| /* |
| * Copyright (C) 2013-2020 Apple Inc. All rights reserved. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions |
| * are met: |
| * 1. Redistributions of source code must retain the above copyright |
| * notice, this list of conditions and the following disclaimer. |
| * 2. Redistributions in binary form must reproduce the above copyright |
| * notice, this list of conditions and the following disclaimer in the |
| * documentation and/or other materials provided with the distribution. |
| * |
| * THIS SOFTWARE IS PROVIDED BY APPLE INC. ``AS IS'' AND ANY |
| * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE |
| * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR |
| * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL APPLE INC. OR |
| * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, |
| * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, |
| * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR |
| * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY |
| * OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT |
| * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE |
| * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| */ |
| |
| #include "config.h" |
| #include "DFGPlan.h" |
| |
| #if ENABLE(DFG_JIT) |
| |
| #include "DFGArgumentsEliminationPhase.h" |
| #include "DFGBackwardsPropagationPhase.h" |
| #include "DFGByteCodeParser.h" |
| #include "DFGCFAPhase.h" |
| #include "DFGCFGSimplificationPhase.h" |
| #include "DFGCPSRethreadingPhase.h" |
| #include "DFGCSEPhase.h" |
| #include "DFGCleanUpPhase.h" |
| #include "DFGConstantFoldingPhase.h" |
| #include "DFGConstantHoistingPhase.h" |
| #include "DFGCriticalEdgeBreakingPhase.h" |
| #include "DFGDCEPhase.h" |
| #include "DFGFailedFinalizer.h" |
| #include "DFGFixupPhase.h" |
| #include "DFGGraphSafepoint.h" |
| #include "DFGIntegerCheckCombiningPhase.h" |
| #include "DFGIntegerRangeOptimizationPhase.h" |
| #include "DFGInvalidationPointInjectionPhase.h" |
| #include "DFGJITCompiler.h" |
| #include "DFGLICMPhase.h" |
| #include "DFGLiveCatchVariablePreservationPhase.h" |
| #include "DFGLivenessAnalysisPhase.h" |
| #include "DFGLoopPreHeaderCreationPhase.h" |
| #include "DFGMovHintRemovalPhase.h" |
| #include "DFGOSRAvailabilityAnalysisPhase.h" |
| #include "DFGOSREntrypointCreationPhase.h" |
| #include "DFGObjectAllocationSinkingPhase.h" |
| #include "DFGPhantomInsertionPhase.h" |
| #include "DFGPredictionInjectionPhase.h" |
| #include "DFGPredictionPropagationPhase.h" |
| #include "DFGPutStackSinkingPhase.h" |
| #include "DFGSSAConversionPhase.h" |
| #include "DFGSSALoweringPhase.h" |
| #include "DFGStackLayoutPhase.h" |
| #include "DFGStaticExecutionCountEstimationPhase.h" |
| #include "DFGStoreBarrierClusteringPhase.h" |
| #include "DFGStoreBarrierInsertionPhase.h" |
| #include "DFGStrengthReductionPhase.h" |
| #include "DFGTierUpCheckInjectionPhase.h" |
| #include "DFGTypeCheckHoistingPhase.h" |
| #include "DFGUnificationPhase.h" |
| #include "DFGValidate.h" |
| #include "DFGValueRepReductionPhase.h" |
| #include "DFGVarargsForwardingPhase.h" |
| #include "DFGVirtualRegisterAllocationPhase.h" |
| #include "DFGWatchpointCollectionPhase.h" |
| #include "JSCInlines.h" |
