| // |
| // Copyright 2016 The ANGLE Project Authors. All rights reserved. |
| // Use of this source code is governed by a BSD-style license that can be |
| // found in the LICENSE file. |
| // |
| // SurfaceVk.cpp: |
| // Implements the class methods for SurfaceVk. |
| // |
| |
| #include "libANGLE/renderer/vulkan/SurfaceVk.h" |
| |
| #include "common/debug.h" |
| #include "libANGLE/Context.h" |
| #include "libANGLE/Display.h" |
| #include "libANGLE/Overlay.h" |
| #include "libANGLE/Surface.h" |
| #include "libANGLE/renderer/vulkan/ContextVk.h" |
| #include "libANGLE/renderer/vulkan/DisplayVk.h" |
| #include "libANGLE/renderer/vulkan/FramebufferVk.h" |
| #include "libANGLE/renderer/vulkan/OverlayVk.h" |
| #include "libANGLE/renderer/vulkan/RendererVk.h" |
| #include "libANGLE/renderer/vulkan/vk_format_utils.h" |
| #include "libANGLE/trace.h" |
| |
| namespace rx |
| { |
| |
| namespace |
| { |
| GLint GetSampleCount(const egl::Config *config) |
| { |
| GLint samples = 1; |
| if (config->sampleBuffers && config->samples > 1) |
| { |
| samples = config->samples; |
| } |
| return samples; |
| } |
| |
| VkPresentModeKHR GetDesiredPresentMode(const std::vector<VkPresentModeKHR> &presentModes, |
| EGLint interval) |
| { |
| ASSERT(!presentModes.empty()); |
| |
| // If v-sync is enabled, use FIFO, which throttles you to the display rate and is guaranteed to |
| // always be supported. |
| if (interval > 0) |
| { |
| return VK_PRESENT_MODE_FIFO_KHR; |
| } |
| |
| // Otherwise, choose either of the following, if available, in order specified here: |
| // |
| // - Mailbox is similar to triple-buffering. |
| // - Immediate is similar to single-buffering. |
| // |
| // If neither is supported, we fallback to FIFO. |
| |
| bool mailboxAvailable = false; |
| bool immediateAvailable = false; |
| |
| for (VkPresentModeKHR presentMode : presentModes) |
| { |
| switch (presentMode) |
| { |
| case VK_PRESENT_MODE_MAILBOX_KHR: |
| mailboxAvailable = true; |
| break; |
| case VK_PRESENT_MODE_IMMEDIATE_KHR: |
| immediateAvailable = true; |
| break; |
| default: |
| break; |
| } |
| } |
| |
| if (immediateAvailable) |
| { |
| return VK_PRESENT_MODE_IMMEDIATE_KHR; |
| } |
| |
| if (mailboxAvailable) |
| { |
| return VK_PRESENT_MODE_MAILBOX_KHR; |
| } |
| |
| // Note again that VK_PRESENT_MODE_FIFO_KHR is guaranteed to be available. |
| return VK_PRESENT_MODE_FIFO_KHR; |
| } |
| |
| constexpr VkImageUsageFlags kSurfaceVKImageUsageFlags = |
| VK_IMAGE_USAGE_TRANSFER_DST_BIT | VK_IMAGE_USAGE_TRANSFER_SRC_BIT | VK_IMAGE_USAGE_SAMPLED_BIT; |
| constexpr VkImageUsageFlags kSurfaceVKColorImageUsageFlags = |
| kSurfaceVKImageUsageFlags | VK_IMAGE_USAGE_COLOR_ATTACHMENT_BIT; |
| constexpr VkImageUsageFlags kSurfaceVKDepthStencilImageUsageFlags = |
| kSurfaceVKImageUsageFlags | VK_IMAGE_USAGE_DEPTH_STENCIL_ATTACHMENT_BIT; |
| |
| } // namespace |
| |
| SurfaceVk::SurfaceVk(const egl::SurfaceState &surfaceState) : SurfaceImpl(surfaceState) {} |
| |
| SurfaceVk::~SurfaceVk() = default; |
| |
| angle::Result SurfaceVk::getAttachmentRenderTarget(const gl::Context *context, |
| GLenum binding, |
| const gl::ImageIndex &imageIndex, |
| GLsizei samples, |
| FramebufferAttachmentRenderTarget **rtOut) |
| { |
| ContextVk *contextVk = vk::GetImpl(context); |
| |
| if (binding == GL_BACK) |
| { |
| ANGLE_TRY(mColorRenderTarget.flushStagedUpdates(contextVk)); |
| *rtOut = &mColorRenderTarget; |
| } |
| else |
| { |
| ASSERT(binding == GL_DEPTH || binding == GL_STENCIL || binding == GL_DEPTH_STENCIL); |
| ANGLE_TRY(mDepthStencilRenderTarget.flushStagedUpdates(contextVk)); |
| *rtOut = &mDepthStencilRenderTarget; |
| } |
| |
| return angle::Result::Continue; |
| } |
| |
| OffscreenSurfaceVk::AttachmentImage::AttachmentImage() {} |
| |
| OffscreenSurfaceVk::AttachmentImage::~AttachmentImage() = default; |
| |
| angle::Result OffscreenSurfaceVk::AttachmentImage::initialize(DisplayVk *displayVk, |
| EGLint width, |
| EGLint height, |
| const vk::Format &vkFormat, |
| GLint samples) |
| { |
| RendererVk *renderer = displayVk->getRenderer(); |
| |
| const angle::Format &textureFormat = vkFormat.imageFormat(); |
| bool isDepthOrStencilFormat = textureFormat.depthBits > 0 || textureFormat.stencilBits > 0; |
| const VkImageUsageFlags usage = isDepthOrStencilFormat ? kSurfaceVKDepthStencilImageUsageFlags |
| : kSurfaceVKColorImageUsageFlags; |
| |
| VkExtent3D extents = {std::max(static_cast<uint32_t>(width), 1u), |
| std::max(static_cast<uint32_t>(height), 1u), 1u}; |
| ANGLE_TRY( |
| image.init(displayVk, gl::TextureType::_2D, extents, vkFormat, samples, usage, 0, 0, 1, 1)); |
| |
| VkMemoryPropertyFlags flags = VK_MEMORY_PROPERTY_DEVICE_LOCAL_BIT; |
| ANGLE_TRY(image.initMemory(displayVk, renderer->getMemoryProperties(), flags)); |
| |
| VkImageAspectFlags aspect = vk::GetFormatAspectFlags(textureFormat); |
| |
| ANGLE_TRY(image.initImageView(displayVk, gl::TextureType::_2D, aspect, gl::SwizzleState(), |
| &imageView, 0, 1)); |
| |
| // Clear the image if it has emulated channels. |
| image.stageClearIfEmulatedFormat(gl::ImageIndex::Make2D(0), vkFormat); |
| |
| return angle::Result::Continue; |
| } |
| |
| void OffscreenSurfaceVk::AttachmentImage::destroy(const egl::Display *display) |
| { |
| DisplayVk *displayVk = vk::GetImpl(display); |
| VkDevice device = displayVk->getDevice(); |
| |
| // It should be safe to immediately destroy the backing images of a surface on surface |
| // destruction. If this assumption is incorrect, we could use the last submit serial |
| // to determine when to destroy the surface. |
| image.destroy(device); |
| imageView.destroy(device); |
| } |
| |
| OffscreenSurfaceVk::OffscreenSurfaceVk(const egl::SurfaceState &surfaceState, |
| EGLint width, |
| EGLint height) |
| : SurfaceVk(surfaceState), mWidth(width), mHeight(height) |
| { |
| mColorRenderTarget.init(&mColorAttachment.image, &mColorAttachment.imageView, 0, 0); |
| mDepthStencilRenderTarget.init(&mDepthStencilAttachment.image, |
| &mDepthStencilAttachment.imageView, 0, 0); |
| } |
| |
| OffscreenSurfaceVk::~OffscreenSurfaceVk() {} |
| |
| egl::Error OffscreenSurfaceVk::initialize(const egl::Display *display) |
| { |
