| // © 2016 and later: Unicode, Inc. and others. |
| // License & terms of use: http://www.unicode.org/copyright.html |
| /* |
| ********************************************************************** |
| * Copyright (C) 2004-2016, International Business Machines |
| * Corporation and others. All Rights Reserved. |
| ********************************************************************** |
| * file name: uregex.h |
| * encoding: UTF-8 |
| * indentation:4 |
| * |
| * created on: 2004mar09 |
| * created by: Andy Heninger |
| * |
| * ICU Regular Expressions, API for C |
| */ |
| |
| /** |
| * \file |
| * \brief C API: Regular Expressions |
| * |
| * <p>This is a C wrapper around the C++ RegexPattern and RegexMatcher classes.</p> |
| */ |
| |
| #ifndef UREGEX_H |
| #define UREGEX_H |
| |
| #include "unicode/utext.h" |
| #include "unicode/utypes.h" |
| |
| #if !UCONFIG_NO_REGULAR_EXPRESSIONS |
| |
| #include "unicode/localpointer.h" |
| #include "unicode/parseerr.h" |
| |
| struct URegularExpression; |
| /** |
| * Structure representing a compiled regular expression, plus the results |
| * of a match operation. |
| * @stable ICU 3.0 |
| */ |
| typedef struct URegularExpression URegularExpression; |
| |
| |
| /** |
| * Constants for Regular Expression Match Modes. |
| * @stable ICU 2.4 |
| */ |
| typedef enum URegexpFlag{ |
| |
| #ifndef U_HIDE_DRAFT_API |
| /** Forces normalization of pattern and strings. |
| Not implemented yet, just a placeholder, hence draft. |
| @draft ICU 2.4 */ |
| UREGEX_CANON_EQ = 128, |
| #endif /* U_HIDE_DRAFT_API */ |
| /** Enable case insensitive matching. @stable ICU 2.4 */ |
| UREGEX_CASE_INSENSITIVE = 2, |
| |
| /** Allow white space and comments within patterns @stable ICU 2.4 */ |
| UREGEX_COMMENTS = 4, |
| |
| /** If set, '.' matches line terminators, otherwise '.' matching stops at line end. |
| * @stable ICU 2.4 */ |
| UREGEX_DOTALL = 32, |
| |
| /** If set, treat the entire pattern as a literal string. |
| * Metacharacters or escape sequences in the input sequence will be given |
| * no special meaning. |
| * |
| * The flag UREGEX_CASE_INSENSITIVE retains its impact |
| * on matching when used in conjunction with this flag. |
| * The other flags become superfluous. |
| * |
| * @stable ICU 4.0 |
| */ |
| UREGEX_LITERAL = 16, |
| |
| /** Control behavior of "$" and "^" |
| * If set, recognize line terminators within string, |
| * otherwise, match only at start and end of input string. |
| * @stable ICU 2.4 */ |
| UREGEX_MULTILINE = 8, |
| |
| /** Unix-only line endings. |
| * When this mode is enabled, only \\u000a is recognized as a line ending |
| * in the behavior of ., ^, and $. |
| * @stable ICU 4.0 |
| */ |
| UREGEX_UNIX_LINES = 1, |
| |
| /** Unicode word boundaries. |
| * If set, \b uses the Unicode TR 29 definition of word boundaries. |
| * Warning: Unicode word boundaries are quite different from |
| * traditional regular expression word boundaries. See |
| * http://unicode.org/reports/tr29/#Word_Boundaries |
| * @stable ICU 2.8 |
| */ |
| UREGEX_UWORD = 256, |
| |
| /** Error on Unrecognized backslash escapes. |
| * If set, fail with an error on patterns that contain |
| * backslash-escaped ASCII letters without a known special |
| * meaning. If this flag is not set, these |
| * escaped letters represent themselves. |
| * @stable ICU 4.0 |
| */ |
| UREGEX_ERROR_ON_UNKNOWN_ESCAPES = 512 |
| |
| } URegexpFlag; |
| |
| /** |
| * Open (compile) an ICU regular expression. Compiles the regular expression in |
| * string form into an internal representation using the specified match mode flags. |
| * The resulting regular expression handle can then be used to perform various |
| * matching operations. |
| * |
| * |
| * @param pattern The Regular Expression pattern to be compiled. |
| * @param patternLength The length of the pattern, or -1 if the pattern is |
| * NUL terminated. |
| * @param flags Flags that alter the default matching behavior for |
| * the regular expression, UREGEX_CASE_INSENSITIVE, for |
| * example. For default behavior, set this parameter to zero. |
| * See <code>enum URegexpFlag</code>. All desired flags |
| * are bitwise-ORed together. |
| * @param pe Receives the position (line and column numbers) of any syntax |
| * error within the source regular expression string. If this |
| * information is not wanted, pass NULL for this parameter. |
| * @param status Receives error detected by this function. |
| * @stable ICU 3.0 |
| * |
| */ |
| U_STABLE URegularExpression * U_EXPORT2 |
| uregex_open( const UChar *pattern, |
| int32_t patternLength, |
| uint32_t flags, |
| UParseError *pe, |
| UErrorCode *status); |
| |
| /** |
| * Open (compile) an ICU regular expression. Compiles the regular expression in |
| * string form into an internal representation using the specified match mode flags. |
| * The resulting regular expression handle can then be used to perform various |
| * matching operations. |
| * <p> |
| * The contents of the pattern UText will be extracted and saved. Ownership of the |
| * UText struct itself remains with the caller. This is to match the behavior of |
| * uregex_open(). |
| * |
| * @param pattern The Regular Expression pattern to be compiled. |
| * @param flags Flags that alter the default matching behavior for |
| * the regular expression, UREGEX_CASE_INSENSITIVE, for |
| * example. For default behavior, set this parameter to zero. |
| * See <code>enum URegexpFlag</code>. All desired flags |
| * are bitwise-ORed together. |
| * @param pe Receives the position (line and column numbers) of any syntax |
| * error within the source regular expression string. If this |
| * information is not wanted, pass NULL for this parameter. |
| * @param status Receives error detected by this function. |
| * |
| * @stable ICU 4.6 |
| */ |
| U_STABLE URegularExpression * U_EXPORT2 |
| uregex_openUText(UText *pattern, |
| uint32_t flags, |
| UParseError *pe, |
| UErrorCode *status); |
| |
| #if !UCONFIG_NO_CONVERSION |
| /** |
| * Open (compile) an ICU regular expression. The resulting regular expression |
| * handle can then be used to perform various matching operations. |
| * <p> |
| * This function is the same as uregex_open, except that the pattern |
| * is supplied as an 8 bit char * string in the default code page. |
| * |
| * @param pattern The Regular Expression pattern to be compiled, |
| * NUL terminated. |
| * @param flags Flags that alter the default matching behavior for |
| * the regular expression, UREGEX_CASE_INSENSITIVE, for |
| * example. For default behavior, set this parameter to zero. |
| * See <code>enum URegexpFlag</code>. All desired flags |
| * are bitwise-ORed together. |
| * @param pe Receives the position (line and column numbers) of any syntax |
| * error within the source regular expression string. If this |
| * information is not wanted, pass NULL for this parameter. |
| * @param status Receives errors detected by this function. |
| * @return The URegularExpression object representing the compiled |
| * pattern. |
| * |
| * @stable ICU 3.0 |
| */ |
| U_STABLE URegularExpression * U_EXPORT2 |
| uregex_openC( const char *pattern, |
| uint32_t flags, |
| UParseError *pe, |
| UErrorCode *status); |
| #endif |
| |
| |
| |
| /** |
| * Close the regular expression, recovering all resources (memory) it |
| * was holding. |
| * |
| * @param regexp The regular expression to be closed. |
| * @stable ICU 3.0 |
| */ |
| U_STABLE void U_EXPORT2 |
| uregex_close(URegularExpression *regexp); |
| |
| #if U_SHOW_CPLUSPLUS_API |
| |
| U_NAMESPACE_BEGIN |
| |
| /** |
| * \class LocalURegularExpressionPointer |
| * "Smart pointer" class, closes a URegularExpression via uregex_close(). |
| * For most methods see the LocalPointerBase base class. |
| * |
| * @see LocalPointerBase |
| * @see LocalPointer |
| * @stable ICU 4.4 |
| */ |
| U_DEFINE_LOCAL_OPEN_POINTER(LocalURegularExpressionPointer, URegularExpression, uregex_close); |
| |
| U_NAMESPACE_END |
| |
| #endif |
| |
| /** |
| * Make a copy of a compiled regular expression. Cloning a regular |
| * expression is faster than opening a second instance from the source |
| * form of the expression, and requires less memory. |
| * <p> |
| * Note that the current input string and the position of any matched text |
| * within it are not cloned; only the pattern itself and the |
| * match mode flags are copied. |
| * <p> |
