| /* |
| * Copyright (C) 2018 Apple Inc. All rights reserved. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions |
| * are met: |
| * 1. Redistributions of source code must retain the above copyright |
| * notice, this list of conditions and the following disclaimer. |
| * 2. Redistributions in binary form must reproduce the above copyright |
| * notice, this list of conditions and the following disclaimer in the |
| * documentation and/or other materials provided with the distribution. |
| * |
| * THIS SOFTWARE IS PROVIDED BY APPLE INC. AND ITS CONTRIBUTORS ``AS IS'' |
| * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, |
| * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR |
| * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL APPLE INC. OR ITS CONTRIBUTORS |
| * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR |
| * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF |
| * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS |
| * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN |
| * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) |
| * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF |
| * THE POSSIBILITY OF SUCH DAMAGE. |
| */ |
| |
| #include "config.h" |
| #include "FormattingContext.h" |
| |
| #if ENABLE(LAYOUT_FORMATTING_CONTEXT) |
| |
| #include "FloatingState.h" |
| #include "InlineFormattingState.h" |
| #include "TableFormattingState.h" |
| |
| namespace WebCore { |
| namespace Layout { |
| |
| static inline bool isHeightAuto(const Box& layoutBox) |
| { |
| // 10.5 Content height: the 'height' property |
| // |
| // The percentage is calculated with respect to the height of the generated box's containing block. |
| // If the height of the containing block is not specified explicitly (i.e., it depends on content height), |
| // and this element is not absolutely positioned, the used height is calculated as if 'auto' was specified. |
| |
| auto height = layoutBox.style().logicalHeight(); |
| if (height.isAuto()) |
| return true; |
| |
| if (height.isPercent()) { |
| if (layoutBox.isOutOfFlowPositioned()) |
| return false; |
| |
| return !layoutBox.containingBlock()->style().logicalHeight().isFixed(); |
| } |
| |
| return false; |
| } |
| |
| Optional<LayoutUnit> FormattingContext::Geometry::computedHeightValue(const Box& layoutBox, HeightType heightType, Optional<LayoutUnit> containingBlockHeight) const |
| { |
| auto& style = layoutBox.style(); |
| auto height = heightType == HeightType::Normal ? style.logicalHeight() : heightType == HeightType::Min ? style.logicalMinHeight() : style.logicalMaxHeight(); |
| if (height.isUndefined() || height.isAuto()) |
| return { }; |
| |
| if (height.isFixed()) |
| return LayoutUnit { height.value() }; |
| |
| if (!containingBlockHeight) { |
| // Containing block's height is already computed since we layout the out-of-flow boxes as the last step. |
| ASSERT(!layoutBox.isOutOfFlowPositioned()); |
| if (layoutState().inQuirksMode()) |
| containingBlockHeight = formattingContext().quirks().heightValueOfNearestContainingBlockWithFixedHeight(layoutBox); |
| else { |
| auto containingBlockHeightFromStyle = layoutBox.containingBlock()->style().logicalHeight(); |
| if (containingBlockHeightFromStyle.isFixed()) |
| containingBlockHeight = LayoutUnit { containingBlockHeightFromStyle.value() }; |
| } |
| } |
| |
| if (!containingBlockHeight) |
| return { }; |
| |
| return valueForLength(height, *containingBlockHeight); |
| } |
| |
| Optional<LayoutUnit> FormattingContext::Geometry::computedContentHeight(const Box& layoutBox, Optional<LayoutUnit> containingBlockHeight) const |
| { |
| if (auto height = computedHeightValue(layoutBox, HeightType::Normal, containingBlockHeight)) { |
| if (layoutBox.style().boxSizing() == BoxSizing::ContentBox) |
| return height; |
| auto& boxGeometry = formattingContext().geometryForBox(layoutBox); |
| return *height - (boxGeometry.verticalBorder() + boxGeometry.verticalPadding().valueOr(0)); |
| } |
| return { }; |
| } |
| |
| Optional<LayoutUnit> FormattingContext::Geometry::computedContentWidth(const Box& layoutBox, LayoutUnit containingBlockWidth) const |
| { |
| if (auto width = computedValueIfNotAuto(layoutBox.style().logicalWidth(), containingBlockWidth)) { |
| if (layoutBox.style().boxSizing() == BoxSizing::ContentBox) |
| return width; |
| auto& boxGeometry = formattingContext().geometryForBox(layoutBox); |
| return *width - (boxGeometry.horizontalBorder() + boxGeometry.horizontalPadding().valueOr(0)); |
| } |
| return { }; |
| } |
| |
| LayoutUnit FormattingContext::Geometry::contentHeightForFormattingContextRoot(const Box& layoutBox) const |
| { |
| ASSERT(isHeightAuto(layoutBox) && (layoutBox.establishesFormattingContext() || layoutBox.isDocumentBox())); |
| |
| // 10.6.7 'Auto' heights for block formatting context roots |
| |
| // If it only has inline-level children, the height is the distance between the top of the topmost line box and the bottom of the bottommost line box. |
| // If it has block-level children, the height is the distance between the top margin-edge of the topmost block-level |
| // child box and the bottom margin-edge of the bottommost block-level child box. |
| |
| // In addition, if the element has any floating descendants whose bottom margin edge is below the element's bottom content edge, |
| // then the height is increased to include those edges. Only floats that participate in this block formatting context are taken |
| // into account, e.g., floats inside absolutely positioned descendants or other floats are not. |
| if (!is<Container>(layoutBox) || !downcast<Container>(layoutBox).hasInFlowOrFloatingChild()) |
| return { }; |
| |
| auto& layoutState = this->layoutState(); |
| auto& formattingContext = this->formattingContext(); |
| auto& boxGeometry = formattingContext.geometryForBox(layoutBox); |
| auto borderAndPaddingTop = boxGeometry.borderTop() + boxGeometry.paddingTop().valueOr(0); |
| auto top = borderAndPaddingTop; |
| auto bottom = borderAndPaddingTop; |
| auto& formattingRootContainer = downcast<Container>(layoutBox); |
| if (formattingRootContainer.establishesInlineFormattingContext()) { |
| auto& lineBoxes = downcast<InlineFormattingState>(layoutState.establishedFormattingState(formattingRootContainer)).lineBoxes(); |
| // Even empty containers generate one line. |
| ASSERT(!lineBoxes.isEmpty()); |
| top = lineBoxes.first()->logicalTop(); |
| bottom = lineBoxes.last()->logicalBottom(); |
| } else if (formattingRootContainer.establishesBlockFormattingContext() || formattingRootContainer.establishesTableFormattingContext() || formattingRootContainer.isDocumentBox()) { |
| if (formattingRootContainer.hasInFlowChild()) { |
| auto& firstBoxGeometry = formattingContext.geometryForBox(*formattingRootContainer.firstInFlowChild(), EscapeType::AccessChildFormattingContext); |
| auto& lastBoxGeometry = formattingContext.geometryForBox(*formattingRootContainer.lastInFlowChild(), EscapeType::AccessChildFormattingContext); |
| top = firstBoxGeometry.rectWithMargin().top(); |
| bottom = lastBoxGeometry.rectWithMargin().bottom(); |
| } |
| } else |
| ASSERT_NOT_REACHED(); |
| |
| auto* formattingContextRoot = &formattingRootContainer; |
| // TODO: The document renderer is not a formatting context root by default at all. Need to find out what it is. |
| if (!layoutBox.establishesFormattingContext()) { |
| ASSERT(layoutBox.isDocumentBox()); |
| formattingContextRoot = &layoutBox.formattingContextRoot(); |
| } |
| |
| auto& floatingState = layoutState.establishedFormattingState(*formattingContextRoot).floatingState(); |
| auto floatBottom = floatingState.bottom(*formattingContextRoot); |
| if (floatBottom) { |
| bottom = std::max<LayoutUnit>(*floatBottom, bottom); |
| auto floatTop = floatingState.top(*formattingContextRoot); |
| ASSERT(floatTop); |
| top = std::min<LayoutUnit>(*floatTop, top); |
| } |
| |
| auto computedHeight = bottom - top; |
| LOG_WITH_STREAM(FormattingContextLayout, stream << "[Height] -> content height for formatting context root -> height(" << computedHeight << "px) layoutBox("<< &layoutBox << ")"); |
| return computedHeight; |
| } |
| |
