| /* |
| * Copyright (C) 2004-2019 Apple Inc. All rights reserved. |
| * Copyright (C) 2005 Alexey Proskuryakov. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions |
| * are met: |
| * 1. Redistributions of source code must retain the above copyright |
| * notice, this list of conditions and the following disclaimer. |
| * 2. Redistributions in binary form must reproduce the above copyright |
| * notice, this list of conditions and the following disclaimer in the |
| * documentation and/or other materials provided with the distribution. |
| * |
| * THIS SOFTWARE IS PROVIDED BY APPLE INC. ``AS IS'' AND ANY |
| * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE |
| * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR |
| * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL APPLE INC. OR |
| * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, |
| * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, |
| * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR |
| * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY |
| * OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT |
| * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE |
| * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| */ |
| |
| #include "config.h" |
| #include "TextIterator.h" |
| |
| #include "ComposedTreeIterator.h" |
| #include "Document.h" |
| #include "Editing.h" |
| #include "FontCascade.h" |
| #include "Frame.h" |
| #include "HTMLBodyElement.h" |
| #include "HTMLElement.h" |
| #include "HTMLFrameOwnerElement.h" |
| #include "HTMLInputElement.h" |
| #include "HTMLLegendElement.h" |
| #include "HTMLMeterElement.h" |
| #include "HTMLNames.h" |
| #include "HTMLParagraphElement.h" |
| #include "HTMLProgressElement.h" |
| #include "HTMLSlotElement.h" |
| #include "HTMLTextAreaElement.h" |
| #include "HTMLTextFormControlElement.h" |
| #include "InlineTextBox.h" |
| #include "NodeTraversal.h" |
| #include "RenderImage.h" |
| #include "RenderIterator.h" |
| #include "RenderTableCell.h" |
| #include "RenderTableRow.h" |
| #include "RenderTextControl.h" |
| #include "RenderTextFragment.h" |
| #include "ShadowRoot.h" |
| #include "SimpleLineLayout.h" |
| #include "SimpleLineLayoutFunctions.h" |
| #include "SimpleLineLayoutResolver.h" |
| #include "TextBoundaries.h" |
| #include "TextControlInnerElements.h" |
| #include "VisiblePosition.h" |
| #include "VisibleUnits.h" |
| #include <unicode/unorm2.h> |
| #include <wtf/Function.h> |
| #include <wtf/text/CString.h> |
| #include <wtf/text/StringBuilder.h> |
| #include <wtf/text/TextBreakIterator.h> |
| #include <wtf/unicode/CharacterNames.h> |
| |
| #if !UCONFIG_NO_COLLATION |
| #include <unicode/usearch.h> |
| #include <wtf/text/TextBreakIteratorInternalICU.h> |
| #endif |
| |
| namespace WebCore { |
| |
| using namespace WTF::Unicode; |
| using namespace HTMLNames; |
| |
| // Buffer that knows how to compare with a search target. |
| // Keeps enough of the previous text to be able to search in the future, but no more. |
| // Non-breaking spaces are always equal to normal spaces. |
| // Case folding is also done if the CaseInsensitive option is specified. |
| // Matches are further filtered if the AtWordStarts option is specified, although some |
| // matches inside a word are permitted if TreatMedialCapitalAsWordStart is specified as well. |
| class SearchBuffer { |
| WTF_MAKE_NONCOPYABLE(SearchBuffer); |
| public: |
| SearchBuffer(const String& target, FindOptions); |
| ~SearchBuffer(); |
| |
| // Returns number of characters appended; guaranteed to be in the range [1, length]. |
| size_t append(StringView); |
| bool needsMoreContext() const; |
| void prependContext(StringView); |
| void reachedBreak(); |
| |
| // Result is the size in characters of what was found. |
| // And <startOffset> is the number of characters back to the start of what was found. |
| size_t search(size_t& startOffset); |
| bool atBreak() const; |
| |
| #if !UCONFIG_NO_COLLATION |
| |
| private: |
| bool isBadMatch(const UChar*, size_t length) const; |
| bool isWordStartMatch(size_t start, size_t length) const; |
| bool isWordEndMatch(size_t start, size_t length) const; |
| |
| const String m_target; |
| const StringView::UpconvertedCharacters m_targetCharacters; |
| FindOptions m_options; |
| |
| Vector<UChar> m_buffer; |
| size_t m_overlap; |
| size_t m_prefixLength; |
| bool m_atBreak; |
| bool m_needsMoreContext; |
| |
| const bool m_targetRequiresKanaWorkaround; |
| Vector<UChar> m_normalizedTarget; |
| mutable Vector<UChar> m_normalizedMatch; |
| |
| #else |
| |
| private: |
| void append(UChar, bool isCharacterStart); |
| size_t length() const; |
| |
| String m_target; |
| FindOptions m_options; |
| |
| Vector<UChar> m_buffer; |
| Vector<bool> m_isCharacterStartBuffer; |
| bool m_isBufferFull; |
| size_t m_cursor; |
| |
| #endif |
| }; |
| |
| // -------- |
| |
| static const unsigned bitsInWord = sizeof(unsigned) * 8; |
| static const unsigned bitInWordMask = bitsInWord - 1; |
| |
| BitStack::BitStack() |
| : m_size(0) |
| { |
| } |
| |
| BitStack::~BitStack() = default; |
| |
| void BitStack::push(bool bit) |
| { |
| unsigned index = m_size / bitsInWord; |
| unsigned shift = m_size & bitInWordMask; |
| if (!shift && index == m_words.size()) { |
| m_words.grow(index + 1); |
| m_words[index] = 0; |
| } |
| unsigned& word = m_words[index]; |
| unsigned mask = 1U << shift; |
| if (bit) |
| word |= mask; |
| else |
| word &= ~mask; |
| ++m_size; |
| } |
| |
| void BitStack::pop() |
| { |
| if (m_size) |
| --m_size; |
| } |
| |
| bool BitStack::top() const |
| { |
| if (!m_size) |
| return false; |
| unsigned shift = (m_size - 1) & bitInWordMask; |
| return m_words.last() & (1U << shift); |
| } |
| |
| unsigned BitStack::size() const |
| { |
| return m_size; |
| } |
| |
| // -------- |
| |
| // This function is like Range::pastLastNode, except for the fact that it can climb up out of shadow trees. |
| static Node* nextInPreOrderCrossingShadowBoundaries(Node& rangeEndContainer, int rangeEndOffset) |
| { |
| if (rangeEndOffset >= 0 && !rangeEndContainer.isCharacterDataNode()) { |
| if (Node* next = rangeEndContainer.traverseToChildAt(rangeEndOffset)) |
| return next; |
| } |
| for (Node* node = &rangeEndContainer; node; node = node->parentOrShadowHostNode()) { |
| if (Node* next = node->nextSibling()) |
| return next; |
| } |
| return nullptr; |
| } |
| |
| static inline bool fullyClipsContents(Node& node) |
| { |
| auto* renderer = node.renderer(); |
| if (!renderer) { |
| if (!is<Element>(node)) |
| return false; |
| return !downcast<Element>(node).hasDisplayContents(); |
| } |
| if (!is<RenderBox>(*renderer)) |
| return false; |
| auto& box = downcast<RenderBox>(*renderer); |
| if (!box.hasOverflowClip()) |
| return false; |
| |
| // Quirk to keep copy/paste in the CodeMirror editor version used in Jenkins working. |
| if (is<HTMLTextAreaElement>(node)) |
| return box.size().isEmpty(); |
| |
| return box.contentSize().isEmpty(); |
| } |
| |
| static inline bool ignoresContainerClip(Node& node) |
| { |
| auto* renderer = node.renderer(); |
| if (!renderer || renderer->isTextOrLineBreak()) |
| return false; |
| return renderer->style().hasOutOfFlowPosition(); |
| } |
| |
| static void pushFullyClippedState(BitStack& stack, Node& node) |
| { |
| // Push true if this node full clips its contents, or if a parent already has fully |
| // clipped and this is not a node that ignores its container's clip. |
| stack.push(fullyClipsContents(node) || (stack.top() && !ignoresContainerClip(node))); |
| } |
| |
| static void setUpFullyClippedStack(BitStack& stack, Node& node) |
| { |
| // Put the nodes in a vector so we can iterate in reverse order. |
| // FIXME: This (and TextIterator in general) should use ComposedTreeIterator. |
| Vector<Node*, 100> ancestry; |
| for (Node* parent = node.parentOrShadowHostNode(); parent; parent = parent->parentOrShadowHostNode()) |
| ancestry.append(parent); |
| |
| // Call pushFullyClippedState on each node starting with the earliest ancestor. |
| size_t size = ancestry.size(); |
| for (size_t i = 0; i < size; ++i) |
| pushFullyClippedState(stack, *ancestry[size - i - 1]); |
| pushFullyClippedState(stack, node); |
| } |
| |
| static bool isClippedByFrameAncestor(const Document& document, TextIteratorBehavior behavior) |
| { |
| if (!(behavior & TextIteratorClipsToFrameAncestors)) |
| return false; |
| |
| for (auto* owner = document.ownerElement(); owner; owner = owner->document().ownerElement()) { |
| BitStack ownerClipStack; |
| setUpFullyClippedStack(ownerClipStack, *owner); |
| if (ownerClipStack.top()) |
| return true; |
| } |
| return false; |
| } |
| |
| // FIXME: editingIgnoresContent and isRendererReplacedElement try to do the same job. |
| // It's not good to have both of them. |
| bool isRendererReplacedElement(RenderObject* renderer) |
| { |
| if (!renderer) |
| return false; |
| |
| bool isAttachment = false; |
| #if ENABLE(ATTACHMENT_ELEMENT) |
| isAttachment = renderer->isAttachment(); |
| #endif |
| if (renderer->isImage() || renderer->isWidget() || renderer->isMedia() || isAttachment) |
| return true; |
| |
| if (is<Element>(renderer->node())) { |
| Element& element = downcast<Element>(*renderer->node()); |
| if (is<HTMLFormControlElement>(element) || is<HTMLLegendElement>(element) || is<HTMLProgressElement>(element) || element.hasTagName(meterTag)) |
| return true; |
| if (equalLettersIgnoringASCIICase(element.attributeWithoutSynchronization(roleAttr), "img")) |
| return true; |
| } |
| |
| return false; |
| } |
| |
| // -------- |
| |
| inline void TextIteratorCopyableText::reset() |
| { |
| m_singleCharacter = 0; |
| m_string = String(); |
| m_offset = 0; |
| m_length = 0; |
| } |
| |
| inline void TextIteratorCopyableText::set(String&& string) |
| { |
| m_singleCharacter = 0; |
| m_string = WTFMove(string); |
| m_offset = 0; |
| m_length = m_string.length(); |
| } |
| |
| inline void TextIteratorCopyableText::set(String&& string, unsigned offset, unsigned length) |
| { |
| ASSERT(offset < string.length()); |
| ASSERT(length); |
| ASSERT(length <= string.length() - offset); |
| |
| m_singleCharacter = 0; |
| m_string = WTFMove(string); |
| m_offset = offset; |
| m_length = length; |
| } |
| |
| inline void TextIteratorCopyableText::set(UChar singleCharacter) |
| { |
| m_singleCharacter = singleCharacter; |
| m_string = String(); |
| m_offset = 0; |
| m_length = 0; |
| } |
| |
| void TextIteratorCopyableText::appendToStringBuilder(StringBuilder& builder) const |
| { |
| if (m_singleCharacter) |
| builder.append(m_singleCharacter); |
| else |
| builder.appendSubstring(m_string, m_offset, m_length); |
| } |
| |
| // -------- |
| |
| |
| TextIterator::TextIterator(Position start, Position end, TextIteratorBehavior behavior) |
| : m_behavior(behavior) |
| { |
| if (start.isNull() || end.isNull()) |
| return; |
| ASSERT(comparePositions(start, end) <= 0); |
| |
| RELEASE_ASSERT(behavior & TextIteratorTraversesFlatTree || start.treeScope() == end.treeScope()); |
| |
| start.document()->updateLayoutIgnorePendingStylesheets(); |
| |
| // FIXME: Use Position / PositionIterator instead to avoid offset computation. |
| m_startContainer = start.containerNode(); |
| m_startOffset = start.computeOffsetInContainerNode(); |
| |
| m_endContainer = end.containerNode(); |
| m_endOffset = end.computeOffsetInContainerNode(); |
| |
| m_node = start.firstNode().get(); |
| if (!m_node) |
| return; |
| |
| init(); |
| } |
| |
| TextIterator::TextIterator(const Range* range, TextIteratorBehavior behavior) |
| : m_behavior(behavior) |
| { |
| if (!range) |
| return; |
| |
| range->ownerDocument().updateLayoutIgnorePendingStylesheets(); |
| |
| m_startContainer = &range->startContainer(); |
| |
| // Callers should be handing us well-formed ranges. If we discover that this isn't |
| // the case, we could consider changing this assertion to an early return. |
| ASSERT(range->boundaryPointsValid()); |
| |
| m_startOffset = range->startOffset(); |
