blob: 6300c319e0d2c30d95d50c5dc7a3cb59880c1119 [file] [log] [blame]
#!/usr/bin/env ruby
# Copyright (C) 2013-2021 Apple Inc. All rights reserved.
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions
# are met:
#
# 1. Redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer.
# 2. Redistributions in binary form must reproduce the above copyright
# notice, this list of conditions and the following disclaimer in the
# documentation and/or other materials provided with the distribution.
#
# THIS SOFTWARE IS PROVIDED BY APPLE AND ITS CONTRIBUTORS "AS IS" AND ANY
# EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
# WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
# DISCLAIMED. IN NO EVENT SHALL APPLE OR ITS CONTRIBUTORS BE LIABLE FOR ANY
# DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
# (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
# LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
# ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
# THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
require 'fileutils'
require 'getoptlong'
require 'ostruct'
require 'pathname'
require 'rbconfig'
require 'set'
require 'tempfile'
require 'uri'
require 'yaml'
require_relative "webkitruby/jsc-stress-test/test-result-evaluator"
require_relative "webkitruby/jsc-stress-test/executor"
module URI
class SSH < Generic
DEFAULT_PORT = 22
end
@@schemes['SSH'] = SSH
end
class String
def scrub
encode("UTF-16be", :invalid=>:replace, :replace=>"?").encode('UTF-8')
end
end
Signal.trap("TERM") {
# Occasionally, the jscore-test step fails to produce any output for 10' at
# which point it gets killed by the buildbot code. Try to diagnose.
puts("Received SIGTERM")
puts(Thread.current.backtrace)
}
RemoteHost = Struct.new(:name, :user, :host, :port, :remoteDirectory, :identity_file_path)
THIS_SCRIPT_PATH = Pathname.new(__FILE__).realpath
SCRIPTS_PATH = THIS_SCRIPT_PATH.dirname
WEBKIT_PATH = SCRIPTS_PATH.dirname.dirname
LAYOUTTESTS_PATH = WEBKIT_PATH + "LayoutTests"
WASMTESTS_PATH = WEBKIT_PATH + "JSTests/wasm"
JETSTREAM2_PATH = WEBKIT_PATH + "PerformanceTests/JetStream2"
CHAKRATESTS_PATH = WEBKIT_PATH + "JSTests/ChakraCore/test"
raise unless SCRIPTS_PATH.basename.to_s == "Scripts"
raise unless SCRIPTS_PATH.dirname.basename.to_s == "Tools"
HELPERS_PATH = SCRIPTS_PATH + "jsc-stress-test-helpers"
STATUS_FILE_PREFIX = "test_status_"
STATUS_FILE_PASS = "P"
STATUS_FILE_FAIL = "F"
# There are all random and adequately large to be unlikely to appear
# in practice, except as used in this file.
PARALLEL_REMOTE_WRAPPER_MARK_BEGIN = "5d65329bd1a3"
PARALLEL_REMOTE_WRAPPER_MARK_END = "a9aea5c3b843"
PARALLEL_REMOTE_STATE_LOST_MARKER = "709fb7a77c45231918eb118a"
ITERATION_LIMITS = OpenStruct.new(:infraIterationsFloor => 3,
:iterationsCeiling => 10)
REMOTE_TIMEOUT = 120
begin
require 'shellwords'
rescue Exception => e
$stderr.puts "Warning: did not find shellwords, not running any tests."
exit 0
end
$canRunDisplayProfilerOutput = false
begin
require 'rubygems'
require 'json'
require 'highline'
$canRunDisplayProfilerOutput = true
rescue Exception => e
$stderr.puts "Warning: did not find json or highline; some features will be disabled."
$stderr.puts "Run \"sudo gem install json highline\" to fix the issue."
$stderr.puts "Error: #{e.inspect}"
end
def printCommandArray(*cmd)
begin
commandArray = cmd.each{|value| Shellwords.shellescape(value.to_s)}.join(' ')
rescue
commandArray = cmd.join(' ')
end
$stderr.puts ">> #{commandArray}"
end
class CommandExecutionFailed < Exception
end
def mysys(commandArray, options={})
printCommandArray(commandArray) if $verbosity >= 1
successful = system(*commandArray)
status = $?
if successful or options[:ignoreFailure]
return
end
raise CommandExecutionFailed, "Command failed: #{status.inspect}"
end
def escapeAll(array)
array.map {
| v |
raise "Detected a non-string in #{inspect}" unless v.is_a? String
Shellwords.shellescape(v)
}.join(' ')
end
$jscPath = nil
$doNotMessWithVMPath = false
$jitTests = true
$memoryLimited = false
$outputDir = Pathname.new("results")
$verbosity = 0
$bundle = nil
$tarball = false
$tarFileName = "payload.tar.gz"
$copyVM = false
$testRunnerType = nil
$testWriter = "default"
$remoteHosts = []
$architecture = nil
$forceArchitecture = nil
$hostOS = nil
$model = nil
$filter = nil
$envVars = []
$mode = "full"
$buildType = "release"
$forceCollectContinuously = false
$reportExecutionTime = false
$ldd = nil
$artifact_exec_wrapper = nil
$numChildProcessesSetByUser = false
$runUniqueId = Random.new.bytes(16).unpack("H*")[0]
$testsDebugStream = nil # set to $stderr for debugging
def putd(s)
$testsDebugStream.puts(s) unless $testsDebugStream.nil?
end
def usage
puts "run-jsc-stress-tests -j <shell path> <collections path> [<collections path> ...]"
puts
puts "--jsc (-j) Path to JavaScriptCore build product. This option is required."
puts "--no-copy Do not copy the JavaScriptCore build product before testing."
puts " --jsc specifies an already present JavaScriptCore to test."
puts "--memory-limited Indicate that we are targeting the test for a memory limited device."
puts " Skip tests tagged with //@skip if $memoryLimited"
puts "--no-jit Do not run JIT specific tests."
puts "--force-collectContinuously Enable the collectContinuously mode even if disabled on this"
puts " platform."
puts "--output-dir (-o) Path where to put results. Default is #{$outputDir}."
puts "--verbose (-v) Print more things while running."
puts "--run-bundle Runs a bundle previously created by run-jsc-stress-tests."
puts "--tarball [fileName] Creates a tarball of the final bundle. Use name if supplied for tar file."
puts "--arch Specify architecture instead of determining from JavaScriptCore build."
puts "--force-architecture Override the architecture to run tests with."
puts " e.g. x86, x86_64, arm."
puts "--ldd Use alternate ldd"
puts "--artifact-exec-wrapper Wrapper for executing a build artifact"
puts "--os Specify os instead of determining from JavaScriptCore build."
puts " e.g. darwin, linux & windows."
puts "--shell-runner Uses the shell-based test runner instead of the default make-based runner."
puts " In general the shell runner is slower than the make runner."
puts "--make-runner Uses the faster make-based runner."
puts "--ruby-runner Uses the ruby runner for machines without unix shell or make."
puts "--test-writer [writer] Specifies the test script format."
puts " default is to use shell scripts to run the tests"
puts " \"ruby\" to use ruby scripts for systems without a unix shell."
puts "--remote Specify a remote host on which to run tests from command line argument."
puts "--remote-config-file Specify a remote host on which to run tests from JSON file."
puts "--report-execution-time Print execution time for each test."
puts "--child-processes (-c) Specify the number of child processes."
puts "--filter Only run tests whose name matches the given regular expression."
puts "--help (-h) Print this message."
puts "--env-vars Add a list of environment variables to set before running jsc."
puts " Each environment variable should be separated by a space."
puts " e.g. \"foo=bar x=y\" (no quotes). Note, if you pass DYLD_FRAMEWORK_PATH"
puts " it will override the default value."
puts "--quick (-q) Only run with the default and no-cjit-validate modes."
puts "--basic Run with default and these additional modes: no-llint,"
puts " no-cjit-validate-phases, no-cjit-collect-continuously, dfg-eager"
puts " and for FTL platforms: no-ftl, ftl-eager-no-cjit and"
puts " ftl-no-cjit-small-pool."
exit 1
end
jscArg = nil
GetoptLong.new(['--help', '-h', GetoptLong::NO_ARGUMENT],
['--jsc', '-j', GetoptLong::REQUIRED_ARGUMENT],
['--no-copy', GetoptLong::NO_ARGUMENT],
['--memory-limited', GetoptLong::NO_ARGUMENT],
['--no-jit', GetoptLong::NO_ARGUMENT],
['--force-collectContinuously', GetoptLong::NO_ARGUMENT],
['--output-dir', '-o', GetoptLong::REQUIRED_ARGUMENT],
['--run-bundle', GetoptLong::REQUIRED_ARGUMENT],
['--tarball', GetoptLong::OPTIONAL_ARGUMENT],
['--force-vm-copy', GetoptLong::NO_ARGUMENT],
['--arch', GetoptLong::REQUIRED_ARGUMENT],
['--force-architecture', GetoptLong::REQUIRED_ARGUMENT],
['--ldd', GetoptLong::REQUIRED_ARGUMENT],
['--artifact-exec-wrapper', GetoptLong::REQUIRED_ARGUMENT],
['--os', GetoptLong::REQUIRED_ARGUMENT],
['--shell-runner', GetoptLong::NO_ARGUMENT],
['--make-runner', GetoptLong::NO_ARGUMENT],
['--ruby-runner', GetoptLong::NO_ARGUMENT],
['--gnu-parallel-runner', GetoptLong::NO_ARGUMENT],
['--test-writer', GetoptLong::REQUIRED_ARGUMENT],
['--treat-failing-as-flaky', GetoptLong::REQUIRED_ARGUMENT],
['--remote', GetoptLong::REQUIRED_ARGUMENT],
['--remote-config-file', GetoptLong::REQUIRED_ARGUMENT],
['--report-execution-time', GetoptLong::NO_ARGUMENT],
['--model', GetoptLong::REQUIRED_ARGUMENT],
['--child-processes', '-c', GetoptLong::REQUIRED_ARGUMENT],
['--filter', GetoptLong::REQUIRED_ARGUMENT],
['--verbose', '-v', GetoptLong::NO_ARGUMENT],
['--env-vars', GetoptLong::REQUIRED_ARGUMENT],
['--debug', GetoptLong::NO_ARGUMENT],
['--release', GetoptLong::NO_ARGUMENT],
['--quick', '-q', GetoptLong::NO_ARGUMENT],
['--basic', GetoptLong::NO_ARGUMENT]).each {
| opt, arg |
case opt
when '--help'
usage
when '--jsc'
jscArg = arg
when '--no-copy'
$doNotMessWithVMPath = true
when '--output-dir'
$outputDir = Pathname.new(arg)
when '--memory-limited'
$memoryLimited = true
when '--no-jit'
$jitTests = false
when '--force-collectContinuously'
$forceCollectContinuously = true;
when '--verbose'
$verbosity += 1
when '--run-bundle'
$bundle = Pathname.new(arg)
when '--tarball'
$tarball = true
$copyVM = true
$tarFileName = arg unless arg == ''
when '--force-vm-copy'
$copyVM = true
when '--shell-runner'
$testRunnerType = :shell
when '--make-runner'
$testRunnerType = :make
when '--ruby-runner'
$testRunnerType = :ruby
when '--gnu-parallel-runner'
$testRunnerType = :gnuparallel
when '--test-writer'
$testWriter = arg
when '--treat-failing-as-flaky'
md = /^([^,]+),(\d+),(\d+)$/.match(arg)
if md.nil?
