| /* ***** BEGIN LICENSE BLOCK ***** |
| * Version: NPL 1.1/GPL 2.0/LGPL 2.1 |
| * |
| * The contents of this file are subject to the Netscape Public License |
| * Version 1.1 (the "License"); you may not use this file except in |
| * compliance with the License. You may obtain a copy of the License at |
| * http://www.mozilla.org/NPL/ |
| * |
| * Software distributed under the License is distributed on an "AS IS" basis, |
| * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License |
| * for the specific language governing rights and limitations under the |
| * License. |
| * |
| * The Original Code is JavaScript Engine testing utilities. |
| * |
| * The Initial Developer of the Original Code is Netscape Communications Corp. |
| * Portions created by the Initial Developer are Copyright (C) 2002 |
| * the Initial Developer. All Rights Reserved. |
| * |
| * Contributor(s): pschwartau@netscape.com |
| * |
| * Alternatively, the contents of this file may be used under the terms of |
| * either the GNU General Public License Version 2 or later (the "GPL"), or |
| * the GNU Lesser General Public License Version 2.1 or later (the "LGPL"), |
| * in which case the provisions of the GPL or the LGPL are applicable instead |
| * of those above. If you wish to allow use of your version of this file only |
| * under the terms of either the GPL or the LGPL, and not to allow others to |
| * use your version of this file under the terms of the NPL, indicate your |
| * decision by deleting the provisions above and replace them with the notice |
| * and other provisions required by the GPL or the LGPL. If you do not delete |
| * the provisions above, a recipient may use your version of this file under |
| * the terms of any one of the NPL, the GPL or the LGPL. |
| * |
| * ***** END LICENSE BLOCK ***** |
| * |
| * |
| * Date: 18 Feb 2002 |
| * SUMMARY: Testing re.exec(str) when re.lastIndex is < 0 or > str.length |
| * |
| * Case 1: If re has the global flag set, then re(str) should be null |
| * Case 2: If re doesn't have this set, then re(str) should be unaffected |
| * |
| * See http://bugzilla.mozilla.org/show_bug.cgi?id=76717 |
| * |
| * |
| * From the ECMA-262 Final spec: |
| * |
| * 15.10.6.2 RegExp.prototype.exec(string) |
| * Performs a regular expression match of string against the regular |
| * expression and returns an Array object containing the results of |
| * the match, or null if the string did not match. |
| * |
| * The string ToString(string) is searched for an occurrence of the |
| * regular expression pattern as follows: |
| * |
| * 1. Let S be the value of ToString(string). |
| * 2. Let length be the length of S. |
| * 3. Let lastIndex be the value of the lastIndex property. |
| * 4. Let i be the value of ToInteger(lastIndex). |
| * 5. If the global property is false, let i = 0. |
| * 6. If i < 0 or i > length then set lastIndex to 0 and return null. |
| * 7. Call [[Match]], giving it the arguments S and i. |
| * If [[Match]] returned failure, go to step 8; |
| * otherwise let r be its State result and go to step 10. |
| * 8. Let i = i+1. |
| * 9. Go to step 6. |
| * 10. Let e be r's endIndex value. |
| * 11. If the global property is true, set lastIndex to e. |
| * |
| * etc. |
| * |
| * |
| * So: |
| * |
| * A. If the global flag is not set, |lastIndex| is set to 0 |
| * before the match is attempted; thus the match is unaffected. |
| * |
| * B. If the global flag IS set and re.lastIndex is >= 0 and <= str.length, |
| * |lastIndex| is incremented every time there is a match; not from |
| * i to i+1, but from i to "endIndex" e: |
| * |
| * e = (index of last input character matched so far by the pattern) + 1 |
