| This test runs the WebGL Test listed below in an iframe and reports PASS or FAIL. |
| |
| Test: ../../resources/webgl_test_files/conformance/extensions/oes-texture-half-float-linear.html |
| [ 1: PASS ] Successfully enabled OES_texture_half_float extension |
| [ 2: PASS ] getError was expected value: NO_ERROR : OES_texture_half_float texture with non-Linear filter should succeed with NO_ERROR no matter whether OES_texture_half_float_linear is enabled or not |
| [ 3: PASS ] should be 255,255,255,255 |
| [ 4: PASS ] getError was expected value: NO_ERROR : OES_texture_half_float texture with Linear filter should produce [0, 0, 0, 1.0] with NO_ERROR if OES_texture_half_float_linear isn't enabled |
| [ 5: FAIL ] should be 0,0,0,255 at (0, 0) expected: 0,0,0,255 was 255,255,255,255 |
| [ 6: PASS ] getError was expected value: NO_ERROR : should be no errors during texture setup |
| [ 7: PASS ] getError was expected value: NO_ERROR : OES_texture_half_float texture with non-Linear filter should succeed with NO_ERROR no matter whether OES_texture_half_float_linear is enabled or not |
| [ 8: PASS ] should be 255,255,255,255 |
| [ 9: PASS ] getError was expected value: NO_ERROR : should be no errors during texture setup |
| [ 10: PASS ] getError was expected value: NO_ERROR : OES_texture_half_float texture with Linear filter should produce [0, 0, 0, 1.0] with NO_ERROR if OES_texture_half_float_linear isn't enabled |
| [ 11: FAIL ] should be 0,0,0,255 at (0, 0) expected: 0,0,0,255 was 255,255,255,255 |
| [ 12: PASS ] getError was expected value: NO_ERROR : should be no errors during texture setup |
| [ 13: PASS ] getError was expected value: NO_ERROR : OES_texture_half_float texture with Linear filter should produce [0, 0, 0, 1.0] with NO_ERROR if OES_texture_half_float_linear isn't enabled |
| [ 14: FAIL ] should be 0,0,0,255 at (0, 0) expected: 0,0,0,255 was 255,255,255,255 |
| [ 15: PASS ] getError was expected value: NO_ERROR : should be no errors during texture setup |
| [ 16: PASS ] getError was expected value: NO_ERROR : OES_texture_half_float texture with Linear filter should produce [0, 0, 0, 1.0] with NO_ERROR if OES_texture_half_float_linear isn't enabled |
| [ 17: FAIL ] should be 0,0,0,255 at (0, 0) expected: 0,0,0,255 was 255,255,255,255 |
| [ 18: PASS ] getError was expected value: NO_ERROR : OES_texture_half_float texture with Linear filter should produce [0, 0, 0, 1.0] with NO_ERROR if OES_texture_half_float_linear isn't enabled |
| [ 19: FAIL ] should be 0,0,0,255 at (0, 0) expected: 0,0,0,255 was 255,255,255,255 |
| [ 20: PASS ] getError was expected value: NO_ERROR : OES_texture_half_float texture with Linear filter should produce [0, 0, 0, 1.0] with NO_ERROR if OES_texture_half_float_linear isn't enabled |
| [ 21: FAIL ] should be 0,0,0,255 at (0, 0) expected: 0,0,0,255 was 255,255,255,255 |
| [ 22: PASS ] getError was expected value: NO_ERROR : should be no errors during texture setup |
| [ 23: PASS ] getError was expected value: NO_ERROR : OES_texture_half_float texture with Linear filter should produce [0, 0, 0, 1.0] with NO_ERROR if OES_texture_half_float_linear isn't enabled |
| [ 24: FAIL ] should be 0,0,0,255 at (0, 0) expected: 0,0,0,255 was 255,255,255,255 |
| [ 25: PASS ] getError was expected value: NO_ERROR : should be no errors during texture setup |
| [ 26: PASS ] getError was expected value: NO_ERROR : OES_texture_half_float texture with Linear filter should produce [0, 0, 0, 1.0] with NO_ERROR if OES_texture_half_float_linear isn't enabled |
| [ 27: FAIL ] should be 0,0,0,255 at (0, 0) expected: 0,0,0,255 was 255,255,255,255 |
| [ 28: PASS ] getError was expected value: NO_ERROR : should be no errors during texture setup |
| [ 29: PASS ] getError was expected value: NO_ERROR : OES_texture_half_float texture with Linear filter should produce [0, 0, 0, 1.0] with NO_ERROR if OES_texture_half_float_linear isn't enabled |