| #include "OperandsInlines.h" |
| #include "ProfilerDatabase.h" |
| #include "TrackedReferences.h" |
| #include "VMInlines.h" |
| |
| #if ENABLE(FTL_JIT) |
| #include "FTLCapabilities.h" |
| #include "FTLCompile.h" |
| #include "FTLFail.h" |
| #include "FTLLink.h" |
| #include "FTLLowerDFGToB3.h" |
| #include "FTLState.h" |
| #endif |
| |
| namespace JSC { |
| |
| extern Seconds totalDFGCompileTime; |
| extern Seconds totalFTLCompileTime; |
| extern Seconds totalFTLDFGCompileTime; |
| extern Seconds totalFTLB3CompileTime; |
| |
| } |
| |
| namespace JSC { namespace DFG { |
| |
| namespace { |
| |
| void dumpAndVerifyGraph(Graph& graph, const char* text, bool forceDump = false) |
| { |
| GraphDumpMode modeForFinalValidate = DumpGraph; |
| if (verboseCompilationEnabled(graph.m_plan.mode()) || forceDump) { |
| dataLog(text, "\n"); |
| graph.dump(); |
| modeForFinalValidate = DontDumpGraph; |
| } |
| if (validationEnabled()) |
| validate(graph, modeForFinalValidate); |
| } |
| |
| Profiler::CompilationKind profilerCompilationKindForMode(CompilationMode mode) |
| { |
| switch (mode) { |
| case InvalidCompilationMode: |
| RELEASE_ASSERT_NOT_REACHED(); |
| return Profiler::DFG; |
| case DFGMode: |
| return Profiler::DFG; |
| case FTLMode: |
| return Profiler::FTL; |
| case FTLForOSREntryMode: |
| return Profiler::FTLForOSREntry; |
| } |
| RELEASE_ASSERT_NOT_REACHED(); |
| return Profiler::DFG; |
| } |
| |
| } // anonymous namespace |
| |
| Plan::Plan(CodeBlock* passedCodeBlock, CodeBlock* profiledDFGCodeBlock, |
| CompilationMode mode, BytecodeIndex osrEntryBytecodeIndex, |
| const Operands<Optional<JSValue>>& mustHandleValues) |
| : m_mode(mode) |
| , m_vm(&passedCodeBlock->vm()) |
| , m_codeBlock(passedCodeBlock) |
| , m_profiledDFGCodeBlock(profiledDFGCodeBlock) |
| , m_mustHandleValues(mustHandleValues) |
| , m_osrEntryBytecodeIndex(osrEntryBytecodeIndex) |
| , m_compilation(UNLIKELY(m_vm->m_perBytecodeProfiler) ? adoptRef(new Profiler::Compilation(m_vm->m_perBytecodeProfiler->ensureBytecodesFor(m_codeBlock), profilerCompilationKindForMode(mode))) : nullptr) |
| , m_inlineCallFrames(adoptRef(new InlineCallFrameSet())) |
| , m_identifiers(m_codeBlock) |
| , m_weakReferences(m_codeBlock) |
| , m_stage(Preparing) |
| { |
| RELEASE_ASSERT(m_codeBlock->alternative()->jitCode()); |
| m_inlineCallFrames->disableThreadingChecks(); |
| } |
| |
| Plan::~Plan() |
| { |
| } |
| |
| bool Plan::computeCompileTimes() const |
| { |
| return reportCompileTimes() |
| || Options::reportTotalCompileTimes() |
| || (m_vm && m_vm->m_perBytecodeProfiler); |
| } |
| |
| bool Plan::reportCompileTimes() const |
| { |
| return Options::reportCompileTimes() |
| || Options::reportDFGCompileTimes() |
| || (Options::reportFTLCompileTimes() && isFTL()); |
| } |
| |
| void Plan::compileInThread(ThreadData* threadData) |
| { |
| m_threadData = threadData; |
| |
| MonotonicTime before { }; |
| CString codeBlockName; |
| if (UNLIKELY(computeCompileTimes())) |
| before = MonotonicTime::now(); |
| if (UNLIKELY(reportCompileTimes())) |
| codeBlockName = toCString(*m_codeBlock); |
| |
| CompilationScope compilationScope; |
| |
| if (logCompilationChanges(m_mode) || Options::logPhaseTimes()) |
