| /* |
| * Copyright (C) 2010 Google Inc. All rights reserved. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions |
| * are met: |
| * |
| * 1. Redistributions of source code must retain the above copyright |
| * notice, this list of conditions and the following disclaimer. |
| * 2. Redistributions in binary form must reproduce the above copyright |
| * notice, this list of conditions and the following disclaimer in the |
| * documentation and/or other materials provided with the distribution. |
| * 3. Neither the name of Apple Inc. ("Apple") nor the names of |
| * its contributors may be used to endorse or promote products derived |
| * from this software without specific prior written permission. |
| * |
| * THIS SOFTWARE IS PROVIDED BY APPLE AND ITS CONTRIBUTORS "AS IS" AND ANY |
| * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED |
| * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE |
| * DISCLAIMED. IN NO EVENT SHALL APPLE OR ITS CONTRIBUTORS BE LIABLE FOR ANY |
| * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES |
| * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; |
| * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND |
| * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT |
| * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF |
| * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| */ |
| |
| #include "config.h" |
| |
| #if ENABLE(WEB_AUDIO) |
| |
| #include "AudioBus.h" |
| |
| #include "DenormalDisabler.h" |
| |
| #include "SincResampler.h" |
| #include "VectorMath.h" |
| #include <algorithm> |
| #include <assert.h> |
| #include <math.h> |
| |
| namespace WebCore { |
| |
| using namespace VectorMath; |
| |
| const unsigned MaxBusChannels = 32; |
| |
| RefPtr<AudioBus> AudioBus::create(unsigned numberOfChannels, size_t length, bool allocate) |
| { |
| ASSERT(numberOfChannels <= MaxBusChannels); |
| if (numberOfChannels > MaxBusChannels) |
| return nullptr; |
| |
| return adoptRef(*new AudioBus(numberOfChannels, length, allocate)); |
| } |
| |
| AudioBus::AudioBus(unsigned numberOfChannels, size_t length, bool allocate) |
| : m_length(length) |
| , m_busGain(1) |
| , m_isFirstTime(true) |
| , m_sampleRate(0) |
| { |
| m_channels.reserveInitialCapacity(numberOfChannels); |
| |
| for (unsigned i = 0; i < numberOfChannels; ++i) { |
| auto channel = allocate ? makeUnique<AudioChannel>(length) : makeUnique<AudioChannel>(nullptr, length); |
| m_channels.uncheckedAppend(WTFMove(channel)); |
| } |
| |
| m_layout = LayoutCanonical; // for now this is the only layout we define |
| } |
| |
| void AudioBus::setChannelMemory(unsigned channelIndex, float* storage, size_t length) |
| { |
| if (channelIndex < m_channels.size()) { |
| channel(channelIndex)->set(storage, length); |
| m_length = length; // FIXME: verify that this length matches all the other channel lengths |
| } |
| } |
| |
| void AudioBus::resizeSmaller(size_t newLength) |
| { |
| ASSERT(newLength <= m_length); |
| if (newLength <= m_length) |
| m_length = newLength; |
| |
| for (unsigned i = 0; i < m_channels.size(); ++i) |
| m_channels[i]->resizeSmaller(newLength); |
| } |
| |
| void AudioBus::zero() |
| { |
| for (unsigned i = 0; i < m_channels.size(); ++i) |
| m_channels[i]->zero(); |
| } |
| |
| AudioChannel* AudioBus::channelByType(unsigned channelType) |
| { |
| // For now we only support canonical channel layouts... |
