Tools/Scripts/webkitpy/pylintrc - WebKit - Git at Google

 # Copyright (c) 2012 Google Inc. All rights reserved.
 #
 # Redistribution and use in source and binary forms, with or without
 # modification, are permitted provided that the following conditions are
 # met:
 #
 #     * Redistributions of source code must retain the above copyright
 # notice, this list of conditions and the following disclaimer.
 #     * Redistributions in binary form must reproduce the above
 # copyright notice, this list of conditions and the following disclaimer
 # in the documentation and/or other materials provided with the
 # distribution.
 #     * Neither the name of Google Inc. nor the names of its
 # contributors may be used to endorse or promote products derived from
 # this software without specific prior written permission.
 #
 # THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
 # "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
 # LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
 # A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
 # OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
 # SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
 # LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
 # DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
 # THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
 # (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
 # OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

 [MASTER]

 # Specify a configuration file.
 #rcfile=

 # Python code to execute, usually for sys.path manipulation such as
 # pygtk.require().
 #init-hook=

 # Profiled execution.
 profile=no

 # Add files or directories to the blocklist. They should be base names, not
 # paths.
 ignore=CVS

 # Pickle collected data for later comparisons.
 persistent=yes

 # List of plugins (as comma separated values of python modules names) to load,
 # usually to register additional checkers.
 load-plugins=


 [MESSAGES CONTROL]

 # Enable the message, report, category or checker with the given id(s). You can
 # either give multiple identifier separated by comma (,) or put this option
 # multiple time.
 #enable=

 # Disable the message, report, category or checker with the given id(s). You
 # can either give multiple identifier separated by comma (,) or put this option
 # multiple time (only on the command line, not in the configuration file where
 # it should appear only once).
 # CHANGED:
 # C0103: Invalid name ""
 # C0111: Missing docstring
 # C0301: Line too long
 # C0302: Too many lines in module (N)
 # I0010: Unable to consider inline option ''
 # I0011: Locally disabling WNNNN
 #
 # R0201: Method could be a function
 # R0801: Similar lines in N files
 # R0901: Too many ancestors (8/7)
 # R0902: Too many instance attributes (N/7)
 # R0903: Too few public methods (N/2)
 # R0904: Too many public methods (N/20)
 # R0911: Too many return statements (N/6)
 # R0912: Too many branches (N/12)
 # R0913: Too many arguments (N/5)
 # R0914: Too many local variables (N/15)
 # R0915: Too many statements (N/50)
 # R0921: Abstract class not referenced
 # R0922: Abstract class is only referenced 1 times
 # W0122: Use of the exec statement
 # W0141: Used builtin function ''
 # W0212: Access to a protected member X of a client class
 # W0142: Used * or ** magic
 # W0401: Wildcard import X
 # W0402: Uses of a deprecated module 'string'
 # W0404: 41: Reimport 'XX' (imported line NN)
 # W0511: TODO
 # W0603: Using the global statement
 # W0614: Unused import X from wildcard import
 # W0703: Catch "Exception"
 # W1201: Specify string format arguments as logging function parameters
 disable=C0103,C0111,C0301,C0302,I0010,I0011,R0201,R0801,R0901,R0902,R0903,R0904,R0911,R0912,R0913,R0914,R0915,R0921,R0922,W0122,W0141,W0142,W0212,W0401,W0402,W0404,W0511,W0603,W0614,W0703,W1201


 [REPORTS]

 # Set the output format. Available formats are text, parseable, colorized, msvs
 # (visual studio) and html
 output-format=text

 # Include message's id in output
 include-ids=yes

 # Put messages in a separate file for each module / package specified on the
 # command line instead of printing them on stdout. Reports (if any) will be
 # written in a file name "pylint_global.[txt|html]".
 files-output=no

