| /* |
| * Copyright (C) 2015-2019 Apple Inc. All rights reserved. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions |
| * are met: |
| * 1. Redistributions of source code must retain the above copyright |
| * notice, this list of conditions and the following disclaimer. |
| * 2. Redistributions in binary form must reproduce the above copyright |
| * notice, this list of conditions and the following disclaimer in the |
| * documentation and/or other materials provided with the distribution. |
| * |
| * THIS SOFTWARE IS PROVIDED BY APPLE INC. ``AS IS'' AND ANY |
| * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE |
| * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR |
| * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL APPLE INC. OR |
| * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, |
| * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, |
| * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR |
| * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY |
| * OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT |
| * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE |
| * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| */ |
| |
| #include "config.h" |
| #include "testb3.h" |
| |
| #if ENABLE(B3_JIT) |
| |
| void test42() |
| { |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| Value* const42 = root->appendNew<Const32Value>(proc, Origin(), 42); |
| root->appendNewControlValue(proc, Return, Origin(), const42); |
| |
| CHECK(compileAndRun<int>(proc) == 42); |
| } |
| |
| void testLoad42() |
| { |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| int x = 42; |
| root->appendNewControlValue( |
| proc, Return, Origin(), |
| root->appendNew<MemoryValue>( |
| proc, Load, Int32, Origin(), |
| root->appendNew<ConstPtrValue>(proc, Origin(), &x))); |
| |
| CHECK(compileAndRun<int>(proc) == 42); |
| } |
| |
| void testLoadAcq42() |
| { |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| int x = 42; |
| root->appendNewControlValue( |
| proc, Return, Origin(), |
| root->appendNew<MemoryValue>( |
| proc, Load, Int32, Origin(), |
| root->appendNew<ConstPtrValue>(proc, Origin(), &x), |
| 0, HeapRange(42), HeapRange(42))); |
| |
| auto code = compileProc(proc); |
| if (isARM64()) |
| checkUsesInstruction(*code, "lda"); |
| CHECK(invoke<int>(*code) == 42); |
| } |
| |
| void testLoadWithOffsetImpl(int32_t offset64, int32_t offset32) |
| { |
| { |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| int64_t x = -42; |
| Value* base = root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR0); |
| root->appendNewControlValue( |
| proc, Return, Origin(), |
| root->appendNew<MemoryValue>( |
| proc, Load, Int64, Origin(), |
| base, |
| offset64)); |
| |
| char* address = reinterpret_cast<char*>(&x) - offset64; |
| CHECK(compileAndRun<int64_t>(proc, address) == -42); |
| } |
| { |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| int32_t x = -42; |
| Value* base = root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR0); |
| root->appendNewControlValue( |
| proc, Return, Origin(), |
| root->appendNew<MemoryValue>( |
| proc, Load, Int32, Origin(), |
| base, |
| offset32)); |
| |
| char* address = reinterpret_cast<char*>(&x) - offset32; |
| CHECK(compileAndRun<int32_t>(proc, address) == -42); |
| } |
| } |
| |
| void testLoadOffsetImm9Max() |
| { |
| testLoadWithOffsetImpl(255, 255); |
| } |
| |
| void testLoadOffsetImm9MaxPlusOne() |
| { |
| testLoadWithOffsetImpl(256, 256); |
| } |
| |
| void testLoadOffsetImm9MaxPlusTwo() |
| { |
| testLoadWithOffsetImpl(257, 257); |
| } |
| |
| void testLoadOffsetImm9Min() |
| { |
| testLoadWithOffsetImpl(-256, -256); |
| } |
| |
| void testLoadOffsetImm9MinMinusOne() |
| { |
| testLoadWithOffsetImpl(-257, -257); |
| } |
| |
| void testLoadOffsetScaledUnsignedImm12Max() |
| { |
| testLoadWithOffsetImpl(32760, 16380); |
| } |
| |
| void testLoadOffsetScaledUnsignedOverImm12Max() |
| { |
| testLoadWithOffsetImpl(32760, 32760); |
| testLoadWithOffsetImpl(32761, 16381); |
| testLoadWithOffsetImpl(32768, 16384); |
| } |
| |
| static void testBitXorTreeArgs(int64_t a, int64_t b) |
| { |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| Value* argA = root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR0); |
| Value* argB = root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR1); |
| Value* node = root->appendNew<Value>(proc, BitXor, Origin(), argA, argB); |
| node = root->appendNew<Value>(proc, BitXor, Origin(), node, argB); |
| node = root->appendNew<Value>(proc, BitXor, Origin(), node, argA); |
| node = root->appendNew<Value>(proc, BitXor, Origin(), node, argB); |
| root->appendNew<Value>(proc, Return, Origin(), node); |
| |
| CHECK_EQ(compileAndRun<int64_t>(proc, a, b), (((a ^ b) ^ b) ^ a) ^ b); |
| } |
| |
| static void testBitXorTreeArgsEven(int64_t a, int64_t b) |
| { |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| Value* argA = root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR0); |
| Value* argB = root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR1); |
| Value* node = root->appendNew<Value>(proc, BitXor, Origin(), argA, argB); |
| node = root->appendNew<Value>(proc, BitXor, Origin(), node, argB); |
| node = root->appendNew<Value>(proc, BitXor, Origin(), node, argA); |
| root->appendNew<Value>(proc, Return, Origin(), node); |
| |
| CHECK_EQ(compileAndRun<int64_t>(proc, a, b), ((a ^ b) ^ b) ^ a); |
| } |
| |
| static void testBitXorTreeArgImm(int64_t a, int64_t b) |
| { |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| Value* argA = root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR0); |
| Value* immB = root->appendNew<Const64Value>(proc, Origin(), b); |
| Value* node = root->appendNew<Value>(proc, BitXor, Origin(), argA, immB); |
| node = root->appendNew<Value>(proc, BitXor, Origin(), argA, node); |
| node = root->appendNew<Value>(proc, BitXor, Origin(), argA, node); |
| node = root->appendNew<Value>(proc, BitXor, Origin(), immB, node); |
| root->appendNew<Value>(proc, Return, Origin(), node); |
| |
| CHECK_EQ(compileAndRun<int64_t>(proc, a), b ^ (a ^ (a ^ (a ^ b)))); |
| } |
| |
| void testAddTreeArg32(int32_t a) |
| { |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| Value* argA = root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR0); |
| argA = root->appendNew<Value>(proc, Trunc, Origin(), argA); |
| Value* node = argA; |
| int32_t expectedResult = a; |
| for (unsigned i = 0; i < 20; ++i) { |
| Value* otherNode; |
| if (!(i % 3)) { |
| otherNode = root->appendNew<Const32Value>(proc, Origin(), i); |
| expectedResult += i; |
| } else { |
| otherNode = argA; |
| expectedResult += a; |
| } |
| node = root->appendNew<Value>(proc, Add, Origin(), node, otherNode); |
| } |
| root->appendNew<Value>(proc, Return, Origin(), node); |
| |
| CHECK_EQ(compileAndRun<int32_t>(proc, a), expectedResult); |
| } |
| |
| void testMulTreeArg32(int32_t a) |
| { |
| // Fibonacci-like expression tree with multiplication instead of addition. |
| // Verifies that we don't explode on heavily factored graphs. |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| Value* argA = root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR0); |
| argA = root->appendNew<Value>(proc, Trunc, Origin(), argA); |
| Value* nodeA = argA; |
| Value* nodeB = argA; |
| int32_t expectedA = a, expectedResult = a; |
| for (unsigned i = 0; i < 20; ++i) { |
| Value* newNodeB = root->appendNew<Value>(proc, Mul, Origin(), nodeA, nodeB); |
| nodeA = nodeB; |
| nodeB = newNodeB; |
| int32_t newExpectedResult = expectedA * expectedResult; |
| expectedA = expectedResult; |
| expectedResult = newExpectedResult; |
| } |
| root->appendNew<Value>(proc, Return, Origin(), nodeB); |
| |
| CHECK_EQ(compileAndRun<int32_t>(proc, a), expectedResult); |
| } |
| |
| static void testBitAndTreeArg32(int32_t a) |
| { |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| Value* argA = root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR0); |
| argA = root->appendNew<Value>(proc, Trunc, Origin(), argA); |
| Value* node = argA; |
| for (unsigned i = 0; i < 8; ++i) { |
| Value* constI = root->appendNew<Const32Value>(proc, Origin(), i | 42); |
| Value* newBitAnd = root->appendNew<Value>(proc, BitAnd, Origin(), argA, constI); |
| node = root->appendNew<Value>(proc, BitAnd, Origin(), node, newBitAnd); |
| } |
| root->appendNew<Value>(proc, Return, Origin(), node); |
| |
| CHECK_EQ(compileAndRun<int32_t>(proc, a), a & 42); |
| } |
| |
| static void testBitOrTreeArg32(int32_t a) |
| { |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| Value* argA = root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR0); |
| argA = root->appendNew<Value>(proc, Trunc, Origin(), argA); |
| Value* node = argA; |
| for (unsigned i = 0; i < 8; ++i) { |
| Value* constI = root->appendNew<Const32Value>(proc, Origin(), i); |
| Value* newBitAnd = root->appendNew<Value>(proc, BitOr, Origin(), argA, constI); |
| node = root->appendNew<Value>(proc, BitOr, Origin(), node, newBitAnd); |
| } |
| root->appendNew<Value>(proc, Return, Origin(), node); |
| |
| CHECK_EQ(compileAndRun<int32_t>(proc, a), a | 7); |
| } |
| |
| void testArg(int argument) |
| { |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| root->appendNewControlValue( |
| proc, Return, Origin(), |
| root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR0)); |
| |
| CHECK(compileAndRun<int>(proc, argument) == argument); |
| } |
| |
| void testReturnConst64(int64_t value) |
| { |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| root->appendNewControlValue( |
| proc, Return, Origin(), |
| root->appendNew<Const64Value>(proc, Origin(), value)); |
| |
| CHECK(compileAndRun<int64_t>(proc) == value); |
| } |
| |
| void testReturnVoid() |
| { |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| root->appendNewControlValue(proc, Return, Origin()); |
| compileAndRun<void>(proc); |
| } |
| |
| void testLoadZeroExtendIndexAddress() |
| { |
| if (Options::defaultB3OptLevel() < 2) |
| return; |
| |
| auto test32 = [&] (uint32_t index, int32_t num, int32_t amount) { |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| |
| Value* baseValue = root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR0); |
| Value* index32 = root->appendNew<Value>( |
| proc, Trunc, Origin(), |
| root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR1)); |
| Value* index64 = root->appendNew<Value>(proc, ZExt32, Origin(), index32); |
| Value* scale = root->appendNew<Const32Value>(proc, Origin(), amount); |
| Value* address = root->appendNew<Value>( |
| proc, Add, Origin(), baseValue, |
| root->appendNew<Value>(proc, Shl, Origin(), index64, scale)); |
| |
| root->appendNew<Value>( |
| proc, Return, Origin(), |
| root->appendNew<MemoryValue>(proc, Load, Int32, Origin(), address)); |
| |
| auto code = compileProc(proc); |
| if (isARM64()) { |
| std::string regex(amount == 2 ? ".*ldr.*uxtw#2.*" : ".*ldr.*[.*,.*].*"); |
| checkUsesInstruction(*code, regex.c_str(), true); |
| } |
| intptr_t addr = bitwise_cast<intptr_t>(&num); |
| intptr_t base = addr - (static_cast<intptr_t>(index) << static_cast<intptr_t>(amount)); |
| CHECK_EQ(invoke<int32_t>(*code, base, index), num); |
| }; |
| |
| for (auto index : int32Operands()) { |
| for (auto num : int32Operands()) { |
| for (int32_t amount = 0; amount < 10; ++amount) |
| test32(index.value, num.value, amount); |
| } |
| } |
| |
| auto test64 = [&] (uint32_t index, int64_t num, int32_t amount) { |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| |
| Value* baseValue = root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR0); |
| Value* index32 = root->appendNew<Value>( |
| proc, Trunc, Origin(), |
| root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR1)); |
| Value* index64 = root->appendNew<Value>(proc, ZExt32, Origin(), index32); |
| Value* scale = root->appendNew<Const32Value>(proc, Origin(), amount); |
| Value* address = root->appendNew<Value>( |
| proc, Add, Origin(), baseValue, |
| root->appendNew<Value>(proc, Shl, Origin(), index64, scale)); |
| |
| root->appendNew<Value>( |
| proc, Return, Origin(), |
| root->appendNew<MemoryValue>(proc, Load, Int64, Origin(), address)); |
| |
| auto code = compileProc(proc); |
| if (isARM64()) { |
| std::string regex(amount == 3 ? ".*ldr.*uxtw#3.*" : ".*ldr.*[.*,.*].*"); |
| checkUsesInstruction(*code, regex.c_str(), true); |
| } |
| intptr_t addr = bitwise_cast<intptr_t>(&num); |
| intptr_t base = addr - (static_cast<intptr_t>(index) << static_cast<intptr_t>(amount)); |
| CHECK_EQ(invoke<int64_t>(*code, base, index), num); |
| }; |
| |
| for (auto index : int32Operands()) { |
| for (auto num : int64Operands()) { |
| for (int32_t amount = 0; amount < 10; ++amount) |
| test64(index.value, num.value, amount); |
| } |
| } |
| } |
| |
| void testLoadSignExtendIndexAddress() |
| { |
| if (Options::defaultB3OptLevel() < 2) |
| return; |
| |
| auto test32 = [&] (int32_t index, int32_t num, int32_t amount) { |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| |
| Value* baseValue = root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR0); |
| Value* index32 = root->appendNew<Value>( |
| proc, Trunc, Origin(), |
| root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR1)); |
| Value* index64 = root->appendNew<Value>(proc, SExt32, Origin(), index32); |
| Value* scale = root->appendNew<Const32Value>(proc, Origin(), amount); |
| Value* address = root->appendNew<Value>( |
| proc, Add, Origin(), baseValue, |
| root->appendNew<Value>(proc, Shl, Origin(), index64, scale)); |
| |
| root->appendNew<Value>( |
| proc, Return, Origin(), |
| root->appendNew<MemoryValue>(proc, Load, Int32, Origin(), address)); |
| |
| auto code = compileProc(proc); |
| if (isARM64()) { |
| std::string regex(amount == 2 ? ".*ldr.*sxtw#2.*" : ".*ldr.*[.*,.*].*"); |
| checkUsesInstruction(*code, regex.c_str(), true); |
| } |
| intptr_t addr = bitwise_cast<intptr_t>(&num); |
| intptr_t base = addr - (static_cast<intptr_t>(index) << static_cast<intptr_t>(amount)); |
| CHECK_EQ(invoke<int32_t>(*code, base, index), num); |
| }; |
| |
| for (auto index : int32Operands()) { |
| for (auto num : int32Operands()) { |
| for (int32_t amount = 0; amount < 10; ++amount) |
| test32(index.value, num.value, amount); |
| } |
| } |
| |
| auto test64 = [&] (int32_t index, int64_t num, int32_t amount) { |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| |
| Value* baseValue = root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR0); |
| Value* index32 = root->appendNew<Value>( |
| proc, Trunc, Origin(), |
| root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR1)); |
| Value* index64 = root->appendNew<Value>(proc, SExt32, Origin(), index32); |
| Value* scale = root->appendNew<Const32Value>(proc, Origin(), amount); |
| Value* address = root->appendNew<Value>( |
| proc, Add, Origin(), baseValue, |
| root->appendNew<Value>(proc, Shl, Origin(), index64, scale)); |
| |
| root->appendNew<Value>( |
| proc, Return, Origin(), |
| root->appendNew<MemoryValue>(proc, Load, Int64, Origin(), address)); |
| |
| auto code = compileProc(proc); |
| if (isARM64()) { |
| std::string regex(amount == 3 ? ".*ldr.*sxtw#3.*" : ".*ldr.*[.*,.*].*"); |
| checkUsesInstruction(*code, regex.c_str(), true); |
| } |
| intptr_t addr = bitwise_cast<intptr_t>(&num); |
| intptr_t base = addr - (static_cast<intptr_t>(index) << static_cast<intptr_t>(amount)); |
| CHECK_EQ(invoke<int64_t>(*code, base, index), num); |
| }; |
| |
| for (auto index : int32Operands()) { |
| for (auto num : int64Operands()) { |
| for (int32_t amount = 0; amount < 10; ++amount) |
| test64(index.value, num.value, amount); |
| } |
| } |
| } |
| |
| void testStoreZeroExtendIndexAddress() |
| { |
| if (Options::defaultB3OptLevel() < 2) |
| return; |
| |
| auto test32 = [&] (uint32_t index, int32_t num, int32_t amount) { |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| |
| Value* value = root->appendNew<Const32Value>(proc, Origin(), num); |
| Value* base = root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR0); |
| Value* index32 = root->appendNew<Value>( |
| proc, Trunc, Origin(), |
| root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR1)); |
| Value* index64 = root->appendNew<Value>(proc, ZExt32, Origin(), index32); |
| Value* scale = root->appendNew<Const32Value>(proc, Origin(), amount); |
| Value* address = root->appendNew<Value>( |
| proc, Add, Origin(), base, |
| root->appendNew<Value>(proc, Shl, Origin(), index64, scale)); |
| |
| root->appendNew<MemoryValue>(proc, Store, Origin(), value, address); |
| root->appendNew<Value>(proc, Return, Origin(), value); |
| |
| auto code = compileProc(proc); |
| if (isARM64()) { |
| std::string regex(amount == 2 ? ".*str.*uxtw#2.*" : ".*str.*[.*,.*].*"); |
| checkUsesInstruction(*code, regex.c_str(), true); |
| } |
| int32_t slot = 12341234; |
| intptr_t addr = bitwise_cast<intptr_t>(&slot); |
| invoke<int32_t>(*code, addr - (static_cast<intptr_t>(index) << static_cast<intptr_t>(amount)), index); |
| CHECK_EQ(slot, num); |
| }; |
| |
| for (auto index : int32Operands()) { |
| for (auto num : int32Operands()) { |
| for (int32_t amount = 0; amount < 10; ++amount) |
| test32(index.value, num.value, amount); |
| } |
| } |
| |
| auto test64 = [&] (uint32_t index, int64_t num, int32_t amount) { |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| |
| Value* value = root->appendNew<Const64Value>(proc, Origin(), num); |
| Value* base = root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR0); |
| Value* index32 = root->appendNew<Value>( |
| proc, Trunc, Origin(), |
| root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR1)); |
| Value* index64 = root->appendNew<Value>(proc, ZExt32, Origin(), index32); |
| Value* scale = root->appendNew<Const32Value>(proc, Origin(), amount); |
| Value* address = root->appendNew<Value>( |
| proc, Add, Origin(), base, |
| root->appendNew<Value>(proc, Shl, Origin(), index64, scale)); |
| |
| root->appendNew<MemoryValue>(proc, Store, Origin(), value, address); |
| root->appendNew<Value>(proc, Return, Origin(), value); |
| |
| auto code = compileProc(proc); |
| if (isARM64() && amount == 3) { |
| std::string regex(amount == 3 ? ".*str.*uxtw#3.*" : ".*str.*[.*,.*].*"); |
| checkUsesInstruction(*code, regex.c_str(), true); |
| } |
| int64_t slot = 12341234; |
| intptr_t addr = bitwise_cast<intptr_t>(&slot); |
| invoke<int64_t>(*code, addr - (static_cast<intptr_t>(index) << static_cast<intptr_t>(amount)), index); |
| CHECK_EQ(slot, num); |
| }; |
| |
| for (auto index : int32Operands()) { |
| for (auto num : int64Operands()) { |
| for (int32_t amount = 0; amount < 10; ++amount) |
| test64(index.value, num.value, amount); |
| } |
| } |
| } |
| |
| void testStoreSignExtendIndexAddress() |
| { |
| if (Options::defaultB3OptLevel() < 2) |
| return; |
| |
| auto test32 = [&] (int32_t index, int32_t num, int32_t amount) { |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| |
| Value* value = root->appendNew<Const32Value>(proc, Origin(), num); |
| Value* base = root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR0); |
| Value* index32 = root->appendNew<Value>( |
| proc, Trunc, Origin(), |
| root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR1)); |
| Value* index64 = root->appendNew<Value>(proc, SExt32, Origin(), index32); |
| Value* scale = root->appendNew<Const32Value>(proc, Origin(), amount); |
| Value* address = root->appendNew<Value>( |
| proc, Add, Origin(), base, |
| root->appendNew<Value>(proc, Shl, Origin(), index64, scale)); |
| |
| root->appendNew<MemoryValue>(proc, Store, Origin(), value, address); |
| root->appendNew<Value>(proc, Return, Origin(), value); |
| |
| auto code = compileProc(proc); |
| if (isARM64()) { |
| std::string regex(amount == 2 ? ".*str.*sxtw#2.*" : ".*str.*[.*,.*].*"); |
| checkUsesInstruction(*code, regex.c_str(), true); |
| } |
| int32_t slot = 12341234; |
| intptr_t addr = bitwise_cast<intptr_t>(&slot); |
| invoke<int32_t>(*code, addr - (static_cast<intptr_t>(index) << static_cast<intptr_t>(amount)), index); |
| CHECK_EQ(slot, num); |
| }; |
| |
| for (auto index : int32Operands()) { |
| for (auto num : int32Operands()) { |
| for (int32_t amount = 0; amount < 10; ++amount) |
| test32(index.value, num.value, amount); |
| } |
| } |
| |
| auto test64 = [&] (int32_t index, int64_t num, int32_t amount) { |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| |
| Value* value = root->appendNew<Const64Value>(proc, Origin(), num); |
| Value* base = root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR0); |
| Value* index32 = root->appendNew<Value>( |
| proc, Trunc, Origin(), |
| root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR1)); |
| Value* index64 = root->appendNew<Value>(proc, SExt32, Origin(), index32); |
| Value* scale = root->appendNew<Const32Value>(proc, Origin(), amount); |
| Value* address = root->appendNew<Value>( |
| proc, Add, Origin(), base, |
| root->appendNew<Value>(proc, Shl, Origin(), index64, scale)); |
| |
| root->appendNew<MemoryValue>(proc, Store, Origin(), value, address); |
| root->appendNew<Value>(proc, Return, Origin(), value); |
| |
| auto code = compileProc(proc); |
| if (isARM64()) { |
| std::string regex(amount == 3 ? ".*str.*sxtw#3.*" : ".*str.*[.*,.*].*"); |
| checkUsesInstruction(*code, regex.c_str(), true); |
| } |
| int64_t slot = 12341234; |
| intptr_t addr = bitwise_cast<intptr_t>(&slot); |
| invoke<int64_t>(*code, addr - (static_cast<intptr_t>(index) << static_cast<intptr_t>(amount)), index); |
| CHECK_EQ(slot, num); |
| }; |
| |
| for (auto index : int32Operands()) { |
| for (auto num : int64Operands()) { |
| for (int32_t amount = 0; amount < 10; ++amount) |
| test64(index.value, num.value, amount); |
| } |
| } |
| } |
| |
| void testAddArg(int a) |
| { |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| Value* value = root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR0); |
| root->appendNewControlValue( |
| proc, Return, Origin(), |
| root->appendNew<Value>(proc, Add, Origin(), value, value)); |
| |
| CHECK(compileAndRun<int>(proc, a) == a + a); |
| } |
| |
| void testAddArgs(int a, int b) |
| { |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| root->appendNewControlValue( |
| proc, Return, Origin(), |
| root->appendNew<Value>( |
| proc, Add, Origin(), |
| root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR0), |
| root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR1))); |
| |
| CHECK(compileAndRun<int>(proc, a, b) == a + b); |
| } |
| |
| void testAddArgImm(int a, int b) |
| { |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| root->appendNewControlValue( |
| proc, Return, Origin(), |
| root->appendNew<Value>( |
| proc, Add, Origin(), |
| root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR0), |
| root->appendNew<Const64Value>(proc, Origin(), b))); |
| |
| CHECK(compileAndRun<int>(proc, a) == a + b); |
| } |
| |
| void testAddImmArg(int a, int b) |
| { |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| root->appendNewControlValue( |
| proc, Return, Origin(), |
| root->appendNew<Value>( |
| proc, Add, Origin(), |
| root->appendNew<Const64Value>(proc, Origin(), a), |
| root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR0))); |
| |
| CHECK(compileAndRun<int>(proc, b) == a + b); |
| } |
| |
| void testAddArgMem(int64_t a, int64_t b) |
| { |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| Value* address = root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR1); |
| MemoryValue* load = root->appendNew<MemoryValue>(proc, Load, Int64, Origin(), address); |
| Value* result = root->appendNew<Value>(proc, Add, Origin(), |
| root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR0), |
| load); |
| root->appendNew<MemoryValue>(proc, Store, Origin(), result, address); |
| root->appendNewControlValue(proc, Return, Origin(), root->appendNew<Const32Value>(proc, Origin(), 0)); |
| |
| int64_t inputOutput = b; |
| CHECK(!compileAndRun<int64_t>(proc, a, &inputOutput)); |
| CHECK(inputOutput == a + b); |
| } |
| |
| void testAddMemArg(int64_t a, int64_t b) |
| { |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| Value* address = root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR0); |
| MemoryValue* load = root->appendNew<MemoryValue>(proc, Load, Int64, Origin(), address); |
| Value* result = root->appendNew<Value>(proc, Add, Origin(), |
| load, |
| root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR1)); |
| root->appendNewControlValue(proc, Return, Origin(), result); |
| |
| CHECK(compileAndRun<int64_t>(proc, &a, b) == a + b); |
| } |
| |
| void testAddImmMem(int64_t a, int64_t b) |
| { |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| Value* address = root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR0); |
| MemoryValue* load = root->appendNew<MemoryValue>(proc, Load, Int64, Origin(), address); |
| Value* result = root->appendNew<Value>(proc, Add, Origin(), |
| root->appendNew<Const64Value>(proc, Origin(), a), |
| load); |
| root->appendNew<MemoryValue>(proc, Store, Origin(), result, address); |
| root->appendNewControlValue(proc, Return, Origin(), root->appendNew<Const32Value>(proc, Origin(), 0)); |
| |
| int64_t inputOutput = b; |
| CHECK(!compileAndRun<int>(proc, &inputOutput)); |
| CHECK(inputOutput == a + b); |
| } |
| |
| void testAddArg32(int a) |
| { |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| Value* value = root->appendNew<Value>(proc, Trunc, Origin(), |
| root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR0)); |
| root->appendNewControlValue( |
| proc, Return, Origin(), |
| root->appendNew<Value>(proc, Add, Origin(), value, value)); |
| |
| CHECK(compileAndRun<int>(proc, a) == a + a); |
| } |
| |
| void testAddArgs32(int a, int b) |
| { |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| root->appendNewControlValue( |
| proc, Return, Origin(), |
| root->appendNew<Value>( |
| proc, Add, Origin(), |
| root->appendNew<Value>( |
| proc, Trunc, Origin(), |
| root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR0)), |
| root->appendNew<Value>( |
| proc, Trunc, Origin(), |
| root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR1)))); |
| |
| CHECK(compileAndRun<int>(proc, a, b) == a + b); |
| } |
| |
| void testAddArgMem32(int32_t a, int32_t b) |
| { |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| Value* address = root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR1); |
| MemoryValue* load = root->appendNew<MemoryValue>(proc, Load, Int32, Origin(), address); |
| Value* argument = root->appendNew<Value>(proc, Trunc, Origin(), |
| root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR0)); |
| Value* result = root->appendNew<Value>(proc, Add, Origin(), argument, load); |
| root->appendNew<MemoryValue>(proc, Store, Origin(), result, address); |
| root->appendNewControlValue(proc, Return, Origin(), root->appendNew<Const32Value>(proc, Origin(), 0)); |
| |
| int32_t inputOutput = b; |
| CHECK(!compileAndRun<int32_t>(proc, a, &inputOutput)); |
| CHECK(inputOutput == a + b); |
| } |
| |
| void testAddMemArg32(int32_t a, int32_t b) |
| { |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| Value* address = root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR0); |
| MemoryValue* load = root->appendNew<MemoryValue>(proc, Load, Int32, Origin(), address); |
| Value* argument = root->appendNew<Value>(proc, Trunc, Origin(), |
| root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR1)); |
| Value* result = root->appendNew<Value>(proc, Add, Origin(), load, argument); |
| root->appendNewControlValue(proc, Return, Origin(), result); |
| |
| CHECK(compileAndRun<int32_t>(proc, &a, b) == a + b); |
| } |
| |
| void testAddImmMem32(int32_t a, int32_t b) |
| { |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| Value* address = root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR0); |
| MemoryValue* load = root->appendNew<MemoryValue>(proc, Load, Int32, Origin(), address); |
| Value* result = root->appendNew<Value>(proc, Add, Origin(), |
| root->appendNew<Const32Value>(proc, Origin(), a), |
| load); |
| root->appendNew<MemoryValue>(proc, Store, Origin(), result, address); |
| root->appendNewControlValue(proc, Return, Origin(), root->appendNew<Const32Value>(proc, Origin(), 0)); |
| |
| int32_t inputOutput = b; |
| CHECK(!compileAndRun<int>(proc, &inputOutput)); |
| CHECK(inputOutput == a + b); |
| } |
| |
| void testAddNeg1(int a, int b) |
| { |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| root->appendNewControlValue( |
| proc, Return, Origin(), |
| root->appendNew<Value>( |
| proc, Add, Origin(), |
| root->appendNew<Value>(proc, Neg, Origin(), |
| root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR0)), |
| root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR1))); |
| |
| CHECK(compileAndRun<int>(proc, a, b) == (- a) + b); |
| } |
| |
| void testAddNeg2(int a, int b) |
| { |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| root->appendNewControlValue( |
| proc, Return, Origin(), |
| root->appendNew<Value>( |
| proc, Add, Origin(), |
| root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR0), |
| root->appendNew<Value>(proc, Neg, Origin(), |
| root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR1)))); |
| |
| CHECK(compileAndRun<int>(proc, a, b) == a + (- b)); |
| } |
| |
| void testAddArgZeroImmZDef() |
| { |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| Value* arg = root->appendNew<Value>( |
| proc, Trunc, Origin(), |
| root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR0)); |
| Value* constZero = root->appendNew<Const32Value>(proc, Origin(), 0); |
| root->appendNewControlValue( |
| proc, Return, Origin(), |
| root->appendNew<Value>( |
| proc, Add, Origin(), |
| arg, |
| constZero)); |
| |
| auto code = compileProc(proc, 0); |
| CHECK(invoke<int64_t>(*code, 0x0123456789abcdef) == 0x89abcdef); |
| } |
| |
| void testAddLoadTwice() |
| { |
| auto test = [&] () { |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| int32_t value = 42; |
| Value* load = root->appendNew<MemoryValue>( |
| proc, Load, Int32, Origin(), |
| root->appendNew<ConstPtrValue>(proc, Origin(), &value)); |
| root->appendNewControlValue( |
| proc, Return, Origin(), |
| root->appendNew<Value>(proc, Add, Origin(), load, load)); |
| |
| auto code = compileProc(proc); |
| CHECK(invoke<int32_t>(*code) == 42 * 2); |
| }; |
| |
| test(); |
| } |
| |
| void testAddArgDouble(double a) |
| { |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| Value* value = root->appendNew<ArgumentRegValue>(proc, Origin(), FPRInfo::argumentFPR0); |
| root->appendNewControlValue( |
| proc, Return, Origin(), |
| root->appendNew<Value>(proc, Add, Origin(), value, value)); |
| |
| CHECK(isIdentical(compileAndRun<double>(proc, a), a + a)); |
| } |
| |
| void testAddArgsDouble(double a, double b) |
| { |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| Value* valueA = root->appendNew<ArgumentRegValue>(proc, Origin(), FPRInfo::argumentFPR0); |
| Value* valueB = root->appendNew<ArgumentRegValue>(proc, Origin(), FPRInfo::argumentFPR1); |
| root->appendNewControlValue( |
| proc, Return, Origin(), |
| root->appendNew<Value>(proc, Add, Origin(), valueA, valueB)); |
| |
| CHECK(isIdentical(compileAndRun<double>(proc, a, b), a + b)); |
| } |
| |
| void testAddArgImmDouble(double a, double b) |
| { |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| Value* valueA = root->appendNew<ArgumentRegValue>(proc, Origin(), FPRInfo::argumentFPR0); |
| Value* valueB = root->appendNew<ConstDoubleValue>(proc, Origin(), b); |
| root->appendNewControlValue( |
| proc, Return, Origin(), |
| root->appendNew<Value>(proc, Add, Origin(), valueA, valueB)); |
| |
| CHECK(isIdentical(compileAndRun<double>(proc, a), a + b)); |
| } |
| |
| void testAddImmArgDouble(double a, double b) |
| { |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| Value* valueA = root->appendNew<ConstDoubleValue>(proc, Origin(), a); |
| Value* valueB = root->appendNew<ArgumentRegValue>(proc, Origin(), FPRInfo::argumentFPR0); |
| root->appendNewControlValue( |
| proc, Return, Origin(), |
| root->appendNew<Value>(proc, Add, Origin(), valueA, valueB)); |
| |
| CHECK(isIdentical(compileAndRun<double>(proc, b), a + b)); |
| } |
| |
| void testAddImmsDouble(double a, double b) |
| { |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| Value* valueA = root->appendNew<ConstDoubleValue>(proc, Origin(), a); |
| Value* valueB = root->appendNew<ConstDoubleValue>(proc, Origin(), b); |
| root->appendNewControlValue( |
| proc, Return, Origin(), |
| root->appendNew<Value>(proc, Add, Origin(), valueA, valueB)); |
| |
| CHECK(isIdentical(compileAndRun<double>(proc), a + b)); |
| } |
| |
| void testAddArgFloat(float a) |
| { |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| Value* argument32 = root->appendNew<Value>(proc, Trunc, Origin(), |
| root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR0)); |
| Value* floatValue = root->appendNew<Value>(proc, BitwiseCast, Origin(), argument32); |
| Value* result = root->appendNew<Value>(proc, Add, Origin(), floatValue, floatValue); |
| Value* result32 = root->appendNew<Value>(proc, BitwiseCast, Origin(), result); |
| root->appendNewControlValue(proc, Return, Origin(), result32); |
| |
| |
| CHECK(isIdentical(compileAndRun<int32_t>(proc, bitwise_cast<int32_t>(a)), bitwise_cast<int32_t>(a + a))); |
| } |
| |
| void testAddArgsFloat(float a, float b) |
| { |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| Value* argument1int32 = root->appendNew<Value>(proc, Trunc, Origin(), |
| root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR0)); |
| Value* argument2int32 = root->appendNew<Value>(proc, Trunc, Origin(), |
| root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR1)); |
| Value* floatValue1 = root->appendNew<Value>(proc, BitwiseCast, Origin(), argument1int32); |
| Value* floatValue2 = root->appendNew<Value>(proc, BitwiseCast, Origin(), argument2int32); |
| Value* result = root->appendNew<Value>(proc, Add, Origin(), floatValue1, floatValue2); |
| Value* result32 = root->appendNew<Value>(proc, BitwiseCast, Origin(), result); |
| root->appendNewControlValue(proc, Return, Origin(), result32); |
| |
| CHECK(isIdentical(compileAndRun<int32_t>(proc, bitwise_cast<int32_t>(a), bitwise_cast<int32_t>(b)), bitwise_cast<int32_t>(a + b))); |
| } |
| |
| void testAddFPRArgsFloat(float a, float b) |
| { |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| Value* argument1 = root->appendNew<Value>(proc, Trunc, Origin(), |
| root->appendNew<ArgumentRegValue>(proc, Origin(), FPRInfo::argumentFPR0)); |
| Value* argument2 = root->appendNew<Value>(proc, Trunc, Origin(), |
| root->appendNew<ArgumentRegValue>(proc, Origin(), FPRInfo::argumentFPR1)); |
| Value* result = root->appendNew<Value>(proc, Add, Origin(), argument1, argument2); |
| root->appendNewControlValue(proc, Return, Origin(), result); |
| |