| * |
| * The match is then attempted from this position in the string (Step 7). |
| * |
| * C. When the global flag IS set and re.lastIndex is < 0 or > str.length, |
| * |lastIndex| is set to 0 and the match returns null. |
| * |
| * |
| * Note the |lastIndex| property is writeable, and may be set arbitrarily |
| * by the programmer - and we will do that below. |
| * |
| */ |
| //----------------------------------------------------------------------------- |
| var i = 0; |
| var bug = 76717; |
| var summary = 'Testing re.exec(str) when re.lastIndex is < 0 or > str.length'; |
| var status = ''; |
| var statusmessages = new Array(); |
| var pattern = ''; |
| var patterns = new Array(); |
| var string = ''; |
| var strings = new Array(); |
| var actualmatch = ''; |
| var actualmatches = new Array(); |
| var expectedmatch = ''; |
| var expectedmatches = new Array(); |
| |
| |
| /****************************************************************************** |
| * |
| * Case 1 : when the global flag is set - |
| * |
| *****************************************************************************/ |
| pattern = /abc/gi; |
| string = 'AbcaBcabC'; |
| |
| status = inSection(1); |
| actualmatch = pattern.exec(string); |
| expectedmatch = Array('Abc'); |
| addThis(); |
| |
| status = inSection(2); |
| actualmatch = pattern.exec(string); |
| expectedmatch = Array('aBc'); |
| addThis(); |
| |
| status = inSection(3); |
| actualmatch = pattern.exec(string); |
| expectedmatch = Array('abC'); |
| addThis(); |
| |
| /* |
| * At this point |lastIndex| is > string.length, so the match should be null - |
| */ |
| status = inSection(4); |
| actualmatch = pattern.exec(string); |
| expectedmatch = null; |
| addThis(); |
| |
| /* |
| * Now try some edge-case values. Thanks to the work done in |
| * http://bugzilla.mozilla.org/show_bug.cgi?id=124339, |lastIndex| |
| * is now stored as a double instead of a uint32 (unsigned integer). |
| * |
| * Note 2^32 -1 is the upper bound for uint32's, but doubles can go |
| * all the way up to Number.MAX_VALUE. So that's why we need cases |
| * between those two numbers. |
| */ |
| status = inSection(6); |
| pattern.lastIndex = Math.pow(2,32); |
| actualmatch = pattern.exec(string); |
| expectedmatch = null; |
| addThis(); |
| |
| status = inSection(8); |
| pattern.lastIndex = Math.pow(2,32) + 1; |
| actualmatch = pattern.exec(string); |
| expectedmatch = null; |
| addThis(); |
| |
| status = inSection(10); |
| pattern.lastIndex = Math.pow(2,32) * 2; |
| actualmatch = pattern.exec(string); |
| expectedmatch = null; |
| addThis(); |
| |
| status = inSection(12); |
| pattern.lastIndex = Math.pow(2,40); |
| actualmatch = pattern.exec(string); |
| expectedmatch = null; |
| addThis(); |
| |
| status = inSection(14); |
| pattern.lastIndex = Number.MAX_VALUE; |
| actualmatch = pattern.exec(string); |
| expectedmatch = null; |
| addThis(); |
| |
| |
| |
| /****************************************************************************** |
| * |
| * Case 2: repeat all the above cases WITHOUT the global flag set. |
| * According to EMCA. |lastIndex| should get set to 0 before the match. |
| * |
| * Therefore re.exec(str) should be unaffected; thus our expected values |
| * below are now DIFFERENT when |lastIndex| is < 0 or > str.length |
| * |
| *****************************************************************************/ |
| |
| pattern = /abc/i; |
| string = 'AbcaBcabC'; |
| |
| status = inSection(16); |
| actualmatch = pattern.exec(string); |
| expectedmatch = Array('Abc'); |
| addThis(); |
| |
| status = inSection(17); |
| actualmatch = pattern.exec(string); |