 # Tells whether to display a full report or only the messages
 # CHANGED:
 reports=no

 # Python expression which should return a note less than 10 (10 is the highest
 # note). You have access to the variables errors warning, statement which
 # respectively contain the number of errors / warnings messages and the total
 # number of statements analyzed. This is used by the global evaluation report
 # (RP0004).
 evaluation=10.0 - ((float(5 * error + warning + refactor + convention) / statement) * 10)

 # Add a comment according to your evaluation note. This is used by the global
 # evaluation report (RP0004).
 comment=no


 [VARIABLES]

 # Tells whether we should check for unused import in __init__ files.
 init-import=no

 # A regular expression matching the beginning of the name of dummy variables
 # (i.e. not used).
 dummy-variables-rgx=_|dummy

 # List of additional names supposed to be defined in builtins. Remember that
 # you should avoid to define new builtins when possible.
 additional-builtins=


 [TYPECHECK]

 # Tells whether missing members accessed in mixin class should be ignored. A
 # mixin class is detected if its name ends with "mixin" (case insensitive).
 ignore-mixin-members=yes

 # List of classes names for which member attributes should not be checked
 # (useful for classes with attributes dynamically set).
 ignored-classes=SQLObject,twisted.internet.reactor,hashlib,google.appengine.api.memcache

 # When zope mode is activated, add a predefined set of Zope acquired attributes
 # to generated-members.
 zope=no

 # List of members which are set dynamically and missed by pylint inference
 # system, and so shouldn't trigger E0201 when accessed. Python regular
 # expressions are accepted.
 generated-members=REQUEST,acl_users,aq_parent


 [MISCELLANEOUS]

 # List of note tags to take in consideration, separated by a comma.
 notes=FIXME,XXX,TODO


 [SIMILARITIES]

 # Minimum lines number of a similarity.
 min-similarity-lines=4

 # Ignore comments when computing similarities.
 ignore-comments=yes

 # Ignore docstrings when computing similarities.
 ignore-docstrings=yes


 [FORMAT]

 # Maximum number of characters on a single line.
 max-line-length=200

 # Maximum number of lines in a module
 max-module-lines=1000

 # String used as indentation unit. This is usually " " (4 spaces) or "\t" (1
 # tab).
 # CHANGED:
 indent-string='    '


 [BASIC]

 # Required attributes for module, separated by a comma
 required-attributes=

 # List of builtins function names that should not be used, separated by a comma
 bad-functions=map,filter,apply,input

 # Regular expression which should only match correct module names
 module-rgx=(([a-z_][a-z0-9_]*)|([A-Z][a-zA-Z0-9]+))$

 # Regular expression which should only match correct module level names
 const-rgx=(([A-Z_][A-Z0-9_]*)|(__.*__))$

 # Regular expression which should only match correct class names
 class-rgx=[A-Z_][a-zA-Z0-9]+$

 # Regular expression which should only match correct function names
 function-rgx=[a-z_][a-z0-9_]{2,30}$

 # Regular expression which should only match correct method names
 method-rgx=[a-z_][a-z0-9_]{2,30}$

 # Regular expression which should only match correct instance attribute names
 attr-rgx=[a-z_][a-z0-9_]{2,30}$

 # Regular expression which should only match correct argument names
 argument-rgx=[a-z_][a-z0-9_]{2,30}$

 # Regular expression which should only match correct variable names
 variable-rgx=[a-z_][a-z0-9_]{2,30}$

 # Regular expression which should only match correct list comprehension /
 # generator expression variable names
 inlinevar-rgx=[A-Za-z_][A-Za-z0-9_]*$

 # Good variable names which should always be accepted, separated by a comma
 good-names=i,j,k,ex,Run,_

 # Bad variable names which should always be refused, separated by a comma
 bad-names=foo,bar,baz,toto,tutu,tata

 # Regular expression which should only match functions or classes name which do
 # not require a docstring
 no-docstring-rgx=__.*__


 [DESIGN]