| CHECK(isIdentical(compileAndRun<float>(proc, a, b), a + b)); |
| } |
| |
| void testAddArgImmFloat(float a, float b) |
| { |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| Value* argument32 = root->appendNew<Value>(proc, Trunc, Origin(), |
| root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR0)); |
| Value* floatValue = root->appendNew<Value>(proc, BitwiseCast, Origin(), argument32); |
| Value* constValue = root->appendNew<ConstFloatValue>(proc, Origin(), b); |
| Value* result = root->appendNew<Value>(proc, Add, Origin(), floatValue, constValue); |
| Value* result32 = root->appendNew<Value>(proc, BitwiseCast, Origin(), result); |
| root->appendNewControlValue(proc, Return, Origin(), result32); |
| |
| CHECK(isIdentical(compileAndRun<int32_t>(proc, bitwise_cast<int32_t>(a)), bitwise_cast<int32_t>(a + b))); |
| } |
| |
| void testAddImmArgFloat(float a, float b) |
| { |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| Value* argument32 = root->appendNew<Value>(proc, Trunc, Origin(), |
| root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR0)); |
| Value* floatValue = root->appendNew<Value>(proc, BitwiseCast, Origin(), argument32); |
| Value* constValue = root->appendNew<ConstFloatValue>(proc, Origin(), a); |
| Value* result = root->appendNew<Value>(proc, Add, Origin(), constValue, floatValue); |
| Value* result32 = root->appendNew<Value>(proc, BitwiseCast, Origin(), result); |
| root->appendNewControlValue(proc, Return, Origin(), result32); |
| |
| CHECK(isIdentical(compileAndRun<int32_t>(proc, bitwise_cast<int32_t>(b)), bitwise_cast<int32_t>(a + b))); |
| } |
| |
| void testAddImmsFloat(float a, float b) |
| { |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| Value* constValue1 = root->appendNew<ConstFloatValue>(proc, Origin(), a); |
| Value* constValue2 = root->appendNew<ConstFloatValue>(proc, Origin(), b); |
| Value* result = root->appendNew<Value>(proc, Add, Origin(), constValue1, constValue2); |
| Value* result32 = root->appendNew<Value>(proc, BitwiseCast, Origin(), result); |
| root->appendNewControlValue(proc, Return, Origin(), result32); |
| |
| CHECK(isIdentical(compileAndRun<int32_t>(proc), bitwise_cast<int32_t>(a + b))); |
| } |
| |
| void testAddArgFloatWithUselessDoubleConversion(float a) |
| { |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| Value* argumentInt32 = root->appendNew<Value>(proc, Trunc, Origin(), |
| root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR0)); |
| Value* floatValue = root->appendNew<Value>(proc, BitwiseCast, Origin(), argumentInt32); |
| Value* asDouble = root->appendNew<Value>(proc, FloatToDouble, Origin(), floatValue); |
| Value* result = root->appendNew<Value>(proc, Add, Origin(), asDouble, asDouble); |
| Value* floatResult = root->appendNew<Value>(proc, DoubleToFloat, Origin(), result); |
| Value* result32 = root->appendNew<Value>(proc, BitwiseCast, Origin(), floatResult); |
| root->appendNewControlValue(proc, Return, Origin(), result32); |
| |
| CHECK(isIdentical(compileAndRun<int32_t>(proc, bitwise_cast<int32_t>(a)), bitwise_cast<int32_t>(a + a))); |
| } |
| |
| void testAddArgsFloatWithUselessDoubleConversion(float a, float b) |
| { |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| Value* argument1int32 = root->appendNew<Value>(proc, Trunc, Origin(), |
| root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR0)); |
| Value* argument2int32 = root->appendNew<Value>(proc, Trunc, Origin(), |
| root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR1)); |
| Value* floatValue1 = root->appendNew<Value>(proc, BitwiseCast, Origin(), argument1int32); |
| Value* floatValue2 = root->appendNew<Value>(proc, BitwiseCast, Origin(), argument2int32); |
| Value* asDouble1 = root->appendNew<Value>(proc, FloatToDouble, Origin(), floatValue1); |
| Value* asDouble2 = root->appendNew<Value>(proc, FloatToDouble, Origin(), floatValue2); |
| Value* result = root->appendNew<Value>(proc, Add, Origin(), asDouble1, asDouble2); |
| Value* floatResult = root->appendNew<Value>(proc, DoubleToFloat, Origin(), result); |
| Value* result32 = root->appendNew<Value>(proc, BitwiseCast, Origin(), floatResult); |
| root->appendNewControlValue(proc, Return, Origin(), result32); |
| |
| CHECK(isIdentical(compileAndRun<int32_t>(proc, bitwise_cast<int32_t>(a), bitwise_cast<int32_t>(b)), bitwise_cast<int32_t>(a + b))); |
| } |
| |
| void testAddArgsFloatWithEffectfulDoubleConversion(float a, float b) |
| { |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| Value* argument1int32 = root->appendNew<Value>(proc, Trunc, Origin(), |
| root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR0)); |
| Value* argument2int32 = root->appendNew<Value>(proc, Trunc, Origin(), |
| root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR1)); |
| Value* floatValue1 = root->appendNew<Value>(proc, BitwiseCast, Origin(), argument1int32); |
| Value* floatValue2 = root->appendNew<Value>(proc, BitwiseCast, Origin(), argument2int32); |
| Value* asDouble1 = root->appendNew<Value>(proc, FloatToDouble, Origin(), floatValue1); |
| Value* asDouble2 = root->appendNew<Value>(proc, FloatToDouble, Origin(), floatValue2); |
| Value* result = root->appendNew<Value>(proc, Add, Origin(), asDouble1, asDouble2); |
| Value* floatResult = root->appendNew<Value>(proc, DoubleToFloat, Origin(), result); |
| Value* doubleAddress = root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR2); |
| root->appendNew<MemoryValue>(proc, Store, Origin(), result, doubleAddress); |
| Value* result32 = root->appendNew<Value>(proc, BitwiseCast, Origin(), floatResult); |
| root->appendNewControlValue(proc, Return, Origin(), result32); |
| |
| double effect = 0; |
| CHECK(isIdentical(compileAndRun<int32_t>(proc, bitwise_cast<int32_t>(a), bitwise_cast<int32_t>(b), &effect), bitwise_cast<int32_t>(a + b))); |
| CHECK(isIdentical(effect, static_cast<double>(a) + static_cast<double>(b))); |
| } |
| |
| void testAddMulMulArgs(int64_t a, int64_t b, int64_t c) |
| { |
| // We want to check every possible ordering of arguments (to properly check every path in B3ReduceStrength): |
| // ((a * b) + (a * c)) |
| // ((a * b) + (c * a)) |
| // ((b * a) + (a * c)) |
| // ((b * a) + (c * a)) |
| for (int i = 0; i < 4; ++i) { |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| Value* argA = root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR0); |
| Value* argB = root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR1); |
| Value* argC = root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR2); |
| Value* mulAB = i & 2 ? root->appendNew<Value>(proc, Mul, Origin(), argA, argB) |
| : root->appendNew<Value>(proc, Mul, Origin(), argB, argA); |
| Value* mulAC = i & 1 ? root->appendNew<Value>(proc, Mul, Origin(), argA, argC) |
| : root->appendNew<Value>(proc, Mul, Origin(), argC, argA); |
| root->appendNew<Value>(proc, Return, Origin(), |
| root->appendNew<Value>(proc, Add, Origin(), |
| mulAB, |
| mulAC)); |
| |
| CHECK_EQ(compileAndRun<int64_t>(proc, a, b, c), ((a * b) + (a * c))); |
| } |
| } |
| |
| void testMulArg(int a) |
| { |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| Value* value = root->appendNew<Value>( |
| proc, Trunc, Origin(), root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR0)); |
| root->appendNewControlValue( |
| proc, Return, Origin(), |
| root->appendNew<Value>(proc, Mul, Origin(), value, value)); |
| |
| CHECK(compileAndRun<int>(proc, a) == a * a); |
| } |
| |
| void testMulArgStore(int a) |
| { |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| |
| int mulSlot; |
| int valueSlot; |
| |
| Value* value = root->appendNew<Value>( |
| proc, Trunc, Origin(), |
| root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR0)); |
| Value* mul = root->appendNew<Value>(proc, Mul, Origin(), value, value); |
| |
| root->appendNew<MemoryValue>( |
| proc, Store, Origin(), value, |
| root->appendNew<ConstPtrValue>(proc, Origin(), &valueSlot), 0); |
| root->appendNew<MemoryValue>( |
| proc, Store, Origin(), mul, |
| root->appendNew<ConstPtrValue>(proc, Origin(), &mulSlot), 0); |
| |
| root->appendNewControlValue( |
| proc, Return, Origin(), root->appendNew<Const32Value>(proc, Origin(), 0)); |
| |
| CHECK(!compileAndRun<int>(proc, a)); |
| CHECK(mulSlot == a * a); |
| CHECK(valueSlot == a); |
| } |
| |
| void testMulAddArg(int a) |
| { |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| Value* value = root->appendNew<Value>( |
| proc, Trunc, Origin(), |
| root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR0)); |
| root->appendNewControlValue( |
| proc, Return, Origin(), |
| root->appendNew<Value>( |
| proc, Add, Origin(), |
| root->appendNew<Value>(proc, Mul, Origin(), value, value), |
| value)); |
| |
| auto code = compileProc(proc); |
| if (isARM64()) |
| checkUsesInstruction(*code, "madd"); |
| CHECK(invoke<int64_t>(*code, a, a, a) == a * a + a); |
| } |
| |
| void testMulArgs(int a, int b) |
| { |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| root->appendNewControlValue( |
| proc, Return, Origin(), |
| root->appendNew<Value>( |
| proc, Mul, Origin(), |
| root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR0), |
| root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR1))); |
| |
| CHECK(compileAndRun<int>(proc, a, b) == a * b); |
| } |
| |
| void testMulArgNegArg(int a, int b) |
| { |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| Value* argA = root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR0); |
| Value* argB = root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR1); |
| Value* negB = root->appendNew<Value>(proc, Neg, Origin(), argB); |
| Value* result = root->appendNew<Value>(proc, Mul, Origin(), argA, negB); |
| root->appendNew<Value>(proc, Return, Origin(), result); |
| |
| CHECK(compileAndRun<int>(proc, a, b) == a * (-b)); |
| } |
| |
| void testMulArgImm(int64_t a, int64_t b) |
| { |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| root->appendNewControlValue( |
| proc, Return, Origin(), |
| root->appendNew<Value>( |
| proc, Mul, Origin(), |
| root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR0), |
| root->appendNew<Const64Value>(proc, Origin(), b))); |
| |
| CHECK(compileAndRun<int64_t>(proc, a) == a * b); |
| } |
| |
| void testMulImmArg(int a, int b) |
| { |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| root->appendNewControlValue( |
| proc, Return, Origin(), |
| root->appendNew<Value>( |
| proc, Mul, Origin(), |
| root->appendNew<Const64Value>(proc, Origin(), a), |
| root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR0))); |
| |
| CHECK(compileAndRun<int>(proc, b) == a * b); |
| } |
| |
| void testMulArgs32(int a, int b) |
| { |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| root->appendNewControlValue( |
| proc, Return, Origin(), |
| root->appendNew<Value>( |
| proc, Mul, Origin(), |
| root->appendNew<Value>( |
| proc, Trunc, Origin(), |
| root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR0)), |
| root->appendNew<Value>( |
| proc, Trunc, Origin(), |
| root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR1)))); |
| |
| CHECK(compileAndRun<int>(proc, a, b) == a * b); |
| } |
| |
| void testMulArgs32SignExtend() |
| { |
| Procedure proc; |
| if (proc.optLevel() < 2) |
| return; |
| BasicBlock* root = proc.addBlock(); |
| Value* arg1 = root->appendNew<Value>( |
| proc, Trunc, Origin(), |
| root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR0)); |
| Value* arg2 = root->appendNew<Value>( |
| proc, Trunc, Origin(), |
| root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR1)); |
| Value* arg164 = root->appendNew<Value>(proc, SExt32, Origin(), arg1); |
| Value* arg264 = root->appendNew<Value>(proc, SExt32, Origin(), arg2); |
| Value* mul = root->appendNew<Value>(proc, Mul, Origin(), arg164, arg264); |
| root->appendNewControlValue(proc, Return, Origin(), mul); |
| |
| auto code = compileProc(proc); |
| if (isARM64()) |
| checkUsesInstruction(*code, "smull"); |
| |
| for (auto nOperand : int32Operands()) { |
| for (auto mOperand : int32Operands()) { |
| int32_t n = nOperand.value; |
| int32_t m = mOperand.value; |
| CHECK_EQ(invoke<int64_t>(*code, n, m), static_cast<int64_t>(n) * static_cast<int64_t>(m)); |
| } |
| } |
| } |
| |
| void testMulArgs32ZeroExtend() |
| { |
| Procedure proc; |
| if (proc.optLevel() < 2) |
| return; |
| BasicBlock* root = proc.addBlock(); |
| Value* arg1 = root->appendNew<Value>( |
| proc, Trunc, Origin(), |
| root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR0)); |
| Value* arg2 = root->appendNew<Value>( |
| proc, Trunc, Origin(), |
| root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR1)); |
| Value* left = root->appendNew<Value>(proc, ZExt32, Origin(), arg1); |
| Value* right = root->appendNew<Value>(proc, ZExt32, Origin(), arg2); |
| Value* mul = root->appendNew<Value>(proc, Mul, Origin(), left, right); |
| root->appendNewControlValue(proc, Return, Origin(), mul); |
| |
| auto code = compileProc(proc); |
| if (isARM64()) |
| checkUsesInstruction(*code, "umull"); |
| |
| for (auto nOperand : int32Operands()) { |
| for (auto mOperand : int32Operands()) { |
| uint32_t n = nOperand.value; |
| uint32_t m = mOperand.value; |
| CHECK_EQ(invoke<uint64_t>(*code, n, m), static_cast<uint64_t>(n) * static_cast<uint64_t>(m)); |
| } |
| } |
| } |
| |
| void testMulImm32SignExtend(const int a, int b) |
| { |
| Procedure proc; |
| if (proc.optLevel() < 1) |
| return; |
| BasicBlock* root = proc.addBlock(); |
| Value* arg1 = root->appendNew<Const64Value>(proc, Origin(), a); |
| Value* arg2 = root->appendNew<Value>( |
| proc, Trunc, Origin(), |
| root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR0)); |
| Value* arg264 = root->appendNew<Value>(proc, SExt32, Origin(), arg2); |
| Value* mul = root->appendNew<Value>(proc, Mul, Origin(), arg1, arg264); |
| root->appendNewControlValue(proc, Return, Origin(), mul); |
| |
| auto code = compileProc(proc); |
| |
| CHECK_EQ(invoke<long int>(*code, b), ((long int) a) * ((long int) b)); |
| } |
| |
| void testMulLoadTwice() |
| { |
| auto test = [&] () { |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| int32_t value = 42; |
| Value* load = root->appendNew<MemoryValue>( |
| proc, Load, Int32, Origin(), |
| root->appendNew<ConstPtrValue>(proc, Origin(), &value)); |
| root->appendNewControlValue( |
| proc, Return, Origin(), |
| root->appendNew<Value>(proc, Mul, Origin(), load, load)); |
| |
| auto code = compileProc(proc); |
| CHECK(invoke<int32_t>(*code) == 42 * 42); |
| }; |
| |
| test(); |
| } |
| |
| void testMulAddArgsLeft() |
| { |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| |
| Value* arg0 = root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR0); |
| Value* arg1 = root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR1); |
| Value* arg2 = root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR2); |
| Value* multiplied = root->appendNew<Value>(proc, Mul, Origin(), arg0, arg1); |
| Value* added = root->appendNew<Value>(proc, Add, Origin(), multiplied, arg2); |
| root->appendNewControlValue(proc, Return, Origin(), added); |
| |
| auto code = compileProc(proc); |
| if (isARM64()) |
| checkUsesInstruction(*code, "madd"); |
| |
| auto testValues = int64Operands(); |
| for (auto a : testValues) { |
| for (auto b : testValues) { |
| for (auto c : testValues) |
| CHECK_EQ(invoke<int64_t>(*code, a.value, b.value, c.value), a.value * b.value + c.value); |
| } |
| } |
| } |
| |
| void testMulAddArgsRight() |
| { |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| |
| Value* arg0 = root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR0); |
| Value* arg1 = root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR1); |
| Value* arg2 = root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR2); |
| Value* multiplied = root->appendNew<Value>(proc, Mul, Origin(), arg1, arg2); |
| Value* added = root->appendNew<Value>(proc, Add, Origin(), arg0, multiplied); |
| root->appendNewControlValue(proc, Return, Origin(), added); |
| |
| auto code = compileProc(proc); |
| if (isARM64()) |
| checkUsesInstruction(*code, "madd"); |
| |
| auto testValues = int64Operands(); |
| for (auto a : testValues) { |
| for (auto b : testValues) { |
| for (auto c : testValues) |
| CHECK_EQ(invoke<int64_t>(*code, a.value, b.value, c.value), a.value + b.value * c.value); |
| } |
| } |
| } |
| |
| void testMulAddSignExtend32ArgsLeft() |
| { |
| // d = SExt32(n) * SExt32(m) + a |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| |
| Value* nValue = root->appendNew<Value>( |
| proc, SExt32, Origin(), |
| root->appendNew<Value>( |
| proc, Trunc, Origin(), |
| root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR0))); |
| Value* mValue = root->appendNew<Value>( |
| proc, SExt32, Origin(), |
| root->appendNew<Value>( |
| proc, Trunc, Origin(), |
| root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR1))); |
| Value* aValue = root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR2); |
| |
| Value* mulValue = root->appendNew<Value>(proc, Mul, Origin(), nValue, mValue); |
| Value* addValue = root->appendNew<Value>(proc, Add, Origin(), mulValue, aValue); |
| root->appendNewControlValue(proc, Return, Origin(), addValue); |
| |
| auto code = compileProc(proc); |
| if (isARM64()) |
| checkUsesInstruction(*code, "smaddl"); |
| |
| for (auto n : int32Operands()) { |
| for (auto m : int32Operands()) { |
| for (auto a : int64Operands()) { |
| int64_t lhs = invoke<int64_t>(*code, n.value, m.value, a.value); |
| int64_t rhs = static_cast<int64_t>(n.value) * static_cast<int64_t>(m.value) + a.value; |
| CHECK(lhs == rhs); |
| } |
| } |
| } |
| } |
| |
| void testMulAddSignExtend32ArgsRight() |
| { |
| // d = a + SExt32(n) * SExt32(m) |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| |
| Value* aValue = root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR0); |
| Value* nValue = root->appendNew<Value>( |
| proc, SExt32, Origin(), |
| root->appendNew<Value>( |
| proc, Trunc, Origin(), |
| root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR1))); |
| Value* mValue = root->appendNew<Value>( |
| proc, SExt32, Origin(), |
| root->appendNew<Value>( |
| proc, Trunc, Origin(), |
| root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR2))); |
| |
| Value* mulValue = root->appendNew<Value>(proc, Mul, Origin(), nValue, mValue); |
| Value* addValue = root->appendNew<Value>(proc, Add, Origin(), aValue, mulValue); |
| root->appendNewControlValue(proc, Return, Origin(), addValue); |
| |
| auto code = compileProc(proc); |
| if (isARM64()) |
| checkUsesInstruction(*code, "smaddl"); |
| |
| for (auto a : int64Operands()) { |
| for (auto n : int32Operands()) { |
| for (auto m : int32Operands()) { |
| int64_t lhs = invoke<int64_t>(*code, a.value, n.value, m.value); |
| int64_t rhs = a.value + static_cast<int64_t>(n.value) * static_cast<int64_t>(m.value); |
| CHECK(lhs == rhs); |
| } |
| } |
| } |
| } |
| |
| void testMulAddZeroExtend32ArgsLeft() |
| { |
| // d = ZExt32(n) * ZExt32(m) + a |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| |
| Value* nValue = root->appendNew<Value>( |
| proc, ZExt32, Origin(), |
| root->appendNew<Value>( |
| proc, Trunc, Origin(), |
| root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR0))); |
| Value* mValue = root->appendNew<Value>( |
| proc, ZExt32, Origin(), |
| root->appendNew<Value>( |
| proc, Trunc, Origin(), |
| root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR1))); |
| Value* aValue = root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR2); |
| |
| Value* mulValue = root->appendNew<Value>(proc, Mul, Origin(), nValue, mValue); |
| Value* addValue = root->appendNew<Value>(proc, Add, Origin(), mulValue, aValue); |
| root->appendNewControlValue(proc, Return, Origin(), addValue); |
| |
| auto code = compileProc(proc); |
| if (isARM64()) |
| checkUsesInstruction(*code, "umaddl"); |
| |
| for (auto n : int32Operands()) { |
| for (auto m : int32Operands()) { |
| for (auto a : int64Operands()) { |
| uint32_t un = n.value; |
| uint32_t um = m.value; |
| int64_t lhs = invoke<int64_t>(*code, un, um, a.value); |
| int64_t rhs = static_cast<int64_t>(un) * static_cast<int64_t>(um) + a.value; |
| CHECK(lhs == rhs); |
| } |
| } |
| } |
| } |
| |
| void testMulAddZeroExtend32ArgsRight() |
| { |
| // d = a + ZExt32(n) * ZExt32(m) |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| |
| Value* aValue = root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR0); |
| Value* nValue = root->appendNew<Value>( |
| proc, ZExt32, Origin(), |
| root->appendNew<Value>( |
| proc, Trunc, Origin(), |
| root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR1))); |
| Value* mValue = root->appendNew<Value>( |
| proc, ZExt32, Origin(), |
| root->appendNew<Value>( |
| proc, Trunc, Origin(), |
| root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR2))); |
| |
| Value* mulValue = root->appendNew<Value>(proc, Mul, Origin(), nValue, mValue); |
| Value* addValue = root->appendNew<Value>(proc, Add, Origin(), aValue, mulValue); |
| root->appendNewControlValue(proc, Return, Origin(), addValue); |
| |
| auto code = compileProc(proc); |
| if (isARM64()) |
| checkUsesInstruction(*code, "umaddl"); |
| |
| for (auto a : int64Operands()) { |
| for (auto n : int32Operands()) { |
| for (auto m : int32Operands()) { |
| uint32_t un = n.value; |
| uint32_t um = m.value; |
| int64_t lhs = invoke<int64_t>(*code, a.value, un, um); |
| int64_t rhs = a.value + static_cast<int64_t>(un) * static_cast<int64_t>(um); |
| CHECK(lhs == rhs); |
| } |
| } |
| } |
| } |
| |
| void testMulAddArgsLeft32() |
| { |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| |
| Value* arg0 = root->appendNew<Value>(proc, Trunc, Origin(), |
| root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR0)); |
| Value* arg1 = root->appendNew<Value>(proc, Trunc, Origin(), |
| root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR1)); |
| Value* arg2 = root->appendNew<Value>(proc, Trunc, Origin(), |
| root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR2)); |
| Value* multiplied = root->appendNew<Value>(proc, Mul, Origin(), arg0, arg1); |
| Value* added = root->appendNew<Value>(proc, Add, Origin(), multiplied, arg2); |
| root->appendNewControlValue(proc, Return, Origin(), added); |
| |
| auto code = compileProc(proc); |
| if (isARM64()) |
| checkUsesInstruction(*code, "madd"); |
| |
| auto testValues = int32Operands(); |
| for (auto a : testValues) { |
| for (auto b : testValues) { |
| for (auto c : testValues) |
| CHECK(invoke<int32_t>(*code, a.value, b.value, c.value) == a.value * b.value + c.value); |
| } |
| } |
| } |
| |
| void testMulAddArgsRight32() |
| { |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| |
| Value* arg0 = root->appendNew<Value>(proc, Trunc, Origin(), |
| root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR0)); |
| Value* arg1 = root->appendNew<Value>(proc, Trunc, Origin(), |
| root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR1)); |
| Value* arg2 = root->appendNew<Value>(proc, Trunc, Origin(), |
| root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR2)); |
| Value* multiplied = root->appendNew<Value>(proc, Mul, Origin(), arg1, arg2); |
| Value* added = root->appendNew<Value>(proc, Add, Origin(), arg0, multiplied); |
| root->appendNewControlValue(proc, Return, Origin(), added); |
| |
| auto code = compileProc(proc); |
| if (isARM64()) |
| checkUsesInstruction(*code, "madd"); |
| |
| auto testValues = int32Operands(); |
| for (auto a : testValues) { |
| for (auto b : testValues) { |
| for (auto c : testValues) |
| CHECK(invoke<int32_t>(*code, a.value, b.value, c.value) == a.value + b.value * c.value); |
| } |
| } |
| } |
| |
| void testMulSubArgsLeft() |
| { |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| |
| Value* arg0 = root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR0); |
| Value* arg1 = root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR1); |
| Value* arg2 = root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR2); |
| Value* multiplied = root->appendNew<Value>(proc, Mul, Origin(), arg0, arg1); |
| Value* subtracted = root->appendNew<Value>(proc, Sub, Origin(), multiplied, arg2); |
| root->appendNewControlValue(proc, Return, Origin(), subtracted); |
| |
| auto code = compileProc(proc); |
| if (isARM64()) |
| checkDoesNotUseInstruction(*code, "msub"); |
| |
| auto testValues = int64Operands(); |
| for (auto a : testValues) { |
| for (auto b : testValues) { |
| for (auto c : testValues) |
| CHECK_EQ(invoke<int64_t>(*code, a.value, b.value, c.value), a.value * b.value - c.value); |
| } |
| } |
| } |
| |
| void testMulSubArgsRight() |
| { |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| |
| Value* arg0 = root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR0); |
| Value* arg1 = root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR1); |
| Value* arg2 = root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR2); |
| Value* multiplied = root->appendNew<Value>(proc, Mul, Origin(), arg1, arg2); |
| Value* subtracted = root->appendNew<Value>(proc, Sub, Origin(), arg0, multiplied); |
| root->appendNewControlValue(proc, Return, Origin(), subtracted); |
| |
| auto code = compileProc(proc); |
| if (isARM64()) |
| checkUsesInstruction(*code, "msub"); |
| |
| auto testValues = int64Operands(); |
| for (auto a : testValues) { |
| for (auto b : testValues) { |
| for (auto c : testValues) |
| CHECK_EQ(invoke<int64_t>(*code, a.value, b.value, c.value), a.value - b.value * c.value); |
| } |
| } |
| } |
| |
| void testMulSubArgsLeft32() |
| { |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| |
| Value* arg0 = root->appendNew<Value>(proc, Trunc, Origin(), |
| root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR0)); |
| Value* arg1 = root->appendNew<Value>(proc, Trunc, Origin(), |
| root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR1)); |
| Value* arg2 = root->appendNew<Value>(proc, Trunc, Origin(), |
| root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR2)); |
| Value* multiplied = root->appendNew<Value>(proc, Mul, Origin(), arg0, arg1); |
| Value* subtracted = root->appendNew<Value>(proc, Sub, Origin(), multiplied, arg2); |
| root->appendNewControlValue(proc, Return, Origin(), subtracted); |
| |
| auto code = compileProc(proc); |
| if (isARM64()) |
| checkDoesNotUseInstruction(*code, "msub"); |
| |
| auto testValues = int32Operands(); |
| for (auto a : testValues) { |
| for (auto b : testValues) { |
| for (auto c : testValues) |
| CHECK(invoke<int32_t>(*code, a.value, b.value, c.value) == a.value * b.value - c.value); |
| } |
| } |
| } |
| |
| void testMulSubArgsRight32() |
| { |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| |
| Value* arg0 = root->appendNew<Value>(proc, Trunc, Origin(), |
| root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR0)); |
| Value* arg1 = root->appendNew<Value>(proc, Trunc, Origin(), |
| root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR1)); |
| Value* arg2 = root->appendNew<Value>(proc, Trunc, Origin(), |
| root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR2)); |
| Value* multiplied = root->appendNew<Value>(proc, Mul, Origin(), arg1, arg2); |
| Value* subtracted = root->appendNew<Value>(proc, Sub, Origin(), arg0, multiplied); |
| root->appendNewControlValue(proc, Return, Origin(), subtracted); |
| |
| auto code = compileProc(proc); |
| if (isARM64()) |
| checkUsesInstruction(*code, "msub"); |
| |
| auto testValues = int32Operands(); |
| for (auto a : testValues) { |
| for (auto b : testValues) { |
| for (auto c : testValues) |
| CHECK_EQ(invoke<int32_t>(*code, a.value, b.value, c.value), a.value - b.value * c.value); |
| } |
| } |
| } |
| |
| void testMulSubSignExtend32() |
| { |
| // d = a - SExt32(n) * SExt32(m) |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| |
| Value* aValue = root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR0); |
| Value* nValue = root->appendNew<Value>( |
| proc, SExt32, Origin(), |
| root->appendNew<Value>( |
| proc, Trunc, Origin(), |
| root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR1))); |
| Value* mValue = root->appendNew<Value>( |
| proc, SExt32, Origin(), |
| root->appendNew<Value>( |
| proc, Trunc, Origin(), |
| root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR2))); |
| |
| Value* mulValue = root->appendNew<Value>(proc, Mul, Origin(), nValue, mValue); |
| Value* subValue = root->appendNew<Value>(proc, Sub, Origin(), aValue, mulValue); |
| root->appendNewControlValue(proc, Return, Origin(), subValue); |
| |
| auto code = compileProc(proc); |
| if (isARM64()) |
| checkUsesInstruction(*code, "smsubl"); |
| |
| for (auto a : int64Operands()) { |
| for (auto n : int32Operands()) { |
| for (auto m : int32Operands()) { |
| int64_t lhs = invoke<int64_t>(*code, a.value, n.value, m.value); |
| int64_t rhs = a.value - static_cast<int64_t>(n.value) * static_cast<int64_t>(m.value); |
| CHECK(lhs == rhs); |
| } |
| } |
| } |
| } |
| |
| void testMulSubZeroExtend32() |
| { |
| // d = a - ZExt32(n) * ZExt32(m) |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| |
| Value* aValue = root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR0); |
| Value* nValue = root->appendNew<Value>( |
| proc, ZExt32, Origin(), |
| root->appendNew<Value>( |
| proc, Trunc, Origin(), |
| root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR1))); |
| Value* mValue = root->appendNew<Value>( |
| proc, ZExt32, Origin(), |
| root->appendNew<Value>( |
| proc, Trunc, Origin(), |
| root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR2))); |
| |
| Value* mulValue = root->appendNew<Value>(proc, Mul, Origin(), nValue, mValue); |
| Value* subValue = root->appendNew<Value>(proc, Sub, Origin(), aValue, mulValue); |
| root->appendNewControlValue(proc, Return, Origin(), subValue); |
| |
| auto code = compileProc(proc); |
| if (isARM64()) |
| checkUsesInstruction(*code, "umsubl"); |
| |
| for (auto a : int64Operands()) { |
| for (auto n : int32Operands()) { |
| for (auto m : int32Operands()) { |
| uint32_t un = n.value; |
| uint32_t um = m.value; |
| int64_t lhs = invoke<int64_t>(*code, a.value, un, um); |
| int64_t rhs = a.value - static_cast<int64_t>(un) * static_cast<int64_t>(um); |
| CHECK(lhs == rhs); |
| } |
| } |
| } |
| } |
| |
| void testMulNegArgArg(int32_t a, int32_t b) |
| { |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| |
| Value* argA = root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR0); |
| Value* argB = root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR1); |
| Value* negA = root->appendNew<Value>(proc, Neg, Origin(), argA); |
| Value* result = root->appendNew<Value>(proc, Mul, Origin(), negA, argB); |
| root->appendNew<Value>(proc, Return, Origin(), result); |
| |
| auto code = compileProc(proc); |
| if (isARM64() && JSC::Options::defaultB3OptLevel() > 1) |
| checkUsesInstruction(*code, "mneg"); |
| CHECK_EQ(invoke<int32_t>(*code, a, b), (-a) * b); |
| } |
| |
| void testMulNegArgs() |
| { |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| |
| Value* arg0 = root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR0); |
| Value* arg1 = root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR1); |
| Value* multiplied = root->appendNew<Value>(proc, Mul, Origin(), arg0, arg1); |
| Value* zero = root->appendNew<Const64Value>(proc, Origin(), 0); |
| Value* added = root->appendNew<Value>(proc, Sub, Origin(), zero, multiplied); |
| root->appendNewControlValue(proc, Return, Origin(), added); |
| |
| auto code = compileProc(proc); |
| if (isARM64() && JSC::Options::defaultB3OptLevel() > 1) |
| checkUsesInstruction(*code, "mneg"); |
| |
| auto testValues = int64Operands(); |
| for (auto a : testValues) { |
| for (auto b : testValues) { |
| CHECK_EQ(invoke<int64_t>(*code, a.value, b.value), -(a.value * b.value)); |
| } |
| } |
| } |
| |
| void testMulNegArgs32() |
| { |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| |
| Value* arg0 = root->appendNew<Value>(proc, Trunc, Origin(), |
| root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR0)); |
| Value* arg1 = root->appendNew<Value>(proc, Trunc, Origin(), |
| root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR1)); |
| Value* multiplied = root->appendNew<Value>(proc, Mul, Origin(), arg0, arg1); |
| Value* zero = root->appendNew<Const32Value>(proc, Origin(), 0); |
| Value* added = root->appendNew<Value>(proc, Sub, Origin(), zero, multiplied); |
| root->appendNewControlValue(proc, Return, Origin(), added); |
| |
| auto code = compileProc(proc); |
| if (isARM64() && JSC::Options::defaultB3OptLevel() > 1) |
| checkUsesInstruction(*code, "mneg"); |
| |
| auto testValues = int32Operands(); |
| for (auto a : testValues) { |
| for (auto b : testValues) |
| CHECK_EQ(invoke<int32_t>(*code, a.value, b.value), -(a.value * b.value)); |
| } |
| } |
| |
| void testMulNegSignExtend32() |
| { |
| // d = - (SExt32(n) * SExt32(m)) |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| |
| Value* nValue = root->appendNew<Value>( |
| proc, SExt32, Origin(), |
| root->appendNew<Value>( |
| proc, Trunc, Origin(), |
| root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR0))); |
| Value* mValue = root->appendNew<Value>( |
| proc, SExt32, Origin(), |
| root->appendNew<Value>( |
| proc, Trunc, Origin(), |
| root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR1))); |
| |
| Value* mulValue = root->appendNew<Value>(proc, Mul, Origin(), nValue, mValue); |
| Value* negValue = root->appendNew<Value>(proc, Neg, Origin(), mulValue); |
| root->appendNewControlValue(proc, Return, Origin(), negValue); |
| |
| auto code = compileProc(proc); |
| if (isARM64()) |
| checkUsesInstruction(*code, "smnegl"); |
| |
| for (auto n : int32Operands()) { |
| for (auto m : int32Operands()) { |
| int64_t lhs = invoke<int64_t>(*code, n.value, m.value); |
| int64_t rhs = -(static_cast<int64_t>(n.value) * static_cast<int64_t>(m.value)); |
| CHECK(lhs == rhs); |
| } |
| } |
| } |
| |
| void testMulNegZeroExtend32() |
| { |
| // d = - (ZExt32(n) * ZExt32(m)) |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| |
| Value* nValue = root->appendNew<Value>( |
| proc, ZExt32, Origin(), |
| root->appendNew<Value>( |
| proc, Trunc, Origin(), |
| root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR0))); |
| Value* mValue = root->appendNew<Value>( |
| proc, ZExt32, Origin(), |
| root->appendNew<Value>( |
| proc, Trunc, Origin(), |
| root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR1))); |
| |
| Value* mulValue = root->appendNew<Value>(proc, Mul, Origin(), nValue, mValue); |
| Value* negValue = root->appendNew<Value>(proc, Neg, Origin(), mulValue); |
| root->appendNewControlValue(proc, Return, Origin(), negValue); |
| |
| auto code = compileProc(proc); |
| if (isARM64()) |
| checkUsesInstruction(*code, "umnegl"); |
| |
| for (auto n : int32Operands()) { |
| for (auto m : int32Operands()) { |
| uint32_t un = n.value; |
