqueJSString.cpp: |
| (OpaqueJSString::create): Add a create constructor that takes the String. |
| * API/OpaqueJSString.h: |
| (OpaqueJSString::OpaqueJSString): Add a constructor that takes the String. |
| * API/glib/JSCContext.cpp: |
| (jsc_context_evaluate): Add length parameter. |
| (jsc_context_evaluate_with_source_uri): Ditto. |
| * API/glib/JSCContext.h: |
| * API/glib/JSCValue.cpp: |
| (jsc_value_new_string_from_bytes): |
| (jsc_value_to_string): |
| (jsc_value_to_string_as_bytes): |
| (jsc_value_object_is_instance_of): Pass length to evaluate. |
| * API/glib/JSCValue.h: |
| * API/glib/docs/jsc-glib-4.0-sections.txt: |
| |
| 2018-04-11 Yusuke Suzuki <utatane.tea@gmail.com> |
| |
| [JSC] Add CCallHelpers::CellValue to wrap JSCell GPR to convert it to EncodedJSValue |
| https://bugs.webkit.org/show_bug.cgi?id=184500 |
| |
| Reviewed by Mark Lam. |
| |
| Instead of passing JSValue::JSCellTag to callOperation meta-program to convert |
| JSCell GPR to EncodedJSValue in 32bit code, we add CallHelpers::CellValue. |
| It is a wrapper for GPRReg, like TrustedImmPtr for pointer value. When poking |
| CellValue, 32bit code emits JSValue::CellTag automatically. In 64bit, we just |
| poke held GPR. The benefit from this CellValue is that we can use the same code |
| for 32bit and 64bit. This patch removes several ifdefs. |
| |
| * bytecode/AccessCase.cpp: |
| (JSC::AccessCase::generateImpl): |
| * dfg/DFGSpeculativeJIT.cpp: |
| (JSC::DFG::SpeculativeJIT::compileCallDOMGetter): |
| (JSC::DFG::SpeculativeJIT::compileGetDirectPname): |
| (JSC::DFG::SpeculativeJIT::cachedPutById): |
| * dfg/DFGSpeculativeJIT32_64.cpp: |
| (JSC::DFG::SpeculativeJIT::cachedGetById): |
| (JSC::DFG::SpeculativeJIT::cachedGetByIdWithThis): |
| * jit/CCallHelpers.h: |
| (JSC::CCallHelpers::CellValue::CellValue): |
| (JSC::CCallHelpers::CellValue::gpr const): |
| (JSC::CCallHelpers::setupArgumentsImpl): |
| |
| 2018-04-11 Mark Lam <mark.lam@apple.com> |
| |
| [Build fix] Replace CompactJITCodeMap with JITCodeMap. |
| https://bugs.webkit.org/show_bug.cgi?id=184512 |
| <rdar://problem/35391728> |
| |
| Not reviewed. |
| |
| * bytecode/CodeBlock.h: |
| * jit/JITCodeMap.h: |
| |
| 2018-04-11 Mark Lam <mark.lam@apple.com> |
| |
| Replace CompactJITCodeMap with JITCodeMap. |
| https://bugs.webkit.org/show_bug.cgi?id=184512 |
| <rdar://problem/35391728> |
| |
| Reviewed by Filip Pizlo. |
| |
| * CMakeLists.txt: |
| * JavaScriptCore.xcodeproj/project.pbxproj: |
| * bytecode/CodeBlock.h: |
| (JSC::CodeBlock::setJITCodeMap): |
| (JSC::CodeBlock::jitCodeMap const): |
| (JSC::CodeBlock::jitCodeMap): Deleted. |
| * dfg/DFGOSRExit.cpp: |
| (JSC::DFG::OSRExit::executeOSRExit): |
| * dfg/DFGOSRExitCompilerCommon.cpp: |
| (JSC::DFG::adjustAndJumpToTarget): |
| * jit/AssemblyHelpers.cpp: |
| (JSC::AssemblyHelpers::decodedCodeMapFor): Deleted. |
| * jit/AssemblyHelpers.h: |
| * jit/CompactJITCodeMap.h: Removed. |
| * jit/JIT.cpp: |
| (JSC::JIT::link): |
| * jit/JITCodeMap.h: Added. |
| (JSC::JITCodeMap::Entry::Entry): |
| (JSC::JITCodeMap::Entry::bytecodeIndex const): |
| (JSC::JITCodeMap::Entry::codeLocation): |
| (JSC::JITCodeMap::append): |
| (JSC::JITCodeMap::finish): |
| (JSC::JITCodeMap::find const): |
| (JSC::JITCodeMap::operator bool const): |
| * llint/LLIntSlowPaths.cpp: |
| (JSC::LLInt::LLINT_SLOW_PATH_DECL): |
| |
| 2018-04-11 Yusuke Suzuki <utatane.tea@gmail.com> |
| |
| [DFG] Remove CompareSlowPathGenerator |
| https://bugs.webkit.org/show_bug.cgi?id=184492 |
| |
| Reviewed by Mark Lam. |
| |
| Now CompareSlowPathGenerator is just calling a specified function. |
| This can be altered with slowPathCall. This patch removes CompareSlowPathGenerator. |
| |
| We also remove some of unnecessary USE(JSVALUE32_64) / USE(JSVALUE64) ifdefs by |
| introducing a new constructor for GPRTemporary. |
| |
| * JavaScriptCore.xcodeproj/project.pbxproj: |
| * dfg/DFGCompareSlowPathGenerator.h: Removed. |
| * dfg/DFGSpeculativeJIT.cpp: |
| (JSC::DFG::GPRTemporary::GPRTemporary): |
| (JSC::DFG::SpeculativeJIT::compileIsCellWithType): |
| (JSC::DFG::SpeculativeJIT::compileIsTypedArrayView): |
| (JSC::DFG::SpeculativeJIT::compileToObjectOrCallObjectConstructor): |
| (JSC::DFG::SpeculativeJIT::compileIsObject): |
| (JSC::DFG::SpeculativeJIT::nonSpeculativeNonPeepholeCompare): |
| (JSC::DFG::SpeculativeJIT::nonSpeculativePeepholeBranch): |
| * dfg/DFGSpeculativeJIT.h: |
| (JSC::DFG::GPRTemporary::GPRTemporary): |
| * dfg/DFGSpeculativeJIT64.cpp: |
| (JSC::DFG::SpeculativeJIT::nonSpeculativeNonPeepholeStrictEq): |
| |
| 2018-04-11 Yusuke Suzuki <utatane.tea@gmail.com> |
| |
| Unreviewed, build fix for 32bit |
| https://bugs.webkit.org/show_bug.cgi?id=184236 |
| |
| * dfg/DFGSpeculativeJIT.cpp: |
| (JSC::DFG::SpeculativeJIT::compileGetDirectPname): |
| |
| 2018-04-11 Yusuke Suzuki <utatane.tea@gmail.com> |
| |
| [DFG] Remove duplicate 32bit code more |
| https://bugs.webkit.org/show_bug.cgi?id=184236 |
| |
| Reviewed by Mark Lam. |
| |
| Remove duplicate 32bit code more aggressively part 2. |
| |
| * JavaScriptCore.xcodeproj/project.pbxproj: |
| * dfg/DFGCompareSlowPathGenerator.h: Added. |
| (JSC::DFG::CompareSlowPathGenerator::CompareSlowPathGenerator): |
| Drop boxing part. Use unblessedBooleanResult in DFGSpeculativeJIT side instead. |
| |
| * dfg/DFGOperations.cpp: |
| * dfg/DFGOperations.h: |
| * dfg/DFGSpeculativeJIT.cpp: |
| (JSC::DFG::SpeculativeJIT::compileOverridesHasInstance): |
| (JSC::DFG::SpeculativeJIT::compileLoadVarargs): |
| (JSC::DFG::SpeculativeJIT::compileIsObject): |
| (JSC::DFG::SpeculativeJIT::compileCheckNotEmpty): |
| (JSC::DFG::SpeculativeJIT::compilePutByIdFlush): |
| (JSC::DFG::SpeculativeJIT::compilePutById): |
| (JSC::DFG::SpeculativeJIT::compilePutByIdDirect): |
| (JSC::DFG::SpeculativeJIT::compileNewArrayWithSize): |
| (JSC::DFG::SpeculativeJIT::compileMiscStrictEq): |
| (JSC::DFG::SpeculativeJIT::emitInitializeButterfly): |
| (JSC::DFG::SpeculativeJIT::compileAllocateNewArrayWithSize): |
| (JSC::DFG::SpeculativeJIT::compileHasIndexedProperty): |
| (JSC::DFG::SpeculativeJIT::compileGetDirectPname): |
| (JSC::DFG::SpeculativeJIT::compileExtractCatchLocal): |
| (JSC::DFG::SpeculativeJIT::cachedPutById): |
| (JSC::DFG::SpeculativeJIT::nonSpeculativeNonPeepholeCompare): |
| (JSC::DFG::SpeculativeJIT::nonSpeculativePeepholeBranch): |
| (JSC::DFG::SpeculativeJIT::nonSpeculativeCompare): Deleted. |
| * dfg/DFGSpeculativeJIT.h: |
| (JSC::DFG::SpeculativeJIT::selectScratchGPR): Deleted. |
| * dfg/DFGSpeculativeJIT32_64.cpp: |
| (JSC::DFG::SpeculativeJIT::compile): |
| (JSC::DFG::SpeculativeJIT::cachedPutById): Deleted. |
| (JSC::DFG::SpeculativeJIT::nonSpeculativePeepholeBranch): Deleted. |
| (JSC::DFG::CompareAndBoxBooleanSlowPathGenerator::CompareAndBoxBooleanSlowPathGenerator): Deleted. |
| (JSC::DFG::CompareAndBoxBooleanSlowPathGenerator::generateInternal): Deleted. |
| (JSC::DFG::SpeculativeJIT::nonSpeculativeNonPeepholeCompare): Deleted. |
| (JSC::DFG::SpeculativeJIT::compileMiscStrictEq): Deleted. |
| (JSC::DFG::SpeculativeJIT::emitInitializeButterfly): Deleted. |
| (JSC::DFG::SpeculativeJIT::compileAllocateNewArrayWithSize): Deleted. |
| * dfg/DFGSpeculativeJIT64.cpp: |
| (JSC::DFG::SpeculativeJIT::nonSpeculativeNonPeepholeStrictEq): |
| (JSC::DFG::SpeculativeJIT::compile): |
| (JSC::DFG::SpeculativeJIT::cachedPutById): Deleted. |
| (JSC::DFG::SpeculativeJIT::nonSpeculativePeepholeBranch): Deleted. |
| (JSC::DFG::CompareAndBoxBooleanSlowPathGenerator::CompareAndBoxBooleanSlowPathGenerator): Deleted. |
| (): Deleted. |
| (JSC::DFG::SpeculativeJIT::nonSpeculativeNonPeepholeCompare): Deleted. |
| (JSC::DFG::SpeculativeJIT::compileMiscStrictEq): Deleted. |
| (JSC::DFG::SpeculativeJIT::emitInitializeButterfly): Deleted. |
| (JSC::DFG::SpeculativeJIT::compileAllocateNewArrayWithSize): Deleted. |
| * ftl/FTLLowerDFGToB3.cpp: |
| (JSC::FTL::DFG::LowerDFGToB3::compileHasIndexedProperty): |
| operationHasIndexedPropertyByInt starts returning unblessed boolean with size_t. |
| |
| * jit/AssemblyHelpers.h: |
| (JSC::AssemblyHelpers::loadValue): |
| (JSC::AssemblyHelpers::selectScratchGPR): |
| (JSC::AssemblyHelpers::constructRegisterSet): |
| * jit/RegisterSet.h: |
| (JSC::RegisterSet::setAny): |
| Clean up selectScratchGPR code to pass JSValueRegs. |
| |
| 2018-04-10 Caio Lima <ticaiolima@gmail.com> |
| |
| [ESNext][BigInt] Add support for BigInt in SpeculatedType |
| https://bugs.webkit.org/show_bug.cgi?id=182470 |
| |
| Reviewed by Saam Barati. |
| |
| This patch introduces the SpecBigInt type to DFG to enable BigInt |
| speculation into DFG and FTL. |
| |
| With SpecBigInt introduction, we can then specialize "===" operations |
| to BigInts. As we are doing for some cells, we first check if operands |
| are pointing to the same JSCell, and if it is false, we |
| fallback to "operationCompareStrictEqCell". The idea in further |
| patches is to implement BigInt equality check directly in |
| assembly. |
| |
| We are also adding support for BigInt constant folding into |
| TypeOf operation. |
| |
| * bytecode/SpeculatedType.cpp: |
| (JSC::dumpSpeculation): |
| (JSC::speculationFromClassInfo): |
| (JSC::speculationFromStructure): |
| (JSC::speculationFromJSType): |
| (JSC::speculationFromString): |
| * bytecode/SpeculatedType.h: |
| (JSC::isBigIntSpeculation): |
| * dfg/DFGAbstractInterpreterInlines.h: |
| (JSC::DFG::AbstractInterpreter<AbstractStateType>::executeEffects): |
| * dfg/DFGAbstractValue.cpp: |
| (JSC::DFG::AbstractValue::set): |
| * dfg/DFGConstantFoldingPhase.cpp: |
| (JSC::DFG::ConstantFoldingPhase::foldConstants): |
| * dfg/DFGFixupPhase.cpp: |
| (JSC::DFG::FixupPhase::fixupNode): |
| (JSC::DFG::FixupPhase::fixupToThis): |
| (JSC::DFG::FixupPhase::observeUseKindOnNode): |
| * dfg/DFGInferredTypeCheck.cpp: |
| (JSC::DFG::insertInferredTypeCheck): |
| * dfg/DFGNode.h: |
| (JSC::DFG::Node::shouldSpeculateBigInt): |
| * dfg/DFGPredictionPropagationPhase.cpp: |
| * dfg/DFGSafeToExecute.h: |
| (JSC::DFG::SafeToExecuteEdge::operator()): |
| * dfg/DFGSpeculativeJIT.cpp: |
| (JSC::DFG::SpeculativeJIT::compileStrictEq): |
| (JSC::DFG::SpeculativeJIT::speculateBigInt): |
| (JSC::DFG::SpeculativeJIT::speculate): |
| * dfg/DFGSpeculativeJIT.h: |
| * dfg/DFGSpeculativeJIT32_64.cpp: |
| (JSC::DFG::SpeculativeJIT::compileBigIntEquality): |
| * dfg/DFGSpeculativeJIT64.cpp: |
| (JSC::DFG::SpeculativeJIT::compileBigIntEquality): |
| * dfg/DFGUseKind.cpp: |
| (WTF::printInternal): |
| * dfg/DFGUseKind.h: |
| (JSC::DFG::typeFilterFor): |
| (JSC::DFG::isCell): |
| * ftl/FTLCapabilities.cpp: |
| (JSC::FTL::canCompile): |
| * ftl/FTLLowerDFGToB3.cpp: |
| (JSC::FTL::DFG::LowerDFGToB3::compileCompareStrictEq): |
| (JSC::FTL::DFG::LowerDFGToB3::checkInferredType): |
| (JSC::FTL::DFG::LowerDFGToB3::speculate): |
| (JSC::FTL::DFG::LowerDFGToB3::isNotBigInt): |
| (JSC::FTL::DFG::LowerDFGToB3::speculateBigInt): |
| * jit/AssemblyHelpers.cpp: |
| (JSC::AssemblyHelpers::branchIfNotType): |
| * jit/AssemblyHelpers.h: |
| (JSC::AssemblyHelpers::branchIfBigInt): |
| (JSC::AssemblyHelpers::branchIfNotBigInt): |
| * runtime/InferredType.cpp: |
| (JSC::InferredType::Descriptor::forValue): |
| (JSC::InferredType::Descriptor::putByIdFlags const): |
| (JSC::InferredType::Descriptor::merge): |
| (WTF::printInternal): |
| * runtime/InferredType.h: |
| * runtime/JSBigInt.h: |
| |
| 2018-04-10 Filip Pizlo <fpizlo@apple.com> |
| |
| Unreviewed, fix cloop build. |
| |
| * dfg/DFGAbstractInterpreterClobberState.cpp: |
| |
| 2018-04-10 Mark Lam <mark.lam@apple.com> |
| |
| Make the ASSERT in MarkedSpace::sizeClassToIndex() a RELEASE_ASSERT. |
| https://bugs.webkit.org/show_bug.cgi?id=184464 |
| <rdar://problem/39323947> |
| |
| Reviewed by Saam Barati. |
| |
| * heap/MarkedSpace.h: |
| (JSC::MarkedSpace::sizeClassToIndex): |
| |
| 2018-04-09 Filip Pizlo <fpizlo@apple.com> |
| |
| DFG AI and clobberize should agree with each other |
| https://bugs.webkit.org/show_bug.cgi?id=184440 |
| |
| Reviewed by Saam Barati. |
| |
| One way to fix bugs involving underapproximation in AI or clobberize is to assert that they |
| agree with each other. That's what this patch does: it adds an assertion that AI's structure |
| state tracking must be equivalent to JSCell_structureID being clobbered. |
| |
| One subtlety is that AI sometimes folds away structure clobbering using information that |
| clobberize doesn't have. So, we track this wuth special kinds of AI states (FoldedClobber and |
| ObservedTransitions). |
| |
| This fixes a bunch of cases of AI missing clobberStructures/clobberWorld and one case of |
| clobberize missing a write(Heap). |
| |
| This also makes some cases more precise in order to appease the assertion. Making things more |
| precise might make things faster, but I didn't measure it because that wasn't the goal. |
| |
| * JavaScriptCore.xcodeproj/project.pbxproj: |
| * Sources.txt: |
| * dfg/DFGAbstractInterpreter.h: |
| * dfg/DFGAbstractInterpreterClobberState.cpp: Added. |
| (WTF::printInternal): |
| * dfg/DFGAbstractInterpreterClobberState.h: Added. |
| (JSC::DFG::mergeClobberStates): |
| * dfg/DFGAbstractInterpreterInlines.h: |
| (JSC::DFG::AbstractInterpreter<AbstractStateType>::startExecuting): |
| (JSC::DFG::AbstractInterpreter<AbstractStateType>::executeEffects): |
| (JSC::DFG::AbstractInterpreter<AbstractStateType>::didFoldClobberWorld): |
| (JSC::DFG::AbstractInterpreter<AbstractStateType>::clobberStructures): |
| (JSC::DFG::AbstractInterpreter<AbstractStateType>::didFoldClobberStructures): |
| (JSC::DFG::AbstractInterpreter<AbstractStateType>::observeTransition): |
| (JSC::DFG::AbstractInterpreter<AbstractStateType>::observeTransitions): |
| (JSC::DFG::AbstractInterpreter<AbstractStateType>::setDidClobber): Deleted. |
| * dfg/DFGAtTailAbstractState.h: |
| (JSC::DFG::AtTailAbstractState::setClobberState): |
| (JSC::DFG::AtTailAbstractState::mergeClobberState): |
| (JSC::DFG::AtTailAbstractState::setDidClobber): Deleted. |
| * dfg/DFGCFAPhase.cpp: |
| (JSC::DFG::CFAPhase::performBlockCFA): |
| * dfg/DFGClobberSet.cpp: |
| (JSC::DFG::writeSet): |
| * dfg/DFGClobberSet.h: |
| * dfg/DFGClobberize.h: |
| (JSC::DFG::clobberize): |
| * dfg/DFGConstantFoldingPhase.cpp: |
| (JSC::DFG::ConstantFoldingPhase::foldConstants): |
| * dfg/DFGInPlaceAbstractState.h: |
| (JSC::DFG::InPlaceAbstractState::clobberState const): |
| (JSC::DFG::InPlaceAbstractState::didClobberOrFolded const): |
| (JSC::DFG::InPlaceAbstractState::didClobber const): |
| (JSC::DFG::InPlaceAbstractState::setClobberState): |
| (JSC::DFG::InPlaceAbstractState::mergeClobberState): |
| (JSC::DFG::InPlaceAbstractState::setDidClobber): Deleted. |
| |
| 2018-04-10 Filip Pizlo <fpizlo@apple.com> |
| |
| ExecutableToCodeBlockEdge::visitChildren() should be cool with m_codeBlock being null since we clear it in finalizeUnconditionally() |
| https://bugs.webkit.org/show_bug.cgi?id=184460 |
| <rdar://problem/37610966> |
| |
| Reviewed by Mark Lam. |
| |
| * bytecode/ExecutableToCodeBlockEdge.cpp: |
| (JSC::ExecutableToCodeBlockEdge::visitChildren): |
| |
| 2018-04-10 Filip Pizlo <fpizlo@apple.com> |
| |
| REGRESSION(r227341 and r227742): AI and clobberize should be precise and consistent about the effectfulness of CompareEq |
| https://bugs.webkit.org/show_bug.cgi?id=184455 |
| |
| Reviewed by Michael Saboff. |
| |
| LICM is sort of an assertion that AI is as precise as clobberize about effects. If clobberize |
| says that something is not effectful, then LICM will try to hoist it. But LICM's AI hack |
| (AtTailAbstractState) cannot handle hoisting of things that have effects. So, if AI thinks that |
| the thing being hoisted does have effects, then we get a crash. |
| |
| In r227341, we incorrectly told AI that CompareEq(Untyped:, _) is effectful. In fact, only |
| ComapreEq(Untyped:, Untyped:) is effectful, and clobberize knew this already. As a result, LICM |
| would blow up if we hoisted CompareEq(Untyped:, Other:), which clobberize knew wasn't |
| effectful. |
| |
| Instead of fixing this by making AI precise, in r227742 we made matters worse by then breaking |
| clobberize to also think that CompareEq(Untyped:, _) is effectful. |
| |
| This fixes the whole situation by teaching both clobberize and AI that the only effectful form |
| of CompareEq is ComapreEq(Untyped:, Untyped:). |
| |
| * dfg/DFGAbstractInterpreterInlines.h: |
| (JSC::DFG::AbstractInterpreter<AbstractStateType>::executeEffects): |
| * dfg/DFGClobberize.h: |
| (JSC::DFG::clobberize): |
| |
| 2018-04-09 Filip Pizlo <fpizlo@apple.com> |
| |
| Executing known edge types may reveal a contradiction causing us to emit an exit at a node that is not allowed to exit |
| https://bugs.webkit.org/show_bug.cgi?id=184372 |
| |
| Reviewed by Saam Barati. |
| |
| We do a pretty good job of not emitting checks for KnownBlah edges, since those mean that we |
| have already proved, using techniques that are more precise than AI, that the edge has type |
| Blah. Unfortunately, we do not handle this case gracefully when AI state becomes bottom, |
| because we have a bad habit of treating terminate/terminateSpeculativeExecution as something |
| other than a check - so we think we can call those just because we should have already |
| bailed. It's better to think of them as the result of folding a check. Therefore, we should |
| only do it if there had been a check to begin with. |
| |
| * dfg/DFGSpeculativeJIT64.cpp: |
| (JSC::DFG::SpeculativeJIT::fillSpeculateInt32Internal): |
| (JSC::DFG::SpeculativeJIT::fillSpeculateInt52): |
| (JSC::DFG::SpeculativeJIT::fillSpeculateDouble): |
| (JSC::DFG::SpeculativeJIT::fillSpeculateCell): |
| (JSC::DFG::SpeculativeJIT::fillSpeculateBoolean): |
| * ftl/FTLLowerDFGToB3.cpp: |
| (JSC::FTL::DFG::LowerDFGToB3::lowInt32): |
| (JSC::FTL::DFG::LowerDFGToB3::lowInt52): |
| (JSC::FTL::DFG::LowerDFGToB3::lowCell): |
| (JSC::FTL::DFG::LowerDFGToB3::lowBoolean): |
| (JSC::FTL::DFG::LowerDFGToB3::lowDouble): |
| (JSC::FTL::DFG::LowerDFGToB3::speculate): |
| (JSC::FTL::DFG::LowerDFGToB3::speculateCellOrOther): |
| (JSC::FTL::DFG::LowerDFGToB3::speculateStringOrOther): |
| |
| 2018-04-08 Yusuke Suzuki <utatane.tea@gmail.com> |
| |
| [JSC] Introduce @putByIdDirectPrivate |
| https://bugs.webkit.org/show_bug.cgi?id=184400 |
| |
| Reviewed by Saam Barati. |
| |
| This patch adds @putByIdDirectPrivate() to use it for builtin JS. |
| @getByIdDirectPrivate and @putByIdDirectPrivate are pair of intrinsics |
| accessing to ECMAScript internal fields. |
| |
| This change removes accidental [[Put]] operation to an object whose [[Prototype]] |
| has internal fields (not direct properties). By using @getByIdDirectPrivate() and |
| @putByIdDirectPrivate(), we strongly keep the semantics of the ECMAScript internal |
| fields that accessing to the internal fields does not traverse prototype chains. |
| |
| * builtins/ArrayIteratorPrototype.js: |
| (globalPrivate.arrayIteratorValueNext): |
| (globalPrivate.arrayIteratorKeyNext): |
| (globalPrivate.arrayIteratorKeyValueNext): |
| * builtins/ArrayPrototype.js: |
| (globalPrivate.createArrayIterator): |
| * builtins/AsyncFromSyncIteratorPrototype.js: |
| (globalPrivate.AsyncFromSyncIteratorConstructor): |
| * builtins/AsyncFunctionPrototype.js: |
| (globalPrivate.asyncFunctionResume): |
| * builtins/AsyncGeneratorPrototype.js: |
| (globalPrivate.asyncGeneratorQueueEnqueue): |
| (globalPrivate.asyncGeneratorQueueDequeue): |
| (asyncGeneratorYieldAwaited): |
| (globalPrivate.asyncGeneratorYield): |
| (globalPrivate.doAsyncGeneratorBodyCall): |
| (globalPrivate.asyncGeneratorResumeNext): |
| * builtins/GeneratorPrototype.js: |
| (globalPrivate.generatorResume): |
| * builtins/MapIteratorPrototype.js: |
| (globalPrivate.mapIteratorNext): |
| * builtins/MapPrototype.js: |
| (globalPrivate.createMapIterator): |
| * builtins/ModuleLoaderPrototype.js: |
| (forceFulfillPromise): |
| * builtins/PromiseOperations.js: |
| (globalPrivate.newHandledRejectedPromise): |
| (globalPrivate.rejectPromise): |
| (globalPrivate.fulfillPromise): |
| (globalPrivate.initializePromise): |
| * builtins/PromisePrototype.js: |
| (then): |
| * builtins/SetIteratorPrototype.js: |
| (globalPrivate.setIteratorNext): |
| * builtins/SetPrototype.js: |
| (globalPrivate.createSetIterator): |
| * builtins/StringIteratorPrototype.js: |
| (next): |
| * bytecode/BytecodeIntrinsicRegistry.h: |
| * bytecompiler/NodesCodegen.cpp: |
| (JSC::BytecodeIntrinsicNode::emit_intrinsic_putByIdDirect): |
| (JSC::BytecodeIntrinsicNode::emit_intrinsic_putByIdDirectPrivate): |
| |
| 2018-04-09 Mark Lam <mark.lam@apple.com> |
| |
| Decorate method table entries to support pointer profiling. |
| https://bugs.webkit.org/show_bug.cgi?id=184430 |
| <rdar://problem/39296190> |
| |
| Reviewed by Saam Barati. |
| |
| * runtime/ClassInfo.h: |
| |
| 2018-04-09 Michael Catanzaro <mcatanzaro@igalia.com> |
| |
| [WPE] Don't install JSC C API headers |
| https://bugs.webkit.org/show_bug.cgi?id=184375 |
| |
| Reviewed by Žan Doberšek. |
| |
| None of the functions declared in these headers are exported in WPE. Use the new jsc API |
| instead. |
| |
| * PlatformWPE.cmake: |
| |
| 2018-04-08 Mark Lam <mark.lam@apple.com> |
| |
| Add pointer profiling to the FTL and supporting code. |
| https://bugs.webkit.org/show_bug.cgi?id=184395 |
| <rdar://problem/39264019> |
| |
| Reviewed by Michael Saboff and Filip Pizlo. |
| |
| * assembler/CodeLocation.h: |
| (JSC::CodeLocationLabel::retagged): |
| (JSC::CodeLocationJump::retagged): |
| * assembler/LinkBuffer.h: |
| (JSC::LinkBuffer::locationOf): |
| * dfg/DFGJITCompiler.cpp: |
| (JSC::DFG::JITCompiler::linkOSRExits): |
| (JSC::DFG::JITCompiler::link): |
| * ftl/FTLCompile.cpp: |
| (JSC::FTL::compile): |
| * ftl/FTLExceptionTarget.cpp: |
| (JSC::FTL::ExceptionTarget::label): |
| (JSC::FTL::ExceptionTarget::jumps): |
| * ftl/FTLExceptionTarget.h: |
| * ftl/FTLJITCode.cpp: |
| (JSC::FTL::JITCode::executableAddressAtOffset): |
| * ftl/FTLLazySlowPath.cpp: |
| (JSC::FTL::LazySlowPath::~LazySlowPath): |
| (JSC::FTL::LazySlowPath::initialize): |
| (JSC::FTL::LazySlowPath::generate): |
| (JSC::FTL::LazySlowPath::LazySlowPath): Deleted. |
| * ftl/FTLLazySlowPath.h: |
| * ftl/FTLLink.cpp: |
| (JSC::FTL::link): |
| * ftl/FTLLowerDFGToB3.cpp: |
| (JSC::FTL::DFG::LowerDFGToB3::lower): |
| (JSC::FTL::DFG::LowerDFGToB3::compileCallOrConstruct): |
| (JSC::FTL::DFG::LowerDFGToB3::compileDirectCallOrConstruct): |
| (JSC::FTL::DFG::LowerDFGToB3::compileTailCall): |
| (JSC::FTL::DFG::LowerDFGToB3::compileCallOrConstructVarargsSpread): |
| (JSC::FTL::DFG::LowerDFGToB3::compileCallOrConstructVarargs): |
| (JSC::FTL::DFG::LowerDFGToB3::compileCallEval): |
| (JSC::FTL::DFG::LowerDFGToB3::lazySlowPath): |
| * ftl/FTLOSRExitCompiler.cpp: |
| (JSC::FTL::compileStub): |
| (JSC::FTL::compileFTLOSRExit): |
| * ftl/FTLOSRExitHandle.cpp: |
| (JSC::FTL::OSRExitHandle::emitExitThunk): |
| * ftl/FTLOperations.cpp: |
| (JSC::FTL::compileFTLLazySlowPath): |
| * ftl/FTLOutput.h: |
| (JSC::FTL::Output::callWithoutSideEffects): |
| (JSC::FTL::Output::operation): |
| * ftl/FTLPatchpointExceptionHandle.cpp: |
| (JSC::FTL::PatchpointExceptionHandle::scheduleExitCreationForUnwind): |
| * ftl/FTLSlowPathCall.cpp: |
| (JSC::FTL::SlowPathCallContext::makeCall): |
| * ftl/FTLSlowPathCallKey.h: |
| (JSC::FTL::SlowPathCallKey::withCallTarget): |
| (JSC::FTL::SlowPathCallKey::callPtrTag const): |
| * ftl/FTLThunks.cpp: |
| (JSC::FTL::genericGenerationThunkGenerator): |
| (JSC::FTL::osrExitGenerationThunkGenerator): |
| (JSC::FTL::lazySlowPathGenerationThunkGenerator): |
| (JSC::FTL::slowPathCallThunkGenerator): |
| * jit/JITMathIC.h: |
| (JSC::isProfileEmpty): |
| * jit/Repatch.cpp: |
| (JSC::readPutICCallTarget): |
| (JSC::ftlThunkAwareRepatchCall): |
| (JSC::tryCacheGetByID): |
| (JSC::repatchGetByID): |
| (JSC::tryCachePutByID): |
| (JSC::repatchPutByID): |
| (JSC::repatchIn): |
| (JSC::resetGetByID): |
| (JSC::resetPutByID): |
| (JSC::readCallTarget): Deleted. |
| * jit/Repatch.h: |
| * runtime/PtrTag.h: |
| |
| 2018-04-08 Yusuke Suzuki <utatane.tea@gmail.com> |
| |
| Unreviewed, attempt to fix Windows build |
| https://bugs.webkit.org/show_bug.cgi?id=183508 |
| |
| * jit/JIT.h: |
| |
| 2018-04-08 Yusuke Suzuki <utatane.tea@gmail.com> |
| |
| Unreviewed, build fix for Windows by suppressing padding warning for JIT |
| https://bugs.webkit.org/show_bug.cgi?id=183508 |
| |
| * jit/JIT.h: |
| |
| 2018-04-08 Yusuke Suzuki <utatane.tea@gmail.com> |
| |
| Use alignas instead of compiler-specific attributes |
| https://bugs.webkit.org/show_bug.cgi?id=183508 |
| |
| Reviewed by Mark Lam. |
| |
| Use C++11 alignas specifier. It is portable compared to compiler-specific aligned attributes. |
| |
| * heap/RegisterState.h: |
| * jit/JIT.h: |
| (JSC::JIT::compile): Deleted. |
| (JSC::JIT::compileGetByVal): Deleted. |
| (JSC::JIT::compileGetByValWithCachedId): Deleted. |
| (JSC::JIT::compilePutByVal): Deleted. |
| (JSC::JIT::compileDirectPutByVal): Deleted. |
| (JSC::JIT::compilePutByValWithCachedId): Deleted. |
| (JSC::JIT::compileHasIndexedProperty): Deleted. |
| (JSC::JIT::appendCall): Deleted. |
| (JSC::JIT::appendCallWithSlowPathReturnType): Deleted. |
| (JSC::JIT::exceptionCheck): Deleted. |
| (JSC::JIT::exceptionCheckWithCallFrameRollback): Deleted. |
| (JSC::JIT::emitInt32Load): Deleted. |
| (JSC::JIT::emitInt32GetByVal): Deleted. |
| (JSC::JIT::emitInt32PutByVal): Deleted. |
| (JSC::JIT::emitDoublePutByVal): Deleted. |
| (JSC::JIT::emitContiguousPutByVal): Deleted. |
| (JSC::JIT::emitStoreCell): Deleted. |
| (JSC::JIT::getSlowCase): Deleted. |
| (JSC::JIT::linkSlowCase): Deleted. |
| (JSC::JIT::linkDummySlowCase): Deleted. |
| (JSC::JIT::linkAllSlowCases): Deleted. |
| (JSC::JIT::callOperation): Deleted. |
| (JSC::JIT::callOperationWithProfile): Deleted. |
| (JSC::JIT::callOperationWithResult): Deleted. |
| (JSC::JIT::callOperationNoExceptionCheck): Deleted. |
| (JSC::JIT::callOperationWithCallFrameRollbackOnException): Deleted. |
| (JSC::JIT::emitEnterOptimizationCheck): Deleted. |
| (JSC::JIT::sampleCodeBlock): Deleted. |
| (JSC::JIT::canBeOptimized): Deleted. |
| (JSC::JIT::canBeOptimizedOrInlined): Deleted. |
| (JSC::JIT::shouldEmitProfiling): Deleted. |
| * runtime/VM.h: |
| |
| 2018-04-08 Yusuke Suzuki <utatane.tea@gmail.com> |
| |
| Unreviewed, follow-up patch for DFG 32bit |
| https://bugs.webkit.org/show_bug.cgi?id=183970 |
| |
| * dfg/DFGSpeculativeJIT32_64.cpp: |
| (JSC::DFG::SpeculativeJIT::cachedGetById): |
| |
| 2018-04-08 Yusuke Suzuki <utatane.tea@gmail.com> |
| |
| [JSC] Fix incorrect assertion for VM's regexp buffer lock |
| https://bugs.webkit.org/show_bug.cgi?id=184398 |
| |
| Reviewed by Mark Lam. |
| |
| isLocked check before taking a lock is incorrect. |
| |
| * runtime/VM.cpp: |
| (JSC::VM::acquireRegExpPatternContexBuffer): |
| |
| 2018-04-08 Yusuke Suzuki <utatane.tea@gmail.com> |
| |
| [JSC] Introduce op_get_by_id_direct |
| https://bugs.webkit.org/show_bug.cgi?id=183970 |
| |
| Reviewed by Filip Pizlo. |
| |
| This patch introduces op_get_by_id_direct bytecode. This is super similar to op_get_by_id. |
| But it just performs [[GetOwnProperty]] operation instead of [[Get]]. We support this |
| in all the tiers, so using this opcode does not lead to inefficiency. |
| |
| Main purpose of this op_get_by_id_direct is using it for private properties. We are using |
| properties indexed with private symbols to implement ECMAScript internal fields. Before this |
| patch, we just use get and put operations. However, it is not the correct semantics: accessing |
| to the internal fields should not traverse prototype chain, which is specified in the spec. |
| We use op_get_by_id_direct to access to properties which are used internal fields, so that |
| prototype chains are not traversed. |
| |
| To emit op_get_by_id_direct, we introduce a new bytecode intrinsic @getByIdDirectPrivate(). |
| When you write `@getByIdDirectPrivate(object, "name")`, the bytecode generator emits the |
| bytecode `op_get_by_id_direct, object, @name`. |
| |
| * builtins/ArrayIteratorPrototype.js: |
| (next): |
| (globalPrivate.arrayIteratorValueNext): |
| (globalPrivate.arrayIteratorKeyNext): |
| (globalPrivate.arrayIteratorKeyValueNext): |
| * builtins/AsyncFromSyncIteratorPrototype.js: |
| * builtins/AsyncFunctionPrototype.js: |
| (globalPrivate.asyncFunctionResume): |
| * builtins/AsyncGeneratorPrototype.js: |
| (globalPrivate.asyncGeneratorQueueIsEmpty): |
| (globalPrivate.asyncGeneratorQueueEnqueue): |
| (globalPrivate.asyncGeneratorQueueDequeue): |
| (globalPrivate.asyncGeneratorDequeue): |
| (globalPrivate.isExecutionState): |
| (globalPrivate.isSuspendYieldState): |
| (globalPrivate.asyncGeneratorReject): |
| (globalPrivate.asyncGeneratorResolve): |
| (globalPrivate.doAsyncGeneratorBodyCall): |
| (globalPrivate.asyncGeneratorEnqueue): |
| * builtins/GeneratorPrototype.js: |
| (globalPrivate.generatorResume): |
| (next): |
| (return): |
| (throw): |
| * builtins/MapIteratorPrototype.js: |
| (next): |
| * builtins/PromiseOperations.js: |
| (globalPrivate.isPromise): |
| (globalPrivate.rejectPromise): |
| (globalPrivate.fulfillPromise): |
| * builtins/PromisePrototype.js: |
| (then): |
| * builtins/SetIteratorPrototype.js: |
| (next): |
| * builtins/StringIteratorPrototype.js: |
| (next): |
| * builtins/TypedArrayConstructor.js: |
| (of): |
| (from): |
| * bytecode/BytecodeDumper.cpp: |
| (JSC::BytecodeDumper<Block>::dumpBytecode): |
| * bytecode/BytecodeIntrinsicRegistry.h: |
| * bytecode/BytecodeList.json: |
| * bytecode/BytecodeUseDef.h: |
| (JSC::computeUsesForBytecodeOffset): |
| (JSC::computeDefsForBytecodeOffset): |
| * bytecode/CodeBlock.cpp: |
| (JSC::CodeBlock::finishCreation): |
| (JSC::CodeBlock::finalizeLLIntInlineCaches): |
| * bytecode/GetByIdStatus.cpp: |
| (JSC::GetByIdStatus::computeFromLLInt): |
| (JSC::GetByIdStatus::computeFor): |
| * bytecode/StructureStubInfo.cpp: |
| (JSC::StructureStubInfo::reset): |
| * bytecode/StructureStubInfo.h: |
| (JSC::appropriateOptimizingGetByIdFunction): |
| (JSC::appropriateGenericGetByIdFunction): |
| * bytecompiler/BytecodeGenerator.cpp: |
| (JSC::BytecodeGenerator::emitDirectGetById): |
| * bytecompiler/BytecodeGenerator.h: |
| * bytecompiler/NodesCodegen.cpp: |
| (JSC::BytecodeIntrinsicNode::emit_intrinsic_getByIdDirect): |
| (JSC::BytecodeIntrinsicNode::emit_intrinsic_getByIdDirectPrivate): |
| * dfg/DFGAbstractInterpreterInlines.h: |
| (JSC::DFG::AbstractInterpreter<AbstractStateType>::executeEffects): |
| * dfg/DFGByteCodeParser.cpp: |
| (JSC::DFG::ByteCodeParser::handleGetById): |
| (JSC::DFG::ByteCodeParser::parseBlock): |
| * dfg/DFGCapabilities.cpp: |
| (JSC::DFG::capabilityLevel): |
| * dfg/DFGClobberize.h: |
| (JSC::DFG::clobberize): |
| * dfg/DFGConstantFoldingPhase.cpp: |
| (JSC::DFG::ConstantFoldingPhase::foldConstants): |
| * dfg/DFGDoesGC.cpp: |
| (JSC::DFG::doesGC): |
| * dfg/DFGFixupPhase.cpp: |
| (JSC::DFG::FixupPhase::fixupNode): |
| * dfg/DFGNode.h: |
| (JSC::DFG::Node::convertToGetByOffset): |
| (JSC::DFG::Node::convertToMultiGetByOffset): |
| (JSC::DFG::Node::hasIdentifier): |
| (JSC::DFG::Node::hasHeapPrediction): |
| * dfg/DFGNodeType.h: |
| * dfg/DFGOperations.cpp: |
| * dfg/DFGOperations.h: |
| * dfg/DFGPredictionPropagationPhase.cpp: |
| * dfg/DFGSafeToExecute.h: |
| (JSC::DFG::safeToExecute): |
| * dfg/DFGSpeculativeJIT.cpp: |
| (JSC::DFG::SpeculativeJIT::compileGetById): |
| (JSC::DFG::SpeculativeJIT::compileGetByIdFlush): |
| (JSC::DFG::SpeculativeJIT::compileTryGetById): Deleted. |
| * dfg/DFGSpeculativeJIT.h: |
| * dfg/DFGSpeculativeJIT32_64.cpp: |
| (JSC::DFG::SpeculativeJIT::cachedGetById): |
| (JSC::DFG::SpeculativeJIT::compile): |
| * dfg/DFGSpeculativeJIT64.cpp: |
| (JSC::DFG::SpeculativeJIT::cachedGetById): |
| (JSC::DFG::SpeculativeJIT::compile): |
| * ftl/FTLCapabilities.cpp: |
| (JSC::FTL::canCompile): |
| * ftl/FTLLowerDFGToB3.cpp: |
| (JSC::FTL::DFG::LowerDFGToB3::compileNode): |
| (JSC::FTL::DFG::LowerDFGToB3::compileGetById): |
| (JSC::FTL::DFG::LowerDFGToB3::compileGetByIdWithThis): |
| (JSC::FTL::DFG::LowerDFGToB3::getById): |
| * jit/JIT.cpp: |
| (JSC::JIT::privateCompileMainPass): |
| (JSC::JIT::privateCompileSlowCases): |
| * jit/JIT.h: |
| * jit/JITOperations.cpp: |
| * jit/JITOperations.h: |
| * jit/JITPropertyAccess.cpp: |
| (JSC::JIT::emit_op_get_by_id_direct): |
| (JSC::JIT::emitSlow_op_get_by_id_direct): |
| * jit/JITPropertyAccess32_64.cpp: |
| (JSC::JIT::emit_op_get_by_id_direct): |
| (JSC::JIT::emitSlow_op_get_by_id_direct): |
| * jit/Repatch.cpp: |
| (JSC::appropriateOptimizingGetByIdFunction): |
| (JSC::appropriateGetByIdFunction): |
| (JSC::tryCacheGetByID): |
| (JSC::repatchGetByID): |
| (JSC::appropriateGenericGetByIdFunction): Deleted. |
| * jit/Repatch.h: |
| * llint/LLIntSlowPaths.cpp: |
| (JSC::LLInt::LLINT_SLOW_PATH_DECL): |
| * llint/LLIntSlowPaths.h: |
| * llint/LowLevelInterpreter32_64.asm: |
| * llint/LowLevelInterpreter64.asm: |
| * runtime/JSCJSValue.h: |
| * runtime/JSCJSValueInlines.h: |
| (JSC::JSValue::getOwnPropertySlot const): |
| * runtime/JSObject.h: |
| * runtime/JSObjectInlines.h: |
| (JSC::JSObject::getOwnPropertySlotInline): |
| |
| 2018-04-07 Yusuke Suzuki <utatane.tea@gmail.com> |
| |
| [JSC] Remove several asXXX functions |
| https://bugs.webkit.org/show_bug.cgi?id=184355 |
| |
| Reviewed by JF Bastien. |
| |
| Remove asActivation, asInternalFunction, and asGetterSetter. |
| Use jsCast<> / jsDynamicCast<> consistently. |
| |
| * runtime/ArrayConstructor.cpp: |
| (JSC::constructArrayWithSizeQuirk): |
| * runtime/AsyncFunctionConstructor.cpp: |
| (JSC::callAsyncFunctionConstructor): |
| (JSC::constructAsyncFunctionConstructor): |
| * runtime/AsyncGeneratorFunctionConstructor.cpp: |
| (JSC::callAsyncGeneratorFunctionConstructor): |
| (JSC::constructAsyncGeneratorFunctionConstructor): |
| * runtime/BooleanConstructor.cpp: |
| (JSC::constructWithBooleanConstructor): |
| * runtime/DateConstructor.cpp: |
| (JSC::constructWithDateConstructor): |
| * runtime/ErrorConstructor.cpp: |
| (JSC::Interpreter::constructWithErrorConstructor): |
| (JSC::Interpreter::callErrorConstructor): |
| * runtime/FunctionConstructor.cpp: |
| (JSC::constructWithFunctionConstructor): |
| (JSC::callFunctionConstructor): |
| * runtime/FunctionPrototype.cpp: |
| (JSC::functionProtoFuncToString): |
| * runtime/GeneratorFunctionConstructor.cpp: |
| (JSC::callGeneratorFunctionConstructor): |
| (JSC::constructGeneratorFunctionConstructor): |
| * runtime/GetterSetter.h: |
| (JSC::asGetterSetter): Deleted. |
| * runtime/InternalFunction.h: |
| (JSC::asInternalFunction): Deleted. |
| * runtime/JSGenericTypedArrayViewConstructorInlines.h: |
| (JSC::constructGenericTypedArrayView): |
| * runtime/JSLexicalEnvironment.h: |
| (JSC::asActivation): Deleted. |
| * runtime/JSObject.cpp: |
| (JSC::validateAndApplyPropertyDescriptor): |
| * runtime/MapConstructor.cpp: |
| (JSC::constructMap): |
| * runtime/PropertyDescriptor.cpp: |
| (JSC::PropertyDescriptor::setDescriptor): |
| * runtime/RegExpConstructor.cpp: |
| (JSC::constructWithRegExpConstructor): |
| (JSC::callRegExpConstructor): |
| * runtime/SetConstructor.cpp: |
| (JSC::constructSet): |
| * runtime/StringConstructor.cpp: |
| (JSC::constructWithStringConstructor): |
| * runtime/WeakMapConstructor.cpp: |
| (JSC::constructWeakMap): |
| * runtime/WeakSetConstructor.cpp: |
| (JSC::constructWeakSet): |
| * wasm/js/WebAssemblyCompileErrorConstructor.cpp: |
| (JSC::constructJSWebAssemblyCompileError): |
| (JSC::callJSWebAssemblyCompileError): |
| * wasm/js/WebAssemblyLinkErrorConstructor.cpp: |
| (JSC::constructJSWebAssemblyLinkError): |
| (JSC::callJSWebAssemblyLinkError): |
| * wasm/js/WebAssemblyRuntimeErrorConstructor.cpp: |
| (JSC::constructJSWebAssemblyRuntimeError): |
| (JSC::callJSWebAssemblyRuntimeError): |
| |
| 2018-04-05 Mark Lam <mark.lam@apple.com> |
| |
| MacroAssemblerCodePtr::retagged() should not re-decorate the pointer on ARMv7. |
| https://bugs.webkit.org/show_bug.cgi?id=184347 |
| <rdar://problem/39183165> |
| |
| Reviewed by Michael Saboff. |
| |
| * assembler/MacroAssemblerCodeRef.h: |
| (JSC::MacroAssemblerCodePtr::MacroAssemblerCodePtr): |
| (JSC::MacroAssemblerCodePtr::retagged const): |
| |
| 2018-04-05 Stanislav Ocovaj <stanislav.ocovaj@rt-rk.com> |
| |
| [MIPS] Optimize generated JIT code for branches |
| https://bugs.webkit.org/show_bug.cgi?id=183130 |
| |
| Reviewed by Yusuke Suzuki. |
| |
| The patch https://bugs.webkit.org/show_bug.cgi?id=101328 added two nop instructions to |
| branchEqual() and branchNotEqual() in order to allow the code generated by branchPtrWithPatch() |
| to be reverted back to branchPtrWithPatch after replacing it with a 4-instruction jump. |
| However, this adds a significant overhead for all other types of branches. Since these nop's |
| protect the code that is generated by branchPtrWithPatch, this function seems like a better |
| place to add them. |
| |
| * assembler/MIPSAssembler.h: |
| (JSC::MIPSAssembler::repatchInt32): |
| (JSC::MIPSAssembler::revertJumpToMove): |
| * assembler/MacroAssemblerMIPS.h: |
| (JSC::MacroAssemblerMIPS::branchAdd32): |
| (JSC::MacroAssemblerMIPS::branchMul32): |
| (JSC::MacroAssemblerMIPS::branchSub32): |
| (JSC::MacroAssemblerMIPS::branchNeg32): |
| (JSC::MacroAssemblerMIPS::branchPtrWithPatch): |
| (JSC::MacroAssemblerMIPS::branchEqual): |
| (JSC::MacroAssemblerMIPS::branchNotEqual): |
| |
| 2018-04-05 Yusuke Suzuki <utatane.tea@gmail.com> |
| |
| [WTF] Remove StaticLock |
| https://bugs.webkit.org/show_bug.cgi?id=184332 |
| |
| Reviewed by Mark Lam. |
| |
| * API/JSValue.mm: |
| (handerForStructTag): |
| * API/JSVirtualMachine.mm: |
| (+[JSVMWrapperCache addWrapper:forJSContextGroupRef:]): |
| (+[JSVMWrapperCache wrapperForJSContextGroupRef:]): |
| * API/glib/JSCVirtualMachine.cpp: |
| (addWrapper): |
| (removeWrapper): |
| * assembler/testmasm.cpp: |
| * b3/air/testair.cpp: |
| * b3/testb3.cpp: |
| * bytecode/SuperSampler.cpp: |
| * dfg/DFGCommon.cpp: |
| * dfg/DFGCommonData.cpp: |
| * dynbench.cpp: |
| * heap/MachineStackMarker.cpp: |
| (JSC::MachineThreads::tryCopyOtherThreadStacks): |
| * inspector/remote/cocoa/RemoteConnectionToTargetCocoa.mm: |
| (Inspector::RemoteTargetHandleRunSourceGlobal): |
| (Inspector::RemoteTargetQueueTaskOnGlobalQueue): |
| * interpreter/CLoopStack.cpp: |
| * parser/SourceProvider.cpp: |
| * profiler/ProfilerDatabase.cpp: |
| * profiler/ProfilerUID.cpp: |
| (JSC::Profiler::UID::create): |
| * runtime/IntlObject.cpp: |
| (JSC::numberingSystemsForLocale): |
| * runtime/JSLock.cpp: |
| * runtime/JSLock.h: |
| * runtime/SamplingProfiler.cpp: |
| (JSC::SamplingProfiler::registerForReportAtExit): |
| * runtime/VM.cpp: |
| * wasm/WasmFaultSignalHandler.cpp: |
| |
| 2018-04-04 Mark Lam <mark.lam@apple.com> |
| |
| Add pointer profiling support to the DFG and supporting files. |
| https://bugs.webkit.org/show_bug.cgi?id=184316 |
| <rdar://problem/39188524> |
| |
| Reviewed by Filip Pizlo. |
| |
| 1. Profile lots of pointers with PtrTags. |
| |
| 2. Remove PtrTag.cpp and make ptrTagName() into an inline function. It's only |
| used for debugging anyway, and not normally called in the code. Making it |
| an inline function prevents it from taking up code space in builds when not in |
| use. |
| |
| 3. Change the call to the the arityFixupThunk in DFG code to be a near call. |
| It doesn't need to be a far call. |
| |
| * CMakeLists.txt: |
| * JavaScriptCore.xcodeproj/project.pbxproj: |
| * Sources.txt: |
| * assembler/testmasm.cpp: |
| (JSC::testProbeModifiesProgramCounter): |
| * b3/B3LowerMacros.cpp: |
| * b3/air/AirCCallSpecial.cpp: |
| (JSC::B3::Air::CCallSpecial::generate): |
| * b3/air/AirCCallSpecial.h: |
| * b3/testb3.cpp: |
| (JSC::B3::testInterpreter): |
| * bytecode/AccessCase.cpp: |
| (JSC::AccessCase::generateImpl): |
| * bytecode/HandlerInfo.h: |
| (JSC::HandlerInfo::initialize): |
| * bytecode/PolymorphicAccess.cpp: |
| (JSC::PolymorphicAccess::regenerate): |
| * dfg/DFGJITCompiler.cpp: |
| (JSC::DFG::JITCompiler::compileExceptionHandlers): |
| (JSC::DFG::JITCompiler::link): |
| (JSC::DFG::JITCompiler::compileFunction): |
| (JSC::DFG::JITCompiler::noticeCatchEntrypoint): |
| * dfg/DFGJITCompiler.h: |
| (JSC::DFG::JITCompiler::appendCall): |
| * dfg/DFGOSREntry.cpp: |
| (JSC::DFG::prepareOSREntry): |
| * dfg/DFGOSRExit.cpp: |
| (JSC::DFG::reifyInlinedCallFrames): |
| (JSC::DFG::adjustAndJumpToTarget): |
| (JSC::DFG::OSRExit::emitRestoreArguments): |
| (JSC::DFG::OSRExit::compileOSRExit): |
| * dfg/DFGOSRExitCompilerCommon.cpp: |
| (JSC::DFG::handleExitCounts): |
| (JSC::DFG::reifyInlinedCallFrames): |
| (JSC::DFG::osrWriteBarrier): |
| (JSC::DFG::adjustAndJumpToTarget): |
| * dfg/DFGOperations.cpp: |
| * dfg/DFGSlowPathGenerator.h: |
| (JSC::DFG::CallResultAndArgumentsSlowPathGenerator::CallResultAndArgumentsSlowPathGenerator): |
| (JSC::DFG::CallResultAndArgumentsSlowPathGenerator::unpackAndGenerate): |
| (JSC::DFG::slowPathCall): |
| * dfg/DFGSpeculativeJIT.cpp: |
| (JSC::DFG::SpeculativeJIT::compileMathIC): |
| * dfg/DFGSpeculativeJIT.h: |
| (JSC::DFG::SpeculativeJIT::callOperation): |
| (JSC::DFG::SpeculativeJIT::appendCall): |
| (JSC::DFG::SpeculativeJIT::appendCallSetResult): |
| * dfg/DFGSpeculativeJIT64.cpp: |
| (JSC::DFG::SpeculativeJIT::cachedGetById): |
| (JSC::DFG::SpeculativeJIT::cachedGetByIdWithThis): |
| (JSC::DFG::SpeculativeJIT::cachedPutById): |
| (JSC::DFG::SpeculativeJIT::compile): |
| * dfg/DFGThunks.cpp: |
| (JSC::DFG::osrExitThunkGenerator): |
| (JSC::DFG::osrExitGenerationThunkGenerator): |
| (JSC::DFG::osrEntryThunkGenerator): |
| * jit/AssemblyHelpers.cpp: |
| (JSC::AssemblyHelpers::emitDumbVirtualCall): |
| * jit/JIT.cpp: |
| (JSC::JIT::emitEnterOptimizationCheck): |
| (JSC::JIT::compileWithoutLinking): |
| * jit/JITCall.cpp: |
| (JSC::JIT::compileOpCallSlowCase): |
| * jit/JITMathIC.h: |
| (JSC::isProfileEmpty): |
| * jit/JITOpcodes.cpp: |
| (JSC::JIT::emit_op_catch): |
| (JSC::JIT::emitSlow_op_loop_hint): |
| * jit/JITOperations.cpp: |
| * jit/Repatch.cpp: |
| (JSC::linkSlowFor): |
| (JSC::linkFor): |
| (JSC::revertCall): |
| (JSC::unlinkFor): |
| (JSC::linkVirtualFor): |
| (JSC::linkPolymorphicCall): |
| * jit/ThunkGenerators.cpp: |
| (JSC::throwExceptionFromCallSlowPathGenerator): |
| (JSC::linkCallThunkGenerator): |
| (JSC::linkPolymorphicCallThunkGenerator): |
| (JSC::virtualThunkFor): |
| (JSC::arityFixupGenerator): |
| (JSC::unreachableGenerator): |
| * runtime/PtrTag.cpp: Removed. |
| * runtime/PtrTag.h: |
| (JSC::ptrTagName): |
| * runtime/VMEntryScope.cpp: |
| * wasm/js/WasmToJS.cpp: |
| (JSC::Wasm::wasmToJS): |
| |
| 2018-04-04 Filip Pizlo <fpizlo@apple.com> |
| |
| REGRESSION(r222563): removed DoubleReal type check causes tons of crashes because CSE has never known how to handle SaneChain |
| https://bugs.webkit.org/show_bug.cgi?id=184319 |
| |
| Reviewed by Saam Barati. |
| |
| In r222581, we replaced type checks about DoubleReal in ArrayPush in the DFG/FTL backends with |
| assertions. That's correct because FixupPhase was emitting those checks as Check(DoubleRealRep:) before |
| the ArrayPush. |
| |
| But this revealed a longstanding CSE bug: CSE will happily match a SaneChain GetByVal with a InBounds |
| GetByVal. SaneChain can return NaN while InBounds cannot. This means that if we first use AI to |
| eliminate the Check(DoubleRealRep:) based on the input being a GetByVal(InBounds) but then replace that |
| with a GetByVal(SaneChain), then we will hit the assertion. |
| |
| This teaches CSE to not replace GetByVal(InBounds) with GetByVal(SaneChain) and vice versa. That gets |
| tricky because PutByVal can match either. So, we use the fact that it's legal for a store to def() more |
| than once: PutByVal now defs() a HeapLocation for InBounds and a HeapLocation for SaneChain. |
| |
| * dfg/DFGCSEPhase.cpp: |
| * dfg/DFGClobberize.h: |
| (JSC::DFG::clobberize): |
| * dfg/DFGHeapLocation.cpp: |
| (WTF::printInternal): |
| * dfg/DFGHeapLocation.h: |
| * dfg/DFGSpeculativeJIT.cpp: |
| (JSC::DFG::SpeculativeJIT::compileArrayPush): |
| |
| 2018-04-04 Filip Pizlo <fpizlo@apple.com> |
| |
| Remove poisoning of typed array vector |
| https://bugs.webkit.org/show_bug.cgi?id=184313 |
| |
| Reviewed by Saam Barati. |
| |
| * dfg/DFGFixupPhase.cpp: |
| (JSC::DFG::FixupPhase::checkArray): |
| * dfg/DFGSpeculativeJIT.cpp: |
| (JSC::DFG::SpeculativeJIT::jumpForTypedArrayIsNeuteredIfOutOfBounds): |
| (JSC::DFG::SpeculativeJIT::compileGetIndexedPropertyStorage): |
| (JSC::DFG::SpeculativeJIT::compileGetTypedArrayByteOffset): |
| (JSC::DFG::SpeculativeJIT::compileNewTypedArrayWithSize): |
| * ftl/FTLAbstractHeapRepository.h: |
| * ftl/FTLLowerDFGToB3.cpp: |
| (JSC::FTL::DFG::LowerDFGToB3::compileGetIndexedPropertyStorage): |
| (JSC::FTL::DFG::LowerDFGToB3::compileGetTypedArrayByteOffset): |
| (JSC::FTL::DFG::LowerDFGToB3::compileNewTypedArray): |
| (JSC::FTL::DFG::LowerDFGToB3::speculateTypedArrayIsNotNeutered): |
| * jit/IntrinsicEmitter.cpp: |
| (JSC::IntrinsicGetterAccessCase::emitIntrinsicGetter): |
| * jit/JITPropertyAccess.cpp: |
| (JSC::JIT::emitIntTypedArrayGetByVal): |
| (JSC::JIT::emitFloatTypedArrayGetByVal): |
| (JSC::JIT::emitIntTypedArrayPutByVal): |
| (JSC::JIT::emitFloatTypedArrayPutByVal): |
| * llint/LowLevelInterpreter.asm: |
| * llint/LowLevelInterpreter64.asm: |
| * offlineasm/arm64.rb: |
| * offlineasm/x86.rb: |
| * runtime/CagedBarrierPtr.h: |
| * runtime/JSArrayBufferView.cpp: |
| (JSC::JSArrayBufferView::JSArrayBufferView): |
| (JSC::JSArrayBufferView::finalize): |
| (JSC::JSArrayBufferView::neuter): |
| * runtime/JSArrayBufferView.h: |
| (JSC::JSArrayBufferView::vector const): |
| (JSC::JSArrayBufferView::offsetOfVector): |
| (JSC::JSArrayBufferView::offsetOfPoisonedVector): Deleted. |
| (JSC::JSArrayBufferView::poisonFor): Deleted. |
| (JSC::JSArrayBufferView::Poison::key): Deleted. |
| * runtime/JSCPoison.cpp: |
| (JSC::initializePoison): |
| * runtime/JSCPoison.h: |
| * runtime/JSGenericTypedArrayViewInlines.h: |
| (JSC::JSGenericTypedArrayView<Adaptor>::estimatedSize): |
| (JSC::JSGenericTypedArrayView<Adaptor>::visitChildren): |
| (JSC::JSGenericTypedArrayView<Adaptor>::slowDownAndWasteMemory): |
| * runtime/JSObject.h: |
| |
| 2018-04-03 Filip Pizlo <fpizlo@apple.com> |
| |
| Don't do index masking or poisoning for DirectArguments |
| https://bugs.webkit.org/show_bug.cgi?id=184280 |
| |
| Reviewed by Saam Barati. |
| |
| * JavaScriptCore.xcodeproj/project.pbxproj: |
| * bytecode/AccessCase.cpp: |
| (JSC::AccessCase::generateWithGuard): |
| * dfg/DFGCallCreateDirectArgumentsSlowPathGenerator.h: |
| (JSC::DFG::CallCreateDirectArgumentsSlowPathGenerator::CallCreateDirectArgumentsSlowPathGenerator): |
| * dfg/DFGCallCreateDirectArgumentsWithKnownLengthSlowPathGenerator.h: Removed. |
| * dfg/DFGSpeculativeJIT.cpp: |
| (JSC::DFG::SpeculativeJIT::compileGetByValOnDirectArguments): |
| (JSC::DFG::SpeculativeJIT::compileGetArrayLength): |
| (JSC::DFG::SpeculativeJIT::compileCreateDirectArguments): |
| (JSC::DFG::SpeculativeJIT::compileGetFromArguments): |
| (JSC::DFG::SpeculativeJIT::compilePutToArguments): |
| * ftl/FTLAbstractHeapRepository.h: |
| * ftl/FTLLowerDFGToB3.cpp: |
| (JSC::FTL::DFG::LowerDFGToB3::compileGetArrayLength): |
| (JSC::FTL::DFG::LowerDFGToB3::compileGetByVal): |
| (JSC::FTL::DFG::LowerDFGToB3::compileCreateDirectArguments): |
| (JSC::FTL::DFG::LowerDFGToB3::compileGetFromArguments): |
| (JSC::FTL::DFG::LowerDFGToB3::compilePutToArguments): |
| (JSC::FTL::DFG::LowerDFGToB3::compileCheckSubClass): |
| (JSC::FTL::DFG::LowerDFGToB3::dynamicPoison): |
| (JSC::FTL::DFG::LowerDFGToB3::dynamicPoisonOnLoadedType): |
| (JSC::FTL::DFG::LowerDFGToB3::dynamicPoisonOnType): |
| (JSC::FTL::DFG::LowerDFGToB3::allocateVariableSizedHeapCell): Deleted. |
| * heap/SecurityKind.h: |
| * jit/JITPropertyAccess.cpp: |
| (JSC::JIT::emit_op_get_from_arguments): |
| (JSC::JIT::emit_op_put_to_arguments): |
| (JSC::JIT::emitDirectArgumentsGetByVal): |
| * jit/JITPropertyAccess32_64.cpp: |
| (JSC::JIT::emit_op_get_from_arguments): |
| (JSC::JIT::emit_op_put_to_arguments): |
| * llint/LowLevelInterpreter.asm: |
| * llint/LowLevelInterpreter32_64.asm: |
| * llint/LowLevelInterpreter64.asm: |
| * runtime/DirectArguments.cpp: |
| (JSC::DirectArguments::DirectArguments): |
| (JSC::DirectArguments::createUninitialized): |
| (JSC::DirectArguments::create): |
| (JSC::DirectArguments::createByCopying): |
| (JSC::DirectArguments::estimatedSize): |
| (JSC::DirectArguments::visitChildren): |
| (JSC::DirectArguments::overrideThings): |
| (JSC::DirectArguments::copyToArguments): |
| (JSC::DirectArguments::mappedArgumentsSize): |
| * runtime/DirectArguments.h: |
| * runtime/JSCPoison.h: |
| * runtime/JSLexicalEnvironment.h: |
| * runtime/JSSymbolTableObject.h: |
| |
| 2018-04-03 Filip Pizlo <fpizlo@apple.com> |
| |
| JSArray::appendMemcpy seems to be missing a barrier |
| https://bugs.webkit.org/show_bug.cgi?id=184290 |
| |
| Reviewed by Mark Lam. |
| |
| If you write to an array that may contain pointers and you didn't just allocate it, then you need to |
| barrier right after. |
| |
| I don't know if this is really a bug - it's possible that all callers of appendMemcpy do things that |
| obviate the need for this barrier. But these barriers are cheap, so we should do them if in doubt. |
| |
| * runtime/JSArray.cpp: |
| (JSC::JSArray::appendMemcpy): |
| |
| 2018-04-03 Filip Pizlo <fpizlo@apple.com> |
| |
| GC shouldn't do object distancing |
| https://bugs.webkit.org/show_bug.cgi?id=184195 |
| |
| Reviewed by Saam Barati. |
| |
| This rolls out SecurityKind/SecurityOriginToken, but keeps the TLC infrastructure. It seems |
| to be a small speed-up. |
| |
| * CMakeLists.txt: |
| * JavaScriptCore.xcodeproj/project.pbxproj: |
| * Sources.txt: |
| * heap/BlockDirectory.cpp: |
| (JSC::BlockDirectory::findBlockForAllocation): |
| (JSC::BlockDirectory::addBlock): |
| * heap/BlockDirectory.h: |
| * heap/CellAttributes.cpp: |
| (JSC::CellAttributes::dump const): |
| * heap/CellAttributes.h: |
| (JSC::CellAttributes::CellAttributes): |
| * heap/LocalAllocator.cpp: |
| (JSC::LocalAllocator::allocateSlowCase): |
| (JSC::LocalAllocator::tryAllocateWithoutCollecting): |
| * heap/MarkedBlock.cpp: |
| (JSC::MarkedBlock::Handle::didAddToDirectory): |
| * heap/MarkedBlock.h: |
| (JSC::MarkedBlock::Handle::securityOriginToken const): Deleted. |
| * heap/SecurityKind.cpp: Removed. |
| * heap/SecurityKind.h: Removed. |
| * heap/SecurityOriginToken.cpp: Removed. |
| * heap/SecurityOriginToken.h: Removed. |
| * heap/ThreadLocalCache.cpp: |
| (JSC::ThreadLocalCache::create): |
| (JSC::ThreadLocalCache::ThreadLocalCache): |
| * heap/ThreadLocalCache.h: |
| (JSC::ThreadLocalCache::securityOriginToken const): Deleted. |
| * runtime/JSDestructibleObjectHeapCellType.cpp: |
| (JSC::JSDestructibleObjectHeapCellType::JSDestructibleObjectHeapCellType): |
| * runtime/JSGlobalObject.cpp: |
| (JSC::JSGlobalObject::JSGlobalObject): |
| * runtime/JSGlobalObject.h: |
| (JSC::JSGlobalObject::threadLocalCache const): Deleted. |
| * runtime/JSSegmentedVariableObjectHeapCellType.cpp: |
| (JSC::JSSegmentedVariableObjectHeapCellType::JSSegmentedVariableObjectHeapCellType): |
| * runtime/JSStringHeapCellType.cpp: |
| (JSC::JSStringHeapCellType::JSStringHeapCellType): |
| * runtime/VM.cpp: |
| (JSC::VM::VM): |
| * runtime/VM.h: |
| * runtime/VMEntryScope.cpp: |
| (JSC::VMEntryScope::VMEntryScope): |
| * wasm/js/JSWebAssemblyCodeBlockHeapCellType.cpp: |
| (JSC::JSWebAssemblyCodeBlockHeapCellType::JSWebAssemblyCodeBlockHeapCellType): |
| |
| 2018-04-02 Saam Barati <sbarati@apple.com> |
| |
| bmalloc should compute its own estimate of its footprint |
| https://bugs.webkit.org/show_bug.cgi?id=184121 |
| |
| Reviewed by Filip Pizlo. |
| |
| * heap/IsoAlignedMemoryAllocator.cpp: |
| (JSC::IsoAlignedMemoryAllocator::~IsoAlignedMemoryAllocator): |
| (JSC::IsoAlignedMemoryAllocator::tryAllocateAlignedMemory): |
| (JSC::IsoAlignedMemoryAllocator::freeAlignedMemory): |
| |
| 2018-04-02 Mark Lam <mark.lam@apple.com> |
| |
| We should not trash the stack pointer on OSR entry. |
| https://bugs.webkit.org/show_bug.cgi?id=184243 |
| <rdar://problem/39114319> |
| |
| Reviewed by Filip Pizlo. |
| |
| In the DFG OSR entry path, we momentarily over-write the stack pointer with |
| returnValueGPR2. returnValueGPR2 contains a pointer to a side buffer we malloc'ed. |
| Hence, this assignment is wrong, and it turns out to be unnecessary as well. |
| The stack pointer does get corrected later in the thunk (generated by |
| osrEntryThunkGenerator()) that we jump to. This is why we don't see ill-effects |
| so far. |
| |
| This bug only poses an issue if interrupts use the user stack for their stack |
| frame (e.g. linux), and when we do stack alignment tests during debugging. |
| |
| The fix is simply to remove the assignment. |
| |
| * dfg/DFGThunks.cpp: |
| (JSC::DFG::osrEntryThunkGenerator): |
| * jit/JIT.cpp: |
| (JSC::JIT::emitEnterOptimizationCheck): |
| |
| 2018-04-02 Stanislav Ocovaj <stanislav.ocovaj@rt-rk.com> |
| |
| [MIPS] Optimize JIT code generated by methods with TrustedImm32 operand |
| https://bugs.webkit.org/show_bug.cgi?id=183740 |
| |
| Reviewed by Yusuke Suzuki. |
| |
| In many macro assembler methods with TrustedImm32 operand a move imm, immTemp (pseudo)instruction is |
| first generated and a register operand variant of the same method is called to generate the rest |
| of the code. If the immediate value can fit in 16 bits then we can skip the move instruction and |
| generate more efficient code using MIPS instructions with immediate operand. |
| |
| * assembler/MIPSAssembler.h: |
| (JSC::MIPSAssembler::slti): |
| * assembler/MacroAssemblerMIPS.h: |
| (JSC::MacroAssemblerMIPS::lshift32): |
| (JSC::MacroAssemblerMIPS::xor32): |
| (JSC::MacroAssemblerMIPS::branch8): |
| (JSC::MacroAssemblerMIPS::compare8): |
| (JSC::MacroAssemblerMIPS::branch32): |
| (JSC::MacroAssemblerMIPS::branch32WithUnalignedHalfWords): |
| (JSC::MacroAssemblerMIPS::branchTest32): |
| (JSC::MacroAssemblerMIPS::mask8OnTest): |
| (JSC::MacroAssemblerMIPS::branchTest8): |
| (JSC::MacroAssemblerMIPS::branchAdd32): |
| (JSC::MacroAssemblerMIPS::branchNeg32): |
| (JSC::MacroAssemblerMIPS::compare32): |
| (JSC::MacroAssemblerMIPS::test8): |
| |
| 2018-04-02 Yusuke Suzuki <utatane.tea@gmail.com> |
| |
| [DFG] More aggressive removal of duplicate 32bit DFG code |
| https://bugs.webkit.org/show_bug.cgi?id=184089 |
| |
| Reviewed by Saam Barati. |
| |
| This patch more aggressively removes duplicate 32bit DFG code |
| by leveraging JSValueRegs and meta-programmed callOperation. |
| |
| * dfg/DFGSpeculativeJIT.cpp: |
| (JSC::DFG::SpeculativeJIT::compileGetByValWithThis): |
| (JSC::DFG::SpeculativeJIT::compileArithMinMax): |
| (JSC::DFG::SpeculativeJIT::compileNewArray): |
| (JSC::DFG::SpeculativeJIT::compileCheckCell): |
| (JSC::DFG::SpeculativeJIT::compileGetGlobalVariable): |
| (JSC::DFG::SpeculativeJIT::compilePutGlobalVariable): |
| (JSC::DFG::SpeculativeJIT::compileGetClosureVar): |
| (JSC::DFG::SpeculativeJIT::compilePutClosureVar): |
| (JSC::DFG::SpeculativeJIT::compileGetByOffset): |
| (JSC::DFG::SpeculativeJIT::compilePutByOffset): |
| (JSC::DFG::SpeculativeJIT::compileGetExecutable): |
| (JSC::DFG::SpeculativeJIT::compileNewArrayBuffer): |
| (JSC::DFG::SpeculativeJIT::compileToThis): |
| (JSC::DFG::SpeculativeJIT::compileIdentity): |
| * dfg/DFGSpeculativeJIT.h: |
| * dfg/DFGSpeculativeJIT32_64.cpp: |
| (JSC::DFG::SpeculativeJIT::compile): |
| * dfg/DFGSpeculativeJIT64.cpp: |
| (JSC::DFG::SpeculativeJIT::compile): |
| |
| 2018-04-01 Filip Pizlo <fpizlo@apple.com> |
| |
| Raise the for-call inlining threshold to 190 to fix JetStream/richards regression |
| https://bugs.webkit.org/show_bug.cgi?id=184228 |
| |
| Reviewed by Yusuke Suzuki. |
| |
| * runtime/Options.h: |
| |
| 2018-03-31 Filip Pizlo <fpizlo@apple.com> |
| |
| JSObject shouldn't do index masking |
| https://bugs.webkit.org/show_bug.cgi?id=184194 |
| |
| Reviewed by Yusuke Suzuki. |
| |
| Remove index masking, because it's not the way we'll mitigate Spectre. |
| |
| * API/tests/JSObjectGetProxyTargetTest.cpp: |
| (testJSObjectGetProxyTarget): |
| * b3/B3LowerToAir.cpp: |
| * b3/B3Validate.cpp: |
| * b3/B3WasmBoundsCheckValue.cpp: |
| (JSC::B3::WasmBoundsCheckValue::WasmBoundsCheckValue): |
| (JSC::B3::WasmBoundsCheckValue::dumpMeta const): |
| * b3/B3WasmBoundsCheckValue.h: |
| (JSC::B3::WasmBoundsCheckValue::bounds const): |
| (JSC::B3::WasmBoundsCheckValue::pinnedIndexingMask const): Deleted. |
| * b3/testb3.cpp: |
| (JSC::B3::testWasmBoundsCheck): |
| (JSC::B3::run): |
| * dfg/DFGAbstractInterpreterInlines.h: |
| (JSC::DFG::AbstractInterpreter<AbstractStateType>::executeEffects): |
| * dfg/DFGArgumentsEliminationPhase.cpp: |
| * dfg/DFGByteCodeParser.cpp: |
| (JSC::DFG::ByteCodeParser::parseBlock): |
| * dfg/DFGClobberize.h: |
| (JSC::DFG::clobberize): |
| * dfg/DFGDoesGC.cpp: |
| (JSC::DFG::doesGC): |
| * dfg/DFGFixupPhase.cpp: |
| (JSC::DFG::FixupPhase::fixupNode): |
| * dfg/DFGNodeType.h: |
| * dfg/DFGPredictionPropagationPhase.cpp: |
| * dfg/DFGSSALoweringPhase.cpp: |
| (JSC::DFG::SSALoweringPhase::handleNode): |
| * dfg/DFGSafeToExecute.h: |
| (JSC::DFG::safeToExecute): |
| * dfg/DFGSpeculativeJIT.cpp: |
| (JSC::DFG::SpeculativeJIT::SpeculativeJIT): |
| (JSC::DFG::SpeculativeJIT::emitAllocateRawObject): |
| (JSC::DFG::SpeculativeJIT::loadFromIntTypedArray): |
| (JSC::DFG::SpeculativeJIT::compileGetByValOnIntTypedArray): |
| (JSC::DFG::SpeculativeJIT::compileGetByValOnFloatTypedArray): |
| (JSC::DFG::SpeculativeJIT::compileNewFunctionCommon): |
| (JSC::DFG::SpeculativeJIT::compileCreateActivation): |
| (JSC::DFG::SpeculativeJIT::compileCreateDirectArguments): |
| (JSC::DFG::SpeculativeJIT::compileArraySlice): |
| (JSC::DFG::SpeculativeJIT::compileNewStringObject): |
| (JSC::DFG::SpeculativeJIT::compileNewTypedArrayWithSize): |
| (JSC::DFG::SpeculativeJIT::compileNewRegexp): |
| (JSC::DFG::SpeculativeJIT::compileCreateThis): |
| (JSC::DFG::SpeculativeJIT::compileNewObject): |
| * dfg/DFGSpeculativeJIT.h: |
| (JSC::DFG::SpeculativeJIT::emitAllocateJSObject): |
| (JSC::DFG::SpeculativeJIT::emitAllocateJSObjectWithKnownSize): |
| * dfg/DFGSpeculativeJIT32_64.cpp: |
| (JSC::DFG::SpeculativeJIT::compile): |
| (JSC::DFG::SpeculativeJIT::compileAllocateNewArrayWithSize): |
| * dfg/DFGSpeculativeJIT64.cpp: |
| (JSC::DFG::SpeculativeJIT::compile): |
| (JSC::DFG::SpeculativeJIT::compileAllocateNewArrayWithSize): |
| * ftl/FTLAbstractHeapRepository.h: |
| * ftl/FTLCapabilities.cpp: |
| (JSC::FTL::canCompile): |
| * ftl/FTLLowerDFGToB3.cpp: |
| (JSC::FTL::DFG::LowerDFGToB3::compileNode): |
| (JSC::FTL::DFG::LowerDFGToB3::compileAtomicsReadModifyWrite): |
| (JSC::FTL::DFG::LowerDFGToB3::compileGetByVal): |
| (JSC::FTL::DFG::LowerDFGToB3::compileCreateActivation): |
| (JSC::FTL::DFG::LowerDFGToB3::compileNewFunction): |
| (JSC::FTL::DFG::LowerDFGToB3::compileCreateDirectArguments): |
| (JSC::FTL::DFG::LowerDFGToB3::compileNewStringObject): |
| (JSC::FTL::DFG::LowerDFGToB3::compileNewTypedArray): |
| (JSC::FTL::DFG::LowerDFGToB3::compileMaterializeNewObject): |
| (JSC::FTL::DFG::LowerDFGToB3::compileMaterializeCreateActivation): |
| (JSC::FTL::DFG::LowerDFGToB3::compileNewRegexp): |
| (JSC::FTL::DFG::LowerDFGToB3::allocateObject): |
| (JSC::FTL::DFG::LowerDFGToB3::allocateVariableSizedObject): |
| (JSC::FTL::DFG::LowerDFGToB3::allocateJSArray): |
| (JSC::FTL::DFG::LowerDFGToB3::pointerIntoTypedArray): |
| (JSC::FTL::DFG::LowerDFGToB3::compileGetArrayMask): Deleted. |
| (JSC::FTL::DFG::LowerDFGToB3::maskedIndex): Deleted. |
| (JSC::FTL::DFG::LowerDFGToB3::computeButterflyIndexingMask): Deleted. |
| * jit/AssemblyHelpers.h: |
| (JSC::AssemblyHelpers::emitAllocateJSObject): |
| (JSC::AssemblyHelpers::emitAllocateJSObjectWithKnownSize): |
| (JSC::AssemblyHelpers::emitAllocateVariableSizedJSObject): |
| (JSC::AssemblyHelpers::emitAllocateDestructibleObject): |
| * jit/JITOpcodes.cpp: |
| (JSC::JIT::emit_op_new_object): |
| (JSC::JIT::emit_op_create_this): |
| * jit/JITOperations.cpp: |
| * jit/JITPropertyAccess.cpp: |
| (JSC::JIT::emitDoubleLoad): |
| (JSC::JIT::emitContiguousLoad): |
| (JSC::JIT::emitArrayStorageLoad): |
| * llint/LowLevelInterpreter32_64.asm: |
| * llint/LowLevelInterpreter64.asm: |
| * runtime/Butterfly.h: |
| (JSC::ContiguousData::at const): |
| (JSC::ContiguousData::at): |
| (JSC::Butterfly::computeIndexingMask const): Deleted. |
| * runtime/ButterflyInlines.h: |
| (JSC::ContiguousData<T>::at const): Deleted. |
| (JSC::ContiguousData<T>::at): Deleted. |
| * runtime/ClonedArguments.cpp: |
| (JSC::ClonedArguments::createEmpty): |
| * runtime/JSArray.cpp: |
| (JSC::JSArray::tryCreateUninitializedRestricted): |
| (JSC::JSArray::appendMemcpy): |
| (JSC::JSArray::setLength): |
| (JSC::JSArray::pop): |
| (JSC::JSArray::shiftCountWithAnyIndexingType): |
| (JSC::JSArray::unshiftCountWithAnyIndexingType): |
| (JSC::JSArray::fillArgList): |
| (JSC::JSArray::copyToArguments): |
| * runtime/JSArrayBufferView.cpp: |
| (JSC::JSArrayBufferView::JSArrayBufferView): |
| * runtime/JSArrayInlines.h: |
| (JSC::JSArray::pushInline): |
| * runtime/JSFixedArray.h: |
| * runtime/JSGenericTypedArrayViewInlines.h: |
| (JSC::JSGenericTypedArrayView<Adaptor>::slowDownAndWasteMemory): |
| * runtime/JSObject.cpp: |
| (JSC::JSObject::getOwnPropertySlotByIndex): |
| (JSC::JSObject::putByIndex): |
| (JSC::JSObject::createInitialUndecided): |
| (JSC::JSObject::createInitialInt32): |
| (JSC::JSObject::createInitialDouble): |
| (JSC::JSObject::createInitialContiguous): |
| (JSC::JSObject::createArrayStorage): |
| (JSC::JSObject::convertUndecidedToInt32): |
| (JSC::JSObject::convertUndecidedToDouble): |
| (JSC::JSObject::convertUndecidedToContiguous): |
| (JSC::JSObject::convertUndecidedToArrayStorage): |
| (JSC::JSObject::convertInt32ToDouble): |
| (JSC::JSObject::convertInt32ToArrayStorage): |
| (JSC::JSObject::convertDoubleToContiguous): |
| (JSC::JSObject::convertDoubleToArrayStorage): |
| (JSC::JSObject::convertContiguousToArrayStorage): |
| (JSC::JSObject::createInitialForValueAndSet): |
| (JSC::JSObject::deletePropertyByIndex): |
| (JSC::JSObject::getOwnPropertyNames): |
| (JSC::JSObject::putByIndexBeyondVectorLengthWithoutAttributes): |
| (JSC::JSObject::countElements): |
| (JSC::JSObject::increaseVectorLength): |
| (JSC::JSObject::ensureLengthSlow): |
| (JSC::JSObject::reallocateAndShrinkButterfly): |
| (JSC::JSObject::getEnumerableLength): |
| * runtime/JSObject.h: |
| (JSC::JSObject::canGetIndexQuickly): |
| (JSC::JSObject::getIndexQuickly): |
| (JSC::JSObject::tryGetIndexQuickly const): |
| (JSC::JSObject::setIndexQuickly): |
| (JSC::JSObject::initializeIndex): |
| (JSC::JSObject::initializeIndexWithoutBarrier): |
| (JSC::JSObject::butterflyOffset): |
| (JSC::JSObject::setButterfly): |
| (JSC::JSObject::nukeStructureAndSetButterfly): |
| (JSC::JSObject::JSObject): |
| (JSC::JSObject::butterflyIndexingMaskOffset): Deleted. |
| (JSC::JSObject::butterflyIndexingMask const): Deleted. |
| (JSC::JSObject::setButterflyWithIndexingMask): Deleted. |
| * runtime/JSObjectInlines.h: |
| (JSC::JSObject::prepareToPutDirectWithoutTransition): |
| (JSC::JSObject::putDirectInternal): |
| * runtime/RegExpMatchesArray.h: |
| (JSC::tryCreateUninitializedRegExpMatchesArray): |
| * runtime/Structure.cpp: |
| (JSC::Structure::flattenDictionaryStructure): |
| * wasm/WasmB3IRGenerator.cpp: |
| (JSC::Wasm::B3IRGenerator::B3IRGenerator): |
| (JSC::Wasm::B3IRGenerator::restoreWebAssemblyGlobalState): |
| (JSC::Wasm::B3IRGenerator::emitCheckAndPreparePointer): |
| (JSC::Wasm::B3IRGenerator::load): |
| (JSC::Wasm::B3IRGenerator::store): |
| (JSC::Wasm::B3IRGenerator::addCallIndirect): |
| * wasm/WasmBinding.cpp: |
| (JSC::Wasm::wasmToWasm): |
| * wasm/WasmInstance.h: |
| (JSC::Wasm::Instance::updateCachedMemory): |
| (JSC::Wasm::Instance::offsetOfCachedMemorySize): |
| (JSC::Wasm::Instance::offsetOfCachedIndexingMask): Deleted. |
| * wasm/WasmMemory.cpp: |
| (JSC::Wasm::Memory::Memory): |
| (JSC::Wasm::Memory::grow): |
| * wasm/WasmMemory.h: |
| (JSC::Wasm::Memory::size const): |
| (JSC::Wasm::Memory::offsetOfSize): |
| (JSC::Wasm::Memory::indexingMask): Deleted. |
| (JSC::Wasm::Memory::offsetOfIndexingMask): Deleted. |
| * wasm/WasmMemoryInformation.cpp: |
| (JSC::Wasm::PinnedRegisterInfo::get): |
| (JSC::Wasm::PinnedRegisterInfo::PinnedRegisterInfo): |
| * wasm/WasmMemoryInformation.h: |
| (JSC::Wasm::PinnedRegisterInfo::toSave const): |
| * wasm/js/JSToWasm.cpp: |
| (JSC::Wasm::createJSToWasmWrapper): |
| |
| 2018-03-31 Filip Pizlo <fpizlo@apple.com> |
| |
| JSC crash in JIT code with for-of loop and Array/Set iterators |
| https://bugs.webkit.org/show_bug.cgi?id=183174 |
| |
| Reviewed by Saam Barati. |
| |
| * dfg/DFGSafeToExecute.h: |
| (JSC::DFG::safeToExecute): Fix the bug by making GetByOffset and friends verify that they are getting the type proof they want at the desired hoisting site. |
| |
| 2018-03-30 Filip Pizlo <fpizlo@apple.com> |
| |
| Strings and Vectors shouldn't do index masking |
| https://bugs.webkit.org/show_bug.cgi?id=184193 |
| |
| Reviewed by Mark Lam. |
| |
| * dfg/DFGSpeculativeJIT.cpp: |
| (JSC::DFG::SpeculativeJIT::compileGetCharCodeAt): |
| (JSC::DFG::SpeculativeJIT::compileGetByValOnString): |
| * ftl/FTLAbstractHeapRepository.h: |
| * ftl/FTLLowerDFGToB3.cpp: |
| (JSC::FTL::DFG::LowerDFGToB3::compileStringCharAt): |
| (JSC::FTL::DFG::LowerDFGToB3::compileStringCharCodeAt): |
| * jit/ThunkGenerators.cpp: |
| (JSC::stringCharLoad): |
| |
| 2018-03-30 Mark Lam <mark.lam@apple.com> |
| |
| Add pointer profiling support in baseline JIT and supporting files. |
| https://bugs.webkit.org/show_bug.cgi?id=184200 |
| <rdar://problem/39057300> |
| |
| Reviewed by Filip Pizlo. |
| |
| 1. To simplify pointer profiling support, vmEntryToJavaScript() now always enters |
| the code via the arity check entry. |
| 2. To accommodate (1), all JITCode must now populate their arity check entry code |
| pointers as well. For native code, programs, evals, and modules that don't |
| do arity check, we set the normal entry as the arity check entry (though with |
| the CodeEntryWithArityCheckPtrTag profile instead). |
| |
| * assembler/AbstractMacroAssembler.h: |
| * assembler/LinkBuffer.h: |
| (JSC::LinkBuffer::locationOfNearCall): |
| * assembler/MacroAssemblerARM64.h: |
| (JSC::MacroAssemblerARM64::readCallTarget): |
| (JSC::MacroAssemblerARM64::linkCall): |
| * bytecode/AccessCase.cpp: |
| (JSC::AccessCase::generateImpl): |