 # Maximum number of arguments for function / method
 max-args=5

 # Argument names that match this expression will be ignored. Default to name
 # with leading underscore
 ignored-argument-names=_.*

 # Maximum number of locals for function / method body
 max-locals=15

 # Maximum number of return / yield for function / method body
 max-returns=6

 # Maximum number of branch for function / method body
 max-branchs=12

 # Maximum number of statements in function / method body
 max-statements=50

 # Maximum number of parents for a class (see R0901).
 max-parents=7

 # Maximum number of attributes for a class (see R0902).
 max-attributes=7

 # Minimum number of public methods for a class (see R0903).
 min-public-methods=2

 # Maximum number of public methods for a class (see R0904).
 max-public-methods=20


 [CLASSES]

 # List of interface methods to ignore, separated by a comma. This is used for
 # instance to not check methods defines in Zope's Interface base class.
 ignore-iface-methods=isImplementedBy,deferred,extends,names,namesAndDescriptions,queryDescriptionFor,getBases,getDescriptionFor,getDoc,getName,getTaggedValue,getTaggedValueTags,isEqualOrExtendedBy,setTaggedValue,isImplementedByInstancesOf,adaptWith,is_implemented_by

 # List of method names used to declare (i.e. assign) instance attributes.
 defining-attr-methods=__init__,__new__,setUp

 # List of valid names for the first argument in a class method.
 valid-classmethod-first-arg=cls


 [IMPORTS]

 # Deprecated modules which should not be used, separated by a comma
 deprecated-modules=regsub,string,TERMIOS,Bastion,rexec

 # Create a graph of every (i.e. internal and external) dependencies in the
 # given file (report RP0402 must not be disabled)
 import-graph=

 # Create a graph of external dependencies in the given file (report RP0402 must
 # not be disabled)
 ext-import-graph=

 # Create a graph of internal dependencies in the given file (report RP0402 must
 # not be disabled)
 int-import-graph=


 [EXCEPTIONS]

 # Exceptions that will emit a warning when being caught. Defaults to
 # "Exception"
 overgeneral-exceptions=Exception
	# Copyright (c) 2012 Google Inc. All rights reserved.
	#
	# Redistribution and use in source and binary forms, with or without
	# modification, are permitted provided that the following conditions are
	# met:
	#
	# * Redistributions of source code must retain the above copyright
	# notice, this list of conditions and the following disclaimer.
	# * Redistributions in binary form must reproduce the above
	# copyright notice, this list of conditions and the following disclaimer
	# in the documentation and/or other materials provided with the
	# distribution.
	# * Neither the name of Google Inc. nor the names of its
	# contributors may be used to endorse or promote products derived from
	# this software without specific prior written permission.
	#
	# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
	# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
	# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
	# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
	# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
	# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
	# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
	# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
	# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
	# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
	# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

	[MASTER]

	# Specify a configuration file.
	#rcfile=

	# Python code to execute, usually for sys.path manipulation such as
	# pygtk.require().
	#init-hook=

	# Profiled execution.
	profile=no

	# Add files or directories to the blocklist. They should be base names, not
	# paths.
	ignore=CVS

	# Pickle collected data for later comparisons.
	persistent=yes

	# List of plugins (as comma separated values of python modules names) to load,
	# usually to register additional checkers.
	load-plugins=


	[MESSAGES CONTROL]

	# Enable the message, report, category or checker with the given id(s). You can
	# either give multiple identifier separated by comma (,) or put this option
	# multiple time.
	#enable=