| m_endContainer = &range->endContainer(); |
| m_endOffset = range->endOffset(); |
| |
| m_node = range->firstNode(); |
| if (!m_node) |
| return; |
| |
| init(); |
| } |
| |
| void TextIterator::init() |
| { |
| if (isClippedByFrameAncestor(m_node->document(), m_behavior)) |
| return; |
| |
| setUpFullyClippedStack(m_fullyClippedStack, *m_node); |
| |
| m_offset = m_node == m_startContainer ? m_startOffset : 0; |
| |
| m_pastEndNode = nextInPreOrderCrossingShadowBoundaries(*m_endContainer, m_endOffset); |
| |
| m_positionNode = m_node; |
| |
| advance(); |
| } |
| |
| TextIterator::~TextIterator() = default; |
| |
| // FIXME: Use ComposedTreeIterator instead. These functions are more expensive because they might do O(n) work. |
| static inline Node* firstChild(TextIteratorBehavior options, Node& node) |
| { |
| if (UNLIKELY(options & TextIteratorTraversesFlatTree)) |
| return firstChildInComposedTreeIgnoringUserAgentShadow(node); |
| return node.firstChild(); |
| } |
| |
| static inline Node* nextSibling(TextIteratorBehavior options, Node& node) |
| { |
| if (UNLIKELY(options & TextIteratorTraversesFlatTree)) |
| return nextSiblingInComposedTreeIgnoringUserAgentShadow(node); |
| return node.nextSibling(); |
| } |
| |
| static inline Node* nextNode(TextIteratorBehavior options, Node& node) |
| { |
| if (UNLIKELY(options & TextIteratorTraversesFlatTree)) |
| return nextInComposedTreeIgnoringUserAgentShadow(node); |
| return NodeTraversal::next(node); |
| } |
| |
| static inline bool isDescendantOf(TextIteratorBehavior options, Node& node, Node& possibleAncestor) |
| { |
| if (UNLIKELY(options & TextIteratorTraversesFlatTree)) |
| return node.isDescendantOrShadowDescendantOf(&possibleAncestor); |
| return node.isDescendantOf(&possibleAncestor); |
| } |
| |
| static inline Node* parentNodeOrShadowHost(TextIteratorBehavior options, Node& node) |
| { |
| if (UNLIKELY(options & TextIteratorTraversesFlatTree)) |
| return node.parentInComposedTree(); |
| return node.parentOrShadowHostNode(); |
| } |
| |
| static inline bool hasDisplayContents(Node& node) |
| { |
| return is<Element>(node) && downcast<Element>(node).hasDisplayContents(); |
| } |
| |
| void TextIterator::advance() |
| { |
| ASSERT(!atEnd()); |
| |
| // reset the run information |
| m_positionNode = nullptr; |
| m_copyableText.reset(); |
| m_text = StringView(); |
| |
| // handle remembered node that needed a newline after the text node's newline |
| if (m_nodeForAdditionalNewline) { |
| // Emit the extra newline, and position it *inside* m_node, after m_node's |
| // contents, in case it's a block, in the same way that we position the first |
| // newline. The range for the emitted newline should start where the line |
| // break begins. |
| // FIXME: It would be cleaner if we emitted two newlines during the last |
| // iteration, instead of using m_needsAnotherNewline. |
| emitCharacter('\n', *m_nodeForAdditionalNewline->parentNode(), m_nodeForAdditionalNewline, 1, 1); |
| m_nodeForAdditionalNewline = nullptr; |
| return; |
| } |
| |
| if (!m_textBox && m_remainingTextBox) { |
| m_textBox = m_remainingTextBox; |
| m_remainingTextBox = { }; |
| m_firstLetterText = { }; |
| m_offset = 0; |
| } |
| // handle remembered text box |
| if (m_textBox) { |
| handleTextBox(); |
| if (m_positionNode) |
| return; |
| } |
| |
| while (m_node && m_node != m_pastEndNode) { |
| // if the range ends at offset 0 of an element, represent the |
| // position, but not the content, of that element e.g. if the |
| // node is a blockflow element, emit a newline that |
| // precedes the element |
| if (m_node == m_endContainer && !m_endOffset) { |
| representNodeOffsetZero(); |
| m_node = nullptr; |
| return; |
| } |
| |
| auto* renderer = m_node->renderer(); |
| if (!m_handledNode) { |
| if (!renderer) { |
| m_handledNode = true; |
| m_handledChildren = !hasDisplayContents(*m_node); |
| } else { |
| // handle current node according to its type |
| if (renderer->isText() && m_node->isTextNode()) |
| m_handledNode = handleTextNode(); |
| else if (isRendererReplacedElement(renderer)) |
| m_handledNode = handleReplacedElement(); |
| else |
| m_handledNode = handleNonTextNode(); |
| if (m_positionNode) |
| return; |
| } |
| } |
| |
| // find a new current node to handle in depth-first manner, |
| // calling exitNode() as we come back thru a parent node |
| Node* next = m_handledChildren ? nullptr : firstChild(m_behavior, *m_node); |
| m_offset = 0; |
| if (!next) { |
| next = nextSibling(m_behavior, *m_node); |
| if (!next) { |
| bool pastEnd = nextNode(m_behavior, *m_node) == m_pastEndNode; |
| Node* parentNode = parentNodeOrShadowHost(m_behavior, *m_node); |
| while (!next && parentNode) { |
| if ((pastEnd && parentNode == m_endContainer) || isDescendantOf(m_behavior, *m_endContainer, *parentNode)) |
| return; |
| bool haveRenderer = m_node->renderer(); |
| Node* exitedNode = m_node; |
| m_node = parentNode; |
| m_fullyClippedStack.pop(); |
| parentNode = parentNodeOrShadowHost(m_behavior, *m_node); |
| if (haveRenderer) |
| exitNode(exitedNode); |
| if (m_positionNode) { |
| m_handledNode = true; |
| m_handledChildren = true; |
| return; |
| } |
| next = nextSibling(m_behavior, *m_node); |
| if (next && m_node->renderer()) |
| exitNode(m_node); |
| } |
| } |
| m_fullyClippedStack.pop(); |
| } |
| |
| // set the new current node |
| m_node = next; |
| if (m_node) |
| pushFullyClippedState(m_fullyClippedStack, *m_node); |
| m_handledNode = false; |
| m_handledChildren = false; |
| m_handledFirstLetter = false; |
| m_firstLetterText = nullptr; |
| |
| // how would this ever be? |
| if (m_positionNode) |
| return; |
| } |
| } |
| |
| static bool hasVisibleTextNode(RenderText& renderer) |
| { |
| if (renderer.style().visibility() == Visibility::Visible) |
| return true; |
| if (is<RenderTextFragment>(renderer)) { |
| if (auto firstLetter = downcast<RenderTextFragment>(renderer).firstLetter()) { |
| if (firstLetter->style().visibility() == Visibility::Visible) |
| return true; |
| } |
| } |
| return false; |
| } |
| |
| bool TextIterator::handleTextNode() |
| { |
| Text& textNode = downcast<Text>(*m_node); |
| |
| if (m_fullyClippedStack.top() && !(m_behavior & TextIteratorIgnoresStyleVisibility)) |
| return false; |
| |
| auto& renderer = *textNode.renderer(); |
| m_lastTextNode = &textNode; |
| String rendererText = renderer.text(); |
| |
| // handle pre-formatted text |
| if (!renderer.style().collapseWhiteSpace()) { |
| int runStart = m_offset; |
| if (m_lastTextNodeEndedWithCollapsedSpace && hasVisibleTextNode(renderer)) { |
| emitCharacter(' ', textNode, nullptr, runStart, runStart); |
| return false; |
| } |
| if (!m_handledFirstLetter && is<RenderTextFragment>(renderer) && !m_offset) { |
| handleTextNodeFirstLetter(downcast<RenderTextFragment>(renderer)); |
| if (m_firstLetterText) { |
| String firstLetter = m_firstLetterText->text(); |
| emitText(textNode, *m_firstLetterText, m_offset, m_offset + firstLetter.length()); |
| m_firstLetterText = nullptr; |
| m_textBox = { }; |
| return false; |
| } |
| } |
| if (renderer.style().visibility() != Visibility::Visible && !(m_behavior & TextIteratorIgnoresStyleVisibility)) |
| return false; |
| int rendererTextLength = rendererText.length(); |
| int end = (&textNode == m_endContainer) ? m_endOffset : INT_MAX; |
| int runEnd = std::min(rendererTextLength, end); |
| |
| if (runStart >= runEnd) |
| return true; |
| |
| emitText(textNode, renderer, runStart, runEnd); |
| return true; |
| } |
| |
| m_textBox = LineLayoutTraversal::firstTextBoxInTextOrderFor(renderer); |
| |
| bool shouldHandleFirstLetter = !m_handledFirstLetter && is<RenderTextFragment>(renderer) && !m_offset; |
| if (shouldHandleFirstLetter) |
| handleTextNodeFirstLetter(downcast<RenderTextFragment>(renderer)); |
| |
| if (!m_textBox && rendererText.length() && !shouldHandleFirstLetter) { |
| if (renderer.style().visibility() != Visibility::Visible && !(m_behavior & TextIteratorIgnoresStyleVisibility)) |
| return false; |
| m_lastTextNodeEndedWithCollapsedSpace = true; // entire block is collapsed space |
| return true; |
| } |
| |
| handleTextBox(); |
| return true; |
| } |
| |
| void TextIterator::handleTextBox() |
| { |
| Text& textNode = downcast<Text>(*m_node); |
| |
| auto& renderer = m_firstLetterText ? *m_firstLetterText : *textNode.renderer(); |
| if (renderer.style().visibility() != Visibility::Visible && !(m_behavior & TextIteratorIgnoresStyleVisibility)) { |
| m_textBox = { }; |
| return; |
| } |
| |
| auto firstTextBox = LineLayoutTraversal::firstTextBoxInTextOrderFor(renderer); |
| |
| String rendererText = renderer.text(); |
| unsigned start = m_offset; |
| unsigned end = (&textNode == m_endContainer) ? static_cast<unsigned>(m_endOffset) : UINT_MAX; |
| while (m_textBox) { |
| unsigned textBoxStart = m_textBox->localStartOffset(); |
| unsigned runStart = std::max(textBoxStart, start); |
| |
| // Check for collapsed space at the start of this run. |
| bool needSpace = m_lastTextNodeEndedWithCollapsedSpace || (m_textBox == firstTextBox && textBoxStart == runStart && runStart); |
| if (needSpace && !renderer.style().isCollapsibleWhiteSpace(m_lastCharacter) && m_lastCharacter) { |
| if (m_lastTextNode == &textNode && runStart && rendererText[runStart - 1] == ' ') { |
| unsigned spaceRunStart = runStart - 1; |
| while (spaceRunStart && rendererText[spaceRunStart - 1] == ' ') |
| --spaceRunStart; |
| emitText(textNode, renderer, spaceRunStart, spaceRunStart + 1); |
| } else |
| emitCharacter(' ', textNode, nullptr, runStart, runStart); |
| return; |
| } |
| unsigned textBoxEnd = textBoxStart + m_textBox->length(); |
| unsigned runEnd = std::min(textBoxEnd, end); |
| |
| // Determine what the next text box will be, but don't advance yet |
| auto nextTextBox = m_textBox; |
| nextTextBox.traverseNextInTextOrder(); |
| |
| if (runStart < runEnd) { |
| auto isNewlineOrTab = [&](UChar character) { |
| return character == '\n' || character == '\t'; |
| }; |
| // Handle either a single newline or tab character (which becomes a space), |
| // or a run of characters that does not include newlines or tabs. |
| // This effectively translates newlines and tabs to spaces without copying the text. |
| if (isNewlineOrTab(rendererText[runStart])) { |
| emitCharacter(' ', textNode, nullptr, runStart, runStart + 1); |
| m_offset = runStart + 1; |
| } else { |
| auto subrunEnd = runStart + 1; |
| for (; subrunEnd < runEnd; ++subrunEnd) { |
| if (isNewlineOrTab(rendererText[subrunEnd])) |
| break; |
| } |
| if (subrunEnd == runEnd && (m_behavior & TextIteratorBehavesAsIfNodesFollowing)) { |
| bool lastSpaceCollapsedByNextNonTextBox = !nextTextBox && rendererText.length() > subrunEnd && rendererText[subrunEnd] == ' '; |
| if (lastSpaceCollapsedByNextNonTextBox) |
| ++subrunEnd; // runEnd stopped before last space. Increment by one to restore the space. |
| } |
| m_offset = subrunEnd; |
| emitText(textNode, renderer, runStart, subrunEnd); |
| } |
| |
| // If we are doing a subrun that doesn't go to the end of the text box, |
| // come back again to finish handling this text box; don't advance to the next one. |
| if (static_cast<unsigned>(m_positionEndOffset) < textBoxEnd) |
| return; |
| |
| // Advance and return |
| unsigned nextRunStart = nextTextBox ? nextTextBox->localStartOffset() : rendererText.length(); |
| if (nextRunStart > runEnd) |
| m_lastTextNodeEndedWithCollapsedSpace = true; // collapsed space between runs or at the end |
| m_textBox = nextTextBox; |
| return; |
| } |
| // Advance and continue |
| m_textBox = nextTextBox; |
| } |
| if (!m_textBox && m_remainingTextBox) { |
| m_textBox = m_remainingTextBox; |
| m_remainingTextBox = { }; |
| m_firstLetterText = { }; |
| m_offset = 0; |
| handleTextBox(); |
| } |
| } |
| |
| static inline RenderText* firstRenderTextInFirstLetter(RenderBoxModelObject* firstLetter) |
| { |
| if (!firstLetter) |
| return nullptr; |
| |
| // FIXME: Should this check descendent objects? |
| return childrenOfType<RenderText>(*firstLetter).first(); |
