| /* |
| * Copyright (C) 2011 Google Inc. All rights reserved. |
| * Copyright (C) 2015-2016 Apple Inc. All rights reserved. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions are |
| * met: |
| * |
| * * Redistributions of source code must retain the above copyright |
| * notice, this list of conditions and the following disclaimer. |
| * * Redistributions in binary form must reproduce the above |
| * copyright notice, this list of conditions and the following disclaimer |
| * in the documentation and/or other materials provided with the |
| * distribution. |
| * * Neither the name of Google Inc. nor the names of its |
| * contributors may be used to endorse or promote products derived from |
| * this software without specific prior written permission. |
| * |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS |
| * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT |
| * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR |
| * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT |
| * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, |
| * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT |
| * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, |
| * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY |
| * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT |
| * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE |
| * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| */ |
| |
| #include "config.h" |
| #include "WebSocket.h" |
| |
| #include "Blob.h" |
| #include "CloseEvent.h" |
| #include "ContentSecurityPolicy.h" |
| #include "DOMWindow.h" |
| #include "Document.h" |
| #include "Event.h" |
| #include "EventListener.h" |
| #include "EventNames.h" |
| #include "Frame.h" |
| #include "FrameLoader.h" |
| #include "Logging.h" |
| #include "MessageEvent.h" |
| #include "ResourceLoadObserver.h" |
| #include "ScriptController.h" |
| #include "ScriptExecutionContext.h" |
| #include "SecurityOrigin.h" |
| #include "SocketProvider.h" |
| #include "ThreadableWebSocketChannel.h" |
| #include "WebSocketChannel.h" |
| #include <JavaScriptCore/ArrayBuffer.h> |
| #include <JavaScriptCore/ArrayBufferView.h> |
| #include <JavaScriptCore/ScriptCallStack.h> |
| #include <wtf/HashSet.h> |
| #include <wtf/HexNumber.h> |
| #include <wtf/IsoMallocInlines.h> |
| #include <wtf/NeverDestroyed.h> |
| #include <wtf/RunLoop.h> |
| #include <wtf/StdLibExtras.h> |
| #include <wtf/text/CString.h> |
| #include <wtf/text/StringBuilder.h> |
| |
| #if USE(WEB_THREAD) |
| #include "WebCoreThreadRun.h" |
| #endif |
| |
| namespace WebCore { |
| |
| WTF_MAKE_ISO_ALLOCATED_IMPL(WebSocket); |
| |
| const size_t maxReasonSizeInBytes = 123; |
| |
| static inline bool isValidProtocolCharacter(UChar character) |
| { |
| // Hybi-10 says "(Subprotocol string must consist of) characters in the range U+0021 to U+007E not including |
| // separator characters as defined in [RFC2616]." |
| const UChar minimumProtocolCharacter = '!'; // U+0021. |
| const UChar maximumProtocolCharacter = '~'; // U+007E. |
| return character >= minimumProtocolCharacter && character <= maximumProtocolCharacter |
| && character != '"' && character != '(' && character != ')' && character != ',' && character != '/' |
| && !(character >= ':' && character <= '@') // U+003A - U+0040 (':', ';', '<', '=', '>', '?', '@'). |