| DisplayVk *displayVk = vk::GetImpl(display); |
| angle::Result result = initializeImpl(displayVk); |
| return angle::ToEGL(result, displayVk, EGL_BAD_SURFACE); |
| } |
| |
| angle::Result OffscreenSurfaceVk::initializeImpl(DisplayVk *displayVk) |
| { |
| RendererVk *renderer = displayVk->getRenderer(); |
| const egl::Config *config = mState.config; |
| |
| GLint samples = GetSampleCount(mState.config); |
| ANGLE_VK_CHECK(displayVk, samples > 0, VK_ERROR_INITIALIZATION_FAILED); |
| |
| if (config->renderTargetFormat != GL_NONE) |
| { |
| ANGLE_TRY(mColorAttachment.initialize( |
| displayVk, mWidth, mHeight, renderer->getFormat(config->renderTargetFormat), samples)); |
| } |
| |
| if (config->depthStencilFormat != GL_NONE) |
| { |
| ANGLE_TRY(mDepthStencilAttachment.initialize( |
| displayVk, mWidth, mHeight, renderer->getFormat(config->depthStencilFormat), samples)); |
| } |
| |
| return angle::Result::Continue; |
| } |
| |
| void OffscreenSurfaceVk::destroy(const egl::Display *display) |
| { |
| mColorAttachment.destroy(display); |
| mDepthStencilAttachment.destroy(display); |
| } |
| |
| FramebufferImpl *OffscreenSurfaceVk::createDefaultFramebuffer(const gl::Context *context, |
| const gl::FramebufferState &state) |
| { |
| RendererVk *renderer = vk::GetImpl(context)->getRenderer(); |
| |
| // Use a user FBO for an offscreen RT. |
| return FramebufferVk::CreateUserFBO(renderer, state); |
| } |
| |
| egl::Error OffscreenSurfaceVk::swap(const gl::Context *context) |
| { |
| return egl::NoError(); |
| } |
| |
| egl::Error OffscreenSurfaceVk::postSubBuffer(const gl::Context * /*context*/, |
| EGLint /*x*/, |
| EGLint /*y*/, |
| EGLint /*width*/, |
| EGLint /*height*/) |
| { |
| return egl::NoError(); |
| } |
| |
| egl::Error OffscreenSurfaceVk::querySurfacePointerANGLE(EGLint /*attribute*/, void ** /*value*/) |
| { |
| UNREACHABLE(); |
| return egl::EglBadCurrentSurface(); |
| } |
| |
| egl::Error OffscreenSurfaceVk::bindTexImage(const gl::Context * /*context*/, |
| gl::Texture * /*texture*/, |
| EGLint /*buffer*/) |
| { |
| return egl::NoError(); |
| } |
| |
| egl::Error OffscreenSurfaceVk::releaseTexImage(const gl::Context * /*context*/, EGLint /*buffer*/) |
| { |
| return egl::NoError(); |
| } |
| |
| egl::Error OffscreenSurfaceVk::getSyncValues(EGLuint64KHR * /*ust*/, |
| EGLuint64KHR * /*msc*/, |
| EGLuint64KHR * /*sbc*/) |
| { |
| UNIMPLEMENTED(); |
| return egl::EglBadAccess(); |
| } |
| |
| void OffscreenSurfaceVk::setSwapInterval(EGLint /*interval*/) {} |
| |
| EGLint OffscreenSurfaceVk::getWidth() const |
| { |
| return mWidth; |
| } |
| |
| EGLint OffscreenSurfaceVk::getHeight() const |
| { |
| return mHeight; |
| } |
| |
| EGLint OffscreenSurfaceVk::isPostSubBufferSupported() const |
| { |
| return EGL_FALSE; |
| } |
| |
| EGLint OffscreenSurfaceVk::getSwapBehavior() const |
| { |
| return EGL_BUFFER_DESTROYED; |
| } |
| |
| angle::Result OffscreenSurfaceVk::initializeContents(const gl::Context *context, |
| const gl::ImageIndex &imageIndex) |
| { |
| ContextVk *contextVk = vk::GetImpl(context); |
| |
| if (mColorAttachment.image.valid()) |
| { |
| mColorAttachment.image.stageSubresourceRobustClear( |
| imageIndex, mColorAttachment.image.getFormat().angleFormat()); |
| ANGLE_TRY(mColorAttachment.image.flushAllStagedUpdates(contextVk)); |
| } |
| |
| if (mDepthStencilAttachment.image.valid()) |
| { |
| mDepthStencilAttachment.image.stageSubresourceRobustClear( |
| imageIndex, mDepthStencilAttachment.image.getFormat().angleFormat()); |
| ANGLE_TRY(mDepthStencilAttachment.image.flushAllStagedUpdates(contextVk)); |
| } |
| return angle::Result::Continue; |
| } |
| |
| vk::ImageHelper *OffscreenSurfaceVk::getColorAttachmentImage() |
| { |
| return &mColorAttachment.image; |
| } |
| |
| namespace impl |
| { |
| SwapchainCleanupData::SwapchainCleanupData() = default; |
| SwapchainCleanupData::~SwapchainCleanupData() |
| { |
| ASSERT(swapchain == VK_NULL_HANDLE); |
| ASSERT(semaphores.empty()); |
| } |
| |
| SwapchainCleanupData::SwapchainCleanupData(SwapchainCleanupData &&other) |
| : swapchain(other.swapchain), semaphores(std::move(other.semaphores)) |
| { |
| other.swapchain = VK_NULL_HANDLE; |
| } |
| |
| void SwapchainCleanupData::destroy(VkDevice device, vk::Recycler<vk::Semaphore> *semaphoreRecycler) |
| { |
| if (swapchain) |
| { |
| vkDestroySwapchainKHR(device, swapchain, nullptr); |
| swapchain = VK_NULL_HANDLE; |
| } |
| |
| for (vk::Semaphore &semaphore : semaphores) |
| { |
| semaphoreRecycler->recycle(std::move(semaphore)); |
| } |
| semaphores.clear(); |
| } |
| |
| ImagePresentHistory::ImagePresentHistory() = default; |
| ImagePresentHistory::~ImagePresentHistory() |
| { |
| ASSERT(!semaphore.valid()); |
| ASSERT(oldSwapchains.empty()); |
| } |
| |
| ImagePresentHistory::ImagePresentHistory(ImagePresentHistory &&other) |
| : semaphore(std::move(other.semaphore)), oldSwapchains(std::move(other.oldSwapchains)) |
| {} |
| |
| SwapchainImage::SwapchainImage() = default; |
| SwapchainImage::~SwapchainImage() = default; |
| |
| SwapchainImage::SwapchainImage(SwapchainImage &&other) |
| : image(std::move(other.image)), |
| imageView(std::move(other.imageView)), |
| framebuffer(std::move(other.framebuffer)), |
| presentHistory(std::move(other.presentHistory)), |
| currentPresentHistoryIndex(other.currentPresentHistoryIndex) |
| {} |
| |
| SwapHistory::SwapHistory() = default; |
| |
| SwapHistory::~SwapHistory() = default; |
| |
| void SwapHistory::destroy(RendererVk *renderer) |
| { |
| renderer->resetSharedFence(&sharedFence); |
| } |
| |
| angle::Result SwapHistory::waitFence(ContextVk *contextVk) |
| { |
| ASSERT(sharedFence.isReferenced()); |
| ANGLE_VK_TRY(contextVk, sharedFence.get().wait(contextVk->getDevice(), |
| std::numeric_limits<uint64_t>::max())); |
| return angle::Result::Continue; |
| } |
| } // namespace impl |
| |
| using namespace impl; |
| |
| WindowSurfaceVk::WindowSurfaceVk(const egl::SurfaceState &surfaceState, |
| EGLNativeWindowType window, |
| EGLint width, |
| EGLint height) |
| : SurfaceVk(surfaceState), |
| mNativeWindowType(window), |
| mSurface(VK_NULL_HANDLE), |
| mInstance(VK_NULL_HANDLE), |
| mSwapchain(VK_NULL_HANDLE), |