| } |
| |
| void TextIterator::handleTextNodeFirstLetter(RenderTextFragment& renderer) |
| { |
| if (auto* firstLetter = renderer.firstLetter()) { |
| if (firstLetter->style().visibility() != Visibility::Visible && !(m_behavior & TextIteratorIgnoresStyleVisibility)) |
| return; |
| if (auto* firstLetterText = firstRenderTextInFirstLetter(firstLetter)) { |
| m_handledFirstLetter = true; |
| m_remainingTextBox = m_textBox; |
| m_textBox = LineLayoutTraversal::firstTextBoxInTextOrderFor(*firstLetterText); |
| m_firstLetterText = firstLetterText; |
| } |
| } |
| m_handledFirstLetter = true; |
| } |
| |
| bool TextIterator::handleReplacedElement() |
| { |
| if (m_fullyClippedStack.top()) |
| return false; |
| |
| auto& renderer = *m_node->renderer(); |
| if (renderer.style().visibility() != Visibility::Visible && !(m_behavior & TextIteratorIgnoresStyleVisibility)) |
| return false; |
| |
| if (m_lastTextNodeEndedWithCollapsedSpace) { |
| emitCharacter(' ', *m_lastTextNode->parentNode(), m_lastTextNode, 1, 1); |
| return false; |
| } |
| |
| if ((m_behavior & TextIteratorEntersTextControls) && is<RenderTextControl>(renderer)) { |
| if (auto innerTextElement = downcast<RenderTextControl>(renderer).textFormControlElement().innerTextElement()) { |
| m_node = innerTextElement->containingShadowRoot(); |
| pushFullyClippedState(m_fullyClippedStack, *m_node); |
| m_offset = 0; |
| return false; |
| } |
| } |
| |
| m_hasEmitted = true; |
| |
| if ((m_behavior & TextIteratorEmitsObjectReplacementCharacters) && renderer.isReplaced()) { |
| emitCharacter(objectReplacementCharacter, *m_node->parentNode(), m_node, 0, 1); |
| // Don't process subtrees for embedded objects. If the text there is required, |
| // it must be explicitly asked by specifying a range falling inside its boundaries. |
| m_handledChildren = true; |
| return true; |
| } |
| |
| if (m_behavior & TextIteratorEmitsCharactersBetweenAllVisiblePositions) { |
| // We want replaced elements to behave like punctuation for boundary |
| // finding, and to simply take up space for the selection preservation |
| // code in moveParagraphs, so we use a comma. |
| emitCharacter(',', *m_node->parentNode(), m_node, 0, 1); |
| return true; |
| } |
| |
| m_positionNode = m_node->parentNode(); |
| m_positionOffsetBaseNode = m_node; |
| m_positionStartOffset = 0; |
| m_positionEndOffset = 1; |
| |
| if ((m_behavior & TextIteratorEmitsImageAltText) && is<RenderImage>(renderer)) { |
| String altText = downcast<RenderImage>(renderer).altText(); |
| if (unsigned length = altText.length()) { |
| m_lastCharacter = altText[length - 1]; |
| m_copyableText.set(WTFMove(altText)); |
| m_text = m_copyableText.text(); |
| return true; |
| } |
| } |
| |
| m_copyableText.reset(); |
| m_text = StringView(); |
| m_lastCharacter = 0; |
| return true; |
| } |
| |
| static bool shouldEmitTabBeforeNode(Node& node) |
| { |
| auto* renderer = node.renderer(); |
| |
| // Table cells are delimited by tabs. |
| if (!renderer || !isTableCell(&node)) |
| return false; |
| |
| // Want a tab before every cell other than the first one. |
| RenderTableCell& cell = downcast<RenderTableCell>(*renderer); |
| RenderTable* table = cell.table(); |
| return table && (table->cellBefore(&cell) || table->cellAbove(&cell)); |
| } |
| |
| static bool shouldEmitNewlineForNode(Node* node, bool emitsOriginalText) |
| { |
| auto* renderer = node->renderer(); |
| if (!(renderer ? renderer->isBR() : node->hasTagName(brTag))) |
| return false; |
| return emitsOriginalText || !(node->isInShadowTree() && is<HTMLInputElement>(*node->shadowHost())); |
| } |
| |
| static bool hasHeaderTag(HTMLElement& element) |
| { |
| return element.hasTagName(h1Tag) |
| || element.hasTagName(h2Tag) |
| || element.hasTagName(h3Tag) |
| || element.hasTagName(h4Tag) |
| || element.hasTagName(h5Tag) |
| || element.hasTagName(h6Tag); |
| } |
| |
| static bool shouldEmitNewlinesBeforeAndAfterNode(Node& node) |
| { |
| // Block flow (versus inline flow) is represented by having |
| // a newline both before and after the element. |
| auto* renderer = node.renderer(); |
| if (!renderer) { |
| if (!is<HTMLElement>(node)) |
| return false; |
| auto& element = downcast<HTMLElement>(node); |
| return hasHeaderTag(element) |
| || element.hasTagName(blockquoteTag) |
| || element.hasTagName(ddTag) |
| || element.hasTagName(divTag) |
| || element.hasTagName(dlTag) |
| || element.hasTagName(dtTag) |
| || element.hasTagName(hrTag) |
| || element.hasTagName(liTag) |
| || element.hasTagName(listingTag) |
| || element.hasTagName(olTag) |
| || element.hasTagName(pTag) |
| || element.hasTagName(preTag) |
| || element.hasTagName(trTag) |
| || element.hasTagName(ulTag); |
| } |
| |
| // Need to make an exception for table cells, because they are blocks, but we |
| // want them tab-delimited rather than having newlines before and after. |
| if (isTableCell(&node)) |
| return false; |
| |
| // Need to make an exception for table row elements, because they are neither |
| // "inline" or "RenderBlock", but we want newlines for them. |
| if (is<RenderTableRow>(*renderer)) { |
| RenderTable* table = downcast<RenderTableRow>(*renderer).table(); |
| if (table && !table->isInline()) |
| return true; |
| } |
| |
| return !renderer->isInline() |
| && is<RenderBlock>(*renderer) |
| && !renderer->isFloatingOrOutOfFlowPositioned() |
| && !renderer->isBody() |
| && !renderer->isRubyText(); |
| } |
| |
| static bool shouldEmitNewlineAfterNode(Node& node, bool emitsCharactersBetweenAllVisiblePositions = false) |
| { |
| // FIXME: It should be better but slower to create a VisiblePosition here. |
| if (!shouldEmitNewlinesBeforeAndAfterNode(node)) |
| return false; |
| |
| // Don't emit a new line at the end of the document unless we're matching the behavior of VisiblePosition. |
| if (emitsCharactersBetweenAllVisiblePositions) |
| return true; |
| Node* subsequentNode = &node; |
| while ((subsequentNode = NodeTraversal::nextSkippingChildren(*subsequentNode))) { |
| if (subsequentNode->renderer()) |
| return true; |
| } |
| return false; |
| } |
| |
| static bool shouldEmitNewlineBeforeNode(Node& node) |
| { |
| return shouldEmitNewlinesBeforeAndAfterNode(node); |
| } |
| |
| static bool shouldEmitExtraNewlineForNode(Node& node) |
| { |
| // When there is a significant collapsed bottom margin, emit an extra |
| // newline for a more realistic result. We end up getting the right |
| // result even without margin collapsing. For example: <div><p>text</p></div> |
| // will work right even if both the <div> and the <p> have bottom margins. |
| |
| auto* renderer = node.renderer(); |
| if (!is<RenderBox>(renderer)) |
| return false; |
| |
| // NOTE: We only do this for a select set of nodes, and WinIE appears not to do this at all. |
| if (!is<HTMLElement>(node)) |
| return false; |
| |
| HTMLElement& element = downcast<HTMLElement>(node); |
| if (!hasHeaderTag(element) && !is<HTMLParagraphElement>(element)) |
| return false; |
| |
| auto& renderBox = downcast<RenderBox>(*renderer); |
| if (!renderBox.height()) |
| return false; |
| |
| int bottomMargin = renderBox.collapsedMarginAfter(); |
| int fontSize = renderBox.style().fontDescription().computedPixelSize(); |
| return bottomMargin * 2 >= fontSize; |
| } |
| |
| static int collapsedSpaceLength(RenderText& renderer, int textEnd) |
| { |
| StringImpl& text = renderer.text(); |
| unsigned length = text.length(); |
| for (unsigned i = textEnd; i < length; ++i) { |
| if (!renderer.style().isCollapsibleWhiteSpace(text[i])) |
| return i - textEnd; |
| } |
| return length - textEnd; |
| } |
| |
| static int maxOffsetIncludingCollapsedSpaces(Node& node) |
| { |
| int offset = caretMaxOffset(node); |
| if (auto* renderer = node.renderer()) { |
| if (is<RenderText>(*renderer)) |
| offset += collapsedSpaceLength(downcast<RenderText>(*renderer), offset); |
| } |
| return offset; |
| } |
| |
| // Whether or not we should emit a character as we enter m_node (if it's a container) or as we hit it (if it's atomic). |
| bool TextIterator::shouldRepresentNodeOffsetZero() |
| { |
| if ((m_behavior & TextIteratorEmitsCharactersBetweenAllVisiblePositions) && m_node->renderer() && m_node->renderer()->isTable()) |
| return true; |
| |
| // Leave element positioned flush with start of a paragraph |
| // (e.g. do not insert tab before a table cell at the start of a paragraph) |
| if (m_lastCharacter == '\n') |
| return false; |
| |
| // Otherwise, show the position if we have emitted any characters |
| if (m_hasEmitted) |
| return true; |
| |
| // We've not emitted anything yet. Generally, there is no need for any positioning then. |
| // The only exception is when the element is visually not in the same line as |
| // the start of the range (e.g. the range starts at the end of the previous paragraph). |
| // NOTE: Creating VisiblePositions and comparing them is relatively expensive, so we |
| // make quicker checks to possibly avoid that. Another check that we could make is |
| // is whether the inline vs block flow changed since the previous visible element. |
| // I think we're already in a special enough case that that won't be needed, tho. |
| |
| // No character needed if this is the first node in the range. |
| if (m_node == m_startContainer) |
| return false; |
| |
| // If we are outside the start container's subtree, assume we need to emit. |
| // FIXME: m_startContainer could be an inline block |
| if (!m_node->isDescendantOf(m_startContainer)) |
| return true; |
| |
| // If we started as m_startContainer offset 0 and the current node is a descendant of |
| // the start container, we already had enough context to correctly decide whether to |
| // emit after a preceding block. We chose not to emit (m_hasEmitted is false), |
| // so don't second guess that now. |
| // NOTE: Is this really correct when m_node is not a leftmost descendant? Probably |
| // immaterial since we likely would have already emitted something by now. |
| if (m_startOffset == 0) |
| return false; |
| |
| // If this node is unrendered or invisible the VisiblePosition checks below won't have much meaning. |
| // Additionally, if the range we are iterating over contains huge sections of unrendered content, |
| // we would create VisiblePositions on every call to this function without this check. |
| if (!m_node->renderer() || m_node->renderer()->style().visibility() != Visibility::Visible |
| || (is<RenderBlockFlow>(*m_node->renderer()) && !downcast<RenderBlockFlow>(*m_node->renderer()).height() && !is<HTMLBodyElement>(*m_node))) |
| return false; |
| |
| // The startPos.isNotNull() check is needed because the start could be before the body, |
| // and in that case we'll get null. We don't want to put in newlines at the start in that case. |
| // The currPos.isNotNull() check is needed because positions in non-HTML content |
| // (like SVG) do not have visible positions, and we don't want to emit for them either. |
| VisiblePosition startPos = VisiblePosition(Position(m_startContainer, m_startOffset, Position::PositionIsOffsetInAnchor), DOWNSTREAM); |
| VisiblePosition currPos = VisiblePosition(positionBeforeNode(m_node), DOWNSTREAM); |
| return startPos.isNotNull() && currPos.isNotNull() && !inSameLine(startPos, currPos); |
| } |
| |
| bool TextIterator::shouldEmitSpaceBeforeAndAfterNode(Node& node) |
| { |
| return node.renderer() && node.renderer()->isTable() && (node.renderer()->isInline() || (m_behavior & TextIteratorEmitsCharactersBetweenAllVisiblePositions)); |
| } |
| |
| void TextIterator::representNodeOffsetZero() |
| { |
| // Emit a character to show the positioning of m_node. |
| |
| // When we haven't been emitting any characters, shouldRepresentNodeOffsetZero() can |
| // create VisiblePositions, which is expensive. So, we perform the inexpensive checks |
| // on m_node to see if it necessitates emitting a character first and will early return |
| // before encountering shouldRepresentNodeOffsetZero()s worse case behavior. |