| if (m_layout != LayoutCanonical) |
| return 0; |
| |
| switch (numberOfChannels()) { |
| case 1: // mono |
| if (channelType == ChannelMono || channelType == ChannelLeft) |
| return channel(0); |
| return 0; |
| |
| case 2: // stereo |
| switch (channelType) { |
| case ChannelLeft: return channel(0); |
| case ChannelRight: return channel(1); |
| default: return 0; |
| } |
| |
| case 4: // quad |
| switch (channelType) { |
| case ChannelLeft: return channel(0); |
| case ChannelRight: return channel(1); |
| case ChannelSurroundLeft: return channel(2); |
| case ChannelSurroundRight: return channel(3); |
| default: return 0; |
| } |
| |
| case 5: // 5.0 |
| switch (channelType) { |
| case ChannelLeft: return channel(0); |
| case ChannelRight: return channel(1); |
| case ChannelCenter: return channel(2); |
| case ChannelSurroundLeft: return channel(3); |
| case ChannelSurroundRight: return channel(4); |
| default: return 0; |
| } |
| |
| case 6: // 5.1 |
| switch (channelType) { |
| case ChannelLeft: return channel(0); |
| case ChannelRight: return channel(1); |
| case ChannelCenter: return channel(2); |
| case ChannelLFE: return channel(3); |
| case ChannelSurroundLeft: return channel(4); |
| case ChannelSurroundRight: return channel(5); |
| default: return 0; |
| } |
| } |
| |
| ASSERT_NOT_REACHED(); |
| return 0; |
| } |
| |
| const AudioChannel* AudioBus::channelByType(unsigned type) const |
| { |
| return const_cast<AudioBus*>(this)->channelByType(type); |
| } |
| |
| // Returns true if the channel count and frame-size match. |
| bool AudioBus::topologyMatches(const AudioBus& bus) const |
| { |
| if (numberOfChannels() != bus.numberOfChannels()) |
| return false; // channel mismatch |
| |
| // Make sure source bus has enough frames. |
| if (length() > bus.length()) |
| return false; // frame-size mismatch |
| |
| return true; |
| } |
| |
| RefPtr<AudioBus> AudioBus::createBufferFromRange(const AudioBus* sourceBuffer, unsigned startFrame, unsigned endFrame) |
| { |
| size_t numberOfSourceFrames = sourceBuffer->length(); |
| unsigned numberOfChannels = sourceBuffer->numberOfChannels(); |
| |
| // Sanity checking |
| bool isRangeSafe = startFrame < endFrame && endFrame <= numberOfSourceFrames; |
| ASSERT(isRangeSafe); |
| if (!isRangeSafe) |
| return nullptr; |
| |
| size_t rangeLength = endFrame - startFrame; |
| |
| RefPtr<AudioBus> audioBus = create(numberOfChannels, rangeLength); |
| audioBus->setSampleRate(sourceBuffer->sampleRate()); |
| |
| for (unsigned i = 0; i < numberOfChannels; ++i) |
| audioBus->channel(i)->copyFromRange(sourceBuffer->channel(i), startFrame, endFrame); |
| |
| return audioBus; |
| } |
| |
| float AudioBus::maxAbsValue() const |
| { |
| float max = 0.0f; |
| for (unsigned i = 0; i < numberOfChannels(); ++i) { |
| const AudioChannel* channel = this->channel(i); |
| max = std::max(max, channel->maxAbsValue()); |
| } |
| |
| return max; |
| } |
| |
| void AudioBus::normalize() |
| { |
| float max = maxAbsValue(); |
| if (max) |
| scale(1.0f / max); |
| } |
| |
| void AudioBus::scale(float scale) |
| { |
| for (unsigned i = 0; i < numberOfChannels(); ++i) |
| channel(i)->scale(scale); |
| } |
| |
| void AudioBus::copyFromRange(const AudioBus& sourceBus, unsigned startFrame, unsigned endFrame) |
| { |
| if (!topologyMatches(sourceBus)) { |
| ASSERT_NOT_REACHED(); |
| zero(); |
| return; |
| } |
| |
| size_t numberOfSourceFrames = sourceBus.length(); |
