Google Git
Sign in
webkit / WebKit / 62e953412d4a297da03579dbda40bd6220f8c63a / . / JavaScriptCore / pcre / pcre_compile.c
blob: 39dc73ffa14d672d95ed6394cc579dd7476b2004 [file] [log] [blame]
/*************************************************
* Perl-Compatible Regular Expressions *
*************************************************/
/* PCRE is a library of functions to support regular expressions whose syntax
and semantics are as close as possible to those of the Perl 5 language.
Written by Philip Hazel
Copyright (c) 1997-2005 University of Cambridge
Copyright (c) 2004, 2005 Apple Computer, Inc.
-----------------------------------------------------------------------------
Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions are met:
* Redistributions of source code must retain the above copyright notice,
this list of conditions and the following disclaimer.
* Redistributions in binary form must reproduce the above copyright
notice, this list of conditions and the following disclaimer in the
documentation and/or other materials provided with the distribution.
* Neither the name of the University of Cambridge nor the names of its
contributors may be used to endorse or promote products derived from
this software without specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
POSSIBILITY OF SUCH DAMAGE.
-----------------------------------------------------------------------------
*/
/* This module contains the external function pcre_compile(), along with
supporting internal functions that are not used by other modules. */
#include "pcre_internal.h"
/* WARNING: These macros evaluate their parameters more than once. */
#if PCRE_UTF16
#define CTYPES(cd, x) ((x) <= 255 ? (cd)->ctypes[(x)] : 0)
#define DIGITAB(x) ((x) <= 255 ? digitab[(x)] : 0)
#else
#define CTYPES(cd, x) cd->ctypes[(x)]
#define DIGITAB(x) digitab[(x)]
#endif
/* When DEBUG is defined, we need the pcre_printint() function, which is also
used by pcretest. DEBUG is not defined when building a production library. */
#ifdef DEBUG
#include "pcre_printint.src"
#endif
/*************************************************
* Code parameters and static tables *
*************************************************/
/* Maximum number of items on the nested bracket stacks at compile time. This
applies to the nesting of all kinds of parentheses. It does not limit
un-nested, non-capturing parentheses. This number can be made bigger if
necessary - it is used to dimension one int and one unsigned char vector at
compile time. */
#define BRASTACK_SIZE 200
/* Table for handling escaped characters in the range '0'-'z'. Positive returns
are simple data values; negative values are for special things like \d and so
on. Zero means further processing is needed (for things like \x), or the escape
is invalid. */
#if !EBCDIC /* This is the "normal" table for ASCII systems */
static const short int escapes[] = {
0, 0, 0, 0, 0, 0, 0, 0, /* 0 - 7 */
0, 0, ':', ';', '<', '=', '>', '?', /* 8 - ? */
'@', -ESC_A, -ESC_B, -ESC_C, -ESC_D, -ESC_E, 0, -ESC_G, /* @ - G */
0, 0, 0, 0, 0, 0, 0, 0, /* H - O */
-ESC_P, -ESC_Q, 0, -ESC_S, 0, 0, 0, -ESC_W, /* P - W */
-ESC_X, 0, -ESC_Z, '[', '\\', ']', '^', '_', /* X - _ */
'`', 7, -ESC_b, 0, -ESC_d, ESC_e, ESC_f, 0, /* ` - g */
0, 0, 0, 0, 0, 0, ESC_n, 0, /* h - o */
-ESC_p, 0, ESC_r, -ESC_s, ESC_tee, 0, 0, -ESC_w, /* p - w */
0, 0, -ESC_z /* x - z */
};
#else /* This is the "abnormal" table for EBCDIC systems */
static const short int escapes[] = {
/* 48 */ 0, 0, 0, '.', '<', '(', '+', '|',
/* 50 */ '&', 0, 0, 0, 0, 0, 0, 0,
/* 58 */ 0, 0, '!', '$', '*', ')', ';', '~',
/* 60 */ '-', '/', 0, 0, 0, 0, 0, 0,
/* 68 */ 0, 0, '|', ',', '%', '_', '>', '?',
/* 70 */ 0, 0, 0, 0, 0, 0, 0, 0,
/* 78 */ 0, '`', ':', '#', '@', '\'', '=', '"',
/* 80 */ 0, 7, -ESC_b, 0, -ESC_d, ESC_e, ESC_f, 0,
/* 88 */ 0, 0, 0, '{', 0, 0, 0, 0,
/* 90 */ 0, 0, 0, 'l', 0, ESC_n, 0, -ESC_p,
/* 98 */ 0, ESC_r, 0, '}', 0, 0, 0, 0,
/* A0 */ 0, '~', -ESC_s, ESC_tee, 0, 0, -ESC_w, 0,
/* A8 */ 0,-ESC_z, 0, 0, 0, '[', 0, 0,
/* B0 */ 0, 0, 0, 0, 0, 0, 0, 0,
/* B8 */ 0, 0, 0, 0, 0, ']', '=', '-',
/* C0 */ '{',-ESC_A, -ESC_B, -ESC_C, -ESC_D,-ESC_E, 0, -ESC_G,
/* C8 */ 0, 0, 0, 0, 0, 0, 0, 0,
/* D0 */ '}', 0, 0, 0, 0, 0, 0, -ESC_P,
/* D8 */-ESC_Q, 0, 0, 0, 0, 0, 0, 0,
/* E0 */ '\\', 0, -ESC_S, 0, 0, 0, -ESC_W, -ESC_X,
/* E8 */ 0,-ESC_Z, 0, 0, 0, 0, 0, 0,
/* F0 */ 0, 0, 0, 0, 0, 0, 0, 0,
/* F8 */ 0, 0, 0, 0, 0, 0, 0, 0
};
#endif
/* Tables of names of POSIX character classes and their lengths. The list is
terminated by a zero length entry. The first three must be alpha, upper, lower,
as this is assumed for handling case independence. */
static const char * const posix_names[] = {
"alpha", "lower", "upper",
"alnum", "ascii", "blank", "cntrl", "digit", "graph",
"print", "punct", "space", "word", "xdigit" };
static const uschar posix_name_lengths[] = {
5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 4, 6, 0 };
/* Table of class bit maps for each POSIX class; up to three may be combined
to form the class. The table for [:blank:] is dynamically modified to remove
the vertical space characters. */
static const int posix_class_maps[] = {
cbit_lower, cbit_upper, -1, /* alpha */
cbit_lower, -1, -1, /* lower */
cbit_upper, -1, -1, /* upper */
cbit_digit, cbit_lower, cbit_upper, /* alnum */
cbit_print, cbit_cntrl, -1, /* ascii */
cbit_space, -1, -1, /* blank - a GNU extension */
cbit_cntrl, -1, -1, /* cntrl */
cbit_digit, -1, -1, /* digit */
cbit_graph, -1, -1, /* graph */
cbit_print, -1, -1, /* print */
cbit_punct, -1, -1, /* punct */
cbit_space, -1, -1, /* space */
cbit_word, -1, -1, /* word - a Perl extension */
cbit_xdigit,-1, -1 /* xdigit */
};
/* The texts of compile-time error messages. These are "char *" because they
are passed to the outside world. */
static const char * const error_texts[] = {
"no error",
"\\ at end of pattern",
"\\c at end of pattern",
"unrecognized character follows \\",
"numbers out of order in {} quantifier",
/* 5 */
"number too big in {} quantifier",
"missing terminating ] for character class",
"invalid escape sequence in character class",
"range out of order in character class",
"nothing to repeat",
/* 10 */
"operand of unlimited repeat could match the empty string",
"internal error: unexpected repeat",
"unrecognized character after (?",
"POSIX named classes are supported only within a class",
"missing )",
/* 15 */
"reference to non-existent subpattern",
"erroffset passed as NULL",
"unknown option bit(s) set",
"missing ) after comment",
"parentheses nested too deeply",
/* 20 */
"regular expression too large",
"failed to get memory",
"unmatched parentheses",
"internal error: code overflow",
"unrecognized character after (?<",
/* 25 */
"lookbehind assertion is not fixed length",
"malformed number after (?(",
"conditional group contains more than two branches",
"assertion expected after (?(",
"(?R or (?digits must be followed by )",
/* 30 */
"unknown POSIX class name",
"POSIX collating elements are not supported",
"this version of PCRE is not compiled with PCRE_UTF8 support",
"spare error",
"character value in \\x{...} sequence is too large",
/* 35 */
"invalid condition (?(0)",
"\\C not allowed in lookbehind assertion",
"PCRE does not support \\L, \\l, \\N, \\U, or \\u",
"number after (?C is > 255",
"closing ) for (?C expected",
/* 40 */
"recursive call could loop indefinitely",
"unrecognized character after (?P",
"syntax error after (?P",
"two named groups have the same name",
#if PCRE_UTF16
"invalid UTF-16 string",
#else
"invalid UTF-8 string",
#endif
/* 45 */
"support for \\P, \\p, and \\X has not been compiled",
"malformed \\P or \\p sequence",
"unknown property name after \\P or \\p"
};
/* Table to identify digits and hex digits. This is used when compiling
patterns. Note that the tables in chartables are dependent on the locale, and
may mark arbitrary characters as digits - but the PCRE compiling code expects
to handle only 0-9, a-z, and A-Z as digits when compiling. That is why we have
a private table here. It costs 256 bytes, but it is a lot faster than doing
character value tests (at least in some simple cases I timed), and in some
applications one wants PCRE to compile efficiently as well as match
efficiently.
For convenience, we use the same bit definitions as in chartables:
0x04 decimal digit
0x08 hexadecimal digit
Then we can use ctype_digit and ctype_xdigit in the code. */
#if !EBCDIC /* This is the "normal" case, for ASCII systems */
static const unsigned char digitab[] =
{
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 0- 7 */
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 8- 15 */
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 16- 23 */
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 24- 31 */
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* - ' */
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* ( - / */
0x0c,0x0c,0x0c,0x0c,0x0c,0x0c,0x0c,0x0c, /* 0 - 7 */
0x0c,0x0c,0x00,0x00,0x00,0x00,0x00,0x00, /* 8 - ? */
0x00,0x08,0x08,0x08,0x08,0x08,0x08,0x00, /* @ - G */
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* H - O */
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* P - W */
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* X - _ */
0x00,0x08,0x08,0x08,0x08,0x08,0x08,0x00, /* ` - g */
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* h - o */
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* p - w */
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* x -127 */
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 128-135 */
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 136-143 */
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 144-151 */
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 152-159 */
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 160-167 */
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 168-175 */
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 176-183 */
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 184-191 */
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 192-199 */
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 200-207 */
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 208-215 */
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 216-223 */
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 224-231 */
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 232-239 */
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 240-247 */
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00};/* 248-255 */
#else /* This is the "abnormal" case, for EBCDIC systems */
static const unsigned char digitab[] =
{
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 0- 7 0 */
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 8- 15 */
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 16- 23 10 */
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 24- 31 */
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 32- 39 20 */
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 40- 47 */
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 48- 55 30 */
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 56- 63 */
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* - 71 40 */
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 72- | */
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* & - 87 50 */
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 88- 0xAC */
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* - -103 60 */
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 104- ? */
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 112-119 70 */
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 120- " */
0x00,0x08,0x08,0x08,0x08,0x08,0x08,0x00, /* 128- g 80 */
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* h -143 */
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 144- p 90 */
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* q -159 */
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 160- x A0 */
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* y -175 */
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* ^ -183 B0 */
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 184-191 */
0x00,0x08,0x08,0x08,0x08,0x08,0x08,0x00, /* { - G C0 */
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* H -207 */
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* } - P D0 */
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* Q -223 */
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* \ - X E0 */
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* Y -239 */
0x0c,0x0c,0x0c,0x0c,0x0c,0x0c,0x0c,0x0c, /* 0 - 7 F0 */
0x0c,0x0c,0x00,0x00,0x00,0x00,0x00,0x00};/* 8 -255 */
static const unsigned char ebcdic_chartab[] = { /* chartable partial dup */
0x80,0x00,0x00,0x00,0x00,0x01,0x00,0x00, /* 0- 7 */
0x00,0x00,0x00,0x00,0x01,0x01,0x00,0x00, /* 8- 15 */
0x00,0x00,0x00,0x00,0x00,0x01,0x00,0x00, /* 16- 23 */
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 24- 31 */
0x00,0x00,0x00,0x00,0x00,0x01,0x00,0x00, /* 32- 39 */
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 40- 47 */
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 48- 55 */
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 56- 63 */
0x01,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* - 71 */
0x00,0x00,0x00,0x80,0x00,0x80,0x80,0x80, /* 72- | */
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* & - 87 */
0x00,0x00,0x00,0x80,0x80,0x80,0x00,0x00, /* 88- ¬ */
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* - -103 */
0x00,0x00,0x00,0x00,0x00,0x10,0x00,0x80, /* 104- ? */
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 112-119 */
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 120- " */
0x00,0x1a,0x1a,0x1a,0x1a,0x1a,0x1a,0x12, /* 128- g */
0x12,0x12,0x00,0x00,0x00,0x00,0x00,0x00, /* h -143 */
0x00,0x12,0x12,0x12,0x12,0x12,0x12,0x12, /* 144- p */
0x12,0x12,0x00,0x00,0x00,0x00,0x00,0x00, /* q -159 */
0x00,0x00,0x12,0x12,0x12,0x12,0x12,0x12, /* 160- x */
0x12,0x12,0x00,0x00,0x00,0x00,0x00,0x00, /* y -175 */
0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* ^ -183 */
0x00,0x00,0x80,0x00,0x00,0x00,0x00,0x00, /* 184-191 */
0x80,0x1a,0x1a,0x1a,0x1a,0x1a,0x1a,0x12, /* { - G */
0x12,0x12,0x00,0x00,0x00,0x00,0x00,0x00, /* H -207 */
0x00,0x12,0x12,0x12,0x12,0x12,0x12,0x12, /* } - P */
0x12,0x12,0x00,0x00,0x00,0x00,0x00,0x00, /* Q -223 */
0x00,0x00,0x12,0x12,0x12,0x12,0x12,0x12, /* \ - X */
0x12,0x12,0x00,0x00,0x00,0x00,0x00,0x00, /* Y -239 */
0x1c,0x1c,0x1c,0x1c,0x1c,0x1c,0x1c,0x1c, /* 0 - 7 */
0x1c,0x1c,0x00,0x00,0x00,0x00,0x00,0x00};/* 8 -255 */
#endif
/* Definition to allow mutual recursion */
static BOOL
compile_regex(int, int, int *, uschar **, const pcre_uchar **, const pcre_uchar *, int *, BOOL, int,
int *, int *, branch_chain *, compile_data *);
/*************************************************
* Handle escapes *
*************************************************/
/* This function is called when a \ has been encountered. It either returns a
positive value for a simple escape such as \n, or a negative value which
encodes one of the more complicated things such as \d. When UTF-8 is enabled,
a positive value greater than 255 may be returned. On entry, ptr is pointing at
the \. On exit, it is on the final character of the escape sequence.
Arguments:
ptrptr points to the pattern position pointer
errorcodeptr points to the errorcode variable
bracount number of previous extracting brackets
options the options bits
isclass TRUE if inside a character class
Returns: zero or positive => a data character
negative => a special escape sequence
on error, errorptr is set
*/
static int
check_escape(const pcre_uchar **ptrptr, const pcre_uchar *patternEnd, int *errorcodeptr, int bracount,
int options, BOOL isclass)
{
const pcre_uchar *ptr = *ptrptr;
int c, i;
/* If backslash is at the end of the pattern, it's an error. */
if (++ptr == patternEnd) {
*errorcodeptr = ERR1;
*ptrptr = ptr;
return 0;
}
c = *ptr;
/* Non-alphamerics are literals. For digits or letters, do an initial lookup in
a table. A non-zero result is something that can be returned immediately.
Otherwise further processing may be required. */
#if !EBCDIC /* ASCII coding */
if (c < '0' || c > 'z') {} /* Not alphameric */
else if ((i = escapes[c - '0']) != 0) c = i;
#else /* EBCDIC coding */
if (c < 'a' || (ebcdic_chartab[c] & 0x0E) == 0) {} /* Not alphameric */
else if ((i = escapes[c - 0x48]) != 0) c = i;
#endif
/* Escapes that need further processing, or are illegal. */
else
{
const pcre_uchar *oldptr;
switch (c)
{
/* A number of Perl escapes are not handled by PCRE. We give an explicit
error. */
case 'l':
case 'L':
case 'N':
case 'u':
case 'U':
*errorcodeptr = ERR37;
break;
/* The handling of escape sequences consisting of a string of digits
starting with one that is not zero is not straightforward. By experiment,
the way Perl works seems to be as follows:
Outside a character class, the digits are read as a decimal number. If the
number is less than 10, or if there are that many previous extracting
left brackets, then it is a back reference. Otherwise, up to three octal
digits are read to form an escaped byte. Thus \123 is likely to be octal
123 (cf \0123, which is octal 012 followed by the literal 3). If the octal
value is greater than 377, the least significant 8 bits are taken. Inside a
character class, \ followed by a digit is always an octal number. */
case '1': case '2': case '3': case '4': case '5':
case '6': case '7': case '8': case '9':
if (!isclass)
{
oldptr = ptr;
c -= '0';
while (ptr + 1 < patternEnd && (DIGITAB(ptr[1]) & ctype_digit) != 0)
c = c * 10 + *(++ptr) - '0';
if (c < 10 || c <= bracount)
{
c = -(ESC_REF + c);
break;
}
ptr = oldptr; /* Put the pointer back and fall through */
}
/* Handle an octal number following \. If the first digit is 8 or 9, Perl
generates a binary zero byte and treats the digit as a following literal.