$stderr.puts("Could not parse argument to `--treat-failing-as-flaky`; expected `passPercentage,maxTries,maxFailing`")
exit(1)
end
passPercentage = md[1].to_f
if passPercentage.zero?
$stderr.puts("Invalid passPercentage `#{md[1]}`")
exit(1)
end
maxTries = md[2].to_i
if maxTries == 0
$stderr.puts("Invalid maxTries `#{md[2]}`")
exit(1)
end
maxFailing = md[3].to_i
if maxFailing == 0
$stderr.puts("Invalid maxFailing `#{md[3]}`")
exit(1)
end
$treatFailingAsFlaky = OpenStruct.new(:passPercentage => passPercentage,
:maxTries => maxTries,
:maxFailing => maxFailing)
when '--remote'
$copyVM = true
$tarball = true
$remote = true
uri = URI("ssh://" + arg)
$remoteHosts << RemoteHost.new("default-#{$remoteHosts.length}", uri.user, uri.host, uri.port)
when '--remote-config-file'
$remoteConfigFile = arg
when '--report-execution-time'
$reportExecutionTime = true
when '--child-processes'
$numChildProcesses = arg.to_i
$numChildProcessesSetByUser = true
when '--filter'
$filter = Regexp.new(arg)
when '--arch'
$architecture = arg
when '--force-architecture'
$architecture = arg unless $architecture
$forceArchitecture = arg
when '--ldd'
$ldd = arg
when '--artifact-exec-wrapper'
$artifact_exec_wrapper = arg
when '--os'
$hostOS = arg
when '--model'
$model = arg.gsub(/\A['"]+|['"]+\Z/, '')
when '--env-vars'
$envVars = arg.gsub(/\s+/, ' ').split(' ')
when '--quick'
$mode = "quick"
when '--basic'
$mode = "basic"
when '--debug'
$buildType = "debug"
when '--release'
$buildType = "release"
end
}
if $remoteConfigFile
file = File.read($remoteConfigFile)
config = JSON.parse(file)
# old style config allowing for only one remote
if !$remote and config['remote']
$copyVM = true
$tarball = true
$remote = true
uri = URI("ssh://" + config['remote'])
$remoteHosts = [ RemoteHost.new("default", uri.user, uri.host, uri.port) ]
if config['remoteDirectory']
$remoteHosts[0].remoteDirectory = config['remoteDirectory']
end
if config['idFilePath']
$remoteHosts[0].identity_file_path = config['idFilePath']
end
end
# we can combine --remote and a new style config
if config['remotes']
$copyVM = true
$tarball = true
$remote = true
$remoteHosts += config['remotes'].map {
| remote |
uri = URI("ssh://" + remote['address'])
host = RemoteHost.new(remote['name'], uri.user, uri.host, uri.port)
if remote['remoteDirectory']
host.remoteDirectory = remote['remoteDirectory']
end
if remote['idFilePath']
host.identity_file_path = remote['idFilePath']
print('Using identity file: ' + host.identity_file_path + "\r")
end
host
}
end
end
unless jscArg
# If we're not provided a JSC path, try to come up with a sensible JSC path automagically.
command = SCRIPTS_PATH.join("webkit-build-directory").to_s
command += ($buildType == "release") ? " --release" : " --debug"
command += " --executablePath"
output = `#{command}`.split("\n")
if !output.length
$stderr.puts "Error: must specify --jsc <path>"
exit 1
end
output = output[0]
jscArg = Pathname.new(output).join("jsc")
jscArg = Pathname.new(output).join("JavaScriptCore.framework", "Helpers", "jsc") if !File.file?(jscArg)
jscArg = Pathname.new(output).join("bin", "jsc") if !File.file?(jscArg) # Support CMake build.
if !File.file?(jscArg)
$stderr.puts "Error: must specify --jsc <path>"
exit 1
end
puts "Using the following jsc path: #{jscArg}"
end
if $doNotMessWithVMPath
$jscPath = Pathname.new(jscArg)
else
$jscPath = Pathname.new(jscArg).realpath
end
$progressMeter = ($verbosity == 0 and $stdout.tty? and $remoteHosts.length <= 1)
if $bundle
$jscPath = $bundle + ".vm" + "JavaScriptCore.framework" + "Helpers" + "jsc"
$outputDir = $bundle
end
# Try to determine architecture. Return nil on failure.
def machOArchitectureCode
begin
otoolLines = `otool -afh #{Shellwords.shellescape($jscPath.to_s)}`.split("\n")
otoolLines.each_with_index {
| value, index |
if value =~ /magic/ and value =~ /cputype/
return otoolLines[index + 1].split[1].to_i
end
}
rescue
$stderr.puts "Warning: unable to execute otool."
end
$stderr.puts "Warning: unable to determine architecture."
nil
end
def determineArchitectureFromMachOBinary
code = machOArchitectureCode
return nil unless code
is64BitFlag = 0x01000000
case code
when 7
"x86"
when 7 | is64BitFlag
"x86-64"
when 12
"arm"
when 12 | is64BitFlag
"arm64"
else
$stderr.puts "Warning: unable to determine architecture from code: #{code}"
nil
end
end
def determineArchitectureFromELFBinary
f = File.open($jscPath.to_s)
data = f.read(20)
if !(data[0,4] == "\x7F\x45\x4C\x46")
$stderr.puts "Warning: Missing ELF magic in file #{Shellwords.shellescape($jscPath.to_s)}"
return nil
end
# MIPS and PowerPC may be either big- or little-endian. S390 (which includes
# S390x) is big-endian. The rest are little-endian.
# For RISC-V, to avoid encoding problems, construct the comparison string
# by packing a char array matching the ELF's RISC-V machine value.
code = data[18, 20]
case code
when "\x03\0"
"x86"
when "\x08\0"
"mips"
when "\0\x08"
"mips"
when "\x14\0"
"powerpc"
when "\0\x14"
"powerpc"
when "\x15\0"
"powerpc64"
when "\0\x15"
"powerpc64"
when "\0\x16"
"s390"
when "\x28\0"
"arm"
when "\x3E\0"
"x86-64"
when "\xB7\0"
"arm64"
when [243, 0].pack("cc")
"riscv64"
else
$stderr.puts "Warning: unable to determine architecture from code: #{code}"
nil
end
end
def determineArchitectureFromPEBinary
f = File.open($jscPath.to_s)
data = f.read(1024)
if !(data[0, 2] == "MZ")
$stderr.puts "Warning: Missing PE magic in file #{Shellwords.shellescape($jscPath.to_s)}"
return nil
end
peHeaderAddr = data[0x3c, 4].unpack('V').first # 32-bit unsigned int little endian
if !(data[peHeaderAddr, 4] == "PE\0\0")
$stderr.puts "Warning: Incorrect PE header in file #{Shellwords.shellescape($jscPath.to_s)}"
return nil
end
machine = data[peHeaderAddr + 4, 2].unpack('v').first # 16-bit unsigned short, little endian
case machine
when 0x014c
"x86"
when 0x8664
"x86-64"
else
$stderr.puts "Warning: unsupported machine type: #{machine}"
nil
end
end
def determineArchitecture
case $hostOS
when "darwin"
determineArchitectureFromMachOBinary
when "linux"
determineArchitectureFromELFBinary
when "windows"
determineArchitectureFromPEBinary
when "playstation"
"x86-64"
else
$stderr.puts "Warning: unable to determine architecture on this platform."
nil
end
end
def determineOS
case RbConfig::CONFIG["host_os"]
when /darwin/i
"darwin"
when /linux/i
"linux"
when /mswin|mingw|cygwin/
"windows"
else
$stderr.puts "Warning: unable to determine host operating system"
nil
end
end
$hostOS = determineOS unless $hostOS
$architecture = determineArchitecture unless $architecture
$isFTLPlatform = !($architecture == "x86" || $architecture == "arm" || $architecture == "mips" || $architecture == "riscv64" || $hostOS == "windows" || $hostOS == "playstation")
if $architecture == "x86"
# The JIT is temporarily disabled on this platform since
# https://trac.webkit.org/changeset/237547
$jitTests = false
end
def isFTLEnabled
$jitTests && $isFTLPlatform
end
if !$testRunnerType
if $remote and $hostOS == "darwin"
$testRunnerType = :shell
else
$testRunnerType = :make
end
end
if $remoteHosts.length > 1 and ($testRunnerType != :make) and ($testRunnerType != :gnuparallel)
raise "Multiple remote hosts only supported with the make or gnu-parallel runners"
end
if $hostOS == "playstation" && $testWriter == "default"
$testWriter = "playstation"
end
if $testWriter
if /[^-a-zA-Z0-9_]/.match($testWriter)
raise "Invalid test writer #{$testWriter} given"
end
end
# We force all tests to use a smaller (1.5M) stack so that stack overflow tests can run faster.
BASE_OPTIONS = ["--useFTLJIT=false", "--useFunctionDotArguments=true", "--validateExceptionChecks=true", "--useDollarVM=true", "--maxPerThreadStackUsage=1572864"]
EAGER_OPTIONS = ["--thresholdForJITAfterWarmUp=10", "--thresholdForJITSoon=10", "--thresholdForOptimizeAfterWarmUp=20", "--thresholdForOptimizeAfterLongWarmUp=20", "--thresholdForOptimizeSoon=20", "--thresholdForFTLOptimizeAfterWarmUp=20", "--thresholdForFTLOptimizeSoon=20", "--thresholdForOMGOptimizeAfterWarmUp=20", "--thresholdForOMGOptimizeSoon=20", "--maximumEvalCacheableSourceLength=150000", "--useEagerCodeBlockJettisonTiming=true", "--repatchBufferingCountdown=0"]
# NOTE: Tests rely on this using scribbleFreeCells.
NO_CJIT_OPTIONS = ["--useConcurrentJIT=false", "--thresholdForJITAfterWarmUp=100", "--scribbleFreeCells=true"]
B3O1_OPTIONS = ["--defaultB3OptLevel=1", "--useDataICInOptimizingJIT=1"]
B3O0_OPTIONS = ["--maxDFGNodesInBasicBlockForPreciseAnalysis=100", "--defaultB3OptLevel=0"]
FTL_OPTIONS = ["--useFTLJIT=true"]
FORCE_LLINT_EXIT_OPTIONS = ["--forceOSRExitToLLInt=true"]
EXECUTABLE_FUZZER_OPTIONS = ["--useExecutableAllocationFuzz=true", "--fireExecutableAllocationFuzzRandomly=true"]
class BasePlan
attr_reader :directory, :arguments, :family, :name, :outputHandler, :errorHandler, :additionalEnv, :index
attr_accessor :retryParameters
@@index = 0
def initialize(directory, arguments, family, name, outputHandler, errorHandler, retryParameters)
@directory = directory
@arguments = argumentsMapper(arguments)
@family = family
@name = name
@outputHandler = outputHandler
@errorHandler = errorHandler
# A plan for which @retryParameters is not nil is being
# treated as potentially flaky.
@retryParameters = retryParameters
@additionalEnv = []
@index = @@index
@@index += 1
end
def self.mock(family, name, retryParameters=nil)
self.new("/none", [], family, name, nil, nil, retryParameters)
end
def self.create(directory, arguments, family, name, outputHandler, errorHandler)
if $runCommandOptions[:crashOK]
outputHandler = noisyOutputHandler
end
self.new(directory, arguments, family, name, outputHandler, errorHandler, $runCommandOptions[:flaky])
end
def argumentsMapper(args)
args
end
# We regularly place Plans in containers, but may modify @retryParameters
# after the fact; only hash on @index instead.
def hash
@index
end
def to_s
"#{@index}"
end
end
class TestRunner
def initialize(testRunnerType, runnerDir)
@testRunnerType = testRunnerType
@runnerDir = runnerDir
end
def prepare(runlist, serialPlans, completedPlans, remoteHosts)
prepareScripts(runlist)
prepareRunner(runlist, serialPlans, completedPlans, remoteHosts)
end
def prepareScripts(runlist)
Dir.mkdir(@runnerDir) unless @runnerDir.directory?
