blob: b9f6120181d4f2a24158b317feec922f2d3f3e90 [file] [log] [blame]
/*
* Copyright (c) 2018 The WebRTC project authors. All Rights Reserved.
*
* Use of this source code is governed by a BSD-style license
* that can be found in the LICENSE file in the root of the source
* tree. An additional intellectual property rights grant can be found
* in the file PATENTS. All contributing project authors may
* be found in the AUTHORS file in the root of the source tree.
*/
#include "modules/audio_processing/aec3/reverb_decay_estimator.h"
#include <stddef.h>
#include <algorithm>
#include <cmath>
#include <numeric>
#include "api/array_view.h"
#include "api/audio/echo_canceller3_config.h"
#include "modules/audio_processing/logging/apm_data_dumper.h"
#include "rtc_base/checks.h"
namespace webrtc {
namespace {
constexpr int kEarlyReverbMinSizeBlocks = 3;
constexpr int kBlocksPerSection = 6;
// Linear regression approach assumes symmetric index around 0.
constexpr float kEarlyReverbFirstPointAtLinearRegressors =
-0.5f * kBlocksPerSection * kFftLengthBy2 + 0.5f;
// Averages the values in a block of size kFftLengthBy2;
float BlockAverage(rtc::ArrayView<const float> v, size_t block_index) {
constexpr float kOneByFftLengthBy2 = 1.f / kFftLengthBy2;
const int i = block_index * kFftLengthBy2;
RTC_DCHECK_GE(v.size(), i + kFftLengthBy2);
const float sum =
std::accumulate(v.begin() + i, v.begin() + i + kFftLengthBy2, 0.f);
return sum * kOneByFftLengthBy2;
}
// Analyzes the gain in a block.
void AnalyzeBlockGain(const std::array<float, kFftLengthBy2>& h2,
float floor_gain,
float* previous_gain,
bool* block_adapting,
bool* decaying_gain) {
float gain = std::max(BlockAverage(h2, 0), 1e-32f);
*block_adapting =
*previous_gain > 1.1f * gain || *previous_gain < 0.9f * gain;
*decaying_gain = gain > floor_gain;
*previous_gain = gain;
}
// Arithmetic sum of $2 \sum_{i=0.5}^{(N-1)/2}i^2$ calculated directly.
constexpr float SymmetricArithmetricSum(int N) {
return N * (N * N - 1.0f) * (1.f / 12.f);
}
// Returns the peak energy of an impulse response.
float BlockEnergyPeak(rtc::ArrayView<const float> h, int peak_block) {
RTC_DCHECK_LE((peak_block + 1) * kFftLengthBy2, h.size());
RTC_DCHECK_GE(peak_block, 0);
float peak_value =
*std::max_element(h.begin() + peak_block * kFftLengthBy2,
h.begin() + (peak_block + 1) * kFftLengthBy2,
[](float a, float b) { return a * a < b * b; });
return peak_value * peak_value;
}
// Returns the average energy of an impulse response block.
float BlockEnergyAverage(rtc::ArrayView<const float> h, int block_index) {
RTC_DCHECK_LE((block_index + 1) * kFftLengthBy2, h.size());
RTC_DCHECK_GE(block_index, 0);
constexpr float kOneByFftLengthBy2 = 1.f / kFftLengthBy2;
const auto sum_of_squares = [](float a, float b) { return a + b * b; };
return std::accumulate(h.begin() + block_index * kFftLengthBy2,
h.begin() + (block_index + 1) * kFftLengthBy2, 0.f,
sum_of_squares) *
kOneByFftLengthBy2;
}
} // namespace
ReverbDecayEstimator::ReverbDecayEstimator(const EchoCanceller3Config& config)
: filter_length_blocks_(config.filter.main.length_blocks),
filter_length_coefficients_(GetTimeDomainLength(filter_length_blocks_)),
use_adaptive_echo_decay_(config.ep_strength.default_len < 0.f),
early_reverb_estimator_(config.filter.main.length_blocks -
kEarlyReverbMinSizeBlocks),
late_reverb_start_(kEarlyReverbMinSizeBlocks),
late_reverb_end_(kEarlyReverbMinSizeBlocks),
previous_gains_(config.filter.main.length_blocks, 0.f),
decay_(std::fabs(config.ep_strength.default_len)) {
RTC_DCHECK_GT(config.filter.main.length_blocks,
static_cast<size_t>(kEarlyReverbMinSizeBlocks));
}
ReverbDecayEstimator::~ReverbDecayEstimator() = default;
void ReverbDecayEstimator::Update(rtc::ArrayView<const float> filter,
