Source/JavaScriptCore/dfg/DFGOSRExitCompilerCommon.cpp - WebKit - Git at Google

 /*
  * Copyright (C) 2013-2019 Apple Inc. All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
  * modification, are permitted provided that the following conditions
  * are met:
  * 1. Redistributions of source code must retain the above copyright
  *    notice, this list of conditions and the following disclaimer.
  * 2. Redistributions in binary form must reproduce the above copyright
  *    notice, this list of conditions and the following disclaimer in the
  *    documentation and/or other materials provided with the distribution.
  *
  * THIS SOFTWARE IS PROVIDED BY APPLE INC. ``AS IS'' AND ANY
  * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
  * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL APPLE INC. OR
  * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
  * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
  * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
  * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY
  * OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
  * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  */

 #include "config.h"
 #include "DFGOSRExitCompilerCommon.h"

 #if ENABLE(DFG_JIT)

 #include "Bytecodes.h"
 #include "DFGJITCode.h"
 #include "DFGOperations.h"
 #include "JIT.h"
 #include "JSCJSValueInlines.h"
 #include "JSCInlines.h"
 #include "LLIntData.h"
 #include "StructureStubInfo.h"

 namespace JSC { namespace DFG {

 void handleExitCounts(VM& vm, CCallHelpers& jit, const OSRExitBase& exit)
 {
     if (!exitKindMayJettison(exit.m_kind)) {
         // FIXME: We may want to notice that we're frequently exiting
         // at an op_catch that we didn't compile an entrypoint for, and
         // then trigger a reoptimization of this CodeBlock:
         // https://bugs.webkit.org/show_bug.cgi?id=175842
         return;
     }

     jit.add32(AssemblyHelpers::TrustedImm32(1), AssemblyHelpers::AbsoluteAddress(&exit.m_count));

     jit.move(AssemblyHelpers::TrustedImmPtr(jit.codeBlock()), GPRInfo::regT3);

     AssemblyHelpers::Jump tooFewFails;

     jit.load32(AssemblyHelpers::Address(GPRInfo::regT3, CodeBlock::offsetOfOSRExitCounter()), GPRInfo::regT2);
     jit.add32(AssemblyHelpers::TrustedImm32(1), GPRInfo::regT2);
     jit.store32(GPRInfo::regT2, AssemblyHelpers::Address(GPRInfo::regT3, CodeBlock::offsetOfOSRExitCounter()));

     jit.move(AssemblyHelpers::TrustedImmPtr(jit.baselineCodeBlock()), GPRInfo::regT0);
     AssemblyHelpers::Jump reoptimizeNow = jit.branch32(
         AssemblyHelpers::GreaterThanOrEqual,
         AssemblyHelpers::Address(GPRInfo::regT0, CodeBlock::offsetOfJITExecuteCounter()),
         AssemblyHelpers::TrustedImm32(0));

     // We want to figure out if there's a possibility that we're in a loop. For the outermost
     // code block in the inline stack, we handle this appropriately by having the loop OSR trigger
     // check the exit count of the replacement of the CodeBlock from which we are OSRing. The
     // problem is the inlined functions, which might also have loops, but whose baseline versions
     // don't know where to look for the exit count. Figure out if those loops are severe enough
     // that we had tried to OSR enter. If so, then we should use the loop reoptimization trigger.
     // Otherwise, we should use the normal reoptimization trigger.

     AssemblyHelpers::JumpList loopThreshold;

     for (InlineCallFrame* inlineCallFrame = exit.m_codeOrigin.inlineCallFrame(); inlineCallFrame; inlineCallFrame = inlineCallFrame->directCaller.inlineCallFrame()) {
         loopThreshold.append(
             jit.branchTest8(
                 AssemblyHelpers::NonZero,
                 AssemblyHelpers::AbsoluteAddress(
                     inlineCallFrame->baselineCodeBlock->ownerExecutable()->addressOfDidTryToEnterInLoop())));
     }

     jit.move(
         AssemblyHelpers::TrustedImm32(jit.codeBlock()->exitCountThresholdForReoptimization()),
         GPRInfo::regT1);

     if (!loopThreshold.empty()) {
         AssemblyHelpers::Jump done = jit.jump();

         loopThreshold.link(&jit);
         jit.move(
             AssemblyHelpers::TrustedImm32(
                 jit.codeBlock()->exitCountThresholdForReoptimizationFromLoop()),
             GPRInfo::regT1);

         done.link(&jit);
     }

     tooFewFails = jit.branch32(AssemblyHelpers::BelowOrEqual, GPRInfo::regT2, GPRInfo::regT1);

     reoptimizeNow.link(&jit);

     jit.setupArguments<decltype(operationTriggerReoptimizationNow)>(GPRInfo::regT0, GPRInfo::regT3, AssemblyHelpers::TrustedImmPtr(&exit));
     jit.prepareCallOperation(vm);
     jit.move(AssemblyHelpers::TrustedImmPtr(tagCFunctionPtr<OperationPtrTag>(operationTriggerReoptimizationNow)), GPRInfo::nonArgGPR0);
     jit.call(GPRInfo::nonArgGPR0, OperationPtrTag);
     AssemblyHelpers::Jump doneAdjusting = jit.jump();

     tooFewFails.link(&jit);

     // Adjust the execution counter such that the target is to only optimize after a while.
     int32_t activeThreshold =
         jit.baselineCodeBlock()->adjustedCounterValue(
             Options::thresholdForOptimizeAfterLongWarmUp());
     int32_t targetValue = applyMemoryUsageHeuristicsAndConvertToInt(
         activeThreshold, jit.baselineCodeBlock());
     int32_t clippedValue;
     switch (jit.codeBlock()->jitType()) {
     case JITType::DFGJIT:
         clippedValue = BaselineExecutionCounter::clippedThreshold(jit.codeBlock()->globalObject(), targetValue);
         break;
     case JITType::FTLJIT:
         clippedValue = UpperTierExecutionCounter::clippedThreshold(jit.codeBlock()->globalObject(), targetValue);
         break;
     default:
         RELEASE_ASSERT_NOT_REACHED();
 #if COMPILER_QUIRK(CONSIDERS_UNREACHABLE_CODE)
         clippedValue = 0; // Make some compilers, and mhahnenberg, happy.
 #endif
         break;
     }
     jit.store32(AssemblyHelpers::TrustedImm32(-clippedValue), AssemblyHelpers::Address(GPRInfo::regT0, CodeBlock::offsetOfJITExecuteCounter()));
     jit.store32(AssemblyHelpers::TrustedImm32(activeThreshold), AssemblyHelpers::Address(GPRInfo::regT0, CodeBlock::offsetOfJITExecutionActiveThreshold()));
     jit.store32(AssemblyHelpers::TrustedImm32(formattedTotalExecutionCount(clippedValue)), AssemblyHelpers::Address(GPRInfo::regT0, CodeBlock::offsetOfJITExecutionTotalCount()));