| Optional<LayoutUnit> FormattingContext::Geometry::computedValueIfNotAuto(const Length& geometryProperty, LayoutUnit containingBlockWidth) const |
| { |
| if (geometryProperty.isUndefined()) |
| return WTF::nullopt; |
| |
| if (geometryProperty.isAuto()) |
| return WTF::nullopt; |
| |
| return valueForLength(geometryProperty, containingBlockWidth); |
| } |
| |
| Optional<LayoutUnit> FormattingContext::Geometry::fixedValue(const Length& geometryProperty) const |
| { |
| if (!geometryProperty.isFixed()) |
| return WTF::nullopt; |
| return LayoutUnit(geometryProperty.value()); |
| } |
| |
| // https://www.w3.org/TR/CSS22/visudet.html#min-max-heights |
| // Specifies a percentage for determining the used value. The percentage is calculated with respect to the height of the generated box's containing block. |
| // If the height of the containing block is not specified explicitly (i.e., it depends on content height), and this element is not absolutely positioned, |
| // the percentage value is treated as '0' (for 'min-height') or 'none' (for 'max-height'). |
| Optional<LayoutUnit> FormattingContext::Geometry::computedMaxHeight(const Box& layoutBox, Optional<LayoutUnit> containingBlockHeight) const |
| { |
| return computedHeightValue(layoutBox, HeightType::Max, containingBlockHeight); |
| } |
| |
| Optional<LayoutUnit> FormattingContext::Geometry::computedMinHeight(const Box& layoutBox, Optional<LayoutUnit> containingBlockHeight) const |
| { |
| if (auto minHeightValue = computedHeightValue(layoutBox, HeightType::Min, containingBlockHeight)) |
| return minHeightValue; |
| |
| return { LayoutUnit { } }; |
| } |
| |
| Optional<LayoutUnit> FormattingContext::Geometry::computedMinWidth(const Box& layoutBox, LayoutUnit containingBlockWidth) const |
| { |
| return computedValueIfNotAuto(layoutBox.style().logicalMinWidth(), containingBlockWidth); |
| } |
| |
| Optional<LayoutUnit> FormattingContext::Geometry::computedMaxWidth(const Box& layoutBox, LayoutUnit containingBlockWidth) const |
| { |
| return computedValueIfNotAuto(layoutBox.style().logicalMaxWidth(), containingBlockWidth); |
| } |
| |
| LayoutUnit FormattingContext::Geometry::staticVerticalPositionForOutOfFlowPositioned(const Box& layoutBox, UsedVerticalValues usedVerticalValues) const |
| { |
| ASSERT(layoutBox.isOutOfFlowPositioned()); |
| |
| // For the purposes of this section and the next, the term "static position" (of an element) refers, roughly, to the position an element would have |
| // had in the normal flow. More precisely, the static position for 'top' is the distance from the top edge of the containing block to the top margin |
| // edge of a hypothetical box that would have been the first box of the element if its specified 'position' value had been 'static' and its specified |
| // 'float' had been 'none' and its specified 'clear' had been 'none'. (Note that due to the rules in section 9.7 this might require also assuming a different |
| // computed value for 'display'.) The value is negative if the hypothetical box is above the containing block. |
| |
| // Start with this box's border box offset from the parent's border box. |
| auto& formattingContext = this->formattingContext(); |
| LayoutUnit top; |
| if (auto* previousInFlowSibling = layoutBox.previousInFlowSibling()) { |
| // Add sibling offset |
| auto& previousInFlowBoxGeometry = formattingContext.geometryForBox(*previousInFlowSibling, FormattingContext::EscapeType::AccessChildFormattingContext); |
| top += previousInFlowBoxGeometry.bottom() + previousInFlowBoxGeometry.nonCollapsedMarginAfter(); |
| } else { |
| ASSERT(layoutBox.parent()); |
| top = formattingContext.geometryForBox(*layoutBox.parent(), FormattingContext::EscapeType::AccessChildFormattingContext).contentBoxTop(); |
| } |
| |
| // Resolve top all the way up to the containing block. |
| auto& containingBlock = *layoutBox.containingBlock(); |
| // Start with the parent since we pretend that this box is normal flow. |
| for (auto* container = layoutBox.parent(); container != &containingBlock; container = container->containingBlock()) { |
| auto& boxGeometry = formattingContext.geometryForBox(*container, FormattingContext::EscapeType::AccessChildFormattingContext); |
| // Display::Box::top is the border box top position in its containing block's coordinate system. |
| top += boxGeometry.top(); |
| ASSERT(!container->isPositioned() || layoutBox.isFixedPositioned()); |
| } |
| // Move the static position relative to the padding box. This is very specific to abolutely positioned boxes. |
| return top - usedVerticalValues.constraints.contentBoxTop; |
| } |
| |
| LayoutUnit FormattingContext::Geometry::staticHorizontalPositionForOutOfFlowPositioned(const Box& layoutBox, UsedHorizontalValues usedHorizontalValues) const |
| { |
| ASSERT(layoutBox.isOutOfFlowPositioned()); |
| // See staticVerticalPositionForOutOfFlowPositioned for the definition of the static position. |
| |
| // Start with this box's border box offset from the parent's border box. |
| auto& formattingContext = this->formattingContext(); |
| ASSERT(layoutBox.parent()); |
| auto left = formattingContext.geometryForBox(*layoutBox.parent(), FormattingContext::EscapeType::AccessChildFormattingContext).contentBoxLeft(); |
| |
| // Resolve left all the way up to the containing block. |
| auto& containingBlock = *layoutBox.containingBlock(); |
| // Start with the parent since we pretend that this box is normal flow. |
| for (auto* container = layoutBox.parent(); container != &containingBlock; container = container->containingBlock()) { |
| auto& boxGeometry = formattingContext.geometryForBox(*container, FormattingContext::EscapeType::AccessChildFormattingContext); |
| // Display::Box::left is the border box left position in its containing block's coordinate system. |
| left += boxGeometry.left(); |
| ASSERT(!container->isPositioned() || layoutBox.isFixedPositioned()); |
| } |
| // Move the static position relative to the padding box. This is very specific to abolutely positioned boxes. |
| return left - usedHorizontalValues.constraints.contentBoxLeft; |
| } |
| |
| LayoutUnit FormattingContext::Geometry::shrinkToFitWidth(const Box& formattingRoot, LayoutUnit availableWidth) |
| { |
| LOG_WITH_STREAM(FormattingContextLayout, stream << "[Width] -> shrink to fit -> unsupported -> width(" << LayoutUnit { } << "px) layoutBox: " << &formattingRoot << ")"); |
| ASSERT(formattingRoot.establishesFormattingContext()); |
| |
| // Calculation of the shrink-to-fit width is similar to calculating the width of a table cell using the automatic table layout algorithm. |
| // Roughly: calculate the preferred width by formatting the content without breaking lines other than where explicit line breaks occur, |
| // and also calculate the preferred minimum width, e.g., by trying all possible line breaks. CSS 2.2 does not define the exact algorithm. |
| // Thirdly, find the available width: in this case, this is the width of the containing block minus the used values of 'margin-left', 'border-left-width', |
| // 'padding-left', 'padding-right', 'border-right-width', 'margin-right', and the widths of any relevant scroll bars. |
| |
| // Then the shrink-to-fit width is: min(max(preferred minimum width, available width), preferred width). |
| auto intrinsicWidthConstraints = IntrinsicWidthConstraints { }; |
| if (is<Container>(formattingRoot)) { |
| auto& root = downcast<Container>(formattingRoot); |
| auto& formattingStateForRoot = layoutState().createFormattingStateForFormattingRootIfNeeded(root); |
| auto precomputedIntrinsicWidthConstraints = formattingStateForRoot.intrinsicWidthConstraints(); |
| if (!precomputedIntrinsicWidthConstraints) |
| intrinsicWidthConstraints = LayoutContext::createFormattingContext(root, layoutState())->computedIntrinsicWidthConstraints(); |
| else |
| intrinsicWidthConstraints = *precomputedIntrinsicWidthConstraints; |
| } |
| return std::min(std::max(intrinsicWidthConstraints.minimum, availableWidth), intrinsicWidthConstraints.maximum); |
| } |
| |
| VerticalGeometry FormattingContext::Geometry::outOfFlowNonReplacedVerticalGeometry(const Box& layoutBox, UsedHorizontalValues usedHorizontalValues, UsedVerticalValues usedVerticalValues) const |
| { |
| ASSERT(layoutBox.isOutOfFlowPositioned() && !layoutBox.replaced()); |