| uint32_t um = m.value; |
| int64_t lhs = invoke<int64_t>(*code, un, um); |
| int64_t rhs = -(static_cast<int64_t>(un) * static_cast<int64_t>(um)); |
| CHECK(lhs == rhs); |
| } |
| } |
| } |
| |
| void testMulArgDouble(double a) |
| { |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| Value* value = root->appendNew<ArgumentRegValue>(proc, Origin(), FPRInfo::argumentFPR0); |
| root->appendNewControlValue( |
| proc, Return, Origin(), |
| root->appendNew<Value>(proc, Mul, Origin(), value, value)); |
| |
| CHECK(isIdentical(compileAndRun<double>(proc, a), a * a)); |
| } |
| |
| void testMulArgsDouble(double a, double b) |
| { |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| Value* valueA = root->appendNew<ArgumentRegValue>(proc, Origin(), FPRInfo::argumentFPR0); |
| Value* valueB = root->appendNew<ArgumentRegValue>(proc, Origin(), FPRInfo::argumentFPR1); |
| root->appendNewControlValue( |
| proc, Return, Origin(), |
| root->appendNew<Value>(proc, Mul, Origin(), valueA, valueB)); |
| |
| CHECK(isIdentical(compileAndRun<double>(proc, a, b), a * b)); |
| } |
| |
| void testMulArgImmDouble(double a, double b) |
| { |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| Value* valueA = root->appendNew<ArgumentRegValue>(proc, Origin(), FPRInfo::argumentFPR0); |
| Value* valueB = root->appendNew<ConstDoubleValue>(proc, Origin(), b); |
| root->appendNewControlValue( |
| proc, Return, Origin(), |
| root->appendNew<Value>(proc, Mul, Origin(), valueA, valueB)); |
| |
| CHECK(isIdentical(compileAndRun<double>(proc, a), a * b)); |
| } |
| |
| void testMulImmArgDouble(double a, double b) |
| { |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| Value* valueA = root->appendNew<ConstDoubleValue>(proc, Origin(), a); |
| Value* valueB = root->appendNew<ArgumentRegValue>(proc, Origin(), FPRInfo::argumentFPR0); |
| root->appendNewControlValue( |
| proc, Return, Origin(), |
| root->appendNew<Value>(proc, Mul, Origin(), valueA, valueB)); |
| |
| CHECK(isIdentical(compileAndRun<double>(proc, b), a * b)); |
| } |
| |
| void testMulImmsDouble(double a, double b) |
| { |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| Value* valueA = root->appendNew<ConstDoubleValue>(proc, Origin(), a); |
| Value* valueB = root->appendNew<ConstDoubleValue>(proc, Origin(), b); |
| root->appendNewControlValue( |
| proc, Return, Origin(), |
| root->appendNew<Value>(proc, Mul, Origin(), valueA, valueB)); |
| |
| CHECK(isIdentical(compileAndRun<double>(proc), a * b)); |
| } |
| |
| void testMulArgFloat(float a) |
| { |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| Value* argument32 = root->appendNew<Value>(proc, Trunc, Origin(), |
| root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR0)); |
| Value* floatValue = root->appendNew<Value>(proc, BitwiseCast, Origin(), argument32); |
| Value* result = root->appendNew<Value>(proc, Mul, Origin(), floatValue, floatValue); |
| Value* result32 = root->appendNew<Value>(proc, BitwiseCast, Origin(), result); |
| root->appendNewControlValue(proc, Return, Origin(), result32); |
| |
| |
| CHECK(isIdentical(compileAndRun<int32_t>(proc, bitwise_cast<int32_t>(a)), bitwise_cast<int32_t>(a * a))); |
| } |
| |
| void testMulArgsFloat(float a, float b) |
| { |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| Value* argument1int32 = root->appendNew<Value>(proc, Trunc, Origin(), |
| root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR0)); |
| Value* argument2int32 = root->appendNew<Value>(proc, Trunc, Origin(), |
| root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR1)); |
| Value* floatValue1 = root->appendNew<Value>(proc, BitwiseCast, Origin(), argument1int32); |
| Value* floatValue2 = root->appendNew<Value>(proc, BitwiseCast, Origin(), argument2int32); |
| Value* result = root->appendNew<Value>(proc, Mul, Origin(), floatValue1, floatValue2); |
| Value* result32 = root->appendNew<Value>(proc, BitwiseCast, Origin(), result); |
| root->appendNewControlValue(proc, Return, Origin(), result32); |
| |
| CHECK(isIdentical(compileAndRun<int32_t>(proc, bitwise_cast<int32_t>(a), bitwise_cast<int32_t>(b)), bitwise_cast<int32_t>(a * b))); |
| } |
| |
| void testMulArgImmFloat(float a, float b) |
| { |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| Value* argument32 = root->appendNew<Value>(proc, Trunc, Origin(), |
| root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR0)); |
| Value* floatValue = root->appendNew<Value>(proc, BitwiseCast, Origin(), argument32); |
| Value* constValue = root->appendNew<ConstFloatValue>(proc, Origin(), b); |
| Value* result = root->appendNew<Value>(proc, Mul, Origin(), floatValue, constValue); |
| Value* result32 = root->appendNew<Value>(proc, BitwiseCast, Origin(), result); |
| root->appendNewControlValue(proc, Return, Origin(), result32); |
| |
| CHECK(isIdentical(compileAndRun<int32_t>(proc, bitwise_cast<int32_t>(a)), bitwise_cast<int32_t>(a * b))); |
| } |
| |
| void testMulImmArgFloat(float a, float b) |
| { |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| Value* argument32 = root->appendNew<Value>(proc, Trunc, Origin(), |
| root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR0)); |
| Value* floatValue = root->appendNew<Value>(proc, BitwiseCast, Origin(), argument32); |
| Value* constValue = root->appendNew<ConstFloatValue>(proc, Origin(), a); |
| Value* result = root->appendNew<Value>(proc, Mul, Origin(), constValue, floatValue); |
| Value* result32 = root->appendNew<Value>(proc, BitwiseCast, Origin(), result); |
| root->appendNewControlValue(proc, Return, Origin(), result32); |
| |
| CHECK(isIdentical(compileAndRun<int32_t>(proc, bitwise_cast<int32_t>(b)), bitwise_cast<int32_t>(a * b))); |
| } |
| |
| void testMulImmsFloat(float a, float b) |
| { |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| Value* constValue1 = root->appendNew<ConstFloatValue>(proc, Origin(), a); |
| Value* constValue2 = root->appendNew<ConstFloatValue>(proc, Origin(), b); |
| Value* result = root->appendNew<Value>(proc, Mul, Origin(), constValue1, constValue2); |
| Value* result32 = root->appendNew<Value>(proc, BitwiseCast, Origin(), result); |
| root->appendNewControlValue(proc, Return, Origin(), result32); |
| |
| CHECK(isIdentical(compileAndRun<int32_t>(proc), bitwise_cast<int32_t>(a * b))); |
| } |
| |
| void testMulArgFloatWithUselessDoubleConversion(float a) |
| { |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| Value* argumentInt32 = root->appendNew<Value>(proc, Trunc, Origin(), |
| root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR0)); |
| Value* floatValue = root->appendNew<Value>(proc, BitwiseCast, Origin(), argumentInt32); |
| Value* asDouble = root->appendNew<Value>(proc, FloatToDouble, Origin(), floatValue); |
| Value* result = root->appendNew<Value>(proc, Mul, Origin(), asDouble, asDouble); |
| Value* floatResult = root->appendNew<Value>(proc, DoubleToFloat, Origin(), result); |
| Value* result32 = root->appendNew<Value>(proc, BitwiseCast, Origin(), floatResult); |
| root->appendNewControlValue(proc, Return, Origin(), result32); |
| |
| CHECK(isIdentical(compileAndRun<int32_t>(proc, bitwise_cast<int32_t>(a)), bitwise_cast<int32_t>(a * a))); |
| } |
| |
| void testMulArgsFloatWithUselessDoubleConversion(float a, float b) |
| { |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| Value* argument1int32 = root->appendNew<Value>(proc, Trunc, Origin(), |
| root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR0)); |
| Value* argument2int32 = root->appendNew<Value>(proc, Trunc, Origin(), |
| root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR1)); |
| Value* floatValue1 = root->appendNew<Value>(proc, BitwiseCast, Origin(), argument1int32); |
| Value* floatValue2 = root->appendNew<Value>(proc, BitwiseCast, Origin(), argument2int32); |
| Value* asDouble1 = root->appendNew<Value>(proc, FloatToDouble, Origin(), floatValue1); |
| Value* asDouble2 = root->appendNew<Value>(proc, FloatToDouble, Origin(), floatValue2); |
| Value* result = root->appendNew<Value>(proc, Mul, Origin(), asDouble1, asDouble2); |
| Value* floatResult = root->appendNew<Value>(proc, DoubleToFloat, Origin(), result); |
| Value* result32 = root->appendNew<Value>(proc, BitwiseCast, Origin(), floatResult); |
| root->appendNewControlValue(proc, Return, Origin(), result32); |
| |
| CHECK(isIdentical(compileAndRun<int32_t>(proc, bitwise_cast<int32_t>(a), bitwise_cast<int32_t>(b)), bitwise_cast<int32_t>(a * b))); |
| } |
| |
| void testMulArgsFloatWithEffectfulDoubleConversion(float a, float b) |
| { |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| Value* argument1int32 = root->appendNew<Value>(proc, Trunc, Origin(), |
| root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR0)); |
| Value* argument2int32 = root->appendNew<Value>(proc, Trunc, Origin(), |
| root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR1)); |
| Value* floatValue1 = root->appendNew<Value>(proc, BitwiseCast, Origin(), argument1int32); |
| Value* floatValue2 = root->appendNew<Value>(proc, BitwiseCast, Origin(), argument2int32); |
| Value* asDouble1 = root->appendNew<Value>(proc, FloatToDouble, Origin(), floatValue1); |
| Value* asDouble2 = root->appendNew<Value>(proc, FloatToDouble, Origin(), floatValue2); |
| Value* result = root->appendNew<Value>(proc, Mul, Origin(), asDouble1, asDouble2); |
| Value* floatResult = root->appendNew<Value>(proc, DoubleToFloat, Origin(), result); |
| Value* doubleMulress = root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR2); |
| root->appendNew<MemoryValue>(proc, Store, Origin(), result, doubleMulress); |
| Value* result32 = root->appendNew<Value>(proc, BitwiseCast, Origin(), floatResult); |
| root->appendNewControlValue(proc, Return, Origin(), result32); |
| |
| double effect = 0; |
| CHECK(isIdentical(compileAndRun<int32_t>(proc, bitwise_cast<int32_t>(a), bitwise_cast<int32_t>(b), &effect), bitwise_cast<int32_t>(a * b))); |
| CHECK(isIdentical(effect, static_cast<double>(a) * static_cast<double>(b))); |
| } |
| |
| void testDivArgDouble(double a) |
| { |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| Value* value = root->appendNew<ArgumentRegValue>(proc, Origin(), FPRInfo::argumentFPR0); |
| root->appendNewControlValue( |
| proc, Return, Origin(), |
| root->appendNew<Value>(proc, Div, Origin(), value, value)); |
| |
| CHECK(isIdentical(compileAndRun<double>(proc, a), a / a)); |
| } |
| |
| void testDivArgsDouble(double a, double b) |
| { |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| Value* valueA = root->appendNew<ArgumentRegValue>(proc, Origin(), FPRInfo::argumentFPR0); |
| Value* valueB = root->appendNew<ArgumentRegValue>(proc, Origin(), FPRInfo::argumentFPR1); |
| root->appendNewControlValue( |
| proc, Return, Origin(), |
| root->appendNew<Value>(proc, Div, Origin(), valueA, valueB)); |
| |
| CHECK(isIdentical(compileAndRun<double>(proc, a, b), a / b)); |
| } |
| |
| void testDivArgImmDouble(double a, double b) |
| { |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| Value* valueA = root->appendNew<ArgumentRegValue>(proc, Origin(), FPRInfo::argumentFPR0); |
| Value* valueB = root->appendNew<ConstDoubleValue>(proc, Origin(), b); |
| root->appendNewControlValue( |
| proc, Return, Origin(), |
| root->appendNew<Value>(proc, Div, Origin(), valueA, valueB)); |
| |
| CHECK(isIdentical(compileAndRun<double>(proc, a), a / b)); |
| } |
| |
| void testDivImmArgDouble(double a, double b) |
| { |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| Value* valueA = root->appendNew<ConstDoubleValue>(proc, Origin(), a); |
| Value* valueB = root->appendNew<ArgumentRegValue>(proc, Origin(), FPRInfo::argumentFPR0); |
| root->appendNewControlValue( |
| proc, Return, Origin(), |
| root->appendNew<Value>(proc, Div, Origin(), valueA, valueB)); |
| |
| CHECK(isIdentical(compileAndRun<double>(proc, b), a / b)); |
| } |
| |
| void testDivImmsDouble(double a, double b) |
| { |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| Value* valueA = root->appendNew<ConstDoubleValue>(proc, Origin(), a); |
| Value* valueB = root->appendNew<ConstDoubleValue>(proc, Origin(), b); |
| root->appendNewControlValue( |
| proc, Return, Origin(), |
| root->appendNew<Value>(proc, Div, Origin(), valueA, valueB)); |
| |
| CHECK(isIdentical(compileAndRun<double>(proc), a / b)); |
| } |
| |
| void testDivArgFloat(float a) |
| { |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| Value* argument32 = root->appendNew<Value>(proc, Trunc, Origin(), |
| root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR0)); |
| Value* floatValue = root->appendNew<Value>(proc, BitwiseCast, Origin(), argument32); |
| Value* result = root->appendNew<Value>(proc, Div, Origin(), floatValue, floatValue); |
| Value* result32 = root->appendNew<Value>(proc, BitwiseCast, Origin(), result); |
| root->appendNewControlValue(proc, Return, Origin(), result32); |
| |
| |
| CHECK(isIdentical(compileAndRun<int32_t>(proc, bitwise_cast<int32_t>(a)), bitwise_cast<int32_t>(a / a))); |
| } |
| |
| void testDivArgsFloat(float a, float b) |
| { |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| Value* argument1int32 = root->appendNew<Value>(proc, Trunc, Origin(), |
| root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR0)); |
| Value* argument2int32 = root->appendNew<Value>(proc, Trunc, Origin(), |
| root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR1)); |
| Value* floatValue1 = root->appendNew<Value>(proc, BitwiseCast, Origin(), argument1int32); |
| Value* floatValue2 = root->appendNew<Value>(proc, BitwiseCast, Origin(), argument2int32); |
| Value* result = root->appendNew<Value>(proc, Div, Origin(), floatValue1, floatValue2); |
| Value* result32 = root->appendNew<Value>(proc, BitwiseCast, Origin(), result); |
| root->appendNewControlValue(proc, Return, Origin(), result32); |
| |
| CHECK(isIdentical(compileAndRun<int32_t>(proc, bitwise_cast<int32_t>(a), bitwise_cast<int32_t>(b)), bitwise_cast<int32_t>(a / b))); |
| } |
| |
| void testDivArgImmFloat(float a, float b) |
| { |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| Value* argument32 = root->appendNew<Value>(proc, Trunc, Origin(), |
| root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR0)); |
| Value* floatValue = root->appendNew<Value>(proc, BitwiseCast, Origin(), argument32); |
| Value* constValue = root->appendNew<ConstFloatValue>(proc, Origin(), b); |
| Value* result = root->appendNew<Value>(proc, Div, Origin(), floatValue, constValue); |
| Value* result32 = root->appendNew<Value>(proc, BitwiseCast, Origin(), result); |
| root->appendNewControlValue(proc, Return, Origin(), result32); |
| |
| CHECK(isIdentical(compileAndRun<int32_t>(proc, bitwise_cast<int32_t>(a)), bitwise_cast<int32_t>(a / b))); |
| } |
| |
| void testDivImmArgFloat(float a, float b) |
| { |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| Value* argument32 = root->appendNew<Value>(proc, Trunc, Origin(), |
| root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR0)); |
| Value* floatValue = root->appendNew<Value>(proc, BitwiseCast, Origin(), argument32); |
| Value* constValue = root->appendNew<ConstFloatValue>(proc, Origin(), a); |
| Value* result = root->appendNew<Value>(proc, Div, Origin(), constValue, floatValue); |
| Value* result32 = root->appendNew<Value>(proc, BitwiseCast, Origin(), result); |
| root->appendNewControlValue(proc, Return, Origin(), result32); |
| |
| CHECK(isIdentical(compileAndRun<int32_t>(proc, bitwise_cast<int32_t>(b)), bitwise_cast<int32_t>(a / b))); |
| } |
| |
| void testDivImmsFloat(float a, float b) |
| { |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| Value* constValue1 = root->appendNew<ConstFloatValue>(proc, Origin(), a); |
| Value* constValue2 = root->appendNew<ConstFloatValue>(proc, Origin(), b); |
| Value* result = root->appendNew<Value>(proc, Div, Origin(), constValue1, constValue2); |
| Value* result32 = root->appendNew<Value>(proc, BitwiseCast, Origin(), result); |
| root->appendNewControlValue(proc, Return, Origin(), result32); |
| |
| CHECK(isIdentical(compileAndRun<int32_t>(proc), bitwise_cast<int32_t>(a / b))); |
| } |
| |
| void testModArgDouble(double a) |
| { |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| Value* value = root->appendNew<ArgumentRegValue>(proc, Origin(), FPRInfo::argumentFPR0); |
| root->appendNewControlValue( |
| proc, Return, Origin(), |
| root->appendNew<Value>(proc, Mod, Origin(), value, value)); |
| |
| CHECK(isIdentical(compileAndRun<double>(proc, a), fmod(a, a))); |
| } |
| |
| void testModArgsDouble(double a, double b) |
| { |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| Value* valueA = root->appendNew<ArgumentRegValue>(proc, Origin(), FPRInfo::argumentFPR0); |
| Value* valueB = root->appendNew<ArgumentRegValue>(proc, Origin(), FPRInfo::argumentFPR1); |
| root->appendNewControlValue( |
| proc, Return, Origin(), |
| root->appendNew<Value>(proc, Mod, Origin(), valueA, valueB)); |
| |
| CHECK(isIdentical(compileAndRun<double>(proc, a, b), fmod(a, b))); |
| } |
| |
| void testModArgImmDouble(double a, double b) |
| { |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| Value* valueA = root->appendNew<ArgumentRegValue>(proc, Origin(), FPRInfo::argumentFPR0); |
| Value* valueB = root->appendNew<ConstDoubleValue>(proc, Origin(), b); |
| root->appendNewControlValue( |
| proc, Return, Origin(), |
| root->appendNew<Value>(proc, Mod, Origin(), valueA, valueB)); |
| |
| CHECK(isIdentical(compileAndRun<double>(proc, a), fmod(a, b))); |
| } |
| |
| void testModImmArgDouble(double a, double b) |
| { |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| Value* valueA = root->appendNew<ConstDoubleValue>(proc, Origin(), a); |
| Value* valueB = root->appendNew<ArgumentRegValue>(proc, Origin(), FPRInfo::argumentFPR0); |
| root->appendNewControlValue( |
| proc, Return, Origin(), |
| root->appendNew<Value>(proc, Mod, Origin(), valueA, valueB)); |
| |
| CHECK(isIdentical(compileAndRun<double>(proc, b), fmod(a, b))); |
| } |
| |
| void testModImmsDouble(double a, double b) |
| { |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| Value* valueA = root->appendNew<ConstDoubleValue>(proc, Origin(), a); |
| Value* valueB = root->appendNew<ConstDoubleValue>(proc, Origin(), b); |
| root->appendNewControlValue( |
| proc, Return, Origin(), |
| root->appendNew<Value>(proc, Mod, Origin(), valueA, valueB)); |
| |
| CHECK(isIdentical(compileAndRun<double>(proc), fmod(a, b))); |
| } |
| |
| void testModArgFloat(float a) |
| { |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| Value* argument32 = root->appendNew<Value>(proc, Trunc, Origin(), |
| root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR0)); |
| Value* floatValue = root->appendNew<Value>(proc, BitwiseCast, Origin(), argument32); |
| Value* result = root->appendNew<Value>(proc, Mod, Origin(), floatValue, floatValue); |
| Value* result32 = root->appendNew<Value>(proc, BitwiseCast, Origin(), result); |
| root->appendNewControlValue(proc, Return, Origin(), result32); |
| |
| |
| CHECK(isIdentical(compileAndRun<int32_t>(proc, bitwise_cast<int32_t>(a)), bitwise_cast<int32_t>(static_cast<float>(fmod(a, a))))); |
| } |
| |
| void testModArgsFloat(float a, float b) |
| { |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| Value* argument1int32 = root->appendNew<Value>(proc, Trunc, Origin(), |
| root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR0)); |
| Value* argument2int32 = root->appendNew<Value>(proc, Trunc, Origin(), |
| root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR1)); |
| Value* floatValue1 = root->appendNew<Value>(proc, BitwiseCast, Origin(), argument1int32); |
| Value* floatValue2 = root->appendNew<Value>(proc, BitwiseCast, Origin(), argument2int32); |
| Value* result = root->appendNew<Value>(proc, Mod, Origin(), floatValue1, floatValue2); |
| Value* result32 = root->appendNew<Value>(proc, BitwiseCast, Origin(), result); |
| root->appendNewControlValue(proc, Return, Origin(), result32); |
| |
| CHECK(isIdentical(compileAndRun<int32_t>(proc, bitwise_cast<int32_t>(a), bitwise_cast<int32_t>(b)), bitwise_cast<int32_t>(static_cast<float>(fmod(a, b))))); |
| } |
| |
| void testModArgImmFloat(float a, float b) |
| { |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| Value* argument32 = root->appendNew<Value>(proc, Trunc, Origin(), |
| root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR0)); |
| Value* floatValue = root->appendNew<Value>(proc, BitwiseCast, Origin(), argument32); |
| Value* constValue = root->appendNew<ConstFloatValue>(proc, Origin(), b); |
| Value* result = root->appendNew<Value>(proc, Mod, Origin(), floatValue, constValue); |
| Value* result32 = root->appendNew<Value>(proc, BitwiseCast, Origin(), result); |
| root->appendNewControlValue(proc, Return, Origin(), result32); |
| |
| CHECK(isIdentical(compileAndRun<int32_t>(proc, bitwise_cast<int32_t>(a)), bitwise_cast<int32_t>(static_cast<float>(fmod(a, b))))); |
| } |
| |
| void testModImmArgFloat(float a, float b) |
| { |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| Value* argument32 = root->appendNew<Value>(proc, Trunc, Origin(), |
| root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR0)); |
| Value* floatValue = root->appendNew<Value>(proc, BitwiseCast, Origin(), argument32); |
| Value* constValue = root->appendNew<ConstFloatValue>(proc, Origin(), a); |
| Value* result = root->appendNew<Value>(proc, Mod, Origin(), constValue, floatValue); |
| Value* result32 = root->appendNew<Value>(proc, BitwiseCast, Origin(), result); |
| root->appendNewControlValue(proc, Return, Origin(), result32); |
| |
| CHECK(isIdentical(compileAndRun<int32_t>(proc, bitwise_cast<int32_t>(b)), bitwise_cast<int32_t>(static_cast<float>(fmod(a, b))))); |
| } |
| |
| void testModImmsFloat(float a, float b) |
| { |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| Value* constValue1 = root->appendNew<ConstFloatValue>(proc, Origin(), a); |
| Value* constValue2 = root->appendNew<ConstFloatValue>(proc, Origin(), b); |
| Value* result = root->appendNew<Value>(proc, Mod, Origin(), constValue1, constValue2); |
| Value* result32 = root->appendNew<Value>(proc, BitwiseCast, Origin(), result); |
| root->appendNewControlValue(proc, Return, Origin(), result32); |
| |
| CHECK(isIdentical(compileAndRun<int32_t>(proc), bitwise_cast<int32_t>(static_cast<float>(fmod(a, b))))); |
| } |
| |
| void testDivArgFloatWithUselessDoubleConversion(float a) |
| { |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| Value* argumentInt32 = root->appendNew<Value>(proc, Trunc, Origin(), |
| root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR0)); |
| Value* floatValue = root->appendNew<Value>(proc, BitwiseCast, Origin(), argumentInt32); |
| Value* asDouble = root->appendNew<Value>(proc, FloatToDouble, Origin(), floatValue); |
| Value* result = root->appendNew<Value>(proc, Div, Origin(), asDouble, asDouble); |
| Value* floatResult = root->appendNew<Value>(proc, DoubleToFloat, Origin(), result); |
| Value* result32 = root->appendNew<Value>(proc, BitwiseCast, Origin(), floatResult); |
| root->appendNewControlValue(proc, Return, Origin(), result32); |
| |
| CHECK(isIdentical(compileAndRun<int32_t>(proc, bitwise_cast<int32_t>(a)), bitwise_cast<int32_t>(a / a))); |
| } |
| |
| void testDivArgsFloatWithUselessDoubleConversion(float a, float b) |
| { |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| Value* argument1int32 = root->appendNew<Value>(proc, Trunc, Origin(), |
| root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR0)); |
| Value* argument2int32 = root->appendNew<Value>(proc, Trunc, Origin(), |
| root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR1)); |
| Value* floatValue1 = root->appendNew<Value>(proc, BitwiseCast, Origin(), argument1int32); |
| Value* floatValue2 = root->appendNew<Value>(proc, BitwiseCast, Origin(), argument2int32); |
| Value* asDouble1 = root->appendNew<Value>(proc, FloatToDouble, Origin(), floatValue1); |
| Value* asDouble2 = root->appendNew<Value>(proc, FloatToDouble, Origin(), floatValue2); |
| Value* result = root->appendNew<Value>(proc, Div, Origin(), asDouble1, asDouble2); |
| Value* floatResult = root->appendNew<Value>(proc, DoubleToFloat, Origin(), result); |
| Value* result32 = root->appendNew<Value>(proc, BitwiseCast, Origin(), floatResult); |
| root->appendNewControlValue(proc, Return, Origin(), result32); |
| |
| CHECK(isIdentical(compileAndRun<int32_t>(proc, bitwise_cast<int32_t>(a), bitwise_cast<int32_t>(b)), bitwise_cast<int32_t>(a / b))); |
| } |
| |
| void testDivArgsFloatWithEffectfulDoubleConversion(float a, float b) |
| { |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| Value* argument1int32 = root->appendNew<Value>(proc, Trunc, Origin(), |
| root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR0)); |
| Value* argument2int32 = root->appendNew<Value>(proc, Trunc, Origin(), |
| root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR1)); |
| Value* floatValue1 = root->appendNew<Value>(proc, BitwiseCast, Origin(), argument1int32); |
| Value* floatValue2 = root->appendNew<Value>(proc, BitwiseCast, Origin(), argument2int32); |
| Value* asDouble1 = root->appendNew<Value>(proc, FloatToDouble, Origin(), floatValue1); |
| Value* asDouble2 = root->appendNew<Value>(proc, FloatToDouble, Origin(), floatValue2); |
| Value* result = root->appendNew<Value>(proc, Div, Origin(), asDouble1, asDouble2); |
| Value* floatResult = root->appendNew<Value>(proc, DoubleToFloat, Origin(), result); |
| Value* doubleDivress = root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR2); |
| root->appendNew<MemoryValue>(proc, Store, Origin(), result, doubleDivress); |
| Value* result32 = root->appendNew<Value>(proc, BitwiseCast, Origin(), floatResult); |
| root->appendNewControlValue(proc, Return, Origin(), result32); |
| |
| double effect = 0; |
| CHECK(isIdentical(compileAndRun<int32_t>(proc, bitwise_cast<int32_t>(a), bitwise_cast<int32_t>(b), &effect), bitwise_cast<int32_t>(a / b))); |
| CHECK(isIdentical(effect, static_cast<double>(a) / static_cast<double>(b))); |
| } |
| |
| void testUDivArgsInt32(uint32_t a, uint32_t b) |
| { |
| // UDiv with denominator == 0 is invalid. |
| if (!b) |
| return; |
| |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| Value* argument1 = root->appendNew<Value>(proc, Trunc, Origin(), |
| root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR0)); |
| Value* argument2 = root->appendNew<Value>(proc, Trunc, Origin(), |
| root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR1)); |
| Value* result = root->appendNew<Value>(proc, UDiv, Origin(), argument1, argument2); |
| root->appendNew<Value>(proc, Return, Origin(), result); |
| |
| CHECK_EQ(compileAndRun<uint32_t>(proc, a, b), a / b); |
| } |
| |
| void testUDivArgsInt64(uint64_t a, uint64_t b) |
| { |
| // UDiv with denominator == 0 is invalid. |
| if (!b) |
| return; |
| |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| Value* argument1 = root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR0); |
| Value* argument2 = root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR1); |
| Value* result = root->appendNew<Value>(proc, UDiv, Origin(), argument1, argument2); |
| root->appendNew<Value>(proc, Return, Origin(), result); |
| |
| CHECK_EQ(compileAndRun<uint64_t>(proc, a, b), a / b); |
| } |
| |
| void testUModArgsInt32(uint32_t a, uint32_t b) |
| { |
| // UMod with denominator == 0 is invalid. |
| if (!b) |
| return; |
| |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| Value* argument1 = root->appendNew<Value>(proc, Trunc, Origin(), |
| root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR0)); |
| Value* argument2 = root->appendNew<Value>(proc, Trunc, Origin(), |
| root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR1)); |
| Value* result = root->appendNew<Value>(proc, UMod, Origin(), argument1, argument2); |
| root->appendNew<Value>(proc, Return, Origin(), result); |
| |
| CHECK_EQ(compileAndRun<uint32_t>(proc, a, b), a % b); |
| } |
| |
| void testUModArgsInt64(uint64_t a, uint64_t b) |
| { |
| // UMod with denominator == 0 is invalid. |
| if (!b) |
| return; |
| |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| Value* argument1 = root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR0); |
| Value* argument2 = root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR1); |
| Value* result = root->appendNew<Value>(proc, UMod, Origin(), argument1, argument2); |
| root->appendNew<Value>(proc, Return, Origin(), result); |
| |
| CHECK_EQ(compileAndRun<uint64_t>(proc, a, b), a % b); |
| } |
| |
| void testSubArg(int a) |
| { |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| Value* value = root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR0); |
| root->appendNewControlValue( |
| proc, Return, Origin(), |
| root->appendNew<Value>(proc, Sub, Origin(), value, value)); |
| |
| CHECK(!compileAndRun<int>(proc, a)); |
| } |
| |
| void testSubArgs(int a, int b) |
| { |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| root->appendNewControlValue( |
| proc, Return, Origin(), |
| root->appendNew<Value>( |
| proc, Sub, Origin(), |
| root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR0), |
| root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR1))); |
| |
| CHECK(compileAndRun<int>(proc, a, b) == a - b); |
| } |
| |
| void testSubArgImm(int64_t a, int64_t b) |
| { |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| root->appendNewControlValue( |
| proc, Return, Origin(), |
| root->appendNew<Value>( |
| proc, Sub, Origin(), |
| root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR0), |
| root->appendNew<Const64Value>(proc, Origin(), b))); |
| |
| CHECK(compileAndRun<int64_t>(proc, a) == a - b); |
| } |
| |
| void testSubNeg(int a, int b) |
| { |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| root->appendNewControlValue( |
| proc, Return, Origin(), |
| root->appendNew<Value>( |
| proc, Sub, Origin(), |
| root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR0), |
| root->appendNew<Value>(proc, Neg, Origin(), |
| root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR1)))); |
| |
| CHECK(compileAndRun<int>(proc, a, b) == a - (- b)); |
| } |
| |
| void testNegSub(int a, int b) |
| { |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| root->appendNewControlValue( |
| proc, Return, Origin(), |
| root->appendNew<Value>( |
| proc, Neg, Origin(), |
| root->appendNew<Value>(proc, Sub, Origin(), |
| root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR0), |
| root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR1)))); |
| |
| CHECK(compileAndRun<int>(proc, a, b) == -(a - b)); |
| } |
| |
| void testNegValueSubOne(int a) |
| { |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| Value* argument = root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR0); |
| Value* negArgument = root->appendNew<Value>(proc, Sub, Origin(), |
| root->appendNew<Const64Value>(proc, Origin(), 0), |
| argument); |
| Value* negArgumentMinusOne = root->appendNew<Value>(proc, Sub, Origin(), |
| negArgument, |
| root->appendNew<Const64Value>(proc, Origin(), 1)); |
| root->appendNewControlValue(proc, Return, Origin(), negArgumentMinusOne); |
| CHECK(compileAndRun<int>(proc, a) == -a - 1); |
| } |
| |
| void testSubSub(int a, int b, int c) |
| { |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| root->appendNewControlValue( |
| proc, Return, Origin(), |
| root->appendNew<Value>( |
| proc, Sub, Origin(), |
| root->appendNew<Value>(proc, Sub, Origin(), |
| root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR0), |
| root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR1)), |
| root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR2))); |
| |
| CHECK(compileAndRun<int>(proc, a, b, c) == (a-b)-c); |
| } |
| |
| void testSubSub2(int a, int b, int c) |
| { |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| root->appendNewControlValue( |
| proc, Return, Origin(), |
| root->appendNew<Value>( |
| proc, Sub, Origin(), |
| root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR0), |
| root->appendNew<Value>(proc, Sub, Origin(), |
| root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR1), |
| root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR2)))); |
| |
| CHECK(compileAndRun<int>(proc, a, b, c) == a-(b-c)); |
| } |
| |
| void testSubAdd(int a, int b, int c) |
| { |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| root->appendNewControlValue( |
| proc, Return, Origin(), |
| root->appendNew<Value>( |
| proc, Sub, Origin(), |
| root->appendNew<Value>(proc, Add, Origin(), |
| root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR0), |
| root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR1)), |
| root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR2))); |
| |
| CHECK(compileAndRun<int>(proc, a, b, c) == (a+b)-c); |
| } |
| |
| void testSubFirstNeg(int a, int b) |
| { |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| root->appendNewControlValue( |
| proc, Return, Origin(), |
| root->appendNew<Value>( |
| proc, Sub, Origin(), |
| root->appendNew<Value>(proc, Neg, Origin(), |
| root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR0)), |
| root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR1))); |
| |
| CHECK(compileAndRun<int>(proc, a, b) == (-a)-b); |
| } |
| |
| void testSubImmArg(int a, int b) |
| { |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| root->appendNewControlValue( |
| proc, Return, Origin(), |
| root->appendNew<Value>( |
| proc, Sub, Origin(), |
| root->appendNew<Const64Value>(proc, Origin(), a), |
| root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR0))); |
| |
| CHECK(compileAndRun<int>(proc, b) == a - b); |
| } |
| |
| void testSubArgMem(int64_t a, int64_t b) |
| { |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| Value* address = root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR1); |
| MemoryValue* load = root->appendNew<MemoryValue>(proc, Load, Int64, Origin(), address); |
| Value* result = root->appendNew<Value>(proc, Sub, Origin(), |
| root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR0), |
| load); |
| root->appendNewControlValue(proc, Return, Origin(), result); |
| |
| CHECK(compileAndRun<int64_t>(proc, a, &b) == a - b); |
| } |
| |
| void testSubMemArg(int64_t a, int64_t b) |
| { |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| Value* address = root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR0); |
| MemoryValue* load = root->appendNew<MemoryValue>(proc, Load, Int64, Origin(), address); |
| Value* result = root->appendNew<Value>(proc, Sub, Origin(), |
| load, |
| root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR1)); |
| root->appendNew<MemoryValue>(proc, Store, Origin(), result, address); |
| root->appendNewControlValue(proc, Return, Origin(), root->appendNew<Const32Value>(proc, Origin(), 0)); |
| |
| int64_t inputOutput = a; |
| CHECK(!compileAndRun<int64_t>(proc, &inputOutput, b)); |