| * bytecode/AccessCaseSnippetParams.cpp: |
| (JSC::SlowPathCallGeneratorWithArguments::generateImpl): |
| * bytecode/CodeBlock.cpp: |
| (JSC::CodeBlock::addJITAddIC): |
| (JSC::CodeBlock::addJITMulIC): |
| (JSC::CodeBlock::addJITSubIC): |
| (JSC::CodeBlock::addJITNegIC): |
| * bytecode/CodeBlock.h: |
| (JSC::CodeBlock::addMathIC): |
| * bytecode/InlineAccess.cpp: |
| (JSC::InlineAccess::rewireStubAsJump): |
| * bytecode/LLIntCallLinkInfo.h: |
| (JSC::LLIntCallLinkInfo::unlink): |
| (): Deleted. |
| * bytecode/PolymorphicAccess.cpp: |
| (JSC::AccessGenerationState::emitExplicitExceptionHandler): |
| (JSC::PolymorphicAccess::regenerate): |
| * dfg/DFGJITFinalizer.cpp: |
| (JSC::DFG::JITFinalizer::finalize): |
| (JSC::DFG::JITFinalizer::finalizeFunction): |
| * dfg/DFGSpeculativeJIT.cpp: |
| (JSC::DFG::SpeculativeJIT::compileValueAdd): |
| (JSC::DFG::SpeculativeJIT::compileArithSub): |
| (JSC::DFG::SpeculativeJIT::compileArithNegate): |
| (JSC::DFG::SpeculativeJIT::compileArithMul): |
| (JSC::DFG::SpeculativeJIT::emitSwitchIntJump): |
| (JSC::DFG::SpeculativeJIT::emitSwitchImm): |
| (JSC::DFG::SpeculativeJIT::emitSwitchStringOnString): |
| * disassembler/ARM64Disassembler.cpp: |
| (JSC::tryToDisassemble): |
| * ftl/FTLJITFinalizer.cpp: |
| (JSC::FTL::JITFinalizer::finalizeCommon): |
| * ftl/FTLLowerDFGToB3.cpp: |
| (JSC::FTL::DFG::LowerDFGToB3::compileValueAdd): |
| (JSC::FTL::DFG::LowerDFGToB3::compileUnaryMathIC): |
| (JSC::FTL::DFG::LowerDFGToB3::compileBinaryMathIC): |
| (JSC::FTL::DFG::LowerDFGToB3::compileArithAddOrSub): |
| (JSC::FTL::DFG::LowerDFGToB3::compileArithMul): |
| (JSC::FTL::DFG::LowerDFGToB3::compileArithNegate): |
| * heap/JITStubRoutineSet.h: |
| (JSC::JITStubRoutineSet::mark): |
| * jit/AssemblyHelpers.cpp: |
| (JSC::AssemblyHelpers::callExceptionFuzz): |
| (JSC::AssemblyHelpers::debugCall): |
| * jit/AssemblyHelpers.h: |
| (JSC::AssemblyHelpers::emitFunctionPrologue): |
| * jit/CCallHelpers.cpp: |
| (JSC::CCallHelpers::ensureShadowChickenPacket): |
| * jit/CCallHelpers.h: |
| (JSC::CCallHelpers::prepareForTailCallSlow): |
| * jit/CallFrameShuffler.cpp: |
| (JSC::CallFrameShuffler::prepareForTailCall): |
| * jit/ExecutableAllocator.cpp: |
| (JSC::FixedVMPoolExecutableAllocator::jitWriteThunkGenerator): |
| * jit/ExecutableAllocator.h: |
| (JSC::performJITMemcpy): |
| * jit/JIT.cpp: |
| (JSC::JIT::compileWithoutLinking): |
| (JSC::JIT::link): |
| * jit/JITArithmetic.cpp: |
| (JSC::JIT::emit_op_negate): |
| (JSC::JIT::emit_op_add): |
| (JSC::JIT::emitMathICFast): |
| (JSC::JIT::emitMathICSlow): |
| (JSC::JIT::emit_op_mul): |
| (JSC::JIT::emit_op_sub): |
| * jit/JITCode.cpp: |
| (JSC::JITCode::execute): |
| (JSC::JITCodeWithCodeRef::executableAddressAtOffset): |
| (JSC::DirectJITCode::DirectJITCode): |
| (JSC::DirectJITCode::initializeCodeRef): |
| (JSC::NativeJITCode::addressForCall): |
| * jit/JITExceptions.cpp: |
| (JSC::genericUnwind): |
| * jit/JITMathIC.h: |
| (JSC::isProfileEmpty): |
| (JSC::JITBinaryMathIC::JITBinaryMathIC): |
| (JSC::JITUnaryMathIC::JITUnaryMathIC): |
| * jit/JITOpcodes.cpp: |
| (JSC::JIT::emit_op_switch_imm): |
| (JSC::JIT::emit_op_switch_char): |
| (JSC::JIT::emit_op_switch_string): |
| (JSC::JIT::privateCompileHasIndexedProperty): |
| (JSC::JIT::emitSlow_op_has_indexed_property): |
| * jit/JITOpcodes32_64.cpp: |
| (JSC::JIT::privateCompileHasIndexedProperty): |
| * jit/JITOperations.cpp: |
| (JSC::getByVal): |
| (JSC::tryGetByValOptimize): |
| * jit/JITPropertyAccess.cpp: |
| (JSC::JIT::stringGetByValStubGenerator): |
| (JSC::JIT::emitGetByValWithCachedId): |
| (JSC::JIT::emitSlow_op_get_by_val): |
| (JSC::JIT::emitPutByValWithCachedId): |
| (JSC::JIT::emitSlow_op_put_by_val): |
| (JSC::JIT::emitSlow_op_try_get_by_id): |
| (JSC::JIT::emitSlow_op_get_by_id): |
| (JSC::JIT::emitSlow_op_get_by_id_with_this): |
| (JSC::JIT::emitSlow_op_put_by_id): |
| (JSC::JIT::privateCompileGetByVal): |
| (JSC::JIT::privateCompileGetByValWithCachedId): |
| (JSC::JIT::privateCompilePutByVal): |
| (JSC::JIT::privateCompilePutByValWithCachedId): |
| * jit/JITThunks.cpp: |
| (JSC::JITThunks::hostFunctionStub): |
| * jit/Repatch.cpp: |
| (JSC::tryCacheGetByID): |
| (JSC::repatchGetByID): |
| (JSC::appropriateOptimizingPutByIdFunction): |
| (JSC::tryCachePutByID): |
| (JSC::repatchPutByID): |
| (JSC::linkFor): |
| (JSC::revertCall): |
| (JSC::linkPolymorphicCall): |
| (JSC::resetGetByID): |
| (JSC::resetPutByID): |
| * jit/Repatch.h: |
| * jit/SpecializedThunkJIT.h: |
| (JSC::SpecializedThunkJIT::finalize): |
| (JSC::SpecializedThunkJIT::callDoubleToDouble): |
| * jit/ThunkGenerators.cpp: |
| (JSC::emitPointerValidation): |
| (JSC::throwExceptionFromCallSlowPathGenerator): |
| (JSC::slowPathFor): |
| (JSC::linkCallThunkGenerator): Deleted. |
| (JSC::linkPolymorphicCallThunkGenerator): Deleted. |
| (JSC::virtualThunkFor): Deleted. |
| (JSC::nativeForGenerator): Deleted. |
| (JSC::nativeCallGenerator): Deleted. |
| (JSC::nativeTailCallGenerator): Deleted. |
| (JSC::nativeTailCallWithoutSavedTagsGenerator): Deleted. |
| (JSC::nativeConstructGenerator): Deleted. |
| (JSC::internalFunctionCallGenerator): Deleted. |
| (JSC::internalFunctionConstructGenerator): Deleted. |
| (JSC::arityFixupGenerator): Deleted. |
| (JSC::unreachableGenerator): Deleted. |
| (JSC::stringCharLoad): Deleted. |
| (JSC::charToString): Deleted. |
| (JSC::charCodeAtThunkGenerator): Deleted. |
| (JSC::charAtThunkGenerator): Deleted. |
| (JSC::fromCharCodeThunkGenerator): Deleted. |
| (JSC::clz32ThunkGenerator): Deleted. |
| (JSC::sqrtThunkGenerator): Deleted. |
| (JSC::floorThunkGenerator): Deleted. |
| (JSC::ceilThunkGenerator): Deleted. |
| (JSC::truncThunkGenerator): Deleted. |
| (JSC::roundThunkGenerator): Deleted. |
| (JSC::expThunkGenerator): Deleted. |
| (JSC::logThunkGenerator): Deleted. |
| (JSC::absThunkGenerator): Deleted. |
| (JSC::imulThunkGenerator): Deleted. |
| (JSC::randomThunkGenerator): Deleted. |
| (JSC::boundThisNoArgsFunctionCallGenerator): Deleted. |
| * llint/LLIntData.cpp: |
| (JSC::LLInt::initialize): |
| * llint/LLIntData.h: |
| (JSC::LLInt::getCodePtr): |
| * llint/LLIntEntrypoint.cpp: |
| (JSC::LLInt::setEvalEntrypoint): |
| (JSC::LLInt::setProgramEntrypoint): |
| (JSC::LLInt::setModuleProgramEntrypoint): |
| * llint/LLIntSlowPaths.cpp: |
| (JSC::LLInt::setUpCall): |
| * llint/LLIntThunks.cpp: |
| (JSC::LLInt::generateThunkWithJumpTo): |
| * llint/LowLevelInterpreter.asm: |
| * llint/LowLevelInterpreter32_64.asm: |
| * llint/LowLevelInterpreter64.asm: |
| * runtime/ExecutableBase.h: |
| * runtime/NativeExecutable.cpp: |
| (JSC::NativeExecutable::finishCreation): |
| * runtime/NativeFunction.h: |
| (JSC::TaggedNativeFunction::TaggedNativeFunction): |
| (JSC::TaggedNativeFunction::operator NativeFunction): |
| * runtime/PropertySlot.h: |
| (JSC::PropertySlot::setCustom): |
| (JSC::PropertySlot::setCacheableCustom): |
| * runtime/PtrTag.h: |
| * runtime/PutPropertySlot.h: |
| (JSC::PutPropertySlot::setCustomValue): |
| (JSC::PutPropertySlot::setCustomAccessor): |
| * runtime/SamplingProfiler.cpp: |
| (JSC::SamplingProfiler::takeSample): |
| * runtime/VMTraps.cpp: |
| (JSC::SignalContext::SignalContext): |
| (JSC::VMTraps::tryInstallTrapBreakpoints): |
| * tools/SigillCrashAnalyzer.cpp: |
| (JSC::installCrashHandler): |
| * yarr/YarrJIT.cpp: |
| (JSC::Yarr::YarrGenerator::generateTryReadUnicodeCharacterHelper): |
| (JSC::Yarr::YarrGenerator::generateEnter): |
| |
| 2018-03-30 Devin Rousso <webkit@devinrousso.com> |
| |
| Web Inspector: tint all pixels drawn by shader program when hovering ShaderProgramTreeElement |
| https://bugs.webkit.org/show_bug.cgi?id=175223 |
| |
| Reviewed by Matt Baker. |
| |
| * inspector/protocol/Canvas.json: |
| Add `setShaderProgramHighlighted` command that will cause a blend to be applied to the |
| canvas if the given shader program is active immediately before `drawArrays` or `drawElements` |
| is called. The blend is removed and the previous value is applied once the draw is complete. |
| |
| 2018-03-30 JF Bastien <jfbastien@apple.com> |
| |
| WebAssembly: support DataView compilation |
| https://bugs.webkit.org/show_bug.cgi?id=183342 |
| |
| Reviewed by Mark Lam. |
| |
| Compiling a module from a DataView was incorrectly dealing with |
| DataView's offset. |
| |
| * wasm/WasmModuleParser.cpp: |
| (JSC::Wasm::ModuleParser::parse): |
| * wasm/js/JSWebAssemblyHelpers.h: |
| (JSC::getWasmBufferFromValue): |
| (JSC::createSourceBufferFromValue): |
| * wasm/js/WebAssemblyPrototype.cpp: |
| (JSC::webAssemblyValidateFunc): |
| |
| 2018-03-30 Filip Pizlo <fpizlo@apple.com> |
| |
| Bytecode generator should not get_from_scope something that may be a hole into a variable that is already live |
| https://bugs.webkit.org/show_bug.cgi?id=184189 |
| |
| Reviewed by JF Bastien. |
| |
| * bytecompiler/NodesCodegen.cpp: |
| (JSC::ResolveNode::emitBytecode): |
| |
| 2018-03-30 Mark Lam <mark.lam@apple.com> |
| |
| Add pointer profiling support to Wasm. |
| https://bugs.webkit.org/show_bug.cgi?id=184175 |
| <rdar://problem/39027923> |
| |
| Reviewed by JF Bastien. |
| |
| * runtime/PtrTag.h: |
| * wasm/WasmB3IRGenerator.cpp: |
| (JSC::Wasm::B3IRGenerator::addGrowMemory): |
| (JSC::Wasm::B3IRGenerator::addCall): |
| (JSC::Wasm::B3IRGenerator::addCallIndirect): |
| (JSC::Wasm::B3IRGenerator::addOp<OpType::I32Popcnt>): |
| (JSC::Wasm::B3IRGenerator::addOp<OpType::I64Popcnt>): |
| * wasm/WasmBBQPlan.cpp: |
| (JSC::Wasm::BBQPlan::prepare): |
| (JSC::Wasm::BBQPlan::complete): |
| * wasm/WasmBinding.cpp: |
| (JSC::Wasm::wasmToWasm): |
| * wasm/WasmBinding.h: |
| * wasm/WasmFaultSignalHandler.cpp: |
| (JSC::Wasm::trapHandler): |
| * wasm/WasmOMGPlan.cpp: |
| (JSC::Wasm::OMGPlan::work): |
| * wasm/WasmThunks.cpp: |
| (JSC::Wasm::throwExceptionFromWasmThunkGenerator): |
| (JSC::Wasm::throwStackOverflowFromWasmThunkGenerator): |
| (JSC::Wasm::triggerOMGTierUpThunkGenerator): |
| * wasm/js/WasmToJS.cpp: |
| (JSC::Wasm::handleBadI64Use): |
| (JSC::Wasm::wasmToJS): |
| * wasm/js/WebAssemblyFunction.cpp: |
| (JSC::callWebAssemblyFunction): |
| * wasm/js/WebAssemblyFunction.h: |
| |
| 2018-03-30 Ryan Haddad <ryanhaddad@apple.com> |
| |
| Unreviewed, rolling out r230102. |
| |
| Caused assertion failures on JSC bots. |
| |
| Reverted changeset: |
| |
| "A stack overflow in the parsing of a builtin (called by |
| createExecutable) cause a crash instead of a catchable js |
| exception" |
| https://bugs.webkit.org/show_bug.cgi?id=184074 |
| https://trac.webkit.org/changeset/230102 |
| |
| 2018-03-30 Robin Morisset <rmorisset@apple.com> |
| |
| Inlining of a function that ends in op_unreachable in a non-tail position triggers an ASSERT |
| https://bugs.webkit.org/show_bug.cgi?id=183812 |
| |
| Reviewed by Keith Miller. |
| |
| The fix I landed for https://bugs.webkit.org/show_bug.cgi?id=181027 was flawed: I tried setting the bytecodeIndex for the new block on line 1679 (at the end of inlineCall), but it is going to be reset on line 6612 (in parseCodeBlock). |
| The fix is simply to make the block untargetable by default, and let parseCodeBlock make it targetable afterwards if it is a jump target. |
| |
| * dfg/DFGByteCodeParser.cpp: |
| (JSC::DFG::ByteCodeParser::allocateTargetableBlock): |
| (JSC::DFG::ByteCodeParser::inlineCall): |
| |
| 2018-03-30 Robin Morisset <rmorisset@apple.com> |
| |
| A stack overflow in the parsing of a builtin (called by createExecutable) cause a crash instead of a catchable js exception |
| https://bugs.webkit.org/show_bug.cgi?id=184074 |
| <rdar://problem/37165897> |
| |
| Reviewed by Keith Miller. |
| |
| Fixing this requires getting the ParserError (with information about the failure) and an ExecState* (to throw an exception) in the same place. |
| It is surprisingly painful, with quite a long call stack between the last function with an access to an ExecState* and the first function with the ParserError. |
| Even worse, many of these functions are generated by macros, themselves generated by a maze of python scripts. |
| As a result, this patch is grotesquely large, while all it does is adding enough plumbing to throw a proper exception in this specific case. |
| |
| There are now bare calls to '.value()' on several paths that may crash. It is not a problem in my opinion, since we previously crashed in every case regardless of the path that took us to createExecutable when encountering a stack overflow. |
| If we ever find an example that can cause these calls to fail, it should be doable to throw a proper exception there too. |
| |
| Two other minor changes: |
| - I removed BuiltinExecutableCreator.{cpp, h} as it was nearly empty, and only used in one place. That place now includes BuiltinExecutables.h directly instead. |
| - I moved code from ParserError.h into a newly created ParserError.cpp, as I see no need to inline functions that are only used when encountering a parser error, and ParserError.h is now included in quite a few places. |
| |
| * JavaScriptCore.xcodeproj/project.pbxproj: |
| * Scripts/builtins/builtins_generate_combined_header.py: |
| (BuiltinsCombinedHeaderGenerator.generate_forward_declarations): |
| (ParserError): |
| (generate_section_for_object): Deleted. |
| (generate_externs_for_object): Deleted. |
| (generate_macros_for_object): Deleted. |
| (generate_section_for_code_table_macro): Deleted. |
| (generate_section_for_code_name_macro): Deleted. |
| (generate_section_for_global_private_code_name_macro): Deleted. |
| * Scripts/builtins/builtins_generate_separate_header.py: |
| (generate_secondary_header_includes): |
| * Scripts/builtins/builtins_templates.py: |
| * Sources.txt: |
| * builtins/BuiltinExecutableCreator.cpp: Removed. |
| * builtins/BuiltinExecutableCreator.h: Removed. |
| * builtins/BuiltinExecutables.cpp: |
| (JSC::BuiltinExecutables::createDefaultConstructor): |
| (JSC::BuiltinExecutables::createBuiltinExecutable): |
| (JSC::createBuiltinExecutable): |
| (JSC::BuiltinExecutables::createExecutableOrCrash): |
| (JSC::BuiltinExecutables::createExecutable): |
| * builtins/BuiltinExecutables.h: |
| * bytecompiler/BytecodeGenerator.h: |
| * parser/ParserError.cpp: Added. |
| (JSC::ParserError::toErrorObject): |
| (JSC::ParserError::throwStackOverflowOrOutOfMemory): |
| (WTF::printInternal): |
| * parser/ParserError.h: |
| (JSC::ParserError::toErrorObject): Deleted. |
| (WTF::printInternal): Deleted. |
| * runtime/AsyncIteratorPrototype.cpp: |
| (JSC::AsyncIteratorPrototype::finishCreation): |
| * runtime/FunctionPrototype.cpp: |
| (JSC::FunctionPrototype::addFunctionProperties): |
| * runtime/JSGlobalObject.cpp: |
| (JSC::JSGlobalObject::init): |
| * runtime/JSObject.cpp: |
| (JSC::JSObject::getOwnStaticPropertySlot): |
| (JSC::JSObject::reifyAllStaticProperties): |
| * runtime/JSObject.h: |
| (JSC::JSObject::getOwnNonIndexPropertySlot): |
| (JSC::JSObject::getOwnPropertySlot): |
| (JSC::JSObject::getPropertySlot): |
| * runtime/JSObjectInlines.h: |
| (JSC::JSObject::getNonIndexPropertySlot): |
| * runtime/JSTypedArrayViewPrototype.cpp: |
| (JSC::JSTypedArrayViewPrototype::finishCreation): |
| * runtime/Lookup.cpp: |
| (JSC::reifyStaticAccessor): |
| (JSC::setUpStaticFunctionSlot): |
| * runtime/Lookup.h: |
| (JSC::getStaticPropertySlotFromTable): |
| (JSC::reifyStaticProperty): |
| * runtime/MapPrototype.cpp: |
| (JSC::MapPrototype::finishCreation): |
| * runtime/SetPrototype.cpp: |
| (JSC::SetPrototype::finishCreation): |
| * tools/JSDollarVM.cpp: |
| (JSC::functionCreateBuiltin): |
| |
| 2018-03-30 Robin Morisset <rmorisset@apple.com> |
| |
| Out-of-bounds accesses due to a missing check for MAX_STORAGE_VECTOR_LENGTH in unshiftCountForAnyIndexingType |
| https://bugs.webkit.org/show_bug.cgi?id=183657 |
| <rdar://problem/38464399> |
| |
| Reviewed by Keith Miller. |
| |
| There was just a missing check in unshiftCountForIndexingType. |
| I've also replaced 'return false' by 'return true' in the case of an 'out-of-memory' exception, because 'return false' means 'please continue to the slow path', |
| and the slow path has an assert that there is no unhandled exception (line 360 of ArrayPrototype.cpp). |
| Finally, I made the assert in ensureLength a release assert as it would have caught this bug and prevented it from being a security risk. |
| |
| * runtime/ArrayPrototype.cpp: |
| (JSC::unshift): |
| * runtime/JSArray.cpp: |
| (JSC::JSArray::unshiftCountWithAnyIndexingType): |
| * runtime/JSObject.h: |
| (JSC::JSObject::ensureLength): |
| |
| 2018-03-29 Mark Lam <mark.lam@apple.com> |
| |
| Add some pointer profiling support to B3 and Air. |
| https://bugs.webkit.org/show_bug.cgi?id=184165 |
| <rdar://problem/39022125> |
| |
| Reviewed by JF Bastien. |
| |
| * b3/B3LowerMacros.cpp: |
| * b3/B3LowerMacrosAfterOptimizations.cpp: |
| * b3/B3MathExtras.cpp: |
| * b3/B3ReduceStrength.cpp: |
| * b3/air/AirCCallSpecial.cpp: |
| (JSC::B3::Air::CCallSpecial::generate): |
| * b3/air/AirCCallSpecial.h: |
| * b3/testb3.cpp: |
| (JSC::B3::testCallSimple): |
| (JSC::B3::testCallRare): |
| (JSC::B3::testCallRareLive): |
| (JSC::B3::testCallSimplePure): |
| (JSC::B3::testCallFunctionWithHellaArguments): |
| (JSC::B3::testCallFunctionWithHellaArguments2): |
| (JSC::B3::testCallFunctionWithHellaArguments3): |
| (JSC::B3::testCallSimpleDouble): |
| (JSC::B3::testCallSimpleFloat): |
| (JSC::B3::testCallFunctionWithHellaDoubleArguments): |
| (JSC::B3::testCallFunctionWithHellaFloatArguments): |
| (JSC::B3::testLinearScanWithCalleeOnStack): |
| (JSC::B3::testInterpreter): |
| (JSC::B3::testLICMPure): |
| (JSC::B3::testLICMPureSideExits): |
| (JSC::B3::testLICMPureWritesPinned): |
| (JSC::B3::testLICMPureWrites): |
| (JSC::B3::testLICMReadsLocalState): |
| (JSC::B3::testLICMReadsPinned): |
| (JSC::B3::testLICMReads): |
| (JSC::B3::testLICMPureNotBackwardsDominant): |
| (JSC::B3::testLICMPureFoiledByChild): |
| (JSC::B3::testLICMPureNotBackwardsDominantFoiledByChild): |
| (JSC::B3::testLICMExitsSideways): |
| (JSC::B3::testLICMWritesLocalState): |
| (JSC::B3::testLICMWrites): |
| (JSC::B3::testLICMFence): |
| (JSC::B3::testLICMWritesPinned): |
| (JSC::B3::testLICMControlDependent): |
| (JSC::B3::testLICMControlDependentNotBackwardsDominant): |
| (JSC::B3::testLICMControlDependentSideExits): |
| (JSC::B3::testLICMReadsPinnedWritesPinned): |
| (JSC::B3::testLICMReadsWritesDifferentHeaps): |
| (JSC::B3::testLICMReadsWritesOverlappingHeaps): |
| (JSC::B3::testLICMDefaultCall): |
| (JSC::B3::testShuffleDoesntTrashCalleeSaves): |
| * ftl/FTLLowerDFGToB3.cpp: |
| (JSC::FTL::DFG::LowerDFGToB3::compileCallOrConstructVarargsSpread): |
| (JSC::FTL::DFG::LowerDFGToB3::compileCallOrConstructVarargs): |
| (JSC::FTL::DFG::LowerDFGToB3::compileCallEval): |
| * jit/GPRInfo.h: |
| * runtime/PtrTag.h: |
| * wasm/WasmBinding.cpp: |
| (JSC::Wasm::wasmToWasm): |
| |
| 2018-03-29 JF Bastien <jfbastien@apple.com> |
| |
| Use Forward.h instead of forward-declaring WTF::String |
| https://bugs.webkit.org/show_bug.cgi?id=184172 |
| <rdar://problem/39026146> |
| |
| Reviewed by Yusuke Suzuki. |
| |
| As part of #184164 I'm changing WTF::String, and the forward |
| declarations are just wrong because I'm making it templated. We |
| should use Forward.h anyways, so do that instead. |
| |
| * runtime/DateConversion.h: |
| |
| 2018-03-29 Mark Lam <mark.lam@apple.com> |
| |
| Use MacroAssemblerCodePtr in Wasm code for code pointers instead of void*. |
| https://bugs.webkit.org/show_bug.cgi?id=184163 |
| <rdar://problem/39020397> |
| |
| Reviewed by JF Bastien. |
| |
| With the use of MacroAssemblerCodePtr, we now get poisoning for Wasm code pointers. |
| |
| Also renamed some structs, methods, and variable names to be more accurate. |
| Previously, there is some confusion between a code pointer and the address of a |
| code pointer (sometimes referred to in the code as a "LoadLocation"). We now name |
| the LoadLocation variables appropriately to distinguish them from code pointers. |
| |
| * wasm/WasmB3IRGenerator.cpp: |
| (JSC::Wasm::B3IRGenerator::addCall): |
| (JSC::Wasm::B3IRGenerator::addCallIndirect): |
| * wasm/WasmBinding.cpp: |
| (JSC::Wasm::wasmToWasm): |
| * wasm/WasmCodeBlock.cpp: |
| (JSC::Wasm::CodeBlock::CodeBlock): |
| * wasm/WasmCodeBlock.h: |
| (JSC::Wasm::CodeBlock::entrypointLoadLocationFromFunctionIndexSpace): |
| (JSC::Wasm::CodeBlock::wasmEntrypointLoadLocationFromFunctionIndexSpace): Deleted. |
| * wasm/WasmFormat.h: |
| (JSC::Wasm::WasmToWasmImportableFunction::WasmToWasmImportableFunction): |
| (JSC::Wasm::WasmToWasmImportableFunction::offsetOfEntrypointLoadLocation): |
| (JSC::Wasm::CallableFunction::CallableFunction): Deleted. |
| (JSC::Wasm::CallableFunction::offsetOfWasmEntrypointLoadLocation): Deleted. |
| * wasm/WasmInstance.h: |
| (JSC::Wasm::Instance::offsetOfWasmEntrypointLoadLocation): |
| (JSC::Wasm::Instance::offsetOfWasmToEmbedderStub): |
| (JSC::Wasm::Instance::offsetOfWasmEntrypoint): Deleted. |
| (JSC::Wasm::Instance::offsetOfWasmToEmbedderStubExecutableAddress): Deleted. |
| * wasm/WasmOMGPlan.cpp: |
| (JSC::Wasm::OMGPlan::work): |
| * wasm/WasmTable.cpp: |
| (JSC::Wasm::Table::Table): |
| (JSC::Wasm::Table::grow): |
| (JSC::Wasm::Table::clearFunction): |
| (JSC::Wasm::Table::setFunction): |
| * wasm/WasmTable.h: |
| (JSC::Wasm::Table::offsetOfFunctions): |
| * wasm/js/JSWebAssemblyCodeBlock.h: |
| * wasm/js/JSWebAssemblyInstance.cpp: |
| (JSC::JSWebAssemblyInstance::finalizeCreation): |
| (JSC::JSWebAssemblyInstance::create): |
| * wasm/js/JSWebAssemblyTable.cpp: |
| (JSC::JSWebAssemblyTable::setFunction): |
| * wasm/js/WebAssemblyFunction.cpp: |
| (JSC::WebAssemblyFunction::create): |
| (JSC::WebAssemblyFunction::WebAssemblyFunction): |
| * wasm/js/WebAssemblyFunction.h: |
| * wasm/js/WebAssemblyModuleRecord.cpp: |
| (JSC::WebAssemblyModuleRecord::link): |
| (JSC::WebAssemblyModuleRecord::evaluate): |
| * wasm/js/WebAssemblyWrapperFunction.cpp: |
| (JSC::WebAssemblyWrapperFunction::WebAssemblyWrapperFunction): |
| (JSC::WebAssemblyWrapperFunction::create): |
| * wasm/js/WebAssemblyWrapperFunction.h: |
| |
| 2018-03-29 Yusuke Suzuki <utatane.tea@gmail.com> |
| |
| Remove WTF_EXPORTDATA and JS_EXPORTDATA |
| https://bugs.webkit.org/show_bug.cgi?id=184170 |
| |
| Reviewed by JF Bastien. |
| |
| Replace WTF_EXPORTDATA and JS_EXPORTDATA with |
| WTF_EXPORT_PRIVATE and JS_EXPORT_PRIVATE respectively. |
| |
| * heap/WriteBarrierSupport.h: |
| * jit/ExecutableAllocator.cpp: |
| * jit/ExecutableAllocator.h: |
| * runtime/JSCPoison.h: |
| * runtime/JSCell.h: |
| * runtime/JSExportMacros.h: |
| * runtime/JSGlobalObject.h: |
| * runtime/JSObject.h: |
| * runtime/Options.h: |
| * runtime/PropertyDescriptor.h: |
| * runtime/PropertyMapHashTable.h: |
| * runtime/SamplingCounter.h: |
| |
| 2018-03-29 Ross Kirsling <ross.kirsling@sony.com> |
| |
| MSVC __forceinline slows down JSC release build fivefold after r229391 |
| https://bugs.webkit.org/show_bug.cgi?id=184062 |
| |
| Reviewed by Alex Christensen. |
| |
| * jit/CCallHelpers.h: |
| (JSC::CCallHelpers::marshallArgumentRegister): |
| Exempt MSVC from a single forced inline used within recursive templates. |
| |
| 2018-03-29 Keith Miller <keith_miller@apple.com> |
| |
| ArrayMode should not try to get the DFG to think it can convert TypedArrays |
| https://bugs.webkit.org/show_bug.cgi?id=184137 |
| |
| Reviewed by Saam Barati. |
| |
| * dfg/DFGArrayMode.cpp: |
| (JSC::DFG::ArrayMode::fromObserved): |
| |
| 2018-03-29 Commit Queue <commit-queue@webkit.org> |
| |
| Unreviewed, rolling out r230062. |
| https://bugs.webkit.org/show_bug.cgi?id=184128 |
| |
| Broke mac port. web content process crashes while loading any |
| web page (Requested by rniwa on #webkit). |
| |
| Reverted changeset: |
| |
| "MSVC __forceinline slows down JSC release build fivefold |
| after r229391" |
| https://bugs.webkit.org/show_bug.cgi?id=184062 |
| https://trac.webkit.org/changeset/230062 |
| |
| 2018-03-28 Ross Kirsling <ross.kirsling@sony.com> |
| |
| MSVC __forceinline slows down JSC release build fivefold after r229391 |
| https://bugs.webkit.org/show_bug.cgi?id=184062 |
| |
| Reviewed by Alex Christensen. |
| |
| * jit/CCallHelpers.h: |
| (JSC::CCallHelpers::marshallArgumentRegister): |
| Exempt MSVC from a single forced inline used within recursive templates. |
| |
| 2018-03-28 Mark Lam <mark.lam@apple.com> |
| |
| Enhance ARM64 probe to support pointer profiling. |
| https://bugs.webkit.org/show_bug.cgi?id=184069 |
| <rdar://problem/38939879> |
| |
| Reviewed by JF Bastien. |
| |
| * assembler/MacroAssemblerARM64.cpp: |
| (JSC::MacroAssembler::probe): |
| * assembler/MacroAssemblerX86Common.h: |
| (JSC::MacroAssemblerX86Common::popPair): |
| (JSC::MacroAssemblerX86Common::pushPair): |
| * assembler/testmasm.cpp: |
| (JSC::testProbeReadsArgumentRegisters): |
| (JSC::testProbeWritesArgumentRegisters): |
| * runtime/PtrTag.h: |
| (JSC::tagForPtr): |
| |
| 2018-03-28 Robin Morisset <rmorisset@apple.com> |
| |
| appendQuotedJSONString stops on arithmetic overflow instead of propagating it upwards |
| https://bugs.webkit.org/show_bug.cgi?id=183894 |
| |
| Reviewed by Saam Barati. |
| |
| Use the return value of appendQuotedJSONString to fail more gracefully when given a string that is too large to handle. |
| |
| * runtime/JSONObject.cpp: |
| (JSC::Stringifier::appendStringifiedValue): |
| |
| 2018-03-28 Carlos Garcia Campos <cgarcia@igalia.com> |
| |
| [JSC] Move WeakValueRef class to its own file and use it from Objc and GLib |
| https://bugs.webkit.org/show_bug.cgi?id=184073 |
| |
| Reviewed by Yusuke Suzuki. |
| |
| We currently have duplicated code in Obj and GLib implementations. |
| |
| * API/JSManagedValue.mm: |
| (managedValueHandleOwner): |
| (-[JSManagedValue initWithValue:]): |
| * API/JSWeakValue.cpp: Added. |
| (JSC::JSWeakValue::~JSWeakValue): |
| (JSC::JSWeakValue::clear): |
| (JSC::JSWeakValue::isClear const): |
| (JSC::JSWeakValue::setPrimitive): |
| (JSC::JSWeakValue::setObject): |
| (JSC::JSWeakValue::setString): |
| * API/JSWeakValue.h: Added. |
| (JSC::JSWeakValue::isSet const): |
| (JSC::JSWeakValue::isPrimitive const): |
| (JSC::JSWeakValue::isObject const): |
| (JSC::JSWeakValue::isString const): |
| (JSC::JSWeakValue::object const): |
| (JSC::JSWeakValue::primitive const): |
| (JSC::JSWeakValue::string const): |
| * API/glib/JSCWeakValue.cpp: |
| * JavaScriptCore.xcodeproj/project.pbxproj: |
| * Sources.txt: |
| |
| 2018-03-27 Carlos Garcia Campos <cgarcia@igalia.com> |
| |
| [GLIB] Add JSCWeakValue to JavaScriptCore GLib API |
| https://bugs.webkit.org/show_bug.cgi?id=184041 |
| |
| Reviewed by Michael Catanzaro. |
| |
| This allows to keep a reference to a JavaSCript value without protecting it, and without having a strong |
| reference of the context. When the value is cleared the JSCWeakValue::cleared signal is emitted and |
| jsc_weak_value_get_value() will always return nullptr. |
| |
| * API/glib/JSCWeakValue.cpp: Added. |
| (WeakValueRef::~WeakValueRef): |
| (WeakValueRef::clear): |
| (WeakValueRef::isClear const): |
| (WeakValueRef::isSet const): |
| (WeakValueRef::isPrimitive const): |
| (WeakValueRef::isObject const): |
| (WeakValueRef::isString const): |
| (WeakValueRef::setPrimitive): |
| (WeakValueRef::setObject): |
| (WeakValueRef::setString): |
| (WeakValueRef::object const): |
| (WeakValueRef::primitive const): |
| (WeakValueRef::string const): |
| (weakValueHandleOwner): |
| (jscWeakValueInitialize): |
| (jscWeakValueSetProperty): |
| (jscWeakValueDispose): |
| (jsc_weak_value_class_init): |
| (jsc_weak_value_new): |
| (jsc_weak_value_get_value): |
| * API/glib/JSCWeakValue.h: Added. |
| * API/glib/docs/jsc-glib-4.0-sections.txt: |
| * API/glib/docs/jsc-glib-docs.sgml: |
| * API/glib/jsc.h: |
| * GLib.cmake: |
| |
| 2018-03-27 Yusuke Suzuki <utatane.tea@gmail.com> |
| |
| [DFG] Remove unnecessary USE(JSVALUE32_64) / USE(JSVALUE64) |
| https://bugs.webkit.org/show_bug.cgi?id=181292 |
| |
| Reviewed by Saam Barati. |
| |
| By using JSValueRegs abstraction, we can simplify DFGSpeculativeJIT.cpp code. |
| |
| * dfg/DFGSpeculativeJIT.cpp: |
| (JSC::DFG::SpeculativeJIT::compileGetByValOnDirectArguments): |
| (JSC::DFG::SpeculativeJIT::compileGetByValOnScopedArguments): |
| (JSC::DFG::SpeculativeJIT::compileCreateRest): |
| (JSC::DFG::SpeculativeJIT::compileArraySlice): |
| (JSC::DFG::SpeculativeJIT::emitSwitchImm): |
| (JSC::DFG::SpeculativeJIT::compilePutDynamicVar): |
| (JSC::DFG::SpeculativeJIT::compilePutAccessorByVal): |
| |
| 2018-03-27 Yusuke Suzuki <utatane.tea@gmail.com> |
| |
| Add Load16Z for B3 and use it in WebAssembly |
| https://bugs.webkit.org/show_bug.cgi?id=165884 |
| |
| Reviewed by JF Bastien. |
| |
| We already support Load16Z in B3. Use it for i32.load16_u / i64.load16_u in WebAssembly. |
| spec-tests/memory.wast.js already covered this change. |
| |
| * wasm/WasmB3IRGenerator.cpp: |
| (JSC::Wasm::B3IRGenerator::emitLoadOp): |
| |
| 2018-03-24 Yusuke Suzuki <utatane.tea@gmail.com> |
| |
| [JSC] Remove repeated iteration of ElementNode |
| https://bugs.webkit.org/show_bug.cgi?id=183987 |
| |
| Reviewed by Keith Miller. |
| |
| BytecodeGenerator repeatedly iterates ElementNode to emit the efficient code. |
| While it is OK for small arrays, this repeated iteration takes much time |
| if the array is very large. For example, Kraken's initialization code includes |
| very large array with numeric literals. This makes bytecode compiling so long. |
| |
| This patch carefully removes unnecessary iteration when emitting arrays. |
| This reduces one of Kraken/imaging-darkroom's bytecode compiling from 13.169856 ms |
| to 9.988050 ms. |
| |
| * bytecompiler/BytecodeGenerator.cpp: |
| (JSC::BytecodeGenerator::emitNewArrayBuffer): |
| (JSC::BytecodeGenerator::emitNewArray): |
| * bytecompiler/BytecodeGenerator.h: |
| * bytecompiler/NodesCodegen.cpp: |
| (JSC::ArrayNode::emitBytecode): |
| (JSC::ArrayPatternNode::bindValue const): |
| (JSC::ArrayPatternNode::emitDirectBinding): |
| |
| 2018-03-26 Ross Kirsling <ross.kirsling@sony.com> |
| |
| JIT callOperation() needs to support operations that return SlowPathReturnType differently on Windows. |
| https://bugs.webkit.org/show_bug.cgi?id=183655 |
| |
| Reviewed by Keith Miller. |
| |
| * jit/CCallHelpers.h: |
| (JSC::CCallHelpers::ArgCollection::argCount): |
| (JSC::CCallHelpers::marshallArgumentRegister): |
| (JSC::CCallHelpers::setupArgumentsImpl): |
| On Win64, ensure that argCount always includes GPRs and FPRs and that counting starts from 1 for SlowPathReturnType. |
| |
| * jit/JIT.h: |
| (JSC::JIT::callOperation): |
| (JSC::JIT::is64BitType): |
| (JSC::JIT::is64BitType<void>): |
| On Win64, ensure special call is used for SlowPathReturnType. |
| |
| * jit/JITOperations.h: |
| Update changed type. |
| |
| 2018-03-26 Yusuke Suzuki <utatane.tea@gmail.com> |
| |
| We should have SSE4 detection in the X86 MacroAssembler. |
| https://bugs.webkit.org/show_bug.cgi?id=165363 |
| |
| Reviewed by JF Bastien. |
| |
| This patch adds popcnt support to WASM in x86_64 environment. |
| To use it, we refactor our CPUID feature detection in MacroAssemblerX86Common. |
| Our spec-tests already cover popcnt. |
| |
| * assembler/MacroAssemblerARM64.h: |
| (JSC::MacroAssemblerARM64::supportsCountPopulation): |
| * assembler/MacroAssemblerX86Common.cpp: |
| (JSC::MacroAssemblerX86Common::getCPUID): |
| (JSC::MacroAssemblerX86Common::getCPUIDEx): |
| (JSC::MacroAssemblerX86Common::collectCPUFeatures): |
| * assembler/MacroAssemblerX86Common.h: |
| (JSC::MacroAssemblerX86Common::countPopulation32): |
| (JSC::MacroAssemblerX86Common::supportsFloatingPointRounding): |
| (JSC::MacroAssemblerX86Common::supportsCountPopulation): |
| (JSC::MacroAssemblerX86Common::supportsAVX): |
| (JSC::MacroAssemblerX86Common::supportsLZCNT): |
| (JSC::MacroAssemblerX86Common::supportsBMI1): |
| (JSC::MacroAssemblerX86Common::isSSE2Present): |
| (JSC::MacroAssemblerX86Common::updateEax1EcxFlags): Deleted. |
| * assembler/MacroAssemblerX86_64.h: |
| (JSC::MacroAssemblerX86_64::countPopulation64): |
| * assembler/X86Assembler.h: |
| (JSC::X86Assembler::popcnt_rr): |
| (JSC::X86Assembler::popcnt_mr): |
| (JSC::X86Assembler::popcntq_rr): |
| (JSC::X86Assembler::popcntq_mr): |
| * wasm/WasmB3IRGenerator.cpp: |
| (JSC::Wasm::B3IRGenerator::addOp<OpType::I32Popcnt>): |
| (JSC::Wasm::B3IRGenerator::addOp<OpType::I64Popcnt>): |
| |
| 2018-03-26 Filip Pizlo <fpizlo@apple.com> |
| |
| DFG should know that CreateThis can be effectful |
| https://bugs.webkit.org/show_bug.cgi?id=184013 |
| |
| Reviewed by Saam Barati. |
| |
| As shown in the tests added in JSTests, CreateThis can be effectful if the constructor this |
| is a proxy. |
| |
| * dfg/DFGAbstractInterpreterInlines.h: |
| (JSC::DFG::AbstractInterpreter<AbstractStateType>::executeEffects): |
| * dfg/DFGClobberize.h: |
| (JSC::DFG::clobberize): |
| |
| 2018-03-25 Saam Barati <sbarati@apple.com> |
| |
| Fix typo in JSC option name |
| https://bugs.webkit.org/show_bug.cgi?id=184001 |
| |
| Reviewed by Mark Lam. |
| |
| enableJITDebugAssetions => enableJITDebugAssertions. |
| |
| * assembler/MacroAssembler.cpp: |
| (JSC::MacroAssembler::jitAssert): |
| * runtime/Options.h: |
| |
| 2018-03-25 Saam Barati <sbarati@apple.com> |
| |
| r228149 accidentally removed code that resets m_emptyCursor at the end of a GC |
| https://bugs.webkit.org/show_bug.cgi?id=183995 |
| |
| Reviewed by Filip Pizlo. |
| |
| The removal of this line of code was unintended and happened during some |
| refactoring Fil was doing. The consequence of removing this line of code |
| is that the m_emptyCursor became a monotonically increasing integer, leading |
| the cursor to usually being out of bounds of the block range (depending on |
| what the program is doing). This made the functionality of finding an empty |
| block to steal almost always fail. |
| |
| * heap/BlockDirectory.cpp: |
| (JSC::BlockDirectory::prepareForAllocation): |
| |
| 2018-03-22 Yusuke Suzuki <utatane.tea@gmail.com> |
| |
| [DFG] Introduces fused compare and jump |
| https://bugs.webkit.org/show_bug.cgi?id=177100 |
| |
| Reviewed by Mark Lam. |
| |
| This patch introduces op_jeq, op_jneq, op_jstricteq, and op_jnstricteq. |
| It offers 3 benefit. |
| |
| 1. They are introduced due to the similar purpose to op_jless etc. It aligns |
| op_eq families to op_jless families. |
| |
| 2. It reduces the size of bytecode to represent the typical code sequence. |
| |
| 3. It offers the way to fuse check and jump in DFG code generation. Since |
| we have MovHint between Branch and CompareEq/CompareStrictEq previously, |
| we cannot do this optimization. It reduces the machine code size in DFG too. |
| |
| It slightly improves Octane/boyer. |
| |
| boyer 6.18038+-0.05002 ^ 6.06990+-0.04176 ^ definitely 1.0182x faster |
| |
| * bytecode/BytecodeDumper.cpp: |
| (JSC::BytecodeDumper<Block>::dumpBytecode): |
| * bytecode/BytecodeList.json: |
| * bytecode/BytecodeUseDef.h: |
| (JSC::computeUsesForBytecodeOffset): |
| (JSC::computeDefsForBytecodeOffset): |
| * bytecode/Opcode.h: |
| (JSC::isBranch): |
| * bytecode/PreciseJumpTargetsInlines.h: |
| (JSC::extractStoredJumpTargetsForBytecodeOffset): |
| * bytecompiler/BytecodeGenerator.cpp: |
| (JSC::BytecodeGenerator::emitJumpIfTrue): |
| (JSC::BytecodeGenerator::emitJumpIfFalse): |
| * dfg/DFGByteCodeParser.cpp: |
| (JSC::DFG::ByteCodeParser::parseBlock): |
| * dfg/DFGCapabilities.cpp: |
| (JSC::DFG::capabilityLevel): |
| * dfg/DFGOperations.cpp: |
| * dfg/DFGOperations.h: |
| * dfg/DFGSpeculativeJIT.cpp: |
| (JSC::DFG::SpeculativeJIT::compileStrictEq): |
| * jit/JIT.cpp: |
| (JSC::JIT::privateCompileMainPass): |
| (JSC::JIT::privateCompileSlowCases): |
| * jit/JIT.h: |
| * jit/JITOpcodes.cpp: |
| (JSC::JIT::emit_op_jeq): |
| (JSC::JIT::emit_op_neq): |
| (JSC::JIT::emit_op_jneq): |
| (JSC::JIT::compileOpStrictEq): |
| (JSC::JIT::emit_op_stricteq): |
| (JSC::JIT::emit_op_nstricteq): |
| (JSC::JIT::compileOpStrictEqJump): |
| (JSC::JIT::emit_op_jstricteq): |
| (JSC::JIT::emit_op_jnstricteq): |
| (JSC::JIT::emitSlow_op_jstricteq): |
| (JSC::JIT::emitSlow_op_jnstricteq): |
| (JSC::JIT::emitSlow_op_jeq): |
| (JSC::JIT::emitSlow_op_jneq): |
| * jit/JITOpcodes32_64.cpp: |
| (JSC::JIT::emitSlow_op_eq): |
| (JSC::JIT::emit_op_jeq): |
| (JSC::JIT::compileOpEqJumpSlow): |
| (JSC::JIT::emitSlow_op_jeq): |
| (JSC::JIT::emit_op_jneq): |
| (JSC::JIT::emitSlow_op_jneq): |
| (JSC::JIT::compileOpStrictEq): |
| (JSC::JIT::emit_op_stricteq): |
| (JSC::JIT::emit_op_nstricteq): |
| (JSC::JIT::compileOpStrictEqJump): |
| (JSC::JIT::emit_op_jstricteq): |
| (JSC::JIT::emit_op_jnstricteq): |
| (JSC::JIT::emitSlow_op_jstricteq): |
| (JSC::JIT::emitSlow_op_jnstricteq): |
| * jit/JITOperations.cpp: |
| * jit/JITOperations.h: |
| * llint/LLIntSlowPaths.cpp: |
| (JSC::LLInt::LLINT_SLOW_PATH_DECL): |
| * llint/LLIntSlowPaths.h: |
| * llint/LowLevelInterpreter.asm: |
| * llint/LowLevelInterpreter32_64.asm: |
| * llint/LowLevelInterpreter64.asm: |
| |
| 2018-03-24 Yusuke Suzuki <utatane.tea@gmail.com> |
| |
| [JSC] Improve constants and add comments for CodeBlockHash |
| https://bugs.webkit.org/show_bug.cgi?id=183982 |
| |
| Rubber-stamped by Mark Lam. |
| |
| * bytecode/CodeBlockHash.cpp: |
| (JSC::CodeBlockHash::CodeBlockHash): |
| * bytecode/ParseHash.cpp: |
| (JSC::ParseHash::ParseHash): |
| |
| 2018-03-24 Yusuke Suzuki <utatane.tea@gmail.com> |
| |
| [JSC] Add options to report parsing and bytecode compiling times |
| https://bugs.webkit.org/show_bug.cgi?id=183982 |
| |
| Reviewed by Mark Lam. |
| |
| This patch adds reportParseTimes and reportBytecodeCompileTimes options. |
| When they are enabled, JSC reports times consumed for parsing and bytecode |
| compiling. |
| |
| * JavaScriptCore.xcodeproj/project.pbxproj: |
| * Sources.txt: |
| * bytecode/ParseHash.cpp: Added. |
| (JSC::ParseHash::ParseHash): |
| * bytecode/ParseHash.h: Added. |
| (JSC::ParseHash::hashForCall const): |
| (JSC::ParseHash::hashForConstruct const): |
| * bytecode/UnlinkedFunctionExecutable.cpp: |
| (JSC::generateUnlinkedFunctionCodeBlock): |
| * bytecompiler/BytecodeGenerator.h: |
| (JSC::BytecodeGenerator::generate): |
| * parser/Parser.h: |
| (JSC::parse): |
| * runtime/CodeCache.h: |
| (JSC::generateUnlinkedCodeBlock): |
| * runtime/Options.h: |
| |
| 2018-03-24 Yusuke Suzuki <utatane.tea@gmail.com> |
| |
| [JIT] Drop ENABLE_JIT_VERBOSE flag |
| https://bugs.webkit.org/show_bug.cgi?id=183983 |
| |
| Reviewed by Mark Lam. |
| |
| Just use JITInternal::verbose value. |
| |
| * jit/JIT.cpp: |
| (JSC::JIT::privateCompileMainPass): |
| (JSC::JIT::privateCompileSlowCases): |
| (JSC::JIT::link): |
| |
| 2018-03-23 Tim Horton <timothy_horton@apple.com> |
| |
| Fix the build with no pasteboard |
| https://bugs.webkit.org/show_bug.cgi?id=183973 |
| |
| Reviewed by Dan Bernstein. |
| |
| * Configurations/FeatureDefines.xcconfig: |
| |
| 2018-03-23 Mark Lam <mark.lam@apple.com> |
| |
| LLInt TypeArray pointer poisoning should not pick its poison dynamically. |
| https://bugs.webkit.org/show_bug.cgi?id=183942 |
| <rdar://problem/38798018> |
| |
| Reviewed by JF Bastien. |
| |
| 1. Move the LLInt TypedArray unpoisoning to just before the array access after |
| all the branches. |
| 2. Renamed FirstArrayType to FirstTypedArrayType to match the symbol in C++ code. |
| 3. Remove a useless instruction in the implementation of emitX86Lea for a global |
| label. |
| |
| * llint/LowLevelInterpreter.asm: |
| * llint/LowLevelInterpreter64.asm: |
| * offlineasm/x86.rb: |
| |
| 2018-03-23 Mark Lam <mark.lam@apple.com> |
| |
| Add more support for pointer profiling. |
| https://bugs.webkit.org/show_bug.cgi?id=183943 |
| <rdar://problem/38799068> |
| |
| Reviewed by JF Bastien. |
| |
| * assembler/ARM64Assembler.h: |
| (JSC::ARM64Assembler::linkJumpOrCall): |
| * assembler/AbstractMacroAssembler.h: |
| (JSC::AbstractMacroAssembler::repatchNearCall): |
| (JSC::AbstractMacroAssembler::tagReturnAddress): |
| (JSC::AbstractMacroAssembler::untagReturnAddress): |
| |
| 2018-03-23 Yusuke Suzuki <utatane.tea@gmail.com> |
| |
| [WTF] Add standard containers with FastAllocator specialization |
| https://bugs.webkit.org/show_bug.cgi?id=183789 |
| |
| Reviewed by Darin Adler. |
| |
| * b3/air/testair.cpp: |
| * b3/testb3.cpp: |
| (JSC::B3::testDoubleLiteralComparison): |
| (JSC::B3::testFloatEqualOrUnorderedFoldingNaN): |
| * dfg/DFGGraph.h: |
| * dfg/DFGIntegerCheckCombiningPhase.cpp: |
| * dfg/DFGObjectAllocationSinkingPhase.cpp: |
| * ftl/FTLLowerDFGToB3.cpp: |
| (JSC::FTL::DFG::LowerDFGToB3::switchStringSlow): |
| * runtime/FunctionHasExecutedCache.h: |
| * runtime/TypeLocationCache.h: |
| |
| 2018-03-23 Yusuke Suzuki <utatane.tea@gmail.com> |
| |
| [FTL] Fix ArrayPush(ArrayStorage)'s abstract heap |
| https://bugs.webkit.org/show_bug.cgi?id=182960 |
| |
| Reviewed by Saam Barati. |
| |
| This patch fixes ArrayPush(ArrayStorage)'s abstract heap. |
| It should always touch ArrayStorage_vector. To unify |
| vector setting code for the real ArrayStorage_vector and |
| ScratchBuffer, we use ArrayStorage_vector.atAnyIndex() to |
| annotate this. |
| |
| * ftl/FTLLowerDFGToB3.cpp: |
| (JSC::FTL::DFG::LowerDFGToB3::compileArrayPush): |
| |
| 2018-03-23 Zan Dobersek <zdobersek@igalia.com> |
| |
| Unreviewed build fix for GCC 4.9 builds. |
| |
| * assembler/MacroAssemblerCodeRef.h: std::is_trivially_copyable<> isn't |
| supported in 4.9 libstdc++, so wrap the static assert using it in a |
| COMPILER_SUPPORTS() macro, and use __is_trivially_copyable() builtin, |
| as is done in bitwise_cast() in StdLibExtras.h. |
| |
| 2018-03-22 Tim Horton <timothy_horton@apple.com> |
| |
| Adopt WK_ALTERNATE_FRAMEWORKS_DIR in WebCore |
| https://bugs.webkit.org/show_bug.cgi?id=183930 |
| <rdar://problem/38782249> |
| |
| Reviewed by Dan Bernstein. |
| |
| * JavaScriptCore.xcodeproj/project.pbxproj: |
| |
| 2018-03-22 Mark Lam <mark.lam@apple.com> |
| |
| Add placeholder call and jump MacroAssembler emitters that take PtrTag in a register. |
| https://bugs.webkit.org/show_bug.cgi?id=183914 |
| <rdar://problem/38763536> |
| |
| Reviewed by Saam Barati and JF Bastien. |
| |
| This is in preparation for supporting pointer profiling work. |
| |
| * assembler/MacroAssemblerARM.h: |
| (JSC::MacroAssemblerARM::jump): |
| (JSC::MacroAssemblerARM::call): |
| * assembler/MacroAssemblerARM64.h: |
| (JSC::MacroAssemblerARM64::call): |
| (JSC::MacroAssemblerARM64::jump): |
| * assembler/MacroAssemblerARMv7.h: |
| (JSC::MacroAssemblerARMv7::jump): |
| (JSC::MacroAssemblerARMv7::call): |
| * assembler/MacroAssemblerMIPS.h: |
| (JSC::MacroAssemblerMIPS::jump): |
| (JSC::MacroAssemblerMIPS::call): |
| * assembler/MacroAssemblerX86.h: |
| (JSC::MacroAssemblerX86::call): |
| (JSC::MacroAssemblerX86::jump): |
| * assembler/MacroAssemblerX86Common.h: |
| (JSC::MacroAssemblerX86Common::jump): |
| (JSC::MacroAssemblerX86Common::call): |
| * assembler/MacroAssemblerX86_64.h: |
| (JSC::MacroAssemblerX86_64::call): |
| (JSC::MacroAssemblerX86_64::jump): |
| |
| 2018-03-22 Tim Horton <timothy_horton@apple.com> |
| |
| Improve readability of WebCore's OTHER_LDFLAGS |
| https://bugs.webkit.org/show_bug.cgi?id=183909 |
| <rdar://problem/38760992> |
| |
| Reviewed by Dan Bernstein. |
| |
| * Configurations/Base.xcconfig: |
| * Configurations/FeatureDefines.xcconfig: |
| |
| 2018-03-22 Dominik Infuehr <dinfuehr@igalia.com> |
| |
| [ARM] Thumb: Do not decorate bottom bit twice |
| https://bugs.webkit.org/show_bug.cgi?id=183906 |
| |
| Reviewed by Mark Lam. |
| |
| Use MacroAssemblerCodePtr::createFromExecutableAddress instead of |
| MacroAssemblerCodePtr(void*) to avoid decorating the pointer twice as |
| a thumb pointer. |
| |
| * jit/Repatch.cpp: |
| (JSC::linkPolymorphicCall): |
| |
| 2018-03-22 Yusuke Suzuki <utatane.tea@gmail.com> |
| |
| [JSC] Clear MustGenerate for ToString(Number) converted from NumberToStringWithRadix |
| https://bugs.webkit.org/show_bug.cgi?id=183559 |
| |
| Reviewed by Mark Lam. |
| |
| When converting NumberToStringWithRadix to ToString(Int52/Int32/Double), we forget |
| to clear NodeMustGenerate for this ToString. It should be since it does not have |
| any user-observable side effect. This patch clears NodeMustGenerate. |
| |
| * dfg/DFGConstantFoldingPhase.cpp: |
| (JSC::DFG::ConstantFoldingPhase::foldConstants): |
| |
| 2018-03-22 Yusuke Suzuki <utatane.tea@gmail.com> |
| |
| [JSC] List up all candidates in DFGCapabilities and FTLCapabilities |
| https://bugs.webkit.org/show_bug.cgi?id=183897 |
| |
| Reviewed by Mark Lam. |
| |
| We should not use `default:` clause here since it accidentally catches |
| the opcode and DFG nodes which should be optimized. For example, |
| op_super_sampler_begin and op_super_sampler_end are not listed while |
| they have DFG and FTL backend. |
| |
| This patch lists up all candiates in DFGCapabilities and FTLCapabilities. |
| And we also clean up unnecessary checks in FTLCapabilities. Since we |
| already handles all the possible array types for these nodes (which can |
| be checked in DFG's code), we do not need to check array types. |
| |
| We also fix FTLLowerDFGToB3' PutByVal code to use modeForPut. |
| |
| * dfg/DFGCapabilities.cpp: |
| (JSC::DFG::capabilityLevel): |
| * ftl/FTLCapabilities.cpp: |
| (JSC::FTL::canCompile): |
| * ftl/FTLLowerDFGToB3.cpp: |
| (JSC::FTL::DFG::LowerDFGToB3::compilePutByVal): |
| |
| 2018-03-22 Yusuke Suzuki <utatane.tea@gmail.com> |
| |
| [JSC] Drop op_put_by_index |
| https://bugs.webkit.org/show_bug.cgi?id=183899 |
| |
| Reviewed by Mark Lam. |
| |
| This patch drops op_put_by_index. |
| |
| 1. This functionality can be just covered by direct put_by_val. |
| 2. put_by_index is not well optimized. It is just calling a C |
| function. And it does not have DFG handling. |
| |
| * bytecode/BytecodeDumper.cpp: |
| (JSC::BytecodeDumper<Block>::dumpBytecode): |
| * bytecode/BytecodeList.json: |
| * bytecode/BytecodeUseDef.h: |
| (JSC::computeUsesForBytecodeOffset): |
| (JSC::computeDefsForBytecodeOffset): |
| * bytecompiler/BytecodeGenerator.cpp: |
| (JSC::BytecodeGenerator::emitPutByIndex): Deleted. |
| * bytecompiler/BytecodeGenerator.h: |
| * bytecompiler/NodesCodegen.cpp: |
| (JSC::ArrayNode::emitBytecode): |
| (JSC::ArrayPatternNode::emitDirectBinding): |
| * jit/JIT.cpp: |
| (JSC::JIT::privateCompileMainPass): |
| * jit/JIT.h: |
| * jit/JITPropertyAccess.cpp: |
| (JSC::JIT::emit_op_put_by_index): Deleted. |
| * jit/JITPropertyAccess32_64.cpp: |
| (JSC::JIT::emit_op_put_by_index): Deleted. |
| * llint/LLIntSlowPaths.cpp: |
| * llint/LLIntSlowPaths.h: |
| * llint/LowLevelInterpreter.asm: |
| |
| 2018-03-22 Michael Saboff <msaboff@apple.com> |
| |
| Race Condition in arrayProtoFuncReverse() causes wrong results or crash |
| https://bugs.webkit.org/show_bug.cgi?id=183901 |
| |
| Reviewed by Keith Miller. |
| |
| Added write barriers to ensure the reversed contents are properly marked. |
| |
| * runtime/ArrayPrototype.cpp: |
| (JSC::arrayProtoFuncReverse): |
| |
| 2018-03-21 Filip Pizlo <fpizlo@apple.com> |
| |
| ScopedArguments should do poisoning and index masking |
| https://bugs.webkit.org/show_bug.cgi?id=183863 |
| |
| Reviewed by Mark Lam. |
| |
| This outlines the ScopedArguments overflow storage and adds poisoning. |
| |
| * bytecode/AccessCase.cpp: |
| (JSC::AccessCase::generateWithGuard): |
| * dfg/DFGSpeculativeJIT.cpp: |
| (JSC::DFG::SpeculativeJIT::compileGetByValOnScopedArguments): |
| (JSC::DFG::SpeculativeJIT::compileGetArrayLength): |
| * ftl/FTLAbstractHeapRepository.h: |
| * ftl/FTLLowerDFGToB3.cpp: |
| (JSC::FTL::DFG::LowerDFGToB3::compileGetArrayLength): |
| (JSC::FTL::DFG::LowerDFGToB3::compileGetByVal): |
| * jit/JITPropertyAccess.cpp: |
| (JSC::JIT::emitScopedArgumentsGetByVal): |
| * runtime/JSCPoison.h: |
| * runtime/ScopedArguments.cpp: |
| (JSC::ScopedArguments::ScopedArguments): |
| (JSC::ScopedArguments::createUninitialized): |
| (JSC::ScopedArguments::visitChildren): |
| * runtime/ScopedArguments.h: |
| |
| 2018-03-21 Mark Lam <mark.lam@apple.com> |
| |
| Refactor the PtrTag list as a macro so that we can auto-generate code that enumerates each PtrTag. |
| https://bugs.webkit.org/show_bug.cgi?id=183861 |
| <rdar://problem/38716822> |
| |
| Reviewed by Filip Pizlo. |
| |
| Also added ptrTagName() to aid debugging. ptrTagName() is implemented using this |
| new PtrTag macro list. |
| |
| * CMakeLists.txt: |
| * JavaScriptCore.xcodeproj/project.pbxproj: |
| * Sources.txt: |
| * runtime/PtrTag.cpp: Added. |
| (JSC::ptrTagName): |
| * runtime/PtrTag.h: |
| |
| 2018-03-21 Mark Lam <mark.lam@apple.com> |
| |
| Use CodeBlock::instructions()[] and CodeBlock::bytecodeOffset() instead of doing own pointer math. |
| https://bugs.webkit.org/show_bug.cgi?id=183857 |
| <rdar://problem/38712184> |
| |
| Reviewed by JF Bastien. |
| |
| We should avoid doing pointer math with CodeBlock::instructions().begin(). |
| Instead, we should use the operator[] that comes with CodeBlock::instructions() |
| for computing an Instruction*, and use CodeBlock::bytecodeOffset() for computing |
| the bytecode offset of a given Instruction*. These methods will do assertions |
| which helps catch bugs sooner, plus they are more descriptive of the operation |
| we're trying to do. |
| |
| * bytecode/BytecodeKills.h: |
| (JSC::BytecodeKills::operandIsKilled const): |
| (JSC::BytecodeKills::forEachOperandKilledAt const): |
| * bytecode/CallLinkStatus.cpp: |
| (JSC::CallLinkStatus::computeFromLLInt): |
| * bytecode/CodeBlock.cpp: |
| (JSC::CodeBlock::dumpBytecode): |
| (JSC::CodeBlock::arithProfileForBytecodeOffset): |
| (JSC::CodeBlock::bytecodeOffsetFromCallSiteIndex): |
| * bytecode/GetByIdStatus.cpp: |
| (JSC::GetByIdStatus::computeFromLLInt): |
| * bytecode/PutByIdStatus.cpp: |
| (JSC::PutByIdStatus::computeFromLLInt): |
| * dfg/DFGByteCodeParser.cpp: |
| (JSC::DFG::ByteCodeParser::getPredictionWithoutOSRExit): |
| * dfg/DFGOSRExit.cpp: |
| (JSC::DFG::reifyInlinedCallFrames): |
| * dfg/DFGOSRExitCompilerCommon.cpp: |
| (JSC::DFG::reifyInlinedCallFrames): |
| * interpreter/CallFrame.cpp: |
| (JSC::CallFrame::callSiteBitsAsBytecodeOffset const): |
| (JSC::CallFrame::currentVPC const): |
| (JSC::CallFrame::setCurrentVPC): |
| * jit/JITCall.cpp: |
| (JSC::JIT::compileOpCall): |
| * jit/JITInlines.h: |
| (JSC::JIT::updateTopCallFrame): |
| (JSC::JIT::copiedInstruction): |
| * jit/JITOpcodes.cpp: |
| (JSC::JIT::privateCompileHasIndexedProperty): |
| * jit/JITOpcodes32_64.cpp: |
| (JSC::JIT::privateCompileHasIndexedProperty): |
| * jit/JITPropertyAccess.cpp: |
| (JSC::JIT::privateCompileGetByVal): |
| (JSC::JIT::privateCompileGetByValWithCachedId): |
| (JSC::JIT::privateCompilePutByVal): |
| (JSC::JIT::privateCompilePutByValWithCachedId): |
| * jit/SlowPathCall.h: |
| (JSC::JITSlowPathCall::call): |
| * llint/LLIntSlowPaths.cpp: |
| (JSC::LLInt::llint_trace_operand): |
| (JSC::LLInt::llint_trace_value): |
| (JSC::LLInt::LLINT_SLOW_PATH_DECL): |
| (JSC::LLInt::setupGetByIdPrototypeCache): Deleted. |
| (JSC::LLInt::getByVal): Deleted. |
| (JSC::LLInt::handleHostCall): Deleted. |
| (JSC::LLInt::setUpCall): Deleted. |
| (JSC::LLInt::genericCall): Deleted. |
| (JSC::LLInt::varargsSetup): Deleted. |
| (JSC::LLInt::llint_throw_stack_overflow_error): Deleted. |
| (JSC::LLInt::llint_stack_check_at_vm_entry): Deleted. |
| (JSC::LLInt::llint_write_barrier_slow): Deleted. |
| (JSC::LLInt::llint_crash): Deleted. |
| * runtime/SamplingProfiler.cpp: |
| (JSC::tryGetBytecodeIndex): |
| |
| 2018-03-21 Keith Miller <keith_miller@apple.com> |
| |
| btjs should print the bytecode offset in the stack trace for JS frames |
| https://bugs.webkit.org/show_bug.cgi?id=183856 |
| |
| Reviewed by Filip Pizlo. |
| |
| * interpreter/CallFrame.cpp: |
| (JSC::CallFrame::bytecodeOffset): |
| (JSC::CallFrame::dump): |
| |
| 2018-03-21 Carlos Garcia Campos <cgarcia@igalia.com> |
| |
| Unreviewed. Fix GTK and WPE debug build after r229798. |
| |
| Fix a typo in an ASSERT. Also convert several RELEASE_ASSERT to ASSERT that I forgot to do before landing. |
| |
| * API/glib/JSCCallbackFunction.cpp: |
| (JSC::JSCCallbackFunction::JSCCallbackFunction): |
| * API/glib/JSCContext.cpp: |
| (jscContextSetVirtualMachine): |
| (jscContextGetJSContext): |
| (wrapperMap): |
| (jscContextHandleExceptionIfNeeded): |
| * API/glib/JSCValue.cpp: |
| (jscValueCallFunction): |
| * API/glib/JSCVirtualMachine.cpp: |
| (addWrapper): |
| (removeWrapper): |
| (jscVirtualMachineSetContextGroup): |
| (jscVirtualMachineAddContext): |
| (jscVirtualMachineRemoveContext): |
| * API/glib/JSCWrapperMap.cpp: |
| (JSC::WrapperMap::gobjectWrapper): |
| (JSC::WrapperMap::unwrap): |
| (JSC::WrapperMap::registerClass): |
| (JSC::WrapperMap::createJSWrappper): |
| (JSC::WrapperMap::wrappedObject const): |
| |
| 2018-03-21 Carlos Garcia Campos <cgarcia@igalia.com> |
| |
| [GTK][WPE] JSC bindings not introspectable |
| https://bugs.webkit.org/show_bug.cgi?id=136989 |
| |
| Reviewed by Michael Catanzaro. |
| |
| Make it possible to include individual headers when building WebKit layer. |
| |
| * API/glib/JSCAutocleanups.h: |
| * API/glib/JSCClass.h: |
| * API/glib/JSCContext.h: |
| * API/glib/JSCException.h: |
| * API/glib/JSCValue.h: |
| * API/glib/JSCVersion.h.in: |
| * API/glib/JSCVirtualMachine.h: |
| |
| 2018-03-21 Carlos Garcia Campos <cgarcia@igalia.com> |
| |
| [GTK][WPE] Initial implementation of JavaScriptCore glib bindings |
| https://bugs.webkit.org/show_bug.cgi?id=164061 |
| |
| Reviewed by Michael Catanzaro. |
| |
| Add initial GLib API for JavaScriptCore. |
| |
| * API/JSAPIWrapperObject.h: |
| * API/glib/JSAPIWrapperObjectGLib.cpp: Added. |
| (jsAPIWrapperObjectHandleOwner): |
| (JSAPIWrapperObjectHandleOwner::finalize): |
| (JSAPIWrapperObjectHandleOwner::isReachableFromOpaqueRoots): |
| (JSC::JSCallbackObject<JSAPIWrapperObject>::createStructure): |
| (JSC::JSAPIWrapperObject::JSAPIWrapperObject): |
| (JSC::JSAPIWrapperObject::finishCreation): |
| (JSC::JSAPIWrapperObject::setWrappedObject): |
| (JSC::JSAPIWrapperObject::visitChildren): |
| * API/glib/JSCAutocleanups.h: Added. |
| * API/glib/JSCCallbackFunction.cpp: Added. |
| (JSC::callAsFunction): |
| (JSC::callAsConstructor): |
| (JSC::JSCCallbackFunction::create): |
| (JSC::JSCCallbackFunction::JSCCallbackFunction): |
| (JSC::JSCCallbackFunction::call): |
| (JSC::JSCCallbackFunction::construct): |
| (JSC::JSCCallbackFunction::destroy): |
| * API/glib/JSCCallbackFunction.h: Added. |
| (JSC::JSCCallbackFunction::createStructure): |
| (JSC::JSCCallbackFunction::functionCallback): |
| (JSC::JSCCallbackFunction::constructCallback): |
| * API/glib/JSCClass.cpp: Added. |
| (jscClassGetProperty): |
| (jscClassSetProperty): |
| (jscClassDispose): |
| (jscClassConstructed): |
| (jsc_class_class_init): |
| (jscClassCreate): |
| (jscClassGetJSClass): |
| (jscClassGetOrCreateJSWrapper): |
| (jscClassInvalidate): |
| (jsc_class_get_name): |
| (jsc_class_get_parent): |
| (jsc_class_add_constructor): |
| (jsc_class_add_method): |
| (jsc_class_add_property): |
| * API/glib/JSCClass.h: Added. |
| * API/glib/JSCClassPrivate.h: Added. |
| * API/glib/JSCContext.cpp: Added. |
| (ExceptionHandler::ExceptionHandler): |
| (ExceptionHandler::~ExceptionHandler): |
| (jscContextSetVirtualMachine): |
| (jscContextGetProperty): |
| (jscContextSetProperty): |
| (jscContextConstructed): |
| (jscContextDispose): |
| (jsc_context_class_init): |
| (jscContextGetOrCreate): |
| (jscContextGetJSContext): |
| (wrapperMap): |
| (jscContextGetOrCreateValue): |
| (jscContextValueDestroyed): |
| (jscContextGetJSWrapper): |
| (jscContextGetOrCreateJSWrapper): |
| (jscContextWrappedObject): |
| (jscContextPushCallback): |
| (jscContextPopCallback): |
| (jscContextGArrayToJSArray): |
| (jscContextJSArrayToGArray): |
| (jscContextGValueToJSValue): |
| (jscContextJSValueToGValue): |
| (jsc_context_new): |
| (jsc_context_new_with_virtual_machine): |
| (jsc_context_get_virtual_machine): |
| (jsc_context_get_exception): |
| (jsc_context_throw): |
| (jsc_context_throw_exception): |
| (jsc_context_push_exception_handler): |
| (jsc_context_pop_exception_handler): |
| (jscContextHandleExceptionIfNeeded): |
| (jsc_context_get_current): |
| (jsc_context_evaluate): |
| (jsc_context_evaluate_with_source_uri): |
| (jsc_context_set_value): |
| (jsc_context_get_value): |
| (jsc_context_register_class): |
| * API/glib/JSCContext.h: Added. |
| * API/glib/JSCContextPrivate.h: Added. |
| * API/glib/JSCDefines.h: Copied from Source/JavaScriptCore/API/JSAPIWrapperObject.h. |
| * API/glib/JSCException.cpp: Added. |
| (jscExceptionDispose): |
| (jsc_exception_class_init): |
| (jscExceptionCreate): |
| (jscExceptionGetJSValue): |
| (jscExceptionEnsureProperties): |
| (jsc_exception_new): |
| (jsc_exception_get_message): |
| (jsc_exception_get_line_number): |
| (jsc_exception_get_source_uri): |
| * API/glib/JSCException.h: Added. |
| * API/glib/JSCExceptionPrivate.h: Added. |
| * API/glib/JSCGLibWrapperObject.h: Added. |
| (JSC::JSCGLibWrapperObject::JSCGLibWrapperObject): |
| (JSC::JSCGLibWrapperObject::~JSCGLibWrapperObject): |
| (JSC::JSCGLibWrapperObject::object const): |
| * API/glib/JSCValue.cpp: Added. |
| (jscValueGetProperty): |
| (jscValueSetProperty): |
| (jscValueDispose): |
| (jsc_value_class_init): |
| (jscValueGetJSValue): |
| (jscValueCreate): |
| (jsc_value_get_context): |
| (jsc_value_new_undefined): |
| (jsc_value_is_undefined): |
| (jsc_value_new_null): |
| (jsc_value_is_null): |
| (jsc_value_new_number): |
| (jsc_value_is_number): |
| (jsc_value_to_double): |
| (jsc_value_to_int32): |
| (jsc_value_new_boolean): |
| (jsc_value_is_boolean): |
| (jsc_value_to_boolean): |
| (jsc_value_new_string): |
| (jsc_value_is_string): |
| (jsc_value_to_string): |
| (jsc_value_new_array): |
| (jsc_value_new_array_from_garray): |
| (jsc_value_is_array): |
| (jsc_value_new_object): |
| (jsc_value_is_object): |
| (jsc_value_object_is_instance_of): |
| (jsc_value_object_set_property): |
| (jsc_value_object_get_property): |
| (jsc_value_object_set_property_at_index): |
| (jsc_value_object_get_property_at_index): |
| (jscValueCallFunction): |
| (jsc_value_object_invoke_method): |
| (jsc_value_object_define_property_data): |
| (jsc_value_object_define_property_accessor): |
| (jsc_value_new_function): |
| (jsc_value_is_function): |
| (jsc_value_function_call): |
| (jsc_value_is_constructor): |
| (jsc_value_constructor_call): |
| * API/glib/JSCValue.h: Added. |
| * API/glib/JSCValuePrivate.h: Added. |
| * API/glib/JSCVersion.cpp: Added. |
| (jsc_get_major_version): |
| (jsc_get_minor_version): |
| (jsc_get_micro_version): |
| * API/glib/JSCVersion.h.in: Added. |
| * API/glib/JSCVirtualMachine.cpp: Added. |
| (addWrapper): |
| (removeWrapper): |
| (jscVirtualMachineSetContextGroup): |
| (jscVirtualMachineEnsureContextGroup): |
| (jscVirtualMachineDispose): |
| (jsc_virtual_machine_class_init): |
| (jscVirtualMachineGetOrCreate): |
| (jscVirtualMachineGetContextGroup): |
| (jscVirtualMachineAddContext): |
| (jscVirtualMachineRemoveContext): |
| (jscVirtualMachineGetContext): |
| (jsc_virtual_machine_new): |
| * API/glib/JSCVirtualMachine.h: Added. |
| * API/glib/JSCVirtualMachinePrivate.h: Added. |
| * API/glib/JSCWrapperMap.cpp: Added. |
| (JSC::WrapperMap::WrapperMap): |
| (JSC::WrapperMap::~WrapperMap): |
| (JSC::WrapperMap::gobjectWrapper): |
| (JSC::WrapperMap::unwrap): |
| (JSC::WrapperMap::registerClass): |
| (JSC::WrapperMap::createJSWrappper): |
| (JSC::WrapperMap::jsWrapper const): |
| (JSC::WrapperMap::wrappedObject const): |
| * API/glib/JSCWrapperMap.h: Added. |
| * API/glib/docs/jsc-glib-4.0-sections.txt: Added. |
| * API/glib/docs/jsc-glib-4.0.types: Added. |
| * API/glib/docs/jsc-glib-docs.sgml: Added. |
| * API/glib/jsc.h: Added. |
| * CMakeLists.txt: |
| * GLib.cmake: Added. |
| * JavaScriptCore.gir.in: Removed. |
| * PlatformGTK.cmake: |
| * PlatformWPE.cmake: |
| * heap/Heap.cpp: |
| (JSC::Heap::releaseDelayedReleasedObjects): |
| * heap/Heap.h: |
| * heap/HeapInlines.h: |
| (JSC::Heap::releaseSoon): |
| * javascriptcoregtk.pc.in: |
| * runtime/JSGlobalObject.cpp: |
| (JSC::JSGlobalObject::init): |
| (JSC::JSGlobalObject::visitChildren): |
| (JSC::JSGlobalObject::setWrapperMap): |
| * runtime/JSGlobalObject.h: |
| (JSC::JSGlobalObject::glibCallbackFunctionStructure const): |
| (JSC::JSGlobalObject::glibWrapperObjectStructure const): |
| (JSC::JSGlobalObject::wrapperMap const): |
| |
| 2018-03-21 Christopher Reid <chris.reid@sony.com> |
| |
| Windows 64-bit build fix after r229767 |
| https://bugs.webkit.org/show_bug.cgi?id=183810 |
| |
| Reviewed by Mark Lam. |
| |
| Removing an extra parameter in the call to m_assember::call. |
| |
| * assembler/MacroAssemblerX86_64.h: |
| |
| 2018-03-20 Dan Bernstein <mitz@apple.com> |
| |
| [Xcode] JSVALUE_MODEL is unused |
| https://bugs.webkit.org/show_bug.cgi?id=183809 |
| |
| Reviewed by Tim Horton. |
| |
| * Configurations/JavaScriptCore.xcconfig: Removed the unused definition. |
| |
| 2018-03-20 Tim Horton <timothy_horton@apple.com> |
| |
| Update the install name for JavaScriptCore when built with WK_ALTERNATE_FRAMEWORKS_DIR |
| https://bugs.webkit.org/show_bug.cgi?id=183808 |
| <rdar://problem/38692079> |
| |
| Reviewed by Dan Bernstein. |
| |
| * Configurations/JavaScriptCore.xcconfig: |
| |
| 2018-03-20 Tim Horton <timothy_horton@apple.com> |
| |
| Enable the minimal simulator feature flag when appropriate |
| https://bugs.webkit.org/show_bug.cgi?id=183807 |
| |
| Reviewed by Dan Bernstein. |
| |
| * Configurations/FeatureDefines.xcconfig: |
| |
| 2018-03-20 Saam Barati <sbarati@apple.com> |
| |
| We need to do proper bookkeeping of exitOK when inserting constants when sinking NewArrayBuffer |
| https://bugs.webkit.org/show_bug.cgi?id=183795 |
| <rdar://problem/38298694> |
| |
| Reviewed by JF Bastien. |
| |
| We were just assuming that the constants we were inserting were |
| always exitOK=true. However, this breaks validation. The exitOK |
| we emit for the constants in the NewArrayBuffer should respect |
| the current exit state of the IR we've emitted. This is just IR |
| bookkeeping since JSConstant is a non-exiting node. |
| |
| * dfg/DFGArgumentsEliminationPhase.cpp: |
| |
| 2018-03-20 Guillaume Emont <guijemont@igalia.com> |
| |
| MIPS+Armv7 builds are broken since r229391 |
| https://bugs.webkit.org/show_bug.cgi?id=183474 |
| |
| Reviewed by Yusuke Suzuki. |
| |
| Add missing armv7 and mips operations and fix arguments to a call to |
| operationGetByValCell. This should fix compilation on MIPS and Armv7 |
| (though it does not implement the missing setupArguments stuff in |
| CCallHelpers). |
| |
| * assembler/MacroAssembler.h: |
| * assembler/MacroAssemblerARMv7.h: |
| (JSC::MacroAssemblerARMv7::swap): |
| * assembler/MacroAssemblerMIPS.h: |
| (JSC::MacroAssemblerMIPS::swap): |
| * dfg/DFGSpeculativeJIT32_64.cpp: |
| (JSC::DFG::SpeculativeJIT::compile): |
| * jit/FPRInfo.h: |
| |
| 2018-03-20 Tim Horton <timothy_horton@apple.com> |
| |
| Add and adopt WK_PLATFORM_NAME and adjust default feature defines |
| https://bugs.webkit.org/show_bug.cgi?id=183758 |
| <rdar://problem/38017644> |
| |
| Reviewed by Dan Bernstein. |
| |
| * Configurations/FeatureDefines.xcconfig: |
| |
| 2018-03-20 Mark Lam <mark.lam@apple.com> |
| |
| Improve FunctionPtr and use it in the JIT CallRecord. |
| https://bugs.webkit.org/show_bug.cgi?id=183756 |
| <rdar://problem/38641335> |
| |
| Reviewed by JF Bastien. |
| |
| 1. FunctionPtr hold a C/C++ function pointer by default. Change its default |
| PtrTag to reflect that. |
| |
| 2. Delete the FunctionPtr::value() method. It is effectively a duplicate of |
| executableAddress(). |
| |
| 3. Fix the FunctionPtr constructor that takes arbitrary pointers to be able to |
| take "any" pointer. "any" in this case means that the pointer may not be typed |
| as a C/C++ function to the C++ compiler (due to upstream casting or usage of |
| void* as a storage type), but it is still expected to be pointing to a C/C++ |
| function. |
| |
| 4. Added a FunctionPtr constructor that takes another FunctionPtr. This is a |
| convenience constructor that lets us retag the underlying pointer. The other |
| FunctionPtr is still expected to point to a C/C++ function. |
| |
| 5. Added PtrTag assertion placeholder functions to be implemented later. |
| |
| 6. Change the JIT CallRecord to embed a FunctionPtr callee instead of a void* to |
| pointer. This improves type safety, and assists in getting pointer tagging |
| right later. |
| |
| 7. Added versions of JIT callOperations methods that will take a PtrTag. |
| This is preparation for more more pointer tagging work later. |
| |
| * assembler/MacroAssemblerARM.h: |
| (JSC::MacroAssemblerARM::linkCall): |
| * assembler/MacroAssemblerARMv7.h: |
| (JSC::MacroAssemblerARMv7::linkCall): |
| * assembler/MacroAssemblerCodeRef.h: |
| (JSC::FunctionPtr::FunctionPtr): |
| (JSC::FunctionPtr::operator bool const): |
| (JSC::FunctionPtr::operator! const): |
| (JSC::ReturnAddressPtr::ReturnAddressPtr): |
| (JSC::MacroAssemblerCodePtr::retagged const): |
| (JSC::MacroAssemblerCodeRef::retaggedCode const): |
| (JSC::FunctionPtr::value const): Deleted. |
| * assembler/MacroAssemblerMIPS.h: |
| (JSC::MacroAssemblerMIPS::linkCall): |
| * assembler/MacroAssemblerX86.h: |
| (JSC::MacroAssemblerX86::linkCall): |
| * assembler/MacroAssemblerX86_64.h: |
| (JSC::MacroAssemblerX86_64::callWithSlowPathReturnType): |
| (JSC::MacroAssemblerX86_64::linkCall): |
| * bytecode/AccessCase.cpp: |
| (JSC::AccessCase::generateImpl): |
| * ftl/FTLSlowPathCall.cpp: |
| (JSC::FTL::SlowPathCallContext::makeCall): |
| * ftl/FTLSlowPathCall.h: |
| (JSC::FTL::callOperation): |
| * ftl/FTLThunks.cpp: |
| (JSC::FTL::osrExitGenerationThunkGenerator): |
| (JSC::FTL::lazySlowPathGenerationThunkGenerator): |
| (JSC::FTL::slowPathCallThunkGenerator): |
| * jit/JIT.cpp: |
| (JSC::JIT::link): |
| (JSC::JIT::privateCompileExceptionHandlers): |
| * jit/JIT.h: |
| (JSC::CallRecord::CallRecord): |
| (JSC::JIT::appendCall): |
| (JSC::JIT::appendCallWithSlowPathReturnType): |
| (JSC::JIT::callOperation): |
| (JSC::JIT::callOperationWithProfile): |
| (JSC::JIT::callOperationWithResult): |
| (JSC::JIT::callOperationNoExceptionCheck): |
| (JSC::JIT::callOperationWithCallFrameRollbackOnException): |
| * jit/JITArithmetic.cpp: |
| (JSC::JIT::emitMathICFast): |
| (JSC::JIT::emitMathICSlow): |
| * jit/JITInlines.h: |
| (JSC::JIT::emitNakedCall): |
| (JSC::JIT::emitNakedTailCall): |
| (JSC::JIT::appendCallWithExceptionCheck): |
| (JSC::JIT::appendCallWithExceptionCheckAndSlowPathReturnType): |