| [ 30: FAIL ] should be 0,0,0,255 at (0, 0) expected: 0,0,0,255 was 255,255,255,255 |
| [ 31: PASS ] getError was expected value: NO_ERROR : should be no errors during texture setup |
| [ 32: PASS ] getError was expected value: NO_ERROR : OES_texture_half_float texture with Linear filter should produce [0, 0, 0, 1.0] with NO_ERROR if OES_texture_half_float_linear isn't enabled |
| [ 33: FAIL ] should be 0,0,0,255 at (0, 0) expected: 0,0,0,255 was 255,255,255,255 |
| [ 34: PASS ] getError was expected value: NO_ERROR : OES_texture_half_float texture with non-Linear filter should succeed with NO_ERROR no matter whether OES_texture_half_float_linear is enabled or not |
| [ 35: PASS ] should be 255,255,255,255 |
| [ 36: PASS ] getError was expected value: NO_ERROR : OES_texture_half_float texture with Linear filter should produce [0, 0, 0, 1.0] with NO_ERROR if OES_texture_half_float_linear isn't enabled |
| [ 37: FAIL ] should be 0,0,0,255 at (0, 0) expected: 0,0,0,255 was 255,255,255,255 |
| [ 38: PASS ] getError was expected value: NO_ERROR : should be no errors during texture setup |
| [ 39: PASS ] getError was expected value: NO_ERROR : OES_texture_half_float texture with non-Linear filter should succeed with NO_ERROR no matter whether OES_texture_half_float_linear is enabled or not |
| [ 40: PASS ] should be 255,255,255,255 |
| [ 41: PASS ] getError was expected value: NO_ERROR : should be no errors during texture setup |
| [ 42: PASS ] getError was expected value: NO_ERROR : OES_texture_half_float texture with Linear filter should produce [0, 0, 0, 1.0] with NO_ERROR if OES_texture_half_float_linear isn't enabled |
| [ 43: FAIL ] should be 0,0,0,255 at (0, 0) expected: 0,0,0,255 was 255,255,255,255 |
| [ 44: PASS ] getError was expected value: NO_ERROR : should be no errors during texture setup |
| [ 45: PASS ] getError was expected value: NO_ERROR : OES_texture_half_float texture with Linear filter should produce [0, 0, 0, 1.0] with NO_ERROR if OES_texture_half_float_linear isn't enabled |
| [ 46: FAIL ] should be 0,0,0,255 at (0, 0) expected: 0,0,0,255 was 255,255,255,255 |
| [ 47: PASS ] getError was expected value: NO_ERROR : should be no errors during texture setup |
| [ 48: PASS ] getError was expected value: NO_ERROR : OES_texture_half_float texture with Linear filter should produce [0, 0, 0, 1.0] with NO_ERROR if OES_texture_half_float_linear isn't enabled |
| [ 49: FAIL ] should be 0,0,0,255 at (0, 0) expected: 0,0,0,255 was 255,255,255,255 |
| [ 50: PASS ] getError was expected value: NO_ERROR : OES_texture_half_float texture with Linear filter should produce [0, 0, 0, 1.0] with NO_ERROR if OES_texture_half_float_linear isn't enabled |
| [ 51: FAIL ] should be 0,0,0,255 at (0, 0) expected: 0,0,0,255 was 255,255,255,255 |
| [ 52: PASS ] getError was expected value: NO_ERROR : OES_texture_half_float texture with Linear filter should produce [0, 0, 0, 1.0] with NO_ERROR if OES_texture_half_float_linear isn't enabled |
| [ 53: FAIL ] should be 0,0,0,255 at (0, 0) expected: 0,0,0,255 was 255,255,255,255 |
| [ 54: PASS ] getError was expected value: NO_ERROR : should be no errors during texture setup |
| [ 55: PASS ] getError was expected value: NO_ERROR : OES_texture_half_float texture with Linear filter should produce [0, 0, 0, 1.0] with NO_ERROR if OES_texture_half_float_linear isn't enabled |
| [ 56: FAIL ] should be 0,0,0,255 at (0, 0) expected: 0,0,0,255 was 255,255,255,255 |
| [ 57: PASS ] getError was expected value: NO_ERROR : should be no errors during texture setup |
| [ 58: PASS ] getError was expected value: NO_ERROR : OES_texture_half_float texture with Linear filter should produce [0, 0, 0, 1.0] with NO_ERROR if OES_texture_half_float_linear isn't enabled |
| [ 59: FAIL ] should be 0,0,0,255 at (0, 0) expected: 0,0,0,255 was 255,255,255,255 |