| dataLog("DFG(Plan) compiling ", *m_codeBlock, " with ", m_mode, ", instructions size = ", m_codeBlock->instructionsSize(), "\n"); |
| |
| CompilationPath path = compileInThreadImpl(); |
| |
| RELEASE_ASSERT(path == CancelPath || m_finalizer); |
| RELEASE_ASSERT((path == CancelPath) == (m_stage == Cancelled)); |
| |
| MonotonicTime after { }; |
| if (UNLIKELY(computeCompileTimes())) { |
| after = MonotonicTime::now(); |
| |
| if (Options::reportTotalCompileTimes()) { |
| if (isFTL()) { |
| totalFTLCompileTime += after - before; |
| totalFTLDFGCompileTime += m_timeBeforeFTL - before; |
| totalFTLB3CompileTime += after - m_timeBeforeFTL; |
| } else |
| totalDFGCompileTime += after - before; |
| } |
| } |
| const char* pathName = nullptr; |
| switch (path) { |
| case FailPath: |
| pathName = "N/A (fail)"; |
| break; |
| case DFGPath: |
| pathName = "DFG"; |
| break; |
| case FTLPath: |
| pathName = "FTL"; |
| break; |
| case CancelPath: |
| pathName = "Cancelled"; |
| break; |
| default: |
| RELEASE_ASSERT_NOT_REACHED(); |
| break; |
| } |
| if (m_codeBlock) { // m_codeBlock will be null if the compilation was cancelled. |
| if (path == FTLPath) |
| CODEBLOCK_LOG_EVENT(m_codeBlock, "ftlCompile", ("took ", (after - before).milliseconds(), " ms (DFG: ", (m_timeBeforeFTL - before).milliseconds(), ", B3: ", (after - m_timeBeforeFTL).milliseconds(), ") with ", pathName)); |
| else |
| CODEBLOCK_LOG_EVENT(m_codeBlock, "dfgCompile", ("took ", (after - before).milliseconds(), " ms with ", pathName)); |
| } |
| if (UNLIKELY(reportCompileTimes())) { |
| dataLog("Optimized ", codeBlockName, " using ", m_mode, " with ", pathName, " into ", m_finalizer ? m_finalizer->codeSize() : 0, " bytes in ", (after - before).milliseconds(), " ms"); |
| if (path == FTLPath) |
| dataLog(" (DFG: ", (m_timeBeforeFTL - before).milliseconds(), ", B3: ", (after - m_timeBeforeFTL).milliseconds(), ")"); |
| dataLog(".\n"); |
| } |
| } |
| |
| Plan::CompilationPath Plan::compileInThreadImpl() |
| { |
| { |
| CompilerTimingScope timingScope("DFG", "clean must handle values"); |
| cleanMustHandleValuesIfNecessary(); |
| } |
| |
| if (verboseCompilationEnabled(m_mode) && m_osrEntryBytecodeIndex) { |
| dataLog("\n"); |
| dataLog("Compiler must handle OSR entry from ", m_osrEntryBytecodeIndex, " with values: ", m_mustHandleValues, "\n"); |
| dataLog("\n"); |
| } |
| |
| Graph dfg(*m_vm, *this); |
| |
| { |
| CompilerTimingScope timingScope("DFG", "bytecode parser"); |
| parse(dfg); |
| } |
| |
| m_codeBlock->setCalleeSaveRegisters(RegisterSet::dfgCalleeSaveRegisters()); |
| |
| bool changed = false; |
| |
| #define RUN_PHASE(phase) \ |
| do { \ |
| if (Options::safepointBeforeEachPhase()) { \ |
| Safepoint::Result safepointResult; \ |
| { \ |
| GraphSafepoint safepoint(dfg, safepointResult); \ |
| } \ |
| if (safepointResult.didGetCancelled()) \ |
| return CancelPath; \ |
| } \ |
| dfg.nextPhase(); \ |
| changed |= phase(dfg); \ |
| } while (false); \ |
| |
| |
| // By this point the DFG bytecode parser will have potentially mutated various tables |
| // in the CodeBlock. This is a good time to perform an early shrink, which is more |
| // powerful than a late one. It's safe to do so because we haven't generated any code |