| if (shouldEmitTabBeforeNode(*m_node)) { |
| if (shouldRepresentNodeOffsetZero()) |
| emitCharacter('\t', *m_node->parentNode(), m_node, 0, 0); |
| } else if (shouldEmitNewlineBeforeNode(*m_node)) { |
| if (shouldRepresentNodeOffsetZero()) |
| emitCharacter('\n', *m_node->parentNode(), m_node, 0, 0); |
| } else if (shouldEmitSpaceBeforeAndAfterNode(*m_node)) { |
| if (shouldRepresentNodeOffsetZero()) |
| emitCharacter(' ', *m_node->parentNode(), m_node, 0, 0); |
| } |
| } |
| |
| bool TextIterator::handleNonTextNode() |
| { |
| if (shouldEmitNewlineForNode(m_node, m_behavior & TextIteratorEmitsOriginalText)) |
| emitCharacter('\n', *m_node->parentNode(), m_node, 0, 1); |
| else if ((m_behavior & TextIteratorEmitsCharactersBetweenAllVisiblePositions) && m_node->renderer() && m_node->renderer()->isHR()) |
| emitCharacter(' ', *m_node->parentNode(), m_node, 0, 1); |
| else |
| representNodeOffsetZero(); |
| |
| return true; |
| } |
| |
| void TextIterator::exitNode(Node* exitedNode) |
| { |
| // prevent emitting a newline when exiting a collapsed block at beginning of the range |
| // FIXME: !m_hasEmitted does not necessarily mean there was a collapsed block... it could |
| // have been an hr (e.g.). Also, a collapsed block could have height (e.g. a table) and |
| // therefore look like a blank line. |
| if (!m_hasEmitted) |
| return; |
| |
| // Emit with a position *inside* m_node, after m_node's contents, in |
| // case it is a block, because the run should start where the |
| // emitted character is positioned visually. |
| Node* baseNode = exitedNode; |
| // FIXME: This shouldn't require the m_lastTextNode to be true, but we can't change that without making |
| // the logic in _web_attributedStringFromRange match. We'll get that for free when we switch to use |
| // TextIterator in _web_attributedStringFromRange. |
| // See <rdar://problem/5428427> for an example of how this mismatch will cause problems. |
| if (m_lastTextNode && shouldEmitNewlineAfterNode(*m_node, m_behavior & TextIteratorEmitsCharactersBetweenAllVisiblePositions)) { |
| // use extra newline to represent margin bottom, as needed |
| bool addNewline = shouldEmitExtraNewlineForNode(*m_node); |
| |
| // FIXME: We need to emit a '\n' as we leave an empty block(s) that |
| // contain a VisiblePosition when doing selection preservation. |
| if (m_lastCharacter != '\n') { |
| // insert a newline with a position following this block's contents. |
| emitCharacter('\n', *baseNode->parentNode(), baseNode, 1, 1); |
| // remember whether to later add a newline for the current node |
| ASSERT(!m_nodeForAdditionalNewline); |
| if (addNewline) |
| m_nodeForAdditionalNewline = baseNode; |
| } else if (addNewline) |
| // insert a newline with a position following this block's contents. |
| emitCharacter('\n', *baseNode->parentNode(), baseNode, 1, 1); |
| } |
| |
| // If nothing was emitted, see if we need to emit a space. |
| if (!m_positionNode && shouldEmitSpaceBeforeAndAfterNode(*m_node)) |
| emitCharacter(' ', *baseNode->parentNode(), baseNode, 1, 1); |
| } |
| |
| void TextIterator::emitCharacter(UChar character, Node& characterNode, Node* offsetBaseNode, int textStartOffset, int textEndOffset) |
| { |
| m_hasEmitted = true; |
| |
| // remember information with which to construct the TextIterator::range() |
| m_positionNode = &characterNode; |
| m_positionOffsetBaseNode = offsetBaseNode; |
| m_positionStartOffset = textStartOffset; |
| m_positionEndOffset = textEndOffset; |
| |
| m_copyableText.set(character); |
| m_text = m_copyableText.text(); |
| m_lastCharacter = character; |
| m_lastTextNodeEndedWithCollapsedSpace = false; |
| } |
| |
| void TextIterator::emitText(Text& textNode, RenderText& renderer, int textStartOffset, int textEndOffset) |
| { |
| ASSERT(textStartOffset >= 0); |
| ASSERT(textEndOffset >= 0); |
| ASSERT(textStartOffset <= textEndOffset); |
| |
| // FIXME: This probably yields the wrong offsets when text-transform: lowercase turns a single character into two characters. |
| String string = (m_behavior & TextIteratorEmitsOriginalText) ? renderer.originalText() |
| : ((m_behavior & TextIteratorEmitsTextsWithoutTranscoding) ? renderer.textWithoutConvertingBackslashToYenSymbol() : renderer.text()); |
| |
| ASSERT(string.length() >= static_cast<unsigned>(textEndOffset)); |
| |
| m_positionNode = &textNode; |
| m_positionOffsetBaseNode = nullptr; |
| m_positionStartOffset = textStartOffset; |
| m_positionEndOffset = textEndOffset; |
| |
| m_lastCharacter = string[textEndOffset - 1]; |
| m_copyableText.set(WTFMove(string), textStartOffset, textEndOffset - textStartOffset); |
| m_text = m_copyableText.text(); |
| |
| m_lastTextNodeEndedWithCollapsedSpace = false; |
| m_hasEmitted = true; |
| } |
| |
| Ref<Range> TextIterator::range() const |
| { |
| ASSERT(!atEnd()); |
| |
| // use the current run information, if we have it |
| if (m_positionOffsetBaseNode) { |
| unsigned index = m_positionOffsetBaseNode->computeNodeIndex(); |
| m_positionStartOffset += index; |
| m_positionEndOffset += index; |
| m_positionOffsetBaseNode = nullptr; |
| } |
| return Range::create(m_positionNode->document(), m_positionNode, m_positionStartOffset, m_positionNode, m_positionEndOffset); |
| } |
| |
| Node* TextIterator::node() const |
| { |
| Ref<Range> textRange = range(); |
| |
| Node& node = textRange->startContainer(); |
| if (node.isCharacterDataNode()) |
| return &node; |
| |
| return node.traverseToChildAt(textRange->startOffset()); |
| } |
| |
| // -------- |
| |
| SimplifiedBackwardsTextIterator::SimplifiedBackwardsTextIterator(const Range& range) |
| { |
| range.ownerDocument().updateLayoutIgnorePendingStylesheets(); |
| |
| Node* startNode = &range.startContainer(); |
| Node* endNode = &range.endContainer(); |
| int startOffset = range.startOffset(); |
| int endOffset = range.endOffset(); |
| |
| if (!startNode->isCharacterDataNode()) { |
| if (startOffset >= 0 && startOffset < static_cast<int>(startNode->countChildNodes())) { |
| startNode = startNode->traverseToChildAt(startOffset); |
| startOffset = 0; |
| } |
| } |
| if (!endNode->isCharacterDataNode()) { |
| if (endOffset > 0 && endOffset <= static_cast<int>(endNode->countChildNodes())) { |
| endNode = endNode->traverseToChildAt(endOffset - 1); |
| endOffset = lastOffsetInNode(endNode); |
| } |
| } |
| |
| m_node = endNode; |
| setUpFullyClippedStack(m_fullyClippedStack, *m_node); |
| m_offset = endOffset; |
| m_handledNode = false; |
| m_handledChildren = endOffset == 0; |
| |
| m_startContainer = startNode; |
| m_startOffset = startOffset; |
| m_endContainer = endNode; |
| m_endOffset = endOffset; |
| |
| m_positionNode = endNode; |
| |
| m_lastTextNode = nullptr; |
| m_lastCharacter = '\n'; |
| |
| m_havePassedStartContainer = false; |
| |
| advance(); |
| } |
| |
| void SimplifiedBackwardsTextIterator::advance() |
| { |
| ASSERT(!atEnd()); |
| |
| m_positionNode = nullptr; |
| m_copyableText.reset(); |
| m_text = StringView(); |
| |
| while (m_node && !m_havePassedStartContainer) { |
| // Don't handle node if we start iterating at [node, 0]. |
| if (!m_handledNode && !(m_node == m_endContainer && !m_endOffset)) { |
| auto* renderer = m_node->renderer(); |
| if (renderer && renderer->isText() && m_node->isTextNode()) { |
| if (renderer->style().visibility() == Visibility::Visible && m_offset > 0) |
| m_handledNode = handleTextNode(); |
| } else if (renderer && (renderer->isImage() || renderer->isWidget())) { |
| if (renderer->style().visibility() == Visibility::Visible && m_offset > 0) |
| m_handledNode = handleReplacedElement(); |
| } else |
| m_handledNode = handleNonTextNode(); |
| if (m_positionNode) |
| return; |
| } |
| |
| if (!m_handledChildren && m_node->hasChildNodes()) { |
| m_node = m_node->lastChild(); |
| pushFullyClippedState(m_fullyClippedStack, *m_node); |
| } else { |
| // Exit empty containers as we pass over them or containers |
| // where [container, 0] is where we started iterating. |
| if (!m_handledNode && canHaveChildrenForEditing(*m_node) && m_node->parentNode() && (!m_node->lastChild() || (m_node == m_endContainer && !m_endOffset))) { |
| exitNode(); |
| if (m_positionNode) { |
| m_handledNode = true; |
| m_handledChildren = true; |
| return; |
| } |
| } |
| |
| // Exit all other containers. |
| while (!m_node->previousSibling()) { |
| if (!advanceRespectingRange(m_node->parentOrShadowHostNode())) |
| break; |
| m_fullyClippedStack.pop(); |
| exitNode(); |
| if (m_positionNode) { |
| m_handledNode = true; |
| m_handledChildren = true; |
| return; |
| } |
| } |
| |
| m_fullyClippedStack.pop(); |
| if (advanceRespectingRange(m_node->previousSibling())) |
| pushFullyClippedState(m_fullyClippedStack, *m_node); |
| else |
| m_node = nullptr; |
| } |
| |
| // For the purpose of word boundary detection, |
| // we should iterate all visible text and trailing (collapsed) whitespaces. |
| m_offset = m_node ? maxOffsetIncludingCollapsedSpaces(*m_node) : 0; |
| m_handledNode = false; |
| m_handledChildren = false; |
| |
| if (m_positionNode) |
| return; |
| } |
| } |
| |
| bool SimplifiedBackwardsTextIterator::handleTextNode() |
| { |
| Text& textNode = downcast<Text>(*m_node); |
| |
| m_lastTextNode = &textNode; |
| |
| int startOffset; |
| int offsetInNode; |
| RenderText* renderer = handleFirstLetter(startOffset, offsetInNode); |
| if (!renderer) |
| return true; |
| |
| String text = renderer->text(); |
| if (!renderer->hasRenderedText() && text.length()) |
| return true; |
| |
| if (startOffset + offsetInNode == m_offset) { |
| ASSERT(!m_shouldHandleFirstLetter); |
| return true; |
| } |
| |
| m_positionEndOffset = m_offset; |
| m_offset = startOffset + offsetInNode; |
| m_positionNode = m_node; |
| m_positionStartOffset = m_offset; |
| |
| ASSERT(m_positionStartOffset < m_positionEndOffset); |
| ASSERT(m_positionStartOffset - offsetInNode >= 0); |
| ASSERT(m_positionEndOffset - offsetInNode > 0); |
| ASSERT(m_positionEndOffset - offsetInNode <= static_cast<int>(text.length())); |
| |
| m_lastCharacter = text[m_positionEndOffset - offsetInNode - 1]; |
| m_copyableText.set(WTFMove(text), m_positionStartOffset - offsetInNode, m_positionEndOffset - m_positionStartOffset); |
| m_text = m_copyableText.text(); |
| |
| return !m_shouldHandleFirstLetter; |
| } |
| |
| RenderText* SimplifiedBackwardsTextIterator::handleFirstLetter(int& startOffset, int& offsetInNode) |
| { |
| RenderText& renderer = downcast<RenderText>(*m_node->renderer()); |
| startOffset = (m_node == m_startContainer) ? m_startOffset : 0; |
| |
| if (!is<RenderTextFragment>(renderer)) { |
| offsetInNode = 0; |
| return &renderer; |
| } |
| |
| RenderTextFragment& fragment = downcast<RenderTextFragment>(renderer); |
| int offsetAfterFirstLetter = fragment.start(); |
| if (startOffset >= offsetAfterFirstLetter) { |
| ASSERT(!m_shouldHandleFirstLetter); |
| offsetInNode = offsetAfterFirstLetter; |
| return &renderer; |
| } |
| |
| if (!m_shouldHandleFirstLetter && startOffset + offsetAfterFirstLetter < m_offset) { |
| m_shouldHandleFirstLetter = true; |
| offsetInNode = offsetAfterFirstLetter; |
| return &renderer; |
| } |
| |
| m_shouldHandleFirstLetter = false; |
| offsetInNode = 0; |
| RenderText* firstLetterRenderer = firstRenderTextInFirstLetter(fragment.firstLetter()); |
| |
| m_offset = firstLetterRenderer->caretMaxOffset(); |
| m_offset += collapsedSpaceLength(*firstLetterRenderer, m_offset); |
| |
| return firstLetterRenderer; |
| } |
| |
| bool SimplifiedBackwardsTextIterator::handleReplacedElement() |
| { |
| unsigned index = m_node->computeNodeIndex(); |
| // We want replaced elements to behave like punctuation for boundary |
| // finding, and to simply take up space for the selection preservation |
| // code in moveParagraphs, so we use a comma. Unconditionally emit |
| // here because this iterator is only used for boundary finding. |
| emitCharacter(',', *m_node->parentNode(), index, index + 1); |
| return true; |
| } |
| |
| bool SimplifiedBackwardsTextIterator::handleNonTextNode() |
| { |