| && !(character >= '[' && character <= ']') // U+005B - U+005D ('[', '\\', ']'). |
| && character != '{' && character != '}'; |
| } |
| |
| static bool isValidProtocolString(StringView protocol) |
| { |
| if (protocol.isEmpty()) |
| return false; |
| for (auto codeUnit : protocol.codeUnits()) { |
| if (!isValidProtocolCharacter(codeUnit)) |
| return false; |
| } |
| return true; |
| } |
| |
| static String encodeProtocolString(const String& protocol) |
| { |
| StringBuilder builder; |
| for (size_t i = 0; i < protocol.length(); i++) { |
| if (protocol[i] < 0x20 || protocol[i] > 0x7E) { |
| builder.appendLiteral("\\u"); |
| appendUnsignedAsHexFixedSize(protocol[i], builder, 4); |
| } else if (protocol[i] == 0x5c) |
| builder.appendLiteral("\\\\"); |
| else |
| builder.append(protocol[i]); |
| } |
| return builder.toString(); |
| } |
| |
| static String joinStrings(const Vector<String>& strings, const char* separator) |
| { |
| StringBuilder builder; |
| for (size_t i = 0; i < strings.size(); ++i) { |
| if (i) |
| builder.append(separator); |
| builder.append(strings[i]); |
| } |
| return builder.toString(); |
| } |
| |
| static unsigned saturateAdd(unsigned a, unsigned b) |
| { |
| if (std::numeric_limits<unsigned>::max() - a < b) |
| return std::numeric_limits<unsigned>::max(); |
| return a + b; |
| } |
| |
| const char* WebSocket::subprotocolSeparator() |
| { |
| return ", "; |
| } |
| |
| WebSocket::WebSocket(ScriptExecutionContext& context) |
| : ActiveDOMObject(&context) |
| , m_subprotocol(emptyString()) |
| , m_extensions(emptyString()) |
| , m_resumeTimer(*this, &WebSocket::resumeTimerFired) |
| { |
| LockHolder lock(allActiveWebSocketsMutex()); |
| |
| allActiveWebSockets(lock).add(this); |
| } |
| |
| WebSocket::~WebSocket() |
| { |
| { |
| LockHolder lock(allActiveWebSocketsMutex()); |
| |
| allActiveWebSockets(lock).remove(this); |
| } |
| |
| if (m_channel) |
| m_channel->disconnect(); |
| } |
| |
| ExceptionOr<Ref<WebSocket>> WebSocket::create(ScriptExecutionContext& context, const String& url) |
| { |
| return create(context, url, Vector<String> { }); |
| } |
| |
| ExceptionOr<Ref<WebSocket>> WebSocket::create(ScriptExecutionContext& context, const String& url, const Vector<String>& protocols) |
| { |
| if (url.isNull()) |
| return Exception { SyntaxError }; |
| |
| auto socket = adoptRef(*new WebSocket(context)); |
| socket->suspendIfNeeded(); |
| |
| auto result = socket->connect(context.completeURL(url), protocols); |
| if (result.hasException()) |
| return result.releaseException(); |
| |
| return socket; |
| } |
| |
| ExceptionOr<Ref<WebSocket>> WebSocket::create(ScriptExecutionContext& context, const String& url, const String& protocol) |
| { |
| return create(context, url, Vector<String> { 1, protocol }); |
| } |
| |
| HashSet<WebSocket*>& WebSocket::allActiveWebSockets(const LockHolder&) |
| { |
| static NeverDestroyed<HashSet<WebSocket*>> activeWebSockets; |
| return activeWebSockets; |
| } |
| |
| Lock& WebSocket::allActiveWebSocketsMutex() |
| { |
| static Lock mutex; |
| return mutex; |
| } |
| |
| ExceptionOr<void> WebSocket::connect(const String& url) |
| { |
| return connect(url, Vector<String> { }); |
| } |
| |
| ExceptionOr<void> WebSocket::connect(const String& url, const String& protocol) |
| { |
| return connect(url, Vector<String> { 1, protocol }); |