| // that references any of the tables directly, yet. |
| { |
| ConcurrentJSLocker locker(m_codeBlock->m_lock); |
| m_codeBlock->shrinkToFit(locker, CodeBlock::ShrinkMode::EarlyShrink); |
| } |
| |
| if (validationEnabled()) |
| validate(dfg); |
| |
| if (Options::dumpGraphAfterParsing()) { |
| dataLog("Graph after parsing:\n"); |
| dfg.dump(); |
| } |
| |
| RUN_PHASE(performLiveCatchVariablePreservationPhase); |
| |
| RUN_PHASE(performCPSRethreading); |
| RUN_PHASE(performUnification); |
| RUN_PHASE(performPredictionInjection); |
| |
| RUN_PHASE(performStaticExecutionCountEstimation); |
| |
| if (m_mode == FTLForOSREntryMode) { |
| bool result = performOSREntrypointCreation(dfg); |
| if (!result) { |
| m_finalizer = makeUnique<FailedFinalizer>(*this); |
| return FailPath; |
| } |
| RUN_PHASE(performCPSRethreading); |
| } |
| |
| if (validationEnabled()) |
| validate(dfg); |
| |
| RUN_PHASE(performBackwardsPropagation); |
| RUN_PHASE(performPredictionPropagation); |
| RUN_PHASE(performFixup); |
| RUN_PHASE(performInvalidationPointInjection); |
| RUN_PHASE(performTypeCheckHoisting); |
| |
| dfg.m_fixpointState = FixpointNotConverged; |
| |
| // For now we're back to avoiding a fixpoint. Note that we've ping-ponged on this decision |
| // many times. For maximum throughput, it's best to fixpoint. But the throughput benefit is |
| // small and not likely to show up in FTL anyway. On the other hand, not fixpointing means |
| // that the compiler compiles more quickly. We want the third tier to compile quickly, which |
| // not fixpointing accomplishes; and the fourth tier shouldn't need a fixpoint. |
| if (validationEnabled()) |
| validate(dfg); |
| |
| RUN_PHASE(performStrengthReduction); |
| RUN_PHASE(performCPSRethreading); |
| RUN_PHASE(performCFA); |
| RUN_PHASE(performConstantFolding); |
| changed = false; |
| RUN_PHASE(performCFGSimplification); |
| RUN_PHASE(performLocalCSE); |
| |
| if (validationEnabled()) |
| validate(dfg); |
| |
| RUN_PHASE(performCPSRethreading); |
| if (!isFTL()) { |
| // Only run this if we're not FTLing, because currently for a LoadVarargs that is forwardable and |
| // in a non-varargs inlined call frame, this will generate ForwardVarargs while the FTL |
| // ArgumentsEliminationPhase will create a sequence of GetStack+PutStacks. The GetStack+PutStack |
| // sequence then gets sunk, eliminating anything that looks like an escape for subsequent phases, |
| // while the ForwardVarargs doesn't get simplified until later (or not at all) and looks like an |
| // escape for all of the arguments. This then disables object allocation sinking. |
| // |
| // So, for now, we just disable this phase for the FTL. |
| // |
| // If we wanted to enable it, we'd have to do any of the following: |
| // - Enable ForwardVarargs->GetStack+PutStack strength reduction, and have that run before |
| // PutStack sinking and object allocation sinking. |
| // - Make VarargsForwarding emit a GetLocal+SetLocal sequence, that we can later turn into |
| // GetStack+PutStack. |
| // |
| // But, it's not super valuable to enable those optimizations, since the FTL |
| // ArgumentsEliminationPhase does everything that this phase does, and it doesn't introduce this |
