| # Copyright (C) 2017 Sony Interactive Entertainment Inc. |
| # |
| # Redistribution and use in source and binary forms, with or without |
| # modification, are permitted provided that the following conditions |
| # are met: |
| # |
| # 1. Redistributions of source code must retain the above copyright |
| # notice, this list of conditions and the following disclaimer. |
| # 2. Redistributions in binary form must reproduce the above copyright |
| # notice, this list of conditions and the following disclaimer in the |
| # documentation and/or other materials provided with the distribution. |
| # |
| # THIS SOFTWARE IS PROVIDED BY APPLE AND ITS CONTRIBUTORS "AS IS" AND ANY |
| # EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED |
| # WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE |
| # DISCLAIMED. IN NO EVENT SHALL APPLE OR ITS CONTRIBUTORS BE LIABLE FOR ANY |
| # DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES |
| # (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; |
| # LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND |
| # ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT |
| # (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF |
| # THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| |
| require 'open3' |
| |
| $hasDiff = false |
| if ($hostOS == 'windows' || $hostOS == 'playstation') |
| out, err, status = Open3.capture3("where", "/q", "diff") |
| $hasDiff = status.success? |
| else |
| out, err, status = Open3.capture3("which", "diff") |
| $hasDiff = status.success? |
| end |
| |
| # Prefix each line of str with the name |
| def prefixString(str, name) |
| "#{str}.empty? ? \"\" : #{str}.gsub(/^/m, \"#{name}: \")" |
| end |
| |
| def silentOutputHandler |
| Proc.new { |
| | name | |
| <<-END_SILENT_OUTPUT_HANDLER |
| out = out + err |
| err = nil |
| STDOUT.puts #{prefixString("out", name)} if (!out.empty?) |
| File.open("#{Shellwords.shellescape((Pathname("..") + (name + ".out")).to_s)}", "w") do |out_file| |
| out_file.puts out |
| end |
| END_SILENT_OUTPUT_HANDLER |
| } |
| end |
| |
| # Output handler for tests that are expected to produce meaningful output. |
| def noisyOutputHandler |
| Proc.new { |
| | name | |
| <<-END_NOISY_OUTPUT_HANDLER |
| out = out + err |
| err = nil |
| File.open("#{Shellwords.shellescape((Pathname("..") + (name + ".out")).to_s)}", "w") do |out_file| |
| out_file.puts out |
| end |
| END_NOISY_OUTPUT_HANDLER |
| } |
| end |
| |
| # Error handler for tests that fail exactly when they return non-zero exit status. |
| # This is useful when a test is expected to fail. |
| def simpleErrorHandler |
| Proc.new { |
| | outp, plan | |
| outp.puts "if !success\n" |
| outp.puts " print " + prefixString("\"ERROR: Unexpected exit code \#{status}\\n\"", plan.name) + "\n" |
| outp.puts " " + plan.failCommand |
| outp.puts "else\n" |
| outp.puts " " + plan.successCommand |
| outp.puts "end\n" |
| } |
| end |
| |
| # Error handler for tests that fail exactly when they return zero exit status. |
| def expectedFailErrorHandler |
| Proc.new { |
| | outp, plan | |
| outp.puts "if success\n" |
| outp.puts " print " + prefixString("\"ERROR: Unexpected exit code 0\\n\"", plan.name) + "\n" |
| outp.puts " " + plan.failCommand |
| outp.puts "else\n" |
| outp.puts " " + plan.successCommand |
| outp.puts "end\n" |
| } |