| * Cloning can be particularly useful to threaded applications that perform |
| * multiple match operations in parallel. Each concurrent RE |
| * operation requires its own instance of a URegularExpression. |
| * |
| * @param regexp The compiled regular expression to be cloned. |
| * @param status Receives indication of any errors encountered |
| * @return the cloned copy of the compiled regular expression. |
| * @stable ICU 3.0 |
| */ |
| U_STABLE URegularExpression * U_EXPORT2 |
| uregex_clone(const URegularExpression *regexp, UErrorCode *status); |
| |
| /** |
| * Returns a pointer to the source form of the pattern for this regular expression. |
| * This function will work even if the pattern was originally specified as a UText. |
| * |
| * @param regexp The compiled regular expression. |
| * @param patLength This output parameter will be set to the length of the |
| * pattern string. A NULL pointer may be used here if the |
| * pattern length is not needed, as would be the case if |
| * the pattern is known in advance to be a NUL terminated |
| * string. |
| * @param status Receives errors detected by this function. |
| * @return a pointer to the pattern string. The storage for the string is |
| * owned by the regular expression object, and must not be |
| * altered or deleted by the application. The returned string |
| * will remain valid until the regular expression is closed. |
| * @stable ICU 3.0 |
| */ |
| U_STABLE const UChar * U_EXPORT2 |
| uregex_pattern(const URegularExpression *regexp, |
| int32_t *patLength, |
| UErrorCode *status); |
| |
| /** |
| * Returns the source text of the pattern for this regular expression. |
| * This function will work even if the pattern was originally specified as a UChar string. |
| * |
| * @param regexp The compiled regular expression. |
| * @param status Receives errors detected by this function. |
| * @return the pattern text. The storage for the text is owned by the regular expression |
| * object, and must not be altered or deleted. |
| * |
| * @stable ICU 4.6 |
| */ |
| U_STABLE UText * U_EXPORT2 |
| uregex_patternUText(const URegularExpression *regexp, |
| UErrorCode *status); |
| |
| /** |
| * Get the match mode flags that were specified when compiling this regular expression. |
| * @param status Receives errors detected by this function. |
| * @param regexp The compiled regular expression. |
| * @return The match mode flags |
| * @see URegexpFlag |
| * @stable ICU 3.0 |
| */ |
| U_STABLE int32_t U_EXPORT2 |
| uregex_flags(const URegularExpression *regexp, |
| UErrorCode *status); |
| |
| |
| /** |
| * Set the subject text string upon which the regular expression will look for matches. |
| * This function may be called any number of times, allowing the regular |
| * expression pattern to be applied to different strings. |
| * <p> |
| * Regular expression matching operations work directly on the application's |
| * string data. No copy is made. The subject string data must not be |
| * altered after calling this function until after all regular expression |
| * operations involving this string data are completed. |
| * <p> |
| * Zero length strings are permitted. In this case, no subsequent match |
| * operation will dereference the text string pointer. |
| * |
| * @param regexp The compiled regular expression. |
| * @param text The subject text string. |
| * @param textLength The length of the subject text, or -1 if the string |
| * is NUL terminated. |
| * @param status Receives errors detected by this function. |
| * @stable ICU 3.0 |
| */ |
| U_STABLE void U_EXPORT2 |
| uregex_setText(URegularExpression *regexp, |
| const UChar *text, |
| int32_t textLength, |
| UErrorCode *status); |
| |
| |
| /** |
| * Set the subject text string upon which the regular expression will look for matches. |
| * This function may be called any number of times, allowing the regular |
| * expression pattern to be applied to different strings. |
| * <p> |
| * Regular expression matching operations work directly on the application's |
| * string data; only a shallow clone is made. The subject string data must not be |
| * altered after calling this function until after all regular expression |
| * operations involving this string data are completed. |
| * |
| * @param regexp The compiled regular expression. |
| * @param text The subject text string. |
| * @param status Receives errors detected by this function. |
| * |
| * @stable ICU 4.6 |
| */ |
| U_STABLE void U_EXPORT2 |
| uregex_setUText(URegularExpression *regexp, |
| UText *text, |
| UErrorCode *status); |
| |
| /** |
| * Get the subject text that is currently associated with this |
| * regular expression object. If the input was supplied using uregex_setText(), |
| * that pointer will be returned. Otherwise, the characters in the input will |
| * be extracted to a buffer and returned. In either case, ownership remains |
| * with the regular expression object. |
| * |
| * This function will work even if the input was originally specified as a UText. |
| * |
| * @param regexp The compiled regular expression. |
| * @param textLength The length of the string is returned in this output parameter. |
| * A NULL pointer may be used here if the |
| * text length is not needed, as would be the case if |
| * the text is known in advance to be a NUL terminated |
| * string. |
| * @param status Receives errors detected by this function. |
| * @return Pointer to the subject text string currently associated with |
| * this regular expression. |
| * @stable ICU 3.0 |
| */ |
| U_STABLE const UChar * U_EXPORT2 |
| uregex_getText(URegularExpression *regexp, |
| int32_t *textLength, |
| UErrorCode *status); |
| |
| /** |
| * Get the subject text that is currently associated with this |
| * regular expression object. |
| * |
| * This function will work even if the input was originally specified as a UChar string. |
| * |
| * @param regexp The compiled regular expression. |
| * @param dest A mutable UText in which to store the current input. |
| * If NULL, a new UText will be created as an immutable shallow clone |
| * of the actual input string. |
| * @param status Receives errors detected by this function. |
| * @return The subject text currently associated with this regular expression. |
| * If a pre-allocated UText was provided, it will always be used and returned. |
| * |
| * @stable ICU 4.6 |
| */ |
| U_STABLE UText * U_EXPORT2 |
| uregex_getUText(URegularExpression *regexp, |
| UText *dest, |
| UErrorCode *status); |
| |
| /** |
| * Set the subject text string upon which the regular expression is looking for matches |
| * without changing any other aspect of the matching state. |
| * The new and previous text strings must have the same content. |
| * |
| * This function is intended for use in environments where ICU is operating on |
| * strings that may move around in memory. It provides a mechanism for notifying |
| * ICU that the string has been relocated, and providing a new UText to access the |
| * string in its new position. |
| * |
| * Note that the regular expression implementation never copies the underlying text |
| * of a string being matched, but always operates directly on the original text |
| * provided by the user. Refreshing simply drops the references to the old text |
| * and replaces them with references to the new. |
| * |
| * Caution: this function is normally used only by very specialized |
| * system-level code. One example use case is with garbage collection |
| * that moves the text in memory. |
| * |
| * @param regexp The compiled regular expression. |
| * @param text The new (moved) text string. |
| * @param status Receives errors detected by this function. |
| * |
| * @stable ICU 4.8 |
| */ |
| U_STABLE void U_EXPORT2 |
| uregex_refreshUText(URegularExpression *regexp, |
| UText *text, |
| UErrorCode *status); |
| |
| /** |
| * Attempts to match the input string against the pattern. |
| * To succeed, the match must extend to the end of the string, |
| * or cover the complete match region. |
| * |
| * If startIndex >= zero the match operation starts at the specified |
| * index and must extend to the end of the input string. Any region |
| * that has been specified is reset. |
| * |
| * If startIndex == -1 the match must cover the input region, or the entire |
| * input string if no region has been set. This directly corresponds to |
| * Matcher.matches() in Java |