Thus we have to pull back the pointer by one. */
if ((c = *ptr) >= '8')
{
ptr--;
c = 0;
break;
}
/* \0 always starts an octal number, but we may drop through to here with a
larger first octal digit. */
case '0':
c -= '0';
while (i++ < 2 && ptr + 1 < patternEnd && ptr[1] >= '0' && ptr[1] <= '7')
c = c * 8 + *(++ptr) - '0';
c &= 255; /* Take least significant 8 bits */
break;
/* \x is complicated when UTF-8 is enabled. \x{ddd} is a character number
which can be greater than 0xff, but only if the ddd are hex digits. */
case 'x':
#ifdef SUPPORT_UTF8
if (ptr + 1 < patternEnd && ptr[1] == '{' && (options & PCRE_UTF8) != 0)
{
const pcre_uchar *pt = ptr + 2;
register int count = 0;
c = 0;
while (pt < patternEnd && (DIGITAB(*pt) & ctype_xdigit) != 0)
{
int cc = *pt++;
count++;
#if !EBCDIC /* ASCII coding */
if (cc >= 'a') cc -= 32; /* Convert to upper case */
c = c * 16 + cc - ((cc < 'A')? '0' : ('A' - 10));
#else /* EBCDIC coding */
if (cc >= 'a' && cc <= 'z') cc += 64; /* Convert to upper case */
c = c * 16 + cc - ((cc >= '0')? '0' : ('A' - 10));
#endif
}
if (pt < patternEnd && *pt == '}')
{
if (c < 0 || count > 8 || (c >= 0xd800 && c <= 0xdbff) || (c >= 0xfdd0 && c <= 0xfdef) || c == 0xfffe || c == 0xffff || c > 0x10FFFF) *errorcodeptr = ERR34;
ptr = pt;
break;
}
/* If the sequence of hex digits does not end with '}', then we don't
recognize this construct; fall through to the normal \x handling. */
}
#endif
/* Read just a single hex char */
c = 0;
while (i++ < 2 && ptr + 1 < patternEnd && (DIGITAB(ptr[1]) & ctype_xdigit) != 0)
{
int cc; /* Some compilers don't like ++ */
cc = *(++ptr); /* in initializers */
#if !EBCDIC /* ASCII coding */
if (cc >= 'a') cc -= 32; /* Convert to upper case */
c = c * 16 + cc - ((cc < 'A')? '0' : ('A' - 10));
#else /* EBCDIC coding */
if (cc <= 'z') cc += 64; /* Convert to upper case */
c = c * 16 + cc - ((cc >= '0')? '0' : ('A' - 10));
#endif
}
break;
/* Other special escapes not starting with a digit are straightforward */
case 'c':
if (++ptr == patternEnd)
{
*errorcodeptr = ERR2;
return 0;
}
c = *ptr;
/* A letter is upper-cased; then the 0x40 bit is flipped. This coding
is ASCII-specific, but then the whole concept of \cx is ASCII-specific.
(However, an EBCDIC equivalent has now been added.) */
#if !EBCDIC /* ASCII coding */
if (c >= 'a' && c <= 'z') c -= 32;
c ^= 0x40;
#else /* EBCDIC coding */
if (c >= 'a' && c <= 'z') c += 64;
c ^= 0xC0;
#endif
break;
/* PCRE_EXTRA enables extensions to Perl in the matter of escapes. Any
other alphameric following \ is an error if PCRE_EXTRA was set; otherwise,
for Perl compatibility, it is a literal. This code looks a bit odd, but
there used to be some cases other than the default, and there may be again
in future, so I haven't "optimized" it. */
default:
if ((options & PCRE_EXTRA) != 0) switch(c)
{
default:
*errorcodeptr = ERR3;
break;
}
break;
}
}
*ptrptr = ptr;
return c;
}
#ifdef SUPPORT_UCP
/*************************************************
* Handle \P and \p *
*************************************************/
/* This function is called after \P or \p has been encountered, provided that
PCRE is compiled with support for Unicode properties. On entry, ptrptr is
pointing at the P or p. On exit, it is pointing at the final character of the
escape sequence.
Argument:
ptrptr points to the pattern position pointer
negptr points to a boolean that is set TRUE for negation else FALSE
errorcodeptr points to the error code variable
Returns: value from ucp_type_table, or -1 for an invalid type
*/
static int
get_ucp(const pcre_uchar **ptrptr, const pcre_uchar *patternEnd, BOOL *negptr, int *errorcodeptr)
{
int c, i, bot, top;
const pcre_uchar *ptr = *ptrptr;
char name[4];
if (++ptr == patternEnd) goto ERROR_RETURN;
c = *ptr;
*negptr = FALSE;
/* \P or \p can be followed by a one- or two-character name in {}, optionally
preceded by ^ for negation. */
if (c == '{')
{
if (ptr + 1 < patternEnd && ptr[1] == '^')
{
*negptr = TRUE;
ptr++;
}
for (i = 0; i <= 2; i++)
{
if (++ptr == patternEnd) goto ERROR_RETURN;
c = *ptr;
if (c == '}') break;
if (c > 127) goto ERROR_RETURN;
name[i] = c;
}
if (c !='}') /* Try to distinguish error cases */
{
while (++ptr < patternEnd && *ptr != '}')
;
if (*ptr == '}') goto UNKNOWN_RETURN; else goto ERROR_RETURN;
}
name[i] = 0;
}
/* Otherwise there is just one following character */
else
{
if (c > 127) goto ERROR_RETURN;
name[0] = c;
name[1] = 0;
}
*ptrptr = ptr;
/* Search for a recognized property name using binary chop */
bot = 0;
top = _pcre_utt_size;
while (bot < top)
{
i = (bot + top)/2;
c = strcmp(name, _pcre_utt[i].name);
if (c == 0) return _pcre_utt[i].value;
if (c > 0) bot = i + 1; else top = i;
}
UNKNOWN_RETURN:
*errorcodeptr = ERR47;
*ptrptr = ptr;
return -1;
ERROR_RETURN:
*errorcodeptr = ERR46;
*ptrptr = ptr;
return -1;
}
#endif
/*************************************************
* Check for counted repeat *
*************************************************/
/* This function is called when a '{' is encountered in a place where it might
start a quantifier. It looks ahead to see if it really is a quantifier or not.
It is only a quantifier if it is one of the forms {ddd} {ddd,} or {ddd,ddd}
where the ddds are digits.
Arguments:
p pointer to the first char after '{'
Returns: TRUE or FALSE
*/
static BOOL
is_counted_repeat(const pcre_uchar *p, const pcre_uchar *patternEnd)
{
if (p >= patternEnd || (DIGITAB(*p) & ctype_digit) == 0)
return FALSE;
p++;
while (p < patternEnd && (DIGITAB(*p) & ctype_digit) != 0)
p++;
if (p < patternEnd && *p == '}')
return TRUE;
if (p >= patternEnd || *p++ != ',')
return FALSE;
if (p < patternEnd && *p == '}')
return TRUE;
if (p >= patternEnd || (DIGITAB(*p) & ctype_digit) == 0)
return FALSE;
p++;
while (p < patternEnd && (DIGITAB(*p) & ctype_digit) != 0)
p++;
return (p < patternEnd && *p == '}');
}
/*************************************************
* Read repeat counts *
*************************************************/
/* Read an item of the form {n,m} and return the values. This is called only
after is_counted_repeat() has confirmed that a repeat-count quantifier exists,
so the syntax is guaranteed to be correct, but we need to check the values.
Arguments:
p pointer to first char after '{'
minp pointer to int for min
maxp pointer to int for max
returned as -1 if no max
errorcodeptr points to error code variable
Returns: pointer to '}' on success;
current ptr on error, with errorcodeptr set non-zero
*/
static const pcre_uchar *
read_repeat_counts(const pcre_uchar *p, int *minp, int *maxp, int *errorcodeptr)
{
int min = 0;
int max = -1;
/* Read the minimum value and do a paranoid check: a negative value indicates
an integer overflow. */
while ((DIGITAB(*p) & ctype_digit) != 0) min = min * 10 + *p++ - '0';
if (min < 0 || min > 65535)
{
*errorcodeptr = ERR5;
return p;
}
/* Read the maximum value if there is one, and again do a paranoid on its size.
Also, max must not be less than min. */
if (*p == '}') max = min; else
{
if (*(++p) != '}')
{
max = 0;
while((DIGITAB(*p) & ctype_digit) != 0) max = max * 10 + *p++ - '0';
if (max < 0 || max > 65535)
{
*errorcodeptr = ERR5;
return p;
}
if (max < min)
{
*errorcodeptr = ERR4;
return p;
}
}
}
/* Fill in the required variables, and pass back the pointer to the terminating '}'. */
*minp = min;
*maxp = max;
return p;
}
/*************************************************
* Find first significant op code *
*************************************************/
/* This is called by several functions that scan a compiled expression looking
for a fixed first character, or an anchoring op code etc. It skips over things
that do not influence this. For some calls, a change of option is important.
For some calls, it makes sense to skip negative forward and all backward
assertions, and also the \b assertion; for others it does not.
Arguments:
code pointer to the start of the group
options pointer to external options
optbit the option bit whose changing is significant, or
zero if none are
skipassert TRUE if certain assertions are to be skipped
Returns: pointer to the first significant opcode
*/
static const uschar*
first_significant_code(const uschar *code, int *options, int optbit,
BOOL skipassert)
{
for (;;)
{
switch ((int)*code)
{
case OP_OPT:
if (optbit > 0 && ((int)code[1] & optbit) != (*options & optbit))
*options = (int)code[1];
code += 2;
break;
case OP_ASSERT_NOT:
case OP_ASSERTBACK:
case OP_ASSERTBACK_NOT:
if (!skipassert) return code;
do code += GET(code, 1); while (*code == OP_ALT);
code += _pcre_OP_lengths[*code];
break;
case OP_WORD_BOUNDARY:
case OP_NOT_WORD_BOUNDARY:
if (!skipassert) return code;
/* Fall through */
case OP_CALLOUT:
case OP_CREF:
case OP_BRANUMBER:
code += _pcre_OP_lengths[*code];
break;
default:
return code;
}
}
/* Control never reaches here */
}
/*************************************************
* Find the fixed length of a pattern *
*************************************************/
/* Scan a pattern and compute the fixed length of subject that will match it,
if the length is fixed. This is needed for dealing with backward assertions.
In UTF8 mode, the result is in characters rather than bytes.
Arguments:
code points to the start of the pattern (the bracket)
options the compiling options
Returns: the fixed length, or -1 if there is no fixed length,
or -2 if \C was encountered
*/
static int
find_fixedlength(uschar *code, int options)
{
int length = -1;
register int branchlength = 0;
register uschar *cc = code + 1 + LINK_SIZE;
/* Scan along the opcodes for this branch. If we get to the end of the
branch, check the length against that of the other branches. */
for (;;)
{
int d;
register int op = *cc;
if (op >= OP_BRA) op = OP_BRA;
switch (op)
{
case OP_BRA:
case OP_ONCE:
case OP_COND:
d = find_fixedlength(cc, options);
if (d < 0) return d;
branchlength += d;
do cc += GET(cc, 1); while (*cc == OP_ALT);
cc += 1 + LINK_SIZE;
break;
/* Reached end of a branch; if it's a ket it is the end of a nested
call. If it's ALT it is an alternation in a nested call. If it is
END it's the end of the outer call. All can be handled by the same code. */
case OP_ALT:
case OP_KET:
case OP_KETRMAX:
case OP_KETRMIN:
case OP_END:
if (length < 0) length = branchlength;
else if (length != branchlength) return -1;
if (*cc != OP_ALT) return length;
cc += 1 + LINK_SIZE;
branchlength = 0;
break;
/* Skip over assertive subpatterns */
case OP_ASSERT:
case OP_ASSERT_NOT:
case OP_ASSERTBACK:
case OP_ASSERTBACK_NOT:
do cc += GET(cc, 1); while (*cc == OP_ALT);
/* Fall through */
/* Skip over things that don't match chars */
case OP_REVERSE:
case OP_BRANUMBER:
case OP_CREF:
case OP_OPT:
case OP_CALLOUT:
case OP_SOD:
case OP_SOM:
case OP_EOD:
case OP_EODN:
case OP_CIRC:
case OP_DOLL:
case OP_NOT_WORD_BOUNDARY:
case OP_WORD_BOUNDARY:
cc += _pcre_OP_lengths[*cc];
break;
/* Handle literal characters */
case OP_CHAR:
case OP_CHARNC:
branchlength++;
cc += 2;
#ifdef SUPPORT_UTF8
if ((options & PCRE_UTF8) != 0)
{
while ((*cc & 0xc0) == 0x80) cc++;
}
#endif
break;
/* Handle exact repetitions. The count is already in characters, but we
need to skip over a multibyte character in UTF8 mode. */
case OP_EXACT:
branchlength += GET2(cc,1);
cc += 4;
#ifdef SUPPORT_UTF8
if ((options & PCRE_UTF8) != 0)
{
while((*cc & 0x80) == 0x80) cc++;
}
#endif
break;
case OP_TYPEEXACT:
branchlength += GET2(cc,1);
cc += 4;
break;
/* Handle single-char matchers */
case OP_PROP:
case OP_NOTPROP:
cc++;
/* Fall through */
case OP_NOT_DIGIT:
case OP_DIGIT:
case OP_NOT_WHITESPACE:
case OP_WHITESPACE:
case OP_NOT_WORDCHAR:
case OP_WORDCHAR:
case OP_ANY:
branchlength++;
cc++;
break;
/* The single-byte matcher isn't allowed */
case OP_ANYBYTE:
return -2;
/* Check a class for variable quantification */
#ifdef SUPPORT_UTF8
case OP_XCLASS:
cc += GET(cc, 1) - 33;
/* Fall through */
#endif
case OP_CLASS:
case OP_NCLASS:
cc += 33;
switch (*cc)
{
case OP_CRSTAR:
case OP_CRMINSTAR:
case OP_CRQUERY:
case OP_CRMINQUERY:
return -1;
case OP_CRRANGE:
case OP_CRMINRANGE:
if (GET2(cc,1) != GET2(cc,3)) return -1;
branchlength += GET2(cc,1);
cc += 5;
break;
default:
branchlength++;
}
break;
/* Anything else is variable length */
default:
return -1;
}
}
/* Control never gets here */
}
/*************************************************
* Scan compiled regex for numbered bracket *
*************************************************/
/* This little function scans through a compiled pattern until it finds a
capturing bracket with the given number.
Arguments:
code points to start of expression
utf8 TRUE in UTF-8 mode
number the required bracket number
Returns: pointer to the opcode for the bracket, or NULL if not found
*/
static const uschar *
find_bracket(const uschar *code, BOOL utf8, int number)
{
#ifndef SUPPORT_UTF8
utf8 = utf8; /* Stop pedantic compilers complaining */
#endif
for (;;)
{
register int c = *code;
if (c == OP_END) return NULL;
else if (c > OP_BRA)
{
int n = c - OP_BRA;
if (n > EXTRACT_BASIC_MAX) n = GET2(code, 2+LINK_SIZE);
if (n == number) return (uschar *)code;
code += _pcre_OP_lengths[OP_BRA];
}
else
{
code += _pcre_OP_lengths[c];
#ifdef SUPPORT_UTF8
/* In UTF-8 mode, opcodes that are followed by a character may be followed
by a multi-byte character. The length in the table is a minimum, so we have
to scan along to skip the extra bytes. All opcodes are less than 128, so we
can use relatively efficient code. */
if (utf8) switch(c)
{
case OP_CHAR:
case OP_CHARNC:
case OP_EXACT:
case OP_UPTO:
case OP_MINUPTO:
case OP_STAR:
case OP_MINSTAR:
case OP_PLUS:
case OP_MINPLUS:
case OP_QUERY:
case OP_MINQUERY:
while ((*code & 0xc0) == 0x80) code++;
break;
/* XCLASS is used for classes that cannot be represented just by a bit
map. This includes negated single high-valued characters. The length in
the table is zero; the actual length is stored in the compiled code. */
case OP_XCLASS:
code += GET(code, 1) + 1;
break;
}
#endif
}
}
}
/*************************************************
* Scan compiled regex for recursion reference *
*************************************************/
/* This little function scans through a compiled pattern until it finds an
instance of OP_RECURSE.
Arguments:
code points to start of expression
utf8 TRUE in UTF-8 mode
Returns: pointer to the opcode for OP_RECURSE, or NULL if not found
*/
static const uschar *
find_recurse(const uschar *code, BOOL utf8)
{
#ifndef SUPPORT_UTF8
utf8 = utf8; /* Stop pedantic compilers complaining */
#endif
for (;;)
{
register int c = *code;
if (c == OP_END) return NULL;
else if (c == OP_RECURSE) return code;
else if (c > OP_BRA)
{
code += _pcre_OP_lengths[OP_BRA];
}
else
{
code += _pcre_OP_lengths[c];
#ifdef SUPPORT_UTF8
/* In UTF-8 mode, opcodes that are followed by a character may be followed
by a multi-byte character. The length in the table is a minimum, so we have
to scan along to skip the extra bytes. All opcodes are less than 128, so we
can use relatively efficient code. */
if (utf8) switch(c)
{
case OP_CHAR:
case OP_CHARNC:
case OP_EXACT:
case OP_UPTO:
case OP_MINUPTO:
case OP_STAR:
case OP_MINSTAR:
case OP_PLUS:
case OP_MINPLUS:
case OP_QUERY:
case OP_MINQUERY:
while ((*code & 0xc0) == 0x80) code++;
break;
/* XCLASS is used for classes that cannot be represented just by a bit
map. This includes negated single high-valued characters. The length in
the table is zero; the actual length is stored in the compiled code. */
case OP_XCLASS:
code += GET(code, 1) + 1;
break;
}
#endif
}
}
}
/*************************************************
* Scan compiled branch for non-emptiness *
*************************************************/
/* This function scans through a branch of a compiled pattern to see whether it
can match the empty string or not. It is called only from could_be_empty()
below. Note that first_significant_code() skips over assertions. If we hit an
unclosed bracket, we return "empty" - this means we've struck an inner bracket
whose current branch will already have been scanned.
Arguments:
code points to start of search
endcode points to where to stop
utf8 TRUE if in UTF8 mode
Returns: TRUE if what is matched could be empty
*/
static BOOL
could_be_empty_branch(const uschar *code, const uschar *endcode, BOOL utf8)
{
register int c;
for (code = first_significant_code(code + 1 + LINK_SIZE, NULL, 0, TRUE);
code < endcode;
code = first_significant_code(code + _pcre_OP_lengths[c], NULL, 0, TRUE))
{
const uschar *ccode;
c = *code;
if (c >= OP_BRA)
{
BOOL empty_branch;
if (GET(code, 1) == 0) return TRUE; /* Hit unclosed bracket */
/* Scan a closed bracket */
empty_branch = FALSE;
do
{
if (!empty_branch && could_be_empty_branch(code, endcode, utf8))
empty_branch = TRUE;
code += GET(code, 1);
}
while (*code == OP_ALT);
if (!empty_branch) return FALSE; /* All branches are non-empty */
code += 1 + LINK_SIZE;
c = *code;
}
else switch (c)
{
/* Check for quantifiers after a class */
#ifdef SUPPORT_UTF8
case OP_XCLASS:
ccode = code + GET(code, 1);
goto CHECK_CLASS_REPEAT;
#endif
case OP_CLASS:
case OP_NCLASS:
ccode = code + 33;
#ifdef SUPPORT_UTF8
CHECK_CLASS_REPEAT:
#endif
switch (*ccode)
{
case OP_CRSTAR: /* These could be empty; continue */
case OP_CRMINSTAR:
case OP_CRQUERY:
case OP_CRMINQUERY:
break;
default: /* Non-repeat => class must match */
case OP_CRPLUS: /* These repeats aren't empty */
case OP_CRMINPLUS:
return FALSE;
case OP_CRRANGE:
case OP_CRMINRANGE:
if (GET2(ccode, 1) > 0) return FALSE; /* Minimum > 0 */
break;
}
break;
/* Opcodes that must match a character */
case OP_PROP:
case OP_NOTPROP:
case OP_EXTUNI:
case OP_NOT_DIGIT:
case OP_DIGIT:
case OP_NOT_WHITESPACE:
case OP_WHITESPACE:
case OP_NOT_WORDCHAR:
case OP_WORDCHAR:
case OP_ANY:
case OP_ANYBYTE:
case OP_CHAR:
case OP_CHARNC:
case OP_NOT:
case OP_PLUS:
case OP_MINPLUS:
case OP_EXACT:
case OP_NOTPLUS:
case OP_NOTMINPLUS:
case OP_NOTEXACT:
case OP_TYPEPLUS:
case OP_TYPEMINPLUS:
case OP_TYPEEXACT:
return FALSE;
/* End of branch */
case OP_KET:
case OP_KETRMAX:
case OP_KETRMIN:
case OP_ALT:
return TRUE;
/* In UTF-8 mode, STAR, MINSTAR, QUERY, MINQUERY, UPTO, and MINUPTO may be
followed by a multibyte character */
#ifdef SUPPORT_UTF8
case OP_STAR:
case OP_MINSTAR:
case OP_QUERY:
case OP_MINQUERY:
case OP_UPTO:
case OP_MINUPTO:
if (utf8) while ((code[2] & 0xc0) == 0x80) code++;
break;
#endif
}
}
return TRUE;
}
/*************************************************
* Scan compiled regex for non-emptiness *
*************************************************/
/* This function is called to check for left recursive calls. We want to check
the current branch of the current pattern to see if it could match the empty
string. If it could, we must look outwards for branches at other levels,
stopping when we pass beyond the bracket which is the subject of the recursion.