| end |
| |
| # Error handler for tests that fail exactly when they return non-zero exit status and produce |
| # lots of spew. This will echo that spew when the test fails. |
| def noisyErrorHandler |
| Proc.new { |
| | outp, plan | |
| outp.puts "if !success\n" |
| outp.puts " print " + prefixString("out", plan.name) + "\n" |
| outp.puts " print " + prefixString("\"ERROR: Unexpected exit code \#{status}\\n\"", plan.name) + "\n" |
| outp.puts " " + plan.failCommand |
| outp.puts "else\n" |
| outp.puts " " + plan.successCommand |
| outp.puts "end\n" |
| } |
| end |
| |
| def fallbackDiff(expected, output) |
| <<-END_FALLBACK_DIFF |
| # Fallback diff for when diff(1) isn't available |
| diffs = [] |
| line_number = 0 |
| File.open("#{expected}") do | expected | |
| File.open("#{output}") do | actual | |
| loop do |
| l1 = expected.gets |
| l2 = actual.gets |
| if (l1 != l2) |
| diffs.push([line_number, l1, l2]) |
| end |
| line_number = line_number + 1 |
| break if (l1 == nil && l2 == nil) |
| end |
| end |
| end |
| isDifferent = !diffs.empty? |
| diffOut = diffs.map { |
| | diff | |
| "@@ -\#{diff[0]},1 +\#{diff[0]},1 @@\\n" + |
| (diff[1] ? "-\#{diff[1]}" : "") + |
| (diff[2] ? "+\#{diff[2]}" : "") |
| }.join("") |
| END_FALLBACK_DIFF |
| end |
| |
| def runDiff(expected, output) |
| <<-END_RUN_DIFF |
| diffOut, diffStatus = Open3.capture2("diff", |
| "--strip-trailing-cr", |
| "-u", |
| "#{expected}", |
| "#{output}"); |
| isDifferent = !diffStatus.success? |
| END_RUN_DIFF |
| end |
| |
| # Get a difference between two files, using diff where available, falling back |
| # on a limited comparison when diff is not available |
| def getDiff(expected, output) |
| if $hasDiff |
| runDiff(expected, output) |
| else |
| fallbackDiff(expected,output) |
| end |
| end |
| |
| # Error handler for tests that diff their output with some expectation. |
| def diffErrorHandler(expectedFilename) |
| Proc.new { |
| | outp, plan | |
| outputFilename = Shellwords.shellescape((Pathname("..") + (plan.name + ".out")).to_s) |
| |
| outp.puts "if !success\n" |
| outp.puts " print " + prefixString("out", plan.name) + "\n" |
| outp.puts " print " + prefixString("\"ERROR: Unexpected exit code \#{status}\\n\"", plan.name) + "\n" |
| outp.puts " " + plan.failCommand |
| outp.puts "elsif File.exists?(\"../#{Shellwords.shellescape(expectedFilename)}\")\n" |
| outp.puts getDiff("../#{Shellwords.shellescape(expectedFilename)}", outputFilename) |
| outp.puts " if isDifferent\n" |
| outp.puts " print " + prefixString("\"DIFF FAILURE!\\n\"", plan.name) + "\n" |
| outp.puts " print " + prefixString("diffOut", plan.name) + "\n" |
| outp.puts " " + plan.failCommand |
| outp.puts " else" |
| outp.puts " " + plan.successCommand |
| outp.puts " end" |
| outp.puts "else\n" |
| outp.puts " print " + prefixString("\"NO EXPECTATION!\\n\"", plan.name) + "\n" |
| outp.puts " print " + prefixString("out", plan.name) + "\n" |
| outp.puts " " + plan.failCommand |
| outp.puts "end" |
| } |
| end |
| |
| # Error handler for tests that report error by saying "failed!". This is used by Mozilla |
| # tests. |
| def mozillaErrorHandler |
| Proc.new { |
| | outp, plan | |
| outp.puts "if !success\n" |
| outp.puts " print " + prefixString("out", plan.name) + "\n" |
| outp.puts " print " + prefixString("\"ERROR: Unexpected exit code \#{status}\\n\"", plan.name) + "\n" |