| (JSC::JIT::appendCallWithCallFrameRollbackOnException): |
| (JSC::JIT::appendCallWithExceptionCheckSetJSValueResult): |
| (JSC::JIT::appendCallWithExceptionCheckSetJSValueResultWithProfile): |
| * jit/JITPropertyAccess.cpp: |
| (JSC::JIT::emitSlow_op_get_by_val): |
| (JSC::JIT::emitSlow_op_put_by_val): |
| (JSC::JIT::privateCompileGetByValWithCachedId): |
| (JSC::JIT::privateCompilePutByVal): |
| (JSC::JIT::privateCompilePutByValWithCachedId): |
| * jit/JITPropertyAccess32_64.cpp: |
| (JSC::JIT::emitSlow_op_put_by_val): |
| * jit/Repatch.cpp: |
| (JSC::linkPolymorphicCall): |
| * jit/SlowPathCall.h: |
| (JSC::JITSlowPathCall::JITSlowPathCall): |
| (JSC::JITSlowPathCall::call): |
| * jit/ThunkGenerators.cpp: |
| (JSC::nativeForGenerator): |
| * runtime/PtrTag.h: |
| (JSC::nextPtrTagID): |
| (JSC::assertIsCFunctionPtr): |
| (JSC::assertIsNullOrCFunctionPtr): |
| (JSC::assertIsNotTagged): |
| (JSC::assertIsTagged): |
| (JSC::assertIsNullOrTagged): |
| (JSC::assertIsTaggedWith): |
| (JSC::assertIsNullOrTaggedWith): |
| (JSC::uniquePtrTagID): Deleted. |
| |
| 2018-03-20 Stanislav Ocovaj <stanislav.ocovaj@rt-rk.com> |
| |
| [MIPS] Optimize generated JIT code for loads/stores |
| https://bugs.webkit.org/show_bug.cgi?id=183243 |
| |
| Reviewed by Yusuke Suzuki. |
| |
| JIT generates three MIPS instructions for a load/store from/to an absolute address: |
| |
| lui adrTmpReg, address >> 16 |
| ori adrTmpReg, address & 0xffff |
| lw dataReg, 0(adrTmpReg) |
| |
| Since load/store instructions on MIPS have a 16-bit offset, lower 16 bits of the address can |
| be encoded into the load/store and ori instruction can be removed: |
| |
| lui adrTmpReg, (address + 0x8000) >> 16 |
| lw dataReg, (address & 0xffff)(adrTmpReg) |
| |
| Also, in loads/stores with BaseIndex address, the left shift can be omitted if address.scale is 0. |
| |
| * assembler/MacroAssemblerMIPS.h: |
| (JSC::MacroAssemblerMIPS::add32): |
| (JSC::MacroAssemblerMIPS::add64): |
| (JSC::MacroAssemblerMIPS::or32): |
| (JSC::MacroAssemblerMIPS::sub32): |
| (JSC::MacroAssemblerMIPS::convertibleLoadPtr): |
| (JSC::MacroAssemblerMIPS::load8): |
| (JSC::MacroAssemblerMIPS::load8SignedExtendTo32): |
| (JSC::MacroAssemblerMIPS::load32): |
| (JSC::MacroAssemblerMIPS::store8): |
| (JSC::MacroAssemblerMIPS::store32): |
| (JSC::MacroAssemblerMIPS::branchTest8): |
| (JSC::MacroAssemblerMIPS::branchAdd32): |
| (JSC::MacroAssemblerMIPS::loadDouble): |
| (JSC::MacroAssemblerMIPS::storeDouble): |
| |
| 2018-03-16 Yusuke Suzuki <utatane.tea@gmail.com> |
| |
| [DFG][FTL] Add vectorLengthHint for NewArray |
| https://bugs.webkit.org/show_bug.cgi?id=183694 |
| |
| Reviewed by Saam Barati. |
| |
| While the following code is a common, it is not so efficient. |
| |
| var array = []; |
| for (...) { |
| ... |
| array.push(...); |
| } |
| |
| The array is always allocated with 0 vector length. And it is eventually grown. |
| |
| We have ArrayAllocationProfile, and it tells us that the vector length hint for |
| the allocated arrays. This hint is already used for NewArrayBuffer. This patch |
| extends this support for NewArray DFG node. |
| |
| This patch improves Kraken/stanford-crypto-aes 4%. |
| |
| baseline patched |
| |
| stanford-crypto-aes 64.069+-1.352 61.589+-1.274 might be 1.0403x faster |
| |
| NewArray can be optimized. |
| |
| baseline patched |
| |
| vector-length-hint-new-array 21.8157+-0.0882 ^ 13.1764+-0.0942 ^ definitely 1.6557x faster |
| vector-length-hint-array-constructor 21.9076+-0.0987 ? 22.1168+-0.4814 ? |
| |
| * dfg/DFGByteCodeParser.cpp: |
| (JSC::DFG::ByteCodeParser::handleConstantInternalFunction): |
| (JSC::DFG::ByteCodeParser::parseBlock): |
| * dfg/DFGNode.h: |
| (JSC::DFG::Node::hasVectorLengthHint): |
| (JSC::DFG::Node::vectorLengthHint): |
| * dfg/DFGSpeculativeJIT64.cpp: |
| (JSC::DFG::SpeculativeJIT::compile): |
| * ftl/FTLLowerDFGToB3.cpp: |
| (JSC::FTL::DFG::LowerDFGToB3::compileNewArray): |
| |
| 2018-03-13 Yusuke Suzuki <utatane.tea@gmail.com> |
| |
| [DFG][FTL] Make ArraySlice(0) code tight |
| https://bugs.webkit.org/show_bug.cgi?id=183590 |
| |
| Reviewed by Saam Barati. |
| |
| This patch tightens ArraySlice code, in particular, startIndex = 0 case. |
| |
| 1. We support array.slice() call. This is a well-used way to clone array. |
| For example, underscore.js uses this technique. |
| |
| 2. We remove several checks if the given index value is a proven constant. |
| |
| * dfg/DFGBackwardsPropagationPhase.cpp: |
| (JSC::DFG::BackwardsPropagationPhase::propagate): |
| * dfg/DFGByteCodeParser.cpp: |
| (JSC::DFG::ByteCodeParser::handleIntrinsicCall): |
| * dfg/DFGFixupPhase.cpp: |
| (JSC::DFG::FixupPhase::fixupNode): |
| * dfg/DFGSpeculativeJIT.cpp: |
| (JSC::DFG::SpeculativeJIT::emitPopulateSliceIndex): |
| (JSC::DFG::SpeculativeJIT::compileArraySlice): |
| We can skip some of checks if the given value is a proven constant. |
| |
| * ftl/FTLLowerDFGToB3.cpp: |
| (JSC::FTL::DFG::LowerDFGToB3::compileArraySlice): |
| Change below to belowOrEqual. It does not change meaning in the code. But it allows us |
| to fold BelowEqual(0, x) to true. |
| |
| 2018-03-19 Yusuke Suzuki <utatane.tea@gmail.com> |
| |
| Drop s_exceptionInstructions static initializer |
| https://bugs.webkit.org/show_bug.cgi?id=183732 |
| |
| Reviewed by Darin Adler. |
| |
| Make Instruction constructor constexpr to drop the static constructor |
| of LLInt::Data::s_exceptionInstructions. |
| |
| * bytecode/Instruction.h: |
| (JSC::Instruction::Instruction): |
| |
| 2018-03-19 Dan Bernstein <mitz@apple.com> |
| |
| Investigate why __cpu_indicator_init is used |
| https://bugs.webkit.org/show_bug.cgi?id=183736 |
| |
| Reviewed by Tim Horton. |
| |
| __cpu_indicator_init, which is a global initializer, was included in JavaScriptCore because |
| we were passing the -all_load option to the linker, causing it to bring in all members of |
| every static library being linked in, including the compiler runtime library. We only need |
| to load all members of WTF. The linker option for doing that is -force_load, and it requires |
| a path to the library. To support building against libWTF.a built locally as well as against |
| the copy that is in the SDK, we add a script build phase that palces a symbolic link to the |
| appropriate libWTF.a under the DerivedSources directory, and pass the path to that symlink |
| to the linker. Also, while cleaning up linker flags, make OTHER_LDFLAGS_HIDE_SYMBOLS less |
| verbose by eliminating every other -Wl, remove redundant -lobjc (libobjc is already listed |
| in the Link Binary With Libraries build phase), remove long-unsupported -Y,3, and stop |
| reexporting libobjc. |
| |
| * Configurations/JavaScriptCore.xcconfig: |
| * JavaScriptCore.xcodeproj/project.pbxproj: |
| |
| 2018-03-19 Jiewen Tan <jiewen_tan@apple.com> |
| |
| Unreviewed, another quick fix for r229699 |
| |
| Restricts ENABLE_WEB_AUTHN to only macOS and iOS. |
| |
| * Configurations/FeatureDefines.xcconfig: |
| |
| 2018-03-19 Mark Lam <mark.lam@apple.com> |
| |
| FunctionPtr should be passed by value. |
| https://bugs.webkit.org/show_bug.cgi?id=183746 |
| <rdar://problem/38625311> |
| |
| Reviewed by JF Bastien. |
| |
| It's meant to be an encapsulation of a C/C++ function pointer. There are cases |
| where we use it to pass JIT compiled code (e.g. the VM thunks/stubs), but they are |
| treated as if they are C/C++ functions. |
| |
| Regardless, there's no need to pass it by reference. |
| |
| * assembler/MacroAssemblerCodeRef.h: |
| * dfg/DFGJITCompiler.h: |
| (JSC::DFG::JITCompiler::appendCall): |
| * dfg/DFGSpeculativeJIT.h: |
| (JSC::DFG::SpeculativeJIT::appendCall): |
| (JSC::DFG::SpeculativeJIT::appendCallWithCallFrameRollbackOnException): |
| (JSC::DFG::SpeculativeJIT::appendCallWithCallFrameRollbackOnExceptionSetResult): |
| (JSC::DFG::SpeculativeJIT::appendCallSetResult): |
| * jit/JIT.h: |
| (JSC::JIT::appendCall): |
| (JSC::JIT::appendCallWithSlowPathReturnType): |
| * jit/JITInlines.h: |
| (JSC::JIT::appendCallWithExceptionCheck): |
| (JSC::JIT::appendCallWithExceptionCheckAndSlowPathReturnType): |
| (JSC::JIT::appendCallWithCallFrameRollbackOnException): |
| (JSC::JIT::appendCallWithExceptionCheckSetJSValueResult): |
| (JSC::JIT::appendCallWithExceptionCheckSetJSValueResultWithProfile): |
| |
| 2018-03-15 Ross Kirsling <ross.kirsling@sony.com> |
| |
| Fix MSVC run-time check after r229391. |
| https://bugs.webkit.org/show_bug.cgi?id=183673 |
| |
| Reviewed by Keith Miller. |
| |
| Replaces attempted fix from r229424/r229432. |
| Apparently MSVC doesn't like it when a zero-length std::array is defined without explicit braces. |
| |
| * jit/CCallHelpers.h: |
| (JSC::CCallHelpers::clampArrayToSize): |
| |
| 2018-03-15 Tim Horton <timothy_horton@apple.com> |
| |
| Add and adopt WK_ALTERNATE_FRAMEWORKS_DIR in ANGLE |
| https://bugs.webkit.org/show_bug.cgi?id=183675 |
| <rdar://problem/38515281> |
| |
| Reviewed by Dan Bernstein. |
| |
| * JavaScriptCore.xcodeproj/project.pbxproj: |
| Don't install the JSC alias if we're installing to an alternate location. |
| This should have been a part of r229637. |
| |
| 2018-03-15 Tim Horton <timothy_horton@apple.com> |
| |
| Add and adopt WK_ALTERNATE_FRAMEWORKS_DIR in JavaScriptCore |
| https://bugs.webkit.org/show_bug.cgi?id=183649 |
| <rdar://problem/38480526> |
| |
| Reviewed by Dan Bernstein. |
| |
| * Configurations/Base.xcconfig: |
| * JavaScriptCore.xcodeproj/project.pbxproj: |
| |
| 2018-03-14 Mark Lam <mark.lam@apple.com> |
| |
| Enhance the MacroAssembler and LinkBuffer to support pointer profiling. |
| https://bugs.webkit.org/show_bug.cgi?id=183623 |
| <rdar://problem/38443314> |
| |
| Reviewed by Michael Saboff. |
| |
| 1. Added a PtrTag argument to indirect call() and indirect jump() MacroAssembler |
| emitters to support pointer profiling. |
| |
| 2. Also added tagPtr(), untagPtr(), and removePtrTag() placeholder methods. |
| |
| 3. Added a PtrTag to LinkBuffer finalizeCodeWithoutDisassembly() and clients. |
| |
| 4. Updated clients to pass a PtrTag. For the most part, I just apply NoPtrTag as |
| a placeholder until we have time to analyze what pointer profile each client |
| site has later. |
| |
| 5. Apply PtrTags to the YarrJIT. |
| |
| * assembler/ARM64Assembler.h: |
| (JSC::ARM64Assembler::linkJumpOrCall): |
| * assembler/AbstractMacroAssembler.h: |
| (JSC::AbstractMacroAssembler::getLinkerAddress): |
| (JSC::AbstractMacroAssembler::tagPtr): |
| (JSC::AbstractMacroAssembler::untagPtr): |
| (JSC::AbstractMacroAssembler::removePtrTag): |
| * assembler/LinkBuffer.cpp: |
| (JSC::LinkBuffer::finalizeCodeWithoutDisassembly): |
| (JSC::LinkBuffer::finalizeCodeWithDisassembly): |
| * assembler/LinkBuffer.h: |
| (JSC::LinkBuffer::link): |
| (JSC::LinkBuffer::locationOfNearCall): |
| (JSC::LinkBuffer::locationOf): |
| * assembler/MacroAssemblerARM.h: |
| (JSC::MacroAssemblerARM::jump): |
| (JSC::MacroAssemblerARM::call): |
| (JSC::MacroAssemblerARM::readCallTarget): |
| * assembler/MacroAssemblerARM64.h: |
| (JSC::MacroAssemblerARM64::call): |
| (JSC::MacroAssemblerARM64::jump): |
| (JSC::MacroAssemblerARM64::readCallTarget): |
| (JSC::MacroAssemblerARM64::linkCall): |
| * assembler/MacroAssemblerARMv7.h: |
| (JSC::MacroAssemblerARMv7::jump): |
| (JSC::MacroAssemblerARMv7::relativeTableJump): |
| (JSC::MacroAssemblerARMv7::call): |
| (JSC::MacroAssemblerARMv7::readCallTarget): |
| * assembler/MacroAssemblerCodeRef.cpp: |
| (JSC::MacroAssemblerCodePtr::createLLIntCodePtr): |
| (JSC::MacroAssemblerCodeRef::createLLIntCodeRef): |
| * assembler/MacroAssemblerCodeRef.h: |
| (JSC::FunctionPtr::FunctionPtr): |
| (JSC::FunctionPtr::value const): |
| (JSC::MacroAssemblerCodePtr:: const): |
| (JSC::MacroAssemblerCodeRef::MacroAssemblerCodeRef): |
| (JSC::MacroAssemblerCodeRef::retaggedCode const): |
| * assembler/MacroAssemblerMIPS.h: |
| (JSC::MacroAssemblerMIPS::jump): |
| (JSC::MacroAssemblerMIPS::call): |
| (JSC::MacroAssemblerMIPS::readCallTarget): |
| * assembler/MacroAssemblerX86.h: |
| (JSC::MacroAssemblerX86::call): |
| (JSC::MacroAssemblerX86::jump): |
| (JSC::MacroAssemblerX86::readCallTarget): |
| * assembler/MacroAssemblerX86Common.cpp: |
| (JSC::MacroAssembler::probe): |
| * assembler/MacroAssemblerX86Common.h: |
| (JSC::MacroAssemblerX86Common::jump): |
| (JSC::MacroAssemblerX86Common::call): |
| * assembler/MacroAssemblerX86_64.h: |
| (JSC::MacroAssemblerX86_64::call): |
| (JSC::MacroAssemblerX86_64::jump): |
| (JSC::MacroAssemblerX86_64::readCallTarget): |
| * assembler/testmasm.cpp: |
| (JSC::compile): |
| (JSC::invoke): |
| * b3/B3Compile.cpp: |
| (JSC::B3::compile): |
| * b3/B3LowerMacros.cpp: |
| * b3/air/AirCCallSpecial.cpp: |
| (JSC::B3::Air::CCallSpecial::generate): |
| * b3/air/testair.cpp: |
| * b3/testb3.cpp: |
| (JSC::B3::invoke): |
| (JSC::B3::testInterpreter): |
| (JSC::B3::testEntrySwitchSimple): |
| (JSC::B3::testEntrySwitchNoEntrySwitch): |
| (JSC::B3::testEntrySwitchWithCommonPaths): |
| (JSC::B3::testEntrySwitchWithCommonPathsAndNonTrivialEntrypoint): |
| (JSC::B3::testEntrySwitchLoop): |
| * bytecode/AccessCase.cpp: |
| (JSC::AccessCase::generateImpl): |
| * bytecode/AccessCaseSnippetParams.cpp: |
| (JSC::SlowPathCallGeneratorWithArguments::generateImpl): |
| * bytecode/InlineAccess.cpp: |
| (JSC::linkCodeInline): |
| (JSC::InlineAccess::rewireStubAsJump): |
| * bytecode/PolymorphicAccess.cpp: |
| (JSC::AccessGenerationState::emitExplicitExceptionHandler): |
| (JSC::PolymorphicAccess::regenerate): |
| * dfg/DFGJITCompiler.cpp: |
| (JSC::DFG::JITCompiler::compileExceptionHandlers): |
| (JSC::DFG::JITCompiler::link): |
| (JSC::DFG::JITCompiler::compileFunction): |
| (JSC::DFG::JITCompiler::noticeCatchEntrypoint): |
| * dfg/DFGJITCompiler.h: |
| (JSC::DFG::JITCompiler::appendCall): |
| * dfg/DFGJITFinalizer.cpp: |
| (JSC::DFG::JITFinalizer::finalize): |
| (JSC::DFG::JITFinalizer::finalizeFunction): |
| * dfg/DFGOSRExit.cpp: |
| (JSC::DFG::OSRExit::emitRestoreArguments): |
| (JSC::DFG::OSRExit::compileOSRExit): |
| * dfg/DFGOSRExitCompilerCommon.cpp: |
| (JSC::DFG::handleExitCounts): |
| (JSC::DFG::osrWriteBarrier): |
| (JSC::DFG::adjustAndJumpToTarget): |
| * dfg/DFGSpeculativeJIT.cpp: |
| (JSC::DFG::SpeculativeJIT::emitSwitchIntJump): |
| (JSC::DFG::SpeculativeJIT::emitSwitchImm): |
| (JSC::DFG::SpeculativeJIT::emitSwitchStringOnString): |
| * dfg/DFGSpeculativeJIT64.cpp: |
| (JSC::DFG::SpeculativeJIT::compile): |
| * dfg/DFGThunks.cpp: |
| (JSC::DFG::osrExitThunkGenerator): |
| (JSC::DFG::osrExitGenerationThunkGenerator): |
| (JSC::DFG::osrEntryThunkGenerator): |
| * ftl/FTLCompile.cpp: |
| (JSC::FTL::compile): |
| * ftl/FTLJITFinalizer.cpp: |
| (JSC::FTL::JITFinalizer::finalizeCommon): |
| * ftl/FTLLazySlowPath.cpp: |
| (JSC::FTL::LazySlowPath::generate): |
| * ftl/FTLLink.cpp: |
| (JSC::FTL::link): |
| * ftl/FTLLowerDFGToB3.cpp: |
| (JSC::FTL::DFG::LowerDFGToB3::lower): |
| (JSC::FTL::DFG::LowerDFGToB3::compileCallOrConstructVarargsSpread): |
| (JSC::FTL::DFG::LowerDFGToB3::compileCallOrConstructVarargs): |
| (JSC::FTL::DFG::LowerDFGToB3::compileCallEval): |
| * ftl/FTLOSRExitCompiler.cpp: |
| (JSC::FTL::compileStub): |
| (JSC::FTL::compileFTLOSRExit): |
| * ftl/FTLSlowPathCall.cpp: |
| (JSC::FTL::SlowPathCallContext::makeCall): |
| * ftl/FTLThunks.cpp: |
| (JSC::FTL::genericGenerationThunkGenerator): |
| (JSC::FTL::osrExitGenerationThunkGenerator): |
| (JSC::FTL::lazySlowPathGenerationThunkGenerator): |
| (JSC::FTL::slowPathCallThunkGenerator): |
| * jit/AssemblyHelpers.cpp: |
| (JSC::AssemblyHelpers::callExceptionFuzz): |
| (JSC::AssemblyHelpers::debugCall): |
| * jit/CCallHelpers.cpp: |
| (JSC::CCallHelpers::ensureShadowChickenPacket): |
| * jit/CCallHelpers.h: |
| (JSC::CCallHelpers::jumpToExceptionHandler): |
| * jit/ExecutableAllocator.cpp: |
| (JSC::FixedVMPoolExecutableAllocator::jitWriteThunkGenerator): |
| * jit/JIT.cpp: |
| (JSC::JIT::emitEnterOptimizationCheck): |
| (JSC::JIT::link): |
| (JSC::JIT::privateCompileExceptionHandlers): |
| * jit/JIT.h: |
| (JSC::JIT::appendCall): |
| * jit/JITMathIC.h: |
| (JSC::isProfileEmpty): |
| * jit/JITOpcodes.cpp: |
| (JSC::JIT::emit_op_catch): |
| (JSC::JIT::emit_op_switch_imm): |
| (JSC::JIT::emit_op_switch_char): |
| (JSC::JIT::emit_op_switch_string): |
| (JSC::JIT::emitSlow_op_loop_hint): |
| (JSC::JIT::privateCompileHasIndexedProperty): |
| * jit/JITOpcodes32_64.cpp: |
| (JSC::JIT::emit_op_catch): |
| (JSC::JIT::emit_op_switch_imm): |
| (JSC::JIT::emit_op_switch_char): |
| (JSC::JIT::emit_op_switch_string): |
| (JSC::JIT::privateCompileHasIndexedProperty): |
| * jit/JITPropertyAccess.cpp: |
| (JSC::JIT::stringGetByValStubGenerator): |
| (JSC::JIT::privateCompileGetByVal): |
| (JSC::JIT::privateCompileGetByValWithCachedId): |
| (JSC::JIT::privateCompilePutByVal): |
| (JSC::JIT::privateCompilePutByValWithCachedId): |
| * jit/JITPropertyAccess32_64.cpp: |
| (JSC::JIT::stringGetByValStubGenerator): |
| * jit/JITStubRoutine.h: |
| * jit/Repatch.cpp: |
| (JSC::readCallTarget): |
| (JSC::appropriateOptimizingPutByIdFunction): |
| (JSC::linkPolymorphicCall): |
| (JSC::resetPutByID): |
| * jit/SlowPathCall.h: |
| (JSC::JITSlowPathCall::call): |
| * jit/SpecializedThunkJIT.h: |
| (JSC::SpecializedThunkJIT::finalize): |
| (JSC::SpecializedThunkJIT::callDoubleToDouble): |
| * jit/ThunkGenerators.cpp: |
| (JSC::throwExceptionFromCallSlowPathGenerator): |
| (JSC::slowPathFor): |
| (JSC::linkCallThunkGenerator): |
| (JSC::linkPolymorphicCallThunkGenerator): |
| (JSC::virtualThunkFor): |
| (JSC::nativeForGenerator): |
| (JSC::arityFixupGenerator): |
| (JSC::unreachableGenerator): |
| (JSC::boundThisNoArgsFunctionCallGenerator): |
| * llint/LLIntThunks.cpp: |
| (JSC::LLInt::generateThunkWithJumpTo): |
| (JSC::LLInt::functionForCallEntryThunkGenerator): |
| (JSC::LLInt::functionForConstructEntryThunkGenerator): |
| (JSC::LLInt::functionForCallArityCheckThunkGenerator): |
| (JSC::LLInt::functionForConstructArityCheckThunkGenerator): |
| (JSC::LLInt::evalEntryThunkGenerator): |
| (JSC::LLInt::programEntryThunkGenerator): |
| (JSC::LLInt::moduleProgramEntryThunkGenerator): |
| * runtime/PtrTag.h: |
| * wasm/WasmB3IRGenerator.cpp: |
| (JSC::Wasm::B3IRGenerator::addCall): |
| (JSC::Wasm::B3IRGenerator::addCallIndirect): |
| * wasm/WasmBBQPlan.cpp: |
| (JSC::Wasm::BBQPlan::complete): |
| * wasm/WasmBinding.cpp: |
| (JSC::Wasm::wasmToWasm): |
| * wasm/WasmOMGPlan.cpp: |
| (JSC::Wasm::OMGPlan::work): |
| * wasm/WasmThunks.cpp: |
| (JSC::Wasm::throwExceptionFromWasmThunkGenerator): |
| (JSC::Wasm::throwStackOverflowFromWasmThunkGenerator): |
| (JSC::Wasm::triggerOMGTierUpThunkGenerator): |
| * wasm/js/WasmToJS.cpp: |
| (JSC::Wasm::handleBadI64Use): |
| (JSC::Wasm::wasmToJS): |
| * yarr/YarrJIT.cpp: |
| (JSC::Yarr::YarrGenerator::loadFromFrameAndJump): |
| (JSC::Yarr::YarrGenerator::BacktrackingState::linkDataLabels): |
| (JSC::Yarr::YarrGenerator::generateTryReadUnicodeCharacterHelper): |
| (JSC::Yarr::YarrGenerator::generateEnter): |
| (JSC::Yarr::YarrGenerator::YarrGenerator): |
| (JSC::Yarr::YarrGenerator::compile): |
| (JSC::Yarr::jitCompile): |
| * yarr/YarrJIT.h: |
| (JSC::Yarr::YarrCodeBlock::execute): |
| |
| 2018-03-14 Caitlin Potter <caitp@igalia.com> |
| |
| [JSC] fix order of evaluation for ClassDefinitionEvaluation |
| https://bugs.webkit.org/show_bug.cgi?id=183523 |
| |
| Reviewed by Keith Miller. |
| |
| Computed property names need to be evaluated in source order during class |
| definition evaluation, as it's observable (and specified to work this way). |
| |
| This change improves compatibility with Chromium. |
| |
| * bytecompiler/BytecodeGenerator.h: |
| (JSC::BytecodeGenerator::emitDefineClassElements): |
| * bytecompiler/NodesCodegen.cpp: |
| (JSC::PropertyListNode::emitBytecode): |
| (JSC::ClassExprNode::emitBytecode): |
| * parser/ASTBuilder.h: |
| (JSC::ASTBuilder::createClassExpr): |
| (JSC::ASTBuilder::createGetterOrSetterProperty): |
| (JSC::ASTBuilder::createProperty): |
| * parser/NodeConstructors.h: |
| (JSC::PropertyNode::PropertyNode): |
| (JSC::ClassExprNode::ClassExprNode): |
| * parser/Nodes.cpp: |
| (JSC::PropertyListNode::hasStaticallyNamedProperty): |
| * parser/Nodes.h: |
| (JSC::PropertyNode::isClassProperty const): |
| (JSC::PropertyNode::isStaticClassProperty const): |
| (JSC::PropertyNode::isInstanceClassProperty const): |
| * parser/Parser.cpp: |
| (JSC::Parser<LexerType>::parseClass): |
| (JSC::Parser<LexerType>::parseProperty): |
| (JSC::Parser<LexerType>::parseGetterSetter): |
| * parser/Parser.h: |
| * parser/SyntaxChecker.h: |
| (JSC::SyntaxChecker::createClassExpr): |
| (JSC::SyntaxChecker::createProperty): |
| (JSC::SyntaxChecker::createGetterOrSetterProperty): |
| |
| 2018-03-14 Keith Miller <keith_miller@apple.com> |
| |
| Move jsc CLI breakpoint function to $vm |
| https://bugs.webkit.org/show_bug.cgi?id=183512 |
| |
| Reviewed by Yusuke Suzuki. |
| |
| * jsc.cpp: |
| (GlobalObject::finishCreation): |
| (functionBreakpoint): Deleted. |
| * tools/JSDollarVM.cpp: |
| (JSC::functionBreakpoint): |
| (JSC::JSDollarVM::finishCreation): |
| |
| 2018-03-14 Tim Horton <timothy_horton@apple.com> |
| |
| Fix the build after r229567 |
| |
| * Configurations/FeatureDefines.xcconfig: |
| |
| 2018-03-12 Mark Lam <mark.lam@apple.com> |
| |
| Gardening: speculative build fix for WinCairo. |
| https://bugs.webkit.org/show_bug.cgi?id=183573 |
| |
| Not reviewed. |
| |
| * runtime/NativeFunction.h: |
| (JSC::TaggedNativeFunction::TaggedNativeFunction): |
| |
| 2018-03-12 Yusuke Suzuki <utatane.tea@gmail.com> |
| |
| Unreviewed, fix obsolete ASSERT |
| https://bugs.webkit.org/show_bug.cgi?id=183310 |
| |
| Now NewObject can be conereted from CallObjectConstructor and CreateThis. |
| |
| * dfg/DFGNode.h: |
| (JSC::DFG::Node::convertToNewObject): |
| |
| 2018-03-12 Tim Horton <timothy_horton@apple.com> |
| |
| Stop using SDK conditionals to control feature definitions |
| https://bugs.webkit.org/show_bug.cgi?id=183430 |
| <rdar://problem/38251619> |
| |
| Reviewed by Dan Bernstein. |
| |
| * Configurations/FeatureDefines.xcconfig: |
| * Configurations/WebKitTargetConditionals.xcconfig: Renamed. |
| |
| 2018-03-12 Yoav Weiss <yoav@yoav.ws> |
| |
| Runtime flag for link prefetch and remove link subresource. |
| https://bugs.webkit.org/show_bug.cgi?id=183540 |
| |
| Reviewed by Chris Dumez. |
| |
| Remove the LINK_PREFETCH build time flag. |
| |
| * Configurations/FeatureDefines.xcconfig: |
| |
| 2018-03-12 Mark Lam <mark.lam@apple.com> |
| |
| Gardening: speculative build fix for Windows. |
| https://bugs.webkit.org/show_bug.cgi?id=183573 |
| |
| Not reviewed. |
| |
| * runtime/NativeFunction.h: |
| (JSC::TaggedNativeFunction::TaggedNativeFunction): |
| |
| 2018-03-12 Mark Lam <mark.lam@apple.com> |
| |
| Add another PtrTag. |
| https://bugs.webkit.org/show_bug.cgi?id=183580 |
| <rdar://problem/38390584> |
| |
| Reviewed by Keith Miller. |
| |
| * runtime/PtrTag.h: |
| |
| 2018-03-12 Mark Lam <mark.lam@apple.com> |
| |
| Make a NativeFunction into a class to support pointer profiling. |
| https://bugs.webkit.org/show_bug.cgi?id=183573 |
| <rdar://problem/38384697> |
| |
| Reviewed by Filip Pizlo. |
| |
| 1. NativeFunction is now a class, and introducing RawNativeFunction and |
| TaggedNativeFunction. |
| |
| RawNativeFunction is the raw pointer type (equivalent |
| to the old definition of NativeFunction). This is mainly used for underlying |
| storage inside the NativeFunction class, and also for global data tables that |
| cannot embed non-trivially constructed objects. |
| |
| NativeFunction's role is mainly to encapsulate a pointer to a C function that |
| we pass into the VM. |
| |
| TaggedNativeFunction encapsulates the tagged version of a pointer to a C |
| function that we track in the VM. |
| |
| 2. Added a convenience constructor for TrustedImmPtr so that we don't have to |
| cast function pointers to void* anymore when constructing a TrustedImmPtr. |
| |
| 3. Removed the unused CALL_RETURN macro in CommonSlowPaths.cpp. |
| |
| 4. Added more PtrTag utility functions. |
| |
| * CMakeLists.txt: |
| * JavaScriptCore.xcodeproj/project.pbxproj: |
| * assembler/AbstractMacroAssembler.h: |
| (JSC::AbstractMacroAssembler::TrustedImmPtr::TrustedImmPtr): |
| * create_hash_table: |
| * interpreter/Interpreter.cpp: |
| (JSC::Interpreter::executeCall): |
| (JSC::Interpreter::executeConstruct): |
| * interpreter/InterpreterInlines.h: |
| (JSC::Interpreter::getOpcodeID): |
| * jit/JITThunks.cpp: |
| (JSC::JITThunks::hostFunctionStub): |
| * jit/JITThunks.h: |
| * llint/LLIntData.cpp: |
| (JSC::LLInt::initialize): |
| * llint/LLIntSlowPaths.cpp: |
| (JSC::LLInt::setUpCall): |
| * llint/LowLevelInterpreter.asm: |
| * llint/LowLevelInterpreter.cpp: |
| (JSC::CLoop::execute): |
| * llint/LowLevelInterpreter64.asm: |
| * offlineasm/ast.rb: |
| * runtime/CallData.h: |
| * runtime/CommonSlowPaths.cpp: |
| * runtime/ConstructData.h: |
| * runtime/InternalFunction.h: |
| (JSC::InternalFunction::nativeFunctionFor): |
| * runtime/JSCell.cpp: |
| (JSC::JSCell::getCallData): |
| (JSC::JSCell::getConstructData): |
| * runtime/JSFunction.h: |
| * runtime/JSFunctionInlines.h: |
| (JSC::JSFunction::nativeFunction): |
| (JSC::JSFunction::nativeConstructor): |
| (JSC::isHostFunction): |
| * runtime/Lookup.h: |
| (JSC::HashTableValue::function const): |
| (JSC::HashTableValue::accessorGetter const): |
| (JSC::HashTableValue::accessorSetter const): |
| (JSC::nonCachingStaticFunctionGetter): |
| * runtime/NativeExecutable.cpp: |
| (JSC::NativeExecutable::create): |
| (JSC::NativeExecutable::NativeExecutable): |
| * runtime/NativeExecutable.h: |
| * runtime/NativeFunction.h: Added. |
| (JSC::NativeFunction::NativeFunction): |
| (JSC::NativeFunction::operator intptr_t const): |
| (JSC::NativeFunction::operator bool const): |
| (JSC::NativeFunction::operator! const): |
| (JSC::NativeFunction::operator== const): |
| (JSC::NativeFunction::operator!= const): |
| (JSC::NativeFunction::operator()): |
| (JSC::NativeFunction::rawPointer const): |
| (JSC::NativeFunctionHash::hash): |
| (JSC::NativeFunctionHash::equal): |
| (JSC::TaggedNativeFunction::TaggedNativeFunction): |
| (JSC::TaggedNativeFunction::operator bool const): |
| (JSC::TaggedNativeFunction::operator! const): |
| (JSC::TaggedNativeFunction::operator== const): |
| (JSC::TaggedNativeFunction::operator!= const): |
| (JSC::TaggedNativeFunction::operator()): |
| (JSC::TaggedNativeFunction::operator NativeFunction): |
| (JSC::TaggedNativeFunction::rawPointer const): |
| (JSC::TaggedNativeFunctionHash::hash): |
| (JSC::TaggedNativeFunctionHash::equal): |
| * runtime/PtrTag.h: |
| (JSC::tagCFunctionPtr): |
| (JSC::untagCFunctionPtr): |
| * runtime/VM.h: |
| (JSC::VM::targetMachinePCForThrowOffset): Deleted. |
| |
| 2018-03-12 Filip Pizlo <fpizlo@apple.com> |
| |
| Unreviewed, fix simple goof that was causing 32-bit DFG crashes. |
| |
| * dfg/DFGSpeculativeJIT.cpp: |
| (JSC::DFG::SpeculativeJIT::compileCreateDirectArguments): |
| |
| 2018-03-11 Yusuke Suzuki <utatane.tea@gmail.com> |
| |
| [DFG] AI should convert CreateThis to NewObject if the prototype object is proved |
| https://bugs.webkit.org/show_bug.cgi?id=183310 |
| |
| Reviewed by Filip Pizlo. |
| |
| This patch implements CreateThis -> NewObject conversion in AI if the given function is constant. |
| This contributes to 6% win in Octane/raytrace. |
| |
| baseline patched |
| |
| raytrace x2 1.19915+-0.01862 ^ 1.13156+-0.01589 ^ definitely 1.0597x faster |
| |
| * dfg/DFGAbstractInterpreterInlines.h: |
| (JSC::DFG::AbstractInterpreter<AbstractStateType>::executeEffects): |
| * dfg/DFGConstantFoldingPhase.cpp: |
| (JSC::DFG::ConstantFoldingPhase::foldConstants): |
| |
| 2018-03-11 Wenson Hsieh <wenson_hsieh@apple.com> |
| |
| Disable Sigill crash analyzer on watchOS |
| https://bugs.webkit.org/show_bug.cgi?id=183548 |
| <rdar://problem/38338032> |
| |
| Reviewed by Mark Lam. |
| |
| Sigill is not supported on watchOS. |
| |
| * runtime/Options.cpp: |
| (JSC::overrideDefaults): |
| |
| 2018-03-09 Filip Pizlo <fpizlo@apple.com> |
| |
| Split DirectArguments into JSValueOOB and JSValueStrict parts |
| https://bugs.webkit.org/show_bug.cgi?id=183458 |
| |
| Reviewed by Yusuke Suzuki. |
| |
| Our Spectre plan for JSValue objects is to allow inline JSValue stores and loads guarded by |
| unmitigated structure checks. This works because objects reachable from JSValues (i.e. JSValue |
| objects, like String, Symbol, and any descendant of JSObject) will only contain fields that it's OK |
| to read and write within a Spectre mitigation window. Writes are important, because within the |
| window, a write could appear to be made speculatively and rolled out later. This means that: |
| |
| - JSValue objects cannot have lengths, masks, or anything else inline. |
| |
| - JSValue objects cannot have an inline type that is used as part of a Spectre mitigation for a type |
| check, unless that type is in the form of a poison key. |
| |
| This means that the dynamic poisoning that I previously landed for DirectArguments is wrong. It also |
| means that it's wrong for DirectArguments to have an inline length. |
| |
| This changes DirectArguments to use poisoning according to the universal formula: |
| |
| - The random accessed portions are out-of-line, pointed to by a poisoned pointer. |
| |
| - No inline length. |
| |
| Surprisingly, this is perf-neutral. It's probably perf-neutral because our compiler optimizations |
| amortize whatever cost there was. |
| |
| * bytecode/AccessCase.cpp: |
| (JSC::AccessCase::generateWithGuard): |
| * dfg/DFGCallCreateDirectArgumentsSlowPathGenerator.h: |
| (JSC::DFG::CallCreateDirectArgumentsSlowPathGenerator::CallCreateDirectArgumentsSlowPathGenerator): |
| * dfg/DFGCallCreateDirectArgumentsWithKnownLengthSlowPathGenerator.h: Added. |
| (JSC::DFG::CallCreateDirectArgumentsWithKnownLengthSlowPathGenerator::CallCreateDirectArgumentsWithKnownLengthSlowPathGenerator): |
| * dfg/DFGSpeculativeJIT.cpp: |
| (JSC::DFG::SpeculativeJIT::compileGetByValOnDirectArguments): |
| (JSC::DFG::SpeculativeJIT::compileGetArrayLength): |
| (JSC::DFG::SpeculativeJIT::compileCreateDirectArguments): |
| (JSC::DFG::SpeculativeJIT::compileGetFromArguments): |
| (JSC::DFG::SpeculativeJIT::compilePutToArguments): |
| * ftl/FTLAbstractHeapRepository.h: |
| * ftl/FTLLowerDFGToB3.cpp: |
| (JSC::FTL::DFG::LowerDFGToB3::compileGetArrayLength): |
| (JSC::FTL::DFG::LowerDFGToB3::compileGetByVal): |
| (JSC::FTL::DFG::LowerDFGToB3::compileCreateDirectArguments): |
| (JSC::FTL::DFG::LowerDFGToB3::compileGetFromArguments): |
| (JSC::FTL::DFG::LowerDFGToB3::compilePutToArguments): |
| (JSC::FTL::DFG::LowerDFGToB3::compileCheckSubClass): |
| (JSC::FTL::DFG::LowerDFGToB3::allocateVariableSizedHeapCell): |
| (JSC::FTL::DFG::LowerDFGToB3::dynamicPoison): Deleted. |
| (JSC::FTL::DFG::LowerDFGToB3::dynamicPoisonOnLoadedType): Deleted. |
| (JSC::FTL::DFG::LowerDFGToB3::dynamicPoisonOnType): Deleted. |
| * heap/SecurityKind.h: |
| * jit/JITPropertyAccess.cpp: |
| (JSC::JIT::emit_op_get_from_arguments): |
| (JSC::JIT::emit_op_put_to_arguments): |
| (JSC::JIT::emitDirectArgumentsGetByVal): |
| * jit/JITPropertyAccess32_64.cpp: |
| (JSC::JIT::emit_op_get_from_arguments): |
| (JSC::JIT::emit_op_put_to_arguments): |
| * llint/LowLevelInterpreter.asm: |
| * llint/LowLevelInterpreter32_64.asm: |
| * llint/LowLevelInterpreter64.asm: |
| * runtime/DirectArguments.cpp: |
| (JSC::DirectArguments::DirectArguments): |
| (JSC::DirectArguments::createUninitialized): |
| (JSC::DirectArguments::create): |
| (JSC::DirectArguments::createByCopying): |
| (JSC::DirectArguments::estimatedSize): |
| (JSC::DirectArguments::visitChildren): |
| (JSC::DirectArguments::overrideThings): |
| (JSC::DirectArguments::copyToArguments): |
| (JSC::DirectArguments::mappedArgumentsSize): |
| * runtime/DirectArguments.h: |
| * runtime/JSCPoison.h: |
| * runtime/JSLexicalEnvironment.h: |
| * runtime/JSSymbolTableObject.h: |
| * runtime/VM.cpp: |
| (JSC::VM::VM): |
| * runtime/VM.h: |
| |
| 2018-03-11 Yusuke Suzuki <utatane.tea@gmail.com> |
| |
| [B3] Above/Below should be strength-reduced for comparison with 0 |
| https://bugs.webkit.org/show_bug.cgi?id=183543 |
| |
| Reviewed by Filip Pizlo. |
| |
| Above(0, x) and BelowEqual(0, x) can be converted to constants false and true respectively. |
| This can be seen in ArraySlice(0) case: `Select(Above(0, length), length, 0)` this should |
| be converted to `0`. This patch adds such a folding to comparisons. |
| |
| We also fix B3ReduceStrength issue creating an orphan value. If a flipped value is folded to |
| a constant, we do not insert flipped value and make it an orphan. This issue causes JSC test |
| failure with this B3Const32/64Value change. With this patch, we create a flipped value only |
| when we fail to fold it to a constant. |
| |
| * b3/B3Const32Value.cpp: |
| (JSC::B3::Const32Value::lessThanConstant const): |
| (JSC::B3::Const32Value::greaterThanConstant const): |
| (JSC::B3::Const32Value::lessEqualConstant const): |
| (JSC::B3::Const32Value::greaterEqualConstant const): |
| (JSC::B3::Const32Value::aboveConstant const): |
| (JSC::B3::Const32Value::belowConstant const): |
| (JSC::B3::Const32Value::aboveEqualConstant const): |
| (JSC::B3::Const32Value::belowEqualConstant const): |
| * b3/B3Const64Value.cpp: |
| (JSC::B3::Const64Value::lessThanConstant const): |
| (JSC::B3::Const64Value::greaterThanConstant const): |
| (JSC::B3::Const64Value::lessEqualConstant const): |
| (JSC::B3::Const64Value::greaterEqualConstant const): |
| (JSC::B3::Const64Value::aboveConstant const): |
| (JSC::B3::Const64Value::belowConstant const): |
| (JSC::B3::Const64Value::aboveEqualConstant const): |
| (JSC::B3::Const64Value::belowEqualConstant const): |
| * b3/B3ReduceStrength.cpp: |
| * b3/testb3.cpp: |
| (JSC::B3::int64Operands): |
| (JSC::B3::int32Operands): |
| |
| 2018-03-10 Yusuke Suzuki <utatane.tea@gmail.com> |
| |
| [FTL] Drop NewRegexp for String.prototype.match with RegExp + global flag |
| https://bugs.webkit.org/show_bug.cgi?id=181848 |
| |
| Reviewed by Sam Weinig. |
| |
| In r181535, we support `string.match(/nonglobal/)` code. However, `string.match(/global/g)` is not |
| optimized since it sets `lastIndex` value before performing RegExp operation. |
| |
| This patch optimizes the above "with a global flag" case by emitting `SetRegExpObjectLastIndex` properly. |
| RegExpMatchFast is converted to SetRegExpObjectLastIndex and RegExpMatchFastGlobal. The latter node |
| just holds RegExp (not RegExpObject) cell so that it can offer a chance to make NewRegexp PhantomNewRegexp |
| in object allocation sinking phase. |
| |
| Added microbenchmarks shows that this patch makes NewRegexp PhantomNewRegexp even if the given RegExp |
| has a global flag. And it improves the performance. |
| |
| baseline patched |
| |
| regexp-u-global-es5 44.1298+-4.6128 ^ 33.7920+-2.0110 ^ definitely 1.3059x faster |
| regexp-u-global-es6 182.3272+-2.2861 ^ 154.3414+-7.6769 ^ definitely 1.1813x faster |
| |
| * dfg/DFGAbstractInterpreterInlines.h: |
| (JSC::DFG::AbstractInterpreter<AbstractStateType>::executeEffects): |
| * dfg/DFGClobberize.h: |
| (JSC::DFG::clobberize): |
| * dfg/DFGDoesGC.cpp: |
| (JSC::DFG::doesGC): |
| * dfg/DFGFixupPhase.cpp: |
| (JSC::DFG::FixupPhase::fixupNode): |
| * dfg/DFGMayExit.cpp: |
| * dfg/DFGNode.cpp: |
| (JSC::DFG::Node::convertToRegExpMatchFastGlobal): |
| * dfg/DFGNode.h: |
| (JSC::DFG::Node::hasHeapPrediction): |
| (JSC::DFG::Node::hasCellOperand): |
| * dfg/DFGNodeType.h: |
| * dfg/DFGOperations.cpp: |
| * dfg/DFGOperations.h: |
| * dfg/DFGPredictionPropagationPhase.cpp: |
| * dfg/DFGSafeToExecute.h: |
| (JSC::DFG::safeToExecute): |
| * dfg/DFGSpeculativeJIT.cpp: |
| (JSC::DFG::SpeculativeJIT::compileRegExpMatchFastGlobal): |
| * dfg/DFGSpeculativeJIT.h: |
| * dfg/DFGSpeculativeJIT32_64.cpp: |
| (JSC::DFG::SpeculativeJIT::compile): |
| * dfg/DFGSpeculativeJIT64.cpp: |
| (JSC::DFG::SpeculativeJIT::compile): |
| * dfg/DFGStrengthReductionPhase.cpp: |
| (JSC::DFG::StrengthReductionPhase::handleNode): |
| * ftl/FTLCapabilities.cpp: |
| (JSC::FTL::canCompile): |
| * ftl/FTLLowerDFGToB3.cpp: |
| (JSC::FTL::DFG::LowerDFGToB3::compileNode): |
| (JSC::FTL::DFG::LowerDFGToB3::compileRegExpMatchFastGlobal): |
| * runtime/RegExpObject.cpp: |
| (JSC::collectMatches): Deleted. |
| * runtime/RegExpObject.h: |
| * runtime/RegExpObjectInlines.h: |
| (JSC::RegExpObject::execInline): |
| (JSC::RegExpObject::matchInline): |
| (JSC::advanceStringUnicode): |
| (JSC::collectMatches): |
| (JSC::RegExpObject::advanceStringUnicode): Deleted. |
| * runtime/RegExpPrototype.cpp: |
| (JSC::advanceStringIndex): |
| |
| 2018-03-10 Yusuke Suzuki <utatane.tea@gmail.com> |
| |
| B3::reduceStrength should canonicalize integer comparisons |
| https://bugs.webkit.org/show_bug.cgi?id=150958 |
| |
| Reviewed by Filip Pizlo. |
| |
| This patch sorts operands of comparisons by flipping opcode. For example, `Above(0, @2)` is |
| converted to `Below(@2, 0)`. This sorting is the same to handleCommutativity rule. Since we |
| canonicalize comparisons to have constant value at least on the right hand side, we can |
| remove pattern matchings checking leftImm in B3LowerToAir. |
| |
| Since this flipping changes the opcode of the value, to achieve safely, we just create a |
| new value which has flipped opcode and swapped operands. If we can fold it to a constant, |
| we replace m_value with this constant. If we fail to fold it to constant, we replace |
| m_value with the flipped one. |
| |
| These comparisons are already handled in testb3. |
| |
| * b3/B3LowerToAir.cpp: |
| * b3/B3ReduceStrength.cpp: |
| |
| 2018-03-09 Mark Lam <mark.lam@apple.com> |
| |
| offlineasm should reset the Assembler's working state before doing another pass for a new target. |
| https://bugs.webkit.org/show_bug.cgi?id=183538 |
| <rdar://problem/38325955> |
| |
| Reviewed by Michael Saboff. |
| |
| * llint/LowLevelInterpreter.cpp: |
| * offlineasm/asm.rb: |
| * offlineasm/cloop.rb: |
| |
| 2018-03-09 Brian Burg <bburg@apple.com> |
| |
| Web Inspector: there should only be one way for async backend commands to send failure |
| https://bugs.webkit.org/show_bug.cgi?id=183524 |
| |
| Reviewed by Timothy Hatcher. |
| |
| If this is an async command, errors should be reported with BackendDispatcher::CallbackBase::sendFailure. |
| To avoid mixups, don't include the ErrorString out-parameter in generated async command signatures. |
| This change only affects interfaces generated for C++ backend dispatchers. |
| |
| * inspector/scripts/codegen/generate_cpp_backend_dispatcher_header.py: |
| (CppBackendDispatcherHeaderGenerator._generate_async_handler_declaration_for_command): |
| * inspector/scripts/codegen/generate_cpp_backend_dispatcher_implementation.py: |
| (CppBackendDispatcherImplementationGenerator._generate_dispatcher_implementation_for_command): |
| * inspector/scripts/tests/generic/expected/commands-with-async-attribute.json-result: |
| |
| 2018-03-09 Mark Lam <mark.lam@apple.com> |
| |
| Build fix after r229476. |
| https://bugs.webkit.org/show_bug.cgi?id=183488 |
| |
| Not reviewed. |
| |
| * runtime/StackAlignment.h: |
| |
| 2018-03-09 Mark Lam <mark.lam@apple.com> |
| |
| [Re-landing] Add support for ARM64E. |
| https://bugs.webkit.org/show_bug.cgi?id=183398 |
| <rdar://problem/38212621> |
| |
| Reviewed by Michael Saboff. |
| |
| * assembler/MacroAssembler.h: |
| * llint/LLIntOfflineAsmConfig.h: |
| * llint/LowLevelInterpreter.asm: |
| * llint/LowLevelInterpreter64.asm: |
| * offlineasm/backends.rb: |
| |
| 2018-03-09 Mark Lam <mark.lam@apple.com> |
| |
| [Re-landing] Prepare LLInt code to support pointer profiling. |
| https://bugs.webkit.org/show_bug.cgi?id=183387 |
| <rdar://problem/38199678> |
| |
| Reviewed by JF Bastien. |
| |
| 1. Introduced PtrTag enums for supporting pointer profiling later. |
| |
| 2. Also introduced tagging, untagging, retagging, and tag removal placeholder |
| template functions for the same purpose. |
| |
| 3. Prepare the offlineasm for supporting pointer profiling later. |
| |
| 4. Tagged some pointers in LLInt asm code. Currently, these should have no |
| effect on behavior. |
| |
| 5. Removed returnToThrowForThrownException() because it is not used anywhere. |
| |
| 6. Added the offlineasm folder to JavaScriptCore Xcode project so that it's |
| easier to view and edit these files in Xcode. |
| |
| * CMakeLists.txt: |
| * JavaScriptCore.xcodeproj/project.pbxproj: |
| * bytecode/LLIntCallLinkInfo.h: |
| (JSC::LLIntCallLinkInfo::unlink): |
| * llint/LLIntData.cpp: |
| (JSC::LLInt::initialize): |
| * llint/LLIntData.h: |
| * llint/LLIntExceptions.cpp: |
| (JSC::LLInt::returnToThrowForThrownException): Deleted. |
| * llint/LLIntExceptions.h: |
| * llint/LLIntOfflineAsmConfig.h: |
| * llint/LLIntOffsetsExtractor.cpp: |
| * llint/LLIntPCRanges.h: |
| (JSC::LLInt::isLLIntPC): |
| * llint/LLIntSlowPaths.cpp: |
| (JSC::LLInt::LLINT_SLOW_PATH_DECL): |
| (JSC::LLInt::handleHostCall): |
| (JSC::LLInt::setUpCall): |
| * llint/LowLevelInterpreter.asm: |
| * llint/LowLevelInterpreter32_64.asm: |
| * llint/LowLevelInterpreter64.asm: |
| * offlineasm/ast.rb: |
| * offlineasm/instructions.rb: |
| * offlineasm/risc.rb: |
| * runtime/PtrTag.h: Added. |
| (JSC::uniquePtrTagID): |
| (JSC::ptrTag): |
| (JSC::tagCodePtr): |
| (JSC::untagCodePtr): |
| (JSC::retagCodePtr): |
| (JSC::removeCodePtrTag): |
| |
| 2018-03-09 Mark Lam <mark.lam@apple.com> |
| |
| Remove unused LLINT_STATS feature. |
| https://bugs.webkit.org/show_bug.cgi?id=183522 |
| <rdar://problem/38313139> |
| |
| Rubber-stamped by Keith Miller. |
| |
| We haven't used this in a while, and it is one more option that makes offlineasm |
| build slower. We can always re-introduce this later if we need it. |
| |
| * jsc.cpp: |
| * llint/LLIntCommon.h: |
| * llint/LLIntData.cpp: |
| (JSC::LLInt::initialize): |
| (JSC::LLInt::Data::finalizeStats): Deleted. |
| (JSC::LLInt::compareStats): Deleted. |
| (JSC::LLInt::Data::dumpStats): Deleted. |
| (JSC::LLInt::Data::ensureStats): Deleted. |
| (JSC::LLInt::Data::loadStats): Deleted. |
| (JSC::LLInt::Data::resetStats): Deleted. |
| (JSC::LLInt::Data::saveStats): Deleted. |
| * llint/LLIntData.h: |
| (): Deleted. |
| (JSC::LLInt::Data::opcodeStats): Deleted. |
| * llint/LLIntOfflineAsmConfig.h: |
| * llint/LLIntSlowPaths.cpp: |
| * llint/LLIntSlowPaths.h: |
| * llint/LowLevelInterpreter.asm: |
| * llint/LowLevelInterpreter32_64.asm: |
| * llint/LowLevelInterpreter64.asm: |
| * runtime/Options.cpp: |
| (JSC::Options::isAvailable): |
| (JSC::recomputeDependentOptions): |
| * runtime/Options.h: |
| * runtime/TestRunnerUtils.cpp: |
| (JSC::finalizeStatsAtEndOfTesting): |
| |
| 2018-03-09 Michael Saboff <msaboff@apple.com> |
| |
| Relanding "testmasm crashes in testBranchTruncateDoubleToInt32() on ARM64" |
| https://bugs.webkit.org/show_bug.cgi?id=183488 |
| |
| It applied and built just fine locally. |
| |
| * assembler/testmasm.cpp: |
| (JSC::testBranchTruncateDoubleToInt32): |
| |
| 2018-03-09 Yusuke Suzuki <utatane.tea@gmail.com> |
| |
| Unreviewed, remove WebAssemblyFunctionType |
| https://bugs.webkit.org/show_bug.cgi?id=183429 |
| |
| Drop WebAssemblyFunctionType since it is no longer used. This breaks |
| JSCast assumption that all the derived classes of JSFunction use |
| JSFunctionType. We also add ASSERT for JSFunction::finishCreation. |
| |
| * runtime/JSFunction.cpp: |
| (JSC::JSFunction::finishCreation): |
| * runtime/JSType.h: |
| * wasm/js/WebAssemblyFunction.cpp: |
| (JSC::WebAssemblyFunction::createStructure): |
| * wasm/js/WebAssemblyFunction.h: |
| |
| 2018-03-09 Ryan Haddad <ryanhaddad@apple.com> |
| |
| Unreviewed, rolling out r229446. |
| |
| This change relies on changes that have been rolled out. |
| |
| Reverted changeset: |
| |
| "testmasm crashes in testBranchTruncateDoubleToInt32() on |
| ARM64" |
| https://bugs.webkit.org/show_bug.cgi?id=183488 |
| https://trac.webkit.org/changeset/229446 |
| |
| 2018-03-08 Chris Dumez <cdumez@apple.com> |
| |
| Safari not handling undefined global variables with same name as element Id correctly. |
| https://bugs.webkit.org/show_bug.cgi?id=183087 |
| <rdar://problem/37927596> |
| |
| Reviewed by Ryosuke Niwa. |
| |
| global variables (var foo;) should not be hidden by: |
| - Named properties |
| - Properties on the prototype chain |
| |
| Therefore, we now have JSGlobalObject::addVar() call JSGlobalObject::addGlobalVar() |
| if !hasOwnProperty() instead of !hasProperty. |
| |
| This aligns our behavior with Chrome and Firefox. |
| |
| * runtime/JSGlobalObject.h: |
| (JSC::JSGlobalObject::addVar): |
| |
| 2018-03-08 Commit Queue <commit-queue@webkit.org> |
| |
| Unreviewed, rolling out r229354 and r229364. |
| https://bugs.webkit.org/show_bug.cgi?id=183492 |
| |
| Breaks internal builds (Requested by ryanhaddad on #webkit). |
| |
| Reverted changesets: |
| |
| "Prepare LLInt code to support pointer profiling." |
| https://bugs.webkit.org/show_bug.cgi?id=183387 |
| https://trac.webkit.org/changeset/229354 |
| |
| "Add support for ARM64E." |
| https://bugs.webkit.org/show_bug.cgi?id=183398 |
| https://trac.webkit.org/changeset/229364 |
| |
| 2018-03-08 Michael Saboff <msaboff@apple.com> |
| |
| testmasm crashes in testBranchTruncateDoubleToInt32() on ARM64 |
| https://bugs.webkit.org/show_bug.cgi?id=183488 |
| |
| Reviewed by Mark Lam. |
| |
| Using stackAlignmentBytes() will keep the stack properly aligned. |
| |
| * assembler/testmasm.cpp: |
| (JSC::testBranchTruncateDoubleToInt32): |
| |
| 2018-03-08 Michael Saboff <msaboff@apple.com> |
| |
| Emit code to zero the stack frame on function entry |
| Nhttps://bugs.webkit.org/show_bug.cgi?id=183391 |
| |
| Reviewed by Mark Lam. |
| |
| Added code to zero incoming stack frame behind a new JSC option, zeroStackFrame. |
| The default setting of the option is off. |
| |
| Did some minor refactoring of the YarrJIT stack alignment code. |
| |
| * b3/air/AirCode.cpp: |
| (JSC::B3::Air::defaultPrologueGenerator): |
| * dfg/DFGJITCompiler.cpp: |
| (JSC::DFG::JITCompiler::compile): |
| (JSC::DFG::JITCompiler::compileFunction): |
| * dfg/DFGSpeculativeJIT.cpp: |
| (JSC::DFG::SpeculativeJIT::compileCurrentBlock): |
| * dfg/DFGThunks.cpp: |
| (JSC::DFG::osrEntryThunkGenerator): |
| * ftl/FTLLowerDFGToB3.cpp: |
| (JSC::FTL::DFG::LowerDFGToB3::lower): |
| * jit/AssemblyHelpers.h: |
| (JSC::AssemblyHelpers::clearStackFrame): |
| * jit/JIT.cpp: |
| (JSC::JIT::compileWithoutLinking): |
| * llint/LowLevelInterpreter.asm: |
| * runtime/Options.h: |
| * yarr/YarrJIT.cpp: |
| (JSC::Yarr::YarrGenerator::ialignCallFrameSizeInBytesnitCallFrame): |
| (JSC::Yarr::YarrGenerator::initCallFrame): |
| (JSC::Yarr::YarrGenerator::removeCallFrame): |
| |
| 2018-03-08 Keith Miller <keith_miller@apple.com> |
| |
| Unreviewed, another attempt at fixing the Windows build. |
| I guess the pragma must be outside the function... |
| |
| * jit/CCallHelpers.h: |
| (JSC::CCallHelpers::clampArrayToSize): |
| |
| 2018-03-08 Keith Miller <keith_miller@apple.com> |
| |
| Unreviewed, one last try at fixing the windows build before rollout. |
| |
| * jit/CCallHelpers.h: |
| (JSC::CCallHelpers::clampArrayToSize): |
| |
| 2018-03-08 Yusuke Suzuki <utatane.tea@gmail.com> |
| |
| [JSC] Optimize inherits<T> if T is final type |
| https://bugs.webkit.org/show_bug.cgi?id=183435 |
| |
| Reviewed by Mark Lam. |
| |
| If the type T is a final type (`std::is_final<T>::value == true`), there is no |
| classes which is derived from T. It means that `jsDynamicCast<T>` only needs |
| to check the given cell's `classInfo(vm)` is `T::info()`. |
| |
| This patch adds a new specialization for jsDynamicCast<T> / inherits<T> for a |
| final type. And we also add `final` annotations to JS cell types in JSC. This |
| offers, |
| |
| 1. Readability. If the given class is annotated with `final`, we do not need to |
| consider about the derived classes of T. |
| |
| 2. Static Checking. If your class is not intended to be used as a base class, attaching |
| `final` can ensure this invariant. |
| |
| 3. Performance. jsDynamicCast<T> and inherits<T> can be optimized and the code size should |
| be smaller. |
| |
| * API/JSCallbackConstructor.h: |
| (JSC::JSCallbackConstructor::create): Deleted. |
| (JSC::JSCallbackConstructor::classRef const): Deleted. |
| (JSC::JSCallbackConstructor::callback const): Deleted. |
| (JSC::JSCallbackConstructor::createStructure): Deleted. |
| (JSC::JSCallbackConstructor::constructCallback): Deleted. |
| * API/JSCallbackFunction.h: |
| (JSC::JSCallbackFunction::createStructure): Deleted. |
| (JSC::JSCallbackFunction::functionCallback): Deleted. |
| * API/JSCallbackObject.h: |
| (JSC::JSCallbackObject::create): Deleted. |
| (JSC::JSCallbackObject::destroy): Deleted. |
| (JSC::JSCallbackObject::classRef const): Deleted. |
| (JSC::JSCallbackObject::getPrivateProperty const): Deleted. |
| (JSC::JSCallbackObject::setPrivateProperty): Deleted. |
| (JSC::JSCallbackObject::deletePrivateProperty): Deleted. |
| (JSC::JSCallbackObject::visitChildren): Deleted. |
| * bytecode/CodeBlock.cpp: |
| (JSC::CodeBlock::setConstantRegisters): |
| * bytecode/ExecutableToCodeBlockEdge.h: |
| (JSC::ExecutableToCodeBlockEdge::subspaceFor): Deleted. |
| (JSC::ExecutableToCodeBlockEdge::codeBlock const): Deleted. |
| (JSC::ExecutableToCodeBlockEdge::unwrap): Deleted. |
| * bytecode/FunctionCodeBlock.h: |
| (JSC::FunctionCodeBlock::subspaceFor): Deleted. |
| (JSC::FunctionCodeBlock::create): Deleted. |
| (JSC::FunctionCodeBlock::createStructure): Deleted. |
| (JSC::FunctionCodeBlock::FunctionCodeBlock): Deleted. |
| * debugger/DebuggerScope.h: |
| (JSC::DebuggerScope::createStructure): Deleted. |
| (JSC::DebuggerScope::iterator::iterator): Deleted. |
| (JSC::DebuggerScope::iterator::get): Deleted. |
| (JSC::DebuggerScope::iterator::operator++): Deleted. |
| (JSC::DebuggerScope::iterator::operator== const): Deleted. |
| (JSC::DebuggerScope::iterator::operator!= const): Deleted. |
| (JSC::DebuggerScope::isValid const): Deleted. |
| (JSC::DebuggerScope::jsScope const): Deleted. |
| * inspector/JSInjectedScriptHost.h: |
| (Inspector::JSInjectedScriptHost::createStructure): Deleted. |
| (Inspector::JSInjectedScriptHost::create): Deleted. |
| (Inspector::JSInjectedScriptHost::impl const): Deleted. |
| * inspector/JSInjectedScriptHostPrototype.h: |
| (Inspector::JSInjectedScriptHostPrototype::create): Deleted. |
| (Inspector::JSInjectedScriptHostPrototype::createStructure): Deleted. |
| (Inspector::JSInjectedScriptHostPrototype::JSInjectedScriptHostPrototype): Deleted. |
| * inspector/JSJavaScriptCallFrame.h: |
| (Inspector::JSJavaScriptCallFrame::createStructure): Deleted. |
| (Inspector::JSJavaScriptCallFrame::create): Deleted. |
| (Inspector::JSJavaScriptCallFrame::impl const): Deleted. |
| * inspector/JSJavaScriptCallFramePrototype.h: |
| (Inspector::JSJavaScriptCallFramePrototype::create): Deleted. |
| (Inspector::JSJavaScriptCallFramePrototype::createStructure): Deleted. |
| (Inspector::JSJavaScriptCallFramePrototype::JSJavaScriptCallFramePrototype): Deleted. |
| * jit/Repatch.cpp: |
| (JSC::tryCacheGetByID): |
| * runtime/ArrayConstructor.h: |
| (JSC::ArrayConstructor::create): Deleted. |
| (JSC::ArrayConstructor::createStructure): Deleted. |
| * runtime/ArrayIteratorPrototype.h: |
| (JSC::ArrayIteratorPrototype::create): Deleted. |
| (JSC::ArrayIteratorPrototype::createStructure): Deleted. |
| (JSC::ArrayIteratorPrototype::ArrayIteratorPrototype): Deleted. |
| * runtime/ArrayPrototype.h: |
| (JSC::ArrayPrototype::createStructure): Deleted. |
| * runtime/AsyncFromSyncIteratorPrototype.h: |
| (JSC::AsyncFromSyncIteratorPrototype::createStructure): Deleted. |
| * runtime/AsyncFunctionConstructor.h: |
| (JSC::AsyncFunctionConstructor::create): Deleted. |
| (JSC::AsyncFunctionConstructor::createStructure): Deleted. |
| * runtime/AsyncFunctionPrototype.h: |
| (JSC::AsyncFunctionPrototype::create): Deleted. |
| (JSC::AsyncFunctionPrototype::createStructure): Deleted. |
| * runtime/AsyncGeneratorFunctionConstructor.h: |
| (JSC::AsyncGeneratorFunctionConstructor::create): Deleted. |
| (JSC::AsyncGeneratorFunctionConstructor::createStructure): Deleted. |
| * runtime/AsyncGeneratorFunctionPrototype.h: |
| (JSC::AsyncGeneratorFunctionPrototype::create): Deleted. |
| (JSC::AsyncGeneratorFunctionPrototype::createStructure): Deleted. |
| * runtime/AsyncGeneratorPrototype.h: |
| (JSC::AsyncGeneratorPrototype::create): Deleted. |
| (JSC::AsyncGeneratorPrototype::createStructure): Deleted. |
| (JSC::AsyncGeneratorPrototype::AsyncGeneratorPrototype): Deleted. |
| * runtime/AsyncIteratorPrototype.h: |
| (JSC::AsyncIteratorPrototype::create): Deleted. |
| (JSC::AsyncIteratorPrototype::createStructure): Deleted. |
| (JSC::AsyncIteratorPrototype::AsyncIteratorPrototype): Deleted. |
| * runtime/AtomicsObject.h: |
| * runtime/BigIntConstructor.h: |
| (JSC::BigIntConstructor::create): Deleted. |
| (JSC::BigIntConstructor::createStructure): Deleted. |
| * runtime/BigIntObject.h: |
| (JSC::BigIntObject::create): Deleted. |
| (JSC::BigIntObject::internalValue const): Deleted. |
| (JSC::BigIntObject::createStructure): Deleted. |
| * runtime/BigIntPrototype.h: |
| (JSC::BigIntPrototype::create): Deleted. |
| (JSC::BigIntPrototype::createStructure): Deleted. |
| * runtime/BooleanConstructor.h: |
| (JSC::BooleanConstructor::create): Deleted. |
| (JSC::BooleanConstructor::createStructure): Deleted. |
| * runtime/BooleanPrototype.h: |
| (JSC::BooleanPrototype::create): Deleted. |
| (JSC::BooleanPrototype::createStructure): Deleted. |
| * runtime/ConsoleObject.h: |
| (JSC::ConsoleObject::create): Deleted. |
| (JSC::ConsoleObject::createStructure): Deleted. |
| * runtime/DOMAttributeGetterSetter.h: |
| (JSC::isDOMAttributeGetterSetter): Deleted. |
| * runtime/DateConstructor.h: |
| (JSC::DateConstructor::create): Deleted. |
| (JSC::DateConstructor::createStructure): Deleted. |
| * runtime/DateInstance.h: |
| (JSC::DateInstance::create): Deleted. |
| (JSC::DateInstance::internalNumber const): Deleted. |
| (JSC::DateInstance::gregorianDateTime const): Deleted. |
| (JSC::DateInstance::gregorianDateTimeUTC const): Deleted. |
| (JSC::DateInstance::createStructure): Deleted. |
| * runtime/DatePrototype.h: |
| (JSC::DatePrototype::create): Deleted. |
| (JSC::DatePrototype::createStructure): Deleted. |
| * runtime/Error.h: |
| (JSC::StrictModeTypeErrorFunction::StrictModeTypeErrorFunction): Deleted. |
| (JSC::StrictModeTypeErrorFunction::create): Deleted. |
| (JSC::StrictModeTypeErrorFunction::constructThrowTypeError): Deleted. |
| (JSC::StrictModeTypeErrorFunction::callThrowTypeError): Deleted. |
| (JSC::StrictModeTypeErrorFunction::createStructure): Deleted. |
| * runtime/ErrorConstructor.h: |
| (JSC::ErrorConstructor::create): Deleted. |
| (JSC::ErrorConstructor::createStructure): Deleted. |
| (JSC::ErrorConstructor::stackTraceLimit const): Deleted. |
| * runtime/Exception.h: |
| (JSC::Exception::valueOffset): Deleted. |
| (JSC::Exception::value const): Deleted. |
| (JSC::Exception::stack const): Deleted. |
| (JSC::Exception::didNotifyInspectorOfThrow const): Deleted. |
| (JSC::Exception::setDidNotifyInspectorOfThrow): Deleted. |
| * runtime/FunctionConstructor.h: |
| (JSC::FunctionConstructor::create): Deleted. |
| (JSC::FunctionConstructor::createStructure): Deleted. |
| * runtime/FunctionPrototype.h: |
| (JSC::FunctionPrototype::create): Deleted. |
| (JSC::FunctionPrototype::createStructure): Deleted. |
| * runtime/FunctionRareData.h: |
| (JSC::FunctionRareData::offsetOfObjectAllocationProfile): Deleted. |
| (JSC::FunctionRareData::objectAllocationProfile): Deleted. |
| (JSC::FunctionRareData::objectAllocationStructure): Deleted. |
| (JSC::FunctionRareData::allocationProfileWatchpointSet): Deleted. |
| (JSC::FunctionRareData::isObjectAllocationProfileInitialized): Deleted. |
| (JSC::FunctionRareData::internalFunctionAllocationStructure): Deleted. |
| (JSC::FunctionRareData::createInternalFunctionAllocationStructureFromBase): Deleted. |
| (JSC::FunctionRareData::clearInternalFunctionAllocationProfile): Deleted. |
| (JSC::FunctionRareData::getBoundFunctionStructure): Deleted. |
| (JSC::FunctionRareData::setBoundFunctionStructure): Deleted. |
| (JSC::FunctionRareData::hasReifiedLength const): Deleted. |
| (JSC::FunctionRareData::setHasReifiedLength): Deleted. |
| (JSC::FunctionRareData::hasReifiedName const): Deleted. |
| (JSC::FunctionRareData::setHasReifiedName): Deleted. |
| (JSC::FunctionRareData::hasAllocationProfileClearingWatchpoint const): Deleted. |
| (JSC::FunctionRareData::createAllocationProfileClearingWatchpoint): Deleted. |
| (JSC::FunctionRareData::AllocationProfileClearingWatchpoint::AllocationProfileClearingWatchpoint): Deleted. |
| * runtime/GeneratorFunctionConstructor.h: |
| (JSC::GeneratorFunctionConstructor::create): Deleted. |
| (JSC::GeneratorFunctionConstructor::createStructure): Deleted. |
| * runtime/GeneratorFunctionPrototype.h: |
| (JSC::GeneratorFunctionPrototype::create): Deleted. |
| (JSC::GeneratorFunctionPrototype::createStructure): Deleted. |
| * runtime/GeneratorPrototype.h: |
| (JSC::GeneratorPrototype::create): Deleted. |
| (JSC::GeneratorPrototype::createStructure): Deleted. |
| (JSC::GeneratorPrototype::GeneratorPrototype): Deleted. |
| * runtime/InferredValue.h: |
| (JSC::InferredValue::subspaceFor): Deleted. |
| (JSC::InferredValue::inferredValue): Deleted. |
| (JSC::InferredValue::state const): Deleted. |
| (JSC::InferredValue::isStillValid const): Deleted. |
| (JSC::InferredValue::hasBeenInvalidated const): Deleted. |
| (JSC::InferredValue::add): Deleted. |
| (JSC::InferredValue::notifyWrite): Deleted. |
| (JSC::InferredValue::invalidate): Deleted. |
| * runtime/InspectorInstrumentationObject.h: |
| (JSC::InspectorInstrumentationObject::create): Deleted. |
| (JSC::InspectorInstrumentationObject::createStructure): Deleted. |
| * runtime/IntlCollator.h: |
| (JSC::IntlCollator::boundCompare const): Deleted. |
| * runtime/IntlCollatorConstructor.h: |
| (JSC::IntlCollatorConstructor::collatorStructure const): Deleted. |
| * runtime/IntlCollatorPrototype.h: |
| * runtime/IntlDateTimeFormat.h: |
| (JSC::IntlDateTimeFormat::boundFormat const): Deleted. |
| * runtime/IntlDateTimeFormatConstructor.h: |
| (JSC::IntlDateTimeFormatConstructor::dateTimeFormatStructure const): Deleted. |
| * runtime/IntlDateTimeFormatPrototype.h: |
| * runtime/IntlNumberFormat.h: |
| (JSC::IntlNumberFormat::boundFormat const): Deleted. |
| * runtime/IntlNumberFormatConstructor.h: |
| (JSC::IntlNumberFormatConstructor::numberFormatStructure const): Deleted. |
| * runtime/IntlNumberFormatPrototype.h: |
| * runtime/IntlObject.h: |
| * runtime/IteratorPrototype.h: |
| (JSC::IteratorPrototype::create): Deleted. |
| (JSC::IteratorPrototype::createStructure): Deleted. |
| (JSC::IteratorPrototype::IteratorPrototype): Deleted. |
| * runtime/JSAPIValueWrapper.h: |
| (JSC::JSAPIValueWrapper::value const): Deleted. |
| (JSC::JSAPIValueWrapper::createStructure): Deleted. |
| (JSC::JSAPIValueWrapper::create): Deleted. |
| (JSC::JSAPIValueWrapper::finishCreation): Deleted. |
| (JSC::JSAPIValueWrapper::JSAPIValueWrapper): Deleted. |
| * runtime/JSArrayBufferConstructor.h: |
| (JSC::JSArrayBufferConstructor::sharingMode const): Deleted. |
| * runtime/JSArrayBufferPrototype.h: |
| * runtime/JSAsyncFunction.h: |
| (JSC::JSAsyncFunction::subspaceFor): Deleted. |
| (JSC::JSAsyncFunction::allocationSize): Deleted. |
| (JSC::JSAsyncFunction::createStructure): Deleted. |
| * runtime/JSAsyncGeneratorFunction.h: |
| (JSC::JSAsyncGeneratorFunction::subspaceFor): Deleted. |
| (JSC::JSAsyncGeneratorFunction::allocationSize): Deleted. |
| (JSC::JSAsyncGeneratorFunction::createStructure): Deleted. |
| * runtime/JSBigInt.h: |
| (JSC::JSBigInt::setSign): Deleted. |
| (JSC::JSBigInt::sign const): Deleted. |
| (JSC::JSBigInt::setLength): Deleted. |
| (JSC::JSBigInt::length const): Deleted. |
| * runtime/JSBoundFunction.h: |
| (JSC::JSBoundFunction::subspaceFor): Deleted. |
| (JSC::JSBoundFunction::targetFunction): Deleted. |
| (JSC::JSBoundFunction::boundThis): Deleted. |
| (JSC::JSBoundFunction::boundArgs): Deleted. |
| (JSC::JSBoundFunction::createStructure): Deleted. |
| (JSC::JSBoundFunction::offsetOfTargetFunction): Deleted. |
| (JSC::JSBoundFunction::offsetOfBoundThis): Deleted. |
| * runtime/JSCast.h: |
| (JSC::JSCastingHelpers::FinalTypeDispatcher::inheritsGeneric): |
| (JSC::JSCastingHelpers::inheritsJSTypeImpl): |
| (JSC::JSCastingHelpers::InheritsTraits::inherits): |
| (JSC::JSCastingHelpers::inheritsGenericImpl): Deleted. |
| * runtime/JSCustomGetterSetterFunction.cpp: |
| (JSC::JSCustomGetterSetterFunction::customGetterSetterFunctionCall): |
| * runtime/JSCustomGetterSetterFunction.h: |
| (JSC::JSCustomGetterSetterFunction::subspaceFor): Deleted. |
| (JSC::JSCustomGetterSetterFunction::createStructure): Deleted. |
| (JSC::JSCustomGetterSetterFunction::customGetterSetter const): Deleted. |
| (JSC::JSCustomGetterSetterFunction::isSetter const): Deleted. |
| (JSC::JSCustomGetterSetterFunction::propertyName const): Deleted. |
| * runtime/JSDataView.h: |
| (JSC::JSDataView::possiblySharedBuffer const): Deleted. |
| (JSC::JSDataView::unsharedBuffer const): Deleted. |
| * runtime/JSDataViewPrototype.h: |
| * runtime/JSFixedArray.h: |
| (JSC::JSFixedArray::createStructure): Deleted. |
| (JSC::JSFixedArray::tryCreate): Deleted. |
| (JSC::JSFixedArray::create): Deleted. |
| (JSC::JSFixedArray::createFromArray): Deleted. |
| (JSC::JSFixedArray::get const): Deleted. |
| (JSC::JSFixedArray::set): Deleted. |
| (JSC::JSFixedArray::buffer): Deleted. |
| (JSC::JSFixedArray::buffer const): Deleted. |
| (JSC::JSFixedArray::values const): Deleted. |
| (JSC::JSFixedArray::size const): Deleted. |
| (JSC::JSFixedArray::length const): Deleted. |
| (JSC::JSFixedArray::offsetOfSize): Deleted. |
| (JSC::JSFixedArray::offsetOfData): Deleted. |
| (JSC::JSFixedArray::JSFixedArray): Deleted. |
| (JSC::JSFixedArray::allocationSize): Deleted. |
| * runtime/JSGeneratorFunction.h: |
| (JSC::JSGeneratorFunction::subspaceFor): Deleted. |
| (JSC::JSGeneratorFunction::allocationSize): Deleted. |
| (JSC::JSGeneratorFunction::createStructure): Deleted. |
| * runtime/JSGenericTypedArrayView.h: |
| (JSC::JSGenericTypedArrayView::byteLength const): Deleted. |
| (JSC::JSGenericTypedArrayView::byteSize const): Deleted. |
| (JSC::JSGenericTypedArrayView::typedVector const): Deleted. |
| (JSC::JSGenericTypedArrayView::typedVector): Deleted. |
| (JSC::JSGenericTypedArrayView::canGetIndexQuickly): Deleted. |
| (JSC::JSGenericTypedArrayView::canSetIndexQuickly): Deleted. |
| (JSC::JSGenericTypedArrayView::getIndexQuicklyAsNativeValue): Deleted. |
| (JSC::JSGenericTypedArrayView::getIndexQuicklyAsDouble): Deleted. |
| (JSC::JSGenericTypedArrayView::getIndexQuickly): Deleted. |
| (JSC::JSGenericTypedArrayView::setIndexQuicklyToNativeValue): Deleted. |
| (JSC::JSGenericTypedArrayView::setIndexQuicklyToDouble): Deleted. |
| (JSC::JSGenericTypedArrayView::setIndexQuickly): Deleted. |
| (JSC::JSGenericTypedArrayView::setIndex): Deleted. |
| (JSC::JSGenericTypedArrayView::toAdaptorNativeFromValue): Deleted. |
| (JSC::JSGenericTypedArrayView::toAdaptorNativeFromValueWithoutCoercion): Deleted. |
| (JSC::JSGenericTypedArrayView::sort): Deleted. |
| (JSC::JSGenericTypedArrayView::canAccessRangeQuickly): Deleted. |
| (JSC::JSGenericTypedArrayView::createStructure): Deleted. |
| (JSC::JSGenericTypedArrayView::info): Deleted. |
| (JSC::JSGenericTypedArrayView::purifyArray): Deleted. |
| (JSC::JSGenericTypedArrayView::sortComparison): Deleted. |
| (JSC::JSGenericTypedArrayView::sortFloat): Deleted. |
| * runtime/JSGenericTypedArrayViewConstructor.h: |
| * runtime/JSGenericTypedArrayViewPrototype.h: |
| * runtime/JSInternalPromise.h: |
| * runtime/JSInternalPromiseConstructor.h: |
| * runtime/JSInternalPromisePrototype.h: |
| * runtime/JSMapIterator.h: |
| (JSC::JSMapIterator::createStructure): Deleted. |
| (JSC::JSMapIterator::create): Deleted. |
| (JSC::JSMapIterator::advanceIter): Deleted. |
| (JSC::JSMapIterator::next): Deleted. |
| (JSC::JSMapIterator::nextKeyValue): Deleted. |
| (JSC::JSMapIterator::kind const): Deleted. |
| (JSC::JSMapIterator::iteratedValue const): Deleted. |
| (JSC::JSMapIterator::JSMapIterator): Deleted. |
| (JSC::JSMapIterator::setIterator): Deleted. |
| * runtime/JSModuleLoader.h: |
| (JSC::JSModuleLoader::create): Deleted. |
| (JSC::JSModuleLoader::createStructure): Deleted. |
| * runtime/JSModuleNamespaceObject.h: |
| (JSC::isJSModuleNamespaceObject): Deleted. |
| * runtime/JSModuleRecord.h: |
| (JSC::JSModuleRecord::sourceCode const): Deleted. |
| (JSC::JSModuleRecord::declaredVariables const): Deleted. |
| (JSC::JSModuleRecord::lexicalVariables const): Deleted. |
| * runtime/JSNativeStdFunction.h: |
| (JSC::JSNativeStdFunction::subspaceFor): Deleted. |
| (JSC::JSNativeStdFunction::createStructure): Deleted. |
| (JSC::JSNativeStdFunction::nativeStdFunctionCell): Deleted. |
| * runtime/JSONObject.h: |
| (JSC::JSONObject::create): Deleted. |
| (JSC::JSONObject::createStructure): Deleted. |
| * runtime/JSObject.h: |
| (JSC::JSObject::fillCustomGetterPropertySlot): |
| * runtime/JSScriptFetchParameters.h: |
| (JSC::JSScriptFetchParameters::createStructure): Deleted. |
| (JSC::JSScriptFetchParameters::create): Deleted. |
| (JSC::JSScriptFetchParameters::parameters const): Deleted. |
| (JSC::JSScriptFetchParameters::JSScriptFetchParameters): Deleted. |
| * runtime/JSScriptFetcher.h: |
| (JSC::JSScriptFetcher::createStructure): Deleted. |
| (JSC::JSScriptFetcher::create): Deleted. |
| (JSC::JSScriptFetcher::fetcher const): Deleted. |
| (JSC::JSScriptFetcher::JSScriptFetcher): Deleted. |
| * runtime/JSSetIterator.h: |
| (JSC::JSSetIterator::createStructure): Deleted. |
| (JSC::JSSetIterator::create): Deleted. |
| (JSC::JSSetIterator::advanceIter): Deleted. |
| (JSC::JSSetIterator::next): Deleted. |
| (JSC::JSSetIterator::kind const): Deleted. |
| (JSC::JSSetIterator::iteratedValue const): Deleted. |
| (JSC::JSSetIterator::JSSetIterator): Deleted. |
| (JSC::JSSetIterator::setIterator): Deleted. |
| * runtime/JSSourceCode.h: |
| (JSC::JSSourceCode::createStructure): Deleted. |
| (JSC::JSSourceCode::create): Deleted. |
| (JSC::JSSourceCode::sourceCode const): Deleted. |
| (JSC::JSSourceCode::JSSourceCode): Deleted. |
| * runtime/JSStringIterator.h: |
| (JSC::JSStringIterator::createStructure): Deleted. |
| (JSC::JSStringIterator::create): Deleted. |
| (JSC::JSStringIterator::JSStringIterator): Deleted. |