| [ 60: PASS ] getError was expected value: NO_ERROR : should be no errors during texture setup |
| [ 61: PASS ] getError was expected value: NO_ERROR : OES_texture_half_float texture with Linear filter should produce [0, 0, 0, 1.0] with NO_ERROR if OES_texture_half_float_linear isn't enabled |
| [ 62: FAIL ] should be 0,0,0,255 at (0, 0) expected: 0,0,0,255 was 255,255,255,255 |
| [ 63: PASS ] getError was expected value: NO_ERROR : should be no errors during texture setup |
| [ 64: PASS ] getError was expected value: NO_ERROR : OES_texture_half_float texture with Linear filter should produce [0, 0, 0, 1.0] with NO_ERROR if OES_texture_half_float_linear isn't enabled |
| [ 65: FAIL ] should be 0,0,0,255 at (0, 0) expected: 0,0,0,255 was 255,255,255,255 |
| [ 66: PASS ] getError was expected value: NO_ERROR : OES_texture_half_float texture with non-Linear filter should succeed with NO_ERROR no matter whether OES_texture_half_float_linear is enabled or not |
| [ 67: PASS ] should be 255,255,255,255 |
| [ 68: PASS ] getError was expected value: NO_ERROR : OES_texture_half_float texture with Linear filter should succeed with NO_ERROR if OES_texture_half_float is enabled |
| [ 69: PASS ] should be 255,255,255,255 |
| [ 70: PASS ] getError was expected value: NO_ERROR : should be no errors during texture setup |
| [ 71: PASS ] getError was expected value: NO_ERROR : OES_texture_half_float texture with non-Linear filter should succeed with NO_ERROR no matter whether OES_texture_half_float_linear is enabled or not |
| [ 72: PASS ] should be 255,255,255,255 |
| [ 73: PASS ] getError was expected value: NO_ERROR : should be no errors during texture setup |
| [ 74: PASS ] getError was expected value: NO_ERROR : OES_texture_half_float texture with Linear filter should succeed with NO_ERROR if OES_texture_half_float is enabled |
| [ 75: PASS ] should be 255,255,255,255 |
| [ 76: PASS ] getError was expected value: NO_ERROR : should be no errors during texture setup |
| [ 77: PASS ] getError was expected value: NO_ERROR : OES_texture_half_float texture with Linear filter should succeed with NO_ERROR if OES_texture_half_float is enabled |
| [ 78: PASS ] should be 255,255,255,255 |
| [ 79: PASS ] getError was expected value: NO_ERROR : should be no errors during texture setup |
| [ 80: PASS ] getError was expected value: NO_ERROR : OES_texture_half_float texture with Linear filter should succeed with NO_ERROR if OES_texture_half_float is enabled |
| [ 81: PASS ] should be 255,255,255,255 |
| [ 82: PASS ] getError was expected value: NO_ERROR : OES_texture_half_float texture with Linear filter should succeed with NO_ERROR if OES_texture_half_float is enabled |
| [ 83: PASS ] should be 255,255,255,255 |
| [ 84: PASS ] getError was expected value: NO_ERROR : OES_texture_half_float texture with Linear filter should succeed with NO_ERROR if OES_texture_half_float is enabled |
| [ 85: PASS ] should be 255,255,255,255 |
| [ 86: PASS ] getError was expected value: NO_ERROR : should be no errors during texture setup |
| [ 87: PASS ] getError was expected value: NO_ERROR : OES_texture_half_float texture with Linear filter should succeed with NO_ERROR if OES_texture_half_float is enabled |
| [ 88: PASS ] should be 255,255,255,255 |
| [ 89: PASS ] getError was expected value: NO_ERROR : should be no errors during texture setup |
| [ 90: PASS ] getError was expected value: NO_ERROR : OES_texture_half_float texture with Linear filter should succeed with NO_ERROR if OES_texture_half_float is enabled |
| [ 91: PASS ] should be 255,255,255,255 |
| [ 92: PASS ] getError was expected value: NO_ERROR : should be no errors during texture setup |
| [ 93: PASS ] getError was expected value: NO_ERROR : OES_texture_half_float texture with Linear filter should succeed with NO_ERROR if OES_texture_half_float is enabled |
| [ 94: PASS ] should be 255,255,255,255 |
