blob: 4b8478e1155abc99e371005094b52791bdb57637 [file] [log] [blame]
// Copyright (c) 1999, Google Inc.
// All rights reserved.
//
// Redistribution and use in source and binary forms, with or without
// modification, are permitted provided that the following conditions are
// met:
//
// * Redistributions of source code must retain the above copyright
// notice, this list of conditions and the following disclaimer.
// * Redistributions in binary form must reproduce the above
// copyright notice, this list of conditions and the following disclaimer
// in the documentation and/or other materials provided with the
// distribution.
// * Neither the name of Google Inc. nor the names of its
// contributors may be used to endorse or promote products derived from
// this software without specific prior written permission.
//
// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
// "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
// LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
// A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
// OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
// LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
// DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
// THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
// (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
// OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
#define _GNU_SOURCE 1 // needed for O_NOFOLLOW and pread()/pwrite()
#include "utilities.h"
#include <algorithm>
#include <assert.h>
#include <iomanip>
#include <string>
#ifdef HAVE_UNISTD_H
# include <unistd.h> // For _exit.
#endif
#include <climits>
#include <sys/types.h>
#include <sys/stat.h>
#ifdef HAVE_SYS_UTSNAME_H
# include <sys/utsname.h> // For uname.
#endif
#include <fcntl.h>
#include <cstdio>
#include <iostream>
#include <stdarg.h>
#include <stdlib.h>
#ifdef HAVE_PWD_H
# include <pwd.h>
#endif
#ifdef HAVE_SYSLOG_H
# include <syslog.h>
#endif
#include <vector>
#include <errno.h> // for errno
#include <sstream>
#include "base/commandlineflags.h" // to get the program name
#include "glog/logging.h"
#include "glog/raw_logging.h"
#include "base/googleinit.h"
using std::string;
using std::vector;
using std::setw;
using std::setfill;
using std::hex;
using std::dec;
using std::min;
using std::ostream;
using std::ostringstream;
using std::FILE;
using std::fwrite;
using std::fclose;
using std::fflush;
using std::fprintf;
using std::perror;
#ifdef __QNX__
using std::fdopen;
#endif
#ifdef _WIN32
#define fdopen _fdopen
#endif
// There is no thread annotation support.
#define EXCLUSIVE_LOCKS_REQUIRED(mu)
static bool BoolFromEnv(const char *varname, bool defval) {
const char* const valstr = getenv(varname);
if (!valstr) {
return defval;
}
return memchr("tTyY1\0", valstr[0], 6) != NULL;
}
GLOG_DEFINE_bool(logtostderr, BoolFromEnv("GOOGLE_LOGTOSTDERR", false),
"log messages go to stderr instead of logfiles");
GLOG_DEFINE_bool(alsologtostderr, BoolFromEnv("GOOGLE_ALSOLOGTOSTDERR", false),
"log messages go to stderr in addition to logfiles");
GLOG_DEFINE_bool(colorlogtostderr, false,
"color messages logged to stderr (if supported by terminal)");
#ifdef OS_LINUX
GLOG_DEFINE_bool(drop_log_memory, true, "Drop in-memory buffers of log contents. "
"Logs can grow very quickly and they are rarely read before they "
"need to be evicted from memory. Instead, drop them from memory "
"as soon as they are flushed to disk.");
#endif
// By default, errors (including fatal errors) get logged to stderr as
// well as the file.
//
// The default is ERROR instead of FATAL so that users can see problems
// when they run a program without having to look in another file.
DEFINE_int32(stderrthreshold,
GOOGLE_NAMESPACE::GLOG_ERROR,
"log messages at or above this level are copied to stderr in "
"addition to logfiles. This flag obsoletes --alsologtostderr.");
GLOG_DEFINE_bool(log_prefix, true,
"Prepend the log prefix to the start of each log line");
GLOG_DEFINE_int32(minloglevel, 0, "Messages logged at a lower level than this don't "
"actually get logged anywhere");
GLOG_DEFINE_int32(logbuflevel, 0,
"Buffer log messages logged at this level or lower"
" (-1 means don't buffer; 0 means buffer INFO only;"
" ...)");
GLOG_DEFINE_int32(logbufsecs, 30,
"Buffer log messages for at most this many seconds");
// Compute the default value for --log_dir
static const char* DefaultLogDir() {
const char* env;
env = getenv("GOOGLE_LOG_DIR");
if (env != NULL && env[0] != '\0') {
return env;
}
env = getenv("TEST_TMPDIR");
if (env != NULL && env[0] != '\0') {
return env;
}
return "";
}
GLOG_DEFINE_int32(logfile_mode, 0664, "Log file mode/permissions.");
GLOG_DEFINE_string(log_dir, DefaultLogDir(),
"If specified, logfiles are written into this directory instead "
"of the default logging directory.");
GLOG_DEFINE_string(log_link, "", "Put additional links to the log "
"files in this directory");
GLOG_DEFINE_int32(max_log_size, 1800,
"approx. maximum log file size (in MB). A value of 0 will "
"be silently overridden to 1.");
GLOG_DEFINE_bool(stop_logging_if_full_disk, false,
"Stop attempting to log to disk if the disk is full.");
GLOG_DEFINE_string(log_backtrace_at, "",
"Emit a backtrace when logging at file:linenum.");
// TODO(hamaji): consider windows
#define PATH_SEPARATOR '/'
#ifndef HAVE_PREAD
#if defined(OS_WINDOWS)
#include <BaseTsd.h>
#define ssize_t SSIZE_T
#endif
static ssize_t pread(int fd, void* buf, size_t count, off_t offset) {
off_t orig_offset = lseek(fd, 0, SEEK_CUR);
if (orig_offset == (off_t)-1)
return -1;
if (lseek(fd, offset, SEEK_CUR) == (off_t)-1)
return -1;
ssize_t len = read(fd, buf, count);
if (len < 0)
return len;
if (lseek(fd, orig_offset, SEEK_SET) == (off_t)-1)
return -1;
return len;
}
#endif // !HAVE_PREAD
#ifndef HAVE_PWRITE
static ssize_t pwrite(int fd, void* buf, size_t count, off_t offset) {
off_t orig_offset = lseek(fd, 0, SEEK_CUR);
if (orig_offset == (off_t)-1)
return -1;
if (lseek(fd, offset, SEEK_CUR) == (off_t)-1)
return -1;
ssize_t len = write(fd, buf, count);
if (len < 0)
return len;
if (lseek(fd, orig_offset, SEEK_SET) == (off_t)-1)
return -1;
return len;
}
#endif // !HAVE_PWRITE
static void GetHostName(string* hostname) {
#if defined(HAVE_SYS_UTSNAME_H)
struct utsname buf;
if (0 != uname(&buf)) {
// ensure null termination on failure
*buf.nodename = '\0';
}
*hostname = buf.nodename;
#elif defined(OS_WINDOWS)
char buf[MAX_COMPUTERNAME_LENGTH + 1];
DWORD len = MAX_COMPUTERNAME_LENGTH + 1;
if (GetComputerNameA(buf, &len)) {
*hostname = buf;
} else {
hostname->clear();
}
#else
# warning There is no way to retrieve the host name.
*hostname = "(unknown)";
#endif
}
// Returns true iff terminal supports using colors in output.
static bool TerminalSupportsColor() {
bool term_supports_color = false;
#ifdef OS_WINDOWS
// on Windows TERM variable is usually not set, but the console does
// support colors.
term_supports_color = true;
#else
// On non-Windows platforms, we rely on the TERM variable.
const char* const term = getenv("TERM");
if (term != NULL && term[0] != '\0') {
term_supports_color =
!strcmp(term, "xterm") ||
!strcmp(term, "xterm-color") ||
!strcmp(term, "xterm-256color") ||
!strcmp(term, "screen-256color") ||
!strcmp(term, "screen") ||
!strcmp(term, "linux") ||
!strcmp(term, "cygwin");
}
#endif
return term_supports_color;
}
_START_GOOGLE_NAMESPACE_
enum GLogColor {
COLOR_DEFAULT,
COLOR_RED,
COLOR_GREEN,
COLOR_YELLOW
};
static GLogColor SeverityToColor(LogSeverity severity) {
assert(severity >= 0 && severity < NUM_SEVERITIES);
GLogColor color = COLOR_DEFAULT;
switch (severity) {
case GLOG_INFO:
color = COLOR_DEFAULT;
break;
case GLOG_WARNING:
color = COLOR_YELLOW;
break;
case GLOG_ERROR:
case GLOG_FATAL:
color = COLOR_RED;
break;
default:
// should never get here.
assert(false);
}
return color;
}
#ifdef OS_WINDOWS
// Returns the character attribute for the given color.