const absl::optional<float>& filter_quality,
int filter_delay_blocks,
bool usable_linear_filter,
bool stationary_signal) {
const int filter_size = static_cast<int>(filter.size());
if (stationary_signal) {
return;
}
bool estimation_feasible =
filter_delay_blocks <=
filter_length_blocks_ - kEarlyReverbMinSizeBlocks - 1;
estimation_feasible =
estimation_feasible && filter_size == filter_length_coefficients_;
estimation_feasible = estimation_feasible && filter_delay_blocks > 0;
estimation_feasible = estimation_feasible && usable_linear_filter;
if (!estimation_feasible) {
ResetDecayEstimation();
return;
}
if (!use_adaptive_echo_decay_) {
return;
}
const float new_smoothing = filter_quality ? *filter_quality * 0.2f : 0.f;
smoothing_constant_ = std::max(new_smoothing, smoothing_constant_);
if (smoothing_constant_ == 0.f) {
return;
}
if (block_to_analyze_ < filter_length_blocks_) {
// Analyze the filter and accumulate data for reverb estimation.
AnalyzeFilter(filter);
++block_to_analyze_;
} else {
// When the filter is fully analyzed, estimate the reverb decay and reset
// the block_to_analyze_ counter.
EstimateDecay(filter, filter_delay_blocks);
}
}
void ReverbDecayEstimator::ResetDecayEstimation() {
early_reverb_estimator_.Reset();
late_reverb_decay_estimator_.Reset(0);
block_to_analyze_ = 0;
estimation_region_candidate_size_ = 0;
estimation_region_identified_ = false;
smoothing_constant_ = 0.f;
late_reverb_start_ = 0;
late_reverb_end_ = 0;
}
void ReverbDecayEstimator::EstimateDecay(rtc::ArrayView<const float> filter,
int peak_block) {
auto& h = filter;
RTC_DCHECK_EQ(0, h.size() % kFftLengthBy2);
// Reset the block analysis counter.
block_to_analyze_ =
std::min(peak_block + kEarlyReverbMinSizeBlocks, filter_length_blocks_);
// To estimate the reverb decay, the energy of the first filter section must
// be substantially larger than the last. Also, the first filter section
// energy must not deviate too much from the max peak.
const float first_reverb_gain = BlockEnergyAverage(h, block_to_analyze_);
const size_t h_size_blocks = h.size() >> kFftLengthBy2Log2;
tail_gain_ = BlockEnergyAverage(h, h_size_blocks - 1);
float peak_energy = BlockEnergyPeak(h, peak_block);
const bool sufficient_reverb_decay = first_reverb_gain > 4.f * tail_gain_;
const bool valid_filter =
first_reverb_gain > 2.f * tail_gain_ && peak_energy < 100.f;
// Estimate the size of the regions with early and late reflections.
const int size_early_reverb = early_reverb_estimator_.Estimate();
const int size_late_reverb =
std::max(estimation_region_candidate_size_ - size_early_reverb, 0);
// Only update the reverb decay estimate if the size of the identified late
// reverb is sufficiently large.
if (size_late_reverb >= 5) {
if (valid_filter && late_reverb_decay_estimator_.EstimateAvailable()) {
float decay = std::pow(
2.0f, late_reverb_decay_estimator_.Estimate() * kFftLengthBy2);
constexpr float kMaxDecay = 0.95f; // ~1 sec min RT60.
constexpr float kMinDecay = 0.02f; // ~15 ms max RT60.
decay = std::max(.97f * decay_, decay);
decay = std::min(decay, kMaxDecay);
decay = std::max(decay, kMinDecay);
decay_ += smoothing_constant_ * (decay - decay_);
}
// Update length of decay. Must have enough data (number of sections) in
// order to estimate decay rate.
late_reverb_decay_estimator_.Reset(size_late_reverb * kFftLengthBy2);
late_reverb_start_ =
peak_block + kEarlyReverbMinSizeBlocks + size_early_reverb;
late_reverb_end_ =
block_to_analyze_ + estimation_region_candidate_size_ - 1;
} else {
late_reverb_decay_estimator_.Reset(0);
late_reverb_start_ = 0;
late_reverb_end_ = 0;
}
// Reset variables for the identification of the region for reverb decay
// estimation.