| CHECK(inputOutput == a - b); |
| } |
| |
| void testSubImmMem(int64_t a, int64_t b) |
| { |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| Value* address = root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR0); |
| MemoryValue* load = root->appendNew<MemoryValue>(proc, Load, Int64, Origin(), address); |
| Value* result = root->appendNew<Value>(proc, Sub, Origin(), |
| root->appendNew<Const64Value>(proc, Origin(), a), |
| load); |
| root->appendNew<MemoryValue>(proc, Store, Origin(), result, address); |
| root->appendNewControlValue(proc, Return, Origin(), root->appendNew<Const32Value>(proc, Origin(), 0)); |
| |
| int64_t inputOutput = b; |
| CHECK(!compileAndRun<int>(proc, &inputOutput)); |
| CHECK(inputOutput == a - b); |
| } |
| |
| void testSubMemImm(int64_t a, int64_t b) |
| { |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| Value* address = root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR0); |
| MemoryValue* load = root->appendNew<MemoryValue>(proc, Load, Int64, Origin(), address); |
| Value* result = root->appendNew<Value>(proc, Sub, Origin(), |
| load, |
| root->appendNew<Const64Value>(proc, Origin(), b)); |
| root->appendNew<MemoryValue>(proc, Store, Origin(), result, address); |
| root->appendNewControlValue(proc, Return, Origin(), root->appendNew<Const32Value>(proc, Origin(), 0)); |
| |
| int64_t inputOutput = a; |
| CHECK(!compileAndRun<int>(proc, &inputOutput)); |
| CHECK(inputOutput == a - b); |
| } |
| |
| |
| void testSubArgs32(int a, int b) |
| { |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| root->appendNewControlValue( |
| proc, Return, Origin(), |
| root->appendNew<Value>( |
| proc, Sub, Origin(), |
| root->appendNew<Value>( |
| proc, Trunc, Origin(), |
| root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR0)), |
| root->appendNew<Value>( |
| proc, Trunc, Origin(), |
| root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR1)))); |
| |
| CHECK(compileAndRun<int>(proc, a, b) == a - b); |
| } |
| |
| void testSubArgs32ZeroExtend(int a, int b) |
| { |
| Procedure proc; |
| if (proc.optLevel() < 1) |
| return; |
| BasicBlock* root = proc.addBlock(); |
| root->appendNewControlValue( |
| proc, Return, Origin(), |
| root->appendNew<Value>( |
| proc, ZExt32, Origin(), |
| root->appendNew<Value>( |
| proc, Sub, Origin(), |
| root->appendNew<Value>( |
| proc, Trunc, Origin(), |
| root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR0)), |
| root->appendNew<Value>( |
| proc, Trunc, Origin(), |
| root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR1))))); |
| |
| CHECK(compileAndRun<uint64_t>(proc, a, b) == static_cast<uint64_t>(static_cast<uint32_t>(a - b))); |
| } |
| |
| void testSubArgImm32(int a, int b) |
| { |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| root->appendNewControlValue( |
| proc, Return, Origin(), |
| root->appendNew<Value>( |
| proc, Sub, Origin(), |
| root->appendNew<Value>( |
| proc, Trunc, Origin(), |
| root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR0)), |
| root->appendNew<Const32Value>(proc, Origin(), b))); |
| |
| CHECK(compileAndRun<int>(proc, a) == a - b); |
| } |
| |
| void testSubImmArg32(int a, int b) |
| { |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| root->appendNewControlValue( |
| proc, Return, Origin(), |
| root->appendNew<Value>( |
| proc, Sub, Origin(), |
| root->appendNew<Const32Value>(proc, Origin(), a), |
| root->appendNew<Value>( |
| proc, Trunc, Origin(), |
| root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR0)))); |
| |
| CHECK(compileAndRun<int>(proc, b) == a - b); |
| } |
| |
| void testSubMemArg32(int32_t a, int32_t b) |
| { |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| Value* address = root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR0); |
| MemoryValue* load = root->appendNew<MemoryValue>(proc, Load, Int32, Origin(), address); |
| Value* argument = root->appendNew<Value>(proc, Trunc, Origin(), |
| root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR1)); |
| Value* result = root->appendNew<Value>(proc, Sub, Origin(), load, argument); |
| root->appendNew<MemoryValue>(proc, Store, Origin(), result, address); |
| root->appendNewControlValue(proc, Return, Origin(), root->appendNew<Const32Value>(proc, Origin(), 0)); |
| |
| int32_t inputOutput = a; |
| CHECK(!compileAndRun<int32_t>(proc, &inputOutput, b)); |
| CHECK(inputOutput == a - b); |
| } |
| |
| void testSubArgMem32(int32_t a, int32_t b) |
| { |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| Value* address = root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR1); |
| MemoryValue* load = root->appendNew<MemoryValue>(proc, Load, Int32, Origin(), address); |
| Value* argument = root->appendNew<Value>(proc, Trunc, Origin(), |
| root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR0)); |
| Value* result = root->appendNew<Value>(proc, Sub, Origin(), argument, load); |
| root->appendNewControlValue(proc, Return, Origin(), result); |
| |
| CHECK(compileAndRun<int32_t>(proc, a, &b) == a - b); |
| } |
| |
| void testSubImmMem32(int32_t a, int32_t b) |
| { |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| Value* address = root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR0); |
| MemoryValue* load = root->appendNew<MemoryValue>(proc, Load, Int32, Origin(), address); |
| Value* result = root->appendNew<Value>(proc, Sub, Origin(), |
| root->appendNew<Const32Value>(proc, Origin(), a), |
| load); |
| root->appendNew<MemoryValue>(proc, Store, Origin(), result, address); |
| root->appendNewControlValue(proc, Return, Origin(), root->appendNew<Const32Value>(proc, Origin(), 0)); |
| |
| int32_t inputOutput = b; |
| CHECK(!compileAndRun<int>(proc, &inputOutput)); |
| CHECK(inputOutput == a - b); |
| } |
| |
| void testSubMemImm32(int32_t a, int32_t b) |
| { |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| Value* address = root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR0); |
| MemoryValue* load = root->appendNew<MemoryValue>(proc, Load, Int32, Origin(), address); |
| Value* result = root->appendNew<Value>(proc, Sub, Origin(), |
| load, |
| root->appendNew<Const32Value>(proc, Origin(), b)); |
| root->appendNew<MemoryValue>(proc, Store, Origin(), result, address); |
| root->appendNewControlValue(proc, Return, Origin(), root->appendNew<Const32Value>(proc, Origin(), 0)); |
| |
| int32_t inputOutput = a; |
| CHECK(!compileAndRun<int>(proc, &inputOutput)); |
| CHECK(inputOutput == a - b); |
| } |
| |
| void testNegValueSubOne32(int a) |
| { |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| Value* argument = root->appendNew<Value>(proc, Trunc, Origin(), |
| root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR0)); |
| Value* negArgument = root->appendNew<Value>(proc, Sub, Origin(), |
| root->appendNew<Const32Value>(proc, Origin(), 0), |
| argument); |
| Value* negArgumentMinusOne = root->appendNew<Value>(proc, Sub, Origin(), |
| negArgument, |
| root->appendNew<Const32Value>(proc, Origin(), 1)); |
| root->appendNewControlValue(proc, Return, Origin(), negArgumentMinusOne); |
| CHECK(compileAndRun<int>(proc, a) == -a - 1); |
| } |
| |
| void testNegMulArgImm(int64_t a, int64_t b) |
| { |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| Value* argument = root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR0); |
| Value* constant = root->appendNew<Const64Value>(proc, Origin(), b); |
| Value* mul = root->appendNew<Value>(proc, Mul, Origin(), argument, constant); |
| Value* result = root->appendNew<Value>(proc, Neg, Origin(), mul); |
| root->appendNew<Value>(proc, Return, Origin(), result); |
| |
| CHECK(compileAndRun<int64_t>(proc, a) == -(a * b)); |
| } |
| |
| void testSubMulMulArgs(int64_t a, int64_t b, int64_t c) |
| { |
| // We want to check every possible ordering of arguments (to properly check every path in B3ReduceStrength): |
| // ((a * b) - (a * c)) |
| // ((a * b) - (c * a)) |
| // ((b * a) - (a * c)) |
| // ((b * a) - (c * a)) |
| for (int i = 0; i < 4; ++i) { |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| Value* argA = root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR0); |
| Value* argB = root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR1); |
| Value* argC = root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR2); |
| Value* mulAB = i & 2 ? root->appendNew<Value>(proc, Mul, Origin(), argA, argB) |
| : root->appendNew<Value>(proc, Mul, Origin(), argB, argA); |
| Value* mulAC = i & 1 ? root->appendNew<Value>(proc, Mul, Origin(), argA, argC) |
| : root->appendNew<Value>(proc, Mul, Origin(), argC, argA); |
| root->appendNew<Value>(proc, Return, Origin(), |
| root->appendNew<Value>(proc, Sub, Origin(), |
| mulAB, |
| mulAC)); |
| |
| CHECK_EQ(compileAndRun<int64_t>(proc, a, b, c), ((a * b) - (a * c))); |
| } |
| } |
| |
| void testSubArgDouble(double a) |
| { |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| Value* value = root->appendNew<ArgumentRegValue>(proc, Origin(), FPRInfo::argumentFPR0); |
| root->appendNewControlValue( |
| proc, Return, Origin(), |
| root->appendNew<Value>(proc, Sub, Origin(), value, value)); |
| |
| CHECK(isIdentical(compileAndRun<double>(proc, a), a - a)); |
| } |
| |
| void testSubArgsDouble(double a, double b) |
| { |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| Value* valueA = root->appendNew<ArgumentRegValue>(proc, Origin(), FPRInfo::argumentFPR0); |
| Value* valueB = root->appendNew<ArgumentRegValue>(proc, Origin(), FPRInfo::argumentFPR1); |
| root->appendNewControlValue( |
| proc, Return, Origin(), |
| root->appendNew<Value>(proc, Sub, Origin(), valueA, valueB)); |
| |
| CHECK(isIdentical(compileAndRun<double>(proc, a, b), a - b)); |
| } |
| |
| void testSubArgImmDouble(double a, double b) |
| { |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| Value* valueA = root->appendNew<ArgumentRegValue>(proc, Origin(), FPRInfo::argumentFPR0); |
| Value* valueB = root->appendNew<ConstDoubleValue>(proc, Origin(), b); |
| root->appendNewControlValue( |
| proc, Return, Origin(), |
| root->appendNew<Value>(proc, Sub, Origin(), valueA, valueB)); |
| |
| CHECK(isIdentical(compileAndRun<double>(proc, a), a - b)); |
| } |
| |
| void testSubImmArgDouble(double a, double b) |
| { |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| Value* valueA = root->appendNew<ConstDoubleValue>(proc, Origin(), a); |
| Value* valueB = root->appendNew<ArgumentRegValue>(proc, Origin(), FPRInfo::argumentFPR0); |
| root->appendNewControlValue( |
| proc, Return, Origin(), |
| root->appendNew<Value>(proc, Sub, Origin(), valueA, valueB)); |
| |
| CHECK(isIdentical(compileAndRun<double>(proc, b), a - b)); |
| } |
| |
| void testSubImmsDouble(double a, double b) |
| { |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| Value* valueA = root->appendNew<ConstDoubleValue>(proc, Origin(), a); |
| Value* valueB = root->appendNew<ConstDoubleValue>(proc, Origin(), b); |
| root->appendNewControlValue( |
| proc, Return, Origin(), |
| root->appendNew<Value>(proc, Sub, Origin(), valueA, valueB)); |
| |
| CHECK(isIdentical(compileAndRun<double>(proc), a - b)); |
| } |
| |
| void testSubArgFloat(float a) |
| { |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| Value* argument32 = root->appendNew<Value>(proc, Trunc, Origin(), |
| root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR0)); |
| Value* floatValue = root->appendNew<Value>(proc, BitwiseCast, Origin(), argument32); |
| Value* result = root->appendNew<Value>(proc, Sub, Origin(), floatValue, floatValue); |
| Value* result32 = root->appendNew<Value>(proc, BitwiseCast, Origin(), result); |
| root->appendNewControlValue(proc, Return, Origin(), result32); |
| |
| |
| CHECK(isIdentical(compileAndRun<int32_t>(proc, bitwise_cast<int32_t>(a)), bitwise_cast<int32_t>(a - a))); |
| } |
| |
| void testSubArgsFloat(float a, float b) |
| { |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| Value* argument1int32 = root->appendNew<Value>(proc, Trunc, Origin(), |
| root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR0)); |
| Value* argument2int32 = root->appendNew<Value>(proc, Trunc, Origin(), |
| root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR1)); |
| Value* floatValue1 = root->appendNew<Value>(proc, BitwiseCast, Origin(), argument1int32); |
| Value* floatValue2 = root->appendNew<Value>(proc, BitwiseCast, Origin(), argument2int32); |
| Value* result = root->appendNew<Value>(proc, Sub, Origin(), floatValue1, floatValue2); |
| Value* result32 = root->appendNew<Value>(proc, BitwiseCast, Origin(), result); |
| root->appendNewControlValue(proc, Return, Origin(), result32); |
| |
| CHECK(isIdentical(compileAndRun<int32_t>(proc, bitwise_cast<int32_t>(a), bitwise_cast<int32_t>(b)), bitwise_cast<int32_t>(a - b))); |
| } |
| |
| void testSubArgImmFloat(float a, float b) |
| { |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| Value* argument32 = root->appendNew<Value>(proc, Trunc, Origin(), |
| root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR0)); |
| Value* floatValue = root->appendNew<Value>(proc, BitwiseCast, Origin(), argument32); |
| Value* constValue = root->appendNew<ConstFloatValue>(proc, Origin(), b); |
| Value* result = root->appendNew<Value>(proc, Sub, Origin(), floatValue, constValue); |
| Value* result32 = root->appendNew<Value>(proc, BitwiseCast, Origin(), result); |
| root->appendNewControlValue(proc, Return, Origin(), result32); |
| |
| CHECK(isIdentical(compileAndRun<int32_t>(proc, bitwise_cast<int32_t>(a)), bitwise_cast<int32_t>(a - b))); |
| } |
| |
| void testSubImmArgFloat(float a, float b) |
| { |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| Value* argument32 = root->appendNew<Value>(proc, Trunc, Origin(), |
| root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR0)); |
| Value* floatValue = root->appendNew<Value>(proc, BitwiseCast, Origin(), argument32); |
| Value* constValue = root->appendNew<ConstFloatValue>(proc, Origin(), a); |
| Value* result = root->appendNew<Value>(proc, Sub, Origin(), constValue, floatValue); |
| Value* result32 = root->appendNew<Value>(proc, BitwiseCast, Origin(), result); |
| root->appendNewControlValue(proc, Return, Origin(), result32); |
| |
| CHECK(isIdentical(compileAndRun<int32_t>(proc, bitwise_cast<int32_t>(b)), bitwise_cast<int32_t>(a - b))); |
| } |
| |
| void testSubImmsFloat(float a, float b) |
| { |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| Value* constValue1 = root->appendNew<ConstFloatValue>(proc, Origin(), a); |
| Value* constValue2 = root->appendNew<ConstFloatValue>(proc, Origin(), b); |
| Value* result = root->appendNew<Value>(proc, Sub, Origin(), constValue1, constValue2); |
| Value* result32 = root->appendNew<Value>(proc, BitwiseCast, Origin(), result); |
| root->appendNewControlValue(proc, Return, Origin(), result32); |
| |
| CHECK(isIdentical(compileAndRun<int32_t>(proc), bitwise_cast<int32_t>(a - b))); |
| } |
| |
| void testSubArgFloatWithUselessDoubleConversion(float a) |
| { |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| Value* argumentInt32 = root->appendNew<Value>(proc, Trunc, Origin(), |
| root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR0)); |
| Value* floatValue = root->appendNew<Value>(proc, BitwiseCast, Origin(), argumentInt32); |
| Value* asDouble = root->appendNew<Value>(proc, FloatToDouble, Origin(), floatValue); |
| Value* result = root->appendNew<Value>(proc, Sub, Origin(), asDouble, asDouble); |
| Value* floatResult = root->appendNew<Value>(proc, DoubleToFloat, Origin(), result); |
| Value* result32 = root->appendNew<Value>(proc, BitwiseCast, Origin(), floatResult); |
| root->appendNewControlValue(proc, Return, Origin(), result32); |
| |
| CHECK(isIdentical(compileAndRun<int32_t>(proc, bitwise_cast<int32_t>(a)), bitwise_cast<int32_t>(a - a))); |
| } |
| |
| void testSubArgsFloatWithUselessDoubleConversion(float a, float b) |
| { |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| Value* argument1int32 = root->appendNew<Value>(proc, Trunc, Origin(), |
| root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR0)); |
| Value* argument2int32 = root->appendNew<Value>(proc, Trunc, Origin(), |
| root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR1)); |
| Value* floatValue1 = root->appendNew<Value>(proc, BitwiseCast, Origin(), argument1int32); |
| Value* floatValue2 = root->appendNew<Value>(proc, BitwiseCast, Origin(), argument2int32); |
| Value* asDouble1 = root->appendNew<Value>(proc, FloatToDouble, Origin(), floatValue1); |
| Value* asDouble2 = root->appendNew<Value>(proc, FloatToDouble, Origin(), floatValue2); |
| Value* result = root->appendNew<Value>(proc, Sub, Origin(), asDouble1, asDouble2); |
| Value* floatResult = root->appendNew<Value>(proc, DoubleToFloat, Origin(), result); |
| Value* result32 = root->appendNew<Value>(proc, BitwiseCast, Origin(), floatResult); |
| root->appendNewControlValue(proc, Return, Origin(), result32); |
| |
| CHECK(isIdentical(compileAndRun<int32_t>(proc, bitwise_cast<int32_t>(a), bitwise_cast<int32_t>(b)), bitwise_cast<int32_t>(a - b))); |
| } |
| |
| void testSubArgsFloatWithEffectfulDoubleConversion(float a, float b) |
| { |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| Value* argument1int32 = root->appendNew<Value>(proc, Trunc, Origin(), |
| root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR0)); |
| Value* argument2int32 = root->appendNew<Value>(proc, Trunc, Origin(), |
| root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR1)); |
| Value* floatValue1 = root->appendNew<Value>(proc, BitwiseCast, Origin(), argument1int32); |
| Value* floatValue2 = root->appendNew<Value>(proc, BitwiseCast, Origin(), argument2int32); |
| Value* asDouble1 = root->appendNew<Value>(proc, FloatToDouble, Origin(), floatValue1); |
| Value* asDouble2 = root->appendNew<Value>(proc, FloatToDouble, Origin(), floatValue2); |
| Value* result = root->appendNew<Value>(proc, Sub, Origin(), asDouble1, asDouble2); |
| Value* floatResult = root->appendNew<Value>(proc, DoubleToFloat, Origin(), result); |
| Value* doubleSubress = root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR2); |
| root->appendNew<MemoryValue>(proc, Store, Origin(), result, doubleSubress); |
| Value* result32 = root->appendNew<Value>(proc, BitwiseCast, Origin(), floatResult); |
| root->appendNewControlValue(proc, Return, Origin(), result32); |
| |
| double effect = 0; |
| CHECK(isIdentical(compileAndRun<int32_t>(proc, bitwise_cast<int32_t>(a), bitwise_cast<int32_t>(b), &effect), bitwise_cast<int32_t>(a - b))); |
| CHECK(isIdentical(effect, static_cast<double>(a) - static_cast<double>(b))); |
| } |
| |
| void testTernarySubInstructionSelection(B3::Opcode valueModifier, Type valueType, Air::Opcode expectedOpcode) |
| { |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| |
| Value* left = root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR0); |
| Value* right = root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR1); |
| |
| if (valueModifier == Trunc) { |
| left = root->appendNew<Value>(proc, valueModifier, valueType, Origin(), left); |
| right = root->appendNew<Value>(proc, valueModifier, valueType, Origin(), right); |
| } |
| |
| root->appendNewControlValue( |
| proc, Return, Origin(), |
| root->appendNew<Value>(proc, Sub, Origin(), left, right)); |
| |
| lowerToAirForTesting(proc); |
| |
| auto block = proc.code()[0]; |
| unsigned numberOfSubInstructions = 0; |
| for (auto instruction : *block) { |
| if (instruction.kind.opcode == expectedOpcode) { |
| CHECK_EQ(instruction.args.size(), 3ul); |
| CHECK_EQ(instruction.args[0].kind(), Air::Arg::Tmp); |
| CHECK_EQ(instruction.args[1].kind(), Air::Arg::Tmp); |
| CHECK_EQ(instruction.args[2].kind(), Air::Arg::Tmp); |
| numberOfSubInstructions++; |
| } |
| } |
| CHECK_EQ(numberOfSubInstructions, 1ul); |
| } |
| |
| void testNegDouble(double a) |
| { |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| root->appendNewControlValue( |
| proc, Return, Origin(), |
| root->appendNew<Value>( |
| proc, Neg, Origin(), |
| root->appendNew<ArgumentRegValue>(proc, Origin(), FPRInfo::argumentFPR0))); |
| |
| CHECK(isIdentical(compileAndRun<double>(proc, a), -a)); |
| } |
| |
| void testNegFloat(float a) |
| { |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| Value* argument32 = root->appendNew<Value>(proc, Trunc, Origin(), |
| root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR0)); |
| Value* floatValue = root->appendNew<Value>(proc, BitwiseCast, Origin(), argument32); |
| root->appendNewControlValue( |
| proc, Return, Origin(), |
| root->appendNew<Value>(proc, Neg, Origin(), floatValue)); |
| |
| CHECK(isIdentical(compileAndRun<float>(proc, bitwise_cast<int32_t>(a)), -a)); |
| } |
| |
| void testNegFloatWithUselessDoubleConversion(float a) |
| { |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| Value* argumentInt32 = root->appendNew<Value>(proc, Trunc, Origin(), |
| root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR0)); |
| Value* floatValue = root->appendNew<Value>(proc, BitwiseCast, Origin(), argumentInt32); |
| Value* asDouble = root->appendNew<Value>(proc, FloatToDouble, Origin(), floatValue); |
| Value* result = root->appendNew<Value>(proc, Neg, Origin(), asDouble); |
| Value* floatResult = root->appendNew<Value>(proc, DoubleToFloat, Origin(), result); |
| root->appendNewControlValue(proc, Return, Origin(), floatResult); |
| |
| CHECK(isIdentical(compileAndRun<float>(proc, bitwise_cast<int32_t>(a)), -a)); |
| } |
| |
| void testUbfx32ShiftAnd() |
| { |
| // Test Pattern: (src >> lsb) & mask |
| // where: mask = (1 << width) - 1 |
| if (JSC::Options::defaultB3OptLevel() < 2) |
| return; |
| uint32_t src = 0xffffffff; |
| Vector<uint32_t> lsbs = { 1, 14, 30 }; |
| Vector<uint32_t> widths = { 30, 17, 1 }; |
| |
| auto test = [&] (uint32_t lsb, uint32_t mask) -> uint32_t { |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| |
| Value* srcValue = root->appendNew<Value>( |
| proc, Trunc, Origin(), |
| root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR0)); |
| Value* lsbValue = root->appendNew<Const32Value>(proc, Origin(), lsb); |
| Value* maskValue = root->appendNew<Const32Value>(proc, Origin(), mask); |
| |
| Value* left = root->appendNew<Value>(proc, ZShr, Origin(), srcValue, lsbValue); |
| root->appendNewControlValue( |
| proc, Return, Origin(), |
| root->appendNew<Value>(proc, BitAnd, Origin(), left, maskValue)); |
| |
| auto code = compileProc(proc); |
| if (isARM64()) |
| checkUsesInstruction(*code, "ubfx"); |
| return invoke<uint32_t>(*code, src); |
| }; |
| |
| auto generateMask = [&] (uint32_t width) -> uint32_t { |
| return (1U << width) - 1U; |
| }; |
| |
| for (size_t i = 0; i < lsbs.size(); ++i) { |
| uint32_t lsb = lsbs.at(i); |
| uint32_t mask = generateMask(widths.at(i)); |
| CHECK(test(lsb, mask) == ((src >> lsb) & mask)); |
| } |
| } |
| |
| void testUbfx32AndShift() |
| { |
| // Test Pattern: mask & (src >> lsb) |
| // Where: mask = (1 << width) - 1 |
| if (JSC::Options::defaultB3OptLevel() < 2) |
| return; |
| uint32_t src = 0xffffffff; |
| Vector<uint32_t> lsbs = { 1, 14, 30 }; |
| Vector<uint32_t> widths = { 30, 17, 1 }; |
| |
| auto test = [&] (uint32_t lsb, uint32_t mask) -> uint32_t { |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| |
| Value* srcValue = root->appendNew<Value>( |
| proc, Trunc, Origin(), |
| root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR0)); |
| Value* lsbValue = root->appendNew<Const32Value>(proc, Origin(), lsb); |
| Value* maskValue = root->appendNew<Const32Value>(proc, Origin(), mask); |
| |
| Value* right = root->appendNew<Value>(proc, ZShr, Origin(), srcValue, lsbValue); |
| root->appendNewControlValue( |
| proc, Return, Origin(), |
| root->appendNew<Value>(proc, BitAnd, Origin(), maskValue, right)); |
| |
| auto code = compileProc(proc); |
| if (isARM64()) |
| checkUsesInstruction(*code, "ubfx"); |
| return invoke<uint32_t>(*code, src); |
| }; |
| |
| auto generateMask = [&] (uint32_t width) -> uint32_t { |
| return (1U << width) - 1U; |
| }; |
| |
| for (size_t i = 0; i < lsbs.size(); ++i) { |
| uint32_t lsb = lsbs.at(i); |
| uint32_t mask = generateMask(widths.at(i)); |
| CHECK(test(lsb, mask) == (mask & (src >> lsb))); |
| } |
| } |
| |
| void testUbfx64ShiftAnd() |
| { |
| // Test Pattern: (src >> lsb) & mask |
| // where: mask = (1 << width) - 1 |
| if (JSC::Options::defaultB3OptLevel() < 2) |
| return; |
| uint64_t src = 0xffffffffffffffff; |
| Vector<uint64_t> lsbs = { 1, 30, 62 }; |
| Vector<uint64_t> widths = { 62, 33, 1 }; |
| |
| auto test = [&] (uint64_t lsb, uint64_t mask) -> uint64_t { |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| |
| Value* srcValue = root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR0); |
| Value* lsbValue = root->appendNew<Const32Value>(proc, Origin(), lsb); |
| Value* maskValue = root->appendNew<Const64Value>(proc, Origin(), mask); |
| |
| Value* left = root->appendNew<Value>(proc, ZShr, Origin(), srcValue, lsbValue); |
| root->appendNewControlValue( |
| proc, Return, Origin(), |
| root->appendNew<Value>(proc, BitAnd, Origin(), left, maskValue)); |
| |
| auto code = compileProc(proc); |
| if (isARM64()) |
| checkUsesInstruction(*code, "ubfx"); |
| return invoke<uint64_t>(*code, src); |
| }; |
| |
| auto generateMask = [&] (uint64_t width) -> uint64_t { |
| return (1ULL << width) - 1ULL; |
| }; |
| |
| for (size_t i = 0; i < lsbs.size(); ++i) { |
| uint64_t lsb = lsbs.at(i); |
| uint64_t mask = generateMask(widths.at(i)); |
| CHECK(test(lsb, mask) == ((src >> lsb) & mask)); |
| } |
| } |
| |
| void testUbfx64AndShift() |
| { |
| // Test Pattern: mask & (src >> lsb) |
| // Where: mask = (1 << width) - 1 |
| if (JSC::Options::defaultB3OptLevel() < 2) |
| return; |
| uint64_t src = 0xffffffffffffffff; |
| Vector<uint64_t> lsbs = { 1, 30, 62 }; |
| Vector<uint64_t> widths = { 62, 33, 1 }; |
| |
| auto test = [&] (uint64_t lsb, uint64_t mask) -> uint64_t { |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| |
| Value* srcValue = root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR0); |
| Value* lsbValue = root->appendNew<Const32Value>(proc, Origin(), lsb); |
| Value* maskValue = root->appendNew<Const64Value>(proc, Origin(), mask); |
| |
| Value* right = root->appendNew<Value>(proc, ZShr, Origin(), srcValue, lsbValue); |
| root->appendNewControlValue( |
| proc, Return, Origin(), |
| root->appendNew<Value>(proc, BitAnd, Origin(), maskValue, right)); |
| |
| auto code = compileProc(proc); |
| if (isARM64()) |
| checkUsesInstruction(*code, "ubfx"); |
| return invoke<uint64_t>(*code, src); |
| }; |
| |
| auto generateMask = [&] (uint64_t width) -> uint64_t { |
| return (1ULL << width) - 1ULL; |
| }; |
| |
| for (size_t i = 0; i < lsbs.size(); ++i) { |
| uint64_t lsb = lsbs.at(i); |
| uint64_t mask = generateMask(widths.at(i)); |
| CHECK(test(lsb, mask) == (mask & (src >> lsb))); |
| } |
| } |
| |
| void testUbfiz32AndShiftValueMask() |
| { |
| // Test Pattern: d = (n & mask) << lsb |
| // Where: mask = (1 << width) - 1 |
| if (JSC::Options::defaultB3OptLevel() < 2) |
| return; |
| uint32_t n = 0xffffffff; |
| Vector<uint32_t> lsbs = { 1, 14, 30 }; |
| Vector<uint32_t> widths = { 30, 17, 1 }; |
| |
| auto test = [&] (uint32_t lsb, uint32_t mask) -> uint32_t { |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| |
| Value* nValue = root->appendNew<Value>( |
| proc, Trunc, Origin(), |
| root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR0)); |
| Value* lsbValue = root->appendNew<Const32Value>(proc, Origin(), lsb); |
| Value* maskValue = root->appendNew<Const32Value>(proc, Origin(), mask); |
| |
| Value* left = root->appendNew<Value>(proc, BitAnd, Origin(), nValue, maskValue); |
| root->appendNewControlValue( |
| proc, Return, Origin(), |
| root->appendNew<Value>(proc, Shl, Origin(), left, lsbValue)); |
| |
| auto code = compileProc(proc); |
| if (isARM64()) |
| checkUsesInstruction(*code, "ubfiz"); |
| return invoke<uint32_t>(*code, n); |
| }; |
| |
| auto generateMask = [&] (uint32_t width) -> uint32_t { |
| return (1U << width) - 1U; |
| }; |
| |
| for (size_t i = 0; i < lsbs.size(); ++i) { |
| uint32_t lsb = lsbs.at(i); |
| uint32_t mask = generateMask(widths.at(i)); |
| CHECK(test(lsb, mask) == ((n & mask) << lsb)); |
| } |
| } |
| |
| void testUbfiz32AndShiftMaskValue() |
| { |
| // Test Pattern: d = (mask & n) << lsb |
| // Where: mask = (1 << width) - 1 |
| if (JSC::Options::defaultB3OptLevel() < 2) |
| return; |
| uint32_t n = 0xffffffff; |
| Vector<uint32_t> lsbs = { 1, 14, 30 }; |
| Vector<uint32_t> widths = { 30, 17, 1 }; |
| |
| auto test = [&] (uint32_t lsb, uint32_t mask) -> uint32_t { |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| |
| Value* nValue = root->appendNew<Value>( |
| proc, Trunc, Origin(), |
| root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR0)); |
| Value* lsbValue = root->appendNew<Const32Value>(proc, Origin(), lsb); |
| Value* maskValue = root->appendNew<Const32Value>(proc, Origin(), mask); |
| |
| Value* left = root->appendNew<Value>(proc, BitAnd, Origin(), maskValue, nValue); |
| root->appendNewControlValue( |
| proc, Return, Origin(), |
| root->appendNew<Value>(proc, Shl, Origin(), left, lsbValue)); |
| |
| auto code = compileProc(proc); |
| if (isARM64()) |
| checkUsesInstruction(*code, "ubfiz"); |
| return invoke<uint32_t>(*code, n); |
| }; |
| |
| auto generateMask = [&] (uint32_t width) -> uint32_t { |
| return (1U << width) - 1U; |
| }; |
| |
| for (size_t i = 0; i < lsbs.size(); ++i) { |
| uint32_t lsb = lsbs.at(i); |
| uint32_t mask = generateMask(widths.at(i)); |
| CHECK(test(lsb, mask) == ((mask & n) << lsb)); |
| } |
| } |
| |
| void testUbfiz32ShiftAnd() |
| { |
| // Test Pattern: d = (n << lsb) & maskShift |
| // Where: maskShift = mask << lsb |
| // mask = (1 << width) - 1 |
| if (JSC::Options::defaultB3OptLevel() < 2) |
| return; |
| uint32_t n = 0xffffffff; |
| Vector<uint32_t> lsbs = { 1, 14, 30 }; |
| Vector<uint32_t> widths = { 30, 17, 1 }; |
| |
| auto test = [&] (uint32_t lsb, uint32_t maskShift) -> uint32_t { |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| |
| Value* nValue = root->appendNew<Value>( |
| proc, Trunc, Origin(), |
| root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR0)); |
| Value* lsbValue = root->appendNew<Const32Value>(proc, Origin(), lsb); |
| Value* maskShiftValue = root->appendNew<Const32Value>(proc, Origin(), maskShift); |
| |
| Value* left = root->appendNew<Value>(proc, Shl, Origin(), nValue, lsbValue); |
| root->appendNewControlValue( |
| proc, Return, Origin(), |
| root->appendNew<Value>(proc, BitAnd, Origin(), left, maskShiftValue)); |
| |
| auto code = compileProc(proc); |
| if (isARM64()) |
| checkUsesInstruction(*code, "ubfiz"); |
| return invoke<uint32_t>(*code, n); |
| }; |
| |
| auto generateMaskShift = [&] (uint32_t width, uint32_t lsb) -> uint32_t { |
| return ((1U << width) - 1U) << lsb; |
| }; |
| |
| for (size_t i = 0; i < lsbs.size(); ++i) { |
| uint32_t lsb = lsbs.at(i); |
| uint32_t maskShift = generateMaskShift(widths.at(i), lsb); |
| CHECK(test(lsb, maskShift) == ((n << lsb) & maskShift)); |
| } |
| } |
| |
| void testUbfiz32AndShift() |
| { |
| // Test Pattern: d = maskShift & (n << lsb) |
| // Where: maskShift = mask << lsb |
| // mask = (1 << width) - 1 |
| if (JSC::Options::defaultB3OptLevel() < 2) |
| return; |
| uint32_t n = 0xffffffff; |
| Vector<uint32_t> lsbs = { 1, 14, 30 }; |
| Vector<uint32_t> widths = { 30, 17, 1 }; |
| |
| auto test = [&] (uint32_t lsb, uint32_t maskShift) -> uint32_t { |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| |
| Value* nValue = root->appendNew<Value>( |
| proc, Trunc, Origin(), |
| root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR0)); |
| Value* lsbValue = root->appendNew<Const32Value>(proc, Origin(), lsb); |
| Value* maskShiftValue = root->appendNew<Const32Value>(proc, Origin(), maskShift); |
| |
| Value* right = root->appendNew<Value>(proc, Shl, Origin(), nValue, lsbValue); |
| root->appendNewControlValue( |
| proc, Return, Origin(), |
| root->appendNew<Value>(proc, BitAnd, Origin(), maskShiftValue, right)); |
| |
| auto code = compileProc(proc); |
| if (isARM64()) |
| checkUsesInstruction(*code, "ubfiz"); |
| return invoke<uint32_t>(*code, n); |
| }; |
| |
| auto generateMaskShift = [&] (uint32_t width, uint32_t lsb) -> uint32_t { |
| return ((1U << width) - 1U) << lsb; |
| }; |
| |
| for (size_t i = 0; i < lsbs.size(); ++i) { |
| uint32_t lsb = lsbs.at(i); |
| uint32_t maskShift = generateMaskShift(widths.at(i), lsb); |
| CHECK(test(lsb, maskShift) == (maskShift & (n << lsb))); |
| } |
| } |
| |
| void testUbfiz64AndShiftValueMask() |
| { |
| // Test Pattern: d = (n & mask) << lsb |
| // Where: mask = (1 << width) - 1 |
| if (JSC::Options::defaultB3OptLevel() < 2) |
| return; |
| uint64_t n = 0xffffffffffffffff; |
| Vector<uint64_t> lsbs = { 1, 30, 62 }; |
| Vector<uint64_t> widths = { 62, 33, 1 }; |
| |
| auto test = [&] (uint64_t lsb, uint64_t mask) -> uint64_t { |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| |
| Value* nValue = root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR0); |
| Value* lsbValue = root->appendNew<Const32Value>(proc, Origin(), lsb); |
| Value* maskValue = root->appendNew<Const64Value>(proc, Origin(), mask); |
| |
| Value* left = root->appendNew<Value>(proc, BitAnd, Origin(), nValue, maskValue); |
| root->appendNewControlValue( |
| proc, Return, Origin(), |
| root->appendNew<Value>(proc, Shl, Origin(), left, lsbValue)); |
| |
| auto code = compileProc(proc); |
| if (isARM64()) |
| checkUsesInstruction(*code, "ubfiz"); |
| return invoke<uint64_t>(*code, n); |
| }; |
| |
| auto generateMask = [&] (uint64_t width) -> uint64_t { |
| return (1ULL << width) - 1ULL; |
| }; |
| |
| for (size_t i = 0; i < lsbs.size(); ++i) { |
| uint64_t lsb = lsbs.at(i); |
| uint64_t mask = generateMask(widths.at(i)); |
| CHECK(test(lsb, mask) == ((n & mask) << lsb)); |
| } |
| } |
| |
| void testUbfiz64AndShiftMaskValue() |
| { |
| // Test Pattern: d = (mask & n) << lsb |
| // Where: mask = (1 << width) - 1 |
| if (JSC::Options::defaultB3OptLevel() < 2) |
| return; |
| uint64_t n = 0xffffffffffffffff; |
| Vector<uint64_t> lsbs = { 1, 30, 62 }; |
| Vector<uint64_t> widths = { 62, 33, 1 }; |
| |
| auto test = [&] (uint64_t lsb, uint64_t mask) -> uint64_t { |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| |
| Value* nValue = root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR0); |
| Value* lsbValue = root->appendNew<Const32Value>(proc, Origin(), lsb); |
| Value* maskValue = root->appendNew<Const64Value>(proc, Origin(), mask); |
| |
| Value* left = root->appendNew<Value>(proc, BitAnd, Origin(), maskValue, nValue); |
| root->appendNewControlValue( |
| proc, Return, Origin(), |
| root->appendNew<Value>(proc, Shl, Origin(), left, lsbValue)); |
| |
| auto code = compileProc(proc); |
| if (isARM64()) |
| checkUsesInstruction(*code, "ubfiz"); |