| ASSERT(usedVerticalValues.constraints.height); |
| |
| // 10.6.4 Absolutely positioned, non-replaced elements |
| // |
| // For absolutely positioned elements, the used values of the vertical dimensions must satisfy this constraint: |
| // 'top' + 'margin-top' + 'border-top-width' + 'padding-top' + 'height' + 'padding-bottom' + 'border-bottom-width' + 'margin-bottom' + 'bottom' |
| // = height of containing block |
| |
| // If all three of 'top', 'height', and 'bottom' are auto, set 'top' to the static position and apply rule number three below. |
| |
| // If none of the three are 'auto': If both 'margin-top' and 'margin-bottom' are 'auto', solve the equation under the extra |
| // constraint that the two margins get equal values. If one of 'margin-top' or 'margin-bottom' is 'auto', solve the equation for that value. |
| // If the values are over-constrained, ignore the value for 'bottom' and solve for that value. |
| |
| // Otherwise, pick the one of the following six rules that applies. |
| |
| // 1. 'top' and 'height' are 'auto' and 'bottom' is not 'auto', then the height is based on the content per 10.6.7, |
| // set 'auto' values for 'margin-top' and 'margin-bottom' to 0, and solve for 'top' |
| // 2. 'top' and 'bottom' are 'auto' and 'height' is not 'auto', then set 'top' to the static position, set 'auto' values for |
| // 'margin-top' and 'margin-bottom' to 0, and solve for 'bottom' |
| // 3. 'height' and 'bottom' are 'auto' and 'top' is not 'auto', then the height is based on the content per 10.6.7, set 'auto' |
| // values for 'margin-top' and 'margin-bottom' to 0, and solve for 'bottom' |
| // 4. 'top' is 'auto', 'height' and 'bottom' are not 'auto', then set 'auto' values for 'margin-top' and 'margin-bottom' to 0, and solve for 'top' |
| // 5. 'height' is 'auto', 'top' and 'bottom' are not 'auto', then 'auto' values for 'margin-top' and 'margin-bottom' are set to 0 and solve for 'height' |
| // 6. 'bottom' is 'auto', 'top' and 'height' are not 'auto', then set 'auto' values for 'margin-top' and 'margin-bottom' to 0 and solve for 'bottom' |
| |
| auto& formattingContext = this->formattingContext(); |
| auto& style = layoutBox.style(); |
| auto& boxGeometry = formattingContext.geometryForBox(layoutBox); |
| auto containingBlockHeight = *usedVerticalValues.constraints.height; |
| auto containingBlockWidth = usedHorizontalValues.constraints.width; |
| |
| auto top = computedValueIfNotAuto(style.logicalTop(), containingBlockWidth); |
| auto bottom = computedValueIfNotAuto(style.logicalBottom(), containingBlockWidth); |
| auto height = usedVerticalValues.height ? usedVerticalValues.height.value() : computedContentHeight(layoutBox, containingBlockHeight); |
| auto computedVerticalMargin = Geometry::computedVerticalMargin(layoutBox, usedHorizontalValues); |
| UsedVerticalMargin::NonCollapsedValues usedVerticalMargin; |
| auto paddingTop = boxGeometry.paddingTop().valueOr(0); |
| auto paddingBottom = boxGeometry.paddingBottom().valueOr(0); |
| auto borderTop = boxGeometry.borderTop(); |
| auto borderBottom = boxGeometry.borderBottom(); |
| |
| if (!top && !height && !bottom) |
| top = staticVerticalPositionForOutOfFlowPositioned(layoutBox, usedVerticalValues); |
| |
| if (top && height && bottom) { |
| if (!computedVerticalMargin.before && !computedVerticalMargin.after) { |
| auto marginBeforeAndAfter = containingBlockHeight - (*top + borderTop + paddingTop + *height + paddingBottom + borderBottom + *bottom); |
| usedVerticalMargin = { marginBeforeAndAfter / 2, marginBeforeAndAfter / 2 }; |
| } else if (!computedVerticalMargin.before) { |
| usedVerticalMargin.after = *computedVerticalMargin.after; |
| usedVerticalMargin.before = containingBlockHeight - (*top + borderTop + paddingTop + *height + paddingBottom + borderBottom + usedVerticalMargin.after + *bottom); |
| } else if (!computedVerticalMargin.after) { |
| usedVerticalMargin.before = *computedVerticalMargin.before; |
| usedVerticalMargin.after = containingBlockHeight - (*top + usedVerticalMargin.before + borderTop + paddingTop + *height + paddingBottom + borderBottom + *bottom); |
| } else |
| usedVerticalMargin = { *computedVerticalMargin.before, *computedVerticalMargin.after }; |
| // Over-constrained? |
| auto boxHeight = *top + usedVerticalMargin.before + borderTop + paddingTop + *height + paddingBottom + borderBottom + usedVerticalMargin.after + *bottom; |
| if (boxHeight != containingBlockHeight) |
| bottom = containingBlockHeight - (*top + usedVerticalMargin.before + borderTop + paddingTop + *height + paddingBottom + borderBottom + usedVerticalMargin.after); |
| } |
| |
| if (!top && !height && bottom) { |
| // #1 |
| height = contentHeightForFormattingContextRoot(layoutBox); |
| usedVerticalMargin = { computedVerticalMargin.before.valueOr(0), computedVerticalMargin.after.valueOr(0) }; |
| top = containingBlockHeight - (usedVerticalMargin.before + borderTop + paddingTop + *height + paddingBottom + borderBottom + usedVerticalMargin.after + *bottom); |
| } |
| |
| if (!top && !bottom && height) { |
| // #2 |
| top = staticVerticalPositionForOutOfFlowPositioned(layoutBox, usedVerticalValues); |
| usedVerticalMargin = { computedVerticalMargin.before.valueOr(0), computedVerticalMargin.after.valueOr(0) }; |
| bottom = containingBlockHeight - (*top + usedVerticalMargin.before + borderTop + paddingTop + *height + paddingBottom + borderBottom + usedVerticalMargin.after); |
| } |
| |
| if (!height && !bottom && top) { |
| // #3 |
| height = contentHeightForFormattingContextRoot(layoutBox); |
| usedVerticalMargin = { computedVerticalMargin.before.valueOr(0), computedVerticalMargin.after.valueOr(0) }; |
| bottom = containingBlockHeight - (*top + usedVerticalMargin.before + borderTop + paddingTop + *height + paddingBottom + borderBottom + usedVerticalMargin.after); |
| } |
| |
| if (!top && height && bottom) { |
| // #4 |
| usedVerticalMargin = { computedVerticalMargin.before.valueOr(0), computedVerticalMargin.after.valueOr(0) }; |
| top = containingBlockHeight - (usedVerticalMargin.before + borderTop + paddingTop + *height + paddingBottom + borderBottom + usedVerticalMargin.after + *bottom); |
| } |
| |
| if (!height && top && bottom) { |
| // #5 |
| usedVerticalMargin = { computedVerticalMargin.before.valueOr(0), computedVerticalMargin.after.valueOr(0) }; |
| height = containingBlockHeight - (*top + usedVerticalMargin.before + borderTop + paddingTop + paddingBottom + borderBottom + usedVerticalMargin.after + *bottom); |
| } |
| |
| if (!bottom && top && height) { |
| // #6 |
| usedVerticalMargin = { computedVerticalMargin.before.valueOr(0), computedVerticalMargin.after.valueOr(0) }; |
| bottom = containingBlockHeight - (*top + usedVerticalMargin.before + borderTop + paddingTop + *height + paddingBottom + borderBottom + usedVerticalMargin.after); |
| } |
| |
| ASSERT(top); |
| ASSERT(bottom); |
| ASSERT(height); |
| |
| // For out-of-flow elements the containing block is formed by the padding edge of the ancestor. |
| // At this point the positioned value is in the coordinate system of the padding box. Let's convert it to border box coordinate system. |
| auto containingBlockPaddingVerticalEdge = usedVerticalValues.constraints.contentBoxTop; |
| *top += containingBlockPaddingVerticalEdge; |
| *bottom += containingBlockPaddingVerticalEdge; |
| |
| LOG_WITH_STREAM(FormattingContextLayout, stream << "[Position][Height][Margin] -> out-of-flow non-replaced -> top(" << *top << "px) bottom(" << *bottom << "px) height(" << *height << "px) margin(" << usedVerticalMargin.before << "px, " << usedVerticalMargin.after << "px) layoutBox(" << &layoutBox << ")"); |
| return { *top, *bottom, { *height, usedVerticalMargin } }; |
| } |
| |
| HorizontalGeometry FormattingContext::Geometry::outOfFlowNonReplacedHorizontalGeometry(const Box& layoutBox, UsedHorizontalValues usedHorizontalValues) |
| { |
| ASSERT(layoutBox.isOutOfFlowPositioned() && !layoutBox.replaced()); |
| |
| // 10.3.7 Absolutely positioned, non-replaced elements |
| // |
| // 'left' + 'margin-left' + 'border-left-width' + 'padding-left' + 'width' + 'padding-right' + 'border-right-width' + 'margin-right' + 'right' |
| // = width of containing block |
| |