     doneAdjusting.link(&jit);
 }

 void* callerReturnPC(CodeBlock* baselineCodeBlockForCaller, BytecodeIndex callBytecodeIndex, InlineCallFrame::Kind trueCallerCallKind, bool& callerIsLLInt)
 {
     callerIsLLInt = Options::forceOSRExitToLLInt() || baselineCodeBlockForCaller->jitType() == JITType::InterpreterThunk;

     void* jumpTarget;

     if (callerIsLLInt) {
         const Instruction& callInstruction = *baselineCodeBlockForCaller->instructions().at(callBytecodeIndex).ptr();
 #define LLINT_RETURN_LOCATION(name) (callInstruction.isWide16() ? LLInt::getWide16CodePtr<NoPtrTag>(name##_return_location) : (callInstruction.isWide32() ? LLInt::getWide32CodePtr<NoPtrTag>(name##_return_location) : LLInt::getCodePtr<NoPtrTag>(name##_return_location))).executableAddress()

         switch (trueCallerCallKind) {
         case InlineCallFrame::Call:
             jumpTarget = LLINT_RETURN_LOCATION(op_call);
             break;
         case InlineCallFrame::Construct:
             jumpTarget = LLINT_RETURN_LOCATION(op_construct);
             break;
         case InlineCallFrame::CallVarargs:
             jumpTarget = LLINT_RETURN_LOCATION(op_call_varargs_slow);
             break;
         case InlineCallFrame::ConstructVarargs:
             jumpTarget = LLINT_RETURN_LOCATION(op_construct_varargs_slow);
             break;
         case InlineCallFrame::GetterCall: {
             if (callInstruction.opcodeID() == op_get_by_id)
                 jumpTarget = LLINT_RETURN_LOCATION(op_get_by_id);
             else if (callInstruction.opcodeID() == op_get_by_val)
                 jumpTarget = LLINT_RETURN_LOCATION(op_get_by_val);
             else
                 RELEASE_ASSERT_NOT_REACHED();
             break;
         }
         case InlineCallFrame::SetterCall: {
             if (callInstruction.opcodeID() == op_put_by_id)
                 jumpTarget = LLINT_RETURN_LOCATION(op_put_by_id);
             else if (callInstruction.opcodeID() == op_put_by_val)
                 jumpTarget = LLINT_RETURN_LOCATION(op_put_by_val);
             else
                 RELEASE_ASSERT_NOT_REACHED();
             break;
         }
         default:
             RELEASE_ASSERT_NOT_REACHED();
         }

 #undef LLINT_RETURN_LOCATION

     } else {
         switch (trueCallerCallKind) {
         case InlineCallFrame::Call:
         case InlineCallFrame::Construct:
         case InlineCallFrame::CallVarargs:
         case InlineCallFrame::ConstructVarargs: {
             CallLinkInfo* callLinkInfo =
                 baselineCodeBlockForCaller->getCallLinkInfoForBytecodeIndex(callBytecodeIndex);
             RELEASE_ASSERT(callLinkInfo);

             jumpTarget = callLinkInfo->callReturnLocation().untaggedExecutableAddress();
             break;
         }

         case InlineCallFrame::GetterCall:
         case InlineCallFrame::SetterCall: {
             StructureStubInfo* stubInfo =
                 baselineCodeBlockForCaller->findStubInfo(CodeOrigin(callBytecodeIndex));
             RELEASE_ASSERT(stubInfo);

             jumpTarget = stubInfo->doneLocation().untaggedExecutableAddress();
             break;
         }

         default:
             RELEASE_ASSERT_NOT_REACHED();
         }
     }

     return jumpTarget;
 }

 CCallHelpers::Address calleeSaveSlot(InlineCallFrame* inlineCallFrame, CodeBlock* baselineCodeBlock, GPRReg calleeSave)
 {
     const RegisterAtOffsetList* calleeSaves = baselineCodeBlock->calleeSaveRegisters();
     for (unsigned i = 0; i < calleeSaves->size(); i++) {
         RegisterAtOffset entry = calleeSaves->at(i);
         if (entry.reg() != calleeSave)
             continue;
         return CCallHelpers::Address(CCallHelpers::framePointerRegister, static_cast<VirtualRegister>(inlineCallFrame->stackOffset).offsetInBytes() + entry.offset());
     }

     RELEASE_ASSERT_NOT_REACHED();
     return CCallHelpers::Address(CCallHelpers::framePointerRegister);
 }

 void reifyInlinedCallFrames(CCallHelpers& jit, const OSRExitBase& exit)
 {
     // FIXME: We shouldn't leave holes on the stack when performing an OSR exit
     // in presence of inlined tail calls.
     // https://bugs.webkit.org/show_bug.cgi?id=147511
     ASSERT(JITCode::isBaselineCode(jit.baselineCodeBlock()->jitType()));
     jit.storePtr(AssemblyHelpers::TrustedImmPtr(jit.baselineCodeBlock()), AssemblyHelpers::addressFor((VirtualRegister)CallFrameSlot::codeBlock));

     const CodeOrigin* codeOrigin;
     for (codeOrigin = &exit.m_codeOrigin; codeOrigin && codeOrigin->inlineCallFrame(); codeOrigin = codeOrigin->inlineCallFrame()->getCallerSkippingTailCalls()) {
         InlineCallFrame* inlineCallFrame = codeOrigin->inlineCallFrame();
         CodeBlock* baselineCodeBlock = jit.baselineCodeBlockFor(*codeOrigin);
         InlineCallFrame::Kind trueCallerCallKind;
         CodeOrigin* trueCaller = inlineCallFrame->getCallerSkippingTailCalls(&trueCallerCallKind);
         GPRReg callerFrameGPR = GPRInfo::callFrameRegister;