| bool isRangeSafe = startFrame < endFrame && endFrame <= numberOfSourceFrames; |
| ASSERT(isRangeSafe); |
| if (!isRangeSafe) { |
| zero(); |
| return; |
| } |
| |
| unsigned numberOfChannels = this->numberOfChannels(); |
| ASSERT(numberOfChannels <= MaxBusChannels); |
| if (numberOfChannels > MaxBusChannels) { |
| zero(); |
| return; |
| } |
| |
| for (unsigned i = 0; i < numberOfChannels; ++i) |
| channel(i)->copyFromRange(sourceBus.channel(i), startFrame, endFrame); |
| } |
| |
| void AudioBus::copyFrom(const AudioBus& sourceBus, ChannelInterpretation channelInterpretation) |
| { |
| if (&sourceBus == this) |
| return; |
| |
| unsigned numberOfSourceChannels = sourceBus.numberOfChannels(); |
| unsigned numberOfDestinationChannels = numberOfChannels(); |
| |
| if (numberOfDestinationChannels == numberOfSourceChannels) { |
| for (unsigned i = 0; i < numberOfSourceChannels; ++i) |
| channel(i)->copyFrom(sourceBus.channel(i)); |
| } else { |
| switch (channelInterpretation) { |
| case Speakers: |
| speakersCopyFrom(sourceBus); |
| break; |
| case Discrete: |
| discreteCopyFrom(sourceBus); |
| break; |
| default: |
| ASSERT_NOT_REACHED(); |
| } |
| } |
| } |
| |
| void AudioBus::sumFrom(const AudioBus& sourceBus, ChannelInterpretation channelInterpretation) |
| { |
| if (&sourceBus == this) |
| return; |
| |
| unsigned numberOfSourceChannels = sourceBus.numberOfChannels(); |
| unsigned numberOfDestinationChannels = numberOfChannels(); |
| |
| if (numberOfDestinationChannels == numberOfSourceChannels) { |
| for (unsigned i = 0; i < numberOfSourceChannels; ++i) |
| channel(i)->sumFrom(sourceBus.channel(i)); |
| } else { |
| switch (channelInterpretation) { |
| case Speakers: |
| speakersSumFrom(sourceBus); |
| break; |
| case Discrete: |
| discreteSumFrom(sourceBus); |
| break; |
| default: |
| ASSERT_NOT_REACHED(); |
| } |
| } |
| } |
| |
| void AudioBus::speakersCopyFrom(const AudioBus& sourceBus) |
| { |
| // FIXME: Implement down mixing 5.1 to stereo. |
| // https://bugs.webkit.org/show_bug.cgi?id=79192 |
| |
| unsigned numberOfSourceChannels = sourceBus.numberOfChannels(); |
| unsigned numberOfDestinationChannels = numberOfChannels(); |
| |
| if (numberOfDestinationChannels == 2 && numberOfSourceChannels == 1) { |
| // Handle mono -> stereo case (for now simply copy mono channel into both left and right) |
| // FIXME: Really we should apply an equal-power scaling factor here, since we're effectively panning center... |
| const AudioChannel* sourceChannel = sourceBus.channel(0); |
| channel(0)->copyFrom(sourceChannel); |
| channel(1)->copyFrom(sourceChannel); |
| } else if (numberOfDestinationChannels == 1 && numberOfSourceChannels == 2) { |
| // Handle stereo -> mono case. output = 0.5 * (input.L + input.R). |
| AudioBus& sourceBusSafe = const_cast<AudioBus&>(sourceBus); |
| |
| const float* sourceL = sourceBusSafe.channelByType(ChannelLeft)->data(); |
| const float* sourceR = sourceBusSafe.channelByType(ChannelRight)->data(); |
| |
| float* destination = channelByType(ChannelLeft)->mutableData(); |
| vadd(sourceL, 1, sourceR, 1, destination, 1, length()); |
| float scale = 0.5; |
| vsmul(destination, 1, &scale, destination, 1, length()); |
| } else if (numberOfDestinationChannels == 6 && numberOfSourceChannels == 1) { |
| // Handle mono -> 5.1 case, copy mono channel to center. |
| channel(2)->copyFrom(sourceBus.channel(0)); |