WORD GetColorAttribute(GLogColor color) {
switch (color) {
case COLOR_RED: return FOREGROUND_RED;
case COLOR_GREEN: return FOREGROUND_GREEN;
case COLOR_YELLOW: return FOREGROUND_RED | FOREGROUND_GREEN;
default: return 0;
}
}
#else
// Returns the ANSI color code for the given color.
const char* GetAnsiColorCode(GLogColor color) {
switch (color) {
case COLOR_RED: return "1";
case COLOR_GREEN: return "2";
case COLOR_YELLOW: return "3";
case COLOR_DEFAULT: return "";
};
return NULL; // stop warning about return type.
}
#endif // OS_WINDOWS
// Safely get max_log_size, overriding to 1 if it somehow gets defined as 0
static int32 MaxLogSize() {
return (FLAGS_max_log_size > 0 ? FLAGS_max_log_size : 1);
}
// An arbitrary limit on the length of a single log message. This
// is so that streaming can be done more efficiently.
const size_t LogMessage::kMaxLogMessageLen = 30000;
struct LogMessage::LogMessageData {
LogMessageData();
void reset();
int preserved_errno_; // preserved errno
// Buffer space; contains complete message text.
char message_text_[LogMessage::kMaxLogMessageLen+1];
LogStream stream_;
char severity_; // What level is this LogMessage logged at?
int line_; // line number where logging call is.
void (LogMessage::*send_method_)(); // Call this in destructor to send
union { // At most one of these is used: union to keep the size low.
LogSink* sink_; // NULL or sink to send message to
std::vector<std::string>* outvec_; // NULL or vector to push message onto
std::string* message_; // NULL or string to write message into
};
time_t timestamp_; // Time of creation of LogMessage
struct ::tm tm_time_; // Time of creation of LogMessage
size_t num_prefix_chars_; // # of chars of prefix in this message
size_t num_chars_to_log_; // # of chars of msg to send to log
size_t num_chars_to_syslog_; // # of chars of msg to send to syslog
const char* basename_; // basename of file that called LOG
const char* fullname_; // fullname of file that called LOG
bool has_been_flushed_; // false => data has not been flushed
bool first_fatal_; // true => this was first fatal msg
private:
LogMessageData(const LogMessageData&);
void operator=(const LogMessageData&);
};
// A mutex that allows only one thread to log at a time, to keep things from
// getting jumbled. Some other very uncommon logging operations (like
// changing the destination file for log messages of a given severity) also
// lock this mutex. Please be sure that anybody who might possibly need to
// lock it does so.
static Mutex log_mutex;
// Number of messages sent at each severity. Under log_mutex.
int64 LogMessage::num_messages_[NUM_SEVERITIES] = {0, 0, 0, 0};
// Globally disable log writing (if disk is full)
static bool stop_writing = false;
const char*const LogSeverityNames[NUM_SEVERITIES] = {
"INFO", "WARNING", "ERROR", "FATAL"
};
// Has the user called SetExitOnDFatal(true)?
static bool exit_on_dfatal = true;
const char* GetLogSeverityName(LogSeverity severity) {
return LogSeverityNames[severity];
}
base::Logger::~Logger() {
}
namespace {
// Encapsulates all file-system related state
class LogFileObject : public base::Logger {
public:
LogFileObject(LogSeverity severity, const char* base_filename);
~LogFileObject();
virtual void Write(bool force_flush, // Should we force a flush here?
time_t timestamp, // Timestamp for this entry
const char* message,
int message_len);
// Configuration options
void SetBasename(const char* basename);
void SetExtension(const char* ext);
void SetSymlinkBasename(const char* symlink_basename);
// Normal flushing routine
virtual void Flush();
// It is the actual file length for the system loggers,
// i.e., INFO, ERROR, etc.
virtual uint32 LogSize() {
MutexLock l(&lock_);
return file_length_;
}
// Internal flush routine. Exposed so that FlushLogFilesUnsafe()
// can avoid grabbing a lock. Usually Flush() calls it after
// acquiring lock_.
void FlushUnlocked();
private:
static const uint32 kRolloverAttemptFrequency = 0x20;
Mutex lock_;
bool base_filename_selected_;
string base_filename_;
string symlink_basename_;
string filename_extension_; // option users can specify (eg to add port#)
FILE* file_;
LogSeverity severity_;
uint32 bytes_since_flush_;
uint32 dropped_mem_length_;
uint32 file_length_;
unsigned int rollover_attempt_;
int64 next_flush_time_; // cycle count at which to flush log
// Actually create a logfile using the value of base_filename_ and the
// supplied argument time_pid_string
// REQUIRES: lock_ is held
bool CreateLogfile(const string& time_pid_string);
};
} // namespace
class LogDestination {
public:
friend class LogMessage;
friend void ReprintFatalMessage();
friend base::Logger* base::GetLogger(LogSeverity);
friend void base::SetLogger(LogSeverity, base::Logger*);
// These methods are just forwarded to by their global versions.
static void SetLogDestination(LogSeverity severity,
const char* base_filename);
static void SetLogSymlink(LogSeverity severity,
const char* symlink_basename);
static void AddLogSink(LogSink *destination);
static void RemoveLogSink(LogSink *destination);
static void SetLogFilenameExtension(const char* filename_extension);
static void SetStderrLogging(LogSeverity min_severity);
static void LogToStderr();
// Flush all log files that are at least at the given severity level
static void FlushLogFiles(int min_severity);
static void FlushLogFilesUnsafe(int min_severity);
// we set the maximum size of our packet to be 1400, the logic being
// to prevent fragmentation.
// Really this number is arbitrary.
static const int kNetworkBytes = 1400;
static const string& hostname();
static const bool& terminal_supports_color() {
return terminal_supports_color_;
}
static void DeleteLogDestinations();
private:
LogDestination(LogSeverity severity, const char* base_filename);
~LogDestination() { }
// Take a log message of a particular severity and log it to stderr
// iff it's of a high enough severity to deserve it.
static void MaybeLogToStderr(LogSeverity severity, const char* message,
size_t len);
// Take a log message of a particular severity and log it to a file
// iff the base filename is not "" (which means "don't log to me")
static void MaybeLogToLogfile(LogSeverity severity,
time_t timestamp,
const char* message, size_t len);
// Take a log message of a particular severity and log it to the file
// for that severity and also for all files with severity less than
// this severity.
static void LogToAllLogfiles(LogSeverity severity,
time_t timestamp,
const char* message, size_t len);
// Send logging info to all registered sinks.
static void LogToSinks(LogSeverity severity,
const char *full_filename,
const char *base_filename,
int line,
const struct ::tm* tm_time,
const char* message,
size_t message_len);
// Wait for all registered sinks via WaitTillSent
// including the optional one in "data".
static void WaitForSinks(LogMessage::LogMessageData* data);
static LogDestination* log_destination(LogSeverity severity);
LogFileObject fileobject_;
base::Logger* logger_; // Either &fileobject_, or wrapper around it
static LogDestination* log_destinations_[NUM_SEVERITIES];
static string addresses_;
static string hostname_;
static bool terminal_supports_color_;
// arbitrary global logging destinations.
static vector<LogSink*>* sinks_;
// Protects the vector sinks_,
// but not the LogSink objects its elements reference.
static Mutex sink_mutex_;
// Disallow
LogDestination(const LogDestination&);
LogDestination& operator=(const LogDestination&);
};
string LogDestination::addresses_;
string LogDestination::hostname_;
vector<LogSink*>* LogDestination::sinks_ = NULL;
Mutex LogDestination::sink_mutex_;
bool LogDestination::terminal_supports_color_ = TerminalSupportsColor();
/* static */
const string& LogDestination::hostname() {
if (hostname_.empty()) {
GetHostName(&hostname_);
if (hostname_.empty()) {
hostname_ = "(unknown)";
}
}
return hostname_;
}
LogDestination::LogDestination(LogSeverity severity,
const char* base_filename)
: fileobject_(severity, base_filename),
logger_(&fileobject_) {
}
inline void LogDestination::FlushLogFilesUnsafe(int min_severity) {
// assume we have the log_mutex or we simply don't care
// about it
for (int i = min_severity; i < NUM_SEVERITIES; i++) {
LogDestination* log = log_destinations_[i];
if (log != NULL) {
// Flush the base fileobject_ logger directly instead of going
// through any wrappers to reduce chance of deadlock.
log->fileobject_.FlushUnlocked();
}
}
}
inline void LogDestination::FlushLogFiles(int min_severity) {
// Prevent any subtle race conditions by wrapping a mutex lock around
// all this stuff.