         bool callerIsLLInt = false;

         if (!trueCaller) {
             ASSERT(inlineCallFrame->isTail());
             jit.loadPtr(AssemblyHelpers::Address(GPRInfo::callFrameRegister, CallFrame::returnPCOffset()), GPRInfo::regT3);
 #if CPU(ARM64E)
             jit.addPtr(AssemblyHelpers::TrustedImm32(sizeof(CallerFrameAndPC)), GPRInfo::callFrameRegister, GPRInfo::regT2);
             jit.untagPtr(GPRInfo::regT2, GPRInfo::regT3);
             jit.addPtr(AssemblyHelpers::TrustedImm32(inlineCallFrame->returnPCOffset() + sizeof(void*)), GPRInfo::callFrameRegister, GPRInfo::regT2);
             jit.tagPtr(GPRInfo::regT2, GPRInfo::regT3);
 #endif
             jit.storePtr(GPRInfo::regT3, AssemblyHelpers::addressForByteOffset(inlineCallFrame->returnPCOffset()));
             jit.loadPtr(AssemblyHelpers::Address(GPRInfo::callFrameRegister, CallFrame::callerFrameOffset()), GPRInfo::regT3);
             callerFrameGPR = GPRInfo::regT3;
         } else {
             CodeBlock* baselineCodeBlockForCaller = jit.baselineCodeBlockFor(*trueCaller);
             auto callBytecodeIndex = trueCaller->bytecodeIndex();
             void* jumpTarget = callerReturnPC(baselineCodeBlockForCaller, callBytecodeIndex, trueCallerCallKind, callerIsLLInt);

             if (trueCaller->inlineCallFrame()) {
                 jit.addPtr(
                     AssemblyHelpers::TrustedImm32(trueCaller->inlineCallFrame()->stackOffset * sizeof(EncodedJSValue)),
                     GPRInfo::callFrameRegister,
                     GPRInfo::regT3);
                 callerFrameGPR = GPRInfo::regT3;
             }

 #if CPU(ARM64E)
             jit.addPtr(AssemblyHelpers::TrustedImm32(inlineCallFrame->returnPCOffset() + sizeof(void*)), GPRInfo::callFrameRegister, GPRInfo::regT2);
             jit.move(AssemblyHelpers::TrustedImmPtr(jumpTarget), GPRInfo::nonArgGPR0);
             jit.tagPtr(GPRInfo::regT2, GPRInfo::nonArgGPR0);
             jit.storePtr(GPRInfo::nonArgGPR0, AssemblyHelpers::addressForByteOffset(inlineCallFrame->returnPCOffset()));
 #else
             jit.storePtr(AssemblyHelpers::TrustedImmPtr(jumpTarget), AssemblyHelpers::addressForByteOffset(inlineCallFrame->returnPCOffset()));
 #endif
         }

         jit.storePtr(AssemblyHelpers::TrustedImmPtr(baselineCodeBlock), AssemblyHelpers::addressFor((VirtualRegister)(inlineCallFrame->stackOffset + CallFrameSlot::codeBlock)));

         // Restore the inline call frame's callee save registers.
         // If this inlined frame is a tail call that will return back to the original caller, we need to
         // copy the prior contents of the tag registers already saved for the outer frame to this frame.
         jit.emitSaveOrCopyCalleeSavesFor(
             baselineCodeBlock,
             static_cast<VirtualRegister>(inlineCallFrame->stackOffset),
             trueCaller ? AssemblyHelpers::UseExistingTagRegisterContents : AssemblyHelpers::CopyBaselineCalleeSavedRegistersFromBaseFrame,
             GPRInfo::regT2);

         if (callerIsLLInt) {
             CodeBlock* baselineCodeBlockForCaller = jit.baselineCodeBlockFor(*trueCaller);
             jit.storePtr(CCallHelpers::TrustedImmPtr(baselineCodeBlockForCaller->metadataTable()), calleeSaveSlot(inlineCallFrame, baselineCodeBlock, LLInt::Registers::metadataTableGPR));
 #if USE(JSVALUE64)
             jit.storePtr(CCallHelpers::TrustedImmPtr(baselineCodeBlockForCaller->instructionsRawPointer()), calleeSaveSlot(inlineCallFrame, baselineCodeBlock, LLInt::Registers::pbGPR));
 #endif
         }

         if (!inlineCallFrame->isVarargs())
             jit.store32(AssemblyHelpers::TrustedImm32(inlineCallFrame->argumentCountIncludingThis), AssemblyHelpers::payloadFor((VirtualRegister)(inlineCallFrame->stackOffset + CallFrameSlot::argumentCount)));
 #if USE(JSVALUE64)
         jit.storePtr(callerFrameGPR, AssemblyHelpers::addressForByteOffset(inlineCallFrame->callerFrameOffset()));
         uint32_t locationBits = CallSiteIndex(codeOrigin->bytecodeIndex()).bits();
         jit.store32(AssemblyHelpers::TrustedImm32(locationBits), AssemblyHelpers::tagFor((VirtualRegister)(inlineCallFrame->stackOffset + CallFrameSlot::argumentCount)));
         if (!inlineCallFrame->isClosureCall)
             jit.store64(AssemblyHelpers::TrustedImm64(JSValue::encode(JSValue(inlineCallFrame->calleeConstant()))), AssemblyHelpers::addressFor((VirtualRegister)(inlineCallFrame->stackOffset + CallFrameSlot::callee)));
 #else // USE(JSVALUE64) // so this is the 32-bit part
         jit.storePtr(callerFrameGPR, AssemblyHelpers::addressForByteOffset(inlineCallFrame->callerFrameOffset()));
         const Instruction* instruction = baselineCodeBlock->instructions().at(codeOrigin->bytecodeIndex()).ptr();
         uint32_t locationBits = CallSiteIndex(BytecodeIndex(bitwise_cast<uint32_t>(instruction))).bits();
         jit.store32(AssemblyHelpers::TrustedImm32(locationBits), AssemblyHelpers::tagFor((VirtualRegister)(inlineCallFrame->stackOffset + CallFrameSlot::argumentCount)));
         jit.store32(AssemblyHelpers::TrustedImm32(JSValue::CellTag), AssemblyHelpers::tagFor((VirtualRegister)(inlineCallFrame->stackOffset + CallFrameSlot::callee)));
         if (!inlineCallFrame->isClosureCall)
             jit.storePtr(AssemblyHelpers::TrustedImmPtr(inlineCallFrame->calleeConstant()), AssemblyHelpers::payloadFor((VirtualRegister)(inlineCallFrame->stackOffset + CallFrameSlot::callee)));
 #endif // USE(JSVALUE64) // ending the #else part, so directly above is the 32-bit part
     }