| * runtime/JSTemplateObjectDescriptor.h: |
| (JSC::isTemplateObjectDescriptor): Deleted. |
| * runtime/JSTypedArrayViewConstructor.h: |
| (JSC::JSTypedArrayViewConstructor::create): Deleted. |
| * runtime/JSTypedArrayViewPrototype.h: |
| * runtime/MapConstructor.h: |
| (JSC::MapConstructor::create): Deleted. |
| (JSC::MapConstructor::createStructure): Deleted. |
| * runtime/MapIteratorPrototype.h: |
| (JSC::MapIteratorPrototype::create): Deleted. |
| (JSC::MapIteratorPrototype::createStructure): Deleted. |
| (JSC::MapIteratorPrototype::MapIteratorPrototype): Deleted. |
| * runtime/MapPrototype.h: |
| (JSC::MapPrototype::create): Deleted. |
| (JSC::MapPrototype::createStructure): Deleted. |
| (JSC::MapPrototype::MapPrototype): Deleted. |
| * runtime/MathObject.h: |
| (JSC::MathObject::create): Deleted. |
| (JSC::MathObject::createStructure): Deleted. |
| * runtime/ModuleLoaderPrototype.h: |
| (JSC::ModuleLoaderPrototype::create): Deleted. |
| (JSC::ModuleLoaderPrototype::createStructure): Deleted. |
| * runtime/NativeErrorConstructor.h: |
| (JSC::NativeErrorConstructor::create): Deleted. |
| (JSC::NativeErrorConstructor::createStructure): Deleted. |
| (JSC::NativeErrorConstructor::errorStructure): Deleted. |
| * runtime/NativeErrorPrototype.h: |
| (JSC::NativeErrorPrototype::create): Deleted. |
| * runtime/NativeStdFunctionCell.h: |
| (JSC::NativeStdFunctionCell::createStructure): Deleted. |
| (JSC::NativeStdFunctionCell::function const): Deleted. |
| * runtime/NullGetterFunction.h: |
| (JSC::NullGetterFunction::create): Deleted. |
| (JSC::NullGetterFunction::createStructure): Deleted. |
| * runtime/NullSetterFunction.h: |
| (JSC::NullSetterFunction::create): Deleted. |
| (JSC::NullSetterFunction::createStructure): Deleted. |
| * runtime/NumberConstructor.h: |
| (JSC::NumberConstructor::create): Deleted. |
| (JSC::NumberConstructor::createStructure): Deleted. |
| (JSC::NumberConstructor::isIntegerImpl): Deleted. |
| * runtime/NumberPrototype.h: |
| (JSC::NumberPrototype::create): Deleted. |
| (JSC::NumberPrototype::createStructure): Deleted. |
| * runtime/ObjectConstructor.h: |
| (JSC::ObjectConstructor::create): Deleted. |
| (JSC::ObjectConstructor::createStructure): Deleted. |
| * runtime/ObjectPrototype.h: |
| (JSC::ObjectPrototype::createStructure): Deleted. |
| * runtime/ProxyConstructor.h: |
| (JSC::ProxyConstructor::createStructure): Deleted. |
| * runtime/ProxyRevoke.h: |
| (JSC::ProxyRevoke::createStructure): Deleted. |
| (JSC::ProxyRevoke::proxy): Deleted. |
| (JSC::ProxyRevoke::setProxyToNull): Deleted. |
| * runtime/ReflectObject.h: |
| (JSC::ReflectObject::create): Deleted. |
| (JSC::ReflectObject::createStructure): Deleted. |
| * runtime/RegExpConstructor.cpp: |
| (JSC::regExpConstructorDollar): |
| (JSC::regExpConstructorInput): |
| (JSC::regExpConstructorMultiline): |
| (JSC::regExpConstructorLastMatch): |
| (JSC::regExpConstructorLastParen): |
| (JSC::regExpConstructorLeftContext): |
| (JSC::regExpConstructorRightContext): |
| * runtime/RegExpConstructor.h: |
| (JSC::RegExpConstructor::create): Deleted. |
| (JSC::RegExpConstructor::createStructure): Deleted. |
| (JSC::RegExpConstructor::setMultiline): Deleted. |
| (JSC::RegExpConstructor::multiline const): Deleted. |
| (JSC::RegExpConstructor::setInput): Deleted. |
| (JSC::RegExpConstructor::input): Deleted. |
| (JSC::RegExpConstructor::offsetOfCachedResult): Deleted. |
| (JSC::asRegExpConstructor): Deleted. |
| * runtime/RegExpPrototype.h: |
| (JSC::RegExpPrototype::create): Deleted. |
| (JSC::RegExpPrototype::createStructure): Deleted. |
| (JSC::RegExpPrototype::emptyRegExp const): Deleted. |
| * runtime/SetConstructor.h: |
| (JSC::SetConstructor::create): Deleted. |
| (JSC::SetConstructor::createStructure): Deleted. |
| * runtime/SetIteratorPrototype.h: |
| (JSC::SetIteratorPrototype::create): Deleted. |
| (JSC::SetIteratorPrototype::createStructure): Deleted. |
| (JSC::SetIteratorPrototype::SetIteratorPrototype): Deleted. |
| * runtime/SetPrototype.h: |
| (JSC::SetPrototype::create): Deleted. |
| (JSC::SetPrototype::createStructure): Deleted. |
| (JSC::SetPrototype::SetPrototype): Deleted. |
| * runtime/StringConstructor.h: |
| (JSC::StringConstructor::create): Deleted. |
| (JSC::StringConstructor::createStructure): Deleted. |
| * runtime/StringIteratorPrototype.h: |
| (JSC::StringIteratorPrototype::create): Deleted. |
| (JSC::StringIteratorPrototype::createStructure): Deleted. |
| (JSC::StringIteratorPrototype::StringIteratorPrototype): Deleted. |
| * runtime/StringPrototype.h: |
| (JSC::StringPrototype::createStructure): Deleted. |
| * runtime/SymbolConstructor.h: |
| (JSC::SymbolConstructor::create): Deleted. |
| (JSC::SymbolConstructor::createStructure): Deleted. |
| * runtime/SymbolObject.h: |
| (JSC::SymbolObject::create): Deleted. |
| (JSC::SymbolObject::internalValue const): Deleted. |
| (JSC::SymbolObject::createStructure): Deleted. |
| * runtime/SymbolPrototype.h: |
| (JSC::SymbolPrototype::create): Deleted. |
| (JSC::SymbolPrototype::createStructure): Deleted. |
| * runtime/WeakMapConstructor.h: |
| (JSC::WeakMapConstructor::create): Deleted. |
| (JSC::WeakMapConstructor::createStructure): Deleted. |
| * runtime/WeakMapPrototype.h: |
| (JSC::WeakMapPrototype::create): Deleted. |
| (JSC::WeakMapPrototype::createStructure): Deleted. |
| (JSC::WeakMapPrototype::WeakMapPrototype): Deleted. |
| * runtime/WeakSetConstructor.h: |
| (JSC::WeakSetConstructor::create): Deleted. |
| (JSC::WeakSetConstructor::createStructure): Deleted. |
| * runtime/WeakSetPrototype.h: |
| (JSC::WeakSetPrototype::create): Deleted. |
| (JSC::WeakSetPrototype::createStructure): Deleted. |
| (JSC::WeakSetPrototype::WeakSetPrototype): Deleted. |
| * tools/JSDollarVM.h: |
| (JSC::JSDollarVM::createStructure): Deleted. |
| (JSC::JSDollarVM::create): Deleted. |
| (JSC::JSDollarVM::JSDollarVM): Deleted. |
| * wasm/js/JSWebAssembly.h: |
| * wasm/js/JSWebAssemblyCompileError.h: |
| (JSC::JSWebAssemblyCompileError::create): Deleted. |
| * wasm/js/JSWebAssemblyInstance.h: |
| (JSC::JSWebAssemblyInstance::instance): Deleted. |
| (JSC::JSWebAssemblyInstance::moduleNamespaceObject): Deleted. |
| (JSC::JSWebAssemblyInstance::webAssemblyToJSCallee): Deleted. |
| (JSC::JSWebAssemblyInstance::memory): Deleted. |
| (JSC::JSWebAssemblyInstance::setMemory): Deleted. |
| (JSC::JSWebAssemblyInstance::memoryMode): Deleted. |
| (JSC::JSWebAssemblyInstance::table): Deleted. |
| (JSC::JSWebAssemblyInstance::setTable): Deleted. |
| (JSC::JSWebAssemblyInstance::offsetOfPoisonedInstance): Deleted. |
| (JSC::JSWebAssemblyInstance::offsetOfPoisonedCallee): Deleted. |
| (JSC::JSWebAssemblyInstance::module const): Deleted. |
| * wasm/js/JSWebAssemblyLinkError.h: |
| (JSC::JSWebAssemblyLinkError::create): Deleted. |
| * wasm/js/JSWebAssemblyMemory.h: |
| (JSC::JSWebAssemblyMemory::subspaceFor): Deleted. |
| (JSC::JSWebAssemblyMemory::memory): Deleted. |
| * wasm/js/JSWebAssemblyModule.h: |
| * wasm/js/JSWebAssemblyRuntimeError.h: |
| (JSC::JSWebAssemblyRuntimeError::create): Deleted. |
| * wasm/js/JSWebAssemblyTable.h: |
| (JSC::JSWebAssemblyTable::isValidLength): Deleted. |
| (JSC::JSWebAssemblyTable::maximum const): Deleted. |
| (JSC::JSWebAssemblyTable::length const): Deleted. |
| (JSC::JSWebAssemblyTable::allocatedLength const): Deleted. |
| (JSC::JSWebAssemblyTable::table): Deleted. |
| * wasm/js/WebAssemblyCompileErrorConstructor.h: |
| * wasm/js/WebAssemblyCompileErrorPrototype.h: |
| * wasm/js/WebAssemblyInstanceConstructor.h: |
| * wasm/js/WebAssemblyInstancePrototype.h: |
| * wasm/js/WebAssemblyLinkErrorConstructor.h: |
| * wasm/js/WebAssemblyLinkErrorPrototype.h: |
| * wasm/js/WebAssemblyMemoryConstructor.h: |
| * wasm/js/WebAssemblyMemoryPrototype.h: |
| * wasm/js/WebAssemblyModuleConstructor.h: |
| * wasm/js/WebAssemblyModulePrototype.h: |
| * wasm/js/WebAssemblyModuleRecord.h: |
| * wasm/js/WebAssemblyPrototype.h: |
| * wasm/js/WebAssemblyRuntimeErrorConstructor.h: |
| * wasm/js/WebAssemblyRuntimeErrorPrototype.h: |
| * wasm/js/WebAssemblyTableConstructor.h: |
| * wasm/js/WebAssemblyTablePrototype.h: |
| |
| 2018-03-07 Filip Pizlo <fpizlo@apple.com> |
| |
| Make it possible to randomize register allocation |
| https://bugs.webkit.org/show_bug.cgi?id=183416 |
| |
| Reviewed by Keith Miller. |
| |
| This is disabled by default for now, because it reveals a regalloc bug in wasm. |
| |
| * b3/air/AirCode.cpp: |
| (JSC::B3::Air::Code::Code): |
| * b3/air/AirCode.h: |
| (JSC::B3::Air::Code::weakRandom): |
| * runtime/Options.h: |
| |
| 2018-03-08 Yusuke Suzuki <utatane.tea@gmail.com> |
| |
| [JSC] Add inherits<T>(VM&) leveraging JSCast fast path |
| https://bugs.webkit.org/show_bug.cgi?id=183429 |
| |
| Reviewed by Mark Lam. |
| |
| Add new member function, JSCell::inherits<T>(VM&) and JSValue::inherits<T>(VM&). |
| They depends on jsDynamicCast<T> implementation and leverage JSType-based fast |
| paths defined in JSCast.h. We extract checking part as `JSCastingHelpers::inherit` |
| and construct jsDynamicCast and JSCell::inherits based on this. |
| |
| And we remove several unnecessary casting functions (asRegExpObject, asDateInstance etc.). |
| In addition, we add jsDynamicCast fast path for RegExpObject by using existing RegExpObjectType. |
| |
| We also fix the implementation of jsDynamicCast for JSObject since it uses LastJSCObjectType. |
| The embedder can add their extended object types after that. |
| |
| * API/JSObjectRef.cpp: |
| (JSObjectGetPrivateProperty): |
| (JSObjectSetPrivateProperty): |
| (JSObjectDeletePrivateProperty): |
| * API/JSValue.mm: |
| (isDate): |
| (isArray): |
| * API/JSValueRef.cpp: |
| (JSValueIsArray): |
| (JSValueIsDate): |
| (JSValueIsObjectOfClass): |
| * API/JSWeakObjectMapRefPrivate.cpp: |
| * API/JSWrapperMap.mm: |
| (tryUnwrapObjcObject): |
| * API/ObjCCallbackFunction.mm: |
| (tryUnwrapConstructor): |
| * dfg/DFGByteCodeParser.cpp: |
| (JSC::DFG::ByteCodeParser::parseBlock): |
| * dfg/DFGOperations.cpp: |
| * ftl/FTLLowerDFGToB3.cpp: |
| (JSC::FTL::DFG::LowerDFGToB3::compileOverridesHasInstance): |
| (JSC::FTL::DFG::LowerDFGToB3::compileNewRegexp): |
| * ftl/FTLOperations.cpp: |
| (JSC::FTL::operationMaterializeObjectInOSR): |
| * inspector/JSInjectedScriptHost.cpp: |
| (Inspector::JSInjectedScriptHost::subtype): |
| (Inspector::JSInjectedScriptHost::functionDetails): |
| * inspector/agents/InspectorHeapAgent.cpp: |
| (Inspector::InspectorHeapAgent::getPreview): |
| * interpreter/Interpreter.cpp: |
| (JSC::notifyDebuggerOfUnwinding): |
| * interpreter/ShadowChicken.cpp: |
| (JSC::ShadowChicken::update): |
| * jit/JIT.cpp: |
| (JSC::JIT::privateCompileMainPass): |
| * jit/JITOperations.cpp: |
| (JSC::operationNewFunctionCommon): |
| * jsc.cpp: |
| (checkException): |
| * runtime/BooleanObject.h: |
| (JSC::asBooleanObject): Deleted. |
| * runtime/BooleanPrototype.cpp: |
| (JSC::booleanProtoFuncToString): |
| (JSC::booleanProtoFuncValueOf): |
| * runtime/DateConstructor.cpp: |
| (JSC::constructDate): |
| * runtime/DateInstance.h: |
| (JSC::asDateInstance): Deleted. |
| * runtime/DatePrototype.cpp: |
| (JSC::formateDateInstance): |
| (JSC::dateProtoFuncToISOString): |
| (JSC::dateProtoFuncToLocaleString): |
| (JSC::dateProtoFuncToLocaleDateString): |
| (JSC::dateProtoFuncToLocaleTimeString): |
| (JSC::dateProtoFuncGetTime): |
| (JSC::dateProtoFuncGetFullYear): |
| (JSC::dateProtoFuncGetUTCFullYear): |
| (JSC::dateProtoFuncGetMonth): |
| (JSC::dateProtoFuncGetUTCMonth): |
| (JSC::dateProtoFuncGetDate): |
| (JSC::dateProtoFuncGetUTCDate): |
| (JSC::dateProtoFuncGetDay): |
| (JSC::dateProtoFuncGetUTCDay): |
| (JSC::dateProtoFuncGetHours): |
| (JSC::dateProtoFuncGetUTCHours): |
| (JSC::dateProtoFuncGetMinutes): |
| (JSC::dateProtoFuncGetUTCMinutes): |
| (JSC::dateProtoFuncGetSeconds): |
| (JSC::dateProtoFuncGetUTCSeconds): |
| (JSC::dateProtoFuncGetMilliSeconds): |
| (JSC::dateProtoFuncGetUTCMilliseconds): |
| (JSC::dateProtoFuncGetTimezoneOffset): |
| (JSC::dateProtoFuncSetTime): |
| (JSC::setNewValueFromTimeArgs): |
| (JSC::setNewValueFromDateArgs): |
| (JSC::dateProtoFuncSetYear): |
| (JSC::dateProtoFuncGetYear): |
| * runtime/ExceptionHelpers.cpp: |
| (JSC::isTerminatedExecutionException): |
| * runtime/FunctionPrototype.cpp: |
| (JSC::functionProtoFuncToString): |
| * runtime/InternalFunction.h: |
| (JSC::asInternalFunction): |
| * runtime/JSArray.h: |
| (JSC::asArray): |
| * runtime/JSCJSValue.cpp: |
| (JSC::JSValue::dumpForBacktrace const): |
| * runtime/JSCJSValue.h: |
| * runtime/JSCJSValueInlines.h: |
| (JSC::JSValue::inherits const): |
| * runtime/JSCast.h: |
| (JSC::JSCastingHelpers::inheritsGenericImpl): |
| (JSC::JSCastingHelpers::inheritsJSTypeImpl): |
| (JSC::JSCastingHelpers::InheritsTraits::inherits): |
| (JSC::JSCastingHelpers::inherits): |
| (JSC::jsDynamicCast): |
| (JSC::JSCastingHelpers::jsDynamicCastGenericImpl): Deleted. |
| (JSC::JSCastingHelpers::jsDynamicCastJSTypeImpl): Deleted. |
| (JSC::JSCastingHelpers::JSDynamicCastTraits::cast): Deleted. |
| * runtime/JSCell.h: |
| * runtime/JSCellInlines.h: |
| (JSC::JSCell::inherits const): |
| * runtime/JSFunction.cpp: |
| (JSC::RetrieveCallerFunctionFunctor::operator() const): |
| (JSC::JSFunction::callerGetter): |
| (JSC::JSFunction::getOwnNonIndexPropertyNames): |
| (JSC::JSFunction::reifyLazyBoundNameIfNeeded): |
| * runtime/JSGlobalObject.cpp: |
| (JSC::enqueueJob): |
| * runtime/JSGlobalObject.h: |
| (JSC::asGlobalObject): Deleted. |
| * runtime/JSInternalPromiseDeferred.cpp: |
| (JSC::JSInternalPromiseDeferred::create): |
| * runtime/JSLexicalEnvironment.h: |
| (JSC::asActivation): |
| * runtime/JSONObject.cpp: |
| (JSC::unwrapBoxedPrimitive): |
| (JSC::Stringifier::Stringifier): |
| (JSC::Walker::walk): |
| * runtime/JSPromise.cpp: |
| (JSC::JSPromise::resolve): |
| * runtime/JSPromiseDeferred.cpp: |
| (JSC::JSPromiseDeferred::create): |
| * runtime/JSType.h: |
| * runtime/ProxyObject.h: |
| (JSC::ProxyObject::create): Deleted. |
| (JSC::ProxyObject::createStructure): Deleted. |
| (JSC::ProxyObject::target const): Deleted. |
| (JSC::ProxyObject::handler const): Deleted. |
| * runtime/RegExpConstructor.cpp: |
| (JSC::constructRegExp): |
| * runtime/RegExpConstructor.h: |
| (JSC::asRegExpConstructor): |
| (JSC::isRegExp): |
| * runtime/RegExpObject.cpp: |
| (JSC::RegExpObject::finishCreation): |
| (JSC::RegExpObject::getOwnPropertySlot): |
| (JSC::RegExpObject::defineOwnProperty): |
| (JSC::regExpObjectSetLastIndexStrict): |
| (JSC::regExpObjectSetLastIndexNonStrict): |
| (JSC::RegExpObject::put): |
| * runtime/RegExpObject.h: |
| (JSC::RegExpObject::create): Deleted. |
| (JSC::RegExpObject::setRegExp): Deleted. |
| (JSC::RegExpObject::regExp const): Deleted. |
| (JSC::RegExpObject::setLastIndex): Deleted. |
| (JSC::RegExpObject::getLastIndex const): Deleted. |
| (JSC::RegExpObject::test): Deleted. |
| (JSC::RegExpObject::testInline): Deleted. |
| (JSC::RegExpObject::createStructure): Deleted. |
| (JSC::RegExpObject::offsetOfRegExp): Deleted. |
| (JSC::RegExpObject::offsetOfLastIndex): Deleted. |
| (JSC::RegExpObject::offsetOfLastIndexIsWritable): Deleted. |
| (JSC::RegExpObject::allocationSize): Deleted. |
| (JSC::asRegExpObject): Deleted. |
| * runtime/RegExpPrototype.cpp: |
| (JSC::regExpProtoFuncTestFast): |
| (JSC::regExpProtoFuncExec): |
| (JSC::regExpProtoFuncMatchFast): |
| (JSC::regExpProtoFuncCompile): |
| (JSC::regExpProtoGetterGlobal): |
| (JSC::regExpProtoGetterIgnoreCase): |
| (JSC::regExpProtoGetterMultiline): |
| (JSC::regExpProtoGetterDotAll): |
| (JSC::regExpProtoGetterSticky): |
| (JSC::regExpProtoGetterUnicode): |
| (JSC::regExpProtoGetterSource): |
| (JSC::regExpProtoFuncSearchFast): |
| (JSC::regExpProtoFuncSplitFast): |
| * runtime/StringObject.h: |
| (JSC::asStringObject): Deleted. |
| * runtime/StringPrototype.cpp: |
| (JSC::replaceUsingRegExpSearch): |
| (JSC::replace): |
| (JSC::stringProtoFuncReplaceUsingRegExp): |
| (JSC::stringProtoFuncToString): |
| * runtime/SymbolPrototype.cpp: |
| (JSC::symbolProtoFuncToString): |
| (JSC::symbolProtoFuncValueOf): |
| * tools/JSDollarVM.cpp: |
| (WTF::customGetValue): |
| (WTF::customSetValue): |
| * wasm/js/JSWebAssemblyHelpers.h: |
| (JSC::isWebAssemblyHostFunction): |
| * wasm/js/WebAssemblyWrapperFunction.cpp: |
| (JSC::WebAssemblyWrapperFunction::create): |
| |
| 2018-03-07 Tim Horton <timothy_horton@apple.com> |
| |
| Sort and separate FeatureDefines.xcconfig |
| https://bugs.webkit.org/show_bug.cgi?id=183427 |
| |
| Reviewed by Dan Bernstein. |
| |
| * Configurations/FeatureDefines.xcconfig: |
| Sort and split FeatureDefines into paragraphs |
| (to make it easier to sort later). |
| |
| 2018-03-07 Keith Miller <keith_miller@apple.com> |
| |
| Unreviewed, fix 32-bit build. |
| |
| * dfg/DFGSpeculativeJIT.cpp: |
| (JSC::DFG::SpeculativeJIT::compileCallDOMGetter): |
| |
| 2018-03-07 Keith Miller <keith_miller@apple.com> |
| |
| Meta-program setupArguments and callOperation |
| https://bugs.webkit.org/show_bug.cgi?id=183263 |
| |
| Rubber-stamped by Filip Pizlo. |
| |
| This patch removes all the custom overrides of callOperation and setupArguments |
| throughout the JITs. In their place there is a new setupArguments that marshalls |
| the arguments into place based on the type of the operation's function pointer. |
| There were a couple of design choices in the implementation of setupArguments: |
| |
| 1) We assume that no TrustedImm floating point values are passed. |
| 2) If ExecState* is the first argument the callFrameRegister should be marshalled implicitly. |
| 3) Types should not be implicitly converted (with the exception of DFG::RegisteredStructure -> Structure*) |
| |
| The new callOperation/setupArguments do their best to make sure |
| it's hard to call a function with the wrong parameters. They will |
| only try to pattern match if the types match up with the next |
| passed argument. Additionally, the base case should static_assert |
| of the number of inferred arguments does not match the arity of |
| the operation's function pointer. |
| |
| * assembler/AbstractMacroAssembler.h: |
| (JSC::AbstractMacroAssembler::TrustedImmPtr::TrustedImmPtr): |
| (JSC::AbstractMacroAssembler::TrustedImmPtr::asPtr): |
| * assembler/MacroAssembler.h: |
| (JSC::MacroAssembler::poke): |
| (JSC::MacroAssembler::move): |
| * assembler/MacroAssemblerARM64.h: |
| (JSC::MacroAssemblerARM64::swap): |
| * assembler/MacroAssemblerX86.h: |
| (JSC::MacroAssemblerX86::storeDouble): |
| * assembler/MacroAssemblerX86Common.h: |
| (JSC::MacroAssemblerX86Common::loadDouble): |
| (JSC::MacroAssemblerX86Common::swap): |
| (JSC::MacroAssemblerX86Common::move): |
| * bytecode/AccessCase.cpp: |
| (JSC::AccessCase::generateImpl): |
| * bytecode/AccessCaseSnippetParams.cpp: |
| (JSC::SlowPathCallGeneratorWithArguments::generateImpl): |
| * bytecode/PolymorphicAccess.cpp: |
| (JSC::AccessGenerationState::emitExplicitExceptionHandler): |
| * dfg/DFGCallArrayAllocatorSlowPathGenerator.h: |
| * dfg/DFGNode.h: |
| * dfg/DFGOSRExit.cpp: |
| (JSC::DFG::OSRExit::emitRestoreArguments): |
| * dfg/DFGOSRExitCompilerCommon.cpp: |
| (JSC::DFG::osrWriteBarrier): |
| * dfg/DFGOperations.cpp: |
| * dfg/DFGOperations.h: |
| * dfg/DFGSlowPathGenerator.h: |
| * dfg/DFGSpeculativeJIT.cpp: |
| (JSC::DFG::SpeculativeJIT::compileArithDoubleUnaryOp): |
| (JSC::DFG::SpeculativeJIT::compileArithMod): |
| (JSC::DFG::SpeculativeJIT::compileArithRounding): |
| (JSC::DFG::SpeculativeJIT::compileArithSqrt): |
| (JSC::DFG::SpeculativeJIT::compileCreateActivation): |
| (JSC::DFG::SpeculativeJIT::compileCallDOMGetter): |
| (JSC::DFG::SpeculativeJIT::emitSwitchStringOnString): |
| * dfg/DFGSpeculativeJIT.h: |
| (JSC::DFG::SpeculativeJIT::TrustedImmPtr::TrustedImmPtr): |
| (JSC::DFG::SpeculativeJIT::TrustedImmPtr::operator MacroAssembler::TrustedImm const): |
| (JSC::DFG::SpeculativeJIT::initConstantInfo): |
| (JSC::DFG::SpeculativeJIT::callOperation): |
| (JSC::DFG::SpeculativeJIT::callOperationWithCallFrameRollbackOnException): |
| (JSC::DFG::SpeculativeJIT::callCustomGetter): Deleted. |
| * dfg/DFGSpeculativeJIT32_64.cpp: |
| (JSC::DFG::SpeculativeJIT::cachedGetById): |
| (JSC::DFG::SpeculativeJIT::cachedGetByIdWithThis): |
| (JSC::DFG::SpeculativeJIT::cachedPutById): |
| (JSC::DFG::SpeculativeJIT::emitCall): |
| (JSC::DFG::SpeculativeJIT::compileContiguousPutByVal): |
| (JSC::DFG::SpeculativeJIT::compile): |
| * dfg/DFGSpeculativeJIT64.cpp: |
| (JSC::DFG::SpeculativeJIT::emitCall): |
| (JSC::DFG::SpeculativeJIT::compile): |
| * ftl/FTLLowerDFGToB3.cpp: |
| (JSC::FTL::DFG::LowerDFGToB3::compileCallOrConstructVarargsSpread): |
| (JSC::FTL::DFG::LowerDFGToB3::compileCallOrConstructVarargs): |
| (JSC::FTL::DFG::LowerDFGToB3::compileCallEval): |
| * ftl/FTLOSRExitCompiler.cpp: |
| (JSC::FTL::compileStub): |
| * ftl/FTLSlowPathCall.h: |
| (JSC::FTL::callOperation): |
| * jit/AssemblyHelpers.cpp: |
| (JSC::AssemblyHelpers::emitStoreStructureWithTypeInfo): |
| * jit/CCallHelpers.cpp: |
| (JSC::CCallHelpers::ensureShadowChickenPacket): |
| * jit/CCallHelpers.h: |
| (JSC::CCallHelpers::setupArgument): |
| (JSC::CCallHelpers::setupStubArgs): |
| (JSC::CCallHelpers::ArgCollection::ArgCollection): |
| (JSC::CCallHelpers::ArgCollection::pushRegArg): |
| (JSC::CCallHelpers::ArgCollection::addGPRArg): |
| (JSC::CCallHelpers::ArgCollection::addStackArg): |
| (JSC::CCallHelpers::ArgCollection::addPoke): |
| (JSC::CCallHelpers::ArgCollection::argCount): |
| (JSC::CCallHelpers::clampArrayToSize): |
| (JSC::CCallHelpers::pokeForArgument): |
| (JSC::CCallHelpers::marshallArgumentRegister): |
| (JSC::CCallHelpers::setupArgumentsImpl): |
| (JSC::CCallHelpers::std::is_integral<CURRENT_ARGUMENT_TYPE>::value): |
| (JSC::CCallHelpers::std::is_pointer<CURRENT_ARGUMENT_TYPE>::value): |
| (JSC::CCallHelpers::setupArguments): |
| (JSC::CCallHelpers::prepareForTailCallSlow): |
| (JSC::CCallHelpers::setupArgumentsWithExecState): Deleted. |
| (JSC::CCallHelpers::resetCallArguments): Deleted. |
| (JSC::CCallHelpers::addCallArgument): Deleted. |
| (JSC::CCallHelpers::setupArgumentsExecState): Deleted. |
| (JSC::CCallHelpers::setupTwoStubArgsGPR): Deleted. |
| (JSC::CCallHelpers::setupThreeStubArgsGPR): Deleted. |
| (JSC::CCallHelpers::setupFourStubArgsGPR): Deleted. |
| (JSC::CCallHelpers::setupFiveStubArgsGPR): Deleted. |
| (JSC::CCallHelpers::setupTwoStubArgsFPR): Deleted. |
| (JSC::CCallHelpers::setupStubArguments): Deleted. |
| (JSC::CCallHelpers::setupArgumentsWithExecStateForCallWithSlowPathReturnType): Deleted. |
| (JSC::CCallHelpers::setupStubArguments134): Deleted. |
| (JSC::CCallHelpers::setupStubArgsGPR): Deleted. |
| * jit/FPRInfo.h: |
| (JSC::toInfoFromReg): |
| * jit/GPRInfo.h: |
| (JSC::JSValueRegs::JSValueRegs): |
| (JSC::toInfoFromReg): |
| * jit/JIT.h: |
| (JSC::JIT::callOperation): |
| (JSC::JIT::callOperationWithProfile): |
| (JSC::JIT::callOperationWithResult): |
| (JSC::JIT::callOperationNoExceptionCheck): |
| (JSC::JIT::callOperationWithCallFrameRollbackOnException): |
| * jit/JITArithmetic.cpp: |
| (JSC::JIT::emitMathICFast): |
| (JSC::JIT::emitMathICSlow): |
| * jit/JITArithmetic32_64.cpp: |
| (JSC::JIT::emit_compareAndJumpSlow): |
| * jit/JITCall32_64.cpp: |
| (JSC::JIT::compileSetupVarargsFrame): |
| * jit/JITInlines.h: |
| (JSC::JIT::callOperation): Deleted. |
| (JSC::JIT::callOperationNoExceptionCheck): Deleted. |
| (JSC::JIT::callOperationWithCallFrameRollbackOnException): Deleted. |
| * jit/JITOpcodes.cpp: |
| (JSC::JIT::emit_op_new_array_with_size): |
| * jit/JITOpcodes32_64.cpp: |
| (JSC::JIT::emitSlow_op_instanceof): |
| (JSC::JIT::emitSlow_op_instanceof_custom): |
| (JSC::JIT::emit_op_set_function_name): |
| (JSC::JIT::emitSlow_op_eq): |
| (JSC::JIT::emitSlow_op_neq): |
| (JSC::JIT::emit_op_throw): |
| (JSC::JIT::emit_op_switch_imm): |
| (JSC::JIT::emit_op_switch_char): |
| (JSC::JIT::emit_op_switch_string): |
| (JSC::JIT::emitSlow_op_has_indexed_property): |
| * jit/JITOperations.cpp: |
| * jit/JITOperations.h: |
| * jit/JITPropertyAccess.cpp: |
| (JSC::JIT::emitGetByValWithCachedId): |
| (JSC::JIT::emitSlow_op_get_by_id): |
| (JSC::JIT::emitSlow_op_get_by_id_with_this): |
| (JSC::JIT::emitSlow_op_get_from_scope): |
| * jit/JITPropertyAccess32_64.cpp: |
| (JSC::JIT::emit_op_put_by_index): |
| (JSC::JIT::emit_op_put_setter_by_id): |
| (JSC::JIT::emit_op_put_getter_setter_by_id): |
| (JSC::JIT::emit_op_put_getter_by_val): |
| (JSC::JIT::emit_op_put_setter_by_val): |
| (JSC::JIT::emit_op_del_by_id): |
| (JSC::JIT::emit_op_del_by_val): |
| (JSC::JIT::emitGetByValWithCachedId): |
| (JSC::JIT::emitSlow_op_get_by_val): |
| (JSC::JIT::emitPutByValWithCachedId): |
| (JSC::JIT::emitSlow_op_put_by_val): |
| (JSC::JIT::emitSlow_op_try_get_by_id): |
| (JSC::JIT::emitSlow_op_get_by_id): |
| (JSC::JIT::emitSlow_op_get_by_id_with_this): |
| (JSC::JIT::emitSlow_op_put_by_id): |
| (JSC::JIT::emitSlow_op_get_from_scope): |
| * jit/RegisterSet.h: |
| (JSC::RegisterSet::RegisterSet): |
| * jit/ThunkGenerators.cpp: |
| (JSC::throwExceptionFromCallSlowPathGenerator): |
| (JSC::slowPathFor): |
| * jsc.cpp: |
| (GlobalObject::finishCreation): |
| (functionBreakpoint): |
| * runtime/JSCJSValue.h: |
| * wasm/js/WasmToJS.cpp: |
| (JSC::Wasm::wasmToJS): |
| |
| 2018-03-07 Mark Lam <mark.lam@apple.com> |
| |
| Rename ProtoCallFrame::arityMissMatch to hasArityMismatch. |
| https://bugs.webkit.org/show_bug.cgi?id=183414 |
| <rdar://problem/38231678> |
| |
| Reviewed by Michael Saboff. |
| |
| * interpreter/ProtoCallFrame.cpp: |
| (JSC::ProtoCallFrame::init): |
| * interpreter/ProtoCallFrame.h: |
| |
| 2018-03-07 Mark Lam <mark.lam@apple.com> |
| |
| Simplify the variants of FunctionPtr constructors. |
| https://bugs.webkit.org/show_bug.cgi?id=183399 |
| <rdar://problem/38212980> |
| |
| Reviewed by Yusuke Suzuki. |
| |
| * assembler/MacroAssemblerCodeRef.h: |
| (JSC::FunctionPtr::FunctionPtr): |
| |
| 2018-03-06 Filip Pizlo <fpizlo@apple.com> |
| |
| MarkedArgumentsBuffer should allocate from the JSValue Gigacage |
| https://bugs.webkit.org/show_bug.cgi?id=183377 |
| |
| Reviewed by Michael Saboff. |
| |
| That prevents it from being used to pivot UAF on malloc memory into corruption in the JS heap. |
| |
| * runtime/ArgList.cpp: |
| (JSC::MarkedArgumentBuffer::expandCapacity): |
| |
| 2018-03-07 Mark Lam <mark.lam@apple.com> |
| |
| Add support for ARM64E. |
| https://bugs.webkit.org/show_bug.cgi?id=183398 |
| <rdar://problem/38212621> |
| |
| Reviewed by Michael Saboff. |
| |
| * assembler/MacroAssembler.h: |
| * llint/LLIntOfflineAsmConfig.h: |
| * llint/LowLevelInterpreter.asm: |
| * llint/LowLevelInterpreter64.asm: |
| * offlineasm/backends.rb: |
| |
| 2018-03-07 Yusuke Suzuki <utatane.tea@gmail.com> |
| |
| HTML `pattern` attribute should set `u` flag for regular expressions |
| https://bugs.webkit.org/show_bug.cgi?id=151598 |
| |
| Reviewed by Chris Dumez. |
| |
| Add UnicodeMode for JSC::Yarr::RegularExpression. |
| |
| * yarr/RegularExpression.cpp: |
| (JSC::Yarr::RegularExpression::Private::create): |
| (JSC::Yarr::RegularExpression::Private::Private): |
| (JSC::Yarr::RegularExpression::Private::compile): |
| (JSC::Yarr::RegularExpression::RegularExpression): |
| * yarr/RegularExpression.h: |
| |
| 2018-03-07 Yusuke Suzuki <utatane.tea@gmail.com> |
| |
| [JSC] Add more JSType based fast path for jsDynamicCast |
| https://bugs.webkit.org/show_bug.cgi?id=183403 |
| |
| Reviewed by Mark Lam. |
| |
| We add more JSType based fast path for jsDynamicCast. Basically, we add miscellaneous JSTypes which |
| are used for jsDynamicCast in JSC, arguments types, and scope types. |
| |
| We also add ClassInfo to JSScope and JSSegmentedVariableObject since they are used with jsDynamicCast. |
| |
| * jit/JITOperations.cpp: |
| * llint/LLIntSlowPaths.cpp: |
| (JSC::LLInt::setUpCall): |
| * runtime/ClonedArguments.h: |
| (JSC::ClonedArguments::specialsMaterialized const): Deleted. |
| * runtime/DirectArguments.h: |
| (JSC::DirectArguments::subspaceFor): Deleted. |
| (JSC::DirectArguments::internalLength const): Deleted. |
| (JSC::DirectArguments::length const): Deleted. |
| (JSC::DirectArguments::isMappedArgument const): Deleted. |
| (JSC::DirectArguments::isMappedArgumentInDFG const): Deleted. |
| (JSC::DirectArguments::getIndexQuickly const): Deleted. |
| (JSC::DirectArguments::setIndexQuickly): Deleted. |
| (JSC::DirectArguments::callee): Deleted. |
| (JSC::DirectArguments::argument): Deleted. |
| (JSC::DirectArguments::overrodeThings const): Deleted. |
| (JSC::DirectArguments::initModifiedArgumentsDescriptorIfNecessary): Deleted. |
| (JSC::DirectArguments::setModifiedArgumentDescriptor): Deleted. |
| (JSC::DirectArguments::isModifiedArgumentDescriptor): Deleted. |
| (JSC::DirectArguments::offsetOfCallee): Deleted. |
| (JSC::DirectArguments::offsetOfLength): Deleted. |
| (JSC::DirectArguments::offsetOfMinCapacity): Deleted. |
| (JSC::DirectArguments::offsetOfMappedArguments): Deleted. |
| (JSC::DirectArguments::offsetOfModifiedArgumentsDescriptor): Deleted. |
| (JSC::DirectArguments::storageOffset): Deleted. |
| (JSC::DirectArguments::offsetOfSlot): Deleted. |
| (JSC::DirectArguments::allocationSize): Deleted. |
| (JSC::DirectArguments::storage): Deleted. |
| * runtime/JSCast.h: |
| * runtime/JSGlobalLexicalEnvironment.h: |
| (JSC::JSGlobalLexicalEnvironment::create): Deleted. |
| (JSC::JSGlobalLexicalEnvironment::isEmpty const): Deleted. |
| (JSC::JSGlobalLexicalEnvironment::createStructure): Deleted. |
| (JSC::JSGlobalLexicalEnvironment::JSGlobalLexicalEnvironment): Deleted. |
| * runtime/JSGlobalObject.cpp: |
| (JSC::JSGlobalObject::finishCreation): |
| * runtime/JSMap.h: |
| (JSC::isJSMap): Deleted. |
| * runtime/JSModuleEnvironment.h: |
| (JSC::JSModuleEnvironment::create): Deleted. |
| (JSC::JSModuleEnvironment::createStructure): Deleted. |
| (JSC::JSModuleEnvironment::offsetOfModuleRecord): Deleted. |
| (JSC::JSModuleEnvironment::allocationSize): Deleted. |
| (JSC::JSModuleEnvironment::moduleRecord): Deleted. |
| (JSC::JSModuleEnvironment::moduleRecordSlot): Deleted. |
| * runtime/JSObject.cpp: |
| (JSC::canDoFastPutDirectIndex): |
| (JSC::JSObject::defineOwnIndexedProperty): |
| (JSC::JSObject::putDirectIndexSlowOrBeyondVectorLength): |
| * runtime/JSObject.h: |
| (JSC::JSFinalObject::allocationSize): Deleted. |
| (JSC::JSFinalObject::typeInfo): Deleted. |
| (JSC::JSFinalObject::defaultInlineCapacity): Deleted. |
| (JSC::JSFinalObject::maxInlineCapacity): Deleted. |
| (JSC::JSFinalObject::createStructure): Deleted. |
| (JSC::JSFinalObject::finishCreation): Deleted. |
| (JSC::JSFinalObject::JSFinalObject): Deleted. |
| (JSC::isJSFinalObject): Deleted. |
| * runtime/JSScope.cpp: |
| * runtime/JSScope.h: |
| * runtime/JSSegmentedVariableObject.cpp: |
| * runtime/JSSegmentedVariableObject.h: |
| * runtime/JSSet.h: |
| (JSC::isJSSet): Deleted. |
| * runtime/JSType.h: |
| * runtime/JSWeakMap.h: |
| (JSC::isJSWeakMap): Deleted. |
| * runtime/JSWeakSet.h: |
| (JSC::isJSWeakSet): Deleted. |
| * runtime/JSWithScope.h: |
| (JSC::JSWithScope::object): Deleted. |
| * runtime/MapConstructor.cpp: |
| (JSC::constructMap): |
| (JSC::mapPrivateFuncMapBucketHead): |
| * runtime/MapPrototype.cpp: |
| (JSC::getMap): |
| * runtime/NumberObject.cpp: |
| (JSC::NumberObject::finishCreation): |
| * runtime/NumberPrototype.cpp: |
| (JSC::toThisNumber): |
| (JSC::numberProtoFuncToExponential): |
| (JSC::numberProtoFuncToFixed): |
| (JSC::numberProtoFuncToPrecision): |
| (JSC::numberProtoFuncToString): |
| (JSC::numberProtoFuncToLocaleString): |
| (JSC::numberProtoFuncValueOf): |
| * runtime/ObjectConstructor.cpp: |
| (JSC::objectConstructorSeal): |
| (JSC::objectConstructorFreeze): |
| (JSC::objectConstructorIsSealed): |
| (JSC::objectConstructorIsFrozen): |
| * runtime/ProxyObject.cpp: |
| (JSC::ProxyObject::finishCreation): |
| * runtime/ScopedArguments.h: |
| (JSC::ScopedArguments::subspaceFor): Deleted. |
| (JSC::ScopedArguments::internalLength const): Deleted. |
| (JSC::ScopedArguments::length const): Deleted. |
| (JSC::ScopedArguments::isMappedArgument const): Deleted. |
| (JSC::ScopedArguments::isMappedArgumentInDFG const): Deleted. |
| (JSC::ScopedArguments::getIndexQuickly const): Deleted. |
| (JSC::ScopedArguments::setIndexQuickly): Deleted. |
| (JSC::ScopedArguments::callee): Deleted. |
| (JSC::ScopedArguments::overrodeThings const): Deleted. |
| (JSC::ScopedArguments::initModifiedArgumentsDescriptorIfNecessary): Deleted. |
| (JSC::ScopedArguments::setModifiedArgumentDescriptor): Deleted. |
| (JSC::ScopedArguments::isModifiedArgumentDescriptor): Deleted. |
| (JSC::ScopedArguments::offsetOfOverrodeThings): Deleted. |
| (JSC::ScopedArguments::offsetOfTotalLength): Deleted. |
| (JSC::ScopedArguments::offsetOfTable): Deleted. |
| (JSC::ScopedArguments::offsetOfScope): Deleted. |
| (JSC::ScopedArguments::overflowStorageOffset): Deleted. |
| (JSC::ScopedArguments::allocationSize): Deleted. |
| (JSC::ScopedArguments::overflowStorage const): Deleted. |
| * runtime/SetConstructor.cpp: |
| (JSC::constructSet): |
| (JSC::setPrivateFuncSetBucketHead): |
| * runtime/SetPrototype.cpp: |
| (JSC::getSet): |
| * runtime/StrictEvalActivation.h: |
| (JSC::StrictEvalActivation::create): Deleted. |
| (JSC::StrictEvalActivation::createStructure): Deleted. |
| * runtime/WeakMapPrototype.cpp: |
| (JSC::getWeakMap): |
| * runtime/WeakSetPrototype.cpp: |
| (JSC::getWeakSet): |
| |
| 2018-03-07 Dominik Infuehr <dinfuehr@igalia.com> |
| |
| [ARM] offlineasm: fix indentation in armOpcodeReversedOperands |
| https://bugs.webkit.org/show_bug.cgi?id=183400 |
| |
| Reviewed by Mark Lam. |
| |
| * offlineasm/arm.rb: |
| |
| 2018-03-06 Mark Lam <mark.lam@apple.com> |
| |
| Prepare LLInt code to support pointer profiling. |
| https://bugs.webkit.org/show_bug.cgi?id=183387 |
| <rdar://problem/38199678> |
| |
| Reviewed by JF Bastien. |
| |
| 1. Introduced PtrTag enums for supporting pointer profiling later. |
| |
| 2. Also introduced tagging, untagging, retagging, and tag removal placeholder |
| template functions for the same purpose. |
| |
| 3. Prepare the offlineasm for supporting pointer profiling later. |
| |
| 4. Tagged some pointers in LLInt asm code. Currently, these should have no |
| effect on behavior. |
| |
| 5. Removed returnToThrowForThrownException() because it is not used anywhere. |
| |
| 6. Added the offlineasm folder to JavaScriptCore Xcode project so that it's |
| easier to view and edit these files in Xcode. |
| |
| * CMakeLists.txt: |
| * JavaScriptCore.xcodeproj/project.pbxproj: |
| * bytecode/LLIntCallLinkInfo.h: |
| (JSC::LLIntCallLinkInfo::unlink): |
| * llint/LLIntData.cpp: |
| (JSC::LLInt::initialize): |
| * llint/LLIntData.h: |
| * llint/LLIntExceptions.cpp: |
| (JSC::LLInt::returnToThrowForThrownException): Deleted. |
| * llint/LLIntExceptions.h: |
| * llint/LLIntOfflineAsmConfig.h: |
| * llint/LLIntOffsetsExtractor.cpp: |
| * llint/LLIntPCRanges.h: |
| (JSC::LLInt::isLLIntPC): |
| * llint/LLIntSlowPaths.cpp: |
| (JSC::LLInt::LLINT_SLOW_PATH_DECL): |
| (JSC::LLInt::handleHostCall): |
| (JSC::LLInt::setUpCall): |
| * llint/LowLevelInterpreter.asm: |
| * llint/LowLevelInterpreter32_64.asm: |
| * llint/LowLevelInterpreter64.asm: |
| * offlineasm/ast.rb: |
| * offlineasm/instructions.rb: |
| * offlineasm/risc.rb: |
| * runtime/PtrTag.h: Added. |
| (JSC::uniquePtrTagID): |
| (JSC::ptrTag): |
| (JSC::tagCodePtr): |
| (JSC::untagCodePtr): |
| (JSC::retagCodePtr): |
| (JSC::removeCodePtrTag): |
| |
| 2018-03-06 Dominik Infuehr <dinfuehr@igalia.com> |
| |
| [ARM] Assembler warnings: "use of r13 is deprecated" |
| https://bugs.webkit.org/show_bug.cgi?id=183286 |
| |
| Reviewed by Mark Lam. |
| |
| Usage of sp/r13 as operand Rm is deprecated on ARM. offlineasm |
| sometimes generates assembly code that triggers this warning. Prevent |
| this by simply switching operands. |
| |
| * offlineasm/arm.rb: |
| |
| 2018-03-06 Yusuke Suzuki <utatane.tea@gmail.com> |
| |
| Unreviewed, fix incorrect assertion after r229309 |
| https://bugs.webkit.org/show_bug.cgi?id=182975 |
| |
| * runtime/TypeProfilerLog.cpp: |
| (JSC::TypeProfilerLog::TypeProfilerLog): |
| |
| 2018-03-05 Yusuke Suzuki <utatane.tea@gmail.com> |
| |
| Fix std::make_unique / new[] using system malloc |
| https://bugs.webkit.org/show_bug.cgi?id=182975 |
| |
| Reviewed by JF Bastien. |
| |
| Use Vector, FAST_ALLOCATED, or UniqueArray instead. |
| |
| * API/JSStringRefCF.cpp: |
| (JSStringCreateWithCFString): |
| * bytecode/BytecodeKills.h: |
| * bytecode/BytecodeLivenessAnalysis.cpp: |
| (JSC::BytecodeLivenessAnalysis::computeKills): |
| * dfg/DFGDisassembler.cpp: |
| (JSC::DFG::Disassembler::dumpDisassembly): |
| * jit/PolymorphicCallStubRoutine.cpp: |
| (JSC::PolymorphicCallStubRoutine::PolymorphicCallStubRoutine): |
| * jit/PolymorphicCallStubRoutine.h: |
| * jit/Repatch.cpp: |
| (JSC::linkPolymorphicCall): |
| * jsc.cpp: |
| (currentWorkingDirectory): |
| * llint/LLIntData.cpp: |
| (JSC::LLInt::initialize): |
| * llint/LLIntData.h: |
| * runtime/ArgList.h: |
| * runtime/StructureChain.h: |
| * runtime/StructureIDTable.cpp: |
| (JSC::StructureIDTable::StructureIDTable): |
| (JSC::StructureIDTable::resize): |
| * runtime/StructureIDTable.h: |
| * runtime/TypeProfilerLog.cpp: |
| (JSC::TypeProfilerLog::TypeProfilerLog): |
| (JSC::TypeProfilerLog::initializeLog): Deleted. |
| * runtime/TypeProfilerLog.h: |
| (JSC::TypeProfilerLog::TypeProfilerLog): Deleted. |
| * runtime/VM.cpp: |
| (JSC::VM::~VM): |
| (JSC::VM::acquireRegExpPatternContexBuffer): |
| * runtime/VM.h: |
| * testRegExp.cpp: |
| (runFromFiles): |
| * tools/HeapVerifier.cpp: |
| (JSC::HeapVerifier::HeapVerifier): |
| * tools/HeapVerifier.h: |
| |
| 2018-03-05 Mark Lam <mark.lam@apple.com> |
| |
| JITThunk functions should only be called when the JIT is enabled. |
| https://bugs.webkit.org/show_bug.cgi?id=183351 |
| <rdar://problem/38160091> |
| |
| Reviewed by Keith Miller. |
| |
| * jit/JITThunks.cpp: |
| (JSC::JITThunks::ctiNativeCall): |
| (JSC::JITThunks::ctiNativeConstruct): |
| (JSC::JITThunks::ctiInternalFunctionCall): |
| (JSC::JITThunks::ctiInternalFunctionConstruct): |
| * runtime/VM.cpp: |
| (JSC::VM::VM): |
| (JSC::VM::getCTIInternalFunctionTrampolineFor): |
| |
| 2018-03-05 Mark Lam <mark.lam@apple.com> |
| |
| Gardening: build fix. |
| |
| Not reviewed. |
| |
| * interpreter/AbstractPC.h: |
| (JSC::AbstractPC::AbstractPC): |
| |
| 2018-03-05 Yusuke Suzuki <utatane.tea@gmail.com> |
| |
| [JSC] Use WTF::ArithmeticOperations for CLoop overflow operations |
| https://bugs.webkit.org/show_bug.cgi?id=183324 |
| |
| Reviewed by JF Bastien. |
| |
| We have WTF::ArithmeticOperations which has operations with overflow checking. |
| This is suitable for CLoop's overflow checking operations. This patch emits |
| WTF::ArithmeticOperations for CLoop's overflow checking operations. And it is |
| lowered to optimized code using CPU's overflow flag. |
| |
| * offlineasm/cloop.rb: |
| |
| 2018-03-05 Don Olmstead <don.olmstead@sony.com> |
| |
| [CMake] Split JSC header copying into public and private targets |
| https://bugs.webkit.org/show_bug.cgi?id=183251 |
| |
| Reviewed by Konstantin Tokarev. |
| |
| * CMakeLists.txt: |
| |
| 2018-03-04 Yusuke Suzuki <utatane.tea@gmail.com> |
| |
| [WTF] Move currentCPUTime and sleep(Seconds) to CPUTime.h and Seconds.h respectively |
| https://bugs.webkit.org/show_bug.cgi?id=183312 |
| |
| Reviewed by Mark Lam. |
| |
| Remove wtf/CurrentTime.h include pragma. |
| |
| * API/tests/ExecutionTimeLimitTest.cpp: |
| (currentCPUTimeAsJSFunctionCallback): |
| (testExecutionTimeLimit): |
| * bytecode/SuperSampler.cpp: |
| * dfg/DFGPlan.cpp: |
| * heap/BlockDirectory.cpp: |
| * heap/Heap.cpp: |
| * heap/IncrementalSweeper.cpp: |
| * inspector/agents/InspectorConsoleAgent.cpp: |
| * inspector/agents/InspectorRuntimeAgent.cpp: |
| * profiler/ProfilerDatabase.cpp: |
| * runtime/CodeCache.h: |
| * runtime/JSDateMath.cpp: |
| * runtime/TypeProfilerLog.cpp: |
| * runtime/VM.cpp: |
| * runtime/Watchdog.cpp: |
| (JSC::Watchdog::shouldTerminate): |
| (JSC::Watchdog::startTimer): |
| * testRegExp.cpp: |
| * wasm/js/JSWebAssemblyCodeBlock.cpp: |
| |
| 2018-03-04 Tim Horton <timothy_horton@apple.com> |
| |
| Make !ENABLE(DATA_DETECTION) iOS build actually succeed |
| https://bugs.webkit.org/show_bug.cgi?id=183283 |
| <rdar://problem/38062148> |
| |
| Reviewed by Sam Weinig. |
| |
| * Configurations/FeatureDefines.xcconfig: |
| |
| 2018-03-02 Mark Lam <mark.lam@apple.com> |
| |
| Make the LLInt probe work for ARM64. |
| https://bugs.webkit.org/show_bug.cgi?id=183298 |
| <rdar://problem/38077413> |
| |
| Reviewed by Filip Pizlo. |
| |
| * llint/LowLevelInterpreter.asm: |
| |
| 2018-03-02 Yusuke Suzuki <utatane.tea@gmail.com> |
| |
| [JSC] Annotate more classes with WTF_MAKE_FAST_ALLOCATED |
| https://bugs.webkit.org/show_bug.cgi?id=183279 |
| |
| Reviewed by JF Bastien. |
| |
| * bytecode/BytecodeIntrinsicRegistry.h: |
| * ftl/FTLThunks.h: |
| * heap/CodeBlockSet.h: |
| * heap/GCSegmentedArray.h: |
| * heap/MachineStackMarker.h: |
| * heap/MarkingConstraintSet.h: |
| |
| 2018-03-01 Yusuke Suzuki <utatane.tea@gmail.com> |
| |
| Remove monotonicallyIncreasingTime |
| https://bugs.webkit.org/show_bug.cgi?id=182911 |
| |
| Reviewed by Michael Catanzaro. |
| |
| * debugger/Debugger.cpp: |
| (JSC::Debugger::willEvaluateScript): |
| (JSC::Debugger::didEvaluateScript): |
| * debugger/Debugger.h: |
| * debugger/ScriptProfilingScope.h: |
| * inspector/agents/InspectorDebuggerAgent.cpp: |
| (Inspector::InspectorDebuggerAgent::breakpointActionProbe): |
| * inspector/agents/InspectorHeapAgent.cpp: |
| (Inspector::InspectorHeapAgent::snapshot): |
| (Inspector::InspectorHeapAgent::didGarbageCollect): |
| (Inspector::InspectorHeapAgent::dispatchGarbageCollectedEvent): |
| * inspector/agents/InspectorHeapAgent.h: |
| * inspector/agents/InspectorScriptProfilerAgent.cpp: |
| (Inspector::InspectorScriptProfilerAgent::startTracking): |
| (Inspector::InspectorScriptProfilerAgent::willEvaluateScript): |
| (Inspector::InspectorScriptProfilerAgent::didEvaluateScript): |
| (Inspector::InspectorScriptProfilerAgent::addEvent): |
| (Inspector::buildSamples): |
| * inspector/agents/InspectorScriptProfilerAgent.h: |
| * runtime/SamplingProfiler.cpp: |
| (JSC::SamplingProfiler::takeSample): |
| * runtime/SamplingProfiler.h: |
| |
| 2018-03-01 Yusuke Suzuki <utatane.tea@gmail.com> |
| |
| ASSERTION FAILED: matchContextualKeyword(m_vm->propertyNames->async) |
| https://bugs.webkit.org/show_bug.cgi?id=183173 |
| |
| Reviewed by Saam Barati. |
| |
| Classifier could propagate an error which does not occur at the first token |
| of the given expression. We should check whether the given token is "async" |
| instead of assertion. |
| |
| * parser/Parser.cpp: |
| (JSC::Parser<LexerType>::parseAssignmentExpression): |
| |
| 2018-03-01 Saam Barati <sbarati@apple.com> |
| |
| We need to clear cached structures when having a bad time |
| https://bugs.webkit.org/show_bug.cgi?id=183256 |
| <rdar://problem/36245022> |
| |
| Reviewed by Mark Lam. |
| |
| This patch makes both InternalFunctionAllocationProfile and the VM's |
| structure cache having-a-bad-time aware. For InternalFunctionAllocationProfile, |
| we clear them when they'd produce an object with a bad indexing type. |
| For the VM's Structure cache, we conservatively clear the entire cache |
| since it may be housing Structures with bad indexing types. |
| |
| * runtime/FunctionRareData.h: |
| (JSC::FunctionRareData::clearInternalFunctionAllocationProfile): |
| * runtime/JSGlobalObject.cpp: |
| (JSC::JSGlobalObject::haveABadTime): |
| * runtime/StructureCache.h: |
| (JSC::StructureCache::clear): |
| |
| 2018-03-01 Yusuke Suzuki <utatane.tea@gmail.com> |
| |
| Unreviewed, fix exception check for ExceptionScope |
| https://bugs.webkit.org/show_bug.cgi?id=183175 |
| |
| * jsc.cpp: |
| (GlobalObject::moduleLoaderFetch): |
| |
| 2018-02-28 Dominik Infuehr <dinfuehr@igalia.com> |
| |
| [ARM] Fix compile error in debug builds by invoking unpoisoned(). |
| |
| Reviewed by Mark Lam. |
| |
| * assembler/MacroAssemblerCodeRef.h: |
| (JSC::MacroAssemblerCodePtr::MacroAssemblerCodePtr): Fix compile error. |
| (JSC::MacroAssemblerCodePtr::createFromExecutableAddress()): Ditto. |
| (JSC::MacroAssemblerCodePtr::dataLocation()): Ditto. |
| * yarr/YarrInterpreter.cpp: |
| (JSC::Yarr::ByteCompiler::dumpDisjunction): use %zu for printf'ing size_t. |
| |
| 2018-02-28 JF Bastien <jfbastien@apple.com> |
| |
| GC should sweep code block before deleting |
| https://bugs.webkit.org/show_bug.cgi?id=183229 |
| <rdar://problem/32767615> |
| |
| Reviewed by Saam Barati, Fil Pizlo. |
| |
| Stub routines shouldn't get deleted before codeblocks have been |
| swept, otherwise there's a small race window where the codeblock |
| thinks it's still reachable. |
| |
| * heap/Heap.cpp: |
| (JSC::Heap::deleteUnmarkedCompiledCode): |
| (JSC::Heap::sweepInFinalize): |
| |
| 2018-02-28 Yusuke Suzuki <utatane.tea@gmail.com> |
| |
| JSC crash with `import("")` |
| https://bugs.webkit.org/show_bug.cgi?id=183175 |
| |
| Reviewed by Saam Barati. |
| |
| Add file existence and file type check for module loader implementation in jsc.cpp. |
| This is not safe for TOCTOU, but it is OK since this functionality is used for the |
| JSC shell (jsc.cpp): testing purpose. |
| |
| * jsc.cpp: |
| (fillBufferWithContentsOfFile): |
| (fetchModuleFromLocalFileSystem): |
| |
| 2018-02-27 Keith Miller <keith_miller@apple.com> |
| |
| Replace TrustedImmPtr(0) with TrustedImmPtr(nullptr) |
| https://bugs.webkit.org/show_bug.cgi?id=183195 |
| |
| Reviewed by Mark Lam. |
| |
| * assembler/AbstractMacroAssembler.h: |
| (JSC::AbstractMacroAssembler::TrustedImmPtr::TrustedImmPtr): |
| * assembler/MacroAssembler.h: |
| (JSC::MacroAssembler::patchableBranchPtr): |
| (JSC::MacroAssembler::patchableBranchPtrWithPatch): |
| * assembler/MacroAssemblerARM.h: |
| (JSC::MacroAssemblerARM::branchPtrWithPatch): |
| (JSC::MacroAssemblerARM::storePtrWithPatch): |
| * assembler/MacroAssemblerARM64.h: |
| (JSC::MacroAssemblerARM64::call): |
| (JSC::MacroAssemblerARM64::tailRecursiveCall): |
| (JSC::MacroAssemblerARM64::branchPtrWithPatch): |
| (JSC::MacroAssemblerARM64::patchableBranchPtrWithPatch): |
| (JSC::MacroAssemblerARM64::storePtrWithPatch): |
| * assembler/MacroAssemblerARMv7.h: |
| (JSC::MacroAssemblerARMv7::branchPtrWithPatch): |
| (JSC::MacroAssemblerARMv7::patchableBranchPtr): |
| (JSC::MacroAssemblerARMv7::patchableBranchPtrWithPatch): |
| (JSC::MacroAssemblerARMv7::storePtrWithPatch): |
| * assembler/MacroAssemblerMIPS.h: |
| (JSC::MacroAssemblerMIPS::branchPtrWithPatch): |
| (JSC::MacroAssemblerMIPS::storePtrWithPatch): |
| * assembler/MacroAssemblerX86.h: |
| (JSC::MacroAssemblerX86::branchPtrWithPatch): |
| * assembler/MacroAssemblerX86_64.h: |
| (JSC::MacroAssemblerX86_64::callWithSlowPathReturnType): |
| (JSC::MacroAssemblerX86_64::call): |
| (JSC::MacroAssemblerX86_64::tailRecursiveCall): |
| (JSC::MacroAssemblerX86_64::makeTailRecursiveCall): |
| (JSC::MacroAssemblerX86_64::branchPtrWithPatch): |
| * bytecode/AccessCase.cpp: |
| (JSC::AccessCase::generateImpl): |
| * dfg/DFGSpeculativeJIT.cpp: |
| (JSC::DFG::SpeculativeJIT::emitAllocateRawObject): |
| (JSC::DFG::SpeculativeJIT::compileToLowerCase): |
| (JSC::DFG::SpeculativeJIT::compileMakeRope): |
| (JSC::DFG::SpeculativeJIT::compileGetTypedArrayByteOffset): |
| (JSC::DFG::SpeculativeJIT::compileNewFunctionCommon): |
| (JSC::DFG::SpeculativeJIT::compileCreateDirectArguments): |
| (JSC::DFG::SpeculativeJIT::compileNewArrayWithSpread): |
| (JSC::DFG::SpeculativeJIT::compileArraySlice): |
| (JSC::DFG::SpeculativeJIT::compileAllocatePropertyStorage): |
| (JSC::DFG::SpeculativeJIT::compileReallocatePropertyStorage): |
| (JSC::DFG::SpeculativeJIT::compileNewTypedArrayWithSize): |
| * dfg/DFGSpeculativeJIT.h: |
| (JSC::DFG::SpeculativeJIT::TrustedImmPtr::TrustedImmPtr): |
| * dfg/DFGSpeculativeJIT32_64.cpp: |
| (JSC::DFG::SpeculativeJIT::compile): |
| (JSC::DFG::SpeculativeJIT::compileAllocateNewArrayWithSize): |
| * dfg/DFGSpeculativeJIT64.cpp: |
| (JSC::DFG::SpeculativeJIT::emitCall): |
| (JSC::DFG::SpeculativeJIT::compile): |
| (JSC::DFG::SpeculativeJIT::compileAllocateNewArrayWithSize): |
| * dfg/DFGThunks.cpp: |
| (JSC::DFG::osrExitGenerationThunkGenerator): |
| * ftl/FTLLowerDFGToB3.cpp: |
| (JSC::FTL::DFG::LowerDFGToB3::compileCallOrConstruct): |
| (JSC::FTL::DFG::LowerDFGToB3::compileTailCall): |
| (JSC::FTL::DFG::LowerDFGToB3::compileCallOrConstructVarargs): |
| * ftl/FTLThunks.cpp: |
| (JSC::FTL::genericGenerationThunkGenerator): |
| * jit/AssemblyHelpers.cpp: |
| (JSC::AssemblyHelpers::debugCall): |
| (JSC::AssemblyHelpers::sanitizeStackInline): |
| * jit/IntrinsicEmitter.cpp: |
| (JSC::IntrinsicGetterAccessCase::emitIntrinsicGetter): |
| * jit/JITCall.cpp: |
| (JSC::JIT::compileOpCall): |
| * jit/JITCall32_64.cpp: |
| (JSC::JIT::compileOpCall): |
| * jit/ScratchRegisterAllocator.cpp: |
| (JSC::ScratchRegisterAllocator::restoreUsedRegistersFromScratchBufferForCall): |
| * wasm/js/WasmToJS.cpp: |
| (JSC::Wasm::wasmToJS): |
| * yarr/YarrJIT.cpp: |
| (JSC::Yarr::YarrGenerator::initParenContextFreeList): |
| (JSC::Yarr::YarrGenerator::storeToFrameWithPatch): |
| (JSC::Yarr::YarrGenerator::generate): |
| |
| 2018-02-26 Mark Lam <mark.lam@apple.com> |
| |
| Modernize FINALIZE_CODE and peer macros to use __VA_ARGS__ arguments. |
| https://bugs.webkit.org/show_bug.cgi?id=183159 |
| <rdar://problem/37930837> |
| |
| Reviewed by Keith Miller. |
| |
| * assembler/LinkBuffer.h: |
| * assembler/testmasm.cpp: |
| (JSC::compile): |
| * b3/B3Compile.cpp: |
| (JSC::B3::compile): |
| * b3/air/testair.cpp: |
| * b3/testb3.cpp: |
| (JSC::B3::testEntrySwitchSimple): |
| (JSC::B3::testEntrySwitchNoEntrySwitch): |
| (JSC::B3::testEntrySwitchWithCommonPaths): |
| (JSC::B3::testEntrySwitchWithCommonPathsAndNonTrivialEntrypoint): |
| (JSC::B3::testEntrySwitchLoop): |
| * bytecode/InlineAccess.cpp: |
| (JSC::linkCodeInline): |
| (JSC::InlineAccess::rewireStubAsJump): |
| * bytecode/PolymorphicAccess.cpp: |
| (JSC::PolymorphicAccess::regenerate): |
| * dfg/DFGJITFinalizer.cpp: |
| (JSC::DFG::JITFinalizer::finalize): |
| (JSC::DFG::JITFinalizer::finalizeFunction): |
| * dfg/DFGOSRExit.cpp: |
| (JSC::DFG::OSRExit::compileOSRExit): |
| * dfg/DFGThunks.cpp: |
| (JSC::DFG::osrExitThunkGenerator): |
| (JSC::DFG::osrExitGenerationThunkGenerator): |
| (JSC::DFG::osrEntryThunkGenerator): |
| * ftl/FTLJITFinalizer.cpp: |
| (JSC::FTL::JITFinalizer::finalizeCommon): |
| * ftl/FTLLazySlowPath.cpp: |
| (JSC::FTL::LazySlowPath::generate): |
| * ftl/FTLOSRExitCompiler.cpp: |
| (JSC::FTL::compileStub): |
| * ftl/FTLThunks.cpp: |
| (JSC::FTL::genericGenerationThunkGenerator): |
| (JSC::FTL::slowPathCallThunkGenerator): |
| * jit/ExecutableAllocator.cpp: |
| * jit/JIT.cpp: |
| (JSC::JIT::link): |
| * jit/JITMathIC.h: |
| (JSC::isProfileEmpty): |
| * jit/JITOpcodes.cpp: |
| (JSC::JIT::privateCompileHasIndexedProperty): |
| * jit/JITOpcodes32_64.cpp: |
| (JSC::JIT::privateCompileHasIndexedProperty): |
| * jit/JITPropertyAccess.cpp: |
| (JSC::JIT::stringGetByValStubGenerator): |
| (JSC::JIT::privateCompileGetByVal): |
| (JSC::JIT::privateCompileGetByValWithCachedId): |
| (JSC::JIT::privateCompilePutByVal): |
| (JSC::JIT::privateCompilePutByValWithCachedId): |
| * jit/JITPropertyAccess32_64.cpp: |
| (JSC::JIT::stringGetByValStubGenerator): |
| * jit/JITStubRoutine.h: |
| * jit/Repatch.cpp: |
| (JSC::linkPolymorphicCall): |
| * jit/SpecializedThunkJIT.h: |
| (JSC::SpecializedThunkJIT::finalize): |
| * jit/ThunkGenerators.cpp: |
| (JSC::throwExceptionFromCallSlowPathGenerator): |
| (JSC::linkCallThunkGenerator): |
| (JSC::linkPolymorphicCallThunkGenerator): |
| (JSC::virtualThunkFor): |
| (JSC::nativeForGenerator): |
| (JSC::arityFixupGenerator): |
| (JSC::unreachableGenerator): |
| (JSC::boundThisNoArgsFunctionCallGenerator): |
| * llint/LLIntThunks.cpp: |
| (JSC::LLInt::generateThunkWithJumpTo): |
| * wasm/WasmBBQPlan.cpp: |
| (JSC::Wasm::BBQPlan::complete): |
| * wasm/WasmBinding.cpp: |
| (JSC::Wasm::wasmToWasm): |
| * wasm/WasmOMGPlan.cpp: |
| (JSC::Wasm::OMGPlan::work): |
| * wasm/WasmThunks.cpp: |
| (JSC::Wasm::throwExceptionFromWasmThunkGenerator): |
| (JSC::Wasm::throwStackOverflowFromWasmThunkGenerator): |
| (JSC::Wasm::triggerOMGTierUpThunkGenerator): |
| * wasm/js/WasmToJS.cpp: |
| (JSC::Wasm::handleBadI64Use): |
| (JSC::Wasm::wasmToJS): |
| * yarr/YarrJIT.cpp: |
| (JSC::Yarr::YarrGenerator::compile): |
| |
| 2018-02-25 Yusuke Suzuki <utatane.tea@gmail.com> |
| |
| [FTL] Support PutByVal(ArrayStorage/SlowPutArrayStorage) |
| https://bugs.webkit.org/show_bug.cgi?id=182965 |
| |
| Reviewed by Saam Barati. |
| |
| This patch extends FTL coverage for PutByVal by adding ArrayStorage and SlwoPutArrayStorage support. |
| Basically large part of the patch is porting from DFG code. Since PutByVal already emits CheckInBounds |
| for InBounds case, we do not have OutOfBounds check for that case. |
| This is the last change for FTL to support all the types of DFG nodes except for CreateThis. |
| |
| * dfg/DFGOperations.cpp: |
| * dfg/DFGOperations.h: |
| * dfg/DFGSpeculativeJIT.cpp: |
| (JSC::DFG::SpeculativeJIT::compileDoublePutByVal): |
| * dfg/DFGSpeculativeJIT64.cpp: |
| (JSC::DFG::SpeculativeJIT::compile): |
| * ftl/FTLCapabilities.cpp: |
| (JSC::FTL::canCompile): |
| * ftl/FTLLowerDFGToB3.cpp: |
| (JSC::FTL::DFG::LowerDFGToB3::compilePutByVal): |
| (JSC::FTL::DFG::LowerDFGToB3::contiguousPutByValOutOfBounds): |
| For consistency, we use operationPutByValXXX and operationPutByValDirectXXX. |
| But except for SlowPutArrayStorage case, basically it is meaningless since |
| we do not have indexed accessors. |
| |
| 2018-02-26 Saam Barati <sbarati@apple.com> |
| |
| validateStackAccess should not validate if the offset is within the stack bounds |
| https://bugs.webkit.org/show_bug.cgi?id=183067 |
| <rdar://problem/37749988> |
| |
| Reviewed by Mark Lam. |
| |
| The validation rule was saying that any load from the stack must be |
| within the stack bounds of the frame. However, it's natural for a user |
| of B3 to emit code that may be outside of B3's stack bounds, but guard |
| such a load with a branch. The FTL does exactly this with GetMyArgumentByVal. |
| B3 is wrong to assert that this is a static property about all stack loads. |
| |
| * b3/B3Validate.cpp: |
| |
| 2018-02-23 Saam Barati <sbarati@apple.com> |
| |
| Make Number.isInteger an intrinsic |
| https://bugs.webkit.org/show_bug.cgi?id=183088 |
| |
| Reviewed by JF Bastien. |
| |
| When profiling the ML subtest in ARES, I noticed it was spending some |
| time in Number.isInteger. This patch makes that operation an intrinsic |
| in the DFG/FTL. It might be a speedup by 1% or so on that subtest, but |
| it's likely not an aggregate speedup on ARES. However, it is definitely |
| faster than calling into a builtin function, so we might as well have |
| it as an intrinsic. |
| |
| * dfg/DFGAbstractInterpreterInlines.h: |
| (JSC::DFG::AbstractInterpreter<AbstractStateType>::executeEffects): |
| * dfg/DFGByteCodeParser.cpp: |
| (JSC::DFG::ByteCodeParser::handleIntrinsicCall): |
| * dfg/DFGClobberize.h: |
| (JSC::DFG::clobberize): |
| * dfg/DFGDoesGC.cpp: |
| (JSC::DFG::doesGC): |
| * dfg/DFGFixupPhase.cpp: |
| (JSC::DFG::FixupPhase::fixupNode): |
| * dfg/DFGNodeType.h: |
| * dfg/DFGOperations.cpp: |
| * dfg/DFGOperations.h: |
| * dfg/DFGPredictionPropagationPhase.cpp: |
| * dfg/DFGSafeToExecute.h: |
| (JSC::DFG::safeToExecute): |
| * dfg/DFGSpeculativeJIT32_64.cpp: |
| (JSC::DFG::SpeculativeJIT::compile): |
| * dfg/DFGSpeculativeJIT64.cpp: |
| (JSC::DFG::SpeculativeJIT::compile): |
| * ftl/FTLCapabilities.cpp: |
| (JSC::FTL::canCompile): |
| * ftl/FTLLowerDFGToB3.cpp: |
| (JSC::FTL::DFG::LowerDFGToB3::compileNode): |
| (JSC::FTL::DFG::LowerDFGToB3::compileNumberIsInteger): |
| (JSC::FTL::DFG::LowerDFGToB3::unboxDouble): |
| * runtime/Intrinsic.cpp: |
| (JSC::intrinsicName): |
| * runtime/Intrinsic.h: |
| * runtime/NumberConstructor.cpp: |
| (JSC::NumberConstructor::finishCreation): |
| (JSC::numberConstructorFuncIsInteger): |
| * runtime/NumberConstructor.h: |
| (JSC::NumberConstructor::isIntegerImpl): |
| |
| 2018-02-23 Oleksandr Skachkov <gskachkov@gmail.com> |
| |
| WebAssembly: cache memory address / size on instance |
| https://bugs.webkit.org/show_bug.cgi?id=177305 |
| |
| Reviewed by JF Bastien. |
| |
| Cache memory address/size in wasm:Instance to avoid load wasm:Memory |
| object during access to memory and memory size property in JiT |
| |
| * wasm/WasmB3IRGenerator.cpp: |
| (JSC::Wasm::B3IRGenerator::restoreWebAssemblyGlobalState): |
| (JSC::Wasm::B3IRGenerator::addCurrentMemory): |
| (JSC::Wasm::B3IRGenerator::addCallIndirect): |
| * wasm/WasmBinding.cpp: |
| (JSC::Wasm::wasmToWasm): |
| * wasm/WasmInstance.h: |
| (JSC::Wasm::Instance::cachedMemory const): |
| (JSC::Wasm::Instance::cachedMemorySize const): |
| (JSC::Wasm::Instance::createWeakPtr): |
| (JSC::Wasm::Instance::setMemory): |
| (JSC::Wasm::Instance::updateCachedMemory): |
| (JSC::Wasm::Instance::offsetOfCachedMemory): |
| (JSC::Wasm::Instance::offsetOfCachedMemorySize): |
| (JSC::Wasm::Instance::offsetOfCachedIndexingMask): |
| (JSC::Wasm::Instance::allocationSize): |
| * wasm/WasmMemory.cpp: |
| (JSC::Wasm::Memory::grow): |
| (JSC::Wasm::Memory::registerInstance): |
| * wasm/WasmMemory.h: |
| (JSC::Wasm::Memory::indexingMask): |
| * wasm/js/JSToWasm.cpp: |
| (JSC::Wasm::createJSToWasmWrapper): |
| * wasm/js/WebAssemblyModuleRecord.cpp: |
| (JSC::WebAssemblyModuleRecord::evaluate): |
| |
| 2018-02-23 Saam Barati <sbarati@apple.com> |
| |
| ArgumentsEliminationPhase has a branch on GetByOffset that should be an assert |
| https://bugs.webkit.org/show_bug.cgi?id=182982 |
| |
| Reviewed by Yusuke Suzuki. |
| |
| I don't know why this check was not always an assert. When we see |
| a GetByOffset on an eliminated allocation, that allocation *must* |
| be a PhantomClonedArguments. If it weren't, the GetByOffset would |
| have escaped it. Because this transformation happens by visiting |
| blocks in pre-order, and by visiting nodes in a block starting from |
| index zero to index block->size() - 1, we're guaranteed that eliminated |
| allocations get transformed before users of it, since we visit nodes |
| in dominator order. |
| |
| * dfg/DFGArgumentsEliminationPhase.cpp: |
| |
| 2018-02-23 Yusuke Suzuki <utatane.tea@gmail.com> |
| |
| [JSC] Implement $vm.ftlTrue function for FTL testing |
| https://bugs.webkit.org/show_bug.cgi?id=183071 |
| |
| Reviewed by Mark Lam. |
| |
| Add $vm.ftlTrue, which becomes true if the caller is compiled in FTL. |
| This is useful for testing whether the caller function is compiled in FTL. |
| |
| We also remove duplicate DFGTrue function in jsc.cpp. We have $vm.dfgTrue. |
| |
| * dfg/DFGByteCodeParser.cpp: |
| (JSC::DFG::ByteCodeParser::handleIntrinsicCall): |
| * jsc.cpp: |
| (GlobalObject::finishCreation): |
| (functionFalse1): |
| (functionFalse2): Deleted. |
| * runtime/Intrinsic.cpp: |
| (JSC::intrinsicName): |
| * runtime/Intrinsic.h: |
| * tools/JSDollarVM.cpp: |
| (JSC::functionFTLTrue): |
| (JSC::JSDollarVM::finishCreation): |
| |
| 2018-02-22 Yusuke Suzuki <utatane.tea@gmail.com> |
| |
| [FTL] Support HasIndexedProperty for ArrayStorage and SlowPutArrayStorage |
| https://bugs.webkit.org/show_bug.cgi?id=182792 |
| |
| Reviewed by Mark Lam. |
| |
| This patch adds HasIndexedProperty for ArrayStorage and SlowPutArrayStorage in FTL. |
| HasIndexedProperty with ArrayStorage frequently causes FTL compilation failures |
| in web-tooling-benchmarks. |
| |
| * ftl/FTLCapabilities.cpp: |
| (JSC::FTL::canCompile): |
| * ftl/FTLLowerDFGToB3.cpp: |
| (JSC::FTL::DFG::LowerDFGToB3::compileHasIndexedProperty): |
| |
| 2018-02-22 Mark Lam <mark.lam@apple.com> |
| |
| Refactor MacroAssembler code to improve reuse and extensibility. |
| https://bugs.webkit.org/show_bug.cgi?id=183054 |
| <rdar://problem/37797337> |
| |
| Reviewed by Saam Barati. |
| |
| * assembler/ARM64Assembler.h: |
| * assembler/MacroAssembler.cpp: |
| * assembler/MacroAssembler.h: |
| * assembler/MacroAssemblerARM.h: |
| * assembler/MacroAssemblerARM64.h: |
| (JSC::MacroAssemblerARM64::canCompact): |
| (JSC::MacroAssemblerARM64::computeJumpType): |
| (JSC::MacroAssemblerARM64::jumpSizeDelta): |
| (JSC::MacroAssemblerARM64::link): |
| (JSC::MacroAssemblerARM64::load64): |
| (JSC::MacroAssemblerARM64::load64WithAddressOffsetPatch): |
| (JSC::MacroAssemblerARM64::load32): |
| (JSC::MacroAssemblerARM64::load32WithAddressOffsetPatch): |
| (JSC::MacroAssemblerARM64::load16): |
| (JSC::MacroAssemblerARM64::load16SignedExtendTo32): |
| (JSC::MacroAssemblerARM64::load8): |
| (JSC::MacroAssemblerARM64::load8SignedExtendTo32): |
| (JSC::MacroAssemblerARM64::store64): |
| (JSC::MacroAssemblerARM64::store64WithAddressOffsetPatch): |
| (JSC::MacroAssemblerARM64::store32): |
| (JSC::MacroAssemblerARM64::store32WithAddressOffsetPatch): |
| (JSC::MacroAssemblerARM64::store16): |
| (JSC::MacroAssemblerARM64::store8): |
| (JSC::MacroAssemblerARM64::getEffectiveAddress): |
| (JSC::MacroAssemblerARM64::branchDoubleNonZero): |
| (JSC::MacroAssemblerARM64::branchDoubleZeroOrNaN): |
| (JSC::MacroAssemblerARM64::branchTruncateDoubleToInt32): |
| (JSC::MacroAssemblerARM64::loadDouble): |
| (JSC::MacroAssemblerARM64::loadFloat): |
| (JSC::MacroAssemblerARM64::moveConditionallyAfterFloatingPointCompare): |
| (JSC::MacroAssemblerARM64::moveDoubleConditionallyAfterFloatingPointCompare): |
| (JSC::MacroAssemblerARM64::storeDouble): |
| (JSC::MacroAssemblerARM64::storeFloat): |
| (JSC::MacroAssemblerARM64::call): |
| (JSC::MacroAssemblerARM64::jump): |
| (JSC::MacroAssemblerARM64::tailRecursiveCall): |
| (JSC::MacroAssemblerARM64::setCarry): |
| (JSC::MacroAssemblerARM64::reemitInitialMoveWithPatch): |
| (JSC::MacroAssemblerARM64::isBreakpoint): |
| (JSC::MacroAssemblerARM64::invert): |
| (JSC::MacroAssemblerARM64::readCallTarget): |
| (JSC::MacroAssemblerARM64::replaceWithVMHalt): |
| (JSC::MacroAssemblerARM64::replaceWithJump): |
| (JSC::MacroAssemblerARM64::maxJumpReplacementSize): |
| (JSC::MacroAssemblerARM64::patchableJumpSize): |
| (JSC::MacroAssemblerARM64::repatchCall): |
| (JSC::MacroAssemblerARM64::makeBranch): |
| (JSC::MacroAssemblerARM64::makeCompareAndBranch): |
| (JSC::MacroAssemblerARM64::makeTestBitAndBranch): |
| (JSC::MacroAssemblerARM64::ARM64Condition): |
| (JSC::MacroAssemblerARM64::moveWithFixedWidth): |
| (JSC::MacroAssemblerARM64::load): |
| (JSC::MacroAssemblerARM64::store): |
| (JSC::MacroAssemblerARM64::tryLoadWithOffset): |
| (JSC::MacroAssemblerARM64::tryLoadSignedWithOffset): |
| (JSC::MacroAssemblerARM64::tryStoreWithOffset): |
| (JSC::MacroAssemblerARM64::jumpAfterFloatingPointCompare): |
| (JSC::MacroAssemblerARM64::linkCall): |
| * assembler/MacroAssemblerARMv7.h: |
| * assembler/MacroAssemblerMIPS.h: |
| * assembler/MacroAssemblerX86Common.h: |
| * assembler/ProbeStack.h: |
| - Removed a forward declaration of an obsolete class. |
| |
| 2018-02-22 Yusuke Suzuki <utatane.tea@gmail.com> |
| |
| Remove sleep(double) and sleepMS(double) interfaces |
| https://bugs.webkit.org/show_bug.cgi?id=183038 |
| |
| Reviewed by Mark Lam. |
| |
| * bytecode/SuperSampler.cpp: |
| (JSC::initializeSuperSampler): |
| |
| 2018-02-21 Don Olmstead <don.olmstead@sony.com> |
| |
| [CMake] Split declaration of JSC headers into public and private |
| https://bugs.webkit.org/show_bug.cgi?id=182980 |
| |
| Reviewed by Michael Catanzaro. |
| |
| * CMakeLists.txt: |
| * PlatformGTK.cmake: |
| * PlatformMac.cmake: |
| * PlatformWPE.cmake: |
| * PlatformWin.cmake: |
| |
| 2018-02-20 Saam Barati <sbarati@apple.com> |
| |
| DFG::VarargsForwardingPhase should eliminate getting argument length |
| https://bugs.webkit.org/show_bug.cgi?id=182959 |
| |
| Reviewed by Keith Miller. |
| |
| This patch teaches the DFG VarargsForwardingPhase to not treat |
| length accesses on Cloned/Direct Arguments objects as escapes. |
| It teaches this phase to materialize the length in the same |
| way the ArgumentsEliminationPhase does. |
| |
| This is around a 0.5-1% speedup on ARES6 on my iMac. It speeds |
| up the ML subtest by 2-4%. |
| |
| This patch also extends compileGetArgumentCountIncludingThis to take |
| a parameter that is the inline call frame to load from (in the case |
| where the inline call frame is a varargs frame). This allows the |
| the emitCodeToGetArgumentsArrayLength helper function to just emit |
| a GetArgumentCountIncludingThis node instead of a GetLocal. If we |
| emitted a GetLocal, we'd need to rerun CPS rethreading. |
| |
| * dfg/DFGArgumentsEliminationPhase.cpp: |
| * dfg/DFGArgumentsUtilities.cpp: |
| (JSC::DFG::emitCodeToGetArgumentsArrayLength): |
| * dfg/DFGByteCodeParser.cpp: |
| (JSC::DFG::ByteCodeParser::getArgumentCount): |
| * dfg/DFGClobberize.h: |
| (JSC::DFG::clobberize): |
| * dfg/DFGNode.h: |
| (JSC::DFG::Node::argumentsInlineCallFrame): |
| * dfg/DFGSpeculativeJIT.cpp: |
| (JSC::DFG::SpeculativeJIT::compileGetArgumentCountIncludingThis): |
| * dfg/DFGVarargsForwardingPhase.cpp: |
| * ftl/FTLLowerDFGToB3.cpp: |
| (JSC::FTL::DFG::LowerDFGToB3::compileGetArgumentCountIncludingThis): |
| |
| 2018-02-14 Yusuke Suzuki <utatane.tea@gmail.com> |
| |
| [FTL] Support ArrayPush for ArrayStorage |
| https://bugs.webkit.org/show_bug.cgi?id=182782 |
| |
| Reviewed by Saam Barati. |
| |
| This patch adds support for ArrayPush(ArrayStorage). We just port ArrayPush(ArrayStorage) in DFG to FTL. |
| |
| * ftl/FTLAbstractHeapRepository.h: |
| * ftl/FTLCapabilities.cpp: |
| (JSC::FTL::canCompile): |
| * ftl/FTLLowerDFGToB3.cpp: |
| (JSC::FTL::DFG::LowerDFGToB3::compileArrayPush): |
| |
| 2018-02-14 Yusuke Suzuki <utatane.tea@gmail.com> |
| |
| [FTL] Support ArrayPop for ArrayStorage |
| https://bugs.webkit.org/show_bug.cgi?id=182783 |
| |
| Reviewed by Saam Barati. |
| |
| This patch adds ArrayPop(ArrayStorage) support to FTL. We port the implementation in DFG to FTL. |
| |
| * ftl/FTLAbstractHeapRepository.h: |
| * ftl/FTLCapabilities.cpp: |
| (JSC::FTL::canCompile): |
| * ftl/FTLLowerDFGToB3.cpp: |
| (JSC::FTL::DFG::LowerDFGToB3::compileArrayPop): |
| |
| 2018-02-14 Yusuke Suzuki <utatane.tea@gmail.com> |
| |
| [FTL] Add Arrayify for ArrayStorage and SlowPutArrayStorage |
| https://bugs.webkit.org/show_bug.cgi?id=182731 |
| |
| Reviewed by Saam Barati. |
| |
| This patch adds support for Arrayify(ArrayStorage/SlowPutArrayStorage) to FTL. |
| Due to ArrayifyToStructure and CheckArray changes, necessary changes for |