| // If all three of 'left', 'width', and 'right' are 'auto': First set any 'auto' values for 'margin-left' and 'margin-right' to 0. |
| // Then, if the 'direction' property of the element establishing the static-position containing block is 'ltr' set 'left' to the static |
| // position and apply rule number three below; otherwise, set 'right' to the static position and apply rule number one below. |
| // |
| // If none of the three is 'auto': If both 'margin-left' and 'margin-right' are 'auto', solve the equation under the extra constraint that the two margins get equal values, |
| // unless this would make them negative, in which case when direction of the containing block is 'ltr' ('rtl'), set 'margin-left' ('margin-right') to zero and |
| // solve for 'margin-right' ('margin-left'). If one of 'margin-left' or 'margin-right' is 'auto', solve the equation for that value. |
| // If the values are over-constrained, ignore the value for 'left' (in case the 'direction' property of the containing block is 'rtl') or 'right' |
| // (in case 'direction' is 'ltr') and solve for that value. |
| // |
| // Otherwise, set 'auto' values for 'margin-left' and 'margin-right' to 0, and pick the one of the following six rules that applies. |
| // |
| // 1. 'left' and 'width' are 'auto' and 'right' is not 'auto', then the width is shrink-to-fit. Then solve for 'left' |
| // 2. 'left' and 'right' are 'auto' and 'width' is not 'auto', then if the 'direction' property of the element establishing the static-position |
| // containing block is 'ltr' set 'left' to the static position, otherwise set 'right' to the static position. |
| // Then solve for 'left' (if 'direction is 'rtl') or 'right' (if 'direction' is 'ltr'). |
| // 3. 'width' and 'right' are 'auto' and 'left' is not 'auto', then the width is shrink-to-fit . Then solve for 'right' |
| // 4. 'left' is 'auto', 'width' and 'right' are not 'auto', then solve for 'left' |
| // 5. 'width' is 'auto', 'left' and 'right' are not 'auto', then solve for 'width' |
| // 6. 'right' is 'auto', 'left' and 'width' are not 'auto', then solve for 'right' |
| |
| auto& formattingContext = this->formattingContext(); |
| auto& style = layoutBox.style(); |
| auto& boxGeometry = formattingContext.geometryForBox(layoutBox); |
| auto containingBlockWidth = usedHorizontalValues.constraints.width; |
| auto isLeftToRightDirection = layoutBox.containingBlock()->style().isLeftToRightDirection(); |
| |
| auto left = computedValueIfNotAuto(style.logicalLeft(), containingBlockWidth); |
| auto right = computedValueIfNotAuto(style.logicalRight(), containingBlockWidth); |
| auto width = usedHorizontalValues.width ? usedHorizontalValues.width : computedContentWidth(layoutBox, containingBlockWidth); |
| auto computedHorizontalMargin = Geometry::computedHorizontalMargin(layoutBox, usedHorizontalValues); |
| UsedHorizontalMargin usedHorizontalMargin; |
| auto paddingLeft = boxGeometry.paddingLeft().valueOr(0); |
| auto paddingRight = boxGeometry.paddingRight().valueOr(0); |
| auto borderLeft = boxGeometry.borderLeft(); |
| auto borderRight = boxGeometry.borderRight(); |
| if (!left && !width && !right) { |
| // If all three of 'left', 'width', and 'right' are 'auto': First set any 'auto' values for 'margin-left' and 'margin-right' to 0. |
| // Then, if the 'direction' property of the element establishing the static-position containing block is 'ltr' set 'left' to the static |
| // position and apply rule number three below; otherwise, set 'right' to the static position and apply rule number one below. |
| usedHorizontalMargin = { computedHorizontalMargin.start.valueOr(0), computedHorizontalMargin.end.valueOr(0) }; |
| |
| auto staticHorizontalPosition = staticHorizontalPositionForOutOfFlowPositioned(layoutBox, usedHorizontalValues); |
| if (isLeftToRightDirection) |
| left = staticHorizontalPosition; |
| else |
| right = staticHorizontalPosition; |
| } else if (left && width && right) { |
| // If none of the three is 'auto': If both 'margin-left' and 'margin-right' are 'auto', solve the equation under the extra constraint that the two margins get equal values, |
| // unless this would make them negative, in which case when direction of the containing block is 'ltr' ('rtl'), set 'margin-left' ('margin-right') to zero and |
| // solve for 'margin-right' ('margin-left'). If one of 'margin-left' or 'margin-right' is 'auto', solve the equation for that value. |
| // If the values are over-constrained, ignore the value for 'left' (in case the 'direction' property of the containing block is 'rtl') or 'right' |
| // (in case 'direction' is 'ltr') and solve for that value. |
| if (!computedHorizontalMargin.start && !computedHorizontalMargin.end) { |
| auto marginStartAndEnd = containingBlockWidth - (*left + borderLeft + paddingLeft + *width + paddingRight + borderRight + *right); |
| if (marginStartAndEnd >= 0) |
| usedHorizontalMargin = { marginStartAndEnd / 2, marginStartAndEnd / 2 }; |
| else { |
| if (isLeftToRightDirection) { |
| usedHorizontalMargin.start = 0_lu; |
| usedHorizontalMargin.end = containingBlockWidth - (*left + usedHorizontalMargin.start + borderLeft + paddingLeft + *width + paddingRight + borderRight + *right); |
| } else { |
| usedHorizontalMargin.end = 0_lu; |
| usedHorizontalMargin.start = containingBlockWidth - (*left + borderLeft + paddingLeft + *width + paddingRight + borderRight + usedHorizontalMargin.end + *right); |
| } |
| } |
| } else if (!computedHorizontalMargin.start) { |
| usedHorizontalMargin.end = *computedHorizontalMargin.end; |
| usedHorizontalMargin.start = containingBlockWidth - (*left + borderLeft + paddingLeft + *width + paddingRight + borderRight + usedHorizontalMargin.end + *right); |
| } else if (!computedHorizontalMargin.end) { |
| usedHorizontalMargin.start = *computedHorizontalMargin.start; |
| usedHorizontalMargin.end = containingBlockWidth - (*left + usedHorizontalMargin.start + borderLeft + paddingLeft + *width + paddingRight + borderRight + *right); |
| } else { |
| usedHorizontalMargin = { *computedHorizontalMargin.start, *computedHorizontalMargin.end }; |
| // Overconstrained? Ignore right (left). |
| if (isLeftToRightDirection) |
| right = containingBlockWidth - (usedHorizontalMargin.start + *left + borderLeft + paddingLeft + *width + paddingRight + borderRight + usedHorizontalMargin.end); |
| else |
| left = containingBlockWidth - (usedHorizontalMargin.start + borderLeft + paddingLeft + *width + paddingRight + borderRight + usedHorizontalMargin.end + *right); |
| } |
| } else { |
| // Otherwise, set 'auto' values for 'margin-left' and 'margin-right' to 0, and pick the one of the following six rules that applies. |
| usedHorizontalMargin = { computedHorizontalMargin.start.valueOr(0), computedHorizontalMargin.end.valueOr(0) }; |
| } |
| |
| if (!left && !width && right) { |
| // #1 |
| // Calculate the available width by solving for 'width' after setting 'left' (in case 1) to 0 |
| left = LayoutUnit { 0 }; |
| auto availableWidth = containingBlockWidth - (*left + usedHorizontalMargin.start + borderLeft + paddingLeft + paddingRight + borderRight + usedHorizontalMargin.end + *right); |
| width = shrinkToFitWidth(layoutBox, availableWidth); |
| left = containingBlockWidth - (usedHorizontalMargin.start + borderLeft + paddingLeft + *width + paddingRight + borderRight + usedHorizontalMargin.end + *right); |
| } else if (!left && !right && width) { |
| // #2 |
| auto staticHorizontalPosition = staticHorizontalPositionForOutOfFlowPositioned(layoutBox, usedHorizontalValues); |
| if (isLeftToRightDirection) { |
| left = staticHorizontalPosition; |
| right = containingBlockWidth - (*left + usedHorizontalMargin.start + borderLeft + paddingLeft + *width + paddingRight + borderRight + usedHorizontalMargin.end); |
| } else { |
| right = staticHorizontalPosition; |
| left = containingBlockWidth - (usedHorizontalMargin.start + borderLeft + paddingLeft + *width + paddingRight + borderRight + usedHorizontalMargin.end + *right); |
| } |
| } else if (!width && !right && left) { |
| // #3 |
| // Calculate the available width by solving for 'width' after setting 'right' (in case 3) to 0 |
| right = LayoutUnit { 0 }; |