toDelete = []
Dir.foreach(@runnerDir) {
| filename |
if filename =~ /^test_/
toDelete << filename
end
}
toDelete.each {
| filename |
File.unlink(@runnerDir + filename)
}
# Write test scripts in parallel as this is both an expensive and a
# highly IO intensive operation, but each script is independent and
# the operation is pure other than writing the unique run script.
parallelEach(runlist) do | plan |
plan.writeRunScript(@runnerDir + "test_script_#{plan.index}")
end
end
def self.create(testRunnerType, runnerDir)
cls = nil
case testRunnerType
when :shell
cls = TestRunnerShell
when :make
cls = TestRunnerMake
when :ruby
cls = TestRunnerRuby
when :gnuparallel
cls = TestRunnerGnuParallel
else
raise "Unknown test runner type: #{testRunnerType.to_s}"
end
return cls.new(testRunnerType, runnerDir)
end
end
require_relative "webkitruby/jsc-stress-test-writer-#{$testWriter}"
def shouldCollectContinuously?
$buildType == "release" or $forceCollectContinuously
end
COLLECT_CONTINUOUSLY_OPTIONS = shouldCollectContinuously? ? ["--collectContinuously=true", "--useGenerationalGC=false", "--verifyGC=true"] : []
$serialPlans = Set.new
$runlist = []
def frameworkFromJSCPath(jscPath)
parentDirectory = jscPath.dirname
if (parentDirectory.basename.to_s == "Resources" or parentDirectory.basename.to_s == "Helpers") and parentDirectory.dirname.basename.to_s == "JavaScriptCore.framework"
parentDirectory.dirname
elsif $hostOS == "playstation"
jscPath.dirname
elsif parentDirectory.basename.to_s =~ /^Debug/ or parentDirectory.basename.to_s =~ /^Release/
jscPath.dirname + "JavaScriptCore.framework"
else
$stderr.puts "Warning: cannot identify JSC framework, doing generic VM copy."
nil
end
end
# Frequently repeated path computations. Cache results for speed.
$bundleResourcePathCache = Hash.new do |h, key|
resourcePath, benchmarkDirectory, dir = key
benchmarkDirectory.each_filename {
| pathComponent |
dir = dir.parent
}
h[key] = dir + resourcePath
end
def pathToBundleResourceFromBenchmarkDirectory(resourcePath)
$bundleResourcePathCache[[resourcePath, $benchmarkDirectory, Pathname.new(".")]]
end
def pathToVM
pathToBundleResourceFromBenchmarkDirectory($jscPath)
end
def vmCommand
cmd = [pathToVM.to_s]
if not $artifact_exec_wrapper.nil?
cmd.unshift($artifact_exec_wrapper)
end
if ($forceArchitecture)
cmd = ["/usr/bin/arch", "-" + $forceArchitecture] + cmd
end
return cmd
end
def pathToHelpers
pathToBundleResourceFromBenchmarkDirectory(".helpers")
end
$runCommandOptions = {}
$testSpecificRequiredOptions = []
$uniqueFilenameCounter = 0
def uniqueFilename(extension)
payloadDir = $outputDir + "_payload"
Dir.mkdir payloadDir unless payloadDir.directory?
result = payloadDir.realpath + "temp-#{$uniqueFilenameCounter}#{extension}"
$uniqueFilenameCounter += 1
result
end
def baseOutputName(kind)
"#{$collectionName}/#{$benchmark}.#{kind}"
end
def addRunCommandCfg(cfg, *additionalEnv)
[:kind, :command, :outputHandler, :errorHandler].each { |key|
if not cfg.has_key?(key)
raise "Missing #{key} in #{cfg}"
end
}
$didAddRunCommand = true
name = baseOutputName(cfg[:kind])
if $filter and name !~ $filter
return
end
plan = Plan.create(
$benchmarkDirectory, cfg[:command], "#{$collectionName}/#{$benchmark}", name, cfg[:outputHandler],
cfg[:errorHandler])
if cfg.has_key?(:additionalEnv)
plan.additionalEnv.push(*(cfg[:additionalEnv]))
end
if $runCommandOptions[:serial]
# Add this to the list of tests to be run on their own, so
# that we can treat them specially when scheduling, but keep
# it in the $runlist for code that dosn't care about
# scheduling.
$serialPlans.add(plan)
end
if $numChildProcesses > 1 and $runCommandOptions[:isSlow]
$runlist.unshift plan
else
$runlist << plan
end
end
def addRunCommand(kind, command, outputHandler, errorHandler, *additionalEnv)
cfg = {
:kind => kind,
:command => command,
:outputHandler => outputHandler,
:errorHandler => errorHandler,
:additionalEnv => additionalEnv,
}
addRunCommandCfg(cfg)
end
# Returns true if there were run commands found in the file ($benchmarkDirectory +
# $benchmark), in which case those run commands have already been executed. Otherwise
# returns false, in which case you're supposed to add your own run commands.
def parseRunCommands
oldDidAddRunCommand = $didAddRunCommand
$didAddRunCommand = false
$skipped = false
Dir.chdir($outputDir) {
File.open($benchmarkDirectory + $benchmark) {
| inp |
inp.each_line {
| line |
begin
doesMatch = line =~ /^\/\/@/
rescue Exception => e
# Apparently this happens in the case of some UTF8 stuff in some files, where
# Ruby tries to be strict and throw exceptions.
next
end
next unless doesMatch
eval $~.post_match
if $skipped
break
end
}
}
}
result = $didAddRunCommand
$didAddRunCommand = result or oldDidAddRunCommand
result
end
def slow!
$runCommandOptions[:isSlow] = true
skip() if ($mode == "quick")
end
def crashOK!
$testSpecificRequiredOptions += ["-s"]
$runCommandOptions[:crashOK] = true
end
def serial!
$runCommandOptions[:serial] = true
end
# Retry parameters for tests that we treat as flaky, either because
# they've been explicitly marked so (via flaky!) or because we were
# asked to --treat-failing-as-flaky.
class RetryParameters
attr_reader :passPercentage, :maxTries
def initialize(passPercentage, maxTries)
@passPercentage = passPercentage
@maxTries = maxTries
end
def to_s
"RetryParameters(#{@passPercentage}, #{@maxTries})"
end
def result(statuses)
if statuses.length > @maxTries
# This could happen if (because of remotes disappearing
# and reappearing) there are multiple runs for the last
# try for a flaky test. Just ignore any extra statuses.
statuses = statuses.take(@maxTries)
end
successes = successfulStatuses(statuses)
remaining = @maxTries - statuses.length
requiredSuccesses = (@passPercentage * @maxTries).ceil
ret = nil # "has not completed yet"
if successes >= requiredSuccesses
ret = true
elsif (successes + remaining) < requiredSuccesses
ret = false
end
putd("#{self}.result(#{statuses}) => #{ret}")
ret
end
private
def successfulStatuses(statuses)
statuses.count {
|status|
status == STATUS_FILE_PASS
}
end
end
def flaky!(passPercentage, maxTries)
$runCommandOptions[:flaky] = RetryParameters.new(passPercentage, maxTries)
end
def requireOptions(*options)
$testSpecificRequiredOptions += options
end
def runWithOptions(cfg, *options)
baseOptions = BASE_OPTIONS
if cfg.has_key?(:no_base_options)
baseOptions = []
end
commandPrefix = cfg.fetch(:command_prefix, [])
if cfg.has_key?(:place_benchmark_early)
cfg[:command] = commandPrefix + vmCommand + [$benchmark.to_s] + baseOptions + options + $testSpecificRequiredOptions
else
cfg[:command] = commandPrefix + vmCommand + baseOptions + options + $testSpecificRequiredOptions + [$benchmark.to_s]
end
addRunCommandCfg(cfg)
end
def runWithOutputHandler(kind, outputHandler, *options)
cfg = {
:kind => kind,
:outputHandler => outputHandler,
:errorHandler => simpleErrorHandler,
}
runWithOptions(cfg, *options)
end
def runWithOutputHandlerWithoutBaseOption(kind, outputHandler, *options)
cfg = {
:kind => kind,
:outputHandler => outputHandler,
:errorHandler => simpleErrorHandler,
:no_base_options => true,
}
runWithOptions(cfg, *options)
end
def run(kind, *options)
runWithOutputHandler(kind, silentOutputHandler, *options)
end
def runInner(cfg, *options)
cfg = cfg.dup
if not cfg.has_key?(:outputHandler)
cfg[:outputHandler] = silentOutputHandler
end
if not cfg.has_key?(:errorHandler)
cfg[:errorHandler] = simpleErrorHandler
end
runWithOptions(cfg, *options)
end
def runWithoutBaseOptionCfg(cfg, *options)
cfg = cfg.dup
cfg[:no_base_options] = true
runWithOptions(cfg, *options)
end
def runWithoutBaseOption(kind, *options)
runWithOutputHandlerWithoutBaseOption(kind, silentOutputHandler, *options)
end
def runOneLargeHeap(*optionalTestSpecificOptions)
if $memoryLimited
$didAddRunCommand = true
puts "Skipping #{$collectionName}/#{$benchmark}"
else
run("default", *optionalTestSpecificOptions)
end
end
def bytecodeCacheTemplate
if ($hostOS == "darwin")
return "bytecode-cache"
elsif ($hostOS == "linux" && $architecture != "mips")
# FIXME: need to fix https://bugs.webkit.org/show_bug.cgi?id=218703 to enable this on Linux/MIPS.
return "bytecode-cacheXXXXXX"
end
nil
end
def runBytecodeCacheImpl(optionalTestSpecificOptions, *additionalEnv)
fileTemplate = bytecodeCacheTemplate
if fileTemplate.nil?