| // pathology. |
| |
| RUN_PHASE(performVarargsForwarding); // Do this after CFG simplification and CPS rethreading. |
| } |
| if (changed) { |
| RUN_PHASE(performCFA); |
| RUN_PHASE(performConstantFolding); |
| } |
| |
| // If we're doing validation, then run some analyses, to give them an opportunity |
| // to self-validate. Now is as good a time as any to do this. |
| if (validationEnabled()) { |
| dfg.ensureCPSDominators(); |
| dfg.ensureCPSNaturalLoops(); |
| } |
| |
| switch (m_mode) { |
| case DFGMode: { |
| dfg.m_fixpointState = FixpointConverged; |
| |
| RUN_PHASE(performTierUpCheckInjection); |
| |
| RUN_PHASE(performFastStoreBarrierInsertion); |
| RUN_PHASE(performStoreBarrierClustering); |
| RUN_PHASE(performCleanUp); |
| RUN_PHASE(performCPSRethreading); |
| RUN_PHASE(performDCE); |
| RUN_PHASE(performPhantomInsertion); |
| RUN_PHASE(performStackLayout); |
| RUN_PHASE(performVirtualRegisterAllocation); |
| RUN_PHASE(performWatchpointCollection); |
| dumpAndVerifyGraph(dfg, "Graph after optimization:"); |
| |
| { |
| CompilerTimingScope timingScope("DFG", "machine code generation"); |
| |
| JITCompiler dataFlowJIT(dfg); |
| if (m_codeBlock->codeType() == FunctionCode) |
| dataFlowJIT.compileFunction(); |
| else |
| dataFlowJIT.compile(); |
| } |
| |
| return DFGPath; |
| } |
| |
| case FTLMode: |
| case FTLForOSREntryMode: { |
| #if ENABLE(FTL_JIT) |
| if (FTL::canCompile(dfg) == FTL::CannotCompile) { |
| m_finalizer = makeUnique<FailedFinalizer>(*this); |
| return FailPath; |
| } |
| |
| RUN_PHASE(performCleanUp); // Reduce the graph size a bit. |
| RUN_PHASE(performCriticalEdgeBreaking); |
| if (Options::createPreHeaders()) |
| RUN_PHASE(performLoopPreHeaderCreation); |
| RUN_PHASE(performCPSRethreading); |
| RUN_PHASE(performSSAConversion); |
| RUN_PHASE(performSSALowering); |
| |
| // Ideally, these would be run to fixpoint with the object allocation sinking phase. |
| RUN_PHASE(performArgumentsElimination); |
| if (Options::usePutStackSinking()) |
| RUN_PHASE(performPutStackSinking); |
| |
| RUN_PHASE(performConstantHoisting); |
| RUN_PHASE(performGlobalCSE); |
| RUN_PHASE(performLivenessAnalysis); |
| RUN_PHASE(performCFA); |
| RUN_PHASE(performConstantFolding); |
| RUN_PHASE(performCleanUp); // Reduce the graph size a lot. |
| changed = false; |
| RUN_PHASE(performStrengthReduction); |
| if (Options::useObjectAllocationSinking()) { |
| RUN_PHASE(performCriticalEdgeBreaking); |
| RUN_PHASE(performObjectAllocationSinking); |
| } |
| if (Options::useValueRepElimination()) |
| RUN_PHASE(performValueRepReduction); |
| if (changed) { |
| // State-at-tail and state-at-head will be invalid if we did strength reduction since |
| // it might increase live ranges. |
| RUN_PHASE(performLivenessAnalysis); |
| RUN_PHASE(performCFA); |
| RUN_PHASE(performConstantFolding); |
| } |
| |
| // Currently, this relies on pre-headers still being valid. That precludes running CFG |
| // simplification before it, unless we re-created the pre-headers. There wouldn't be anything |
| // wrong with running LICM earlier, if we wanted to put other CFG transforms above this point. |
| // Alternatively, we could run loop pre-header creation after SSA conversion - but if we did that |