MutexLock l(&log_mutex);
for (int i = min_severity; i < NUM_SEVERITIES; i++) {
LogDestination* log = log_destination(i);
if (log != NULL) {
log->logger_->Flush();
}
}
}
inline void LogDestination::SetLogDestination(LogSeverity severity,
const char* base_filename) {
assert(severity >= 0 && severity < NUM_SEVERITIES);
// Prevent any subtle race conditions by wrapping a mutex lock around
// all this stuff.
MutexLock l(&log_mutex);
log_destination(severity)->fileobject_.SetBasename(base_filename);
}
inline void LogDestination::SetLogSymlink(LogSeverity severity,
const char* symlink_basename) {
CHECK_GE(severity, 0);
CHECK_LT(severity, NUM_SEVERITIES);
MutexLock l(&log_mutex);
log_destination(severity)->fileobject_.SetSymlinkBasename(symlink_basename);
}
inline void LogDestination::AddLogSink(LogSink *destination) {
// Prevent any subtle race conditions by wrapping a mutex lock around
// all this stuff.
MutexLock l(&sink_mutex_);
if (!sinks_) sinks_ = new vector<LogSink*>;
sinks_->push_back(destination);
}
inline void LogDestination::RemoveLogSink(LogSink *destination) {
// Prevent any subtle race conditions by wrapping a mutex lock around
// all this stuff.
MutexLock l(&sink_mutex_);
// This doesn't keep the sinks in order, but who cares?
if (sinks_) {
for (int i = sinks_->size() - 1; i >= 0; i--) {
if ((*sinks_)[i] == destination) {
(*sinks_)[i] = (*sinks_)[sinks_->size() - 1];
sinks_->pop_back();
break;
}
}
}
}
inline void LogDestination::SetLogFilenameExtension(const char* ext) {
// Prevent any subtle race conditions by wrapping a mutex lock around
// all this stuff.
MutexLock l(&log_mutex);
for ( int severity = 0; severity < NUM_SEVERITIES; ++severity ) {
log_destination(severity)->fileobject_.SetExtension(ext);
}
}
inline void LogDestination::SetStderrLogging(LogSeverity min_severity) {
assert(min_severity >= 0 && min_severity < NUM_SEVERITIES);
// Prevent any subtle race conditions by wrapping a mutex lock around
// all this stuff.
MutexLock l(&log_mutex);
FLAGS_stderrthreshold = min_severity;
}
inline void LogDestination::LogToStderr() {
// *Don't* put this stuff in a mutex lock, since SetStderrLogging &
// SetLogDestination already do the locking!
SetStderrLogging(0); // thus everything is "also" logged to stderr
for ( int i = 0; i < NUM_SEVERITIES; ++i ) {
SetLogDestination(i, ""); // "" turns off logging to a logfile
}
}
static void ColoredWriteToStderr(LogSeverity severity,
const char* message, size_t len) {
const GLogColor color =
(LogDestination::terminal_supports_color() && FLAGS_colorlogtostderr) ?
SeverityToColor(severity) : COLOR_DEFAULT;
// Avoid using cerr from this module since we may get called during
// exit code, and cerr may be partially or fully destroyed by then.
if (COLOR_DEFAULT == color) {
fwrite(message, len, 1, stderr);
return;
}
#ifdef OS_WINDOWS
const HANDLE stderr_handle = GetStdHandle(STD_ERROR_HANDLE);
// Gets the current text color.
CONSOLE_SCREEN_BUFFER_INFO buffer_info;
GetConsoleScreenBufferInfo(stderr_handle, &buffer_info);
const WORD old_color_attrs = buffer_info.wAttributes;
// We need to flush the stream buffers into the console before each
// SetConsoleTextAttribute call lest it affect the text that is already
// printed but has not yet reached the console.
fflush(stderr);
SetConsoleTextAttribute(stderr_handle,
GetColorAttribute(color) | FOREGROUND_INTENSITY);
fwrite(message, len, 1, stderr);
fflush(stderr);
// Restores the text color.
SetConsoleTextAttribute(stderr_handle, old_color_attrs);
#else
fprintf(stderr, "\033[0;3%sm", GetAnsiColorCode(color));
fwrite(message, len, 1, stderr);
fprintf(stderr, "\033[m"); // Resets the terminal to default.
#endif // OS_WINDOWS
}
static void WriteToStderr(const char* message, size_t len) {
// Avoid using cerr from this module since we may get called during
// exit code, and cerr may be partially or fully destroyed by then.
fwrite(message, len, 1, stderr);
}
inline void LogDestination::MaybeLogToStderr(LogSeverity severity,
const char* message, size_t len) {
if ((severity >= FLAGS_stderrthreshold) || FLAGS_alsologtostderr) {
ColoredWriteToStderr(severity, message, len);
#ifdef OS_WINDOWS
// On Windows, also output to the debugger
::OutputDebugStringA(string(message,len).c_str());
#endif
}
}
inline void LogDestination::MaybeLogToLogfile(LogSeverity severity,
time_t timestamp,
const char* message,
size_t len) {
const bool should_flush = severity > FLAGS_logbuflevel;
LogDestination* destination = log_destination(severity);
destination->logger_->Write(should_flush, timestamp, message, len);
}
inline void LogDestination::LogToAllLogfiles(LogSeverity severity,
time_t timestamp,
const char* message,
size_t len) {
if ( FLAGS_logtostderr ) { // global flag: never log to file
ColoredWriteToStderr(severity, message, len);
} else {
for (int i = severity; i >= 0; --i)
LogDestination::MaybeLogToLogfile(i, timestamp, message, len);
}
}
inline void LogDestination::LogToSinks(LogSeverity severity,
const char *full_filename,
const char *base_filename,
int line,
const struct ::tm* tm_time,
const char* message,
size_t message_len) {
ReaderMutexLock l(&sink_mutex_);
if (sinks_) {
for (int i = sinks_->size() - 1; i >= 0; i--) {
(*sinks_)[i]->send(severity, full_filename, base_filename,
line, tm_time, message, message_len);
}
}
}
inline void LogDestination::WaitForSinks(LogMessage::LogMessageData* data) {
ReaderMutexLock l(&sink_mutex_);
if (sinks_) {
for (int i = sinks_->size() - 1; i >= 0; i--) {
(*sinks_)[i]->WaitTillSent();
}
}
const bool send_to_sink =
(data->send_method_ == &LogMessage::SendToSink) ||
(data->send_method_ == &LogMessage::SendToSinkAndLog);
if (send_to_sink && data->sink_ != NULL) {
data->sink_->WaitTillSent();
}
}
LogDestination* LogDestination::log_destinations_[NUM_SEVERITIES];
inline LogDestination* LogDestination::log_destination(LogSeverity severity) {
assert(severity >=0 && severity < NUM_SEVERITIES);
if (!log_destinations_[severity]) {
log_destinations_[severity] = new LogDestination(severity, NULL);
}
return log_destinations_[severity];
}
void LogDestination::DeleteLogDestinations() {
for (int severity = 0; severity < NUM_SEVERITIES; ++severity) {
delete log_destinations_[severity];
log_destinations_[severity] = NULL;
}
MutexLock l(&sink_mutex_);
delete sinks_;
sinks_ = NULL;
}
namespace {
LogFileObject::LogFileObject(LogSeverity severity,
const char* base_filename)
: base_filename_selected_(base_filename != NULL),
base_filename_((base_filename != NULL) ? base_filename : ""),
symlink_basename_(glog_internal_namespace_::ProgramInvocationShortName()),
filename_extension_(),
file_(NULL),
severity_(severity),
bytes_since_flush_(0),
dropped_mem_length_(0),
file_length_(0),
rollover_attempt_(kRolloverAttemptFrequency-1),
next_flush_time_(0) {
assert(severity >= 0);
assert(severity < NUM_SEVERITIES);
}
LogFileObject::~LogFileObject() {
MutexLock l(&lock_);
if (file_ != NULL) {
fclose(file_);
file_ = NULL;
}
}
void LogFileObject::SetBasename(const char* basename) {
MutexLock l(&lock_);
base_filename_selected_ = true;
if (base_filename_ != basename) {
// Get rid of old log file since we are changing names
if (file_ != NULL) {
fclose(file_);
file_ = NULL;
rollover_attempt_ = kRolloverAttemptFrequency-1;
}
base_filename_ = basename;
}
}
void LogFileObject::SetExtension(const char* ext) {
MutexLock l(&lock_);
if (filename_extension_ != ext) {
// Get rid of old log file since we are changing names
if (file_ != NULL) {
fclose(file_);
file_ = NULL;
rollover_attempt_ = kRolloverAttemptFrequency-1;
}
filename_extension_ = ext;
}
}
void LogFileObject::SetSymlinkBasename(const char* symlink_basename) {
MutexLock l(&lock_);
symlink_basename_ = symlink_basename;
}
void LogFileObject::Flush() {
MutexLock l(&lock_);
FlushUnlocked();
}
void LogFileObject::FlushUnlocked(){
if (file_ != NULL) {
fflush(file_);
bytes_since_flush_ = 0;
}
// Figure out when we are due for another flush.