	# Disable the message, report, category or checker with the given id(s). You
	# can either give multiple identifier separated by comma (,) or put this option
	# multiple time (only on the command line, not in the configuration file where
	# it should appear only once).
	# CHANGED:
	# C0103: Invalid name ""
	# C0111: Missing docstring
	# C0301: Line too long
	# C0302: Too many lines in module (N)
	# I0010: Unable to consider inline option ''
	# I0011: Locally disabling WNNNN
	#
	# R0201: Method could be a function
	# R0801: Similar lines in N files
	# R0901: Too many ancestors (8/7)
	# R0902: Too many instance attributes (N/7)
	# R0903: Too few public methods (N/2)
	# R0904: Too many public methods (N/20)
	# R0911: Too many return statements (N/6)
	# R0912: Too many branches (N/12)
	# R0913: Too many arguments (N/5)
	# R0914: Too many local variables (N/15)
	# R0915: Too many statements (N/50)
	# R0921: Abstract class not referenced
	# R0922: Abstract class is only referenced 1 times
	# W0122: Use of the exec statement
	# W0141: Used builtin function ''
	# W0212: Access to a protected member X of a client class
	# W0142: Used * or ** magic
	# W0401: Wildcard import X
	# W0402: Uses of a deprecated module 'string'
	# W0404: 41: Reimport 'XX' (imported line NN)
	# W0511: TODO
	# W0603: Using the global statement
	# W0614: Unused import X from wildcard import
	# W0703: Catch "Exception"
	# W1201: Specify string format arguments as logging function parameters
	disable=C0103,C0111,C0301,C0302,I0010,I0011,R0201,R0801,R0901,R0902,R0903,R0904,R0911,R0912,R0913,R0914,R0915,R0921,R0922,W0122,W0141,W0142,W0212,W0401,W0402,W0404,W0511,W0603,W0614,W0703,W1201


	[REPORTS]

	# Set the output format. Available formats are text, parseable, colorized, msvs
	# (visual studio) and html
	output-format=text

	# Include message's id in output
	include-ids=yes

	# Put messages in a separate file for each module / package specified on the
	# command line instead of printing them on stdout. Reports (if any) will be
	# written in a file name "pylint_global.[txt\|html]".
	files-output=no

	# Tells whether to display a full report or only the messages
	# CHANGED:
	reports=no

	# Python expression which should return a note less than 10 (10 is the highest
	# note). You have access to the variables errors warning, statement which
	# respectively contain the number of errors / warnings messages and the total
	# number of statements analyzed. This is used by the global evaluation report
	# (RP0004).
	evaluation=10.0 - ((float(5 * error + warning + refactor + convention) / statement) * 10)

	# Add a comment according to your evaluation note. This is used by the global
	# evaluation report (RP0004).
	comment=no


	[VARIABLES]

	# Tells whether we should check for unused import in __init__ files.
	init-import=no

	# A regular expression matching the beginning of the name of dummy variables
	# (i.e. not used).
	dummy-variables-rgx=_\|dummy

	# List of additional names supposed to be defined in builtins. Remember that
	# you should avoid to define new builtins when possible.
	additional-builtins=


	[TYPECHECK]

	# Tells whether missing members accessed in mixin class should be ignored. A
	# mixin class is detected if its name ends with "mixin" (case insensitive).
	ignore-mixin-members=yes

	# List of classes names for which member attributes should not be checked
	# (useful for classes with attributes dynamically set).
	ignored-classes=SQLObject,twisted.internet.reactor,hashlib,google.appengine.api.memcache

	# When zope mode is activated, add a predefined set of Zope acquired attributes
	# to generated-members.
	zope=no

	# List of members which are set dynamically and missed by pylint inference
	# system, and so shouldn't trigger E0201 when accessed. Python regular
	# expressions are accepted.
	generated-members=REQUEST,acl_users,aq_parent


	[MISCELLANEOUS]

	# List of note tags to take in consideration, separated by a comma.
	notes=FIXME,XXX,TODO


	[SIMILARITIES]

	# Minimum lines number of a similarity.
	min-similarity-lines=4

	# Ignore comments when computing similarities.
	ignore-comments=yes

	# Ignore docstrings when computing similarities.
	ignore-docstrings=yes


	[FORMAT]