| mSwapchainPresentMode(VK_PRESENT_MODE_FIFO_KHR), |
| mDesiredSwapchainPresentMode(VK_PRESENT_MODE_FIFO_KHR), |
| mMinImageCount(0), |
| mPreTransform(VK_SURFACE_TRANSFORM_IDENTITY_BIT_KHR), |
| mCompositeAlpha(VK_COMPOSITE_ALPHA_OPAQUE_BIT_KHR), |
| mCurrentSwapHistoryIndex(0), |
| mCurrentSwapchainImageIndex(0) |
| { |
| // Initialize the color render target with the multisampled targets. If not multisampled, the |
| // render target will be updated to refer to a swapchain image on every acquire. |
| mColorRenderTarget.init(&mColorImageMS, &mColorImageViewMS, 0, 0); |
| mDepthStencilRenderTarget.init(&mDepthStencilImage, &mDepthStencilImageView, 0, 0); |
| } |
| |
| WindowSurfaceVk::~WindowSurfaceVk() |
| { |
| ASSERT(mSurface == VK_NULL_HANDLE); |
| ASSERT(mSwapchain == VK_NULL_HANDLE); |
| } |
| |
| void WindowSurfaceVk::destroy(const egl::Display *display) |
| { |
| DisplayVk *displayVk = vk::GetImpl(display); |
| RendererVk *renderer = displayVk->getRenderer(); |
| VkDevice device = renderer->getDevice(); |
| VkInstance instance = renderer->getInstance(); |
| |
| // We might not need to flush the pipe here. |
| (void)renderer->queueWaitIdle(displayVk); |
| |
| destroySwapChainImages(displayVk); |
| |
| for (SwapHistory &swap : mSwapHistory) |
| { |
| swap.destroy(renderer); |
| } |
| |
| if (mSwapchain) |
| { |
| vkDestroySwapchainKHR(device, mSwapchain, nullptr); |
| mSwapchain = VK_NULL_HANDLE; |
| } |
| |
| for (SwapchainCleanupData &oldSwapchain : mOldSwapchains) |
| { |
| oldSwapchain.destroy(device, &mPresentSemaphoreRecycler); |
| } |
| mOldSwapchains.clear(); |
| |
| if (mSurface) |
| { |
| vkDestroySurfaceKHR(instance, mSurface, nullptr); |
| mSurface = VK_NULL_HANDLE; |
| } |
| |
| mAcquireImageSemaphore.destroy(device); |
| mPresentSemaphoreRecycler.destroy(device); |
| } |
| |
| egl::Error WindowSurfaceVk::initialize(const egl::Display *display) |
| { |
| DisplayVk *displayVk = vk::GetImpl(display); |
| angle::Result result = initializeImpl(displayVk); |
| return angle::ToEGL(result, displayVk, EGL_BAD_SURFACE); |
| } |
| |
| angle::Result WindowSurfaceVk::initializeImpl(DisplayVk *displayVk) |
| { |
| RendererVk *renderer = displayVk->getRenderer(); |
| |
| gl::Extents windowSize; |
| ANGLE_TRY(createSurfaceVk(displayVk, &windowSize)); |
| |
| uint32_t presentQueue = 0; |
| ANGLE_TRY(renderer->selectPresentQueueForSurface(displayVk, mSurface, &presentQueue)); |
| ANGLE_UNUSED_VARIABLE(presentQueue); |
| |
| const VkPhysicalDevice &physicalDevice = renderer->getPhysicalDevice(); |
| |
| ANGLE_VK_TRY(displayVk, vkGetPhysicalDeviceSurfaceCapabilitiesKHR(physicalDevice, mSurface, |
| &mSurfaceCaps)); |
| |
| // Adjust width and height to the swapchain if necessary. |
| uint32_t width = mSurfaceCaps.currentExtent.width; |
| uint32_t height = mSurfaceCaps.currentExtent.height; |
| |
| // TODO(jmadill): Support devices which don't support copy. We use this for ReadPixels. |
| ANGLE_VK_CHECK(displayVk, |
| (mSurfaceCaps.supportedUsageFlags & kSurfaceVKColorImageUsageFlags) == |
| kSurfaceVKColorImageUsageFlags, |
| VK_ERROR_INITIALIZATION_FAILED); |
| |
| EGLAttrib attribWidth = mState.attributes.get(EGL_WIDTH, 0); |
| EGLAttrib attribHeight = mState.attributes.get(EGL_HEIGHT, 0); |
| |
| if (mSurfaceCaps.currentExtent.width == 0xFFFFFFFFu) |
| { |
| ASSERT(mSurfaceCaps.currentExtent.height == 0xFFFFFFFFu); |
| |
| width = (attribWidth != 0) ? static_cast<uint32_t>(attribWidth) : windowSize.width; |
| height = (attribHeight != 0) ? static_cast<uint32_t>(attribHeight) : windowSize.height; |
| } |
| |
| gl::Extents extents(static_cast<int>(width), static_cast<int>(height), 1); |
| |
| uint32_t presentModeCount = 0; |
| ANGLE_VK_TRY(displayVk, vkGetPhysicalDeviceSurfacePresentModesKHR(physicalDevice, mSurface, |
| &presentModeCount, nullptr)); |
| ASSERT(presentModeCount > 0); |
| |
| mPresentModes.resize(presentModeCount); |
| ANGLE_VK_TRY(displayVk, vkGetPhysicalDeviceSurfacePresentModesKHR( |
| physicalDevice, mSurface, &presentModeCount, mPresentModes.data())); |
| |
| // Select appropriate present mode based on vsync parameter. Default to 1 (FIFO), though it |
| // will get clamped to the min/max values specified at display creation time. |
| setSwapInterval(renderer->getFeatures().disableFifoPresentMode.enabled ? 0 : 1); |
| |
| // Default to identity transform. |
| mPreTransform = VK_SURFACE_TRANSFORM_IDENTITY_BIT_KHR; |
| if ((mSurfaceCaps.supportedTransforms & mPreTransform) == 0) |
| { |
| mPreTransform = mSurfaceCaps.currentTransform; |
| } |
| |
| uint32_t surfaceFormatCount = 0; |
| ANGLE_VK_TRY(displayVk, vkGetPhysicalDeviceSurfaceFormatsKHR(physicalDevice, mSurface, |
| &surfaceFormatCount, nullptr)); |
| |
| std::vector<VkSurfaceFormatKHR> surfaceFormats(surfaceFormatCount); |
| ANGLE_VK_TRY(displayVk, |
| vkGetPhysicalDeviceSurfaceFormatsKHR(physicalDevice, mSurface, &surfaceFormatCount, |
| surfaceFormats.data())); |
| |
| const vk::Format &format = renderer->getFormat(mState.config->renderTargetFormat); |
| VkFormat nativeFormat = format.vkImageFormat; |
| |
| if (surfaceFormatCount == 1u && surfaceFormats[0].format == VK_FORMAT_UNDEFINED) |
| { |
| // This is fine. |
| } |
| else |
| { |
| bool foundFormat = false; |
| for (const VkSurfaceFormatKHR &surfaceFormat : surfaceFormats) |
| { |
| if (surfaceFormat.format == nativeFormat) |
| { |
| foundFormat = true; |
| break; |
| } |
| } |
| |
| ANGLE_VK_CHECK(displayVk, foundFormat, VK_ERROR_INITIALIZATION_FAILED); |
| } |
| |
| mCompositeAlpha = VK_COMPOSITE_ALPHA_OPAQUE_BIT_KHR; |
| if ((mSurfaceCaps.supportedCompositeAlpha & mCompositeAlpha) == 0) |
| { |
| mCompositeAlpha = VK_COMPOSITE_ALPHA_INHERIT_BIT_KHR; |
| } |
| ANGLE_VK_CHECK(displayVk, (mSurfaceCaps.supportedCompositeAlpha & mCompositeAlpha) != 0, |
| VK_ERROR_INITIALIZATION_FAILED); |
| |
| ANGLE_TRY(createSwapChain(displayVk, extents, VK_NULL_HANDLE)); |
| |
| VkResult vkResult = nextSwapchainImage(displayVk); |
| // VK_SUBOPTIMAL_KHR is ok since we still have an Image that can be presented successfully |
| if (ANGLE_UNLIKELY((vkResult != VK_SUCCESS) && (vkResult != VK_SUBOPTIMAL_KHR))) |
| { |
| ANGLE_VK_TRY(displayVk, vkResult); |
| } |
| |