     // Don't need to set the toplevel code origin if we only did inline tail calls
     if (codeOrigin) {
 #if USE(JSVALUE64)
         uint32_t locationBits = CallSiteIndex(codeOrigin->bytecodeIndex()).bits();
 #else
         const Instruction* instruction = jit.baselineCodeBlock()->instructions().at(codeOrigin->bytecodeIndex()).ptr();
         uint32_t locationBits = CallSiteIndex(BytecodeIndex(bitwise_cast<uint32_t>(instruction))).bits();
 #endif
         jit.store32(AssemblyHelpers::TrustedImm32(locationBits), AssemblyHelpers::tagFor((VirtualRegister)(CallFrameSlot::argumentCount)));
     }
 }

 static void osrWriteBarrier(VM& vm, CCallHelpers& jit, GPRReg owner, GPRReg scratch)
 {
     AssemblyHelpers::Jump ownerIsRememberedOrInEden = jit.barrierBranchWithoutFence(owner);

     jit.setupArguments<decltype(operationOSRWriteBarrier)>(&vm, owner);
     jit.prepareCallOperation(vm);
     jit.move(MacroAssembler::TrustedImmPtr(tagCFunctionPtr<OperationPtrTag>(operationOSRWriteBarrier)), scratch);
     jit.call(scratch, OperationPtrTag);

     ownerIsRememberedOrInEden.link(&jit);
 }

 void adjustAndJumpToTarget(VM& vm, CCallHelpers& jit, const OSRExitBase& exit)
 {
     jit.memoryFence();

     jit.move(
         AssemblyHelpers::TrustedImmPtr(
             jit.codeBlock()->baselineAlternative()), GPRInfo::argumentGPR1);
     osrWriteBarrier(vm, jit, GPRInfo::argumentGPR1, GPRInfo::nonArgGPR0);

     // We barrier all inlined frames -- and not just the current inline stack --
     // because we don't know which inlined function owns the value profile that
     // we'll update when we exit. In the case of "f() { a(); b(); }", if both
     // a and b are inlined, we might exit inside b due to a bad value loaded
     // from a.
     // FIXME: MethodOfGettingAValueProfile should remember which CodeBlock owns
     // the value profile.
     InlineCallFrameSet* inlineCallFrames = jit.codeBlock()->jitCode()->dfgCommon()->inlineCallFrames.get();
     if (inlineCallFrames) {
         for (InlineCallFrame* inlineCallFrame : *inlineCallFrames) {
             jit.move(
                 AssemblyHelpers::TrustedImmPtr(
                     inlineCallFrame->baselineCodeBlock.get()), GPRInfo::argumentGPR1);
             osrWriteBarrier(vm, jit, GPRInfo::argumentGPR1, GPRInfo::nonArgGPR0);
         }
     }

     auto* exitInlineCallFrame = exit.m_codeOrigin.inlineCallFrame();
     if (exitInlineCallFrame)
         jit.addPtr(AssemblyHelpers::TrustedImm32(exitInlineCallFrame->stackOffset * sizeof(EncodedJSValue)), GPRInfo::callFrameRegister);

     CodeBlock* codeBlockForExit = jit.baselineCodeBlockFor(exit.m_codeOrigin);
     ASSERT(codeBlockForExit == codeBlockForExit->baselineVersion());
     ASSERT(JITCode::isBaselineCode(codeBlockForExit->jitType()));

     void* jumpTarget;
     bool exitToLLInt = Options::forceOSRExitToLLInt() || codeBlockForExit->jitType() == JITType::InterpreterThunk;
     if (exitToLLInt) {
         auto bytecodeIndex = exit.m_codeOrigin.bytecodeIndex();
         const Instruction& currentInstruction = *codeBlockForExit->instructions().at(bytecodeIndex).ptr();
         MacroAssemblerCodePtr<JSEntryPtrTag> destination = LLInt::getCodePtr<JSEntryPtrTag>(currentInstruction);

         if (exit.isExceptionHandler()) {
             jit.move(CCallHelpers::TrustedImmPtr(&currentInstruction), GPRInfo::regT2);
             jit.storePtr(GPRInfo::regT2, &vm.targetInterpreterPCForThrow);
         }

         jit.move(CCallHelpers::TrustedImmPtr(codeBlockForExit->metadataTable()), LLInt::Registers::metadataTableGPR);
 #if USE(JSVALUE64)
         jit.move(CCallHelpers::TrustedImmPtr(codeBlockForExit->instructionsRawPointer()), LLInt::Registers::pbGPR);
         jit.move(CCallHelpers::TrustedImm32(bytecodeIndex.offset()), LLInt::Registers::pcGPR);
 #else
         jit.move(CCallHelpers::TrustedImmPtr(&currentInstruction), LLInt::Registers::pcGPR);
 #endif
         jumpTarget = destination.retagged<OSRExitPtrTag>().executableAddress();
     } else {
         CodeLocationLabel<JSEntryPtrTag> codeLocation = codeBlockForExit->jitCodeMap().find(exit.m_codeOrigin.bytecodeIndex());
         ASSERT(codeLocation);

         jumpTarget = codeLocation.retagged<OSRExitPtrTag>().executableAddress();
     }

     jit.addPtr(AssemblyHelpers::TrustedImm32(JIT::stackPointerOffsetFor(codeBlockForExit) * sizeof(Register)), GPRInfo::callFrameRegister, AssemblyHelpers::stackPointerRegister);
     if (exit.isExceptionHandler()) {
         // Since we're jumping to op_catch, we need to set callFrameForCatch.
         jit.storePtr(GPRInfo::callFrameRegister, vm.addressOfCallFrameForCatch());
     }

     jit.move(AssemblyHelpers::TrustedImmPtr(jumpTarget), GPRInfo::regT2);
     jit.farJump(GPRInfo::regT2, OSRExitPtrTag);
 }