| } |
| |
| ExceptionOr<void> WebSocket::connect(const String& url, const Vector<String>& protocols) |
| { |
| LOG(Network, "WebSocket %p connect() url='%s'", this, url.utf8().data()); |
| m_url = URL(URL(), url); |
| |
| ASSERT(scriptExecutionContext()); |
| auto& context = *scriptExecutionContext(); |
| |
| if (!m_url.isValid()) { |
| context.addConsoleMessage(MessageSource::JS, MessageLevel::Error, "Invalid url for WebSocket " + m_url.stringCenterEllipsizedToLength()); |
| m_state = CLOSED; |
| return Exception { SyntaxError }; |
| } |
| |
| if (!m_url.protocolIs("ws") && !m_url.protocolIs("wss")) { |
| context.addConsoleMessage(MessageSource::JS, MessageLevel::Error, "Wrong url scheme for WebSocket " + m_url.stringCenterEllipsizedToLength()); |
| m_state = CLOSED; |
| return Exception { SyntaxError }; |
| } |
| if (m_url.hasFragmentIdentifier()) { |
| context.addConsoleMessage(MessageSource::JS, MessageLevel::Error, "URL has fragment component " + m_url.stringCenterEllipsizedToLength()); |
| m_state = CLOSED; |
| return Exception { SyntaxError }; |
| } |
| |
| ASSERT(context.contentSecurityPolicy()); |
| auto& contentSecurityPolicy = *context.contentSecurityPolicy(); |
| |
| contentSecurityPolicy.upgradeInsecureRequestIfNeeded(m_url, ContentSecurityPolicy::InsecureRequestType::Load); |
| |
| if (!portAllowed(m_url)) { |
| String message; |
| if (m_url.port()) |
| message = makeString("WebSocket port ", static_cast<unsigned>(m_url.port().value()), " blocked"); |
| else |
| message = "WebSocket without port blocked"_s; |
| context.addConsoleMessage(MessageSource::JS, MessageLevel::Error, message); |
| m_state = CLOSED; |
| return Exception { SecurityError }; |
| } |
| |
| // FIXME: Convert this to check the isolated world's Content Security Policy once webkit.org/b/104520 is solved. |
| if (!context.shouldBypassMainWorldContentSecurityPolicy() && !contentSecurityPolicy.allowConnectToSource(m_url)) { |
| m_state = CLOSED; |
| |
| // FIXME: Should this be throwing an exception? |
| return Exception { SecurityError }; |
| } |
| |
| if (auto* provider = context.socketProvider()) |
| m_channel = ThreadableWebSocketChannel::create(*scriptExecutionContext(), *this, *provider); |
| |
| // Every ScriptExecutionContext should have a SocketProvider. |
| RELEASE_ASSERT(m_channel); |
| |
| // FIXME: There is a disagreement about restriction of subprotocols between WebSocket API and hybi-10 protocol |
| // draft. The former simply says "only characters in the range U+0021 to U+007E are allowed," while the latter |
| // imposes a stricter rule: "the elements MUST be non-empty strings with characters as defined in [RFC2616], |
| // and MUST all be unique strings." |
| // |
| // Here, we throw SyntaxError if the given protocols do not meet the latter criteria. This behavior does not |
| // comply with WebSocket API specification, but it seems to be the only reasonable way to handle this conflict. |
| for (auto& protocol : protocols) { |
| if (!isValidProtocolString(protocol)) { |
| context.addConsoleMessage(MessageSource::JS, MessageLevel::Error, "Wrong protocol for WebSocket '" + encodeProtocolString(protocol) + "'"); |
| m_state = CLOSED; |
| return Exception { SyntaxError }; |
| } |
| } |
| HashSet<String> visited; |
| for (auto& protocol : protocols) { |