| return invoke<uint64_t>(*code, n); |
| }; |
| |
| auto generateMask = [&] (uint64_t width) -> uint64_t { |
| return (1ULL << width) - 1ULL; |
| }; |
| |
| for (size_t i = 0; i < lsbs.size(); ++i) { |
| uint64_t lsb = lsbs.at(i); |
| uint64_t mask = generateMask(widths.at(i)); |
| CHECK(test(lsb, mask) == ((mask & n) << lsb)); |
| } |
| } |
| |
| void testUbfiz64ShiftAnd() |
| { |
| // Test Pattern: d = (n << lsb) & maskShift |
| // Where: maskShift = mask << lsb |
| // mask = (1 << width) - 1 |
| if (JSC::Options::defaultB3OptLevel() < 2) |
| return; |
| uint64_t n = 0xffffffffffffffff; |
| Vector<uint64_t> lsbs = { 1, 30, 62 }; |
| Vector<uint64_t> widths = { 62, 33, 1 }; |
| |
| auto test = [&] (uint64_t lsb, uint64_t maskShift) -> uint64_t { |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| |
| Value* nValue = root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR0); |
| Value* lsbValue = root->appendNew<Const32Value>(proc, Origin(), lsb); |
| Value* maskShiftValue = root->appendNew<Const64Value>(proc, Origin(), maskShift); |
| |
| Value* left = root->appendNew<Value>(proc, Shl, Origin(), nValue, lsbValue); |
| root->appendNewControlValue( |
| proc, Return, Origin(), |
| root->appendNew<Value>(proc, BitAnd, Origin(), left, maskShiftValue)); |
| |
| auto code = compileProc(proc); |
| if (isARM64()) |
| checkUsesInstruction(*code, "ubfiz"); |
| return invoke<uint64_t>(*code, n); |
| }; |
| |
| auto generateMaskShift = [&] (uint64_t width, uint64_t lsb) -> uint64_t { |
| return ((1ULL << width) - 1ULL) << lsb; |
| }; |
| |
| for (size_t i = 0; i < lsbs.size(); ++i) { |
| uint64_t lsb = lsbs.at(i); |
| uint64_t maskShift = generateMaskShift(widths.at(i), lsb); |
| CHECK(test(lsb, maskShift) == ((n << lsb) & maskShift)); |
| } |
| } |
| |
| void testUbfiz64AndShift() |
| { |
| // Test Pattern: d = maskShift & (n << lsb) |
| // Where: maskShift = mask << lsb |
| // mask = (1 << width) - 1 |
| if (JSC::Options::defaultB3OptLevel() < 2) |
| return; |
| uint64_t n = 0xffffffffffffffff; |
| Vector<uint64_t> lsbs = { 1, 30, 62 }; |
| Vector<uint64_t> widths = { 62, 33, 1 }; |
| |
| auto test = [&] (uint64_t lsb, uint64_t maskShift) -> uint64_t { |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| |
| Value* nValue = root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR0); |
| Value* lsbValue = root->appendNew<Const32Value>(proc, Origin(), lsb); |
| Value* maskShiftValue = root->appendNew<Const64Value>(proc, Origin(), maskShift); |
| |
| Value* right = root->appendNew<Value>(proc, Shl, Origin(), nValue, lsbValue); |
| root->appendNewControlValue( |
| proc, Return, Origin(), |
| root->appendNew<Value>(proc, BitAnd, Origin(), maskShiftValue, right)); |
| |
| auto code = compileProc(proc); |
| if (isARM64()) |
| checkUsesInstruction(*code, "ubfiz"); |
| return invoke<uint64_t>(*code, n); |
| }; |
| |
| auto generateMaskShift = [&] (uint64_t width, uint64_t lsb) -> uint64_t { |
| return ((1ULL << width) - 1ULL) << lsb; |
| }; |
| |
| for (size_t i = 0; i < lsbs.size(); ++i) { |
| uint64_t lsb = lsbs.at(i); |
| uint64_t maskShift = generateMaskShift(widths.at(i), lsb); |
| CHECK(test(lsb, maskShift) == (maskShift & (n << lsb))); |
| } |
| } |
| |
| void testInsertBitField32() |
| { |
| if (JSC::Options::defaultB3OptLevel() < 2) |
| return; |
| uint32_t d = 0xf0f0f0f0; |
| uint32_t n = 0xffffffff; |
| Vector<uint32_t> lsbs = { 2, 2, 14, 30, 30 }; |
| Vector<uint32_t> widths = { 30, 3, 17, 1, 2 }; |
| |
| // Test Pattern: d = ((n & mask1) << lsb) | (d & mask2) |
| // Where: mask1 = ((1 << width) - 1) |
| // mask2 = ~(mask1 << lsb) |
| auto test1 = [&] (uint32_t lsb, uint32_t mask1, uint32_t mask2) -> uint32_t { |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| |
| Value* dValue = root->appendNew<Value>( |
| proc, Trunc, Origin(), |
| root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR0)); |
| Value* nValue = root->appendNew<Value>( |
| proc, Trunc, Origin(), |
| root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR1)); |
| Value* lsbValue = root->appendNew<Const32Value>(proc, Origin(), lsb); |
| Value* maskValue1 = root->appendNew<Const32Value>(proc, Origin(), mask1); |
| Value* maskValue2 = root->appendNew<Const32Value>(proc, Origin(), mask2); |
| |
| Value* leftAndValue = root->appendNew<Value>(proc, BitAnd, Origin(), nValue, maskValue1); |
| Value* shiftValue = root->appendNew<Value>(proc, Shl, Origin(), leftAndValue, lsbValue); |
| Value* rightAndValue = root->appendNew<Value>(proc, BitAnd, Origin(), dValue, maskValue2); |
| root->appendNewControlValue( |
| proc, Return, Origin(), |
| root->appendNew<Value>(proc, BitOr, Origin(), shiftValue, rightAndValue)); |
| |
| auto code = compileProc(proc); |
| if (isARM64()) |
| checkUsesInstruction(*code, "bfi"); |
| return invoke<uint32_t>(*code, d, n); |
| }; |
| |
| for (size_t i = 0; i < lsbs.size(); ++i) { |
| uint32_t lsb = lsbs.at(i); |
| uint32_t mask1 = (1U << widths.at(i)) - 1U; |
| uint32_t mask2 = ~(mask1 << lsb); |
| CHECK(test1(lsb, mask1, mask2) == (((n & mask1) << lsb) | (d & mask2))); |
| } |
| |
| // Test Pattern: d = (d & mask2) | ((n & mask1) << lsb) |
| // Where: mask1 = ((1 << width) - 1) |
| // mask2 = ~(mask1 << lsb) |
| auto test2 = [&] (uint32_t lsb, uint32_t mask1, uint32_t mask2) -> uint32_t { |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| |
| Value* dValue = root->appendNew<Value>( |
| proc, Trunc, Origin(), |
| root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR0)); |
| Value* nValue = root->appendNew<Value>( |
| proc, Trunc, Origin(), |
| root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR1)); |
| Value* lsbValue = root->appendNew<Const32Value>(proc, Origin(), lsb); |
| Value* maskValue1 = root->appendNew<Const32Value>(proc, Origin(), mask1); |
| Value* maskValue2 = root->appendNew<Const32Value>(proc, Origin(), mask2); |
| |
| Value* leftAndValue = root->appendNew<Value>(proc, BitAnd, Origin(), dValue, maskValue2); |
| Value* rightAndValue = root->appendNew<Value>(proc, BitAnd, Origin(), nValue, maskValue1); |
| Value* shiftValue = root->appendNew<Value>(proc, Shl, Origin(), rightAndValue, lsbValue); |
| root->appendNewControlValue( |
| proc, Return, Origin(), |
| root->appendNew<Value>(proc, BitOr, Origin(), leftAndValue, shiftValue)); |
| |
| auto code = compileProc(proc); |
| if (isARM64()) |
| checkUsesInstruction(*code, "bfi"); |
| return invoke<uint32_t>(*code, d, n); |
| }; |
| |
| for (size_t i = 0; i < lsbs.size(); ++i) { |
| uint32_t lsb = lsbs.at(i); |
| uint32_t mask1 = (1U << widths.at(i)) - 1U; |
| uint32_t mask2 = ~(mask1 << lsb); |
| CHECK(test2(lsb, mask1, mask2) == ((d & mask2) | ((n & mask1) << lsb))); |
| } |
| |
| // Test use role on destination register of BFI |
| uint32_t dA = 0x0000f0f0; |
| uint32_t dB = 0xf0f00000; |
| |
| auto test3 = [&] (uint32_t lsb, uint32_t mask1, uint32_t mask2) -> uint32_t { |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| |
| Value* dAValue = root->appendNew<Value>( |
| proc, Trunc, Origin(), |
| root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR0)); |
| Value* dBValue = root->appendNew<Value>( |
| proc, Trunc, Origin(), |
| root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR1)); |
| Value* nValue = root->appendNew<Value>( |
| proc, Trunc, Origin(), |
| root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR2)); |
| Value* lsbValue = root->appendNew<Const32Value>(proc, Origin(), lsb); |
| Value* maskValue1 = root->appendNew<Const32Value>(proc, Origin(), mask1); |
| Value* maskValue2 = root->appendNew<Const32Value>(proc, Origin(), mask2); |
| |
| // d = dA + dB |
| Value* dValue = root->appendNew<Value>(proc, Add, Origin(), dAValue, dBValue); |
| |
| // d = (d & mask2) | ((n & mask1) << lsb) |
| Value* leftAndValue = root->appendNew<Value>(proc, BitAnd, Origin(), nValue, maskValue1); |
| Value* shiftValue = root->appendNew<Value>(proc, Shl, Origin(), leftAndValue, lsbValue); |
| Value* rightAndValue = root->appendNew<Value>(proc, BitAnd, Origin(), dValue, maskValue2); |
| Value* orValue = root->appendNew<Value>(proc, BitOr, Origin(), shiftValue, rightAndValue); |
| |
| // v3 = ((mask1 + mask2) + dB) + dA |
| Value* value1 = root->appendNew<Value>(proc, Add, Origin(), maskValue1, maskValue2); |
| Value* value2 = root->appendNew<Value>(proc, Add, Origin(), value1, dBValue); |
| Value* value3 = root->appendNew<Value>(proc, Add, Origin(), value2, dAValue); |
| |
| root->appendNewControlValue( |
| proc, Return, Origin(), |
| root->appendNew<Value>(proc, Add, Origin(), value3, orValue)); |
| |
| auto code = compileProc(proc); |
| if (isARM64()) |
| checkUsesInstruction(*code, "bfi"); |
| return invoke<uint32_t>(*code, dA, dB, n); |
| }; |
| |
| for (size_t i = 0; i < lsbs.size(); ++i) { |
| uint32_t lsb = lsbs.at(i); |
| uint32_t mask1 = (1U << widths.at(i)) - 1U; |
| uint32_t mask2 = ~(mask1 << lsb); |
| |
| uint32_t lhs3 = test3(lsb, mask1, mask2); |
| uint32_t dv = dA + dB; |
| dv = (dv & mask2) | ((n & mask1) << lsb); |
| uint32_t v3 = ((mask1 + mask2) + dB) + dA; |
| uint32_t rhs3 = v3 + dv; |
| CHECK(lhs3 == rhs3); |
| } |
| } |
| |
| void testInsertBitField64() |
| { |
| if (JSC::Options::defaultB3OptLevel() < 2) |
| return; |
| uint64_t d = 0xf0f0f0f0f0f0f0f0; |
| uint64_t n = 0xffffffffffffffff; |
| Vector<uint64_t> lsbs = { 2, 30, 14, 62, 62 }; |
| Vector<uint64_t> widths = { 62, 33, 17, 1, 2 }; |
| |
| // Test Pattern: d = ((n & mask1) << lsb) | (d & mask2) |
| // Where: mask1 = ((1 << width) - 1) |
| // mask2 = ~(mask1 << lsb) |
| auto test1 = [&] (uint64_t lsb, uint64_t mask1, uint64_t mask2) -> uint64_t { |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| |
| Value* dValue = root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR0); |
| Value* nValue = root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR1); |
| Value* lsbValue = root->appendNew<Const32Value>(proc, Origin(), lsb); |
| Value* maskValue1 = root->appendNew<Const64Value>(proc, Origin(), mask1); |
| Value* maskValue2 = root->appendNew<Const64Value>(proc, Origin(), mask2); |
| |
| Value* leftAndValue = root->appendNew<Value>(proc, BitAnd, Origin(), nValue, maskValue1); |
| Value* shiftValue = root->appendNew<Value>(proc, Shl, Origin(), leftAndValue, lsbValue); |
| Value* rightAndValue = root->appendNew<Value>(proc, BitAnd, Origin(), dValue, maskValue2); |
| root->appendNewControlValue( |
| proc, Return, Origin(), |
| root->appendNew<Value>(proc, BitOr, Origin(), shiftValue, rightAndValue)); |
| |
| auto code = compileProc(proc); |
| if (isARM64()) |
| checkUsesInstruction(*code, "bfi"); |
| return invoke<uint64_t>(*code, d, n); |
| }; |
| |
| // Test Pattern: d = (d & mask2) | ((n & mask1) << lsb) |
| // Where: mask1 = ((1 << width) - 1) |
| // mask2 = ~(mask1 << lsb) |
| auto test2 = [&] (uint64_t lsb, uint64_t mask1, uint64_t mask2) -> uint64_t { |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| |
| Value* dValue = root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR0); |
| Value* nValue = root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR1); |
| Value* lsbValue = root->appendNew<Const32Value>(proc, Origin(), lsb); |
| Value* maskValue1 = root->appendNew<Const64Value>(proc, Origin(), mask1); |
| Value* maskValue2 = root->appendNew<Const64Value>(proc, Origin(), mask2); |
| |
| Value* leftAndValue = root->appendNew<Value>(proc, BitAnd, Origin(), dValue, maskValue2); |
| Value* rightAndValue = root->appendNew<Value>(proc, BitAnd, Origin(), nValue, maskValue1); |
| Value* shiftValue = root->appendNew<Value>(proc, Shl, Origin(), rightAndValue, lsbValue); |
| root->appendNewControlValue( |
| proc, Return, Origin(), |
| root->appendNew<Value>(proc, BitOr, Origin(), leftAndValue, shiftValue)); |
| |
| auto code = compileProc(proc); |
| if (isARM64()) |
| checkUsesInstruction(*code, "bfi"); |
| return invoke<uint64_t>(*code, d, n); |
| }; |
| |
| for (size_t i = 0; i < lsbs.size(); ++i) { |
| uint64_t lsb = lsbs.at(i); |
| uint64_t mask1 = (1ULL << widths.at(i)) - 1ULL; |
| uint64_t mask2 = ~(mask1 << lsb); |
| CHECK(test1(lsb, mask1, mask2) == (((n & mask1) << lsb) | (d & mask2))); |
| CHECK(test2(lsb, mask1, mask2) == ((d & mask2) | ((n & mask1) << lsb))); |
| } |
| |
| // Test use role on destination register of BFI |
| uint64_t dA = 0x00000000f0f0f0f0; |
| uint64_t dB = 0xf0f0f0f000000000; |
| |
| auto test3 = [&] (uint64_t lsb, uint64_t mask1, uint64_t mask2) -> uint64_t { |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| |
| Value* dAValue = root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR0); |
| Value* dBValue = root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR1); |
| Value* nValue = root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR2); |
| Value* lsbValue = root->appendNew<Const32Value>(proc, Origin(), lsb); |
| Value* maskValue1 = root->appendNew<Const64Value>(proc, Origin(), mask1); |
| Value* maskValue2 = root->appendNew<Const64Value>(proc, Origin(), mask2); |
| |
| // d = dA + dB |
| Value* dValue = root->appendNew<Value>(proc, Add, Origin(), dAValue, dBValue); |
| |
| // d = (d & mask2) | ((n & mask1) << lsb) |
| Value* leftAndValue = root->appendNew<Value>(proc, BitAnd, Origin(), nValue, maskValue1); |
| Value* shiftValue = root->appendNew<Value>(proc, Shl, Origin(), leftAndValue, lsbValue); |
| Value* rightAndValue = root->appendNew<Value>(proc, BitAnd, Origin(), dValue, maskValue2); |
| Value* orValue = root->appendNew<Value>(proc, BitOr, Origin(), shiftValue, rightAndValue); |
| |
| // v3 = ((mask1 + mask2) + dB) + dA |
| Value* value1 = root->appendNew<Value>(proc, Add, Origin(), maskValue1, maskValue2); |
| Value* value2 = root->appendNew<Value>(proc, Add, Origin(), value1, dBValue); |
| Value* value3 = root->appendNew<Value>(proc, Add, Origin(), value2, dAValue); |
| |
| root->appendNewControlValue( |
| proc, Return, Origin(), |
| root->appendNew<Value>(proc, Add, Origin(), value3, orValue)); |
| |
| auto code = compileProc(proc); |
| if (isARM64()) |
| checkUsesInstruction(*code, "bfi"); |
| return invoke<uint64_t>(*code, dA, dB, n); |
| }; |
| |
| for (size_t i = 0; i < lsbs.size(); ++i) { |
| uint64_t lsb = lsbs.at(i); |
| uint64_t mask1 = (1ULL << widths.at(i)) - 1ULL; |
| uint64_t mask2 = ~(mask1 << lsb); |
| |
| uint64_t lhs3 = test3(lsb, mask1, mask2); |
| uint64_t dv = dA + dB; |
| dv = (dv & mask2) | ((n & mask1) << lsb); |
| uint64_t v3 = ((mask1 + mask2) + dB) + dA; |
| uint64_t rhs3 = v3 + dv; |
| CHECK(lhs3 == rhs3); |
| } |
| } |
| |
| void testExtractInsertBitfieldAtLowEnd32() |
| { |
| if (JSC::Options::defaultB3OptLevel() < 2) |
| return; |
| uint32_t d = 0xf0f0f0f0; |
| uint32_t n = 0xffffffff; |
| Vector<uint32_t> lsbs = { 1, 10, 14, 30 }; |
| Vector<uint32_t> widths = { 30, 11, 17, 1 }; |
| |
| // BFXIL Pattern: d = ((n >> lsb) & mask1) | (d & mask2) |
| // Where: mask1 = ((1 << width) - 1) |
| // mask2 = ~mask1 |
| auto test1 = [&] (uint32_t lsb, uint32_t mask1, uint32_t mask2) -> uint32_t { |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| |
| Value* dValue = root->appendNew<Value>( |
| proc, Trunc, Origin(), |
| root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR0)); |
| Value* nValue = root->appendNew<Value>( |
| proc, Trunc, Origin(), |
| root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR1)); |
| Value* lsbValue = root->appendNew<Const32Value>(proc, Origin(), lsb); |
| Value* maskValue1 = root->appendNew<Const32Value>(proc, Origin(), mask1); |
| Value* maskValue2 = root->appendNew<Const32Value>(proc, Origin(), mask2); |
| |
| Value* shiftValue = root->appendNew<Value>(proc, ZShr, Origin(), nValue, lsbValue); |
| Value* leftAndValue = root->appendNew<Value>(proc, BitAnd, Origin(), shiftValue, maskValue1); |
| Value* rightAndValue = root->appendNew<Value>(proc, BitAnd, Origin(), dValue, maskValue2); |
| root->appendNewControlValue( |
| proc, Return, Origin(), |
| root->appendNew<Value>(proc, BitOr, Origin(), leftAndValue, rightAndValue)); |
| |
| auto code = compileProc(proc); |
| if (isARM64()) |
| checkUsesInstruction(*code, "bfxil"); |
| return invoke<uint32_t>(*code, d, n); |
| }; |
| |
| for (size_t i = 0; i < lsbs.size(); ++i) { |
| uint32_t lsb = lsbs.at(i); |
| uint32_t mask1 = (1U << widths.at(i)) - 1U; |
| uint32_t mask2 = ~mask1; |
| CHECK(test1(lsb, mask1, mask2) == (((n >> lsb) & mask1) | (d & mask2))); |
| } |
| |
| // BFXIL Pattern: d = ((n & mask1) >> lsb) | (d & mask2) |
| // Where: mask1 = ((1 << width) - 1) << lsb |
| // mask2 = ~(mask1 >> lsb) |
| auto test2 = [&] (uint32_t lsb, uint32_t mask1, uint32_t mask2) -> uint32_t { |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| |
| Value* dValue = root->appendNew<Value>( |
| proc, Trunc, Origin(), |
| root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR0)); |
| Value* nValue = root->appendNew<Value>( |
| proc, Trunc, Origin(), |
| root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR1)); |
| Value* lsbValue = root->appendNew<Const32Value>(proc, Origin(), lsb); |
| Value* maskValue1 = root->appendNew<Const32Value>(proc, Origin(), mask1); |
| Value* maskValue2 = root->appendNew<Const32Value>(proc, Origin(), mask2); |
| |
| Value* leftAndValue = root->appendNew<Value>(proc, BitAnd, Origin(), nValue, maskValue1); |
| Value* rightAndValue = root->appendNew<Value>(proc, BitAnd, Origin(), dValue, maskValue2); |
| Value* shiftValue = root->appendNew<Value>(proc, ZShr, Origin(), leftAndValue, lsbValue); |
| root->appendNewControlValue( |
| proc, Return, Origin(), |
| root->appendNew<Value>(proc, BitOr, Origin(), shiftValue, rightAndValue)); |
| |
| auto code = compileProc(proc); |
| if (isARM64()) |
| checkUsesInstruction(*code, "bfxil"); |
| return invoke<uint32_t>(*code, d, n); |
| }; |
| |
| for (size_t i = 0; i < lsbs.size(); ++i) { |
| uint32_t lsb = lsbs.at(i); |
| uint32_t mask1 = ((1U << widths.at(i)) - 1U) << lsb; |
| uint32_t mask2 = ~(mask1 >> lsb); |
| CHECK(test2(lsb, mask1, mask2) == (((n & mask1) >> lsb) | (d & mask2))); |
| } |
| |
| // Test use role on destination register of BFXIL |
| uint32_t dA = 0x0000f0f0; |
| uint32_t dB = 0xf0f00000; |
| |
| auto test3 = [&] (uint32_t lsb, uint32_t mask1, uint32_t mask2) -> uint32_t { |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| |
| Value* dAValue = root->appendNew<Value>( |
| proc, Trunc, Origin(), |
| root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR0)); |
| Value* dBValue = root->appendNew<Value>( |
| proc, Trunc, Origin(), |
| root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR1)); |
| Value* nValue = root->appendNew<Value>( |
| proc, Trunc, Origin(), |
| root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR2)); |
| Value* lsbValue = root->appendNew<Const32Value>(proc, Origin(), lsb); |
| Value* maskValue1 = root->appendNew<Const32Value>(proc, Origin(), mask1); |
| Value* maskValue2 = root->appendNew<Const32Value>(proc, Origin(), mask2); |
| |
| // d = dA + dB |
| Value* dValue = root->appendNew<Value>(proc, Add, Origin(), dAValue, dBValue); |
| |
| // d = d = ((n >> lsb) & mask1) | (d & mask2) |
| Value* shiftValue = root->appendNew<Value>(proc, ZShr, Origin(), nValue, lsbValue); |
| Value* leftAndValue = root->appendNew<Value>(proc, BitAnd, Origin(), shiftValue, maskValue1); |
| Value* rightAndValue = root->appendNew<Value>(proc, BitAnd, Origin(), dValue, maskValue2); |
| Value* orValue = root->appendNew<Value>(proc, BitOr, Origin(), leftAndValue, rightAndValue); |
| |
| // v3 = ((mask1 + mask2) + dB) + dA |
| Value* value1 = root->appendNew<Value>(proc, Add, Origin(), maskValue1, maskValue2); |
| Value* value2 = root->appendNew<Value>(proc, Add, Origin(), value1, dBValue); |
| Value* value3 = root->appendNew<Value>(proc, Add, Origin(), value2, dAValue); |
| |
| root->appendNewControlValue( |
| proc, Return, Origin(), |
| root->appendNew<Value>(proc, Add, Origin(), value3, orValue)); |
| |
| auto code = compileProc(proc); |
| if (isARM64()) |
| checkUsesInstruction(*code, "bfxil"); |
| return invoke<uint32_t>(*code, dA, dB, n); |
| }; |
| |
| for (size_t i = 0; i < lsbs.size(); ++i) { |
| uint32_t lsb = lsbs.at(i); |
| uint32_t mask1 = (1U << widths.at(i)) - 1U; |
| uint32_t mask2 = ~mask1; |
| |
| uint32_t lhs3 = test3(lsb, mask1, mask2); |
| uint32_t dv = dA + dB; |
| dv = ((n >> lsb) & mask1) | (dv & mask2); |
| uint32_t v3 = ((mask1 + mask2) + dB) + dA; |
| uint32_t rhs3 = v3 + dv; |
| CHECK(lhs3 == rhs3); |
| } |
| } |
| |
| void testExtractInsertBitfieldAtLowEnd64() |
| { |
| if (JSC::Options::defaultB3OptLevel() < 2) |
| return; |
| uint64_t d = 0xf0f0f0f0f0f0f0f0; |
| uint64_t n = 0xffffffffffffffff; |
| Vector<uint64_t> lsbs = { 1, 30, 14, 62 }; |
| Vector<uint64_t> widths = { 62, 33, 17, 1 }; |
| |
| // BFXIL Pattern: d = ((n >> lsb) & mask1) | (d & mask2) |
| // Where: mask1 = ((1 << width) - 1) |
| // mask2 = ~mask1 |
| auto test1 = [&] (uint64_t lsb, uint64_t mask1, uint64_t mask2) -> uint64_t { |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| |
| Value* dValue = root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR0); |
| Value* nValue = root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR1); |
| Value* lsbValue = root->appendNew<Const32Value>(proc, Origin(), lsb); |
| Value* maskValue1 = root->appendNew<Const64Value>(proc, Origin(), mask1); |
| Value* maskValue2 = root->appendNew<Const64Value>(proc, Origin(), mask2); |
| |
| Value* shiftValue = root->appendNew<Value>(proc, ZShr, Origin(), nValue, lsbValue); |
| Value* leftAndValue = root->appendNew<Value>(proc, BitAnd, Origin(), shiftValue, maskValue1); |
| Value* rightAndValue = root->appendNew<Value>(proc, BitAnd, Origin(), dValue, maskValue2); |
| root->appendNewControlValue( |
| proc, Return, Origin(), |
| root->appendNew<Value>(proc, BitOr, Origin(), leftAndValue, rightAndValue)); |
| |
| auto code = compileProc(proc); |
| if (isARM64()) |
| checkUsesInstruction(*code, "bfxil"); |
| return invoke<uint64_t>(*code, d, n); |
| }; |
| |
| for (size_t i = 0; i < lsbs.size(); ++i) { |
| uint64_t lsb = lsbs.at(i); |
| uint64_t mask1 = (1ULL << widths.at(i)) - 1ULL; |
| uint64_t mask2 = ~mask1; |
| CHECK(test1(lsb, mask1, mask2) == (((n >> lsb) & mask1) | (d & mask2))); |
| } |
| |
| // BFXIL Pattern: d = ((n & mask1) >> lsb) | (d & mask2) |
| // Where: mask1 = ((1 << width) - 1) << lsb |
| // mask2 = ~(mask1 >> lsb) |
| auto test2 = [&] (uint64_t lsb, uint64_t mask1, uint64_t mask2) -> uint64_t { |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| |
| Value* dValue = root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR0); |
| Value* nValue = root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR1); |
| Value* lsbValue = root->appendNew<Const32Value>(proc, Origin(), lsb); |
| Value* maskValue1 = root->appendNew<Const64Value>(proc, Origin(), mask1); |
| Value* maskValue2 = root->appendNew<Const64Value>(proc, Origin(), mask2); |
| |
| Value* leftAndValue = root->appendNew<Value>(proc, BitAnd, Origin(), nValue, maskValue1); |
| Value* rightAndValue = root->appendNew<Value>(proc, BitAnd, Origin(), dValue, maskValue2); |
| Value* shiftValue = root->appendNew<Value>(proc, ZShr, Origin(), leftAndValue, lsbValue); |
| root->appendNewControlValue( |
| proc, Return, Origin(), |
| root->appendNew<Value>(proc, BitOr, Origin(), shiftValue, rightAndValue)); |
| |
| auto code = compileProc(proc); |
| if (isARM64()) |
| checkUsesInstruction(*code, "bfxil"); |
| return invoke<uint64_t>(*code, d, n); |
| }; |
| |
| for (size_t i = 0; i < lsbs.size(); ++i) { |
| uint64_t lsb = lsbs.at(i); |
| uint64_t mask1 = ((1ULL << widths.at(i)) - 1ULL) << lsb; |
| uint64_t mask2 = ~(mask1 >> lsb); |
| CHECK(test2(lsb, mask1, mask2) == (((n & mask1) >> lsb) | (d & mask2))); |
| } |
| |
| // Test use role on destination register of BFXIL |
| uint64_t dA = 0x00000000f0f0f0f0; |
| uint64_t dB = 0xf0f0f0f000000000; |
| |
| auto test3 = [&] (uint64_t lsb, uint64_t mask1, uint64_t mask2) -> uint64_t { |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| |
| Value* dAValue = root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR0); |
| Value* dBValue = root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR1); |
| Value* nValue = root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR2); |
| Value* lsbValue = root->appendNew<Const32Value>(proc, Origin(), lsb); |
| Value* maskValue1 = root->appendNew<Const64Value>(proc, Origin(), mask1); |
| Value* maskValue2 = root->appendNew<Const64Value>(proc, Origin(), mask2); |
| |
| // d = dA + dB |
| Value* dValue = root->appendNew<Value>(proc, Add, Origin(), dAValue, dBValue); |
| |
| // d = d = ((n >> lsb) & mask1) | (d & mask2) |
| Value* shiftValue = root->appendNew<Value>(proc, ZShr, Origin(), nValue, lsbValue); |
| Value* leftAndValue = root->appendNew<Value>(proc, BitAnd, Origin(), shiftValue, maskValue1); |
| Value* rightAndValue = root->appendNew<Value>(proc, BitAnd, Origin(), dValue, maskValue2); |
| Value* orValue = root->appendNew<Value>(proc, BitOr, Origin(), leftAndValue, rightAndValue); |
| |
| // v3 = ((mask1 + mask2) + dB) + dA |
| Value* value1 = root->appendNew<Value>(proc, Add, Origin(), maskValue1, maskValue2); |
| Value* value2 = root->appendNew<Value>(proc, Add, Origin(), value1, dBValue); |
| Value* value3 = root->appendNew<Value>(proc, Add, Origin(), value2, dAValue); |
| |
| root->appendNewControlValue( |
| proc, Return, Origin(), |
| root->appendNew<Value>(proc, Add, Origin(), value3, orValue)); |
| |
| auto code = compileProc(proc); |
| if (isARM64()) |
| checkUsesInstruction(*code, "bfxil"); |
| return invoke<uint64_t>(*code, dA, dB, n); |
| }; |
| |
| for (size_t i = 0; i < lsbs.size(); ++i) { |
| uint64_t lsb = lsbs.at(i); |
| uint64_t mask1 = (1ULL << widths.at(i)) - 1ULL; |
| uint64_t mask2 = ~mask1; |
| |
| uint64_t lhs3 = test3(lsb, mask1, mask2); |
| uint64_t dv = dA + dB; |
| dv = ((n >> lsb) & mask1) | (dv & mask2); |
| uint64_t v3 = ((mask1 + mask2) + dB) + dA; |
| uint64_t rhs3 = v3 + dv; |
| CHECK(lhs3 == rhs3); |
| } |
| } |
| |
| void testBIC32() |
| { |
| if (JSC::Options::defaultB3OptLevel() < 2) |
| return; |
| |
| // Test Pattern: d = n & (-m - 1) |
| auto test1 = [&] (int32_t n, int32_t m) -> int32_t { |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| |
| Value* nValue = root->appendNew<Value>( |
| proc, Trunc, Origin(), |
| root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR0)); |
| Value* mValue = root->appendNew<Value>( |
| proc, Trunc, Origin(), |
| root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR1)); |
| Value* const1 = root->appendNew<Const32Value>(proc, Origin(), 1); |
| |
| Value* negValue = root->appendNew<Value>(proc, Neg, Origin(), mValue); |
| Value* subValue = root->appendNew<Value>(proc, Sub, Origin(), negValue, const1); |
| root->appendNewControlValue( |
| proc, Return, Origin(), |
| root->appendNew<Value>(proc, BitAnd, Origin(), nValue, subValue)); |
| |
| auto code = compileProc(proc); |
| if (isARM64()) |
| checkUsesInstruction(*code, "bic"); |
| return invoke<int32_t>(*code, n, m); |
| }; |
| |
| // Test Pattern: d = n & (m ^ -1) |
| auto test2 = [&] (int32_t n, int32_t m) -> int32_t { |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| |
| Value* nValue = root->appendNew<Value>( |
| proc, Trunc, Origin(), |
| root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR0)); |
| Value* mValue = root->appendNew<Value>( |
| proc, Trunc, Origin(), |
| root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR1)); |
| Value* minusOneValue = root->appendNew<Const32Value>(proc, Origin(), -1); |
| |
| Value* xorValue = root->appendNew<Value>(proc, BitXor, Origin(), mValue, minusOneValue); |
| root->appendNewControlValue( |
| proc, Return, Origin(), |
| root->appendNew<Value>(proc, BitAnd, Origin(), nValue, xorValue)); |
| |
| auto code = compileProc(proc); |
| if (isARM64()) |
| checkUsesInstruction(*code, "bic"); |
| return invoke<int32_t>(*code, n, m); |
| }; |
| |
| for (auto n : int32Operands()) { |
| for (auto m : int32Operands()) { |
| CHECK(test1(n.value, m.value) == (n.value & (-m.value - 1))); |
| CHECK(test2(n.value, m.value) == (n.value & (m.value ^ -1))); |
| } |
| } |
| } |
| |
| void testBIC64() |
| { |
| if (JSC::Options::defaultB3OptLevel() < 2) |
| return; |
| |
| // Test Pattern: d = n & (-m - 1) |
| auto test1 = [&] (int64_t n, int64_t m) -> int64_t { |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| |
| Value* nValue = root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR0); |
| Value* mValue = root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR1); |
| Value* const1 = root->appendNew<Const64Value>(proc, Origin(), 1); |
| |
| Value* negValue = root->appendNew<Value>(proc, Neg, Origin(), mValue); |
| Value* subValue = root->appendNew<Value>(proc, Sub, Origin(), negValue, const1); |
| root->appendNewControlValue( |
| proc, Return, Origin(), |
| root->appendNew<Value>(proc, BitAnd, Origin(), nValue, subValue)); |
| |
| auto code = compileProc(proc); |
| if (isARM64()) |
| checkUsesInstruction(*code, "bic"); |
| return invoke<int64_t>(*code, n, m); |
| }; |
| |
| // Test Pattern: d = n & (m ^ -1) |
| auto test2 = [&] (int64_t n, int64_t m) -> int64_t { |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| |
| Value* nValue = root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR0); |
| Value* mValue = root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR1); |
| Value* minusOneValue = root->appendNew<Const64Value>(proc, Origin(), -1); |
| |
| Value* xorValue = root->appendNew<Value>(proc, BitXor, Origin(), mValue, minusOneValue); |
| root->appendNewControlValue( |
| proc, Return, Origin(), |
| root->appendNew<Value>(proc, BitAnd, Origin(), nValue, xorValue)); |
| |
| auto code = compileProc(proc); |
| if (isARM64()) |
| checkUsesInstruction(*code, "bic"); |
| return invoke<int64_t>(*code, n, m); |
| }; |
| |
| for (auto n : int64Operands()) { |
| for (auto m : int64Operands()) { |
| CHECK(test1(n.value, m.value) == (n.value & (-m.value - 1LL))); |
| CHECK(test2(n.value, m.value) == (n.value & (m.value ^ -1LL))); |
| } |
| } |
| } |
| |
| void testOrNot32() |
| { |
| if (JSC::Options::defaultB3OptLevel() < 2) |
| return; |
| |
| // Test Pattern: d = n | (-m - 1) |
| auto test1 = [&] (int32_t n, int32_t m) -> int32_t { |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| |
| Value* nValue = root->appendNew<Value>( |
| proc, Trunc, Origin(), |
| root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR0)); |
| Value* mValue = root->appendNew<Value>( |
| proc, Trunc, Origin(), |
| root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR1)); |
| Value* const1 = root->appendNew<Const32Value>(proc, Origin(), 1); |
| |
| Value* negValue = root->appendNew<Value>(proc, Neg, Origin(), mValue); |
| Value* subValue = root->appendNew<Value>(proc, Sub, Origin(), negValue, const1); |
| root->appendNewControlValue( |
| proc, Return, Origin(), |
| root->appendNew<Value>(proc, BitOr, Origin(), nValue, subValue)); |
| |
| auto code = compileProc(proc); |
| |
| if (isARM64()) |
| checkUsesInstruction(*code, "orn"); |
| return invoke<int32_t>(*code, n, m); |
| }; |
| |
| // Test Pattern: d = n | (m ^ -1) |
| auto test2 = [&] (int32_t n, int32_t m) -> int32_t { |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| |
| Value* nValue = root->appendNew<Value>( |
| proc, Trunc, Origin(), |
| root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR0)); |
| Value* mValue = root->appendNew<Value>( |
| proc, Trunc, Origin(), |
| root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR1)); |
| Value* minusOneValue = root->appendNew<Const32Value>(proc, Origin(), -1); |
| |
| Value* xorValue = root->appendNew<Value>(proc, BitXor, Origin(), mValue, minusOneValue); |
| root->appendNewControlValue( |
| proc, Return, Origin(), |
| root->appendNew<Value>(proc, BitOr, Origin(), nValue, xorValue)); |
| |
| auto code = compileProc(proc); |
| if (isARM64()) |
| checkUsesInstruction(*code, "orn"); |
| return invoke<int32_t>(*code, n, m); |
| }; |
| |
| for (auto n : int32Operands()) { |
| for (auto m : int32Operands()) { |
| CHECK(test1(n.value, m.value) == (n.value | (-m.value - 1))); |
| CHECK(test2(n.value, m.value) == (n.value | (m.value ^ -1))); |
| } |
| } |
| } |
| |
| void testOrNot64() |
| { |
| if (JSC::Options::defaultB3OptLevel() < 2) |
| return; |
| |
| // Test Pattern: d = n | (-m - 1) |
| auto test1 = [&] (int64_t n, int64_t m) -> int64_t { |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| |
| Value* nValue = root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR0); |
| Value* mValue = root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR1); |
| Value* const1 = root->appendNew<Const64Value>(proc, Origin(), 1); |
| |
| Value* negValue = root->appendNew<Value>(proc, Neg, Origin(), mValue); |
| Value* subValue = root->appendNew<Value>(proc, Sub, Origin(), negValue, const1); |
| root->appendNewControlValue( |
| proc, Return, Origin(), |
| root->appendNew<Value>(proc, BitOr, Origin(), nValue, subValue)); |
| |
| auto code = compileProc(proc); |
| if (isARM64()) |
| checkUsesInstruction(*code, "orn"); |
| return invoke<int64_t>(*code, n, m); |
| }; |
| |
| // Test Pattern: d = n | (m ^ -1) |
| auto test2 = [&] (int64_t n, int64_t m) -> int64_t { |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| |
| Value* nValue = root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR0); |
| Value* mValue = root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR1); |
| Value* minusOneValue = root->appendNew<Const64Value>(proc, Origin(), -1); |
| |
| Value* xorValue = root->appendNew<Value>(proc, BitXor, Origin(), mValue, minusOneValue); |
| root->appendNewControlValue( |
| proc, Return, Origin(), |
| root->appendNew<Value>(proc, BitOr, Origin(), nValue, xorValue)); |
| |
| auto code = compileProc(proc); |
| if (isARM64()) |
| checkUsesInstruction(*code, "orn"); |
| return invoke<int64_t>(*code, n, m); |
| }; |
| |
| for (auto n : int64Operands()) { |
| for (auto m : int64Operands()) { |
| CHECK(test1(n.value, m.value) == (n.value | (-m.value - 1LL))); |
| CHECK(test2(n.value, m.value) == (n.value | (m.value ^ -1LL))); |
| } |
| } |
| } |
| |
| void testXorNot32() |
| { |
| if (JSC::Options::defaultB3OptLevel() < 2) |
| return; |
| |
| // Test Pattern: d = n ^ (m ^ -1) |
| auto test = [&] (int32_t n, int32_t m) -> int32_t { |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| |
| Value* nValue = root->appendNew<Value>( |
| proc, Trunc, Origin(), |
| root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR0)); |
| Value* mValue = root->appendNew<Value>( |
| proc, Trunc, Origin(), |
| root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR1)); |
| Value* minusOneValue = root->appendNew<Const32Value>(proc, Origin(), -1); |
| |
| Value* xorValue = root->appendNew<Value>(proc, BitXor, Origin(), mValue, minusOneValue); |
| root->appendNewControlValue( |
| proc, Return, Origin(), |
| root->appendNew<Value>(proc, BitXor, Origin(), nValue, xorValue)); |