| return angle::Result::Continue; |
| } |
| |
| angle::Result WindowSurfaceVk::recreateSwapchain(ContextVk *contextVk, |
| const gl::Extents &extents, |
| uint32_t swapHistoryIndex) |
| { |
| // If mOldSwapchains is not empty, it means that a new swapchain was created, but before |
| // any of its images were presented, it's asked to be recreated. In this case, we can destroy |
| // the current swapchain immediately (although the old swapchains still need to be kept to be |
| // scheduled for destruction). This can happen for example if vkQueuePresentKHR returns |
| // OUT_OF_DATE, the swapchain is recreated and the following vkAcquireNextImageKHR again |
| // returns OUT_OF_DATE. |
| // |
| // Otherwise, keep the current swapchain as the old swapchain to be scheduled for destruction |
| // and create a new one. |
| |
| VkSwapchainKHR swapchainToDestroy = VK_NULL_HANDLE; |
| |
| if (!mOldSwapchains.empty()) |
| { |
| // Keep the old swapchain, destroy the current (never-used) swapchain. |
| swapchainToDestroy = mSwapchain; |
| |
| // Recycle present semaphores. |
| for (SwapchainImage &swapchainImage : mSwapchainImages) |
| { |
| for (ImagePresentHistory &presentHistory : swapchainImage.presentHistory) |
| { |
| ASSERT(presentHistory.semaphore.valid()); |
| ASSERT(presentHistory.oldSwapchains.empty()); |
| |
| mPresentSemaphoreRecycler.recycle(std::move(presentHistory.semaphore)); |
| } |
| } |
| } |
| else |
| { |
| SwapchainCleanupData cleanupData; |
| |
| // Remember the current swapchain to be scheduled for destruction later. |
| cleanupData.swapchain = mSwapchain; |
| |
| // Accumulate the semaphores to be destroyed at the same time as the swapchain. |
| for (SwapchainImage &swapchainImage : mSwapchainImages) |
| { |
| for (ImagePresentHistory &presentHistory : swapchainImage.presentHistory) |
| { |
| ASSERT(presentHistory.semaphore.valid()); |
| cleanupData.semaphores.emplace_back(std::move(presentHistory.semaphore)); |
| |
| // Accumulate any previous swapchains that are pending destruction too. |
| for (SwapchainCleanupData &oldSwapchain : presentHistory.oldSwapchains) |
| { |
| mOldSwapchains.emplace_back(std::move(oldSwapchain)); |
| } |
| presentHistory.oldSwapchains.clear(); |
| } |
| } |
| |
| // If too many old swapchains have accumulated, wait idle and destroy them. This is to |
| // prevent failures due to too many swapchains allocated. |
| // |
| // Note: Nvidia has been observed to fail creation of swapchains after 20 are allocated on |
| // desktop, or less than 10 on Quadro P400. |
| static constexpr size_t kMaxOldSwapchains = 5; |
| if (mOldSwapchains.size() > kMaxOldSwapchains) |
| { |
| ANGLE_TRY(contextVk->getRenderer()->queueWaitIdle(contextVk)); |
| for (SwapchainCleanupData &oldSwapchain : mOldSwapchains) |
| { |
| oldSwapchain.destroy(contextVk->getDevice(), &mPresentSemaphoreRecycler); |
| } |
| mOldSwapchains.clear(); |
| } |
| |
| mOldSwapchains.emplace_back(std::move(cleanupData)); |
| } |
| |
| // Recreate the swapchain based on the most recent one. |
| VkSwapchainKHR lastSwapchain = mSwapchain; |
| mSwapchain = VK_NULL_HANDLE; |
| |
| releaseSwapchainImages(contextVk); |
| |
| angle::Result result = createSwapChain(contextVk, extents, lastSwapchain); |
| |
| // If the most recent swapchain was never used, destroy it right now. |
| if (swapchainToDestroy) |
| { |
| vkDestroySwapchainKHR(contextVk->getDevice(), swapchainToDestroy, nullptr); |
| } |
| |
| return result; |
| } |
| |
| angle::Result WindowSurfaceVk::newPresentSemaphore(vk::Context *context, |
| vk::Semaphore *semaphoreOut) |
| { |
| if (mPresentSemaphoreRecycler.empty()) |
| { |
| ANGLE_VK_TRY(context, semaphoreOut->init(context->getDevice())); |
| } |
| else |
| { |
| mPresentSemaphoreRecycler.fetch(semaphoreOut); |
| } |
| return angle::Result::Continue; |
| } |
| |
| angle::Result WindowSurfaceVk::resizeSwapchainImages(vk::Context *context, uint32_t imageCount) |
| { |
| mSwapchainImages.resize(imageCount); |
| |
| // At this point, if there was a previous swapchain, the previous present semaphores have all |
| // been moved to mOldSwapchains to be scheduled for destruction, so all semaphore handles in |
| // mSwapchainImages should be invalid. |
| for (SwapchainImage &swapchainImage : mSwapchainImages) |
| { |
| for (ImagePresentHistory &presentHistory : swapchainImage.presentHistory) |
| { |
| ASSERT(!presentHistory.semaphore.valid()); |
| ANGLE_TRY(newPresentSemaphore(context, &presentHistory.semaphore)); |
| } |
| } |
| |
| return angle::Result::Continue; |
| } |
| |
| angle::Result WindowSurfaceVk::createSwapChain(vk::Context *context, |
| const gl::Extents &extents, |
| VkSwapchainKHR lastSwapchain) |
| { |
| ANGLE_TRACE_EVENT0("gpu.angle", "WindowSurfaceVk::createSwapchain"); |
| |
| ASSERT(mSwapchain == VK_NULL_HANDLE); |
| |
| RendererVk *renderer = context->getRenderer(); |
| VkDevice device = renderer->getDevice(); |
| |
| const vk::Format &format = renderer->getFormat(mState.config->renderTargetFormat); |
| VkFormat nativeFormat = format.vkImageFormat; |
| |
| // We need transfer src for reading back from the backbuffer. |
| VkImageUsageFlags imageUsageFlags = kSurfaceVKColorImageUsageFlags; |
| |
| // We need storage image for compute writes (debug overlay output). |
| VkFormatFeatureFlags featureBits = |
| renderer->getImageFormatFeatureBits(nativeFormat, VK_FORMAT_FEATURE_STORAGE_IMAGE_BIT); |
| if ((featureBits & VK_FORMAT_FEATURE_STORAGE_IMAGE_BIT) != 0) |
| { |
| imageUsageFlags |= VK_IMAGE_USAGE_STORAGE_BIT; |
| } |
| |
| VkSwapchainCreateInfoKHR swapchainInfo = {}; |
| swapchainInfo.sType = VK_STRUCTURE_TYPE_SWAPCHAIN_CREATE_INFO_KHR; |
| swapchainInfo.flags = 0; |
| swapchainInfo.surface = mSurface; |
| swapchainInfo.minImageCount = mMinImageCount; |
| swapchainInfo.imageFormat = nativeFormat; |
| swapchainInfo.imageColorSpace = VK_COLORSPACE_SRGB_NONLINEAR_KHR; |
| // Note: Vulkan doesn't allow 0-width/height swapchains. |
| swapchainInfo.imageExtent.width = std::max(extents.width, 1); |
| swapchainInfo.imageExtent.height = std::max(extents.height, 1); |
| swapchainInfo.imageArrayLayers = 1; |
| swapchainInfo.imageUsage = imageUsageFlags; |