| supporting Arrayify in FTL are already done. Just allowing it in FTLCapabilities.cpp |
| is enough. |
| |
| We fix FTL's CheckArray logic. Previously, CheckArray(SlowPutArrayStorage) does not pass |
| ArrayStorage in FTL. But now it passes this as DFG does. Moreover, we fix DFG's CheckArray |
| where CheckArray(ArrayStorage+NonArray) can pass ArrayStorage+Array. |
| |
| * dfg/DFGSpeculativeJIT.cpp: |
| (JSC::DFG::SpeculativeJIT::silentFill): |
| (JSC::DFG::SpeculativeJIT::jumpSlowForUnwantedArrayMode): |
| * dfg/DFGSpeculativeJIT.h: |
| * ftl/FTLCapabilities.cpp: |
| (JSC::FTL::canCompile): |
| * ftl/FTLLowerDFGToB3.cpp: |
| (JSC::FTL::DFG::LowerDFGToB3::isArrayTypeForArrayify): |
| |
| 2018-02-19 Saam Barati <sbarati@apple.com> |
| |
| Don't use JSFunction's allocation profile when getting the prototype can be effectful |
| https://bugs.webkit.org/show_bug.cgi?id=182942 |
| <rdar://problem/37584764> |
| |
| Reviewed by Mark Lam. |
| |
| Prior to this patch, the create_this implementation assumed that anything |
| that is a JSFunction can use the object allocation profile and go down the |
| fast path to allocate the |this| object. Implied by this approach is that |
| accessing the 'prototype' property of the incoming function is not an |
| effectful operation. This is inherent to the ObjectAllocationProfile |
| data structure: it caches the prototype field. However, getting the |
| 'prototype' property might be an effectful operation, e.g, it could |
| be a getter. Many variants of functions in JS have the 'prototype' property |
| as non-configurable. However, some functions, like bound functions, do not |
| have the 'prototype' field with these attributes. |
| |
| This patch adds the notion of 'canUseAllocationProfile' to JSFunction |
| and threads it through so that we only go down the fast path and use |
| the allocation profile when the prototype property is non-configurable. |
| |
| * bytecompiler/NodesCodegen.cpp: |
| (JSC::ClassExprNode::emitBytecode): |
| * dfg/DFGOperations.cpp: |
| * runtime/CommonSlowPaths.cpp: |
| (JSC::SLOW_PATH_DECL): |
| * runtime/JSFunction.cpp: |
| (JSC::JSFunction::prototypeForConstruction): |
| (JSC::JSFunction::allocateAndInitializeRareData): |
| (JSC::JSFunction::initializeRareData): |
| (JSC::JSFunction::getOwnPropertySlot): |
| (JSC::JSFunction::canUseAllocationProfileNonInline): |
| * runtime/JSFunction.h: |
| (JSC::JSFunction::ensureRareDataAndAllocationProfile): |
| * runtime/JSFunctionInlines.h: |
| (JSC::JSFunction::canUseAllocationProfile): |
| |
| 2018-02-19 Saam Barati <sbarati@apple.com> |
| |
| Don't mark an array profile out of bounds for the cases where the DFG will convert the access to SaneChain |
| https://bugs.webkit.org/show_bug.cgi?id=182912 |
| <rdar://problem/37685083> |
| |
| Reviewed by Keith Miller. |
| |
| In the baseline JIT and LLInt, when we loading a hole from an original array, |
| with the array prototype chain being normal, we end up marking the ArrayProfile |
| for that GetByVal as out of bounds. However, the DFG knows exactly how to |
| optimize this case by returning undefined when loading from a hole. Currently, |
| it only does this for Contiguous arrays (and sometimes Double arrays). |
| This patch just makes sure to not mark the ArrayProfile as out of bounds |
| in this scenario for Contiguous arrays, since the DFG will always optimize |
| this case. |
| |
| However, we should extend this by profiling when a GetByVal loads a hole. By |
| doing so, we can optimize this for Int32, ArrayStorage, and maybe even Double |
| arrays. That work will happen in: |
| https://bugs.webkit.org/show_bug.cgi?id=182940 |
| |
| This patch is a 30-50% speedup on JetStream's hash-map test. This patch |
| speeds up JetStream by 1% when testing on my iMac. |
| |
| * dfg/DFGArrayMode.cpp: |
| (JSC::DFG::ArrayMode::refine const): |
| * dfg/DFGFixupPhase.cpp: |
| (JSC::DFG::FixupPhase::fixupNode): |
| * jit/JITOperations.cpp: |
| (JSC::getByVal): |
| (JSC::canAccessArgumentIndexQuickly): Deleted. |
| * llint/LLIntSlowPaths.cpp: |
| (JSC::LLInt::getByVal): |
| (JSC::LLInt::LLINT_SLOW_PATH_DECL): |
| * llint/LowLevelInterpreter32_64.asm: |
| * llint/LowLevelInterpreter64.asm: |
| * runtime/CommonSlowPaths.h: |
| (JSC::CommonSlowPaths::canAccessArgumentIndexQuickly): |
| |
| 2018-02-17 Filip Pizlo <fpizlo@apple.com> |
| |
| GetArrayMask should support constant folding |
| https://bugs.webkit.org/show_bug.cgi?id=182907 |
| |
| Reviewed by Saam Barati. |
| |
| Implement constant folding for GetArrayMask. This revealed a bug in tryGetFoldableView, where it was |
| ignoring the result of a jsDynamicCast<>(). This wasn't a bug before because it would have been |
| impossible for that function to get called with a non-null value if the value was not an array view, |
| due to type filtering in CheckArray, the fact that CheckArray had to dominate GetArrayLength, and |
| the fact that the other tryGetFoldableView overload made sure that the array mode was some typed |
| array. |
| |
| This isn't a measurable progression, but it does save a register in the codegen for typed array |
| accesses. Hopefully these improvements add up. |
| |
| * assembler/AssemblerBuffer.h: |
| * dfg/DFGAbstractInterpreterInlines.h: |
| (JSC::DFG::AbstractInterpreter<AbstractStateType>::executeEffects): |
| * dfg/DFGGraph.cpp: |
| (JSC::DFG::Graph::tryGetFoldableView): |
| |
| 2018-02-18 Dominik Inführ <dominik.infuehr@gmail.com> |
| |
| Offlineasm/MIPS: immediates need to be within 16-bit signed values |
| https://bugs.webkit.org/show_bug.cgi?id=182890 |
| |
| Reviewed by Michael Catanzaro. |
| |
| In Sequence.getModifiedListMIPS(), we allow immediate values within |
| the range -0xffff..0xffff for immediates (addresses and other |
| immediates), but then in Immediate.mipsOperand() and |
| Address.mipsOperand() we raise if immediate values are not within |
| -0x7fff..0x7fff. This is inconsistent, and broke compilation on mips |
| since r228552 made the VM structure bigger meaning we address values |
| with bigger offsets in llint. This change restricts the allowed range, |
| so that a separate load of the value is done for values outside of |
| that range. |
| |
| * offlineasm/mips.rb: |
| |
| 2018-02-17 Darin Adler <darin@apple.com> |
| |
| Web Inspector: get rid of remaining uses of OptOutput<T> |
| https://bugs.webkit.org/show_bug.cgi?id=180607 |
| |
| Reviewed by Brian Burg. |
| |
| * inspector/AsyncStackTrace.cpp: Removed explicit Inspector prefix from code that |
| is inside the Inspector namespace already. Also use auto a bit. |
| * inspector/AsyncStackTrace.h: Ditto. |
| * inspector/ConsoleMessage.cpp: Ditto. |
| |
| * inspector/ContentSearchUtilities.cpp: More Inspector namespace removal and ... |
| (Inspector::ContentSearchUtilities::getRegularExpressionMatchesByLines): Use a |
| Vector instead of a unique_ptr<Vector>. |
| (Inspector::ContentSearchUtilities::lineEndings): Ditto. |
| (Inspector::ContentSearchUtilities::stylesheetCommentPattern): Deleted. |
| (Inspector::ContentSearchUtilities::findMagicComment): Use std::array instead of |
| a Vector for a fixed size array; also got rid of reinterpret_cast. |
| (Inspector::ContentSearchUtilities::findStylesheetSourceMapURL): Moved the regular |
| expression here since it's the only place it was used. |
| |
| * inspector/ContentSearchUtilities.h: Cut down on unneeded includes. |
| |
| * inspector/InjectedScript.cpp: Removed explicit Inspector prefix from code that |
| is inside the Inspector namespace already. Also use auto a bit. |
| |
| * inspector/InspectorProtocolTypes.h: Removed OptOutput. Simplified assertions. |
| Removed base template for BindingTraits; we only need the specializations. |
| |
| * inspector/ScriptCallFrame.cpp: Removed explicit Inspector prefix from code that |
| is inside the Inspector namespace already. Also use auto a bit. |
| * inspector/ScriptCallFrame.h: Ditto. |
| * inspector/ScriptCallStack.cpp: Ditto. |
| * inspector/ScriptCallStack.h: Ditto. |
| * inspector/agents/InspectorConsoleAgent.cpp: Ditto. |
| * inspector/agents/InspectorConsoleAgent.h: Ditto. |
| |
| * inspector/agents/InspectorDebuggerAgent.cpp: More Inspector namespace removal and ... |
| (Inspector::InspectorDebuggerAgent::evaluateOnCallFrame): Use std::optional& intead of |
| OptOutput* for out arguments. |
| * inspector/agents/InspectorDebuggerAgent.h: Ditto. |
| |
| * inspector/agents/InspectorHeapAgent.cpp: More Inspector namespace removal and ... |
| (Inspector::InspectorHeapAgent::getPreview): Use std::optional& intead of OptOutput* |
| for out arguments. |
| * inspector/agents/InspectorHeapAgent.h: Ditto. |
| |
| * inspector/agents/InspectorRuntimeAgent.cpp: More Inspector namespace removal and ... |
| (Inspector::InspectorRuntimeAgent::parse): Use std::optional& intead of OptOutput* |
| for out arguments. |
| (Inspector::InspectorRuntimeAgent::evaluate): Ditto. |
| (Inspector::InspectorRuntimeAgent::callFunctionOn): Ditto. |
| (Inspector::InspectorRuntimeAgent::saveResult): Ditto. |
| * inspector/agents/InspectorRuntimeAgent.h: Ditto. |
| |
| * inspector/agents/InspectorScriptProfilerAgent.cpp: More Inspector namespace removal |
| and removed some bogus const. |
| * inspector/agents/InspectorScriptProfilerAgent.h: Ditto. |
| |
| * inspector/scripts/codegen/cpp_generator.py: |
| (CppGenerator.cpp_type_for_unchecked_formal_in_parameter): Removed some bogus const. |
| (CppGenerator.cpp_type_for_type_with_name): Ditto. |
| (CppGenerator.cpp_type_for_formal_out_parameter): Use std::optional& instead of |
| Inspector::Protocol::OptOutput*. |
| (CppGenerator.cpp_type_for_formal_async_parameter): Ditto. |
| (CppGenerator.cpp_type_for_stack_in_parameter): Ditto. |
| (CppGenerator.cpp_type_for_stack_out_parameter): Ditto. |
| |
| * inspector/scripts/codegen/cpp_generator_templates.py: Removed ASSERT_DISABLED |
| conditional around assertion code which will now compile to nothing if ASSERT is disabled. |
| Build strings more simply in a few cases. |
| |
| * inspector/scripts/codegen/generate_cpp_backend_dispatcher_implementation.py: |
| (CppBackendDispatcherImplementationGenerator._generate_async_dispatcher_class_for_domain): |
| Use has_value instead of isAssigned and * operator instead of getValue() since std::optional |
| replace OptOutput here. |
| (CppBackendDispatcherImplementationGenerator._generate_dispatcher_implementation_for_command): |
| Pass by reference instead of pointer now. |
| |
| * inspector/scripts/codegen/generate_cpp_protocol_types_header.py: |
| Removed ASSERT_DISABLED conditional around assertion code which will now compile to nothing |
| if ASSERT is disabled. |
| |
| * inspector/scripts/codegen/generate_cpp_protocol_types_implementation.py: |
| (CppProtocolTypesImplementationGenerator._generate_assertion_for_object_declaration): Generate |
| the assertion function unconditionally, but leave out the assertions if ASSERT_DISABLED is true. |
| (CppProtocolTypesImplementationGenerator): Use auto instead of writing out JSON::Object::iterator. |
| |
| * inspector/scripts/codegen/generate_objc_backend_dispatcher_implementation.py: |
| (ObjCBackendDispatcherImplementationGenerator._generate_conversions_for_command): Build strings |
| more simply. |
| |
| * inspector/scripts/tests/generic/expected/commands-with-async-attribute.json-result: |
| * inspector/scripts/tests/generic/expected/commands-with-optional-call-return-parameters.json-result: |
| * inspector/scripts/tests/generic/expected/events-with-optional-parameters.json-result: |
| * inspector/scripts/tests/generic/expected/type-requiring-runtime-casts.json-result: |
| Rebaselined. |
| |
| 2018-02-16 Matt Lewis <jlewis3@apple.com> |
| |
| Unreviewed, rolling out r228318. |
| |
| The patch that this attempted to fix was rolled out already. |
| |
| Reverted changeset: |
| |
| "Fix build on ARMv7 traditional JSCOnly bot after r228306" |
| https://bugs.webkit.org/show_bug.cgi?id=182563 |
| https://trac.webkit.org/changeset/228318 |
| |
| 2018-02-16 Filip Pizlo <fpizlo@apple.com> |
| |
| Unreviewed, roll out r228306 (custom memcpy/memset) because the bots say that it was not a |
| progression. |
| |
| * assembler/AssemblerBuffer.h: |
| (JSC::AssemblerBuffer::append): |
| * heap/LargeAllocation.cpp: |
| (JSC::LargeAllocation::tryCreate): |
| * heap/MarkedBlock.cpp: |
| (JSC::MarkedBlock::Handle::didAddToDirectory): |
| * runtime/ArrayBuffer.cpp: |
| (JSC::ArrayBufferContents::tryAllocate): |
| (JSC::ArrayBufferContents::copyTo): |
| (JSC::ArrayBuffer::createInternal): |
| * runtime/ArrayBufferView.h: |
| (JSC::ArrayBufferView::zeroRangeImpl): |
| * runtime/ArrayConventions.cpp: |
| (JSC::clearArrayMemset): |
| * runtime/ArrayConventions.h: |
| (JSC::clearArray): |
| * runtime/ArrayPrototype.cpp: |
| (JSC::arrayProtoPrivateFuncConcatMemcpy): |
| * runtime/ButterflyInlines.h: |
| (JSC::Butterfly::tryCreate): |
| (JSC::Butterfly::createOrGrowPropertyStorage): |
| (JSC::Butterfly::growArrayRight): |
| (JSC::Butterfly::resizeArray): |
| * runtime/GenericTypedArrayViewInlines.h: |
| (JSC::GenericTypedArrayView<Adaptor>::create): |
| * runtime/JSArray.cpp: |
| (JSC::JSArray::appendMemcpy): |
| (JSC::JSArray::fastSlice): |
| * runtime/JSArrayBufferView.cpp: |
| (JSC::JSArrayBufferView::ConstructionContext::ConstructionContext): |
| * runtime/JSGenericTypedArrayViewInlines.h: |
| (JSC::JSGenericTypedArrayView<Adaptor>::set): |
| * runtime/JSObject.cpp: |
| (JSC::JSObject::constructConvertedArrayStorageWithoutCopyingElements): |
| (JSC::JSObject::shiftButterflyAfterFlattening): |
| * runtime/PropertyTable.cpp: |
| (JSC::PropertyTable::PropertyTable): |
| |
| 2018-02-16 Saam Barati <sbarati@apple.com> |
| |
| Fix bugs from r228411 |
| https://bugs.webkit.org/show_bug.cgi?id=182851 |
| <rdar://problem/37577732> |
| |
| Reviewed by JF Bastien. |
| |
| There was a bug from r228411 where inside the constant folding phase, |
| we used an insertCheck method that didn't handle varargs. This would |
| lead to a crash. When thinking about the fix for that function, I realized |
| a made a couple of mistakes in r228411. One is probably a security bug, and |
| the other is a performance bug because it'll prevent CSE for certain flavors |
| of GetByVal nodes. Both blunders are similar in nature. |
| |
| In r228411, I added code in LICM that inserted a CheckVarargs node with children |
| of another varargs node. However, to construct this new node's children, |
| I just copied the AdjacencyList. This does a shallow copy. What we needed |
| was a deep copy. We needed to create a new vararg AdjacencyList that points |
| to edges that are deep copies of the original varargs children. This patch |
| fixes this goof in LICM. |
| |
| r228411 made it so that PureValue over a varargs node would just compare actual |
| AdjacencyLists structs. So, if you had two GetByVals that had equal santized |
| children, their actual AdjacencyList structs are *not* bitwise equal, since they'll |
| have different firstChild values. Instead, we need to do a deep compare of their |
| adjacency lists. This patch teaches PureValue how to do that. |
| |
| * dfg/DFGClobberize.h: |
| (JSC::DFG::clobberize): |
| * dfg/DFGConstantFoldingPhase.cpp: |
| (JSC::DFG::ConstantFoldingPhase::foldConstants): |
| * dfg/DFGGraph.h: |
| (JSC::DFG::Graph::copyVarargChildren): |
| * dfg/DFGInsertionSet.h: |
| (JSC::DFG::InsertionSet::insertCheck): |
| * dfg/DFGLICMPhase.cpp: |
| (JSC::DFG::LICMPhase::attemptHoist): |
| * dfg/DFGPureValue.cpp: |
| (JSC::DFG::PureValue::dump const): |
| * dfg/DFGPureValue.h: |
| (JSC::DFG::PureValue::PureValue): |
| (JSC::DFG::PureValue::op const): |
| (JSC::DFG::PureValue::hash const): |
| (JSC::DFG::PureValue::operator== const): |
| (JSC::DFG::PureValue::isVarargs const): |
| (JSC::DFG::PureValue::children const): Deleted. |
| * dfg/DFGStrengthReductionPhase.cpp: |
| (JSC::DFG::StrengthReductionPhase::handleNode): |
| (JSC::DFG::StrengthReductionPhase::convertToIdentityOverChild): |
| |
| 2018-02-16 Matt Lewis <jlewis3@apple.com> |
| |
| Unreviewed, rolling out r228546. |
| |
| This caused a consistent crash on all macOS WK2 platforms. |
| |
| Reverted changeset: |
| |
| "Web Inspector: get rid of remaining uses of OptOutput<T>" |
| https://bugs.webkit.org/show_bug.cgi?id=180607 |
| https://trac.webkit.org/changeset/228546 |
| |
| 2018-02-16 Fujii Hironori <Hironori.Fujii@sony.com> |
| |
| fast/frames/sandboxed-iframe-navigation-top-denied.html is crashing in Inspector::createScriptCallStackForConsole::Exec for GTK |
| https://bugs.webkit.org/show_bug.cgi?id=172952 |
| |
| Reviewed by Michael Catanzaro. |
| |
| Null dereference of VM::topCallFrame happens in |
| Inspector::createScriptCallStackForConsole if the ExecState has no |
| call frames. |
| |
| * inspector/ScriptCallStackFactory.cpp: |
| (Inspector::createScriptCallStack): Do null check of topCallFrame. |
| (Inspector::createScriptCallStackForConsole): Ditto. |
| |
| 2018-02-15 Filip Pizlo <fpizlo@apple.com> |
| |
| Objects that contain dangerous things should be allocated far away from objects that can do OOB |
| https://bugs.webkit.org/show_bug.cgi?id=182843 |
| |
| Reviewed by Saam Barati. |
| |
| To complete our object distancing plan, we need to put objects that can contain unpoisoned data |
| far away from objects that cannot. Objects referenceable from JSValues cannot contain |
| unpoisoned data, but auxiliary data can. This further divides auxiliary data that is meant for |
| storing mostly JSValues from data that is meant for storing anything. |
| |
| This is achieved by having three SecurityKinds that are used for MarkedBlock selection and |
| zeroing sort of the same way SecurityOriginToken already was. |
| |
| This change shouldn't make anything slower. If anything, it will be a small speed-up because it |
| removes some cases of MarkedBlock zeroing since we don't need to zero blocks used for two of |
| the SecurityKinds. |
| |
| * Sources.txt: |
| * bytecode/ObjectAllocationProfileInlines.h: |
| (JSC::ObjectAllocationProfile::initializeProfile): |
| * heap/BlockDirectory.cpp: |
| (JSC::BlockDirectory::addBlock): |
| * heap/BlockDirectory.h: |
| * heap/CellAttributes.cpp: |
| (JSC::CellAttributes::dump const): |
| * heap/CellAttributes.h: |
| (JSC::CellAttributes::CellAttributes): |
| * heap/LocalAllocator.cpp: |
| (JSC::LocalAllocator::allocateSlowCase): |
| (JSC::LocalAllocator::tryAllocateWithoutCollecting): |
| * heap/MarkedBlock.cpp: |
| (JSC::MarkedBlock::Handle::didAddToDirectory): |
| (JSC::MarkedBlock::Handle::associateWithOrigin): Deleted. |
| * heap/MarkedBlock.h: |
| * heap/SecurityKind.cpp: Added. |
| (WTF::printInternal): |
| * heap/SecurityKind.h: Added. |
| * runtime/JSCellInlines.h: |
| (JSC::JSCell::subspaceFor): |
| * runtime/JSDestructibleObjectHeapCellType.cpp: |
| (JSC::JSDestructibleObjectHeapCellType::JSDestructibleObjectHeapCellType): |
| * runtime/JSObject.h: |
| (JSC::JSObject::subspaceFor): |
| * runtime/JSSegmentedVariableObjectHeapCellType.cpp: |
| (JSC::JSSegmentedVariableObjectHeapCellType::JSSegmentedVariableObjectHeapCellType): |
| * runtime/JSStringHeapCellType.cpp: |
| (JSC::JSStringHeapCellType::JSStringHeapCellType): |
| * runtime/Symbol.h: |
| (JSC::Symbol::subspaceFor): |
| * runtime/VM.cpp: |
| (JSC::VM::VM): |
| * runtime/VM.h: |
| * wasm/js/JSWebAssemblyCodeBlockHeapCellType.cpp: |
| (JSC::JSWebAssemblyCodeBlockHeapCellType::JSWebAssemblyCodeBlockHeapCellType): |
| |
| 2018-02-15 Darin Adler <darin@apple.com> |
| |
| Web Inspector: get rid of remaining uses of OptOutput<T> |
| https://bugs.webkit.org/show_bug.cgi?id=180607 |
| |
| Reviewed by Brian Burg. |
| |
| * inspector/AsyncStackTrace.cpp: Removed explicit Inspector prefix from code that |
| is inside the Inspector namespace already. Also use auto a bit. |
| * inspector/AsyncStackTrace.h: Ditto. |
| * inspector/ConsoleMessage.cpp: Ditto. |
| |
| * inspector/ContentSearchUtilities.cpp: More Inspector namespace removal and ... |
| (Inspector::ContentSearchUtilities::getRegularExpressionMatchesByLines): Use a |
| Vector instead of a unique_ptr<Vector>. |
| (Inspector::ContentSearchUtilities::lineEndings): Ditto. |
| (Inspector::ContentSearchUtilities::stylesheetCommentPattern): Deleted. |
| (Inspector::ContentSearchUtilities::findMagicComment): Use std::array instead of |
| a Vector for a fixed size array; also got rid of reinterpret_cast. |
| (Inspector::ContentSearchUtilities::findStylesheetSourceMapURL): Moved the regular |
| expression here since it's the only place it was used. |
| |
| * inspector/ContentSearchUtilities.h: Cut down on unneeded includes. |
| |
| * inspector/InjectedScript.cpp: Removed explicit Inspector prefix from code that |
| is inside the Inspector namespace already. Also use auto a bit. |
| |
| * inspector/InspectorProtocolTypes.h: Removed OptOutput. Simplified assertions. |
| Removed base template for BindingTraits; we only need the specializations. |
| |
| * inspector/ScriptCallFrame.cpp: Removed explicit Inspector prefix from code that |
| is inside the Inspector namespace already. Also use auto a bit. |
| * inspector/ScriptCallFrame.h: Ditto. |
| * inspector/ScriptCallStack.cpp: Ditto. |
| * inspector/ScriptCallStack.h: Ditto. |
| * inspector/agents/InspectorConsoleAgent.cpp: Ditto. |
| * inspector/agents/InspectorConsoleAgent.h: Ditto. |
| |
| * inspector/agents/InspectorDebuggerAgent.cpp: More Inspector namespace removal and ... |
| (Inspector::InspectorDebuggerAgent::evaluateOnCallFrame): Use std::optional& intead of |
| OptOutput* for out arguments. |
| * inspector/agents/InspectorDebuggerAgent.h: Ditto. |
| |
| * inspector/agents/InspectorHeapAgent.cpp: More Inspector namespace removal and ... |
| (Inspector::InspectorHeapAgent::getPreview): Use std::optional& intead of OptOutput* |
| for out arguments. |
| * inspector/agents/InspectorHeapAgent.h: Ditto. |
| |
| * inspector/agents/InspectorRuntimeAgent.cpp: More Inspector namespace removal and ... |
| (Inspector::InspectorRuntimeAgent::parse): Use std::optional& intead of OptOutput* |
| for out arguments. |
| (Inspector::InspectorRuntimeAgent::evaluate): Ditto. |
| (Inspector::InspectorRuntimeAgent::callFunctionOn): Ditto. |
| (Inspector::InspectorRuntimeAgent::saveResult): Ditto. |
| * inspector/agents/InspectorRuntimeAgent.h: Ditto. |
| |
| * inspector/agents/InspectorScriptProfilerAgent.cpp: More Inspector namespace removal |
| and removed some bogus const. |
| * inspector/agents/InspectorScriptProfilerAgent.h: Ditto. |
| |
| * inspector/scripts/codegen/cpp_generator.py: |
| (CppGenerator.cpp_type_for_unchecked_formal_in_parameter): Removed some bogus const. |
| (CppGenerator.cpp_type_for_type_with_name): Ditto. |
| (CppGenerator.cpp_type_for_formal_out_parameter): Use std::optional& instead of |
| Inspector::Protocol::OptOutput*. |
| (CppGenerator.cpp_type_for_formal_async_parameter): Ditto. |
| (CppGenerator.cpp_type_for_stack_in_parameter): Ditto. |
| (CppGenerator.cpp_type_for_stack_out_parameter): Ditto. |
| |
| * inspector/scripts/codegen/cpp_generator_templates.py: Removed ASSERT_DISABLED |
| conditional around assertion code which will now compile to nothing if ASSERT is disabled. |
| Build strings more simply in a few cases. |
| |
| * inspector/scripts/codegen/generate_cpp_backend_dispatcher_implementation.py: |
| (CppBackendDispatcherImplementationGenerator._generate_async_dispatcher_class_for_domain): |
| Use has_value instead of isAssigned and * operator instead of getValue() since std::optional |
| replace OptOutput here. |
| (CppBackendDispatcherImplementationGenerator._generate_dispatcher_implementation_for_command): |
| Pass by reference instead of pointer now. |
| |
| * inspector/scripts/codegen/generate_cpp_protocol_types_header.py: |
| Removed ASSERT_DISABLED conditional around assertion code which will now compile to nothing |
| if ASSERT is disabled. |
| |
| * inspector/scripts/codegen/generate_cpp_protocol_types_implementation.py: |
| (CppProtocolTypesImplementationGenerator._generate_assertion_for_object_declaration): Generate |
| the assertion function unconditionally, but leave out the assertions if ASSERT_DISABLED is true. |
| (CppProtocolTypesImplementationGenerator): Use auto instead of writing out JSON::Object::iterator. |
| |
| * inspector/scripts/codegen/generate_objc_backend_dispatcher_implementation.py: |
| (ObjCBackendDispatcherImplementationGenerator._generate_conversions_for_command): Build strings |
| more simply. |
| |
| * inspector/scripts/tests/generic/expected/commands-with-async-attribute.json-result: |
| * inspector/scripts/tests/generic/expected/commands-with-optional-call-return-parameters.json-result: |
| * inspector/scripts/tests/generic/expected/events-with-optional-parameters.json-result: |
| * inspector/scripts/tests/generic/expected/type-requiring-runtime-casts.json-result: |
| Rebaselined. |
| |
| 2018-02-15 Filip Pizlo <fpizlo@apple.com> |
| |
| Unreviewed, roll out r228366 since it did not progress anything. |
| |
| * heap/Heap.cpp: |
| (JSC::Heap::finalizeUnconditionalFinalizers): |
| * runtime/ErrorInstance.cpp: |
| (JSC::ErrorInstance::visitChildren): |
| (JSC::ErrorInstance::finalizeUnconditionally): Deleted. |
| * runtime/ErrorInstance.h: |
| (JSC::ErrorInstance::stackTrace): |
| (JSC::ErrorInstance::subspaceFor): Deleted. |
| * runtime/Exception.cpp: |
| (JSC::Exception::visitChildren): |
| (JSC::Exception::finalizeUnconditionally): Deleted. |
| * runtime/Exception.h: |
| * runtime/StackFrame.cpp: |
| (JSC::StackFrame::visitChildren): |
| (JSC::StackFrame::isFinalizationCandidate): Deleted. |
| (JSC::StackFrame::finalizeUnconditionally): Deleted. |
| * runtime/StackFrame.h: |
| * runtime/VM.cpp: |
| (JSC::VM::VM): |
| * runtime/VM.h: |
| |
| 2018-02-15 Yusuke Suzuki <utatane.tea@gmail.com> |
| |
| [JSC] Remove monotonicallyIncreasingTime and currentTime |
| https://bugs.webkit.org/show_bug.cgi?id=182793 |
| |
| Reviewed by Saam Barati. |
| |
| We would like to drop monotonicallyIncreasingTime and currentTime from our tree by |
| replacing them with MonotonicTime and WallTime, which are well-typed alternatives, |
| compared to double. |
| This patch removes monotonicallyIncreasingTime and currentTime in JSC. |
| |
| * b3/testb3.cpp: |
| (JSC::B3::testComplex): |
| * dfg/DFGPhase.h: |
| (JSC::DFG::runAndLog): |
| * dfg/DFGPlan.cpp: |
| (JSC::DFG::Plan::compileInThread): |
| (JSC::DFG::Plan::compileInThreadImpl): |
| * dfg/DFGPlan.h: |
| * dynbench.cpp: |
| (JSC::benchmarkImpl): |
| * heap/BlockDirectory.cpp: |
| (JSC::BlockDirectory::isPagedOut): |
| * heap/BlockDirectory.h: |
| * heap/FullGCActivityCallback.cpp: |
| (JSC::FullGCActivityCallback::doCollection): |
| * heap/Heap.cpp: |
| (JSC::Heap::isPagedOut): |
| (JSC::Heap::sweepSynchronously): |
| * heap/Heap.h: |
| * heap/MarkedSpace.cpp: |
| (JSC::MarkedSpace::isPagedOut): |
| * heap/MarkedSpace.h: |
| * inspector/agents/InspectorConsoleAgent.cpp: |
| (Inspector::InspectorConsoleAgent::startTiming): |
| (Inspector::InspectorConsoleAgent::stopTiming): |
| * inspector/agents/InspectorConsoleAgent.h: |
| * inspector/agents/InspectorRuntimeAgent.cpp: |
| (Inspector::InspectorRuntimeAgent::getRuntimeTypesForVariablesAtOffsets): |
| * jit/JIT.cpp: |
| (JSC::JIT::compileWithoutLinking): |
| (JSC::JIT::compileTimeStats): |
| * jit/JIT.h: |
| * jsc.cpp: |
| (StopWatch::start): |
| (StopWatch::stop): |
| (StopWatch::getElapsedMS): |
| (functionPreciseTime): |
| (runJSC): |
| * profiler/ProfilerDatabase.cpp: |
| (JSC::Profiler::Database::logEvent): |
| * profiler/ProfilerEvent.cpp: |
| (JSC::Profiler::Event::toJS const): |
| * profiler/ProfilerEvent.h: |
| (JSC::Profiler::Event::Event): |
| (JSC::Profiler::Event::time const): |
| * runtime/CodeCache.cpp: |
| (JSC::CodeCacheMap::pruneSlowCase): |
| * runtime/CodeCache.h: |
| (JSC::CodeCacheMap::CodeCacheMap): |
| (JSC::CodeCacheMap::prune): |
| * runtime/DateConstructor.cpp: |
| (JSC::callDate): |
| * runtime/TypeProfilerLog.cpp: |
| (JSC::TypeProfilerLog::processLogEntries): |
| * testRegExp.cpp: |
| (StopWatch::start): |
| (StopWatch::stop): |
| (StopWatch::getElapsedMS): |
| |
| 2018-02-14 Keith Miller <keith_miller@apple.com> |
| |
| We should be able to jsDynamicCast from JSType when possible |
| https://bugs.webkit.org/show_bug.cgi?id=182804 |
| |
| Reviewed by Filip Pizlo and Mark Lam. |
| |
| This patch beefs up jsDynamicCast in some of the cases where we |
| can use the JSType to quickly determine if a cell is a subclass of |
| the desired type. Since all JSCells have a range of JSTypes they support, |
| if there is a range exclusive to a class and all subclasses we can use |
| that range to quickly determine if the cast should be successful. |
| |
| Additionally, the JSValue versions of jsCast and jsDynamicCast now |
| call the JSCell version after checking the value is a cell. |
| |
| Finally, the casting functions have been moved to a new header, |
| JSCast.h |
| |
| * JavaScriptCore.xcodeproj/project.pbxproj: |
| * bytecode/CallVariant.h: |
| * bytecode/CodeBlock.h: |
| * bytecode/ExecutableToCodeBlockEdge.h: |
| * bytecode/TrackedReferences.h: |
| * bytecode/UnlinkedCodeBlock.h: |
| * bytecode/UnlinkedFunctionExecutable.h: |
| * dfg/DFGAbstractValue.h: |
| * dfg/DFGCommonData.h: |
| * dfg/DFGFrozenValue.h: |
| * dfg/DFGStructureAbstractValue.h: |
| * heap/CellContainerInlines.h: |
| * heap/ConservativeRoots.cpp: |
| * heap/GCLogging.cpp: |
| * heap/HeapInlines.h: |
| * heap/HeapSnapshotBuilder.cpp: |
| * heap/MarkedBlock.cpp: |
| * heap/MarkedBlockInlines.h: |
| * heap/SubspaceInlines.h: |
| * heap/WeakInlines.h: |
| * jit/JITOpcodes.cpp: |
| * jit/JITOpcodes32_64.cpp: |
| * llint/LLIntOffsetsExtractor.cpp: |
| * runtime/ArrayBufferNeuteringWatchpoint.h: |
| * runtime/BigIntPrototype.cpp: |
| * runtime/ClassInfo.h: |
| * runtime/CustomGetterSetter.h: |
| * runtime/FunctionRareData.h: |
| * runtime/GetterSetter.h: |
| * runtime/InferredType.h: |
| * runtime/InferredTypeTable.h: |
| * runtime/InferredValue.h: |
| * runtime/InternalFunction.cpp: |
| (JSC::InternalFunction::finishCreation): |
| * runtime/JSAPIValueWrapper.h: |
| * runtime/JSArray.h: |
| (JSC::JSArray::finishCreation): |
| * runtime/JSArrayBufferView.cpp: |
| (JSC::JSArrayBufferView::finishCreation): |
| * runtime/JSCast.h: Added. |
| (JSC::jsCast): |
| (JSC::JSCastingHelpers::jsDynamicCastGenericImpl): |
| (JSC::JSCastingHelpers::jsDynamicCastJSTypeImpl): |
| (JSC::JSCastingHelpers::JSDynamicCastTraits::cast): |
| (JSC::jsDynamicCast): |
| * runtime/JSCell.cpp: |
| * runtime/JSCell.h: |
| (JSC::jsCast): Deleted. |
| (JSC::jsDynamicCast): Deleted. |
| * runtime/JSCellInlines.h: |
| * runtime/JSFunction.cpp: |
| (JSC::JSFunction::finishCreation): |
| * runtime/JSJob.h: |
| * runtime/JSObject.h: |
| (JSC::JSObject::finishCreation): |
| * runtime/JSPromiseDeferred.h: |
| * runtime/JSPropertyNameEnumerator.h: |
| * runtime/NativeStdFunctionCell.h: |
| * runtime/ScopedArgumentsTable.h: |
| * runtime/SparseArrayValueMap.h: |
| * runtime/Structure.h: |
| * runtime/StructureChain.h: |
| * runtime/StructureRareData.h: |
| * tools/CellProfile.h: |
| * wasm/js/JSWebAssemblyCodeBlock.h: |
| |
| 2018-02-14 Michael Saboff <msaboff@apple.com> |
| |
| Crash: triggerOMGTierUpThunkGenerator() doesn't align the stack pointer before calling C++ code |
| https://bugs.webkit.org/show_bug.cgi?id=182808 |
| |
| Reviewed by Keith Miller. |
| |
| Set up a proper frame with a prologue and epilogue to align the stack pointer for the rest of the |
| thunk. |
| |
| * wasm/WasmThunks.cpp: |
| (JSC::Wasm::triggerOMGTierUpThunkGenerator): |
| |
| 2018-02-14 Saam Barati <sbarati@apple.com> |
| |
| Setting a VMTrap shouldn't look at topCallFrame since that may imply we're in C code and holding the malloc lock |
| https://bugs.webkit.org/show_bug.cgi?id=182801 |
| |
| Reviewed by Keith Miller. |
| |
| VMTraps would sometimes install traps when it paused the JS thread when it |
| was in C code. This is wrong, as installing traps mallocs, and the JS thread |
| may have been holding the malloc lock while in C code. This could lead to a |
| deadlock when C code was holding the malloc lock. |
| |
| This patch makes it so that we only install traps when we've proven the PC |
| is in JIT or LLInt code. If we're in JIT/LLInt code, we are guaranteed that |
| we're not holding the malloc lock. |
| |
| * jsc.cpp: |
| (GlobalObject::finishCreation): |
| (functionMallocInALoop): |
| * runtime/VMTraps.cpp: |
| (JSC::VMTraps::tryInstallTrapBreakpoints): |
| |
| 2018-02-14 Michael Saboff <msaboff@apple.com> |
| |
| REGRESSION(225695) : com.apple.WebKit.WebContent at com.apple.JavaScriptCore: JSC::RegExp::match + 630 :: stack overflow |
| https://bugs.webkit.org/show_bug.cgi?id=182705 |
| |
| Reviewed by Mark Lam. |
| |
| Moved the pattern context buffer used by YARR JIT'ed code from a stack local to a lazily allocated |
| buffer on the VM. Exposed when the buffer is needed to reduce likelihood that we'd allocated it. |
| Guarded use of the buffer with a lock since the DFG compiler may call into YARR JIT'ed code on a |
| compilation thread. |
| |
| * runtime/RegExpInlines.h: |
| (JSC::RegExp::matchInline): |
| * runtime/VM.cpp: |
| (JSC::VM::~VM): |
| (JSC::VM::acquireRegExpPatternContexBuffer): |
| (JSC::VM::releaseRegExpPatternContexBuffer): |
| * runtime/VM.h: |
| * yarr/YarrJIT.cpp: |
| (JSC::Yarr::YarrGenerator::generate): |
| (JSC::Yarr::YarrGenerator::backtrack): |
| (JSC::Yarr::YarrGenerator::opCompileParenthesesSubpattern): |
| (JSC::Yarr::YarrGenerator::generateEnter): |
| (JSC::Yarr::YarrGenerator::generateReturn): |
| (JSC::Yarr::YarrGenerator::YarrGenerator): |
| (JSC::Yarr::YarrGenerator::compile): |
| * yarr/YarrJIT.h: |
| (JSC::Yarr::YarrCodeBlock::usesPatternContextBuffer): |
| (JSC::Yarr::YarrCodeBlock::setUsesPaternContextBuffer): |
| |
| 2018-02-13 Saam Barati <sbarati@apple.com> |
| |
| putDirectIndexSlowOrBeyondVectorLength needs to convert to dictionary indexing mode always if attributes are present |
| https://bugs.webkit.org/show_bug.cgi?id=182755 |
| <rdar://problem/37080864> |
| |
| Reviewed by Keith Miller. |
| |
| putDirectIndexSlowOrBeyondVectorLength with non-zero attributes only converted |
| the object in question to a dictionary indexing mode when the index is less than |
| the vector length. This makes no sense. If we're defining a getter, setter, or read |
| only property, we must always enter the dictionary indexing mode irrespective |
| of the index in relation to the vector length. |
| |
| * runtime/JSObject.cpp: |
| (JSC::JSObject::putDirectIndexSlowOrBeyondVectorLength): |
| |
| 2018-02-13 Saam Barati <sbarati@apple.com> |
| |
| Follup fix to r228411 for 32-bit builds. I missed a place where we used non vararg getter for child2(). |
| |
| * dfg/DFGSpeculativeJIT32_64.cpp: |
| (JSC::DFG::SpeculativeJIT::compile): |
| |
| 2018-02-13 Guillaume Emont <guijemont@igalia.com> |
| |
| [YarrJIT][ARM] We need to save r8 as it is the initial start register |
| https://bugs.webkit.org/show_bug.cgi?id=182157 |
| |
| Reviewed by Saam Barati. |
| |
| Register r8 is the initial start register since r224172, so we need to |
| save it. We still need to save r6 as well even though it is not the |
| initial start register any more, since it is used by the |
| MacroAssembler which we use (we get crashes in some situations if we |
| don't save r6). This issue was discovered because |
| stress/regress-174044.js crashes on a raspberry pi 2 when compiled in |
| -O2. |
| |
| * yarr/YarrJIT.cpp: |
| (JSC::Yarr::YarrGenerator::generateEnter): |
| (JSC::Yarr::YarrGenerator::generateReturn): |
| |
| 2018-02-13 Caitlin Potter <caitp@igalia.com> |
| |
| [JSC] cache TaggedTemplate arrays by callsite rather than by contents |
| https://bugs.webkit.org/show_bug.cgi?id=182717 |
| |
| Reviewed by Yusuke Suzuki. |
| |
| https://github.com/tc39/ecma262/pull/890 imposes a change to template |
| literals, to allow template callsite arrays to be collected when the |
| code containing the tagged template call is collected. This spec change |
| has received concensus and been ratified. |
| |
| This change eliminates the eternal map associating template contents |
| with arrays. |
| |
| * CMakeLists.txt: |
| * JavaScriptCore.xcodeproj/project.pbxproj: |
| * Sources.txt: |
| * bytecode/CodeBlock.cpp: |
| (JSC::CodeBlock::setConstantRegisters): |
| * bytecode/DirectEvalCodeCache.cpp: |
| (JSC::DirectEvalCodeCache::setSlow): |
| * bytecode/UnlinkedCodeBlock.cpp: |
| (JSC::UnlinkedCodeBlock::UnlinkedCodeBlock): |
| * bytecode/UnlinkedCodeBlock.h: |
| (JSC::UnlinkedCodeBlock::allowDirectEvalCache const): |
| * bytecompiler/BytecodeGenerator.cpp: |
| (JSC::BytecodeGenerator::addTemplateObjectConstant): |
| (JSC::BytecodeGenerator::emitGetTemplateObject): |
| (JSC::BytecodeGenerator::addTemplateRegistryKeyConstant): Deleted. |
| * bytecompiler/BytecodeGenerator.h: |
| * parser/Parser.cpp: |
| (JSC::Parser<LexerType>::parseInner): |
| (JSC::Parser<LexerType>::parseMemberExpression): |
| * parser/Parser.h: |
| * parser/ParserModes.h: |
| * runtime/EvalExecutable.h: |
| (JSC::EvalExecutable::allowDirectEvalCache const): |
| * runtime/JSGlobalObject.cpp: |
| (JSC::JSGlobalObject::JSGlobalObject): |
| * runtime/JSGlobalObject.h: |
| (JSC::JSGlobalObject::templateRegistry): Deleted. |
| * runtime/JSTemplateObjectDescriptor.cpp: Renamed from Source/JavaScriptCore/runtime/TemplateRegistry.cpp. |
| (JSC::JSTemplateObjectDescriptor::JSTemplateObjectDescriptor): |
| (JSC::JSTemplateObjectDescriptor::create): |
| (JSC::JSTemplateObjectDescriptor::destroy): |
| (JSC::JSTemplateObjectDescriptor::createTemplateObject): |
| * runtime/JSTemplateObjectDescriptor.h: Renamed from Source/JavaScriptCore/runtime/JSTemplateRegistryKey.h. |
| (JSC::isTemplateObjectDescriptor): |
| * runtime/JSTemplateRegistryKey.cpp: Removed. |
| * runtime/TemplateObjectDescriptor.cpp: Renamed from Source/JavaScriptCore/runtime/TemplateRegistryKey.cpp. |
| (JSC::TemplateObjectDescriptor::~TemplateObjectDescriptor): |
| * runtime/TemplateObjectDescriptor.h: Renamed from Source/JavaScriptCore/runtime/TemplateRegistryKey.h. |
| (JSC::TemplateObjectDescriptor::operator== const): |
| (JSC::TemplateObjectDescriptor::operator!= const): |
| (JSC::TemplateObjectDescriptor::Hasher::hash): |
| (JSC::TemplateObjectDescriptor::Hasher::equal): |
| (JSC::TemplateObjectDescriptor::create): |
| (JSC::TemplateObjectDescriptor::TemplateObjectDescriptor): |
| (JSC::TemplateObjectDescriptor::calculateHash): |
| * runtime/TemplateRegistry.h: Removed. |
| * runtime/TemplateRegistryKeyTable.cpp: Removed. |
| * runtime/TemplateRegistryKeyTable.h: Removed. |
| * runtime/VM.cpp: |
| (JSC::VM::VM): |
| * runtime/VM.h: |
| (JSC::VM::templateRegistryKeyTable): Deleted. |
| * runtime/VMEntryScope.cpp: |
| |
| * CMakeLists.txt: |
| * JavaScriptCore.xcodeproj/project.pbxproj: |
| * Sources.txt: |
| * bytecode/CodeBlock.cpp: |
| (JSC::CodeBlock::setConstantRegisters): |
| * bytecode/DirectEvalCodeCache.cpp: |
| (JSC::DirectEvalCodeCache::setSlow): |
| * bytecode/UnlinkedCodeBlock.h: |
| (JSC::UnlinkedCodeBlock::allowDirectEvalCache const): |
| * bytecompiler/BytecodeGenerator.cpp: |
| (JSC::BytecodeGenerator::addTemplateObjectConstant): |
| (JSC::BytecodeGenerator::emitGetTemplateObject): |
| (JSC::BytecodeGenerator::addTemplateRegistryKeyConstant): Deleted. |
| * bytecompiler/BytecodeGenerator.h: |
| * parser/Parser.cpp: |
| (JSC::Parser<LexerType>::parseInner): |
| (JSC::Parser<LexerType>::parseMemberExpression): |
| * parser/Parser.h: |
| * parser/ParserModes.h: |
| * runtime/EvalExecutable.h: |
| (JSC::EvalExecutable::allowDirectEvalCache const): |
| * runtime/JSGlobalObject.cpp: |
| (JSC::JSGlobalObject::JSGlobalObject): |
| * runtime/JSGlobalObject.h: |
| (JSC::JSGlobalObject::templateRegistry): Deleted. |
| * runtime/JSTemplateObjectDescriptor.cpp: Renamed from Source/JavaScriptCore/runtime/TemplateRegistry.cpp. |
| (JSC::JSTemplateObjectDescriptor::JSTemplateObjectDescriptor): |
| (JSC::JSTemplateObjectDescriptor::create): |
| (JSC::JSTemplateObjectDescriptor::destroy): |
| (JSC::JSTemplateObjectDescriptor::createTemplateObject): |
| * runtime/JSTemplateObjectDescriptor.h: Renamed from Source/JavaScriptCore/runtime/JSTemplateRegistryKey.h. |
| (JSC::isTemplateObjectDescriptor): |
| * runtime/JSTemplateRegistryKey.cpp: Removed. |
| * runtime/TemplateObjectDescriptor.cpp: Renamed from Source/JavaScriptCore/runtime/TemplateRegistryKey.cpp. |
| (JSC::TemplateObjectDescriptor::~TemplateObjectDescriptor): |
| * runtime/TemplateObjectDescriptor.h: Renamed from Source/JavaScriptCore/runtime/TemplateRegistryKey.h. |
| (JSC::TemplateObjectDescriptor::operator== const): |
| (JSC::TemplateObjectDescriptor::operator!= const): |
| (JSC::TemplateObjectDescriptor::Hasher::hash): |
| (JSC::TemplateObjectDescriptor::Hasher::equal): |
| (JSC::TemplateObjectDescriptor::create): |
| (JSC::TemplateObjectDescriptor::TemplateObjectDescriptor): |
| (JSC::TemplateObjectDescriptor::calculateHash): |
| * runtime/TemplateRegistry.h: Removed. |
| * runtime/TemplateRegistryKeyTable.cpp: Removed. |
| * runtime/TemplateRegistryKeyTable.h: Removed. |
| * runtime/VM.cpp: |
| (JSC::VM::VM): |
| * runtime/VM.h: |
| (JSC::VM::templateRegistryKeyTable): Deleted. |
| * runtime/VMEntryScope.cpp: |
| |
| * CMakeLists.txt: |
| * JavaScriptCore.xcodeproj/project.pbxproj: |
| * Sources.txt: |
| * bytecode/CodeBlock.cpp: |
| (JSC::CodeBlock::setConstantRegisters): |
| * bytecode/DirectEvalCodeCache.cpp: |
| (JSC::DirectEvalCodeCache::setSlow): |
| * bytecode/UnlinkedCodeBlock.h: |
| (JSC::UnlinkedCodeBlock::allowDirectEvalCache const): |
| * bytecompiler/BytecodeGenerator.cpp: |
| (JSC::BytecodeGenerator::addTemplateObjectConstant): |
| (JSC::BytecodeGenerator::emitGetTemplateObject): |
| (JSC::BytecodeGenerator::addTemplateRegistryKeyConstant): Deleted. |
| * bytecompiler/BytecodeGenerator.h: |
| * parser/Parser.cpp: |
| (JSC::Parser<LexerType>::parseInner): |
| (JSC::Parser<LexerType>::parseMemberExpression): |
| * parser/Parser.h: |
| * parser/ParserModes.h: |
| * runtime/EvalExecutable.h: |
| (JSC::EvalExecutable::allowDirectEvalCache const): |
| * runtime/JSGlobalObject.cpp: |
| (JSC::JSGlobalObject::JSGlobalObject): |
| * runtime/JSGlobalObject.h: |
| (JSC::JSGlobalObject::templateRegistry): Deleted. |
| * runtime/JSTemplateObjectDescriptor.cpp: Renamed from Source/JavaScriptCore/runtime/TemplateRegistry.cpp. |
| (JSC::JSTemplateObjectDescriptor::JSTemplateObjectDescriptor): |
| (JSC::JSTemplateObjectDescriptor::create): |
| (JSC::JSTemplateObjectDescriptor::destroy): |
| (JSC::JSTemplateObjectDescriptor::createTemplateObject): |
| * runtime/JSTemplateObjectDescriptor.h: Renamed from Source/JavaScriptCore/runtime/JSTemplateRegistryKey.h. |
| (JSC::isTemplateObjectDescriptor): |
| * runtime/JSTemplateRegistryKey.cpp: Removed. |
| * runtime/TemplateObjectDescriptor.cpp: Renamed from Source/JavaScriptCore/runtime/TemplateRegistryKey.cpp. |
| (JSC::TemplateObjectDescriptor::~TemplateObjectDescriptor): |
| * runtime/TemplateObjectDescriptor.h: Renamed from Source/JavaScriptCore/runtime/TemplateRegistryKey.h. |
| (JSC::TemplateObjectDescriptor::operator== const): |
| (JSC::TemplateObjectDescriptor::operator!= const): |
| (JSC::TemplateObjectDescriptor::Hasher::hash): |
| (JSC::TemplateObjectDescriptor::Hasher::equal): |
| (JSC::TemplateObjectDescriptor::create): |
| (JSC::TemplateObjectDescriptor::TemplateObjectDescriptor): |
| (JSC::TemplateObjectDescriptor::calculateHash): |
| * runtime/TemplateRegistry.h: Removed. |
| * runtime/TemplateRegistryKeyTable.cpp: Removed. |
| * runtime/TemplateRegistryKeyTable.h: Removed. |
| * runtime/VM.cpp: |
| (JSC::VM::VM): |
| * runtime/VM.h: |
| (JSC::VM::templateRegistryKeyTable): Deleted. |
| * runtime/VMEntryScope.cpp: |
| |
| 2018-02-13 Yusuke Suzuki <utatane.tea@gmail.com> |
| |
| Support GetArrayLength on ArrayStorage in the FTL |
| https://bugs.webkit.org/show_bug.cgi?id=182625 |
| |
| Reviewed by Saam Barati. |
| |
| This patch adds GetArrayLength and CheckArray + ArrayStorage & SlowPutArrayStorage support for FTL. |
| The implementation is trivial; just porting one in DFG to FTL. |
| |
| This fixes several FTL compilation failures in web-tooling-benchmarks while we still need to support |
| ArrayPush, ArrayPop, Arrayify, and PutByVal. |
| |
| * dfg/DFGSpeculativeJIT.cpp: |
| (JSC::DFG::SpeculativeJIT::checkArray): |
| * ftl/FTLCapabilities.cpp: |
| (JSC::FTL::canCompile): |
| * ftl/FTLLowerDFGToB3.cpp: |
| (JSC::FTL::DFG::LowerDFGToB3::compileGetArrayLength): |
| (JSC::FTL::DFG::LowerDFGToB3::isArrayTypeForArrayify): |
| (JSC::FTL::DFG::LowerDFGToB3::isArrayTypeForCheckArray): |
| |
| 2018-02-10 Filip Pizlo <fpizlo@apple.com> |
| |
| Lock down JSFunction |
| https://bugs.webkit.org/show_bug.cgi?id=182652 |
| |
| Reviewed by Saam Barati. |
| |
| This poisons pointers in JSFunction and puts all of the types in the JSFunction hierarchy in |
| isospaces. |
| |
| This is so neutral on JetStream: 0.01% slower with p = 0.969211. |
| |
| * dfg/DFGSpeculativeJIT.cpp: |
| (JSC::DFG::SpeculativeJIT::compileNewFunctionCommon): |
| (JSC::DFG::SpeculativeJIT::compileNewFunction): |
| (JSC::DFG::SpeculativeJIT::compileCreateThis): |
| * dfg/DFGSpeculativeJIT.h: |
| (JSC::DFG::SpeculativeJIT::TrustedImmPtr::TrustedImmPtr): |
| (JSC::DFG::SpeculativeJIT::TrustedImmPtr::weakPointer): |
| (JSC::DFG::SpeculativeJIT::TrustedImmPtr::weakPoisonedPointer): |
| * dfg/DFGSpeculativeJIT64.cpp: |
| (JSC::DFG::SpeculativeJIT::compile): |
| * ftl/FTLLowerDFGToB3.cpp: |
| (JSC::FTL::DFG::LowerDFGToB3::compileGetExecutable): |
| (JSC::FTL::DFG::LowerDFGToB3::compileNewFunction): |
| (JSC::FTL::DFG::LowerDFGToB3::weakPointer): |
| (JSC::FTL::DFG::LowerDFGToB3::weakPoisonedPointer): |
| * ftl/FTLOutput.h: |
| (JSC::FTL::Output::weakPointer): |
| (JSC::FTL::Output::weakPoisonedPointer): |
| * heap/MarkedSpace.cpp: |
| * jit/JITOpcodes.cpp: |
| (JSC::JIT::emit_op_create_this): |
| * jit/ThunkGenerators.cpp: |
| (JSC::virtualThunkFor): |
| (JSC::nativeForGenerator): |
| (JSC::boundThisNoArgsFunctionCallGenerator): |
| * llint/LowLevelInterpreter.asm: |
| * llint/LowLevelInterpreter64.asm: |
| * runtime/JSAsyncFunction.h: |
| (JSC::JSAsyncFunction::subspaceFor): |
| * runtime/JSAsyncGeneratorFunction.h: |
| (JSC::JSAsyncGeneratorFunction::subspaceFor): |
| * runtime/JSBoundFunction.h: |
| (JSC::JSBoundFunction::subspaceFor): |
| * runtime/JSCPoison.h: |
| * runtime/JSCustomGetterSetterFunction.h: |
| (JSC::JSCustomGetterSetterFunction::subspaceFor): |
| * runtime/JSFunction.h: |
| (JSC::JSFunction::subspaceFor): |
| * runtime/JSGeneratorFunction.h: |
| (JSC::JSGeneratorFunction::subspaceFor): |
| * runtime/JSNativeStdFunction.h: |
| (JSC::JSNativeStdFunction::subspaceFor): |
| * runtime/VM.cpp: |
| (JSC::VM::VM): |
| * runtime/VM.h: |
| * wasm/js/WebAssemblyFunction.h: |
| * wasm/js/WebAssemblyWrapperFunction.h: |
| |
| 2018-02-12 Saam Barati <sbarati@apple.com> |
| |
| Add a GetIndexMask node and make it an input to GetByVal for array and typed array accesses in DFG SSA |
| https://bugs.webkit.org/show_bug.cgi?id=182633 |
| <rdar://problem/37441037> |
| |
| Reviewed by Keith Miller. |
| |
| This patch introduces a GetIndexMask node to DFG SSA. This is an input to |
| GetByVal for the GetByVal variants that do conservative index masking. |
| The reason I'm adding this node is I realized there were loads of |
| the butterfly index mask inside loops that B3 couldn't reason about |
| because B3 can't arbitrarily hoist loads out of loops if those loops |
| have side exits (because the side exit might be protecting the safety of the |
| load). However, for these loops I analyzed, the DFG would be able to hoist |
| these loads out of loops because it knows about JS semantics to correctly |
| reason about the safety of hoisting the load. |
| |
| This is a 1% speedup on JetStream on Mac and iOS in my testing. |
| |
| This patch also adds some infrastructure for eliminating and doing CSE on |
| varargs nodes. Because this patch makes GetByVal a varargs node, I ran into |
| issues we never had before. We never had a varargs node that could be CSEd or be |
| hoisted out of a loop until I made GetByVal varargs. To make it all work, |
| I added a CheckVarargs node. This is just like Check, but it's varargs. |
| |
| * dfg/DFGAbstractInterpreterInlines.h: |
| (JSC::DFG::AbstractInterpreter<AbstractStateType>::executeEffects): |
| * dfg/DFGAdjacencyList.h: |
| (JSC::DFG::AdjacencyList::AdjacencyList): |
| * dfg/DFGArgumentsEliminationPhase.cpp: |
| * dfg/DFGBackwardsPropagationPhase.cpp: |
| (JSC::DFG::BackwardsPropagationPhase::propagate): |
| * dfg/DFGBasicBlock.cpp: |
| (JSC::DFG::BasicBlock::replaceTerminal): |
| * dfg/DFGBasicBlock.h: |
| (JSC::DFG::BasicBlock::findTerminal const): |
| * dfg/DFGBasicBlockInlines.h: |
| (JSC::DFG::BasicBlock::replaceTerminal): |
| * dfg/DFGByteCodeParser.cpp: |
| (JSC::DFG::ByteCodeParser::parseBlock): |
| * dfg/DFGCFGSimplificationPhase.cpp: |
| (JSC::DFG::CFGSimplificationPhase::mergeBlocks): |
| * dfg/DFGCPSRethreadingPhase.cpp: |
| (JSC::DFG::CPSRethreadingPhase::canonicalizeGetLocalFor): |
| (JSC::DFG::CPSRethreadingPhase::canonicalizeFlushOrPhantomLocalFor): |
| * dfg/DFGCSEPhase.cpp: |
| * dfg/DFGCleanUpPhase.cpp: |
| (JSC::DFG::CleanUpPhase::run): |
| * dfg/DFGClobberize.h: |
| (JSC::DFG::clobberize): |
| * dfg/DFGConstantFoldingPhase.cpp: |
| (JSC::DFG::ConstantFoldingPhase::foldConstants): |
| (JSC::DFG::ConstantFoldingPhase::fixUpsilons): |
| * dfg/DFGDCEPhase.cpp: |
| (JSC::DFG::DCEPhase::run): |
| (JSC::DFG::DCEPhase::fixupBlock): |
| * dfg/DFGDoesGC.cpp: |
| (JSC::DFG::doesGC): |
| * dfg/DFGFixupPhase.cpp: |
| (JSC::DFG::FixupPhase::fixupNode): |
| (JSC::DFG::FixupPhase::fixupChecksInBlock): |
| * dfg/DFGHeapLocation.cpp: |
| (WTF::printInternal): |
| * dfg/DFGHeapLocation.h: |
| * dfg/DFGIntegerCheckCombiningPhase.cpp: |
| (JSC::DFG::IntegerCheckCombiningPhase::handleBlock): |
| * dfg/DFGIntegerRangeOptimizationPhase.cpp: |
| * dfg/DFGLICMPhase.cpp: |
| (JSC::DFG::LICMPhase::attemptHoist): |
| * dfg/DFGMayExit.cpp: |
| * dfg/DFGNode.cpp: |
| (JSC::DFG::Node::remove): |
| (JSC::DFG::Node::convertToIdentityOn): |
| * dfg/DFGNode.h: |
| (JSC::DFG::Node::replaceWith): |
| * dfg/DFGNodeType.h: |
| * dfg/DFGObjectAllocationSinkingPhase.cpp: |
| * dfg/DFGPredictionPropagationPhase.cpp: |
| * dfg/DFGPureValue.cpp: |
| (JSC::DFG::PureValue::dump const): |
| * dfg/DFGPureValue.h: |
| (JSC::DFG::PureValue::PureValue): |
| * dfg/DFGPutStackSinkingPhase.cpp: |
| * dfg/DFGSSAConversionPhase.cpp: |
| (JSC::DFG::SSAConversionPhase::run): |
| * dfg/DFGSSALoweringPhase.cpp: |
| (JSC::DFG::SSALoweringPhase::handleNode): |
| * dfg/DFGSafeToExecute.h: |
| (JSC::DFG::safeToExecute): |
| * dfg/DFGSpeculativeJIT.cpp: |
| (JSC::DFG::SpeculativeJIT::SpeculativeJIT): |
| (JSC::DFG::SpeculativeJIT::compileGetByValOnString): |
| (JSC::DFG::SpeculativeJIT::compileGetByValOnIntTypedArray): |
| (JSC::DFG::SpeculativeJIT::compileGetByValOnFloatTypedArray): |
| (JSC::DFG::SpeculativeJIT::compileGetByValForObjectWithString): |
| (JSC::DFG::SpeculativeJIT::compileGetByValForObjectWithSymbol): |
| (JSC::DFG::SpeculativeJIT::compileGetByValOnDirectArguments): |
| (JSC::DFG::SpeculativeJIT::compileGetByValOnScopedArguments): |
| * dfg/DFGSpeculativeJIT.h: |
| * dfg/DFGSpeculativeJIT32_64.cpp: |
| (JSC::DFG::SpeculativeJIT::compile): |
| * dfg/DFGSpeculativeJIT64.cpp: |
| (JSC::DFG::SpeculativeJIT::compile): |
| * dfg/DFGStoreBarrierClusteringPhase.cpp: |
| * dfg/DFGValidate.cpp: |
| * dfg/DFGVarargsForwardingPhase.cpp: |
| * ftl/FTLCapabilities.cpp: |
| (JSC::FTL::canCompile): |
| * ftl/FTLLowerDFGToB3.cpp: |
| (JSC::FTL::DFG::LowerDFGToB3::compileNode): |
| (JSC::FTL::DFG::LowerDFGToB3::compileGetArrayMask): |
| (JSC::FTL::DFG::LowerDFGToB3::compileGetByVal): |
| (JSC::FTL::DFG::LowerDFGToB3::compileStringCharAt): |
| (JSC::FTL::DFG::LowerDFGToB3::maskedIndex): |
| (JSC::FTL::DFG::LowerDFGToB3::pointerIntoTypedArray): |
| |
| 2018-02-12 Mark Lam <mark.lam@apple.com> |
| |
| Miscellaneous refactoring of offlineasm. |
| https://bugs.webkit.org/show_bug.cgi?id=182702 |
| <rdar://problem/37467887> |
| |
| Reviewed by Filip Pizlo. |
| |
| 1. Refactor out the emission of $asm.comment, $asm.codeOrigin, $asm.annotation, |
| and $asm.debugAnnotation into a recordMetaData method. This standardizes how |
| we emit this metadata and makes all backends do it the same way. |
| |
| 2. Add the ability to include custom offlineasm scripts from WebKitAdditions in |
| the future. |
| |
| * offlineasm/arm.rb: |
| * offlineasm/arm64.rb: |
| * offlineasm/ast.rb: |
| * offlineasm/backends.rb: |
| * offlineasm/cloop.rb: |
| * offlineasm/config.rb: |
| * offlineasm/mips.rb: |
| * offlineasm/risc.rb: |
| * offlineasm/x86.rb: |
| |
| 2018-02-12 Saam Barati <sbarati@apple.com> |
| |
| DFG::emitCodeToGetArgumentsArrayLength needs to handle NewArrayBuffer/PhantomNewArrayBuffer |
| https://bugs.webkit.org/show_bug.cgi?id=182706 |
| <rdar://problem/36833681> |
| |
| Reviewed by Filip Pizlo. |
| |
| When we added support for PhantomNewArrayBuffer, we forgot to update |
| the emitCodeToGetArgumentsArrayLength function to handle PhantomNewArrayBuffer. |
| This patch adds that support. It's trivial to generate the length for |
| a PhantomNewArrayBuffer node since it's a constant buffer, with a constant |
| length. |
| |
| * dfg/DFGArgumentsUtilities.cpp: |
| (JSC::DFG::emitCodeToGetArgumentsArrayLength): |
| |
| 2018-02-12 Mark Lam <mark.lam@apple.com> |
| |
| Add more support for pointer preparations. |
| https://bugs.webkit.org/show_bug.cgi?id=182703 |
| <rdar://problem/37469451> |
| |
| Reviewed by Saam Barati. |
| |
| * llint/LLIntData.h: |
| (JSC::LLInt::getCodePtr): |
| * llint/LLIntPCRanges.h: |
| (JSC::LLInt::isLLIntPC): |
| * runtime/Options.cpp: |
| (JSC::recomputeDependentOptions): |
| |
| 2018-02-12 Mark Lam <mark.lam@apple.com> |
| |
| Fix missing exception check in RegExpObject::matchGlobal(). |
| https://bugs.webkit.org/show_bug.cgi?id=182701 |
| <rdar://problem/37465865> |
| |
| Reviewed by Michael Saboff. |
| |
| This issue was discovered when running JSC tests on an asm LLInt build with |
| JSC_useJIT=false. |
| |
| * runtime/RegExpObject.cpp: |
| (JSC::RegExpObject::matchGlobal): |
| |
| 2018-02-11 Guillaume Emont <guijemont@igalia.com> |
| |
| [MIPS] JSC needs to be built with -latomic |
| https://bugs.webkit.org/show_bug.cgi?id=182610 |
| |
| Reviewed by Žan Doberšek. |
| |
| Since r228149, on MIPS we need to link with -latomic, because |
| __atomic_fetch_add_8 is not available as a compiler intrinsic. |
| |
| * CMakeLists.txt: |
| |
| 2018-02-09 Filip Pizlo <fpizlo@apple.com> |
| |
| Don't waste memory for error.stack |
| https://bugs.webkit.org/show_bug.cgi?id=182656 |
| |
| Reviewed by Saam Barati. |
| |
| This makes the StackFrames in ErrorInstance and Exception weak. We simply forget their |
| contents if we GC. |
| |
| This isn't going to happen under normal operation since your callees and code blocks will |
| still be alive when you ask for .stack. |
| |
| Bug 182650 tracks improving this so that it's not lossy. For now, I think it's worth it, |
| since it is likely to recover 3-5 MB on membuster. |
| |
| * heap/Heap.cpp: |
| (JSC::Heap::finalizeUnconditionalFinalizers): |
| * runtime/ErrorInstance.cpp: |
| (JSC::ErrorInstance::visitChildren): |
| (JSC::ErrorInstance::finalizeUnconditionally): |
| * runtime/ErrorInstance.h: |
| (JSC::ErrorInstance::subspaceFor): |
| * runtime/Exception.cpp: |
| (JSC::Exception::visitChildren): |
| (JSC::Exception::finalizeUnconditionally): |
| * runtime/Exception.h: |
| (JSC::Exception::valueOffset): Deleted. |
| (JSC::Exception::value const): Deleted. |
| (JSC::Exception::stack const): Deleted. |
| (JSC::Exception::didNotifyInspectorOfThrow const): Deleted. |
| (JSC::Exception::setDidNotifyInspectorOfThrow): Deleted. |
| * runtime/StackFrame.cpp: |
| (JSC::StackFrame::isFinalizationCandidate): |
| (JSC::StackFrame::finalizeUnconditionally): |
| (JSC::StackFrame::visitChildren): Deleted. |
| * runtime/StackFrame.h: |
| * runtime/VM.cpp: |
| (JSC::VM::VM): |
| * runtime/VM.h: |
| |
| 2018-02-09 Carlos Alberto Lopez Perez <clopez@igalia.com> |
| |
| Fix build on ARMv7 traditional JSCOnly bot after r228306 |
| https://bugs.webkit.org/show_bug.cgi?id=182563 |
| |
| Unreviewed build fix. |
| |
| * assembler/AssemblerBuffer.h: |
| |
| 2018-02-08 Filip Pizlo <fpizlo@apple.com> |
| |
| Experiment with alternative implementation of memcpy/memset |
| https://bugs.webkit.org/show_bug.cgi?id=182563 |
| |
| Reviewed by Michael Saboff and Mark Lam. |
| |
| This adopts new fastCopy/fastZeroFill calls for calls to memcpy/memset that do not take a |
| constant size argument. |
| |
| * assembler/AssemblerBuffer.h: |
| (JSC::AssemblerBuffer::append): |
| * runtime/ArrayBuffer.cpp: |
| (JSC::ArrayBufferContents::tryAllocate): |
| (JSC::ArrayBufferContents::copyTo): |
| (JSC::ArrayBuffer::createInternal): |
| * runtime/ArrayBufferView.h: |
| (JSC::ArrayBufferView::zeroRangeImpl): |
| * runtime/ArrayConventions.cpp: |
| * runtime/ArrayConventions.h: |
| (JSC::clearArray): |
| * runtime/ArrayPrototype.cpp: |
| (JSC::arrayProtoPrivateFuncConcatMemcpy): |
| * runtime/ButterflyInlines.h: |
| (JSC::Butterfly::tryCreate): |
| (JSC::Butterfly::createOrGrowPropertyStorage): |
| (JSC::Butterfly::growArrayRight): |
| (JSC::Butterfly::resizeArray): |
| * runtime/GenericTypedArrayViewInlines.h: |
| (JSC::GenericTypedArrayView<Adaptor>::create): |
| * runtime/JSArray.cpp: |
| (JSC::JSArray::appendMemcpy): |
| (JSC::JSArray::fastSlice): |
| * runtime/JSArrayBufferView.cpp: |
| (JSC::JSArrayBufferView::ConstructionContext::ConstructionContext): |
| * runtime/JSGenericTypedArrayViewInlines.h: |
| (JSC::JSGenericTypedArrayView<Adaptor>::set): |
| * runtime/JSObject.cpp: |
| (JSC::JSObject::constructConvertedArrayStorageWithoutCopyingElements): |
| (JSC::JSObject::shiftButterflyAfterFlattening): |
| * runtime/PropertyTable.cpp: |
| (JSC::PropertyTable::PropertyTable): |
| |
| 2018-02-08 Don Olmstead <don.olmstead@sony.com> |
| |
| Remove JavaScriptCore/ForwardingHeaders directory |
| https://bugs.webkit.org/show_bug.cgi?id=182594 |
| |
| Reviewed by Mark Lam. |
| |
| * CMakeLists.txt: |
| * ForwardingHeaders/JavaScriptCore/APICast.h: Removed. |
| * ForwardingHeaders/JavaScriptCore/JSBase.h: Removed. |
| * ForwardingHeaders/JavaScriptCore/JSCTestRunnerUtils.h: Removed. |
| * ForwardingHeaders/JavaScriptCore/JSContextRef.h: Removed. |
| * ForwardingHeaders/JavaScriptCore/JSObjectRef.h: Removed. |
| * ForwardingHeaders/JavaScriptCore/JSObjectRefPrivate.h: Removed. |
| * ForwardingHeaders/JavaScriptCore/JSRetainPtr.h: Removed. |
| * ForwardingHeaders/JavaScriptCore/JSStringRef.h: Removed. |
| * ForwardingHeaders/JavaScriptCore/JSStringRefCF.h: Removed. |
| * ForwardingHeaders/JavaScriptCore/JSTypedArray.h: Removed. |
| * ForwardingHeaders/JavaScriptCore/JSValueRef.h: Removed. |
| * ForwardingHeaders/JavaScriptCore/JavaScript.h: Removed. |
| * ForwardingHeaders/JavaScriptCore/JavaScriptCore.h: Removed. |
| * ForwardingHeaders/JavaScriptCore/OpaqueJSString.h: Removed. |
| * ForwardingHeaders/JavaScriptCore/WebKitAvailability.h: Removed. |
| |
| 2018-02-06 Yusuke Suzuki <utatane.tea@gmail.com> |
| |
| [JSC] Implement Array.prototype.flatMap and Array.prototype.flatten |
| https://bugs.webkit.org/show_bug.cgi?id=182440 |
| |
| Reviewed by Darin Adler. |
| |
| This patch implements Array.prototype.flatMap and Array.prototype.flatten |
| since they are now stage 3 [1]. |
| |
| [1]: https://tc39.github.io/proposal-flatMap/#sec-FlattenIntoArray |
| |
| * builtins/ArrayPrototype.js: |
| (filter): |
| (map): |
| (globalPrivate.concatSlowPath): |
| (globalPrivate.arraySpeciesCreate): |
| (globalPrivate.flattenIntoArray): |
| (flatten): |
| (globalPrivate.flattenIntoArrayWithCallback): |
| We separate flattenIntoArray from flattenIntoArrayWithCallback due to performance reason. |
| We carefully keep both functions small to encourage inlining. |
| |
| (flatMap): |
| * runtime/ArrayPrototype.cpp: |
| (JSC::ArrayPrototype::finishCreation): |
| |
| 2018-01-13 Darin Adler <darin@apple.com> |
| |
| Event improvements |
| https://bugs.webkit.org/show_bug.cgi?id=179591 |
| |
| Reviewed by Chris Dumez. |
| |
| Remove all uses of ScriptValue other than in the implementation of ScriptObject. |
| |
| * bindings/ScriptFunctionCall.cpp: Removed include of ScriptValue.h. |
| |
| * bindings/ScriptObject.cpp: Removed unused overload of ScriptObject constructor. |
| * bindings/ScriptObject.h: Ditto. |
| |
| * bindings/ScriptValue.cpp: |
| (Deprecated::ScriptValue::~ScriptValue): Deleted. |
| (Deprecated::ScriptValue::getString const): Deleted. |
| (Deprecated::ScriptValue::toString const): Deleted. |
| (Deprecated::ScriptValue::isEqual const): Deleted. |
| (Deprecated::ScriptValue::isNull const): Deleted. |
| (Deprecated::ScriptValue::isUndefined const): Deleted. |
| (Deprecated::ScriptValue::isObject const): Deleted. |
| (Deprecated::ScriptValue::isFunction const): Deleted. |
| (Deprecated::ScriptValue::toInspectorValue const): Deleted. |
| * bindings/ScriptValue.h: Removed many unused functions. Made the rest |
| protected since this is now used only in ScriptObject. |
| |
| * inspector/ConsoleMessage.cpp: |
| (Inspector::ConsoleMessage::addToFrontend): Stop using ScriptValue. |
| (Inspector::ConsoleMessage::isEqual const): Updated for change to ScriptArguments::isEqual. |
| |
| * inspector/ScriptArguments.cpp: |
| (Inspector::ScriptArguments::create): Take a Vector of JSC::Strong, not ScriptValue, |
| use rvalue reference with move instead of lvalue reference with swap, and take execution |
| state by reference instead of pointer. |
| (Inspector::ScriptArguments::createEmpty): Deleted. Can now use create instead. |
| (Inspector::ScriptArguments::ScriptArguments): Ditto. |
| (Inspector::ScriptArguments::~ScriptArguments): Deleted. |
| (Inspector::ScriptArguments::argumentAt const): Updated to use JSC::Strong. |
| (Inspector::ScriptArguments::getFirstArgumentAsString): Ditto. |
| (Inspector::ScriptArguments::isEqual const): Ditto. Also changed to use JS internals |
| instead of calling through the C API. |
| * inspector/ScriptArguments.h: Updated for the above. |
| |
| * inspector/ScriptCallStackFactory.cpp: |
| (Inspector::createScriptArguments): Updated for changes to ScriptArguments. |
| |
| * inspector/ScriptDebugServer.cpp: Removed include of ScriptValue.h. |
| * inspector/agents/InspectorAgent.cpp: Ditto. |
| * inspector/agents/InspectorDebuggerAgent.cpp: Ditto. |
| (Inspector::InspectorDebuggerAgent::evaluateOnCallFrame): Use JSC::Strong instead |
| of ScriptValue. |
| (Inspector::InspectorDebuggerAgent::currentCallFrames): Ditto. |
| * inspector/agents/InspectorDebuggerAgent.h: Ditto. |
| * runtime/ConsoleClient.cpp: |
| (JSC::ConsoleClient::printConsoleMessageWithArguments): Ditto. |
| (JSC::ConsoleClient::clear): Use ScriptArguments::create and pass an empty vector |
| instead of calling a separate createEmpty function. |
| |
| * runtime/VM.cpp: |
| (JSC::VM::createLeaked): Deleted. |
| * runtime/VM.h: Deleted createLeaked. |
| |
| 2018-02-06 Brian Burg <bburg@apple.com> |
| |
| Web Inspector: protocol generator should automatically deduce the correct include style to use |
| https://bugs.webkit.org/show_bug.cgi?id=182505 |
| |
| Reviewed by Timothy Hatcher. |
| |
| Currently the generated imports use a mix of system header imports (powered by forwarding headers) |
| and framework-style includes. Since forwarding headers are going away, this patch stops |
| using system header includes for headers that are JavaScriptCore private headers. Instead, |
| use either a relative include or a framework include. |
| |
| * inspector/scripts/codegen/generate_cpp_alternate_backend_dispatcher_header.py: |
| (CppAlternateBackendDispatcherHeaderGenerator.generate_output): |
| (CppAlternateBackendDispatcherHeaderGenerator): |
| (CppAlternateBackendDispatcherHeaderGenerator._generate_secondary_header_includes): |
| * inspector/scripts/codegen/generate_cpp_backend_dispatcher_header.py: |
| (CppBackendDispatcherHeaderGenerator.generate_output): |
| (CppBackendDispatcherHeaderGenerator._generate_secondary_header_includes): |
| * inspector/scripts/codegen/generate_cpp_backend_dispatcher_implementation.py: |
| (CppBackendDispatcherImplementationGenerator.generate_output): |
| (CppBackendDispatcherImplementationGenerator._generate_secondary_header_includes): |
| * inspector/scripts/codegen/generate_cpp_frontend_dispatcher_header.py: |
| (CppFrontendDispatcherHeaderGenerator.generate_output): |
| (CppFrontendDispatcherHeaderGenerator._generate_secondary_header_includes): |
| * inspector/scripts/codegen/generate_cpp_frontend_dispatcher_implementation.py: |
| (CppFrontendDispatcherImplementationGenerator.generate_output): |
| (CppFrontendDispatcherImplementationGenerator._generate_secondary_header_includes): |
| * inspector/scripts/codegen/generate_cpp_protocol_types_header.py: |
| (CppProtocolTypesHeaderGenerator.generate_output): |
| (CppProtocolTypesHeaderGenerator._generate_secondary_header_includes): |
| * inspector/scripts/codegen/generate_cpp_protocol_types_implementation.py: |
| (CppProtocolTypesImplementationGenerator.generate_output): |
| (CppProtocolTypesImplementationGenerator._generate_secondary_header_includes): |
| * inspector/scripts/codegen/generate_objc_backend_dispatcher_header.py: |
| (ObjCBackendDispatcherHeaderGenerator): |
| Convert existing header lists to the new entries format, which includes the |
| allowable target frameworks and the relative path to the header. |
| |
| * inspector/scripts/codegen/generator.py: |
| (Generator.generate_includes_from_entries): |
| Copied from the same in the builtins code generator. It still works great. |
| |
| * inspector/scripts/tests/all/expected/definitions-with-mac-platform.json-result: |
| * inspector/scripts/tests/generic/expected/commands-with-async-attribute.json-result: |
| * inspector/scripts/tests/generic/expected/commands-with-optional-call-return-parameters.json-result: |
| * inspector/scripts/tests/generic/expected/definitions-with-mac-platform.json-result: |
| * inspector/scripts/tests/generic/expected/domain-availability.json-result: |
| * inspector/scripts/tests/generic/expected/domains-with-varying-command-sizes.json-result: |