| outp.puts " " + plan.failCommand |
| outp.puts "elsif /failed!/i =~ out\n" |
| outp.puts " print " + prefixString("\"Detected failures:\\n\"", plan.name) + "\n" |
| outp.puts " print " + prefixString("out", plan.name) + "\n" |
| outp.puts " " + plan.failCommand |
| outp.puts "else\n" |
| outp.puts " " + plan.successCommand |
| outp.puts "end\n" |
| } |
| end |
| |
| # Error handler for tests that report error by saying "failed!", and are expected to |
| # fail. This is used by Mozilla tests. |
| def mozillaFailErrorHandler |
| Proc.new { |
| | outp, plan | |
| outp.puts "if !success\n" |
| outp.puts " " + plan.successCommand |
| outp.puts "elsif /failed!/i =~ out\n" |
| outp.puts " " + plan.successCommand |
| outp.puts "else\n" |
| outp.puts " print " + prefixString("\"NOTICE: You made this test pass, but it was expected to fail\\n\"", plan.name) + "\n" |
| outp.puts " " + plan.failCommand |
| outp.puts "end\n" |
| } |
| end |
| |
| # Error handler for tests that report error by saying "failed!", and are expected to have |
| # an exit code of 3. |
| def mozillaExit3ErrorHandler |
| Proc.new { |
| | outp, plan | |
| outp.puts "if success\n" |
| outp.puts " print " + prefixString("out", plan.name) + "\n" |
| outp.puts " print " + prefixString("\"ERROR: Test expected to fail, but returned successfully\\n\"", plan.name) + "\n" |
| outp.puts " " + plan.failCommand |
| outp.puts "elsif status != 3" |
| outp.puts " print " + prefixString("out", plan.name) + "\n" |
| outp.puts " print " + prefixString("\"ERROR: Unexpected exit code: \#{status}\\n\"", plan.name) + "\n" |
| outp.puts " " + plan.failCommand |
| outp.puts "elsif /failed!/i =~ out\n" |
| outp.puts " print " + prefixString("\"Detected failures:\\n\"", plan.name) + "\n" |
| outp.puts " print " + prefixString("out", plan.name) + "\n" |
| outp.puts " " + plan.failCommand |
| outp.puts "else\n" |
| outp.puts " " + plan.successCommand |
| outp.puts "end\n" |
| } |
| end |
| |
| # Error handler for tests that report success by saying "Passed" or error by saying "FAILED". |
| # This is used by Chakra tests. |
| def chakraPassFailErrorHandler |
| Proc.new { |
| | outp, plan | |
| outp.puts "if !success\n" |
| outp.puts " print " + prefixString("out", plan.name) + "\n" |
| outp.puts " print " + prefixString("\"ERROR: Unexpected exit code \#{status}\\n\"", plan.name) + "\n" |
| outp.puts " " + plan.failCommand |
| outp.puts "elsif /FAILED/i =~ out\n" |
| outp.puts " print " + prefixString("\"Detected failures:\\n\"", plan.name) + "\n" |
| outp.puts " print " + prefixString("out", plan.name) + "\n" |
| outp.puts " " + plan.failCommand |
| outp.puts "else\n" |
| outp.puts " " + plan.successCommand |
| outp.puts "end\n" |
| } |
| end |
| |
| class Plan |
| attr_reader :directory, :arguments, :family, :name, :outputHandler, :errorHandler, :additionalEnv |
| attr_accessor :index |
| |
| def initialize(directory, arguments, family, name, outputHandler, errorHandler) |
| @directory = directory |
| @arguments = arguments[1..-1] |
| @family = family |
| @name = name |
| @outputHandler = outputHandler |
| @errorHandler = errorHandler |
| @isSlow = !!$runCommandOptions[:isSlow] |
| @additionalEnv = [] |
| end |
| |
| def shellCommand |
| n = @name.gsub(/(\\|\/)/, '_') |
| script = "out = nil\n" |
| script += "err = nil\n" |