| if (!visited.add(protocol).isNewEntry) { |
| context.addConsoleMessage(MessageSource::JS, MessageLevel::Error, "WebSocket protocols contain duplicates: '" + encodeProtocolString(protocol) + "'"); |
| m_state = CLOSED; |
| return Exception { SyntaxError }; |
| } |
| } |
| |
| RunLoop::main().dispatch([targetURL = m_url.isolatedCopy(), mainFrameURL = context.url().isolatedCopy(), sessionID = context.sessionID()]() { |
| ResourceLoadObserver::shared().logWebSocketLoading(targetURL, mainFrameURL, sessionID); |
| }); |
| |
| if (is<Document>(context)) { |
| Document& document = downcast<Document>(context); |
| RefPtr<Frame> frame = document.frame(); |
| if (!frame || !frame->loader().mixedContentChecker().canRunInsecureContent(document.securityOrigin(), m_url)) { |
| m_pendingActivity = makePendingActivity(*this); |
| |
| // We must block this connection. Instead of throwing an exception, we indicate this |
| // using the error event. But since this code executes as part of the WebSocket's |
| // constructor, we have to wait until the constructor has completed before firing the |
| // event; otherwise, users can't connect to the event. |
| |
| document.postTask([this, protectedThis = makeRef(*this)](auto&) { |
| this->dispatchOrQueueErrorEvent(); |
| this->stop(); |
| }); |
| |
| return { }; |
| } |
| } |
| |
| String protocolString; |
| if (!protocols.isEmpty()) |
| protocolString = joinStrings(protocols, subprotocolSeparator()); |
| |
| m_channel->connect(m_url, protocolString); |
| m_pendingActivity = makePendingActivity(*this); |
| |
| return { }; |
| } |
| |
| ExceptionOr<void> WebSocket::send(const String& message) |
| { |
| LOG(Network, "WebSocket %p send() Sending String '%s'", this, message.utf8().data()); |
| if (m_state == CONNECTING) |
| return Exception { InvalidStateError }; |
| // No exception is raised if the connection was once established but has subsequently been closed. |
| if (m_state == CLOSING || m_state == CLOSED) { |
| size_t payloadSize = message.utf8().length(); |
| m_bufferedAmountAfterClose = saturateAdd(m_bufferedAmountAfterClose, payloadSize); |
| m_bufferedAmountAfterClose = saturateAdd(m_bufferedAmountAfterClose, getFramingOverhead(payloadSize)); |
| return { }; |
| } |
| ASSERT(m_channel); |
| m_channel->send(message); |
| return { }; |
| } |
| |
| ExceptionOr<void> WebSocket::send(ArrayBuffer& binaryData) |
| { |
| LOG(Network, "WebSocket %p send() Sending ArrayBuffer %p", this, &binaryData); |
| if (m_state == CONNECTING) |
| return Exception { InvalidStateError }; |
| if (m_state == CLOSING || m_state == CLOSED) { |
| unsigned payloadSize = binaryData.byteLength(); |
| m_bufferedAmountAfterClose = saturateAdd(m_bufferedAmountAfterClose, payloadSize); |
| m_bufferedAmountAfterClose = saturateAdd(m_bufferedAmountAfterClose, getFramingOverhead(payloadSize)); |
| return { }; |
| } |
| ASSERT(m_channel); |
| m_channel->send(binaryData, 0, binaryData.byteLength()); |
| return { }; |
| } |
| |
| ExceptionOr<void> WebSocket::send(ArrayBufferView& arrayBufferView) |
| { |
| LOG(Network, "WebSocket %p send() Sending ArrayBufferView %p", this, &arrayBufferView); |
| |
| if (m_state == CONNECTING) |
| return Exception { InvalidStateError }; |
| if (m_state == CLOSING || m_state == CLOSED) { |
| unsigned payloadSize = arrayBufferView.byteLength(); |