| // then we'd need to do some simple SSA fix-up. |
| RUN_PHASE(performLivenessAnalysis); |
| RUN_PHASE(performCFA); |
| RUN_PHASE(performLICM); |
| |
| // FIXME: Currently: IntegerRangeOptimization *must* be run after LICM. |
| // |
| // IntegerRangeOptimization makes changes on nodes based on preceding blocks |
| // and nodes. LICM moves nodes which can invalidates assumptions used |
| // by IntegerRangeOptimization. |
| // |
| // Ideally, the dependencies should be explicit. See https://bugs.webkit.org/show_bug.cgi?id=157534. |
| RUN_PHASE(performLivenessAnalysis); |
| RUN_PHASE(performIntegerRangeOptimization); |
| |
| RUN_PHASE(performCleanUp); |
| RUN_PHASE(performIntegerCheckCombining); |
| RUN_PHASE(performGlobalCSE); |
| |
| // At this point we're not allowed to do any further code motion because our reasoning |
| // about code motion assumes that it's OK to insert GC points in random places. |
| dfg.m_fixpointState = FixpointConverged; |
| |
| RUN_PHASE(performLivenessAnalysis); |
| RUN_PHASE(performCFA); |
| RUN_PHASE(performGlobalStoreBarrierInsertion); |
| RUN_PHASE(performStoreBarrierClustering); |
| if (Options::useMovHintRemoval()) |
| RUN_PHASE(performMovHintRemoval); |
| RUN_PHASE(performCleanUp); |
| RUN_PHASE(performDCE); // We rely on this to kill dead code that won't be recognized as dead by B3. |
| RUN_PHASE(performStackLayout); |
| RUN_PHASE(performLivenessAnalysis); |
| RUN_PHASE(performOSRAvailabilityAnalysis); |
| RUN_PHASE(performWatchpointCollection); |
| |
| if (FTL::canCompile(dfg) == FTL::CannotCompile) { |
| m_finalizer = makeUnique<FailedFinalizer>(*this); |
| return FailPath; |
| } |
| |
| dfg.nextPhase(); |
| dumpAndVerifyGraph(dfg, "Graph just before FTL lowering:", shouldDumpDisassembly(m_mode)); |
| |
| // Flash a safepoint in case the GC wants some action. |
| Safepoint::Result safepointResult; |
| { |
| GraphSafepoint safepoint(dfg, safepointResult); |
| } |
| if (safepointResult.didGetCancelled()) |
| return CancelPath; |
| |
| dfg.nextPhase(); |
| FTL::State state(dfg); |
| FTL::lowerDFGToB3(state); |
| |
| if (UNLIKELY(computeCompileTimes())) |
| m_timeBeforeFTL = MonotonicTime::now(); |
| |
| if (UNLIKELY(Options::b3AlwaysFailsBeforeCompile())) { |
| FTL::fail(state); |
| return FTLPath; |
| } |
| |
| FTL::compile(state, safepointResult); |
| if (safepointResult.didGetCancelled()) |
| return CancelPath; |
| |
| if (UNLIKELY(Options::b3AlwaysFailsBeforeLink())) { |
| FTL::fail(state); |
| return FTLPath; |
| } |
| |
| if (state.allocationFailed) { |
| FTL::fail(state); |
| return FTLPath; |
| } |
| |
| FTL::link(state); |
| |
| if (state.allocationFailed) { |
| FTL::fail(state); |
| return FTLPath; |
| } |
| |
| return FTLPath; |
| #else |
| RELEASE_ASSERT_NOT_REACHED(); |
| return FailPath; |
| #endif // ENABLE(FTL_JIT) |
| } |
| |
| default: |
| RELEASE_ASSERT_NOT_REACHED(); |
| return FailPath; |
| } |
| |
| #undef RUN_PHASE |
| } |
| |
| bool Plan::isStillValid() |
| { |
| CodeBlock* replacement = m_codeBlock->replacement(); |
| if (!replacement) |
| return false; |
| // FIXME: This is almost certainly not necessary. There's no way for the baseline |
| // code to be replaced during a compilation, except if we delete the plan, in which |