| // We can use a linefeed in place of a tab because this simple iterator is only used to |
| // find boundaries, not actual content. A linefeed breaks words, sentences, and paragraphs. |
| if (shouldEmitNewlineForNode(m_node, m_behavior & TextIteratorEmitsOriginalText) || shouldEmitNewlineAfterNode(*m_node) || shouldEmitTabBeforeNode(*m_node)) { |
| if (m_lastCharacter != '\n') { |
| // Corresponds to the same check in TextIterator::exitNode. |
| unsigned index = m_node->computeNodeIndex(); |
| // The start of this emitted range is wrong. Ensuring correctness would require |
| // VisiblePositions and so would be slow. previousBoundary expects this. |
| emitCharacter('\n', *m_node->parentNode(), index + 1, index + 1); |
| } |
| } |
| return true; |
| } |
| |
| void SimplifiedBackwardsTextIterator::exitNode() |
| { |
| if (shouldEmitNewlineForNode(m_node, m_behavior & TextIteratorEmitsOriginalText) || shouldEmitNewlineBeforeNode(*m_node) || shouldEmitTabBeforeNode(*m_node)) { |
| // The start of this emitted range is wrong. Ensuring correctness would require |
| // VisiblePositions and so would be slow. previousBoundary expects this. |
| emitCharacter('\n', *m_node, 0, 0); |
| } |
| } |
| |
| void SimplifiedBackwardsTextIterator::emitCharacter(UChar c, Node& node, int startOffset, int endOffset) |
| { |
| m_positionNode = &node; |
| m_positionStartOffset = startOffset; |
| m_positionEndOffset = endOffset; |
| m_copyableText.set(c); |
| m_text = m_copyableText.text(); |
| m_lastCharacter = c; |
| } |
| |
| bool SimplifiedBackwardsTextIterator::advanceRespectingRange(Node* next) |
| { |
| if (!next) |
| return false; |
| m_havePassedStartContainer |= m_node == m_startContainer; |
| if (m_havePassedStartContainer) |
| return false; |
| m_node = next; |
| return true; |
| } |
| |
| Ref<Range> SimplifiedBackwardsTextIterator::range() const |
| { |
| ASSERT(!atEnd()); |
| |
| return Range::create(m_positionNode->document(), m_positionNode, m_positionStartOffset, m_positionNode, m_positionEndOffset); |
| } |
| |
| // -------- |
| |
| CharacterIterator::CharacterIterator(const Range& range, TextIteratorBehavior behavior) |
| : m_underlyingIterator(&range, behavior) |
| { |
| while (!atEnd() && !m_underlyingIterator.text().length()) |
| m_underlyingIterator.advance(); |
| } |
| |
| CharacterIterator::CharacterIterator(Position start, Position end, TextIteratorBehavior behavior) |
| : m_underlyingIterator(start, end, behavior) |
| { |
| while (!atEnd() && !m_underlyingIterator.text().length()) |
| m_underlyingIterator.advance(); |
| } |
| |
| Ref<Range> CharacterIterator::range() const |
| { |
| Ref<Range> range = m_underlyingIterator.range(); |
| if (!m_underlyingIterator.atEnd()) { |
| if (m_underlyingIterator.text().length() <= 1) { |
| ASSERT(m_runOffset == 0); |
| } else { |
| Node& node = range->startContainer(); |
| ASSERT(&node == &range->endContainer()); |
| int offset = range->startOffset() + m_runOffset; |
| range->setStart(node, offset); |
| range->setEnd(node, offset + 1); |
| } |
| } |
| return range; |
| } |
| |
| void CharacterIterator::advance(int count) |
| { |
| if (count <= 0) { |
| ASSERT(count == 0); |
| return; |
| } |
| |
| m_atBreak = false; |
| |
| // easy if there is enough left in the current m_underlyingIterator run |
| int remaining = m_underlyingIterator.text().length() - m_runOffset; |
| if (count < remaining) { |
| m_runOffset += count; |
| m_offset += count; |
| return; |
| } |
| |
| // exhaust the current m_underlyingIterator run |
| count -= remaining; |
| m_offset += remaining; |
| |
| // move to a subsequent m_underlyingIterator run |
| for (m_underlyingIterator.advance(); !atEnd(); m_underlyingIterator.advance()) { |
| int runLength = m_underlyingIterator.text().length(); |
| if (!runLength) |
| m_atBreak = true; |
| else { |
| // see whether this is m_underlyingIterator to use |
| if (count < runLength) { |
| m_runOffset = count; |
| m_offset += count; |
| return; |
| } |
| |
| // exhaust this m_underlyingIterator run |
| count -= runLength; |
| m_offset += runLength; |
| } |
| } |
| |
| // ran to the end of the m_underlyingIterator... no more runs left |
| m_atBreak = true; |
| m_runOffset = 0; |
| } |
| |
| static Ref<Range> characterSubrange(Document& document, CharacterIterator& it, int offset, int length) |
| { |
| it.advance(offset); |
| if (it.atEnd()) |
| return Range::create(document); |
| |
| Ref<Range> start = it.range(); |
| |
| if (length > 1) |
| it.advance(length - 1); |
| if (it.atEnd()) |
| return Range::create(document); |
| |
| Ref<Range> end = it.range(); |
| |
| return Range::create(document, &start->startContainer(), start->startOffset(), &end->endContainer(), end->endOffset()); |
| } |
| |
| BackwardsCharacterIterator::BackwardsCharacterIterator(const Range& range) |
| : m_underlyingIterator(range) |
| , m_offset(0) |
| , m_runOffset(0) |
| , m_atBreak(true) |
| { |
| while (!atEnd() && !m_underlyingIterator.text().length()) |
| m_underlyingIterator.advance(); |
| } |
| |
| Ref<Range> BackwardsCharacterIterator::range() const |
| { |
| Ref<Range> r = m_underlyingIterator.range(); |
| if (!m_underlyingIterator.atEnd()) { |
| if (m_underlyingIterator.text().length() <= 1) |
| ASSERT(m_runOffset == 0); |
| else { |
| Node& node = r->startContainer(); |
| ASSERT(&node == &r->endContainer()); |
| int offset = r->endOffset() - m_runOffset; |
| r->setStart(node, offset - 1); |
| r->setEnd(node, offset); |
| } |
| } |
| return r; |
| } |
| |
| void BackwardsCharacterIterator::advance(int count) |
| { |
| if (count <= 0) { |
| ASSERT(!count); |
| return; |
| } |
| |
| m_atBreak = false; |
| |
| int remaining = m_underlyingIterator.text().length() - m_runOffset; |
| if (count < remaining) { |
| m_runOffset += count; |
| m_offset += count; |
| return; |
| } |
| |
| count -= remaining; |
| m_offset += remaining; |
| |
| for (m_underlyingIterator.advance(); !atEnd(); m_underlyingIterator.advance()) { |
| int runLength = m_underlyingIterator.text().length(); |
| if (runLength == 0) |
| m_atBreak = true; |
| else { |
| if (count < runLength) { |
| m_runOffset = count; |
| m_offset += count; |
| return; |
| } |
| |
| count -= runLength; |
| m_offset += runLength; |
| } |
| } |
| |
| m_atBreak = true; |
| m_runOffset = 0; |
| } |
| |
| // -------- |
| |
| WordAwareIterator::WordAwareIterator(const Range& range) |
| : m_underlyingIterator(&range) |
| , m_didLookAhead(true) // so we consider the first chunk from the text iterator |
| { |
| advance(); // get in position over the first chunk of text |
| } |
| |
| // We're always in one of these modes: |
| // - The current chunk in the text iterator is our current chunk |
| // (typically its a piece of whitespace, or text that ended with whitespace) |
| // - The previous chunk in the text iterator is our current chunk |
| // (we looked ahead to the next chunk and found a word boundary) |
| // - We built up our own chunk of text from many chunks from the text iterator |
| |
| // FIXME: Performance could be bad for huge spans next to each other that don't fall on word boundaries. |
| |
| void WordAwareIterator::advance() |
| { |
| m_previousText.reset(); |
| m_buffer.clear(); |
| |
| // If last time we did a look-ahead, start with that looked-ahead chunk now |
| if (!m_didLookAhead) { |
| ASSERT(!m_underlyingIterator.atEnd()); |
| m_underlyingIterator.advance(); |
| } |
| m_didLookAhead = false; |
| |
| // Go to next non-empty chunk |
| while (!m_underlyingIterator.atEnd() && !m_underlyingIterator.text().length()) |
| m_underlyingIterator.advance(); |
| if (m_underlyingIterator.atEnd()) |
| return; |
| |
| while (1) { |
| // If this chunk ends in whitespace we can just use it as our chunk. |
| if (isSpaceOrNewline(m_underlyingIterator.text()[m_underlyingIterator.text().length() - 1])) |
| return; |
| |
| // If this is the first chunk that failed, save it in previousText before look ahead |
| if (m_buffer.isEmpty()) |
| m_previousText = m_underlyingIterator.copyableText(); |
| |
| // Look ahead to next chunk. If it is whitespace or a break, we can use the previous stuff |
| m_underlyingIterator.advance(); |
| if (m_underlyingIterator.atEnd() || !m_underlyingIterator.text().length() || isSpaceOrNewline(m_underlyingIterator.text()[0])) { |
| m_didLookAhead = true; |
| return; |
| } |
| |
| if (m_buffer.isEmpty()) { |
| // Start gobbling chunks until we get to a suitable stopping point |
| append(m_buffer, m_previousText.text()); |
| m_previousText.reset(); |
| } |
| append(m_buffer, m_underlyingIterator.text()); |
| } |
| } |
| |
| StringView WordAwareIterator::text() const |
| { |
| if (!m_buffer.isEmpty()) |
| return StringView(m_buffer.data(), m_buffer.size()); |
| if (m_previousText.text().length()) |
| return m_previousText.text(); |
| return m_underlyingIterator.text(); |
| } |
| |
| // -------- |
| |
| static inline UChar foldQuoteMark(UChar c) |
| { |
| switch (c) { |
| case hebrewPunctuationGershayim: |
| case leftDoubleQuotationMark: |
| case leftLowDoubleQuotationMark: |
| case rightDoubleQuotationMark: |
| return '"'; |
| case hebrewPunctuationGeresh: |
| case leftSingleQuotationMark: |
| case leftLowSingleQuotationMark: |
| case rightSingleQuotationMark: |
| return '\''; |
| default: |
| return c; |
| } |
| } |
| |
| // FIXME: We'd like to tailor the searcher to fold quote marks for us instead |
| // of doing it in a separate replacement pass here, but ICU doesn't offer a way |
| // to add tailoring on top of the locale-specific tailoring as of this writing. |
| String foldQuoteMarks(const String& stringToFold) |
| { |
| String result(stringToFold); |
| result.replace(hebrewPunctuationGeresh, '\''); |
| result.replace(hebrewPunctuationGershayim, '"'); |
| result.replace(leftDoubleQuotationMark, '"'); |
| result.replace(leftLowDoubleQuotationMark, '"'); |
| result.replace(leftSingleQuotationMark, '\''); |
| result.replace(leftLowSingleQuotationMark, '\''); |
| result.replace(rightDoubleQuotationMark, '"'); |
| result.replace(rightSingleQuotationMark, '\''); |
| |
| return result; |
| } |
| |
| #if !UCONFIG_NO_COLLATION |
| |
| const size_t minimumSearchBufferSize = 8192; |
| |
| #ifndef NDEBUG |
| static bool searcherInUse; |
| #endif |
| |
| static UStringSearch* createSearcher() |
| { |
| // Provide a non-empty pattern and non-empty text so usearch_open will not fail, |
| // but it doesn't matter exactly what it is, since we don't perform any searches |
| // without setting both the pattern and the text. |
| UErrorCode status = U_ZERO_ERROR; |
| String searchCollatorName = makeString(currentSearchLocaleID(), "@collation=search"); |
| UStringSearch* searcher = usearch_open(&newlineCharacter, 1, &newlineCharacter, 1, searchCollatorName.utf8().data(), 0, &status); |
| ASSERT(status == U_ZERO_ERROR || status == U_USING_FALLBACK_WARNING || status == U_USING_DEFAULT_WARNING); |
| return searcher; |
| } |
| |
| static UStringSearch* searcher() |
| { |
| static UStringSearch* searcher = createSearcher(); |
| return searcher; |
| } |
| |
| static inline void lockSearcher() |
| { |
| #ifndef NDEBUG |
| ASSERT(!searcherInUse); |
| searcherInUse = true; |
| #endif |
| } |
| |
| static inline void unlockSearcher() |
| { |
| #ifndef NDEBUG |
| ASSERT(searcherInUse); |
| searcherInUse = false; |
| #endif |
| } |
| |
| // ICU's search ignores the distinction between small kana letters and ones |
| // that are not small, and also characters that differ only in the voicing |
| // marks when considering only primary collation strength differences. |
| // This is not helpful for end users, since these differences make words |
| // distinct, so for our purposes we need these to be considered. |
| // The Unicode folks do not think the collation algorithm should be |
| // changed. To work around this, we would like to tailor the ICU searcher, |
| // but we can't get that to work yet. So instead, we check for cases where |
| // these differences occur, and skip those matches. |
| |
| // We refer to the above technique as the "kana workaround". The next few |