| swapchainInfo.imageSharingMode = VK_SHARING_MODE_EXCLUSIVE; |
| swapchainInfo.queueFamilyIndexCount = 0; |
| swapchainInfo.pQueueFamilyIndices = nullptr; |
| swapchainInfo.preTransform = mPreTransform; |
| swapchainInfo.compositeAlpha = mCompositeAlpha; |
| swapchainInfo.presentMode = mDesiredSwapchainPresentMode; |
| swapchainInfo.clipped = VK_TRUE; |
| swapchainInfo.oldSwapchain = lastSwapchain; |
| |
| // TODO(syoussefi): Once EGL_SWAP_BEHAVIOR_PRESERVED_BIT is supported, the contents of the old |
| // swapchain need to carry over to the new one. http://anglebug.com/2942 |
| ANGLE_VK_TRY(context, vkCreateSwapchainKHR(device, &swapchainInfo, nullptr, &mSwapchain)); |
| mSwapchainPresentMode = mDesiredSwapchainPresentMode; |
| |
| // Intialize the swapchain image views. |
| uint32_t imageCount = 0; |
| ANGLE_VK_TRY(context, vkGetSwapchainImagesKHR(device, mSwapchain, &imageCount, nullptr)); |
| |
| std::vector<VkImage> swapchainImages(imageCount); |
| ANGLE_VK_TRY(context, |
| vkGetSwapchainImagesKHR(device, mSwapchain, &imageCount, swapchainImages.data())); |
| |
| // If multisampling is enabled, create a multisampled image which gets resolved just prior to |
| // present. |
| GLint samples = GetSampleCount(mState.config); |
| ANGLE_VK_CHECK(context, samples > 0, VK_ERROR_INITIALIZATION_FAILED); |
| |
| VkExtent3D vkExtents; |
| gl_vk::GetExtent(extents, &vkExtents); |
| |
| if (samples > 1) |
| { |
| const VkImageUsageFlags usage = kSurfaceVKColorImageUsageFlags; |
| |
| ANGLE_TRY(mColorImageMS.init(context, gl::TextureType::_2D, vkExtents, format, samples, |
| usage, 0, 0, 1, 1)); |
| ANGLE_TRY(mColorImageMS.initMemory(context, renderer->getMemoryProperties(), |
| VK_MEMORY_PROPERTY_DEVICE_LOCAL_BIT)); |
| |
| ANGLE_TRY(mColorImageMS.initImageView(context, gl::TextureType::_2D, |
| VK_IMAGE_ASPECT_COLOR_BIT, gl::SwizzleState(), |
| &mColorImageViewMS, 0, 1)); |
| |
| // Clear the image if it has emulated channels. |
| mColorImageMS.stageClearIfEmulatedFormat(gl::ImageIndex::Make2D(0), format); |
| } |
| |
| ANGLE_TRY(resizeSwapchainImages(context, imageCount)); |
| |
| for (uint32_t imageIndex = 0; imageIndex < imageCount; ++imageIndex) |
| { |
| SwapchainImage &member = mSwapchainImages[imageIndex]; |
| member.image.init2DWeakReference(swapchainImages[imageIndex], extents, format, 1); |
| |
| if (!mColorImageMS.valid()) |
| { |
| // If the multisampled image is used, we don't need a view on the swapchain image, as |
| // it's only used as a resolve destination. This has the added benefit that we can't |
| // accidentally use this image. |
| ANGLE_TRY(member.image.initImageView(context, gl::TextureType::_2D, |
| VK_IMAGE_ASPECT_COLOR_BIT, gl::SwizzleState(), |
| &member.imageView, 0, 1)); |
| |
| // Clear the image if it has emulated channels. If a multisampled image exists, this |
| // image will be unused until a pre-present resolve, at which point it will be fully |
| // initialized and wouldn't need a clear. |
| member.image.stageClearIfEmulatedFormat(gl::ImageIndex::Make2D(0), format); |
| } |
| } |
| |
| // Initialize depth/stencil if requested. |
| if (mState.config->depthStencilFormat != GL_NONE) |
| { |
| const vk::Format &dsFormat = renderer->getFormat(mState.config->depthStencilFormat); |
| |
| const VkImageUsageFlags dsUsage = kSurfaceVKDepthStencilImageUsageFlags; |
| |
| ANGLE_TRY(mDepthStencilImage.init(context, gl::TextureType::_2D, vkExtents, dsFormat, |
| samples, dsUsage, 0, 0, 1, 1)); |
| ANGLE_TRY(mDepthStencilImage.initMemory(context, renderer->getMemoryProperties(), |
| VK_MEMORY_PROPERTY_DEVICE_LOCAL_BIT)); |
| |
| const VkImageAspectFlags aspect = vk::GetDepthStencilAspectFlags(dsFormat.imageFormat()); |
| |
| ANGLE_TRY(mDepthStencilImage.initImageView(context, gl::TextureType::_2D, aspect, |
| gl::SwizzleState(), &mDepthStencilImageView, 0, |
| 1)); |
| |
| // We will need to pass depth/stencil image views to the RenderTargetVk in the future. |
| |
| // Clear the image if it has emulated channels. |
| mDepthStencilImage.stageClearIfEmulatedFormat(gl::ImageIndex::Make2D(0), dsFormat); |
| } |
| |
| return angle::Result::Continue; |
| } |
| |
| bool WindowSurfaceVk::isMultiSampled() const |
| { |
| return mColorImageMS.valid(); |
| } |
| |
| angle::Result WindowSurfaceVk::checkForOutOfDateSwapchain(ContextVk *contextVk, |
| uint32_t swapHistoryIndex, |
| bool presentOutOfDate) |
| { |
| bool swapIntervalChanged = mSwapchainPresentMode != mDesiredSwapchainPresentMode; |
| |
| // If anything has changed, recreate the swapchain. |
| if (swapIntervalChanged || presentOutOfDate || |
| contextVk->getRenderer()->getFeatures().perFrameWindowSizeQuery.enabled) |
| { |
| gl::Extents swapchainExtents(getWidth(), getHeight(), 1); |
| |
| gl::Extents currentExtents; |
| ANGLE_TRY(getCurrentWindowSize(contextVk, ¤tExtents)); |
| |
| // If window size has changed, check with surface capabilities. It has been observed on |
| // Android that `getCurrentWindowSize()` returns 1920x1080 for example, while surface |
| // capabilities returns the size the surface was created with. |
| if (currentExtents != swapchainExtents) |
| { |
| const VkPhysicalDevice &physicalDevice = contextVk->getRenderer()->getPhysicalDevice(); |
| ANGLE_VK_TRY(contextVk, vkGetPhysicalDeviceSurfaceCapabilitiesKHR( |
| physicalDevice, mSurface, &mSurfaceCaps)); |
| |
| uint32_t width = mSurfaceCaps.currentExtent.width; |
| uint32_t height = mSurfaceCaps.currentExtent.height; |
| |
| if (width != 0xFFFFFFFFu) |
| { |
| ASSERT(height != 0xFFFFFFFFu); |
| currentExtents.width = width; |
| currentExtents.height = height; |
| } |
| } |
| |
| // Check for window resize and recreate swapchain if necessary. |
| // Work-around for some device which does not return OUT_OF_DATE after window resizing |
| if (swapIntervalChanged || presentOutOfDate || currentExtents != swapchainExtents) |
| { |
| ANGLE_TRY(recreateSwapchain(contextVk, currentExtents, swapHistoryIndex)); |
| } |
| } |
| |
| return angle::Result::Continue; |
| } |
| |
| void WindowSurfaceVk::releaseSwapchainImages(ContextVk *contextVk) |
| { |
| RendererVk *renderer = contextVk->getRenderer(); |
| |
| if (mDepthStencilImage.valid()) |
| { |
| mDepthStencilImage.releaseImage(renderer); |