| * |
| * @param regexp The compiled regular expression. |
| * @param startIndex The input string (native) index at which to begin matching, or -1 |
| * to match the input Region. |
| * @param status Receives errors detected by this function. |
| * @return TRUE if there is a match |
| * @stable ICU 3.0 |
| */ |
| U_STABLE UBool U_EXPORT2 |
| uregex_matches(URegularExpression *regexp, |
| int32_t startIndex, |
| UErrorCode *status); |
| |
| /** |
| * 64bit version of uregex_matches. |
| * Attempts to match the input string against the pattern. |
| * To succeed, the match must extend to the end of the string, |
| * or cover the complete match region. |
| * |
| * If startIndex >= zero the match operation starts at the specified |
| * index and must extend to the end of the input string. Any region |
| * that has been specified is reset. |
| * |
| * If startIndex == -1 the match must cover the input region, or the entire |
| * input string if no region has been set. This directly corresponds to |
| * Matcher.matches() in Java |
| * |
| * @param regexp The compiled regular expression. |
| * @param startIndex The input string (native) index at which to begin matching, or -1 |
| * to match the input Region. |
| * @param status Receives errors detected by this function. |
| * @return TRUE if there is a match |
| * @stable ICU 4.6 |
| */ |
| U_STABLE UBool U_EXPORT2 |
| uregex_matches64(URegularExpression *regexp, |
| int64_t startIndex, |
| UErrorCode *status); |
| |
| /** |
| * Attempts to match the input string, starting from the specified index, against the pattern. |
| * The match may be of any length, and is not required to extend to the end |
| * of the input string. Contrast with uregex_matches(). |
| * |
| * <p>If startIndex is >= 0 any input region that was set for this |
| * URegularExpression is reset before the operation begins. |
| * |
| * <p>If the specified starting index == -1 the match begins at the start of the input |
| * region, or at the start of the full string if no region has been specified. |
| * This corresponds directly with Matcher.lookingAt() in Java. |
| * |
| * <p>If the match succeeds then more information can be obtained via the |
| * <code>uregexp_start()</code>, <code>uregexp_end()</code>, |
| * and <code>uregex_group()</code> functions.</p> |
| * |
| * @param regexp The compiled regular expression. |
| * @param startIndex The input string (native) index at which to begin matching, or |
| * -1 to match the Input Region |
| * @param status A reference to a UErrorCode to receive any errors. |
| * @return TRUE if there is a match. |
| * @stable ICU 3.0 |
| */ |
| U_STABLE UBool U_EXPORT2 |
| uregex_lookingAt(URegularExpression *regexp, |
| int32_t startIndex, |
| UErrorCode *status); |
| |
| /** |
| * 64bit version of uregex_lookingAt. |
| * Attempts to match the input string, starting from the specified index, against the pattern. |
| * The match may be of any length, and is not required to extend to the end |
| * of the input string. Contrast with uregex_matches(). |
| * |
| * <p>If startIndex is >= 0 any input region that was set for this |
| * URegularExpression is reset before the operation begins. |
| * |
| * <p>If the specified starting index == -1 the match begins at the start of the input |
| * region, or at the start of the full string if no region has been specified. |
| * This corresponds directly with Matcher.lookingAt() in Java. |
| * |
| * <p>If the match succeeds then more information can be obtained via the |
| * <code>uregexp_start()</code>, <code>uregexp_end()</code>, |
| * and <code>uregex_group()</code> functions.</p> |
| * |
| * @param regexp The compiled regular expression. |
| * @param startIndex The input string (native) index at which to begin matching, or |
| * -1 to match the Input Region |
| * @param status A reference to a UErrorCode to receive any errors. |
| * @return TRUE if there is a match. |
| * @stable ICU 4.6 |
| */ |
| U_STABLE UBool U_EXPORT2 |
| uregex_lookingAt64(URegularExpression *regexp, |
| int64_t startIndex, |
| UErrorCode *status); |
| |
| /** |
| * Find the first matching substring of the input string that matches the pattern. |
| * If startIndex is >= zero the search for a match begins at the specified index, |
| * and any match region is reset. This corresponds directly with |
| * Matcher.find(startIndex) in Java. |
| * |
| * If startIndex == -1 the search begins at the start of the input region, |
| * or at the start of the full string if no region has been specified. |
| * |
| * If a match is found, <code>uregex_start(), uregex_end()</code>, and |
| * <code>uregex_group()</code> will provide more information regarding the match. |
| * |
| * @param regexp The compiled regular expression. |
| * @param startIndex The position (native) in the input string to begin the search, or |
| * -1 to search within the Input Region. |
| * @param status A reference to a UErrorCode to receive any errors. |
| * @return TRUE if a match is found. |
| * @stable ICU 3.0 |
| */ |
| U_STABLE UBool U_EXPORT2 |
| uregex_find(URegularExpression *regexp, |
| int32_t startIndex, |
| UErrorCode *status); |
| |
| /** |
| * 64bit version of uregex_find. |
| * Find the first matching substring of the input string that matches the pattern. |
| * If startIndex is >= zero the search for a match begins at the specified index, |
| * and any match region is reset. This corresponds directly with |
| * Matcher.find(startIndex) in Java. |
| * |
| * If startIndex == -1 the search begins at the start of the input region, |
| * or at the start of the full string if no region has been specified. |
| * |
| * If a match is found, <code>uregex_start(), uregex_end()</code>, and |
| * <code>uregex_group()</code> will provide more information regarding the match. |
| * |
| * @param regexp The compiled regular expression. |
| * @param startIndex The position (native) in the input string to begin the search, or |
| * -1 to search within the Input Region. |
| * @param status A reference to a UErrorCode to receive any errors. |
| * @return TRUE if a match is found. |
| * @stable ICU 4.6 |
| */ |
| U_STABLE UBool U_EXPORT2 |
| uregex_find64(URegularExpression *regexp, |
| int64_t startIndex, |
| UErrorCode *status); |
| |
| /** |
| * Find the next pattern match in the input string. Begin searching |
| * the input at the location following the end of he previous match, |
| * or at the start of the string (or region) if there is no |
| * previous match. If a match is found, <code>uregex_start(), uregex_end()</code>, and |
| * <code>uregex_group()</code> will provide more information regarding the match. |
| * |
| * @param regexp The compiled regular expression. |
| * @param status A reference to a UErrorCode to receive any errors. |
| * @return TRUE if a match is found. |
| * @see uregex_reset |
| * @stable ICU 3.0 |
| */ |
| U_STABLE UBool U_EXPORT2 |
| uregex_findNext(URegularExpression *regexp, |
| UErrorCode *status); |
| |
| /** |
| * Get the number of capturing groups in this regular expression's pattern. |
| * @param regexp The compiled regular expression. |
| * @param status A reference to a UErrorCode to receive any errors. |
| * @return the number of capture groups |
| * @stable ICU 3.0 |
| */ |
| U_STABLE int32_t U_EXPORT2 |
| uregex_groupCount(URegularExpression *regexp, |
| UErrorCode *status); |
| |
| /** |
| * Get the group number corresponding to a named capture group. |
| * The returned number can be used with any function that access |
| * capture groups by number. |
| * |
| * The function returns an error status if the specified name does not |
| * appear in the pattern. |
| * |
| * @param regexp The compiled regular expression. |
| * @param groupName The capture group name. |
| * @param nameLength The length of the name, or -1 if the name is a |
| * nul-terminated string. |
| * @param status A pointer to a UErrorCode to receive any errors. |
| * |
| * @stable ICU 55 |
| */ |
| U_STABLE int32_t U_EXPORT2 |
| uregex_groupNumberFromName(URegularExpression *regexp, |
| const UChar *groupName, |
| int32_t nameLength, |
| UErrorCode *status); |
| |
| |
| /** |
| * Get the group number corresponding to a named capture group. |
| * The returned number can be used with any function that access |
| * capture groups by number. |
| * |
| * The function returns an error status if the specified name does not |