| // functions are helper functinos for the kana workaround. |
| |
| static inline bool isKanaLetter(UChar character) |
| { |
| // Hiragana letters. |
| if (character >= 0x3041 && character <= 0x3096) |
| return true; |
| |
| // Katakana letters. |
| if (character >= 0x30A1 && character <= 0x30FA) |
| return true; |
| if (character >= 0x31F0 && character <= 0x31FF) |
| return true; |
| |
| // Halfwidth katakana letters. |
| if (character >= 0xFF66 && character <= 0xFF9D && character != 0xFF70) |
| return true; |
| |
| return false; |
| } |
| |
| static inline bool isSmallKanaLetter(UChar character) |
| { |
| ASSERT(isKanaLetter(character)); |
| |
| switch (character) { |
| case 0x3041: // HIRAGANA LETTER SMALL A |
| case 0x3043: // HIRAGANA LETTER SMALL I |
| case 0x3045: // HIRAGANA LETTER SMALL U |
| case 0x3047: // HIRAGANA LETTER SMALL E |
| case 0x3049: // HIRAGANA LETTER SMALL O |
| case 0x3063: // HIRAGANA LETTER SMALL TU |
| case 0x3083: // HIRAGANA LETTER SMALL YA |
| case 0x3085: // HIRAGANA LETTER SMALL YU |
| case 0x3087: // HIRAGANA LETTER SMALL YO |
| case 0x308E: // HIRAGANA LETTER SMALL WA |
| case 0x3095: // HIRAGANA LETTER SMALL KA |
| case 0x3096: // HIRAGANA LETTER SMALL KE |
| case 0x30A1: // KATAKANA LETTER SMALL A |
| case 0x30A3: // KATAKANA LETTER SMALL I |
| case 0x30A5: // KATAKANA LETTER SMALL U |
| case 0x30A7: // KATAKANA LETTER SMALL E |
| case 0x30A9: // KATAKANA LETTER SMALL O |
| case 0x30C3: // KATAKANA LETTER SMALL TU |
| case 0x30E3: // KATAKANA LETTER SMALL YA |
| case 0x30E5: // KATAKANA LETTER SMALL YU |
| case 0x30E7: // KATAKANA LETTER SMALL YO |
| case 0x30EE: // KATAKANA LETTER SMALL WA |
| case 0x30F5: // KATAKANA LETTER SMALL KA |
| case 0x30F6: // KATAKANA LETTER SMALL KE |
| case 0x31F0: // KATAKANA LETTER SMALL KU |
| case 0x31F1: // KATAKANA LETTER SMALL SI |
| case 0x31F2: // KATAKANA LETTER SMALL SU |
| case 0x31F3: // KATAKANA LETTER SMALL TO |
| case 0x31F4: // KATAKANA LETTER SMALL NU |
| case 0x31F5: // KATAKANA LETTER SMALL HA |
| case 0x31F6: // KATAKANA LETTER SMALL HI |
| case 0x31F7: // KATAKANA LETTER SMALL HU |
| case 0x31F8: // KATAKANA LETTER SMALL HE |
| case 0x31F9: // KATAKANA LETTER SMALL HO |
| case 0x31FA: // KATAKANA LETTER SMALL MU |
| case 0x31FB: // KATAKANA LETTER SMALL RA |
| case 0x31FC: // KATAKANA LETTER SMALL RI |
| case 0x31FD: // KATAKANA LETTER SMALL RU |
| case 0x31FE: // KATAKANA LETTER SMALL RE |
| case 0x31FF: // KATAKANA LETTER SMALL RO |
| case 0xFF67: // HALFWIDTH KATAKANA LETTER SMALL A |
| case 0xFF68: // HALFWIDTH KATAKANA LETTER SMALL I |
| case 0xFF69: // HALFWIDTH KATAKANA LETTER SMALL U |
| case 0xFF6A: // HALFWIDTH KATAKANA LETTER SMALL E |
| case 0xFF6B: // HALFWIDTH KATAKANA LETTER SMALL O |
| case 0xFF6C: // HALFWIDTH KATAKANA LETTER SMALL YA |
| case 0xFF6D: // HALFWIDTH KATAKANA LETTER SMALL YU |
| case 0xFF6E: // HALFWIDTH KATAKANA LETTER SMALL YO |
| case 0xFF6F: // HALFWIDTH KATAKANA LETTER SMALL TU |
| return true; |
| } |
| return false; |
| } |
| |
| enum VoicedSoundMarkType { NoVoicedSoundMark, VoicedSoundMark, SemiVoicedSoundMark }; |
| |
| static inline VoicedSoundMarkType composedVoicedSoundMark(UChar character) |
| { |
| ASSERT(isKanaLetter(character)); |
| |
| switch (character) { |
| case 0x304C: // HIRAGANA LETTER GA |
| case 0x304E: // HIRAGANA LETTER GI |
| case 0x3050: // HIRAGANA LETTER GU |
| case 0x3052: // HIRAGANA LETTER GE |
| case 0x3054: // HIRAGANA LETTER GO |
| case 0x3056: // HIRAGANA LETTER ZA |
| case 0x3058: // HIRAGANA LETTER ZI |
| case 0x305A: // HIRAGANA LETTER ZU |
| case 0x305C: // HIRAGANA LETTER ZE |
| case 0x305E: // HIRAGANA LETTER ZO |
| case 0x3060: // HIRAGANA LETTER DA |
| case 0x3062: // HIRAGANA LETTER DI |
| case 0x3065: // HIRAGANA LETTER DU |
| case 0x3067: // HIRAGANA LETTER DE |
| case 0x3069: // HIRAGANA LETTER DO |
| case 0x3070: // HIRAGANA LETTER BA |
| case 0x3073: // HIRAGANA LETTER BI |
| case 0x3076: // HIRAGANA LETTER BU |
| case 0x3079: // HIRAGANA LETTER BE |
| case 0x307C: // HIRAGANA LETTER BO |
| case 0x3094: // HIRAGANA LETTER VU |
| case 0x30AC: // KATAKANA LETTER GA |
| case 0x30AE: // KATAKANA LETTER GI |
| case 0x30B0: // KATAKANA LETTER GU |
| case 0x30B2: // KATAKANA LETTER GE |
| case 0x30B4: // KATAKANA LETTER GO |
| case 0x30B6: // KATAKANA LETTER ZA |
| case 0x30B8: // KATAKANA LETTER ZI |
| case 0x30BA: // KATAKANA LETTER ZU |
| case 0x30BC: // KATAKANA LETTER ZE |
| case 0x30BE: // KATAKANA LETTER ZO |
| case 0x30C0: // KATAKANA LETTER DA |
| case 0x30C2: // KATAKANA LETTER DI |
| case 0x30C5: // KATAKANA LETTER DU |
| case 0x30C7: // KATAKANA LETTER DE |
| case 0x30C9: // KATAKANA LETTER DO |
| case 0x30D0: // KATAKANA LETTER BA |
| case 0x30D3: // KATAKANA LETTER BI |
| case 0x30D6: // KATAKANA LETTER BU |
| case 0x30D9: // KATAKANA LETTER BE |
| case 0x30DC: // KATAKANA LETTER BO |
| case 0x30F4: // KATAKANA LETTER VU |
| case 0x30F7: // KATAKANA LETTER VA |
| case 0x30F8: // KATAKANA LETTER VI |
| case 0x30F9: // KATAKANA LETTER VE |
| case 0x30FA: // KATAKANA LETTER VO |
| return VoicedSoundMark; |
| case 0x3071: // HIRAGANA LETTER PA |
| case 0x3074: // HIRAGANA LETTER PI |
| case 0x3077: // HIRAGANA LETTER PU |
| case 0x307A: // HIRAGANA LETTER PE |
| case 0x307D: // HIRAGANA LETTER PO |
| case 0x30D1: // KATAKANA LETTER PA |
| case 0x30D4: // KATAKANA LETTER PI |
| case 0x30D7: // KATAKANA LETTER PU |
| case 0x30DA: // KATAKANA LETTER PE |
| case 0x30DD: // KATAKANA LETTER PO |
| return SemiVoicedSoundMark; |
| } |
| return NoVoicedSoundMark; |
| } |
| |
| static inline bool isCombiningVoicedSoundMark(UChar character) |
| { |
| switch (character) { |
| case 0x3099: // COMBINING KATAKANA-HIRAGANA VOICED SOUND MARK |
| case 0x309A: // COMBINING KATAKANA-HIRAGANA SEMI-VOICED SOUND MARK |
| return true; |
| } |
| return false; |
| } |
| |
| static inline bool containsKanaLetters(const String& pattern) |
| { |
| if (pattern.is8Bit()) |
| return false; |
| const UChar* characters = pattern.characters16(); |
| unsigned length = pattern.length(); |
| for (unsigned i = 0; i < length; ++i) { |
| if (isKanaLetter(characters[i])) |
| return true; |
| } |
| return false; |
| } |
| |
| static void normalizeCharacters(const UChar* characters, unsigned length, Vector<UChar>& buffer) |
| { |
| UErrorCode status = U_ZERO_ERROR; |
| const UNormalizer2* normalizer = unorm2_getNFCInstance(&status); |
| ASSERT(U_SUCCESS(status)); |
| |
| buffer.resize(length); |
| |
| auto normalizedLength = unorm2_normalize(normalizer, characters, length, buffer.data(), length, &status); |
| ASSERT(U_SUCCESS(status) || status == U_BUFFER_OVERFLOW_ERROR); |
| |
| buffer.resize(normalizedLength); |
| |
| if (U_SUCCESS(status)) |
| return; |
| |
| status = U_ZERO_ERROR; |
| unorm2_normalize(normalizer, characters, length, buffer.data(), length, &status); |
| ASSERT(U_SUCCESS(status)); |
| } |
| |
| static bool isNonLatin1Separator(UChar32 character) |
| { |
| ASSERT_ARG(character, !isLatin1(character)); |
| |
| return U_GET_GC_MASK(character) & (U_GC_S_MASK | U_GC_P_MASK | U_GC_Z_MASK | U_GC_CF_MASK); |
| } |
| |
| static inline bool isSeparator(UChar32 character) |
| { |
| static const bool latin1SeparatorTable[256] = { |
| 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, |
| 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, |
| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, // space ! " # $ % & ' ( ) * + , - . / |
| 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 1, 1, 1, // : ; < = > ? |
| 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, // @ |
| 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 1, 1, // [ \ ] ^ _ |
| 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, // ` |
| 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 1, 0, // { | } ~ |
| 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, |
| 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, |
| 0, 1, 1, 1, 1, 1, 1, 1, 1, 1, 0, 1, 1, 1, 1, 1, |
| 1, 1, 1, 1, 1, 0, 1, 1, 1, 1, 0, 1, 1, 1, 1, 1, |
| 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, |
| 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, |
| 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, |
| 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0 |
| }; |
| |
| if (isLatin1(character)) |
| return latin1SeparatorTable[character]; |
| |
| return isNonLatin1Separator(character); |
| } |
| |
| inline SearchBuffer::SearchBuffer(const String& target, FindOptions options) |
| : m_target(foldQuoteMarks(target)) |
| , m_targetCharacters(StringView(m_target).upconvertedCharacters()) |
| , m_options(options) |
| , m_prefixLength(0) |
| , m_atBreak(true) |
| , m_needsMoreContext(options.contains(AtWordStarts)) |
| , m_targetRequiresKanaWorkaround(containsKanaLetters(m_target)) |
| { |
| ASSERT(!m_target.isEmpty()); |
| |
| size_t targetLength = m_target.length(); |
| m_buffer.reserveInitialCapacity(std::max(targetLength * 8, minimumSearchBufferSize)); |
| m_overlap = m_buffer.capacity() / 4; |
| |
| if (m_options.contains(AtWordStarts) && targetLength) { |
| UChar32 targetFirstCharacter; |
| U16_GET(m_target, 0, 0u, targetLength, targetFirstCharacter); |
| // Characters in the separator category never really occur at the beginning of a word, |
| // so if the target begins with such a character, we just ignore the AtWordStart option. |
| if (isSeparator(targetFirstCharacter)) { |
| m_options.remove(AtWordStarts); |
| m_needsMoreContext = false; |
| } |
| } |
| |
| // Grab the single global searcher. |
| // If we ever have a reason to do more than once search buffer at once, we'll have |
| // to move to multiple searchers. |
| lockSearcher(); |
| |
| UStringSearch* searcher = WebCore::searcher(); |
| UCollator* collator = usearch_getCollator(searcher); |
| |
| UCollationStrength strength; |
| USearchAttributeValue comparator; |
| if (m_options.contains(CaseInsensitive)) { |
| // Without loss of generality, have 'e' match {'e', 'E', 'é', 'É'} and 'é' match {'é', 'É'}. |
| strength = UCOL_SECONDARY; |
| comparator = USEARCH_PATTERN_BASE_WEIGHT_IS_WILDCARD; |
| } else { |
| // Without loss of generality, have 'e' match {'e'} and 'é' match {'é'}. |
| strength = UCOL_TERTIARY; |
| comparator = USEARCH_STANDARD_ELEMENT_COMPARISON; |
| } |
| if (ucol_getStrength(collator) != strength) { |
| ucol_setStrength(collator, strength); |
| usearch_reset(searcher); |
| } |
| |
| UErrorCode status = U_ZERO_ERROR; |
| usearch_setAttribute(searcher, USEARCH_ELEMENT_COMPARISON, comparator, &status); |
| ASSERT(status == U_ZERO_ERROR); |
| |
| usearch_setPattern(searcher, m_targetCharacters, targetLength, &status); |
| ASSERT(status == U_ZERO_ERROR); |
| |
| // The kana workaround requires a normalized copy of the target string. |
| if (m_targetRequiresKanaWorkaround) |
| normalizeCharacters(m_targetCharacters, targetLength, m_normalizedTarget); |
| } |
| |
| inline SearchBuffer::~SearchBuffer() |
| { |
| // Leave the static object pointing to a valid string. |
| UErrorCode status = U_ZERO_ERROR; |
| usearch_setPattern(WebCore::searcher(), &newlineCharacter, 1, &status); |
| ASSERT(status == U_ZERO_ERROR); |
| usearch_setText(WebCore::searcher(), &newlineCharacter, 1, &status); |
| ASSERT(status == U_ZERO_ERROR); |
| |
| unlockSearcher(); |
| } |
| |
| inline size_t SearchBuffer::append(StringView text) |
| { |
| ASSERT(text.length()); |
| |
| if (m_atBreak) { |
| m_buffer.shrink(0); |
| m_prefixLength = 0; |
| m_atBreak = false; |
| } else if (m_buffer.size() == m_buffer.capacity()) { |
| memcpy(m_buffer.data(), m_buffer.data() + m_buffer.size() - m_overlap, m_overlap * sizeof(UChar)); |
| m_prefixLength -= std::min(m_prefixLength, m_buffer.size() - m_overlap); |
| m_buffer.shrink(m_overlap); |
| } |
| |
| size_t oldLength = m_buffer.size(); |
| size_t usableLength = std::min<size_t>(m_buffer.capacity() - oldLength, text.length()); |
| ASSERT(usableLength); |
| m_buffer.grow(oldLength + usableLength); |
| for (unsigned i = 0; i < usableLength; ++i) |