| channel(0)->zero(); |
| channel(1)->zero(); |
| channel(3)->zero(); |
| channel(4)->zero(); |
| channel(5)->zero(); |
| } else if (numberOfDestinationChannels == 1 && numberOfSourceChannels == 6) { |
| // Handle 5.1 -> mono case. |
| zero(); |
| speakersSumFrom5_1_ToMono(sourceBus); |
| } else { |
| // Fallback for unknown combinations. |
| discreteCopyFrom(sourceBus); |
| } |
| } |
| |
| void AudioBus::speakersSumFrom(const AudioBus& sourceBus) |
| { |
| // FIXME: Implement down mixing 5.1 to stereo. |
| // https://bugs.webkit.org/show_bug.cgi?id=79192 |
| |
| unsigned numberOfSourceChannels = sourceBus.numberOfChannels(); |
| unsigned numberOfDestinationChannels = numberOfChannels(); |
| |
| if (numberOfDestinationChannels == 2 && numberOfSourceChannels == 1) { |
| // Handle mono -> stereo case (summing mono channel into both left and right). |
| const AudioChannel* sourceChannel = sourceBus.channel(0); |
| channel(0)->sumFrom(sourceChannel); |
| channel(1)->sumFrom(sourceChannel); |
| } else if (numberOfDestinationChannels == 1 && numberOfSourceChannels == 2) { |
| // Handle stereo -> mono case. output += 0.5 * (input.L + input.R). |
| AudioBus& sourceBusSafe = const_cast<AudioBus&>(sourceBus); |
| |
| const float* sourceL = sourceBusSafe.channelByType(ChannelLeft)->data(); |
| const float* sourceR = sourceBusSafe.channelByType(ChannelRight)->data(); |
| |
| float* destination = channelByType(ChannelLeft)->mutableData(); |
| float scale = 0.5; |
| vsma(sourceL, 1, &scale, destination, 1, length()); |
| vsma(sourceR, 1, &scale, destination, 1, length()); |
| } else if (numberOfDestinationChannels == 6 && numberOfSourceChannels == 1) { |
| // Handle mono -> 5.1 case, sum mono channel into center. |
| channel(2)->sumFrom(sourceBus.channel(0)); |
| } else if (numberOfDestinationChannels == 1 && numberOfSourceChannels == 6) { |
| // Handle 5.1 -> mono case. |
| speakersSumFrom5_1_ToMono(sourceBus); |
| } else { |
| // Fallback for unknown combinations. |
| discreteSumFrom(sourceBus); |
| } |
| } |
| |
| void AudioBus::speakersSumFrom5_1_ToMono(const AudioBus& sourceBus) |
| { |
| AudioBus& sourceBusSafe = const_cast<AudioBus&>(sourceBus); |
| |
| const float* sourceL = sourceBusSafe.channelByType(ChannelLeft)->data(); |
| const float* sourceR = sourceBusSafe.channelByType(ChannelRight)->data(); |
| const float* sourceC = sourceBusSafe.channelByType(ChannelCenter)->data(); |
| const float* sourceSL = sourceBusSafe.channelByType(ChannelSurroundLeft)->data(); |
| const float* sourceSR = sourceBusSafe.channelByType(ChannelSurroundRight)->data(); |
| |
| float* destination = channelByType(ChannelLeft)->mutableData(); |
| |
| AudioFloatArray temp(length()); |
| float* tempData = temp.data(); |
| |
| // Sum in L and R. |
| vadd(sourceL, 1, sourceR, 1, tempData, 1, length()); |
| float scale = 0.7071; |
| vsmul(tempData, 1, &scale, tempData, 1, length()); |
| vadd(tempData, 1, destination, 1, destination, 1, length()); |
| |
| // Sum in SL and SR. |
| vadd(sourceSL, 1, sourceSR, 1, tempData, 1, length()); |
| scale = 0.5; |
| vsmul(tempData, 1, &scale, tempData, 1, length()); |
| vadd(tempData, 1, destination, 1, destination, 1, length()); |
| |
| // Sum in center. |
| vadd(sourceC, 1, destination, 1, destination, 1, length()); |
| } |
| |
| void AudioBus::discreteCopyFrom(const AudioBus& sourceBus) |
| { |
| unsigned numberOfSourceChannels = sourceBus.numberOfChannels(); |