return nil
end
{
:cfg => {
:command_prefix => [
"sh",
(pathToHelpers + "bytecode-cache-test-helper.sh").to_s,
fileTemplate.to_s,
],
:place_benchmark_early => true,
:additionalEnv => additionalEnv,
},
:testSpecificOptions => FTL_OPTIONS + optionalTestSpecificOptions,
}
end
def cfgInitializerPlain
Proc.new { |cfg, kind|
{ :kind => kind}
}
end
def cfgInitializerCfg
Proc.new { |cfg, kind|
cfg = cfg.dup
cfg[:kind] = kind
cfg
}
end
# For each base mode (defined below) we generate two kinds of functions:
#
# - a version which takes a cfg argument and passes it along, only
# setting the kind field
# - a "plain" version which starts out with an empty cfg
#
# The plain version is intended for use in the testcase definitions
# (in `//@` comments and the like).
#
# The former version is used for plumbing. The caller may set various
# fields in the cfg which will be respected.
#
# This way, we can
# - define a set of test modes in defaultRunCfg
# - have defaultRunCfg propagate the cfg argument to the run*Cfg
# functions it calls
# - call defaultRunCfg from e.g. defaultRunNoisyTest with the output
# handlers appropriately set, in order to make sure we're running
# the exact same of tests.
CfgKind = Struct.new(:extension, :expectCfg, :initializer)
cfgKinds = [
CfgKind.new("", false, cfgInitializerPlain),
CfgKind.new("Cfg", true, cfgInitializerCfg),
]
# Define base test modes. Each mode is an array of [name, kind,
# options]. The name is used to derive the ruby method names, the kind
# is used for reporting (i.e. what you'd see in this script's
# output). In the common case, options is a static array; if not, it's
# a Proc that returns a dict that needs to be unpacked (see its use
# site for a more detailed description).
BASE_MODES = [
[
"NoCJIT",
"ftl-no-cjit",
[
"--validateBytecode=true", "--validateGraphAtEachPhase=true"
] +
FTL_OPTIONS +
NO_CJIT_OPTIONS +
COLLECT_CONTINUOUSLY_OPTIONS
],
[
"FTLNoCJIT",
"misc-ftl-no-cjit",
[
"--useDataIC=true",
] +
FTL_OPTIONS +
NO_CJIT_OPTIONS
],
[
"FTLNoCJITB3O0",
"ftl-no-cjit-b3o0",
[
"--useArrayAllocationProfiling=false",
"--forcePolyProto=true",
"--useRandomizingExecutableIslandAllocation=true",
] +
FTL_OPTIONS +
NO_CJIT_OPTIONS +
B3O0_OPTIONS +
FORCE_LLINT_EXIT_OPTIONS
],
[
"FTLNoCJITValidate",
"ftl-no-cjit-validate-sampling-profiler",
[
"--validateGraph=true",
"--validateBCE=true",
"--useSamplingProfiler=true",
"--airForceIRCAllocator=true",
"--useDataIC=true",
] +
FTL_OPTIONS +
NO_CJIT_OPTIONS
],
[
"FTLNoCJITNoPutStackValidate",
"ftl-no-cjit-no-put-stack-validate",
[
"--validateGraph=true",
"--usePutStackSinking=false",
"--airForceIRCAllocator=true",
] +
FTL_OPTIONS +
NO_CJIT_OPTIONS
],
[
"FTLNoCJITNoInlineValidate",
"ftl-no-cjit-no-inline-validate",
[
"--validateGraph=true",
"--maximumInliningDepth=1",
"--airForceBriggsAllocator=true",
"--useB3HoistLoopInvariantValues=true",
] +
FTL_OPTIONS +
NO_CJIT_OPTIONS
],
[
"FTLNoCJITOSRValidation",
"ftl-no-cjit-osr-validation",
[
"--validateFTLOSRExitLiveness=true",
] +
FTL_OPTIONS +
NO_CJIT_OPTIONS
],
[
"DFGEager",
"dfg-eager",
EAGER_OPTIONS +
COLLECT_CONTINUOUSLY_OPTIONS +
FORCE_LLINT_EXIT_OPTIONS
],
[
"DFGEagerNoCJITValidate",
"dfg-eager-no-cjit-validate",
[
"--validateGraph=true",
] +
NO_CJIT_OPTIONS +
EAGER_OPTIONS +
COLLECT_CONTINUOUSLY_OPTIONS
],
[
"FTLEager",
"ftl-eager",
[
"--airForceBriggsAllocator=true",
"--useRandomizingExecutableIslandAllocation=true",
"--forcePolyProto=true",
"--useDataIC=true",
] +
FTL_OPTIONS +
EAGER_OPTIONS +
COLLECT_CONTINUOUSLY_OPTIONS
],
[
"FTLEagerNoCJITValidate",
"ftl-eager-no-cjit",
[
"--validateGraph=true",
"--validateBCE=true",
"--airForceIRCAllocator=true",
] +
FTL_OPTIONS +
NO_CJIT_OPTIONS +
EAGER_OPTIONS +
COLLECT_CONTINUOUSLY_OPTIONS +
FORCE_LLINT_EXIT_OPTIONS +
EXECUTABLE_FUZZER_OPTIONS
],
[
"FTLEagerNoCJITB3O1",
"ftl-eager-no-cjit-b3o1",
[
"--validateGraph=true",
] +
FTL_OPTIONS +
NO_CJIT_OPTIONS +
EAGER_OPTIONS +
B3O1_OPTIONS
],
[
"FTLEagerNoCJITOSRValidation",
"ftl-eager-no-cjit-osr-validation",
[
"--validateFTLOSRExitLiveness=true",
] +
FTL_OPTIONS +
NO_CJIT_OPTIONS +
EAGER_OPTIONS +
COLLECT_CONTINUOUSLY_OPTIONS
],
[
"NoCJITNoASO",
"no-cjit-no-aso",
[
"--useArchitectureSpecificOptimizations=false",
] +
NO_CJIT_OPTIONS
],
[
"NoCJITNoAccessInlining",
"no-cjit-no-access-inlining",
[
"--useAccessInlining=false",
] +
NO_CJIT_OPTIONS
],
[
"FTLNoCJITNoAccessInlining",
"ftl-no-cjit-no-access-inlining",
[
"--useAccessInlining=false",
] +
FTL_OPTIONS +
NO_CJIT_OPTIONS
],
[
"FTLNoCJITSmallPool",
"ftl-no-cjit-small-pool",
[
"--jitMemoryReservationSize=202400",
] +
FTL_OPTIONS +
NO_CJIT_OPTIONS
],
[
"NoCJIT",
"no-cjit",
NO_CJIT_OPTIONS
],
[
"EagerJettisonNoCJIT",
"eager-jettison-no-cjit",
[
"--useRandomizingExecutableIslandAllocation=true",
"--forceCodeBlockToJettisonDueToOldAge=true",
"--verifyGC=true",
] +
NO_CJIT_OPTIONS
],
[
"ShadowChicken",
"shadow-chicken",
[
"--useDFGJIT=false",
"--alwaysUseShadowChicken=true",
]
],
[
"MiniMode",
"mini-mode",
[
"--forceMiniVMMode=true",
]
],
[
"LogicalAssignmentOperatorsEnabled",
"logical-assignment-operators-enabled",
[
"--useLogicalAssignmentOperators=true",
] +
FTL_OPTIONS
],
[
"NoJIT",
"no-jit",
[
"--useJIT=false",
]
],
[
# NOTE: Tests rely on this using scribbleFreeCells.
"NoCJITValidate",
"no-cjit",
[
"--validateBytecode=true",
"--validateGraph=true",
] +
NO_CJIT_OPTIONS
],
[
"NoCJITValidatePhases",
"no-cjit-validate-phases",
[
"--validateBytecode=true",
"--validateGraphAtEachPhase=true",
"--useSourceProviderCache=false",
"--useRandomizingExecutableIslandAllocation=true",
] +
NO_CJIT_OPTIONS
],
[
"NoCJITCollectContinuously",
"no-cjit-collect-continuously",
NO_CJIT_OPTIONS +
COLLECT_CONTINUOUSLY_OPTIONS
],
[
"Default",
"default",
FTL_OPTIONS
],
[
"NoFTL",
"no-ftl",
[]
],
[
"WithRAMSize",
nil, # Not used
Proc.new { |size, *optionalTestSpecificOptions|
{
:cfg => {
:kind => "ram-size-#{size}",
},
:testSpecificOptions => [
"--forceRAMSize=#{size}",
] + optionalTestSpecificOptions
}
}
],
[
"BytecodeCache",
"bytecode-cache",
Proc.new { |*optionalTestSpecificOptions|
runBytecodeCacheImpl(optionalTestSpecificOptions)
}
],
[
"BytecodeCacheNoAssertion",
"bytecode-cache",
Proc.new { |*optionalTestSpecificOptions|
runBytecodeCacheImpl(optionalTestSpecificOptions, "JSC_forceDiskCache=false")
}
],
[
"FTLEagerWatchdog",
nil,
Proc.new { |*optionalTestSpecificOptions|
timeout = rand(100)
{
:cfg => {
:kind => "ftl-eager-watchdog-#{timeout}",
},
:testSpecificOptions => [
"--watchdog=#{timeout}",
"--watchdog-exception-ok",
] +
FTL_OPTIONS +
EAGER_OPTIONS +
COLLECT_CONTINUOUSLY_OPTIONS +
optionalTestSpecificOptions
}
}
],
[
"NoLLInt",
"no-llint",
Proc.new { |*optionalTestSpecificOptions|
if $jitTests
{
:cfg => {
},
:testSpecificOptions => [
"--useLLInt=false",
] + optionalTestSpecificOptions
}
else
nil
end
}
],
[
"OneLangeHeap",
"default",
Proc.new { |*optionalTestSpecificOptions|
if $memoryLimited
nil
else
{
:testSpecificOptions => optionalTestSpecificOptions
}
end
}
]
]
BASE_MODES.each { |mode|
name = "run#{mode[0]}"
kind = mode[1]
options = mode[2]
# We need to define two variants, one expecting a cfg as the first
# argument, one not.
cfgKinds.each { |cfgKind|
methodName = "#{name}#{cfgKind.extension}".to_sym
define_method(methodName) { |*args|
cfg = nil
if cfgKind.expectCfg
# If we're defining a method that expects a cfg
# argument, pick it out of the args to pass to the
# initializer.
cfg = args.shift
end
# The cfg is initialized differently depending on whether
# we're in a run*Cfg method or not.
cfg = cfgKind.initializer.call(cfg, kind)
finalOptions = nil
if options.respond_to?(:call)
dynamicOptions = options.call(*args)
if dynamicOptions.nil?