 } } // namespace JSC::DFG

 #endif // ENABLE(DFG_JIT)
	/*
	* Copyright (C) 2013-2019 Apple Inc. All rights reserved.
	*
	* Redistribution and use in source and binary forms, with or without
	* modification, are permitted provided that the following conditions
	* are met:
	* 1. Redistributions of source code must retain the above copyright
	* notice, this list of conditions and the following disclaimer.
	* 2. Redistributions in binary form must reproduce the above copyright
	* notice, this list of conditions and the following disclaimer in the
	* documentation and/or other materials provided with the distribution.
	*
	* THIS SOFTWARE IS PROVIDED BY APPLE INC. ``AS IS'' AND ANY
	* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
	* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
	* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL APPLE INC. OR
	* CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
	* EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
	* PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
	* PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY
	* OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
	* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
	* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
	*/

	#include "config.h"
	#include "DFGOSRExitCompilerCommon.h"

	#if ENABLE(DFG_JIT)

	#include "Bytecodes.h"
	#include "DFGJITCode.h"
	#include "DFGOperations.h"
	#include "JIT.h"
	#include "JSCJSValueInlines.h"
	#include "JSCInlines.h"
	#include "LLIntData.h"
	#include "StructureStubInfo.h"

	namespace JSC { namespace DFG {

	void handleExitCounts(VM& vm, CCallHelpers& jit, const OSRExitBase& exit)
	{
	if (!exitKindMayJettison(exit.m_kind)) {
	// FIXME: We may want to notice that we're frequently exiting
	// at an op_catch that we didn't compile an entrypoint for, and
	// then trigger a reoptimization of this CodeBlock:
	// https://bugs.webkit.org/show_bug.cgi?id=175842
	return;
	}

	jit.add32(AssemblyHelpers::TrustedImm32(1), AssemblyHelpers::AbsoluteAddress(&exit.m_count));

	jit.move(AssemblyHelpers::TrustedImmPtr(jit.codeBlock()), GPRInfo::regT3);

	AssemblyHelpers::Jump tooFewFails;

	jit.load32(AssemblyHelpers::Address(GPRInfo::regT3, CodeBlock::offsetOfOSRExitCounter()), GPRInfo::regT2);
	jit.add32(AssemblyHelpers::TrustedImm32(1), GPRInfo::regT2);
	jit.store32(GPRInfo::regT2, AssemblyHelpers::Address(GPRInfo::regT3, CodeBlock::offsetOfOSRExitCounter()));

	jit.move(AssemblyHelpers::TrustedImmPtr(jit.baselineCodeBlock()), GPRInfo::regT0);
	AssemblyHelpers::Jump reoptimizeNow = jit.branch32(
	AssemblyHelpers::GreaterThanOrEqual,
	AssemblyHelpers::Address(GPRInfo::regT0, CodeBlock::offsetOfJITExecuteCounter()),
	AssemblyHelpers::TrustedImm32(0));

	// We want to figure out if there's a possibility that we're in a loop. For the outermost
	// code block in the inline stack, we handle this appropriately by having the loop OSR trigger
	// check the exit count of the replacement of the CodeBlock from which we are OSRing. The
	// problem is the inlined functions, which might also have loops, but whose baseline versions
	// don't know where to look for the exit count. Figure out if those loops are severe enough
	// that we had tried to OSR enter. If so, then we should use the loop reoptimization trigger.
	// Otherwise, we should use the normal reoptimization trigger.

	AssemblyHelpers::JumpList loopThreshold;

	for (InlineCallFrame* inlineCallFrame = exit.m_codeOrigin.inlineCallFrame(); inlineCallFrame; inlineCallFrame = inlineCallFrame->directCaller.inlineCallFrame()) {
	loopThreshold.append(
	jit.branchTest8(
	AssemblyHelpers::NonZero,
	AssemblyHelpers::AbsoluteAddress(
	inlineCallFrame->baselineCodeBlock->ownerExecutable()->addressOfDidTryToEnterInLoop())));
	}

	jit.move(
	AssemblyHelpers::TrustedImm32(jit.codeBlock()->exitCountThresholdForReoptimization()),
	GPRInfo::regT1);

	if (!loopThreshold.empty()) {
	AssemblyHelpers::Jump done = jit.jump();

	loopThreshold.link(&jit);
	jit.move(
	AssemblyHelpers::TrustedImm32(
	jit.codeBlock()->exitCountThresholdForReoptimizationFromLoop()),
	GPRInfo::regT1);

	done.link(&jit);
	}

	tooFewFails = jit.branch32(AssemblyHelpers::BelowOrEqual, GPRInfo::regT2, GPRInfo::regT1);

	reoptimizeNow.link(&jit);

	jit.setupArguments<decltype(operationTriggerReoptimizationNow)>(GPRInfo::regT0, GPRInfo::regT3, AssemblyHelpers::TrustedImmPtr(&exit));
	jit.prepareCallOperation(vm);
	jit.move(AssemblyHelpers::TrustedImmPtr(tagCFunctionPtr<OperationPtrTag>(operationTriggerReoptimizationNow)), GPRInfo::nonArgGPR0);
	jit.call(GPRInfo::nonArgGPR0, OperationPtrTag);
	AssemblyHelpers::Jump doneAdjusting = jit.jump();

	tooFewFails.link(&jit);

	// Adjust the execution counter such that the target is to only optimize after a while.
	int32_t activeThreshold =
	jit.baselineCodeBlock()->adjustedCounterValue(
	Options::thresholdForOptimizeAfterLongWarmUp());
	int32_t targetValue = applyMemoryUsageHeuristicsAndConvertToInt(
	activeThreshold, jit.baselineCodeBlock());
	int32_t clippedValue;
	switch (jit.codeBlock()->jitType()) {
	case JITType::DFGJIT:
	clippedValue = BaselineExecutionCounter::clippedThreshold(jit.codeBlock()->globalObject(), targetValue);
	break;
	case JITType::FTLJIT:
	clippedValue = UpperTierExecutionCounter::clippedThreshold(jit.codeBlock()->globalObject(), targetValue);
	break;
	default:
	RELEASE_ASSERT_NOT_REACHED();
	#if COMPILER_QUIRK(CONSIDERS_UNREACHABLE_CODE)
	clippedValue = 0; // Make some compilers, and mhahnenberg, happy.
	#endif
	break;
	}
	jit.store32(AssemblyHelpers::TrustedImm32(-clippedValue), AssemblyHelpers::Address(GPRInfo::regT0, CodeBlock::offsetOfJITExecuteCounter()));
	jit.store32(AssemblyHelpers::TrustedImm32(activeThreshold), AssemblyHelpers::Address(GPRInfo::regT0, CodeBlock::offsetOfJITExecutionActiveThreshold()));
	jit.store32(AssemblyHelpers::TrustedImm32(formattedTotalExecutionCount(clippedValue)), AssemblyHelpers::Address(GPRInfo::regT0, CodeBlock::offsetOfJITExecutionTotalCount()));