const int64 next = (FLAGS_logbufsecs
* static_cast<int64>(1000000)); // in usec
next_flush_time_ = CycleClock_Now() + UsecToCycles(next);
}
bool LogFileObject::CreateLogfile(const string& time_pid_string) {
string string_filename = base_filename_+filename_extension_+
time_pid_string;
const char* filename = string_filename.c_str();
int fd = open(filename, O_WRONLY | O_CREAT | O_EXCL, FLAGS_logfile_mode);
if (fd == -1) return false;
#ifdef HAVE_FCNTL
// Mark the file close-on-exec. We don't really care if this fails
fcntl(fd, F_SETFD, FD_CLOEXEC);
#endif
file_ = fdopen(fd, "a"); // Make a FILE*.
if (file_ == NULL) { // Man, we're screwed!
close(fd);
unlink(filename); // Erase the half-baked evidence: an unusable log file
return false;
}
// We try to create a symlink called <program_name>.<severity>,
// which is easier to use. (Every time we create a new logfile,
// we destroy the old symlink and create a new one, so it always
// points to the latest logfile.) If it fails, we're sad but it's
// no error.
if (!symlink_basename_.empty()) {
// take directory from filename
const char* slash = strrchr(filename, PATH_SEPARATOR);
const string linkname =
symlink_basename_ + '.' + LogSeverityNames[severity_];
string linkpath;
if ( slash ) linkpath = string(filename, slash-filename+1); // get dirname
linkpath += linkname;
unlink(linkpath.c_str()); // delete old one if it exists
#if defined(OS_WINDOWS)
// TODO(hamaji): Create lnk file on Windows?
#elif defined(HAVE_UNISTD_H)
// We must have unistd.h.
// Make the symlink be relative (in the same dir) so that if the
// entire log directory gets relocated the link is still valid.
const char *linkdest = slash ? (slash + 1) : filename;
if (symlink(linkdest, linkpath.c_str()) != 0) {
// silently ignore failures
}
// Make an additional link to the log file in a place specified by
// FLAGS_log_link, if indicated
if (!FLAGS_log_link.empty()) {
linkpath = FLAGS_log_link + "/" + linkname;
unlink(linkpath.c_str()); // delete old one if it exists
if (symlink(filename, linkpath.c_str()) != 0) {
// silently ignore failures
}
}
#endif
}
return true; // Everything worked
}
void LogFileObject::Write(bool force_flush,
time_t timestamp,
const char* message,
int message_len) {
MutexLock l(&lock_);
// We don't log if the base_name_ is "" (which means "don't write")
if (base_filename_selected_ && base_filename_.empty()) {
return;
}
if (static_cast<int>(file_length_ >> 20) >= MaxLogSize() ||
PidHasChanged()) {
if (file_ != NULL) fclose(file_);
file_ = NULL;
file_length_ = bytes_since_flush_ = dropped_mem_length_ = 0;
rollover_attempt_ = kRolloverAttemptFrequency-1;
}
// If there's no destination file, make one before outputting
if (file_ == NULL) {
// Try to rollover the log file every 32 log messages. The only time
// this could matter would be when we have trouble creating the log
// file. If that happens, we'll lose lots of log messages, of course!
if (++rollover_attempt_ != kRolloverAttemptFrequency) return;
rollover_attempt_ = 0;
struct ::tm tm_time;
localtime_r(&timestamp, &tm_time);
// The logfile's filename will have the date/time & pid in it
ostringstream time_pid_stream;
time_pid_stream.fill('0');
time_pid_stream << 1900+tm_time.tm_year
<< setw(2) << 1+tm_time.tm_mon
<< setw(2) << tm_time.tm_mday
<< '-'
<< setw(2) << tm_time.tm_hour
<< setw(2) << tm_time.tm_min
<< setw(2) << tm_time.tm_sec
<< '.'
<< GetMainThreadPid();
const string& time_pid_string = time_pid_stream.str();
if (base_filename_selected_) {
if (!CreateLogfile(time_pid_string)) {
perror("Could not create log file");
fprintf(stderr, "COULD NOT CREATE LOGFILE '%s'!\n",
time_pid_string.c_str());
return;
}
} else {
// If no base filename for logs of this severity has been set, use a
// default base filename of
// "<program name>.<hostname>.<user name>.log.<severity level>.". So
// logfiles will have names like
// webserver.examplehost.root.log.INFO.19990817-150000.4354, where
// 19990817 is a date (1999 August 17), 150000 is a time (15:00:00),
// and 4354 is the pid of the logging process. The date & time reflect
// when the file was created for output.
//
// Where does the file get put? Successively try the directories
// "/tmp", and "."
string stripped_filename(
glog_internal_namespace_::ProgramInvocationShortName());
string hostname;
GetHostName(&hostname);
string uidname = "invalid-user";
stripped_filename = stripped_filename+'.'+hostname+'.'
+uidname+".log."
+LogSeverityNames[severity_]+'.';
// We're going to (potentially) try to put logs in several different dirs
const vector<string> & log_dirs = GetLoggingDirectories();
// Go through the list of dirs, and try to create the log file in each
// until we succeed or run out of options
bool success = false;
for (vector<string>::const_iterator dir = log_dirs.begin();
dir != log_dirs.end();
++dir) {
base_filename_ = *dir + "/" + stripped_filename;
if ( CreateLogfile(time_pid_string) ) {
success = true;
break;
}
}
// If we never succeeded, we have to give up
if ( success == false ) {
perror("Could not create logging file");
fprintf(stderr, "COULD NOT CREATE A LOGGINGFILE %s!",
time_pid_string.c_str());
return;
}
}
// Write a header message into the log file
ostringstream file_header_stream;
file_header_stream.fill('0');
file_header_stream << "Log file created at: "
<< 1900+tm_time.tm_year << '/'
<< setw(2) << 1+tm_time.tm_mon << '/'
<< setw(2) << tm_time.tm_mday
<< ' '
<< setw(2) << tm_time.tm_hour << ':'
<< setw(2) << tm_time.tm_min << ':'
<< setw(2) << tm_time.tm_sec << '\n'
<< "Running on machine: "
<< LogDestination::hostname() << '\n'
<< "Log line format: [IWEF]mmdd hh:mm:ss.uuuuuu "
<< "threadid file:line] msg" << '\n';
const string& file_header_string = file_header_stream.str();
const int header_len = file_header_string.size();
fwrite(file_header_string.data(), 1, header_len, file_);
file_length_ += header_len;
bytes_since_flush_ += header_len;
}
// Write to LOG file
if ( !stop_writing ) {
// fwrite() doesn't return an error when the disk is full, for
// messages that are less than 4096 bytes. When the disk is full,
// it returns the message length for messages that are less than
// 4096 bytes. fwrite() returns 4096 for message lengths that are
// greater than 4096, thereby indicating an error.