Arguments:
code points to start of the recursion
endcode points to where to stop (current RECURSE item)
bcptr points to the chain of current (unclosed) branch starts
utf8 TRUE if in UTF-8 mode
Returns: TRUE if what is matched could be empty
*/
static BOOL
could_be_empty(const uschar *code, const uschar *endcode, branch_chain *bcptr,
BOOL utf8)
{
while (bcptr != NULL && bcptr->current >= code)
{
if (!could_be_empty_branch(bcptr->current, endcode, utf8)) return FALSE;
bcptr = bcptr->outer;
}
return TRUE;
}
/*************************************************
* Check for POSIX class syntax *
*************************************************/
/* This function is called when the sequence "[:" or "[." or "[=" is
encountered in a character class. It checks whether this is followed by an
optional ^ and then a sequence of letters, terminated by a matching ":]" or
".]" or "=]".
Argument:
ptr pointer to the initial [
endptr where to return the end pointer
cd pointer to compile data
Returns: TRUE or FALSE
*/
static BOOL
check_posix_syntax(const pcre_uchar *ptr, const pcre_uchar *patternEnd, const pcre_uchar **endptr, compile_data *cd)
{
int terminator; /* Don't combine these lines; the Solaris cc */
terminator = *(++ptr); /* compiler warns about "non-constant" initializer. */
if (*(++ptr) == '^') ptr++;
while (ptr < patternEnd && (CTYPES(cd, *ptr) & ctype_letter) != 0)
ptr++;
if (ptr + 1 < patternEnd && *ptr == terminator && ptr[1] == ']')
{
*endptr = ptr;
return TRUE;
}
return FALSE;
}
#if PCRE_UTF16
static __inline BOOL strequal(const pcre_uchar *str1, int len, const char *str2)
{
int i;
for (i = 0; i < len; i++)
if (str1[i] != str2[i])
return FALSE;
return TRUE;
}
#define STREQUAL(str1, len, str2) strequal((str1), (len), (str2))
#else
#define STREQUAL(str1, len, str2) (strncmp((const char *)(str1), (str2), (len)) == 0)
#endif
/*************************************************
* Check POSIX class name *
*************************************************/
/* This function is called to check the name given in a POSIX-style class entry
such as [:alnum:].
Arguments:
ptr points to the first letter
len the length of the name
Returns: a value representing the name, or -1 if unknown
*/
static int
check_posix_name(const pcre_uchar *ptr, int len)
{
register int yield = 0;
while (posix_name_lengths[yield] != 0)
{
if (len == posix_name_lengths[yield] &&
STREQUAL(ptr, len, posix_names[yield])) return yield;
yield++;
}
return -1;
}
/*************************************************
* Adjust OP_RECURSE items in repeated group *
*************************************************/
/* OP_RECURSE items contain an offset from the start of the regex to the group
that is referenced. This means that groups can be replicated for fixed
repetition simply by copying (because the recursion is allowed to refer to
earlier groups that are outside the current group). However, when a group is
optional (i.e. the minimum quantifier is zero), OP_BRAZERO is inserted before
it, after it has been compiled. This means that any OP_RECURSE items within it
that refer to the group itself or any contained groups have to have their
offsets adjusted. That is the job of this function. Before it is called, the
partially compiled regex must be temporarily terminated with OP_END.
Arguments:
group points to the start of the group
adjust the amount by which the group is to be moved
utf8 TRUE in UTF-8 mode
cd contains pointers to tables etc.
Returns: nothing
*/
static void
adjust_recurse(uschar *group, int adjust, BOOL utf8, compile_data *cd)
{
uschar *ptr = group;
while ((ptr = (uschar *)find_recurse(ptr, utf8)) != NULL)
{
int offset = GET(ptr, 1);
if (cd->start_code + offset >= group) PUT(ptr, 1, offset + adjust);
ptr += 1 + LINK_SIZE;
}
}
/*************************************************
* Insert an automatic callout point *
*************************************************/
/* This function is called when the PCRE_AUTO_CALLOUT option is set, to insert
callout points before each pattern item.
Arguments:
code current code pointer
ptr current pattern pointer
cd pointers to tables etc
Returns: new code pointer
*/
static uschar *
auto_callout(uschar *code, const pcre_uchar *ptr, compile_data *cd)
{
*code++ = OP_CALLOUT;
*code++ = 255;
PUT(code, 0, ptr - cd->start_pattern); /* Pattern offset */
PUT(code, LINK_SIZE, 0); /* Default length */
return code + 2*LINK_SIZE;
}
/*************************************************
* Complete a callout item *
*************************************************/
/* A callout item contains the length of the next item in the pattern, which
we can't fill in till after we have reached the relevant point. This is used
for both automatic and manual callouts.
Arguments:
previous_callout points to previous callout item
ptr current pattern pointer
cd pointers to tables etc
Returns: nothing
*/
static void
complete_callout(uschar *previous_callout, const pcre_uchar *ptr, compile_data *cd)
{
int length = INT_CAST(ptr - cd->start_pattern - GET(previous_callout, 2));
PUT(previous_callout, 2 + LINK_SIZE, length);
}
#ifdef SUPPORT_UCP
/*************************************************
* Get othercase range *
*************************************************/
/* This function is passed the start and end of a class range, in UTF-8 mode
with UCP support. It searches up the characters, looking for internal ranges of
characters in the "other" case. Each call returns the next one, updating the
start address.
Arguments:
cptr points to starting character value; updated
d end value
ocptr where to put start of othercase range
odptr where to put end of othercase range
Yield: TRUE when range returned; FALSE when no more
*/
static BOOL
get_othercase_range(int *cptr, int d, int *ocptr, int *odptr)
{
int c, chartype, othercase = 0, next;
for (c = *cptr; c <= d; c++)
{
if (_pcre_ucp_findchar(c, &chartype, &othercase) == ucp_L && othercase != 0)
break;
}
if (c > d) return FALSE;
*ocptr = othercase;
next = othercase + 1;
for (++c; c <= d; c++)
{
if (_pcre_ucp_findchar(c, &chartype, &othercase) != ucp_L ||
othercase != next)
break;
next++;
}
*odptr = next - 1;
*cptr = c;
return TRUE;
}
#endif /* SUPPORT_UCP */
/*************************************************
* Compile one branch *
*************************************************/
/* Scan the pattern, compiling it into the code vector. If the options are
changed during the branch, the pointer is used to change the external options
bits.
Arguments:
optionsptr pointer to the option bits
brackets points to number of extracting brackets used
codeptr points to the pointer to the current code point
ptrptr points to the current pattern pointer
errorcodeptr points to error code variable
firstbyteptr set to initial literal character, or < 0 (REQ_UNSET, REQ_NONE)
reqbyteptr set to the last literal character required, else < 0
bcptr points to current branch chain
cd contains pointers to tables etc.
Returns: TRUE on success
FALSE, with *errorcodeptr set non-zero on error
*/
static BOOL
compile_branch(int *optionsptr, int *brackets, uschar **codeptr,
const pcre_uchar **ptrptr, const pcre_uchar *patternEnd, int *errorcodeptr, int *firstbyteptr,
int *reqbyteptr, branch_chain *bcptr, compile_data *cd)
{
int repeat_type, op_type;
int repeat_min = 0, repeat_max = 0; /* To please picky compilers */
int bravalue = 0;
int greedy_default, greedy_non_default;
int firstbyte, reqbyte;
int zeroreqbyte, zerofirstbyte;
int req_caseopt, reqvary, tempreqvary;
int condcount = 0;
int options = *optionsptr;
int after_manual_callout = 0;
register int c;
register uschar *code = *codeptr;
uschar *tempcode;
BOOL inescq = FALSE;
BOOL groupsetfirstbyte = FALSE;
const pcre_uchar *ptr = *ptrptr;
const pcre_uchar *tempptr;
uschar *previous = NULL;
uschar *previous_callout = NULL;
uschar classbits[32];
#ifdef SUPPORT_UTF8
BOOL class_utf8;
BOOL utf8 = (options & PCRE_UTF8) != 0;
uschar *class_utf8data;
uschar utf8_char[6];
#else
BOOL utf8 = FALSE;
#endif
/* Set up the default and non-default settings for greediness */
greedy_default = ((options & PCRE_UNGREEDY) != 0);
greedy_non_default = greedy_default ^ 1;
/* Initialize no first byte, no required byte. REQ_UNSET means "no char
matching encountered yet". It gets changed to REQ_NONE if we hit something that
matches a non-fixed char first char; reqbyte just remains unset if we never
find one.
When we hit a repeat whose minimum is zero, we may have to adjust these values
to take the zero repeat into account. This is implemented by setting them to
zerofirstbyte and zeroreqbyte when such a repeat is encountered. The individual
item types that can be repeated set these backoff variables appropriately. */
firstbyte = reqbyte = zerofirstbyte = zeroreqbyte = REQ_UNSET;
/* The variable req_caseopt contains either the REQ_CASELESS value or zero,
according to the current setting of the caseless flag. REQ_CASELESS is a bit
value > 255. It is added into the firstbyte or reqbyte variables to record the
case status of the value. This is used only for ASCII characters. */
req_caseopt = ((options & PCRE_CASELESS) != 0)? REQ_CASELESS : 0;
/* Switch on next character until the end of the branch */
for (;; ptr++)
{
BOOL negate_class;
BOOL possessive_quantifier;
BOOL is_quantifier;
int class_charcount;
int class_lastchar;
int newoptions;
int recno;
int skipbytes;
int subreqbyte;
int subfirstbyte;
int mclength;
uschar mcbuffer[8];
/* Next byte in the pattern */
c = ptr < patternEnd ? *ptr : 0;
/* If in \Q...\E, check for the end; if not, we have a literal */
if (inescq && ptr < patternEnd)
{
if (c == '\\' && ptr + 1 < patternEnd && ptr[1] == 'E')
{
inescq = FALSE;
ptr++;
continue;
}
else
{
if (previous_callout != NULL)
{
complete_callout(previous_callout, ptr, cd);
previous_callout = NULL;
}
if ((options & PCRE_AUTO_CALLOUT) != 0)
{
previous_callout = code;
code = auto_callout(code, ptr, cd);
}
goto NORMAL_CHAR;
}
}
/* Fill in length of a previous callout, except when the next thing is
a quantifier. */
is_quantifier = c == '*' || c == '+' || c == '?' ||
(c == '{' && is_counted_repeat(ptr+1, patternEnd));
if (!is_quantifier && previous_callout != NULL &&
after_manual_callout-- <= 0)
{
complete_callout(previous_callout, ptr, cd);
previous_callout = NULL;
}
/* In extended mode, skip white space and comments */
if ((options & PCRE_EXTENDED) != 0)
{
if ((CTYPES(cd, c) & ctype_space) != 0) continue;
if (c == '#')
{
while (++ptr < patternEnd && (c = *ptr) != NEWLINE)
;
if (ptr < patternEnd)
continue; /* Else fall through to handle end of string */
c = 0;
}
}
/* No auto callout for quantifiers. */
if ((options & PCRE_AUTO_CALLOUT) != 0 && !is_quantifier)
{
previous_callout = code;
code = auto_callout(code, ptr, cd);
}
switch(c)
{
/* The branch terminates at end of string, |, or ). */
case 0:
if (ptr < patternEnd)
goto NORMAL_CHAR;
// End of string; fall through
case '|':
case ')':
*firstbyteptr = firstbyte;
*reqbyteptr = reqbyte;
*codeptr = code;
*ptrptr = ptr;
return TRUE;
/* Handle single-character metacharacters. In multiline mode, ^ disables
the setting of any following char as a first character. */
case '^':
if ((options & PCRE_MULTILINE) != 0)
{
if (firstbyte == REQ_UNSET) firstbyte = REQ_NONE;
}
previous = NULL;
*code++ = OP_CIRC;
break;
case '$':
previous = NULL;
*code++ = OP_DOLL;
break;
/* There can never be a first char if '.' is first, whatever happens about
repeats. The value of reqbyte doesn't change either. */
case '.':
if (firstbyte == REQ_UNSET) firstbyte = REQ_NONE;
zerofirstbyte = firstbyte;
zeroreqbyte = reqbyte;
previous = code;
*code++ = OP_ANY;
break;
/* Character classes. If the included characters are all < 255 in value, we
build a 32-byte bitmap of the permitted characters, except in the special
case where there is only one such character. For negated classes, we build
the map as usual, then invert it at the end. However, we use a different
opcode so that data characters > 255 can be handled correctly.
If the class contains characters outside the 0-255 range, a different
opcode is compiled. It may optionally have a bit map for characters < 256,
but those above are are explicitly listed afterwards. A flag byte tells
whether the bitmap is present, and whether this is a negated class or not.
*/
case '[':
previous = code;
/* PCRE supports POSIX class stuff inside a class. Perl gives an error if
they are encountered at the top level, so we'll do that too. */
if ((ptr[1] == ':' || ptr[1] == '.' || ptr[1] == '=') &&
check_posix_syntax(ptr, patternEnd, &tempptr, cd))
{
*errorcodeptr = (ptr[1] == ':')? ERR13 : ERR31;
goto FAILED;
}
/* If the first character is '^', set the negation flag and skip it. */
if ((c = *(++ptr)) == '^')
{
negate_class = TRUE;
c = *(++ptr);
}
else
{
negate_class = FALSE;
}
/* Keep a count of chars with values < 256 so that we can optimize the case
of just a single character (as long as it's < 256). For higher valued UTF-8
characters, we don't yet do any optimization. */
class_charcount = 0;
class_lastchar = -1;
#ifdef SUPPORT_UTF8
class_utf8 = FALSE; /* No chars >= 256 */
class_utf8data = code + LINK_SIZE + 34; /* For UTF-8 items */
#endif
/* Initialize the 32-char bit map to all zeros. We have to build the
map in a temporary bit of store, in case the class contains only 1
character (< 256), because in that case the compiled code doesn't use the
bit map. */
memset(classbits, 0, 32 * sizeof(uschar));
/* Process characters until ] is reached. By writing this as a "do" it
means that an initial ] is taken as a data character. The first pass
through the regex checked the overall syntax, so we don't need to be very
strict here. At the start of the loop, c contains the first byte of the
character. */
do
{
#ifdef SUPPORT_UTF8
if (utf8 && c > 127)
{ /* Braces are required because the */
GETCHARLEN(c, ptr, ptr); /* macro generates multiple statements */
}
#endif
/* Inside \Q...\E everything is literal except \E */
if (inescq)
{
if (c == '\\' && ptr[1] == 'E')
{
inescq = FALSE;
ptr++;
continue;
}
else goto LONE_SINGLE_CHARACTER;
}
/* Handle POSIX class names. Perl allows a negation extension of the
form [:^name:]. A square bracket that doesn't match the syntax is
treated as a literal. We also recognize the POSIX constructions
[.ch.] and [=ch=] ("collating elements") and fault them, as Perl
5.6 and 5.8 do. */
if (c == '[' &&
(ptr[1] == ':' || ptr[1] == '.' || ptr[1] == '=') &&
check_posix_syntax(ptr, patternEnd, &tempptr, cd))
{
BOOL local_negate = FALSE;
int posix_class, i, namelen;
register const uschar *cbits = cd->cbits;
if (ptr[1] != ':')
{
*errorcodeptr = ERR31;
goto FAILED;
}
ptr += 2;
if (*ptr == '^')
{
local_negate = TRUE;
ptr++;
}
namelen = INT_CAST(tempptr - ptr);
posix_class = check_posix_name(ptr, namelen);
if (posix_class < 0)
{
*errorcodeptr = ERR30;
goto FAILED;
}
/* If matching is caseless, upper and lower are converted to
alpha. This relies on the fact that the class table starts with
alpha, lower, upper as the first 3 entries. */
if ((options & PCRE_CASELESS) != 0 && posix_class <= 2)
posix_class = 0;
/* Or into the map we are building up to 3 of the static class
tables, or their negations. The [:blank:] class sets up the same
chars as the [:space:] class (all white space). We remove the vertical
white space chars afterwards. */
posix_class *= 3;
for (i = 0; i < 3; i++)
{
BOOL blankclass = ptr + 5 <= patternEnd && STREQUAL(ptr, 5, "blank");
int taboffset = posix_class_maps[posix_class + i];
if (taboffset < 0) break;
if (local_negate)
{
if (i == 0)
for (c = 0; c < 32; c++) classbits[c] |= ~cbits[c+taboffset];
else
for (c = 0; c < 32; c++) classbits[c] &= ~cbits[c+taboffset];
if (blankclass) classbits[1] |= 0x3c;
}
else
{
for (c = 0; c < 32; c++) classbits[c] |= cbits[c+taboffset];
if (blankclass) classbits[1] &= ~0x3c;
}
}
ptr = tempptr + 1;
class_charcount = 10; /* Set > 1; assumes more than 1 per class */
continue; /* End of POSIX syntax handling */
}
/* Backslash may introduce a single character, or it may introduce one
of the specials, which just set a flag. Escaped items are checked for
validity in the pre-compiling pass. The sequence \b is a special case.