| unsigned numberOfDestinationChannels = numberOfChannels(); |
| |
| if (numberOfDestinationChannels < numberOfSourceChannels) { |
| // Down-mix by copying channels and dropping the remaining. |
| for (unsigned i = 0; i < numberOfDestinationChannels; ++i) |
| channel(i)->copyFrom(sourceBus.channel(i)); |
| } else if (numberOfDestinationChannels > numberOfSourceChannels) { |
| // Up-mix by copying as many channels as we have, then zeroing remaining channels. |
| for (unsigned i = 0; i < numberOfSourceChannels; ++i) |
| channel(i)->copyFrom(sourceBus.channel(i)); |
| for (unsigned i = numberOfSourceChannels; i < numberOfDestinationChannels; ++i) |
| channel(i)->zero(); |
| } |
| } |
| |
| void AudioBus::discreteSumFrom(const AudioBus& sourceBus) |
| { |
| unsigned numberOfSourceChannels = sourceBus.numberOfChannels(); |
| unsigned numberOfDestinationChannels = numberOfChannels(); |
| |
| if (numberOfDestinationChannels < numberOfSourceChannels) { |
| // Down-mix by summing channels and dropping the remaining. |
| for (unsigned i = 0; i < numberOfDestinationChannels; ++i) |
| channel(i)->sumFrom(sourceBus.channel(i)); |
| } else if (numberOfDestinationChannels > numberOfSourceChannels) { |
| // Up-mix by summing as many channels as we have. |
| for (unsigned i = 0; i < numberOfSourceChannels; ++i) |
| channel(i)->sumFrom(sourceBus.channel(i)); |
| } |
| } |
| |
| void AudioBus::copyWithGainFrom(const AudioBus &sourceBus, float* lastMixGain, float targetGain) |
| { |
| if (!topologyMatches(sourceBus)) { |
| ASSERT_NOT_REACHED(); |
| zero(); |
| return; |
| } |
| |
| if (sourceBus.isSilent()) { |
| zero(); |
| return; |
| } |
| |
| unsigned numberOfChannels = this->numberOfChannels(); |
| ASSERT(numberOfChannels <= MaxBusChannels); |
| if (numberOfChannels > MaxBusChannels) |
| return; |
| |
| // If it is copying from the same bus and no need to change gain, just return. |
| if (this == &sourceBus && *lastMixGain == targetGain && targetGain == 1) |
| return; |
| |
| AudioBus& sourceBusSafe = const_cast<AudioBus&>(sourceBus); |
| const float* sources[MaxBusChannels]; |
| float* destinations[MaxBusChannels]; |
| |
| for (unsigned i = 0; i < numberOfChannels; ++i) { |
| sources[i] = sourceBusSafe.channel(i)->data(); |
| destinations[i] = channel(i)->mutableData(); |
| } |
| |
| // We don't want to suddenly change the gain from mixing one time slice to the next, |
| // so we "de-zipper" by slowly changing the gain each sample-frame until we've achieved the target gain. |
| |
| // Take master bus gain into account as well as the targetGain. |
| float totalDesiredGain = static_cast<float>(m_busGain * targetGain); |
| |
| // First time, snap directly to totalDesiredGain. |
| float gain = static_cast<float>(m_isFirstTime ? totalDesiredGain : *lastMixGain); |
| m_isFirstTime = false; |
| |
| const float DezipperRate = 0.005f; |
| unsigned framesToProcess = length(); |
| |
| // If the gain is within epsilon of totalDesiredGain, we can skip dezippering. |
| // FIXME: this value may need tweaking. |
| const float epsilon = 0.001f; |
| float gainDiff = fabs(totalDesiredGain - gain); |
| |
| // Number of frames to de-zipper before we are close enough to the target gain. |
| // FIXME: framesToDezipper could be smaller when target gain is close enough within this process loop. |
| unsigned framesToDezipper = (gainDiff < epsilon) ? 0 : framesToProcess; |