| // case we wouldn't be here. |
| // https://bugs.webkit.org/show_bug.cgi?id=132707 |
| if (m_codeBlock->alternative() != replacement->baselineVersion()) |
| return false; |
| if (!m_watchpoints.areStillValid()) |
| return false; |
| return true; |
| } |
| |
| void Plan::reallyAdd(CommonData* commonData) |
| { |
| ASSERT(m_vm->heap.isDeferred()); |
| m_watchpoints.reallyAdd(m_codeBlock, *commonData); |
| m_identifiers.reallyAdd(*m_vm, commonData); |
| m_weakReferences.reallyAdd(*m_vm, commonData); |
| m_transitions.reallyAdd(*m_vm, commonData); |
| m_globalProperties.reallyAdd(m_codeBlock, m_identifiers, *commonData); |
| { |
| ConcurrentJSLocker locker(m_codeBlock->m_lock); |
| commonData->recordedStatuses = WTFMove(m_recordedStatuses); |
| } |
| } |
| |
| void Plan::notifyCompiling() |
| { |
| m_stage = Compiling; |
| } |
| |
| void Plan::notifyReady() |
| { |
| m_callback->compilationDidBecomeReadyAsynchronously(m_codeBlock, m_profiledDFGCodeBlock); |
| m_stage = Ready; |
| } |
| |
| bool Plan::isStillValidOnMainThread() |
| { |
| return m_globalProperties.isStillValidOnMainThread(*m_vm, m_identifiers); |
| } |
| |
| CompilationResult Plan::finalizeWithoutNotifyingCallback() |
| { |
| // We perform multiple stores before emitting a write-barrier. To ensure that no GC happens between store and write-barrier, we should ensure that |
| // GC is deferred when this function is called. |
| ASSERT(m_vm->heap.isDeferred()); |
| |
| CompilationResult result = [&] { |
| if (!isStillValidOnMainThread() || !isStillValid()) { |
| CODEBLOCK_LOG_EVENT(m_codeBlock, "dfgFinalize", ("invalidated")); |
| return CompilationInvalidated; |
| } |
| |
| bool result; |
| if (m_codeBlock->codeType() == FunctionCode) |
| result = m_finalizer->finalizeFunction(); |
| else |
| result = m_finalizer->finalize(); |
| |
| if (!result) { |
| CODEBLOCK_LOG_EVENT(m_codeBlock, "dfgFinalize", ("failed")); |
| return CompilationFailed; |
| } |
| |
| reallyAdd(m_codeBlock->jitCode()->dfgCommon()); |
| { |
| ConcurrentJSLocker locker(m_codeBlock->m_lock); |
| m_codeBlock->jitCode()->shrinkToFit(locker); |
| m_codeBlock->shrinkToFit(locker, CodeBlock::ShrinkMode::LateShrink); |
| } |
| |
| if (validationEnabled()) { |
| TrackedReferences trackedReferences; |
| |
| for (WriteBarrier<JSCell>& reference : m_codeBlock->jitCode()->dfgCommon()->weakReferences) |
| trackedReferences.add(reference.get()); |
| for (StructureID structureID : m_codeBlock->jitCode()->dfgCommon()->weakStructureReferences) |
| trackedReferences.add(m_vm->getStructure(structureID)); |
| for (WriteBarrier<Unknown>& constant : m_codeBlock->constants()) |
| trackedReferences.add(constant.get()); |
| |
| for (auto* inlineCallFrame : *m_inlineCallFrames) { |
| ASSERT(inlineCallFrame->baselineCodeBlock.get()); |
| trackedReferences.add(inlineCallFrame->baselineCodeBlock.get()); |
| } |
| |
| // Check that any other references that we have anywhere in the JITCode are also |
| // tracked either strongly or weakly. |
| m_codeBlock->jitCode()->validateReferences(trackedReferences); |
| } |
| |
| CODEBLOCK_LOG_EVENT(m_codeBlock, "dfgFinalize", ("succeeded")); |
| return CompilationSuccessful; |
| }(); |
| |