| |
| auto code = compileProc(proc); |
| if (isARM64()) |
| checkUsesInstruction(*code, "eon"); |
| return invoke<int32_t>(*code, n, m); |
| }; |
| |
| for (auto n : int32Operands()) { |
| for (auto m : int32Operands()) |
| CHECK(test(n.value, m.value) == (n.value ^ (m.value ^ -1))); |
| } |
| } |
| |
| void testXorNot64() |
| { |
| if (JSC::Options::defaultB3OptLevel() < 2) |
| return; |
| |
| // Test Pattern: d = n ^ (m ^ -1) |
| auto test = [&] (int64_t n, int64_t m) -> int64_t { |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| |
| Value* nValue = root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR0); |
| Value* mValue = root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR1); |
| Value* minusOneValue = root->appendNew<Const64Value>(proc, Origin(), -1); |
| |
| Value* xorValue = root->appendNew<Value>(proc, BitXor, Origin(), mValue, minusOneValue); |
| root->appendNewControlValue( |
| proc, Return, Origin(), |
| root->appendNew<Value>(proc, BitXor, Origin(), nValue, xorValue)); |
| |
| auto code = compileProc(proc); |
| if (isARM64()) |
| checkUsesInstruction(*code, "eon"); |
| return invoke<int64_t>(*code, n, m); |
| }; |
| |
| for (auto n : int64Operands()) { |
| for (auto m : int64Operands()) |
| CHECK(test(n.value, m.value) == (n.value ^ (m.value ^ -1LL))); |
| } |
| } |
| |
| void testXorNotWithLeftShift32() |
| { |
| if (JSC::Options::defaultB3OptLevel() < 2) |
| return; |
| Vector<int32_t> amounts = { 1, 17, 31 }; |
| |
| // Test Pattern: d = n ^ ((m << amount) ^ -1) |
| auto test = [&] (int32_t n, int32_t m, int32_t amount) -> int32_t { |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| |
| Value* nValue = root->appendNew<Value>( |
| proc, Trunc, Origin(), |
| root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR0)); |
| Value* mValue = root->appendNew<Value>( |
| proc, Trunc, Origin(), |
| root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR1)); |
| Value* amountValue = root->appendNew<Const32Value>(proc, Origin(), amount); |
| Value* minusOneValue = root->appendNew<Const32Value>(proc, Origin(), -1); |
| |
| Value* shiftValue = root->appendNew<Value>(proc, Shl, Origin(), mValue, amountValue); |
| Value* xorValue = root->appendNew<Value>(proc, BitXor, Origin(), shiftValue, minusOneValue); |
| |
| root->appendNewControlValue( |
| proc, Return, Origin(), |
| root->appendNew<Value>(proc, BitXor, Origin(), nValue, xorValue)); |
| |
| auto code = compileProc(proc); |
| if (isARM64()) { |
| std::string regex(".*eon.*,.*,.*,.*lsl #"); |
| regex += std::to_string(amount) + ".*"; |
| checkUsesInstruction(*code, regex.c_str(), true); |
| } |
| return invoke<int32_t>(*code, n, m); |
| }; |
| |
| for (auto nOperand : int32Operands()) { |
| for (auto mOperand : int32Operands()) { |
| for (auto amount : amounts) { |
| int32_t n = nOperand.value; |
| int32_t m = mOperand.value; |
| CHECK_EQ(test(n, m, amount), n ^ ((m << amount) ^ -1)); |
| } |
| } |
| } |
| } |
| |
| void testXorNotWithRightShift32() |
| { |
| if (JSC::Options::defaultB3OptLevel() < 2) |
| return; |
| Vector<int32_t> amounts = { 1, 17, 31 }; |
| |
| // Test Pattern: d = n ^ ((m >> amount) ^ -1) |
| auto test = [&] (int32_t n, int32_t m, int32_t amount) -> int32_t { |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| |
| Value* nValue = root->appendNew<Value>( |
| proc, Trunc, Origin(), |
| root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR0)); |
| Value* mValue = root->appendNew<Value>( |
| proc, Trunc, Origin(), |
| root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR1)); |
| Value* amountValue = root->appendNew<Const32Value>(proc, Origin(), amount); |
| Value* minusOneValue = root->appendNew<Const32Value>(proc, Origin(), -1); |
| |
| Value* shiftValue = root->appendNew<Value>(proc, SShr, Origin(), mValue, amountValue); |
| Value* xorValue = root->appendNew<Value>(proc, BitXor, Origin(), shiftValue, minusOneValue); |
| |
| root->appendNewControlValue( |
| proc, Return, Origin(), |
| root->appendNew<Value>(proc, BitXor, Origin(), nValue, xorValue)); |
| |
| auto code = compileProc(proc); |
| if (isARM64()) { |
| std::string regex(".*eon.*,.*,.*,.*asr #"); |
| regex += std::to_string(amount) + ".*"; |
| checkUsesInstruction(*code, regex.c_str(), true); |
| } |
| return invoke<int32_t>(*code, n, m); |
| }; |
| |
| for (auto nOperand : int32Operands()) { |
| for (auto mOperand : int32Operands()) { |
| for (auto amount : amounts) { |
| int32_t n = nOperand.value; |
| int32_t m = mOperand.value; |
| CHECK_EQ(test(n, m, amount), n ^ ((m >> amount) ^ -1)); |
| } |
| } |
| } |
| } |
| |
| void testXorNotWithUnsignedRightShift32() |
| { |
| if (JSC::Options::defaultB3OptLevel() < 2) |
| return; |
| Vector<uint32_t> amounts = { 1, 17, 31 }; |
| |
| // Test Pattern: d = n ^ ((m >> amount) ^ -1) |
| auto test = [&] (int32_t n, int32_t m, int32_t amount) -> uint32_t { |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| |
| Value* nValue = root->appendNew<Value>( |
| proc, Trunc, Origin(), |
| root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR0)); |
| Value* mValue = root->appendNew<Value>( |
| proc, Trunc, Origin(), |
| root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR1)); |
| Value* amountValue = root->appendNew<Const32Value>(proc, Origin(), amount); |
| Value* minusOneValue = root->appendNew<Const32Value>(proc, Origin(), -1); |
| |
| Value* shiftValue = root->appendNew<Value>(proc, ZShr, Origin(), mValue, amountValue); |
| Value* xorValue = root->appendNew<Value>(proc, BitXor, Origin(), shiftValue, minusOneValue); |
| |
| root->appendNewControlValue( |
| proc, Return, Origin(), |
| root->appendNew<Value>(proc, BitXor, Origin(), nValue, xorValue)); |
| |
| auto code = compileProc(proc); |
| if (isARM64()) { |
| std::string regex(".*eon.*,.*,.*,.*lsr #"); |
| regex += std::to_string(amount) + ".*"; |
| checkUsesInstruction(*code, regex.c_str(), true); |
| } |
| return invoke<uint32_t>(*code, n, m); |
| }; |
| |
| for (auto nOperand : int32Operands()) { |
| for (auto mOperand : int32Operands()) { |
| for (auto amount : amounts) { |
| uint32_t n = nOperand.value; |
| uint32_t m = mOperand.value; |
| CHECK_EQ(test(n, m, amount), n ^ ((m >> amount) ^ -1)); |
| } |
| } |
| } |
| } |
| |
| void testXorNotWithLeftShift64() |
| { |
| if (JSC::Options::defaultB3OptLevel() < 2) |
| return; |
| Vector<int32_t> amounts = { 1, 34, 63 }; |
| |
| // Test Pattern: d = n ^ ((m << amount) ^ -1) |
| auto test = [&] (int64_t n, int64_t m, int32_t amount) -> int64_t { |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| |
| Value* nValue = root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR0); |
| Value* mValue = root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR1); |
| Value* amountValue = root->appendNew<Const32Value>(proc, Origin(), amount); |
| Value* minusOneValue = root->appendNew<Const64Value>(proc, Origin(), -1); |
| |
| Value* shiftValue = root->appendNew<Value>(proc, Shl, Origin(), mValue, amountValue); |
| Value* xorValue = root->appendNew<Value>(proc, BitXor, Origin(), shiftValue, minusOneValue); |
| |
| root->appendNewControlValue( |
| proc, Return, Origin(), |
| root->appendNew<Value>(proc, BitXor, Origin(), nValue, xorValue)); |
| |
| auto code = compileProc(proc); |
| if (isARM64()) { |
| std::string regex(".*eon.*,.*,.*,.*lsl #"); |
| regex += std::to_string(amount) + ".*"; |
| checkUsesInstruction(*code, regex.c_str(), true); |
| } |
| return invoke<int64_t>(*code, n, m); |
| }; |
| |
| for (auto nOperand : int64Operands()) { |
| for (auto mOperand : int64Operands()) { |
| for (auto amount : amounts) { |
| int64_t n = nOperand.value; |
| int64_t m = mOperand.value; |
| CHECK_EQ(test(n, m, amount), n ^ ((m << amount) ^ -1)); |
| } |
| } |
| } |
| } |
| |
| void testXorNotWithRightShift64() |
| { |
| if (JSC::Options::defaultB3OptLevel() < 2) |
| return; |
| Vector<int32_t> amounts = { 1, 34, 63 }; |
| |
| // Test Pattern: d = n ^ ((m >> amount) ^ -1) |
| auto test = [&] (int64_t n, int64_t m, int32_t amount) -> int64_t { |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| |
| Value* nValue = root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR0); |
| Value* mValue = root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR1); |
| Value* amountValue = root->appendNew<Const32Value>(proc, Origin(), amount); |
| Value* minusOneValue = root->appendNew<Const64Value>(proc, Origin(), -1); |
| |
| Value* shiftValue = root->appendNew<Value>(proc, SShr, Origin(), mValue, amountValue); |
| Value* xorValue = root->appendNew<Value>(proc, BitXor, Origin(), shiftValue, minusOneValue); |
| |
| root->appendNewControlValue( |
| proc, Return, Origin(), |
| root->appendNew<Value>(proc, BitXor, Origin(), nValue, xorValue)); |
| |
| auto code = compileProc(proc); |
| if (isARM64()) { |
| std::string regex(".*eon.*,.*,.*,.*asr #"); |
| regex += std::to_string(amount) + ".*"; |
| checkUsesInstruction(*code, regex.c_str(), true); |
| } |
| return invoke<int64_t>(*code, n, m); |
| }; |
| |
| for (auto nOperand : int64Operands()) { |
| for (auto mOperand : int64Operands()) { |
| for (auto amount : amounts) { |
| int64_t n = nOperand.value; |
| int64_t m = mOperand.value; |
| CHECK_EQ(test(n, m, amount), n ^ ((m >> amount) ^ -1)); |
| } |
| } |
| } |
| } |
| |
| void testXorNotWithUnsignedRightShift64() |
| { |
| if (JSC::Options::defaultB3OptLevel() < 2) |
| return; |
| Vector<uint32_t> amounts = { 1, 17, 31 }; |
| |
| // Test Pattern: d = n ^ ((m >> amount) ^ -1) |
| auto test = [&] (int64_t n, int64_t m, int32_t amount) -> uint64_t { |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| |
| Value* nValue = root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR0); |
| Value* mValue = root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR1); |
| Value* amountValue = root->appendNew<Const32Value>(proc, Origin(), amount); |
| Value* minusOneValue = root->appendNew<Const64Value>(proc, Origin(), -1); |
| |
| Value* shiftValue = root->appendNew<Value>(proc, ZShr, Origin(), mValue, amountValue); |
| Value* xorValue = root->appendNew<Value>(proc, BitXor, Origin(), shiftValue, minusOneValue); |
| |
| root->appendNewControlValue( |
| proc, Return, Origin(), |
| root->appendNew<Value>(proc, BitXor, Origin(), nValue, xorValue)); |
| |
| auto code = compileProc(proc); |
| if (isARM64()) { |
| std::string regex(".*eon.*,.*,.*,.*lsr #"); |
| regex += std::to_string(amount) + ".*"; |
| checkUsesInstruction(*code, regex.c_str(), true); |
| } |
| return invoke<uint64_t>(*code, n, m); |
| }; |
| |
| for (auto nOperand : int64Operands()) { |
| for (auto mOperand : int64Operands()) { |
| for (auto amount : amounts) { |
| uint64_t n = nOperand.value; |
| uint64_t m = mOperand.value; |
| CHECK_EQ(test(n, m, amount), n ^ ((m >> amount) ^ -1)); |
| } |
| } |
| } |
| } |
| |
| void testBitfieldZeroExtend32() |
| { |
| if (JSC::Options::defaultB3OptLevel() < 2) |
| return; |
| Vector<uint32_t> amounts = { 0, 14, 31 }; |
| |
| // Turn this: ZShr(Shl(n, amount)), amount) |
| // Into this: BitAnd(n, mask) |
| // Conditions: |
| // 1. 0 <= amount < datasize |
| // 2. width = datasize - amount |
| // 3. mask is !(mask & (mask + 1)) where bitCount(mask) == width |
| auto test = [&] (uint32_t n, uint32_t amount) -> uint32_t { |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| |
| Value* nValue = root->appendNew<Value>( |
| proc, Trunc, Origin(), |
| root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR0)); |
| Value* amountValue = root->appendNew<Const32Value>(proc, Origin(), amount); |
| Value* shlValue = root->appendNew<Value>(proc, Shl, Origin(), nValue, amountValue); |
| Value* zshrValue = root->appendNew<Value>(proc, ZShr, Origin(), shlValue, amountValue); |
| root->appendNewControlValue(proc, Return, Origin(), zshrValue); |
| |
| auto code = compileProc(proc); |
| if (isARM64() && amount > 0) |
| checkUsesInstruction(*code, "and"); |
| return invoke<uint32_t>(*code, n, amount); |
| }; |
| |
| uint32_t datasize = CHAR_BIT * sizeof(uint32_t); |
| for (auto nOperand : int32Operands()) { |
| for (auto amount : amounts) { |
| uint32_t n = nOperand.value; |
| uint32_t width = datasize - amount; |
| uint32_t mask = width == datasize ? std::numeric_limits<uint32_t>::max() : (1U << width) - 1U; |
| uint32_t lhs = test(n, amount); |
| uint32_t rhs = (n & mask); |
| CHECK(lhs == rhs); |
| } |
| } |
| } |
| |
| void testBitfieldZeroExtend64() |
| { |
| if (JSC::Options::defaultB3OptLevel() < 2) |
| return; |
| Vector<uint64_t> amounts = { 0, 34, 63 }; |
| |
| auto test = [&] (uint64_t n, uint64_t amount) -> uint64_t { |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| |
| Value* nValue = root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR0); |
| Value* amountValue = root->appendNew<Const32Value>(proc, Origin(), amount); |
| Value* shlValue = root->appendNew<Value>(proc, Shl, Origin(), nValue, amountValue); |
| Value* zshrValue = root->appendNew<Value>(proc, ZShr, Origin(), shlValue, amountValue); |
| root->appendNewControlValue(proc, Return, Origin(), zshrValue); |
| |
| auto code = compileProc(proc); |
| if (isARM64() && amount > 0) |
| checkUsesInstruction(*code, "and"); |
| return invoke<uint64_t>(*code, n, amount); |
| }; |
| |
| uint64_t datasize = CHAR_BIT * sizeof(uint64_t); |
| for (auto nOperand : int64Operands()) { |
| for (auto amount : amounts) { |
| uint64_t n = nOperand.value; |
| uint64_t width = datasize - amount; |
| uint64_t mask = width == datasize ? std::numeric_limits<uint64_t>::max() : (1ULL << width) - 1ULL; |
| uint64_t lhs = test(n, amount); |
| uint64_t rhs = (n & mask); |
| CHECK(lhs == rhs); |
| } |
| } |
| } |
| |
| void testExtractRegister32() |
| { |
| if (JSC::Options::defaultB3OptLevel() < 2) |
| return; |
| Vector<uint32_t> lowWidths = { 0, 17, 31 }; |
| |
| // Test Pattern: ((n & mask1) << highWidth) | ((m & mask2) >> lowWidth) |
| // Where: highWidth = datasize - lowWidth |
| // mask1 = (1 << lowWidth) - 1 |
| // mask2 = ~mask1 |
| auto test = [&] (uint32_t n, uint32_t m, uint32_t mask1, uint32_t mask2, uint32_t highWidth, uint32_t lowWidth) -> uint32_t { |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| |
| Value* nValue = root->appendNew<Value>( |
| proc, Trunc, Origin(), |
| root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR0)); |
| Value* mValue = root->appendNew<Value>( |
| proc, Trunc, Origin(), |
| root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR1)); |
| Value* mask1Value = root->appendNew<Const32Value>(proc, Origin(), mask1); |
| Value* mask2Value = root->appendNew<Const32Value>(proc, Origin(), mask2); |
| Value* highWidthValue = root->appendNew<Const32Value>(proc, Origin(), highWidth); |
| Value* lowWidthValue = root->appendNew<Const32Value>(proc, Origin(), lowWidth); |
| |
| Value* leftAndValue = root->appendNew<Value>(proc, BitAnd, Origin(), nValue, mask1Value); |
| Value* left = root->appendNew<Value>(proc, Shl, Origin(), leftAndValue, highWidthValue); |
| |
| Value* rightAndValue = root->appendNew<Value>(proc, BitAnd, Origin(), mValue, mask2Value); |
| Value* right = root->appendNew<Value>(proc, ZShr, Origin(), rightAndValue, lowWidthValue); |
| |
| root->appendNewControlValue( |
| proc, Return, Origin(), |
| root->appendNew<Value>(proc, BitOr, Origin(), left, right)); |
| |
| auto code = compileProc(proc); |
| if (isARM64() && lowWidth > 0) |
| checkUsesInstruction(*code, "extr"); |
| return invoke<uint32_t>(*code, n, m); |
| }; |
| |
| uint32_t datasize = CHAR_BIT * sizeof(uint32_t); |
| for (auto nOperand : int32Operands()) { |
| for (auto mOperand : int32Operands()) { |
| for (auto lowWidth : lowWidths) { |
| uint32_t n = nOperand.value; |
| uint32_t m = mOperand.value; |
| uint32_t highWidth = datasize - lowWidth; |
| uint32_t mask1 = (1U << lowWidth) - 1U; |
| uint32_t mask2 = ~mask1; |
| uint32_t left = highWidth == datasize ? 0U : ((n & mask1) << highWidth); |
| uint32_t right = ((m & mask2) >> lowWidth); |
| uint32_t rhs = left | right; |
| uint32_t lhs = test(n, m, mask1, mask2, highWidth, lowWidth); |
| CHECK(lhs == rhs); |
| } |
| } |
| } |
| } |
| |
| void testExtractRegister64() |
| { |
| if (JSC::Options::defaultB3OptLevel() < 2) |
| return; |
| Vector<uint64_t> lowWidths = { 0, 34, 63 }; |
| |
| // Test Pattern: ((n & mask1) << highWidth) | ((m & mask2) >> lowWidth) |
| // Where: highWidth = datasize - lowWidth |
| // mask1 = (1 << lowWidth) - 1 |
| // mask2 = ~mask1 |
| auto test = [&] (uint64_t n, uint64_t m, uint64_t mask1, uint64_t mask2, uint64_t highWidth, uint64_t lowWidth) -> uint64_t { |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| |
| Value* nValue = root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR0); |
| Value* mValue = root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR1); |
| Value* mask1Value = root->appendNew<Const64Value>(proc, Origin(), mask1); |
| Value* mask2Value = root->appendNew<Const64Value>(proc, Origin(), mask2); |
| Value* highWidthValue = root->appendNew<Const32Value>(proc, Origin(), highWidth); |
| Value* lowWidthValue = root->appendNew<Const32Value>(proc, Origin(), lowWidth); |
| |
| Value* leftAndValue = root->appendNew<Value>(proc, BitAnd, Origin(), nValue, mask1Value); |
| Value* left = root->appendNew<Value>(proc, Shl, Origin(), leftAndValue, highWidthValue); |
| |
| Value* rightAndValue = root->appendNew<Value>(proc, BitAnd, Origin(), mValue, mask2Value); |
| Value* right = root->appendNew<Value>(proc, ZShr, Origin(), rightAndValue, lowWidthValue); |
| |
| root->appendNewControlValue( |
| proc, Return, Origin(), |
| root->appendNew<Value>(proc, BitOr, Origin(), left, right)); |
| |
| auto code = compileProc(proc); |
| if (isARM64() && lowWidth > 0) |
| checkUsesInstruction(*code, "extr"); |
| return invoke<uint64_t>(*code, n, m); |
| }; |
| |
| uint64_t datasize = CHAR_BIT * sizeof(uint64_t); |
| for (auto nOperand : int64Operands()) { |
| for (auto mOperand : int64Operands()) { |
| for (auto lowWidth : lowWidths) { |
| uint64_t n = nOperand.value; |
| uint64_t m = mOperand.value; |
| uint64_t highWidth = datasize - lowWidth; |
| uint64_t mask1 = (1ULL << lowWidth) - 1ULL; |
| uint64_t mask2 = ~mask1; |
| uint64_t left = highWidth == datasize ? 0ULL : ((n & mask1) << highWidth); |
| uint64_t right = ((m & mask2) >> lowWidth); |
| uint64_t rhs = left | right; |
| uint64_t lhs = test(n, m, mask1, mask2, highWidth, lowWidth); |
| CHECK(lhs == rhs); |
| } |
| } |
| } |
| } |
| |
| void testAddWithLeftShift32() |
| { |
| if (JSC::Options::defaultB3OptLevel() < 2) |
| return; |
| Vector<int32_t> amounts = { 1, 17, 31 }; |
| |
| // Test Pattern: d = n + (m << amount) |
| auto test = [&] (int32_t n, int32_t m, int32_t amount) -> int32_t { |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| |
| Value* nValue = root->appendNew<Value>( |
| proc, Trunc, Origin(), |
| root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR0)); |
| Value* mValue = root->appendNew<Value>( |
| proc, Trunc, Origin(), |
| root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR1)); |
| Value* amountValue = root->appendNew<Const32Value>(proc, Origin(), amount); |
| |
| Value* shiftValue = root->appendNew<Value>(proc, Shl, Origin(), mValue, amountValue); |
| root->appendNewControlValue( |
| proc, Return, Origin(), |
| root->appendNew<Value>(proc, Add, Origin(), nValue, shiftValue)); |
| |
| auto code = compileProc(proc); |
| if (isARM64()) { |
| std::string regex(".*add.*,.*,.*,.*lsl #"); |
| regex += std::to_string(amount) + ".*"; |
| checkUsesInstruction(*code, regex.c_str(), true); |
| } |
| return invoke<int32_t>(*code, n, m); |
| }; |
| |
| for (auto nOperand : int32Operands()) { |
| for (auto mOperand : int32Operands()) { |
| for (auto amount : amounts) { |
| int32_t n = nOperand.value; |
| int32_t m = mOperand.value; |
| CHECK_EQ(test(n, m, amount), n + (m << amount)); |
| } |
| } |
| } |
| } |
| |
| void testAddWithRightShift32() |
| { |
| if (JSC::Options::defaultB3OptLevel() < 2) |
| return; |
| Vector<int32_t> amounts = { 1, 17, 31 }; |
| |
| // Test Pattern: d = n + (m >> amount) |
| auto test = [&] (int32_t n, int32_t m, int32_t amount) -> int32_t { |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| |
| Value* nValue = root->appendNew<Value>( |
| proc, Trunc, Origin(), |
| root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR0)); |
| Value* mValue = root->appendNew<Value>( |
| proc, Trunc, Origin(), |
| root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR1)); |
| Value* amountValue = root->appendNew<Const32Value>(proc, Origin(), amount); |
| |
| Value* shiftValue = root->appendNew<Value>(proc, SShr, Origin(), mValue, amountValue); |
| root->appendNewControlValue( |
| proc, Return, Origin(), |
| root->appendNew<Value>(proc, Add, Origin(), nValue, shiftValue)); |
| |
| auto code = compileProc(proc); |
| if (isARM64()) { |
| std::string regex(".*add.*,.*,.*,.*asr #"); |
| regex += std::to_string(amount) + ".*"; |
| checkUsesInstruction(*code, regex.c_str(), true); |
| } |
| return invoke<int32_t>(*code, n, m); |
| }; |
| |
| for (auto nOperand : int32Operands()) { |
| for (auto mOperand : int32Operands()) { |
| for (auto amount : amounts) { |
| int32_t n = nOperand.value; |
| int32_t m = mOperand.value; |
| CHECK_EQ(test(n, m, amount), n + (m >> amount)); |
| } |
| } |
| } |
| } |
| |
| void testAddWithUnsignedRightShift32() |
| { |
| if (JSC::Options::defaultB3OptLevel() < 2) |
| return; |
| Vector<uint32_t> amounts = { 1, 17, 31 }; |
| |
| // Test Pattern: d = n + (m >> amount) |
| auto test = [&] (uint32_t n, uint32_t m, uint32_t amount) -> uint32_t { |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| |
| Value* nValue = root->appendNew<Value>( |
| proc, Trunc, Origin(), |
| root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR0)); |
| Value* mValue = root->appendNew<Value>( |
| proc, Trunc, Origin(), |
| root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR1)); |
| Value* amountValue = root->appendNew<Const32Value>(proc, Origin(), amount); |
| |
| Value* shiftValue = root->appendNew<Value>(proc, ZShr, Origin(), mValue, amountValue); |
| root->appendNewControlValue( |
| proc, Return, Origin(), |
| root->appendNew<Value>(proc, Add, Origin(), nValue, shiftValue)); |
| |
| auto code = compileProc(proc); |
| if (isARM64()) { |
| std::string regex(".*add.*,.*,.*,.*lsr #"); |
| regex += std::to_string(amount) + ".*"; |
| checkUsesInstruction(*code, regex.c_str(), true); |
| } |
| return invoke<uint32_t>(*code, n, m); |
| }; |
| |
| for (auto nOperand : int32Operands()) { |
| for (auto mOperand : int32Operands()) { |
| for (auto amount : amounts) { |
| uint32_t n = nOperand.value; |
| uint32_t m = mOperand.value; |
| CHECK_EQ(test(n, m, amount), n + (m >> amount)); |
| } |
| } |
| } |
| } |
| |
| void testAddWithLeftShift64() |
| { |
| if (JSC::Options::defaultB3OptLevel() < 2) |
| return; |
| Vector<int32_t> amounts = { 1, 34, 63 }; |
| |
| // Test Pattern: d = n + (m << amount) |
| auto test = [&] (int64_t n, int64_t m, int32_t amount) -> int64_t { |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| |
| Value* nValue = root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR0); |
| Value* mValue = root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR1); |
| Value* amountValue = root->appendNew<Const32Value>(proc, Origin(), amount); |
| |
| Value* shiftValue = root->appendNew<Value>(proc, Shl, Origin(), mValue, amountValue); |
| root->appendNewControlValue( |
| proc, Return, Origin(), |
| root->appendNew<Value>(proc, Add, Origin(), nValue, shiftValue)); |
| |
| auto code = compileProc(proc); |
| if (isARM64()) { |
| std::string regex(".*add.*,.*,.*,.*lsl #"); |
| regex += std::to_string(amount) + ".*"; |
| checkUsesInstruction(*code, regex.c_str(), true); |
| } |
| return invoke<int64_t>(*code, n, m); |
| }; |
| |
| for (auto nOperand : int64Operands()) { |
| for (auto mOperand : int64Operands()) { |
| for (auto amount : amounts) { |
| int64_t n = nOperand.value; |
| int64_t m = mOperand.value; |
| CHECK_EQ(test(n, m, amount), n + (m << amount)); |
| } |
| } |
| } |
| } |
| |
| void testAddWithRightShift64() |
| { |
| if (JSC::Options::defaultB3OptLevel() < 2) |
| return; |
| Vector<int32_t> amounts = { 1, 34, 63 }; |
| |
| // Test Pattern: d = n + (m >> amount) |
| auto test = [&] (int64_t n, int64_t m, int32_t amount) -> int64_t { |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| |
| Value* nValue = root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR0); |
| Value* mValue = root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR1); |
| Value* amountValue = root->appendNew<Const32Value>(proc, Origin(), amount); |
| |
| Value* shiftValue = root->appendNew<Value>(proc, SShr, Origin(), mValue, amountValue); |
| root->appendNewControlValue( |
| proc, Return, Origin(), |
| root->appendNew<Value>(proc, Add, Origin(), nValue, shiftValue)); |
| |
| auto code = compileProc(proc); |
| if (isARM64()) { |
| std::string regex(".*add.*,.*,.*,.*asr #"); |
| regex += std::to_string(amount) + ".*"; |
| checkUsesInstruction(*code, regex.c_str(), true); |
| } |
| return invoke<int64_t>(*code, n, m); |
| }; |
| |
| for (auto nOperand : int64Operands()) { |
| for (auto mOperand : int64Operands()) { |
| for (auto amount : amounts) { |
| int64_t n = nOperand.value; |
| int64_t m = mOperand.value; |
| CHECK_EQ(test(n, m, amount), n + (m >> amount)); |
| } |
| } |
| } |
| } |
| |
| void testAddWithUnsignedRightShift64() |
| { |
| if (JSC::Options::defaultB3OptLevel() < 2) |
| return; |
| Vector<uint32_t> amounts = { 1, 17, 31 }; |
| |
| // Test Pattern: d = n + (m >> amount) |
| auto test = [&] (uint64_t n, uint64_t m, uint32_t amount) -> uint64_t { |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| |
| Value* nValue = root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR0); |
| Value* mValue = root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR1); |
| Value* amountValue = root->appendNew<Const32Value>(proc, Origin(), amount); |
| |
| Value* shiftValue = root->appendNew<Value>(proc, ZShr, Origin(), mValue, amountValue); |
| root->appendNewControlValue( |
| proc, Return, Origin(), |
| root->appendNew<Value>(proc, Add, Origin(), nValue, shiftValue)); |
| |
| auto code = compileProc(proc); |
| if (isARM64()) { |
| std::string regex(".*add.*,.*,.*,.*lsr #"); |
| regex += std::to_string(amount) + ".*"; |
| checkUsesInstruction(*code, regex.c_str(), true); |
| } |
| return invoke<uint64_t>(*code, n, m); |
| }; |
| |
| for (auto nOperand : int64Operands()) { |
| for (auto mOperand : int64Operands()) { |
| for (auto amount : amounts) { |
| uint64_t n = nOperand.value; |
| uint64_t m = mOperand.value; |
| CHECK_EQ(test(n, m, amount), n + (m >> amount)); |
| } |
| } |
| } |
| } |
| |
| void testSubWithLeftShift32() |
| { |
| if (JSC::Options::defaultB3OptLevel() < 2) |
| return; |
| Vector<int32_t> amounts = { 1, 17, 31 }; |
| |
| // Test Pattern: d = n - (m << amount) |
| auto test = [&] (int32_t n, int32_t m, int32_t amount) -> int32_t { |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| |
| Value* nValue = root->appendNew<Value>( |
| proc, Trunc, Origin(), |
| root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR0)); |
| Value* mValue = root->appendNew<Value>( |
| proc, Trunc, Origin(), |
| root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR1)); |
| Value* amountValue = root->appendNew<Const32Value>(proc, Origin(), amount); |
| |
| Value* shiftValue = root->appendNew<Value>(proc, Shl, Origin(), mValue, amountValue); |
| root->appendNewControlValue( |
| proc, Return, Origin(), |
| root->appendNew<Value>(proc, Sub, Origin(), nValue, shiftValue)); |
| |
| auto code = compileProc(proc); |
| if (isARM64()) { |
| std::string regex(".*sub.*,.*,.*,.*lsl #"); |
| regex += std::to_string(amount) + ".*"; |
| checkUsesInstruction(*code, regex.c_str(), true); |
| } |
| return invoke<int32_t>(*code, n, m); |
| }; |
| |
| for (auto nOperand : int32Operands()) { |
| for (auto mOperand : int32Operands()) { |
| for (auto amount : amounts) { |
| int32_t n = nOperand.value; |
| int32_t m = mOperand.value; |
| CHECK_EQ(test(n, m, amount), n - (m << amount)); |
| } |
| } |
| } |
| } |
| |
| void testSubWithRightShift32() |
| { |
| if (JSC::Options::defaultB3OptLevel() < 2) |
| return; |
| Vector<int32_t> amounts = { 1, 17, 31 }; |
| |
| // Test Pattern: d = n - (m >> amount) |
| auto test = [&] (int32_t n, int32_t m, int32_t amount) -> int32_t { |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| |
| Value* nValue = root->appendNew<Value>( |
| proc, Trunc, Origin(), |
| root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR0)); |
| Value* mValue = root->appendNew<Value>( |
| proc, Trunc, Origin(), |
| root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR1)); |
| Value* amountValue = root->appendNew<Const32Value>(proc, Origin(), amount); |
| |
| Value* shiftValue = root->appendNew<Value>(proc, SShr, Origin(), mValue, amountValue); |
| root->appendNewControlValue( |
| proc, Return, Origin(), |
| root->appendNew<Value>(proc, Sub, Origin(), nValue, shiftValue)); |
| |
| auto code = compileProc(proc); |
| if (isARM64()) { |
| std::string regex(".*sub.*,.*,.*,.*asr #"); |
| regex += std::to_string(amount) + ".*"; |
| checkUsesInstruction(*code, regex.c_str(), true); |
| } |
| return invoke<int32_t>(*code, n, m); |
| }; |
| |
| for (auto nOperand : int32Operands()) { |
| for (auto mOperand : int32Operands()) { |
| for (auto amount : amounts) { |
| int32_t n = nOperand.value; |
| int32_t m = mOperand.value; |
| CHECK_EQ(test(n, m, amount), n - (m >> amount)); |
| } |
| } |
| } |
| } |
| |
| void testSubWithUnsignedRightShift32() |
| { |
| if (JSC::Options::defaultB3OptLevel() < 2) |
| return; |
| Vector<uint32_t> amounts = { 1, 17, 31 }; |
| |
| // Test Pattern: d = n - (m >> amount) |
| auto test = [&] (uint32_t n, uint32_t m, uint32_t amount) -> uint32_t { |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| |
| Value* nValue = root->appendNew<Value>( |
| proc, Trunc, Origin(), |
| root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR0)); |
| Value* mValue = root->appendNew<Value>( |
| proc, Trunc, Origin(), |
| root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR1)); |
| Value* amountValue = root->appendNew<Const32Value>(proc, Origin(), amount); |
| |
| Value* shiftValue = root->appendNew<Value>(proc, ZShr, Origin(), mValue, amountValue); |
| root->appendNewControlValue( |
| proc, Return, Origin(), |
| root->appendNew<Value>(proc, Sub, Origin(), nValue, shiftValue)); |
| |
| auto code = compileProc(proc); |
| if (isARM64()) { |
| std::string regex(".*sub.*,.*,.*,.*lsr #"); |
| regex += std::to_string(amount) + ".*"; |
| checkUsesInstruction(*code, regex.c_str(), true); |
| } |
| return invoke<uint32_t>(*code, n, m); |
| }; |
| |
| for (auto nOperand : int32Operands()) { |
| for (auto mOperand : int32Operands()) { |
| for (auto amount : amounts) { |
| uint32_t n = nOperand.value; |
| uint32_t m = mOperand.value; |
| CHECK_EQ(test(n, m, amount), n - (m >> amount)); |
| } |
| } |
| } |
| } |
| |
| void testSubWithLeftShift64() |
| { |
| if (JSC::Options::defaultB3OptLevel() < 2) |
| return; |
| Vector<int32_t> amounts = { 1, 34, 63 }; |
| |
| // Test Pattern: d = n - (m << amount) |
| auto test = [&] (int64_t n, int64_t m, int32_t amount) -> int64_t { |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| |
| Value* nValue = root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR0); |
| Value* mValue = root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR1); |
| Value* amountValue = root->appendNew<Const32Value>(proc, Origin(), amount); |
| |
| Value* shiftValue = root->appendNew<Value>(proc, Shl, Origin(), mValue, amountValue); |
| root->appendNewControlValue( |
| proc, Return, Origin(), |
| root->appendNew<Value>(proc, Sub, Origin(), nValue, shiftValue)); |
| |
| auto code = compileProc(proc); |
| if (isARM64()) { |
| std::string regex(".*sub.*,.*,.*,.*lsl #"); |
| regex += std::to_string(amount) + ".*"; |
| checkUsesInstruction(*code, regex.c_str(), true); |
| } |
| return invoke<int64_t>(*code, n, m); |
| }; |
| |
| for (auto nOperand : int64Operands()) { |
| for (auto mOperand : int64Operands()) { |
| for (auto amount : amounts) { |
| int64_t n = nOperand.value; |
| int64_t m = mOperand.value; |
| CHECK_EQ(test(n, m, amount), n - (m << amount)); |
| } |
| } |
| } |
| } |
| |
| void testSubWithRightShift64() |
| { |
| if (JSC::Options::defaultB3OptLevel() < 2) |
| return; |
| Vector<int32_t> amounts = { 1, 34, 63 }; |
| |
| // Test Pattern: d = n - (m >> amount) |
| auto test = [&] (int64_t n, int64_t m, int32_t amount) -> int64_t { |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| |
| Value* nValue = root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR0); |
| Value* mValue = root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR1); |
| Value* amountValue = root->appendNew<Const32Value>(proc, Origin(), amount); |
| |
| Value* shiftValue = root->appendNew<Value>(proc, SShr, Origin(), mValue, amountValue); |
| root->appendNewControlValue( |
| proc, Return, Origin(), |
| root->appendNew<Value>(proc, Sub, Origin(), nValue, shiftValue)); |
| |
| auto code = compileProc(proc); |
| if (isARM64()) { |
| std::string regex(".*sub.*,.*,.*,.*asr #"); |
| regex += std::to_string(amount) + ".*"; |
| checkUsesInstruction(*code, regex.c_str(), true); |
| } |
| return invoke<int64_t>(*code, n, m); |
| }; |
| |
| for (auto nOperand : int64Operands()) { |
| for (auto mOperand : int64Operands()) { |
| for (auto amount : amounts) { |
| int64_t n = nOperand.value; |
| int64_t m = mOperand.value; |
| CHECK_EQ(test(n, m, amount), n - (m >> amount)); |
| } |
| } |
| } |
| } |
| |
| void testSubWithUnsignedRightShift64() |
| { |
| if (JSC::Options::defaultB3OptLevel() < 2) |
| return; |
| Vector<int32_t> amounts = { 1, 34, 63 }; |
| |
| // Test Pattern: d = n - (m >> amount) |
| auto test = [&] (uint64_t n, uint64_t m, uint32_t amount) -> uint64_t { |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| |
| Value* nValue = root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR0); |
| Value* mValue = root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR1); |
| Value* amountValue = root->appendNew<Const32Value>(proc, Origin(), amount); |
| |
| Value* shiftValue = root->appendNew<Value>(proc, ZShr, Origin(), mValue, amountValue); |
| root->appendNewControlValue( |
| proc, Return, Origin(), |
| root->appendNew<Value>(proc, Sub, Origin(), nValue, shiftValue)); |
| |
| auto code = compileProc(proc); |
| if (isARM64()) { |
| std::string regex(".*sub.*,.*,.*,.*lsr #"); |
| regex += std::to_string(amount) + ".*"; |
| checkUsesInstruction(*code, regex.c_str(), true); |
| } |
| return invoke<uint64_t>(*code, n, m); |
| }; |
| |
| for (auto nOperand : int64Operands()) { |
| for (auto mOperand : int64Operands()) { |
| for (auto amount : amounts) { |