| |
| if (framesToDezipper) { |
| if (!m_dezipperGainValues.get() || m_dezipperGainValues->size() < framesToDezipper) |
| m_dezipperGainValues = makeUnique<AudioFloatArray>(framesToDezipper); |
| |
| float* gainValues = m_dezipperGainValues->data(); |
| for (unsigned i = 0; i < framesToDezipper; ++i) { |
| gain += (totalDesiredGain - gain) * DezipperRate; |
| |
| // FIXME: If we are clever enough in calculating the framesToDezipper value, we can probably get |
| // rid of this DenormalDisabler::flushDenormalFloatToZero() call. |
| gain = DenormalDisabler::flushDenormalFloatToZero(gain); |
| *gainValues++ = gain; |
| } |
| |
| for (unsigned channelIndex = 0; channelIndex < numberOfChannels; ++channelIndex) { |
| vmul(sources[channelIndex], 1, m_dezipperGainValues->data(), 1, destinations[channelIndex], 1, framesToDezipper); |
| sources[channelIndex] += framesToDezipper; |
| destinations[channelIndex] += framesToDezipper; |
| } |
| } else |
| gain = totalDesiredGain; |
| |
| // Apply constant gain after de-zippering has converged on target gain. |
| if (framesToDezipper < framesToProcess) { |
| // Handle gains of 0 and 1 (exactly) specially. |
| if (gain == 1) { |
| for (unsigned channelIndex = 0; channelIndex < numberOfChannels; ++channelIndex) |
| memcpy(destinations[channelIndex], sources[channelIndex], (framesToProcess - framesToDezipper) * sizeof(*destinations[channelIndex])); |
| } else if (!gain) { |
| for (unsigned channelIndex = 0; channelIndex < numberOfChannels; ++channelIndex) |
| memset(destinations[channelIndex], 0, (framesToProcess - framesToDezipper) * sizeof(*destinations[channelIndex])); |
| } else { |
| for (unsigned channelIndex = 0; channelIndex < numberOfChannels; ++channelIndex) |
| vsmul(sources[channelIndex], 1, &gain, destinations[channelIndex], 1, framesToProcess - framesToDezipper); |
| } |
| } |
| |
| // Save the target gain as the starting point for next time around. |
| *lastMixGain = gain; |
| } |
| |
| void AudioBus::copyWithSampleAccurateGainValuesFrom(const AudioBus &sourceBus, float* gainValues, unsigned numberOfGainValues) |
| { |
| // Make sure we're processing from the same type of bus. |
| // We *are* able to process from mono -> stereo |
| if (sourceBus.numberOfChannels() != 1 && !topologyMatches(sourceBus)) { |
| ASSERT_NOT_REACHED(); |
| return; |
| } |
| |
| if (!gainValues || numberOfGainValues > sourceBus.length()) { |
| ASSERT_NOT_REACHED(); |
| return; |
| } |
| |
| if (sourceBus.length() == numberOfGainValues && sourceBus.length() == length() && sourceBus.isSilent()) { |
| zero(); |
| return; |
| } |
| |
| // We handle both the 1 -> N and N -> N case here. |
| const float* source = sourceBus.channel(0)->data(); |
| for (unsigned channelIndex = 0; channelIndex < numberOfChannels(); ++channelIndex) { |
| if (sourceBus.numberOfChannels() == numberOfChannels()) |
| source = sourceBus.channel(channelIndex)->data(); |
| float* destination = channel(channelIndex)->mutableData(); |
| vmul(source, 1, gainValues, 1, destination, 1, numberOfGainValues); |
| } |
| } |
| |
| RefPtr<AudioBus> AudioBus::createBySampleRateConverting(const AudioBus* sourceBus, bool mixToMono, double newSampleRate) |
| { |
| // sourceBus's sample-rate must be known. |
| ASSERT(sourceBus && sourceBus->sampleRate()); |
| if (!sourceBus || !sourceBus->sampleRate()) |
| return nullptr; |
| |
| double sourceSampleRate = sourceBus->sampleRate(); |