Inside a class (and only there) it is treated as backspace. Elsewhere
it marks a word boundary. Other escapes have preset maps ready to
or into the one we are building. We assume they have more than one
character in them, so set class_charcount bigger than one. */
if (c == '\\')
{
c = check_escape(&ptr, patternEnd, errorcodeptr, *brackets, options, TRUE);
if (-c == ESC_b) c = '\b'; /* \b is backslash in a class */
else if (-c == ESC_X) c = 'X'; /* \X is literal X in a class */
else if (-c == ESC_Q) /* Handle start of quoted string */
{
if (ptr + 2 < patternEnd && ptr[1] == '\\' && ptr[2] == 'E')
{
ptr += 2; /* avoid empty string */
}
else inescq = TRUE;
continue;
}
if (c < 0)
{
register const uschar *cbits = cd->cbits;
class_charcount += 2; /* Greater than 1 is what matters */
switch (-c)
{
case ESC_d:
for (c = 0; c < 32; c++) classbits[c] |= cbits[c+cbit_digit];
continue;
case ESC_D:
for (c = 0; c < 32; c++) classbits[c] |= ~cbits[c+cbit_digit];
continue;
case ESC_w:
for (c = 0; c < 32; c++) classbits[c] |= cbits[c+cbit_word];
continue;
case ESC_W:
for (c = 0; c < 32; c++) classbits[c] |= ~cbits[c+cbit_word];
continue;
case ESC_s:
for (c = 0; c < 32; c++) classbits[c] |= cbits[c+cbit_space];
/* JavaScript does not omit VT, so we leave out the following line: */
/* classbits[1] &= ~0x08; Perl 5.004 onwards omits VT from \s */
continue;
case ESC_S:
for (c = 0; c < 32; c++) classbits[c] |= ~cbits[c+cbit_space];
/* JavaScript does not omit VT, so we leave out the following line: */
/* classbits[1] |= 0x08; Perl 5.004 onwards omits VT from \s */
continue;
#ifdef SUPPORT_UCP
case ESC_p:
case ESC_P:
{
BOOL negated;
int property = get_ucp(&ptr, patternEnd, &negated, errorcodeptr);
if (property < 0) goto FAILED;
class_utf8 = TRUE;
*class_utf8data++ = ((-c == ESC_p) != negated)?
XCL_PROP : XCL_NOTPROP;
*class_utf8data++ = property;
class_charcount -= 2; /* Not a < 256 character */
}
continue;
#endif
/* Unrecognized escapes are faulted if PCRE is running in its
strict mode. By default, for compatibility with Perl, they are
treated as literals. */
default:
if ((options & PCRE_EXTRA) != 0)
{
*errorcodeptr = ERR7;
goto FAILED;
}
c = *ptr; /* The final character */
class_charcount -= 2; /* Undo the default count from above */
}
}
/* Fall through if we have a single character (c >= 0). This may be
> 256 in UTF-8 mode. */
} /* End of backslash handling */
/* A single character may be followed by '-' to form a range. However,
Perl does not permit ']' to be the end of the range. A '-' character
here is treated as a literal. */
if (ptr[1] == '-' && ptr[2] != ']')
{
int d;
ptr += 2;
#ifdef SUPPORT_UTF8
if (utf8)
{ /* Braces are required because the */
GETCHARLEN(d, ptr, ptr); /* macro generates multiple statements */
}
else
#endif
d = *ptr; /* Not UTF-8 mode */
/* The second part of a range can be a single-character escape, but
not any of the other escapes. Perl 5.6 treats a hyphen as a literal
in such circumstances. */
if (d == '\\')
{
const pcre_uchar *oldptr = ptr;
d = check_escape(&ptr, patternEnd, errorcodeptr, *brackets, options, TRUE);
/* \b is backslash; \X is literal X; any other special means the '-'
was literal */
if (d < 0)
{
if (d == -ESC_b) d = '\b';
else if (d == -ESC_X) d = 'X'; else
{
ptr = oldptr - 2;
goto LONE_SINGLE_CHARACTER; /* A few lines below */
}
}
}
/* The check that the two values are in the correct order happens in
the pre-pass. Optimize one-character ranges */
if (d == c) goto LONE_SINGLE_CHARACTER; /* A few lines below */
/* In UTF-8 mode, if the upper limit is > 255, or > 127 for caseless
matching, we have to use an XCLASS with extra data items. Caseless
matching for characters > 127 is available only if UCP support is
available. */
#ifdef SUPPORT_UTF8
if (utf8 && (d > 255 || ((options & PCRE_CASELESS) != 0 && d > 127)))
{
class_utf8 = TRUE;
/* With UCP support, we can find the other case equivalents of
the relevant characters. There may be several ranges. Optimize how
they fit with the basic range. */
#ifdef SUPPORT_UCP
if ((options & PCRE_CASELESS) != 0)
{
int occ, ocd;
int cc = c;
int origd = d;
while (get_othercase_range(&cc, origd, &occ, &ocd))
{
if (occ >= c && ocd <= d) continue; /* Skip embedded ranges */
if (occ < c && ocd >= c - 1) /* Extend the basic range */
{ /* if there is overlap, */
c = occ; /* noting that if occ < c */
continue; /* we can't have ocd > d */
} /* because a subrange is */
if (ocd > d && occ <= d + 1) /* always shorter than */
{ /* the basic range. */
d = ocd;
continue;
}
if (occ == ocd)
{
*class_utf8data++ = XCL_SINGLE;
}
else
{
*class_utf8data++ = XCL_RANGE;
class_utf8data += _pcre_ord2utf8(occ, class_utf8data);
}
class_utf8data += _pcre_ord2utf8(ocd, class_utf8data);
}
}
#endif /* SUPPORT_UCP */
/* Now record the original range, possibly modified for UCP caseless
overlapping ranges. */
*class_utf8data++ = XCL_RANGE;
class_utf8data += _pcre_ord2utf8(c, class_utf8data);
class_utf8data += _pcre_ord2utf8(d, class_utf8data);
/* With UCP support, we are done. Without UCP support, there is no
caseless matching for UTF-8 characters > 127; we can use the bit map
for the smaller ones. */
#ifdef SUPPORT_UCP
continue; /* With next character in the class */
#else
if ((options & PCRE_CASELESS) == 0 || c > 127) continue;
/* Adjust upper limit and fall through to set up the map */
d = 127;
#endif /* SUPPORT_UCP */
}
#endif /* SUPPORT_UTF8 */
/* We use the bit map for all cases when not in UTF-8 mode; else
ranges that lie entirely within 0-127 when there is UCP support; else
for partial ranges without UCP support. */
for (; c <= d; c++)
{
classbits[c/8] |= (1 << (c&7));
if ((options & PCRE_CASELESS) != 0)
{
int uc = cd->fcc[c]; /* flip case */
classbits[uc/8] |= (1 << (uc&7));
}
class_charcount++; /* in case a one-char range */
class_lastchar = c;
}
continue; /* Go get the next char in the class */
}
/* Handle a lone single character - we can get here for a normal
non-escape char, or after \ that introduces a single character or for an
apparent range that isn't. */
LONE_SINGLE_CHARACTER:
/* Handle a character that cannot go in the bit map */
#ifdef SUPPORT_UTF8
if (utf8 && (c > 255 || ((options & PCRE_CASELESS) != 0 && c > 127)))
{
class_utf8 = TRUE;
*class_utf8data++ = XCL_SINGLE;
class_utf8data += _pcre_ord2utf8(c, class_utf8data);
#ifdef SUPPORT_UCP
if ((options & PCRE_CASELESS) != 0)
{
int chartype;
int othercase;
if (_pcre_ucp_findchar(c, &chartype, &othercase) == ucp_L &&
othercase > 0)
{
*class_utf8data++ = XCL_SINGLE;
class_utf8data += _pcre_ord2utf8(othercase, class_utf8data);
}
}
#endif /* SUPPORT_UCP */
}
else
#endif /* SUPPORT_UTF8 */
/* Handle a single-byte character */
{
classbits[c/8] |= (1 << (c&7));
if ((options & PCRE_CASELESS) != 0)
{
c = cd->fcc[c]; /* flip case */
classbits[c/8] |= (1 << (c&7));
}
class_charcount++;
class_lastchar = c;
}
}
/* Loop until ']' reached; the check for end of string happens inside the
loop. This "while" is the end of the "do" above. */
while ((c = *(++ptr)) != ']' || inescq);
/* If class_charcount is 1, we saw precisely one character whose value is
less than 256. In non-UTF-8 mode we can always optimize. In UTF-8 mode, we
can optimize the negative case only if there were no characters >= 128
because OP_NOT and the related opcodes like OP_NOTSTAR operate on
single-bytes only. This is an historical hangover. Maybe one day we can
tidy these opcodes to handle multi-byte characters.
The optimization throws away the bit map. We turn the item into a
1-character OP_CHAR[NC] if it's positive, or OP_NOT if it's negative. Note
that OP_NOT does not support multibyte characters. In the positive case, it
can cause firstbyte to be set. Otherwise, there can be no first char if
this item is first, whatever repeat count may follow. In the case of
reqbyte, save the previous value for reinstating. */
#ifdef SUPPORT_UTF8
if (class_charcount == 1 &&
(!utf8 ||
(!class_utf8 && (!negate_class || class_lastchar < 128))))
#else
if (class_charcount == 1)
#endif
{
zeroreqbyte = reqbyte;
/* The OP_NOT opcode works on one-byte characters only. */
if (negate_class)
{
if (firstbyte == REQ_UNSET) firstbyte = REQ_NONE;
zerofirstbyte = firstbyte;
*code++ = OP_NOT;
*code++ = class_lastchar;
break;
}
/* For a single, positive character, get the value into mcbuffer, and
then we can handle this with the normal one-character code. */
#ifdef SUPPORT_UTF8
if (utf8 && class_lastchar > 127)
mclength = _pcre_ord2utf8(class_lastchar, mcbuffer);
else
#endif
{
mcbuffer[0] = class_lastchar;
mclength = 1;
}
goto ONE_CHAR;
} /* End of 1-char optimization */
/* The general case - not the one-char optimization. If this is the first
thing in the branch, there can be no first char setting, whatever the
repeat count. Any reqbyte setting must remain unchanged after any kind of
repeat. */
if (firstbyte == REQ_UNSET) firstbyte = REQ_NONE;
zerofirstbyte = firstbyte;
zeroreqbyte = reqbyte;
/* If there are characters with values > 255, we have to compile an
extended class, with its own opcode. If there are no characters < 256,
we can omit the bitmap. */
#ifdef SUPPORT_UTF8
if (class_utf8)
{
*class_utf8data++ = XCL_END; /* Marks the end of extra data */
*code++ = OP_XCLASS;
code += LINK_SIZE;
*code = negate_class? XCL_NOT : 0;
/* If the map is required, install it, and move on to the end of
the extra data */
if (class_charcount > 0)
{
*code++ |= XCL_MAP;
memcpy(code, classbits, 32);
code = class_utf8data;
}
/* If the map is not required, slide down the extra data. */
else
{
int len = INT_CAST(class_utf8data - (code + 33));
memmove(code + 1, code + 33, len);
code += len + 1;
}
/* Now fill in the complete length of the item */
PUT(previous, 1, code - previous);
break; /* End of class handling */
}
#endif
/* If there are no characters > 255, negate the 32-byte map if necessary,
and copy it into the code vector. If this is the first thing in the branch,
there can be no first char setting, whatever the repeat count. Any reqbyte
setting must remain unchanged after any kind of repeat. */
if (negate_class)
{
*code++ = OP_NCLASS;
for (c = 0; c < 32; c++) code[c] = ~classbits[c];
}
else
{
*code++ = OP_CLASS;
memcpy(code, classbits, 32);
}
code += 32;
break;
/* Various kinds of repeat; '{' is not necessarily a quantifier, but this
has been tested above. */
case '{':
if (!is_quantifier) goto NORMAL_CHAR;
ptr = read_repeat_counts(ptr+1, &repeat_min, &repeat_max, errorcodeptr);
if (*errorcodeptr != 0) goto FAILED;
goto REPEAT;
case '*':
repeat_min = 0;
repeat_max = -1;
goto REPEAT;
case '+':
repeat_min = 1;
repeat_max = -1;
goto REPEAT;
case '?':
repeat_min = 0;
repeat_max = 1;
REPEAT:
if (previous == NULL)
{
*errorcodeptr = ERR9;
goto FAILED;
}
if (repeat_min == 0)
{
firstbyte = zerofirstbyte; /* Adjust for zero repeat */
reqbyte = zeroreqbyte; /* Ditto */
}
/* Remember whether this is a variable length repeat */
reqvary = (repeat_min == repeat_max)? 0 : REQ_VARY;
op_type = 0; /* Default single-char op codes */
possessive_quantifier = FALSE; /* Default not possessive quantifier */
/* Save start of previous item, in case we have to move it up to make space
for an inserted OP_ONCE for the additional '+' extension. */
tempcode = previous;
/* If the next character is '+', we have a possessive quantifier. This
implies greediness, whatever the setting of the PCRE_UNGREEDY option.
If the next character is '?' this is a minimizing repeat, by default,
but if PCRE_UNGREEDY is set, it works the other way round. We change the
repeat type to the non-default. */
if (ptr + 1 < patternEnd && ptr[1] == '+')
{
repeat_type = 0; /* Force greedy */
possessive_quantifier = TRUE;
ptr++;
}
else if (ptr + 1 < patternEnd && ptr[1] == '?')
{
repeat_type = greedy_non_default;
ptr++;
}
else repeat_type = greedy_default;
/* If previous was a recursion, we need to wrap it inside brackets so that
it can be replicated if necessary. */
if (*previous == OP_RECURSE)
{
memmove(previous + 1 + LINK_SIZE, previous, 1 + LINK_SIZE);
code += 1 + LINK_SIZE;
*previous = OP_BRA;
PUT(previous, 1, code - previous);
*code = OP_KET;
PUT(code, 1, code - previous);
code += 1 + LINK_SIZE;
}
/* If previous was a character match, abolish the item and generate a
repeat item instead. If a char item has a minumum of more than one, ensure
that it is set in reqbyte - it might not be if a sequence such as x{3} is
the first thing in a branch because the x will have gone into firstbyte
instead. */
if (*previous == OP_CHAR || *previous == OP_CHARNC)
{
/* Deal with UTF-8 characters that take up more than one byte. It's
easier to write this out separately than try to macrify it. Use c to
hold the length of the character in bytes, plus 0x80 to flag that it's a
length rather than a small character. */
#ifdef SUPPORT_UTF8
if (utf8 && (code[-1] & 0x80) != 0)
{
uschar *lastchar = code - 1;
while((*lastchar & 0xc0) == 0x80) lastchar--;
c = INT_CAST(code - lastchar); /* Length of UTF-8 character */
memcpy(utf8_char, lastchar, c); /* Save the char */
c |= 0x80; /* Flag c as a length */
}
else
#endif
/* Handle the case of a single byte - either with no UTF8 support, or
with UTF-8 disabled, or for a UTF-8 character < 128. */
{
c = code[-1];
if (repeat_min > 1) reqbyte = c | req_caseopt | cd->req_varyopt;
}
goto OUTPUT_SINGLE_REPEAT; /* Code shared with single character types */
}
/* If previous was a single negated character ([^a] or similar), we use
one of the special opcodes, replacing it. The code is shared with single-
character repeats by setting opt_type to add a suitable offset into
repeat_type. OP_NOT is currently used only for single-byte chars. */
else if (*previous == OP_NOT)
{
op_type = OP_NOTSTAR - OP_STAR; /* Use "not" opcodes */
c = previous[1];
goto OUTPUT_SINGLE_REPEAT;
}
/* If previous was a character type match (\d or similar), abolish it and
create a suitable repeat item. The code is shared with single-character
repeats by setting op_type to add a suitable offset into repeat_type. Note
the the Unicode property types will be present only when SUPPORT_UCP is
defined, but we don't wrap the little bits of code here because it just
makes it horribly messy. */
else if (*previous < OP_EODN)
{
uschar *oldcode;
int prop_type;
op_type = OP_TYPESTAR - OP_STAR; /* Use type opcodes */
c = *previous;
OUTPUT_SINGLE_REPEAT:
prop_type = (*previous == OP_PROP || *previous == OP_NOTPROP)?
previous[1] : -1;
oldcode = code;
code = previous; /* Usually overwrite previous item */
/* If the maximum is zero then the minimum must also be zero; Perl allows
this case, so we do too - by simply omitting the item altogether. */
if (repeat_max == 0) goto END_REPEAT;
/* All real repeats make it impossible to handle partial matching (maybe
one day we will be able to remove this restriction). */
if (repeat_max != 1) cd->nopartial = TRUE;
/* Combine the op_type with the repeat_type */
repeat_type += op_type;
/* A minimum of zero is handled either as the special case * or ?, or as
an UPTO, with the maximum given. */
if (repeat_min == 0)
{
if (repeat_max == -1) *code++ = OP_STAR + repeat_type;
else if (repeat_max == 1) *code++ = OP_QUERY + repeat_type;
else
{
*code++ = OP_UPTO + repeat_type;
PUT2INC(code, 0, repeat_max);
}
}
/* A repeat minimum of 1 is optimized into some special cases. If the
maximum is unlimited, we use OP_PLUS. Otherwise, the original item it
left in place and, if the maximum is greater than 1, we use OP_UPTO with
one less than the maximum. */
else if (repeat_min == 1)
{
if (repeat_max == -1)
*code++ = OP_PLUS + repeat_type;
else
{
code = oldcode; /* leave previous item in place */
if (repeat_max == 1) goto END_REPEAT;
*code++ = OP_UPTO + repeat_type;
PUT2INC(code, 0, repeat_max - 1);
}
}
/* The case {n,n} is just an EXACT, while the general case {n,m} is
handled as an EXACT followed by an UPTO. */
else
{
*code++ = OP_EXACT + op_type; /* NB EXACT doesn't have repeat_type */
PUT2INC(code, 0, repeat_min);
/* If the maximum is unlimited, insert an OP_STAR. Before doing so,
we have to insert the character for the previous code. For a repeated
Unicode property match, there is an extra byte that defines the
required property. In UTF-8 mode, long characters have their length in
c, with the 0x80 bit as a flag. */
if (repeat_max < 0)
{
#ifdef SUPPORT_UTF8
if (utf8 && c >= 128)
{
memcpy(code, utf8_char, c & 7);
code += c & 7;
}
else
#endif
{
*code++ = c;
if (prop_type >= 0) *code++ = prop_type;
}
*code++ = OP_STAR + repeat_type;
}
/* Else insert an UPTO if the max is greater than the min, again
preceded by the character, for the previously inserted code. */
else if (repeat_max != repeat_min)
{
#ifdef SUPPORT_UTF8
if (utf8 && c >= 128)
{
memcpy(code, utf8_char, c & 7);
code += c & 7;
}
else
#endif
*code++ = c;
if (prop_type >= 0) *code++ = prop_type;
repeat_max -= repeat_min;
*code++ = OP_UPTO + repeat_type;
PUT2INC(code, 0, repeat_max);
}
}
/* The character or character type itself comes last in all cases. */
#ifdef SUPPORT_UTF8
if (utf8 && c >= 128)
{
memcpy(code, utf8_char, c & 7);
code += c & 7;
}
else
#endif
*code++ = c;
/* For a repeated Unicode property match, there is an extra byte that
defines the required property. */
#ifdef SUPPORT_UCP
if (prop_type >= 0) *code++ = prop_type;
#endif
}
/* If previous was a character class or a back reference, we put the repeat
stuff after it, but just skip the item if the repeat was {0,0}. */
else if (*previous == OP_CLASS ||
*previous == OP_NCLASS ||
#ifdef SUPPORT_UTF8
*previous == OP_XCLASS ||
#endif
*previous == OP_REF)
{
if (repeat_max == 0)
{
code = previous;
goto END_REPEAT;
}
/* All real repeats make it impossible to handle partial matching (maybe
one day we will be able to remove this restriction). */
if (repeat_max != 1) cd->nopartial = TRUE;
if (repeat_min == 0 && repeat_max == -1)
*code++ = OP_CRSTAR + repeat_type;
else if (repeat_min == 1 && repeat_max == -1)
*code++ = OP_CRPLUS + repeat_type;
else if (repeat_min == 0 && repeat_max == 1)
*code++ = OP_CRQUERY + repeat_type;
else
{
*code++ = OP_CRRANGE + repeat_type;
PUT2INC(code, 0, repeat_min);
if (repeat_max == -1) repeat_max = 0; /* 2-byte encoding for max */
PUT2INC(code, 0, repeat_max);
}
}
/* If previous was a bracket group, we may have to replicate it in certain
cases. */
else if (*previous >= OP_BRA || *previous == OP_ONCE ||
*previous == OP_COND)
{
register int i;
int ketoffset = 0;
int len = INT_CAST(code - previous);
uschar *bralink = NULL;
/* If the maximum repeat count is unlimited, find the end of the bracket
by scanning through from the start, and compute the offset back to it
from the current code pointer. There may be an OP_OPT setting following
the final KET, so we can't find the end just by going back from the code
pointer. */
if (repeat_max == -1)
{
register uschar *ket = previous;
do ket += GET(ket, 1); while (*ket != OP_KET);
ketoffset = INT_CAST(code - ket);
}
/* The case of a zero minimum is special because of the need to stick
OP_BRAZERO in front of it, and because the group appears once in the
data, whereas in other cases it appears the minimum number of times. For
this reason, it is simplest to treat this case separately, as otherwise
the code gets far too messy. There are several special subcases when the
minimum is zero. */
if (repeat_min == 0)
{
/* If the maximum is also zero, we just omit the group from the output
altogether. */
if (repeat_max == 0)
{
code = previous;
goto END_REPEAT;
}
/* If the maximum is 1 or unlimited, we just have to stick in the
BRAZERO and do no more at this point. However, we do need to adjust
any OP_RECURSE calls inside the group that refer to the group itself or
any internal group, because the offset is from the start of the whole
regex. Temporarily terminate the pattern while doing this. */
if (repeat_max <= 1)
{
*code = OP_END;
adjust_recurse(previous, 1, utf8, cd);
memmove(previous+1, previous, len);
code++;
*previous++ = OP_BRAZERO + repeat_type;
}
/* If the maximum is greater than 1 and limited, we have to replicate
in a nested fashion, sticking OP_BRAZERO before each set of brackets.