| m_buffer[oldLength + i] = foldQuoteMark(text[i]); |
| return usableLength; |
| } |
| |
| inline bool SearchBuffer::needsMoreContext() const |
| { |
| return m_needsMoreContext; |
| } |
| |
| inline void SearchBuffer::prependContext(StringView text) |
| { |
| ASSERT(m_needsMoreContext); |
| ASSERT(m_prefixLength == m_buffer.size()); |
| |
| if (!text.length()) |
| return; |
| |
| m_atBreak = false; |
| |
| size_t wordBoundaryContextStart = text.length(); |
| if (wordBoundaryContextStart) { |
| U16_BACK_1(text, 0, wordBoundaryContextStart); |
| wordBoundaryContextStart = startOfLastWordBoundaryContext(text.substring(0, wordBoundaryContextStart)); |
| } |
| |
| size_t usableLength = std::min(m_buffer.capacity() - m_prefixLength, text.length() - wordBoundaryContextStart); |
| WTF::append(m_buffer, text.substring(text.length() - usableLength, usableLength)); |
| m_prefixLength += usableLength; |
| |
| if (wordBoundaryContextStart || m_prefixLength == m_buffer.capacity()) |
| m_needsMoreContext = false; |
| } |
| |
| inline bool SearchBuffer::atBreak() const |
| { |
| return m_atBreak; |
| } |
| |
| inline void SearchBuffer::reachedBreak() |
| { |
| m_atBreak = true; |
| } |
| |
| inline bool SearchBuffer::isBadMatch(const UChar* match, size_t matchLength) const |
| { |
| // This function implements the kana workaround. If usearch treats |
| // it as a match, but we do not want to, then it's a "bad match". |
| if (!m_targetRequiresKanaWorkaround) |
| return false; |
| |
| // Normalize into a match buffer. We reuse a single buffer rather than |
| // creating a new one each time. |
| normalizeCharacters(match, matchLength, m_normalizedMatch); |
| |
| const UChar* a = m_normalizedTarget.begin(); |
| const UChar* aEnd = m_normalizedTarget.end(); |
| |
| const UChar* b = m_normalizedMatch.begin(); |
| const UChar* bEnd = m_normalizedMatch.end(); |
| |
| while (true) { |
| // Skip runs of non-kana-letter characters. This is necessary so we can |
| // correctly handle strings where the target and match have different-length |
| // runs of characters that match, while still double checking the correctness |
| // of matches of kana letters with other kana letters. |
| while (a != aEnd && !isKanaLetter(*a)) |
| ++a; |
| while (b != bEnd && !isKanaLetter(*b)) |
| ++b; |
| |
| // If we reached the end of either the target or the match, we should have |
| // reached the end of both; both should have the same number of kana letters. |
| if (a == aEnd || b == bEnd) { |
| ASSERT(a == aEnd); |
| ASSERT(b == bEnd); |
| return false; |
| } |
| |
| // Check for differences in the kana letter character itself. |
| if (isSmallKanaLetter(*a) != isSmallKanaLetter(*b)) |
| return true; |
| if (composedVoicedSoundMark(*a) != composedVoicedSoundMark(*b)) |
| return true; |
| ++a; |
| ++b; |
| |
| // Check for differences in combining voiced sound marks found after the letter. |
| while (1) { |
| if (!(a != aEnd && isCombiningVoicedSoundMark(*a))) { |
| if (b != bEnd && isCombiningVoicedSoundMark(*b)) |
| return true; |
| break; |
| } |
| if (!(b != bEnd && isCombiningVoicedSoundMark(*b))) |
| return true; |
| if (*a != *b) |
| return true; |
| ++a; |
| ++b; |
| } |
| } |
| } |
| |
| inline bool SearchBuffer::isWordEndMatch(size_t start, size_t length) const |
| { |
| ASSERT(length); |
| ASSERT(m_options.contains(AtWordEnds)); |
| |
| int endWord; |
| // Start searching at the end of matched search, so that multiple word matches succeed. |
| findEndWordBoundary(StringView(m_buffer.data(), m_buffer.size()), start + length - 1, &endWord); |
| return static_cast<size_t>(endWord) == (start + length); |
| } |
| |
| inline bool SearchBuffer::isWordStartMatch(size_t start, size_t length) const |
| { |
| ASSERT(m_options.contains(AtWordStarts)); |
| |
| if (!start) |
| return true; |
| |
| int size = m_buffer.size(); |
| int offset = start; |
| UChar32 firstCharacter; |
| U16_GET(m_buffer.data(), 0, offset, size, firstCharacter); |
| |
| if (m_options.contains(TreatMedialCapitalAsWordStart)) { |
| UChar32 previousCharacter; |
| U16_PREV(m_buffer.data(), 0, offset, previousCharacter); |
| |
| if (isSeparator(firstCharacter)) { |
| // The start of a separator run is a word start (".org" in "webkit.org"). |
| if (!isSeparator(previousCharacter)) |
| return true; |
| } else if (isASCIIUpper(firstCharacter)) { |
| // The start of an uppercase run is a word start ("Kit" in "WebKit"). |
| if (!isASCIIUpper(previousCharacter)) |
| return true; |
| // The last character of an uppercase run followed by a non-separator, non-digit |
| // is a word start ("Request" in "XMLHTTPRequest"). |
| offset = start; |
| U16_FWD_1(m_buffer.data(), offset, size); |
| UChar32 nextCharacter = 0; |
| if (offset < size) |
| U16_GET(m_buffer.data(), 0, offset, size, nextCharacter); |
| if (!isASCIIUpper(nextCharacter) && !isASCIIDigit(nextCharacter) && !isSeparator(nextCharacter)) |
| return true; |
| } else if (isASCIIDigit(firstCharacter)) { |
| // The start of a digit run is a word start ("2" in "WebKit2"). |
| if (!isASCIIDigit(previousCharacter)) |
| return true; |
| } else if (isSeparator(previousCharacter) || isASCIIDigit(previousCharacter)) { |
| // The start of a non-separator, non-uppercase, non-digit run is a word start, |
| // except after an uppercase. ("org" in "webkit.org", but not "ore" in "WebCore"). |
| return true; |
| } |
| } |
| |
| // Chinese and Japanese lack word boundary marks, and there is no clear agreement on what constitutes |
| // a word, so treat the position before any CJK character as a word start. |
| if (FontCascade::isCJKIdeographOrSymbol(firstCharacter)) |
| return true; |
| |
| size_t wordBreakSearchStart = start + length; |
| while (wordBreakSearchStart > start) |
| wordBreakSearchStart = findNextWordFromIndex(StringView(m_buffer.data(), m_buffer.size()), wordBreakSearchStart, false /* backwards */); |
| return wordBreakSearchStart == start; |
| } |
| |
| inline size_t SearchBuffer::search(size_t& start) |
| { |
| size_t size = m_buffer.size(); |
| if (m_atBreak) { |
| if (!size) |
| return 0; |
| } else { |
| if (size != m_buffer.capacity()) |
| return 0; |
| } |
| |
| UStringSearch* searcher = WebCore::searcher(); |
| |
| UErrorCode status = U_ZERO_ERROR; |
| usearch_setText(searcher, m_buffer.data(), size, &status); |
| ASSERT(status == U_ZERO_ERROR); |
| |
| usearch_setOffset(searcher, m_prefixLength, &status); |
| ASSERT(status == U_ZERO_ERROR); |
| |
| int matchStart = usearch_next(searcher, &status); |
| ASSERT(status == U_ZERO_ERROR); |
| |
| nextMatch: |
| if (!(matchStart >= 0 && static_cast<size_t>(matchStart) < size)) { |
| ASSERT(matchStart == USEARCH_DONE); |
| return 0; |
| } |
| |
| // Matches that start in the overlap area are only tentative. |
| // The same match may appear later, matching more characters, |
| // possibly including a combining character that's not yet in the buffer. |
| if (!m_atBreak && static_cast<size_t>(matchStart) >= size - m_overlap) { |
| size_t overlap = m_overlap; |
| if (m_options.contains(AtWordStarts)) { |
| // Ensure that there is sufficient context before matchStart the next time around for |
| // determining if it is at a word boundary. |
| unsigned wordBoundaryContextStart = matchStart; |
| U16_BACK_1(m_buffer.data(), 0, wordBoundaryContextStart); |
| wordBoundaryContextStart = startOfLastWordBoundaryContext(StringView(m_buffer.data(), wordBoundaryContextStart)); |
| overlap = std::min(size - 1, std::max(overlap, size - wordBoundaryContextStart)); |
| } |
| memcpy(m_buffer.data(), m_buffer.data() + size - overlap, overlap * sizeof(UChar)); |
| m_prefixLength -= std::min(m_prefixLength, size - overlap); |
| m_buffer.shrink(overlap); |
| return 0; |
| } |
| |
| size_t matchedLength = usearch_getMatchedLength(searcher); |
| ASSERT_WITH_SECURITY_IMPLICATION(matchStart + matchedLength <= size); |
| |
| // If this match is "bad", move on to the next match. |
| if (isBadMatch(m_buffer.data() + matchStart, matchedLength) |
| || (m_options.contains(AtWordStarts) && !isWordStartMatch(matchStart, matchedLength)) |
| || (m_options.contains(AtWordEnds) && !isWordEndMatch(matchStart, matchedLength))) { |
| matchStart = usearch_next(searcher, &status); |
| ASSERT(status == U_ZERO_ERROR); |
| goto nextMatch; |
| } |
| |
| size_t newSize = size - (matchStart + 1); |
| memmove(m_buffer.data(), m_buffer.data() + matchStart + 1, newSize * sizeof(UChar)); |
| m_prefixLength -= std::min<size_t>(m_prefixLength, matchStart + 1); |
| m_buffer.shrink(newSize); |
| |
| start = size - matchStart; |
| return matchedLength; |
| } |
| |
| #else |
| |
| inline SearchBuffer::SearchBuffer(const String& target, FindOptions options) |
| : m_target(foldQuoteMarks(options & CaseInsensitive ? target.foldCase() : target)) |
| , m_options(options) |
| , m_buffer(m_target.length()) |
| , m_isCharacterStartBuffer(m_target.length()) |
| , m_isBufferFull(false) |
| , m_cursor(0) |
| { |
| ASSERT(!m_target.isEmpty()); |
| m_target.replace(noBreakSpace, ' '); |
| } |
| |
| inline SearchBuffer::~SearchBuffer() = default; |
| |
| inline void SearchBuffer::reachedBreak() |
| { |
| m_cursor = 0; |
| m_isBufferFull = false; |
| } |
| |
| inline bool SearchBuffer::atBreak() const |
| { |
| return !m_cursor && !m_isBufferFull; |
| } |
| |
| inline void SearchBuffer::append(UChar c, bool isStart) |
| { |
| m_buffer[m_cursor] = c == noBreakSpace ? ' ' : foldQuoteMark(c); |
| m_isCharacterStartBuffer[m_cursor] = isStart; |
| if (++m_cursor == m_target.length()) { |
| m_cursor = 0; |
| m_isBufferFull = true; |
| } |
| } |
| |
| inline size_t SearchBuffer::append(const UChar* characters, size_t length) |
| { |
| ASSERT(length); |
| if (!(m_options & CaseInsensitive)) { |
| append(characters[0], true); |
| return 1; |
| } |
| const int maxFoldedCharacters = 16; // sensible maximum is 3, this should be more than enough |
| UChar foldedCharacters[maxFoldedCharacters]; |
| UErrorCode status = U_ZERO_ERROR; |
| int numFoldedCharacters = u_strFoldCase(foldedCharacters, maxFoldedCharacters, characters, 1, U_FOLD_CASE_DEFAULT, &status); |
| ASSERT(U_SUCCESS(status)); |
| ASSERT(numFoldedCharacters); |
| ASSERT(numFoldedCharacters <= maxFoldedCharacters); |
| if (U_SUCCESS(status) && numFoldedCharacters) { |
| numFoldedCharacters = std::min(numFoldedCharacters, maxFoldedCharacters); |
| append(foldedCharacters[0], true); |
| for (int i = 1; i < numFoldedCharacters; ++i) |
| append(foldedCharacters[i], false); |
| } |
| return 1; |
| } |
| |
| inline bool SearchBuffer::needsMoreContext() const |
| { |
| return false; |
| } |
| |
| void SearchBuffer::prependContext(const UChar*, size_t) |
| { |
| ASSERT_NOT_REACHED(); |
| } |
| |
| inline size_t SearchBuffer::search(size_t& start) |
| { |
| if (!m_isBufferFull) |
| return 0; |
| if (!m_isCharacterStartBuffer[m_cursor]) |
| return 0; |
| |
| size_t tailSpace = m_target.length() - m_cursor; |
| if (memcmp(&m_buffer[m_cursor], m_target.characters(), tailSpace * sizeof(UChar)) != 0) |
| return 0; |
| if (memcmp(&m_buffer[0], m_target.characters() + tailSpace, m_cursor * sizeof(UChar)) != 0) |
| return 0; |
| |
| start = length(); |
| |
| // Now that we've found a match once, we don't want to find it again, because those |
| // are the SearchBuffer semantics, allowing for a buffer where you append more than one |
| // character at a time. To do this we take advantage of m_isCharacterStartBuffer, but if |
| // we want to get rid of that in the future we could track this with a separate boolean |
| // or even move the characters to the start of the buffer and set m_isBufferFull to false. |
| m_isCharacterStartBuffer[m_cursor] = false; |
| |
| return start; |
| } |
| |
| // Returns the number of characters that were appended to the buffer (what we are searching in). |
| // That's not necessarily the same length as the passed-in target string, because case folding |
| // can make two strings match even though they're not the same length. |
| size_t SearchBuffer::length() const |
| { |
| size_t bufferSize = m_target.length(); |