| * appear in the pattern. |
| * |
| * @param regexp The compiled regular expression. |
| * @param groupName The capture group name, |
| * platform invariant characters only. |
| * @param nameLength The length of the name, or -1 if the name is |
| * nul-terminated. |
| * @param status A pointer to a UErrorCode to receive any errors. |
| * |
| * @stable ICU 55 |
| */ |
| U_STABLE int32_t U_EXPORT2 |
| uregex_groupNumberFromCName(URegularExpression *regexp, |
| const char *groupName, |
| int32_t nameLength, |
| UErrorCode *status); |
| |
| /** Extract the string for the specified matching expression or subexpression. |
| * Group #0 is the complete string of matched text. |
| * Group #1 is the text matched by the first set of capturing parentheses. |
| * |
| * @param regexp The compiled regular expression. |
| * @param groupNum The capture group to extract. Group 0 is the complete |
| * match. The value of this parameter must be |
| * less than or equal to the number of capture groups in |
| * the pattern. |
| * @param dest Buffer to receive the matching string data |
| * @param destCapacity Capacity of the dest buffer. |
| * @param status A reference to a UErrorCode to receive any errors. |
| * @return Length of matching data, |
| * or -1 if no applicable match. |
| * @stable ICU 3.0 |
| */ |
| U_STABLE int32_t U_EXPORT2 |
| uregex_group(URegularExpression *regexp, |
| int32_t groupNum, |
| UChar *dest, |
| int32_t destCapacity, |
| UErrorCode *status); |
| |
| /** Returns a shallow immutable clone of the entire input string with the current index set |
| * to the beginning of the requested capture group. The capture group length is also |
| * returned via groupLength. |
| * Group #0 is the complete string of matched text. |
| * Group #1 is the text matched by the first set of capturing parentheses. |
| * |
| * @param regexp The compiled regular expression. |
| * @param groupNum The capture group to extract. Group 0 is the complete |
| * match. The value of this parameter must be |
| * less than or equal to the number of capture groups in |
| * the pattern. |
| * @param dest A mutable UText in which to store the current input. |
| * If NULL, a new UText will be created as an immutable shallow clone |
| * of the entire input string. |
| * @param groupLength The group length of the desired capture group. Output parameter. |
| * @param status A reference to a UErrorCode to receive any errors. |
| * @return The subject text currently associated with this regular expression. |
| * If a pre-allocated UText was provided, it will always be used and returned. |
| |
| * |
| * @stable ICU 4.6 |
| */ |
| U_STABLE UText * U_EXPORT2 |
| uregex_groupUText(URegularExpression *regexp, |
| int32_t groupNum, |
| UText *dest, |
| int64_t *groupLength, |
| UErrorCode *status); |
| |
| /** |
| * Returns the index in the input string of the start of the text matched by the |
| * specified capture group during the previous match operation. Return -1 if |
| * the capture group was not part of the last match. |
| * Group #0 refers to the complete range of matched text. |
| * Group #1 refers to the text matched by the first set of capturing parentheses. |
| * |
| * @param regexp The compiled regular expression. |
| * @param groupNum The capture group number |
| * @param status A reference to a UErrorCode to receive any errors. |
| * @return the starting (native) position in the input of the text matched |
| * by the specified group. |
| * @stable ICU 3.0 |
| */ |
| U_STABLE int32_t U_EXPORT2 |
| uregex_start(URegularExpression *regexp, |
| int32_t groupNum, |
| UErrorCode *status); |
| |
| /** |
| * 64bit version of uregex_start. |
| * Returns the index in the input string of the start of the text matched by the |
| * specified capture group during the previous match operation. Return -1 if |
| * the capture group was not part of the last match. |
| * Group #0 refers to the complete range of matched text. |
| * Group #1 refers to the text matched by the first set of capturing parentheses. |
| * |
| * @param regexp The compiled regular expression. |
| * @param groupNum The capture group number |
| * @param status A reference to a UErrorCode to receive any errors. |
| * @return the starting (native) position in the input of the text matched |
| * by the specified group. |
| * @stable ICU 4.6 |
| */ |
| U_STABLE int64_t U_EXPORT2 |
| uregex_start64(URegularExpression *regexp, |
| int32_t groupNum, |
| UErrorCode *status); |
| |
| /** |
| * Returns the index in the input string of the position following the end |
| * of the text matched by the specified capture group. |
| * Return -1 if the capture group was not part of the last match. |
| * Group #0 refers to the complete range of matched text. |
| * Group #1 refers to the text matched by the first set of capturing parentheses. |
| * |
| * @param regexp The compiled regular expression. |
| * @param groupNum The capture group number |
| * @param status A reference to a UErrorCode to receive any errors. |
| * @return the (native) index of the position following the last matched character. |
| * @stable ICU 3.0 |
| */ |
| U_STABLE int32_t U_EXPORT2 |
| uregex_end(URegularExpression *regexp, |
| int32_t groupNum, |
| UErrorCode *status); |
| |
| /** |
| * 64bit version of uregex_end. |
| * Returns the index in the input string of the position following the end |
| * of the text matched by the specified capture group. |
| * Return -1 if the capture group was not part of the last match. |
| * Group #0 refers to the complete range of matched text. |
| * Group #1 refers to the text matched by the first set of capturing parentheses. |
| * |
| * @param regexp The compiled regular expression. |
| * @param groupNum The capture group number |
| * @param status A reference to a UErrorCode to receive any errors. |
| * @return the (native) index of the position following the last matched character. |
| * @stable ICU 4.6 |
| */ |
| U_STABLE int64_t U_EXPORT2 |
| uregex_end64(URegularExpression *regexp, |
| int32_t groupNum, |
| UErrorCode *status); |
| |
| /** |
| * Reset any saved state from the previous match. Has the effect of |
| * causing uregex_findNext to begin at the specified index, and causing |
| * uregex_start(), uregex_end() and uregex_group() to return an error |
| * indicating that there is no match information available. Clears any |
| * match region that may have been set. |
| * |
| * @param regexp The compiled regular expression. |
| * @param index The position (native) in the text at which a |
| * uregex_findNext() should begin searching. |
| * @param status A reference to a UErrorCode to receive any errors. |
| * @stable ICU 3.0 |
| */ |
| U_STABLE void U_EXPORT2 |
| uregex_reset(URegularExpression *regexp, |
| int32_t index, |
| UErrorCode *status); |
| |
| /** |
| * 64bit version of uregex_reset. |
| * Reset any saved state from the previous match. Has the effect of |
| * causing uregex_findNext to begin at the specified index, and causing |
| * uregex_start(), uregex_end() and uregex_group() to return an error |
| * indicating that there is no match information available. Clears any |
| * match region that may have been set. |
| * |
| * @param regexp The compiled regular expression. |
| * @param index The position (native) in the text at which a |
| * uregex_findNext() should begin searching. |
| * @param status A reference to a UErrorCode to receive any errors. |
| * @stable ICU 4.6 |
| */ |
| U_STABLE void U_EXPORT2 |
| uregex_reset64(URegularExpression *regexp, |
| int64_t index, |
| UErrorCode *status); |
| |
| /** |
| * Sets the limits of the matching region for this URegularExpression. |
| * The region is the part of the input string that will be considered when matching. |
| * Invoking this method resets any saved state from the previous match, |
| * then sets the region to start at the index specified by the start parameter |
| * and end at the index specified by the end parameter. |
| * |
| * Depending on the transparency and anchoring being used (see useTransparentBounds |
| * and useAnchoringBounds), certain constructs such as anchors may behave differently |
| * at or around the boundaries of the region |
| * |
| * The function will fail if start is greater than limit, or if either index |
| * is less than zero or greater than the length of the string being matched. |
| * |
| * @param regexp The compiled regular expression. |