| double destinationSampleRate = newSampleRate; |
| double sampleRateRatio = sourceSampleRate / destinationSampleRate; |
| unsigned numberOfSourceChannels = sourceBus->numberOfChannels(); |
| |
| if (numberOfSourceChannels == 1) |
| mixToMono = false; // already mono |
| |
| if (sourceSampleRate == destinationSampleRate) { |
| // No sample-rate conversion is necessary. |
| if (mixToMono) |
| return AudioBus::createByMixingToMono(sourceBus); |
| |
| // Return exact copy. |
| return AudioBus::createBufferFromRange(sourceBus, 0, sourceBus->length()); |
| } |
| |
| if (sourceBus->isSilent()) { |
| RefPtr<AudioBus> silentBus = create(numberOfSourceChannels, sourceBus->length() / sampleRateRatio); |
| silentBus->setSampleRate(newSampleRate); |
| return silentBus; |
| } |
| |
| // First, mix to mono (if necessary) then sample-rate convert. |
| const AudioBus* resamplerSourceBus; |
| RefPtr<AudioBus> mixedMonoBus; |
| if (mixToMono) { |
| mixedMonoBus = AudioBus::createByMixingToMono(sourceBus); |
| resamplerSourceBus = mixedMonoBus.get(); |
| } else { |
| // Directly resample without down-mixing. |
| resamplerSourceBus = sourceBus; |
| } |
| |
| // Calculate destination length based on the sample-rates. |
| int sourceLength = resamplerSourceBus->length(); |
| int destinationLength = sourceLength / sampleRateRatio; |
| |
| // Create destination bus with same number of channels. |
| unsigned numberOfDestinationChannels = resamplerSourceBus->numberOfChannels(); |
| RefPtr<AudioBus> destinationBus = create(numberOfDestinationChannels, destinationLength); |
| |
| // Sample-rate convert each channel. |
| for (unsigned i = 0; i < numberOfDestinationChannels; ++i) { |
| const float* source = resamplerSourceBus->channel(i)->data(); |
| float* destination = destinationBus->channel(i)->mutableData(); |
| |
| SincResampler resampler(sampleRateRatio); |
| resampler.process(source, destination, sourceLength); |
| } |
| |
| destinationBus->clearSilentFlag(); |
| destinationBus->setSampleRate(newSampleRate); |
| return destinationBus; |
| } |
| |
| RefPtr<AudioBus> AudioBus::createByMixingToMono(const AudioBus* sourceBus) |
| { |
| if (sourceBus->isSilent()) |
| return create(1, sourceBus->length()); |
| |
| switch (sourceBus->numberOfChannels()) { |
| case 1: |
| // Simply create an exact copy. |
| return AudioBus::createBufferFromRange(sourceBus, 0, sourceBus->length()); |
| case 2: |
| { |
| unsigned n = sourceBus->length(); |
| RefPtr<AudioBus> destinationBus = create(1, n); |
| |
| const float* sourceL = sourceBus->channel(0)->data(); |
| const float* sourceR = sourceBus->channel(1)->data(); |
| float* destination = destinationBus->channel(0)->mutableData(); |
| |
| // Do the mono mixdown. |
| for (unsigned i = 0; i < n; ++i) |
| destination[i] = (sourceL[i] + sourceR[i]) / 2; |
| |
| destinationBus->clearSilentFlag(); |
| destinationBus->setSampleRate(sourceBus->sampleRate()); |
| return destinationBus; |
| } |
| } |
| |
| ASSERT_NOT_REACHED(); |
| return nullptr; |
| } |
| |
| bool AudioBus::isSilent() const |
| { |
| for (size_t i = 0; i < m_channels.size(); ++i) { |
| if (!m_channels[i]->isSilent()) |
| return false; |
| } |
| return true; |
| } |
| |
| void AudioBus::clearSilentFlag() |
| { |
| for (size_t i = 0; i < m_channels.size(); ++i) |
| m_channels[i]->clearSilentFlag(); |
| } |
| |
| } // WebCore |
| |
| #endif // ENABLE(WEB_AUDIO) |