skip
return
end
# The Proc object may override any cfg option passed
# in. This is used e.g. for dynamic test names as used
# by WithRAMSize and FTLEagerWatchdog.
cfg.merge!(dynamicOptions[:cfg])
# As the Proc may consume arguments, it's responsible
# for returning the final option list. Needed e.g. by
# WithRAMSize.
finalOptions = dynamicOptions[:testSpecificOptions]
else
finalOptions = options + args
end
runInner(cfg, *finalOptions)
}
}
}
CFG_NOISY = {
:outputHandler => noisyOutputHandler,
:errorHandler => noisyErrorHandler,
}.freeze
BASE_MODES.each { |mode|
name = "runNoisyTest#{mode[0]}".to_sym
define_method(name) { |*args|
# For each base mode, define the "noisy" variant which simply
# calls the respective run#{name}Cfg, passing in the "noisy"
# cfg.
send("run#{mode[0]}Cfg", CFG_NOISY, "--validateBytecode=true", "--validateGraphAtEachPhase=true", *args)
}
}
# Default set of tests to run; propagates the cfg to every callee.
def defaultRunCfg(cfg, subsetOptions, *optionalTestSpecificOptions)
cfg.freeze
if not subsetOptions.has_key?(:ignoreQuickMode) and $mode == "quick"
defaultQuickRunCfg(cfg, *optionalTestSpecificOptions)
else
runDefaultCfg(cfg, *optionalTestSpecificOptions)
runBytecodeCacheCfg(cfg, *optionalTestSpecificOptions)
runMiniModeCfg(cfg, *optionalTestSpecificOptions)
if $jitTests
if not subsetOptions.has_key?(:skipNoLLInt)
runNoLLIntCfg(cfg, *optionalTestSpecificOptions)
end
runNoCJITValidatePhasesCfg(cfg, *optionalTestSpecificOptions)
runNoCJITCollectContinuouslyCfg(cfg, *optionalTestSpecificOptions) if shouldCollectContinuously?
if not subsetOptions.has_key?(:skipEager)
runDFGEagerCfg(cfg)
if $mode != "basic"
runDFGEagerNoCJITValidateCfg(cfg, *optionalTestSpecificOptions)
runEagerJettisonNoCJITCfg(cfg, *optionalTestSpecificOptions)
end
end
return if !$isFTLPlatform
runNoFTLCfg(cfg, *optionalTestSpecificOptions)
if not subsetOptions.has_key?(:skipEager)
runFTLEagerCfg(cfg, *optionalTestSpecificOptions)
runFTLEagerNoCJITValidateCfg(cfg, *optionalTestSpecificOptions) if $buildType == "release"
end
runFTLNoCJITSmallPoolCfg(cfg, *optionalTestSpecificOptions)
return if $mode == "basic"
runFTLNoCJITValidateCfg(cfg, *optionalTestSpecificOptions)
runFTLNoCJITB3O0Cfg(cfg, *optionalTestSpecificOptions)
runFTLNoCJITNoPutStackValidateCfg(cfg, *optionalTestSpecificOptions)
runFTLNoCJITNoInlineValidateCfg(cfg, *optionalTestSpecificOptions)
if not subsetOptions.has_key?(:skipEager)
runFTLEagerNoCJITB3O1Cfg(cfg, *optionalTestSpecificOptions)
end
end
end
end
def defaultRun
defaultRunCfg({}, {})
end
def defaultNoNoLLIntRun
defaultRunCfg({}, {:skipNoLLInt => true})
end
def defaultQuickRunCfg(cfg, *optionalTestSpecificOptions)
runDefaultCfg(cfg, *optionalTestSpecificOptions)
if $jitTests
runNoCJITValidateCfg(cfg, *optionalTestSpecificOptions)
return if !$isFTLPlatform
runNoFTLCfg(cfg, *optionalTestSpecificOptions)
runFTLNoCJITValidateCfg(cfg, *optionalTestSpecificOptions)
end
end
def defaultQuickRun
defaultQuickRunCfg({})
end
def defaultSpotCheckNoMaximalFlush
defaultQuickRun
runNoCJITNoAccessInlining
return if !$isFTLPlatform
runFTLNoCJITOSRValidation
runFTLNoCJITNoAccessInlining
runFTLNoCJITB3O0
end
def defaultSpotCheck
defaultSpotCheckNoMaximalFlush
runEagerJettisonNoCJIT
end
# This is expected to not do eager runs because eager runs can have a lot of recompilations
# for reasons that don't arise in the real world. It's used for tests that assert convergence
# by counting recompilations.
def defaultNoEagerRun(*optionalTestSpecificOptions)
defaultRunCfg({}, { :skipEager => true }, *optionalTestSpecificOptions)
end
def defaultNoSamplingProfilerRun
defaultRunCfg({}, { :ignoreQuickMode => true })
end
def runProfiler
if $remote or $memoryLimited or ($hostOS == "windows") or ($hostOS == "playstation")
skip
return
end
profilerOutput = uniqueFilename(".json")
if $canRunDisplayProfilerOutput
addRunCommand("profiler", ["ruby", (pathToHelpers + "profiler-test-helper").to_s, (SCRIPTS_PATH + "display-profiler-output").to_s, profilerOutput.to_s, *vmCommand, "--useConcurrentJIT=false", "-p", profilerOutput.to_s, $benchmark.to_s], silentOutputHandler, simpleErrorHandler)
else
puts "Running simple version of #{$collectionName}/#{$benchmark} because some required Ruby features are unavailable."
run("profiler-simple", "--useConcurrentJIT=false", "-p", profilerOutput.to_s)
end
end
def runExceptionFuzz
subCommand = escapeAll(vmCommand + ["--useDollarVM=true", "--useExceptionFuzz=true", $benchmark.to_s])
addRunCommand("exception-fuzz", ["perl", (pathToHelpers + "js-exception-fuzz").to_s, subCommand], silentOutputHandler, simpleErrorHandler)
end
def runExecutableAllocationFuzz(name, *options)
subCommand = escapeAll(vmCommand + ["--useDollarVM=true", $benchmark.to_s] + options)
addRunCommand("executable-allocation-fuzz-" + name, ["perl", (pathToHelpers + "js-executable-allocation-fuzz").to_s, subCommand], silentOutputHandler, simpleErrorHandler)
end
def runTypeProfiler
if !$jitTests
return
end
run("ftl-type-profiler", "--useTypeProfiler=true", *(FTL_OPTIONS))
run("ftl-no-cjit-type-profiler-force-poly-proto", "--useTypeProfiler=true", "--forcePolyProto=true", *(FTL_OPTIONS + NO_CJIT_OPTIONS))
return if !$isFTLPlatform
run("ftl-type-profiler-ftl-eager", "--useTypeProfiler=true", *(FTL_OPTIONS + EAGER_OPTIONS))
end
def runControlFlowProfiler
if !$jitTests
return
end
return if !$isFTLPlatform
run("ftl-no-cjit-type-profiler", "--useControlFlowProfiler=true", *(FTL_OPTIONS + NO_CJIT_OPTIONS))
end
def runTest262(mode, exception, includeFiles, flags)
failsWithException = exception != "NoException"
isStrict = false
isModule = false
isAsync = false
flags.each {
| flag |
case flag
when :strict
isStrict = true
when :module
isModule = true
when :async
isAsync = true
else
raise "Invalid flag for runTest262, #{flag}"
end
}
prepareExtraRelativeFiles(includeFiles.map { |f| "../" + f }, $collection)
args = vmCommand + BASE_OPTIONS
args << "--exception=" + exception if failsWithException
args << "--test262-async" if isAsync
args += $testSpecificRequiredOptions
args += includeFiles
case mode
when :normal
errorHandler = simpleErrorHandler
outputHandler = silentOutputHandler
when :fail
errorHandler = expectedFailErrorHandler
outputHandler = noisyOutputHandler
when :failDueToOutdatedOrBadTest
errorHandler = expectedFailErrorHandler
outputHandler = noisyOutputHandler
when :skip
return
else
raise "Invalid mode: #{mode}"
end
if isStrict
kind = "default-strict"
args << "--strict-file=#{$benchmark}"
else
kind = "default"
if isModule
args << "--module-file=#{$benchmark}"
else
args << $benchmark.to_s
end
end
addRunCommand(kind, args, outputHandler, errorHandler)
end
def prepareTest262Fixture
# This function is used to add the files used by Test262 modules tests.
prepareExtraRelativeFiles([""], $collection)
end
def runES6(mode)
args = vmCommand + BASE_OPTIONS + $testSpecificRequiredOptions + [$benchmark.to_s]
case mode
when :normal
errorHandler = simpleErrorHandler
when :fail
errorHandler = expectedFailErrorHandler
when :failDueToOutdatedOrBadTest
errorHandler = expectedFailErrorHandler
when :skip
return
else
raise "Invalid mode: #{mode}"
end
addRunCommand("default", args, noisyOutputHandler, errorHandler)
end
def defaultRunModules(noLLInt: true)
run("default-modules", "-m")
if !$jitTests
return
end
run("no-llint-modules", "-m", "--useLLInt=false") if noLLInt
run("no-cjit-validate-phases-modules", "-m", "--validateBytecode=true", "--validateGraphAtEachPhase=true", *NO_CJIT_OPTIONS)
run("dfg-eager-modules", "-m", *EAGER_OPTIONS)
run("dfg-eager-no-cjit-validate-modules", "-m", "--validateGraph=true", *(NO_CJIT_OPTIONS + EAGER_OPTIONS))
return if !$isFTLPlatform
run("default-ftl-modules", "-m", *FTL_OPTIONS)
run("ftl-no-cjit-validate-modules", "-m", "--validateGraph=true", *(FTL_OPTIONS + NO_CJIT_OPTIONS))
run("ftl-no-cjit-no-inline-validate-modules", "-m", "--validateGraph=true", "--maximumInliningDepth=1", *(FTL_OPTIONS + NO_CJIT_OPTIONS))
run("ftl-eager-modules", "-m", *(FTL_OPTIONS + EAGER_OPTIONS))
run("ftl-eager-no-cjit-modules", "-m", "--validateGraph=true", *(FTL_OPTIONS + NO_CJIT_OPTIONS + EAGER_OPTIONS))
run("ftl-no-cjit-small-pool-modules", "-m", "--jitMemoryReservationSize=202400", *(FTL_OPTIONS + NO_CJIT_OPTIONS))
end
def noNoLLIntRunModules
defaultRunModules(noLLInt: false)
end
def runWebAssembly
return if !$jitTests
return if !$isFTLPlatform
run("default-wasm", "-m", *FTL_OPTIONS)
if $mode != "quick"
run("wasm-no-cjit-yes-tls-context", "-m", "--useFastTLSForWasmContext=true", *(FTL_OPTIONS + NO_CJIT_OPTIONS))
run("wasm-eager", "-m", "--useRandomizingExecutableIslandAllocation=true", *(FTL_OPTIONS + EAGER_OPTIONS))
run("wasm-eager-jettison", "-m", "--forceCodeBlockToJettisonDueToOldAge=true", "--useRandomizingExecutableIslandAllocation=true", "--verifyGC=true", *FTL_OPTIONS)
run("wasm-no-tls-context", "-m", "--useFastTLSForWasmContext=false", *FTL_OPTIONS)
run("wasm-slow-memory", "-m", "--useWebAssemblyFastMemory=false", *FTL_OPTIONS)
run("wasm-b3", "-m", "--useWasmLLInt=false", "--wasmBBQUsesAir=false", *FTL_OPTIONS)
run("wasm-air", "-m", "--useWasmLLInt=false", "--useRandomizingExecutableIslandAllocation=true", *FTL_OPTIONS)
run("wasm-collect-continuously", "-m", "--collectContinuously=true", "--verifyGC=true", *FTL_OPTIONS) if shouldCollectContinuously?