| * @param regionStart The (native) index to begin searches at. |
| * @param regionLimit The (native) index to end searches at (exclusive). |
| * @param status A pointer to a UErrorCode to receive any errors. |
| * @stable ICU 4.0 |
| */ |
| U_STABLE void U_EXPORT2 |
| uregex_setRegion(URegularExpression *regexp, |
| int32_t regionStart, |
| int32_t regionLimit, |
| UErrorCode *status); |
| |
| /** |
| * 64bit version of uregex_setRegion. |
| * Sets the limits of the matching region for this URegularExpression. |
| * The region is the part of the input string that will be considered when matching. |
| * Invoking this method resets any saved state from the previous match, |
| * then sets the region to start at the index specified by the start parameter |
| * and end at the index specified by the end parameter. |
| * |
| * Depending on the transparency and anchoring being used (see useTransparentBounds |
| * and useAnchoringBounds), certain constructs such as anchors may behave differently |
| * at or around the boundaries of the region |
| * |
| * The function will fail if start is greater than limit, or if either index |
| * is less than zero or greater than the length of the string being matched. |
| * |
| * @param regexp The compiled regular expression. |
| * @param regionStart The (native) index to begin searches at. |
| * @param regionLimit The (native) index to end searches at (exclusive). |
| * @param status A pointer to a UErrorCode to receive any errors. |
| * @stable ICU 4.6 |
| */ |
| U_STABLE void U_EXPORT2 |
| uregex_setRegion64(URegularExpression *regexp, |
| int64_t regionStart, |
| int64_t regionLimit, |
| UErrorCode *status); |
| |
| /** |
| * Set the matching region and the starting index for subsequent matches |
| * in a single operation. |
| * This is useful because the usual function for setting the starting |
| * index, urgex_reset(), also resets any region limits. |
| * |
| * @param regexp The compiled regular expression. |
| * @param regionStart The (native) index to begin searches at. |
| * @param regionLimit The (native) index to end searches at (exclusive). |
| * @param startIndex The index in the input text at which the next |
| * match operation should begin. |
| * @param status A pointer to a UErrorCode to receive any errors. |
| * @stable ICU 4.6 |
| */ |
| U_STABLE void U_EXPORT2 |
| uregex_setRegionAndStart(URegularExpression *regexp, |
| int64_t regionStart, |
| int64_t regionLimit, |
| int64_t startIndex, |
| UErrorCode *status); |
| |
| /** |
| * Reports the start index of the matching region. Any matches found are limited to |
| * to the region bounded by regionStart (inclusive) and regionEnd (exclusive). |
| * |
| * @param regexp The compiled regular expression. |
| * @param status A pointer to a UErrorCode to receive any errors. |
| * @return The starting (native) index of this matcher's region. |
| * @stable ICU 4.0 |
| */ |
| U_STABLE int32_t U_EXPORT2 |
| uregex_regionStart(const URegularExpression *regexp, |
| UErrorCode *status); |
| |
| /** |
| * 64bit version of uregex_regionStart. |
| * Reports the start index of the matching region. Any matches found are limited to |
| * to the region bounded by regionStart (inclusive) and regionEnd (exclusive). |
| * |
| * @param regexp The compiled regular expression. |
| * @param status A pointer to a UErrorCode to receive any errors. |
| * @return The starting (native) index of this matcher's region. |
| * @stable ICU 4.6 |
| */ |
| U_STABLE int64_t U_EXPORT2 |
| uregex_regionStart64(const URegularExpression *regexp, |
| UErrorCode *status); |
| |
| /** |
| * Reports the end index (exclusive) of the matching region for this URegularExpression. |
| * Any matches found are limited to to the region bounded by regionStart (inclusive) |
| * and regionEnd (exclusive). |
| * |
| * @param regexp The compiled regular expression. |
| * @param status A pointer to a UErrorCode to receive any errors. |
| * @return The ending point (native) of this matcher's region. |
| * @stable ICU 4.0 |
| */ |
| U_STABLE int32_t U_EXPORT2 |
| uregex_regionEnd(const URegularExpression *regexp, |
| UErrorCode *status); |
| |
| /** |
| * 64bit version of uregex_regionEnd. |
| * Reports the end index (exclusive) of the matching region for this URegularExpression. |
| * Any matches found are limited to to the region bounded by regionStart (inclusive) |
| * and regionEnd (exclusive). |
| * |
| * @param regexp The compiled regular expression. |
| * @param status A pointer to a UErrorCode to receive any errors. |
| * @return The ending point (native) of this matcher's region. |
| * @stable ICU 4.6 |
| */ |
| U_STABLE int64_t U_EXPORT2 |
| uregex_regionEnd64(const URegularExpression *regexp, |
| UErrorCode *status); |
| |
| /** |
| * Queries the transparency of region bounds for this URegularExpression. |
| * See useTransparentBounds for a description of transparent and opaque bounds. |
| * By default, matching boundaries are opaque. |
| * |
| * @param regexp The compiled regular expression. |
| * @param status A pointer to a UErrorCode to receive any errors. |
| * @return TRUE if this matcher is using opaque bounds, false if it is not. |
| * @stable ICU 4.0 |
| */ |
| U_STABLE UBool U_EXPORT2 |
| uregex_hasTransparentBounds(const URegularExpression *regexp, |
| UErrorCode *status); |
| |
| |
| /** |
| * Sets the transparency of region bounds for this URegularExpression. |
| * Invoking this function with an argument of TRUE will set matches to use transparent bounds. |
| * If the boolean argument is FALSE, then opaque bounds will be used. |
| * |
| * Using transparent bounds, the boundaries of the matching region are transparent |
| * to lookahead, lookbehind, and boundary matching constructs. Those constructs can |
| * see text beyond the boundaries of the region while checking for a match. |
| * |
| * With opaque bounds, no text outside of the matching region is visible to lookahead, |
| * lookbehind, and boundary matching constructs. |
| * |
| * By default, opaque bounds are used. |
| * |
| * @param regexp The compiled regular expression. |
| * @param b TRUE for transparent bounds; FALSE for opaque bounds |
| * @param status A pointer to a UErrorCode to receive any errors. |
| * @stable ICU 4.0 |
| **/ |
| U_STABLE void U_EXPORT2 |
| uregex_useTransparentBounds(URegularExpression *regexp, |
| UBool b, |
| UErrorCode *status); |
| |
| |
| /** |
| * Return true if this URegularExpression is using anchoring bounds. |
| * By default, anchoring region bounds are used. |
| * |
| * @param regexp The compiled regular expression. |
| * @param status A pointer to a UErrorCode to receive any errors. |
| * @return TRUE if this matcher is using anchoring bounds. |
| * @stable ICU 4.0 |
| */ |
| U_STABLE UBool U_EXPORT2 |
| uregex_hasAnchoringBounds(const URegularExpression *regexp, |
| UErrorCode *status); |
| |
| |
| /** |
| * Set whether this URegularExpression is using Anchoring Bounds for its region. |
| * With anchoring bounds, pattern anchors such as ^ and $ will match at the start |
| * and end of the region. Without Anchoring Bounds, anchors will only match at |
| * the positions they would in the complete text. |
| * |
| * Anchoring Bounds are the default for regions. |
| * |
| * @param regexp The compiled regular expression. |
| * @param b TRUE if to enable anchoring bounds; FALSE to disable them. |
| * @param status A pointer to a UErrorCode to receive any errors. |
| * @stable ICU 4.0 |
| */ |
| U_STABLE void U_EXPORT2 |
| uregex_useAnchoringBounds(URegularExpression *regexp, |
| UBool b, |
| UErrorCode *status); |
| |
| /** |
| * Return TRUE if the most recent matching operation touched the |
| * end of the text being processed. In this case, additional input text could |
| * change the results of that match. |
| * |
| * @param regexp The compiled regular expression. |
| * @param status A pointer to a UErrorCode to receive any errors. |
| * @return TRUE if the most recent match hit the end of input |
| * @stable ICU 4.0 |
| */ |
| U_STABLE UBool U_EXPORT2 |
| uregex_hitEnd(const URegularExpression *regexp, |
| UErrorCode *status); |
| |
| /** |
| * Return TRUE the most recent match succeeded and additional input could cause |
| * it to fail. If this function returns false and a match was found, then more input |
| * might change the match but the match won't be lost. If a match was not found, |