| * inspector/scripts/tests/generic/expected/enum-values.json-result: |
| * inspector/scripts/tests/generic/expected/events-with-optional-parameters.json-result: |
| * inspector/scripts/tests/generic/expected/generate-domains-with-feature-guards.json-result: |
| * inspector/scripts/tests/generic/expected/same-type-id-different-domain.json-result: |
| * inspector/scripts/tests/generic/expected/shadowed-optional-type-setters.json-result: |
| * inspector/scripts/tests/generic/expected/type-declaration-aliased-primitive-type.json-result: |
| * inspector/scripts/tests/generic/expected/type-declaration-array-type.json-result: |
| * inspector/scripts/tests/generic/expected/type-declaration-enum-type.json-result: |
| * inspector/scripts/tests/generic/expected/type-declaration-object-type.json-result: |
| * inspector/scripts/tests/generic/expected/type-requiring-runtime-casts.json-result: |
| * inspector/scripts/tests/generic/expected/type-with-open-parameters.json-result: |
| * inspector/scripts/tests/generic/expected/worker-supported-domains.json-result: |
| * inspector/scripts/tests/ios/expected/definitions-with-mac-platform.json-result: |
| * inspector/scripts/tests/mac/expected/definitions-with-mac-platform.json-result: |
| Rebaseline. |
| |
| 2018-02-06 Keith Miller <keith_miller@apple.com> |
| |
| put_to_scope/get_from_scope should not cache lexical scopes when expecting a global object |
| https://bugs.webkit.org/show_bug.cgi?id=182549 |
| <rdar://problem/36189995> |
| |
| Reviewed by Saam Barati. |
| |
| Previously, the llint/baseline caching for put_to_scope and |
| get_from_scope would cache lexical environments when the |
| varInjectionWatchpoint had been fired for global properties. Code |
| in the DFG does not follow this same assumption so we could |
| potentially return the wrong result. Additionally, the baseline |
| would write barrier the global object rather than the lexical |
| enviroment object. This patch makes it so that we do not cache |
| anything other than the global object for when the resolve type is |
| GlobalPropertyWithVarInjectionChecks or GlobalProperty. |
| |
| * assembler/MacroAssembler.cpp: |
| (JSC::MacroAssembler::jitAssert): |
| * assembler/MacroAssembler.h: |
| * jit/JITPropertyAccess.cpp: |
| (JSC::JIT::emit_op_get_from_scope): |
| (JSC::JIT::emit_op_put_to_scope): |
| * runtime/CommonSlowPaths.h: |
| (JSC::CommonSlowPaths::tryCachePutToScopeGlobal): |
| (JSC::CommonSlowPaths::tryCacheGetFromScopeGlobal): |
| * runtime/Options.h: |
| |
| 2018-01-28 Filip Pizlo <fpizlo@apple.com> |
| |
| Global objects should be able to use TLCs to allocate from different blocks from each other |
| https://bugs.webkit.org/show_bug.cgi?id=182227 |
| |
| Reviewed by JF Bastien. |
| |
| This uses TLCs to create at least `minimumDistanceBetweenCellsFromDifferenOrigins` bytes of |
| distance between objects from different origins, using the following combination of things. For |
| short lets refer to that constant as K. |
| |
| - Since r227721, LargeAllocation puts K bytes padding at the end of each allocation. |
| |
| - Since r227718, MarkedBlock puts at least K bytes in its footer. |
| |
| - Since r227617, global objects can have their own TLCs, which make them allocate from a |
| different set of blocks than other global objects. The TLC of a global object comes into |
| effect when you enter the VM via that global object. |
| |
| - With this change, TLCs and blocks both have security origins. A TLC will only use blocks that |
| share the same security origin or empty blocks (in which case we zero the block and change |
| its security origin). |
| |
| WebCore determines the TLC-GlobalObject mapping. By default, global objects would simply use |
| the VM's default TLC. WebCore makes it so that DOM windows (but not worker global objects) get |
| a TLC based on their document's SecurityOrigin. |
| |
| * JavaScriptCore.xcodeproj/project.pbxproj: |
| * Sources.txt: |
| * heap/BlockDirectory.cpp: |
| (JSC::BlockDirectory::findBlockForAllocation): |
| (JSC::BlockDirectory::prepareForAllocation): |
| * heap/BlockDirectory.h: |
| * heap/LocalAllocator.cpp: |
| (JSC::LocalAllocator::LocalAllocator): |
| (JSC::LocalAllocator::reset): |
| (JSC::LocalAllocator::~LocalAllocator): |
| (JSC::LocalAllocator::allocateSlowCase): |
| (JSC::LocalAllocator::tryAllocateWithoutCollecting): |
| * heap/LocalAllocator.h: |
| (JSC::LocalAllocator::tlc const): |
| * heap/MarkStackMergingConstraint.cpp: |
| * heap/MarkStackMergingConstraint.h: |
| * heap/MarkedBlock.cpp: |
| (JSC::MarkedBlock::Handle::associateWithOrigin): |
| * heap/MarkedBlock.h: |
| (JSC::MarkedBlock::Handle::securityOriginToken const): |
| * heap/SecurityOriginToken.cpp: Added. |
| (JSC::uniqueSecurityOriginToken): |
| * heap/SecurityOriginToken.h: Added. |
| * heap/ThreadLocalCache.cpp: |
| (JSC::ThreadLocalCache::create): |
| (JSC::ThreadLocalCache::ThreadLocalCache): |
| (JSC::ThreadLocalCache::allocateData): |
| (JSC::ThreadLocalCache::installSlow): |
| * heap/ThreadLocalCache.h: |
| (JSC::ThreadLocalCache::securityOriginToken const): |
| * heap/ThreadLocalCacheInlines.h: |
| (JSC::ThreadLocalCache::install): |
| * runtime/JSGlobalObject.cpp: |
| (JSC::JSGlobalObject::JSGlobalObject): |
| (JSC::JSGlobalObject::createThreadLocalCache): |
| * runtime/JSGlobalObject.h: |
| (JSC::JSGlobalObject::threadLocalCache): |
| (JSC::JSGlobalObject::threadLocalCache const): Deleted. |
| * runtime/VMEntryScope.cpp: |
| (JSC::VMEntryScope::VMEntryScope): |
| (JSC::VMEntryScope::~VMEntryScope): |
| * runtime/VMEntryScope.h: |
| |
| 2018-02-05 Don Olmstead <don.olmstead@sony.com> |
| |
| JavaScriptCore files should not be included relatively |
| https://bugs.webkit.org/show_bug.cgi?id=182452 |
| |
| Reviewed by Keith Miller. |
| |
| * API/JSCallbackConstructor.h: |
| * CMakeLists.txt: |
| * disassembler/ARM64Disassembler.cpp: |
| * disassembler/ARMv7Disassembler.cpp: |
| * heap/LockDuringMarking.h: |
| * inspector/InjectedScriptBase.h: |
| * inspector/InjectedScriptHost.h: |
| * inspector/JavaScriptCallFrame.h: |
| * inspector/ScriptArguments.h: |
| * inspector/ScriptDebugListener.h: |
| * inspector/ScriptDebugServer.h: |
| * inspector/agents/InspectorAgent.h: |
| * inspector/agents/InspectorConsoleAgent.h: |
| * inspector/agents/InspectorDebuggerAgent.h: |
| * inspector/agents/InspectorHeapAgent.h: |
| * inspector/agents/InspectorRuntimeAgent.h: |
| * inspector/agents/InspectorScriptProfilerAgent.h: |
| * runtime/RegExp.h: |
| |
| 2018-02-05 Commit Queue <commit-queue@webkit.org> |
| |
| Unreviewed, rolling out r228012. |
| https://bugs.webkit.org/show_bug.cgi?id=182493 |
| |
| "It regressed ARES-6 by 2-4%" (Requested by saamyjoon on |
| #webkit). |
| |
| Reverted changeset: |
| |
| "[JSC] Clean up ArraySpeciesCreate" |
| https://bugs.webkit.org/show_bug.cgi?id=182434 |
| https://trac.webkit.org/changeset/228012 |
| |
| 2018-02-02 Ryan Haddad <ryanhaddad@apple.com> |
| |
| Rebaseline bindings generator tests after r228032. |
| https://bugs.webkit.org/show_bug.cgi?id=182445 |
| |
| Unreviewed test gardening. |
| |
| * Scripts/tests/builtins/expected/WebCoreJSBuiltins.h-result: |
| |
| 2018-02-02 Saam Barati <sbarati@apple.com> |
| |
| Make various DFG_ASSERTs provide more data to WTFCrashWithInfo |
| https://bugs.webkit.org/show_bug.cgi?id=182453 |
| <rdar://problem/37174236> |
| |
| Reviewed by JF Bastien and Mark Lam. |
| |
| * dfg/DFGAbstractInterpreterInlines.h: |
| (JSC::DFG::AbstractInterpreter<AbstractStateType>::executeEffects): |
| * dfg/DFGArgumentsEliminationPhase.cpp: |
| * dfg/DFGArgumentsUtilities.cpp: |
| (JSC::DFG::emitCodeToGetArgumentsArrayLength): |
| * dfg/DFGFixupPhase.cpp: |
| (JSC::DFG::FixupPhase::fixupChecksInBlock): |
| * dfg/DFGFlowIndexing.h: |
| (JSC::DFG::FlowIndexing::shadowIndex const): |
| * dfg/DFGLICMPhase.cpp: |
| (JSC::DFG::LICMPhase::run): |
| (JSC::DFG::LICMPhase::attemptHoist): |
| * dfg/DFGLoopPreHeaderCreationPhase.cpp: |
| (JSC::DFG::LoopPreHeaderCreationPhase::run): |
| * dfg/DFGPutStackSinkingPhase.cpp: |
| * dfg/DFGSpeculativeJIT.cpp: |
| (JSC::DFG::SpeculativeJIT::compileArithAbs): |
| (JSC::DFG::SpeculativeJIT::compileArithRounding): |
| (JSC::DFG::SpeculativeJIT::compileToPrimitive): |
| * dfg/DFGSpeculativeJIT64.cpp: |
| (JSC::DFG::SpeculativeJIT::fillJSValue): |
| (JSC::DFG::SpeculativeJIT::fillSpeculateInt32Internal): |
| (JSC::DFG::SpeculativeJIT::fillSpeculateInt32Strict): |
| (JSC::DFG::SpeculativeJIT::fillSpeculateInt52): |
| (JSC::DFG::SpeculativeJIT::fillSpeculateDouble): |
| (JSC::DFG::SpeculativeJIT::fillSpeculateBoolean): |
| (JSC::DFG::SpeculativeJIT::compile): |
| * dfg/DFGStoreBarrierClusteringPhase.cpp: |
| * dfg/DFGStoreBarrierInsertionPhase.cpp: |
| * ftl/FTLLowerDFGToB3.cpp: |
| (JSC::FTL::DFG::LowerDFGToB3::compileGetStack): |
| (JSC::FTL::DFG::LowerDFGToB3::compileArithClz32): |
| (JSC::FTL::DFG::LowerDFGToB3::compileArithAbs): |
| (JSC::FTL::DFG::LowerDFGToB3::compileArithRound): |
| (JSC::FTL::DFG::LowerDFGToB3::compileArithFloor): |
| (JSC::FTL::DFG::LowerDFGToB3::compileArithCeil): |
| (JSC::FTL::DFG::LowerDFGToB3::compileArithTrunc): |
| (JSC::FTL::DFG::LowerDFGToB3::compileArithNegate): |
| (JSC::FTL::DFG::LowerDFGToB3::compilePutById): |
| (JSC::FTL::DFG::LowerDFGToB3::compileGetIndexedPropertyStorage): |
| (JSC::FTL::DFG::LowerDFGToB3::compileGetByVal): |
| (JSC::FTL::DFG::LowerDFGToB3::compileStringFromCharCode): |
| (JSC::FTL::DFG::LowerDFGToB3::compileMultiPutByOffset): |
| (JSC::FTL::DFG::LowerDFGToB3::compileCompareEq): |
| (JSC::FTL::DFG::LowerDFGToB3::compileCompareStrictEq): |
| (JSC::FTL::DFG::LowerDFGToB3::compileIn): |
| (JSC::FTL::DFG::LowerDFGToB3::compare): |
| (JSC::FTL::DFG::LowerDFGToB3::switchStringRecurse): |
| (JSC::FTL::DFG::LowerDFGToB3::lowInt32): |
| (JSC::FTL::DFG::LowerDFGToB3::lowInt52): |
| (JSC::FTL::DFG::LowerDFGToB3::lowCell): |
| (JSC::FTL::DFG::LowerDFGToB3::lowBoolean): |
| (JSC::FTL::DFG::LowerDFGToB3::lowDouble): |
| (JSC::FTL::DFG::LowerDFGToB3::lowJSValue): |
| |
| 2018-02-02 Don Olmstead <don.olmstead@sony.com> |
| |
| JS Builtins should include JavaScriptCore headers directly |
| https://bugs.webkit.org/show_bug.cgi?id=182445 |
| |
| Reviewed by Yusuke Suzuki. |
| |
| * Scripts/builtins/builtins_generator.py: |
| * Scripts/tests/builtins/expected/WebCore-AnotherGuardedInternalBuiltin-Separate.js-result: |
| * Scripts/tests/builtins/expected/WebCore-ArbitraryConditionalGuard-Separate.js-result: |
| * Scripts/tests/builtins/expected/WebCore-GuardedBuiltin-Separate.js-result: |
| * Scripts/tests/builtins/expected/WebCore-GuardedInternalBuiltin-Separate.js-result: |
| * Scripts/tests/builtins/expected/WebCore-UnguardedBuiltin-Separate.js-result: |
| * Scripts/tests/builtins/expected/WebCore-xmlCasingTest-Separate.js-result: |
| |
| 2018-02-02 Saam Barati <sbarati@apple.com> |
| |
| When BytecodeParser inserts Unreachable after ForceOSRExit it needs to update ArgumentPositions for Flushes it inserts |
| https://bugs.webkit.org/show_bug.cgi?id=182368 |
| <rdar://problem/36932466> |
| |
| Reviewed by Mark Lam. |
| |
| When preserving liveness when inserting Unreachable nodes after ForceOSRExit, |
| we must add the VariableAccessData to the given argument position. Otherwise, |
| we may end up with a VariableAccessData that doesn't respect the shouldNeverUnbox bit. |
| If we end up with such a situation, it can lead to invalid IR after the |
| arguments elimination phase optimizes a GetByVal to a GetStack. |
| |
| * dfg/DFGByteCodeParser.cpp: |
| (JSC::DFG::ByteCodeParser::flushImpl): |
| (JSC::DFG::ByteCodeParser::flushForTerminalImpl): |
| (JSC::DFG::ByteCodeParser::flush): |
| (JSC::DFG::ByteCodeParser::flushForTerminal): |
| (JSC::DFG::ByteCodeParser::InlineStackEntry::InlineStackEntry): |
| (JSC::DFG::ByteCodeParser::parse): |
| |
| 2018-02-02 Mark Lam <mark.lam@apple.com> |
| |
| More ARM64_32 fixes. |
| https://bugs.webkit.org/show_bug.cgi?id=182441 |
| <rdar://problem/37162310> |
| |
| Reviewed by Dan Bernstein. |
| |
| I also disabled more dynamicPoisoning code in ARM64_32. This code assumes a |
| 64-bit pointer which is not applicable here. |
| |
| * jit/AssemblyHelpers.cpp: |
| (JSC::AssemblyHelpers::emitDynamicPoison): |
| (JSC::AssemblyHelpers::emitDynamicPoisonOnLoadedType): |
| (JSC::AssemblyHelpers::emitDynamicPoisonOnType): |
| |
| 2018-02-02 Saam Barati <sbarati@apple.com> |
| |
| MapHash should return true to doesGC in the DFG depending on useKind because it might resolve a rope |
| https://bugs.webkit.org/show_bug.cgi?id=182402 |
| |
| Reviewed by Yusuke Suzuki. |
| |
| * dfg/DFGDoesGC.cpp: |
| (JSC::DFG::doesGC): |
| |
| 2018-02-02 Yusuke Suzuki <utatane.tea@gmail.com> |
| |
| [JSC] Clean up ArraySpeciesCreate |
| https://bugs.webkit.org/show_bug.cgi?id=182434 |
| |
| Reviewed by Saam Barati. |
| |
| We have duplicate code in filter, map, concatSlowPath. |
| This patch creates a new global private function @arraySpeciesCreate, |
| and use it. |
| |
| * builtins/ArrayPrototype.js: |
| (globalPrivate.arraySpeciesCreate): |
| (filter): |
| (map): |
| (globalPrivate.concatSlowPath): |
| |
| 2018-02-01 Mark Lam <mark.lam@apple.com> |
| |
| Fix broken bounds check in FTL's compileGetMyArgumentByVal(). |
| https://bugs.webkit.org/show_bug.cgi?id=182419 |
| <rdar://problem/37044945> |
| |
| Reviewed by Saam Barati. |
| |
| In compileGetMyArgumentByVal(), it computes: |
| limit = m_out.sub(limit, m_out.constInt32(m_node->numberOfArgumentsToSkip())); |
| ... |
| LValue isOutOfBounds = m_out.aboveOrEqual(originalIndex, limit); |
| |
| where the original "limit" is the number of arguments passed in by the caller. |
| If the original limit is less than numberOfArgumentsToSkip, the resultant limit |
| will be a large unsigned number. As a result, this will defeat the bounds check |
| that follows it. |
| |
| Note: later on in compileGetMyArgumentByVal(), we have to adjust adjust the index |
| value by adding numberOfArgumentsToSkip to it, in order to determine the actual |
| entry in the arguments array to get. |
| |
| The fix is to just add numberOfArgumentsToSkip to index upfront (instead of |
| subtracting it from limit), and doing an overflow speculation check on that |
| addition before doing the bounds check. |
| |
| * ftl/FTLLowerDFGToB3.cpp: |
| (JSC::FTL::DFG::LowerDFGToB3::compileGetMyArgumentByVal): |
| |
| 2018-02-01 Keith Miller <keith_miller@apple.com> |
| |
| Fix crashes due to mishandling custom sections. |
| https://bugs.webkit.org/show_bug.cgi?id=182404 |
| <rdar://problem/36935863> |
| |
| Reviewed by Saam Barati. |
| |
| This also cleans up some of our validation code. We also |
| mistakenly, allowed unknown (different from custom sections with |
| id: 0) section ids. |
| |
| * wasm/WasmModuleParser.cpp: |
| (JSC::Wasm::ModuleParser::parse): |
| * wasm/WasmModuleParser.h: |
| * wasm/WasmSections.h: |
| (JSC::Wasm::isKnownSection): |
| (JSC::Wasm::decodeSection): |
| (JSC::Wasm::validateOrder): |
| (JSC::Wasm::makeString): |
| (JSC::Wasm::isValidSection): Deleted. |
| |
| 2018-02-01 Michael Catanzaro <mcatanzaro@igalia.com> |
| |
| -Wreturn-type warning in DFGObjectAllocationSinkingPhase.cpp |
| https://bugs.webkit.org/show_bug.cgi?id=182389 |
| |
| Reviewed by Yusuke Suzuki. |
| |
| Fix the warning. |
| |
| As a bonus, remove a couple unreachable breaks for good measure. |
| |
| * dfg/DFGObjectAllocationSinkingPhase.cpp: |
| |
| 2018-02-01 Chris Dumez <cdumez@apple.com> |
| |
| Queue a microtask when a waitUntil() promise is settled |
| https://bugs.webkit.org/show_bug.cgi?id=182372 |
| <rdar://problem/37101019> |
| |
| Reviewed by Mark Lam. |
| |
| Export a symbol so it can be used in WebCore. |
| |
| * runtime/JSGlobalObject.h: |
| |
| 2018-01-31 Don Olmstead <don.olmstead@sony.com> |
| |
| [CMake] Make JavaScriptCore headers copies |
| https://bugs.webkit.org/show_bug.cgi?id=182303 |
| |
| Reviewed by Alex Christensen. |
| |
| * CMakeLists.txt: |
| * PlatformGTK.cmake: |
| * PlatformJSCOnly.cmake: |
| * PlatformMac.cmake: |
| * PlatformWPE.cmake: |
| * PlatformWin.cmake: |
| * shell/CMakeLists.txt: |
| * shell/PlatformWin.cmake: |
| |
| 2018-01-31 Saam Barati <sbarati@apple.com> |
| |
| Replace tryLargeMemalignVirtual with tryLargeZeroedMemalignVirtual and use it to allocate large zeroed memory in Wasm |
| https://bugs.webkit.org/show_bug.cgi?id=182064 |
| <rdar://problem/36840132> |
| |
| Reviewed by Geoffrey Garen. |
| |
| This patch switches WebAssembly Memory to always use bmalloc's |
| zeroed virtual allocation API. This makes it so that we don't |
| dirty the memory to zero it. It's a huge compile time speedup |
| on WasmBench on iOS. |
| |
| * wasm/WasmMemory.cpp: |
| (JSC::Wasm::Memory::create): |
| (JSC::Wasm::Memory::~Memory): |
| (JSC::Wasm::Memory::addressIsInActiveFastMemory): |
| (JSC::Wasm::Memory::grow): |
| (JSC::Wasm::commitZeroPages): Deleted. |
| |
| 2018-01-31 Mark Lam <mark.lam@apple.com> |
| |
| Build fix for CLoop after r227874. |
| https://bugs.webkit.org/show_bug.cgi?id=182155 |
| <rdar://problem/36286266> |
| |
| Not reviewed. |
| |
| Just needed support for lea of a LabelReference in cloop.rb (just like those |
| added for arm64.rb and x86.rb). |
| |
| * offlineasm/cloop.rb: |
| |
| 2018-01-31 Keith Miller <keith_miller@apple.com> |
| |
| Canonicalize aquiring the JSCell lock. |
| https://bugs.webkit.org/show_bug.cgi?id=182320 |
| |
| Reviewed by Michael Saboff. |
| |
| It's currently kinda annoying to figure out where |
| we aquire the a JSCell's lock. This patch adds a |
| helper to make it easier to grep... |
| |
| * bytecode/UnlinkedCodeBlock.cpp: |
| (JSC::UnlinkedCodeBlock::visitChildren): |
| (JSC::UnlinkedCodeBlock::setInstructions): |
| (JSC::UnlinkedCodeBlock::shrinkToFit): |
| * runtime/ErrorInstance.cpp: |
| (JSC::ErrorInstance::finishCreation): |
| (JSC::ErrorInstance::materializeErrorInfoIfNeeded): |
| (JSC::ErrorInstance::visitChildren): |
| * runtime/JSArray.cpp: |
| (JSC::JSArray::shiftCountWithArrayStorage): |
| (JSC::JSArray::unshiftCountWithArrayStorage): |
| * runtime/JSCell.h: |
| (JSC::JSCell::cellLock): |
| * runtime/JSObject.cpp: |
| (JSC::JSObject::visitButterflyImpl): |
| (JSC::JSObject::convertContiguousToArrayStorage): |
| * runtime/JSPropertyNameEnumerator.cpp: |
| (JSC::JSPropertyNameEnumerator::visitChildren): |
| * runtime/SparseArrayValueMap.cpp: |
| (JSC::SparseArrayValueMap::add): |
| (JSC::SparseArrayValueMap::remove): |
| (JSC::SparseArrayValueMap::visitChildren): |
| |
| 2018-01-31 Saam Barati <sbarati@apple.com> |
| |
| JSC incorrectly interpreting script, sets Global Property instead of Global Lexical variable (LiteralParser / JSONP path) |
| https://bugs.webkit.org/show_bug.cgi?id=182074 |
| <rdar://problem/36846261> |
| |
| Reviewed by Mark Lam. |
| |
| This patch teaches the JSONP evaluator about the global lexical environment. |
| Before, it was using the global object as the global scope, but that's wrong. |
| The global lexical environment is the first node in the global scope chain. |
| |
| * interpreter/Interpreter.cpp: |
| (JSC::Interpreter::executeProgram): |
| * jsc.cpp: |
| (GlobalObject::finishCreation): |
| (shellSupportsRichSourceInfo): |
| (functionDisableRichSourceInfo): |
| * runtime/LiteralParser.cpp: |
| (JSC::LiteralParser<CharType>::tryJSONPParse): |
| * runtime/LiteralParser.h: |
| |
| 2018-01-31 Saam Barati <sbarati@apple.com> |
| |
| clean up pushToSaveImmediateWithoutTouchingRegisters a bit |
| https://bugs.webkit.org/show_bug.cgi?id=181774 |
| |
| Reviewed by JF Bastien. |
| |
| This function on ARM64 was considering what to do with the scratch |
| register. And conditionally invalidated what was in it. This is not |
| relevant though, since the function always recovers what was in that |
| register. This patch just switches it to using dataTempRegister |
| directly and updates the comment to describe why it can do so safely. |
| |
| * assembler/MacroAssemblerARM64.h: |
| (JSC::MacroAssemblerARM64::pushToSaveImmediateWithoutTouchingRegisters): |
| |
| 2018-01-30 Mark Lam <mark.lam@apple.com> |
| |
| Apply poisoning to TypedArray vector pointers. |
| https://bugs.webkit.org/show_bug.cgi?id=182155 |
| <rdar://problem/36286266> |
| |
| Reviewed by JF Bastien. |
| |
| The TypeArray's vector pointer is now poisoned. The poison value is chosen based |
| on a TypeArray's jsType. The JSType must be between FirstTypedArrayType and |
| LastTypedArrayType. At runtime, we enforce that the index is well-behaved by |
| masking it against TypedArrayPoisonIndexMask. TypedArrayPoisonIndexMask (16) is |
| the number of TypedArray types (10) rounded up to the next power of 2. |
| Accordingly, we reserve an array of TypedArrayPoisonIndexMask poisons so that we |
| can use index masking on the index, and be guaranteed that the masked index will |
| be within bounds of the poisons array. |
| |
| 1. Fixed both DFG and FTL versions of compileGetTypedArrayByteOffset() to not |
| do any unnecessary work if the TypedArray vector is null. |
| |
| FTL's cagedMayBeNull() is no longer needed because it is only used by |
| compileGetTypedArrayByteOffset(), and we need to enhance it to handle unpoisoning |
| in a TypedArray specific way. So, might as well do the work inline in |
| compileGetTypedArrayByteOffset() instead. |
| |
| 2. Removed an unnecessary null-check in DFGSpeculativeJIT's compileNewTypedArrayWithSize() |
| because there's already a null check above it that ensures that sizeGPR is |
| never null. |
| |
| 3. In LLInt's _llint_op_get_by_val, move the TypedArray length check before the |
| loading of the vector for unpoisoning and uncaging. We don't need the vector |
| if the length is 0. |
| |
| Implementation notes on the need to null check the TypeArray vector: |
| |
| 1. DFG::SpeculativeJIT::jumpForTypedArrayIsNeuteredIfOutOfBounds() does not need a |
| m_poisonedVector null check because the function is a null check. |
| |
| 2. DFG::SpeculativeJIT::compileGetIndexedPropertyStorage() does not need a |
| m_poisonedVector null check because it is followed by a call to |
| cageTypedArrayStorage() which assumes that storageReg cannot be null. |
| |
| 3. DFG::SpeculativeJIT::compileGetTypedArrayByteOffset() already has a |
| m_poisonedVector null check. |
| |
| 4. DFG::SpeculativeJIT::compileNewTypedArrayWithSize() does not need a vector null |
| check because the poisoning code is preceded by a sizeGPR null check, which |
| ensures that the storageGPR (vector to be poisoned) is not null. |
| |
| 5. FTL's compileGetIndexedPropertyStorage() does not need a m_poisonedVector null |
| check because it is followed by a call to caged() which assumes that the |
| vector cannot be null. |
| |
| 6. FTL's compileGetTypedArrayByteOffset() already has a m_poisonedVector null check. |
| |
| 7. FTL's compileNewTypedArray() does not need a vector null check because the |
| poisoning code is preceded by a size null check, which ensures that the |
| storage (vector to be poisoned) is not null. |
| |
| 8. FTL's speculateTypedArrayIsNotNeutered() does not need a |
| m_poisonedVector null check because the function is a null check. |
| |
| 9. IntrinsicGetterAccessCase::emitIntrinsicGetter()'s TypedArrayByteOffsetIntrinsic |
| case needs a null check so that it does not try to unpoison a null vector. |
| |
| 10. JIT::emitIntTypedArrayGetByVal() does not need a vector null check because |
| we already do a length check even before loading the vector. |
| |
| 11. JIT::emitFloatTypedArrayGetByVal() does not need a vector null check because |
| we already do a length check even before loading the vector. |
| |
| 12. JIT::emitIntTypedArrayPutByVal() does not need a vector null check because |
| we already do a length check even before loading the vector. |
| |
| 13. JIT::emitFloatTypedArrayPutByVal() does not need a vector null check because |
| we already do a length check even before loading the vector. |
| |
| 14. LLInt's loadTypedArrayCaged() does not need a vector null check because its |
| client will do a TypedArray length check before calling it. |
| |
| * dfg/DFGFixupPhase.cpp: |
| (JSC::DFG::FixupPhase::checkArray): |
| * dfg/DFGNode.h: |
| (JSC::DFG::Node::hasArrayMode): |
| * dfg/DFGSpeculativeJIT.cpp: |
| (JSC::DFG::SpeculativeJIT::jumpForTypedArrayIsNeuteredIfOutOfBounds): |
| (JSC::DFG::SpeculativeJIT::compileGetIndexedPropertyStorage): |
| (JSC::DFG::SpeculativeJIT::compileGetTypedArrayByteOffset): |
| (JSC::DFG::SpeculativeJIT::compileNewTypedArrayWithSize): |
| * ftl/FTLAbstractHeapRepository.h: |
| * ftl/FTLLowerDFGToB3.cpp: |
| (JSC::FTL::DFG::LowerDFGToB3::compileGetIndexedPropertyStorage): |
| (JSC::FTL::DFG::LowerDFGToB3::compileGetTypedArrayByteOffset): |
| (JSC::FTL::DFG::LowerDFGToB3::compileNewTypedArray): |
| (JSC::FTL::DFG::LowerDFGToB3::speculateTypedArrayIsNotNeutered): |
| (JSC::FTL::DFG::LowerDFGToB3::cagedMayBeNull): Deleted. |
| * jit/IntrinsicEmitter.cpp: |
| (JSC::IntrinsicGetterAccessCase::emitIntrinsicGetter): |
| * jit/JITPropertyAccess.cpp: |
| (JSC::JIT::emitIntTypedArrayGetByVal): |
| (JSC::JIT::emitFloatTypedArrayGetByVal): |
| (JSC::JIT::emitIntTypedArrayPutByVal): |
| (JSC::JIT::emitFloatTypedArrayPutByVal): |
| * llint/LowLevelInterpreter.asm: |
| * llint/LowLevelInterpreter64.asm: |
| * offlineasm/arm64.rb: |
| * offlineasm/x86.rb: |
| * runtime/CagedBarrierPtr.h: |
| * runtime/JSArrayBufferView.cpp: |
| (JSC::JSArrayBufferView::JSArrayBufferView): |
| (JSC::JSArrayBufferView::finalize): |
| (JSC::JSArrayBufferView::neuter): |
| * runtime/JSArrayBufferView.h: |
| (JSC::JSArrayBufferView::vector const): |
| (JSC::JSArrayBufferView::offsetOfPoisonedVector): |
| (JSC::JSArrayBufferView::poisonFor): |
| (JSC::JSArrayBufferView::Poison::key): |
| (JSC::JSArrayBufferView::offsetOfVector): Deleted. |
| * runtime/JSCPoison.cpp: |
| (JSC::initializePoison): |
| * runtime/JSCPoison.h: |
| * runtime/JSGenericTypedArrayViewInlines.h: |
| (JSC::JSGenericTypedArrayView<Adaptor>::estimatedSize): |
| (JSC::JSGenericTypedArrayView<Adaptor>::visitChildren): |
| (JSC::JSGenericTypedArrayView<Adaptor>::slowDownAndWasteMemory): |
| * runtime/JSObject.h: |
| |
| 2018-01-30 Fujii Hironori <Hironori.Fujii@sony.com> |
| |
| [Win] Warning fix. |
| https://bugs.webkit.org/show_bug.cgi?id=177007 |
| |
| Reviewed by Yusuke Suzuki. |
| |
| * interpreter/StackVisitor.cpp: |
| (JSC::StackVisitor::Frame::dump const): |
| Changed the type of locationRawBits from unsigned to uintptr_t. |
| * runtime/IntlNumberFormat.cpp: |
| (JSC::IntlNumberFormat::createNumberFormat): |
| Initialize 'style' to avoid potentially uninitialized local variable warning. |
| |
| 2018-01-29 Yusuke Suzuki <utatane.tea@gmail.com> |
| |
| [JSC] Implement trimStart and trimEnd |
| https://bugs.webkit.org/show_bug.cgi?id=182233 |
| |
| Reviewed by Mark Lam. |
| |
| String.prototype.{trimStart,trimEnd} are now stage 3[1]. |
| String.prototype.{trimLeft,trimRight} are alias to these functions. |
| |
| We rename these functions to trimStart and trimEnd, and put them as |
| trimLeft and trimRight too. |
| |
| [1]: https://tc39.github.io/proposal-string-left-right-trim/ |
| |
| * runtime/StringPrototype.cpp: |
| (JSC::StringPrototype::finishCreation): |
| (JSC::trimString): |
| (JSC::stringProtoFuncTrim): |
| (JSC::stringProtoFuncTrimStart): |
| (JSC::stringProtoFuncTrimEnd): |
| (JSC::stringProtoFuncTrimLeft): Deleted. |
| (JSC::stringProtoFuncTrimRight): Deleted. |
| |
| 2018-01-29 Yusuke Suzuki <utatane.tea@gmail.com> |
| |
| [JSC] Relax line terminators in String to make JSON subset of JS |
| https://bugs.webkit.org/show_bug.cgi?id=182232 |
| |
| Reviewed by Keith Miller. |
| |
| "Subsume JSON" spec is now stage 3[1]. Before this spec change, |
| JSON can accept \u2028 / \u2029 in string while JS cannot do that. |
| It accidentally made JSON non subset of JS. |
| |
| Now we extend our JS string to accept \u2028 / \u2029 to make JSON |
| subset of JS in this spec change. |
| |
| [1]: https://github.com/tc39/proposal-json-superset |
| |
| * parser/Lexer.cpp: |
| (JSC::Lexer<T>::parseStringSlowCase): |
| |
| 2018-01-29 Jiewen Tan <jiewen_tan@apple.com> |
| |
| [WebAuthN] Add a compile-time feature flag |
| https://bugs.webkit.org/show_bug.cgi?id=182211 |
| <rdar://problem/36936365> |
| |
| Reviewed by Brent Fulgham. |
| |
| * Configurations/FeatureDefines.xcconfig: |
| |
| 2018-01-29 Michael Saboff <msaboff@apple.com> |
| |
| REGRESSION (r227341): DFG_ASSERT failure at JSC::DFG::AtTailAbstractState::forNode() |
| https://bugs.webkit.org/show_bug.cgi?id=182249 |
| |
| Reviewed by Keith Miller. |
| |
| Changed clobberize() handling of CompareEq, et al to properly handle comparisons between |
| Untyped and Object values when compared against built in types. Such comparisons can |
| invoke toNumber() or other methods. |
| |
| * dfg/DFGClobberize.h: |
| (JSC::DFG::clobberize): |
| |
| 2018-01-29 Matt Lewis <jlewis3@apple.com> |
| |
| Unreviewed, rolling out r227725. |
| |
| This caused internal failures. |
| |
| Reverted changeset: |
| |
| "JSC Sampling Profiler: Detect tester and testee when sampling |
| in RegExp JIT" |
| https://bugs.webkit.org/show_bug.cgi?id=152729 |
| https://trac.webkit.org/changeset/227725 |
| |
| 2018-01-29 Yusuke Suzuki <utatane.tea@gmail.com> |
| |
| JSC Sampling Profiler: Detect tester and testee when sampling in RegExp JIT |
| https://bugs.webkit.org/show_bug.cgi?id=152729 |
| |
| Reviewed by Saam Barati. |
| |
| This patch extends SamplingProfiler to recognize JIT RegExp execution. We record |
| executing RegExp in VM so that SamplingProfiler can detect it. This is better |
| than the previous VM::isExecutingInRegExpJIT flag approach since |
| |
| 1. isExecutingInRegExpJIT is set after starting executing JIT RegExp code. Thus, |
| if we suspend the thread just before executing this flag, or just after clearing |
| this flag, SamplingProfiler gets invalid frame, and frame validation fails. We |
| should set such a flag before and after executing JIT RegExp code. |
| |
| 2. This removes VM dependency from YarrJIT which is not essential one. |
| |
| We add ExecutionContext enum to RegExp::matchInline not to mark execution if it |
| is done in non JS thread. |
| |
| * bytecode/BytecodeDumper.cpp: |
| (JSC::regexpName): |
| (JSC::BytecodeDumper<Block>::dumpRegExps): |
| (JSC::regexpToSourceString): Deleted. |
| * heap/Heap.cpp: |
| (JSC::Heap::addCoreConstraints): |
| * runtime/RegExp.cpp: |
| (JSC::RegExp::compile): |
| (JSC::RegExp::match): |
| (JSC::RegExp::matchConcurrently): |
| (JSC::RegExp::compileMatchOnly): |
| (JSC::RegExp::toSourceString const): |
| * runtime/RegExp.h: |
| * runtime/RegExpInlines.h: |
| (JSC::RegExp::matchInline): |
| * runtime/RegExpMatchesArray.h: |
| (JSC::createRegExpMatchesArray): |
| * runtime/SamplingProfiler.cpp: |
| (JSC::SamplingProfiler::SamplingProfiler): |
| (JSC::SamplingProfiler::timerLoop): |
| (JSC::SamplingProfiler::takeSample): |
| (JSC::SamplingProfiler::processUnverifiedStackTraces): |
| (JSC::SamplingProfiler::StackFrame::nameFromCallee): |
| (JSC::SamplingProfiler::StackFrame::displayName): |
| (JSC::SamplingProfiler::StackFrame::displayNameForJSONTests): |
| (JSC::SamplingProfiler::StackFrame::functionStartLine): |
| (JSC::SamplingProfiler::StackFrame::functionStartColumn): |
| (JSC::SamplingProfiler::StackFrame::sourceID): |
| (JSC::SamplingProfiler::StackFrame::url): |
| (WTF::printInternal): |
| (JSC::SamplingProfiler::~SamplingProfiler): Deleted. |
| * runtime/SamplingProfiler.h: |
| * runtime/VM.h: |
| * yarr/YarrJIT.cpp: |
| (JSC::Yarr::YarrGenerator::generateEnter): |
| (JSC::Yarr::YarrGenerator::generateReturn): |
| (JSC::Yarr::YarrGenerator::YarrGenerator): |
| (JSC::Yarr::jitCompile): |
| * yarr/YarrJIT.h: |
| |
| 2018-01-29 Yusuke Suzuki <utatane.tea@gmail.com> |
| |
| [DFG][FTL] WeakMap#set should have DFG node |
| https://bugs.webkit.org/show_bug.cgi?id=180015 |
| |
| Reviewed by Saam Barati. |
| |
| This patch adds WeakMapSet and WeakSetAdd DFG nodes to handle them efficiently in DFG and FTL. |
| We also define CSE rules for them. Now, WeakMapSet and WeakSetAdd can offer the results of |
| the subsequent WeakMapGet if CSE allows. |
| |
| * dfg/DFGAbstractInterpreterInlines.h: |
| (JSC::DFG::AbstractInterpreter<AbstractStateType>::executeEffects): |
| * dfg/DFGByteCodeParser.cpp: |
| (JSC::DFG::ByteCodeParser::addVarArgChild): |
| (JSC::DFG::ByteCodeParser::handleIntrinsicCall): |
| * dfg/DFGClobberize.h: |
| (JSC::DFG::clobberize): |
| * dfg/DFGDoesGC.cpp: |
| (JSC::DFG::doesGC): |
| WeakMap operations do not cause GC. |
| |
| * dfg/DFGFixupPhase.cpp: |
| (JSC::DFG::FixupPhase::fixupNode): |
| * dfg/DFGNodeType.h: |
| * dfg/DFGOperations.cpp: |
| * dfg/DFGOperations.h: |
| * dfg/DFGPredictionPropagationPhase.cpp: |
| * dfg/DFGSafeToExecute.h: |
| (JSC::DFG::safeToExecute): |
| * dfg/DFGSpeculativeJIT.cpp: |
| (JSC::DFG::SpeculativeJIT::compileWeakSetAdd): |
| (JSC::DFG::SpeculativeJIT::compileWeakMapSet): |
| * dfg/DFGSpeculativeJIT.h: |
| (JSC::DFG::SpeculativeJIT::callOperation): |
| * dfg/DFGSpeculativeJIT32_64.cpp: |
| (JSC::DFG::SpeculativeJIT::compile): |
| * dfg/DFGSpeculativeJIT64.cpp: |
| (JSC::DFG::SpeculativeJIT::compile): |
| * ftl/FTLCapabilities.cpp: |
| (JSC::FTL::canCompile): |
| * ftl/FTLLowerDFGToB3.cpp: |
| (JSC::FTL::DFG::LowerDFGToB3::compileNode): |
| (JSC::FTL::DFG::LowerDFGToB3::compileWeakSetAdd): |
| (JSC::FTL::DFG::LowerDFGToB3::compileWeakMapSet): |
| * jit/JITOperations.h: |
| * runtime/Intrinsic.cpp: |
| (JSC::intrinsicName): |
| * runtime/Intrinsic.h: |
| * runtime/WeakMapPrototype.cpp: |
| (JSC::WeakMapPrototype::finishCreation): |
| * runtime/WeakSetPrototype.cpp: |
| (JSC::WeakSetPrototype::finishCreation): |
| |
| 2018-01-28 Filip Pizlo <fpizlo@apple.com> |
| |
| LargeAllocation should do the same distancing as MarkedBlock |
| https://bugs.webkit.org/show_bug.cgi?id=182226 |
| |
| Reviewed by Saam Barati. |
| |
| This makes LargeAllocation do the same exact distancing that MarkedBlock promises to do. |
| |
| To make that possible, this patch first makes MarkedBlock know exactly how much distancing it |
| is doing: |
| |
| - I've rationalized the payloadSize calculation. In particular, I made MarkedSpace use the |
| calculation done in MarkedBlock. MarkedSpace used to do the math a different way. This |
| keeps the old way just for a static_assert. |
| |
| - The promised amount of distancing is now codified in HeapCell.h as |
| minimumDistanceBetweenCellsFromDifferentOrigins. We assert that the footer size is at least |
| as big as this. I didn't want to just use footer size for this constant because then, if |
| you increased the size of the footer, you'd also add padding to every large allocation. |
| |
| Then this patch just adds minimumDistanceBetweenCellsFromDifferentOrigins to each large |
| allocation. It also zeroes that slice of memory to prevent any information leaks that way. |
| |
| This is perf neutral. Large allocations start out at ~8000 bytes. The amount of padding is |
| ~300 bytes. That's 3.75% space overhead for objects that are ~8000 bytes, zero overhead for |
| smaller objects, and diminishing overhead for larger objects. We allocate very few large |
| objects, so we shouldn't have any real space overhead from this. |
| |
| * heap/HeapCell.h: |
| * heap/LargeAllocation.cpp: |
| (JSC::LargeAllocation::tryCreate): |
| * heap/MarkedBlock.h: |
| * heap/MarkedSpace.h: |
| |
| 2018-01-27 Filip Pizlo <fpizlo@apple.com> |
| |
| Make MarkedBlock::Footer bigger |
| https://bugs.webkit.org/show_bug.cgi?id=182220 |
| |
| Reviewed by JF Bastien. |
| |
| This makes the block footer larger by moving the newlyAllocated bits from the handle into |
| the footer. |
| |
| It used to be profitable to put anything we could into the handle because that would free up |
| payload space inside the block. But now that we want to use the footer for padding, it's |
| profitable to put GC state information - especially data that is used by the GC itself and so |
| is not useful for a Spectre attack - into the footer to increase object distancing. |
| |
| * heap/CellContainer.cpp: |
| (JSC::CellContainer::isNewlyAllocated const): |
| * heap/IsoCellSet.cpp: |
| (JSC::IsoCellSet::sweepToFreeList): |
| * heap/MarkedBlock.cpp: |
| (JSC::MarkedBlock::Handle::Handle): |
| (JSC::MarkedBlock::Footer::Footer): |
| (JSC::MarkedBlock::Handle::stopAllocating): |
| (JSC::MarkedBlock::Handle::lastChanceToFinalize): |
| (JSC::MarkedBlock::Handle::resumeAllocating): |
| (JSC::MarkedBlock::aboutToMarkSlow): |
| (JSC::MarkedBlock::resetAllocated): |
| (JSC::MarkedBlock::Handle::resetAllocated): Deleted. |
| * heap/MarkedBlock.h: |
| (JSC::MarkedBlock::newlyAllocatedVersion const): |
| (JSC::MarkedBlock::isNewlyAllocated): |
| (JSC::MarkedBlock::setNewlyAllocated): |
| (JSC::MarkedBlock::clearNewlyAllocated): |
| (JSC::MarkedBlock::newlyAllocated const): |
| (JSC::MarkedBlock::Handle::newlyAllocatedVersion const): Deleted. |
| (JSC::MarkedBlock::Handle::isNewlyAllocated): Deleted. |
| (JSC::MarkedBlock::Handle::setNewlyAllocated): Deleted. |
| (JSC::MarkedBlock::Handle::clearNewlyAllocated): Deleted. |
| (JSC::MarkedBlock::Handle::newlyAllocated const): Deleted. |
| * heap/MarkedBlockInlines.h: |
| (JSC::MarkedBlock::isNewlyAllocatedStale const): |
| (JSC::MarkedBlock::hasAnyNewlyAllocated): |
| (JSC::MarkedBlock::Handle::isLive): |
| (JSC::MarkedBlock::Handle::specializedSweep): |
| (JSC::MarkedBlock::Handle::newlyAllocatedMode): |
| (JSC::MarkedBlock::Handle::isNewlyAllocatedStale const): Deleted. |
| (JSC::MarkedBlock::Handle::hasAnyNewlyAllocated): Deleted. |
| * heap/MarkedSpace.cpp: |
| (JSC::MarkedSpace::endMarking): |
| * heap/SlotVisitor.cpp: |
| (JSC::SlotVisitor::appendJSCellOrAuxiliary): |
| |
| 2018-01-27 Filip Pizlo <fpizlo@apple.com> |
| |
| MarkedBlock should have a footer instead of a header |
| https://bugs.webkit.org/show_bug.cgi?id=182217 |
| |
| Reviewed by JF Bastien. |
| |
| This moves the MarkedBlock's meta-data from the header to the footer. This doesn't really |
| change anything except for some compile-time constants, so it should not affect performance. |
| |
| This change is to help protect against Spectre attacks on structure checks, which allow for |
| small-offset out-of-bounds access. By putting the meta-data at the end of the block, small |
| OOBs will only get to other objects in the same block or the block footer. The block footer |
| is not super interesting. So, if we combine this with the TLC change (r227617), this means we |
| can use blocks as the mechanism of achieving distance between objects from different origins. |
| We just need to avoid ever putting objects from different origins in the same block. That's |
| what bug 181636 is about. |
| |
| * heap/BlockDirectory.cpp: |
| (JSC::blockHeaderSize): Deleted. |
| (JSC::BlockDirectory::blockSizeForBytes): Deleted. |
| * heap/BlockDirectory.h: |
| * heap/HeapUtil.h: |
| (JSC::HeapUtil::findGCObjectPointersForMarking): |
| * heap/MarkedBlock.cpp: |
| (JSC::MarkedBlock::MarkedBlock): |
| (JSC::MarkedBlock::~MarkedBlock): |
| (JSC::MarkedBlock::Footer::Footer): |
| (JSC::MarkedBlock::Footer::~Footer): |
| (JSC::MarkedBlock::Handle::stopAllocating): |
| (JSC::MarkedBlock::Handle::lastChanceToFinalize): |
| (JSC::MarkedBlock::Handle::resumeAllocating): |
| (JSC::MarkedBlock::aboutToMarkSlow): |
| (JSC::MarkedBlock::resetMarks): |
| (JSC::MarkedBlock::assertMarksNotStale): |
| (JSC::MarkedBlock::Handle::didConsumeFreeList): |
| (JSC::MarkedBlock::markCount): |
| (JSC::MarkedBlock::clearHasAnyMarked): |
| (JSC::MarkedBlock::Handle::didAddToDirectory): |
| (JSC::MarkedBlock::Handle::didRemoveFromDirectory): |
| (JSC::MarkedBlock::Handle::sweep): |
| * heap/MarkedBlock.h: |
| (JSC::MarkedBlock::markingVersion const): |
| (JSC::MarkedBlock::lock): |
| (JSC::MarkedBlock::subspace const): |
| (JSC::MarkedBlock::footer): |
| (JSC::MarkedBlock::footer const): |
| (JSC::MarkedBlock::handle): |
| (JSC::MarkedBlock::handle const): |
| (JSC::MarkedBlock::Handle::blockFooter): |
| (JSC::MarkedBlock::isAtomAligned): |
| (JSC::MarkedBlock::Handle::cellAlign): |
| (JSC::MarkedBlock::blockFor): |
| (JSC::MarkedBlock::vm const): |
| (JSC::MarkedBlock::weakSet): |
| (JSC::MarkedBlock::cellSize): |
| (JSC::MarkedBlock::attributes const): |
| (JSC::MarkedBlock::atomNumber): |
| (JSC::MarkedBlock::areMarksStale): |
| (JSC::MarkedBlock::aboutToMark): |
| (JSC::MarkedBlock::isMarkedRaw): |
| (JSC::MarkedBlock::isMarked): |
| (JSC::MarkedBlock::testAndSetMarked): |
| (JSC::MarkedBlock::marks const): |
| (JSC::MarkedBlock::isAtom): |
| (JSC::MarkedBlock::Handle::forEachCell): |
| (JSC::MarkedBlock::hasAnyMarked const): |
| (JSC::MarkedBlock::noteMarked): |
| (WTF::MarkedBlockHash::hash): |
| (JSC::MarkedBlock::firstAtom): Deleted. |
| * heap/MarkedBlockInlines.h: |
| (JSC::MarkedBlock::marksConveyLivenessDuringMarking): |
| (JSC::MarkedBlock::Handle::isLive): |
| (JSC::MarkedBlock::Handle::specializedSweep): |
| (JSC::MarkedBlock::Handle::forEachLiveCell): |
| (JSC::MarkedBlock::Handle::forEachDeadCell): |
| (JSC::MarkedBlock::Handle::forEachMarkedCell): |
| * heap/MarkedSpace.cpp: |
| * heap/MarkedSpace.h: |
| * llint/LowLevelInterpreter.asm: |
| * llint/LowLevelInterpreter32_64.asm: |
| * llint/LowLevelInterpreter64.asm: |
| |
| 2018-01-27 Yusuke Suzuki <utatane.tea@gmail.com> |
| |
| DFG strength reduction fails to convert NumberToStringWithValidRadixConstant for 0 to constant '0' |
| https://bugs.webkit.org/show_bug.cgi?id=182213 |
| |
| Reviewed by Mark Lam. |
| |
| toStringWithRadixInternal is originally used for the slow path if the given value is larger than radix or negative. |
| As a result, it does not accept 0 correctly, and produces an empty string. Since DFGStrengthReductionPhase uses |
| this function, it accidentally converts NumberToStringWithValidRadixConstant(0, radix) to an empty string. |
| This patch fixes toStringWithRadixInternal to accept 0. This change fixes twitch.tv's issue. |
| |
| We also add a careful cast to avoid `-INT32_MIN`. It does not produce incorrect value in x86 in practice, |
| but it is UB, and a compiler may assume that the given value is never INT32_MIN and could do an incorrect optimization. |
| |
| * runtime/NumberPrototype.cpp: |
| (JSC::toStringWithRadixInternal): |
| |
| 2018-01-26 Saam Barati <sbarati@apple.com> |
| |
| Fix emitAllocateWithNonNullAllocator to work on arm |
| https://bugs.webkit.org/show_bug.cgi?id=182187 |
| <rdar://problem/36906550> |
| |
| Reviewed by Filip Pizlo. |
| |
| This patch unifies the x86 and ARM paths in emitAllocateWithNonNullAllocator |
| and makes it so that emitAllocateWithNonNullAllocator uses the macro scratch |
| register on ARM. |
| |
| * ftl/FTLLowerDFGToB3.cpp: |
| (JSC::FTL::DFG::LowerDFGToB3::allocateHeapCell): |
| * jit/AssemblyHelpers.cpp: |
| (JSC::AssemblyHelpers::emitAllocateWithNonNullAllocator): |
| |
| 2018-01-26 Joseph Pecoraro <pecoraro@apple.com> |
| |
| Rebaselining builtin generator tests after r227685. |
| |
| Unreviewed. |
| |
| * Scripts/tests/builtins/expected/JavaScriptCore-Builtin.Promise-Combined.js-result: |
| * Scripts/tests/builtins/expected/JavaScriptCore-Builtin.Promise-Separate.js-result: |
| * Scripts/tests/builtins/expected/JavaScriptCore-Builtin.prototype-Combined.js-result: |
| * Scripts/tests/builtins/expected/JavaScriptCore-Builtin.prototype-Separate.js-result: |
| * Scripts/tests/builtins/expected/JavaScriptCore-BuiltinConstructor-Combined.js-result: |
| * Scripts/tests/builtins/expected/JavaScriptCore-BuiltinConstructor-Separate.js-result: |
| * Scripts/tests/builtins/expected/JavaScriptCore-InternalClashingNames-Combined.js-result: |
| * Scripts/tests/builtins/expected/WebCore-AnotherGuardedInternalBuiltin-Separate.js-result: |
| * Scripts/tests/builtins/expected/WebCore-ArbitraryConditionalGuard-Separate.js-result: |
| * Scripts/tests/builtins/expected/WebCore-GuardedBuiltin-Separate.js-result: |
| * Scripts/tests/builtins/expected/WebCore-GuardedInternalBuiltin-Separate.js-result: |
| * Scripts/tests/builtins/expected/WebCore-UnguardedBuiltin-Separate.js-result: |
| * Scripts/tests/builtins/expected/WebCore-xmlCasingTest-Separate.js-result: |
| It used to be that the builtins generator was minifying by default. That was an accident |
| and we now only minify on Release builds. The generator tests are now getting the |
| default unminified output behavior so they need to update their expectations |
| for some extra whitespace. |
| |
| 2018-01-26 Mark Lam <mark.lam@apple.com> |
| |
| We should only append ParserArenaDeletable pointers to ParserArena::m_deletableObjects. |
| https://bugs.webkit.org/show_bug.cgi?id=182180 |
| <rdar://problem/36460697> |
| |
| Reviewed by Michael Saboff. |
| |
| Some parser Node subclasses extend ParserArenaDeletable via multiple inheritance, |
| but not as the Node's first base class. ParserArena::m_deletableObjects is |
| expecting pointers to objects of the shape of ParserArenaDeletable. We ensure |
| this by allocating the Node subclass, and casting it to ParserArenaDeletable to |
| get the correct pointer to append to ParserArena::m_deletableObjects. |
| |
| To simplify things, we introduce a JSC_MAKE_PARSER_ARENA_DELETABLE_ALLOCATED |
| (analogous to WTF_MAKE_FAST_ALLOCATED) for use in Node subclasses that extends |
| ParserArenaDeletable. |
| |
| * parser/NodeConstructors.h: |
| (JSC::ParserArenaDeletable::operator new): |
| * parser/Nodes.h: |
| * parser/ParserArena.h: |
| (JSC::ParserArena::allocateDeletable): |
| |
| 2018-01-26 Joseph Pecoraro <pecoraro@apple.com> |
| |
| JavaScriptCore builtins should be partially minified in Release builds not Debug builds |
| https://bugs.webkit.org/show_bug.cgi?id=182165 |
| |
| Reviewed by Keith Miller. |
| |
| * Scripts/builtins/builtins_model.py: |
| (BuiltinFunction.fromString): |
| Apply minifications on Release builds instead of Debug builds. |
| Also eliminate leading whitespace. |
| |
| 2018-01-26 Filip Pizlo <fpizlo@apple.com> |
| |
| Disable TLS-based TLCs |
| https://bugs.webkit.org/show_bug.cgi?id=182175 |
| |
| Reviewed by Saam Barati. |
| |
| Check for the new USE(FAST_TLS_FOR_TLC) flag instead of just ENABLE(FAST_TLS_JIT). |
| |
| * heap/BlockDirectory.cpp: |
| (JSC::BlockDirectory::~BlockDirectory): |
| * heap/BlockDirectory.h: |
| * heap/ThreadLocalCache.cpp: |
| (JSC::ThreadLocalCache::installSlow): |
| (JSC::ThreadLocalCache::installData): |
| * heap/ThreadLocalCache.h: |
| * heap/ThreadLocalCacheInlines.h: |
| (JSC::ThreadLocalCache::getImpl): |
| * jit/AssemblyHelpers.cpp: |
| (JSC::AssemblyHelpers::emitAllocateWithNonNullAllocator): |
| * runtime/VM.cpp: |
| (JSC::VM::~VM): |
| * runtime/VM.h: |
| |
| 2018-01-25 Yusuke Suzuki <utatane.tea@gmail.com> |
| |
| imported/w3c/web-platform-tests/html/semantics/scripting-1/the-script-element/module/errorhandling.html crashes |
| https://bugs.webkit.org/show_bug.cgi?id=181980 |
| |
| Reviewed by Ryosuke Niwa. |
| |
| We accidentally failed to propagate errored promise in instantiate and satify phase if entry.{instantiate,satisfy} |
| promises are set. Since we just returned `entry`, it becomes succeeded promise even if the dependent fetch, instantiate, |
| and satisfy promises are failed. This patch fixes error propagation by returning `entry.instantiate` and `entry.satisfy` |
| correctly. |
| |
| * builtins/ModuleLoaderPrototype.js: |
| (requestInstantiate): |
| (requestSatisfy): |
| |
| 2018-01-25 Mark Lam <mark.lam@apple.com> |
| |
| Gardening: fix 32-bit build after r227643. |
| https://bugs.webkit.org/show_bug.cgi?id=182086 |
| |
| Not reviewed. |
| |
| * jit/AssemblyHelpers.cpp: |
| (JSC::AssemblyHelpers::emitDynamicPoisonOnLoadedType): |
| |
| 2018-01-24 Filip Pizlo <fpizlo@apple.com> |
| |
| DirectArguments should protect itself using dynamic poisoning and precise index masking |
| https://bugs.webkit.org/show_bug.cgi?id=182086 |
| |
| Reviewed by Saam Barati. |
| |
| This implements dynamic poisoning and precise index masking in DirectArguments, using the |
| helpers from <wtf/MathExtras.h> and helpers in AssemblyHelpers and FTL::LowerDFGToB3. |
| |
| We use dynamic poisoning for DirectArguments since this object did not have any additional |
| indirection inside it that could have been poisoned. So, we use the xor of the expected type |
| and the actual type as an additional input into the pointer. |
| |
| We use precise index masking for bounds checks, because it's not worth doing index masking |
| unless we know that precise index masking is too slow. |
| |
| * assembler/MacroAssembler.h: |
| (JSC::MacroAssembler::lshiftPtr): |
| (JSC::MacroAssembler::rshiftPtr): |
| * dfg/DFGSpeculativeJIT.cpp: |
| (JSC::DFG::SpeculativeJIT::compileGetByValOnDirectArguments): |
| * ftl/FTLLowerDFGToB3.cpp: |
| (JSC::FTL::DFG::LowerDFGToB3::compileGetByVal): |
| (JSC::FTL::DFG::LowerDFGToB3::compileGetMyArgumentByVal): |
| (JSC::FTL::DFG::LowerDFGToB3::preciseIndexMask64): |
| (JSC::FTL::DFG::LowerDFGToB3::preciseIndexMask32): |
| (JSC::FTL::DFG::LowerDFGToB3::dynamicPoison): |
| (JSC::FTL::DFG::LowerDFGToB3::dynamicPoisonOnLoadedType): |
| (JSC::FTL::DFG::LowerDFGToB3::dynamicPoisonOnType): |
| * jit/AssemblyHelpers.cpp: |
| (JSC::AssemblyHelpers::emitPreciseIndexMask32): |
| (JSC::AssemblyHelpers::emitDynamicPoison): |
| (JSC::AssemblyHelpers::emitDynamicPoisonOnLoadedType): |
| (JSC::AssemblyHelpers::emitDynamicPoisonOnType): |
| * jit/AssemblyHelpers.h: |
| * jit/JITPropertyAccess.cpp: |
| (JSC::JIT::emitDirectArgumentsGetByVal): |
| * runtime/DirectArguments.h: |
| (JSC::DirectArguments::getIndexQuickly const): |
| (JSC::DirectArguments::setIndexQuickly): |
| (JSC::DirectArguments::argument): |
| * runtime/GenericArgumentsInlines.h: |
| |
| 2018-01-25 Mark Lam <mark.lam@apple.com> |
| |
| Rename some local vars from type to typedArrayType for greater clarity. |
| https://bugs.webkit.org/show_bug.cgi?id=182148 |
| <rdar://problem/36882310> |
| |
| Reviewed by Saam Barati. |
| |
| * dfg/DFGSpeculativeJIT.cpp: |
| (JSC::DFG::SpeculativeJIT::compileNewTypedArrayWithSize): |
| * ftl/FTLLowerDFGToB3.cpp: |
| (JSC::FTL::DFG::LowerDFGToB3::compileNewTypedArray): |
| |
| 2018-01-25 Filip Pizlo <fpizlo@apple.com> |
| |
| JSC GC should support TLCs (thread local caches) |
| https://bugs.webkit.org/show_bug.cgi?id=181559 |
| |
| Reviewed by Mark Lam and Saam Barati. |
| |
| This is a big step towards object distancing by site origin. This patch implements TLCs, or |
| thread-local caches, which allow each thread to allocate from its own free lists. It also |
| means that any given thread can context-switch TLCs. This will allow us to do separate |
| allocation for separate site origins. Eventually, once we reshape how MarkedBlock looks, this |
| will allow us to have a hard distancing constraint between objects from different origins. |
| |
| In this new design, every "size class" is represented as a BlockDirectory (formerly known as |
| MarkedAllocator, prior to r226822). This contains a bag of blocks allocated using some |
| aligned memory allocator (which roughly represents which cage you came out of), and anyone |
| using the same allocator can share those blocks - but so long as they are in that |
| BlockDirectory, they will have the size and type of that directory. Previously, each |
| BlockDirectory had exactly one FreeList. Now, each BlockDirectory has a double-linked-list of |
| LocalAllocators, each of which has a FreeList. |
| |
| To decide which LocalAllocator to allocate out of, we need a ThreadLocalCache and a |
| BlockDirectory. The directory gives us an offset-within-the-ThreadLocalCache, which we simply |
| call the Allocator (which is just a POD type that contains a 32-bit offset). Each allocation |
| starts by figuring out what Allocator it wants (often we have this information at JIT time). |
| Then the allocation loads its ThreadLocalCache::Data from a fast TLS slot. Then we add the |
| Allocator offset to the ThreadLocalCache::Data to get the LocalAllocator. Note that we use |
| offsets as opposed to indices to make it easy to do the math on each allocation (if |
| LocalAllocator had a weird size then every allocation would have to do an imul). |
| |
| This is a definite slow-down on GC-heavy benchmarks, but by a small margin, and only on |
| unusually heavy tests. For example, boyer and splay are both 3% regressed, but the Octane |
| geomean is just fine. The JetStream score regressed by 0.5% with p = 0.08 (so maybe there is |
| something there, but it's not significant according to our threshold). |
| |
| Relanding after fixing ARM64 bug in AssemblyHelpers::emitAllocateWithNonNullAllocator(). That |
| function needs to be careful to avoid using the scratch register because the FTL will call it |
| in disallow-scratch-register mode. |
| |
| * JavaScriptCore.xcodeproj/project.pbxproj: |
| * Sources.txt: |
| * b3/B3LowerToAir.cpp: |
| * b3/B3PatchpointSpecial.cpp: |
| (JSC::B3::PatchpointSpecial::admitsStack): |
| * b3/B3StackmapSpecial.cpp: |
| (JSC::B3::StackmapSpecial::forEachArgImpl): |
| (JSC::B3::StackmapSpecial::isArgValidForRep): |
| * b3/B3StackmapValue.cpp: |
| (JSC::B3::StackmapValue::appendSomeRegisterWithClobber): |
| * b3/B3StackmapValue.h: |
| * b3/B3Validate.cpp: |
| * b3/B3ValueRep.cpp: |
| (JSC::B3::ValueRep::addUsedRegistersTo const): |
| (JSC::B3::ValueRep::dump const): |
| (WTF::printInternal): |
| * b3/B3ValueRep.h: |
| (JSC::B3::ValueRep::ValueRep): |
| * bytecode/AccessCase.cpp: |
| (JSC::AccessCase::generateImpl): |
| * bytecode/ObjectAllocationProfile.h: |
| (JSC::ObjectAllocationProfile::ObjectAllocationProfile): |
| (JSC::ObjectAllocationProfile::clear): |
| * bytecode/ObjectAllocationProfileInlines.h: |
| (JSC::ObjectAllocationProfile::initializeProfile): |
| * dfg/DFGSpeculativeJIT.cpp: |
| (JSC::DFG::SpeculativeJIT::emitAllocateRawObject): |
| (JSC::DFG::SpeculativeJIT::compileMakeRope): |
| (JSC::DFG::SpeculativeJIT::compileAllocatePropertyStorage): |
| (JSC::DFG::SpeculativeJIT::compileReallocatePropertyStorage): |
| (JSC::DFG::SpeculativeJIT::compileCreateThis): |
| (JSC::DFG::SpeculativeJIT::compileNewObject): |
| * dfg/DFGSpeculativeJIT.h: |
| (JSC::DFG::SpeculativeJIT::emitAllocateJSCell): |
| (JSC::DFG::SpeculativeJIT::emitAllocateJSObject): |
| * ftl/FTLAbstractHeapRepository.h: |
| * ftl/FTLLowerDFGToB3.cpp: |
| (JSC::FTL::DFG::LowerDFGToB3::compileMakeRope): |
| (JSC::FTL::DFG::LowerDFGToB3::compileMaterializeNewObject): |
| (JSC::FTL::DFG::LowerDFGToB3::allocatePropertyStorageWithSizeImpl): |
| (JSC::FTL::DFG::LowerDFGToB3::allocateHeapCell): |
| (JSC::FTL::DFG::LowerDFGToB3::allocateObject): |
| (JSC::FTL::DFG::LowerDFGToB3::allocatorForSize): |
| (JSC::FTL::DFG::LowerDFGToB3::allocateVariableSizedObject): |
| (JSC::FTL::DFG::LowerDFGToB3::allocateVariableSizedCell): |
| * heap/Allocator.cpp: Added. |
| (JSC::Allocator::cellSize const): |
| * heap/Allocator.h: Added. |
| (JSC::Allocator::Allocator): |
| (JSC::Allocator::offset const): |
| (JSC::Allocator::operator== const): |
| (JSC::Allocator::operator!= const): |
| (JSC::Allocator::operator bool const): |
| * heap/AllocatorInlines.h: Added. |
| (JSC::Allocator::allocate const): |
| (JSC::Allocator::tryAllocate const): |
| * heap/BlockDirectory.cpp: |
| (JSC::BlockDirectory::BlockDirectory): |
| (JSC::BlockDirectory::findBlockForAllocation): |
| (JSC::BlockDirectory::stopAllocating): |
| (JSC::BlockDirectory::prepareForAllocation): |
| (JSC::BlockDirectory::stopAllocatingForGood): |
| (JSC::BlockDirectory::resumeAllocating): |
| (JSC::BlockDirectory::endMarking): |
| (JSC::BlockDirectory::isFreeListedCell): |
| (JSC::BlockDirectory::didConsumeFreeList): Deleted. |
| (JSC::BlockDirectory::tryAllocateWithoutCollecting): Deleted. |
| (JSC::BlockDirectory::allocateIn): Deleted. |
| (JSC::BlockDirectory::tryAllocateIn): Deleted. |
| (JSC::BlockDirectory::doTestCollectionsIfNeeded): Deleted. |
| (JSC::BlockDirectory::allocateSlowCase): Deleted. |
| * heap/BlockDirectory.h: |
| (JSC::BlockDirectory::cellKind const): |
| (JSC::BlockDirectory::allocator const): |
| (JSC::BlockDirectory::freeList const): Deleted. |
| (JSC::BlockDirectory::offsetOfFreeList): Deleted. |
| (JSC::BlockDirectory::offsetOfCellSize): Deleted. |
| * heap/BlockDirectoryInlines.h: |
| (JSC::BlockDirectory::isFreeListedCell const): Deleted. |
| (JSC::BlockDirectory::allocate): Deleted. |
| * heap/CompleteSubspace.cpp: |
| (JSC::CompleteSubspace::CompleteSubspace): |
| (JSC::CompleteSubspace::allocatorFor): |
| (JSC::CompleteSubspace::allocate): |
| (JSC::CompleteSubspace::allocateNonVirtual): |
| (JSC::CompleteSubspace::allocatorForSlow): |
| (JSC::CompleteSubspace::allocateSlow): |
| (JSC::CompleteSubspace::tryAllocateSlow): |
| * heap/CompleteSubspace.h: |
| (JSC::CompleteSubspace::allocatorForSizeStep): |
| (JSC::CompleteSubspace::allocatorForNonVirtual): |
| * heap/FreeList.h: |
| * heap/GCDeferralContext.h: |
| * heap/Heap.cpp: |
| (JSC::Heap::Heap): |
| (JSC::Heap::lastChanceToFinalize): |
| * heap/Heap.h: |
| (JSC::Heap::threadLocalCacheLayout): |
| * heap/IsoCellSet.h: |
| * heap/IsoSubspace.cpp: |
| (JSC::IsoSubspace::IsoSubspace): |
| (JSC::IsoSubspace::allocatorFor): |
| (JSC::IsoSubspace::allocate): |
| (JSC::IsoSubspace::allocateNonVirtual): |
| * heap/IsoSubspace.h: |
| (JSC::IsoSubspace::allocatorForNonVirtual): |
| * heap/LocalAllocator.cpp: Added. |
| (JSC::LocalAllocator::LocalAllocator): |
| (JSC::LocalAllocator::reset): |
| (JSC::LocalAllocator::~LocalAllocator): |
| (JSC::LocalAllocator::stopAllocating): |
| (JSC::LocalAllocator::resumeAllocating): |
| (JSC::LocalAllocator::prepareForAllocation): |
| (JSC::LocalAllocator::stopAllocatingForGood): |
| (JSC::LocalAllocator::allocateSlowCase): |
| (JSC::LocalAllocator::didConsumeFreeList): |
| (JSC::LocalAllocator::tryAllocateWithoutCollecting): |
| (JSC::LocalAllocator::allocateIn): |
| (JSC::LocalAllocator::tryAllocateIn): |
| (JSC::LocalAllocator::doTestCollectionsIfNeeded): |
| (JSC::LocalAllocator::isFreeListedCell const): |
| * heap/LocalAllocator.h: Added. |
| (JSC::LocalAllocator::offsetOfFreeList): |
| (JSC::LocalAllocator::offsetOfCellSize): |
| * heap/LocalAllocatorInlines.h: Added. |
| (JSC::LocalAllocator::allocate): |
| * heap/MarkedSpace.cpp: |
| (JSC::MarkedSpace::stopAllocatingForGood): |
| * heap/MarkedSpace.h: |
| * heap/SlotVisitor.cpp: |
| * heap/SlotVisitor.h: |
| * heap/Subspace.h: |
| * heap/ThreadLocalCache.cpp: Added. |
| (JSC::ThreadLocalCache::create): |
| (JSC::ThreadLocalCache::ThreadLocalCache): |
| (JSC::ThreadLocalCache::~ThreadLocalCache): |
| (JSC::ThreadLocalCache::allocateData): |
| (JSC::ThreadLocalCache::destroyData): |
| (JSC::ThreadLocalCache::installSlow): |
| (JSC::ThreadLocalCache::installData): |
| (JSC::ThreadLocalCache::allocatorSlow): |
| (JSC::ThreadLocalCache::destructor): |
| * heap/ThreadLocalCache.h: Added. |
| (JSC::ThreadLocalCache::offsetOfSize): |
| (JSC::ThreadLocalCache::offsetOfFirstAllocator): |
| * heap/ThreadLocalCacheInlines.h: Added. |
| (JSC::ThreadLocalCache::getImpl): |
| (JSC::ThreadLocalCache::get): |
| (JSC::ThreadLocalCache::install): |
| (JSC::ThreadLocalCache::allocator): |
| (JSC::ThreadLocalCache::tryGetAllocator): |
| * heap/ThreadLocalCacheLayout.cpp: Added. |
| (JSC::ThreadLocalCacheLayout::ThreadLocalCacheLayout): |
| (JSC::ThreadLocalCacheLayout::~ThreadLocalCacheLayout): |
| (JSC::ThreadLocalCacheLayout::allocateOffset): |
| (JSC::ThreadLocalCacheLayout::snapshot): |
| (JSC::ThreadLocalCacheLayout::directory): |
| * heap/ThreadLocalCacheLayout.h: Added. |
| * jit/AssemblyHelpers.cpp: |
| (JSC::AssemblyHelpers::emitAllocateWithNonNullAllocator): |
| (JSC::AssemblyHelpers::emitAllocate): |
| (JSC::AssemblyHelpers::emitAllocateVariableSized): |
| * jit/AssemblyHelpers.h: |
| (JSC::AssemblyHelpers::vm): |
| (JSC::AssemblyHelpers::emitAllocateJSCell): |
| (JSC::AssemblyHelpers::emitAllocateJSObject): |
| (JSC::AssemblyHelpers::emitAllocateJSObjectWithKnownSize): |
| (JSC::AssemblyHelpers::emitAllocateWithNonNullAllocator): Deleted. |
| (JSC::AssemblyHelpers::emitAllocate): Deleted. |
| (JSC::AssemblyHelpers::emitAllocateVariableSized): Deleted. |
| * jit/JITOpcodes.cpp: |
| (JSC::JIT::emit_op_new_object): |
| (JSC::JIT::emit_op_create_this): |
| * jit/JITOpcodes32_64.cpp: |
| (JSC::JIT::emit_op_new_object): |
| (JSC::JIT::emit_op_create_this): |
| * runtime/ButterflyInlines.h: |
| (JSC::Butterfly::createUninitialized): |
| (JSC::Butterfly::tryCreate): |
| (JSC::Butterfly::growArrayRight): |
| * runtime/DirectArguments.cpp: |
| (JSC::DirectArguments::overrideThings): |
| * runtime/GenericArgumentsInlines.h: |
| (JSC::GenericArguments<Type>::initModifiedArgumentsDescriptor): |
| * runtime/HashMapImpl.h: |
| (JSC::HashMapBuffer::create): |
| * runtime/JSArray.cpp: |
| (JSC::JSArray::tryCreateUninitializedRestricted): |
| (JSC::JSArray::unshiftCountSlowCase): |
| * runtime/JSArray.h: |
| (JSC::JSArray::tryCreate): |
| * runtime/JSArrayBufferView.cpp: |
| (JSC::JSArrayBufferView::ConstructionContext::ConstructionContext): |
| * runtime/JSCellInlines.h: |
| (JSC::tryAllocateCellHelper): |
| * runtime/JSGlobalObject.cpp: |
| (JSC::JSGlobalObject::JSGlobalObject): |
| * runtime/JSGlobalObject.h: |
| (JSC::JSGlobalObject::threadLocalCache const): |
| * runtime/JSLock.cpp: |
| (JSC::JSLock::didAcquireLock): |
| * runtime/Options.h: |
| * runtime/RegExpMatchesArray.h: |
| (JSC::tryCreateUninitializedRegExpMatchesArray): |
| * runtime/VM.cpp: |
| (JSC::VM::VM): |
| * runtime/VM.h: |
| * runtime/VMEntryScope.cpp: |
| (JSC::VMEntryScope::VMEntryScope): |
| |
| 2018-01-25 Commit Queue <commit-queue@webkit.org> |
| |
| Unreviewed, rolling out r227592. |
| https://bugs.webkit.org/show_bug.cgi?id=182110 |
| |
| it made ARM64 (Linux and iOS) crash (Requested by pizlo-mbp on |
| #webkit). |
| |
| Reverted changeset: |
| |
| "JSC GC should support TLCs (thread local caches)" |
| https://bugs.webkit.org/show_bug.cgi?id=181559 |
| https://trac.webkit.org/changeset/227592 |
| |
| 2018-01-25 Alejandro G. Castro <alex@igalia.com> |
| |
| undefined reference to 'JSC::B3::BasicBlock::fallThrough() const |
| https://bugs.webkit.org/show_bug.cgi?id=180637 |
| |
| Reviewed by Michael Catanzaro. |
| |
| We need to make sure the implementation of the inline functions is |
| compiled when we compile the code using the function, now that the |
| compilation is divided, or we could end up with undefined symbols |
| when the declaration is not inlined, at least with some compilers |
| and optimizations enabled -O2. |
| |
| * b3/B3SwitchValue.cpp: replace the include. |
| |
| 2018-01-20 Filip Pizlo <fpizlo@apple.com> |
| |
| JSC GC should support TLCs (thread local caches) |
| https://bugs.webkit.org/show_bug.cgi?id=181559 |
| |
| Reviewed by Mark Lam and Saam Barati. |
| |
| This is a big step towards object distancing by site origin. This patch implements TLCs, or |
| thread-local caches, which allow each thread to allocate from its own free lists. It also |
| means that any given thread can context-switch TLCs. This will allow us to do separate |
| allocation for separate site origins. Eventually, once we reshape how MarkedBlock looks, this |
| will allow us to have a hard distancing constraint between objects from different origins. |
| |
| In this new design, every "size class" is represented as a BlockDirectory (formerly known as |
| MarkedAllocator, prior to r226822). This contains a bag of blocks allocated using some |
| aligned memory allocator (which roughly represents which cage you came out of), and anyone |
| using the same allocator can share those blocks - but so long as they are in that |
| BlockDirectory, they will have the size and type of that directory. Previously, each |
| BlockDirectory had exactly one FreeList. Now, each BlockDirectory has a double-linked-list of |
| LocalAllocators, each of which has a FreeList. |
| |
| To decide which LocalAllocator to allocate out of, we need a ThreadLocalCache and a |
| BlockDirectory. The directory gives us an offset-within-the-ThreadLocalCache, which we simply |
| call the Allocator (which is just a POD type that contains a 32-bit offset). Each allocation |
| starts by figuring out what Allocator it wants (often we have this information at JIT time). |
| Then the allocation loads its ThreadLocalCache::Data from a fast TLS slot. Then we add the |
| Allocator offset to the ThreadLocalCache::Data to get the LocalAllocator. Note that we use |
| offsets as opposed to indices to make it easy to do the math on each allocation (if |
| LocalAllocator had a weird size then every allocation would have to do an imul). |
| |
| This is a definite slow-down on GC-heavy benchmarks, but by a small margin, and only on |
| unusually heavy tests. For example, boyer and splay are both 3% regressed, but the Octane |
| geomean is just fine. The JetStream score regressed by 0.5% with p = 0.08 (so maybe there is |
| something there, but it's not significant according to our threshold). |
| |
| * JavaScriptCore.xcodeproj/project.pbxproj: |
| * Sources.txt: |
| * b3/B3LowerToAir.cpp: |
| * b3/B3PatchpointSpecial.cpp: |
| (JSC::B3::PatchpointSpecial::admitsStack): |
| * b3/B3StackmapSpecial.cpp: |
| (JSC::B3::StackmapSpecial::forEachArgImpl): |
| (JSC::B3::StackmapSpecial::isArgValidForRep): |
| * b3/B3StackmapValue.cpp: |
| (JSC::B3::StackmapValue::appendSomeRegisterWithClobber): |
| * b3/B3StackmapValue.h: |
| * b3/B3Validate.cpp: |
| * b3/B3ValueRep.cpp: |
| (JSC::B3::ValueRep::addUsedRegistersTo const): |
| (JSC::B3::ValueRep::dump const): |
| (WTF::printInternal): |
| * b3/B3ValueRep.h: |
| (JSC::B3::ValueRep::ValueRep): |
| * bytecode/AccessCase.cpp: |
| (JSC::AccessCase::generateImpl): |
| * bytecode/ObjectAllocationProfile.h: |
| (JSC::ObjectAllocationProfile::ObjectAllocationProfile): |
| (JSC::ObjectAllocationProfile::clear): |
| * bytecode/ObjectAllocationProfileInlines.h: |
| (JSC::ObjectAllocationProfile::initializeProfile): |
| * dfg/DFGSpeculativeJIT.cpp: |
| (JSC::DFG::SpeculativeJIT::emitAllocateRawObject): |
| (JSC::DFG::SpeculativeJIT::compileMakeRope): |
| (JSC::DFG::SpeculativeJIT::compileAllocatePropertyStorage): |
| (JSC::DFG::SpeculativeJIT::compileReallocatePropertyStorage): |
| (JSC::DFG::SpeculativeJIT::compileCreateThis): |
| (JSC::DFG::SpeculativeJIT::compileNewObject): |
| * dfg/DFGSpeculativeJIT.h: |
| (JSC::DFG::SpeculativeJIT::emitAllocateJSCell): |
| (JSC::DFG::SpeculativeJIT::emitAllocateJSObject): |