| // We will establish new references from the code block to things. So, we need a barrier. |
| m_vm->heap.writeBarrier(m_codeBlock); |
| return result; |
| } |
| |
| void Plan::finalizeAndNotifyCallback() |
| { |
| m_callback->compilationDidComplete(m_codeBlock, m_profiledDFGCodeBlock, finalizeWithoutNotifyingCallback()); |
| } |
| |
| CompilationKey Plan::key() |
| { |
| return CompilationKey(m_codeBlock->alternative(), m_mode); |
| } |
| |
| void Plan::checkLivenessAndVisitChildren(SlotVisitor& visitor) |
| { |
| if (!isKnownToBeLiveDuringGC()) |
| return; |
| |
| cleanMustHandleValuesIfNecessary(); |
| for (unsigned i = m_mustHandleValues.size(); i--;) { |
| Optional<JSValue> value = m_mustHandleValues[i]; |
| if (value) |
| visitor.appendUnbarriered(value.value()); |
| } |
| |
| m_recordedStatuses.visitAggregate(visitor); |
| m_recordedStatuses.markIfCheap(visitor); |
| |
| visitor.appendUnbarriered(m_codeBlock); |
| visitor.appendUnbarriered(m_codeBlock->alternative()); |
| visitor.appendUnbarriered(m_profiledDFGCodeBlock); |
| |
| if (m_inlineCallFrames) { |
| for (auto* inlineCallFrame : *m_inlineCallFrames) { |
| ASSERT(inlineCallFrame->baselineCodeBlock.get()); |
| visitor.appendUnbarriered(inlineCallFrame->baselineCodeBlock.get()); |
| } |
| } |
| |
| m_weakReferences.visitChildren(visitor); |
| m_transitions.visitChildren(visitor); |
| } |
| |
| void Plan::finalizeInGC() |
| { |
| ASSERT(m_vm); |
| m_recordedStatuses.finalizeWithoutDeleting(*m_vm); |
| } |
| |
| bool Plan::isKnownToBeLiveDuringGC() |
| { |
| if (m_stage == Cancelled) |
| return false; |
| if (!m_vm->heap.isMarked(m_codeBlock->ownerExecutable())) |
| return false; |
| if (!m_vm->heap.isMarked(m_codeBlock->alternative())) |
| return false; |
| if (!!m_profiledDFGCodeBlock && !m_vm->heap.isMarked(m_profiledDFGCodeBlock)) |
| return false; |
| return true; |
| } |
| |
| void Plan::cancel() |
| { |
| RELEASE_ASSERT(m_stage != Cancelled); |
| ASSERT(m_vm); |
| m_vm = nullptr; |
| |
| m_codeBlock = nullptr; |
| m_profiledDFGCodeBlock = nullptr; |
| m_mustHandleValues.clear(); |
| m_compilation = nullptr; |
| m_finalizer = nullptr; |
| m_inlineCallFrames = nullptr; |
| m_watchpoints = DesiredWatchpoints(); |
| m_identifiers = DesiredIdentifiers(); |
| m_globalProperties = DesiredGlobalProperties(); |
| m_weakReferences = DesiredWeakReferences(); |
| m_transitions = DesiredTransitions(); |
| m_callback = nullptr; |
| m_stage = Cancelled; |
| } |
| |
| void Plan::cleanMustHandleValuesIfNecessary() |
| { |
| LockHolder locker(m_mustHandleValueCleaningLock); |
| |
| if (!m_mustHandleValuesMayIncludeGarbage) |
| return; |
| |
| m_mustHandleValuesMayIncludeGarbage = false; |
| |
| if (!m_codeBlock) |
| return; |
| |
| if (!m_mustHandleValues.numberOfLocals()) |
| return; |
| |
| CodeBlock* alternative = m_codeBlock->alternative(); |
| FastBitVector liveness = alternative->livenessAnalysis().getLivenessInfoAtBytecodeIndex(alternative, m_osrEntryBytecodeIndex); |
| |
| for (unsigned local = m_mustHandleValues.numberOfLocals(); local--;) { |
| if (!liveness[local]) |
| m_mustHandleValues.local(local) = WTF::nullopt; |
| } |
| } |
| |
| } } // namespace JSC::DFG |
| |
| #endif // ENABLE(DFG_JIT) |
| |