| auto availableWidth = containingBlockWidth - (*left + usedHorizontalMargin.start + borderLeft + paddingLeft + paddingRight + borderRight + usedHorizontalMargin.end + *right); |
| width = shrinkToFitWidth(layoutBox, availableWidth); |
| right = containingBlockWidth - (*left + usedHorizontalMargin.start + borderLeft + paddingLeft + *width + paddingRight + borderRight + usedHorizontalMargin.end); |
| } else if (!left && width && right) { |
| // #4 |
| left = containingBlockWidth - (usedHorizontalMargin.start + borderLeft + paddingLeft + *width + paddingRight + borderRight + usedHorizontalMargin.end + *right); |
| } else if (!width && left && right) { |
| // #5 |
| width = containingBlockWidth - (*left + usedHorizontalMargin.start + borderLeft + paddingLeft + paddingRight + borderRight + usedHorizontalMargin.end + *right); |
| } else if (!right && left && width) { |
| // #6 |
| right = containingBlockWidth - (*left + usedHorizontalMargin.start + borderLeft + paddingLeft + *width + paddingRight + borderRight + usedHorizontalMargin.end); |
| } |
| |
| ASSERT(left); |
| ASSERT(right); |
| ASSERT(width); |
| |
| // For out-of-flow elements the containing block is formed by the padding edge of the ancestor. |
| // At this point the positioned value is in the coordinate system of the padding box. Let's convert it to border box coordinate system. |
| auto containingBlockPaddingVerticalEdge = usedHorizontalValues.constraints.contentBoxLeft; |
| *left += containingBlockPaddingVerticalEdge; |
| *right += containingBlockPaddingVerticalEdge; |
| |
| LOG_WITH_STREAM(FormattingContextLayout, stream << "[Position][Width][Margin] -> out-of-flow non-replaced -> left(" << *left << "px) right(" << *right << "px) width(" << *width << "px) margin(" << usedHorizontalMargin.start << "px, " << usedHorizontalMargin.end << "px) layoutBox(" << &layoutBox << ")"); |
| return { *left, *right, { *width, usedHorizontalMargin, computedHorizontalMargin } }; |
| } |
| |
| VerticalGeometry FormattingContext::Geometry::outOfFlowReplacedVerticalGeometry(const Box& layoutBox, UsedHorizontalValues usedHorizontalValues, UsedVerticalValues usedVerticalValues) const |
| { |
| ASSERT(layoutBox.isOutOfFlowPositioned() && layoutBox.replaced()); |
| ASSERT(usedVerticalValues.constraints.height); |
| |
| // 10.6.5 Absolutely positioned, replaced elements |
| // |
| // The used value of 'height' is determined as for inline replaced elements. |
| // If 'margin-top' or 'margin-bottom' is specified as 'auto' its used value is determined by the rules below. |
| // 1. If both 'top' and 'bottom' have the value 'auto', replace 'top' with the element's static position. |
| // 2. If 'bottom' is 'auto', replace any 'auto' on 'margin-top' or 'margin-bottom' with '0'. |
| // 3. If at this point both 'margin-top' and 'margin-bottom' are still 'auto', solve the equation under the extra constraint that the two margins must get equal values. |
| // 4. If at this point there is only one 'auto' left, solve the equation for that value. |
| // 5. If at this point the values are over-constrained, ignore the value for 'bottom' and solve for that value. |
| |
| auto& formattingContext = this->formattingContext(); |
| auto& style = layoutBox.style(); |
| auto& boxGeometry = formattingContext.geometryForBox(layoutBox); |
| auto containingBlockHeight = *usedVerticalValues.constraints.height; |
| auto containingBlockWidth = usedHorizontalValues.constraints.width; |
| |
| auto top = computedValueIfNotAuto(style.logicalTop(), containingBlockWidth); |
| auto bottom = computedValueIfNotAuto(style.logicalBottom(), containingBlockWidth); |
| auto height = inlineReplacedHeightAndMargin(layoutBox, usedHorizontalValues, usedVerticalValues).contentHeight; |
| auto computedVerticalMargin = Geometry::computedVerticalMargin(layoutBox, usedHorizontalValues); |
| Optional<LayoutUnit> usedMarginBefore = computedVerticalMargin.before; |
| Optional<LayoutUnit> usedMarginAfter = computedVerticalMargin.after; |
| auto paddingTop = boxGeometry.paddingTop().valueOr(0); |
| auto paddingBottom = boxGeometry.paddingBottom().valueOr(0); |
| auto borderTop = boxGeometry.borderTop(); |
| auto borderBottom = boxGeometry.borderBottom(); |
| |
| if (!top && !bottom) { |
| // #1 |
| top = staticVerticalPositionForOutOfFlowPositioned(layoutBox, usedVerticalValues); |
| } |
| |
| if (!bottom) { |
| // #2 |
| usedMarginBefore = computedVerticalMargin.before.valueOr(0); |
| usedMarginAfter = usedMarginBefore; |
| } |
| |
| if (!usedMarginBefore && !usedMarginAfter) { |
| // #3 |
| auto marginBeforeAndAfter = containingBlockHeight - (*top + borderTop + paddingTop + height + paddingBottom + borderBottom + *bottom); |
| usedMarginBefore = marginBeforeAndAfter / 2; |
| usedMarginAfter = usedMarginBefore; |
| } |
| |
| // #4 |
| if (!top) |
| top = containingBlockHeight - (*usedMarginBefore + borderTop + paddingTop + height + paddingBottom + borderBottom + *usedMarginAfter + *bottom); |
| |
| if (!bottom) |
| bottom = containingBlockHeight - (*top + *usedMarginBefore + borderTop + paddingTop + height + paddingBottom + borderBottom + *usedMarginAfter); |
| |
| if (!usedMarginBefore) |
| usedMarginBefore = containingBlockHeight - (*top + borderTop + paddingTop + height + paddingBottom + borderBottom + *usedMarginAfter + *bottom); |
| |
| if (!usedMarginAfter) |
| usedMarginAfter = containingBlockHeight - (*top + *usedMarginBefore + borderTop + paddingTop + height + paddingBottom + borderBottom + *bottom); |
| |
| // #5 |
| auto boxHeight = *top + *usedMarginBefore + borderTop + paddingTop + height + paddingBottom + borderBottom + *usedMarginAfter + *bottom; |
| if (boxHeight > containingBlockHeight) |
| bottom = containingBlockHeight - (*top + *usedMarginBefore + borderTop + paddingTop + height + paddingBottom + borderBottom + *usedMarginAfter); |
| |
| // For out-of-flow elements the containing block is formed by the padding edge of the ancestor. |
| // At this point the positioned value is in the coordinate system of the padding box. Let's convert it to border box coordinate system. |
| auto containingBlockPaddingVerticalEdge = usedVerticalValues.constraints.contentBoxTop; |
| *top += containingBlockPaddingVerticalEdge; |
| *bottom += containingBlockPaddingVerticalEdge; |
| |
| ASSERT(top); |
| ASSERT(bottom); |
| ASSERT(usedMarginBefore); |
| ASSERT(usedMarginAfter); |
| LOG_WITH_STREAM(FormattingContextLayout, stream << "[Position][Height][Margin] -> out-of-flow replaced -> top(" << *top << "px) bottom(" << *bottom << "px) height(" << height << "px) margin(" << *usedMarginBefore << "px, " << *usedMarginAfter << "px) layoutBox(" << &layoutBox << ")"); |
| return { *top, *bottom, { height, { *usedMarginBefore, *usedMarginAfter } } }; |
| } |
| |
| HorizontalGeometry FormattingContext::Geometry::outOfFlowReplacedHorizontalGeometry(const Box& layoutBox, UsedHorizontalValues usedHorizontalValues, UsedVerticalValues usedVerticalValues) const |
| { |
| ASSERT(layoutBox.isOutOfFlowPositioned() && layoutBox.replaced()); |
| |
| // 10.3.8 Absolutely positioned, replaced elements |
| // In this case, section 10.3.7 applies up through and including the constraint equation, but the rest of section 10.3.7 is replaced by the following rules: |
| // |
| // The used value of 'width' is determined as for inline replaced elements. If 'margin-left' or 'margin-right' is specified as 'auto' its used value is determined by the rules below. |
| // 1. If both 'left' and 'right' have the value 'auto', then if the 'direction' property of the element establishing the static-position containing block is 'ltr', |
| // set 'left' to the static position; else if 'direction' is 'rtl', set 'right' to the static position. |
| // 2. If 'left' or 'right' are 'auto', replace any 'auto' on 'margin-left' or 'margin-right' with '0'. |
| // 3. If at this point both 'margin-left' and 'margin-right' are still 'auto', solve the equation under the extra constraint that the two margins must get equal values, |
| // unless this would make them negative, in which case when the direction of the containing block is 'ltr' ('rtl'), set 'margin-left' ('margin-right') to zero and |
| // solve for 'margin-right' ('margin-left'). |
| // 4. If at this point there is an 'auto' left, solve the equation for that value. |