The first one has to be handled carefully because it's the original
copy, which has to be moved up. The remainder can be handled by code
that is common with the non-zero minimum case below. We have to
adjust the value or repeat_max, since one less copy is required. Once
again, we may have to adjust any OP_RECURSE calls inside the group. */
else
{
int offset, tmpoffset;
*code = OP_END;
adjust_recurse(previous, 2 + LINK_SIZE, utf8, cd);
memmove(previous + 2 + LINK_SIZE, previous, len);
code += 2 + LINK_SIZE;
*previous++ = OP_BRAZERO + repeat_type;
*previous++ = OP_BRA;
/* We chain together the bracket offset fields that have to be
filled in later when the ends of the brackets are reached. */
tmpoffset = INT_CAST(previous - bralink);
offset = (bralink == NULL)? 0 : tmpoffset;
bralink = previous;
PUTINC(previous, 0, offset);
}
repeat_max--;
}
/* If the minimum is greater than zero, replicate the group as many
times as necessary, and adjust the maximum to the number of subsequent
copies that we need. If we set a first char from the group, and didn't
set a required char, copy the latter from the former. */
else
{
if (repeat_min > 1)
{
if (groupsetfirstbyte && reqbyte < 0) reqbyte = firstbyte;
for (i = 1; i < repeat_min; i++)
{
memcpy(code, previous, len);
code += len;
}
}
if (repeat_max > 0) repeat_max -= repeat_min;
}
/* This code is common to both the zero and non-zero minimum cases. If
the maximum is limited, it replicates the group in a nested fashion,
remembering the bracket starts on a stack. In the case of a zero minimum,
the first one was set up above. In all cases the repeat_max now specifies
the number of additional copies needed. */
if (repeat_max >= 0)
{
for (i = repeat_max - 1; i >= 0; i--)
{
*code++ = OP_BRAZERO + repeat_type;
/* All but the final copy start a new nesting, maintaining the
chain of brackets outstanding. */
if (i != 0)
{
int offset, tmpoffset;
*code++ = OP_BRA;
tmpoffset = INT_CAST(code - bralink);
offset = (bralink == NULL)? 0 : tmpoffset;
bralink = code;
PUTINC(code, 0, offset);
}
memcpy(code, previous, len);
code += len;
}
/* Now chain through the pending brackets, and fill in their length
fields (which are holding the chain links pro tem). */
while (bralink != NULL)
{
int oldlinkoffset;
int offset = INT_CAST(code - bralink + 1);
uschar *bra = code - offset;
oldlinkoffset = GET(bra, 1);
bralink = (oldlinkoffset == 0)? NULL : bralink - oldlinkoffset;
*code++ = OP_KET;
PUTINC(code, 0, offset);
PUT(bra, 1, offset);
}
}
/* If the maximum is unlimited, set a repeater in the final copy. We
can't just offset backwards from the current code point, because we
don't know if there's been an options resetting after the ket. The
correct offset was computed above. */
else code[-ketoffset] = OP_KETRMAX + repeat_type;
}
/* Else there's some kind of shambles */
else
{
*errorcodeptr = ERR11;
goto FAILED;
}
/* If the character following a repeat is '+', we wrap the entire repeated
item inside OP_ONCE brackets. This is just syntactic sugar, taken from
Sun's Java package. The repeated item starts at tempcode, not at previous,
which might be the first part of a string whose (former) last char we
repeated. However, we don't support '+' after a greediness '?'. */
if (possessive_quantifier)
{
int len = INT_CAST(code - tempcode);
memmove(tempcode + 1+LINK_SIZE, tempcode, len);
code += 1 + LINK_SIZE;
len += 1 + LINK_SIZE;
tempcode[0] = OP_ONCE;
*code++ = OP_KET;
PUTINC(code, 0, len);
PUT(tempcode, 1, len);
}
/* In all case we no longer have a previous item. We also set the
"follows varying string" flag for subsequently encountered reqbytes if
it isn't already set and we have just passed a varying length item. */
END_REPEAT:
previous = NULL;
cd->req_varyopt |= reqvary;
break;
/* Start of nested bracket sub-expression, or comment or lookahead or
lookbehind or option setting or condition. First deal with special things
that can come after a bracket; all are introduced by ?, and the appearance
of any of them means that this is not a referencing group. They were
checked for validity in the first pass over the string, so we don't have to
check for syntax errors here. */
case '(':
newoptions = options;
skipbytes = 0;
if (*(++ptr) == '?')
{
int set, unset;
int *optset;
switch (*(++ptr))
{
case '#': /* Comment; skip to ket */
ptr++;
while (*ptr != ')') ptr++;
continue;
case ':': /* Non-extracting bracket */
bravalue = OP_BRA;
ptr++;
break;
case '(':
bravalue = OP_COND; /* Conditional group */
/* Condition to test for recursion */
if (ptr[1] == 'R')
{
code[1+LINK_SIZE] = OP_CREF;
PUT2(code, 2+LINK_SIZE, CREF_RECURSE);
skipbytes = 3;
ptr += 3;
}
/* Condition to test for a numbered subpattern match. We know that
if a digit follows ( then there will just be digits until ) because
the syntax was checked in the first pass. */
else if ((DIGITAB(ptr[1]) && ctype_digit) != 0)
{
int condref; /* Don't amalgamate; some compilers */
condref = *(++ptr) - '0'; /* grumble at autoincrement in declaration */
while (*(++ptr) != ')') condref = condref*10 + *ptr - '0';
if (condref == 0)
{
*errorcodeptr = ERR35;
goto FAILED;
}
ptr++;
code[1+LINK_SIZE] = OP_CREF;
PUT2(code, 2+LINK_SIZE, condref);
skipbytes = 3;
}
/* For conditions that are assertions, we just fall through, having
set bravalue above. */
break;
case '=': /* Positive lookahead */
bravalue = OP_ASSERT;
ptr++;
break;
case '!': /* Negative lookahead */
bravalue = OP_ASSERT_NOT;
ptr++;
break;
case '<': /* Lookbehinds */
switch (*(++ptr))
{
case '=': /* Positive lookbehind */
bravalue = OP_ASSERTBACK;
ptr++;
break;
case '!': /* Negative lookbehind */
bravalue = OP_ASSERTBACK_NOT;
ptr++;
break;
}
break;
case '>': /* One-time brackets */
bravalue = OP_ONCE;
ptr++;
break;
case 'C': /* Callout - may be followed by digits; */
previous_callout = code; /* Save for later completion */
after_manual_callout = 1; /* Skip one item before completing */
*code++ = OP_CALLOUT; /* Already checked that the terminating */
{ /* closing parenthesis is present. */
int n = 0;
++ptr;
while ((DIGITAB(*ptr) & ctype_digit) != 0)
{
n = n * 10 + *ptr - '0';
++ptr;
}
if (n > 255)
{
*errorcodeptr = ERR38;
goto FAILED;
}
*code++ = n;
PUT(code, 0, ptr - cd->start_pattern + 1); /* Pattern offset */
PUT(code, LINK_SIZE, 0); /* Default length */
code += 2 * LINK_SIZE;
}
previous = NULL;
continue;
case 'P': /* Named subpattern handling */
if (*(++ptr) == '<') /* Definition */
{
int i, namelen;
uschar *slot = cd->name_table;
const pcre_uchar *name; /* Don't amalgamate; some compilers */
name = ++ptr; /* grumble at autoincrement in declaration */
while (*ptr++ != '>');
namelen = INT_CAST(ptr - name - 1);
/* FIXME: This won't work for UTF-16. */
for (i = 0; i < cd->names_found; i++)
{
int crc = memcmp(name, slot+2, namelen);
if (crc == 0)
{
if (slot[2+namelen] == 0)
{
*errorcodeptr = ERR43;
goto FAILED;
}
crc = -1; /* Current name is substring */
}
if (crc < 0)
{
memmove(slot + cd->name_entry_size, slot,
(cd->names_found - i) * cd->name_entry_size);
break;
}
slot += cd->name_entry_size;
}
PUT2(slot, 0, *brackets + 1);
memcpy(slot + 2, name, namelen);
slot[2+namelen] = 0;
cd->names_found++;
goto NUMBERED_GROUP;
}
if (*ptr == '=' || *ptr == '>') /* Reference or recursion */
{
int i, namelen;
int type = *ptr++;
const pcre_uchar *name = ptr;
uschar *slot = cd->name_table;
while (*ptr != ')') ptr++;
namelen = INT_CAST(ptr - name);
for (i = 0; i < cd->names_found; i++)
{
if (STREQUAL(name, namelen, (char *)slot+2)) break;
slot += cd->name_entry_size;
}
if (i >= cd->names_found)
{
*errorcodeptr = ERR15;
goto FAILED;
}
recno = GET2(slot, 0);
if (type == '>') goto HANDLE_RECURSION; /* A few lines below */
/* Back reference */
previous = code;
*code++ = OP_REF;
PUT2INC(code, 0, recno);
cd->backref_map |= (recno < 32)? (1 << recno) : 1;
if (recno > cd->top_backref) cd->top_backref = recno;
continue;
}
/* Should never happen */
break;
case 'R': /* Pattern recursion */
ptr++; /* Same as (?0) */
/* Fall through */
/* Recursion or "subroutine" call */
case '0': case '1': case '2': case '3': case '4':
case '5': case '6': case '7': case '8': case '9':
{
const uschar *called;
recno = 0;
while((DIGITAB(*ptr) & ctype_digit) != 0)
recno = recno * 10 + *ptr++ - '0';
/* Come here from code above that handles a named recursion */
HANDLE_RECURSION:
previous = code;
/* Find the bracket that is being referenced. Temporarily end the
regex in case it doesn't exist. */
*code = OP_END;
called = (recno == 0)?
cd->start_code : find_bracket(cd->start_code, utf8, recno);
if (called == NULL)
{
*errorcodeptr = ERR15;
goto FAILED;
}
/* If the subpattern is still open, this is a recursive call. We
check to see if this is a left recursion that could loop for ever,
and diagnose that case. */
if (GET(called, 1) == 0 && could_be_empty(called, code, bcptr, utf8))
{
*errorcodeptr = ERR40;
goto FAILED;
}
/* Insert the recursion/subroutine item */
*code = OP_RECURSE;
PUT(code, 1, called - cd->start_code);
code += 1 + LINK_SIZE;
}
continue;
/* Character after (? not specially recognized */
default: /* Option setting */
set = unset = 0;
optset = &set;
while (*ptr != ')' && *ptr != ':')
{
switch (*ptr++)
{
case '-': optset = &unset; break;
case 'i': *optset |= PCRE_CASELESS; break;
case 'm': *optset |= PCRE_MULTILINE; break;
case 's': *optset |= PCRE_DOTALL; break;
case 'x': *optset |= PCRE_EXTENDED; break;
case 'U': *optset |= PCRE_UNGREEDY; break;
case 'X': *optset |= PCRE_EXTRA; break;
}
}
/* Set up the changed option bits, but don't change anything yet. */
newoptions = (options | set) & (~unset);
/* If the options ended with ')' this is not the start of a nested
group with option changes, so the options change at this level. Compile
code to change the ims options if this setting actually changes any of
them. We also pass the new setting back so that it can be put at the
start of any following branches, and when this group ends (if we are in
a group), a resetting item can be compiled.
Note that if this item is right at the start of the pattern, the
options will have been abstracted and made global, so there will be no
change to compile. */
if (*ptr == ')')
{
if ((options & PCRE_IMS) != (newoptions & PCRE_IMS))
{
*code++ = OP_OPT;
*code++ = newoptions & PCRE_IMS;
}
/* Change options at this level, and pass them back for use
in subsequent branches. Reset the greedy defaults and the case
value for firstbyte and reqbyte. */
*optionsptr = options = newoptions;
greedy_default = ((newoptions & PCRE_UNGREEDY) != 0);
greedy_non_default = greedy_default ^ 1;
req_caseopt = ((options & PCRE_CASELESS) != 0)? REQ_CASELESS : 0;
previous = NULL; /* This item can't be repeated */
continue; /* It is complete */
}
/* If the options ended with ':' we are heading into a nested group
with possible change of options. Such groups are non-capturing and are
not assertions of any kind. All we need to do is skip over the ':';
the newoptions value is handled below. */
bravalue = OP_BRA;
ptr++;
}
}
/* If PCRE_NO_AUTO_CAPTURE is set, all unadorned brackets become
non-capturing and behave like (?:...) brackets */
else if ((options & PCRE_NO_AUTO_CAPTURE) != 0)
{
bravalue = OP_BRA;
}
/* Else we have a referencing group; adjust the opcode. If the bracket
number is greater than EXTRACT_BASIC_MAX, we set the opcode one higher, and
arrange for the true number to follow later, in an OP_BRANUMBER item. */
else
{
NUMBERED_GROUP:
if (++(*brackets) > EXTRACT_BASIC_MAX)
{
bravalue = OP_BRA + EXTRACT_BASIC_MAX + 1;
code[1+LINK_SIZE] = OP_BRANUMBER;
PUT2(code, 2+LINK_SIZE, *brackets);
skipbytes = 3;
}
else bravalue = OP_BRA + *brackets;
}
/* Process nested bracketed re. Assertions may not be repeated, but other
kinds can be. We copy code into a non-register variable in order to be able
to pass its address because some compilers complain otherwise. Pass in a
new setting for the ims options if they have changed. */
previous = (bravalue >= OP_ONCE)? code : NULL;
*code = bravalue;
tempcode = code;
tempreqvary = cd->req_varyopt; /* Save value before bracket */
if (!compile_regex(
newoptions, /* The complete new option state */
options & PCRE_IMS, /* The previous ims option state */
brackets, /* Extracting bracket count */
&tempcode, /* Where to put code (updated) */
&ptr, /* Input pointer (updated) */
patternEnd,
errorcodeptr, /* Where to put an error message */
(bravalue == OP_ASSERTBACK ||
bravalue == OP_ASSERTBACK_NOT), /* TRUE if back assert */
skipbytes, /* Skip over OP_COND/OP_BRANUMBER */
&subfirstbyte, /* For possible first char */
&subreqbyte, /* For possible last char */
bcptr, /* Current branch chain */
cd)) /* Tables block */
goto FAILED;
/* At the end of compiling, code is still pointing to the start of the
group, while tempcode has been updated to point past the end of the group
and any option resetting that may follow it. The pattern pointer (ptr)
is on the bracket. */
/* If this is a conditional bracket, check that there are no more than
two branches in the group. */
else if (bravalue == OP_COND)
{
uschar *tc = code;
condcount = 0;
do {
condcount++;
tc += GET(tc,1);
}
while (*tc != OP_KET);
if (condcount > 2)
{
*errorcodeptr = ERR27;
goto FAILED;
}
/* If there is just one branch, we must not make use of its firstbyte or
reqbyte, because this is equivalent to an empty second branch. */
if (condcount == 1) subfirstbyte = subreqbyte = REQ_NONE;
}
/* Handle updating of the required and first characters. Update for normal
brackets of all kinds, and conditions with two branches (see code above).