errno = 0;
fwrite(message, 1, message_len, file_);
if ( FLAGS_stop_logging_if_full_disk &&
errno == ENOSPC ) { // disk full, stop writing to disk
stop_writing = true; // until the disk is
return;
} else {
file_length_ += message_len;
bytes_since_flush_ += message_len;
}
} else {
if ( CycleClock_Now() >= next_flush_time_ )
stop_writing = false; // check to see if disk has free space.
return; // no need to flush
}
// See important msgs *now*. Also, flush logs at least every 10^6 chars,
// or every "FLAGS_logbufsecs" seconds.
if ( force_flush ||
(bytes_since_flush_ >= 1000000) ||
(CycleClock_Now() >= next_flush_time_) ) {
FlushUnlocked();
#ifdef OS_LINUX
// Only consider files >= 3MiB
if (FLAGS_drop_log_memory && file_length_ >= (3 << 20)) {
// Don't evict the most recent 1-2MiB so as not to impact a tailer
// of the log file and to avoid page rounding issue on linux < 4.7
uint32 total_drop_length = (file_length_ & ~((1 << 20) - 1)) - (1 << 20);
uint32 this_drop_length = total_drop_length - dropped_mem_length_;
if (this_drop_length >= (2 << 20)) {
// Only advise when >= 2MiB to drop
posix_fadvise(fileno(file_), dropped_mem_length_, this_drop_length,
POSIX_FADV_DONTNEED);
dropped_mem_length_ = total_drop_length;
}
}
#endif
}
}
} // namespace
// Static log data space to avoid alloc failures in a LOG(FATAL)
//
// Since multiple threads may call LOG(FATAL), and we want to preserve
// the data from the first call, we allocate two sets of space. One
// for exclusive use by the first thread, and one for shared use by
// all other threads.
static Mutex fatal_msg_lock;
static CrashReason crash_reason;
static bool fatal_msg_exclusive = true;
static LogMessage::LogMessageData fatal_msg_data_exclusive;
static LogMessage::LogMessageData fatal_msg_data_shared;
#ifdef GLOG_THREAD_LOCAL_STORAGE
// Static thread-local log data space to use, because typically at most one
// LogMessageData object exists (in this case glog makes zero heap memory
// allocations).
static GLOG_THREAD_LOCAL_STORAGE bool thread_data_available = true;
static GLOG_THREAD_LOCAL_STORAGE LogMessage::LogMessageData thread_msg_data;
#endif // defined(GLOG_THREAD_LOCAL_STORAGE)
LogMessage::LogMessageData::LogMessageData()
: stream_(message_text_, LogMessage::kMaxLogMessageLen, 0) {
}
void LogMessage::LogMessageData::reset() {
stream_.reset();
}
LogMessage::LogMessage(const char* file, int line, LogSeverity severity,
int ctr, void (LogMessage::*send_method)())
: allocated_(NULL) {
Init(file, line, severity, send_method);
data_->stream_.set_ctr(ctr);
}
LogMessage::LogMessage(const char* file, int line,
const CheckOpString& result)
: allocated_(NULL) {
Init(file, line, GLOG_FATAL, &LogMessage::SendToLog);
stream() << "Check failed: " << (*result.str_) << " ";
}
LogMessage::LogMessage(const char* file, int line)
: allocated_(NULL) {
Init(file, line, GLOG_INFO, &LogMessage::SendToLog);
}
LogMessage::LogMessage(const char* file, int line, LogSeverity severity)
: allocated_(NULL) {
Init(file, line, severity, &LogMessage::SendToLog);
}
LogMessage::LogMessage(const char* file, int line, LogSeverity severity,
LogSink* sink, bool also_send_to_log)
: allocated_(NULL) {
Init(file, line, severity, also_send_to_log ? &LogMessage::SendToSinkAndLog :
&LogMessage::SendToSink);
data_->sink_ = sink; // override Init()'s setting to NULL
}
LogMessage::LogMessage(const char* file, int line, LogSeverity severity,
vector<string> *outvec)
: allocated_(NULL) {
Init(file, line, severity, &LogMessage::SaveOrSendToLog);
data_->outvec_ = outvec; // override Init()'s setting to NULL
}
LogMessage::LogMessage(const char* file, int line, LogSeverity severity,
string *message)
: allocated_(NULL) {
Init(file, line, severity, &LogMessage::WriteToStringAndLog);
data_->message_ = message; // override Init()'s setting to NULL
}
void LogMessage::Init(const char* file,
int line,
LogSeverity severity,
void (LogMessage::*send_method)()) {
allocated_ = NULL;
if (severity != GLOG_FATAL || !exit_on_dfatal) {
#ifdef GLOG_THREAD_LOCAL_STORAGE
// No need for locking, because this is thread local.
if (thread_data_available) {
thread_data_available = false;
data_ = &thread_msg_data;
// Make sure to clear log data since it may have been used and filled with
// data. We do not want to append the new message to the previous one.
data_->reset();
} else {
allocated_ = new LogMessageData();
data_ = allocated_;
}
#else // !defined(GLOG_THREAD_LOCAL_STORAGE)
allocated_ = new LogMessageData();
data_ = allocated_;
#endif // defined(GLOG_THREAD_LOCAL_STORAGE)
data_->first_fatal_ = false;
} else {
MutexLock l(&fatal_msg_lock);
if (fatal_msg_exclusive) {
fatal_msg_exclusive = false;
data_ = &fatal_msg_data_exclusive;
data_->first_fatal_ = true;
} else {
data_ = &fatal_msg_data_shared;
data_->first_fatal_ = false;
}
}
stream().fill('0');
data_->preserved_errno_ = errno;
data_->severity_ = severity;
data_->line_ = line;
data_->send_method_ = send_method;
data_->sink_ = NULL;
data_->outvec_ = NULL;
WallTime now = WallTime_Now();
data_->timestamp_ = static_cast<time_t>(now);
localtime_r(&data_->timestamp_, &data_->tm_time_);
int usecs = static_cast<int>((now - data_->timestamp_) * 1000000);
RawLog__SetLastTime(data_->tm_time_, usecs);
data_->num_chars_to_log_ = 0;
data_->num_chars_to_syslog_ = 0;
data_->basename_ = const_basename(file);
data_->fullname_ = file;
data_->has_been_flushed_ = false;
// If specified, prepend a prefix to each line. For example:
// I1018 160715 f5d4fbb0 logging.cc:1153]
// (log level, GMT month, date, time, thread_id, file basename, line)
// We exclude the thread_id for the default thread.
if (FLAGS_log_prefix && (line != kNoLogPrefix)) {
stream() << LogSeverityNames[severity][0]
<< setw(2) << 1+data_->tm_time_.tm_mon
<< setw(2) << data_->tm_time_.tm_mday
<< ' '
<< setw(2) << data_->tm_time_.tm_hour << ':'
<< setw(2) << data_->tm_time_.tm_min << ':'
<< setw(2) << data_->tm_time_.tm_sec << "."
<< setw(6) << usecs
<< ' '
<< setfill(' ') << setw(5)
<< static_cast<unsigned int>(GetTID()) << setfill('0')
<< ' '
<< data_->basename_ << ':' << data_->line_ << "] ";
}
data_->num_prefix_chars_ = data_->stream_.pcount();
if (!FLAGS_log_backtrace_at.empty()) {
char fileline[128];
snprintf(fileline, sizeof(fileline), "%s:%d", data_->basename_, line);
}
}
LogMessage::~LogMessage() {
Flush();
#ifdef GLOG_THREAD_LOCAL_STORAGE
if (data_ == &thread_msg_data)
thread_data_available = true;
#endif // defined(GLOG_THREAD_LOCAL_STORAGE)
delete allocated_;
}
int LogMessage::preserved_errno() const {
return data_->preserved_errno_;
}
ostream& LogMessage::stream() {
return data_->stream_;
}
// Flush buffered message, called by the destructor, or any other function
// that needs to synchronize the log.
void LogMessage::Flush() {
if (data_->has_been_flushed_ || data_->severity_ < FLAGS_minloglevel)
return;
data_->num_chars_to_log_ = data_->stream_.pcount();
data_->num_chars_to_syslog_ =
data_->num_chars_to_log_ - data_->num_prefix_chars_;
// Do we need to add a \n to the end of this message?
bool append_newline =
(data_->message_text_[data_->num_chars_to_log_-1] != '\n');
char original_final_char = '\0';
// If we do need to add a \n, we'll do it by violating the memory of the
// ostrstream buffer. This is quick, and we'll make sure to undo our
// modification before anything else is done with the ostrstream. It
// would be preferable not to do things this way, but it seems to be
// the best way to deal with this.
if (append_newline) {
original_final_char = data_->message_text_[data_->num_chars_to_log_];
data_->message_text_[data_->num_chars_to_log_++] = '\n';
}
// Prevent any subtle race conditions by wrapping a mutex lock around
// the actual logging action per se.