| m_bufferedAmountAfterClose = saturateAdd(m_bufferedAmountAfterClose, payloadSize); |
| m_bufferedAmountAfterClose = saturateAdd(m_bufferedAmountAfterClose, getFramingOverhead(payloadSize)); |
| return { }; |
| } |
| ASSERT(m_channel); |
| m_channel->send(*arrayBufferView.unsharedBuffer(), arrayBufferView.byteOffset(), arrayBufferView.byteLength()); |
| return { }; |
| } |
| |
| ExceptionOr<void> WebSocket::send(Blob& binaryData) |
| { |
| LOG(Network, "WebSocket %p send() Sending Blob '%s'", this, binaryData.url().stringCenterEllipsizedToLength().utf8().data()); |
| if (m_state == CONNECTING) |
| return Exception { InvalidStateError }; |
| if (m_state == CLOSING || m_state == CLOSED) { |
| unsigned payloadSize = static_cast<unsigned>(binaryData.size()); |
| m_bufferedAmountAfterClose = saturateAdd(m_bufferedAmountAfterClose, payloadSize); |
| m_bufferedAmountAfterClose = saturateAdd(m_bufferedAmountAfterClose, getFramingOverhead(payloadSize)); |
| return { }; |
| } |
| ASSERT(m_channel); |
| m_channel->send(binaryData); |
| return { }; |
| } |
| |
| ExceptionOr<void> WebSocket::close(Optional<unsigned short> optionalCode, const String& reason) |
| { |
| int code = optionalCode ? optionalCode.value() : static_cast<int>(WebSocketChannel::CloseEventCodeNotSpecified); |
| if (code == WebSocketChannel::CloseEventCodeNotSpecified) |
| LOG(Network, "WebSocket %p close() without code and reason", this); |
| else { |
| LOG(Network, "WebSocket %p close() code=%d reason='%s'", this, code, reason.utf8().data()); |
| if (!(code == WebSocketChannel::CloseEventCodeNormalClosure || (WebSocketChannel::CloseEventCodeMinimumUserDefined <= code && code <= WebSocketChannel::CloseEventCodeMaximumUserDefined))) |
| return Exception { InvalidAccessError }; |
| CString utf8 = reason.utf8(StrictConversionReplacingUnpairedSurrogatesWithFFFD); |
| if (utf8.length() > maxReasonSizeInBytes) { |
| scriptExecutionContext()->addConsoleMessage(MessageSource::JS, MessageLevel::Error, "WebSocket close message is too long."_s); |
| return Exception { SyntaxError }; |
| } |
| } |
| |
| if (m_state == CLOSING || m_state == CLOSED) |
| return { }; |
| if (m_state == CONNECTING) { |
| m_state = CLOSING; |
| m_channel->fail("WebSocket is closed before the connection is established."); |
| return { }; |
| } |
| m_state = CLOSING; |
| if (m_channel) |
| m_channel->close(code, reason); |
| return { }; |
| } |
| |
| RefPtr<ThreadableWebSocketChannel> WebSocket::channel() const |
| { |
| return m_channel; |
| } |
| |
| const URL& WebSocket::url() const |
| { |
| return m_url; |
| } |
| |
| WebSocket::State WebSocket::readyState() const |
| { |
| return m_state; |
| } |
| |
| unsigned WebSocket::bufferedAmount() const |
| { |
| return saturateAdd(m_bufferedAmount, m_bufferedAmountAfterClose); |
| } |
| |
| String WebSocket::protocol() const |
| { |
| return m_subprotocol; |
| } |
| |
| String WebSocket::extensions() const |
| { |
| return m_extensions; |
| } |
| |
| String WebSocket::binaryType() const |
| { |
| switch (m_binaryType) { |
| case BinaryType::Blob: |
| return "blob"_s; |
| case BinaryType::ArrayBuffer: |
| return "arraybuffer"_s; |
| } |
| ASSERT_NOT_REACHED(); |
| return String(); |
| } |
| |
| ExceptionOr<void> WebSocket::setBinaryType(const String& binaryType) |
| { |
| if (binaryType == "blob") { |
| m_binaryType = BinaryType::Blob; |