	# Maximum number of characters on a single line.
	max-line-length=200

	# Maximum number of lines in a module
	max-module-lines=1000

	# String used as indentation unit. This is usually " " (4 spaces) or "\t" (1
	# tab).
	# CHANGED:
	indent-string=' '


	[BASIC]

	# Required attributes for module, separated by a comma
	required-attributes=

	# List of builtins function names that should not be used, separated by a comma
	bad-functions=map,filter,apply,input

	# Regular expression which should only match correct module names
	module-rgx=(([a-z_][a-z0-9_]*)\|([A-Z][a-zA-Z0-9]+))$

	# Regular expression which should only match correct module level names
	const-rgx=(([A-Z_][A-Z0-9_])\|(__.__))$

	# Regular expression which should only match correct class names
	class-rgx=[A-Z_][a-zA-Z0-9]+$

	# Regular expression which should only match correct function names
	function-rgx=[a-z_][a-z0-9_]{2,30}$

	# Regular expression which should only match correct method names
	method-rgx=[a-z_][a-z0-9_]{2,30}$

	# Regular expression which should only match correct instance attribute names
	attr-rgx=[a-z_][a-z0-9_]{2,30}$

	# Regular expression which should only match correct argument names
	argument-rgx=[a-z_][a-z0-9_]{2,30}$

	# Regular expression which should only match correct variable names
	variable-rgx=[a-z_][a-z0-9_]{2,30}$

	# Regular expression which should only match correct list comprehension /
	# generator expression variable names
	inlinevar-rgx=[A-Za-z_][A-Za-z0-9_]*$

	# Good variable names which should always be accepted, separated by a comma
	good-names=i,j,k,ex,Run,_

	# Bad variable names which should always be refused, separated by a comma
	bad-names=foo,bar,baz,toto,tutu,tata

	# Regular expression which should only match functions or classes name which do
	# not require a docstring
	no-docstring-rgx=__.*__


	[DESIGN]

	# Maximum number of arguments for function / method
	max-args=5

	# Argument names that match this expression will be ignored. Default to name
	# with leading underscore
	ignored-argument-names=_.*

	# Maximum number of locals for function / method body
	max-locals=15

	# Maximum number of return / yield for function / method body
	max-returns=6

	# Maximum number of branch for function / method body
	max-branchs=12

	# Maximum number of statements in function / method body
	max-statements=50

	# Maximum number of parents for a class (see R0901).
	max-parents=7

	# Maximum number of attributes for a class (see R0902).
	max-attributes=7

	# Minimum number of public methods for a class (see R0903).
	min-public-methods=2

	# Maximum number of public methods for a class (see R0904).
	max-public-methods=20


	[CLASSES]

	# List of interface methods to ignore, separated by a comma. This is used for
	# instance to not check methods defines in Zope's Interface base class.
	ignore-iface-methods=isImplementedBy,deferred,extends,names,namesAndDescriptions,queryDescriptionFor,getBases,getDescriptionFor,getDoc,getName,getTaggedValue,getTaggedValueTags,isEqualOrExtendedBy,setTaggedValue,isImplementedByInstancesOf,adaptWith,is_implemented_by

	# List of method names used to declare (i.e. assign) instance attributes.
	defining-attr-methods=__init__,__new__,setUp

	# List of valid names for the first argument in a class method.
	valid-classmethod-first-arg=cls


	[IMPORTS]

	# Deprecated modules which should not be used, separated by a comma
	deprecated-modules=regsub,string,TERMIOS,Bastion,rexec

	# Create a graph of every (i.e. internal and external) dependencies in the
	# given file (report RP0402 must not be disabled)
	import-graph=

	# Create a graph of external dependencies in the given file (report RP0402 must
	# not be disabled)
	ext-import-graph=

	# Create a graph of internal dependencies in the given file (report RP0402 must
	# not be disabled)
	int-import-graph=


	[EXCEPTIONS]

	# Exceptions that will emit a warning when being caught. Defaults to
	# "Exception"
	overgeneral-exceptions=Exception