| script += "status = -1\n"; |
| script += "success = false\n" |
| script += "File.open(\"#{n}-exit\", \"r\") do |stat|\n"; |
| script += " status = stat.gets.to_i\n" |
| script += "end\n" |
| script += "if (status == 0)\n" |
| script += " success = true\n" |
| script += "end\n" |
| |
| script += "out = File.open(\"#{n}-stdout\", \"r\").read\n" |
| script += "err = File.open(\"#{n}-stderr\", \"r\").read\n" |
| return script |
| end |
| |
| def reproScriptHelper |
| return "" |
| end |
| |
| def reproScriptCommand |
| return "" |
| end |
| |
| def failCommand |
| <<-END_FAIL_COMMAND |
| print "FAIL: #{Shellwords.shellescape(@name)}\n" |
| FileUtils.touch("#{failFile}") |
| #{reproScriptCommand} |
| END_FAIL_COMMAND |
| end |
| |
| def successCommand |
| if $progressMeter or $verbosity >= 2 |
| <<-END_VERBOSE_SUCCESS_COMMAND |
| File.unlink("#{failFile}") if File.exists?("#{failFile}") |
| print "PASS: #{Shellwords.shellescape(@name)}\n" |
| END_VERBOSE_SUCCESS_COMMAND |
| else |
| "File.unlink(\"#{failFile}\") if File.exists?(\"#{failFile}\")\n" |
| end |
| end |
| |
| def failFile |
| "test_fail_#{@index}" |
| end |
| |
| def statusWrite |
| <<-END_STATUS_WRITE |
| if !success |
| File.open("#{failFile}", "w") do |code_file| |
| code_file.puts status |
| end |
| end |
| END_STATUS_WRITE |
| end |
| |
| def writeRunScript(filename) |
| jsonfilepart = filename.basename.to_s + ".json" |
| jsondir = filename.dirname.parent + ".json" |
| if (!jsondir.exist?) |
| jsondir.mkdir |
| end |
| File.open(jsondir + jsonfilepart, "w") { |
| |outp| |
| |
| baseDir = ($runnerDir + ".." + @directory).realdirpath |
| |
| outp.puts JSON.generate({ |
| name: @name, |
| outputDir: $runnerDir, |
| baseDir: baseDir, |
| env: $envVars + @additionalEnv, |
| outputName: @name.gsub(/(\\|\/)/, '_'), |
| checkScript: filename, |
| args: @arguments, |
| failFile: "#{failFile}" |
| }) |
| } |
| |
| File.open(filename, "w") { |
| | outp | |
| #outp.puts "print \"Running #{Shellwords.shellescape(@name)}\\n\"" |
| outp.puts "#{reproScriptHelper}" |
| outp.puts "begin" |
| outp.puts "require 'open3'" |
| outp.puts "require 'fileutils'" |
| |
| cmd = shellCommand |
| |
| cmd += statusWrite |
| |
| cmd += @outputHandler.call(@name) |
| |
| if $verbosity >= 3 |
| outp.puts "print \"#{Shellwords.shellescape(cmd)}\\n\"" |
| end |
| outp.puts cmd |
| @errorHandler.call(outp, self) |
| outp.puts "rescue RuntimeError => e" |
| outp.puts " print \"FAIL: #{Shellwords.shellescape(@name)}\\n\"" |
| outp.puts " FileUtils.touch(\"#{failFile}\")" |
| outp.puts "end" |
| } |
| end |
| end |
| |
| def preparePlayStationTestRunner |
| File.open($runnerDir + "runscript", "w") { |
| | outp | |
| $runlist.each { |
| | plan | |
| outp.puts "../.json/test_script_#{plan.index}.json" |
| } |
| } |
| end |
| |
| def prepareShellTestRunner |
| preparePlayStationTestRunner |
| end |
| |
| def prepareMakeTestRunner(remoteIndex) |
| preparePlayStationTestRunner |
| end |
| |
| def prepareRubyTestRunner |
| preparePlayStationTestRunner |
| end |
| |
| def testRunnerCommand |
| options = ENV["JSCTEST_options"] |
| |
| fsRoot = $jscPath.dirname |
| command = "PlayStationTestRunner #{options} -numProcesses=#{$numChildProcesses.to_s} -exe=#{$jscPath} -fsroot=#{fsRoot} @#{$runnerDir}/runscript" |
| |
| print command |
| |
| return command |
| end |