estimation_region_identified_ = !(valid_filter && sufficient_reverb_decay);
estimation_region_candidate_size_ = 0;
// Stop estimation of the decay until another good filter is received.
smoothing_constant_ = 0.f;
// Reset early reflections detector.
early_reverb_estimator_.Reset();
}
void ReverbDecayEstimator::AnalyzeFilter(rtc::ArrayView<const float> filter) {
auto h = rtc::ArrayView<const float>(
filter.begin() + block_to_analyze_ * kFftLengthBy2, kFftLengthBy2);
// Compute squared filter coeffiecients for the block to analyze_;
std::array<float, kFftLengthBy2> h2;
std::transform(h.begin(), h.end(), h2.begin(), [](float a) { return a * a; });
// Map out the region for estimating the reverb decay.
bool adapting;
bool above_noise_floor;
AnalyzeBlockGain(h2, tail_gain_, &previous_gains_[block_to_analyze_],
&adapting, &above_noise_floor);
// Count consecutive number of "good" filter sections, where "good" means:
// 1) energy is above noise floor.
// 2) energy of current section has not changed too much from last check.
estimation_region_identified_ =
estimation_region_identified_ || adapting || !above_noise_floor;
if (!estimation_region_identified_) {
++estimation_region_candidate_size_;
}
// Accumulate data for reverb decay estimation and for the estimation of early
// reflections.
if (block_to_analyze_ <= late_reverb_end_) {
if (block_to_analyze_ >= late_reverb_start_) {
for (float h2_k : h2) {
float h2_log2 = FastApproxLog2f(h2_k + 1e-10);
late_reverb_decay_estimator_.Accumulate(h2_log2);
early_reverb_estimator_.Accumulate(h2_log2, smoothing_constant_);
}
} else {
for (float h2_k : h2) {
float h2_log2 = FastApproxLog2f(h2_k + 1e-10);
early_reverb_estimator_.Accumulate(h2_log2, smoothing_constant_);
}
}
}
}
void ReverbDecayEstimator::Dump(ApmDataDumper* data_dumper) const {
data_dumper->DumpRaw("aec3_reverb_decay", decay_);
data_dumper->DumpRaw("aec3_reverb_tail_energy", tail_gain_);
data_dumper->DumpRaw("aec3_reverb_alpha", smoothing_constant_);
data_dumper->DumpRaw("aec3_num_reverb_decay_blocks",
late_reverb_end_ - late_reverb_start_);
data_dumper->DumpRaw("aec3_late_reverb_start", late_reverb_start_);
data_dumper->DumpRaw("aec3_late_reverb_end", late_reverb_end_);
early_reverb_estimator_.Dump(data_dumper);
}
void ReverbDecayEstimator::LateReverbLinearRegressor::Reset(
int num_data_points) {
RTC_DCHECK_LE(0, num_data_points);
RTC_DCHECK_EQ(0, num_data_points % 2);
const int N = num_data_points;
nz_ = 0.f;
// Arithmetic sum of $2 \sum_{i=0.5}^{(N-1)/2}i^2$ calculated directly.
nn_ = SymmetricArithmetricSum(N);
// The linear regression approach assumes symmetric index around 0.
count_ = N > 0 ? -N * 0.5f + 0.5f : 0.f;
N_ = N;
n_ = 0;
}
void ReverbDecayEstimator::LateReverbLinearRegressor::Accumulate(float z) {
nz_ += count_ * z;
++count_;
++n_;
}
float ReverbDecayEstimator::LateReverbLinearRegressor::Estimate() {
RTC_DCHECK(EstimateAvailable());
if (nn_ == 0.f) {
RTC_NOTREACHED();
return 0.f;
}
return nz_ / nn_;
}
ReverbDecayEstimator::EarlyReverbLengthEstimator::EarlyReverbLengthEstimator(
int max_blocks)
: numerators_smooth_(max_blocks - kBlocksPerSection, 0.f),
numerators_(numerators_smooth_.size(), 0.f),
coefficients_counter_(0) {
RTC_DCHECK_LE(0, max_blocks);
}
ReverbDecayEstimator::EarlyReverbLengthEstimator::
~EarlyReverbLengthEstimator() = default;
void ReverbDecayEstimator::EarlyReverbLengthEstimator::Reset() {
coefficients_counter_ = 0;
std::fill(numerators_.begin(), numerators_.end(), 0.f);
block_counter_ = 0;
}
void ReverbDecayEstimator::EarlyReverbLengthEstimator::Accumulate(
float value,
float smoothing) {
// Each section is composed by kBlocksPerSection blocks and each section
// overlaps with the next one in (kBlocksPerSection - 1) blocks. For example,
// the first section covers the blocks [0:5], the second covers the blocks
// [1:6] and so on. As a result, for each value, kBlocksPerSection sections
// need to be updated.