| // 5. If at this point the values are over-constrained, ignore the value for either 'left' (in case the 'direction' property of the containing block is 'rtl') or |
| // 'right' (in case 'direction' is 'ltr') and solve for that value. |
| |
| auto& formattingContext = this->formattingContext(); |
| auto& style = layoutBox.style(); |
| auto& boxGeometry = formattingContext.geometryForBox(layoutBox); |
| auto containingBlockWidth = usedHorizontalValues.constraints.width; |
| auto isLeftToRightDirection = layoutBox.containingBlock()->style().isLeftToRightDirection(); |
| |
| auto left = computedValueIfNotAuto(style.logicalLeft(), containingBlockWidth); |
| auto right = computedValueIfNotAuto(style.logicalRight(), containingBlockWidth); |
| auto computedHorizontalMargin = Geometry::computedHorizontalMargin(layoutBox, usedHorizontalValues); |
| Optional<LayoutUnit> usedMarginStart = computedHorizontalMargin.start; |
| Optional<LayoutUnit> usedMarginEnd = computedHorizontalMargin.end; |
| auto width = inlineReplacedWidthAndMargin(layoutBox, usedHorizontalValues, usedVerticalValues).contentWidth; |
| auto paddingLeft = boxGeometry.paddingLeft().valueOr(0); |
| auto paddingRight = boxGeometry.paddingRight().valueOr(0); |
| auto borderLeft = boxGeometry.borderLeft(); |
| auto borderRight = boxGeometry.borderRight(); |
| |
| if (!left && !right) { |
| // #1 |
| auto staticHorizontalPosition = staticHorizontalPositionForOutOfFlowPositioned(layoutBox, usedHorizontalValues); |
| if (isLeftToRightDirection) |
| left = staticHorizontalPosition; |
| else |
| right = staticHorizontalPosition; |
| } |
| |
| if (!left || !right) { |
| // #2 |
| usedMarginStart = computedHorizontalMargin.start.valueOr(0); |
| usedMarginEnd = computedHorizontalMargin.end.valueOr(0); |
| } |
| |
| if (!usedMarginStart && !usedMarginEnd) { |
| // #3 |
| auto marginStartAndEnd = containingBlockWidth - (*left + borderLeft + paddingLeft + width + paddingRight + borderRight + *right); |
| if (marginStartAndEnd >= 0) { |
| usedMarginStart = marginStartAndEnd / 2; |
| usedMarginEnd = usedMarginStart; |
| } else { |
| if (isLeftToRightDirection) { |
| usedMarginStart = 0_lu; |
| usedMarginEnd = containingBlockWidth - (*left + *usedMarginStart + borderLeft + paddingLeft + width + paddingRight + borderRight + *right); |
| } else { |
| usedMarginEnd = 0_lu; |
| usedMarginStart = containingBlockWidth - (*left + borderLeft + paddingLeft + width + paddingRight + borderRight + *usedMarginEnd + *right); |
| } |
| } |
| } |
| |
| // #4 |
| if (!left) |
| left = containingBlockWidth - (*usedMarginStart + borderLeft + paddingLeft + width + paddingRight + borderRight + *usedMarginEnd + *right); |
| |
| if (!right) |
| right = containingBlockWidth - (*left + *usedMarginStart + borderLeft + paddingLeft + width + paddingRight + borderRight + *usedMarginEnd); |
| |
| if (!usedMarginStart) |
| usedMarginStart = containingBlockWidth - (*left + borderLeft + paddingLeft + width + paddingRight + borderRight + *usedMarginEnd + *right); |
| |
| if (!usedMarginEnd) |
| usedMarginEnd = containingBlockWidth - (*left + *usedMarginStart + borderLeft + paddingLeft + width + paddingRight + borderRight + *right); |
| |
| auto boxWidth = (*left + *usedMarginStart + borderLeft + paddingLeft + width + paddingRight + borderRight + *usedMarginEnd + *right); |
| if (boxWidth > containingBlockWidth) { |
| // #5 Over-constrained? |
| if (isLeftToRightDirection) |
| right = containingBlockWidth - (*left + *usedMarginStart + borderLeft + paddingLeft + width + paddingRight + borderRight + *usedMarginEnd); |
| else |
| left = containingBlockWidth - (*usedMarginStart + borderLeft + paddingLeft + width + paddingRight + borderRight + *usedMarginEnd + *right); |
| } |
| |
| ASSERT(left); |
| ASSERT(right); |
| ASSERT(usedMarginStart); |
| ASSERT(usedMarginEnd); |
| |
| // For out-of-flow elements the containing block is formed by the padding edge of the ancestor. |
| // At this point the positioned value is in the coordinate system of the padding box. Let's convert it to border box coordinate system. |
| auto containingBlockPaddingVerticalEdge = usedHorizontalValues.constraints.contentBoxLeft; |
| *left += containingBlockPaddingVerticalEdge; |
| *right += containingBlockPaddingVerticalEdge; |
| |
| LOG_WITH_STREAM(FormattingContextLayout, stream << "[Position][Width][Margin] -> out-of-flow replaced -> left(" << *left << "px) right(" << *right << "px) width(" << width << "px) margin(" << *usedMarginStart << "px, " << *usedMarginEnd << "px) layoutBox(" << &layoutBox << ")"); |
| return { *left, *right, { width, { *usedMarginStart, *usedMarginEnd }, computedHorizontalMargin } }; |
| } |
| |
| ContentHeightAndMargin FormattingContext::Geometry::complicatedCases(const Box& layoutBox, UsedHorizontalValues usedHorizontalValues, UsedVerticalValues usedVerticalValues) const |
| { |
| ASSERT(!layoutBox.replaced()); |
| // TODO: Use complicated-case for document renderer for now (see BlockFormattingContext::Geometry::inFlowHeightAndMargin). |
| ASSERT((layoutBox.isBlockLevelBox() && layoutBox.isInFlow() && !layoutBox.isOverflowVisible()) || layoutBox.isInlineBlockBox() || layoutBox.isFloatingPositioned() || layoutBox.isDocumentBox() || layoutBox.isTableBox()); |
| |
| // 10.6.6 Complicated cases |
| // |
| // Block-level, non-replaced elements in normal flow when 'overflow' does not compute to 'visible' (except if the 'overflow' property's value has been propagated to the viewport). |
| // 'Inline-block', non-replaced elements. |
| // Floating, non-replaced elements. |
| // |
| // 1. If 'margin-top', or 'margin-bottom' are 'auto', their used value is 0. |
| // 2. If 'height' is 'auto', the height depends on the element's descendants per 10.6.7. |
| |
| auto height = usedVerticalValues.height ? usedVerticalValues.height.value() : computedContentHeight(layoutBox); |
| auto computedVerticalMargin = Geometry::computedVerticalMargin(layoutBox, usedHorizontalValues); |
| // #1 |
| auto usedVerticalMargin = UsedVerticalMargin::NonCollapsedValues { computedVerticalMargin.before.valueOr(0), computedVerticalMargin.after.valueOr(0) }; |
| // #2 |
| if (!height) { |
| ASSERT(isHeightAuto(layoutBox)); |
| height = contentHeightForFormattingContextRoot(layoutBox); |
| } |
| |
| ASSERT(height); |
| |
| LOG_WITH_STREAM(FormattingContextLayout, stream << "[Height][Margin] -> floating non-replaced -> height(" << *height << "px) margin(" << usedVerticalMargin.before << "px, " << usedVerticalMargin.after << "px) -> layoutBox(" << &layoutBox << ")"); |
| return ContentHeightAndMargin { *height, usedVerticalMargin }; |
| } |
| |
| ContentWidthAndMargin FormattingContext::Geometry::floatingNonReplacedWidthAndMargin(const Box& layoutBox, UsedHorizontalValues usedHorizontalValues) |
| { |
| ASSERT(layoutBox.isFloatingPositioned() && !layoutBox.replaced()); |
| |
| // 10.3.5 Floating, non-replaced elements |
| // |
| // 1. If 'margin-left', or 'margin-right' are computed as 'auto', their used value is '0'. |
| // 2. If 'width' is computed as 'auto', the used value is the "shrink-to-fit" width. |
| |
| auto computedHorizontalMargin = Geometry::computedHorizontalMargin(layoutBox, usedHorizontalValues); |
| |
| // #1 |
| auto usedHorizontallMargin = UsedHorizontalMargin { computedHorizontalMargin.start.valueOr(0), computedHorizontalMargin.end.valueOr(0) }; |
| // #2 |
| auto width = usedHorizontalValues.width ? usedHorizontalValues.width : computedContentWidth(layoutBox, usedHorizontalValues.constraints.width); |
| if (!width) |
| width = shrinkToFitWidth(layoutBox, usedHorizontalValues.constraints.width); |
| |
| LOG_WITH_STREAM(FormattingContextLayout, stream << "[Width][Margin] -> floating non-replaced -> width(" << *width << "px) margin(" << usedHorizontallMargin.start << "px, " << usedHorizontallMargin.end << "px) -> layoutBox(" << &layoutBox << ")"); |
| return ContentWidthAndMargin { *width, usedHorizontallMargin, computedHorizontalMargin }; |
| } |
| |
| ContentHeightAndMargin FormattingContext::Geometry::floatingReplacedHeightAndMargin(const Box& layoutBox, UsedHorizontalValues usedHorizontalValues, UsedVerticalValues usedVerticalValues) const |
| { |