end
end
def runWebAssemblyJetStream2
return if !$jitTests
return if !$isFTLPlatform
if $memoryLimited
skip
return
end
prepareExtraAbsoluteFiles(JETSTREAM2_PATH, ["JetStreamDriver.js"])
prepareExtraRelativeFilesWithBaseDirectory(Dir[JETSTREAM2_PATH + "wasm" + "*.js"].map { |f| "wasm/" + File.basename(f) }, $collection.dirname, $extraFilesBaseDir.dirname)
prepareExtraRelativeFilesWithBaseDirectory(Dir[JETSTREAM2_PATH + "wasm" + "*.wasm"].map { |f| "wasm/" + File.basename(f) }, $collection.dirname, $extraFilesBaseDir.dirname)
run("default-wasm", *FTL_OPTIONS)
if $mode != "quick"
run("wasm-no-cjit-yes-tls-context", "--useFastTLSForWasmContext=true", *(FTL_OPTIONS + NO_CJIT_OPTIONS))
run("wasm-eager", "--useRandomizingExecutableIslandAllocation=true", *(FTL_OPTIONS + EAGER_OPTIONS))
run("wasm-eager-jettison", "--forceCodeBlockToJettisonDueToOldAge=true", "--verifyGC=true", *FTL_OPTIONS)
run("wasm-no-tls-context", "--useFastTLSForWasmContext=false", *FTL_OPTIONS)
run("wasm-slow-memory", "--useWebAssemblyFastMemory=false", *FTL_OPTIONS)
run("wasm-b3", "--useWasmLLInt=false", "--wasmBBQUsesAir=false", *FTL_OPTIONS)
run("wasm-air", "--useWasmLLInt=false", "--useRandomizingExecutableIslandAllocation=true", *FTL_OPTIONS)
run("wasm-collect-continuously", "--collectContinuously=true", "--verifyGC=true", *FTL_OPTIONS) if shouldCollectContinuously?
end
end
def runWebAssemblySuite(*optionalTestSpecificOptions)
return if !$jitTests
return if !$isFTLPlatform
modules = Dir[WASMTESTS_PATH + "*.js"].map { |f| File.basename(f) }
prepareExtraAbsoluteFiles(WASMTESTS_PATH, ["wasm.json"])
prepareExtraRelativeFiles(modules.map { |f| "../" + f }, $collection)
if optionalTestSpecificOptions[0] == :no_module
optionalTestSpecificOptions.shift
else
optionalTestSpecificOptions.unshift "-m"
end
run("default-wasm", *(FTL_OPTIONS + optionalTestSpecificOptions))
if $mode != "quick"
run("wasm-no-cjit-yes-tls-context", "--useFastTLSForWasmContext=true", *(FTL_OPTIONS + NO_CJIT_OPTIONS + optionalTestSpecificOptions))
run("wasm-eager", *(FTL_OPTIONS + EAGER_OPTIONS + optionalTestSpecificOptions))
run("wasm-eager-jettison", "--forceCodeBlockToJettisonDueToOldAge=true", "--useRandomizingExecutableIslandAllocation=true", "--verifyGC=true", *(FTL_OPTIONS + optionalTestSpecificOptions))
run("wasm-no-tls-context", "--useFastTLSForWasmContext=false", *(FTL_OPTIONS + optionalTestSpecificOptions))
run("wasm-slow-memory", "--useWebAssemblyFastMemory=false", *(FTL_OPTIONS + optionalTestSpecificOptions))
run("wasm-b3", "--useWasmLLInt=false", "--wasmBBQUsesAir=false", *(FTL_OPTIONS + optionalTestSpecificOptions))
run("wasm-air", "--useWasmLLInt=false", "--useRandomizingExecutableIslandAllocation=true", *(FTL_OPTIONS + optionalTestSpecificOptions))
run("wasm-collect-continuously", "--collectContinuously=true", "--verifyGC=true", *(FTL_OPTIONS + optionalTestSpecificOptions)) if shouldCollectContinuously?
end
end
def runHarnessTest(kind, *options)
wasmFiles = allWasmFiles($collection)
wasmFiles.each {
| file |
basename = file.basename.to_s
addRunCommand("(" + basename + ")-" + kind, vmCommand + options + $testSpecificRequiredOptions + [$benchmark.to_s, "--", basename], silentOutputHandler, simpleErrorHandler)
}
end
def runWebAssemblyWithHarness(*optionalTestSpecificOptions)
raise unless $benchmark.to_s =~ /harness\.m?js/
return if !$jitTests
return if !$isFTLPlatform
wasmFiles = allWasmFiles($collection)
prepareExtraRelativeFiles(wasmFiles.map { |f| f.basename }, $collection)
runHarnessTest("default-wasm", *(FTL_OPTIONS + optionalTestSpecificOptions))
if $mode != "quick"
runHarnessTest("wasm-no-cjit-yes-tls-context", "--useFastTLSForWasmContext=true", *(FTL_OPTIONS + NO_CJIT_OPTIONS + optionalTestSpecificOptions))
runHarnessTest("wasm-eager", *(FTL_OPTIONS + EAGER_OPTIONS + optionalTestSpecificOptions))
runHarnessTest("wasm-eager-jettison", "--forceCodeBlockToJettisonDueToOldAge=true", "--useRandomizingExecutableIslandAllocation=true", "--verifyGC=true", *(FTL_OPTIONS + optionalTestSpecificOptions))
runHarnessTest("wasm-no-tls-context", "--useFastTLSForWasmContext=false", *(FTL_OPTIONS + optionalTestSpecificOptions))
runHarnessTest("wasm-slow-memory", "--useWebAssemblyFastMemory=false", *(FTL_OPTIONS + optionalTestSpecificOptions))
runHarnessTest("wasm-b3", "--useWasmLLInt=false", "--wasmBBQUsesAir=false", *(FTL_OPTIONS + optionalTestSpecificOptions))
runHarnessTest("wasm-no-air", "--useWasmLLInt=false", "--useRandomizingExecutableIslandAllocation=true", *(FTL_OPTIONS + optionalTestSpecificOptions))
runHarnessTest("wasm-collect-continuously", "--collectContinuously=true", "--verifyGC=true", *(FTL_OPTIONS + optionalTestSpecificOptions)) if shouldCollectContinuously?
end
end
def runWebAssemblyEmscripten(mode)
case mode
when :skip
return
end
return if !$jitTests
return if !$isFTLPlatform
wasm = $benchmark.to_s.sub! '.js', '.wasm'
prepareExtraRelativeFiles([Pathname('..') + wasm], $collection)
run("default-wasm", *FTL_OPTIONS)
if $mode != "quick"
run("wasm-no-cjit-yes-tls-context", "--useFastTLSForWasmContext=true", *(FTL_OPTIONS + NO_CJIT_OPTIONS))
run("wasm-eager-jettison", "--forceCodeBlockToJettisonDueToOldAge=true", "--useRandomizingExecutableIslandAllocation=true", "--verifyGC=true", *FTL_OPTIONS)
run("wasm-no-tls-context", "--useFastTLSForWasmContext=false", *FTL_OPTIONS)
run("wasm-b3", "--useWasmLLInt=false", "--wasmBBQUsesAir=false", *FTL_OPTIONS)
run("wasm-air", "--useWasmLLInt=false", "--useRandomizingExecutableIslandAllocation=true", *FTL_OPTIONS)
run("wasm-collect-continuously", "--collectContinuously=true", "--verifyGC=true", *FTL_OPTIONS) if shouldCollectContinuously?
end
end
def runWebAssemblySpecTestBase(mode, specHarnessPath, *optionalTestSpecificOptions)
case mode
when :skip
return
end
return if !$jitTests
return if !$isFTLPlatform
prepareExtraAbsoluteFiles(WASMTESTS_PATH, ["wasm.json"])
modules = Dir[WASMTESTS_PATH + "*.js"].map { |f| File.basename(f) }
prepareExtraRelativeFiles(modules.map { |f| "../../" + f }, $collection)
harness = Dir[WASMTESTS_PATH + (specHarnessPath + "/") + "*.js"].map { |f| File.basename(f) }
prepareExtraRelativeFiles(harness.map { |f| ("../../" + specHarnessPath + "/") + f }, $collection)
specHarnessJsPath = "../" + specHarnessPath + ".js"
runWithOutputHandler("default-wasm", noisyOutputHandler, specHarnessJsPath, *(FTL_OPTIONS + optionalTestSpecificOptions))
if $mode != "quick"
runWithOutputHandler("wasm-no-cjit-yes-tls-context", noisyOutputHandler, specHarnessJsPath, "--useFastTLSForWasmContext=true", *(FTL_OPTIONS + NO_CJIT_OPTIONS + optionalTestSpecificOptions))
runWithOutputHandler("wasm-eager-jettison", noisyOutputHandler, specHarnessJsPath, "--forceCodeBlockToJettisonDueToOldAge=true", "--useRandomizingExecutableIslandAllocation=true", "--verifyGC=true", *(FTL_OPTIONS + optionalTestSpecificOptions))
runWithOutputHandler("wasm-no-tls-context", noisyOutputHandler, specHarnessJsPath, "--useFastTLSForWasmContext=false", *(FTL_OPTIONS + optionalTestSpecificOptions))
runWithOutputHandler("wasm-b3", noisyOutputHandler, specHarnessJsPath, "--useWasmLLInt=false", "--wasmBBQUsesAir=false", *(FTL_OPTIONS + optionalTestSpecificOptions))
runWithOutputHandler("wasm-air", noisyOutputHandler, specHarnessJsPath, "--useWasmLLInt=false", "--useRandomizingExecutableIslandAllocation=true", *(FTL_OPTIONS + optionalTestSpecificOptions))
runWithOutputHandler("wasm-collect-continuously", noisyOutputHandler, specHarnessJsPath, "--collectContinuously=true", "--verifyGC=true", *(FTL_OPTIONS + optionalTestSpecificOptions)) if shouldCollectContinuously?