| [ 95: PASS ] getError was expected value: NO_ERROR : should be no errors during texture setup |
| [ 96: PASS ] getError was expected value: NO_ERROR : OES_texture_half_float texture with Linear filter should succeed with NO_ERROR if OES_texture_half_float is enabled |
| [ 97: PASS ] should be 255,255,255,255 |
| [ 98: PASS ] getError was expected value: NO_ERROR : OES_texture_half_float texture with non-Linear filter should succeed with NO_ERROR no matter whether OES_texture_half_float_linear is enabled or not |
| [ 99: PASS ] should be 255,255,255,255 |
| [ 100: PASS ] getError was expected value: NO_ERROR : OES_texture_half_float texture with Linear filter should succeed with NO_ERROR if OES_texture_half_float is enabled |
| [ 101: PASS ] should be 255,255,255,255 |
| [ 102: PASS ] getError was expected value: NO_ERROR : should be no errors during texture setup |
| [ 103: PASS ] getError was expected value: NO_ERROR : OES_texture_half_float texture with non-Linear filter should succeed with NO_ERROR no matter whether OES_texture_half_float_linear is enabled or not |
| [ 104: PASS ] should be 255,255,255,255 |
| [ 105: PASS ] getError was expected value: NO_ERROR : should be no errors during texture setup |
| [ 106: PASS ] getError was expected value: NO_ERROR : OES_texture_half_float texture with Linear filter should succeed with NO_ERROR if OES_texture_half_float is enabled |
| [ 107: PASS ] should be 255,255,255,255 |
| [ 108: PASS ] getError was expected value: NO_ERROR : should be no errors during texture setup |
| [ 109: PASS ] getError was expected value: NO_ERROR : OES_texture_half_float texture with Linear filter should succeed with NO_ERROR if OES_texture_half_float is enabled |
| [ 110: PASS ] should be 255,255,255,255 |
| [ 111: PASS ] getError was expected value: NO_ERROR : should be no errors during texture setup |
| [ 112: PASS ] getError was expected value: NO_ERROR : OES_texture_half_float texture with Linear filter should succeed with NO_ERROR if OES_texture_half_float is enabled |
| [ 113: PASS ] should be 255,255,255,255 |
| [ 114: PASS ] getError was expected value: NO_ERROR : OES_texture_half_float texture with Linear filter should succeed with NO_ERROR if OES_texture_half_float is enabled |
| [ 115: PASS ] should be 255,255,255,255 |
| [ 116: PASS ] getError was expected value: NO_ERROR : OES_texture_half_float texture with Linear filter should succeed with NO_ERROR if OES_texture_half_float is enabled |
| [ 117: PASS ] should be 255,255,255,255 |
| [ 118: PASS ] getError was expected value: NO_ERROR : should be no errors during texture setup |
| [ 119: PASS ] getError was expected value: NO_ERROR : OES_texture_half_float texture with Linear filter should succeed with NO_ERROR if OES_texture_half_float is enabled |
| [ 120: PASS ] should be 255,255,255,255 |
| [ 121: PASS ] getError was expected value: NO_ERROR : should be no errors during texture setup |
| [ 122: PASS ] getError was expected value: NO_ERROR : OES_texture_half_float texture with Linear filter should succeed with NO_ERROR if OES_texture_half_float is enabled |
| [ 123: PASS ] should be 255,255,255,255 |
| [ 124: PASS ] getError was expected value: NO_ERROR : should be no errors during texture setup |
| [ 125: PASS ] getError was expected value: NO_ERROR : OES_texture_half_float texture with Linear filter should succeed with NO_ERROR if OES_texture_half_float is enabled |
| [ 126: PASS ] should be 255,255,255,255 |
| [ 127: PASS ] getError was expected value: NO_ERROR : should be no errors during texture setup |
| [ 128: PASS ] getError was expected value: NO_ERROR : OES_texture_half_float texture with Linear filter should succeed with NO_ERROR if OES_texture_half_float is enabled |
| [ 129: PASS ] should be 255,255,255,255 |
| [ 130: PASS ] successfullyParsed is true |
| [ FAIL ] 20 failures reported |
| |