| * then requireEnd has no meaning. |
| * |
| * @param regexp The compiled regular expression. |
| * @param status A pointer to a UErrorCode to receive any errors. |
| * @return TRUE if more input could cause the most recent match to no longer match. |
| * @stable ICU 4.0 |
| */ |
| U_STABLE UBool U_EXPORT2 |
| uregex_requireEnd(const URegularExpression *regexp, |
| UErrorCode *status); |
| |
| |
| |
| |
| |
| /** |
| * Replaces every substring of the input that matches the pattern |
| * with the given replacement string. This is a convenience function that |
| * provides a complete find-and-replace-all operation. |
| * |
| * This method scans the input string looking for matches of the pattern. |
| * Input that is not part of any match is copied unchanged to the |
| * destination buffer. Matched regions are replaced in the output |
| * buffer by the replacement string. The replacement string may contain |
| * references to capture groups; these take the form of $1, $2, etc. |
| * |
| * @param regexp The compiled regular expression. |
| * @param replacementText A string containing the replacement text. |
| * @param replacementLength The length of the replacement string, or |
| * -1 if it is NUL terminated. |
| * @param destBuf A (UChar *) buffer that will receive the result. |
| * @param destCapacity The capacity of the destination buffer. |
| * @param status A reference to a UErrorCode to receive any errors. |
| * @return The length of the string resulting from the find |
| * and replace operation. In the event that the |
| * destination capacity is inadequate, the return value |
| * is still the full length of the untruncated string. |
| * @stable ICU 3.0 |
| */ |
| U_STABLE int32_t U_EXPORT2 |
| uregex_replaceAll(URegularExpression *regexp, |
| const UChar *replacementText, |
| int32_t replacementLength, |
| UChar *destBuf, |
| int32_t destCapacity, |
| UErrorCode *status); |
| |
| /** |
| * Replaces every substring of the input that matches the pattern |
| * with the given replacement string. This is a convenience function that |
| * provides a complete find-and-replace-all operation. |
| * |
| * This method scans the input string looking for matches of the pattern. |
| * Input that is not part of any match is copied unchanged to the |
| * destination buffer. Matched regions are replaced in the output |
| * buffer by the replacement string. The replacement string may contain |
| * references to capture groups; these take the form of $1, $2, etc. |
| * |
| * @param regexp The compiled regular expression. |
| * @param replacement A string containing the replacement text. |
| * @param dest A mutable UText that will receive the result. |
| * If NULL, a new UText will be created (which may not be mutable). |
| * @param status A reference to a UErrorCode to receive any errors. |
| * @return A UText containing the results of the find and replace. |
| * If a pre-allocated UText was provided, it will always be used and returned. |
| * |
| * @stable ICU 4.6 |
| */ |
| U_STABLE UText * U_EXPORT2 |
| uregex_replaceAllUText(URegularExpression *regexp, |
| UText *replacement, |
| UText *dest, |
| UErrorCode *status); |
| |
| /** |
| * Replaces the first substring of the input that matches the pattern |
| * with the given replacement string. This is a convenience function that |
| * provides a complete find-and-replace operation. |
| * |
| * This method scans the input string looking for a match of the pattern. |
| * All input that is not part of the match is copied unchanged to the |
| * destination buffer. The matched region is replaced in the output |
| * buffer by the replacement string. The replacement string may contain |
| * references to capture groups; these take the form of $1, $2, etc. |
| * |
| * @param regexp The compiled regular expression. |
| * @param replacementText A string containing the replacement text. |
| * @param replacementLength The length of the replacement string, or |
| * -1 if it is NUL terminated. |
| * @param destBuf A (UChar *) buffer that will receive the result. |
| * @param destCapacity The capacity of the destination buffer. |
| * @param status a reference to a UErrorCode to receive any errors. |
| * @return The length of the string resulting from the find |
| * and replace operation. In the event that the |
| * destination capacity is inadequate, the return value |
| * is still the full length of the untruncated string. |
| * @stable ICU 3.0 |
| */ |
| U_STABLE int32_t U_EXPORT2 |
| uregex_replaceFirst(URegularExpression *regexp, |
| const UChar *replacementText, |
| int32_t replacementLength, |
| UChar *destBuf, |
| int32_t destCapacity, |
| UErrorCode *status); |
| |
| /** |
| * Replaces the first substring of the input that matches the pattern |
| * with the given replacement string. This is a convenience function that |
| * provides a complete find-and-replace operation. |
| * |
| * This method scans the input string looking for a match of the pattern. |
| * All input that is not part of the match is copied unchanged to the |
| * destination buffer. The matched region is replaced in the output |
| * buffer by the replacement string. The replacement string may contain |
| * references to capture groups; these take the form of $1, $2, etc. |
| * |
| * @param regexp The compiled regular expression. |
| * @param replacement A string containing the replacement text. |
| * @param dest A mutable UText that will receive the result. |
| * If NULL, a new UText will be created (which may not be mutable). |
| * @param status A reference to a UErrorCode to receive any errors. |
| * @return A UText containing the results of the find and replace. |
| * If a pre-allocated UText was provided, it will always be used and returned. |
| * |
| * @stable ICU 4.6 |
| */ |
| U_STABLE UText * U_EXPORT2 |
| uregex_replaceFirstUText(URegularExpression *regexp, |
| UText *replacement, |
| UText *dest, |
| UErrorCode *status); |
| |
| /** |
| * Implements a replace operation intended to be used as part of an |
| * incremental find-and-replace. |
| * |
| * <p>The input string, starting from the end of the previous match and ending at |
| * the start of the current match, is appended to the destination string. Then the |
| * replacement string is appended to the output string, |
| * including handling any substitutions of captured text.</p> |
| * |
| * <p>A note on preflight computation of buffersize and error handling: |
| * Calls to uregex_appendReplacement() and uregex_appendTail() are |
| * designed to be chained, one after another, with the destination |
| * buffer pointer and buffer capacity updated after each in preparation |
| * to for the next. If the destination buffer is exhausted partway through such a |
| * sequence, a U_BUFFER_OVERFLOW_ERROR status will be returned. Normal |
| * ICU conventions are for a function to perform no action if it is |
| * called with an error status, but for this one case, uregex_appendRepacement() |
| * will operate normally so that buffer size computations will complete |
| * correctly. |
| * |
| * <p>For simple, prepackaged, non-incremental find-and-replace |
| * operations, see replaceFirst() or replaceAll().</p> |
| * |
| * @param regexp The regular expression object. |
| * @param replacementText The string that will replace the matched portion of the |
| * input string as it is copied to the destination buffer. |
| * The replacement text may contain references ($1, for |
| * example) to capture groups from the match. |
| * @param replacementLength The length of the replacement text string, |
| * or -1 if the string is NUL terminated. |
| * @param destBuf The buffer into which the results of the |
| * find-and-replace are placed. On return, this pointer |
| * will be updated to refer to the beginning of the |
| * unused portion of buffer, leaving it in position for |
| * a subsequent call to this function. |
| * @param destCapacity The size of the output buffer, On return, this |
| * parameter will be updated to reflect the space remaining |
| * unused in the output buffer. |
| * @param status A reference to a UErrorCode to receive any errors. |
| * @return The length of the result string. In the event that |
| * destCapacity is inadequate, the full length of the |
| * untruncated output string is returned. |
| * |
| * @stable ICU 3.0 |
| * |
| */ |
| U_STABLE int32_t U_EXPORT2 |
| uregex_appendReplacement(URegularExpression *regexp, |