| uint64_t n = nOperand.value; |
| uint64_t m = mOperand.value; |
| CHECK_EQ(test(n, m, amount), n - (m >> amount)); |
| } |
| } |
| } |
| } |
| |
| void testAndLeftShift32() |
| { |
| if (JSC::Options::defaultB3OptLevel() < 2) |
| return; |
| Vector<int32_t> amounts = { 1, 17, 31 }; |
| |
| // Test Pattern: d = n & (m << amount) |
| auto test = [&] (int32_t n, int32_t m, int32_t amount) -> int32_t { |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| |
| Value* nValue = root->appendNew<Value>( |
| proc, Trunc, Origin(), |
| root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR0)); |
| Value* mValue = root->appendNew<Value>( |
| proc, Trunc, Origin(), |
| root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR1)); |
| Value* amountValue = root->appendNew<Const32Value>(proc, Origin(), amount); |
| |
| Value* shiftValue = root->appendNew<Value>(proc, Shl, Origin(), mValue, amountValue); |
| root->appendNewControlValue( |
| proc, Return, Origin(), |
| root->appendNew<Value>(proc, BitAnd, Origin(), nValue, shiftValue)); |
| |
| auto code = compileProc(proc); |
| if (isARM64()) { |
| std::string regex(".*and.*,.*,.*,.*lsl #"); |
| regex += std::to_string(amount) + ".*"; |
| checkUsesInstruction(*code, regex.c_str(), true); |
| } |
| return invoke<int32_t>(*code, n, m); |
| }; |
| |
| for (auto nOperand : int32Operands()) { |
| for (auto mOperand : int32Operands()) { |
| for (auto amount : amounts) { |
| int32_t n = nOperand.value; |
| int32_t m = mOperand.value; |
| CHECK_EQ(test(n, m, amount), n & (m << amount)); |
| } |
| } |
| } |
| } |
| |
| void testAndRightShift32() |
| { |
| if (JSC::Options::defaultB3OptLevel() < 2) |
| return; |
| Vector<int32_t> amounts = { 1, 17, 31 }; |
| |
| // Test Pattern: d = n & (m >> amount) |
| auto test = [&] (int32_t n, int32_t m, int32_t amount) -> int32_t { |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| |
| Value* nValue = root->appendNew<Value>( |
| proc, Trunc, Origin(), |
| root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR0)); |
| Value* mValue = root->appendNew<Value>( |
| proc, Trunc, Origin(), |
| root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR1)); |
| Value* amountValue = root->appendNew<Const32Value>(proc, Origin(), amount); |
| |
| Value* shiftValue = root->appendNew<Value>(proc, SShr, Origin(), mValue, amountValue); |
| root->appendNewControlValue( |
| proc, Return, Origin(), |
| root->appendNew<Value>(proc, BitAnd, Origin(), nValue, shiftValue)); |
| |
| auto code = compileProc(proc); |
| if (isARM64()) { |
| std::string regex(".*and.*,.*,.*,.*asr #"); |
| regex += std::to_string(amount) + ".*"; |
| checkUsesInstruction(*code, regex.c_str(), true); |
| } |
| return invoke<int32_t>(*code, n, m); |
| }; |
| |
| for (auto nOperand : int32Operands()) { |
| for (auto mOperand : int32Operands()) { |
| for (auto amount : amounts) { |
| int32_t n = nOperand.value; |
| int32_t m = mOperand.value; |
| CHECK_EQ(test(n, m, amount), n & (m >> amount)); |
| } |
| } |
| } |
| } |
| |
| void testAndUnsignedRightShift32() |
| { |
| if (JSC::Options::defaultB3OptLevel() < 2) |
| return; |
| Vector<uint32_t> amounts = { 1, 17, 31 }; |
| |
| // Test Pattern: d = n & (m >> amount) |
| auto test = [&] (uint32_t n, uint32_t m, uint32_t amount) -> uint32_t { |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| |
| Value* nValue = root->appendNew<Value>( |
| proc, Trunc, Origin(), |
| root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR0)); |
| Value* mValue = root->appendNew<Value>( |
| proc, Trunc, Origin(), |
| root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR1)); |
| Value* amountValue = root->appendNew<Const32Value>(proc, Origin(), amount); |
| |
| Value* shiftValue = root->appendNew<Value>(proc, ZShr, Origin(), mValue, amountValue); |
| root->appendNewControlValue( |
| proc, Return, Origin(), |
| root->appendNew<Value>(proc, BitAnd, Origin(), nValue, shiftValue)); |
| |
| auto code = compileProc(proc); |
| if (isARM64()) { |
| std::string regex(".*and.*,.*,.*,.*lsr #"); |
| regex += std::to_string(amount) + ".*"; |
| checkUsesInstruction(*code, regex.c_str(), true); |
| } |
| return invoke<uint32_t>(*code, n, m); |
| }; |
| |
| for (auto nOperand : int32Operands()) { |
| for (auto mOperand : int32Operands()) { |
| for (auto amount : amounts) { |
| uint32_t n = nOperand.value; |
| uint32_t m = mOperand.value; |
| CHECK_EQ(test(n, m, amount), n & (m >> amount)); |
| } |
| } |
| } |
| } |
| |
| void testAndLeftShift64() |
| { |
| if (JSC::Options::defaultB3OptLevel() < 2) |
| return; |
| Vector<int32_t> amounts = { 1, 34, 63 }; |
| |
| // Test Pattern: d = n & (m << amount) |
| auto test = [&] (int64_t n, int64_t m, int32_t amount) -> int64_t { |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| |
| Value* nValue = root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR0); |
| Value* mValue = root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR1); |
| Value* amountValue = root->appendNew<Const32Value>(proc, Origin(), amount); |
| |
| Value* shiftValue = root->appendNew<Value>(proc, Shl, Origin(), mValue, amountValue); |
| root->appendNewControlValue( |
| proc, Return, Origin(), |
| root->appendNew<Value>(proc, BitAnd, Origin(), nValue, shiftValue)); |
| |
| auto code = compileProc(proc); |
| if (isARM64()) { |
| std::string regex(".*and.*,.*,.*,.*lsl #"); |
| regex += std::to_string(amount) + ".*"; |
| checkUsesInstruction(*code, regex.c_str(), true); |
| } |
| return invoke<int64_t>(*code, n, m); |
| }; |
| |
| for (auto nOperand : int64Operands()) { |
| for (auto mOperand : int64Operands()) { |
| for (auto amount : amounts) { |
| int64_t n = nOperand.value; |
| int64_t m = mOperand.value; |
| CHECK_EQ(test(n, m, amount), n & (m << amount)); |
| } |
| } |
| } |
| } |
| |
| void testAndRightShift64() |
| { |
| if (JSC::Options::defaultB3OptLevel() < 2) |
| return; |
| Vector<int32_t> amounts = { 1, 34, 63 }; |
| |
| // Test Pattern: d = n & (m >> amount) |
| auto test = [&] (int64_t n, int64_t m, int32_t amount) -> int64_t { |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| |
| Value* nValue = root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR0); |
| Value* mValue = root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR1); |
| Value* amountValue = root->appendNew<Const32Value>(proc, Origin(), amount); |
| |
| Value* shiftValue = root->appendNew<Value>(proc, SShr, Origin(), mValue, amountValue); |
| root->appendNewControlValue( |
| proc, Return, Origin(), |
| root->appendNew<Value>(proc, BitAnd, Origin(), nValue, shiftValue)); |
| |
| auto code = compileProc(proc); |
| if (isARM64()) { |
| std::string regex(".*and.*,.*,.*,.*asr #"); |
| regex += std::to_string(amount) + ".*"; |
| checkUsesInstruction(*code, regex.c_str(), true); |
| } |
| return invoke<int64_t>(*code, n, m); |
| }; |
| |
| for (auto nOperand : int64Operands()) { |
| for (auto mOperand : int64Operands()) { |
| for (auto amount : amounts) { |
| int64_t n = nOperand.value; |
| int64_t m = mOperand.value; |
| CHECK_EQ(test(n, m, amount), n & (m >> amount)); |
| } |
| } |
| } |
| } |
| |
| void testAndUnsignedRightShift64() |
| { |
| if (JSC::Options::defaultB3OptLevel() < 2) |
| return; |
| Vector<uint32_t> amounts = { 1, 17, 31 }; |
| |
| // Test Pattern: d = n & (m >> amount) |
| auto test = [&] (uint64_t n, uint64_t m, uint32_t amount) -> uint64_t { |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| |
| Value* nValue = root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR0); |
| Value* mValue = root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR1); |
| Value* amountValue = root->appendNew<Const32Value>(proc, Origin(), amount); |
| |
| Value* shiftValue = root->appendNew<Value>(proc, ZShr, Origin(), mValue, amountValue); |
| root->appendNewControlValue( |
| proc, Return, Origin(), |
| root->appendNew<Value>(proc, BitAnd, Origin(), nValue, shiftValue)); |
| |
| auto code = compileProc(proc); |
| if (isARM64()) { |
| std::string regex(".*and.*,.*,.*,.*lsr #"); |
| regex += std::to_string(amount) + ".*"; |
| checkUsesInstruction(*code, regex.c_str(), true); |
| } |
| return invoke<uint64_t>(*code, n, m); |
| }; |
| |
| for (auto nOperand : int64Operands()) { |
| for (auto mOperand : int64Operands()) { |
| for (auto amount : amounts) { |
| uint64_t n = nOperand.value; |
| uint64_t m = mOperand.value; |
| CHECK_EQ(test(n, m, amount), n & (m >> amount)); |
| } |
| } |
| } |
| } |
| |
| void testXorLeftShift32() |
| { |
| if (JSC::Options::defaultB3OptLevel() < 2) |
| return; |
| Vector<int32_t> amounts = { 1, 17, 31 }; |
| |
| // Test Pattern: d = n ^ (m << amount) |
| auto test = [&] (int32_t n, int32_t m, int32_t amount) -> int32_t { |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| |
| Value* nValue = root->appendNew<Value>( |
| proc, Trunc, Origin(), |
| root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR0)); |
| Value* mValue = root->appendNew<Value>( |
| proc, Trunc, Origin(), |
| root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR1)); |
| Value* amountValue = root->appendNew<Const32Value>(proc, Origin(), amount); |
| |
| Value* shiftValue = root->appendNew<Value>(proc, Shl, Origin(), mValue, amountValue); |
| root->appendNewControlValue( |
| proc, Return, Origin(), |
| root->appendNew<Value>(proc, BitXor, Origin(), nValue, shiftValue)); |
| |
| auto code = compileProc(proc); |
| if (isARM64()) { |
| std::string regex(".*eor.*,.*,.*,.*lsl #"); |
| regex += std::to_string(amount) + ".*"; |
| checkUsesInstruction(*code, regex.c_str(), true); |
| } |
| return invoke<int32_t>(*code, n, m); |
| }; |
| |
| for (auto nOperand : int32Operands()) { |
| for (auto mOperand : int32Operands()) { |
| for (auto amount : amounts) { |
| int32_t n = nOperand.value; |
| int32_t m = mOperand.value; |
| CHECK_EQ(test(n, m, amount), n ^ (m << amount)); |
| } |
| } |
| } |
| } |
| |
| void testXorRightShift32() |
| { |
| if (JSC::Options::defaultB3OptLevel() < 2) |
| return; |
| Vector<int32_t> amounts = { 1, 17, 31 }; |
| |
| // Test Pattern: d = n ^ (m >> amount) |
| auto test = [&] (int32_t n, int32_t m, int32_t amount) -> int32_t { |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| |
| Value* nValue = root->appendNew<Value>( |
| proc, Trunc, Origin(), |
| root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR0)); |
| Value* mValue = root->appendNew<Value>( |
| proc, Trunc, Origin(), |
| root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR1)); |
| Value* amountValue = root->appendNew<Const32Value>(proc, Origin(), amount); |
| |
| Value* shiftValue = root->appendNew<Value>(proc, SShr, Origin(), mValue, amountValue); |
| root->appendNewControlValue( |
| proc, Return, Origin(), |
| root->appendNew<Value>(proc, BitXor, Origin(), nValue, shiftValue)); |
| |
| auto code = compileProc(proc); |
| if (isARM64()) { |
| std::string regex(".*eor.*,.*,.*,.*asr #"); |
| regex += std::to_string(amount) + ".*"; |
| checkUsesInstruction(*code, regex.c_str(), true); |
| } |
| return invoke<int32_t>(*code, n, m); |
| }; |
| |
| for (auto nOperand : int32Operands()) { |
| for (auto mOperand : int32Operands()) { |
| for (auto amount : amounts) { |
| int32_t n = nOperand.value; |
| int32_t m = mOperand.value; |
| CHECK_EQ(test(n, m, amount), n ^ (m >> amount)); |
| } |
| } |
| } |
| } |
| |
| void testXorUnsignedRightShift32() |
| { |
| if (JSC::Options::defaultB3OptLevel() < 2) |
| return; |
| Vector<uint32_t> amounts = { 1, 17, 31 }; |
| |
| // Test Pattern: d = n ^ (m >> amount) |
| auto test = [&] (uint32_t n, uint32_t m, uint32_t amount) -> uint32_t { |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| |
| Value* nValue = root->appendNew<Value>( |
| proc, Trunc, Origin(), |
| root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR0)); |
| Value* mValue = root->appendNew<Value>( |
| proc, Trunc, Origin(), |
| root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR1)); |
| Value* amountValue = root->appendNew<Const32Value>(proc, Origin(), amount); |
| |
| Value* shiftValue = root->appendNew<Value>(proc, ZShr, Origin(), mValue, amountValue); |
| root->appendNewControlValue( |
| proc, Return, Origin(), |
| root->appendNew<Value>(proc, BitXor, Origin(), nValue, shiftValue)); |
| |
| auto code = compileProc(proc); |
| if (isARM64()) { |
| std::string regex(".*eor.*,.*,.*,.*lsr #"); |
| regex += std::to_string(amount) + ".*"; |
| checkUsesInstruction(*code, regex.c_str(), true); |
| } |
| return invoke<uint32_t>(*code, n, m); |
| }; |
| |
| for (auto nOperand : int32Operands()) { |
| for (auto mOperand : int32Operands()) { |
| for (auto amount : amounts) { |
| uint32_t n = nOperand.value; |
| uint32_t m = mOperand.value; |
| CHECK_EQ(test(n, m, amount), n ^ (m >> amount)); |
| } |
| } |
| } |
| } |
| |
| void testXorLeftShift64() |
| { |
| if (JSC::Options::defaultB3OptLevel() < 2) |
| return; |
| Vector<int32_t> amounts = { 1, 34, 63 }; |
| |
| // Test Pattern: d = n ^ (m << amount) |
| auto test = [&] (int64_t n, int64_t m, int32_t amount) -> int64_t { |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| |
| Value* nValue = root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR0); |
| Value* mValue = root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR1); |
| Value* amountValue = root->appendNew<Const32Value>(proc, Origin(), amount); |
| |
| Value* shiftValue = root->appendNew<Value>(proc, Shl, Origin(), mValue, amountValue); |
| root->appendNewControlValue( |
| proc, Return, Origin(), |
| root->appendNew<Value>(proc, BitXor, Origin(), nValue, shiftValue)); |
| |
| auto code = compileProc(proc); |
| if (isARM64()) { |
| std::string regex(".*eor.*,.*,.*,.*lsl #"); |
| regex += std::to_string(amount) + ".*"; |
| checkUsesInstruction(*code, regex.c_str(), true); |
| } |
| return invoke<int64_t>(*code, n, m); |
| }; |
| |
| for (auto nOperand : int64Operands()) { |
| for (auto mOperand : int64Operands()) { |
| for (auto amount : amounts) { |
| int64_t n = nOperand.value; |
| int64_t m = mOperand.value; |
| CHECK_EQ(test(n, m, amount), n ^ (m << amount)); |
| } |
| } |
| } |
| } |
| |
| void testXorRightShift64() |
| { |
| if (JSC::Options::defaultB3OptLevel() < 2) |
| return; |
| Vector<int32_t> amounts = { 1, 34, 63 }; |
| |
| // Test Pattern: d = n ^ (m >> amount) |
| auto test = [&] (int64_t n, int64_t m, int32_t amount) -> int64_t { |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| |
| Value* nValue = root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR0); |
| Value* mValue = root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR1); |
| Value* amountValue = root->appendNew<Const32Value>(proc, Origin(), amount); |
| |
| Value* shiftValue = root->appendNew<Value>(proc, SShr, Origin(), mValue, amountValue); |
| root->appendNewControlValue( |
| proc, Return, Origin(), |
| root->appendNew<Value>(proc, BitXor, Origin(), nValue, shiftValue)); |
| |
| auto code = compileProc(proc); |
| if (isARM64()) { |
| std::string regex(".*eor.*,.*,.*,.*asr #"); |
| regex += std::to_string(amount) + ".*"; |
| checkUsesInstruction(*code, regex.c_str(), true); |
| } |
| return invoke<int64_t>(*code, n, m); |
| }; |
| |
| for (auto nOperand : int64Operands()) { |
| for (auto mOperand : int64Operands()) { |
| for (auto amount : amounts) { |
| int64_t n = nOperand.value; |
| int64_t m = mOperand.value; |
| CHECK_EQ(test(n, m, amount), n ^ (m >> amount)); |
| } |
| } |
| } |
| } |
| |
| void testXorUnsignedRightShift64() |
| { |
| if (JSC::Options::defaultB3OptLevel() < 2) |
| return; |
| Vector<uint32_t> amounts = { 1, 17, 31 }; |
| |
| // Test Pattern: d = n ^ (m >> amount) |
| auto test = [&] (uint64_t n, uint64_t m, uint32_t amount) -> uint64_t { |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| |
| Value* nValue = root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR0); |
| Value* mValue = root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR1); |
| Value* amountValue = root->appendNew<Const32Value>(proc, Origin(), amount); |
| |
| Value* shiftValue = root->appendNew<Value>(proc, ZShr, Origin(), mValue, amountValue); |
| root->appendNewControlValue( |
| proc, Return, Origin(), |
| root->appendNew<Value>(proc, BitXor, Origin(), nValue, shiftValue)); |
| |
| auto code = compileProc(proc); |
| if (isARM64()) { |
| std::string regex(".*eor.*,.*,.*,.*lsr #"); |
| regex += std::to_string(amount) + ".*"; |
| checkUsesInstruction(*code, regex.c_str(), true); |
| } |
| return invoke<uint64_t>(*code, n, m); |
| }; |
| |
| for (auto nOperand : int64Operands()) { |
| for (auto mOperand : int64Operands()) { |
| for (auto amount : amounts) { |
| uint64_t n = nOperand.value; |
| uint64_t m = mOperand.value; |
| CHECK_EQ(test(n, m, amount), n ^ (m >> amount)); |
| } |
| } |
| } |
| } |
| |
| void testOrLeftShift32() |
| { |
| if (JSC::Options::defaultB3OptLevel() < 2) |
| return; |
| Vector<int32_t> amounts = { 1, 17, 31 }; |
| |
| // Test Pattern: d = n | (m << amount) |
| auto test = [&] (int32_t n, int32_t m, int32_t amount) -> int32_t { |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| |
| Value* nValue = root->appendNew<Value>( |
| proc, Trunc, Origin(), |
| root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR0)); |
| Value* mValue = root->appendNew<Value>( |
| proc, Trunc, Origin(), |
| root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR1)); |
| Value* amountValue = root->appendNew<Const32Value>(proc, Origin(), amount); |
| |
| Value* shiftValue = root->appendNew<Value>(proc, Shl, Origin(), mValue, amountValue); |
| root->appendNewControlValue( |
| proc, Return, Origin(), |
| root->appendNew<Value>(proc, BitOr, Origin(), nValue, shiftValue)); |
| |
| auto code = compileProc(proc); |
| if (isARM64()) { |
| std::string regex(".*orr.*,.*,.*,.*lsl #"); |
| regex += std::to_string(amount) + ".*"; |
| checkUsesInstruction(*code, regex.c_str(), true); |
| } |
| return invoke<int32_t>(*code, n, m); |
| }; |
| |
| for (auto nOperand : int32Operands()) { |
| for (auto mOperand : int32Operands()) { |
| for (auto amount : amounts) { |
| int32_t n = nOperand.value; |
| int32_t m = mOperand.value; |
| CHECK_EQ(test(n, m, amount), n | (m << amount)); |
| } |
| } |
| } |
| } |
| |
| void testOrRightShift32() |
| { |
| if (JSC::Options::defaultB3OptLevel() < 2) |
| return; |
| Vector<int32_t> amounts = { 1, 17, 31 }; |
| |
| // Test Pattern: d = n | (m >> amount) |
| auto test = [&] (int32_t n, int32_t m, int32_t amount) -> int32_t { |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| |
| Value* nValue = root->appendNew<Value>( |
| proc, Trunc, Origin(), |
| root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR0)); |
| Value* mValue = root->appendNew<Value>( |
| proc, Trunc, Origin(), |
| root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR1)); |
| Value* amountValue = root->appendNew<Const32Value>(proc, Origin(), amount); |
| |
| Value* shiftValue = root->appendNew<Value>(proc, SShr, Origin(), mValue, amountValue); |
| root->appendNewControlValue( |
| proc, Return, Origin(), |
| root->appendNew<Value>(proc, BitOr, Origin(), nValue, shiftValue)); |
| |
| auto code = compileProc(proc); |
| if (isARM64()) { |
| std::string regex(".*orr.*,.*,.*,.*asr #"); |
| regex += std::to_string(amount) + ".*"; |
| checkUsesInstruction(*code, regex.c_str(), true); |
| } |
| return invoke<int32_t>(*code, n, m); |
| }; |
| |
| for (auto nOperand : int32Operands()) { |
| for (auto mOperand : int32Operands()) { |
| for (auto amount : amounts) { |
| int32_t n = nOperand.value; |
| int32_t m = mOperand.value; |
| CHECK_EQ(test(n, m, amount), n | (m >> amount)); |
| } |
| } |
| } |
| } |
| |
| void testOrUnsignedRightShift32() |
| { |
| if (JSC::Options::defaultB3OptLevel() < 2) |
| return; |
| Vector<uint32_t> amounts = { 1, 17, 31 }; |
| |
| // Test Pattern: d = n | (m >> amount) |
| auto test = [&] (uint32_t n, uint32_t m, uint32_t amount) -> uint32_t { |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| |
| Value* nValue = root->appendNew<Value>( |
| proc, Trunc, Origin(), |
| root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR0)); |
| Value* mValue = root->appendNew<Value>( |
| proc, Trunc, Origin(), |
| root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR1)); |
| Value* amountValue = root->appendNew<Const32Value>(proc, Origin(), amount); |
| |
| Value* shiftValue = root->appendNew<Value>(proc, ZShr, Origin(), mValue, amountValue); |
| root->appendNewControlValue( |
| proc, Return, Origin(), |
| root->appendNew<Value>(proc, BitOr, Origin(), nValue, shiftValue)); |
| |
| auto code = compileProc(proc); |
| if (isARM64()) { |
| std::string regex(".*orr.*,.*,.*,.*lsr #"); |
| regex += std::to_string(amount) + ".*"; |
| checkUsesInstruction(*code, regex.c_str(), true); |
| } |
| return invoke<uint32_t>(*code, n, m); |
| }; |
| |
| for (auto nOperand : int32Operands()) { |
| for (auto mOperand : int32Operands()) { |
| for (auto amount : amounts) { |
| uint32_t n = nOperand.value; |
| uint32_t m = mOperand.value; |
| CHECK_EQ(test(n, m, amount), n | (m >> amount)); |
| } |
| } |
| } |
| } |
| |
| void testOrLeftShift64() |
| { |
| if (JSC::Options::defaultB3OptLevel() < 2) |
| return; |
| Vector<int32_t> amounts = { 1, 34, 63 }; |
| |
| // Test Pattern: d = n | (m << amount) |
| auto test = [&] (int64_t n, int64_t m, int32_t amount) -> int64_t { |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| |
| Value* nValue = root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR0); |
| Value* mValue = root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR1); |
| Value* amountValue = root->appendNew<Const32Value>(proc, Origin(), amount); |
| |
| Value* shiftValue = root->appendNew<Value>(proc, Shl, Origin(), mValue, amountValue); |
| root->appendNewControlValue( |
| proc, Return, Origin(), |
| root->appendNew<Value>(proc, BitOr, Origin(), nValue, shiftValue)); |
| |
| auto code = compileProc(proc); |
| if (isARM64()) { |
| std::string regex(".*orr.*,.*,.*,.*lsl #"); |
| regex += std::to_string(amount) + ".*"; |
| checkUsesInstruction(*code, regex.c_str(), true); |
| } |
| return invoke<int64_t>(*code, n, m); |
| }; |
| |
| for (auto nOperand : int64Operands()) { |
| for (auto mOperand : int64Operands()) { |
| for (auto amount : amounts) { |
| int64_t n = nOperand.value; |
| int64_t m = mOperand.value; |
| CHECK_EQ(test(n, m, amount), n | (m << amount)); |
| } |
| } |
| } |
| } |
| |
| void testOrRightShift64() |
| { |
| if (JSC::Options::defaultB3OptLevel() < 2) |
| return; |
| Vector<int32_t> amounts = { 1, 34, 63 }; |
| |
| // Test Pattern: d = n | (m >> amount) |
| auto test = [&] (int64_t n, int64_t m, int32_t amount) -> int64_t { |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| |
| Value* nValue = root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR0); |
| Value* mValue = root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR1); |
| Value* amountValue = root->appendNew<Const32Value>(proc, Origin(), amount); |
| |
| Value* shiftValue = root->appendNew<Value>(proc, SShr, Origin(), mValue, amountValue); |
| root->appendNewControlValue( |
| proc, Return, Origin(), |
| root->appendNew<Value>(proc, BitOr, Origin(), nValue, shiftValue)); |
| |
| auto code = compileProc(proc); |
| if (isARM64()) { |
| std::string regex(".*orr.*,.*,.*,.*asr #"); |
| regex += std::to_string(amount) + ".*"; |
| checkUsesInstruction(*code, regex.c_str(), true); |
| } |
| return invoke<int64_t>(*code, n, m); |
| }; |
| |
| for (auto nOperand : int64Operands()) { |
| for (auto mOperand : int64Operands()) { |
| for (auto amount : amounts) { |
| int64_t n = nOperand.value; |
| int64_t m = mOperand.value; |
| CHECK_EQ(test(n, m, amount), n | (m >> amount)); |
| } |
| } |
| } |
| } |
| |
| void testOrUnsignedRightShift64() |
| { |
| if (JSC::Options::defaultB3OptLevel() < 2) |
| return; |
| Vector<uint32_t> amounts = { 1, 17, 31 }; |
| |
| // Test Pattern: d = n | (m >> amount) |
| auto test = [&] (uint64_t n, uint64_t m, uint32_t amount) -> uint64_t { |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| |
| Value* nValue = root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR0); |
| Value* mValue = root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR1); |
| Value* amountValue = root->appendNew<Const32Value>(proc, Origin(), amount); |
| |
| Value* shiftValue = root->appendNew<Value>(proc, ZShr, Origin(), mValue, amountValue); |
| root->appendNewControlValue( |
| proc, Return, Origin(), |
| root->appendNew<Value>(proc, BitOr, Origin(), nValue, shiftValue)); |
| |
| auto code = compileProc(proc); |
| if (isARM64()) { |
| std::string regex(".*orr.*,.*,.*,.*lsr #"); |
| regex += std::to_string(amount) + ".*"; |
| checkUsesInstruction(*code, regex.c_str(), true); |
| } |
| return invoke<uint64_t>(*code, n, m); |
| }; |
| |
| for (auto nOperand : int64Operands()) { |
| for (auto mOperand : int64Operands()) { |
| for (auto amount : amounts) { |
| uint64_t n = nOperand.value; |
| uint64_t m = mOperand.value; |
| CHECK_EQ(test(n, m, amount), n | (m >> amount)); |
| } |
| } |
| } |
| } |
| |
| void testBitAndZeroShiftRightArgImmMask32() |
| { |
| // Turn this: (tmp >> imm) & mask |
| // Into this: tmp >> imm |
| uint32_t tmp = 0xffffffff; |
| Vector<uint32_t> imms = { 4, 28, 31 }; |
| Vector<uint32_t> masks = { 0x0fffffff, 0xf, 0xffff }; |
| |
| auto test = [&] (uint32_t imm, uint32_t mask) { |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| |
| Value* tmpValue = root->appendNew<Value>( |
| proc, Trunc, Origin(), |
| root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR0)); |
| Value* immValue = root->appendNew<Const32Value>(proc, Origin(), imm); |
| Value* leftValue = root->appendNew<Value>(proc, ZShr, Origin(), tmpValue, immValue); |
| Value* rightValue = root->appendNew<Const32Value>(proc, Origin(), mask); |
| root->appendNewControlValue( |
| proc, Return, Origin(), |
| root->appendNew<Value>(proc, BitAnd, Origin(), leftValue, rightValue)); |
| |
| auto code = compileProc(proc); |
| if (isARM64()) |
| checkUsesInstruction(*code, "lsr"); |
| uint32_t lhs = invoke<uint32_t>(*code, tmp); |
| uint32_t rhs = tmp >> imm; |
| CHECK(lhs == rhs); |
| }; |
| |
| for (size_t i = 0; i < imms.size(); ++i) |
| test(imms.at(i), masks.at(i)); |
| } |
| |
| void testBitAndZeroShiftRightArgImmMask64() |
| { |
| // Turn this: (tmp >> imm) & mask |
| // Into this: tmp >> imm |
| uint64_t tmp = 0xffffffffffffffff; |
| Vector<uint64_t> imms = { 4, 60, 63 }; |
| Vector<uint64_t> masks = { 0x0fffffffffffffff, 0xf, 0xffff }; |
| |
| auto test = [&] (uint64_t imm, uint64_t mask) { |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| |
| Value* tmpValue = root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR0); |
| Value* immValue = root->appendNew<Const32Value>(proc, Origin(), imm); |
| Value* leftValue = root->appendNew<Value>(proc, ZShr, Origin(), tmpValue, immValue); |
| Value* rightValue = root->appendNew<Const64Value>(proc, Origin(), mask); |
| root->appendNewControlValue( |
| proc, Return, Origin(), |
| root->appendNew<Value>(proc, BitAnd, Origin(), leftValue, rightValue)); |
| |
| auto code = compileProc(proc); |
| if (isARM64()) |
| checkUsesInstruction(*code, "lsr"); |
| uint64_t lhs = invoke<uint64_t>(*code, tmp); |
| uint64_t rhs = tmp >> imm; |
| CHECK(lhs == rhs); |
| }; |
| |
| for (size_t i = 0; i < imms.size(); ++i) |
| test(imms.at(i), masks.at(i)); |
| } |
| |
| static void testBitAndArgs(int64_t a, int64_t b) |
| { |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| root->appendNewControlValue( |
| proc, Return, Origin(), |
| root->appendNew<Value>( |
| proc, BitAnd, Origin(), |
| root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR0), |
| root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR1))); |
| |
| CHECK(compileAndRun<int64_t>(proc, a, b) == (a & b)); |
| } |
| |
| static void testBitAndSameArg(int64_t a) |
| { |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| Value* argument = root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR0); |
| root->appendNewControlValue( |
| proc, Return, Origin(), |
| root->appendNew<Value>( |
| proc, BitAnd, Origin(), |
| argument, |
| argument)); |
| |
| CHECK(compileAndRun<int64_t>(proc, a) == a); |
| } |
| |
| static void testBitAndNotNot(int64_t a, int64_t b) |
| { |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| Value* argA = root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR0); |
| Value* argB = root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR1); |
| Value* notA = root->appendNew<Value>(proc, BitXor, Origin(), argA, root->appendNew<Const64Value>(proc, Origin(), -1)); |
| Value* notB = root->appendNew<Value>(proc, BitXor, Origin(), argB, root->appendNew<Const64Value>(proc, Origin(), -1)); |
| root->appendNewControlValue( |
| proc, Return, Origin(), |
| root->appendNew<Value>( |
| proc, BitAnd, Origin(), |
| notA, |
| notB)); |
| |
| CHECK_EQ(compileAndRun<int64_t>(proc, a, b), (~a & ~b)); |
| } |
| |
| static void testBitAndNotNot32(int32_t a, int32_t b) |
| { |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| Value* argA = root->appendNew<Value>(proc, Trunc, Origin(), root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR0)); |
| Value* argB = root->appendNew<Value>(proc, Trunc, Origin(), root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR1)); |
| Value* notA = root->appendNew<Value>(proc, BitXor, Origin(), argA, root->appendNew<Const32Value>(proc, Origin(), -1)); |
| Value* notB = root->appendNew<Value>(proc, BitXor, Origin(), argB, root->appendNew<Const32Value>(proc, Origin(), -1)); |
| root->appendNewControlValue( |
| proc, Return, Origin(), |
| root->appendNew<Value>( |
| proc, BitAnd, Origin(), |
| notA, |
| notB)); |
| |
| CHECK_EQ(compileAndRun<int32_t>(proc, a, b), (~a & ~b)); |
| } |
| |
| static void testBitAndNotImm(int64_t a, int64_t b) |
| { |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| Value* argA = root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR0); |
| Value* notA = root->appendNew<Value>(proc, BitXor, Origin(), argA, root->appendNew<Const64Value>(proc, Origin(), -1)); |
| Value* cstB = root->appendNew<Const64Value>(proc, Origin(), b); |
| root->appendNewControlValue( |
| proc, Return, Origin(), |
| root->appendNew<Value>( |
| proc, BitAnd, Origin(), |
| notA, |
| cstB)); |
| |
| CHECK_EQ(compileAndRun<int64_t>(proc, a), (~a & b)); |
| } |
| |
| static void testBitAndNotImm32(int32_t a, int32_t b) |
| { |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| Value* argA = root->appendNew<Value>(proc, Trunc, Origin(), root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR0)); |
| Value* notA = root->appendNew<Value>(proc, BitXor, Origin(), argA, root->appendNew<Const32Value>(proc, Origin(), -1)); |
| Value* cstB = root->appendNew<Const32Value>(proc, Origin(), b); |
| root->appendNewControlValue( |
| proc, Return, Origin(), |
| root->appendNew<Value>( |
| proc, BitAnd, Origin(), |
| notA, |
| cstB)); |
| |
| CHECK_EQ(compileAndRun<int32_t>(proc, a), (~a & b)); |
| } |
| |
| static void testBitAndImms(int64_t a, int64_t b) |
| { |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| root->appendNewControlValue( |
| proc, Return, Origin(), |
| root->appendNew<Value>( |
| proc, BitAnd, Origin(), |
| root->appendNew<Const64Value>(proc, Origin(), a), |
| root->appendNew<Const64Value>(proc, Origin(), b))); |
| |
| CHECK(compileAndRun<int64_t>(proc) == (a & b)); |
| } |
| |
| static void testBitAndArgImm(int64_t a, int64_t b) |
| { |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| root->appendNewControlValue( |
| proc, Return, Origin(), |
| root->appendNew<Value>( |
| proc, BitAnd, Origin(), |
| root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR0), |
| root->appendNew<Const64Value>(proc, Origin(), b))); |
| |
| CHECK(compileAndRun<int64_t>(proc, a) == (a & b)); |
| } |
| |
| static void testBitAndImmArg(int64_t a, int64_t b) |
| { |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| root->appendNewControlValue( |
| proc, Return, Origin(), |
| root->appendNew<Value>( |
| proc, BitAnd, Origin(), |
| root->appendNew<Const64Value>(proc, Origin(), a), |
| root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR0))); |
| |
| CHECK(compileAndRun<int64_t>(proc, b) == (a & b)); |
| } |
| |
| static void testBitAndBitAndArgImmImm(int64_t a, int64_t b, int64_t c) |
| { |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| Value* innerBitAnd = root->appendNew<Value>( |
| proc, BitAnd, Origin(), |
| root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR0), |
| root->appendNew<Const64Value>(proc, Origin(), b)); |
| root->appendNewControlValue( |
| proc, Return, Origin(), |
| root->appendNew<Value>( |
| proc, BitAnd, Origin(), |
| innerBitAnd, |
| root->appendNew<Const64Value>(proc, Origin(), c))); |
| |
| CHECK(compileAndRun<int64_t>(proc, a) == ((a & b) & c)); |
| } |
| |
| static void testBitAndImmBitAndArgImm(int64_t a, int64_t b, int64_t c) |
| { |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| Value* innerBitAnd = root->appendNew<Value>( |
| proc, BitAnd, Origin(), |
| root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR0), |
| root->appendNew<Const64Value>(proc, Origin(), c)); |
| root->appendNewControlValue( |
| proc, Return, Origin(), |
| root->appendNew<Value>( |
| proc, BitAnd, Origin(), |
| root->appendNew<Const64Value>(proc, Origin(), a), |
| innerBitAnd)); |
| |
| CHECK(compileAndRun<int64_t>(proc, b) == (a & (b & c))); |
| } |
| |
| static void testBitAndArgs32(int a, int b) |
| { |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| root->appendNewControlValue( |
| proc, Return, Origin(), |
| root->appendNew<Value>( |
| proc, BitAnd, Origin(), |
| root->appendNew<Value>( |
| proc, Trunc, Origin(), |
| root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR0)), |
| root->appendNew<Value>( |
| proc, Trunc, Origin(), |
| root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR1)))); |
| |
| CHECK(compileAndRun<int>(proc, a, b) == (a & b)); |
| } |
| |
| static void testBitAndSameArg32(int a) |
| { |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| Value* argument = root->appendNew<Value>(proc, Trunc, Origin(), |
| root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR0)); |
| root->appendNewControlValue( |
| proc, Return, Origin(), |
| root->appendNew<Value>( |
| proc, BitAnd, Origin(), |
| argument, |
| argument)); |
| |
| CHECK(compileAndRun<int>(proc, a) == a); |
| } |
| |
| static void testBitAndImms32(int a, int b) |
| { |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| root->appendNewControlValue( |
| proc, Return, Origin(), |
| root->appendNew<Value>( |
| proc, BitAnd, Origin(), |
| root->appendNew<Const32Value>(proc, Origin(), a), |
| root->appendNew<Const32Value>(proc, Origin(), b))); |
| |
| CHECK(compileAndRun<int>(proc) == (a & b)); |
| } |
| |
| static void testBitAndArgImm32(int a, int b) |
| { |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| root->appendNewControlValue( |