| mDepthStencilImage.releaseStagingBuffer(renderer); |
| |
| if (mDepthStencilImageView.valid()) |
| { |
| contextVk->addGarbage(&mDepthStencilImageView); |
| } |
| } |
| |
| if (mColorImageMS.valid()) |
| { |
| mColorImageMS.releaseImage(renderer); |
| mColorImageMS.releaseStagingBuffer(renderer); |
| |
| contextVk->addGarbage(&mColorImageViewMS); |
| contextVk->addGarbage(&mFramebufferMS); |
| } |
| |
| for (SwapchainImage &swapchainImage : mSwapchainImages) |
| { |
| // We don't own the swapchain image handles, so we just remove our reference to it. |
| swapchainImage.image.resetImageWeakReference(); |
| swapchainImage.image.destroy(contextVk->getDevice()); |
| |
| contextVk->addGarbage(&swapchainImage.imageView); |
| contextVk->addGarbage(&swapchainImage.framebuffer); |
| |
| // present history must have already been taken care of. |
| for (ImagePresentHistory &presentHistory : swapchainImage.presentHistory) |
| { |
| ASSERT(!presentHistory.semaphore.valid()); |
| ASSERT(presentHistory.oldSwapchains.empty()); |
| } |
| } |
| |
| mSwapchainImages.clear(); |
| } |
| |
| void WindowSurfaceVk::destroySwapChainImages(DisplayVk *displayVk) |
| { |
| VkDevice device = displayVk->getDevice(); |
| |
| mDepthStencilImage.destroy(device); |
| mDepthStencilImageView.destroy(device); |
| mColorImageMS.destroy(device); |
| mColorImageViewMS.destroy(device); |
| mFramebufferMS.destroy(device); |
| |
| for (SwapchainImage &swapchainImage : mSwapchainImages) |
| { |
| // We don't own the swapchain image handles, so we just remove our reference to it. |
| swapchainImage.image.resetImageWeakReference(); |
| swapchainImage.image.destroy(device); |
| swapchainImage.imageView.destroy(device); |
| swapchainImage.framebuffer.destroy(device); |
| |
| for (ImagePresentHistory &presentHistory : swapchainImage.presentHistory) |
| { |
| ASSERT(presentHistory.semaphore.valid()); |
| |
| mPresentSemaphoreRecycler.recycle(std::move(presentHistory.semaphore)); |
| for (SwapchainCleanupData &oldSwapchain : presentHistory.oldSwapchains) |
| { |
| oldSwapchain.destroy(device, &mPresentSemaphoreRecycler); |
| } |
| presentHistory.oldSwapchains.clear(); |
| } |
| } |
| |
| mSwapchainImages.clear(); |
| } |
| |
| FramebufferImpl *WindowSurfaceVk::createDefaultFramebuffer(const gl::Context *context, |
| const gl::FramebufferState &state) |
| { |
| RendererVk *renderer = vk::GetImpl(context)->getRenderer(); |
| return FramebufferVk::CreateDefaultFBO(renderer, state, this); |
| } |
| |
| egl::Error WindowSurfaceVk::swapWithDamage(const gl::Context *context, |
| EGLint *rects, |
| EGLint n_rects) |
| { |
| DisplayVk *displayVk = vk::GetImpl(context->getDisplay()); |
| angle::Result result = swapImpl(context, rects, n_rects); |
| return angle::ToEGL(result, displayVk, EGL_BAD_SURFACE); |
| } |
| |
| egl::Error WindowSurfaceVk::swap(const gl::Context *context) |
| { |
| DisplayVk *displayVk = vk::GetImpl(context->getDisplay()); |
| angle::Result result = swapImpl(context, nullptr, 0); |
| return angle::ToEGL(result, displayVk, EGL_BAD_SURFACE); |
| } |
| |
| angle::Result WindowSurfaceVk::present(ContextVk *contextVk, |
| EGLint *rects, |
| EGLint n_rects, |
| bool *presentOutOfDate) |
| { |
| ANGLE_TRACE_EVENT0("gpu.angle", "WindowSurfaceVk::present"); |
| |
| // Throttle the submissions to avoid getting too far ahead of the GPU. |
| SwapHistory &swap = mSwapHistory[mCurrentSwapHistoryIndex]; |
| { |
| ANGLE_TRACE_EVENT0("gpu.angle", "WindowSurfaceVk::present: Throttle CPU"); |
| if (swap.sharedFence.isReferenced()) |
| { |
| ANGLE_TRY(swap.waitFence(contextVk)); |
| swap.destroy(contextVk->getRenderer()); |
| } |
| } |
| |
| SwapchainImage &image = mSwapchainImages[mCurrentSwapchainImageIndex]; |
| |
| if (mColorImageMS.valid()) |
| { |
| // Transition the multisampled image to TRANSFER_SRC for resolve. |
| vk::CommandBuffer *multisampledTransition = nullptr; |
| ANGLE_TRY(mColorImageMS.recordCommands(contextVk, &multisampledTransition)); |
| |
| mColorImageMS.changeLayout(VK_IMAGE_ASPECT_COLOR_BIT, vk::ImageLayout::TransferSrc, |
| multisampledTransition); |
| |
| // Setup graph dependency between the swapchain image and the multisampled one. |
| image.image.addReadDependency(contextVk, &mColorImageMS); |
| |
| VkImageResolve resolveRegion = {}; |
| resolveRegion.srcSubresource.aspectMask = VK_IMAGE_ASPECT_COLOR_BIT; |
| resolveRegion.srcSubresource.mipLevel = 0; |
| resolveRegion.srcSubresource.baseArrayLayer = 0; |
| resolveRegion.srcSubresource.layerCount = 1; |
| resolveRegion.srcOffset = {}; |
| resolveRegion.dstSubresource = resolveRegion.srcSubresource; |
| resolveRegion.dstOffset = {}; |
| resolveRegion.extent = image.image.getExtents(); |
| |
| vk::CommandBuffer *resolveCommands = nullptr; |
| ANGLE_TRY(image.image.recordCommands(contextVk, &resolveCommands)); |
| mColorImageMS.resolve(&image.image, resolveRegion, resolveCommands); |
| } |
| |
| ANGLE_TRY(updateAndDrawOverlay(contextVk, &image)); |
| |
| vk::CommandBuffer *transitionCommands = nullptr; |
| ANGLE_TRY(image.image.recordCommands(contextVk, &transitionCommands)); |
| image.image.changeLayout(VK_IMAGE_ASPECT_COLOR_BIT, vk::ImageLayout::Present, |
| transitionCommands); |
| |
| // Knowing that the kSwapHistorySize'th submission ago has finished, we can know that the |
| // (kSwapHistorySize+1)'th present ago of this image is definitely finished and so its wait |
| // semaphore can be reused. See doc/PresentSemaphores.md for details. |
| // |
| // This also means the swapchain(s) scheduled to be deleted at the same time can be deleted. |
| ImagePresentHistory &presentHistory = image.presentHistory[image.currentPresentHistoryIndex]; |
| vk::Semaphore *presentSemaphore = &presentHistory.semaphore; |
| ASSERT(presentSemaphore->valid()); |
| |
| for (SwapchainCleanupData &oldSwapchain : presentHistory.oldSwapchains) |
| { |
| oldSwapchain.destroy(contextVk->getDevice(), &mPresentSemaphoreRecycler); |
| } |
| presentHistory.oldSwapchains.clear(); |
| |
| // Schedule pending old swapchains to be destroyed at the same time the semaphore for this |
| // present can be destroyed. |
| presentHistory.oldSwapchains = std::move(mOldSwapchains); |