	doneAdjusting.link(&jit);
	}

	void* callerReturnPC(CodeBlock* baselineCodeBlockForCaller, BytecodeIndex callBytecodeIndex, InlineCallFrame::Kind trueCallerCallKind, bool& callerIsLLInt)
	{
	callerIsLLInt = Options::forceOSRExitToLLInt() \|\| baselineCodeBlockForCaller->jitType() == JITType::InterpreterThunk;

	void* jumpTarget;

	if (callerIsLLInt) {
	const Instruction& callInstruction = *baselineCodeBlockForCaller->instructions().at(callBytecodeIndex).ptr();
	#define LLINT_RETURN_LOCATION(name) (callInstruction.isWide16() ? LLInt::getWide16CodePtr<NoPtrTag>(name##_return_location) : (callInstruction.isWide32() ? LLInt::getWide32CodePtr<NoPtrTag>(name##_return_location) : LLInt::getCodePtr<NoPtrTag>(name##_return_location))).executableAddress()

	switch (trueCallerCallKind) {
	case InlineCallFrame::Call:
	jumpTarget = LLINT_RETURN_LOCATION(op_call);
	break;
	case InlineCallFrame::Construct:
	jumpTarget = LLINT_RETURN_LOCATION(op_construct);
	break;
	case InlineCallFrame::CallVarargs:
	jumpTarget = LLINT_RETURN_LOCATION(op_call_varargs_slow);
	break;
	case InlineCallFrame::ConstructVarargs:
	jumpTarget = LLINT_RETURN_LOCATION(op_construct_varargs_slow);
	break;
	case InlineCallFrame::GetterCall: {
	if (callInstruction.opcodeID() == op_get_by_id)
	jumpTarget = LLINT_RETURN_LOCATION(op_get_by_id);
	else if (callInstruction.opcodeID() == op_get_by_val)
	jumpTarget = LLINT_RETURN_LOCATION(op_get_by_val);
	else
	RELEASE_ASSERT_NOT_REACHED();
	break;
	}
	case InlineCallFrame::SetterCall: {
	if (callInstruction.opcodeID() == op_put_by_id)
	jumpTarget = LLINT_RETURN_LOCATION(op_put_by_id);
	else if (callInstruction.opcodeID() == op_put_by_val)
	jumpTarget = LLINT_RETURN_LOCATION(op_put_by_val);
	else
	RELEASE_ASSERT_NOT_REACHED();
	break;
	}
	default:
	RELEASE_ASSERT_NOT_REACHED();
	}

	#undef LLINT_RETURN_LOCATION

	} else {
	switch (trueCallerCallKind) {
	case InlineCallFrame::Call:
	case InlineCallFrame::Construct:
	case InlineCallFrame::CallVarargs:
	case InlineCallFrame::ConstructVarargs: {
	CallLinkInfo* callLinkInfo =
	baselineCodeBlockForCaller->getCallLinkInfoForBytecodeIndex(callBytecodeIndex);
	RELEASE_ASSERT(callLinkInfo);

	jumpTarget = callLinkInfo->callReturnLocation().untaggedExecutableAddress();
	break;
	}

	case InlineCallFrame::GetterCall:
	case InlineCallFrame::SetterCall: {
	StructureStubInfo* stubInfo =
	baselineCodeBlockForCaller->findStubInfo(CodeOrigin(callBytecodeIndex));
	RELEASE_ASSERT(stubInfo);

	jumpTarget = stubInfo->doneLocation().untaggedExecutableAddress();
	break;
	}

	default:
	RELEASE_ASSERT_NOT_REACHED();
	}
	}

	return jumpTarget;
	}

	CCallHelpers::Address calleeSaveSlot(InlineCallFrame* inlineCallFrame, CodeBlock* baselineCodeBlock, GPRReg calleeSave)
	{
	const RegisterAtOffsetList* calleeSaves = baselineCodeBlock->calleeSaveRegisters();
	for (unsigned i = 0; i < calleeSaves->size(); i++) {
	RegisterAtOffset entry = calleeSaves->at(i);
	if (entry.reg() != calleeSave)
	continue;
	return CCallHelpers::Address(CCallHelpers::framePointerRegister, static_cast<VirtualRegister>(inlineCallFrame->stackOffset).offsetInBytes() + entry.offset());
	}

	RELEASE_ASSERT_NOT_REACHED();
	return CCallHelpers::Address(CCallHelpers::framePointerRegister);
	}

	void reifyInlinedCallFrames(CCallHelpers& jit, const OSRExitBase& exit)
	{
	// FIXME: We shouldn't leave holes on the stack when performing an OSR exit
	// in presence of inlined tail calls.
	// https://bugs.webkit.org/show_bug.cgi?id=147511
	ASSERT(JITCode::isBaselineCode(jit.baselineCodeBlock()->jitType()));
	jit.storePtr(AssemblyHelpers::TrustedImmPtr(jit.baselineCodeBlock()), AssemblyHelpers::addressFor((VirtualRegister)CallFrameSlot::codeBlock));

	const CodeOrigin* codeOrigin;
	for (codeOrigin = &exit.m_codeOrigin; codeOrigin && codeOrigin->inlineCallFrame(); codeOrigin = codeOrigin->inlineCallFrame()->getCallerSkippingTailCalls()) {
	InlineCallFrame* inlineCallFrame = codeOrigin->inlineCallFrame();
	CodeBlock* baselineCodeBlock = jit.baselineCodeBlockFor(*codeOrigin);
	InlineCallFrame::Kind trueCallerCallKind;
	CodeOrigin* trueCaller = inlineCallFrame->getCallerSkippingTailCalls(&trueCallerCallKind);
	GPRReg callerFrameGPR = GPRInfo::callFrameRegister;