| ASSERT(layoutBox.isFloatingPositioned() && layoutBox.replaced()); |
| |
| // 10.6.2 Inline replaced elements, block-level replaced elements in normal flow, 'inline-block' |
| // replaced elements in normal flow and floating replaced elements |
| LOG_WITH_STREAM(FormattingContextLayout, stream << "[Height][Margin] -> floating replaced -> redirected to inline replaced"); |
| return inlineReplacedHeightAndMargin(layoutBox, usedHorizontalValues, usedVerticalValues); |
| } |
| |
| ContentWidthAndMargin FormattingContext::Geometry::floatingReplacedWidthAndMargin(const Box& layoutBox, UsedHorizontalValues usedHorizontalValues) const |
| { |
| ASSERT(layoutBox.isFloatingPositioned() && layoutBox.replaced()); |
| |
| // 10.3.6 Floating, replaced elements |
| // |
| // 1. If 'margin-left' or 'margin-right' are computed as 'auto', their used value is '0'. |
| // 2. The used value of 'width' is determined as for inline replaced elements. |
| auto computedHorizontalMargin = Geometry::computedHorizontalMargin(layoutBox, usedHorizontalValues); |
| |
| LOG_WITH_STREAM(FormattingContextLayout, stream << "[Height][Margin] -> floating replaced -> redirected to inline replaced"); |
| usedHorizontalValues.margin = UsedHorizontalMargin { computedHorizontalMargin.start.valueOr(0), computedHorizontalMargin.end.valueOr(0) }; |
| return inlineReplacedWidthAndMargin(layoutBox, usedHorizontalValues); |
| } |
| |
| VerticalGeometry FormattingContext::Geometry::outOfFlowVerticalGeometry(const Box& layoutBox, UsedHorizontalValues usedHorizontalValues, UsedVerticalValues usedVerticalValues) const |
| { |
| ASSERT(layoutBox.isOutOfFlowPositioned()); |
| |
| if (!layoutBox.replaced()) |
| return outOfFlowNonReplacedVerticalGeometry(layoutBox, usedHorizontalValues, usedVerticalValues); |
| return outOfFlowReplacedVerticalGeometry(layoutBox, usedHorizontalValues, usedVerticalValues); |
| } |
| |
| HorizontalGeometry FormattingContext::Geometry::outOfFlowHorizontalGeometry(const Box& layoutBox, UsedHorizontalValues usedHorizontalValues, UsedVerticalValues usedVerticalValues) |
| { |
| ASSERT(layoutBox.isOutOfFlowPositioned()); |
| |
| if (!layoutBox.replaced()) |
| return outOfFlowNonReplacedHorizontalGeometry(layoutBox, usedHorizontalValues); |
| return outOfFlowReplacedHorizontalGeometry(layoutBox, usedHorizontalValues, usedVerticalValues); |
| } |
| |
| ContentHeightAndMargin FormattingContext::Geometry::floatingHeightAndMargin(const Box& layoutBox, UsedHorizontalValues usedHorizontalValues, UsedVerticalValues usedVerticalValues) const |
| { |
| ASSERT(layoutBox.isFloatingPositioned()); |
| |
| if (!layoutBox.replaced()) |
| return complicatedCases(layoutBox, usedHorizontalValues, usedVerticalValues); |
| return floatingReplacedHeightAndMargin(layoutBox, usedHorizontalValues, usedVerticalValues); |
| } |
| |
| ContentWidthAndMargin FormattingContext::Geometry::floatingWidthAndMargin(const Box& layoutBox, UsedHorizontalValues usedValues) |
| { |
| ASSERT(layoutBox.isFloatingPositioned()); |
| |
| if (!layoutBox.replaced()) |
| return floatingNonReplacedWidthAndMargin(layoutBox, usedValues); |
| return floatingReplacedWidthAndMargin(layoutBox, usedValues); |
| } |
| |
| ContentHeightAndMargin FormattingContext::Geometry::inlineReplacedHeightAndMargin(const Box& layoutBox, UsedHorizontalValues usedHorizontalValues, UsedVerticalValues usedVerticalValues) const |
| { |
| ASSERT((layoutBox.isOutOfFlowPositioned() || layoutBox.isFloatingPositioned() || layoutBox.isInFlow()) && layoutBox.replaced()); |
| |
| // 10.6.2 Inline replaced elements, block-level replaced elements in normal flow, 'inline-block' replaced elements in normal flow and floating replaced elements |
| // |
| // 1. If 'margin-top', or 'margin-bottom' are 'auto', their used value is 0. |
| // 2. If 'height' and 'width' both have computed values of 'auto' and the element also has an intrinsic height, then that intrinsic height is the used value of 'height'. |
| // 3. Otherwise, if 'height' has a computed value of 'auto', and the element has an intrinsic ratio then the used value of 'height' is: |
| // (used width) / (intrinsic ratio) |
| // 4. Otherwise, if 'height' has a computed value of 'auto', and the element has an intrinsic height, then that intrinsic height is the used value of 'height'. |
| // 5. Otherwise, if 'height' has a computed value of 'auto', but none of the conditions above are met, then the used value of 'height' must be set to |
| // the height of the largest rectangle that has a 2:1 ratio, has a height not greater than 150px, and has a width not greater than the device width. |
| |
| // #1 |
| auto& formattingContext = this->formattingContext(); |
| auto computedVerticalMargin = Geometry::computedVerticalMargin(layoutBox, usedHorizontalValues); |
| auto usedVerticalMargin = UsedVerticalMargin::NonCollapsedValues { computedVerticalMargin.before.valueOr(0), computedVerticalMargin.after.valueOr(0) }; |
| auto& style = layoutBox.style(); |
| auto replaced = layoutBox.replaced(); |
| |
| auto height = usedVerticalValues.height ? usedVerticalValues.height.value() : computedContentHeight(layoutBox, usedVerticalValues.constraints.height); |
| auto heightIsAuto = !usedVerticalValues.height && isHeightAuto(layoutBox); |
| auto widthIsAuto = style.logicalWidth().isAuto(); |
| |
| if (heightIsAuto && widthIsAuto && replaced->hasIntrinsicHeight()) { |
| // #2 |
| height = replaced->intrinsicHeight(); |
| } else if (heightIsAuto && replaced->hasIntrinsicRatio()) { |
| // #3 |
| auto usedWidth = formattingContext.geometryForBox(layoutBox).width(); |
| height = usedWidth / replaced->intrinsicRatio(); |
| } else if (heightIsAuto && replaced->hasIntrinsicHeight()) { |
| // #4 |
| height = replaced->intrinsicHeight(); |
| } else if (heightIsAuto) { |
| // #5 |
| height = { 150 }; |
| } |
| |
| ASSERT(height); |
| |
| LOG_WITH_STREAM(FormattingContextLayout, stream << "[Height][Margin] -> inflow replaced -> height(" << *height << "px) margin(" << usedVerticalMargin.before << "px, " << usedVerticalMargin.after << "px) -> layoutBox(" << &layoutBox << ")"); |
| return { *height, usedVerticalMargin }; |
| } |
| |
| ContentWidthAndMargin FormattingContext::Geometry::inlineReplacedWidthAndMargin(const Box& layoutBox, UsedHorizontalValues usedHorizontalValues, Optional<UsedVerticalValues> usedVerticalValues) const |
| { |
| ASSERT((layoutBox.isOutOfFlowPositioned() || layoutBox.isFloatingPositioned() || layoutBox.isInFlow()) && layoutBox.replaced()); |
| |
| // 10.3.2 Inline, replaced elements |
| // |
| // A computed value of 'auto' for 'margin-left' or 'margin-right' becomes a used value of '0'. |
| // |
| // 1. If 'height' and 'width' both have computed values of 'auto' and the element also has an intrinsic width, then that intrinsic width is the used value of 'width'. |
| // |
| // 2. If 'height' and 'width' both have computed values of 'auto' and the element has no intrinsic width, but does have an intrinsic height and intrinsic ratio; |
| // or if 'width' has a computed value of 'auto', 'height' has some other computed value, and the element does have an intrinsic ratio; |
| // then the used value of 'width' is: (used height) * (intrinsic ratio) |
| // |
| // 3. If 'height' and 'width' both have computed values of 'auto' and the element has an intrinsic ratio but no intrinsic height or width, |
| // then the used value of 'width' is undefined in CSS 2.2. However, it is suggested that, if the containing block's width does not itself depend on the replaced |
| // element's width, then the used value of 'width' is calculated from the constraint equation used for block-level, non-replaced elements in normal flow. |
| // |
| // 4. Otherwise, if 'width' has a computed value of 'auto', and the element has an intrinsic width, then that intrinsic width is the used value of 'width'. |
| // |
| // 5. Otherwise, if 'width' has a computed value of 'auto', but none of the conditions above are met, then the used value of 'width' becomes 300px. |
| // If 300px is too wide to fit the device, UAs should use the width of the largest rectangle that has a 2:1 ratio and fits the device instead. |
| |
| auto computedHorizontalMargin = Geometry::computedHorizontalMargin(layoutBox, usedHorizontalValues); |