| return { }; |
| } |
| if (binaryType == "arraybuffer") { |
| m_binaryType = BinaryType::ArrayBuffer; |
| return { }; |
| } |
| scriptExecutionContext()->addConsoleMessage(MessageSource::JS, MessageLevel::Error, "'" + binaryType + "' is not a valid value for binaryType; binaryType remains unchanged."); |
| return Exception { SyntaxError }; |
| } |
| |
| EventTargetInterface WebSocket::eventTargetInterface() const |
| { |
| return WebSocketEventTargetInterfaceType; |
| } |
| |
| ScriptExecutionContext* WebSocket::scriptExecutionContext() const |
| { |
| return ActiveDOMObject::scriptExecutionContext(); |
| } |
| |
| void WebSocket::contextDestroyed() |
| { |
| LOG(Network, "WebSocket %p contextDestroyed()", this); |
| ASSERT(!m_channel); |
| ASSERT(m_state == CLOSED); |
| ActiveDOMObject::contextDestroyed(); |
| } |
| |
| bool WebSocket::canSuspendForDocumentSuspension() const |
| { |
| return true; |
| } |
| |
| void WebSocket::suspend(ReasonForSuspension reason) |
| { |
| if (m_resumeTimer.isActive()) |
| m_resumeTimer.stop(); |
| |
| m_shouldDelayEventFiring = true; |
| |
| if (m_channel) { |
| if (reason == ReasonForSuspension::PageCache) { |
| // This will cause didClose() to be called. |
| m_channel->fail("WebSocket is closed due to suspension."); |
| } else |
| m_channel->suspend(); |
| } |
| } |
| |
| void WebSocket::resume() |
| { |
| if (m_channel) |
| m_channel->resume(); |
| else if (!m_pendingEvents.isEmpty() && !m_resumeTimer.isActive()) { |
| // Fire the pending events in a timer as we are not allowed to execute arbitrary JS from resume(). |
| m_resumeTimer.startOneShot(0_s); |
| } |
| |
| m_shouldDelayEventFiring = false; |
| } |
| |
| void WebSocket::resumeTimerFired() |
| { |
| Ref<WebSocket> protectedThis(*this); |
| |
| ASSERT(!m_pendingEvents.isEmpty()); |
| |
| // Check m_shouldDelayEventFiring when iterating in case firing an event causes |
| // suspend() to be called. |
| while (!m_pendingEvents.isEmpty() && !m_shouldDelayEventFiring) |
| dispatchEvent(m_pendingEvents.takeFirst()); |
| } |
| |
| void WebSocket::stop() |
| { |
| if (m_channel) |
| m_channel->disconnect(); |
| m_channel = nullptr; |
| m_state = CLOSED; |
| m_pendingEvents.clear(); |
| ActiveDOMObject::stop(); |
| m_pendingActivity = nullptr; |
| } |
| |
| const char* WebSocket::activeDOMObjectName() const |
| { |
| return "WebSocket"; |
| } |
| |
| void WebSocket::didConnect() |
| { |
| LOG(Network, "WebSocket %p didConnect()", this); |
| if (m_state != CONNECTING) { |
| didClose(0, ClosingHandshakeIncomplete, WebSocketChannel::CloseEventCodeAbnormalClosure, emptyString()); |
| return; |
| } |
| ASSERT(scriptExecutionContext()); |
| m_state = OPEN; |
| m_subprotocol = m_channel->subprotocol(); |
| m_extensions = m_channel->extensions(); |
| dispatchEvent(Event::create(eventNames().openEvent, Event::CanBubble::No, Event::IsCancelable::No)); |
| } |
| |
| void WebSocket::didReceiveMessage(const String& msg) |
| { |
| LOG(Network, "WebSocket %p didReceiveMessage() Text message '%s'", this, msg.utf8().data()); |
| if (m_state != OPEN) |
| return; |
| ASSERT(scriptExecutionContext()); |
| dispatchEvent(MessageEvent::create(msg, SecurityOrigin::create(m_url)->toString())); |
| } |
| |
| void WebSocket::didReceiveBinaryData(Vector<uint8_t>&& binaryData) |
| { |