	bool callerIsLLInt = false;

	if (!trueCaller) {
	ASSERT(inlineCallFrame->isTail());
	jit.loadPtr(AssemblyHelpers::Address(GPRInfo::callFrameRegister, CallFrame::returnPCOffset()), GPRInfo::regT3);
	#if CPU(ARM64E)
	jit.addPtr(AssemblyHelpers::TrustedImm32(sizeof(CallerFrameAndPC)), GPRInfo::callFrameRegister, GPRInfo::regT2);
	jit.untagPtr(GPRInfo::regT2, GPRInfo::regT3);
	jit.addPtr(AssemblyHelpers::TrustedImm32(inlineCallFrame->returnPCOffset() + sizeof(void*)), GPRInfo::callFrameRegister, GPRInfo::regT2);
	jit.tagPtr(GPRInfo::regT2, GPRInfo::regT3);
	#endif
	jit.storePtr(GPRInfo::regT3, AssemblyHelpers::addressForByteOffset(inlineCallFrame->returnPCOffset()));
	jit.loadPtr(AssemblyHelpers::Address(GPRInfo::callFrameRegister, CallFrame::callerFrameOffset()), GPRInfo::regT3);
	callerFrameGPR = GPRInfo::regT3;
	} else {
	CodeBlock* baselineCodeBlockForCaller = jit.baselineCodeBlockFor(*trueCaller);
	auto callBytecodeIndex = trueCaller->bytecodeIndex();
	void* jumpTarget = callerReturnPC(baselineCodeBlockForCaller, callBytecodeIndex, trueCallerCallKind, callerIsLLInt);

	if (trueCaller->inlineCallFrame()) {
	jit.addPtr(
	AssemblyHelpers::TrustedImm32(trueCaller->inlineCallFrame()->stackOffset * sizeof(EncodedJSValue)),
	GPRInfo::callFrameRegister,
	GPRInfo::regT3);
	callerFrameGPR = GPRInfo::regT3;
	}

	#if CPU(ARM64E)
	jit.addPtr(AssemblyHelpers::TrustedImm32(inlineCallFrame->returnPCOffset() + sizeof(void*)), GPRInfo::callFrameRegister, GPRInfo::regT2);
	jit.move(AssemblyHelpers::TrustedImmPtr(jumpTarget), GPRInfo::nonArgGPR0);
	jit.tagPtr(GPRInfo::regT2, GPRInfo::nonArgGPR0);
	jit.storePtr(GPRInfo::nonArgGPR0, AssemblyHelpers::addressForByteOffset(inlineCallFrame->returnPCOffset()));
	#else
	jit.storePtr(AssemblyHelpers::TrustedImmPtr(jumpTarget), AssemblyHelpers::addressForByteOffset(inlineCallFrame->returnPCOffset()));
	#endif
	}

	jit.storePtr(AssemblyHelpers::TrustedImmPtr(baselineCodeBlock), AssemblyHelpers::addressFor((VirtualRegister)(inlineCallFrame->stackOffset + CallFrameSlot::codeBlock)));

	// Restore the inline call frame's callee save registers.
	// If this inlined frame is a tail call that will return back to the original caller, we need to
	// copy the prior contents of the tag registers already saved for the outer frame to this frame.
	jit.emitSaveOrCopyCalleeSavesFor(
	baselineCodeBlock,
	static_cast<VirtualRegister>(inlineCallFrame->stackOffset),
	trueCaller ? AssemblyHelpers::UseExistingTagRegisterContents : AssemblyHelpers::CopyBaselineCalleeSavedRegistersFromBaseFrame,
	GPRInfo::regT2);

	if (callerIsLLInt) {
	CodeBlock* baselineCodeBlockForCaller = jit.baselineCodeBlockFor(*trueCaller);
	jit.storePtr(CCallHelpers::TrustedImmPtr(baselineCodeBlockForCaller->metadataTable()), calleeSaveSlot(inlineCallFrame, baselineCodeBlock, LLInt::Registers::metadataTableGPR));
	#if USE(JSVALUE64)
	jit.storePtr(CCallHelpers::TrustedImmPtr(baselineCodeBlockForCaller->instructionsRawPointer()), calleeSaveSlot(inlineCallFrame, baselineCodeBlock, LLInt::Registers::pbGPR));
	#endif
	}

	if (!inlineCallFrame->isVarargs())
	jit.store32(AssemblyHelpers::TrustedImm32(inlineCallFrame->argumentCountIncludingThis), AssemblyHelpers::payloadFor((VirtualRegister)(inlineCallFrame->stackOffset + CallFrameSlot::argumentCount)));
	#if USE(JSVALUE64)
	jit.storePtr(callerFrameGPR, AssemblyHelpers::addressForByteOffset(inlineCallFrame->callerFrameOffset()));
	uint32_t locationBits = CallSiteIndex(codeOrigin->bytecodeIndex()).bits();
	jit.store32(AssemblyHelpers::TrustedImm32(locationBits), AssemblyHelpers::tagFor((VirtualRegister)(inlineCallFrame->stackOffset + CallFrameSlot::argumentCount)));
	if (!inlineCallFrame->isClosureCall)
	jit.store64(AssemblyHelpers::TrustedImm64(JSValue::encode(JSValue(inlineCallFrame->calleeConstant()))), AssemblyHelpers::addressFor((VirtualRegister)(inlineCallFrame->stackOffset + CallFrameSlot::callee)));
	#else // USE(JSVALUE64) // so this is the 32-bit part
	jit.storePtr(callerFrameGPR, AssemblyHelpers::addressForByteOffset(inlineCallFrame->callerFrameOffset()));
	const Instruction* instruction = baselineCodeBlock->instructions().at(codeOrigin->bytecodeIndex()).ptr();
	uint32_t locationBits = CallSiteIndex(BytecodeIndex(bitwise_cast<uint32_t>(instruction))).bits();
	jit.store32(AssemblyHelpers::TrustedImm32(locationBits), AssemblyHelpers::tagFor((VirtualRegister)(inlineCallFrame->stackOffset + CallFrameSlot::argumentCount)));
	jit.store32(AssemblyHelpers::TrustedImm32(JSValue::CellTag), AssemblyHelpers::tagFor((VirtualRegister)(inlineCallFrame->stackOffset + CallFrameSlot::callee)));
	if (!inlineCallFrame->isClosureCall)
	jit.storePtr(AssemblyHelpers::TrustedImmPtr(inlineCallFrame->calleeConstant()), AssemblyHelpers::payloadFor((VirtualRegister)(inlineCallFrame->stackOffset + CallFrameSlot::callee)));
	#endif // USE(JSVALUE64) // ending the #else part, so directly above is the 32-bit part
	}