end
end
def runWebAssemblySpecTest(mode)
runWebAssemblySpecTestBase(mode, "spec-harness")
end
def runWebAssemblyReferenceSpecTest(mode)
runWebAssemblySpecTestBase(mode, "ref-spec-harness")
end
def runWebAssemblyFunctionReferenceSpecTest(mode)
runWebAssemblySpecTestBase(mode, "spec-harness", "--useWebAssemblyTypedFunctionReferences=true")
end
def runWebAssemblyLowExecutableMemory(*optionalTestSpecificOptions)
return if !$jitTests
return if !$isFTLPlatform
modules = Dir[WASMTESTS_PATH + "*.js"].map { |f| File.basename(f) }
prepareExtraAbsoluteFiles(WASMTESTS_PATH, ["wasm.json"])
prepareExtraRelativeFiles(modules.map { |f| "../" + f }, $collection)
# Only let WebAssembly get executable memory.
run("default-wasm", "--useConcurrentGC=0" , "--useConcurrentJIT=0", "--jitMemoryReservationSize=20000", "--useBaselineJIT=0", "--useDFGJIT=0", "--useFTLJIT=0", "-m")
end
def runChakra(mode, exception, baselineFile, extraFiles)
raise unless $benchmark.to_s =~ /\.js$/
failsWithException = exception != "NoException"
testName = $~.pre_match
prepareExtraAbsoluteFiles(CHAKRATESTS_PATH, ["jsc-lib.js"])
prepareExtraRelativeFiles(extraFiles.map { |f| "../" + f }, $collection)
args = vmCommand + BASE_OPTIONS
args += FTL_OPTIONS if $isFTLPlatform
args += EAGER_OPTIONS
args << "--exception=" + exception if failsWithException
args << "--dumpException" if failsWithException
args += $testSpecificRequiredOptions
args += ["jsc-lib.js"]
case mode
when :baseline
prepareExtraRelativeFiles([(Pathname("..") + baselineFile).to_s], $collection)
errorHandler = diffErrorHandler(($benchmarkDirectory + baselineFile).to_s)
outputHandler = noisyOutputHandler
when :pass
errorHandler = chakraPassFailErrorHandler
outputHandler = noisyOutputHandler
when :skipDueToOutdatedOrBadTest
return
when :skip
return
else
raise "Invalid mode: #{mode}"
end
kind = "default"
args << $benchmark.to_s
addRunCommand(kind, args, outputHandler, errorHandler)
end
def runLayoutTest(kind, *options)
raise unless $benchmark.to_s =~ /\.js$/
testName = $~.pre_match
if kind
kind = "layout-" + kind
else
kind = "layout"
end
prepareExtraRelativeFiles(["../#{testName}-expected.txt"], $benchmarkDirectory)
prepareExtraAbsoluteFiles(LAYOUTTESTS_PATH, ["resources/standalone-pre.js", "resources/standalone-post.js"])
args = vmCommand + BASE_OPTIONS + options + $testSpecificRequiredOptions +
[(Pathname.new("resources") + "standalone-pre.js").to_s,
$benchmark.to_s,
(Pathname.new("resources") + "standalone-post.js").to_s]
addRunCommand(kind, args, noisyOutputHandler, diffErrorHandler(($benchmarkDirectory + "../#{testName}-expected.txt").to_s))
end
def runLayoutTestNoFTL
runLayoutTest("no-ftl")
end
def runLayoutTestNoLLInt
runLayoutTest("no-llint", "--useLLInt=false")
end
def runLayoutTestNoCJIT
runLayoutTest("no-cjit", *NO_CJIT_OPTIONS)
end
def runLayoutTestDFGEagerNoCJIT
runLayoutTest("dfg-eager-no-cjit", *(NO_CJIT_OPTIONS + EAGER_OPTIONS))
end
def runLayoutTestDefault
runLayoutTest(nil, "--testTheFTL=true", *FTL_OPTIONS)
end
def runLayoutTestFTLNoCJIT
runLayoutTest("ftl-no-cjit", "--testTheFTL=true", *(FTL_OPTIONS + NO_CJIT_OPTIONS))
end
def runLayoutTestFTLEagerNoCJIT
runLayoutTest("ftl-eager-no-cjit", "--testTheFTL=true", *(FTL_OPTIONS + NO_CJIT_OPTIONS + EAGER_OPTIONS))
end
def runLayoutTestFTLEagerNoCJITB3O1
runLayoutTest("ftl-eager-no-cjit-b3o1", "--testTheFTL=true", *(FTL_OPTIONS + NO_CJIT_OPTIONS + EAGER_OPTIONS + B3O1_OPTIONS))
end
def noFTLRunLayoutTest
if !$jitTests
return
end
runLayoutTestNoLLInt
runLayoutTestNoCJIT
runLayoutTestDFGEagerNoCJIT
end
def defaultQuickRunLayoutTest
runLayoutTestDefault
if $jitTests
if $isFTLPlatform
runLayoutTestNoFTL
runLayoutTestFTLNoCJIT
runLayoutTestFTLEagerNoCJIT
else
noFTLRunLayoutTest
end
end
end
def defaultRunLayoutTest
if $mode == "quick"
defaultQuickRunLayoutTest
else
runLayoutTestDefault
if $jitTests
noFTLRunLayoutTest
return if !$isFTLPlatform
runLayoutTestNoFTL
runLayoutTestFTLNoCJIT
runLayoutTestFTLEagerNoCJIT
end
end
end
def noEagerNoNoLLIntTestsRunLayoutTest
runLayoutTestDefault
if $jitTests
runLayoutTestNoCJIT
return if !$isFTLPlatform
runLayoutTestNoFTL
runLayoutTestFTLNoCJIT
end
end
def noNoLLIntRunLayoutTest
runLayoutTestDefault
if $jitTests
runLayoutTestNoCJIT
runLayoutTestDFGEagerNoCJIT
return if !$isFTLPlatform
runLayoutTestNoFTL
runLayoutTestFTLNoCJIT
runLayoutTestFTLEagerNoCJIT
end
end
def prepareExtraRelativeFilesWithBaseDirectory(extraFiles, destination, baseDirectory)
Dir.chdir($outputDir) {
extraFiles.each {
| file |
dest = destination + file
FileUtils.mkdir_p(dest.dirname)
FileUtils.cp baseDirectory + file, dest
}
}
end
def prepareExtraRelativeFiles(extraFiles, destination)
prepareExtraRelativeFilesWithBaseDirectory(extraFiles, destination, $extraFilesBaseDir)
end
def baseDirForCollection(collectionName)
Pathname(".tests") + collectionName
end
def prepareExtraAbsoluteFiles(absoluteBase, extraFiles)
raise unless absoluteBase.absolute?
Dir.chdir($outputDir) {
collectionBaseDir = baseDirForCollection($collectionName)
extraFiles.each {
| file |
destination = collectionBaseDir + file
FileUtils.mkdir_p destination.dirname unless destination.directory?
FileUtils.cp absoluteBase + file, destination
}
}
end
def runComplexTest(before, after, additionalEnv, *options)
prepareExtraRelativeFiles(before.map{|v| (Pathname("..") + v).to_s}, $collection)
prepareExtraRelativeFiles(after.map{|v| (Pathname("..") + v).to_s}, $collection)
args = vmCommand + BASE_OPTIONS + options + $testSpecificRequiredOptions + before.map{|v| v.to_s} + [$benchmark.to_s] + after.map{|v| v.to_s}
addRunCommand("complex", args, noisyOutputHandler, simpleErrorHandler, *additionalEnv)
end
def runMozillaTest(kind, mode, extraFiles, *options)
if kind
kind = "mozilla-" + kind
else
kind = "mozilla"
end
prepareExtraRelativeFiles(extraFiles.map{|v| (Pathname("..") + v).to_s}, $collection)
args = vmCommand + BASE_OPTIONS + options + $testSpecificRequiredOptions + extraFiles.map{|v| v.to_s} + [$benchmark.to_s]
case mode
when :normal
errorHandler = mozillaErrorHandler
when :negative
errorHandler = mozillaExit3ErrorHandler
when :fail
errorHandler = mozillaFailErrorHandler
when :failDueToOutdatedOrBadTest
errorHandler = mozillaFailErrorHandler
when :skip
return
else
raise "Invalid mode: #{mode}"
end
addRunCommand(kind, args, noisyOutputHandler, errorHandler)
end
def runMozillaTestDefault(mode, *extraFiles)
runMozillaTest(nil, mode, extraFiles, *FTL_OPTIONS)
end
def runMozillaTestNoFTL(mode, *extraFiles)
runMozillaTest("no-ftl", mode, extraFiles)
end
def runMozillaTestLLInt(mode, *extraFiles)
runMozillaTest("llint", mode, extraFiles, "--useJIT=false")
end
def runMozillaTestBaselineJIT(mode, *extraFiles)
runMozillaTest("baseline", mode, extraFiles, "--useLLInt=false", "--useDFGJIT=false")
end
def runMozillaTestDFGEagerNoCJITValidatePhases(mode, *extraFiles)
runMozillaTest("dfg-eager-no-cjit-validate-phases", mode, extraFiles, "--validateBytecode=true", "--validateGraphAtEachPhase=true", *(NO_CJIT_OPTIONS + EAGER_OPTIONS))
end
def runMozillaTestFTLEagerNoCJITValidatePhases(mode, *extraFiles)
runMozillaTest("ftl-eager-no-cjit-validate-phases", mode, extraFiles, "--validateBytecode=true", "--validateGraphAtEachPhase=true", *(FTL_OPTIONS + NO_CJIT_OPTIONS + EAGER_OPTIONS))
end
def defaultQuickRunMozillaTest(mode, *extraFiles)
if $jitTests
runMozillaTestDefault(mode, *extraFiles)
runMozillaTestFTLEagerNoCJITValidatePhases(mode, *extraFiles)
else
runMozillaTestNoFTL(mode, *extraFiles)
if $jitTests
runMozillaTestDFGEagerNoCJITValidatePhases(mode, *extraFiles)
end
end
end
def defaultRunMozillaTest(mode, *extraFiles)
if $mode == "quick"
defaultQuickRunMozillaTest(mode, *extraFiles)
else
runMozillaTestNoFTL(mode, *extraFiles)
if $jitTests
runMozillaTestLLInt(mode, *extraFiles)
runMozillaTestBaselineJIT(mode, *extraFiles)
runMozillaTestDFGEagerNoCJITValidatePhases(mode, *extraFiles)
runMozillaTestDefault(mode, *extraFiles)
runMozillaTestFTLEagerNoCJITValidatePhases(mode, *extraFiles) if $isFTLPlatform
end
end
end
def runNoisyTestWithEnv(kind, *additionalEnv)
cfg = CFG_NOISY.dup
cfg[:kind] = kind
cfg[:additionalEnv] = additionalEnv
runDefaultCfg(cfg)
end
def defaultRunNoisyTest
cfg = {
:outputHandler => noisyOutputHandler,
:errorHandler => noisyErrorHandler,
}
defaultRunCfg(cfg, {})
end
def skip
$didAddRunCommand = true
$skipped = true
puts "Skipping #{$collectionName}/#{$benchmark}"
end
def allWasmFiles(path)
if path.file?
[path]
else
result = []
Dir.foreach(path) {
| filename |
next unless filename =~ /\.m?wasm$/
next unless (path + filename).file?
result << path + filename
}
result
end
end
def allJSFiles(path)
if path.file?