| |
| image.currentPresentHistoryIndex = |
| (image.currentPresentHistoryIndex + 1) % image.presentHistory.size(); |
| |
| ANGLE_TRY(contextVk->flushImpl(presentSemaphore)); |
| |
| VkPresentInfoKHR presentInfo = {}; |
| presentInfo.sType = VK_STRUCTURE_TYPE_PRESENT_INFO_KHR; |
| presentInfo.waitSemaphoreCount = 1; |
| presentInfo.pWaitSemaphores = presentSemaphore->ptr(); |
| presentInfo.swapchainCount = 1; |
| presentInfo.pSwapchains = &mSwapchain; |
| presentInfo.pImageIndices = &mCurrentSwapchainImageIndex; |
| presentInfo.pResults = nullptr; |
| |
| VkPresentRegionKHR presentRegion = {}; |
| VkPresentRegionsKHR presentRegions = {}; |
| std::vector<VkRectLayerKHR> vkRects; |
| if (contextVk->getFeatures().supportsIncrementalPresent.enabled && (n_rects > 0)) |
| { |
| EGLint width = getWidth(); |
| EGLint height = getHeight(); |
| |
| EGLint *eglRects = rects; |
| presentRegion.rectangleCount = n_rects; |
| vkRects.resize(n_rects); |
| for (EGLint i = 0; i < n_rects; i++) |
| { |
| VkRectLayerKHR &rect = vkRects[i]; |
| |
| // Make sure the damage rects are within swapchain bounds. |
| rect.offset.x = gl::clamp(*eglRects++, 0, width); |
| rect.offset.y = gl::clamp(*eglRects++, 0, height); |
| rect.extent.width = gl::clamp(*eglRects++, 0, width - rect.offset.x); |
| rect.extent.height = gl::clamp(*eglRects++, 0, height - rect.offset.y); |
| rect.layer = 0; |
| } |
| presentRegion.pRectangles = vkRects.data(); |
| |
| presentRegions.sType = VK_STRUCTURE_TYPE_PRESENT_REGIONS_KHR; |
| presentRegions.pNext = nullptr; |
| presentRegions.swapchainCount = 1; |
| presentRegions.pRegions = &presentRegion; |
| |
| presentInfo.pNext = &presentRegions; |
| } |
| |
| // Update the swap history for this presentation |
| swap.sharedFence = contextVk->getLastSubmittedFence(); |
| ASSERT(!mAcquireImageSemaphore.valid()); |
| |
| ++mCurrentSwapHistoryIndex; |
| mCurrentSwapHistoryIndex = |
| mCurrentSwapHistoryIndex == mSwapHistory.size() ? 0 : mCurrentSwapHistoryIndex; |
| |
| VkResult result = contextVk->getRenderer()->queuePresent(presentInfo); |
| |
| // If OUT_OF_DATE is returned, it's ok, we just need to recreate the swapchain before |
| // continuing. |
| // If VK_SUBOPTIMAL_KHR is returned it's because the device orientation changed and we should |
| // recreate the swapchain with a new window orientation. We aren't quite ready for that so just |
| // ignore for now. |
| // TODO: Check for preRotation: http://anglebug.com/3502 |
| *presentOutOfDate = result == VK_ERROR_OUT_OF_DATE_KHR; |
| if (!*presentOutOfDate && result != VK_SUBOPTIMAL_KHR) |
| { |
| ANGLE_VK_TRY(contextVk, result); |
| } |
| |
| return angle::Result::Continue; |
| } |
| |
| angle::Result WindowSurfaceVk::swapImpl(const gl::Context *context, EGLint *rects, EGLint n_rects) |
| { |
| ANGLE_TRACE_EVENT0("gpu.angle", "WindowSurfaceVk::swapImpl"); |
| |
| ContextVk *contextVk = vk::GetImpl(context); |
| DisplayVk *displayVk = vk::GetImpl(context->getDisplay()); |
| |
| bool presentOutOfDate = false; |
| // Save this now, since present() will increment the value. |
| uint32_t currentSwapHistoryIndex = static_cast<uint32_t>(mCurrentSwapHistoryIndex); |
| |
| ANGLE_TRY(present(contextVk, rects, n_rects, &presentOutOfDate)); |
| |
| ANGLE_TRY(checkForOutOfDateSwapchain(contextVk, currentSwapHistoryIndex, presentOutOfDate)); |
| |
| { |
| // Note: TRACE_EVENT0 is put here instead of inside the function to workaround this issue: |
| // http://anglebug.com/2927 |
| ANGLE_TRACE_EVENT0("gpu.angle", "nextSwapchainImage"); |
| // Get the next available swapchain image. |
| |
| VkResult result = nextSwapchainImage(contextVk); |
| // If SUBOPTIMAL/OUT_OF_DATE is returned, it's ok, we just need to recreate the swapchain |
| // before continuing. |
| if (ANGLE_UNLIKELY((result == VK_ERROR_OUT_OF_DATE_KHR) || (result == VK_SUBOPTIMAL_KHR))) |
| { |
| ANGLE_TRY(checkForOutOfDateSwapchain(contextVk, currentSwapHistoryIndex, true)); |
| // Try one more time and bail if we fail |
| result = nextSwapchainImage(contextVk); |
| } |
| ANGLE_VK_TRY(contextVk, result); |
| } |
| |
| RendererVk *renderer = contextVk->getRenderer(); |
| ANGLE_TRY(renderer->syncPipelineCacheVk(displayVk)); |
| |
| return angle::Result::Continue; |
| } |
| |
| VkResult WindowSurfaceVk::nextSwapchainImage(vk::Context *context) |
| { |
| VkDevice device = context->getDevice(); |
| |
| vk::DeviceScoped<vk::Semaphore> acquireImageSemaphore(device); |
| VkResult result = acquireImageSemaphore.get().init(device); |
| if (ANGLE_UNLIKELY(result != VK_SUCCESS)) |
| { |
| return result; |
| } |
| |
| result = vkAcquireNextImageKHR(device, mSwapchain, UINT64_MAX, |
| acquireImageSemaphore.get().getHandle(), VK_NULL_HANDLE, |
| &mCurrentSwapchainImageIndex); |
| if (ANGLE_UNLIKELY(result != VK_SUCCESS)) |
| { |
| return result; |
| } |
| |
| // The semaphore will be waited on in the next flush. |
| mAcquireImageSemaphore = acquireImageSemaphore.release(); |
| |
| SwapchainImage &image = mSwapchainImages[mCurrentSwapchainImageIndex]; |
| |
| // Update RenderTarget pointers to this swapchain image if not multisampling. Note: a possible |
| // optimization is to defer the |vkAcquireNextImageKHR| call itself to |present()| if |
| // multisampling, as the swapchain image is essentially unused until then. |
| if (!mColorImageMS.valid()) |
| { |
| mColorRenderTarget.updateSwapchainImage(&image.image, &image.imageView); |
| } |
| |
| return VK_SUCCESS; |
| } |
| |
| egl::Error WindowSurfaceVk::postSubBuffer(const gl::Context *context, |
| EGLint x, |
| EGLint y, |
| EGLint width, |
| EGLint height) |
| { |
| // TODO(jmadill) |
| return egl::NoError(); |
| } |
| |
| egl::Error WindowSurfaceVk::querySurfacePointerANGLE(EGLint attribute, void **value) |
| { |
| UNREACHABLE(); |
| return egl::EglBadCurrentSurface(); |
| } |
| |
| egl::Error WindowSurfaceVk::bindTexImage(const gl::Context *context, |
| gl::Texture *texture, |
| EGLint buffer) |
| { |
| return egl::NoError(); |
| } |
| |
| egl::Error WindowSurfaceVk::releaseTexImage(const gl::Context *context, EGLint buffer) |
| { |
| return egl::NoError(); |
| } |
| |
| egl::Error WindowSurfaceVk::getSyncValues(EGLuint64KHR * /*ust*/, |