| const UChar *replacementText, |
| int32_t replacementLength, |
| UChar **destBuf, |
| int32_t *destCapacity, |
| UErrorCode *status); |
| |
| /** |
| * Implements a replace operation intended to be used as part of an |
| * incremental find-and-replace. |
| * |
| * <p>The input string, starting from the end of the previous match and ending at |
| * the start of the current match, is appended to the destination string. Then the |
| * replacement string is appended to the output string, |
| * including handling any substitutions of captured text.</p> |
| * |
| * <p>For simple, prepackaged, non-incremental find-and-replace |
| * operations, see replaceFirst() or replaceAll().</p> |
| * |
| * @param regexp The regular expression object. |
| * @param replacementText The string that will replace the matched portion of the |
| * input string as it is copied to the destination buffer. |
| * The replacement text may contain references ($1, for |
| * example) to capture groups from the match. |
| * @param dest A mutable UText that will receive the result. Must not be NULL. |
| * @param status A reference to a UErrorCode to receive any errors. |
| * |
| * @stable ICU 4.6 |
| */ |
| U_STABLE void U_EXPORT2 |
| uregex_appendReplacementUText(URegularExpression *regexp, |
| UText *replacementText, |
| UText *dest, |
| UErrorCode *status); |
| |
| /** |
| * As the final step in a find-and-replace operation, append the remainder |
| * of the input string, starting at the position following the last match, |
| * to the destination string. <code>uregex_appendTail()</code> is intended |
| * to be invoked after one or more invocations of the |
| * <code>uregex_appendReplacement()</code> function. |
| * |
| * @param regexp The regular expression object. This is needed to |
| * obtain the input string and with the position |
| * of the last match within it. |
| * @param destBuf The buffer in which the results of the |
| * find-and-replace are placed. On return, the pointer |
| * will be updated to refer to the beginning of the |
| * unused portion of buffer. |
| * @param destCapacity The size of the output buffer, On return, this |
| * value will be updated to reflect the space remaining |
| * unused in the output buffer. |
| * @param status A reference to a UErrorCode to receive any errors. |
| * @return The length of the result string. In the event that |
| * destCapacity is inadequate, the full length of the |
| * untruncated output string is returned. |
| * |
| * @stable ICU 3.0 |
| */ |
| U_STABLE int32_t U_EXPORT2 |
| uregex_appendTail(URegularExpression *regexp, |
| UChar **destBuf, |
| int32_t *destCapacity, |
| UErrorCode *status); |
| |
| /** |
| * As the final step in a find-and-replace operation, append the remainder |
| * of the input string, starting at the position following the last match, |
| * to the destination string. <code>uregex_appendTailUText()</code> is intended |
| * to be invoked after one or more invocations of the |
| * <code>uregex_appendReplacementUText()</code> function. |
| * |
| * @param regexp The regular expression object. This is needed to |
| * obtain the input string and with the position |
| * of the last match within it. |
| * @param dest A mutable UText that will receive the result. Must not be NULL. |
| * |
| * @param status Error code |
| * |
| * @return The destination UText. |
| * |
| * @stable ICU 4.6 |
| */ |
| U_STABLE UText * U_EXPORT2 |
| uregex_appendTailUText(URegularExpression *regexp, |
| UText *dest, |
| UErrorCode *status); |
| |
| /** |
| * Split a string into fields. Somewhat like split() from Perl. |
| * The pattern matches identify delimiters that separate the input |
| * into fields. The input data between the matches becomes the |
| * fields themselves. |
| * |
| * Each of the fields is copied from the input string to the destination |
| * buffer, and NUL terminated. The position of each field within |
| * the destination buffer is returned in the destFields array. |
| * |
| * If the delimiter pattern includes capture groups, the captured text will |
| * also appear in the destination array of output strings, interspersed |
| * with the fields. This is similar to Perl, but differs from Java, |
| * which ignores the presence of capture groups in the pattern. |
| * |
| * Trailing empty fields will always be returned, assuming sufficient |
| * destination capacity. This differs from the default behavior for Java |
| * and Perl where trailing empty fields are not returned. |
| * |
| * The number of strings produced by the split operation is returned. |
| * This count includes the strings from capture groups in the delimiter pattern. |
| * This behavior differs from Java, which ignores capture groups. |
| * |
| * @param regexp The compiled regular expression. |
| * @param destBuf A (UChar *) buffer to receive the fields that |
| * are extracted from the input string. These |
| * field pointers will refer to positions within the |
| * destination buffer supplied by the caller. Any |
| * extra positions within the destFields array will be |
| * set to NULL. |
| * @param destCapacity The capacity of the destBuf. |
| * @param requiredCapacity The actual capacity required of the destBuf. |
| * If destCapacity is too small, requiredCapacity will return |
| * the total capacity required to hold all of the output, and |
| * a U_BUFFER_OVERFLOW_ERROR will be returned. |
| * @param destFields An array to be filled with the position of each |
| * of the extracted fields within destBuf. |
| * @param destFieldsCapacity The number of elements in the destFields array. |
| * If the number of fields found is less than destFieldsCapacity, |
| * the extra destFields elements are set to zero. |
| * If destFieldsCapacity is too small, the trailing part of the |
| * input, including any field delimiters, is treated as if it |
| * were the last field - it is copied to the destBuf, and |
| * its position is in the destBuf is stored in the last element |
| * of destFields. This behavior mimics that of Perl. It is not |
| * an error condition, and no error status is returned when all destField |
| * positions are used. |
| * @param status A reference to a UErrorCode to receive any errors. |
| * @return The number of fields into which the input string was split. |
| * @stable ICU 3.0 |
| */ |
| U_STABLE int32_t U_EXPORT2 |
| uregex_split( URegularExpression *regexp, |
| UChar *destBuf, |
| int32_t destCapacity, |
| int32_t *requiredCapacity, |
| UChar *destFields[], |
| int32_t destFieldsCapacity, |
| UErrorCode *status); |
| |
| /** |
| * Split a string into fields. Somewhat like split() from Perl. |
| * The pattern matches identify delimiters that separate the input |
| * into fields. The input data between the matches becomes the |
| * fields themselves. |
| * <p> |
| * The behavior of this function is not very closely aligned with uregex_split(); |
| * instead, it is based on (and implemented directly on top of) the C++ split method. |
| * |
| * @param regexp The compiled regular expression. |
| * @param destFields An array of mutable UText structs to receive the results of the split. |
| * If a field is NULL, a new UText is allocated to contain the results for |
| * that field. This new UText is not guaranteed to be mutable. |
| * @param destFieldsCapacity The number of elements in the destination array. |
| * If the number of fields found is less than destCapacity, the |
| * extra strings in the destination array are not altered. |
| * If the number of destination strings is less than the number |
| * of fields, the trailing part of the input string, including any |
| * field delimiters, is placed in the last destination string. |
| * This behavior mimics that of Perl. It is not an error condition, and no |
| * error status is returned when all destField positions are used. |
| * @param status A reference to a UErrorCode to receive any errors. |
| * @return The number of fields into which the input string was split. |
| * |
| * @stable ICU 4.6 |
| */ |
| U_STABLE int32_t U_EXPORT2 |
| uregex_splitUText(URegularExpression *regexp, |
| UText *destFields[], |
| int32_t destFieldsCapacity, |
| UErrorCode *status); |
| |
| /** |
| * Set a processing time limit for match operations with this URegularExpression. |
| * |
| * Some patterns, when matching certain strings, can run in exponential time. |