| proc, Return, Origin(), |
| root->appendNew<Value>( |
| proc, BitAnd, Origin(), |
| root->appendNew<Value>( |
| proc, Trunc, Origin(), |
| root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR0)), |
| root->appendNew<Const32Value>(proc, Origin(), b))); |
| |
| CHECK(compileAndRun<int>(proc, a) == (a & b)); |
| } |
| |
| static void testBitAndImmArg32(int a, int b) |
| { |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| root->appendNewControlValue( |
| proc, Return, Origin(), |
| root->appendNew<Value>( |
| proc, BitAnd, Origin(), |
| root->appendNew<Const32Value>(proc, Origin(), a), |
| root->appendNew<Value>( |
| proc, Trunc, Origin(), |
| root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR0)))); |
| |
| CHECK(compileAndRun<int>(proc, b) == (a & b)); |
| } |
| |
| static void testBitAndBitAndArgImmImm32(int a, int b, int c) |
| { |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| Value* innerBitAnd = root->appendNew<Value>( |
| proc, BitAnd, Origin(), |
| root->appendNew<Value>( |
| proc, Trunc, Origin(), |
| root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR0)), |
| root->appendNew<Const32Value>(proc, Origin(), b)); |
| root->appendNewControlValue( |
| proc, Return, Origin(), |
| root->appendNew<Value>( |
| proc, BitAnd, Origin(), |
| innerBitAnd, |
| root->appendNew<Const32Value>(proc, Origin(), c))); |
| |
| CHECK(compileAndRun<int>(proc, a) == ((a & b) & c)); |
| } |
| |
| static void testBitAndImmBitAndArgImm32(int a, int b, int c) |
| { |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| Value* innerBitAnd = root->appendNew<Value>( |
| proc, BitAnd, Origin(), |
| root->appendNew<Value>( |
| proc, Trunc, Origin(), |
| root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR0)), |
| root->appendNew<Const32Value>(proc, Origin(), c)); |
| root->appendNewControlValue( |
| proc, Return, Origin(), |
| root->appendNew<Value>( |
| proc, BitAnd, Origin(), |
| root->appendNew<Const32Value>(proc, Origin(), a), |
| innerBitAnd)); |
| |
| CHECK(compileAndRun<int>(proc, b) == (a & (b & c))); |
| } |
| |
| static void testBitAndWithMaskReturnsBooleans(int64_t a, int64_t b) |
| { |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| Value* arg0 = root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR0); |
| Value* arg1 = root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR1); |
| Value* equal = root->appendNew<Value>(proc, Equal, Origin(), arg0, arg1); |
| Value* maskedEqual = root->appendNew<Value>(proc, BitAnd, Origin(), |
| root->appendNew<Const32Value>(proc, Origin(), 0x5), |
| equal); |
| Value* inverted = root->appendNew<Value>(proc, BitXor, Origin(), |
| root->appendNew<Const32Value>(proc, Origin(), 0x1), |
| maskedEqual); |
| Value* select = root->appendNew<Value>(proc, Select, Origin(), inverted, |
| root->appendNew<Const64Value>(proc, Origin(), 42), |
| root->appendNew<Const64Value>(proc, Origin(), -5)); |
| |
| root->appendNewControlValue(proc, Return, Origin(), select); |
| |
| int64_t expected = (a == b) ? -5 : 42; |
| CHECK(compileAndRun<int64_t>(proc, a, b) == expected); |
| } |
| |
| static double bitAndDouble(double a, double b) |
| { |
| return bitwise_cast<double>(bitwise_cast<uint64_t>(a) & bitwise_cast<uint64_t>(b)); |
| } |
| |
| static void testBitAndArgDouble(double a) |
| { |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| Value* argument = root->appendNew<ArgumentRegValue>(proc, Origin(), FPRInfo::argumentFPR0); |
| Value* result = root->appendNew<Value>(proc, BitAnd, Origin(), argument, argument); |
| root->appendNewControlValue(proc, Return, Origin(), result); |
| |
| CHECK(isIdentical(compileAndRun<double>(proc, a), bitAndDouble(a, a))); |
| } |
| |
| static void testBitAndArgsDouble(double a, double b) |
| { |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| Value* argumentA = root->appendNew<ArgumentRegValue>(proc, Origin(), FPRInfo::argumentFPR0); |
| Value* argumentB = root->appendNew<ArgumentRegValue>(proc, Origin(), FPRInfo::argumentFPR1); |
| Value* result = root->appendNew<Value>(proc, BitAnd, Origin(), argumentA, argumentB); |
| root->appendNewControlValue(proc, Return, Origin(), result); |
| |
| CHECK(isIdentical(compileAndRun<double>(proc, a, b), bitAndDouble(a, b))); |
| } |
| |
| static void testBitAndArgImmDouble(double a, double b) |
| { |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| Value* argumentA = root->appendNew<ArgumentRegValue>(proc, Origin(), FPRInfo::argumentFPR0); |
| Value* argumentB = root->appendNew<ConstDoubleValue>(proc, Origin(), b); |
| Value* result = root->appendNew<Value>(proc, BitAnd, Origin(), argumentA, argumentB); |
| root->appendNewControlValue(proc, Return, Origin(), result); |
| |
| CHECK(isIdentical(compileAndRun<double>(proc, a, b), bitAndDouble(a, b))); |
| } |
| |
| static void testBitAndImmsDouble(double a, double b) |
| { |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| Value* argumentA = root->appendNew<ConstDoubleValue>(proc, Origin(), a); |
| Value* argumentB = root->appendNew<ConstDoubleValue>(proc, Origin(), b); |
| Value* result = root->appendNew<Value>(proc, BitAnd, Origin(), argumentA, argumentB); |
| root->appendNewControlValue(proc, Return, Origin(), result); |
| |
| CHECK(isIdentical(compileAndRun<double>(proc), bitAndDouble(a, b))); |
| } |
| |
| static float bitAndFloat(float a, float b) |
| { |
| return bitwise_cast<float>(bitwise_cast<uint32_t>(a) & bitwise_cast<uint32_t>(b)); |
| } |
| |
| static void testBitAndArgFloat(float a) |
| { |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| Value* argument = root->appendNew<Value>(proc, BitwiseCast, Origin(), |
| root->appendNew<Value>(proc, Trunc, Origin(), |
| root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR0))); |
| Value* result = root->appendNew<Value>(proc, BitAnd, Origin(), argument, argument); |
| root->appendNewControlValue(proc, Return, Origin(), result); |
| |
| CHECK(isIdentical(compileAndRun<float>(proc, bitwise_cast<int32_t>(a)), bitAndFloat(a, a))); |
| } |
| |
| static void testBitAndArgsFloat(float a, float b) |
| { |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| Value* argumentA = root->appendNew<Value>(proc, BitwiseCast, Origin(), |
| root->appendNew<Value>(proc, Trunc, Origin(), |
| root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR0))); |
| Value* argumentB = root->appendNew<Value>(proc, BitwiseCast, Origin(), |
| root->appendNew<Value>(proc, Trunc, Origin(), |
| root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR1))); |
| Value* result = root->appendNew<Value>(proc, BitAnd, Origin(), argumentA, argumentB); |
| root->appendNewControlValue(proc, Return, Origin(), result); |
| |
| CHECK(isIdentical(compileAndRun<float>(proc, bitwise_cast<int32_t>(a), bitwise_cast<int32_t>(b)), bitAndFloat(a, b))); |
| } |
| |
| static void testBitAndArgImmFloat(float a, float b) |
| { |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| Value* argumentA = root->appendNew<Value>(proc, BitwiseCast, Origin(), |
| root->appendNew<Value>(proc, Trunc, Origin(), |
| root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR0))); |
| Value* argumentB = root->appendNew<ConstFloatValue>(proc, Origin(), b); |
| Value* result = root->appendNew<Value>(proc, BitAnd, Origin(), argumentA, argumentB); |
| root->appendNewControlValue(proc, Return, Origin(), result); |
| |
| CHECK(isIdentical(compileAndRun<float>(proc, bitwise_cast<int32_t>(a), bitwise_cast<int32_t>(b)), bitAndFloat(a, b))); |
| } |
| |
| static void testBitAndImmsFloat(float a, float b) |
| { |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| Value* argumentA = root->appendNew<ConstFloatValue>(proc, Origin(), a); |
| Value* argumentB = root->appendNew<ConstFloatValue>(proc, Origin(), b); |
| Value* result = root->appendNew<Value>(proc, BitAnd, Origin(), argumentA, argumentB); |
| root->appendNewControlValue(proc, Return, Origin(), result); |
| |
| CHECK(isIdentical(compileAndRun<float>(proc), bitAndFloat(a, b))); |
| } |
| |
| static void testBitAndArgsFloatWithUselessDoubleConversion(float a, float b) |
| { |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| Value* argumentA = root->appendNew<Value>(proc, BitwiseCast, Origin(), |
| root->appendNew<Value>(proc, Trunc, Origin(), |
| root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR0))); |
| Value* argumentB = root->appendNew<Value>(proc, BitwiseCast, Origin(), |
| root->appendNew<Value>(proc, Trunc, Origin(), |
| root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR1))); |
| Value* argumentAasDouble = root->appendNew<Value>(proc, FloatToDouble, Origin(), argumentA); |
| Value* argumentBasDouble = root->appendNew<Value>(proc, FloatToDouble, Origin(), argumentB); |
| Value* doubleResult = root->appendNew<Value>(proc, BitAnd, Origin(), argumentAasDouble, argumentBasDouble); |
| Value* floatResult = root->appendNew<Value>(proc, DoubleToFloat, Origin(), doubleResult); |
| root->appendNewControlValue(proc, Return, Origin(), floatResult); |
| |
| double doubleA = a; |
| double doubleB = b; |
| float expected = static_cast<float>(bitAndDouble(doubleA, doubleB)); |
| CHECK(isIdentical(compileAndRun<float>(proc, bitwise_cast<int32_t>(a), bitwise_cast<int32_t>(b)), expected)); |
| } |
| |
| static void testBitOrArgs(int64_t a, int64_t b) |
| { |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| root->appendNewControlValue( |
| proc, Return, Origin(), |
| root->appendNew<Value>( |
| proc, BitOr, Origin(), |
| root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR0), |
| root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR1))); |
| |
| CHECK(compileAndRun<int64_t>(proc, a, b) == (a | b)); |
| } |
| |
| static void testBitOrSameArg(int64_t a) |
| { |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| Value* argument = root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR0); |
| root->appendNewControlValue( |
| proc, Return, Origin(), |
| root->appendNew<Value>( |
| proc, BitOr, Origin(), |
| argument, |
| argument)); |
| |
| CHECK(compileAndRun<int64_t>(proc, a) == a); |
| } |
| |
| static void testBitOrAndAndArgs(int64_t a, int64_t b, int64_t c) |
| { |
| // We want to check every possible ordering of arguments (to properly check every path in B3ReduceStrength): |
| // ((a & b) | (a & c)) |
| // ((a & b) | (c & a)) |
| // ((b & a) | (a & c)) |
| // ((b & a) | (c & a)) |
| for (int i = 0; i < 4; ++i) { |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| Value* argA = root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR0); |
| Value* argB = root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR1); |
| Value* argC = root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR2); |
| Value* andAB = i & 2 ? root->appendNew<Value>(proc, BitAnd, Origin(), argA, argB) |
| : root->appendNew<Value>(proc, BitAnd, Origin(), argB, argA); |
| Value* andAC = i & 1 ? root->appendNew<Value>(proc, BitAnd, Origin(), argA, argC) |
| : root->appendNew<Value>(proc, BitAnd, Origin(), argC, argA); |
| root->appendNewControlValue( |
| proc, Return, Origin(), |
| root->appendNew<Value>( |
| proc, BitOr, Origin(), |
| andAB, |
| andAC)); |
| |
| CHECK_EQ(compileAndRun<int64_t>(proc, a, b, c), ((a & b) | (a & c))); |
| } |
| } |
| |
| static void testBitOrAndAndArgs32(int32_t a, int32_t b, int32_t c) |
| { |
| // We want to check every possible ordering of arguments (to properly check every path in B3ReduceStrength): |
| // ((a & b) | (a & c)) |
| // ((a & b) | (c & a)) |
| // ((b & a) | (a & c)) |
| // ((b & a) | (c & a)) |
| for (int i = 0; i < 4; ++i) { |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| Value* argA = root->appendNew<Value>(proc, Trunc, Origin(), root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR0)); |
| Value* argB = root->appendNew<Value>(proc, Trunc, Origin(), root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR1)); |
| Value* argC = root->appendNew<Value>(proc, Trunc, Origin(), root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR2)); |
| Value* andAB = i & 2 ? root->appendNew<Value>(proc, BitAnd, Origin(), argA, argB) |
| : root->appendNew<Value>(proc, BitAnd, Origin(), argB, argA); |
| Value* andAC = i & 1 ? root->appendNew<Value>(proc, BitAnd, Origin(), argA, argC) |
| : root->appendNew<Value>(proc, BitAnd, Origin(), argC, argA); |
| root->appendNewControlValue( |
| proc, Return, Origin(), |
| root->appendNew<Value>( |
| proc, BitOr, Origin(), |
| andAB, |
| andAC)); |
| |
| CHECK_EQ(compileAndRun<int32_t>(proc, a, b, c), ((a & b) | (a & c))); |
| } |
| } |
| |
| static void testBitOrAndSameArgs(int64_t a, int64_t b) |
| { |
| // We want to check every possible ordering of arguments (to properly check every path in B3ReduceStrength): |
| // ((a & b) | a) |
| // ((b & a) | a) |
| // (a | (a & b)) |
| // (a | (b & a)) |
| for (int i = 0; i < 4; ++i) { |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| Value* argA = root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR0); |
| Value* argB = root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR1); |
| Value* andAB = i & 1 ? root->appendNew<Value>(proc, BitAnd, Origin(), argA, argB) |
| : root->appendNew<Value>(proc, BitAnd, Origin(), argB, argA); |
| Value* result = i & 2 ? root->appendNew<Value>(proc, BitOr, Origin(), andAB, argA) |
| : root->appendNew<Value>(proc, BitOr, Origin(), argA, andAB); |
| root->appendNewControlValue(proc, Return, Origin(), result); |
| |
| CHECK_EQ(compileAndRun<int64_t>(proc, a, b), ((a & b) | a)); |
| } |
| } |
| |
| static void testBitOrAndSameArgs32(int32_t a, int32_t b) |
| { |
| // We want to check every possible ordering of arguments (to properly check every path in B3ReduceStrength): |
| // ((a & b) | a) |
| // ((b & a) | a) |
| // (a | (a & b)) |
| // (a | (b & a)) |
| for (int i = 0; i < 4; ++i) { |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| Value* argA = root->appendNew<Value>(proc, Trunc, Origin(), root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR0)); |
| Value* argB = root->appendNew<Value>(proc, Trunc, Origin(), root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR1)); |
| Value* andAB = i & 1 ? root->appendNew<Value>(proc, BitAnd, Origin(), argA, argB) |
| : root->appendNew<Value>(proc, BitAnd, Origin(), argB, argA); |
| Value* result = i & 2 ? root->appendNew<Value>(proc, BitOr, Origin(), andAB, argA) |
| : root->appendNew<Value>(proc, BitOr, Origin(), argA, andAB); |
| root->appendNewControlValue(proc, Return, Origin(), result); |
| |
| CHECK_EQ(compileAndRun<int32_t>(proc, a, b), ((a & b) | a)); |
| } |
| } |
| |
| static void testBitOrNotNot(int64_t a, int64_t b) |
| { |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| Value* argA = root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR0); |
| Value* argB = root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR1); |
| Value* notA = root->appendNew<Value>(proc, BitXor, Origin(), argA, root->appendNew<Const64Value>(proc, Origin(), -1)); |
| Value* notB = root->appendNew<Value>(proc, BitXor, Origin(), argB, root->appendNew<Const64Value>(proc, Origin(), -1)); |
| root->appendNewControlValue( |
| proc, Return, Origin(), |
| root->appendNew<Value>( |
| proc, BitOr, Origin(), |
| notA, |
| notB)); |
| |
| CHECK_EQ(compileAndRun<int64_t>(proc, a, b), (~a | ~b)); |
| } |
| |
| static void testBitOrNotNot32(int32_t a, int32_t b) |
| { |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| Value* argA = root->appendNew<Value>(proc, Trunc, Origin(), root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR0)); |
| Value* argB = root->appendNew<Value>(proc, Trunc, Origin(), root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR1)); |
| Value* notA = root->appendNew<Value>(proc, BitXor, Origin(), argA, root->appendNew<Const32Value>(proc, Origin(), -1)); |
| Value* notB = root->appendNew<Value>(proc, BitXor, Origin(), argB, root->appendNew<Const32Value>(proc, Origin(), -1)); |
| root->appendNewControlValue( |
| proc, Return, Origin(), |
| root->appendNew<Value>( |
| proc, BitOr, Origin(), |
| notA, |
| notB)); |
| |
| CHECK_EQ(compileAndRun<int32_t>(proc, a, b), (~a | ~b)); |
| } |
| |
| static void testBitOrNotImm(int64_t a, int64_t b) |
| { |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| Value* argA = root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR0); |
| Value* notA = root->appendNew<Value>(proc, BitXor, Origin(), argA, root->appendNew<Const64Value>(proc, Origin(), -1)); |
| Value* cstB = root->appendNew<Const64Value>(proc, Origin(), b); |
| root->appendNewControlValue( |
| proc, Return, Origin(), |
| root->appendNew<Value>( |
| proc, BitOr, Origin(), |
| notA, |
| cstB)); |
| |
| CHECK_EQ(compileAndRun<int64_t>(proc, a, b), (~a | b)); |
| } |
| |
| static void testBitOrNotImm32(int32_t a, int32_t b) |
| { |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| Value* argA = root->appendNew<Value>(proc, Trunc, Origin(), root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR0)); |
| Value* notA = root->appendNew<Value>(proc, BitXor, Origin(), argA, root->appendNew<Const32Value>(proc, Origin(), -1)); |
| Value* cstB = root->appendNew<Const32Value>(proc, Origin(), b); |
| root->appendNewControlValue( |
| proc, Return, Origin(), |
| root->appendNew<Value>( |
| proc, BitOr, Origin(), |
| notA, |
| cstB)); |
| |
| CHECK_EQ(compileAndRun<int32_t>(proc, a), (~a | b)); |
| } |
| |
| static void testBitOrImms(int64_t a, int64_t b) |
| { |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| root->appendNewControlValue( |
| proc, Return, Origin(), |
| root->appendNew<Value>( |
| proc, BitOr, Origin(), |
| root->appendNew<Const64Value>(proc, Origin(), a), |
| root->appendNew<Const64Value>(proc, Origin(), b))); |
| |
| CHECK(compileAndRun<int64_t>(proc) == (a | b)); |
| } |
| |
| static void testBitOrArgImm(int64_t a, int64_t b) |
| { |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| root->appendNewControlValue( |
| proc, Return, Origin(), |
| root->appendNew<Value>( |
| proc, BitOr, Origin(), |
| root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR0), |
| root->appendNew<Const64Value>(proc, Origin(), b))); |
| |
| CHECK(compileAndRun<int64_t>(proc, a) == (a | b)); |
| } |
| |
| static void testBitOrImmArg(int64_t a, int64_t b) |
| { |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| root->appendNewControlValue( |
| proc, Return, Origin(), |
| root->appendNew<Value>( |
| proc, BitOr, Origin(), |
| root->appendNew<Const64Value>(proc, Origin(), a), |
| root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR0))); |
| |
| CHECK(compileAndRun<int64_t>(proc, b) == (a | b)); |
| } |
| |
| static void testBitOrBitOrArgImmImm(int64_t a, int64_t b, int64_t c) |
| { |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| Value* innerBitOr = root->appendNew<Value>( |
| proc, BitOr, Origin(), |
| root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR0), |
| root->appendNew<Const64Value>(proc, Origin(), b)); |
| root->appendNewControlValue( |
| proc, Return, Origin(), |
| root->appendNew<Value>( |
| proc, BitOr, Origin(), |
| innerBitOr, |
| root->appendNew<Const64Value>(proc, Origin(), c))); |
| |
| CHECK(compileAndRun<int64_t>(proc, a) == ((a | b) | c)); |
| } |
| |
| static void testBitOrImmBitOrArgImm(int64_t a, int64_t b, int64_t c) |
| { |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| Value* innerBitOr = root->appendNew<Value>( |
| proc, BitOr, Origin(), |
| root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR0), |
| root->appendNew<Const64Value>(proc, Origin(), c)); |
| root->appendNewControlValue( |
| proc, Return, Origin(), |
| root->appendNew<Value>( |
| proc, BitOr, Origin(), |
| root->appendNew<Const64Value>(proc, Origin(), a), |
| innerBitOr)); |
| |
| CHECK(compileAndRun<int64_t>(proc, b) == (a | (b | c))); |
| } |
| |
| static void testBitOrArgs32(int a, int b) |
| { |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| root->appendNewControlValue( |
| proc, Return, Origin(), |
| root->appendNew<Value>( |
| proc, BitOr, Origin(), |
| root->appendNew<Value>( |
| proc, Trunc, Origin(), |
| root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR0)), |
| root->appendNew<Value>( |
| proc, Trunc, Origin(), |
| root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR1)))); |
| |
| CHECK(compileAndRun<int>(proc, a, b) == (a | b)); |
| } |
| |
| static void testBitOrSameArg32(int a) |
| { |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| Value* argument = root->appendNew<Value>( |
| proc, Trunc, Origin(), |
| root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR0)); |
| root->appendNewControlValue( |
| proc, Return, Origin(), |
| root->appendNew<Value>( |
| proc, BitOr, Origin(), |
| argument, |
| argument)); |
| |
| CHECK(compileAndRun<int>(proc, a) == a); |
| } |
| |
| static void testBitOrImms32(int a, int b) |
| { |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| root->appendNewControlValue( |
| proc, Return, Origin(), |
| root->appendNew<Value>( |
| proc, BitOr, Origin(), |
| root->appendNew<Const32Value>(proc, Origin(), a), |
| root->appendNew<Const32Value>(proc, Origin(), b))); |
| |
| CHECK(compileAndRun<int>(proc) == (a | b)); |
| } |
| |
| static void testBitOrArgImm32(int a, int b) |
| { |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| root->appendNewControlValue( |
| proc, Return, Origin(), |
| root->appendNew<Value>( |
| proc, BitOr, Origin(), |
| root->appendNew<Value>( |
| proc, Trunc, Origin(), |
| root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR0)), |
| root->appendNew<Const32Value>(proc, Origin(), b))); |
| |
| CHECK(compileAndRun<int>(proc, a) == (a | b)); |
| } |
| |
| static void testBitOrImmArg32(int a, int b) |
| { |
| Procedure proc; |
| BasicBlock* root = proc.addBlock(); |
| root->appendNewControlValue( |
| proc, Return, Origin(), |
| root->appendNew<Value>( |
| proc, BitOr, Origin(), |
| root->appendNew<Const32Value>(proc, Origin(), a), |
| root->appendNew<Value>( |
| proc, Trunc, Origin(), |
| root->appendNew<ArgumentRegValue>(proc, Origin(), GPRInfo::argumentGPR0)))); |
| |
| CHECK(compileAndRun<int>(proc, b) == (a | b)); |
| } |
| |
| void addBitTests(const char* filter, Deque<RefPtr<SharedTask<void()>>>& tasks) |
| { |
| RUN(testUbfx32ShiftAnd()); |
| RUN(testUbfx32AndShift()); |
| RUN(testUbfx64ShiftAnd()); |
| RUN(testUbfx64AndShift()); |
| RUN(testUbfiz32AndShiftValueMask()); |
| RUN(testUbfiz32AndShiftMaskValue()); |
| RUN(testUbfiz32ShiftAnd()); |
| RUN(testUbfiz32AndShift()); |
| RUN(testUbfiz64AndShiftValueMask()); |
| RUN(testUbfiz64AndShiftMaskValue()); |
| RUN(testUbfiz64ShiftAnd()); |
| RUN(testUbfiz64AndShift()); |
| RUN(testInsertBitField32()); |
| RUN(testInsertBitField64()); |
| RUN(testExtractInsertBitfieldAtLowEnd32()); |
| RUN(testExtractInsertBitfieldAtLowEnd64()); |
| RUN(testBIC32()); |
| RUN(testBIC64()); |
| RUN(testOrNot32()); |
| RUN(testOrNot64()); |
| RUN(testXorNot32()); |
| RUN(testXorNot64()); |
| RUN(testXorNotWithLeftShift32()); |
| RUN(testXorNotWithRightShift32()); |
| RUN(testXorNotWithUnsignedRightShift32()); |
| RUN(testXorNotWithLeftShift64()); |
| RUN(testXorNotWithRightShift64()); |
| RUN(testXorNotWithUnsignedRightShift64()); |
| RUN(testBitfieldZeroExtend32()); |
| RUN(testBitfieldZeroExtend64()); |
| RUN(testExtractRegister32()); |
| RUN(testExtractRegister64()); |
| RUN(testInsertSignedBitfieldInZero32()); |
| RUN(testInsertSignedBitfieldInZero64()); |
| RUN(testExtractSignedBitfield32()); |
| RUN(testExtractSignedBitfield64()); |
| RUN(testAddWithLeftShift32()); |
| RUN(testAddWithRightShift32()); |
| RUN(testAddWithUnsignedRightShift32()); |
| RUN(testAddWithLeftShift64()); |
| RUN(testAddWithRightShift64()); |
| RUN(testAddWithUnsignedRightShift64()); |
| RUN(testSubWithLeftShift32()); |
| RUN(testSubWithRightShift32()); |
| RUN(testSubWithUnsignedRightShift32()); |
| RUN(testSubWithLeftShift64()); |
| RUN(testSubWithRightShift64()); |
| RUN(testSubWithUnsignedRightShift64()); |
| |
| RUN(testAndLeftShift32()); |
| RUN(testAndRightShift32()); |
| RUN(testAndUnsignedRightShift32()); |
| RUN(testAndLeftShift64()); |
| RUN(testAndRightShift64()); |
| RUN(testAndUnsignedRightShift64()); |
| |
| RUN(testXorLeftShift32()); |
| RUN(testXorRightShift32()); |
| RUN(testXorUnsignedRightShift32()); |
| RUN(testXorLeftShift64()); |
| RUN(testXorRightShift64()); |
| RUN(testXorUnsignedRightShift64()); |
| |
| RUN(testOrLeftShift32()); |
| RUN(testOrRightShift32()); |
| RUN(testOrUnsignedRightShift32()); |
| RUN(testOrLeftShift64()); |
| RUN(testOrRightShift64()); |
| RUN(testOrUnsignedRightShift64()); |
| |
| RUN(testBitAndZeroShiftRightArgImmMask32()); |
| RUN(testBitAndZeroShiftRightArgImmMask64()); |
| RUN(testBitAndArgs(43, 43)); |
| RUN(testBitAndArgs(43, 0)); |
| RUN(testBitAndArgs(10, 3)); |
| RUN(testBitAndArgs(42, 0xffffffffffffffff)); |
| RUN(testBitAndSameArg(43)); |
| RUN(testBitAndSameArg(0)); |
| RUN(testBitAndSameArg(3)); |
| RUN(testBitAndSameArg(0xffffffffffffffff)); |
| RUN(testBitAndImms(43, 43)); |
| RUN(testBitAndImms(43, 0)); |
| RUN(testBitAndImms(10, 3)); |
| RUN(testBitAndImms(42, 0xffffffffffffffff)); |
| RUN(testBitAndArgImm(43, 43)); |
| RUN(testBitAndArgImm(43, 0)); |
| RUN(testBitAndArgImm(10, 3)); |
| RUN(testBitAndArgImm(42, 0xffffffffffffffff)); |
| RUN(testBitAndArgImm(42, 0xff)); |
| RUN(testBitAndArgImm(300, 0xff)); |
| RUN(testBitAndArgImm(-300, 0xff)); |
| RUN(testBitAndArgImm(42, 0xffff)); |
| RUN(testBitAndArgImm(40000, 0xffff)); |
| RUN(testBitAndArgImm(-40000, 0xffff)); |
| RUN(testBitAndImmArg(43, 43)); |
| RUN(testBitAndImmArg(43, 0)); |
| RUN(testBitAndImmArg(10, 3)); |
| RUN(testBitAndImmArg(42, 0xffffffffffffffff)); |
| RUN(testBitAndBitAndArgImmImm(2, 7, 3)); |
| RUN(testBitAndBitAndArgImmImm(1, 6, 6)); |
| RUN(testBitAndBitAndArgImmImm(0xffff, 24, 7)); |
| RUN(testBitAndImmBitAndArgImm(7, 2, 3)); |
| RUN(testBitAndImmBitAndArgImm(6, 1, 6)); |
| RUN(testBitAndImmBitAndArgImm(24, 0xffff, 7)); |
| RUN(testBitAndArgs32(43, 43)); |
| RUN(testBitAndArgs32(43, 0)); |
| RUN(testBitAndArgs32(10, 3)); |
| RUN(testBitAndArgs32(42, 0xffffffff)); |
| RUN(testBitAndSameArg32(43)); |
| RUN(testBitAndSameArg32(0)); |
| RUN(testBitAndSameArg32(3)); |
| RUN(testBitAndSameArg32(0xffffffff)); |
| RUN(testBitAndImms32(43, 43)); |
| RUN(testBitAndImms32(43, 0)); |
| RUN(testBitAndImms32(10, 3)); |
| RUN(testBitAndImms32(42, 0xffffffff)); |
| RUN(testBitAndArgImm32(43, 43)); |
| RUN(testBitAndArgImm32(43, 0)); |
| RUN(testBitAndArgImm32(10, 3)); |
| RUN(testBitAndArgImm32(42, 0xffffffff)); |
| RUN(testBitAndImmArg32(43, 43)); |
| RUN(testBitAndImmArg32(43, 0)); |
| RUN(testBitAndImmArg32(10, 3)); |
| RUN(testBitAndImmArg32(42, 0xffffffff)); |
| RUN(testBitAndImmArg32(42, 0xff)); |
| RUN(testBitAndImmArg32(300, 0xff)); |
| RUN(testBitAndImmArg32(-300, 0xff)); |
| RUN(testBitAndImmArg32(42, 0xffff)); |
| RUN(testBitAndImmArg32(40000, 0xffff)); |
| RUN(testBitAndImmArg32(-40000, 0xffff)); |
| RUN(testBitAndBitAndArgImmImm32(2, 7, 3)); |
| RUN(testBitAndBitAndArgImmImm32(1, 6, 6)); |
| RUN(testBitAndBitAndArgImmImm32(0xffff, 24, 7)); |
| RUN(testBitAndImmBitAndArgImm32(7, 2, 3)); |
| RUN(testBitAndImmBitAndArgImm32(6, 1, 6)); |
| RUN(testBitAndImmBitAndArgImm32(24, 0xffff, 7)); |
| RUN_BINARY(testBitAndWithMaskReturnsBooleans, int64Operands(), int64Operands()); |
| RUN_UNARY(testBitAndArgDouble, floatingPointOperands<double>()); |
| RUN_BINARY(testBitAndArgsDouble, floatingPointOperands<double>(), floatingPointOperands<double>()); |
| RUN_BINARY(testBitAndArgImmDouble, floatingPointOperands<double>(), floatingPointOperands<double>()); |
| RUN_BINARY(testBitAndImmsDouble, floatingPointOperands<double>(), floatingPointOperands<double>()); |
| RUN_UNARY(testBitAndArgFloat, floatingPointOperands<float>()); |
| RUN_BINARY(testBitAndArgsFloat, floatingPointOperands<float>(), floatingPointOperands<float>()); |
| RUN_BINARY(testBitAndArgImmFloat, floatingPointOperands<float>(), floatingPointOperands<float>()); |
| RUN_BINARY(testBitAndImmsFloat, floatingPointOperands<float>(), floatingPointOperands<float>()); |
| RUN_BINARY(testBitAndArgsFloatWithUselessDoubleConversion, floatingPointOperands<float>(), floatingPointOperands<float>()); |
| RUN_BINARY(testBitAndNotNot, int64Operands(), int64Operands()); |
| RUN_BINARY(testBitAndNotNot32, int32Operands(), int32Operands()); |
| RUN_BINARY(testBitAndNotImm, int64Operands(), int64Operands()); |
| RUN_BINARY(testBitAndNotImm32, int32Operands(), int32Operands()); |
| |
| RUN(testBitOrArgs(43, 43)); |
| RUN(testBitOrArgs(43, 0)); |
| RUN(testBitOrArgs(10, 3)); |
| RUN(testBitOrArgs(42, 0xffffffffffffffff)); |
| RUN(testBitOrSameArg(43)); |
| RUN(testBitOrSameArg(0)); |
| RUN(testBitOrSameArg(3)); |
| RUN(testBitOrSameArg(0xffffffffffffffff)); |
| RUN(testBitOrImms(43, 43)); |
| RUN(testBitOrImms(43, 0)); |
| RUN(testBitOrImms(10, 3)); |
| RUN(testBitOrImms(42, 0xffffffffffffffff)); |
| RUN(testBitOrArgImm(43, 43)); |
| RUN(testBitOrArgImm(43, 0)); |
| RUN(testBitOrArgImm(10, 3)); |
| RUN(testBitOrArgImm(42, 0xffffffffffffffff)); |
| RUN(testBitOrImmArg(43, 43)); |
| RUN(testBitOrImmArg(43, 0)); |
| RUN(testBitOrImmArg(10, 3)); |
| RUN(testBitOrImmArg(42, 0xffffffffffffffff)); |
| RUN(testBitOrBitOrArgImmImm(2, 7, 3)); |
| RUN(testBitOrBitOrArgImmImm(1, 6, 6)); |
| RUN(testBitOrBitOrArgImmImm(0xffff, 24, 7)); |
| RUN(testBitOrImmBitOrArgImm(7, 2, 3)); |
| RUN(testBitOrImmBitOrArgImm(6, 1, 6)); |
| RUN(testBitOrImmBitOrArgImm(24, 0xffff, 7)); |
| RUN(testBitOrArgs32(43, 43)); |
| RUN(testBitOrArgs32(43, 0)); |
| RUN(testBitOrArgs32(10, 3)); |
| RUN(testBitOrArgs32(42, 0xffffffff)); |
| RUN(testBitOrSameArg32(43)); |
| RUN(testBitOrSameArg32(0)); |
| RUN(testBitOrSameArg32(3)); |
| RUN(testBitOrSameArg32(0xffffffff)); |
| RUN(testBitOrImms32(43, 43)); |
| RUN(testBitOrImms32(43, 0)); |
| RUN(testBitOrImms32(10, 3)); |
| RUN(testBitOrImms32(42, 0xffffffff)); |
| RUN(testBitOrArgImm32(43, 43)); |
| RUN(testBitOrArgImm32(43, 0)); |
| RUN(testBitOrArgImm32(10, 3)); |
| RUN(testBitOrArgImm32(42, 0xffffffff)); |
| RUN(testBitOrImmArg32(43, 43)); |
| RUN(testBitOrImmArg32(43, 0)); |
| RUN(testBitOrImmArg32(10, 3)); |
| RUN(testBitOrImmArg32(42, 0xffffffff)); |
| RUN(testBitOrBitOrArgImmImm32(2, 7, 3)); |
| RUN(testBitOrBitOrArgImmImm32(1, 6, 6)); |
| RUN(testBitOrBitOrArgImmImm32(0xffff, 24, 7)); |
| RUN(testBitOrImmBitOrArgImm32(7, 2, 3)); |
| RUN(testBitOrImmBitOrArgImm32(6, 1, 6)); |
| RUN(testBitOrImmBitOrArgImm32(24, 0xffff, 7)); |
| RUN_UNARY(testBitOrArgDouble, floatingPointOperands<double>()); |
| RUN_BINARY(testBitOrArgsDouble, floatingPointOperands<double>(), floatingPointOperands<double>()); |
| RUN_BINARY(testBitOrArgImmDouble, floatingPointOperands<double>(), floatingPointOperands<double>()); |
| RUN_BINARY(testBitOrImmsDouble, floatingPointOperands<double>(), floatingPointOperands<double>()); |
| RUN_UNARY(testBitOrArgFloat, floatingPointOperands<float>()); |
| RUN_BINARY(testBitOrArgsFloat, floatingPointOperands<float>(), floatingPointOperands<float>()); |
| RUN_BINARY(testBitOrArgImmFloat, floatingPointOperands<float>(), floatingPointOperands<float>()); |
| RUN_BINARY(testBitOrImmsFloat, floatingPointOperands<float>(), floatingPointOperands<float>()); |
| RUN_BINARY(testBitOrArgsFloatWithUselessDoubleConversion, floatingPointOperands<float>(), floatingPointOperands<float>()); |
| RUN_TERNARY(testBitOrAndAndArgs, int64Operands(), int64Operands(), int64Operands()); |
| RUN_TERNARY(testBitOrAndAndArgs32, int32Operands(), int32Operands(), int32Operands()); |
| RUN_BINARY(testBitOrAndSameArgs, int64Operands(), int64Operands()); |
| RUN_BINARY(testBitOrAndSameArgs32, int32Operands(), int32Operands()); |
| RUN_BINARY(testBitOrNotNot, int64Operands(), int64Operands()); |
| RUN_BINARY(testBitOrNotNot32, int32Operands(), int32Operands()); |
| RUN_BINARY(testBitOrNotImm, int64Operands(), int64Operands()); |
| RUN_BINARY(testBitOrNotImm32, int32Operands(), int32Operands()); |
| |
| RUN_BINARY(testBitXorArgs, int64Operands(), int64Operands()); |
| RUN_UNARY(testBitXorSameArg, int64Operands()); |
| RUN_BINARY(testBitXorImms, int64Operands(), int64Operands()); |
| RUN_BINARY(testBitXorArgImm, int64Operands(), int64Operands()); |
| RUN_BINARY(testBitXorImmArg, int64Operands(), int64Operands()); |
| RUN(testBitXorBitXorArgImmImm(2, 7, 3)); |
| RUN(testBitXorBitXorArgImmImm(1, 6, 6)); |
| RUN(testBitXorBitXorArgImmImm(0xffff, 24, 7)); |
| RUN(testBitXorImmBitXorArgImm(7, 2, 3)); |
| RUN(testBitXorImmBitXorArgImm(6, 1, 6)); |
| RUN(testBitXorImmBitXorArgImm(24, 0xffff, 7)); |
| RUN(testBitXorArgs32(43, 43)); |
| RUN(testBitXorArgs32(43, 0)); |
| RUN(testBitXorArgs32(10, 3)); |
| RUN(testBitXorArgs32(42, 0xffffffff)); |
| RUN(testBitXorSameArg32(43)); |
| RUN(testBitXorSameArg32(0)); |
| RUN(testBitXorSameArg32(3)); |
| RUN(testBitXorSameArg32(0xffffffff)); |
| RUN(testBitXorImms32(43, 43)); |
| RUN(testBitXorImms32(43, 0)); |
| RUN(testBitXorImms32(10, 3)); |
| RUN(testBitXorImms32(42, 0xffffffff)); |
| RUN(testBitXorArgImm32(43, 43)); |
| RUN(testBitXorArgImm32(43, 0)); |
| RUN(testBitXorArgImm32(10, 3)); |
| RUN(testBitXorArgImm32(42, 0xffffffff)); |
| RUN(testBitXorImmArg32(43, 43)); |
| RUN(testBitXorImmArg32(43, 0)); |
| RUN(testBitXorImmArg32(10, 3)); |
| RUN(testBitXorImmArg32(42, 0xffffffff)); |
| RUN(testBitXorBitXorArgImmImm32(2, 7, 3)); |
| RUN(testBitXorBitXorArgImmImm32(1, 6, 6)); |
| RUN(testBitXorBitXorArgImmImm32(0xffff, 24, 7)); |
| RUN(testBitXorImmBitXorArgImm32(7, 2, 3)); |
| RUN(testBitXorImmBitXorArgImm32(6, 1, 6)); |
| RUN(testBitXorImmBitXorArgImm32(24, 0xffff, 7)); |
| RUN_TERNARY(testBitXorAndAndArgs, int64Operands(), int64Operands(), int64Operands()); |
| RUN_TERNARY(testBitXorAndAndArgs32, int32Operands(), int32Operands(), int32Operands()); |
| RUN_BINARY(testBitXorAndSameArgs, int64Operands(), int64Operands()); |
| RUN_BINARY(testBitXorAndSameArgs32, int32Operands(), int32Operands()); |
| |
| RUN_UNARY(testBitNotArg, int64Operands()); |
| RUN_UNARY(testBitNotImm, int64Operands()); |
| RUN_UNARY(testBitNotMem, int64Operands()); |
| RUN_UNARY(testBitNotArg32, int32Operands()); |
| RUN_UNARY(testBitNotImm32, int32Operands()); |
| RUN_UNARY(testBitNotMem32, int32Operands()); |
| RUN_BINARY(testNotOnBooleanAndBranch32, int32Operands(), int32Operands()); |
| RUN_BINARY(testBitNotOnBooleanAndBranch32, int32Operands(), int32Operands()); |
| |
| RUN_BINARY(testBitXorTreeArgs, int64Operands(), int64Operands()); |
| RUN_BINARY(testBitXorTreeArgsEven, int64Operands(), int64Operands()); |
| RUN_BINARY(testBitXorTreeArgImm, int64Operands(), int64Operands()); |
| RUN_UNARY(testBitAndTreeArg32, int32Operands()); |
| RUN_UNARY(testBitOrTreeArg32, int32Operands()); |
| |
| RUN(testLoadZeroExtendIndexAddress()); |
| RUN(testLoadSignExtendIndexAddress()); |
| RUN(testStoreZeroExtendIndexAddress()); |
| RUN(testStoreSignExtendIndexAddress()); |
| } |
| |
| #endif // ENABLE(B3_JIT) |