	// Don't need to set the toplevel code origin if we only did inline tail calls
	if (codeOrigin) {
	#if USE(JSVALUE64)
	uint32_t locationBits = CallSiteIndex(codeOrigin->bytecodeIndex()).bits();
	#else
	const Instruction* instruction = jit.baselineCodeBlock()->instructions().at(codeOrigin->bytecodeIndex()).ptr();
	uint32_t locationBits = CallSiteIndex(BytecodeIndex(bitwise_cast<uint32_t>(instruction))).bits();
	#endif
	jit.store32(AssemblyHelpers::TrustedImm32(locationBits), AssemblyHelpers::tagFor((VirtualRegister)(CallFrameSlot::argumentCount)));
	}
	}

	static void osrWriteBarrier(VM& vm, CCallHelpers& jit, GPRReg owner, GPRReg scratch)
	{
	AssemblyHelpers::Jump ownerIsRememberedOrInEden = jit.barrierBranchWithoutFence(owner);

	jit.setupArguments<decltype(operationOSRWriteBarrier)>(&vm, owner);
	jit.prepareCallOperation(vm);
	jit.move(MacroAssembler::TrustedImmPtr(tagCFunctionPtr<OperationPtrTag>(operationOSRWriteBarrier)), scratch);
	jit.call(scratch, OperationPtrTag);

	ownerIsRememberedOrInEden.link(&jit);
	}

	void adjustAndJumpToTarget(VM& vm, CCallHelpers& jit, const OSRExitBase& exit)
	{
	jit.memoryFence();

	jit.move(
	AssemblyHelpers::TrustedImmPtr(
	jit.codeBlock()->baselineAlternative()), GPRInfo::argumentGPR1);
	osrWriteBarrier(vm, jit, GPRInfo::argumentGPR1, GPRInfo::nonArgGPR0);

	// We barrier all inlined frames -- and not just the current inline stack --
	// because we don't know which inlined function owns the value profile that
	// we'll update when we exit. In the case of "f() { a(); b(); }", if both
	// a and b are inlined, we might exit inside b due to a bad value loaded
	// from a.
	// FIXME: MethodOfGettingAValueProfile should remember which CodeBlock owns
	// the value profile.
	InlineCallFrameSet* inlineCallFrames = jit.codeBlock()->jitCode()->dfgCommon()->inlineCallFrames.get();
	if (inlineCallFrames) {
	for (InlineCallFrame* inlineCallFrame : *inlineCallFrames) {
	jit.move(
	AssemblyHelpers::TrustedImmPtr(
	inlineCallFrame->baselineCodeBlock.get()), GPRInfo::argumentGPR1);
	osrWriteBarrier(vm, jit, GPRInfo::argumentGPR1, GPRInfo::nonArgGPR0);
	}
	}

	auto* exitInlineCallFrame = exit.m_codeOrigin.inlineCallFrame();
	if (exitInlineCallFrame)
	jit.addPtr(AssemblyHelpers::TrustedImm32(exitInlineCallFrame->stackOffset * sizeof(EncodedJSValue)), GPRInfo::callFrameRegister);

	CodeBlock* codeBlockForExit = jit.baselineCodeBlockFor(exit.m_codeOrigin);
	ASSERT(codeBlockForExit == codeBlockForExit->baselineVersion());
	ASSERT(JITCode::isBaselineCode(codeBlockForExit->jitType()));

	void* jumpTarget;
	bool exitToLLInt = Options::forceOSRExitToLLInt() \|\| codeBlockForExit->jitType() == JITType::InterpreterThunk;
	if (exitToLLInt) {
	auto bytecodeIndex = exit.m_codeOrigin.bytecodeIndex();
	const Instruction& currentInstruction = *codeBlockForExit->instructions().at(bytecodeIndex).ptr();
	MacroAssemblerCodePtr<JSEntryPtrTag> destination = LLInt::getCodePtr<JSEntryPtrTag>(currentInstruction);

	if (exit.isExceptionHandler()) {
	jit.move(CCallHelpers::TrustedImmPtr(&currentInstruction), GPRInfo::regT2);
	jit.storePtr(GPRInfo::regT2, &vm.targetInterpreterPCForThrow);
	}

	jit.move(CCallHelpers::TrustedImmPtr(codeBlockForExit->metadataTable()), LLInt::Registers::metadataTableGPR);
	#if USE(JSVALUE64)
	jit.move(CCallHelpers::TrustedImmPtr(codeBlockForExit->instructionsRawPointer()), LLInt::Registers::pbGPR);
	jit.move(CCallHelpers::TrustedImm32(bytecodeIndex.offset()), LLInt::Registers::pcGPR);
	#else
	jit.move(CCallHelpers::TrustedImmPtr(&currentInstruction), LLInt::Registers::pcGPR);
	#endif
	jumpTarget = destination.retagged<OSRExitPtrTag>().executableAddress();
	} else {
	CodeLocationLabel<JSEntryPtrTag> codeLocation = codeBlockForExit->jitCodeMap().find(exit.m_codeOrigin.bytecodeIndex());
	ASSERT(codeLocation);

	jumpTarget = codeLocation.retagged<OSRExitPtrTag>().executableAddress();
	}

	jit.addPtr(AssemblyHelpers::TrustedImm32(JIT::stackPointerOffsetFor(codeBlockForExit) * sizeof(Register)), GPRInfo::callFrameRegister, AssemblyHelpers::stackPointerRegister);
	if (exit.isExceptionHandler()) {
	// Since we're jumping to op_catch, we need to set callFrameForCatch.
	jit.storePtr(GPRInfo::callFrameRegister, vm.addressOfCallFrameForCatch());
	}

	jit.move(AssemblyHelpers::TrustedImmPtr(jumpTarget), GPRInfo::regT2);
	jit.farJump(GPRInfo::regT2, OSRExitPtrTag);
	}

	} } // namespace JSC::DFG

	#endif // ENABLE(DFG_JIT)