| expectedmatch = Array('Abc'); // NOT Array('aBc') as before - |
| addThis(); |
| |
| status = inSection(18); |
| actualmatch = pattern.exec(string); |
| expectedmatch = Array('Abc'); // NOT Array('abC') as before - |
| addThis(); |
| |
| /* |
| * At this point above, |lastIndex| WAS > string.length, but not here - |
| */ |
| status = inSection(19); |
| actualmatch = pattern.exec(string); |
| expectedmatch = Array('Abc') // NOT null as before - |
| addThis(); |
| |
| /* |
| * Now let's set |lastIndex| to -1 |
| */ |
| status = inSection(20); |
| pattern.lastIndex = -1; |
| actualmatch = pattern.exec(string); |
| expectedmatch = Array('Abc') // NOT null as before - |
| addThis(); |
| |
| /* |
| * Now try some edge-case values. Thanks to the work done in |
| * http://bugzilla.mozilla.org/show_bug.cgi?id=124339, |lastIndex| |
| * is now stored as a double instead of a uint32 (unsigned integer). |
| * |
| * Note 2^32 -1 is the upper bound for uint32's, but doubles can go |
| * all the way up to Number.MAX_VALUE. So that's why we need cases |
| * between those two numbers. |
| */ |
| status = inSection(21); |
| pattern.lastIndex = Math.pow(2,32); |
| actualmatch = pattern.exec(string); |
| expectedmatch = Array('Abc') // NOT null as before - |
| addThis(); |
| |
| status = inSection(22); |
| pattern.lastIndex = -Math.pow(2,32); |
| actualmatch = pattern.exec(string); |
| expectedmatch = Array('Abc') // NOT null as before - |
| addThis(); |
| |
| status = inSection(23); |
| pattern.lastIndex = Math.pow(2,32) + 1; |
| actualmatch = pattern.exec(string); |
| expectedmatch = Array('Abc') // NOT null as before - |
| addThis(); |
| |
| status = inSection(24); |
| pattern.lastIndex = -(Math.pow(2,32) + 1); |
| actualmatch = pattern.exec(string); |
| expectedmatch = Array('Abc') // NOT null as before - |
| addThis(); |
| |
| status = inSection(25); |
| pattern.lastIndex = Math.pow(2,32) * 2; |
| actualmatch = pattern.exec(string); |
| expectedmatch = Array('Abc') // NOT null as before - |
| addThis(); |
| |
| status = inSection(26); |
| pattern.lastIndex = -Math.pow(2,32) * 2; |
| actualmatch = pattern.exec(string); |
| expectedmatch = Array('Abc') // NOT null as before - |
| addThis(); |
| |
| status = inSection(27); |
| pattern.lastIndex = Math.pow(2,40); |
| actualmatch = pattern.exec(string); |
| expectedmatch = Array('Abc') // NOT null as before -; |
| addThis(); |
| |
| status = inSection(28); |
| pattern.lastIndex = -Math.pow(2,40); |
| actualmatch = pattern.exec(string); |
| expectedmatch = Array('Abc') // NOT null as before - |
| addThis(); |
| |
| status = inSection(29); |
| pattern.lastIndex = Number.MAX_VALUE; |
| actualmatch = pattern.exec(string); |
| expectedmatch = Array('Abc') // NOT null as before - |
| addThis(); |
| |
| status = inSection(30); |
| pattern.lastIndex = -Number.MAX_VALUE; |
| actualmatch = pattern.exec(string); |
| expectedmatch = Array('Abc') // NOT null as before - |
| addThis(); |
| |
| |
| |
| |
| //------------------------------------------------------------------------------------------------- |
| test(); |
| //------------------------------------------------------------------------------------------------- |
| |
| |
| |
| function addThis() |
| { |
| statusmessages[i] = status; |
| patterns[i] = pattern; |
| strings[i] = string; |
| actualmatches[i] = actualmatch; |
| expectedmatches[i] = expectedmatch; |
| i++; |
| } |
| |
| |
| function test() |
| { |
| enterFunc ('test'); |
| printBugNumber (bug); |
| printStatus (summary); |
| testRegExp(statusmessages, patterns, strings, actualmatches, expectedmatches); |
| exitFunc ('test'); |
| } |