If the bracket is followed by a quantifier with zero repeat, we have to
back off. Hence the definition of zeroreqbyte and zerofirstbyte outside the
main loop so that they can be accessed for the back off. */
zeroreqbyte = reqbyte;
zerofirstbyte = firstbyte;
groupsetfirstbyte = FALSE;
if (bravalue >= OP_BRA || bravalue == OP_ONCE || bravalue == OP_COND)
{
/* If we have not yet set a firstbyte in this branch, take it from the
subpattern, remembering that it was set here so that a repeat of more
than one can replicate it as reqbyte if necessary. If the subpattern has
no firstbyte, set "none" for the whole branch. In both cases, a zero
repeat forces firstbyte to "none". */
if (firstbyte == REQ_UNSET)
{
if (subfirstbyte >= 0)
{
firstbyte = subfirstbyte;
groupsetfirstbyte = TRUE;
}
else firstbyte = REQ_NONE;
zerofirstbyte = REQ_NONE;
}
/* If firstbyte was previously set, convert the subpattern's firstbyte
into reqbyte if there wasn't one, using the vary flag that was in
existence beforehand. */
else if (subfirstbyte >= 0 && subreqbyte < 0)
subreqbyte = subfirstbyte | tempreqvary;
/* If the subpattern set a required byte (or set a first byte that isn't
really the first byte - see above), set it. */
if (subreqbyte >= 0) reqbyte = subreqbyte;
}
/* For a forward assertion, we take the reqbyte, if set. This can be
helpful if the pattern that follows the assertion doesn't set a different
char. For example, it's useful for /(?=abcde).+/. We can't set firstbyte
for an assertion, however because it leads to incorrect effect for patterns
such as /(?=a)a.+/ when the "real" "a" would then become a reqbyte instead
of a firstbyte. This is overcome by a scan at the end if there's no
firstbyte, looking for an asserted first char. */
else if (bravalue == OP_ASSERT && subreqbyte >= 0) reqbyte = subreqbyte;
/* Now update the main code pointer to the end of the group. */
code = tempcode;
/* Error if hit end of pattern */
if (ptr > patternEnd || *ptr != ')')
{
*errorcodeptr = ERR14;
goto FAILED;
}
break;
/* Check \ for being a real metacharacter; if not, fall through and handle
it as a data character at the start of a string. Escape items are checked
for validity in the pre-compiling pass. */
case '\\':
tempptr = ptr;
c = check_escape(&ptr, patternEnd, errorcodeptr, *brackets, options, FALSE);
/* Handle metacharacters introduced by \. For ones like \d, the ESC_ values
are arranged to be the negation of the corresponding OP_values. For the
back references, the values are ESC_REF plus the reference number. Only
back references and those types that consume a character may be repeated.
We can test for values between ESC_b and ESC_Z for the latter; this may
have to change if any new ones are ever created. */
if (c < 0)
{
if (-c == ESC_Q) /* Handle start of quoted string */
{
if (ptr + 2 < patternEnd && ptr[1] == '\\' && ptr[2] == 'E') ptr += 2; /* avoid empty string */
else inescq = TRUE;
continue;
}
/* For metasequences that actually match a character, we disable the
setting of a first character if it hasn't already been set. */
if (firstbyte == REQ_UNSET && -c > ESC_b && -c < ESC_Z)
firstbyte = REQ_NONE;
/* Set values to reset to if this is followed by a zero repeat. */
zerofirstbyte = firstbyte;
zeroreqbyte = reqbyte;
/* Back references are handled specially */
if (-c >= ESC_REF)
{
int number = -c - ESC_REF;
previous = code;
*code++ = OP_REF;
PUT2INC(code, 0, number);
}
/* So are Unicode property matches, if supported. We know that get_ucp
won't fail because it was tested in the pre-pass. */
#ifdef SUPPORT_UCP
else if (-c == ESC_P || -c == ESC_p)
{
BOOL negated = 0;
int value = get_ucp(&ptr, patternEnd, &negated, errorcodeptr);
previous = code;
*code++ = ((-c == ESC_p) != negated)? OP_PROP : OP_NOTPROP;
*code++ = value;
}
#endif
/* For the rest, we can obtain the OP value by negating the escape
value */
else
{
previous = (-c > ESC_b && -c < ESC_Z)? code : NULL;
*code++ = -c;
}
continue;
}
/* We have a data character whose value is in c. In UTF-8 mode it may have
a value > 127. We set its representation in the length/buffer, and then
handle it as a data character. */
#ifdef SUPPORT_UTF8
if (utf8 && c > 127)
mclength = _pcre_ord2utf8(c, mcbuffer);
else
#endif
{
mcbuffer[0] = c;
mclength = 1;
}
goto ONE_CHAR;
/* Handle a literal character. It is guaranteed not to be whitespace or #
when the extended flag is set. If we are in UTF-8 mode, it may be a
multi-byte literal character. */
default:
NORMAL_CHAR:
#if PCRE_UTF16
if (c < 128)
{
mclength = 1;
mcbuffer[0] = c;
}
else
mclength = _pcre_ord2utf8(c, mcbuffer);
#else
mclength = 1;
mcbuffer[0] = c;
#ifdef SUPPORT_UTF8
if (utf8 && (c & 0xc0) == 0xc0)
{
while (ptr + 1 < patternEnd && (ptr[1] & 0xc0) == 0x80)
mcbuffer[mclength++] = *(++ptr);
}
#endif
#endif
/* At this point we have the character's bytes in mcbuffer, and the length
in mclength. When not in UTF-8 mode, the length is always 1. */
ONE_CHAR:
previous = code;
*code++ = ((options & PCRE_CASELESS) != 0)? OP_CHARNC : OP_CHAR;
for (c = 0; c < mclength; c++) *code++ = mcbuffer[c];
/* Set the first and required bytes appropriately. If no previous first
byte, set it from this character, but revert to none on a zero repeat.
Otherwise, leave the firstbyte value alone, and don't change it on a zero
repeat. */
if (firstbyte == REQ_UNSET)
{
zerofirstbyte = REQ_NONE;
zeroreqbyte = reqbyte;
/* If the character is more than one byte long, we can set firstbyte
only if it is not to be matched caselessly. */
if (mclength == 1 || req_caseopt == 0)
{
firstbyte = mcbuffer[0] | req_caseopt;
if (mclength != 1) reqbyte = code[-1] | cd->req_varyopt;
}
else firstbyte = reqbyte = REQ_NONE;
}
/* firstbyte was previously set; we can set reqbyte only the length is
1 or the matching is caseful. */
else
{
zerofirstbyte = firstbyte;
zeroreqbyte = reqbyte;
if (mclength == 1 || req_caseopt == 0)
reqbyte = code[-1] | req_caseopt | cd->req_varyopt;
}
break; /* End of literal character handling */
}
} /* end of big loop */
/* Control never reaches here by falling through, only by a goto for all the
error states. Pass back the position in the pattern so that it can be displayed
to the user for diagnosing the error. */
FAILED:
*ptrptr = ptr;
return FALSE;
}
/*************************************************
* Compile sequence of alternatives *
*************************************************/
/* On entry, ptr is pointing past the bracket character, but on return
it points to the closing bracket, or vertical bar, or end of string.
The code variable is pointing at the byte into which the BRA operator has been
stored. If the ims options are changed at the start (for a (?ims: group) or
during any branch, we need to insert an OP_OPT item at the start of every
following branch to ensure they get set correctly at run time, and also pass
the new options into every subsequent branch compile.
Argument:
options option bits, including any changes for this subpattern
oldims previous settings of ims option bits
brackets -> int containing the number of extracting brackets used
codeptr -> the address of the current code pointer
ptrptr -> the address of the current pattern pointer
errorcodeptr -> pointer to error code variable
lookbehind TRUE if this is a lookbehind assertion
skipbytes skip this many bytes at start (for OP_COND, OP_BRANUMBER)
firstbyteptr place to put the first required character, or a negative number
reqbyteptr place to put the last required character, or a negative number
bcptr pointer to the chain of currently open branches
cd points to the data block with tables pointers etc.
Returns: TRUE on success
*/
static BOOL
compile_regex(int options, int oldims, int *brackets, uschar **codeptr,
const pcre_uchar **ptrptr, const pcre_uchar *patternEnd, int *errorcodeptr, BOOL lookbehind, int skipbytes,
int *firstbyteptr, int *reqbyteptr, branch_chain *bcptr, compile_data *cd)
{
const pcre_uchar *ptr = *ptrptr;
uschar *code = *codeptr;
uschar *last_branch = code;
uschar *start_bracket = code;
uschar *reverse_count = NULL;
int firstbyte, reqbyte;
int branchfirstbyte, branchreqbyte;
branch_chain bc;
bc.outer = bcptr;
bc.current = code;
firstbyte = reqbyte = REQ_UNSET;
/* Offset is set zero to mark that this bracket is still open */
PUT(code, 1, 0);
code += 1 + LINK_SIZE + skipbytes;
/* Loop for each alternative branch */
for (;;)
{
/* Handle a change of ims options at the start of the branch */
if ((options & PCRE_IMS) != oldims)
{
*code++ = OP_OPT;
*code++ = options & PCRE_IMS;
}
/* Set up dummy OP_REVERSE if lookbehind assertion */
if (lookbehind)
{
*code++ = OP_REVERSE;
reverse_count = code;
PUTINC(code, 0, 0);
}
/* Now compile the branch */
if (!compile_branch(&options, brackets, &code, &ptr, patternEnd, errorcodeptr,
&branchfirstbyte, &branchreqbyte, &bc, cd))
{
*ptrptr = ptr;
return FALSE;
}
/* If this is the first branch, the firstbyte and reqbyte values for the
branch become the values for the regex. */
if (*last_branch != OP_ALT)
{
firstbyte = branchfirstbyte;
reqbyte = branchreqbyte;
}
/* If this is not the first branch, the first char and reqbyte have to
match the values from all the previous branches, except that if the previous
value for reqbyte didn't have REQ_VARY set, it can still match, and we set
REQ_VARY for the regex. */
else
{
/* If we previously had a firstbyte, but it doesn't match the new branch,
we have to abandon the firstbyte for the regex, but if there was previously
no reqbyte, it takes on the value of the old firstbyte. */
if (firstbyte >= 0 && firstbyte != branchfirstbyte)
{
if (reqbyte < 0) reqbyte = firstbyte;
firstbyte = REQ_NONE;
}
/* If we (now or from before) have no firstbyte, a firstbyte from the
branch becomes a reqbyte if there isn't a branch reqbyte. */
if (firstbyte < 0 && branchfirstbyte >= 0 && branchreqbyte < 0)
branchreqbyte = branchfirstbyte;
/* Now ensure that the reqbytes match */
if ((reqbyte & ~REQ_VARY) != (branchreqbyte & ~REQ_VARY))
reqbyte = REQ_NONE;
else reqbyte |= branchreqbyte; /* To "or" REQ_VARY */
}
/* If lookbehind, check that this branch matches a fixed-length string,
and put the length into the OP_REVERSE item. Temporarily mark the end of
the branch with OP_END. */
if (lookbehind)
{
int length;
*code = OP_END;
length = find_fixedlength(last_branch, options);
DPRINTF(("fixed length = %d\n", length));
if (length < 0)
{
*errorcodeptr = (length == -2)? ERR36 : ERR25;
*ptrptr = ptr;
return FALSE;
}
PUT(reverse_count, 0, length);
}
/* Reached end of expression, either ')' or end of pattern. Go back through
the alternative branches and reverse the chain of offsets, with the field in
the BRA item now becoming an offset to the first alternative. If there are
no alternatives, it points to the end of the group. The length in the
terminating ket is always the length of the whole bracketed item. If any of
the ims options were changed inside the group, compile a resetting op-code
following, except at the very end of the pattern. Return leaving the pointer
at the terminating char. */
if (ptr >= patternEnd || *ptr != '|')
{
int length = INT_CAST(code - last_branch);
do
{
int prev_length = GET(last_branch, 1);
PUT(last_branch, 1, length);
length = prev_length;
last_branch -= length;
}
while (length > 0);
/* Fill in the ket */
*code = OP_KET;
PUT(code, 1, code - start_bracket);
code += 1 + LINK_SIZE;
/* Resetting option if needed */
if ((options & PCRE_IMS) != oldims && ptr < patternEnd && *ptr == ')')
{
*code++ = OP_OPT;
*code++ = oldims;
}
/* Set values to pass back */
*codeptr = code;
*ptrptr = ptr;
*firstbyteptr = firstbyte;
*reqbyteptr = reqbyte;
return TRUE;
}
/* Another branch follows; insert an "or" node. Its length field points back
to the previous branch while the bracket remains open. At the end the chain
is reversed. It's done like this so that the start of the bracket has a
zero offset until it is closed, making it possible to detect recursion. */
*code = OP_ALT;
PUT(code, 1, code - last_branch);
bc.current = last_branch = code;
code += 1 + LINK_SIZE;
ptr++;
}
/* Control never reaches here */
}
/*************************************************
* Check for anchored expression *
*************************************************/
/* Try to find out if this is an anchored regular expression. Consider each
alternative branch. If they all start with OP_SOD or OP_CIRC, or with a bracket
all of whose alternatives start with OP_SOD or OP_CIRC (recurse ad lib), then
it's anchored. However, if this is a multiline pattern, then only OP_SOD
counts, since OP_CIRC can match in the middle.
We can also consider a regex to be anchored if OP_SOM starts all its branches.
This is the code for \G, which means "match at start of match position, taking
into account the match offset".
A branch is also implicitly anchored if it starts with .* and DOTALL is set,
because that will try the rest of the pattern at all possible matching points,
so there is no point trying again.... er ....
.... except when the .* appears inside capturing parentheses, and there is a
subsequent back reference to those parentheses. We haven't enough information
to catch that case precisely.
At first, the best we could do was to detect when .* was in capturing brackets
and the highest back reference was greater than or equal to that level.
However, by keeping a bitmap of the first 31 back references, we can catch some
of the more common cases more precisely.
Arguments:
code points to start of expression (the bracket)
options points to the options setting
bracket_map a bitmap of which brackets we are inside while testing; this
handles up to substring 31; after that we just have to take
the less precise approach
backref_map the back reference bitmap
Returns: TRUE or FALSE
*/
static BOOL
is_anchored(register const uschar *code, int *options, unsigned int bracket_map,
unsigned int backref_map)
{
do {
const uschar *scode =
first_significant_code(code + 1+LINK_SIZE, options, PCRE_MULTILINE, FALSE);
register int op = *scode;
/* Capturing brackets */
if (op > OP_BRA)
{
int new_map;
op -= OP_BRA;
if (op > EXTRACT_BASIC_MAX) op = GET2(scode, 2+LINK_SIZE);
new_map = bracket_map | ((op < 32)? (1 << op) : 1);
if (!is_anchored(scode, options, new_map, backref_map)) return FALSE;
}
/* Other brackets */
else if (op == OP_BRA || op == OP_ASSERT || op == OP_ONCE || op == OP_COND)
{
if (!is_anchored(scode, options, bracket_map, backref_map)) return FALSE;
}
/* .* is not anchored unless DOTALL is set and it isn't in brackets that
are or may be referenced. */
else if ((op == OP_TYPESTAR || op == OP_TYPEMINSTAR) &&
(*options & PCRE_DOTALL) != 0)
{
if (scode[1] != OP_ANY || (bracket_map & backref_map) != 0) return FALSE;
}
/* Check for explicit anchoring */
else if (op != OP_SOD && op != OP_SOM &&
((*options & PCRE_MULTILINE) != 0 || op != OP_CIRC))
return FALSE;
code += GET(code, 1);
}
while (*code == OP_ALT); /* Loop for each alternative */
return TRUE;
}
/*************************************************
* Check for starting with ^ or .* *
*************************************************/
/* This is called to find out if every branch starts with ^ or .* so that
"first char" processing can be done to speed things up in multiline
matching and for non-DOTALL patterns that start with .* (which must start at
the beginning or after \n). As in the case of is_anchored() (see above), we
have to take account of back references to capturing brackets that contain .*
because in that case we can't make the assumption.
Arguments:
code points to start of expression (the bracket)
bracket_map a bitmap of which brackets we are inside while testing; this
handles up to substring 31; after that we just have to take
the less precise approach
backref_map the back reference bitmap
Returns: TRUE or FALSE
*/
static BOOL
is_startline(const uschar *code, unsigned int bracket_map,
unsigned int backref_map)
{
do {
const uschar *scode = first_significant_code(code + 1+LINK_SIZE, NULL, 0,
FALSE);
register int op = *scode;
/* Capturing brackets */
if (op > OP_BRA)
{
int new_map;
op -= OP_BRA;
if (op > EXTRACT_BASIC_MAX) op = GET2(scode, 2+LINK_SIZE);
new_map = bracket_map | ((op < 32)? (1 << op) : 1);
if (!is_startline(scode, new_map, backref_map)) return FALSE;
}
/* Other brackets */
else if (op == OP_BRA || op == OP_ASSERT || op == OP_ONCE || op == OP_COND)
{ if (!is_startline(scode, bracket_map, backref_map)) return FALSE; }
/* .* means "start at start or after \n" if it isn't in brackets that
may be referenced. */
else if (op == OP_TYPESTAR || op == OP_TYPEMINSTAR)
{
if (scode[1] != OP_ANY || (bracket_map & backref_map) != 0) return FALSE;
}
/* Check for explicit circumflex */
else if (op != OP_CIRC) return FALSE;
/* Move on to the next alternative */
code += GET(code, 1);
}
while (*code == OP_ALT); /* Loop for each alternative */
return TRUE;
}
/*************************************************
* Check for asserted fixed first char *
*************************************************/
/* During compilation, the "first char" settings from forward assertions are
discarded, because they can cause conflicts with actual literals that follow.
However, if we end up without a first char setting for an unanchored pattern,
it is worth scanning the regex to see if there is an initial asserted first
char. If all branches start with the same asserted char, or with a bracket all
of whose alternatives start with the same asserted char (recurse ad lib), then
we return that char, otherwise -1.
Arguments:
code points to start of expression (the bracket)
options pointer to the options (used to check casing changes)
inassert TRUE if in an assertion
Returns: -1 or the fixed first char
*/
static int
find_firstassertedchar(const uschar *code, int *options, BOOL inassert)
{
register int c = -1;
do {
int d;
const uschar *scode =
first_significant_code(code + 1+LINK_SIZE, options, PCRE_CASELESS, TRUE);
register int op = *scode;
if (op >= OP_BRA) op = OP_BRA;
switch(op)
{
default:
return -1;
case OP_BRA:
case OP_ASSERT:
case OP_ONCE:
case OP_COND:
if ((d = find_firstassertedchar(scode, options, op == OP_ASSERT)) < 0)
return -1;
if (c < 0) c = d; else if (c != d) return -1;
break;
case OP_EXACT: /* Fall through */
scode += 2;
case OP_CHAR:
case OP_CHARNC:
case OP_PLUS:
case OP_MINPLUS:
if (!inassert) return -1;
if (c < 0)
{
c = scode[1];
if ((*options & PCRE_CASELESS) != 0) c |= REQ_CASELESS;
}
else if (c != scode[1]) return -1;
break;
}
code += GET(code, 1);
}
while (*code == OP_ALT);
return c;
}
/*************************************************
* Compile a Regular Expression *
*************************************************/
/* This function takes a string and returns a pointer to a block of store
holding a compiled version of the expression. The original API for this
function had no error code return variable; it is retained for backwards
compatibility. The new function is given a new name.