| EGLuint64KHR * /*msc*/, |
| EGLuint64KHR * /*sbc*/) |
| { |
| UNIMPLEMENTED(); |
| return egl::EglBadAccess(); |
| } |
| |
| void WindowSurfaceVk::setSwapInterval(EGLint interval) |
| { |
| const EGLint minSwapInterval = mState.config->minSwapInterval; |
| const EGLint maxSwapInterval = mState.config->maxSwapInterval; |
| ASSERT(minSwapInterval == 0 || minSwapInterval == 1); |
| ASSERT(maxSwapInterval == 0 || maxSwapInterval == 1); |
| |
| interval = gl::clamp(interval, minSwapInterval, maxSwapInterval); |
| |
| mDesiredSwapchainPresentMode = GetDesiredPresentMode(mPresentModes, interval); |
| |
| // - On mailbox, we need at least three images; one is being displayed to the user until the |
| // next v-sync, and the application alternatingly renders to the other two, one being |
| // recorded, and the other queued for presentation if v-sync happens in the meantime. |
| // - On immediate, we need at least two images; the application alternates between the two |
| // images. |
| // - On fifo, we use at least three images. Triple-buffering allows us to present an image, |
| // have one in the queue, and record in another. Note: on certain configurations (windows + |
| // nvidia + windowed mode), we could get away with a smaller number. |
| // |
| // For simplicity, we always allocate at least three images. |
| mMinImageCount = std::max(3u, mSurfaceCaps.minImageCount); |
| |
| // Make sure we don't exceed maxImageCount. |
| if (mSurfaceCaps.maxImageCount > 0 && mMinImageCount > mSurfaceCaps.maxImageCount) |
| { |
| mMinImageCount = mSurfaceCaps.maxImageCount; |
| } |
| |
| // On the next swap, if the desired present mode is different from the current one, the |
| // swapchain will be recreated. |
| } |
| |
| EGLint WindowSurfaceVk::getWidth() const |
| { |
| return static_cast<EGLint>(mColorRenderTarget.getExtents().width); |
| } |
| |
| EGLint WindowSurfaceVk::getHeight() const |
| { |
| return static_cast<EGLint>(mColorRenderTarget.getExtents().height); |
| } |
| |
| EGLint WindowSurfaceVk::isPostSubBufferSupported() const |
| { |
| // TODO(jmadill) |
| return EGL_FALSE; |
| } |
| |
| EGLint WindowSurfaceVk::getSwapBehavior() const |
| { |
| // TODO(jmadill) |
| return EGL_BUFFER_DESTROYED; |
| } |
| |
| angle::Result WindowSurfaceVk::getCurrentFramebuffer(vk::Context *context, |
| const vk::RenderPass &compatibleRenderPass, |
| vk::Framebuffer **framebufferOut) |
| { |
| vk::Framebuffer ¤tFramebuffer = |
| isMultiSampled() ? mFramebufferMS |
| : mSwapchainImages[mCurrentSwapchainImageIndex].framebuffer; |
| |
| if (currentFramebuffer.valid()) |
| { |
| // Validation layers should detect if the render pass is really compatible. |
| *framebufferOut = ¤tFramebuffer; |
| return angle::Result::Continue; |
| } |
| |
| VkFramebufferCreateInfo framebufferInfo = {}; |
| |
| const gl::Extents extents = mColorRenderTarget.getExtents(); |
| std::array<VkImageView, 2> imageViews = {{VK_NULL_HANDLE, mDepthStencilImageView.getHandle()}}; |
| |
| framebufferInfo.sType = VK_STRUCTURE_TYPE_FRAMEBUFFER_CREATE_INFO; |
| framebufferInfo.flags = 0; |
| framebufferInfo.renderPass = compatibleRenderPass.getHandle(); |
| framebufferInfo.attachmentCount = (mDepthStencilImage.valid() ? 2u : 1u); |
| framebufferInfo.pAttachments = imageViews.data(); |
| framebufferInfo.width = static_cast<uint32_t>(extents.width); |
| framebufferInfo.height = static_cast<uint32_t>(extents.height); |
| framebufferInfo.layers = 1; |
| |
| if (isMultiSampled()) |
| { |
| // If multisampled, there is only a single color image and framebuffer. |
| imageViews[0] = mColorImageViewMS.getHandle(); |
| ANGLE_VK_TRY(context, mFramebufferMS.init(context->getDevice(), framebufferInfo)); |
| } |
| else |
| { |
| for (SwapchainImage &swapchainImage : mSwapchainImages) |
| { |
| imageViews[0] = swapchainImage.imageView.getHandle(); |
| ANGLE_VK_TRY(context, |
| swapchainImage.framebuffer.init(context->getDevice(), framebufferInfo)); |
| } |
| } |
| |
| ASSERT(currentFramebuffer.valid()); |
| *framebufferOut = ¤tFramebuffer; |
| return angle::Result::Continue; |
| } |
| |
| vk::Semaphore WindowSurfaceVk::getAcquireImageSemaphore() |
| { |
| return std::move(mAcquireImageSemaphore); |
| } |
| |
| angle::Result WindowSurfaceVk::initializeContents(const gl::Context *context, |
| const gl::ImageIndex &imageIndex) |
| { |
| ContextVk *contextVk = vk::GetImpl(context); |
| |
| ASSERT(mSwapchainImages.size() > 0); |
| ASSERT(mCurrentSwapchainImageIndex < mSwapchainImages.size()); |
| |
| vk::ImageHelper *image = |
| isMultiSampled() ? &mColorImageMS : &mSwapchainImages[mCurrentSwapchainImageIndex].image; |
| image->stageSubresourceRobustClear(imageIndex, image->getFormat().angleFormat()); |
| ANGLE_TRY(image->flushAllStagedUpdates(contextVk)); |
| |
| if (mDepthStencilImage.valid()) |
| { |
| mDepthStencilImage.stageSubresourceRobustClear( |
| gl::ImageIndex::Make2D(0), mDepthStencilImage.getFormat().angleFormat()); |
| ANGLE_TRY(mDepthStencilImage.flushAllStagedUpdates(contextVk)); |
| } |
| |
| return angle::Result::Continue; |
| } |
| |
| angle::Result WindowSurfaceVk::updateAndDrawOverlay(ContextVk *contextVk, |
| SwapchainImage *image) const |
| { |
| const gl::OverlayType *overlay = contextVk->getOverlay(); |
| OverlayVk *overlayVk = vk::GetImpl(overlay); |
| |
| // If overlay is disabled, nothing to do. |
| if (overlayVk == nullptr) |
| { |
| return angle::Result::Continue; |
| } |
| |
| RendererVk *rendererVk = contextVk->getRenderer(); |
| |
| uint32_t validationMessageCount = 0; |
| std::string lastValidationMessage = |
| rendererVk->getAndClearLastValidationMessage(&validationMessageCount); |
| if (validationMessageCount) |
| { |
| overlay->getTextWidget(gl::WidgetId::VulkanLastValidationMessage) |
| ->set(std::move(lastValidationMessage)); |
| overlay->getCountWidget(gl::WidgetId::VulkanValidationMessageCount) |
| ->add(validationMessageCount); |
| } |
| |
| // Draw overlay |
| ANGLE_TRY(overlayVk->onPresent(contextVk, &image->image, &image->imageView)); |
| |
| overlay->getRunningGraphWidget(gl::WidgetId::VulkanCommandGraphSize)->next(); |
| |
| return angle::Result::Continue; |
| } |
| |
| } // namespace rx |