| |
| auto usedMarginStart = [&] { |
| if (usedHorizontalValues.margin) |
| return usedHorizontalValues.margin->start; |
| return computedHorizontalMargin.start.valueOr(0_lu); |
| }; |
| |
| auto usedMarginEnd = [&] { |
| if (usedHorizontalValues.margin) |
| return usedHorizontalValues.margin->end; |
| return computedHorizontalMargin.end.valueOr(0_lu); |
| }; |
| |
| auto replaced = layoutBox.replaced(); |
| ASSERT(replaced); |
| |
| auto width = usedHorizontalValues.width ? usedHorizontalValues.width : computedContentWidth(layoutBox, usedHorizontalValues.constraints.width); |
| auto heightIsAuto = isHeightAuto(layoutBox); |
| auto height = computedContentHeight(layoutBox, usedVerticalValues ? usedVerticalValues->constraints.height : WTF::nullopt); |
| |
| if (!width && heightIsAuto && replaced->hasIntrinsicWidth()) { |
| // #1 |
| width = replaced->intrinsicWidth(); |
| } else if ((!width && heightIsAuto && !replaced->hasIntrinsicWidth() && replaced->hasIntrinsicHeight() && replaced->hasIntrinsicRatio()) |
| || (!width && height && replaced->hasIntrinsicRatio())) { |
| // #2 |
| width = height.valueOr(replaced->hasIntrinsicHeight()) * replaced->intrinsicRatio(); |
| } else if (!width && heightIsAuto && replaced->hasIntrinsicRatio() && !replaced->hasIntrinsicWidth() && !replaced->hasIntrinsicHeight()) { |
| // #3 |
| // FIXME: undefined but surely doable. |
| ASSERT_NOT_IMPLEMENTED_YET(); |
| } else if (!width && replaced->hasIntrinsicWidth()) { |
| // #4 |
| width = replaced->intrinsicWidth(); |
| } else if (!width) { |
| // #5 |
| width = { 300 }; |
| } |
| |
| ASSERT(width); |
| |
| LOG_WITH_STREAM(FormattingContextLayout, stream << "[Width][Margin] -> inflow replaced -> width(" << *width << "px) margin(" << usedMarginStart() << "px, " << usedMarginEnd() << "px) -> layoutBox(" << &layoutBox << ")"); |
| return { *width, { usedMarginStart(), usedMarginEnd() }, computedHorizontalMargin }; |
| } |
| |
| LayoutSize FormattingContext::Geometry::inFlowPositionedPositionOffset(const Box& layoutBox, UsedHorizontalValues usedHorizontalValues) const |
| { |
| ASSERT(layoutBox.isInFlowPositioned()); |
| |
| // 9.4.3 Relative positioning |
| // |
| // The 'top' and 'bottom' properties move relatively positioned element(s) up or down without changing their size. |
| // Top' moves the boxes down, and 'bottom' moves them up. Since boxes are not split or stretched as a result of 'top' or 'bottom', the used values are always: top = -bottom. |
| // |
| // 1. If both are 'auto', their used values are both '0'. |
| // 2. If one of them is 'auto', it becomes the negative of the other. |
| // 3. If neither is 'auto', 'bottom' is ignored (i.e., the used value of 'bottom' will be minus the value of 'top'). |
| |
| auto& style = layoutBox.style(); |
| auto containingBlockWidth = usedHorizontalValues.constraints.width; |
| |
| auto top = computedValueIfNotAuto(style.logicalTop(), containingBlockWidth); |
| auto bottom = computedValueIfNotAuto(style.logicalBottom(), containingBlockWidth); |
| |
| if (!top && !bottom) { |
| // #1 |
| top = bottom = { 0 }; |
| } else if (!top) { |
| // #2 |
| top = -*bottom; |
| } else if (!bottom) { |
| // #3 |
| bottom = -*top; |
| } else { |
| // #4 |
| bottom = WTF::nullopt; |
| } |
| |
| // For relatively positioned elements, 'left' and 'right' move the box(es) horizontally, without changing their size. |
| // 'Left' moves the boxes to the right, and 'right' moves them to the left. |
| // Since boxes are not split or stretched as a result of 'left' or 'right', the used values are always: left = -right. |
| // |
| // 1. If both 'left' and 'right' are 'auto' (their initial values), the used values are '0' (i.e., the boxes stay in their original position). |
| // 2. If 'left' is 'auto', its used value is minus the value of 'right' (i.e., the boxes move to the left by the value of 'right'). |
| // 3. If 'right' is specified as 'auto', its used value is minus the value of 'left'. |
| // 4. If neither 'left' nor 'right' is 'auto', the position is over-constrained, and one of them has to be ignored. |
| // If the 'direction' property of the containing block is 'ltr', the value of 'left' wins and 'right' becomes -'left'. |
| // If 'direction' of the containing block is 'rtl', 'right' wins and 'left' is ignored. |
| |
| auto left = computedValueIfNotAuto(style.logicalLeft(), containingBlockWidth); |
| auto right = computedValueIfNotAuto(style.logicalRight(), containingBlockWidth); |
| |
| if (!left && !right) { |
| // #1 |
| left = right = { 0 }; |
| } else if (!left) { |
| // #2 |
| left = -*right; |
| } else if (!right) { |
| // #3 |
| right = -*left; |
| } else { |
| // #4 |
| auto isLeftToRightDirection = layoutBox.containingBlock()->style().isLeftToRightDirection(); |
| if (isLeftToRightDirection) |
| right = -*left; |
| else |
| left = WTF::nullopt; |
| } |
| |
| ASSERT(!bottom || *top == -*bottom); |
| ASSERT(!left || *left == -*right); |
| |
| auto topPositionOffset = *top; |
| auto leftPositionOffset = left.valueOr(-*right); |
| |
| LOG_WITH_STREAM(FormattingContextLayout, stream << "[Position] -> positioned inflow -> top offset(" << topPositionOffset << "px) left offset(" << leftPositionOffset << "px) layoutBox(" << &layoutBox << ")"); |
| return { leftPositionOffset, topPositionOffset }; |
| } |
| |
| Edges FormattingContext::Geometry::computedBorder(const Box& layoutBox) const |
| { |
| auto& style = layoutBox.style(); |
| LOG_WITH_STREAM(FormattingContextLayout, stream << "[Border] -> layoutBox: " << &layoutBox); |
| return { |
| { LayoutUnit(style.borderLeft().boxModelWidth()), LayoutUnit(style.borderRight().boxModelWidth()) }, |
| { LayoutUnit(style.borderTop().boxModelWidth()), LayoutUnit(style.borderBottom().boxModelWidth()) } |
| }; |
| } |
| |
| Optional<Edges> FormattingContext::Geometry::computedPadding(const Box& layoutBox, UsedHorizontalValues usedHorizontalValues) const |
| { |
| if (!layoutBox.isPaddingApplicable()) |
| return WTF::nullopt; |
| |
| auto& style = layoutBox.style(); |
| auto containingBlockWidth = usedHorizontalValues.constraints.width; |
| LOG_WITH_STREAM(FormattingContextLayout, stream << "[Padding] -> layoutBox: " << &layoutBox); |
| return Edges { |
| { valueForLength(style.paddingLeft(), containingBlockWidth), valueForLength(style.paddingRight(), containingBlockWidth) }, |
| { valueForLength(style.paddingTop(), containingBlockWidth), valueForLength(style.paddingBottom(), containingBlockWidth) } |
| }; |
| } |
| |
| ComputedHorizontalMargin FormattingContext::Geometry::computedHorizontalMargin(const Box& layoutBox, UsedHorizontalValues usedHorizontalValues) const |
| { |
| auto& style = layoutBox.style(); |
| auto containingBlockWidth = usedHorizontalValues.constraints.width; |
| return { computedValueIfNotAuto(style.marginStart(), containingBlockWidth), computedValueIfNotAuto(style.marginEnd(), containingBlockWidth) }; |
| } |
| |
| ComputedVerticalMargin FormattingContext::Geometry::computedVerticalMargin(const Box& layoutBox, UsedHorizontalValues usedHorizontalValues) const |
| { |
| auto& style = layoutBox.style(); |
| auto containingBlockWidth = usedHorizontalValues.constraints.width; |
| return { computedValueIfNotAuto(style.marginBefore(), containingBlockWidth), computedValueIfNotAuto(style.marginAfter(), containingBlockWidth) }; |
| } |
| |
| FormattingContext::IntrinsicWidthConstraints FormattingContext::Geometry::constrainByMinMaxWidth(const Box& layoutBox, IntrinsicWidthConstraints intrinsicWidth) const |
| { |
| auto& style = layoutBox.style(); |
| auto minWidth = fixedValue(style.logicalMinWidth()); |
| auto maxWidth = fixedValue(style.logicalMaxWidth()); |
| if (!minWidth && !maxWidth) |
| return intrinsicWidth; |
| |
| if (maxWidth) { |
| intrinsicWidth.minimum = std::min(*maxWidth, intrinsicWidth.minimum); |
| intrinsicWidth.maximum = std::min(*maxWidth, intrinsicWidth.maximum); |
| } |
| |
| if (minWidth) { |
| intrinsicWidth.minimum = std::max(*minWidth, intrinsicWidth.minimum); |
| intrinsicWidth.maximum = std::max(*minWidth, intrinsicWidth.maximum); |
| } |
| |
| ASSERT(intrinsicWidth.minimum <= intrinsicWidth.maximum); |
| return intrinsicWidth; |
| } |
| |
| } |
| } |
| #endif |