Arguments:
pattern the regular expression
options various option bits
errorcodeptr pointer to error code variable (pcre_compile2() only)
can be NULL if you don't want a code value
errorptr pointer to pointer to error text
erroroffset ptr offset in pattern where error was detected
tables pointer to character tables or NULL
Returns: pointer to compiled data block, or NULL on error,
with errorptr and erroroffset set
*/
PCRE_EXPORT pcre *
pcre_compile(const pcre_char *pattern, int patternLength, int options, const char **errorptr,
int *erroroffset, const unsigned char *tables)
{
return pcre_compile2(pattern, patternLength, options, NULL, errorptr, erroroffset, tables);
}
PCRE_EXPORT pcre *
pcre_compile2(const pcre_char *pattern, int patternLength, int options, int *errorcodeptr,
const char **errorptr, int *erroroffset, const unsigned char *tables)
{
real_pcre *re;
int length = 1 + LINK_SIZE; /* For initial BRA plus length */
int c, firstbyte, reqbyte;
int bracount = 0;
int branch_extra = 0;
int branch_newextra;
int item_count = -1;
int name_count = 0;
int max_name_size = 0;
int lastitemlength = 0;
int errorcode = 0;
#ifdef SUPPORT_UTF8
BOOL utf8;
BOOL class_utf8;
#endif
BOOL inescq = FALSE;
BOOL capturing;
unsigned int brastackptr = 0;
size_t size;
uschar *code;
const uschar *codestart;
const pcre_uchar *ptr;
const pcre_uchar *patternEnd;
compile_data compile_block;
int brastack[BRASTACK_SIZE];
uschar bralenstack[BRASTACK_SIZE];
/* We can't pass back an error message if errorptr is NULL; I guess the best we
can do is just return NULL, but we can set a code value if there is a code
pointer. */
if (errorptr == NULL)
{
if (errorcodeptr != NULL) *errorcodeptr = 99;
return NULL;
}
*errorptr = NULL;
if (errorcodeptr != NULL) *errorcodeptr = ERR0;
/* However, we can give a message for this error */
if (erroroffset == NULL)
{
errorcode = ERR16;
goto PCRE_EARLY_ERROR_RETURN;
}
*erroroffset = 0;
/* Always set the UTF-8 flag if we're compiled for UTF-16; saves on ifdefs. */
#if PCRE_UTF16
options |= PCRE_UTF8;
#endif
/* Can't support UTF8 unless PCRE has been compiled to include the code. */
#ifdef SUPPORT_UTF8
utf8 = (options & PCRE_UTF8) != 0;
#if !PCRE_UTF16
if (utf8 && (options & PCRE_NO_UTF8_CHECK) == 0 &&
(*erroroffset = _pcre_valid_utf8((pcre_uchar *)pattern, -1)) >= 0)
{
errorcode = ERR44;
goto PCRE_EARLY_ERROR_RETURN;
}
#endif
#else
if ((options & PCRE_UTF8) != 0)
{
errorcode = ERR32;
goto PCRE_EARLY_ERROR_RETURN;
}
#endif
if ((options & ~PUBLIC_OPTIONS) != 0)
{
errorcode = ERR17;
goto PCRE_EARLY_ERROR_RETURN;
}
/* Set up pointers to the individual character tables */
if (tables == NULL) tables = _pcre_default_tables;
compile_block.lcc = tables + lcc_offset;
compile_block.fcc = tables + fcc_offset;
compile_block.cbits = tables + cbits_offset;
compile_block.ctypes = tables + ctypes_offset;
/* Maximum back reference and backref bitmap. This is updated for numeric
references during the first pass, but for named references during the actual
compile pass. The bitmap records up to 31 back references to help in deciding
whether (.*) can be treated as anchored or not. */
compile_block.top_backref = 0;
compile_block.backref_map = 0;
/* Reflect pattern for debugging output */
DPRINTF(("------------------------------------------------------------------\n"));
#if !PCRE_UTF16
DPRINTF(("%s\n", pattern));
#endif
/* The first thing to do is to make a pass over the pattern to compute the
amount of store required to hold the compiled code. This does not have to be
perfect as long as errors are overestimates. At the same time we can detect any
flag settings right at the start, and extract them. Make an attempt to correct
for any counted white space if an "extended" flag setting appears late in the
pattern. We can't be so clever for #-comments. */
ptr = (const pcre_uchar *)(pattern - 1);
patternEnd = (const pcre_uchar *)(pattern + patternLength);
while (++ptr < patternEnd)
{
int min = 0, max = 0;
int class_optcount;
int bracket_length;
int duplength;
c = *ptr;
/* If we are inside a \Q...\E sequence, all chars are literal */
if (inescq)
{
if ((options & PCRE_AUTO_CALLOUT) != 0) length += 2 + 2*LINK_SIZE;
goto NORMAL_CHAR;
}
/* Otherwise, first check for ignored whitespace and comments */
if ((options & PCRE_EXTENDED) != 0)
{
if ((CTYPES(&compile_block, c) & ctype_space) != 0) continue;
if (c == '#')
{
while (++ptr < patternEnd && (c = *ptr) != NEWLINE)
;
if (ptr == patternEnd)
break;
continue;
}
}
item_count++; /* Is zero for the first non-comment item */
/* Allow space for auto callout before every item except quantifiers. */
if ((options & PCRE_AUTO_CALLOUT) != 0 &&
c != '*' && c != '+' && c != '?' &&
(c != '{' || !is_counted_repeat(ptr + 1, patternEnd)))
length += 2 + 2*LINK_SIZE;
switch(c)
{
/* A backslashed item may be an escaped data character or it may be a
character type. */
case '\\':
c = check_escape(&ptr, patternEnd, &errorcode, bracount, options, FALSE);
if (errorcode != 0) goto PCRE_ERROR_RETURN;
lastitemlength = 1; /* Default length of last item for repeats */
if (c >= 0) /* Data character */
{
length += 2; /* For a one-byte character */
#ifdef SUPPORT_UTF8
if (utf8 && c > 127)
{
int i;
for (i = 0; i < _pcre_utf8_table1_size; i++)
if (c <= _pcre_utf8_table1[i]) break;
length += i;
lastitemlength += i;
}
#endif
continue;
}
/* If \Q, enter "literal" mode */
if (-c == ESC_Q)
{
inescq = TRUE;
continue;
}
/* \X is supported only if Unicode property support is compiled */
#ifndef SUPPORT_UCP
if (-c == ESC_X)
{
errorcode = ERR45;
goto PCRE_ERROR_RETURN;
}
#endif
/* \P and \p are for Unicode properties, but only when the support has
been compiled. Each item needs 2 bytes. */
else if (-c == ESC_P || -c == ESC_p)
{
#ifdef SUPPORT_UCP
BOOL negated;
length += 2;
lastitemlength = 2;
if (get_ucp(&ptr, patternEnd, &negated, &errorcode) < 0) goto PCRE_ERROR_RETURN;
continue;
#else
errorcode = ERR45;
goto PCRE_ERROR_RETURN;
#endif
}
/* Other escapes need one byte */
length++;
/* A back reference needs an additional 2 bytes, plus either one or 5
bytes for a repeat. We also need to keep the value of the highest
back reference. */
if (c <= -ESC_REF)
{
int refnum = -c - ESC_REF;
compile_block.backref_map |= (refnum < 32)? (1 << refnum) : 1;
if (refnum > compile_block.top_backref)
compile_block.top_backref = refnum;
length += 2; /* For single back reference */
if (ptr + 1 < patternEnd && ptr[1] == '{' && is_counted_repeat(ptr+2, patternEnd))
{
ptr = read_repeat_counts(ptr+2, &min, &max, &errorcode);
if (errorcode != 0) goto PCRE_ERROR_RETURN;
if ((min == 0 && (max == 1 || max == -1)) ||
(min == 1 && max == -1))
length++;
else length += 5;
if (ptr + 1 < patternEnd && ptr[1] == '?')
ptr++;
}
}
continue;
case '^': /* Single-byte metacharacters */
case '.':
case '$':
length++;
lastitemlength = 1;
continue;
case '*': /* These repeats won't be after brackets; */
case '+': /* those are handled separately */
case '?':
length++;
goto POSESSIVE; /* A few lines below */
/* This covers the cases of braced repeats after a single char, metachar,
class, or back reference. */
case '{':
if (!is_counted_repeat(ptr+1, patternEnd))
goto NORMAL_CHAR;
ptr = read_repeat_counts(ptr+1, &min, &max, &errorcode);
if (errorcode != 0) goto PCRE_ERROR_RETURN;
/* These special cases just insert one extra opcode */
if ((min == 0 && (max == 1 || max == -1)) ||
(min == 1 && max == -1))
length++;
/* These cases might insert additional copies of a preceding character. */
else
{
if (min != 1)
{
length -= lastitemlength; /* Uncount the original char or metachar */
if (min > 0) length += 3 + lastitemlength;
}
length += lastitemlength + ((max > 0)? 3 : 1);
}
if (ptr + 1 < patternEnd && ptr[1] == '?')
ptr++; /* Needs no extra length */
POSESSIVE: /* Test for possessive quantifier */
if (ptr + 1 < patternEnd && ptr[1] == '+')
{
ptr++;
length += 2 + 2*LINK_SIZE; /* Allow for atomic brackets */
}
continue;
/* An alternation contains an offset to the next branch or ket. If any ims
options changed in the previous branch(es), and/or if we are in a
lookbehind assertion, extra space will be needed at the start of the
branch. This is handled by branch_extra. */
case '|':
length += 1 + LINK_SIZE + branch_extra;
continue;
/* A character class uses 33 characters provided that all the character
values are less than 256. Otherwise, it uses a bit map for low valued
characters, and individual items for others. Don't worry about character
types that aren't allowed in classes - they'll get picked up during the
compile. A character class that contains only one single-byte character
uses 2 or 3 bytes, depending on whether it is negated or not. Notice this
where we can. (In UTF-8 mode we can do this only for chars < 128.) */
case '[':
if (++ptr < patternEnd && *ptr == '^')
{
class_optcount = 10; /* Greater than one */
ptr++;
}
else class_optcount = 0;
#ifdef SUPPORT_UTF8
class_utf8 = FALSE;
#endif
/* Written as a "do" so that an initial ']' is taken as data */
if (ptr < patternEnd) do
{
/* Inside \Q...\E everything is literal except \E */
if (inescq)
{
if (*ptr != '\\' || ptr + 1 >= patternEnd || ptr[1] != 'E')
goto GET_ONE_CHARACTER;
inescq = FALSE;
ptr += 1;
continue;
}
/* Outside \Q...\E, check for escapes */
if (*ptr == '\\')
{
c = check_escape(&ptr, patternEnd, &errorcode, bracount, options, TRUE);
if (errorcode != 0) goto PCRE_ERROR_RETURN;
/* \b is backspace inside a class; \X is literal */
if (-c == ESC_b) c = '\b';
else if (-c == ESC_X) c = 'X';
/* \Q enters quoting mode */
else if (-c == ESC_Q)
{
inescq = TRUE;
continue;
}
/* Handle escapes that turn into characters */
if (c >= 0) goto NON_SPECIAL_CHARACTER;
/* Escapes that are meta-things. The normal ones just affect the
bit map, but Unicode properties require an XCLASS extended item. */
else
{
class_optcount = 10; /* \d, \s etc; make sure > 1 */
#ifdef SUPPORT_UTF8
if (-c == ESC_p || -c == ESC_P)
{
if (!class_utf8)
{
class_utf8 = TRUE;
length += LINK_SIZE + 2;
}
length += 2;
}
#endif
}
}
/* Check the syntax for POSIX stuff. The bits we actually handle are
checked during the real compile phase. */
else if (*ptr == '[' && ptr + 2 < patternEnd && check_posix_syntax(ptr, patternEnd, &ptr, &compile_block))
{
ptr++;
class_optcount = 10; /* Make sure > 1 */
}
/* Anything else increments the possible optimization count. We have to
detect ranges here so that we can compute the number of extra ranges for
caseless wide characters when UCP support is available. If there are wide
characters, we are going to have to use an XCLASS, even for single
characters. */
else
{
int d;
GET_ONE_CHARACTER:
#ifdef SUPPORT_UTF8
if (utf8)
{
int extra = 0;
GETCHARLENEND(c, ptr, patternEnd, extra);
ptr += extra;
}
else c = *ptr;
#else
c = *ptr;
#endif
/* Come here from handling \ above when it escapes to a char value */
NON_SPECIAL_CHARACTER:
class_optcount++;
d = -1;
if (ptr + 1 < patternEnd && ptr[1] == '-')
{
pcre_uchar const *hyptr = ptr++;
if (ptr + 1 < patternEnd) {
if (ptr[1] == '\\')
{
ptr++;
d = check_escape(&ptr, patternEnd, &errorcode, bracount, options, TRUE);
if (errorcode != 0) goto PCRE_ERROR_RETURN;
if (-d == ESC_b) d = '\b'; /* backspace */
else if (-d == ESC_X) d = 'X'; /* literal X in a class */
}
else if (ptr[1] != ']')
{
ptr++;
#ifdef SUPPORT_UTF8
if (utf8)
{
int extra = 0;
GETCHARLENEND(d, ptr, patternEnd, extra);
ptr += extra;
}
else
#endif
d = *ptr;
}
}
if (d < 0) ptr = hyptr; /* go back to hyphen as data */
}
/* If d >= 0 we have a range. In UTF-8 mode, if the end is > 255, or >
127 for caseless matching, we will need to use an XCLASS. */
if (d >= 0)
{
class_optcount = 10; /* Ensure > 1 */
if (d < c)
{
errorcode = ERR8;
goto PCRE_ERROR_RETURN;
}
#ifdef SUPPORT_UTF8
if (utf8 && (d > 255 || ((options & PCRE_CASELESS) != 0 && d > 127)))
{
uschar buffer[6];
if (!class_utf8) /* Allow for XCLASS overhead */
{
class_utf8 = TRUE;
length += LINK_SIZE + 2;
}
#ifdef SUPPORT_UCP
/* If we have UCP support, find out how many extra ranges are
needed to map the other case of characters within this range. We
have to mimic the range optimization here, because extending the
range upwards might push d over a boundary that makes is use
another byte in the UTF-8 representation. */
if ((options & PCRE_CASELESS) != 0)
{
int occ, ocd;
int cc = c;
int origd = d;
while (get_othercase_range(&cc, origd, &occ, &ocd))
{
if (occ >= c && ocd <= d) continue; /* Skip embedded */
if (occ < c && ocd >= c - 1) /* Extend the basic range */
{ /* if there is overlap, */
c = occ; /* noting that if occ < c */
continue; /* we can't have ocd > d */
} /* because a subrange is */
if (ocd > d && occ <= d + 1) /* always shorter than */
{ /* the basic range. */
d = ocd;
continue;
}
/* An extra item is needed */
length += 1 + _pcre_ord2utf8(occ, buffer) +
((occ == ocd)? 0 : _pcre_ord2utf8(ocd, buffer));
}
}
#endif /* SUPPORT_UCP */
/* The length of the (possibly extended) range */
length += 1 + _pcre_ord2utf8(c, buffer) + _pcre_ord2utf8(d, buffer);
}
#endif /* SUPPORT_UTF8 */
}
/* We have a single character. There is nothing to be done unless we
are in UTF-8 mode. If the char is > 255, or 127 when caseless, we must
allow for an XCL_SINGLE item, doubled for caselessness if there is UCP
support. */
else
{
#ifdef SUPPORT_UTF8
if (utf8 && (c > 255 || ((options & PCRE_CASELESS) != 0 && c > 127)))
{
uschar buffer[6];
class_optcount = 10; /* Ensure > 1 */
if (!class_utf8) /* Allow for XCLASS overhead */
{
class_utf8 = TRUE;
length += LINK_SIZE + 2;
}
#ifdef SUPPORT_UCP
length += (((options & PCRE_CASELESS) != 0)? 2 : 1) *
(1 + _pcre_ord2utf8(c, buffer));
#else /* SUPPORT_UCP */
length += 1 + _pcre_ord2utf8(c, buffer);
#endif /* SUPPORT_UCP */
}
#endif /* SUPPORT_UTF8 */
}
}
}
while (++ptr < patternEnd && (inescq || *ptr != ']')); /* Concludes "do" above */
if (ptr >= patternEnd) /* Missing terminating ']' */
{
errorcode = ERR6;
goto PCRE_ERROR_RETURN;
}
/* We can optimize when there was only one optimizable character. Repeats
for positive and negated single one-byte chars are handled by the general
code. Here, we handle repeats for the class opcodes. */
if (class_optcount == 1) length += 3; else
{
length += 33;
/* A repeat needs either 1 or 5 bytes. If it is a possessive quantifier,
we also need extra for wrapping the whole thing in a sub-pattern. */
if (ptr + 1 < patternEnd && ptr[1] == '{' && is_counted_repeat(ptr+2, patternEnd))
{
ptr = read_repeat_counts(ptr+2, &min, &max, &errorcode);
if (errorcode != 0) goto PCRE_ERROR_RETURN;
if ((min == 0 && (max == 1 || max == -1)) ||
(min == 1 && max == -1))
length++;
else length += 5;
if (ptr + 1 < patternEnd) {
if (ptr[1] == '+')
{
ptr++;
length += 2 + 2*LINK_SIZE;
}
else if (ptr[1] == '?')
ptr++;
}
}
}
continue;
/* Brackets may be genuine groups or special things */
case '(':
branch_newextra = 0;
bracket_length = 1 + LINK_SIZE;
capturing = FALSE;
/* Handle special forms of bracket, which all start (? */
if (ptr + 1 < patternEnd && ptr[1] == '?')
{
int set, unset;
int *optset;
switch (c = (ptr + 2 < patternEnd ? ptr[2] : 0))
{
/* Skip over comments entirely */
case '#':
ptr += 3;
while (ptr < patternEnd && *ptr != ')')
ptr++;
if (ptr == patternEnd)
{
errorcode = ERR18;
goto PCRE_ERROR_RETURN;
}
continue;
/* Non-referencing groups and lookaheads just move the pointer on, and
then behave like a non-special bracket, except that they don't increment
the count of extracting brackets. Ditto for the "once only" bracket,
which is in Perl from version 5.005. */
case ':':
case '=':
case '!':
case '>':
ptr += 2;
break;
/* (?R) specifies a recursive call to the regex, which is an extension
to provide the facility which can be obtained by (?p{perl-code}) in
Perl 5.6. In Perl 5.8 this has become (??{perl-code}).