| LOG(Network, "WebSocket %p didReceiveBinaryData() %u byte binary message", this, static_cast<unsigned>(binaryData.size())); |
| switch (m_binaryType) { |
| case BinaryType::Blob: |
| // FIXME: We just received the data from NetworkProcess, and are sending it back. This is inefficient. |
| dispatchEvent(MessageEvent::create(Blob::create(WTFMove(binaryData), emptyString()), SecurityOrigin::create(m_url)->toString())); |
| break; |
| case BinaryType::ArrayBuffer: |
| dispatchEvent(MessageEvent::create(ArrayBuffer::create(binaryData.data(), binaryData.size()), SecurityOrigin::create(m_url)->toString())); |
| break; |
| } |
| } |
| |
| void WebSocket::didReceiveMessageError() |
| { |
| LOG(Network, "WebSocket %p didReceiveErrorMessage()", this); |
| m_state = CLOSED; |
| ASSERT(scriptExecutionContext()); |
| dispatchOrQueueErrorEvent(); |
| } |
| |
| void WebSocket::didUpdateBufferedAmount(unsigned bufferedAmount) |
| { |
| LOG(Network, "WebSocket %p didUpdateBufferedAmount() New bufferedAmount is %u", this, bufferedAmount); |
| if (m_state == CLOSED) |
| return; |
| m_bufferedAmount = bufferedAmount; |
| } |
| |
| void WebSocket::didStartClosingHandshake() |
| { |
| LOG(Network, "WebSocket %p didStartClosingHandshake()", this); |
| m_state = CLOSING; |
| } |
| |
| void WebSocket::didClose(unsigned unhandledBufferedAmount, ClosingHandshakeCompletionStatus closingHandshakeCompletion, unsigned short code, const String& reason) |
| { |
| LOG(Network, "WebSocket %p didClose()", this); |
| if (!m_channel) |
| return; |
| bool wasClean = m_state == CLOSING && !unhandledBufferedAmount && closingHandshakeCompletion == ClosingHandshakeComplete && code != WebSocketChannel::CloseEventCodeAbnormalClosure; |
| m_state = CLOSED; |
| m_bufferedAmount = unhandledBufferedAmount; |
| ASSERT(scriptExecutionContext()); |
| |
| dispatchOrQueueEvent(CloseEvent::create(wasClean, code, reason)); |
| |
| if (m_channel) { |
| m_channel->disconnect(); |
| m_channel = nullptr; |
| } |
| m_pendingActivity = nullptr; |
| } |
| |
| void WebSocket::didUpgradeURL() |
| { |
| ASSERT(m_url.protocolIs("ws")); |
| m_url.setProtocol("wss"); |
| } |
| |
| size_t WebSocket::getFramingOverhead(size_t payloadSize) |
| { |
| static const size_t hybiBaseFramingOverhead = 2; // Every frame has at least two-byte header. |
| static const size_t hybiMaskingKeyLength = 4; // Every frame from client must have masking key. |
| static const size_t minimumPayloadSizeWithTwoByteExtendedPayloadLength = 126; |
| static const size_t minimumPayloadSizeWithEightByteExtendedPayloadLength = 0x10000; |
| size_t overhead = hybiBaseFramingOverhead + hybiMaskingKeyLength; |
| if (payloadSize >= minimumPayloadSizeWithEightByteExtendedPayloadLength) |
| overhead += 8; |
| else if (payloadSize >= minimumPayloadSizeWithTwoByteExtendedPayloadLength) |
| overhead += 2; |
| return overhead; |
| } |
| |
| void WebSocket::dispatchOrQueueErrorEvent() |
| { |
| if (m_dispatchedErrorEvent) |
| return; |
| |
| m_dispatchedErrorEvent = true; |
| dispatchOrQueueEvent(Event::create(eventNames().errorEvent, Event::CanBubble::No, Event::IsCancelable::No)); |
| } |
| |
| void WebSocket::dispatchOrQueueEvent(Ref<Event>&& event) |
| { |
| if (m_shouldDelayEventFiring) |
| m_pendingEvents.append(WTFMove(event)); |
| else |
| dispatchEvent(event); |
| } |
| |
| } // namespace WebCore |