{
MutexLock l(&log_mutex);
(this->*(data_->send_method_))();
++num_messages_[static_cast<int>(data_->severity_)];
}
LogDestination::WaitForSinks(data_);
if (append_newline) {
// Fix the ostrstream back how it was before we screwed with it.
// It's 99.44% certain that we don't need to worry about doing this.
data_->message_text_[data_->num_chars_to_log_-1] = original_final_char;
}
// If errno was already set before we enter the logging call, we'll
// set it back to that value when we return from the logging call.
// It happens often that we log an error message after a syscall
// failure, which can potentially set the errno to some other
// values. We would like to preserve the original errno.
if (data_->preserved_errno_ != 0) {
errno = data_->preserved_errno_;
}
// Note that this message is now safely logged. If we're asked to flush
// again, as a result of destruction, say, we'll do nothing on future calls.
data_->has_been_flushed_ = true;
}
// Copy of first FATAL log message so that we can print it out again
// after all the stack traces. To preserve legacy behavior, we don't
// use fatal_msg_data_exclusive.
static time_t fatal_time;
static char fatal_message[256];
void ReprintFatalMessage() {
if (fatal_message[0]) {
const int n = strlen(fatal_message);
if (!FLAGS_logtostderr) {
// Also write to stderr (don't color to avoid terminal checks)
WriteToStderr(fatal_message, n);
}
LogDestination::LogToAllLogfiles(GLOG_ERROR, fatal_time, fatal_message, n);
}
}
// L >= log_mutex (callers must hold the log_mutex).
void LogMessage::SendToLog() EXCLUSIVE_LOCKS_REQUIRED(log_mutex) {
static bool already_warned_before_initgoogle = false;
log_mutex.AssertHeld();
RAW_DCHECK(data_->num_chars_to_log_ > 0 &&
data_->message_text_[data_->num_chars_to_log_-1] == '\n', "");
// Messages of a given severity get logged to lower severity logs, too
if (!already_warned_before_initgoogle && !IsGoogleLoggingInitialized()) {
const char w[] = "WARNING: Logging before InitGoogleLogging() is "
"written to STDERR\n";
WriteToStderr(w, strlen(w));
already_warned_before_initgoogle = true;
}
// global flag: never log to file if set. Also -- don't log to a
// file if we haven't parsed the command line flags to get the
// program name.
if (FLAGS_logtostderr || !IsGoogleLoggingInitialized()) {
ColoredWriteToStderr(data_->severity_,
data_->message_text_, data_->num_chars_to_log_);
// this could be protected by a flag if necessary.
LogDestination::LogToSinks(data_->severity_,
data_->fullname_, data_->basename_,
data_->line_, &data_->tm_time_,
data_->message_text_ + data_->num_prefix_chars_,
(data_->num_chars_to_log_ -
data_->num_prefix_chars_ - 1));
} else {
// log this message to all log files of severity <= severity_
LogDestination::LogToAllLogfiles(data_->severity_, data_->timestamp_,
data_->message_text_,
data_->num_chars_to_log_);
LogDestination::MaybeLogToStderr(data_->severity_, data_->message_text_,
data_->num_chars_to_log_);
LogDestination::LogToSinks(data_->severity_,
data_->fullname_, data_->basename_,
data_->line_, &data_->tm_time_,
data_->message_text_ + data_->num_prefix_chars_,
(data_->num_chars_to_log_
- data_->num_prefix_chars_ - 1));
// NOTE: -1 removes trailing \n
}
// If we log a FATAL message, flush all the log destinations, then toss
// a signal for others to catch. We leave the logs in a state that
// someone else can use them (as long as they flush afterwards)
if (data_->severity_ == GLOG_FATAL && exit_on_dfatal) {
if (data_->first_fatal_) {
// Store crash information so that it is accessible from within signal
// handlers that may be invoked later.
RecordCrashReason(&crash_reason);
SetCrashReason(&crash_reason);
// Store shortened fatal message for other logs and GWQ status
const int copy = min<int>(data_->num_chars_to_log_,
sizeof(fatal_message)-1);
memcpy(fatal_message, data_->message_text_, copy);
fatal_message[copy] = '\0';
fatal_time = data_->timestamp_;
}
if (!FLAGS_logtostderr) {
for (int i = 0; i < NUM_SEVERITIES; ++i) {
if ( LogDestination::log_destinations_[i] )
LogDestination::log_destinations_[i]->logger_->Write(true, 0, "", 0);
}
}
// release the lock that our caller (directly or indirectly)
// LogMessage::~LogMessage() grabbed so that signal handlers
// can use the logging facility. Alternately, we could add
// an entire unsafe logging interface to bypass locking
// for signal handlers but this seems simpler.
log_mutex.Unlock();
LogDestination::WaitForSinks(data_);
const char* message = "*** Check failure stack trace: ***\n";
if (write(STDERR_FILENO, message, strlen(message)) < 0) {
// Ignore errors.
}
Fail();
}
}
void LogMessage::RecordCrashReason(
glog_internal_namespace_::CrashReason* reason) {
reason->filename = fatal_msg_data_exclusive.fullname_;
reason->line_number = fatal_msg_data_exclusive.line_;
reason->message = fatal_msg_data_exclusive.message_text_ +
fatal_msg_data_exclusive.num_prefix_chars_;
reason->depth = 0;
}
#ifdef HAVE___ATTRIBUTE__
# define ATTRIBUTE_NORETURN __attribute__((noreturn))
#else
# define ATTRIBUTE_NORETURN
#endif
#if defined(OS_WINDOWS)
__declspec(noreturn)
#endif
static void logging_fail() ATTRIBUTE_NORETURN;
static void logging_fail() {
abort();
}
typedef void (*logging_fail_func_t)() ATTRIBUTE_NORETURN;
GOOGLE_GLOG_DLL_DECL
logging_fail_func_t g_logging_fail_func = &logging_fail;
void InstallFailureFunction(void (*fail_func)()) {
g_logging_fail_func = (logging_fail_func_t)fail_func;
}
void LogMessage::Fail() {
g_logging_fail_func();
}
// L >= log_mutex (callers must hold the log_mutex).
void LogMessage::SendToSink() EXCLUSIVE_LOCKS_REQUIRED(log_mutex) {
if (data_->sink_ != NULL) {
RAW_DCHECK(data_->num_chars_to_log_ > 0 &&
data_->message_text_[data_->num_chars_to_log_-1] == '\n', "");
data_->sink_->send(data_->severity_, data_->fullname_, data_->basename_,
data_->line_, &data_->tm_time_,
data_->message_text_ + data_->num_prefix_chars_,
(data_->num_chars_to_log_ -
data_->num_prefix_chars_ - 1));
}
}
// L >= log_mutex (callers must hold the log_mutex).
void LogMessage::SendToSinkAndLog() EXCLUSIVE_LOCKS_REQUIRED(log_mutex) {
SendToSink();
SendToLog();
}
// L >= log_mutex (callers must hold the log_mutex).
void LogMessage::SaveOrSendToLog() EXCLUSIVE_LOCKS_REQUIRED(log_mutex) {
if (data_->outvec_ != NULL) {
RAW_DCHECK(data_->num_chars_to_log_ > 0 &&
data_->message_text_[data_->num_chars_to_log_-1] == '\n', "");
// Omit prefix of message and trailing newline when recording in outvec_.