From PCRE 4.00, items such as (?3) specify subroutine-like "calls" to
the appropriate numbered brackets. This includes both recursive and
non-recursive calls. (?R) is now synonymous with (?0). */
case 'R':
ptr++;
case '0': case '1': case '2': case '3': case '4':
case '5': case '6': case '7': case '8': case '9':
ptr += 2;
if (c != 'R')
{
++ptr;
while (ptr < patternEnd && (DIGITAB(*ptr) & ctype_digit) != 0)
++ptr;
}
if (ptr >= patternEnd || *ptr != ')')
{
errorcode = ERR29;
goto PCRE_ERROR_RETURN;
}
length += 1 + LINK_SIZE;
/* If this item is quantified, it will get wrapped inside brackets so
as to use the code for quantified brackets. We jump down and use the
code that handles this for real brackets. */
if (ptr + 1 < patternEnd && (ptr[1] == '+' || ptr[1] == '*' || ptr[1] == '?' || ptr[1] == '{'))
{
length += 2 + 2 * LINK_SIZE; /* to make bracketed */
duplength = 5 + 3 * LINK_SIZE;
goto HANDLE_QUANTIFIED_BRACKETS;
}
continue;
/* (?C) is an extension which provides "callout" - to provide a bit of
the functionality of the Perl (?{...}) feature. An optional number may
follow (default is zero). */
case 'C':
ptr += 3;
while (ptr < patternEnd && (DIGITAB(*ptr) & ctype_digit) != 0)
++ptr;
if (ptr >= patternEnd || *ptr != ')')
{
errorcode = ERR39;
goto PCRE_ERROR_RETURN;
}
length += 2 + 2*LINK_SIZE;
continue;
/* Named subpatterns are an extension copied from Python */
case 'P':
ptr += 3;
/* Handle the definition of a named subpattern */
if (ptr < patternEnd) {
if (*ptr == '<')
{
const pcre_uchar *p; /* Don't amalgamate; some compilers */
p = ++ptr; /* grumble at autoincrement in declaration */
while (ptr < patternEnd && (CTYPES(&compile_block, *ptr) & ctype_word) != 0)
ptr++;
if (ptr >= patternEnd || *ptr != '>')
{
errorcode = ERR42;
goto PCRE_ERROR_RETURN;
}
name_count++;
if (ptr - p > max_name_size) max_name_size = INT_CAST(ptr - p);
capturing = TRUE; /* Named parentheses are always capturing */
break;
}
/* Handle back references and recursive calls to named subpatterns */
if (*ptr == '=' || *ptr == '>')
{
++ptr;
while (ptr < patternEnd && (CTYPES(&compile_block, *ptr) & ctype_word) != 0)
++ptr;
if (ptr >= patternEnd || *ptr != ')')
{
errorcode = ERR42;
goto PCRE_ERROR_RETURN;
}
break;
}
}
/* Unknown character after (?P */
errorcode = ERR41;
goto PCRE_ERROR_RETURN;
/* Lookbehinds are in Perl from version 5.005 */
case '<':
ptr += 3;
if (ptr < patternEnd && (*ptr == '=' || *ptr == '!'))
{
branch_newextra = 1 + LINK_SIZE;
length += 1 + LINK_SIZE; /* For the first branch */
break;
}
errorcode = ERR24;
goto PCRE_ERROR_RETURN;
/* Conditionals are in Perl from version 5.005. The bracket must either
be followed by a number (for bracket reference) or by an assertion
group, or (a PCRE extension) by 'R' for a recursion test. */
case '(':
if (ptr + 4 < patternEnd && ptr[3] == 'R' && ptr[4] == ')')
{
ptr += 4;
length += 3;
}
else if (ptr + 3 < patternEnd && (DIGITAB(ptr[3]) & ctype_digit) != 0)
{
ptr += 4;
length += 3;
while (ptr < patternEnd && (DIGITAB(*ptr) & ctype_digit) != 0)
ptr++;
if (ptr >= patternEnd || *ptr != ')')
{
errorcode = ERR26;
goto PCRE_ERROR_RETURN;
}
}
else /* An assertion must follow */
{
ptr++; /* Can treat like ':' as far as spacing is concerned */
if (ptr + 3 >= patternEnd || ptr[2] != '?' ||
(ptr[3] != '=' && ptr[3] != '!' && ptr[3] != '<') )
{
ptr += 2; /* To get right offset in message */
errorcode = ERR28;
goto PCRE_ERROR_RETURN;
}
}
break;
/* Else loop checking valid options until ) is met. Anything else is an
error. If we are without any brackets, i.e. at top level, the settings
act as if specified in the options, so massage the options immediately.
This is for backward compatibility with Perl 5.004. */
default:
set = unset = 0;
optset = &set;
ptr += 2;
for (;; ptr++)
{
c = ptr < patternEnd ? *ptr : 0;
switch (c)
{
case 'i':
*optset |= PCRE_CASELESS;
continue;
case 'm':
*optset |= PCRE_MULTILINE;
continue;
case 's':
*optset |= PCRE_DOTALL;
continue;
case 'x':
*optset |= PCRE_EXTENDED;
continue;
case 'X':
*optset |= PCRE_EXTRA;
continue;
case 'U':
*optset |= PCRE_UNGREEDY;
continue;
case '-':
optset = &unset;
continue;
/* A termination by ')' indicates an options-setting-only item; if
this is at the very start of the pattern (indicated by item_count
being zero), we use it to set the global options. This is helpful
when analyzing the pattern for first characters, etc. Otherwise
nothing is done here and it is handled during the compiling
process.
We allow for more than one options setting at the start. If such
settings do not change the existing options, nothing is compiled.
However, we must leave space just in case something is compiled.
This can happen for pathological sequences such as (?i)(?-i)
because the global options will end up with -i set. The space is
small and not significant. (Before I did this there was a reported
bug with (?i)(?-i) in a machine-generated pattern.)
[Historical note: Up to Perl 5.8, options settings at top level
were always global settings, wherever they appeared in the pattern.
That is, they were equivalent to an external setting. From 5.8
onwards, they apply only to what follows (which is what you might
expect).] */
case ')':
if (item_count == 0)
{
options = (options | set) & (~unset);
set = unset = 0; /* To save length */
item_count--; /* To allow for several */
length += 2;
}
/* Fall through */
/* A termination by ':' indicates the start of a nested group with
the given options set. This is again handled at compile time, but
we must allow for compiled space if any of the ims options are
set. We also have to allow for resetting space at the end of
the group, which is why 4 is added to the length and not just 2.
If there are several changes of options within the same group, this
will lead to an over-estimate on the length, but this shouldn't
matter very much. We also have to allow for resetting options at
the start of any alternations, which we do by setting
branch_newextra to 2. Finally, we record whether the case-dependent
flag ever changes within the regex. This is used by the "required
character" code. */
case ':':
if (((set|unset) & PCRE_IMS) != 0)
{
length += 4;
branch_newextra = 2;
if (((set|unset) & PCRE_CASELESS) != 0) options |= PCRE_ICHANGED;
}
goto END_OPTIONS;
/* Unrecognized option character */
default:
errorcode = ERR12;
goto PCRE_ERROR_RETURN;
}
}
/* If we hit a closing bracket, that's it - this is a freestanding
option-setting. We need to ensure that branch_extra is updated if
necessary. The only values branch_newextra can have here are 0 or 2.
If the value is 2, then branch_extra must either be 2 or 5, depending
on whether this is a lookbehind group or not. */
END_OPTIONS:
if (c == ')')
{
if (branch_newextra == 2 &&
(branch_extra == 0 || branch_extra == 1+LINK_SIZE))
branch_extra += branch_newextra;
continue;
}
/* If options were terminated by ':' control comes here. This is a
non-capturing group with an options change. There is nothing more that
needs to be done because "capturing" is already set FALSE by default;
we can just fall through. */
}
}
/* Ordinary parentheses, not followed by '?', are capturing unless
PCRE_NO_AUTO_CAPTURE is set. */
else capturing = (options & PCRE_NO_AUTO_CAPTURE) == 0;
/* Capturing brackets must be counted so we can process escapes in a
Perlish way. If the number exceeds EXTRACT_BASIC_MAX we are going to need
an additional 3 bytes of memory per capturing bracket. */
if (capturing)
{
bracount++;
if (bracount > EXTRACT_BASIC_MAX) bracket_length += 3;
}
/* Save length for computing whole length at end if there's a repeat that
requires duplication of the group. Also save the current value of
branch_extra, and start the new group with the new value. If non-zero, this
will either be 2 for a (?imsx: group, or 3 for a lookbehind assertion. */
if (brastackptr >= sizeof(brastack)/sizeof(int))
{
errorcode = ERR19;
goto PCRE_ERROR_RETURN;
}
bralenstack[brastackptr] = branch_extra;
branch_extra = branch_newextra;
brastack[brastackptr++] = length;
length += bracket_length;
continue;
/* Handle ket. Look for subsequent max/min; for certain sets of values we
have to replicate this bracket up to that many times. If brastackptr is
0 this is an unmatched bracket which will generate an error, but take care
not to try to access brastack[-1] when computing the length and restoring
the branch_extra value. */
case ')':
length += 1 + LINK_SIZE;
if (brastackptr > 0)
{
duplength = length - brastack[--brastackptr];
branch_extra = bralenstack[brastackptr];
}
else duplength = 0;
/* The following code is also used when a recursion such as (?3) is
followed by a quantifier, because in that case, it has to be wrapped inside
brackets so that the quantifier works. The value of duplength must be
set before arrival. */
HANDLE_QUANTIFIED_BRACKETS:
/* Leave ptr at the final char; for read_repeat_counts this happens
automatically; for the others we need an increment. */
if (ptr + 1 < patternEnd && (c = ptr[1]) == '{' && is_counted_repeat(ptr+2, patternEnd))
{
ptr = read_repeat_counts(ptr+2, &min, &max, &errorcode);
if (errorcode != 0) goto PCRE_ERROR_RETURN;
}
else if (c == '*') { min = 0; max = -1; ptr++; }
else if (c == '+') { min = 1; max = -1; ptr++; }
else if (c == '?') { min = 0; max = 1; ptr++; }
else { min = 1; max = 1; }
/* If the minimum is zero, we have to allow for an OP_BRAZERO before the
group, and if the maximum is greater than zero, we have to replicate
maxval-1 times; each replication acquires an OP_BRAZERO plus a nesting
bracket set. */
if (min == 0)
{
length++;
if (max > 0) length += (max - 1) * (duplength + 3 + 2*LINK_SIZE);
}
/* When the minimum is greater than zero, we have to replicate up to
minval-1 times, with no additions required in the copies. Then, if there
is a limited maximum we have to replicate up to maxval-1 times allowing
for a BRAZERO item before each optional copy and nesting brackets for all
but one of the optional copies. */
else
{
length += (min - 1) * duplength;
if (max > min) /* Need this test as max=-1 means no limit */
length += (max - min) * (duplength + 3 + 2*LINK_SIZE)
- (2 + 2*LINK_SIZE);
}
/* Allow space for once brackets for "possessive quantifier" */
if (ptr + 1 < patternEnd && ptr[1] == '+')
{
ptr++;
length += 2 + 2*LINK_SIZE;
}
continue;
/* Non-special character. It won't be space or # in extended mode, so it is
always a genuine character. If we are in a \Q...\E sequence, check for the
end; if not, we have a literal. */
default:
NORMAL_CHAR:
if (inescq && c == '\\' && ptr + 1 < patternEnd && ptr[1] == 'E')
{
inescq = FALSE;
ptr++;
continue;
}
length += 2; /* For a one-byte character */
lastitemlength = 1; /* Default length of last item for repeats */
/* In UTF-8 mode, check for additional bytes. */
#if PCRE_UTF16
if (c > 127)
{
if (IS_LEADING_SURROGATE(c))
{
c = DECODE_SURROGATE_PAIR(c, ptr < patternEnd ? *ptr : 0);
++ptr;
}
{
int i;
for (i = 0; i < _pcre_utf8_table1_size; i++)
if (c <= _pcre_utf8_table1[i]) break;
length += i;
lastitemlength += i;
}
}
#else
#ifdef SUPPORT_UTF8
if (utf8 && (c & 0xc0) == 0xc0)
{
while (ptr + 1 < patternEnd && (ptr[1] & 0xc0) == 0x80) /* Can't flow over the end */
{ /* because the end is marked */
lastitemlength++; /* by a zero byte. */
length++;
ptr++;
}
}
#endif
#endif
continue;
}
}
length += 2 + LINK_SIZE; /* For final KET and END */
if ((options & PCRE_AUTO_CALLOUT) != 0)
length += 2 + 2*LINK_SIZE; /* For final callout */
if (length > MAX_PATTERN_SIZE)
{
errorcode = ERR20;
goto PCRE_EARLY_ERROR_RETURN;
}
/* Compute the size of data block needed and get it, either from malloc or
externally provided function. */
size = length + sizeof(real_pcre) + name_count * (max_name_size + 3);
re = (real_pcre *)(pcre_malloc)(size);
if (re == NULL)
{
errorcode = ERR21;
goto PCRE_EARLY_ERROR_RETURN;
}
/* Put in the magic number, and save the sizes, options, and character table
pointer. NULL is used for the default character tables. The nullpad field is at
the end; it's there to help in the case when a regex compiled on a system with
4-byte pointers is run on another with 8-byte pointers. */
re->magic_number = (pcre_uint32)MAGIC_NUMBER;
re->size = (pcre_uint32)size;
re->options = options;
re->dummy1 = 0;
re->name_table_offset = sizeof(real_pcre);
re->name_entry_size = max_name_size + 3;
re->name_count = name_count;
re->ref_count = 0;
re->tables = (tables == _pcre_default_tables)? NULL : tables;
re->nullpad = NULL;
/* The starting points of the name/number translation table and of the code are
passed around in the compile data block. */
compile_block.names_found = 0;
compile_block.name_entry_size = max_name_size + 3;
compile_block.name_table = (uschar *)re + re->name_table_offset;
codestart = compile_block.name_table + re->name_entry_size * re->name_count;
compile_block.start_code = codestart;
compile_block.start_pattern = (const pcre_uchar *)pattern;
compile_block.req_varyopt = 0;
compile_block.nopartial = FALSE;
/* Set up a starting, non-extracting bracket, then compile the expression. On
error, errorcode will be set non-zero, so we don't need to look at the result
of the function here. */
ptr = (const pcre_uchar *)pattern;
code = (uschar *)codestart;
*code = OP_BRA;
bracount = 0;
(void)compile_regex(options, options & PCRE_IMS, &bracount, &code, &ptr, patternEnd,
&errorcode, FALSE, 0, &firstbyte, &reqbyte, NULL, &compile_block);
re->top_bracket = bracount;
re->top_backref = compile_block.top_backref;
if (compile_block.nopartial) re->options |= PCRE_NOPARTIAL;
/* If not reached end of pattern on success, there's an excess bracket. */
if (errorcode == 0 && ptr < patternEnd) errorcode = ERR22;
/* Fill in the terminating state and check for disastrous overflow, but
if debugging, leave the test till after things are printed out. */
*code++ = OP_END;
#ifndef DEBUG
if (code - codestart > length) errorcode = ERR23;
#endif
/* Give an error if there's back reference to a non-existent capturing
subpattern. */
if (re->top_backref > re->top_bracket) errorcode = ERR15;
/* Failed to compile, or error while post-processing */
if (errorcode != 0)
{
(pcre_free)(re);
PCRE_ERROR_RETURN:
*erroroffset = INT_CAST(ptr - (const pcre_uchar *)pattern);
PCRE_EARLY_ERROR_RETURN:
*errorptr = error_texts[errorcode];
if (errorcodeptr != NULL) *errorcodeptr = errorcode;
return NULL;
}
/* If the anchored option was not passed, set the flag if we can determine that
the pattern is anchored by virtue of ^ characters or \A or anything else (such
as starting with .* when DOTALL is set).
Otherwise, if we know what the first character has to be, save it, because that
speeds up unanchored matches no end. If not, see if we can set the
PCRE_STARTLINE flag. This is helpful for multiline matches when all branches
start with ^. and also when all branches start with .* for non-DOTALL matches.
*/
if ((options & PCRE_ANCHORED) == 0)
{
int temp_options = options;
if (is_anchored(codestart, &temp_options, 0, compile_block.backref_map))
re->options |= PCRE_ANCHORED;
else
{
if (firstbyte < 0)
firstbyte = find_firstassertedchar(codestart, &temp_options, FALSE);
if (firstbyte >= 0) /* Remove caseless flag for non-caseable chars */
{
int ch = firstbyte & 255;
#if PCRE_UTF16
if (ch < 127)
#endif
{
re->first_byte = ((firstbyte & REQ_CASELESS) != 0 &&
compile_block.fcc[ch] == ch)? ch : firstbyte;
re->options |= PCRE_FIRSTSET;
}
}
else if (is_startline(codestart, 0, compile_block.backref_map))
re->options |= PCRE_STARTLINE;
}
}
/* For an anchored pattern, we use the "required byte" only if it follows a
variable length item in the regex. Remove the caseless flag for non-caseable
bytes. */
if (reqbyte >= 0 &&
((re->options & PCRE_ANCHORED) == 0 || (reqbyte & REQ_VARY) != 0))
{
int ch = reqbyte & 255;
#if PCRE_UTF16
if (ch < 127)
#endif
{
re->req_byte = ((reqbyte & REQ_CASELESS) != 0 &&
compile_block.fcc[ch] == ch)? (reqbyte & ~REQ_CASELESS) : reqbyte;
re->options |= PCRE_REQCHSET;
}
}
/* Print out the compiled data if debugging is enabled. This is never the
case when building a production library. */
#ifdef DEBUG
printf("Length = %d top_bracket = %d top_backref = %d\n",
length, re->top_bracket, re->top_backref);
if (re->options != 0)
{
printf("%s%s%s%s%s%s%s%s%s%s\n",
((re->options & PCRE_NOPARTIAL) != 0)? "nopartial " : "",
((re->options & PCRE_ANCHORED) != 0)? "anchored " : "",
((re->options & PCRE_CASELESS) != 0)? "caseless " : "",
((re->options & PCRE_ICHANGED) != 0)? "case state changed " : "",
((re->options & PCRE_EXTENDED) != 0)? "extended " : "",
((re->options & PCRE_MULTILINE) != 0)? "multiline " : "",
((re->options & PCRE_DOTALL) != 0)? "dotall " : "",
((re->options & PCRE_DOLLAR_ENDONLY) != 0)? "endonly " : "",
((re->options & PCRE_EXTRA) != 0)? "extra " : "",
((re->options & PCRE_UNGREEDY) != 0)? "ungreedy " : "");
}
if ((re->options & PCRE_FIRSTSET) != 0)
{
int ch = re->first_byte & 255;
const char *caseless = ((re->first_byte & REQ_CASELESS) == 0)? "" : " (caseless)";
if (isprint(ch)) printf("First char = %c%s\n", ch, caseless);
else printf("First char = \\x%02x%s\n", ch, caseless);
}
if ((re->options & PCRE_REQCHSET) != 0)
{
int ch = re->req_byte & 255;
const char *caseless = ((re->req_byte & REQ_CASELESS) == 0)? "" : " (caseless)";
if (isprint(ch)) printf("Req char = %c%s\n", ch, caseless);
else printf("Req char = \\x%02x%s\n", ch, caseless);
}
pcre_printint(re, stdout);
/* This check is done here in the debugging case so that the code that
was compiled can be seen. */
if (code - codestart > length)
{
(pcre_free)(re);
*errorptr = error_texts[ERR23];
*erroroffset = ptr - (pcre_uchar *)pattern;
if (errorcodeptr != NULL) *errorcodeptr = ERR23;
return NULL;
}
#endif
return (pcre *)re;
}
/* End of pcre_compile.c */