| * For practical purposes, the match operation may appear to be in an |
| * infinite loop. |
| * When a limit is set a match operation will fail with an error if the |
| * limit is exceeded. |
| * <p> |
| * The units of the limit are steps of the match engine. |
| * Correspondence with actual processor time will depend on the speed |
| * of the processor and the details of the specific pattern, but will |
| * typically be on the order of milliseconds. |
| * <p> |
| * By default, the matching time is not limited. |
| * <p> |
| * |
| * @param regexp The compiled regular expression. |
| * @param limit The limit value, or 0 for no limit. |
| * @param status A reference to a UErrorCode to receive any errors. |
| * @stable ICU 4.0 |
| */ |
| U_STABLE void U_EXPORT2 |
| uregex_setTimeLimit(URegularExpression *regexp, |
| int32_t limit, |
| UErrorCode *status); |
| |
| /** |
| * Get the time limit for for matches with this URegularExpression. |
| * A return value of zero indicates that there is no limit. |
| * |
| * @param regexp The compiled regular expression. |
| * @param status A reference to a UErrorCode to receive any errors. |
| * @return the maximum allowed time for a match, in units of processing steps. |
| * @stable ICU 4.0 |
| */ |
| U_STABLE int32_t U_EXPORT2 |
| uregex_getTimeLimit(const URegularExpression *regexp, |
| UErrorCode *status); |
| |
| /** |
| * Set the amount of heap storage available for use by the match backtracking stack. |
| * <p> |
| * ICU uses a backtracking regular expression engine, with the backtrack stack |
| * maintained on the heap. This function sets the limit to the amount of memory |
| * that can be used for this purpose. A backtracking stack overflow will |
| * result in an error from the match operation that caused it. |
| * <p> |
| * A limit is desirable because a malicious or poorly designed pattern can use |
| * excessive memory, potentially crashing the process. A limit is enabled |
| * by default. |
| * <p> |
| * @param regexp The compiled regular expression. |
| * @param limit The maximum size, in bytes, of the matching backtrack stack. |
| * A value of zero means no limit. |
| * The limit must be greater than or equal to zero. |
| * @param status A reference to a UErrorCode to receive any errors. |
| * |
| * @stable ICU 4.0 |
| */ |
| U_STABLE void U_EXPORT2 |
| uregex_setStackLimit(URegularExpression *regexp, |
| int32_t limit, |
| UErrorCode *status); |
| |
| /** |
| * Get the size of the heap storage available for use by the back tracking stack. |
| * |
| * @return the maximum backtracking stack size, in bytes, or zero if the |
| * stack size is unlimited. |
| * @stable ICU 4.0 |
| */ |
| U_STABLE int32_t U_EXPORT2 |
| uregex_getStackLimit(const URegularExpression *regexp, |
| UErrorCode *status); |
| |
| |
| /** |
| * Function pointer for a regular expression matching callback function. |
| * When set, a callback function will be called periodically during matching |
| * operations. If the call back function returns FALSE, the matching |
| * operation will be terminated early. |
| * |
| * Note: the callback function must not call other functions on this |
| * URegularExpression. |
| * |
| * @param context context pointer. The callback function will be invoked |
| * with the context specified at the time that |
| * uregex_setMatchCallback() is called. |
| * @param steps the accumulated processing time, in match steps, |
| * for this matching operation. |
| * @return TRUE to continue the matching operation. |
| * FALSE to terminate the matching operation. |
| * @stable ICU 4.0 |
| */ |
| U_CDECL_BEGIN |
| typedef UBool U_CALLCONV URegexMatchCallback ( |
| const void *context, |
| int32_t steps); |
| U_CDECL_END |
| |
| /** |
| * Set a callback function for this URegularExpression. |
| * During matching operations the function will be called periodically, |
| * giving the application the opportunity to terminate a long-running |
| * match. |
| * |
| * @param regexp The compiled regular expression. |
| * @param callback A pointer to the user-supplied callback function. |
| * @param context User context pointer. The value supplied at the |
| * time the callback function is set will be saved |
| * and passed to the callback each time that it is called. |
| * @param status A reference to a UErrorCode to receive any errors. |
| * @stable ICU 4.0 |
| */ |
| U_STABLE void U_EXPORT2 |
| uregex_setMatchCallback(URegularExpression *regexp, |
| URegexMatchCallback *callback, |
| const void *context, |
| UErrorCode *status); |
| |
| |
| /** |
| * Get the callback function for this URegularExpression. |
| * |
| * @param regexp The compiled regular expression. |
| * @param callback Out parameter, receives a pointer to the user-supplied |
| * callback function. |
| * @param context Out parameter, receives the user context pointer that |
| * was set when uregex_setMatchCallback() was called. |
| * @param status A reference to a UErrorCode to receive any errors. |
| * @stable ICU 4.0 |
| */ |
| U_STABLE void U_EXPORT2 |
| uregex_getMatchCallback(const URegularExpression *regexp, |
| URegexMatchCallback **callback, |
| const void **context, |
| UErrorCode *status); |
| |
| /** |
| * Function pointer for a regular expression find callback function. |
| * |
| * When set, a callback function will be called during a find operation |
| * and for operations that depend on find, such as findNext, split and some replace |
| * operations like replaceFirst. |
| * The callback will usually be called after each attempt at a match, but this is not a |
| * guarantee that the callback will be invoked at each character. For finds where the |
| * match engine is invoked at each character, this may be close to true, but less likely |
| * for more optimized loops where the pattern is known to only start, and the match |
| * engine invoked, at certain characters. |
| * When invoked, this callback will specify the index at which a match operation is about |
| * to be attempted, giving the application the opportunity to terminate a long-running |
| * find operation. |
| * |
| * If the call back function returns FALSE, the find operation will be terminated early. |
| * |
| * Note: the callback function must not call other functions on this |
| * URegularExpression |
| * |
| * @param context context pointer. The callback function will be invoked |
| * with the context specified at the time that |
| * uregex_setFindProgressCallback() is called. |
| * @param matchIndex the next index at which a match attempt will be attempted for this |
| * find operation. If this callback interrupts the search, this is the |
| * index at which a find/findNext operation may be re-initiated. |
| * @return TRUE to continue the matching operation. |
| * FALSE to terminate the matching operation. |
| * @stable ICU 4.6 |
| */ |
| U_CDECL_BEGIN |
| typedef UBool U_CALLCONV URegexFindProgressCallback ( |
| const void *context, |
| int64_t matchIndex); |
| U_CDECL_END |
| |
| |
| /** |
| * Set the find progress callback function for this URegularExpression. |
| * |
| * @param regexp The compiled regular expression. |
| * @param callback A pointer to the user-supplied callback function. |
| * @param context User context pointer. The value supplied at the |
| * time the callback function is set will be saved |
| * and passed to the callback each time that it is called. |
| * @param status A reference to a UErrorCode to receive any errors. |
| * @stable ICU 4.6 |
| */ |
| U_STABLE void U_EXPORT2 |
| uregex_setFindProgressCallback(URegularExpression *regexp, |
| URegexFindProgressCallback *callback, |
| const void *context, |
| UErrorCode *status); |
| |
| /** |
| * Get the find progress callback function for this URegularExpression. |
| * |
| * @param regexp The compiled regular expression. |
| * @param callback Out parameter, receives a pointer to the user-supplied |
| * callback function. |
| * @param context Out parameter, receives the user context pointer that |
| * was set when uregex_setFindProgressCallback() was called. |
| * @param status A reference to a UErrorCode to receive any errors. |
| * @stable ICU 4.6 |
| */ |
| U_STABLE void U_EXPORT2 |
| uregex_getFindProgressCallback(const URegularExpression *regexp, |
| URegexFindProgressCallback **callback, |
| const void **context, |
| UErrorCode *status); |
| |
| #endif /* !UCONFIG_NO_REGULAR_EXPRESSIONS */ |
| #endif /* UREGEX_H */ |