const char *start = data_->message_text_ + data_->num_prefix_chars_;
int len = data_->num_chars_to_log_ - data_->num_prefix_chars_ - 1;
data_->outvec_->push_back(string(start, len));
} else {
SendToLog();
}
}
void LogMessage::WriteToStringAndLog() EXCLUSIVE_LOCKS_REQUIRED(log_mutex) {
if (data_->message_ != NULL) {
RAW_DCHECK(data_->num_chars_to_log_ > 0 &&
data_->message_text_[data_->num_chars_to_log_-1] == '\n', "");
// Omit prefix of message and trailing newline when writing to message_.
const char *start = data_->message_text_ + data_->num_prefix_chars_;
int len = data_->num_chars_to_log_ - data_->num_prefix_chars_ - 1;
data_->message_->assign(start, len);
}
SendToLog();
}
// L >= log_mutex (callers must hold the log_mutex).
void LogMessage::SendToSyslogAndLog() {
#ifdef HAVE_SYSLOG_H
// Before any calls to syslog(), make a single call to openlog()
static bool openlog_already_called = false;
if (!openlog_already_called) {
openlog(glog_internal_namespace_::ProgramInvocationShortName(),
LOG_CONS | LOG_NDELAY | LOG_PID,
LOG_USER);
openlog_already_called = true;
}
// This array maps Google severity levels to syslog levels
const int SEVERITY_TO_LEVEL[] = { LOG_INFO, LOG_WARNING, LOG_ERR, LOG_EMERG };
syslog(LOG_USER | SEVERITY_TO_LEVEL[static_cast<int>(data_->severity_)], "%.*s",
int(data_->num_chars_to_syslog_),
data_->message_text_ + data_->num_prefix_chars_);
SendToLog();
#else
LOG(ERROR) << "No syslog support: message=" << data_->message_text_;
#endif
}
base::Logger* base::GetLogger(LogSeverity severity) {
MutexLock l(&log_mutex);
return LogDestination::log_destination(severity)->logger_;
}
void base::SetLogger(LogSeverity severity, base::Logger* logger) {
MutexLock l(&log_mutex);
LogDestination::log_destination(severity)->logger_ = logger;
}
// L < log_mutex. Acquires and releases mutex_.
int64 LogMessage::num_messages(int severity) {
MutexLock l(&log_mutex);
return num_messages_[severity];
}
// Output the COUNTER value. This is only valid if ostream is a
// LogStream.
ostream& operator<<(ostream &os, const PRIVATE_Counter&) {
#ifdef DISABLE_RTTI
LogMessage::LogStream *log = static_cast<LogMessage::LogStream*>(&os);
#else
LogMessage::LogStream *log = dynamic_cast<LogMessage::LogStream*>(&os);
#endif
CHECK(log && log == log->self())
<< "You must not use COUNTER with non-glog ostream";
os << log->ctr();
return os;
}
ErrnoLogMessage::ErrnoLogMessage(const char* file, int line,
LogSeverity severity, int ctr,
void (LogMessage::*send_method)())
: LogMessage(file, line, severity, ctr, send_method) {
}
ErrnoLogMessage::~ErrnoLogMessage() {
// Don't access errno directly because it may have been altered
// while streaming the message.
stream() << ": " << StrError(preserved_errno()) << " ["
<< preserved_errno() << "]";
}
void FlushLogFiles(LogSeverity min_severity) {
LogDestination::FlushLogFiles(min_severity);
}
void FlushLogFilesUnsafe(LogSeverity min_severity) {
LogDestination::FlushLogFilesUnsafe(min_severity);
}
void SetLogDestination(LogSeverity severity, const char* base_filename) {
LogDestination::SetLogDestination(severity, base_filename);
}
void SetLogSymlink(LogSeverity severity, const char* symlink_basename) {
LogDestination::SetLogSymlink(severity, symlink_basename);
}
LogSink::~LogSink() {
}
void LogSink::WaitTillSent() {
// noop default
}
string LogSink::ToString(LogSeverity severity, const char* file, int line,
const struct ::tm* tm_time,
const char* message, size_t message_len) {
ostringstream stream(string(message, message_len));
stream.fill('0');
// FIXME(jrvb): Updating this to use the correct value for usecs
// requires changing the signature for both this method and
// LogSink::send(). This change needs to be done in a separate CL
// so subclasses of LogSink can be updated at the same time.
int usecs = 0;
stream << LogSeverityNames[severity][0]
<< setw(2) << 1+tm_time->tm_mon
<< setw(2) << tm_time->tm_mday
<< ' '
<< setw(2) << tm_time->tm_hour << ':'
<< setw(2) << tm_time->tm_min << ':'
<< setw(2) << tm_time->tm_sec << '.'
<< setw(6) << usecs
<< ' '
<< setfill(' ') << setw(5) << GetTID() << setfill('0')
<< ' '
<< file << ':' << line << "] ";
stream << string(message, message_len);
return stream.str();
}
void AddLogSink(LogSink *destination) {
LogDestination::AddLogSink(destination);
}
void RemoveLogSink(LogSink *destination) {
LogDestination::RemoveLogSink(destination);
}
void SetLogFilenameExtension(const char* ext) {
LogDestination::SetLogFilenameExtension(ext);
}
void SetStderrLogging(LogSeverity min_severity) {
LogDestination::SetStderrLogging(min_severity);
}
void LogToStderr() {
LogDestination::LogToStderr();
}
namespace base {
namespace internal {
bool GetExitOnDFatal() {
MutexLock l(&log_mutex);
return exit_on_dfatal;
}
// Determines whether we exit the program for a LOG(DFATAL) message in
// debug mode. It does this by skipping the call to Fail/FailQuietly.
// This is intended for testing only.
//
// This can have some effects on LOG(FATAL) as well. Failure messages
// are always allocated (rather than sharing a buffer), the crash
// reason is not recorded, the "gwq" status message is not updated,
// and the stack trace is not recorded. The LOG(FATAL) *will* still
// exit the program. Since this function is used only in testing,
// these differences are acceptable.
void SetExitOnDFatal(bool value) {
MutexLock l(&log_mutex);
exit_on_dfatal = value;
}
} // namespace internal
} // namespace base
static void GetTempDirectories(vector<string>* list) {
list->clear();
#ifdef OS_WINDOWS
// On windows we'll try to find a directory in this order:
// C:/Documents & Settings/whomever/TEMP (or whatever GetTempPath() is)
// C:/TMP/
// C:/TEMP/
// C:/WINDOWS/ or C:/WINNT/
// .
char tmp[MAX_PATH];
if (GetTempPathA(MAX_PATH, tmp))
list->push_back(tmp);
list->push_back("C:\\tmp\\");
list->push_back("C:\\temp\\");
#else
// Directories, in order of preference. If we find a dir that
// exists, we stop adding other less-preferred dirs
const char * candidates[] = {
// Non-null only during unittest/regtest
getenv("TEST_TMPDIR"),
// Explicitly-supplied temp dirs
getenv("TMPDIR"), getenv("TMP"),
// If all else fails
"/tmp",
};
for (size_t i = 0; i < ARRAYSIZE(candidates); i++) {
const char *d = candidates[i];
if (!d) continue; // Empty env var
// Make sure we don't surprise anyone who's expecting a '/'
string dstr = d;
if (dstr[dstr.size() - 1] != '/') {
dstr += "/";
}
list->push_back(dstr);
struct stat statbuf;
if (!stat(d, &statbuf) && S_ISDIR(statbuf.st_mode)) {
// We found a dir that exists - we're done.
return;
}
}
#endif
}
static vector<string>* logging_directories_list;
const vector<string>& GetLoggingDirectories() {
// Not strictly thread-safe but we're called early in InitGoogle().
if (logging_directories_list == NULL) {
logging_directories_list = new vector<string>;
if ( !FLAGS_log_dir.empty() ) {
// A dir was specified, we should use it
logging_directories_list->push_back(FLAGS_log_dir.c_str());
} else {
GetTempDirectories(logging_directories_list);
#ifdef OS_WINDOWS
char tmp[MAX_PATH];
if (GetWindowsDirectoryA(tmp, MAX_PATH))
logging_directories_list->push_back(tmp);
logging_directories_list->push_back(".\\");
#else
logging_directories_list->push_back("./");
#endif
}
}
return *logging_directories_list;
}
void TestOnly_ClearLoggingDirectoriesList() {
fprintf(stderr, "TestOnly_ClearLoggingDirectoriesList should only be "
"called from test code.\n");
delete logging_directories_list;
logging_directories_list = NULL;
}
void GetExistingTempDirectories(vector<string>* list) {
GetTempDirectories(list);
vector<string>::iterator i_dir = list->begin();
while( i_dir != list->end() ) {
// zero arg to access means test for existence; no constant
// defined on windows
if ( access(i_dir->c_str(), 0) ) {
i_dir = list->erase(i_dir);
} else {
++i_dir;
}
}
}
void TruncateLogFile(const char *path, int64 limit, int64 keep) {
#ifdef HAVE_UNISTD_H
struct stat statbuf;
const int kCopyBlockSize = 8 << 10;
char copybuf[kCopyBlockSize];
int64 read_offset, write_offset;
// Don't follow symlinks unless they're our own fd symlinks in /proc
int flags = O_RDWR;
// TODO(hamaji): Support other environments.