int first_section_index = std::max(block_counter_ - kBlocksPerSection + 1, 0);
int last_section_index =
std::min(block_counter_, static_cast<int>(numerators_.size() - 1));
float x_value = static_cast<float>(coefficients_counter_) +
kEarlyReverbFirstPointAtLinearRegressors;
const float value_to_inc = kFftLengthBy2 * value;
float value_to_add =
x_value * value + (block_counter_ - last_section_index) * value_to_inc;
for (int section = last_section_index; section >= first_section_index;
--section, value_to_add += value_to_inc) {
numerators_[section] += value_to_add;
}
// Check if this update was the last coefficient of the current block. In that
// case, check if we are at the end of one of the sections and update the
// numerator of the linear regressor that is computed in such section.
if (++coefficients_counter_ == kFftLengthBy2) {
if (block_counter_ >= (kBlocksPerSection - 1)) {
size_t section = block_counter_ - (kBlocksPerSection - 1);
RTC_DCHECK_GT(numerators_.size(), section);
RTC_DCHECK_GT(numerators_smooth_.size(), section);
numerators_smooth_[section] +=
smoothing * (numerators_[section] - numerators_smooth_[section]);
n_sections_ = section + 1;
}
++block_counter_;
coefficients_counter_ = 0;
}
}
// Estimates the size in blocks of the early reverb. The estimation is done by
// comparing the tilt that is estimated in each section. As an optimization
// detail and due to the fact that all the linear regressors that are computed
// shared the same denominator, the comparison of the tilts is done by a
// comparison of the numerator of the linear regressors.
int ReverbDecayEstimator::EarlyReverbLengthEstimator::Estimate() {
constexpr float N = kBlocksPerSection * kFftLengthBy2;
constexpr float nn = SymmetricArithmetricSum(N);
// numerator_11 refers to the quantity that the linear regressor needs in the
// numerator for getting a decay equal to 1.1 (which is not a decay).
// log2(1.1) * nn / kFftLengthBy2.
constexpr float numerator_11 = 0.13750352374993502f * nn / kFftLengthBy2;
// log2(0.8) * nn / kFftLengthBy2.
constexpr float numerator_08 = -0.32192809488736229f * nn / kFftLengthBy2;
constexpr int kNumSectionsToAnalyze = 9;
if (n_sections_ < kNumSectionsToAnalyze) {
return 0;
}
// Estimation of the blocks that correspond to early reverberations. The
// estimation is done by analyzing the impulse response. The portions of the
// impulse response whose energy is not decreasing over its coefficients are
// considered to be part of the early reverberations. Furthermore, the blocks
// where the energy is decreasing faster than what it does at the end of the
// impulse response are also considered to be part of the early
// reverberations. The estimation is limited to the first
// kNumSectionsToAnalyze sections.
RTC_DCHECK_LE(n_sections_, numerators_smooth_.size());
const float min_numerator_tail =
*std::min_element(numerators_smooth_.begin() + kNumSectionsToAnalyze,
numerators_smooth_.begin() + n_sections_);
int early_reverb_size_minus_1 = 0;
for (int k = 0; k < kNumSectionsToAnalyze; ++k) {
if ((numerators_smooth_[k] > numerator_11) ||
(numerators_smooth_[k] < numerator_08 &&
numerators_smooth_[k] < 0.9f * min_numerator_tail)) {
early_reverb_size_minus_1 = k;
}
}
return early_reverb_size_minus_1 == 0 ? 0 : early_reverb_size_minus_1 + 1;
}
void ReverbDecayEstimator::EarlyReverbLengthEstimator::Dump(
ApmDataDumper* data_dumper) const {
data_dumper->DumpRaw("aec3_er_acum_numerator", numerators_smooth_);
}
} // namespace webrtc