| * ftl/FTLAbstractHeapRepository.h: |
| * ftl/FTLLowerDFGToB3.cpp: |
| (JSC::FTL::DFG::LowerDFGToB3::compileMakeRope): |
| (JSC::FTL::DFG::LowerDFGToB3::compileMaterializeNewObject): |
| (JSC::FTL::DFG::LowerDFGToB3::allocatePropertyStorageWithSizeImpl): |
| (JSC::FTL::DFG::LowerDFGToB3::allocateHeapCell): |
| (JSC::FTL::DFG::LowerDFGToB3::allocateObject): |
| (JSC::FTL::DFG::LowerDFGToB3::allocatorForSize): |
| (JSC::FTL::DFG::LowerDFGToB3::allocateVariableSizedObject): |
| (JSC::FTL::DFG::LowerDFGToB3::allocateVariableSizedCell): |
| * heap/Allocator.cpp: Added. |
| (JSC::Allocator::cellSize const): |
| * heap/Allocator.h: Added. |
| (JSC::Allocator::Allocator): |
| (JSC::Allocator::offset const): |
| (JSC::Allocator::operator== const): |
| (JSC::Allocator::operator!= const): |
| (JSC::Allocator::operator bool const): |
| * heap/AllocatorInlines.h: Added. |
| (JSC::Allocator::allocate const): |
| (JSC::Allocator::tryAllocate const): |
| * heap/BlockDirectory.cpp: |
| (JSC::BlockDirectory::BlockDirectory): |
| (JSC::BlockDirectory::findBlockForAllocation): |
| (JSC::BlockDirectory::stopAllocating): |
| (JSC::BlockDirectory::prepareForAllocation): |
| (JSC::BlockDirectory::stopAllocatingForGood): |
| (JSC::BlockDirectory::resumeAllocating): |
| (JSC::BlockDirectory::endMarking): |
| (JSC::BlockDirectory::isFreeListedCell): |
| (JSC::BlockDirectory::didConsumeFreeList): Deleted. |
| (JSC::BlockDirectory::tryAllocateWithoutCollecting): Deleted. |
| (JSC::BlockDirectory::allocateIn): Deleted. |
| (JSC::BlockDirectory::tryAllocateIn): Deleted. |
| (JSC::BlockDirectory::doTestCollectionsIfNeeded): Deleted. |
| (JSC::BlockDirectory::allocateSlowCase): Deleted. |
| * heap/BlockDirectory.h: |
| (JSC::BlockDirectory::cellKind const): |
| (JSC::BlockDirectory::allocator const): |
| (JSC::BlockDirectory::freeList const): Deleted. |
| (JSC::BlockDirectory::offsetOfFreeList): Deleted. |
| (JSC::BlockDirectory::offsetOfCellSize): Deleted. |
| * heap/BlockDirectoryInlines.h: |
| (JSC::BlockDirectory::isFreeListedCell const): Deleted. |
| (JSC::BlockDirectory::allocate): Deleted. |
| * heap/CompleteSubspace.cpp: |
| (JSC::CompleteSubspace::CompleteSubspace): |
| (JSC::CompleteSubspace::allocatorFor): |
| (JSC::CompleteSubspace::allocate): |
| (JSC::CompleteSubspace::allocateNonVirtual): |
| (JSC::CompleteSubspace::allocatorForSlow): |
| (JSC::CompleteSubspace::allocateSlow): |
| (JSC::CompleteSubspace::tryAllocateSlow): |
| * heap/CompleteSubspace.h: |
| (JSC::CompleteSubspace::allocatorForSizeStep): |
| (JSC::CompleteSubspace::allocatorForNonVirtual): |
| * heap/FreeList.h: |
| * heap/GCDeferralContext.h: |
| * heap/Heap.cpp: |
| (JSC::Heap::Heap): |
| (JSC::Heap::lastChanceToFinalize): |
| * heap/Heap.h: |
| (JSC::Heap::threadLocalCacheLayout): |
| * heap/IsoCellSet.h: |
| * heap/IsoSubspace.cpp: |
| (JSC::IsoSubspace::IsoSubspace): |
| (JSC::IsoSubspace::allocatorFor): |
| (JSC::IsoSubspace::allocate): |
| (JSC::IsoSubspace::allocateNonVirtual): |
| * heap/IsoSubspace.h: |
| (JSC::IsoSubspace::allocatorForNonVirtual): |
| * heap/LocalAllocator.cpp: Added. |
| (JSC::LocalAllocator::LocalAllocator): |
| (JSC::LocalAllocator::reset): |
| (JSC::LocalAllocator::~LocalAllocator): |
| (JSC::LocalAllocator::stopAllocating): |
| (JSC::LocalAllocator::resumeAllocating): |
| (JSC::LocalAllocator::prepareForAllocation): |
| (JSC::LocalAllocator::stopAllocatingForGood): |
| (JSC::LocalAllocator::allocateSlowCase): |
| (JSC::LocalAllocator::didConsumeFreeList): |
| (JSC::LocalAllocator::tryAllocateWithoutCollecting): |
| (JSC::LocalAllocator::allocateIn): |
| (JSC::LocalAllocator::tryAllocateIn): |
| (JSC::LocalAllocator::doTestCollectionsIfNeeded): |
| (JSC::LocalAllocator::isFreeListedCell const): |
| * heap/LocalAllocator.h: Added. |
| (JSC::LocalAllocator::offsetOfFreeList): |
| (JSC::LocalAllocator::offsetOfCellSize): |
| * heap/LocalAllocatorInlines.h: Added. |
| (JSC::LocalAllocator::allocate): |
| * heap/MarkedSpace.cpp: |
| (JSC::MarkedSpace::stopAllocatingForGood): |
| * heap/MarkedSpace.h: |
| * heap/SlotVisitor.cpp: |
| * heap/SlotVisitor.h: |
| * heap/Subspace.h: |
| * heap/ThreadLocalCache.cpp: Added. |
| (JSC::ThreadLocalCache::create): |
| (JSC::ThreadLocalCache::ThreadLocalCache): |
| (JSC::ThreadLocalCache::~ThreadLocalCache): |
| (JSC::ThreadLocalCache::allocateData): |
| (JSC::ThreadLocalCache::destroyData): |
| (JSC::ThreadLocalCache::installSlow): |
| (JSC::ThreadLocalCache::installData): |
| (JSC::ThreadLocalCache::allocatorSlow): |
| (JSC::ThreadLocalCache::destructor): |
| * heap/ThreadLocalCache.h: Added. |
| (JSC::ThreadLocalCache::offsetOfSize): |
| (JSC::ThreadLocalCache::offsetOfFirstAllocator): |
| * heap/ThreadLocalCacheInlines.h: Added. |
| (JSC::ThreadLocalCache::getImpl): |
| (JSC::ThreadLocalCache::get): |
| (JSC::ThreadLocalCache::install): |
| (JSC::ThreadLocalCache::allocator): |
| (JSC::ThreadLocalCache::tryGetAllocator): |
| * heap/ThreadLocalCacheLayout.cpp: Added. |
| (JSC::ThreadLocalCacheLayout::ThreadLocalCacheLayout): |
| (JSC::ThreadLocalCacheLayout::~ThreadLocalCacheLayout): |
| (JSC::ThreadLocalCacheLayout::allocateOffset): |
| (JSC::ThreadLocalCacheLayout::snapshot): |
| (JSC::ThreadLocalCacheLayout::directory): |
| * heap/ThreadLocalCacheLayout.h: Added. |
| * jit/AssemblyHelpers.cpp: |
| (JSC::AssemblyHelpers::emitAllocateWithNonNullAllocator): |
| (JSC::AssemblyHelpers::emitAllocate): |
| (JSC::AssemblyHelpers::emitAllocateVariableSized): |
| * jit/AssemblyHelpers.h: |
| (JSC::AssemblyHelpers::vm): |
| (JSC::AssemblyHelpers::emitAllocateJSCell): |
| (JSC::AssemblyHelpers::emitAllocateJSObject): |
| (JSC::AssemblyHelpers::emitAllocateJSObjectWithKnownSize): |
| (JSC::AssemblyHelpers::emitAllocateWithNonNullAllocator): Deleted. |
| (JSC::AssemblyHelpers::emitAllocate): Deleted. |
| (JSC::AssemblyHelpers::emitAllocateVariableSized): Deleted. |
| * jit/JITOpcodes.cpp: |
| (JSC::JIT::emit_op_new_object): |
| (JSC::JIT::emit_op_create_this): |
| * jit/JITOpcodes32_64.cpp: |
| (JSC::JIT::emit_op_new_object): |
| (JSC::JIT::emit_op_create_this): |
| * runtime/ButterflyInlines.h: |
| (JSC::Butterfly::createUninitialized): |
| (JSC::Butterfly::tryCreate): |
| (JSC::Butterfly::growArrayRight): |
| * runtime/DirectArguments.cpp: |
| (JSC::DirectArguments::overrideThings): |
| * runtime/GenericArgumentsInlines.h: |
| (JSC::GenericArguments<Type>::initModifiedArgumentsDescriptor): |
| * runtime/HashMapImpl.h: |
| (JSC::HashMapBuffer::create): |
| * runtime/JSArray.cpp: |
| (JSC::JSArray::tryCreateUninitializedRestricted): |
| (JSC::JSArray::unshiftCountSlowCase): |
| * runtime/JSArray.h: |
| (JSC::JSArray::tryCreate): |
| * runtime/JSArrayBufferView.cpp: |
| (JSC::JSArrayBufferView::ConstructionContext::ConstructionContext): |
| * runtime/JSCellInlines.h: |
| (JSC::tryAllocateCellHelper): |
| * runtime/JSGlobalObject.cpp: |
| (JSC::JSGlobalObject::JSGlobalObject): |
| * runtime/JSGlobalObject.h: |
| (JSC::JSGlobalObject::threadLocalCache const): |
| * runtime/JSLock.cpp: |
| (JSC::JSLock::didAcquireLock): |
| * runtime/Options.h: |
| * runtime/RegExpMatchesArray.h: |
| (JSC::tryCreateUninitializedRegExpMatchesArray): |
| * runtime/VM.cpp: |
| (JSC::VM::VM): |
| * runtime/VM.h: |
| * runtime/VMEntryScope.cpp: |
| (JSC::VMEntryScope::VMEntryScope): |
| |
| 2018-01-24 Joseph Pecoraro <pecoraro@apple.com> |
| |
| Web Inspector: Simplify update-LegacyInspectorBackendCommands.rb |
| https://bugs.webkit.org/show_bug.cgi?id=182067 |
| |
| Reviewed by Brian Burg. |
| |
| * inspector/scripts/codegen/models.py: |
| (Framework.fromString): |
| (Frameworks): |
| * inspector/scripts/generate-inspector-protocol-bindings.py: |
| (generate_from_specification): |
| Allow framework WebInspectorUI to generate just the backend commands files. |
| |
| 2018-01-23 Mark Lam <mark.lam@apple.com> |
| |
| Update Poisoned pointers to take a Poison class instead of a uintptr_t&. |
| https://bugs.webkit.org/show_bug.cgi?id=182017 |
| <rdar://problem/36795513> |
| |
| Reviewed by Filip Pizlo and JF Bastien. |
| |
| Removed the POISON() macro. Now that we have Poison types, we can just use the |
| the Poison type instead and make the code a bit nicer to read. |
| |
| * API/JSAPIWrapperObject.h: |
| * API/JSCallbackFunction.h: |
| * API/JSCallbackObject.h: |
| * b3/B3LowerMacros.cpp: |
| * b3/testb3.cpp: |
| (JSC::B3::testInterpreter): |
| * bytecode/CodeBlock.h: |
| (JSC::CodeBlock::instructions): |
| (JSC::CodeBlock::instructions const): |
| * dfg/DFGOSRExitCompilerCommon.h: |
| (JSC::DFG::adjustFrameAndStackInOSRExitCompilerThunk): |
| * dfg/DFGSpeculativeJIT.cpp: |
| (JSC::DFG::SpeculativeJIT::compileCheckSubClass): |
| (JSC::DFG::SpeculativeJIT::emitSwitchIntJump): |
| * ftl/FTLLowerDFGToB3.cpp: |
| (JSC::FTL::DFG::LowerDFGToB3::compileCheckSubClass): |
| * jit/JIT.h: |
| * jit/ThunkGenerators.cpp: |
| (JSC::virtualThunkFor): |
| (JSC::nativeForGenerator): |
| (JSC::boundThisNoArgsFunctionCallGenerator): |
| * parser/UnlinkedSourceCode.h: |
| * runtime/ArrayPrototype.h: |
| * runtime/CustomGetterSetter.h: |
| * runtime/DateInstance.h: |
| * runtime/InternalFunction.h: |
| * runtime/JSArrayBuffer.h: |
| * runtime/JSCPoison.cpp: |
| (JSC::initializePoison): |
| * runtime/JSCPoison.h: |
| * runtime/JSGlobalObject.h: |
| * runtime/JSScriptFetchParameters.h: |
| * runtime/JSScriptFetcher.h: |
| * runtime/NativeExecutable.h: |
| * runtime/StructureTransitionTable.h: |
| * runtime/WriteBarrier.h: |
| (JSC::WriteBarrier::poison): Deleted. |
| * wasm/js/JSToWasm.cpp: |
| (JSC::Wasm::createJSToWasmWrapper): |
| * wasm/js/JSWebAssemblyCodeBlock.cpp: |
| (JSC::JSWebAssemblyCodeBlock::JSWebAssemblyCodeBlock): |
| * wasm/js/JSWebAssemblyCodeBlock.h: |
| * wasm/js/JSWebAssemblyInstance.h: |
| (JSC::JSWebAssemblyInstance::poison): |
| * wasm/js/JSWebAssemblyMemory.h: |
| * wasm/js/JSWebAssemblyModule.h: |
| * wasm/js/JSWebAssemblyTable.h: |
| * wasm/js/WasmToJS.cpp: |
| (JSC::Wasm::handleBadI64Use): |
| (JSC::Wasm::wasmToJS): |
| * wasm/js/WebAssemblyFunctionBase.h: |
| * wasm/js/WebAssemblyModuleRecord.h: |
| * wasm/js/WebAssemblyToJSCallee.h: |
| * wasm/js/WebAssemblyWrapperFunction.h: |
| |
| 2018-01-23 Yusuke Suzuki <utatane.tea@gmail.com> |
| |
| Unreviewed, suppress GCC warnings |
| https://bugs.webkit.org/show_bug.cgi?id=181976 |
| |
| * runtime/TypedArrayType.h: |
| |
| 2018-01-23 Yusuke Suzuki <utatane.tea@gmail.com> |
| |
| [YARR] Add diagnosis for YarrJIT failures |
| https://bugs.webkit.org/show_bug.cgi?id=181927 |
| |
| Reviewed by Sam Weinig. |
| |
| It is nice if we can see the reason why YarrJIT fails to compile a given pattern. |
| This patch introduces Yarr::JITFailureReason and dumps messages if Options::dumpCompiledRegExpPatterns is specified. |
| |
| * runtime/RegExp.cpp: |
| (JSC::RegExp::compile): |
| (JSC::RegExp::compileMatchOnly): |
| * yarr/YarrJIT.cpp: |
| (JSC::Yarr::YarrGenerator::generateTerm): |
| (JSC::Yarr::YarrGenerator::backtrackTerm): |
| (JSC::Yarr::YarrGenerator::opCompileParenthesesSubpattern): |
| (JSC::Yarr::YarrGenerator::YarrGenerator): |
| (JSC::Yarr::YarrGenerator::compile): |
| (JSC::Yarr::dumpCompileFailure): |
| (JSC::Yarr::jitCompile): |
| * yarr/YarrJIT.h: |
| (JSC::Yarr::YarrCodeBlock::setFallBack): |
| (JSC::Yarr::YarrCodeBlock::fallBack): |
| (JSC::Yarr::YarrCodeBlock::clear): |
| (JSC::Yarr::YarrCodeBlock::YarrCodeBlock): Deleted. |
| (JSC::Yarr::YarrCodeBlock::~YarrCodeBlock): Deleted. |
| (JSC::Yarr::YarrCodeBlock::isFallBack): Deleted. |
| |
| 2018-01-23 Alex Christensen <achristensen@webkit.org> |
| |
| Remove pre-Sierra-OS-specific code in WTF and JavaScriptCore |
| https://bugs.webkit.org/show_bug.cgi?id=182028 |
| |
| Reviewed by Keith Miller. |
| |
| * inspector/remote/cocoa/RemoteInspectorXPCConnection.h: |
| * inspector/remote/cocoa/RemoteInspectorXPCConnection.mm: |
| (Inspector::RemoteInspectorXPCConnection::handleEvent): |
| |
| 2018-01-23 Filip Pizlo <fpizlo@apple.com> |
| |
| Use precise index masking for FTL GetByArgumentByVal |
| https://bugs.webkit.org/show_bug.cgi?id=182006 |
| |
| Reviewed by Keith Miller. |
| |
| This protects speculative out-of-bounds on arguments[index]. |
| |
| Making this work right involved fixing a possible overflow situation with |
| numberOfArgumentsToSkip. |
| |
| * dfg/DFGByteCodeParser.cpp: |
| (JSC::DFG::ByteCodeParser::findArgumentPositionForLocal): |
| * dfg/DFGGraph.cpp: |
| (JSC::DFG::Graph::dump): |
| * dfg/DFGNode.h: |
| (JSC::DFG::Node::hasNumberOfArgumentsToSkip): |
| (JSC::DFG::Node::numberOfArgumentsToSkip): |
| * dfg/DFGStackLayoutPhase.cpp: |
| (JSC::DFG::StackLayoutPhase::run): |
| * ftl/FTLLowerDFGToB3.cpp: |
| (JSC::FTL::DFG::LowerDFGToB3::compileGetMyArgumentByVal): |
| |
| 2018-01-23 David Kilzer <ddkilzer@apple.com> |
| |
| Follow-up for: oss-fuzz jsc build is broken: StringImpl.h:27:10: fatal error: 'unicode/ustring.h' file not found |
| <https://webkit.org/b/181871> |
| <rdar://problem/36669691> |
| |
| Address feedback for this change. |
| |
| * CMakeLists.txt: Change "SYSTEM PUBLIC" to "SYSTEM PRIVATE" per |
| feedback from Konstantin Tokarev. |
| |
| 2018-01-23 Robin Morisset <rmorisset@apple.com> |
| |
| Rollout r219636 |
| https://bugs.webkit.org/show_bug.cgi?id=181997 |
| <rdar://problem/35883022> |
| |
| Unreviewed, as it is a rollout. |
| |
| * dfg/DFGSpeculativeJIT.cpp: |
| (JSC::DFG::SpeculativeJIT::emitAllocateRawObject): |
| * runtime/JSArray.cpp: |
| (JSC::JSArray::tryCreateUninitializedRestricted): |
| * runtime/JSArray.h: |
| (JSC::JSArray::tryCreate): |
| * runtime/JSObject.cpp: |
| (JSC::JSObject::ensureLengthSlow): |
| |
| 2018-01-23 Mark Lam <mark.lam@apple.com> |
| |
| Re-arrange TypedArray JSTypes to match the order of the TypedArrayType enum list. |
| https://bugs.webkit.org/show_bug.cgi?id=181976 |
| <rdar://problem/36766936> |
| |
| Reviewed by Filip Pizlo. |
| |
| 1. The order of TypedArray JSTypes now matches the order the TypedArrayType enum |
| list. I also added static asserts in TypedArrayType.h to enforce this. |
| |
| Also redefined FOR_EACH_TYPED_ARRAY_TYPE() in terms of |
| |
| 2. Define 4 new values: |
| a. FirstTypedArrayType |
| b. LastTypedArrayType |
| c. NumberOfTypedArrayTypesExcludingDataView |
| d. NumberOfTypedArrayTypes |
| |
| Use these everywhere where we iterate or bisect the TypedArray JSTypes. |
| |
| 3. Removed NUMBER_OF_TYPED_ARRAY_TYPES, and use NumberOfTypedArrayTypes instead. |
| |
| 4. Simplify the code that converts between TypedArrayType and JSType. |
| |
| Changed typedArrayTypeForType() to be the mirror image of typeForTypedArrayType(). |
| Previously, typedArrayTypeForType() converts DataViewType to NotTypedArray |
| instead of TypeDataView. Now, it converts to TypeDataView. |
| |
| This does not result in any change of behavior because typedArrayTypeForType() |
| is only called in Structure::hasIndexingHeader(), and its result is passed to |
| isTypedView(), which handles TypeDataView correctly. |
| |
| 5. Also fixed a bug in SpeculativeJIT::compileGetTypedArrayByteOffset(). |
| If the vector is null, we can skip the rest of the checks. While the current |
| code does not result in incorrect behavior, it is inefficient, and communicates |
| wrong information to the reader i.e. implying that there's something in the |
| dataGPR when there's not. The dataGPR should also be null in this case. |
| |
| * dfg/DFGByteCodeParser.cpp: |
| (JSC::DFG::ByteCodeParser::handleConstantInternalFunction): |
| * dfg/DFGSpeculativeJIT.cpp: |
| (JSC::DFG::SpeculativeJIT::compileIsTypedArrayView): |
| (JSC::DFG::SpeculativeJIT::compileGetTypedArrayByteOffset): |
| * ftl/FTLLowerDFGToB3.cpp: |
| (JSC::FTL::DFG::LowerDFGToB3::isTypedArrayView): |
| * ftl/FTLOSRExit.cpp: |
| * llint/LowLevelInterpreter.asm: |
| * llint/LowLevelInterpreter64.asm: |
| * runtime/JSGlobalObject.cpp: |
| (JSC::JSGlobalObject::visitChildren): |
| * runtime/JSType.h: |
| * runtime/TypedArrayType.cpp: |
| (JSC::typeForTypedArrayType): Deleted. |
| * runtime/TypedArrayType.h: |
| (JSC::typedArrayTypeForType): |
| (JSC::typeForTypedArrayType): |
| |
| 2018-01-23 Filip Pizlo <fpizlo@apple.com> |
| |
| DFG should always flush `this` |
| https://bugs.webkit.org/show_bug.cgi?id=181999 |
| |
| Reviewed by Saam Barati and Mark Lam. |
| |
| This is going to make it possible to use precise index masking for arguments-on-the-stack |
| accesses with an index adjusted so that 0 is this. Without this change, we would have no way |
| of masking when the argument count is 0, unless we padded the argument area so that there was |
| always an argument slot after `this` and it was always initialized. |
| |
| This is neutral on all benchmarks. |
| |
| * dfg/DFGByteCodeParser.cpp: |
| (JSC::DFG::ByteCodeParser::flushImpl): |
| (JSC::DFG::ByteCodeParser::flushForTerminalImpl): |
| (JSC::DFG::ByteCodeParser::flush): |
| (JSC::DFG::ByteCodeParser::flushForTerminal): |
| (JSC::DFG::ByteCodeParser::parse): |
| (JSC::DFG::flushImpl): Deleted. |
| (JSC::DFG::flushForTerminalImpl): Deleted. |
| * dfg/DFGPreciseLocalClobberize.h: |
| (JSC::DFG::PreciseLocalClobberizeAdaptor::readTop): |
| |
| 2018-01-23 Filip Pizlo <fpizlo@apple.com> |
| |
| JSC should use a speculation fence on VM entry/exit |
| https://bugs.webkit.org/show_bug.cgi?id=181991 |
| |
| Reviewed by JF Bastien and Mark Lam. |
| |
| This adds a WTF::speculationFence on VM entry and exit. |
| |
| For a microbenchmark that just calls a native function (supplied via an Objective-C block) in a |
| tight loop from JS is a 0% regression on x86 and a 11% regression on ARM64. |
| |
| * runtime/JSLock.cpp: |
| (JSC::JSLock::didAcquireLock): |
| (JSC::JSLock::willReleaseLock): |
| |
| 2018-01-23 Yusuke Suzuki <utatane.tea@gmail.com> |
| |
| [JSC] JIT requires sizeof(bool) == 1 |
| https://bugs.webkit.org/show_bug.cgi?id=181150 |
| |
| Reviewed by Saam Barati. |
| |
| LLInt and JIT assumes that sizeof(bool) == 1. But it is implementation-dependent in C++ spec. |
| Since this is a mandatory requirement in JSC, we add a static_assert to ensure this. |
| |
| * runtime/InitializeThreading.cpp: |
| |
| 2018-01-23 Robin Morisset <rmorisset@apple.com> |
| |
| Update the argument count in DFGByteCodeParser::handleRecursiveCall |
| https://bugs.webkit.org/show_bug.cgi?id=181739 |
| <rdar://problem/36627662> |
| |
| Reviewed by Saam Barati. |
| |
| When calling a function, its number of arguments is set on the stack. When we turn a recursive tail call |
| into a jump, we should update that stack slot as there is no guarantee that the function was originally |
| called with the same number of arguments. Forgetting to do this is observable through 'arguments.length'. |
| |
| It required adding a new DFG node: 'SetArgumentCountIncludingThis', that takes an unsigned int |
| as its first OpInfo field, and stores it to the stack at the right place. |
| |
| We must be a bit careful in where we put this new node, as it ClobbersExit. |
| We must also fix DFGArgumentsEliminationPhase and DFGPutStackSinkingPhase as they assumed that any node that writes to the stack must write to either an argument or a local. |
| |
| * dfg/DFGAbstractInterpreterInlines.h: |
| (JSC::DFG::AbstractInterpreter<AbstractStateType>::executeEffects): |
| * dfg/DFGArgumentsEliminationPhase.cpp: |
| * dfg/DFGByteCodeParser.cpp: |
| (JSC::DFG::ByteCodeParser::handleRecursiveTailCall): |
| * dfg/DFGClobberize.h: |
| (JSC::DFG::clobberize): |
| * dfg/DFGDoesGC.cpp: |
| (JSC::DFG::doesGC): |
| * dfg/DFGFixupPhase.cpp: |
| (JSC::DFG::FixupPhase::fixupNode): |
| * dfg/DFGMayExit.cpp: |
| * dfg/DFGNode.h: |
| (JSC::DFG::Node::argumentCountIncludingThis): |
| * dfg/DFGNodeType.h: |
| * dfg/DFGPredictionPropagationPhase.cpp: |
| * dfg/DFGPutStackSinkingPhase.cpp: |
| * dfg/DFGSafeToExecute.h: |
| (JSC::DFG::safeToExecute): |
| * dfg/DFGSpeculativeJIT.cpp: |
| (JSC::DFG::SpeculativeJIT::compileSetArgumentCountIncludingThis): |
| * dfg/DFGSpeculativeJIT.h: |
| * dfg/DFGSpeculativeJIT32_64.cpp: |
| (JSC::DFG::SpeculativeJIT::compile): |
| * dfg/DFGSpeculativeJIT64.cpp: |
| (JSC::DFG::SpeculativeJIT::compile): |
| * ftl/FTLCapabilities.cpp: |
| (JSC::FTL::canCompile): |
| * ftl/FTLLowerDFGToB3.cpp: |
| (JSC::FTL::DFG::LowerDFGToB3::compileNode): |
| (JSC::FTL::DFG::LowerDFGToB3::compileSetArgumentCountIncludingThis): |
| |
| 2018-01-22 Michael Saboff <msaboff@apple.com> |
| |
| DFG abstract interpreter needs to properly model effects of some Math ops |
| https://bugs.webkit.org/show_bug.cgi?id=181886 |
| |
| Reviewed by Saam Barati. |
| |
| Reviewed the processing of the various ArithXXX and CompareXXX and found that |
| several nodes don't handle UntypedUse. Added clobberWorld() for those cases. |
| |
| * dfg/DFGAbstractInterpreter.h: |
| * dfg/DFGAbstractInterpreterInlines.h: |
| (JSC::DFG::AbstractInterpreter<AbstractStateType>::executeEffects): |
| (JSC::DFG::AbstractInterpreter<AbstractStateType>::executeDoubleUnaryOpEffects): |
| |
| 2018-01-21 Wenson Hsieh <wenson_hsieh@apple.com> |
| |
| Add a new feature flag for EXTRA_ZOOM_MODE and reintroduce AdditionalFeatureDefines.h |
| https://bugs.webkit.org/show_bug.cgi?id=181918 |
| |
| Reviewed by Tim Horton. |
| |
| Add EXTRA_ZOOM_MODE to FeatureDefines.xconfig (off by default). |
| |
| * Configurations/FeatureDefines.xcconfig: |
| |
| 2018-01-20 Caio Lima <ticaiolima@gmail.com> |
| |
| [JSC] NumberPrototype::extractRadixFromArgs incorrectly cast double to int32_t |
| https://bugs.webkit.org/show_bug.cgi?id=181182 |
| |
| Reviewed by Darin Adler. |
| |
| Casting double to integer is undefined behavior when the truncation |
| results into a value that doesn't fit into integer size, |
| according C++ spec[1]. Thus, we are changing bigIntProtoFuncToString and |
| numberProtoFuncToString to remove these source of undefined |
| behavior. |
| |
| [1] - http://en.cppreference.com/w/cpp/language/implicit_conversion |
| |
| * runtime/BigIntPrototype.cpp: |
| (JSC::bigIntProtoFuncToString): |
| * runtime/NumberPrototype.cpp: |
| (JSC::numberProtoFuncToString): |
| (JSC::extractToStringRadixArgument): |
| (JSC::extractRadixFromArgs): Deleted. |
| * runtime/NumberPrototype.h: |
| |
| 2018-01-19 Saam Barati <sbarati@apple.com> |
| |
| Kill ArithNegate's ArithProfile assert inside BytecodeParser |
| https://bugs.webkit.org/show_bug.cgi?id=181877 |
| <rdar://problem/36630552> |
| |
| Reviewed by Mark Lam. |
| |
| Before this patch, we used to assert that op_negate's result ArithProfile |
| only produces number. It's logically true that negate only produces a number. |
| However, the DFG may incorrectly pick this ArithProfile when doing OSR exit |
| profiling. So we'll end up profiling something that's likely the input to |
| negate. This patch removes the assert. We cede to the fact that Graph::methodOfGettingAValueProfileFor |
| is entirely heuristic based, potentially leading to profiling results being imprecise. |
| |
| * dfg/DFGByteCodeParser.cpp: |
| (JSC::DFG::ByteCodeParser::makeSafe): |
| |
| 2018-01-19 David Kilzer <ddkilzer@apple.com> |
| |
| oss-fuzz jsc build is broken: StringImpl.h:27:10: fatal error: 'unicode/ustring.h' file not found |
| <https://webkit.org/b/181871> |
| |
| Rubber-stamped by JF Bastien. |
| |
| * CMakeLists.txt: Add ICU header search path to |
| LLIntOffsetsExtractor target by reusing |
| JavaScriptCore_SYSTEM_INCLUDE_DIRECTORIES. |
| |
| 2018-01-19 Saam Barati <sbarati@apple.com> |
| |
| Spread's effects are modeled incorrectly both in AI and in Clobberize |
| https://bugs.webkit.org/show_bug.cgi?id=181867 |
| <rdar://problem/36290415> |
| |
| Reviewed by Michael Saboff. |
| |
| * dfg/DFGAbstractInterpreterInlines.h: |
| (JSC::DFG::AbstractInterpreter<AbstractStateType>::executeEffects): |
| * dfg/DFGClobberize.h: |
| (JSC::DFG::clobberize): |
| |
| 2018-01-19 Keith Miller <keith_miller@apple.com> |
| |
| HaveInternalSDK includes should be "#include?" |
| https://bugs.webkit.org/show_bug.cgi?id=179670 |
| |
| Reviewed by Dan Bernstein. |
| |
| * Configurations/Base.xcconfig: |
| |
| 2018-01-18 JF Bastien <jfbastien@apple.com> |
| |
| Set the minimum executable allocator size properly |
| https://bugs.webkit.org/show_bug.cgi?id=181816 |
| <rdar://problem/36635533> |
| |
| Reviewed by Saam Barati. |
| |
| Executable allocator expects at least two page size's worth of |
| allocation in certain conditions, and that causes some tests to |
| now fail because they ask for less. Set that minimum correctly. We |
| were already rounding up to a page size, so having a minimum of 2 |
| page sizes is fine. |
| |
| * jit/ExecutableAllocator.cpp: |
| (JSC::FixedVMPoolExecutableAllocator::FixedVMPoolExecutableAllocator): |
| |
| 2018-01-18 Michael Saboff <msaboff@apple.com> |
| |
| Unreviewed build fix for Windows |
| |
| * interpreter/FrameTracers.h: |
| (JSC::assertStackPointerIsAligned): Can't use gcc style inlined assembly |
| on Windows. |
| |
| 2018-01-18 Mark Lam <mark.lam@apple.com> |
| |
| Poisons should be initialized after Options are initialized. |
| https://bugs.webkit.org/show_bug.cgi?id=181807 |
| <rdar://problem/36629138> |
| |
| Reviewed by Keith Miller. |
| |
| This is because poison initialization may depend on options. |
| |
| * runtime/InitializeThreading.cpp: |
| (JSC::initializeThreading): |
| |
| 2018-01-18 Dan Bernstein <mitz@apple.com> |
| |
| [Xcode] Streamline and future-proof target-macOS-version-dependent build setting definitions |
| https://bugs.webkit.org/show_bug.cgi?id=181803 |
| |
| Reviewed by Tim Horton. |
| |
| * Configurations/Base.xcconfig: Updated. |
| * Configurations/DebugRelease.xcconfig: Ditto. |
| * Configurations/FeatureDefines.xcconfig: Adopted macOSTargetConditionals helpers. |
| * Configurations/Version.xcconfig: Updated. |
| * Configurations/macOSTargetConditionals.xcconfig: Added. Defines helper build settings |
| useful for defining settings that depend on the target macOS version. |
| |
| 2018-01-18 Michael Saboff <msaboff@apple.com> |
| |
| REGRESSION (r226068): [X86] Crash in JavaScriptCore ShadowChicken when handling exceptions |
| https://bugs.webkit.org/show_bug.cgi?id=181802 |
| |
| Reviewed by Filip Pizlo. |
| |
| There where a few places where the stack isn't properly aligned for X86 when we call into C++ code. |
| Two places are where we call into exception handling code, the LLInt and from nativeForGenerator. |
| The other place was when we call into the operationOSRWriteBarrier(). |
| |
| Added an assert check that the stack is aligned on X86 platforms in the native call tracing code. |
| This helped find the other cases beyond the original problem. |
| |
| * dfg/DFGOSRExitCompilerCommon.cpp: |
| (JSC::DFG::osrWriteBarrier): |
| * interpreter/FrameTracers.h: |
| (JSC::assertStackPointerIsAligned): |
| (JSC::NativeCallFrameTracer::NativeCallFrameTracer): |
| (JSC::NativeCallFrameTracerWithRestore::NativeCallFrameTracerWithRestore): |
| * jit/ThunkGenerators.cpp: |
| (JSC::nativeForGenerator): |
| * llint/LowLevelInterpreter32_64.asm: |
| |
| 2018-01-18 Commit Queue <commit-queue@webkit.org> |
| |
| Unreviewed, rolling out r227096. |
| https://bugs.webkit.org/show_bug.cgi?id=181788 |
| |
| "it caused a 15% octane regression" (Requested by saamyjoon on |
| #webkit). |
| |
| Reverted changeset: |
| |
| "Support MultiGetByOffset in the DFG" |
| https://bugs.webkit.org/show_bug.cgi?id=181466 |
| https://trac.webkit.org/changeset/227096 |
| |
| 2018-01-17 Yusuke Suzuki <utatane.tea@gmail.com> |
| |
| [DFG][FTL] Introduce PhantomNewRegexp and RegExpExecNonGlobalOrSticky |
| https://bugs.webkit.org/show_bug.cgi?id=181535 |
| |
| Reviewed by Saam Barati. |
| |
| When executing the code like `string.match(/regexp/)`, `/regexp/` object is created every time we execute this code. |
| However, user rarely cares about this `/regexp/` object. Typically, it is soon discarded even if it has `lastIndex` |
| information. So we should not create RegExpObject for this typical case. |
| |
| This patch introduces PhantomNewRegexp. We convert NewRegexp node to PhantomNewRegexp in Object Allocation Sinking (OAS) |
| phase. We should do this analysis in OAS phase since we track modifications to `lastIndex` in the OAS phase. Even if |
| `lastIndex` is modified, it may not be read by users. So we have a chance to drop this NewRegexp beacause we carefully model |
| SetRegExpObjectLastIndex and GetRegExpObjectLastIndex in OAS phase. |
| |
| This patch is a first attempt to drop NewRegexp. So we start optimizing it with the simple step: we first drop RegExp with |
| non-global and non-sticky one. We can later extend this optimization for RegExp with global flag. But this is not included |
| in this patch. |
| |
| We convert RegExpExec to RegExpExecNonGlobalOrSticky if we find that the given RegExpObject's RegExp is not global/sticky |
| flagged. Since we do not need to touch `lastIndex` property in this case, RegExpExecNonGlobalOrSticky just takes RegExp |
| instead of RegExpObject. This offers the chance to make NewRegExp unused. |
| |
| We also convert RegExpMatchFast to RegExpExecNonGlobalOrSticky if its RegExpObject's RegExp is non-global and non-sticky, |
| since they are the same behavior. |
| |
| The above optimization completely removes NewRegexp in SixSpeed's regexp-u.{es5,es6}. The resulted execution time is |
| somewhat pure execution time of our Yarr implementation. |
| |
| baseline patched |
| |
| regex-u.es5 34.8557+-0.5963 ^ 6.1507+-0.5526 ^ definitely 5.6670x faster |
| regex-u.es6 89.1919+-3.3851 ^ 32.0917+-0.4260 ^ definitely 2.7793x faster |
| |
| This patch does not change Octane/RegExp so much since it heavily uses String.prototype.replace, which is not handled in |
| this patch right now. We should support StringReplace node in subsequent patches. |
| |
| * dfg/DFGAbstractInterpreterInlines.h: |
| (JSC::DFG::AbstractInterpreter<AbstractStateType>::executeEffects): |
| * dfg/DFGByteCodeParser.cpp: |
| (JSC::DFG::ByteCodeParser::parseBlock): |
| * dfg/DFGClobberize.h: |
| (JSC::DFG::clobberize): |
| * dfg/DFGClobbersExitState.cpp: |
| (JSC::DFG::clobbersExitState): |
| * dfg/DFGDoesGC.cpp: |
| (JSC::DFG::doesGC): |
| * dfg/DFGFixupPhase.cpp: |
| (JSC::DFG::FixupPhase::fixupNode): |
| * dfg/DFGGraph.cpp: |
| (JSC::DFG::Graph::dump): |
| * dfg/DFGMayExit.cpp: |
| * dfg/DFGNode.cpp: |
| (JSC::DFG::Node::convertToRegExpExecNonGlobalOrSticky): |
| * dfg/DFGNode.h: |
| (JSC::DFG::Node::convertToPhantomNewRegexp): |
| (JSC::DFG::Node::convertToSetRegExpObjectLastIndex): |
| (JSC::DFG::Node::hasHeapPrediction): |
| (JSC::DFG::Node::hasCellOperand): |
| (JSC::DFG::Node::isPhantomAllocation): |
| (JSC::DFG::Node::hasIgnoreLastIndexIsWritable): |
| (JSC::DFG::Node::ignoreLastIndexIsWritable): |
| * dfg/DFGNodeType.h: |
| * dfg/DFGObjectAllocationSinkingPhase.cpp: |
| * dfg/DFGOperations.cpp: |
| * dfg/DFGOperations.h: |
| * dfg/DFGPredictionPropagationPhase.cpp: |
| * dfg/DFGPromotedHeapLocation.cpp: |
| (WTF::printInternal): |
| * dfg/DFGPromotedHeapLocation.h: |
| (JSC::DFG::PromotedLocationDescriptor::neededForMaterialization const): |
| * dfg/DFGSafeToExecute.h: |
| (JSC::DFG::safeToExecute): |
| * dfg/DFGSpeculativeJIT.cpp: |
| (JSC::DFG::SpeculativeJIT::compileNewRegexp): |
| (JSC::DFG::SpeculativeJIT::compileSetRegExpObjectLastIndex): |
| (JSC::DFG::SpeculativeJIT::compileRegExpExecNonGlobalOrSticky): |
| * dfg/DFGSpeculativeJIT.h: |
| (JSC::DFG::SpeculativeJIT::callOperation): |
| * dfg/DFGSpeculativeJIT32_64.cpp: |
| (JSC::DFG::SpeculativeJIT::compile): |
| * dfg/DFGSpeculativeJIT64.cpp: |
| (JSC::DFG::SpeculativeJIT::compile): |
| * dfg/DFGStrengthReductionPhase.cpp: |
| (JSC::DFG::StrengthReductionPhase::handleNode): |
| * dfg/DFGValidate.cpp: |
| * ftl/FTLCapabilities.cpp: |
| (JSC::FTL::canCompile): |
| * ftl/FTLLowerDFGToB3.cpp: |
| (JSC::FTL::DFG::LowerDFGToB3::compileNode): |
| (JSC::FTL::DFG::LowerDFGToB3::compileRegExpExecNonGlobalOrSticky): |
| (JSC::FTL::DFG::LowerDFGToB3::compileNewRegexp): |
| (JSC::FTL::DFG::LowerDFGToB3::compileSetRegExpObjectLastIndex): |
| * ftl/FTLOperations.cpp: |
| (JSC::FTL::operationPopulateObjectInOSR): |
| (JSC::FTL::operationMaterializeObjectInOSR): |
| * jit/JITOperations.h: |
| * runtime/RegExpObject.h: |
| (JSC::RegExpObject::create): |
| |
| 2018-01-17 Yusuke Suzuki <utatane.tea@gmail.com> |
| |
| [FTL] Remove unused helper functions to convert node to PutHint |
| https://bugs.webkit.org/show_bug.cgi?id=181775 |
| |
| Reviewed by Saam Barati. |
| |
| We are using PromotedHeapLocation::createHint. So they are not necessary. |
| |
| * dfg/DFGNode.cpp: |
| (JSC::DFG::Node::convertToPutHint): Deleted. |
| (JSC::DFG::Node::convertToPutStructureHint): Deleted. |
| (JSC::DFG::Node::convertToPutByOffsetHint): Deleted. |
| (JSC::DFG::Node::convertToPutClosureVarHint): Deleted. |
| * dfg/DFGNode.h: |
| |
| 2018-01-17 Yusuke Suzuki <utatane.tea@gmail.com> |
| |
| Unreviewed, suppress warnings on GCC |
| |
| Since `length` and `p` are always positive or zero, |
| static_cast<unsigned>() does what we want. |
| |
| * runtime/JSBigInt.cpp: |
| (JSC::JSBigInt::parseInt): |
| |
| 2018-01-17 Saam Barati <sbarati@apple.com> |
| |
| Disable Atomics when SharedArrayBuffer isn’t enabled |
| https://bugs.webkit.org/show_bug.cgi?id=181572 |
| <rdar://problem/36553206> |
| |
| Reviewed by Michael Saboff. |
| |
| * runtime/JSGlobalObject.cpp: |
| (JSC::JSGlobalObject::init): |
| (JSC::createAtomicsProperty): Deleted. |
| |
| 2018-01-17 Saam Barati <sbarati@apple.com> |
| |
| Support MultiGetByOffset in the DFG |
| https://bugs.webkit.org/show_bug.cgi?id=181466 |
| |
| Reviewed by Keith Miller. |
| |
| This seems to benefit Speedometer in my local testing. It seems like this |
| might be around a 0.5% improvement. |
| |
| * dfg/DFGAbstractInterpreterInlines.h: |
| (JSC::DFG::AbstractInterpreter<AbstractStateType>::executeEffects): |
| * dfg/DFGByteCodeParser.cpp: |
| (JSC::DFG::ByteCodeParser::handleGetById): |
| * dfg/DFGConstantFoldingPhase.cpp: |
| (JSC::DFG::ConstantFoldingPhase::foldConstants): |
| * dfg/DFGGraph.h: |
| (JSC::DFG::Graph::supportsMultiGetByOffset): |
| * dfg/DFGSpeculativeJIT64.cpp: |
| (JSC::DFG::SpeculativeJIT::compile): |
| |
| 2018-01-17 Saam Barati <sbarati@apple.com> |
| |
| DFG::Node::convertToConstant needs to clear the varargs flags |
| https://bugs.webkit.org/show_bug.cgi?id=181697 |
| <rdar://problem/36497332> |
| |
| Reviewed by Yusuke Suzuki. |
| |
| * dfg/DFGNode.h: |
| (JSC::DFG::Node::convertToConstant): |
| |
| 2018-01-16 JF Bastien <jfbastien@apple.com> |
| |
| Allow dangerous disabling of poison |
| https://bugs.webkit.org/show_bug.cgi?id=181685 |
| <rdar://problem/36546265> |
| |
| Reviewed by Keith Miller. |
| |
| Some tools such as leak detectors and such like to look at real |
| pointers, and poisoned ones confuse them. Add a JSC option to |
| disable poisoning, but log to the console when this is done. |
| |
| * runtime/JSCPoison.cpp: |
| (JSC::initializePoison): |
| * runtime/Options.h: |
| |
| 2018-01-16 Ryan Haddad <ryanhaddad@apple.com> |
| |
| Unreviewed, rolling out r226937. |
| |
| Tests added with this change are failing due to a missing |
| exception check. |
| |
| Reverted changeset: |
| |
| "[JSC] NumberPrototype::extractRadixFromArgs incorrectly cast |
| double to int32_t" |
| https://bugs.webkit.org/show_bug.cgi?id=181182 |
| https://trac.webkit.org/changeset/226937 |
| |
| 2018-01-16 Michael Catanzaro <mcatanzaro@igalia.com> |
| |
| Test programs should only be built in developer mode |
| https://bugs.webkit.org/show_bug.cgi?id=181653 |
| |
| Reviewed by Carlos Garcia Campos. |
| |
| Build test programs only in developer mode, and fix code style. |
| |
| * shell/CMakeLists.txt: |
| |
| 2018-01-15 Michael Catanzaro <mcatanzaro@igalia.com> |
| |
| Improve use of ExportMacros |
| https://bugs.webkit.org/show_bug.cgi?id=181652 |
| |
| Reviewed by Konstantin Tokarev. |
| |
| * API/JSBase.h: Update a comment. |
| * inspector/InspectorBackendDispatcher.h: Use a better, yet equivalent, WTF macro. |
| * runtime/JSExportMacros.h: Simplify the #defines in this file. |
| |
| 2018-01-15 JF Bastien <jfbastien@apple.com> |
| |
| Remove makePoisonedUnique |
| https://bugs.webkit.org/show_bug.cgi?id=181630 |
| <rdar://problem/36498623> |
| |
| Reviewed by Mark Lam. |
| |
| I added a conversion from std::unique_ptr, so we can just use |
| std::make_unique and it'll auto-poison when converted. |
| |
| * bytecode/CodeBlock.h: |
| (JSC::CodeBlock::makePoisonedUnique): Deleted. |
| * runtime/JSGlobalObject.cpp: |
| (JSC::JSGlobalObject::init): |
| * runtime/JSGlobalObject.h: |
| (JSC::JSGlobalObject::makePoisonedUnique): Deleted. |
| |
| 2018-01-15 Michael Catanzaro <mcatanzaro@igalia.com> |
| |
| REGRESSION(r226266): [GTK] RELEASE_ASSERT(reservedZoneSize >= minimumReservedZoneSize) in JSC::VM::updateStackLimits |
| https://bugs.webkit.org/show_bug.cgi?id=181438 |
| <rdar://problem/36376724> |
| |
| Reviewed by Carlos Garcia Campos. |
| |
| Roll out the functional changes of r226266. We'll keep the minor CMake library type setting |
| cleanup, but we have to switch back to building JSC only as a shared library, and we have to |
| get rid of the version script. |
| |
| * PlatformGTK.cmake: |
| * javascriptcoregtk-symbols.map: Removed. |
| |
| 2018-01-14 Saam Barati <sbarati@apple.com> |
| |
| Unreviewed. r226928 broke the CLOOP build. This patch fixes the CLOOP build. |
| |
| * bytecode/CallLinkStatus.cpp: |
| (JSC::CallLinkStatus::computeFromLLInt): |
| (JSC::CallLinkStatus::computeExitSiteData): |
| |
| 2018-01-13 Mark Lam <mark.lam@apple.com> |
| |
| Replace all use of ConstExprPoisoned with Poisoned. |
| https://bugs.webkit.org/show_bug.cgi?id=181542 |
| <rdar://problem/36442138> |
| |
| Reviewed by JF Bastien. |
| |
| 1. All JSC poisons are now defined in JSCPoison.h. |
| |
| 2. Change all clients to use the new poison values via the POISON() macro. |
| |
| 3. The LLInt code has been updated to handle CodeBlock poison. Some of this code |
| uses the t5 temp register, which is not available on the Windows port. |
| Fortunately, we don't currently do poisoning on the Windows port yet. So, |
| it will just work for now. |
| |
| When poisoning is enabled for the Windows port, this LLInt code will need a |
| Windows specific implementation to workaround its lack of a t5 register. |
| |
| * API/JSAPIWrapperObject.h: |
| * API/JSCallbackFunction.h: |
| * API/JSCallbackObject.h: |
| * JavaScriptCore.xcodeproj/project.pbxproj: |
| * Sources.txt: |
| * assembler/MacroAssemblerCodeRef.h: |
| (JSC::MacroAssemblerCodePtr::emptyValue): |
| (JSC::MacroAssemblerCodePtr::deletedValue): |
| * b3/B3LowerMacros.cpp: |
| * b3/testb3.cpp: |
| (JSC::B3::testInterpreter): |
| * bytecode/CodeBlock.h: |
| (JSC::CodeBlock::instructions): |
| (JSC::CodeBlock::instructions const): |
| (JSC::CodeBlock::makePoisonedUnique): |
| * dfg/DFGOSRExitCompilerCommon.h: |
| (JSC::DFG::adjustFrameAndStackInOSRExitCompilerThunk): |
| * dfg/DFGSpeculativeJIT.cpp: |
| (JSC::DFG::SpeculativeJIT::compileCheckSubClass): |
| (JSC::DFG::SpeculativeJIT::emitSwitchIntJump): |
| * ftl/FTLLowerDFGToB3.cpp: |
| (JSC::FTL::DFG::LowerDFGToB3::compileCheckSubClass): |
| * jit/JIT.h: |
| * jit/ThunkGenerators.cpp: |
| (JSC::virtualThunkFor): |
| (JSC::nativeForGenerator): |
| (JSC::boundThisNoArgsFunctionCallGenerator): |
| * llint/LowLevelInterpreter.asm: |
| * llint/LowLevelInterpreter32_64.asm: |
| * llint/LowLevelInterpreter64.asm: |
| * parser/UnlinkedSourceCode.h: |
| * runtime/ArrayPrototype.h: |
| * runtime/CustomGetterSetter.h: |
| * runtime/DateInstance.h: |
| * runtime/InternalFunction.h: |
| * runtime/JSArrayBuffer.h: |
| * runtime/JSCPoison.cpp: Copied from Source/JavaScriptCore/runtime/JSCPoisonedPtr.cpp. |
| (JSC::initializePoison): |
| * runtime/JSCPoison.h: |
| (): Deleted. |
| * runtime/JSCPoisonedPtr.cpp: Removed. |
| * runtime/JSCPoisonedPtr.h: Removed. |
| * runtime/JSGlobalObject.h: |
| (JSC::JSGlobalObject::makePoisonedUnique): |
| * runtime/JSScriptFetchParameters.h: |
| * runtime/JSScriptFetcher.h: |
| * runtime/NativeExecutable.h: |
| * runtime/StructureTransitionTable.h: |
| (JSC::StructureTransitionTable::map const): |
| (JSC::StructureTransitionTable::weakImpl const): |
| * runtime/WriteBarrier.h: |
| (JSC::WriteBarrier::poison): |
| * wasm/js/JSToWasm.cpp: |
| (JSC::Wasm::createJSToWasmWrapper): |
| * wasm/js/JSWebAssemblyCodeBlock.cpp: |
| (JSC::JSWebAssemblyCodeBlock::JSWebAssemblyCodeBlock): |
| * wasm/js/JSWebAssemblyCodeBlock.h: |
| * wasm/js/JSWebAssemblyInstance.h: |
| * wasm/js/JSWebAssemblyMemory.h: |
| * wasm/js/JSWebAssemblyModule.h: |
| * wasm/js/JSWebAssemblyTable.h: |
| * wasm/js/WasmToJS.cpp: |
| (JSC::Wasm::handleBadI64Use): |
| (JSC::Wasm::wasmToJS): |
| * wasm/js/WebAssemblyFunctionBase.h: |
| * wasm/js/WebAssemblyModuleRecord.h: |
| * wasm/js/WebAssemblyToJSCallee.h: |
| * wasm/js/WebAssemblyWrapperFunction.h: |
| |
| 2018-01-13 Caio Lima <ticaiolima@gmail.com> |
| |
| [JSC] NumberPrototype::extractRadixFromArgs incorrectly cast double to int32_t |
| https://bugs.webkit.org/show_bug.cgi?id=181182 |
| |
| Reviewed by Darin Adler. |
| |
| Casting double to integer is undefined behavior when the truncation |
| results into a value that doesn't fit into integer size, according C++ |
| spec[1]. Thus, we are changing bigIntProtoFuncToString and |
| numberProtoFuncToString to remove these source of undefined behavior. |
| |
| [1] - http://en.cppreference.com/w/cpp/language/implicit_conversion |
| |
| * runtime/BigIntPrototype.cpp: |
| (JSC::bigIntProtoFuncToString): |
| * runtime/NumberPrototype.cpp: |
| (JSC::numberProtoFuncToString): |
| (JSC::extractRadixFromArgs): Deleted. |
| (JSC::extractToStringRadixArgument): Added. |
| |
| 2018-01-12 Saam Barati <sbarati@apple.com> |
| |
| Move ExitProfile to UnlinkedCodeBlock so it can be shared amongst CodeBlocks backed by the same UnlinkedCodeBlock |
| https://bugs.webkit.org/show_bug.cgi?id=181545 |
| |
| Reviewed by Michael Saboff. |
| |
| This patch follows the theme of putting optimization profiling information on |
| UnlinkedCodeBlock. This allows the unlinked code cache to remember OSR exit data. |
| This often leads to the first compile of a CodeBlock, backed by an UnlinkedCodeBlock |
| pulled from the code cache, making better compilation decisions, usually |
| resulting in fewer exits, and fewer recompilations. |
| |
| This is a 1% Speedometer progression in my testing. |
| |
| * bytecode/BytecodeDumper.cpp: |
| (JSC::BytecodeDumper<CodeBlock>::dumpProfilesForBytecodeOffset): |
| * bytecode/CallLinkStatus.cpp: |
| (JSC::CallLinkStatus::computeFromLLInt): |
| (JSC::CallLinkStatus::computeFor): |
| (JSC::CallLinkStatus::computeExitSiteData): |
| (JSC::CallLinkStatus::computeDFGStatuses): |
| * bytecode/CallLinkStatus.h: |
| * bytecode/CodeBlock.h: |
| (JSC::CodeBlock::addFrequentExitSite): Deleted. |
| (JSC::CodeBlock::hasExitSite const): Deleted. |
| (JSC::CodeBlock::exitProfile): Deleted. |
| * bytecode/DFGExitProfile.cpp: |
| (JSC::DFG::ExitProfile::add): |
| (JSC::DFG::QueryableExitProfile::initialize): |
| * bytecode/DFGExitProfile.h: |
| (JSC::DFG::ExitProfile::hasExitSite const): |
| * bytecode/GetByIdStatus.cpp: |
| (JSC::GetByIdStatus::hasExitSite): |
| (JSC::GetByIdStatus::computeFor): |
| (JSC::GetByIdStatus::computeForStubInfo): |
| * bytecode/GetByIdStatus.h: |
| * bytecode/PutByIdStatus.cpp: |
| (JSC::PutByIdStatus::hasExitSite): |
| (JSC::PutByIdStatus::computeFor): |
| (JSC::PutByIdStatus::computeForStubInfo): |
| * bytecode/PutByIdStatus.h: |
| * bytecode/UnlinkedCodeBlock.cpp: |
| (JSC::UnlinkedCodeBlock::livenessAnalysisSlow): |
| * bytecode/UnlinkedCodeBlock.h: |
| (JSC::UnlinkedCodeBlock::hasExitSite const): |
| (JSC::UnlinkedCodeBlock::hasExitSite): |
| (JSC::UnlinkedCodeBlock::exitProfile): |
| * dfg/DFGByteCodeParser.cpp: |
| (JSC::DFG::ByteCodeParser::InlineStackEntry::InlineStackEntry): |
| * dfg/DFGGraph.h: |
| (JSC::DFG::Graph::hasGlobalExitSite): |
| (JSC::DFG::Graph::hasExitSite): |
| * dfg/DFGLICMPhase.cpp: |
| (JSC::DFG::LICMPhase::attemptHoist): |
| * dfg/DFGOSRExitBase.cpp: |
| (JSC::DFG::OSRExitBase::considerAddingAsFrequentExitSiteSlow): |
| |
| 2018-01-12 JF Bastien <jfbastien@apple.com> |
| |
| PoisonedWriteBarrier |
| https://bugs.webkit.org/show_bug.cgi?id=181599 |
| <rdar://problem/36474351> |
| |
| Reviewed by Mark Lam. |
| |
| Allow poisoning of WriteBarrier objects, and use this for |
| WebAssembly because it is perf-neutral, at least on WasmBench on |
| my MBP. If it indeed is perf-neutral according to the bots, start |
| using it in more performance-sensitive places. |
| |
| * heap/HandleTypes.h: |
| * heap/SlotVisitor.h: |
| * heap/SlotVisitorInlines.h: |
| (JSC::SlotVisitor::append): |
| (JSC::SlotVisitor::appendHidden): |
| * runtime/JSCJSValue.h: |
| * runtime/JSCPoison.h: |
| * runtime/Structure.h: |
| * runtime/StructureInlines.h: |
| (JSC::Structure::setPrototypeWithoutTransition): |
| (JSC::Structure::setGlobalObject): |
| (JSC::Structure::setPreviousID): |
| * runtime/WriteBarrier.h: |
| (JSC::WriteBarrierBase::copyFrom): |
| (JSC::WriteBarrierBase::get const): |
| (JSC::WriteBarrierBase::operator* const): |
| (JSC::WriteBarrierBase::operator-> const): |
| (JSC::WriteBarrierBase::clear): |
| (JSC::WriteBarrierBase::slot): |
| (JSC::WriteBarrierBase::operator bool const): |
| (JSC::WriteBarrierBase::setWithoutWriteBarrier): |
| (JSC::WriteBarrierBase::unvalidatedGet const): |
| (JSC::operator==): |
| * runtime/WriteBarrierInlines.h: |
| (JSC::Traits>::set): |
| (JSC::Traits>::setMayBeNull): |
| (JSC::Traits>::setEarlyValue): |
| (JSC::DumbValueTraits<Unknown>>::set): |
| * wasm/WasmInstance.h: |
| * wasm/js/JSWebAssemblyInstance.cpp: |
| (JSC::JSWebAssemblyInstance::JSWebAssemblyInstance): |
| (JSC::JSWebAssemblyInstance::finishCreation): |
| (JSC::JSWebAssemblyInstance::visitChildren): |
| (JSC::JSWebAssemblyInstance::create): |
| * wasm/js/JSWebAssemblyInstance.h: |
| (JSC::JSWebAssemblyInstance::offsetOfPoisonedCallee): |
| * wasm/js/JSWebAssemblyMemory.h: |
| * wasm/js/JSWebAssemblyModule.h: |
| * wasm/js/JSWebAssemblyTable.cpp: |
| (JSC::JSWebAssemblyTable::JSWebAssemblyTable): |
| (JSC::JSWebAssemblyTable::grow): |
| (JSC::JSWebAssemblyTable::clearFunction): |
| * wasm/js/JSWebAssemblyTable.h: |
| * wasm/js/WasmToJS.cpp: |
| (JSC::Wasm::materializeImportJSCell): |
| (JSC::Wasm::handleBadI64Use): |
| (JSC::Wasm::wasmToJS): |
| * wasm/js/WebAssemblyFunctionBase.h: |
| * wasm/js/WebAssemblyModuleRecord.cpp: |
| (JSC::WebAssemblyModuleRecord::link): |
| (JSC::WebAssemblyModuleRecord::evaluate): |
| * wasm/js/WebAssemblyModuleRecord.h: |
| * wasm/js/WebAssemblyToJSCallee.h: |
| * wasm/js/WebAssemblyWrapperFunction.h: |
| |
| 2018-01-12 Saam Barati <sbarati@apple.com> |
| |
| CheckStructure can be incorrectly subsumed by CheckStructureOrEmpty |
| https://bugs.webkit.org/show_bug.cgi?id=181177 |
| <rdar://problem/36205704> |
| |
| Reviewed by Yusuke Suzuki. |
| |
| The semantics of CheckStructure are such that it does not allow the empty value to flow through it. |
| However, we may eliminate a CheckStructure if it's preceded by a CheckStructureOrEmpty. This doesn't |
| have semantic consequences when validation is turned off. However, with validation on, this trips up |
| our OSR exit machinery that says when an exit is allowed to happen. |
| |
| Consider the following IR: |
| |
| a: GetClosureVar // Or any other node that produces BytecodeTop |
| ... |
| c: CheckStructure(Cell:@a, {s2}) |
| d: PutByOffset(KnownCell:@a, KnownCell:@a, @value) |
| |
| In the TypeCheckHoistingPhase, we may insert CheckStructureOrEmptys like this: |
| a: GetClosureVar |
| e: CheckStructureOrEmpty(@a, {s1}) |
| ... |
| f: CheckStructureOrEmpty(@a, {s2}) |
| c: CheckStructure(Cell:@a, {s2}) |
| d: PutByOffset(KnownCell:@a, KnownCell:@a, @value) |
| |
| This will cause constant folding to change the IR to: |
| a: GetClosureVar |
| e: CheckStructureOrEmpty(@a, {s1}) |
| ... |
| f: CheckStructureOrEmpty(@a, {s2}) |
| d: PutByOffset(KnownCell:@a, KnownCell:@a, @value) |
| |
| Our mayExit analysis determines that the PutByOffset should not exit. Note |
| that AI will determine the only value the PutByOffset can see in @a is |
| the empty value. Because KnownCell filters SpecCell and not SpecCellCheck, |
| when lowering the PutByOffset, we reach a contradiction in AI and emit |
| an OSR exit. However, because mayExit said we couldn't exit, we assert. |
| |
| Note that if we did not run the TypeCheckHoistingPhase on this IR, AI |
| would have determined we would OSR exit at the second CheckStructure. |
| |
| This patch makes it so constant folding produces the following IR: |
| a: GetClosureVar |
| e: CheckStructureOrEmpty(@a, {s1}) |
| g: AssertNotEmpty(@a) |
| ... |
| f: CheckStructureOrEmpty(@a, {s2}) |
| h: AssertNotEmpty(@a) |
| d: PutByOffset(KnownCell:@a, KnownCell:@a, @value) |
| |
| This modification will cause AI to know we will OSR exit before even reaching |
| the PutByOffset. Note that in the original IR, the GetClosureVar won't |
| actually produce the TDZ value. If it did, bytecode would have caused us |
| to emit a CheckNotEmpty before the CheckStructure/PutByOffset combo. That's |
| why this bug is about IR bookkeeping and not an actual error in IR analysis. |
| This patch introduces AssertNotEmpty instead of using CheckNotEmpty to be |
| more congruous with CheckStructure's semantics of crashing on the empty value |
| as input (on 64 bit platforms). |
| |
| * dfg/DFGAbstractInterpreterInlines.h: |
| (JSC::DFG::AbstractInterpreter<AbstractStateType>::executeEffects): |
| * dfg/DFGClobberize.h: |
| (JSC::DFG::clobberize): |
| * dfg/DFGConstantFoldingPhase.cpp: |
| (JSC::DFG::ConstantFoldingPhase::foldConstants): |
| * dfg/DFGDoesGC.cpp: |
| (JSC::DFG::doesGC): |
| * dfg/DFGFixupPhase.cpp: |
| (JSC::DFG::FixupPhase::fixupNode): |
| * dfg/DFGNodeType.h: |
| * dfg/DFGPredictionPropagationPhase.cpp: |
| * dfg/DFGSafeToExecute.h: |
| (JSC::DFG::safeToExecute): |
| * dfg/DFGSpeculativeJIT32_64.cpp: |
| (JSC::DFG::SpeculativeJIT::compile): |
| * dfg/DFGSpeculativeJIT64.cpp: |
| (JSC::DFG::SpeculativeJIT::compile): |
| * ftl/FTLCapabilities.cpp: |
| (JSC::FTL::canCompile): |
| * ftl/FTLLowerDFGToB3.cpp: |
| (JSC::FTL::DFG::LowerDFGToB3::compileNode): |
| (JSC::FTL::DFG::LowerDFGToB3::compileAssertNotEmpty): |
| |
| 2018-01-12 Joseph Pecoraro <pecoraro@apple.com> |
| |
| Web Inspector: Remove unnecessary raw pointer in InspectorConsoleAgent |
| https://bugs.webkit.org/show_bug.cgi?id=181579 |
| <rdar://problem/36193759> |
| |
| Reviewed by Brian Burg. |
| |
| * inspector/agents/InspectorConsoleAgent.h: |
| * inspector/agents/InspectorConsoleAgent.cpp: |
| (Inspector::InspectorConsoleAgent::clearMessages): |
| (Inspector::InspectorConsoleAgent::addConsoleMessage): |
| Switch from a raw pointer to m_consoleMessages.last(). |
| Also move the expiration check into the if block since it can only |
| happen inside here when the number of console messages changes. |
| |
| (Inspector::InspectorConsoleAgent::discardValues): |
| Also clear the expired message count when messages are cleared. |
| |
| 2018-01-12 Yusuke Suzuki <utatane.tea@gmail.com> |
| |
| [JSC] Create parallel SlotVisitors apriori |
| https://bugs.webkit.org/show_bug.cgi?id=180907 |
| |
| Reviewed by Saam Barati. |
| |
| The number of SlotVisitors are capped with the number of HeapHelperPool's threads + 2. |
| If we create these SlotVisitors apropri, we do not need to create SlotVisitors dynamically. |
| Then we do not need to grab locks while iterating all the SlotVisitors. |
| |
| In addition, we do not need to consider the case that the number of SlotVisitors increases |
| after setting up VisitCounters in MarkingConstraintSolver since the number of SlotVisitors |
| does not increase any more. |
| |
| * heap/Heap.cpp: |
| (JSC::Heap::Heap): |
| (JSC::Heap::runBeginPhase): |
| * heap/Heap.h: |
| * heap/HeapInlines.h: |
| (JSC::Heap::forEachSlotVisitor): |
| (JSC::Heap::numberOfSlotVisitors): Deleted. |
| * heap/MarkingConstraintSolver.cpp: |
| (JSC::MarkingConstraintSolver::didVisitSomething const): |
| |
| 2018-01-12 Saam Barati <sbarati@apple.com> |
| |
| Each variant of a polymorphic inlined call should be exitOK at the top of the block |
| https://bugs.webkit.org/show_bug.cgi?id=181562 |
| <rdar://problem/36445624> |
| |
| Reviewed by Yusuke Suzuki. |
| |
| Before this patch, the very first block in the switch for polymorphic call |
| inlining will have exitOK at the top. The others are not guaranteed to. |
| That was just a bug. They're all exitOK at the top. This will lead to crashes |
| in FixupPhase because we won't have a node in a block that has ExitOK, so |
| when we fixup various type checks, we assert out. |
| |
| * dfg/DFGByteCodeParser.cpp: |
| (JSC::DFG::ByteCodeParser::handleInlining): |
| |
| 2018-01-11 Keith Miller <keith_miller@apple.com> |
| |
| Rename ENABLE_ASYNC_ITERATION to ENABLE_JS_ASYNC_ITERATION |
| https://bugs.webkit.org/show_bug.cgi?id=181573 |
| |
| Reviewed by Simon Fraser. |
| |
| * Configurations/FeatureDefines.xcconfig: |
| * runtime/Options.h: |
| |
| 2018-01-11 Michael Saboff <msaboff@apple.com> |
| |
| REGRESSION(226788): AppStore Crashed @ JavaScriptCore: JSC::MacroAssemblerARM64::pushToSaveImmediateWithoutTouchingRegisters |
| https://bugs.webkit.org/show_bug.cgi?id=181570 |
| |
| Reviewed by Keith Miller. |
| |
| * assembler/MacroAssemblerARM64.h: |
| (JSC::MacroAssemblerARM64::abortWithReason): |
| Reverting these functions to use dataTempRegister and memoryTempRegister as they are |
| JIT release asserts that will crash the program. |
| |
| (JSC::MacroAssemblerARM64::pushToSaveImmediateWithoutTouchingRegisters): |
| Changed this so that it invalidates any cached dataTmpRegister contents if temp register |
| caching is enabled. |
| |
| 2018-01-11 Filip Pizlo <fpizlo@apple.com> |
| |
| Rename MarkedAllocator to BlockDirectory and AllocatorAttributes to CellAttributes |
| https://bugs.webkit.org/show_bug.cgi?id=181543 |
| |
| Rubber stamped by Michael Saboff. |
| |
| In a world that has thread-local caches, the thing we now call the "MarkedAllocator" doesn't |
| really have anything to do with allocation anymore. The allocation will be done by something |
| in the TLC. When you move the allocation logic out of MarkedAllocator, it becomes just a |
| place to find blocks (a "block directory"). |
| |
| Once we do that renaming, the term "allocator attributes" becomes weird. Those are really the |
| attributes of the HeapCellType. So let's call them CellAttributes. |
| |
| * JavaScriptCore.xcodeproj/project.pbxproj: |
| * Sources.txt: |
| * bytecode/AccessCase.cpp: |
| (JSC::AccessCase::generateImpl): |
| * bytecode/ObjectAllocationProfile.h: |
| * bytecode/ObjectAllocationProfileInlines.h: |
| (JSC::ObjectAllocationProfile::initializeProfile): |
| * dfg/DFGSpeculativeJIT.cpp: |
| (JSC::DFG::SpeculativeJIT::emitAllocateRawObject): |
| (JSC::DFG::SpeculativeJIT::compileMakeRope): |
| (JSC::DFG::SpeculativeJIT::compileAllocatePropertyStorage): |
| (JSC::DFG::SpeculativeJIT::compileReallocatePropertyStorage): |
| (JSC::DFG::SpeculativeJIT::compileNewObject): |
| * dfg/DFGSpeculativeJIT.h: |
| (JSC::DFG::SpeculativeJIT::emitAllocateJSCell): |
| (JSC::DFG::SpeculativeJIT::emitAllocateJSObject): |
| * ftl/FTLAbstractHeapRepository.h: |
| * ftl/FTLLowerDFGToB3.cpp: |
| (JSC::FTL::DFG::LowerDFGToB3::compileMakeRope): |
| (JSC::FTL::DFG::LowerDFGToB3::compileMaterializeNewObject): |
| (JSC::FTL::DFG::LowerDFGToB3::allocatePropertyStorageWithSizeImpl): |
| (JSC::FTL::DFG::LowerDFGToB3::allocateHeapCell): |
| (JSC::FTL::DFG::LowerDFGToB3::allocateObject): |
| (JSC::FTL::DFG::LowerDFGToB3::allocatorForSize): |
| * heap/AlignedMemoryAllocator.cpp: |
| (JSC::AlignedMemoryAllocator::registerDirectory): |
| (JSC::AlignedMemoryAllocator::registerAllocator): Deleted. |
| * heap/AlignedMemoryAllocator.h: |
| (JSC::AlignedMemoryAllocator::firstDirectory const): |
| (JSC::AlignedMemoryAllocator::firstAllocator const): Deleted. |
| * heap/AllocatorAttributes.cpp: Removed. |
| * heap/AllocatorAttributes.h: Removed. |
| * heap/BlockDirectory.cpp: Copied from Source/JavaScriptCore/heap/MarkedAllocator.cpp. |
| (JSC::BlockDirectory::BlockDirectory): |
| (JSC::BlockDirectory::setSubspace): |
| (JSC::BlockDirectory::isPagedOut): |
| (JSC::BlockDirectory::findEmptyBlockToSteal): |
| (JSC::BlockDirectory::didConsumeFreeList): |
| (JSC::BlockDirectory::tryAllocateWithoutCollecting): |
| (JSC::BlockDirectory::allocateIn): |
| (JSC::BlockDirectory::tryAllocateIn): |
| (JSC::BlockDirectory::doTestCollectionsIfNeeded): |
| (JSC::BlockDirectory::allocateSlowCase): |
| (JSC::BlockDirectory::blockSizeForBytes): |
| (JSC::BlockDirectory::tryAllocateBlock): |
| (JSC::BlockDirectory::addBlock): |
| (JSC::BlockDirectory::removeBlock): |
| (JSC::BlockDirectory::stopAllocating): |
| (JSC::BlockDirectory::prepareForAllocation): |
| (JSC::BlockDirectory::lastChanceToFinalize): |
| (JSC::BlockDirectory::resumeAllocating): |
| (JSC::BlockDirectory::beginMarkingForFullCollection): |
| (JSC::BlockDirectory::endMarking): |
| (JSC::BlockDirectory::snapshotUnsweptForEdenCollection): |
| (JSC::BlockDirectory::snapshotUnsweptForFullCollection): |
| (JSC::BlockDirectory::findBlockToSweep): |
| (JSC::BlockDirectory::sweep): |
| (JSC::BlockDirectory::shrink): |
| (JSC::BlockDirectory::assertNoUnswept): |
| (JSC::BlockDirectory::parallelNotEmptyBlockSource): |
| (JSC::BlockDirectory::dump const): |
| (JSC::BlockDirectory::dumpBits): |
| (JSC::BlockDirectory::markedSpace const): |
| (JSC::MarkedAllocator::MarkedAllocator): Deleted. |
| (JSC::MarkedAllocator::setSubspace): Deleted. |
| (JSC::MarkedAllocator::isPagedOut): Deleted. |
| (JSC::MarkedAllocator::findEmptyBlockToSteal): Deleted. |
| (JSC::MarkedAllocator::didConsumeFreeList): Deleted. |
| (JSC::MarkedAllocator::tryAllocateWithoutCollecting): Deleted. |
| (JSC::MarkedAllocator::allocateIn): Deleted. |
| (JSC::MarkedAllocator::tryAllocateIn): Deleted. |
| (JSC::MarkedAllocator::doTestCollectionsIfNeeded): Deleted. |
| (JSC::MarkedAllocator::allocateSlowCase): Deleted. |
| (JSC::MarkedAllocator::blockSizeForBytes): Deleted. |
| (JSC::MarkedAllocator::tryAllocateBlock): Deleted. |
| (JSC::MarkedAllocator::addBlock): Deleted. |
| (JSC::MarkedAllocator::removeBlock): Deleted. |
| (JSC::MarkedAllocator::stopAllocating): Deleted. |
| (JSC::MarkedAllocator::prepareForAllocation): Deleted. |
| (JSC::MarkedAllocator::lastChanceToFinalize): Deleted. |
| (JSC::MarkedAllocator::resumeAllocating): Deleted. |
| (JSC::MarkedAllocator::beginMarkingForFullCollection): Deleted. |
| (JSC::MarkedAllocator::endMarking): Deleted. |
| (JSC::MarkedAllocator::snapshotUnsweptForEdenCollection): Deleted. |
| (JSC::MarkedAllocator::snapshotUnsweptForFullCollection): Deleted. |
| (JSC::MarkedAllocator::findBlockToSweep): Deleted. |
| (JSC::MarkedAllocator::sweep): Deleted. |
| (JSC::MarkedAllocator::shrink): Deleted. |
| (JSC::MarkedAllocator::assertNoUnswept): Deleted. |
| (JSC::MarkedAllocator::parallelNotEmptyBlockSource): Deleted. |
| (JSC::MarkedAllocator::dump const): Deleted. |
| (JSC::MarkedAllocator::dumpBits): Deleted. |
| (JSC::MarkedAllocator::markedSpace const): Deleted. |
| * heap/BlockDirectory.h: Copied from Source/JavaScriptCore/heap/MarkedAllocator.h. |
| (JSC::BlockDirectory::attributes const): |
| (JSC::BlockDirectory::forEachBitVector): |
| (JSC::BlockDirectory::forEachBitVectorWithName): |
| (JSC::BlockDirectory::nextDirectory const): |
| (JSC::BlockDirectory::nextDirectoryInSubspace const): |
| (JSC::BlockDirectory::nextDirectoryInAlignedMemoryAllocator const): |
| (JSC::BlockDirectory::setNextDirectory): |
| (JSC::BlockDirectory::setNextDirectoryInSubspace): |
| (JSC::BlockDirectory::setNextDirectoryInAlignedMemoryAllocator): |
| (JSC::BlockDirectory::offsetOfFreeList): |
| (JSC::BlockDirectory::offsetOfCellSize): |
| (JSC::MarkedAllocator::cellSize const): Deleted. |
| (JSC::MarkedAllocator::attributes const): Deleted. |
| (JSC::MarkedAllocator::needsDestruction const): Deleted. |
| (JSC::MarkedAllocator::destruction const): Deleted. |
| (JSC::MarkedAllocator::cellKind const): Deleted. |
| (JSC::MarkedAllocator::heap): Deleted. |
| (JSC::MarkedAllocator::bitvectorLock): Deleted. |
| (JSC::MarkedAllocator::forEachBitVector): Deleted. |
| (JSC::MarkedAllocator::forEachBitVectorWithName): Deleted. |
| (JSC::MarkedAllocator::nextAllocator const): Deleted. |
| (JSC::MarkedAllocator::nextAllocatorInSubspace const): Deleted. |
| (JSC::MarkedAllocator::nextAllocatorInAlignedMemoryAllocator const): Deleted. |
| (JSC::MarkedAllocator::setNextAllocator): Deleted. |
| (JSC::MarkedAllocator::setNextAllocatorInSubspace): Deleted. |
| (JSC::MarkedAllocator::setNextAllocatorInAlignedMemoryAllocator): Deleted. |
| (JSC::MarkedAllocator::subspace const): Deleted. |
| (JSC::MarkedAllocator::freeList const): Deleted. |
| (JSC::MarkedAllocator::offsetOfFreeList): Deleted. |
| (JSC::MarkedAllocator::offsetOfCellSize): Deleted. |
| * heap/BlockDirectoryInlines.h: Copied from Source/JavaScriptCore/heap/MarkedAllocatorInlines.h. |
| (JSC::BlockDirectory::isFreeListedCell const): |
| (JSC::BlockDirectory::allocate): |
| (JSC::BlockDirectory::forEachBlock): |
| (JSC::BlockDirectory::forEachNotEmptyBlock): |
| (JSC::MarkedAllocator::isFreeListedCell const): Deleted. |
| (JSC::MarkedAllocator::allocate): Deleted. |
| (JSC::MarkedAllocator::forEachBlock): Deleted. |
| (JSC::MarkedAllocator::forEachNotEmptyBlock): Deleted. |
| * heap/CellAttributes.cpp: Copied from Source/JavaScriptCore/heap/AllocatorAttributes.cpp. |
| (JSC::CellAttributes::dump const): |
| (JSC::AllocatorAttributes::dump const): Deleted. |
| * heap/CellAttributes.h: Copied from Source/JavaScriptCore/heap/AllocatorAttributes.h. |
| (JSC::CellAttributes::CellAttributes): |
| (JSC::AllocatorAttributes::AllocatorAttributes): Deleted. |
| * heap/CompleteSubspace.cpp: |
| (JSC::CompleteSubspace::allocatorFor): |
| (JSC::CompleteSubspace::allocateNonVirtual): |
| (JSC::CompleteSubspace::allocatorForSlow): |
| (JSC::CompleteSubspace::tryAllocateSlow): |
| * heap/CompleteSubspace.h: |
| (JSC::CompleteSubspace::allocatorForSizeStep): |
| (JSC::CompleteSubspace::allocatorForNonVirtual): |
| * heap/GCDeferralContext.h: |
| * heap/Heap.cpp: |
| (JSC::Heap::updateAllocationLimits): |
| * heap/Heap.h: |
| * heap/HeapCell.h: |
| * heap/HeapCellInlines.h: |
| (JSC::HeapCell::cellAttributes const): |
| (JSC::HeapCell::destructionMode const): |
| (JSC::HeapCell::cellKind const): |
| (JSC::HeapCell::allocatorAttributes const): Deleted. |
| * heap/HeapCellType.cpp: |
| (JSC::HeapCellType::HeapCellType): |
| * heap/HeapCellType.h: |
| (JSC::HeapCellType::attributes const): |
| * heap/IncrementalSweeper.cpp: |
| (JSC::IncrementalSweeper::IncrementalSweeper): |
| (JSC::IncrementalSweeper::sweepNextBlock): |
| (JSC::IncrementalSweeper::startSweeping): |
| (JSC::IncrementalSweeper::stopSweeping): |
| * heap/IncrementalSweeper.h: |
| * heap/IsoCellSet.cpp: |
| (JSC::IsoCellSet::IsoCellSet): |
| (JSC::IsoCellSet::parallelNotEmptyMarkedBlockSource): |
| (JSC::IsoCellSet::addSlow): |
| (JSC::IsoCellSet::didRemoveBlock): |
| (JSC::IsoCellSet::sweepToFreeList): |
| * heap/IsoCellSetInlines.h: |
| (JSC::IsoCellSet::forEachMarkedCell): |
| (JSC::IsoCellSet::forEachLiveCell): |
| * heap/IsoSubspace.cpp: |
| (JSC::IsoSubspace::IsoSubspace): |
| (JSC::IsoSubspace::allocatorFor): |
| (JSC::IsoSubspace::allocateNonVirtual): |
| * heap/IsoSubspace.h: |
| (JSC::IsoSubspace::allocatorForNonVirtual): |
| * heap/LargeAllocation.h: |
| (JSC::LargeAllocation::attributes const): |
| * heap/MarkedAllocator.cpp: Removed. |
| * heap/MarkedAllocator.h: Removed. |
| * heap/MarkedAllocatorInlines.h: Removed. |
| * heap/MarkedBlock.cpp: |
| (JSC::MarkedBlock::Handle::~Handle): |
| (JSC::MarkedBlock::Handle::setIsFreeListed): |
| (JSC::MarkedBlock::Handle::stopAllocating): |
| (JSC::MarkedBlock::Handle::lastChanceToFinalize): |
| (JSC::MarkedBlock::Handle::resumeAllocating): |
| (JSC::MarkedBlock::aboutToMarkSlow): |
| (JSC::MarkedBlock::Handle::didConsumeFreeList): |
| (JSC::MarkedBlock::noteMarkedSlow): |
| (JSC::MarkedBlock::Handle::removeFromDirectory): |
| (JSC::MarkedBlock::Handle::didAddToDirectory): |
| (JSC::MarkedBlock::Handle::didRemoveFromDirectory): |
| (JSC::MarkedBlock::Handle::dumpState): |
| (JSC::MarkedBlock::Handle::subspace const): |
| (JSC::MarkedBlock::Handle::sweep): |
| (JSC::MarkedBlock::Handle::isFreeListedCell const): |
| (JSC::MarkedBlock::Handle::removeFromAllocator): Deleted. |
| (JSC::MarkedBlock::Handle::didAddToAllocator): Deleted. |
| (JSC::MarkedBlock::Handle::didRemoveFromAllocator): Deleted. |
| * heap/MarkedBlock.h: |
| (JSC::MarkedBlock::Handle::directory const): |
| (JSC::MarkedBlock::Handle::attributes const): |
| (JSC::MarkedBlock::attributes const): |
| (JSC::MarkedBlock::Handle::allocator const): Deleted. |
| * heap/MarkedBlockInlines.h: |
| (JSC::MarkedBlock::Handle::isAllocated): |
| (JSC::MarkedBlock::Handle::isLive): |
| (JSC::MarkedBlock::Handle::specializedSweep): |
| (JSC::MarkedBlock::Handle::isEmpty): |
| * heap/MarkedSpace.cpp: |
| (JSC::MarkedSpace::lastChanceToFinalize): |
| (JSC::MarkedSpace::sweep): |
| (JSC::MarkedSpace::stopAllocating): |
| (JSC::MarkedSpace::resumeAllocating): |
| (JSC::MarkedSpace::isPagedOut): |
| (JSC::MarkedSpace::freeBlock): |
| (JSC::MarkedSpace::shrink): |
| (JSC::MarkedSpace::beginMarking): |
| (JSC::MarkedSpace::endMarking): |
| (JSC::MarkedSpace::snapshotUnswept): |
| (JSC::MarkedSpace::assertNoUnswept): |
| (JSC::MarkedSpace::dumpBits): |
| (JSC::MarkedSpace::addBlockDirectory): |
| (JSC::MarkedSpace::addMarkedAllocator): Deleted. |
| * heap/MarkedSpace.h: |
| (JSC::MarkedSpace::firstDirectory const): |
| (JSC::MarkedSpace::directoryLock): |
| (JSC::MarkedSpace::forEachBlock): |
| (JSC::MarkedSpace::forEachDirectory): |
| (JSC::MarkedSpace::firstAllocator const): Deleted. |
| (JSC::MarkedSpace::allocatorLock): Deleted. |
| (JSC::MarkedSpace::forEachAllocator): Deleted. |
| * heap/MarkedSpaceInlines.h: |
| * heap/Subspace.cpp: |
| (JSC::Subspace::initialize): |
| (JSC::Subspace::prepareForAllocation): |
| (JSC::Subspace::findEmptyBlockToSteal): |
| (JSC::Subspace::parallelDirectorySource): |
| (JSC::Subspace::parallelNotEmptyMarkedBlockSource): |
| (JSC::Subspace::sweep): |
| (JSC::Subspace::parallelAllocatorSource): Deleted. |
| * heap/Subspace.h: |
| (JSC::Subspace::attributes const): |