| size_t length = 0; |
| for (size_t i = 0; i < bufferSize; ++i) |
| length += m_isCharacterStartBuffer[i]; |
| return length; |
| } |
| |
| #endif |
| |
| // -------- |
| |
| int TextIterator::rangeLength(const Range* range, bool forSelectionPreservation) |
| { |
| unsigned length = 0; |
| for (TextIterator it(range, forSelectionPreservation ? TextIteratorEmitsCharactersBetweenAllVisiblePositions : TextIteratorDefaultBehavior); !it.atEnd(); it.advance()) |
| length += it.text().length(); |
| return length; |
| } |
| |
| Ref<Range> TextIterator::subrange(Range& entireRange, int characterOffset, int characterCount) |
| { |
| CharacterIterator entireRangeIterator(entireRange); |
| return characterSubrange(entireRange.ownerDocument(), entireRangeIterator, characterOffset, characterCount); |
| } |
| |
| static inline bool isInsideReplacedElement(TextIterator& iterator) |
| { |
| ASSERT(!iterator.atEnd()); |
| ASSERT(iterator.text().length() == 1); |
| Node* node = iterator.node(); |
| return node && isRendererReplacedElement(node->renderer()); |
| } |
| |
| RefPtr<Range> TextIterator::rangeFromLocationAndLength(ContainerNode* scope, int rangeLocation, int rangeLength, bool forSelectionPreservation) |
| { |
| Ref<Range> resultRange = scope->document().createRange(); |
| |
| int docTextPosition = 0; |
| int rangeEnd = rangeLocation + rangeLength; |
| bool startRangeFound = false; |
| |
| Ref<Range> textRunRange = rangeOfContents(*scope); |
| |
| TextIterator it(textRunRange.ptr(), forSelectionPreservation ? TextIteratorEmitsCharactersBetweenAllVisiblePositions : TextIteratorDefaultBehavior); |
| |
| // FIXME: the atEnd() check shouldn't be necessary, workaround for <http://bugs.webkit.org/show_bug.cgi?id=6289>. |
| if (!rangeLocation && !rangeLength && it.atEnd()) { |
| resultRange->setStart(textRunRange->startContainer(), 0); |
| resultRange->setEnd(textRunRange->startContainer(), 0); |
| return resultRange; |
| } |
| |
| for (; !it.atEnd(); it.advance()) { |
| int length = it.text().length(); |
| textRunRange = it.range(); |
| |
| bool foundStart = rangeLocation >= docTextPosition && rangeLocation <= docTextPosition + length; |
| bool foundEnd = rangeEnd >= docTextPosition && rangeEnd <= docTextPosition + length; |
| |
| if (foundEnd) { |
| // FIXME: This is a workaround for the fact that the end of a run is often at the wrong |
| // position for emitted '\n's or if the renderer of the current node is a replaced element. |
| if (length == 1 && (it.text()[0] == '\n' || isInsideReplacedElement(it))) { |
| it.advance(); |
| if (!it.atEnd()) { |
| Ref<Range> range = it.range(); |
| textRunRange->setEnd(range->startContainer(), range->startOffset()); |
| } else { |
| Position runStart = textRunRange->startPosition(); |
| Position runEnd = VisiblePosition(runStart).next().deepEquivalent(); |
| if (runEnd.isNotNull()) |
| textRunRange->setEnd(*runEnd.containerNode(), runEnd.computeOffsetInContainerNode()); |
| } |
| } |
| } |
| |
| if (foundStart) { |
| startRangeFound = true; |
| if (textRunRange->startContainer().isTextNode()) { |
| int offset = rangeLocation - docTextPosition; |
| resultRange->setStart(textRunRange->startContainer(), offset + textRunRange->startOffset()); |
| } else { |
| if (rangeLocation == docTextPosition) |
| resultRange->setStart(textRunRange->startContainer(), textRunRange->startOffset()); |
| else |
| resultRange->setStart(textRunRange->endContainer(), textRunRange->endOffset()); |
| } |
| } |
| |
| if (foundEnd) { |
| if (textRunRange->startContainer().isTextNode()) { |
| int offset = rangeEnd - docTextPosition; |
| resultRange->setEnd(textRunRange->startContainer(), offset + textRunRange->startOffset()); |
| } else { |
| if (rangeEnd == docTextPosition) |
| resultRange->setEnd(textRunRange->startContainer(), textRunRange->startOffset()); |
| else |
| resultRange->setEnd(textRunRange->endContainer(), textRunRange->endOffset()); |
| } |
| docTextPosition += length; |
| break; |
| } |
| |
| docTextPosition += length; |
| } |
| |
| if (!startRangeFound) |
| return nullptr; |
| |
| if (rangeLength && rangeEnd > docTextPosition) // rangeEnd is out of bounds |
| resultRange->setEnd(textRunRange->endContainer(), textRunRange->endOffset()); |
| |
| return resultRange; |
| } |
| |
| bool TextIterator::getLocationAndLengthFromRange(Node* scope, const Range* range, size_t& location, size_t& length) |
| { |
| location = notFound; |
| length = 0; |
| |
| // The critical assumption is that this only gets called with ranges that |
| // concentrate on a given area containing the selection root. This is done |
| // because of text fields and textareas. The DOM for those is not |
| // directly in the document DOM, so ensure that the range does not cross a |
| // boundary of one of those. |
| if (&range->startContainer() != scope && !range->startContainer().isDescendantOf(scope)) |
| return false; |
| if (&range->endContainer() != scope && !range->endContainer().isDescendantOf(scope)) |
| return false; |
| |
| Ref<Range> testRange = Range::create(scope->document(), scope, 0, &range->startContainer(), range->startOffset()); |
| ASSERT(&testRange->startContainer() == scope); |
| location = TextIterator::rangeLength(testRange.ptr()); |
| |
| testRange->setEnd(range->endContainer(), range->endOffset()); |
| ASSERT(&testRange->startContainer() == scope); |
| length = TextIterator::rangeLength(testRange.ptr()) - location; |
| return true; |
| } |
| |
| // -------- |
| |
| bool hasAnyPlainText(const Range& range, TextIteratorBehavior behavior) |
| { |
| for (TextIterator iterator { &range, behavior }; !iterator.atEnd(); iterator.advance()) { |
| if (!iterator.text().isEmpty()) |
| return true; |
| } |
| return false; |
| } |
| |
| String plainText(Position start, Position end, TextIteratorBehavior defaultBehavior, bool isDisplayString) |
| { |
| // The initial buffer size can be critical for performance: https://bugs.webkit.org/show_bug.cgi?id=81192 |
| static const unsigned initialCapacity = 1 << 15; |
| |
| if (!start.document()) |
| return { }; |
| auto document = makeRef(*start.document()); |
| |
| unsigned bufferLength = 0; |
| StringBuilder builder; |
| builder.reserveCapacity(initialCapacity); |
| TextIteratorBehavior behavior = defaultBehavior; |
| if (!isDisplayString) |
| behavior = static_cast<TextIteratorBehavior>(behavior | TextIteratorEmitsTextsWithoutTranscoding); |
| |
| for (TextIterator it(start, end, behavior); !it.atEnd(); it.advance()) { |
| it.appendTextToStringBuilder(builder); |
| bufferLength += it.text().length(); |
| } |
| |
| if (!bufferLength) |
| return emptyString(); |
| |
| String result = builder.toString(); |
| |
| if (isDisplayString) |
| document->displayStringModifiedByEncoding(result); |
| |
| return result; |
| } |
| |
| String plainTextReplacingNoBreakSpace(Position start, Position end, TextIteratorBehavior defaultBehavior, bool isDisplayString) |
| { |
| return plainText(start, end, defaultBehavior, isDisplayString).replace(noBreakSpace, ' '); |
| } |
| |
| String plainText(const Range* range, TextIteratorBehavior defaultBehavior, bool isDisplayString) |
| { |
| if (!range) |
| return emptyString(); |
| return plainText(range->startPosition(), range->endPosition(), defaultBehavior, isDisplayString); |
| } |
| |
| String plainTextUsingBackwardsTextIteratorForTesting(const Range& range) |
| { |
| String result; |
| for (SimplifiedBackwardsTextIterator backwardsIterator(range); !backwardsIterator.atEnd(); backwardsIterator.advance()) |
| result.insert(backwardsIterator.text().toString(), 0); |
| return result; |
| } |
| |
| String plainTextReplacingNoBreakSpace(const Range* range, TextIteratorBehavior defaultBehavior, bool isDisplayString) |
| { |
| return plainText(range, defaultBehavior, isDisplayString).replace(noBreakSpace, ' '); |
| } |
| |
| static Ref<Range> collapsedToBoundary(const Range& range, bool forward) |
| { |
| Ref<Range> result = range.cloneRange(); |
| result->collapse(!forward); |
| return result; |
| } |
| |
| static TextIteratorBehavior findIteratorOptions(FindOptions options) |
| { |
| TextIteratorBehavior iteratorOptions = TextIteratorEntersTextControls | TextIteratorClipsToFrameAncestors; |
| if (!options.contains(DoNotTraverseFlatTree)) |
| iteratorOptions |= TextIteratorTraversesFlatTree; |
| return iteratorOptions; |
| } |
| |
| static void findPlainTextMatches(const Range& range, const String& target, FindOptions options, const WTF::Function<bool(size_t, size_t)>& match) |
| { |
| SearchBuffer buffer(target, options); |
| if (buffer.needsMoreContext()) { |
| Ref<Range> beforeStartRange = range.ownerDocument().createRange(); |
| beforeStartRange->setEnd(range.startContainer(), range.startOffset()); |
| for (SimplifiedBackwardsTextIterator backwardsIterator(beforeStartRange.get()); !backwardsIterator.atEnd(); backwardsIterator.advance()) { |
| buffer.prependContext(backwardsIterator.text()); |
| if (!buffer.needsMoreContext()) |
| break; |
| } |
| } |
| |
| CharacterIterator findIterator(range, findIteratorOptions(options)); |
| while (!findIterator.atEnd()) { |
| findIterator.advance(buffer.append(findIterator.text())); |
| while (1) { |
| size_t matchStartOffset; |
| size_t newMatchLength = buffer.search(matchStartOffset); |
| if (!newMatchLength) { |
| if (findIterator.atBreak() && !buffer.atBreak()) { |
| buffer.reachedBreak(); |
| continue; |
| } |
| break; |
| } |
| size_t lastCharacterInBufferOffset = findIterator.characterOffset(); |
| ASSERT(lastCharacterInBufferOffset >= matchStartOffset); |
| if (match(lastCharacterInBufferOffset - matchStartOffset, newMatchLength)) |
| return; |
| } |
| } |
| } |
| |
| static Ref<Range> rangeForMatch(const Range& range, FindOptions options, size_t matchStart, size_t matchLength, bool searchForward) |
| { |
| if (!matchLength) |
| return collapsedToBoundary(range, searchForward); |
| CharacterIterator rangeComputeIterator(range, findIteratorOptions(options)); |
| return characterSubrange(range.ownerDocument(), rangeComputeIterator, matchStart, matchLength); |
| } |
| |
| Ref<Range> findClosestPlainText(const Range& range, const String& target, FindOptions options, unsigned targetOffset) |
| { |
| size_t matchStart = 0; |
| size_t matchLength = 0; |
| size_t distance = std::numeric_limits<size_t>::max(); |
| auto match = [targetOffset, &distance, &matchStart, &matchLength] (size_t start, size_t length) { |
| size_t newDistance = std::min(abs(static_cast<signed>(start - targetOffset)), abs(static_cast<signed>(start + length - targetOffset))); |
| if (newDistance < distance) { |
| matchStart = start; |
| matchLength = length; |
| distance = newDistance; |
| } |
| return false; |
| }; |
| |
| findPlainTextMatches(range, target, options, WTFMove(match)); |
| return rangeForMatch(range, options, matchStart, matchLength, !options.contains(Backwards)); |
| } |
| |
| Ref<Range> findPlainText(const Range& range, const String& target, FindOptions options) |
| { |
| bool searchForward = !options.contains(Backwards); |
| size_t matchStart = 0; |
| size_t matchLength = 0; |
| auto match = [searchForward, &matchStart, &matchLength] (size_t start, size_t length) { |
| matchStart = start; |
| matchLength = length; |
| // Look for the last match when searching backwards instead. |
| return searchForward; |
| }; |
| |
| findPlainTextMatches(range, target, options, WTFMove(match)); |
| return rangeForMatch(range, options, matchStart, matchLength, searchForward); |
| } |
| |
| bool findPlainText(const String& document, const String& target, FindOptions options) |
| { |
| SearchBuffer buffer { target, options }; |
| StringView remainingText { document }; |
| while (!remainingText.isEmpty()) { |
| size_t charactersAppended = buffer.append(document); |
| remainingText = remainingText.substring(charactersAppended); |
| if (remainingText.isEmpty()) |
| buffer.reachedBreak(); |
| size_t matchStartOffset; |
| if (buffer.search(matchStartOffset)) |
| return true; |
| } |
| return false; |
| } |
| |
| } |