#ifdef OS_LINUX
const char *procfd_prefix = "/proc/self/fd/";
if (strncmp(procfd_prefix, path, strlen(procfd_prefix))) flags |= O_NOFOLLOW;
#endif
int fd = open(path, flags);
if (fd == -1) {
if (errno == EFBIG) {
// The log file in question has got too big for us to open. The
// real fix for this would be to compile logging.cc (or probably
// all of base/...) with -D_FILE_OFFSET_BITS=64 but that's
// rather scary.
// Instead just truncate the file to something we can manage
if (truncate(path, 0) == -1) {
PLOG(ERROR) << "Unable to truncate " << path;
} else {
LOG(ERROR) << "Truncated " << path << " due to EFBIG error";
}
} else {
PLOG(ERROR) << "Unable to open " << path;
}
return;
}
if (fstat(fd, &statbuf) == -1) {
PLOG(ERROR) << "Unable to fstat()";
goto out_close_fd;
}
// See if the path refers to a regular file bigger than the
// specified limit
if (!S_ISREG(statbuf.st_mode)) goto out_close_fd;
if (statbuf.st_size <= limit) goto out_close_fd;
if (statbuf.st_size <= keep) goto out_close_fd;
// This log file is too large - we need to truncate it
LOG(INFO) << "Truncating " << path << " to " << keep << " bytes";
// Copy the last "keep" bytes of the file to the beginning of the file
read_offset = statbuf.st_size - keep;
write_offset = 0;
int bytesin, bytesout;
while ((bytesin = pread(fd, copybuf, sizeof(copybuf), read_offset)) > 0) {
bytesout = pwrite(fd, copybuf, bytesin, write_offset);
if (bytesout == -1) {
PLOG(ERROR) << "Unable to write to " << path;
break;
} else if (bytesout != bytesin) {
LOG(ERROR) << "Expected to write " << bytesin << ", wrote " << bytesout;
}
read_offset += bytesin;
write_offset += bytesout;
}
if (bytesin == -1) PLOG(ERROR) << "Unable to read from " << path;
// Truncate the remainder of the file. If someone else writes to the
// end of the file after our last read() above, we lose their latest
// data. Too bad ...
if (ftruncate(fd, write_offset) == -1) {
PLOG(ERROR) << "Unable to truncate " << path;
}
out_close_fd:
close(fd);
#else
LOG(ERROR) << "No log truncation support.";
#endif
}
void TruncateStdoutStderr() {
#ifdef HAVE_UNISTD_H
int64 limit = MaxLogSize() << 20;
int64 keep = 1 << 20;
TruncateLogFile("/proc/self/fd/1", limit, keep);
TruncateLogFile("/proc/self/fd/2", limit, keep);
#else
LOG(ERROR) << "No log truncation support.";
#endif
}
// Helper functions for string comparisons.
#define DEFINE_CHECK_STROP_IMPL(name, func, expected) \
string* Check##func##expected##Impl(const char* s1, const char* s2, \
const char* names) { \
bool equal = s1 == s2 || (s1 && s2 && !func(s1, s2)); \
if (equal == expected) return NULL; \
else { \
ostringstream ss; \
if (!s1) s1 = ""; \
if (!s2) s2 = ""; \
ss << #name " failed: " << names << " (" << s1 << " vs. " << s2 << ")"; \
return new string(ss.str()); \
} \
}
DEFINE_CHECK_STROP_IMPL(CHECK_STREQ, strcmp, true)
DEFINE_CHECK_STROP_IMPL(CHECK_STRNE, strcmp, false)
DEFINE_CHECK_STROP_IMPL(CHECK_STRCASEEQ, strcasecmp, true)
DEFINE_CHECK_STROP_IMPL(CHECK_STRCASENE, strcasecmp, false)
#undef DEFINE_CHECK_STROP_IMPL
int posix_strerror_r(int err, char *buf, size_t len) {
// Sanity check input parameters
if (buf == NULL || len <= 0) {
errno = EINVAL;
return -1;
}
// Reset buf and errno, and try calling whatever version of strerror_r()
// is implemented by glibc
buf[0] = '\000';
int old_errno = errno;
errno = 0;
char *rc = reinterpret_cast<char *>(strerror_r(err, buf, len));
// Both versions set errno on failure
if (errno) {
// Should already be there, but better safe than sorry
buf[0] = '\000';
return -1;
}
errno = old_errno;
// POSIX is vague about whether the string will be terminated, although
// is indirectly implies that typically ERANGE will be returned, instead
// of truncating the string. This is different from the GNU implementation.
// We play it safe by always terminating the string explicitly.
buf[len-1] = '\000';
// If the function succeeded, we can use its exit code to determine the
// semantics implemented by glibc
if (!rc) {
return 0;
} else {
// GNU semantics detected
if (rc == buf) {
return 0;
} else {
buf[0] = '\000';
#if defined(OS_MACOSX) || defined(OS_FREEBSD) || defined(OS_OPENBSD)
if (reinterpret_cast<intptr_t>(rc) < sys_nerr) {
// This means an error on MacOSX or FreeBSD.
return -1;
}
#endif
strncat(buf, rc, len-1);
return 0;
}
}
}
string StrError(int err) {
char buf[100];
int rc = posix_strerror_r(err, buf, sizeof(buf));
if ((rc < 0) || (buf[0] == '\000')) {
snprintf(buf, sizeof(buf), "Error number %d", err);
}
return buf;
}
LogMessageFatal::LogMessageFatal(const char* file, int line) :
LogMessage(file, line, GLOG_FATAL) {}
LogMessageFatal::LogMessageFatal(const char* file, int line,
const CheckOpString& result) :
LogMessage(file, line, result) {}
LogMessageFatal::~LogMessageFatal() {
Flush();
LogMessage::Fail();
}
namespace base {
CheckOpMessageBuilder::CheckOpMessageBuilder(const char *exprtext)
: stream_(new ostringstream) {
*stream_ << exprtext << " (";
}
CheckOpMessageBuilder::~CheckOpMessageBuilder() {
delete stream_;
}
ostream* CheckOpMessageBuilder::ForVar2() {
*stream_ << " vs. ";
return stream_;
}
string* CheckOpMessageBuilder::NewString() {
*stream_ << ")";
return new string(stream_->str());
}
} // namespace base
template <>
void MakeCheckOpValueString(std::ostream* os, const char& v) {
if (v >= 32 && v <= 126) {
(*os) << "'" << v << "'";
} else {
(*os) << "char value " << (short)v;
}
}
template <>
void MakeCheckOpValueString(std::ostream* os, const signed char& v) {
if (v >= 32 && v <= 126) {
(*os) << "'" << v << "'";
} else {
(*os) << "signed char value " << (short)v;
}
}
template <>
void MakeCheckOpValueString(std::ostream* os, const unsigned char& v) {
if (v >= 32 && v <= 126) {
(*os) << "'" << v << "'";
} else {
(*os) << "unsigned char value " << (unsigned short)v;
}
}
void InitGoogleLogging(const char* argv0) {
glog_internal_namespace_::InitGoogleLoggingUtilities(argv0);
}
void ShutdownGoogleLogging() {
glog_internal_namespace_::ShutdownGoogleLoggingUtilities();
LogDestination::DeleteLogDestinations();
delete logging_directories_list;
logging_directories_list = NULL;
}
_END_GOOGLE_NAMESPACE_