| (JSC::Subspace::didCreateFirstDirectory): |
| (JSC::Subspace::didCreateFirstAllocator): Deleted. |
| * heap/SubspaceInlines.h: |
| (JSC::Subspace::forEachDirectory): |
| (JSC::Subspace::forEachMarkedBlock): |
| (JSC::Subspace::forEachNotEmptyMarkedBlock): |
| (JSC::Subspace::forEachAllocator): Deleted. |
| * jit/AssemblyHelpers.h: |
| (JSC::AssemblyHelpers::emitAllocateWithNonNullAllocator): |
| (JSC::AssemblyHelpers::emitAllocate): |
| (JSC::AssemblyHelpers::emitAllocateJSCell): |
| (JSC::AssemblyHelpers::emitAllocateJSObject): |
| (JSC::AssemblyHelpers::emitAllocateJSObjectWithKnownSize): |
| * jit/JIT.h: |
| * jit/JITOpcodes.cpp: |
| (JSC::JIT::emit_op_new_object): |
| * jit/JITOpcodes32_64.cpp: |
| (JSC::JIT::emit_op_new_object): |
| * runtime/JSDestructibleObjectHeapCellType.cpp: |
| (JSC::JSDestructibleObjectHeapCellType::JSDestructibleObjectHeapCellType): |
| * runtime/JSSegmentedVariableObjectHeapCellType.cpp: |
| (JSC::JSSegmentedVariableObjectHeapCellType::JSSegmentedVariableObjectHeapCellType): |
| * runtime/JSStringHeapCellType.cpp: |
| (JSC::JSStringHeapCellType::JSStringHeapCellType): |
| * runtime/VM.cpp: |
| (JSC::VM::VM): |
| * wasm/js/JSWebAssemblyCodeBlockHeapCellType.cpp: |
| (JSC::JSWebAssemblyCodeBlockHeapCellType::JSWebAssemblyCodeBlockHeapCellType): |
| |
| 2018-01-11 Saam Barati <sbarati@apple.com> |
| |
| When inserting Unreachable in byte code parser we need to flush all the right things |
| https://bugs.webkit.org/show_bug.cgi?id=181509 |
| <rdar://problem/36423110> |
| |
| Reviewed by Mark Lam. |
| |
| I added code in r226655 that had its own mechanism for preserving liveness when |
| inserting Unreachable nodes after ForceOSRExit. There are two ways to preserve |
| liveness: PhantomLocal and Flush. Certain values *must* be flushed to the stack. |
| I got some of these values wrong, which was leading to a crash when recovering the |
| callee value from an inlined frame. Instead of making the same mistake and repeating |
| similar code again, this patch refactors this logic to be shared with the other |
| liveness preservation code in the DFG bytecode parser. This is what I should have |
| done in my initial patch. |
| |
| * bytecode/InlineCallFrame.h: |
| (JSC::remapOperand): |
| * dfg/DFGByteCodeParser.cpp: |
| (JSC::DFG::flushImpl): |
| (JSC::DFG::flushForTerminalImpl): |
| (JSC::DFG::ByteCodeParser::flush): |
| (JSC::DFG::ByteCodeParser::flushForTerminal): |
| (JSC::DFG::ByteCodeParser::parse): |
| |
| 2018-01-11 Saam Barati <sbarati@apple.com> |
| |
| JITMathIC code in the FTL is wrong when code gets duplicated |
| https://bugs.webkit.org/show_bug.cgi?id=181525 |
| <rdar://problem/36351993> |
| |
| Reviewed by Michael Saboff and Keith Miller. |
| |
| B3/Air may duplicate code for various reasons. Patchpoint generators inside |
| FTLLower must be aware that they can be called multiple times because of this. |
| The patchpoint for math ICs was not aware of this, and shared state amongst |
| all invocations of the patchpoint's generator. This patch fixes this bug so |
| that each invocation of the patchpoint's generator gets a unique math IC. |
| |
| * bytecode/CodeBlock.h: |
| (JSC::CodeBlock::addMathIC): |
| * ftl/FTLLowerDFGToB3.cpp: |
| (JSC::FTL::DFG::LowerDFGToB3::compileValueAdd): |
| (JSC::FTL::DFG::LowerDFGToB3::compileUnaryMathIC): |
| (JSC::FTL::DFG::LowerDFGToB3::compileBinaryMathIC): |
| (JSC::FTL::DFG::LowerDFGToB3::compileArithAddOrSub): |
| (JSC::FTL::DFG::LowerDFGToB3::compileArithMul): |
| (JSC::FTL::DFG::LowerDFGToB3::compileArithNegate): |
| (JSC::FTL::DFG::LowerDFGToB3::compileMathIC): Deleted. |
| * jit/JITMathIC.h: |
| (JSC::isProfileEmpty): |
| |
| 2018-01-11 Michael Saboff <msaboff@apple.com> |
| |
| Ensure there are no unsafe uses of MacroAssemblerARM64::dataTempRegister |
| https://bugs.webkit.org/show_bug.cgi?id=181512 |
| |
| Reviewed by Saam Barati. |
| |
| * assembler/MacroAssemblerARM64.h: |
| (JSC::MacroAssemblerARM64::abortWithReason): |
| (JSC::MacroAssemblerARM64::pushToSaveImmediateWithoutTouchingRegisters): |
| All current uses of dataTempRegister in these functions are safe, but it makes sense to |
| fix them in case they might be used elsewhere. |
| |
| 2018-01-04 Filip Pizlo <fpizlo@apple.com> |
| |
| CodeBlocks should be in IsoSubspaces |
| https://bugs.webkit.org/show_bug.cgi?id=180884 |
| |
| Reviewed by Saam Barati. |
| |
| This moves CodeBlocks into IsoSubspaces. Doing so means that we no longer need to have the |
| special CodeBlockSet HashSets of new and old CodeBlocks. We also no longer use |
| WeakReferenceHarvester or UnconditionalFinalizer. Instead: |
| |
| - Code block sweeping is now just eager sweeping. This means that it automatically takes |
| advantage of our unswept set, which roughly corresponds to what CodeBlockSet used to use |
| its eden set for. |
| |
| - Those idea of Executable "weakly visiting" the CodeBlock is replaced by Executable |
| marking a ExecutableToCodeBlockEdge object. That object being marked corresponds to what |
| we used to call CodeBlock "having been weakly visited". This means that CodeBlockSet no |
| longer has to clear the set of weakly visited code blocks. This also means that |
| determining CodeBlock liveness, propagating CodeBlock transitions, and jettisoning |
| CodeBlocks during GC are now the edge's job. The edge is also in an IsoSubspace and it |
| has IsoCellSets to tell us which edges have output constraints (what we used to call |
| CodeBlock's weak reference harvester) and which have unconditional finalizers. |
| |
| - CodeBlock now uses an IsoCellSet to tell if it has an unconditional finalizer. |
| |
| - CodeBlockSet still exists! It has one unified HashSet of CodeBlocks that we use to |
| handle requests from the sampler, debugger, and other facilities. They may want to ask |
| if some pointer corresponds to a CodeBlock during stages of execution during which the |
| GC is unable to answer isLive() queries. The trickiest is the sampling profiler thread. |
| There is no way that the GC's isLive could tell us of a CodeBlock that had already been |
| allocated has now been full constructed. |
| |
| Rolling this back in because it was rolled out by mistake. There was a flaky crash that was |
| happening before and after this change, but we misread the revision numbers at first and |
| thought that this was the cause. |
| |
| * JavaScriptCore.xcodeproj/project.pbxproj: |
| * Sources.txt: |
| * bytecode/CodeBlock.cpp: |
| (JSC::CodeBlock::CodeBlock): |
| (JSC::CodeBlock::finishCreation): |
| (JSC::CodeBlock::finishCreationCommon): |
| (JSC::CodeBlock::~CodeBlock): |
| (JSC::CodeBlock::visitChildren): |
| (JSC::CodeBlock::propagateTransitions): |
| (JSC::CodeBlock::determineLiveness): |
| (JSC::CodeBlock::finalizeUnconditionally): |
| (JSC::CodeBlock::stronglyVisitStrongReferences): |
| (JSC::CodeBlock::hasInstalledVMTrapBreakpoints const): |
| (JSC::CodeBlock::installVMTrapBreakpoints): |
| (JSC::CodeBlock::dumpMathICStats): |
| (JSC::CodeBlock::visitWeakly): Deleted. |
| (JSC::CodeBlock::WeakReferenceHarvester::visitWeakReferences): Deleted. |
| (JSC::CodeBlock::UnconditionalFinalizer::finalizeUnconditionally): Deleted. |
| * bytecode/CodeBlock.h: |
| (JSC::CodeBlock::subspaceFor): |
| (JSC::CodeBlock::ownerEdge const): |
| (JSC::CodeBlock::clearVisitWeaklyHasBeenCalled): Deleted. |
| * bytecode/EvalCodeBlock.h: |
| (JSC::EvalCodeBlock::create): Deleted. |
| (JSC::EvalCodeBlock::createStructure): Deleted. |
| (JSC::EvalCodeBlock::variable): Deleted. |
| (JSC::EvalCodeBlock::numVariables): Deleted. |
| (JSC::EvalCodeBlock::functionHoistingCandidate): Deleted. |
| (JSC::EvalCodeBlock::numFunctionHoistingCandidates): Deleted. |
| (JSC::EvalCodeBlock::EvalCodeBlock): Deleted. |
| (JSC::EvalCodeBlock::unlinkedEvalCodeBlock const): Deleted. |
| * bytecode/ExecutableToCodeBlockEdge.cpp: Added. |
| (JSC::ExecutableToCodeBlockEdge::createStructure): |
| (JSC::ExecutableToCodeBlockEdge::create): |
| (JSC::ExecutableToCodeBlockEdge::visitChildren): |
| (JSC::ExecutableToCodeBlockEdge::visitOutputConstraints): |
| (JSC::ExecutableToCodeBlockEdge::finalizeUnconditionally): |
| (JSC::ExecutableToCodeBlockEdge::activate): |
| (JSC::ExecutableToCodeBlockEdge::deactivate): |
| (JSC::ExecutableToCodeBlockEdge::deactivateAndUnwrap): |
| (JSC::ExecutableToCodeBlockEdge::wrap): |
| (JSC::ExecutableToCodeBlockEdge::wrapAndActivate): |
| (JSC::ExecutableToCodeBlockEdge::ExecutableToCodeBlockEdge): |
| (JSC::ExecutableToCodeBlockEdge::runConstraint): |
| * bytecode/ExecutableToCodeBlockEdge.h: Added. |
| (JSC::ExecutableToCodeBlockEdge::subspaceFor): |
| (JSC::ExecutableToCodeBlockEdge::codeBlock const): |
| (JSC::ExecutableToCodeBlockEdge::unwrap): |
| * bytecode/FunctionCodeBlock.h: |
| (JSC::FunctionCodeBlock::subspaceFor): |
| (JSC::FunctionCodeBlock::createStructure): |
| * bytecode/ModuleProgramCodeBlock.h: |
| (JSC::ModuleProgramCodeBlock::create): Deleted. |
| (JSC::ModuleProgramCodeBlock::createStructure): Deleted. |
| (JSC::ModuleProgramCodeBlock::ModuleProgramCodeBlock): Deleted. |
| * bytecode/ProgramCodeBlock.h: |
| (JSC::ProgramCodeBlock::create): Deleted. |
| (JSC::ProgramCodeBlock::createStructure): Deleted. |
| (JSC::ProgramCodeBlock::ProgramCodeBlock): Deleted. |
| * debugger/Debugger.cpp: |
| (JSC::Debugger::SetSteppingModeFunctor::operator() const): |
| (JSC::Debugger::ToggleBreakpointFunctor::operator() const): |
| (JSC::Debugger::ClearCodeBlockDebuggerRequestsFunctor::operator() const): |
| (JSC::Debugger::ClearDebuggerRequestsFunctor::operator() const): |
| * heap/CodeBlockSet.cpp: |
| (JSC::CodeBlockSet::contains): |
| (JSC::CodeBlockSet::dump const): |
| (JSC::CodeBlockSet::add): |
| (JSC::CodeBlockSet::remove): |
| (JSC::CodeBlockSet::promoteYoungCodeBlocks): Deleted. |
| (JSC::CodeBlockSet::clearMarksForFullCollection): Deleted. |
| (JSC::CodeBlockSet::lastChanceToFinalize): Deleted. |
| (JSC::CodeBlockSet::deleteUnmarkedAndUnreferenced): Deleted. |
| * heap/CodeBlockSet.h: |
| * heap/CodeBlockSetInlines.h: |
| (JSC::CodeBlockSet::iterate): |
| (JSC::CodeBlockSet::iterateViaSubspaces): |
| * heap/ConservativeRoots.cpp: |
| (JSC::ConservativeRoots::genericAddPointer): |
| (JSC::DummyMarkHook::markKnownJSCell): |
| (JSC::CompositeMarkHook::mark): |
| (JSC::CompositeMarkHook::markKnownJSCell): |
| * heap/ConservativeRoots.h: |
| * heap/Heap.cpp: |
| (JSC::Heap::lastChanceToFinalize): |
| (JSC::Heap::finalizeMarkedUnconditionalFinalizers): |
| (JSC::Heap::finalizeUnconditionalFinalizers): |
| (JSC::Heap::beginMarking): |
| (JSC::Heap::deleteUnmarkedCompiledCode): |
| (JSC::Heap::sweepInFinalize): |
| (JSC::Heap::forEachCodeBlockImpl): |
| (JSC::Heap::forEachCodeBlockIgnoringJITPlansImpl): |
| (JSC::Heap::addCoreConstraints): |
| (JSC::Heap::finalizeUnconditionalFinalizersInIsoSubspace): Deleted. |
| * heap/Heap.h: |
| * heap/HeapCell.h: |
| * heap/HeapCellInlines.h: |
| (JSC::HeapCell::subspace const): |
| * heap/HeapInlines.h: |
| (JSC::Heap::forEachCodeBlock): |
| (JSC::Heap::forEachCodeBlockIgnoringJITPlans): |
| * heap/HeapUtil.h: |
| (JSC::HeapUtil::findGCObjectPointersForMarking): |
| * heap/IsoCellSet.cpp: |
| (JSC::IsoCellSet::parallelNotEmptyMarkedBlockSource): |
| * heap/IsoCellSet.h: |
| * heap/IsoCellSetInlines.h: |
| (JSC::IsoCellSet::forEachMarkedCellInParallel): |
| (JSC::IsoCellSet::forEachLiveCell): |
| * heap/LargeAllocation.h: |
| (JSC::LargeAllocation::subspace const): |
| * heap/MarkStackMergingConstraint.cpp: |
| (JSC::MarkStackMergingConstraint::executeImpl): |
| * heap/MarkStackMergingConstraint.h: |
| * heap/MarkedAllocator.cpp: |
| (JSC::MarkedAllocator::parallelNotEmptyBlockSource): |
| * heap/MarkedBlock.cpp: |
| (JSC::MarkedBlock::Handle::didAddToAllocator): |
| (JSC::MarkedBlock::Handle::didRemoveFromAllocator): |
| * heap/MarkedBlock.h: |
| (JSC::MarkedBlock::subspace const): |
| * heap/MarkedBlockInlines.h: |
| (JSC::MarkedBlock::Handle::forEachLiveCell): |
| * heap/MarkedSpaceInlines.h: |
| (JSC::MarkedSpace::forEachLiveCell): |
| * heap/MarkingConstraint.cpp: |
| (JSC::MarkingConstraint::execute): |
| (JSC::MarkingConstraint::doParallelWork): |
| (JSC::MarkingConstraint::finishParallelWork): Deleted. |
| (JSC::MarkingConstraint::doParallelWorkImpl): Deleted. |
| (JSC::MarkingConstraint::finishParallelWorkImpl): Deleted. |
| * heap/MarkingConstraint.h: |
| * heap/MarkingConstraintSet.cpp: |
| (JSC::MarkingConstraintSet::add): |
| * heap/MarkingConstraintSet.h: |
| (JSC::MarkingConstraintSet::add): |
| * heap/MarkingConstraintSolver.cpp: |
| (JSC::MarkingConstraintSolver::execute): |
| (JSC::MarkingConstraintSolver::addParallelTask): |
| (JSC::MarkingConstraintSolver::runExecutionThread): |
| (JSC::MarkingConstraintSolver::didExecute): Deleted. |
| * heap/MarkingConstraintSolver.h: |
| (JSC::MarkingConstraintSolver::TaskWithConstraint::TaskWithConstraint): |
| (JSC::MarkingConstraintSolver::TaskWithConstraint::operator== const): |
| * heap/SimpleMarkingConstraint.cpp: |
| (JSC::SimpleMarkingConstraint::SimpleMarkingConstraint): |
| (JSC::SimpleMarkingConstraint::executeImpl): |
| * heap/SimpleMarkingConstraint.h: |
| (JSC::SimpleMarkingConstraint::SimpleMarkingConstraint): |
| * heap/SlotVisitor.cpp: |
| (JSC::SlotVisitor::addParallelConstraintTask): |
| * heap/SlotVisitor.h: |
| * heap/Subspace.cpp: |
| (JSC::Subspace::sweep): |
| * heap/Subspace.h: |
| * heap/SubspaceInlines.h: |
| (JSC::Subspace::forEachLiveCell): |
| * llint/LowLevelInterpreter.asm: |
| * runtime/EvalExecutable.cpp: |
| (JSC::EvalExecutable::visitChildren): |
| * runtime/EvalExecutable.h: |
| (JSC::EvalExecutable::codeBlock): |
| * runtime/FunctionExecutable.cpp: |
| (JSC::FunctionExecutable::baselineCodeBlockFor): |
| (JSC::FunctionExecutable::visitChildren): |
| * runtime/FunctionExecutable.h: |
| * runtime/JSType.h: |
| * runtime/ModuleProgramExecutable.cpp: |
| (JSC::ModuleProgramExecutable::visitChildren): |
| * runtime/ModuleProgramExecutable.h: |
| * runtime/ProgramExecutable.cpp: |
| (JSC::ProgramExecutable::visitChildren): |
| * runtime/ProgramExecutable.h: |
| * runtime/ScriptExecutable.cpp: |
| (JSC::ScriptExecutable::installCode): |
| (JSC::ScriptExecutable::newReplacementCodeBlockFor): |
| * runtime/VM.cpp: |
| (JSC::VM::VM): |
| * runtime/VM.h: |
| (JSC::VM::SpaceAndFinalizerSet::SpaceAndFinalizerSet): |
| (JSC::VM::SpaceAndFinalizerSet::finalizerSetFor): |
| (JSC::VM::forEachCodeBlockSpace): |
| * runtime/VMTraps.cpp: |
| (JSC::VMTraps::handleTraps): |
| * tools/VMInspector.cpp: |
| (JSC::VMInspector::codeBlockForMachinePC): |
| (JSC::VMInspector::isValidCodeBlock): |
| |
| 2018-01-11 Michael Saboff <msaboff@apple.com> |
| |
| Add a DOM gadget for Spectre testing |
| https://bugs.webkit.org/show_bug.cgi?id=181351 |
| |
| Reviewed by Ryosuke Niwa. |
| |
| * runtime/Options.h: |
| |
| 2018-01-11 Yusuke Suzuki <utatane.tea@gmail.com> |
| |
| [DFG][FTL] regExpMatchFast should be handled |
| https://bugs.webkit.org/show_bug.cgi?id=180988 |
| |
| Reviewed by Mark Lam. |
| |
| RegExp.prototype.@@match has a fast path, @regExpMatchFast. This patch annotates this function |
| with RegExpMatchFastIntrinsic, and introduces RegExpMatch DFG node. This paves the way to |
| make NewRegexp PhantomNewRegexp if it is not used except for setting/getting its lastIndex property. |
| |
| To improve RegExp.prototype.@@match's performance more, we make this builtin function small by moving |
| slow path part to `@matchSlow()` private function. |
| |
| It improves SixSpeed regex-u.{es5,es6} largely since they stress String.prototype.match, which calls |
| this regExpMatchFast function. |
| |
| baseline patched |
| |
| regex-u.es5 55.3835+-6.3002 ^ 36.2431+-2.0797 ^ definitely 1.5281x faster |
| regex-u.es6 110.4624+-6.2896 ^ 94.1012+-7.2433 ^ definitely 1.1739x faster |
| |
| * builtins/RegExpPrototype.js: |
| (globalPrivate.matchSlow): |
| (overriddenName.string_appeared_here.match): |
| * dfg/DFGAbstractInterpreterInlines.h: |
| (JSC::DFG::AbstractInterpreter<AbstractStateType>::executeEffects): |
| * dfg/DFGByteCodeParser.cpp: |
| (JSC::DFG::ByteCodeParser::handleIntrinsicCall): |
| * dfg/DFGClobberize.h: |
| (JSC::DFG::clobberize): |
| * dfg/DFGDoesGC.cpp: |
| (JSC::DFG::doesGC): |
| * dfg/DFGFixupPhase.cpp: |
| (JSC::DFG::FixupPhase::fixupNode): |
| * dfg/DFGNode.h: |
| (JSC::DFG::Node::hasHeapPrediction): |
| * dfg/DFGNodeType.h: |
| * dfg/DFGOperations.cpp: |
| * dfg/DFGOperations.h: |
| * dfg/DFGPredictionPropagationPhase.cpp: |
| * dfg/DFGSafeToExecute.h: |
| (JSC::DFG::safeToExecute): |
| * dfg/DFGSpeculativeJIT.cpp: |
| (JSC::DFG::SpeculativeJIT::compileRegExpMatch): |
| * dfg/DFGSpeculativeJIT.h: |
| * dfg/DFGSpeculativeJIT32_64.cpp: |
| (JSC::DFG::SpeculativeJIT::compile): |
| * dfg/DFGSpeculativeJIT64.cpp: |
| (JSC::DFG::SpeculativeJIT::compile): |
| * ftl/FTLCapabilities.cpp: |
| (JSC::FTL::canCompile): |
| * ftl/FTLLowerDFGToB3.cpp: |
| (JSC::FTL::DFG::LowerDFGToB3::compileNode): |
| (JSC::FTL::DFG::LowerDFGToB3::compileRegExpMatch): |
| * runtime/Intrinsic.cpp: |
| (JSC::intrinsicName): |
| * runtime/Intrinsic.h: |
| * runtime/JSGlobalObject.cpp: |
| (JSC::JSGlobalObject::init): |
| * runtime/RegExpPrototype.cpp: |
| (JSC::regExpProtoFuncMatchFast): |
| |
| 2018-01-11 Saam Barati <sbarati@apple.com> |
| |
| Our for-in caching is wrong when we add indexed properties on things in the prototype chain |
| https://bugs.webkit.org/show_bug.cgi?id=181508 |
| |
| Reviewed by Yusuke Suzuki. |
| |
| Our for-in caching would cache structure chains that had prototypes with |
| indexed properties. Clearly this is wrong. This caching breaks when a prototype |
| adds new indexed properties. We would continue to enumerate the old cached |
| state of properties, and not include the new indexed properties. |
| |
| The old code used to prevent caching only if the base structure had |
| indexed properties. This patch extends it to prevent caching if the |
| base, or any structure in the prototype chain, has indexed properties. |
| |
| * runtime/Structure.cpp: |
| (JSC::Structure::canCachePropertyNameEnumerator const): |
| |
| 2018-01-10 JF Bastien <jfbastien@apple.com> |
| |
| Poison small JSObject derivatives which only contain pointers |
| https://bugs.webkit.org/show_bug.cgi?id=181483 |
| <rdar://problem/36407127> |
| |
| Reviewed by Mark Lam. |
| |
| I wrote a script that finds interesting things to poison or |
| generally harden. These stood out because they derive from |
| JSObject and only contain a few pointer or pointer-like fields, |
| and could therefore just be poisoned. This also requires some |
| template "improvements" to our poisoning machinery. Worth noting |
| is that I'm making PoisonedUniquePtr move-assignable and |
| move-constructible from unique_ptr, which makes it a better |
| drop-in replacement because we don't need to use |
| makePoisonedUniquePtr. This means function-locals can be |
| unique_ptr and get the nice RAII pattern, and once the function is |
| done you can just move to the class' PoisonedUniquePtr without |
| worrying. |
| |
| * API/JSAPIWrapperObject.h: |
| (JSC::JSAPIWrapperObject::wrappedObject): |
| * API/JSAPIWrapperObject.mm: |
| (JSC::JSAPIWrapperObject::JSAPIWrapperObject): |
| * API/JSCallbackObject.h: |
| * runtime/ArrayPrototype.h: |
| * runtime/DateInstance.h: |
| * runtime/JSArrayBuffer.cpp: |
| (JSC::JSArrayBuffer::finishCreation): |
| (JSC::JSArrayBuffer::isShared const): |
| (JSC::JSArrayBuffer::sharingMode const): |
| * runtime/JSArrayBuffer.h: |
| * runtime/JSCPoison.h: |
| |
| 2018-01-10 Commit Queue <commit-queue@webkit.org> |
| |
| Unreviewed, rolling out r226667 and r226673. |
| https://bugs.webkit.org/show_bug.cgi?id=181488 |
| |
| This caused a flaky crash. (Requested by mlewis13 on #webkit). |
| |
| Reverted changesets: |
| |
| "CodeBlocks should be in IsoSubspaces" |
| https://bugs.webkit.org/show_bug.cgi?id=180884 |
| https://trac.webkit.org/changeset/226667 |
| |
| "REGRESSION (r226667): CodeBlocks should be in IsoSubspaces" |
| https://bugs.webkit.org/show_bug.cgi?id=180884 |
| https://trac.webkit.org/changeset/226673 |
| |
| 2018-01-09 David Kilzer <ddkilzer@apple.com> |
| |
| REGRESSION (r226667): CodeBlocks should be in IsoSubspaces |
| <https://bugs.webkit.org/show_bug.cgi?id=180884> |
| |
| Fixes the following build error: |
| |
| heap/Heap.cpp:2708:10: error: lambda capture 'this' is not used [-Werror,-Wunused-lambda-capture] |
| |
| * heap/Heap.cpp: |
| (JSC::Heap::addCoreConstraints): Remove 'this' from lambda to |
| fix the build. |
| |
| 2018-01-09 Keith Miller <keith_miller@apple.com> |
| |
| and32 with an Address source on ARM64 did not invalidate dataTempRegister |
| https://bugs.webkit.org/show_bug.cgi?id=181467 |
| |
| Reviewed by Michael Saboff. |
| |
| * assembler/MacroAssemblerARM64.h: |
| (JSC::MacroAssemblerARM64::and32): |
| |
| 2018-01-04 Filip Pizlo <fpizlo@apple.com> |
| |
| CodeBlocks should be in IsoSubspaces |
| https://bugs.webkit.org/show_bug.cgi?id=180884 |
| |
| Reviewed by Saam Barati. |
| |
| This moves CodeBlocks into IsoSubspaces. Doing so means that we no longer need to have the |
| special CodeBlockSet HashSets of new and old CodeBlocks. We also no longer use |
| WeakReferenceHarvester or UnconditionalFinalizer. Instead: |
| |
| - Code block sweeping is now just eager sweeping. This means that it automatically takes |
| advantage of our unswept set, which roughly corresponds to what CodeBlockSet used to use |
| its eden set for. |
| |
| - Those idea of Executable "weakly visiting" the CodeBlock is replaced by Executable |
| marking a ExecutableToCodeBlockEdge object. That object being marked corresponds to what |
| we used to call CodeBlock "having been weakly visited". This means that CodeBlockSet no |
| longer has to clear the set of weakly visited code blocks. This also means that |
| determining CodeBlock liveness, propagating CodeBlock transitions, and jettisoning |
| CodeBlocks during GC are now the edge's job. The edge is also in an IsoSubspace and it |
| has IsoCellSets to tell us which edges have output constraints (what we used to call |
| CodeBlock's weak reference harvester) and which have unconditional finalizers. |
| |
| - CodeBlock now uses an IsoCellSet to tell if it has an unconditional finalizer. |
| |
| - CodeBlockSet still exists! It has one unified HashSet of CodeBlocks that we use to |
| handle requests from the sampler, debugger, and other facilities. They may want to ask |
| if some pointer corresponds to a CodeBlock during stages of execution during which the |
| GC is unable to answer isLive() queries. The trickiest is the sampling profiler thread. |
| There is no way that the GC's isLive could tell us of a CodeBlock that had already been |
| allocated has now been full constructed. |
| |
| * JavaScriptCore.xcodeproj/project.pbxproj: |
| * Sources.txt: |
| * bytecode/CodeBlock.cpp: |
| (JSC::CodeBlock::CodeBlock): |
| (JSC::CodeBlock::finishCreation): |
| (JSC::CodeBlock::finishCreationCommon): |
| (JSC::CodeBlock::~CodeBlock): |
| (JSC::CodeBlock::visitChildren): |
| (JSC::CodeBlock::propagateTransitions): |
| (JSC::CodeBlock::determineLiveness): |
| (JSC::CodeBlock::finalizeUnconditionally): |
| (JSC::CodeBlock::stronglyVisitStrongReferences): |
| (JSC::CodeBlock::hasInstalledVMTrapBreakpoints const): |
| (JSC::CodeBlock::installVMTrapBreakpoints): |
| (JSC::CodeBlock::dumpMathICStats): |
| (JSC::CodeBlock::visitWeakly): Deleted. |
| (JSC::CodeBlock::WeakReferenceHarvester::visitWeakReferences): Deleted. |
| (JSC::CodeBlock::UnconditionalFinalizer::finalizeUnconditionally): Deleted. |
| * bytecode/CodeBlock.h: |
| (JSC::CodeBlock::subspaceFor): |
| (JSC::CodeBlock::ownerEdge const): |
| (JSC::CodeBlock::clearVisitWeaklyHasBeenCalled): Deleted. |
| * bytecode/EvalCodeBlock.h: |
| (JSC::EvalCodeBlock::create): Deleted. |
| (JSC::EvalCodeBlock::createStructure): Deleted. |
| (JSC::EvalCodeBlock::variable): Deleted. |
| (JSC::EvalCodeBlock::numVariables): Deleted. |
| (JSC::EvalCodeBlock::functionHoistingCandidate): Deleted. |
| (JSC::EvalCodeBlock::numFunctionHoistingCandidates): Deleted. |
| (JSC::EvalCodeBlock::EvalCodeBlock): Deleted. |
| (JSC::EvalCodeBlock::unlinkedEvalCodeBlock const): Deleted. |
| * bytecode/ExecutableToCodeBlockEdge.cpp: Added. |
| (JSC::ExecutableToCodeBlockEdge::createStructure): |
| (JSC::ExecutableToCodeBlockEdge::create): |
| (JSC::ExecutableToCodeBlockEdge::visitChildren): |
| (JSC::ExecutableToCodeBlockEdge::visitOutputConstraints): |
| (JSC::ExecutableToCodeBlockEdge::finalizeUnconditionally): |
| (JSC::ExecutableToCodeBlockEdge::activate): |
| (JSC::ExecutableToCodeBlockEdge::deactivate): |
| (JSC::ExecutableToCodeBlockEdge::deactivateAndUnwrap): |
| (JSC::ExecutableToCodeBlockEdge::wrap): |
| (JSC::ExecutableToCodeBlockEdge::wrapAndActivate): |
| (JSC::ExecutableToCodeBlockEdge::ExecutableToCodeBlockEdge): |
| (JSC::ExecutableToCodeBlockEdge::runConstraint): |
| * bytecode/ExecutableToCodeBlockEdge.h: Added. |
| (JSC::ExecutableToCodeBlockEdge::subspaceFor): |
| (JSC::ExecutableToCodeBlockEdge::codeBlock const): |
| (JSC::ExecutableToCodeBlockEdge::unwrap): |
| * bytecode/FunctionCodeBlock.h: |
| (JSC::FunctionCodeBlock::subspaceFor): |
| (JSC::FunctionCodeBlock::createStructure): |
| * bytecode/ModuleProgramCodeBlock.h: |
| (JSC::ModuleProgramCodeBlock::create): Deleted. |
| (JSC::ModuleProgramCodeBlock::createStructure): Deleted. |
| (JSC::ModuleProgramCodeBlock::ModuleProgramCodeBlock): Deleted. |
| * bytecode/ProgramCodeBlock.h: |
| (JSC::ProgramCodeBlock::create): Deleted. |
| (JSC::ProgramCodeBlock::createStructure): Deleted. |
| (JSC::ProgramCodeBlock::ProgramCodeBlock): Deleted. |
| * debugger/Debugger.cpp: |
| (JSC::Debugger::SetSteppingModeFunctor::operator() const): |
| (JSC::Debugger::ToggleBreakpointFunctor::operator() const): |
| (JSC::Debugger::ClearCodeBlockDebuggerRequestsFunctor::operator() const): |
| (JSC::Debugger::ClearDebuggerRequestsFunctor::operator() const): |
| * heap/CodeBlockSet.cpp: |
| (JSC::CodeBlockSet::contains): |
| (JSC::CodeBlockSet::dump const): |
| (JSC::CodeBlockSet::add): |
| (JSC::CodeBlockSet::remove): |
| (JSC::CodeBlockSet::promoteYoungCodeBlocks): Deleted. |
| (JSC::CodeBlockSet::clearMarksForFullCollection): Deleted. |
| (JSC::CodeBlockSet::lastChanceToFinalize): Deleted. |
| (JSC::CodeBlockSet::deleteUnmarkedAndUnreferenced): Deleted. |
| * heap/CodeBlockSet.h: |
| * heap/CodeBlockSetInlines.h: |
| (JSC::CodeBlockSet::iterate): |
| (JSC::CodeBlockSet::iterateViaSubspaces): |
| * heap/ConservativeRoots.cpp: |
| (JSC::ConservativeRoots::genericAddPointer): |
| (JSC::DummyMarkHook::markKnownJSCell): |
| (JSC::CompositeMarkHook::mark): |
| (JSC::CompositeMarkHook::markKnownJSCell): |
| * heap/ConservativeRoots.h: |
| * heap/Heap.cpp: |
| (JSC::Heap::lastChanceToFinalize): |
| (JSC::Heap::finalizeMarkedUnconditionalFinalizers): |
| (JSC::Heap::finalizeUnconditionalFinalizers): |
| (JSC::Heap::beginMarking): |
| (JSC::Heap::deleteUnmarkedCompiledCode): |
| (JSC::Heap::sweepInFinalize): |
| (JSC::Heap::forEachCodeBlockImpl): |
| (JSC::Heap::forEachCodeBlockIgnoringJITPlansImpl): |
| (JSC::Heap::addCoreConstraints): |
| (JSC::Heap::finalizeUnconditionalFinalizersInIsoSubspace): Deleted. |
| * heap/Heap.h: |
| * heap/HeapCell.h: |
| * heap/HeapCellInlines.h: |
| (JSC::HeapCell::subspace const): |
| * heap/HeapInlines.h: |
| (JSC::Heap::forEachCodeBlock): |
| (JSC::Heap::forEachCodeBlockIgnoringJITPlans): |
| * heap/HeapUtil.h: |
| (JSC::HeapUtil::findGCObjectPointersForMarking): |
| * heap/IsoCellSet.cpp: |
| (JSC::IsoCellSet::parallelNotEmptyMarkedBlockSource): |
| * heap/IsoCellSet.h: |
| * heap/IsoCellSetInlines.h: |
| (JSC::IsoCellSet::forEachMarkedCellInParallel): |
| (JSC::IsoCellSet::forEachLiveCell): |
| * heap/LargeAllocation.h: |
| (JSC::LargeAllocation::subspace const): |
| * heap/MarkStackMergingConstraint.cpp: |
| (JSC::MarkStackMergingConstraint::executeImpl): |
| * heap/MarkStackMergingConstraint.h: |
| * heap/MarkedAllocator.cpp: |
| (JSC::MarkedAllocator::parallelNotEmptyBlockSource): |
| * heap/MarkedBlock.cpp: |
| (JSC::MarkedBlock::Handle::didAddToAllocator): |
| (JSC::MarkedBlock::Handle::didRemoveFromAllocator): |
| * heap/MarkedBlock.h: |
| (JSC::MarkedBlock::subspace const): |
| * heap/MarkedBlockInlines.h: |
| (JSC::MarkedBlock::Handle::forEachLiveCell): |
| * heap/MarkedSpaceInlines.h: |
| (JSC::MarkedSpace::forEachLiveCell): |
| * heap/MarkingConstraint.cpp: |
| (JSC::MarkingConstraint::execute): |
| (JSC::MarkingConstraint::doParallelWork): |
| (JSC::MarkingConstraint::finishParallelWork): Deleted. |
| (JSC::MarkingConstraint::doParallelWorkImpl): Deleted. |
| (JSC::MarkingConstraint::finishParallelWorkImpl): Deleted. |
| * heap/MarkingConstraint.h: |
| * heap/MarkingConstraintSet.cpp: |
| (JSC::MarkingConstraintSet::add): |
| * heap/MarkingConstraintSet.h: |
| (JSC::MarkingConstraintSet::add): |
| * heap/MarkingConstraintSolver.cpp: |
| (JSC::MarkingConstraintSolver::execute): |
| (JSC::MarkingConstraintSolver::addParallelTask): |
| (JSC::MarkingConstraintSolver::runExecutionThread): |
| (JSC::MarkingConstraintSolver::didExecute): Deleted. |
| * heap/MarkingConstraintSolver.h: |
| (JSC::MarkingConstraintSolver::TaskWithConstraint::TaskWithConstraint): |
| (JSC::MarkingConstraintSolver::TaskWithConstraint::operator== const): |
| * heap/SimpleMarkingConstraint.cpp: |
| (JSC::SimpleMarkingConstraint::SimpleMarkingConstraint): |
| (JSC::SimpleMarkingConstraint::executeImpl): |
| * heap/SimpleMarkingConstraint.h: |
| (JSC::SimpleMarkingConstraint::SimpleMarkingConstraint): |
| * heap/SlotVisitor.cpp: |
| (JSC::SlotVisitor::addParallelConstraintTask): |
| * heap/SlotVisitor.h: |
| * heap/Subspace.cpp: |
| (JSC::Subspace::sweep): |
| * heap/Subspace.h: |
| * heap/SubspaceInlines.h: |
| (JSC::Subspace::forEachLiveCell): |
| * llint/LowLevelInterpreter.asm: |
| * runtime/EvalExecutable.cpp: |
| (JSC::EvalExecutable::visitChildren): |
| * runtime/EvalExecutable.h: |
| (JSC::EvalExecutable::codeBlock): |
| * runtime/FunctionExecutable.cpp: |
| (JSC::FunctionExecutable::baselineCodeBlockFor): |
| (JSC::FunctionExecutable::visitChildren): |
| * runtime/FunctionExecutable.h: |
| * runtime/JSType.h: |
| * runtime/ModuleProgramExecutable.cpp: |
| (JSC::ModuleProgramExecutable::visitChildren): |
| * runtime/ModuleProgramExecutable.h: |
| * runtime/ProgramExecutable.cpp: |
| (JSC::ProgramExecutable::visitChildren): |
| * runtime/ProgramExecutable.h: |
| * runtime/ScriptExecutable.cpp: |
| (JSC::ScriptExecutable::installCode): |
| (JSC::ScriptExecutable::newReplacementCodeBlockFor): |
| * runtime/VM.cpp: |
| (JSC::VM::VM): |
| * runtime/VM.h: |
| (JSC::VM::SpaceAndFinalizerSet::SpaceAndFinalizerSet): |
| (JSC::VM::SpaceAndFinalizerSet::finalizerSetFor): |
| (JSC::VM::forEachCodeBlockSpace): |
| * runtime/VMTraps.cpp: |
| (JSC::VMTraps::handleTraps): |
| * tools/VMInspector.cpp: |
| (JSC::VMInspector::codeBlockForMachinePC): |
| (JSC::VMInspector::isValidCodeBlock): |
| |
| 2018-01-09 Michael Saboff <msaboff@apple.com> |
| |
| Unreviewed, rolling out r226600 and r226603 |
| https://bugs.webkit.org/show_bug.cgi?id=181351 |
| |
| Add a DOM gadget for Spectre testing |
| |
| * runtime/Options.h: |
| |
| 2018-01-09 Saam Barati <sbarati@apple.com> |
| |
| Reduce graph size by replacing terminal nodes in blocks that have a ForceOSRExit with Unreachable |
| https://bugs.webkit.org/show_bug.cgi?id=181409 |
| |
| Reviewed by Keith Miller. |
| |
| When I was looking at profiler data for Speedometer, I noticed that one of |
| the hottest functions in Speedometer is around 1100 bytecode operations long. |
| Only about 100 of those bytecode ops ever execute. However, we ended up |
| spending a lot of time compiling basic blocks that never executed. We often |
| plant ForceOSRExit nodes when we parse bytecodes that have a null value profile. |
| This is the case when such a node never executes. |
| |
| This patch makes it so that anytime a block has a ForceOSRExit, we replace its |
| terminal node with an Unreachable node (and remove all nodes after the |
| ForceOSRExit). This will cut down on graph size when such a block dominates |
| other blocks in the CFG. This allows us to get rid of huge chunks of the CFG |
| in certain programs. When doing this transformation, we also insert |
| Flushes/PhantomLocals to ensure we can recover values that are bytecode |
| live-in to the ForceOSRExit. |
| |
| Using ForceOSRExit as the signal for this is a bit of a hack. It definitely |
| does not get rid of all the CFG that it could. If we decide it's worth |
| it, we could use additional inputs into this mechanism. For example, we could |
| profile if a basic block ever executes inside the LLInt/Baseline, and |
| remove parts of the CFG based on that. |
| |
| When running Speedometer with the concurrent JIT turned off, this patch |
| improves DFG/FTL compile times by around 5%. |
| |
| * dfg/DFGByteCodeParser.cpp: |
| (JSC::DFG::ByteCodeParser::addToGraph): |
| (JSC::DFG::ByteCodeParser::parse): |
| |
| 2018-01-09 Mark Lam <mark.lam@apple.com> |
| |
| ASSERTION FAILED: pair.second->m_type & PropertyNode::Getter |
| https://bugs.webkit.org/show_bug.cgi?id=181388 |
| <rdar://problem/36349351> |
| |
| Reviewed by Saam Barati. |
| |
| When there are duplicate setters or getters, we may end up overwriting a getter |
| with a setter, or vice versa. This patch adds tracking for getters/setters that |
| have been overwritten with duplicates and ignore them. |
| |
| * bytecompiler/NodesCodegen.cpp: |
| (JSC::PropertyListNode::emitBytecode): |
| * parser/NodeConstructors.h: |
| (JSC::PropertyNode::PropertyNode): |
| * parser/Nodes.h: |
| (JSC::PropertyNode::isOverriddenByDuplicate const): |
| (JSC::PropertyNode::setIsOverriddenByDuplicate): |
| |
| 2018-01-08 Zan Dobersek <zdobersek@igalia.com> |
| |
| REGRESSION(r225913): about 30 JSC test failures on ARMv7 |
| https://bugs.webkit.org/show_bug.cgi?id=181162 |
| <rdar://problem/36261349> |
| |
| Unreviewed follow-up to r226298. Enable the fast case in |
| DFG::SpeculativeJIT::compileArraySlice() for any 64-bit platform, |
| assuming in good faith that enough GP registers are available on any |
| such configuration. The accompanying comment is adjusted to describe |
| this assumption. |
| |
| * dfg/DFGSpeculativeJIT.cpp: |
| (JSC::DFG::SpeculativeJIT::compileArraySlice): |
| |
| 2018-01-08 JF Bastien <jfbastien@apple.com> |
| |
| WebAssembly: mask indexed accesses to Table |
| https://bugs.webkit.org/show_bug.cgi?id=181412 |
| <rdar://problem/36363236> |
| |
| Reviewed by Saam Barati. |
| |
| WebAssembly Table indexed accesses are user-controlled and |
| bounds-checked. Force allocations of Table data to be a |
| power-of-two, and explicitly mask accesses after bounds-check |
| branches. |
| |
| Rename misleading usage of "size" when "length" of a Table was |
| intended. |
| |
| Rename the Spectre option from "disable" to "enable". |
| |
| * dfg/DFGSpeculativeJIT.cpp: |
| (JSC::DFG::SpeculativeJIT::SpeculativeJIT): |
| * ftl/FTLLowerDFGToB3.cpp: |
| (JSC::FTL::DFG::LowerDFGToB3::LowerDFGToB3): |
| * jit/JIT.cpp: |
| (JSC::JIT::JIT): |
| * runtime/Options.h: |
| * wasm/WasmB3IRGenerator.cpp: |
| (JSC::Wasm::B3IRGenerator::emitCheckAndPreparePointer): |
| (JSC::Wasm::B3IRGenerator::addCallIndirect): |
| * wasm/WasmTable.cpp: |
| (JSC::Wasm::Table::allocatedLength): |
| (JSC::Wasm::Table::setLength): |
| (JSC::Wasm::Table::create): |
| (JSC::Wasm::Table::Table): |
| (JSC::Wasm::Table::grow): |
| (JSC::Wasm::Table::clearFunction): |
| (JSC::Wasm::Table::setFunction): |
| * wasm/WasmTable.h: |
| (JSC::Wasm::Table::length const): |
| (JSC::Wasm::Table::offsetOfLength): |
| (JSC::Wasm::Table::offsetOfMask): |
| (JSC::Wasm::Table::mask const): |
| (JSC::Wasm::Table::isValidLength): |
| * wasm/js/JSWebAssemblyInstance.cpp: |
| (JSC::JSWebAssemblyInstance::create): |
| * wasm/js/JSWebAssemblyTable.cpp: |
| (JSC::JSWebAssemblyTable::JSWebAssemblyTable): |
| (JSC::JSWebAssemblyTable::visitChildren): |
| (JSC::JSWebAssemblyTable::grow): |
| (JSC::JSWebAssemblyTable::getFunction): |
| (JSC::JSWebAssemblyTable::clearFunction): |
| (JSC::JSWebAssemblyTable::setFunction): |
| * wasm/js/JSWebAssemblyTable.h: |
| (JSC::JSWebAssemblyTable::isValidLength): |
| (JSC::JSWebAssemblyTable::length const): |
| (JSC::JSWebAssemblyTable::allocatedLength const): |
| * wasm/js/WebAssemblyModuleRecord.cpp: |
| (JSC::WebAssemblyModuleRecord::evaluate): |
| * wasm/js/WebAssemblyTablePrototype.cpp: |
| (JSC::webAssemblyTableProtoFuncLength): |
| (JSC::webAssemblyTableProtoFuncGrow): |
| (JSC::webAssemblyTableProtoFuncGet): |
| (JSC::webAssemblyTableProtoFuncSet): |
| |
| 2018-01-08 Michael Saboff <msaboff@apple.com> |
| |
| Add a DOM gadget for Spectre testing |
| https://bugs.webkit.org/show_bug.cgi?id=181351 |
| |
| Reviewed by Michael Saboff. |
| |
| Added a new JSC::Option named enableSpectreGadgets to enable any gadgets added to test |
| Spectre mitigations. |
| |
| * runtime/Options.h: |
| |
| 2018-01-08 Mark Lam <mark.lam@apple.com> |
| |
| Rename CodeBlock::m_vm to CodeBlock::m_poisonedVM. |
| https://bugs.webkit.org/show_bug.cgi?id=181403 |
| <rdar://problem/36359789> |
| |
| Rubber-stamped by JF Bastien. |
| |
| * bytecode/CodeBlock.cpp: |
| (JSC::CodeBlock::CodeBlock): |
| (JSC::CodeBlock::~CodeBlock): |
| (JSC::CodeBlock::setConstantRegisters): |
| (JSC::CodeBlock::propagateTransitions): |
| (JSC::CodeBlock::finalizeLLIntInlineCaches): |
| (JSC::CodeBlock::jettison): |
| (JSC::CodeBlock::predictedMachineCodeSize): |
| * bytecode/CodeBlock.h: |
| (JSC::CodeBlock::vm const): |
| (JSC::CodeBlock::addConstant): |
| (JSC::CodeBlock::heap const): |
| (JSC::CodeBlock::replaceConstant): |
| * llint/LowLevelInterpreter.asm: |
| * llint/LowLevelInterpreter32_64.asm: |
| * llint/LowLevelInterpreter64.asm: |
| |
| 2018-01-07 Mark Lam <mark.lam@apple.com> |
| |
| Apply poisoning to more pointers in JSC. |
| https://bugs.webkit.org/show_bug.cgi?id=181096 |
| <rdar://problem/36182970> |
| |
| Reviewed by JF Bastien. |
| |
| * assembler/MacroAssembler.h: |
| (JSC::MacroAssembler::xorPtr): |
| * assembler/MacroAssemblerARM64.h: |
| (JSC::MacroAssemblerARM64::xor64): |
| * assembler/MacroAssemblerX86_64.h: |
| (JSC::MacroAssemblerX86_64::xor64): |
| - Add xorPtr implementation. |
| |
| * bytecode/CodeBlock.cpp: |
| (JSC::CodeBlock::inferredName const): |
| (JSC::CodeBlock::CodeBlock): |
| (JSC::CodeBlock::finishCreation): |
| (JSC::CodeBlock::~CodeBlock): |
| (JSC::CodeBlock::setConstantRegisters): |
| (JSC::CodeBlock::visitWeakly): |
| (JSC::CodeBlock::visitChildren): |
| (JSC::CodeBlock::propagateTransitions): |
| (JSC::CodeBlock::WeakReferenceHarvester::visitWeakReferences): |
| (JSC::CodeBlock::finalizeLLIntInlineCaches): |
| (JSC::CodeBlock::finalizeBaselineJITInlineCaches): |
| (JSC::CodeBlock::UnconditionalFinalizer::finalizeUnconditionally): |
| (JSC::CodeBlock::jettison): |
| (JSC::CodeBlock::predictedMachineCodeSize): |
| (JSC::CodeBlock::findPC): |
| * bytecode/CodeBlock.h: |
| (JSC::CodeBlock::UnconditionalFinalizer::UnconditionalFinalizer): |
| (JSC::CodeBlock::WeakReferenceHarvester::WeakReferenceHarvester): |
| (JSC::CodeBlock::stubInfoBegin): |
| (JSC::CodeBlock::stubInfoEnd): |
| (JSC::CodeBlock::callLinkInfosBegin): |
| (JSC::CodeBlock::callLinkInfosEnd): |
| (JSC::CodeBlock::instructions): |
| (JSC::CodeBlock::instructions const): |
| (JSC::CodeBlock::vm const): |
| * dfg/DFGOSRExitCompilerCommon.h: |
| (JSC::DFG::adjustFrameAndStackInOSRExitCompilerThunk): |
| * jit/JIT.h: |
| * llint/LLIntOfflineAsmConfig.h: |
| * llint/LowLevelInterpreter.asm: |
| * llint/LowLevelInterpreter64.asm: |
| * parser/UnlinkedSourceCode.h: |
| * runtime/JSCPoison.h: |
| * runtime/JSGlobalObject.cpp: |
| (JSC::JSGlobalObject::init): |
| * runtime/JSGlobalObject.h: |
| * runtime/JSScriptFetchParameters.h: |
| * runtime/JSScriptFetcher.h: |
| * runtime/StructureTransitionTable.h: |
| * wasm/js/JSWebAssemblyCodeBlock.cpp: |
| (JSC::JSWebAssemblyCodeBlock::JSWebAssemblyCodeBlock): |
| (JSC::JSWebAssemblyCodeBlock::visitChildren): |
| (JSC::JSWebAssemblyCodeBlock::UnconditionalFinalizer::finalizeUnconditionally): |
| * wasm/js/JSWebAssemblyCodeBlock.h: |
| |
| 2018-01-06 Yusuke Suzuki <utatane.tea@gmail.com> |
| |
| Object.getOwnPropertyNames includes "arguments" and "caller" for bound functions |
| https://bugs.webkit.org/show_bug.cgi?id=181321 |
| |
| Reviewed by Saam Barati. |
| |
| According to ECMA262 16.2[1], functions created using the bind method must not have |
| "caller" and "arguments" own properties. |
| |
| [1]: https://tc39.github.io/ecma262/#sec-forbidden-extensions |
| |
| * runtime/JSBoundFunction.cpp: |
| (JSC::JSBoundFunction::finishCreation): |
| |
| 2018-01-05 JF Bastien <jfbastien@apple.com> |
| |
| WebAssembly: poison JS object's secrets |
| https://bugs.webkit.org/show_bug.cgi?id=181339 |
| <rdar://problem/36325001> |
| |
| Reviewed by Mark Lam. |
| |
| Separating WebAssembly's JS objects from their non-JS |
| implementation means that all interesting information lives |
| outside of the JS object itself. This patch poisons each JS |
| object's pointer to non-JS implementation using the poisoning |
| mechanism and a unique key per JS object type origin. |
| |
| * runtime/JSCPoison.h: |
| * wasm/js/JSToWasm.cpp: |
| (JSC::Wasm::createJSToWasmWrapper): JS -> wasm stores the JS |
| object in a stack slot when fast TLS is disabled. This requires |
| that we unpoison the Wasm::Instance. |
| * wasm/js/JSWebAssemblyCodeBlock.h: |
| * wasm/js/JSWebAssemblyInstance.h: |
| (JSC::JSWebAssemblyInstance::offsetOfPoisonedInstance): renamed to |
| be explicit that the pointer is poisoned. |
| * wasm/js/JSWebAssemblyMemory.h: |
| * wasm/js/JSWebAssemblyModule.h: |
| * wasm/js/JSWebAssemblyTable.h: |
| |
| 2018-01-05 Michael Saboff <msaboff@apple.com> |
| |
| Add ability to disable indexed property masking for testing |
| https://bugs.webkit.org/show_bug.cgi?id=181350 |
| |
| Reviewed by Keith Miller. |
| |
| Made the masking of indexed properties runtime controllable via a new JSC::Option |
| named disableSpectreMitigations. This is done to test the efficacy of that mitigation. |
| |
| The new option has a generic name as it will probably be used to disable future mitigations. |
| |
| * dfg/DFGSpeculativeJIT.cpp: |
| (JSC::DFG::SpeculativeJIT::SpeculativeJIT): |
| (JSC::DFG::SpeculativeJIT::loadFromIntTypedArray): |
| (JSC::DFG::SpeculativeJIT::compileGetByValOnFloatTypedArray): |
| * dfg/DFGSpeculativeJIT.h: |
| * dfg/DFGSpeculativeJIT64.cpp: |
| (JSC::DFG::SpeculativeJIT::compile): |
| * ftl/FTLLowerDFGToB3.cpp: |
| (JSC::FTL::DFG::LowerDFGToB3::LowerDFGToB3): |
| (JSC::FTL::DFG::LowerDFGToB3::maskedIndex): |
| (JSC::FTL::DFG::LowerDFGToB3::pointerIntoTypedArray): |
| * jit/JIT.cpp: |
| (JSC::JIT::JIT): |
| * jit/JIT.h: |
| * jit/JITPropertyAccess.cpp: |
| (JSC::JIT::emitDoubleLoad): |
| (JSC::JIT::emitContiguousLoad): |
| (JSC::JIT::emitArrayStorageLoad): |
| * runtime/Options.h: |
| * wasm/WasmB3IRGenerator.cpp: |
| (JSC::Wasm::B3IRGenerator::emitCheckAndPreparePointer): |
| |
| 2018-01-05 Michael Saboff <msaboff@apple.com> |
| |
| Allow JSC Config Files to set Restricted Options |
| https://bugs.webkit.org/show_bug.cgi?id=181352 |
| |
| Reviewed by Mark Lam. |
| |
| * runtime/ConfigFile.cpp: |
| (JSC::ConfigFile::parse): |
| |
| 2018-01-04 Keith Miller <keith_miller@apple.com> |
| |
| TypedArrays and Wasm should use index masking. |
| https://bugs.webkit.org/show_bug.cgi?id=181313 |
| |
| Reviewed by Michael Saboff. |
| |
| We should have index masking for our TypedArray code in the |
| DFG/FTL and for Wasm when doing bounds checking. Index masking for |
| Wasm is added to the WasmBoundsCheckValue. Since we don't CSE any |
| WasmBoundsCheckValues we don't need to worry about combining a |
| bounds check for a load and a store. I went with fusing the |
| pointer masking in the WasmBoundsCheckValue since it should reduce |
| additional compiler overhead. |
| |
| * b3/B3LowerToAir.cpp: |
| * b3/B3Validate.cpp: |
| * b3/B3WasmBoundsCheckValue.cpp: |
| (JSC::B3::WasmBoundsCheckValue::WasmBoundsCheckValue): |
| (JSC::B3::WasmBoundsCheckValue::dumpMeta const): |
| * b3/B3WasmBoundsCheckValue.h: |
| (JSC::B3::WasmBoundsCheckValue::pinnedIndexingMask const): |
| * b3/air/AirCustom.h: |
| (JSC::B3::Air::WasmBoundsCheckCustom::generate): |
| * b3/testb3.cpp: |
| (JSC::B3::testWasmBoundsCheck): |
| * dfg/DFGSpeculativeJIT.cpp: |
| (JSC::DFG::SpeculativeJIT::emitAllocateRawObject): |
| (JSC::DFG::SpeculativeJIT::loadFromIntTypedArray): |
| (JSC::DFG::SpeculativeJIT::compileGetByValOnIntTypedArray): |
| (JSC::DFG::SpeculativeJIT::compileGetByValOnFloatTypedArray): |
| (JSC::DFG::SpeculativeJIT::compileNewTypedArrayWithSize): |
| * dfg/DFGSpeculativeJIT.h: |
| * dfg/DFGSpeculativeJIT64.cpp: |
| (JSC::DFG::SpeculativeJIT::compile): |
| * ftl/FTLLowerDFGToB3.cpp: |
| (JSC::FTL::DFG::LowerDFGToB3::compileAtomicsReadModifyWrite): |
| (JSC::FTL::DFG::LowerDFGToB3::compileGetByVal): |
| (JSC::FTL::DFG::LowerDFGToB3::compileNewTypedArray): |
| (JSC::FTL::DFG::LowerDFGToB3::pointerIntoTypedArray): |
| * jit/JITPropertyAccess.cpp: |
| (JSC::JIT::emitIntTypedArrayGetByVal): |
| * runtime/Butterfly.h: |
| (JSC::Butterfly::computeIndexingMask const): |
| (JSC::Butterfly::computeIndexingMaskForVectorLength): Deleted. |
| * runtime/JSArrayBufferView.cpp: |
| (JSC::JSArrayBufferView::JSArrayBufferView): |
| * wasm/WasmB3IRGenerator.cpp: |
| (JSC::Wasm::B3IRGenerator::B3IRGenerator): |
| (JSC::Wasm::B3IRGenerator::restoreWebAssemblyGlobalState): |
| (JSC::Wasm::B3IRGenerator::emitCheckAndPreparePointer): |
| (JSC::Wasm::B3IRGenerator::load): |
| (JSC::Wasm::B3IRGenerator::store): |
| (JSC::Wasm::B3IRGenerator::addCallIndirect): |
| * wasm/WasmBinding.cpp: |
| (JSC::Wasm::wasmToWasm): |
| * wasm/WasmMemory.cpp: |
| (JSC::Wasm::Memory::Memory): |
| (JSC::Wasm::Memory::grow): |
| * wasm/WasmMemory.h: |
| (JSC::Wasm::Memory::offsetOfIndexingMask): |
| * wasm/WasmMemoryInformation.cpp: |
| (JSC::Wasm::PinnedRegisterInfo::get): |
| (JSC::Wasm::PinnedRegisterInfo::PinnedRegisterInfo): |
| * wasm/WasmMemoryInformation.h: |
| (JSC::Wasm::PinnedRegisterInfo::toSave const): |
| * wasm/js/JSToWasm.cpp: |
| (JSC::Wasm::createJSToWasmWrapper): |
| |
| 2018-01-05 Commit Queue <commit-queue@webkit.org> |
| |
| Unreviewed, rolling out r226434. |
| https://bugs.webkit.org/show_bug.cgi?id=181322 |
| |
| 32bit JSC failure in x86 (Requested by yusukesuzuki on |
| #webkit). |
| |
| Reverted changeset: |
| |
| "[DFG] Unify ToNumber implementation in 32bit and 64bit by |
| changing 32bit Int32Tag and LowestTag" |
| https://bugs.webkit.org/show_bug.cgi?id=181134 |
| https://trac.webkit.org/changeset/226434 |
| |
| 2018-01-04 Devin Rousso <webkit@devinrousso.com> |
| |
| Web Inspector: replace HTMLCanvasElement with CanvasRenderingContext for instrumentation logic |
| https://bugs.webkit.org/show_bug.cgi?id=180770 |
| |
| Reviewed by Joseph Pecoraro. |
| |
| * inspector/protocol/Canvas.json: |
| |
| 2018-01-04 Commit Queue <commit-queue@webkit.org> |
| |
| Unreviewed, rolling out r226405. |
| https://bugs.webkit.org/show_bug.cgi?id=181318 |
| |
| Speculative rollout due to Octane/SplayLatency,Octane/Splay |
| regressions (Requested by yusukesuzuki on #webkit). |
| |
| Reverted changeset: |
| |
| "[JSC] Create parallel SlotVisitors apriori" |
| https://bugs.webkit.org/show_bug.cgi?id=180907 |
| https://trac.webkit.org/changeset/226405 |
| |
| 2018-01-04 Saam Barati <sbarati@apple.com> |
| |
| Do value profiling in to_this |
| https://bugs.webkit.org/show_bug.cgi?id=181299 |
| |
| Reviewed by Filip Pizlo. |
| |
| This patch adds value profiling to to_this. We use the result of the value |
| profiling only for strict mode code when we don't predict that the input is |
| of a specific type. This helps when the input is SpecCellOther. Such cells |
| might implement a custom ToThis, which can produce an arbitrary result. Before |
| this patch, in prediction propagation, we were saying that a ToThis with a |
| SpecCellOther input also produced SpecCellOther. However, this is incorrect, |
| given that the input may implement ToThis that produces an arbitrary result. |
| This is seen inside Speedometer. This patch fixes an OSR exit loop in Speedometer. |
| |
| Interestingly, this patch only does value profiling on the slow path. The fast |
| path of to_this in the LLInt/baseline just perform a structure check. If it |
| passes, the result is the same as the input. Therefore, doing value profiling |
| from the fast path wouldn't actually produce new information for the ValueProfile. |
| |
| * bytecode/BytecodeDumper.cpp: |
| (JSC::BytecodeDumper<Block>::dumpBytecode): |
| * bytecode/BytecodeList.json: |
| * bytecode/CodeBlock.cpp: |
| (JSC::CodeBlock::finishCreation): |
| * bytecompiler/BytecodeGenerator.cpp: |
| (JSC::BytecodeGenerator::BytecodeGenerator): |
| (JSC::BytecodeGenerator::emitToThis): |
| * bytecompiler/BytecodeGenerator.h: |
| * dfg/DFGByteCodeParser.cpp: |
| (JSC::DFG::ByteCodeParser::parseBlock): |
| * dfg/DFGNode.h: |
| (JSC::DFG::Node::hasHeapPrediction): |
| * dfg/DFGPredictionPropagationPhase.cpp: |
| * runtime/CommonSlowPaths.cpp: |
| (JSC::SLOW_PATH_DECL): |
| |
| 2018-01-04 Yusuke Suzuki <utatane.tea@gmail.com> |
| |
| [DFG] Unify ToNumber implementation in 32bit and 64bit by changing 32bit Int32Tag and LowestTag |
| https://bugs.webkit.org/show_bug.cgi?id=181134 |
| |
| Reviewed by Mark Lam. |
| |
| We would like to unify DFG ToNumber implementation in 32bit and 64bit. One problem is that |
| branchIfNumber signature is different between 32bit and 64bit. 32bit implementation requires |
| an additional scratch register. We do not want to allocate an unnecessary register in 64bit |
| implementation. |
| |
| This patch removes the additional register in branchIfNumber/branchIfNotNumber in both 32bit |
| and 64bit implementation. To achieve this goal, we change Int32Tag and LowestTag order. By |
| setting Int32Tag as LowestTag, we can query whether the given tag is a number by checking |
| `<= LowestTag(Int32Tag)`. |
| |
| We also change the order of UndefinedTag, NullTag, and BooleanTag to keep `(UndefinedTag | 1) == NullTag`. |
| |
| We also clean up speculateMisc implementation by adding branchIfMisc/branchIfNotMisc. |
| |
| * dfg/DFGSpeculativeJIT.cpp: |
| (JSC::DFG::SpeculativeJIT::compileValueToInt32): |
| (JSC::DFG::SpeculativeJIT::compileDoubleRep): |
| (JSC::DFG::SpeculativeJIT::speculateNumber): |
| (JSC::DFG::SpeculativeJIT::speculateMisc): |
| (JSC::DFG::SpeculativeJIT::compileNormalizeMapKey): |
| (JSC::DFG::SpeculativeJIT::compileToNumber): |
| * dfg/DFGSpeculativeJIT.h: |
| * dfg/DFGSpeculativeJIT32_64.cpp: |
| (JSC::DFG::SpeculativeJIT::nonSpeculativeNonPeepholeCompareNullOrUndefined): |
| (JSC::DFG::SpeculativeJIT::nonSpeculativePeepholeBranchNullOrUndefined): |
| (JSC::DFG::SpeculativeJIT::compileObjectOrOtherLogicalNot): |
| (JSC::DFG::SpeculativeJIT::emitObjectOrOtherBranch): |
| (JSC::DFG::SpeculativeJIT::compile): |
| * dfg/DFGSpeculativeJIT64.cpp: |
| (JSC::DFG::SpeculativeJIT::compile): |
| * jit/AssemblyHelpers.cpp: |
| (JSC::AssemblyHelpers::branchIfNotType): |
| (JSC::AssemblyHelpers::jitAssertIsJSNumber): |
| (JSC::AssemblyHelpers::emitConvertValueToBoolean): |
| * jit/AssemblyHelpers.h: |
| (JSC::AssemblyHelpers::branchIfMisc): |
| (JSC::AssemblyHelpers::branchIfNotMisc): |
| (JSC::AssemblyHelpers::branchIfNumber): |
| (JSC::AssemblyHelpers::branchIfNotNumber): |
| (JSC::AssemblyHelpers::branchIfNotDoubleKnownNotInt32): |
| (JSC::AssemblyHelpers::emitTypeOf): |
| * jit/JITAddGenerator.cpp: |
| (JSC::JITAddGenerator::generateFastPath): |
| * jit/JITArithmetic32_64.cpp: |
| (JSC::JIT::emitBinaryDoubleOp): |
| * jit/JITDivGenerator.cpp: |
| (JSC::JITDivGenerator::loadOperand): |
| * jit/JITMulGenerator.cpp: |
| (JSC::JITMulGenerator::generateInline): |
| (JSC::JITMulGenerator::generateFastPath): |
| * jit/JITNegGenerator.cpp: |
| (JSC::JITNegGenerator::generateInline): |
| (JSC::JITNegGenerator::generateFastPath): |
| * jit/JITOpcodes32_64.cpp: |
| (JSC::JIT::emit_op_is_number): |
| (JSC::JIT::emit_op_jeq_null): |
| (JSC::JIT::emit_op_jneq_null): |
| (JSC::JIT::emit_op_to_number): |
| (JSC::JIT::emit_op_profile_type): |
| * jit/JITRightShiftGenerator.cpp: |
| (JSC::JITRightShiftGenerator::generateFastPath): |
| * jit/JITSubGenerator.cpp: |
| (JSC::JITSubGenerator::generateInline): |
| (JSC::JITSubGenerator::generateFastPath): |
| * llint/LLIntData.cpp: |
| (JSC::LLInt::Data::performAssertions): |
| * llint/LowLevelInterpreter.asm: |
| * llint/LowLevelInterpreter32_64.asm: |
| * runtime/JSCJSValue.h: |
| |
| 2018-01-04 JF Bastien <jfbastien@apple.com> |
| |
| Add assembler support for x86 lfence and sfence |
| https://bugs.webkit.org/show_bug.cgi?id=181311 |
| <rdar://problem/36301780> |
| |
| Reviewed by Michael Saboff. |
| |
| Useful for testing performance of serializing instructions (hint: |
| it's not good). |
| |
| * assembler/MacroAssemblerX86Common.h: |
| (JSC::MacroAssemblerX86Common::lfence): |
| (JSC::MacroAssemblerX86Common::sfence): |
| * assembler/X86Assembler.h: |
| (JSC::X86Assembler::lfence): |
| (JSC::X86Assembler::sfence): |
| |
| 2018-01-04 Saam Barati <sbarati@apple.com> |
| |
| Add a new pattern matching rule to Graph::methodOfGettingAValueProfileFor for SetLocal(@nodeWithHeapPrediction) |
| https://bugs.webkit.org/show_bug.cgi?id=181296 |
| |
| Reviewed by Filip Pizlo. |
| |
| Inside Speedometer's Ember test, there is a recompile loop like: |
| a: GetByVal(..., semanticOriginX) |
| b: SetLocal(Cell:@a, semanticOriginX) |
| |
| where the cell check always fails. For reasons I didn't investigate, the |
| baseline JIT's value profiling doesn't accurately capture the GetByVal's |
| result. |
| |
| However, when compiling this cell speculation check in the DFG, we get a null |
| MethodOfGettingAValueProfile inside Graph::methodOfGettingAValueProfileFor for |
| this IR pattern because both @a and @b have the same semantic origin. We |
| should not follow the same semantic origin heuristic when dealing with |
| SetLocal since SetLocal(@nodeWithHeapPrediction) is such a common IR pattern. |
| For patterns like this, we introduce a new heuristic: @NodeThatDoesNotProduceAValue(@nodeWithHeapPrediction). |
| For this IR pattern, we will update the value profile for the semantic origin |
| for @nodeWithHeapPrediction. So, for the Speedometer example above, we |
| will correctly update the GetByVal's value profile, which will prevent |
| an OSR exit loop. |
| |
| * dfg/DFGGraph.cpp: |
| (JSC::DFG::Graph::methodOfGettingAValueProfileFor): |
| |
| 2018-01-04 Keith Miller <keith_miller@apple.com> |
| |
| Array Storage operations sometimes did not update the indexing mask correctly. |
| https://bugs.webkit.org/show_bug.cgi?id=181301 |
| |
| Reviewed by Mark Lam. |
| |
| I will add tests in a follow up patch. See: https://bugs.webkit.org/show_bug.cgi?id=181303 |
| |
| * runtime/JSArray.cpp: |
| (JSC::JSArray::shiftCountWithArrayStorage): |
| * runtime/JSObject.cpp: |
| (JSC::JSObject::increaseVectorLength): |
| |
| 2018-01-04 Yusuke Suzuki <utatane.tea@gmail.com> |
| |
| [DFG] Define defs for MapSet/SetAdd to participate in CSE |
| https://bugs.webkit.org/show_bug.cgi?id=179911 |
| |
| Reviewed by Saam Barati. |
| |
| With this patch, our MapSet and SetAdd DFG nodes participate in CSE. |
| To handle a bit tricky DFG Map operation nodes, MapSet and SetAdd |
| produce added bucket as its result. Subsequent GetMapBucket will |
| be removed by CSE. |
| |
| * dfg/DFGAbstractInterpreterInlines.h: |
| (JSC::DFG::AbstractInterpreter<AbstractStateType>::executeEffects): |
| * dfg/DFGClobberize.h: |
| (JSC::DFG::clobberize): |
| * dfg/DFGNodeType.h: |
| * dfg/DFGOperations.cpp: |
| * dfg/DFGOperations.h: |
| * dfg/DFGPredictionPropagationPhase.cpp: |
| * dfg/DFGSpeculativeJIT.cpp: |
| (JSC::DFG::SpeculativeJIT::compileSetAdd): |
| (JSC::DFG::SpeculativeJIT::compileMapSet): |
| * dfg/DFGSpeculativeJIT.h: |
| (JSC::DFG::SpeculativeJIT::callOperation): |
| * ftl/FTLLowerDFGToB3.cpp: |
| (JSC::FTL::DFG::LowerDFGToB3::compileSetAdd): |
| (JSC::FTL::DFG::LowerDFGToB3::compileMapSet): |
| * jit/JITOperations.h: |
| * runtime/HashMapImpl.h: |
| (JSC::HashMapImpl::addNormalized): |
| (JSC::HashMapImpl::addNormalizedInternal): |
| |
| 2018-01-04 Yusuke Suzuki <utatane.tea@gmail.com> |
| |
| [JSC] Remove LocalScope |
| https://bugs.webkit.org/show_bug.cgi?id=181206 |
| |
| Reviewed by Geoffrey Garen. |
| |
| The last user of HandleStack and LocalScope is JSON. But MarkedArgumentBuffer is enough for their use. |
| This patch changes JSON parsing and stringifying to using MarkedArgumentBuffer. And remove HandleStack |
| and LocalScope. |
| |
| We make Stringifier and Walker WTF_FORBID_HEAP_ALLOCATION to place them on the stack. So they can hold |
| JSObject* directly in their fields. |
| |
| * JavaScriptCore.xcodeproj/project.pbxproj: |
| * Sources.txt: |
| * heap/HandleStack.cpp: Removed. |
| * heap/HandleStack.h: Removed. |
| * heap/Heap.cpp: |
| (JSC::Heap::addCoreConstraints): |
| * heap/Heap.h: |
| (JSC::Heap::handleSet): |
| (JSC::Heap::handleStack): Deleted. |
| * heap/Local.h: Removed. |
| * heap/LocalScope.h: Removed. |
| * runtime/JSONObject.cpp: |
| (JSC::Stringifier::Holder::object const): |
| (JSC::gap): |
| (JSC::Stringifier::Stringifier): |
| (JSC::Stringifier::stringify): |
| (JSC::Stringifier::appendStringifiedValue): |
| (JSC::Stringifier::Holder::Holder): |
| (JSC::Stringifier::Holder::appendNextProperty): |
| (JSC::Walker::Walker): |
| (JSC::Walker::callReviver): |
| (JSC::Walker::walk): |
| (JSC::JSONProtoFuncParse): |
| (JSC::JSONProtoFuncStringify): |
| (JSC::JSONParse): |
| (JSC::JSONStringify): |
| |
| 2018-01-04 Yusuke Suzuki <utatane.tea@gmail.com> |
| |
| [FTL] Optimize ObjectAllocationSinking mergePointerSets by using removeIf |
| https://bugs.webkit.org/show_bug.cgi?id=180238 |
| |
| Reviewed by Saam Barati. |
| |
| We can optimize ObjectAllocationSinking a bit by using removeIf. |
| |
| * dfg/DFGObjectAllocationSinkingPhase.cpp: |
| |
| 2018-01-04 Yusuke Suzuki <utatane.tea@gmail.com> |
| |
| [JSC] Create parallel SlotVisitors apriori |
| https://bugs.webkit.org/show_bug.cgi?id=180907 |
| |
| Reviewed by Saam Barati. |
| |
| The number of SlotVisitors are capped with the number of HeapHelperPool's threads + 2. |
| If we create these SlotVisitors apriori, we do not need to create SlotVisitors dynamically. |
| Then we do not need to grab locks while iterating all the SlotVisitors. |
| |
| In addition, we do not need to consider the case that the number of SlotVisitors increases |
| after setting up VisitCounters in MarkingConstraintSolver since the number of SlotVisitors |
| does not increase any more. |
| |
| * heap/Heap.cpp: |
| (JSC::Heap::Heap): |
| (JSC::Heap::runBeginPhase): |
| * heap/Heap.h: |
| * heap/HeapInlines.h: |
| (JSC::Heap::forEachSlotVisitor): |
| (JSC::Heap::numberOfSlotVisitors): Deleted. |
| * heap/MarkingConstraintSolver.cpp: |
| (JSC::MarkingConstraintSolver::didVisitSomething const): |
| |
| 2018-01-03 Ting-Wei Lan <lantw44@gmail.com> |
| |
| Replace hard-coded paths in shebangs with #!/usr/bin/env |
| https://bugs.webkit.org/show_bug.cgi?id=181040 |
| |
| Reviewed by Alex Christensen. |
| |
| * Scripts/UpdateContents.py: |
| * Scripts/cssmin.py: |
| * Scripts/generate-combined-inspector-json.py: |
| * Scripts/xxd.pl: |
| * create_hash_table: |
| * generate-bytecode-files: |
| * wasm/generateWasm.py: |
| * wasm/generateWasmOpsHeader.py: |
| * yarr/generateYarrCanonicalizeUnicode: |
| |
| 2018-01-03 Michael Saboff <msaboff@apple.com> |
| |
| Disable SharedArrayBuffers from Web API |
| https://bugs.webkit.org/show_bug.cgi?id=181266 |
| |
| Reviewed by Saam Barati. |
| |
| Removed SharedArrayBuffer prototype and structure from GlobalObject creation |
| to disable. |
| |
| * runtime/JSGlobalObject.cpp: |
| (JSC::JSGlobalObject::init): |
| (JSC::JSGlobalObject::visitChildren): |
| * runtime/JSGlobalObject.h: |
| (JSC::JSGlobalObject::arrayBufferPrototype const): |
| (JSC::JSGlobalObject::arrayBufferStructure const): |
| |
| 2018-01-03 Michael Saboff <msaboff@apple.com> |
| |
| Add "noInline" to $vm |
| https://bugs.webkit.org/show_bug.cgi?id=181265 |
| |
| Reviewed by Mark Lam. |
| |
| This would be useful for web based tests. |
| |
| * tools/JSDollarVM.cpp: |
| (JSC::getExecutableForFunction): |
| (JSC::functionNoInline): |
| (JSC::JSDollarVM::finishCreation): |
| |
| 2018-01-03 Michael Saboff <msaboff@apple.com> |
| |
| Remove unnecessary flushing of Butterfly pointer in functionCpuClflush() |
| https://bugs.webkit.org/show_bug.cgi?id=181263 |
| |
| Reviewed by Mark Lam. |
| |
| Flushing the butterfly pointer provides no benefit and slows this function. |
| |
| * tools/JSDollarVM.cpp: |
| (JSC::functionCpuClflush): |
| |
| 2018-01-03 Saam Barati <sbarati@apple.com> |
| |
| Fix BytecodeParser op_catch assert to work with useProfiler=1 |
| https://bugs.webkit.org/show_bug.cgi?id=181260 |
| |
| Reviewed by Keith Miller. |
| |
| op_catch was asserting that the current block was empty. This is only true |
| if the profiler isn't enabled. When the profiler is enabled, we will |
| insert a CountExecution node before each bytecode. This patch fixes the |
| assert to work with the profiler. |
| |
| * dfg/DFGByteCodeParser.cpp: |
| (JSC::DFG::ByteCodeParser::parseBlock): |
| |
| 2018-01-03 Per Arne Vollan <pvollan@apple.com> |
| |
| [Win][Debug] testapi link error. |
| https://bugs.webkit.org/show_bug.cgi?id=181247 |
| <rdar://problem/36166729> |
| |
| Reviewed by Brent Fulgham. |
| |
| Do not set the runtime library compile flag for C files, it is already set to the correct value. |
| |
| * shell/PlatformWin.cmake: |
| |
| 2018-01-03 Robin Morisset <rmorisset@apple.com> |
| |
| Inlining of a function that ends in op_unreachable crashes |
| https://bugs.webkit.org/show_bug.cgi?id=181027 |
| |
| Reviewed by Filip Pizlo. |
| |
| * dfg/DFGByteCodeParser.cpp: |
| (JSC::DFG::ByteCodeParser::allocateTargetableBlock): |
| (JSC::DFG::ByteCodeParser::inlineCall): |
| |
| 2018-01-02 Saam Barati <sbarati@apple.com> |
| |
| Incorrect assertion inside AccessCase |
| https://bugs.webkit.org/show_bug.cgi?id=181200 |
| <rdar://problem/35494754> |
| |
| Reviewed by Yusuke Suzuki. |
| |
| Consider a PutById compiled to a setter in a function like so: |
| |
| ``` |
| function foo(o) { o.f = o; } |
| ``` |
| |
| The DFG will often assign the same registers to the baseGPR (o in o.f) and the |
| valueRegsPayloadGPR (o in the RHS). The code totally works when these are assigned |
| to the same register. However, we're asserting that they're not the same register. |
| This patch just removes this invalid assertion. |
| |
| * bytecode/AccessCase.cpp: |
| (JSC::AccessCase::generateImpl): |
| |
| 2018-01-02 Caio Lima <ticaiolima@gmail.com> |
| |
| [ESNext][BigInt] Implement BigIntConstructor and BigIntPrototype |
| https://bugs.webkit.org/show_bug.cgi?id=175359 |
| |
| Reviewed by Yusuke Suzuki. |
| |
| This patch is implementing BigIntConstructor and BigIntPrototype |
| following spec[1, 2]. As addition, we are also implementing BigIntObject |
| warapper to handle ToObject(v) abstract operation when "v" is a BigInt |
| primitive. With these classes, now it's possible to syntetize |
| BigInt.prototype and then call "toString", "valueOf" and |
| "toLocaleString" when the primitive is a BigInt. |
| BigIntConstructor exposes an API to parse other primitives such as |
| Number, Boolean and String to BigInt. |
| We decided to skip parseInt implementation, since it was removed from |
| spec. |
| |
| [1] - https://tc39.github.io/proposal-bigint/#sec-bigint-constructor |
| [2] - https://tc39.github.io/proposal-bigint/#sec-properties-of-the-bigint-prototype-object |
| |
| * CMakeLists.txt: |
| * DerivedSources.make: |
| * JavaScriptCore.xcodeproj/project.pbxproj: |
| * Sources.txt: |
| * jsc.cpp: |
| * runtime/BigIntConstructor.cpp: Added. |
| (JSC::BigIntConstructor::BigIntConstructor): |
| (JSC::BigIntConstructor::finishCreation): |
| (JSC::isSafeInteger): |
| (JSC::toBigInt): |
| (JSC::callBigIntConstructor): |
| (JSC::bigIntConstructorFuncAsUintN): |
| (JSC::bigIntConstructorFuncAsIntN): |
| * runtime/BigIntConstructor.h: Added. |
| (JSC::BigIntConstructor::create): |
| (JSC::BigIntConstructor::createStructure): |
| * runtime/BigIntObject.cpp: Added. |
| (JSC::BigIntObject::BigIntObject): |
| (JSC::BigIntObject::finishCreation): |
| (JSC::BigIntObject::toStringName): |
| (JSC::BigIntObject::defaultValue): |
| * runtime/BigIntObject.h: Added. |
| (JSC::BigIntObject::create): |
| (JSC::BigIntObject::internalValue const): |
| (JSC::BigIntObject::createStructure): |
| * runtime/BigIntPrototype.cpp: Added. |
| (JSC::BigIntPrototype::BigIntPrototype): |
| (JSC::BigIntPrototype::finishCreation): |
| (JSC::toThisBigIntValue): |
| (JSC::bigIntProtoFuncToString): |
| (JSC::bigIntProtoFuncToLocaleString): |
| (JSC::bigIntProtoFuncValueOf): |
| * runtime/BigIntPrototype.h: Added. |
| (JSC::BigIntPrototype::create): |
| (JSC::BigIntPrototype::createStructure): |
| * runtime/IntlCollator.cpp: |
| (JSC::IntlCollator::initializeCollator): |
| * runtime/IntlNumberFormat.cpp: |
| (JSC::IntlNumberFormat::initializeNumberFormat): |
| * runtime/JSBigInt.cpp: |
| (JSC::JSBigInt::createFrom): |
| (JSC::JSBigInt::parseInt): |
| (JSC::JSBigInt::toObject const): |
| * runtime/JSBigInt.h: |
| * runtime/JSCJSValue.cpp: |
| (JSC::JSValue::synthesizePrototype const): |
| * runtime/JSCPoisonedPtr.cpp: |
| * runtime/JSCell.cpp: |
| (JSC::JSCell::toObjectSlow const): |
| * runtime/JSGlobalObject.cpp: |
| (JSC::JSGlobalObject::init): |
| (JSC::JSGlobalObject::visitChildren): |
| * runtime/JSGlobalObject.h: |
| (JSC::JSGlobalObject::bigIntPrototype const): |
| (JSC::JSGlobalObject::bigIntObjectStructure const): |
| * runtime/StructureCache.h: |
| * runtime/StructureInlines.h: |
| (JSC::prototypeForLookupPrimitiveImpl): |
| |
| 2018-01-02 Tim Horton <timothy_horton@apple.com> |
| |
| Fix the MathCommon build with a recent compiler |
| https://bugs.webkit.org/show_bug.cgi?id=181216 |
| |
| Reviewed by Sam Weinig. |
| |
| * runtime/MathCommon.cpp: |
| (JSC::fdlibmPow): |
| This cast drops the 'const' qualifier from the pointer to 'one', |
| but it doesn't have to, and it makes the compiler sad. |
| |
| == Rolled over to ChangeLog-2018-01-01 == |