[path]
else
result = []
Dir.foreach(path) {
| filename |
next unless filename =~ /\.m?js$/
next unless (path + filename).file?
result << path + filename
}
result
end
end
def uniqueifyName(names, name)
result = name.to_s
toAdd = 1
while names[result]
result = "#{name}-#{toAdd}"
toAdd += 1
end
names[result] = true
result
end
def simplifyCollectionName(collectionPath)
outerDir = collectionPath.dirname
name = collectionPath.basename
lastName = name
if collectionPath.directory?
while lastName.to_s =~ /test/
lastName = outerDir.basename
name = lastName + name
outerDir = outerDir.dirname
end
end
uniqueifyName($collectionNames, name)
end
def prepareCollection(name)
FileUtils.mkdir_p $outputDir + name
absoluteCollection = $collection.realpath
Dir.chdir($outputDir) {
bundleDir = baseDirForCollection(name)
# Create the proper directory structures.
FileUtils.mkdir_p bundleDir
if bundleDir.basename == $collection.basename
FileUtils.cp_r absoluteCollection, bundleDir.dirname
$collection = bundleDir
else
FileUtils.cp_r absoluteCollection, bundleDir
$collection = bundleDir + $collection.basename
end
$extraFilesBaseDir = absoluteCollection
}
end
$collectionNames = {}
def handleCollectionFile(collection)
collectionName = simplifyCollectionName(collection)
paths = {}
subCollections = []
YAML::load(IO::read(collection)).each {
| entry |
if entry["collection"]
subCollections << entry["collection"]
next
end
if Pathname.new(entry["path"]).absolute?
raise "Absolute path: " + entry["path"] + " in #{collection}"
end
if paths[entry["path"]]
raise "Duplicate path: " + entry["path"] + " in #{collection}"
end
subCollection = collection.dirname + entry["path"]
if subCollection.file?
subCollectionName = Pathname.new(entry["path"]).dirname
else
subCollectionName = entry["path"]
end
$collection = subCollection
$collectionName = Pathname.new(collectionName)
Pathname.new(subCollectionName).each_filename {
| filename |
next if filename =~ /^\./
$collectionName += filename
}
$collectionName = $collectionName.to_s
prepareCollection($collectionName)
Dir.chdir($outputDir) {
pathsToSearch = [$collection]
if entry["tests"]
if entry["tests"].is_a? Array
pathsToSearch = entry["tests"].map {
| testName |
pathsToSearch[0] + testName
}
else
pathsToSearch[0] += entry["tests"]
end
end
pathsToSearch.each {
| pathToSearch |
allJSFiles(pathToSearch).each {
| path |
$benchmark = path.basename
$benchmarkDirectory = path.dirname
$runCommandOptions = {}
$testSpecificRequiredOptions = []
eval entry["cmd"]
}
}
}
}
subCollections.each {
| subCollection |
handleCollection(collection.dirname + subCollection)
}
end
def handleCollectionDirectory(collection)
collectionName = simplifyCollectionName(collection)
$collection = collection
$collectionName = collectionName
prepareCollection(collectionName)
Dir.chdir($outputDir) {
$benchmarkDirectory = $collection
allJSFiles($collection).each {
| path |
$benchmark = path.basename
$runCommandOptions = {}
$testSpecificRequiredOptions = []
defaultRun unless parseRunCommands
}
}
end
def handleCollection(collection)
collection = Pathname.new(collection)
if collection.file?
handleCollectionFile(collection)
else
handleCollectionDirectory(collection)
end
end
def prepareBundle
raise if $bundle
if $doNotMessWithVMPath
if !$remote and !$tarball
$testingFrameworkPath = (frameworkFromJSCPath($jscPath) || $jscPath.dirname).realpath
$jscPath = Pathname.new($jscPath).realpath
else
$testingFrameworkPath = frameworkFromJSCPath($jscPath)
end
else
originalJSCPath = $jscPath
vmDir = $outputDir + ".vm"
FileUtils.mkdir_p vmDir
frameworkPath = frameworkFromJSCPath($jscPath)
destinationFrameworkPath = Pathname.new(".vm") + "JavaScriptCore.framework"
$jscPath = destinationFrameworkPath + "Helpers" + "jsc"
$testingFrameworkPath = Pathname.new("..") + destinationFrameworkPath
if frameworkPath
source = frameworkPath
destination = Pathname.new(".vm")
elsif $hostOS == "windows"
# Make sure to copy dll along with jsc on Windows
originalJSCDir = File.dirname(originalJSCPath)
source = [originalJSCPath] + [originalJSCDir + "/jscLib.dll"]
# Check for and copy JavaScriptCore.dll and WTF.dll for dynamic builds
javaScriptCoreDLLPath = File.join(originalJSCDir, "JavaScriptCore.dll")
wtfDLLPath = File.join(originalJSCDir, "WTF.dll")
if (File.exists?(javaScriptCoreDLLPath))
source = source + [javaScriptCoreDLLPath]
end
if (File.exists?(wtfDLLPath))
source = source + [wtfDLLPath]
end
destination = $jscPath.dirname
Dir.chdir($outputDir) {
FileUtils.mkdir_p destination
}
else
source = originalJSCPath
destination = $jscPath
Dir.chdir($outputDir) {
FileUtils.mkdir_p $jscPath.dirname
}
end
Dir.chdir($outputDir) {
if $copyVM
FileUtils.cp_r source, destination
else
begin
FileUtils.ln_s source, destination
rescue Exception
$stderr.puts "Warning: unable to create soft link, trying to copy."
FileUtils.cp_r source, destination
end
end
if $remote and $hostOS == "linux"
bundle_binary = (Pathname.new(THIS_SCRIPT_PATH).dirname + 'bundle-binary').realpath
Dir.mktmpdir {
| tmpdir |
# Generate bundle in a temporary directory so that
# we can safely pick it up regardless of its name
# (it's the only zip file there).
cmdline = [
bundle_binary.to_s,
"--dest-dir=#{$jscPath.dirname}",
"--log-level=debug",
$jscPath.to_s
]
if not $ldd.nil?
cmdline << "--ldd=#{$ldd}"
end
mysys(cmdline)
}
end
}
end
Dir.chdir($outputDir) {
FileUtils.cp_r HELPERS_PATH, ".helpers"
}
ARGV.each {
| collection |
handleCollection(collection)
}
puts
end
def cleanOldResults
raise unless $bundle
eachResultFile($outputDir) {
| path |
FileUtils.rm_f path
}
end
def cleanEmptyResultFiles
eachResultFile($outputDir) {
| path |
next unless path.basename.to_s =~ /\.out$/
next unless FileTest.size(path) == 0
FileUtils.rm_f path
}
end
def eachResultFile(startingDir, &block)
dirsToClean = [startingDir]
until dirsToClean.empty?
nextDir = dirsToClean.pop
Dir.foreach(nextDir) {
| entry |
next if entry =~ /^\./
path = nextDir + entry
if path.directory?
dirsToClean.push(path)
else
block.call(path)
end
}
end
end
def parallelEach(array, &block)
# Short of using 'require "parallel"' we use a simple statically
# partitioned multiprocess dispatch for processing fixed chunks of the
# given array in parallel. We use Process rather than Thread to
# parallelise CPU load as well as IO (due to the GIL).
# Some platforms (notably Windows) do not support Process.fork, so work
# serially on these.
nWorkers = Process.respond_to?(:fork) ? $numChildProcesses : 1
# Chunk size is rounded up
chunkSize = (array.size + (nWorkers - 1)) / nWorkers
# If chunk size is too small, work serially
if chunkSize <= 1
nWorkers = 1
chunkSize = array.size
end
childPIDs = []
# Chunks 1 to nWorkers-1 run in the worker processes
for i in 1...nWorkers do
chunkStart = i*chunkSize
break if chunkStart >= array.size
pid = Process.fork
if pid.nil?
# Worker process. Process chunk i.
array.slice(chunkStart, chunkSize).each(&block)
Process.exit!(true)
else
childPIDs << pid
end
end
# Main process. Process chunk 0.
array.slice(0, chunkSize).each(&block)
# Wait for workers
for pid in childPIDs do
_, status = Process.waitpid2(pid)
raise "Child process still running" unless status.exited?
if status.exitstatus != 0
STDERR.puts "Child process failed with status: #{status.exitstatus}"
exit(status.exitstatus)
end
end
end
def cleanRunnerDirectory
raise unless $bundle
Dir.foreach($runnerDir) {
| filename |
next unless filename =~ /^#{STATUS_FILE_PREFIX}/
FileUtils.rm_f $runnerDir + filename
}
end
def sshRead(cmd, remoteHost, options={})
raise unless $remote
result = ""
IO.popen("ssh -o NoHostAuthenticationForLocalhost=yes -p #{remoteHost.port}" + (remoteHost.identity_file_path ? " -i #{remoteHost.identity_file_path}" : "") + " #{remoteHost.user}@#{remoteHost.host} '#{cmd}'", "r") {
| inp |
inp.each_line {
| line |
result += line
}
}
raise "#{$?}" unless $?.success? or options[:ignoreFailure]
result
end
def runCommandOnTester(cmd)
if $remote
result = sshRead(cmd, $remoteHosts[0])
else
result = `#{cmd}`
end
end
def numberOfProcessors
if $hostOS == "windows"
numProcessors = runCommandOnTester("cmd /c echo %NUMBER_OF_PROCESSORS%").to_i
else
begin
numProcessors = runCommandOnTester("sysctl -n hw.activecpu 2>/dev/null").to_i
rescue
numProcessors = 0
end
if numProcessors == 0
begin
numProcessors = runCommandOnTester("nproc --all 2>/dev/null").to_i
rescue
numProcessors == 0
end
end
end
if numProcessors == 0
numProcessors = 1
end
return numProcessors
end
def runAndMonitorCommandOutput(cmd, &blk)
cmd = cmd.collect { |a|
a.to_s
}
IO.popen(cmd, "r") {
| p |
p.each_line {
| line |
blk.call(p.pid, line)
puts(line)
$stdout.flush
}
}
end
$runnerDirMutex = Mutex.new
def runAndMonitorTestRunnerCommand(cmd, options={})
numberOfTests = 0
$runnerDirMutex.synchronize {
Dir.chdir($runnerDir) {
# -1 for the runscript, and -2 for '..' and '.'
numberOfTests = Dir.entries(".").count - 3
}
}
unless $progressMeter
mysys(cmd.join(' '), options)
else
running = {}
didRun = {}
didFail = {}
blankLine = true
prevStringLength = 0
IO.popen(cmd.join(' '), mode="r") {
| inp |
inp.each_line {
| line |
line = line.scrub.chomp
if line =~ /^Running /
running[$~.post_match] = true
elsif line =~ /^PASS: /
didRun[$~.post_match] = true
elsif line =~ /^FAIL: /
didRun[$~.post_match] = true
didFail[$~.post_match] = true
else
unless blankLine
print("\r" + " " * prevStringLength + "\r")
end
puts line
blankLine = true
end
def lpad(str, chars)
str = str.to_s
if str.length > chars
str
else
"%#{chars}s"%(str)
end
end
string = ""
string += "\r#{lpad(didRun.size, numberOfTests.to_s.size)}/#{numberOfTests}"
unless didFail.empty?
string += " (failed #{didFail.size})"
end
string += " "
(running.size - didRun.size).times {
string += "."
}
if string.length < prevStringLength
print string
print(" " * (prevStringLength - string.length))
end
print string
prevStringLength = string.length
blankLine = false
$stdout.flush
}
}
puts
if not $?.success? and not options[:ignoreFailure]
raise "Failed to run #{cmd}: #{$?.inspect}"
end
end
end
def getRemoteDirectoryIfNeeded(remoteHost)
if !remoteHost.remoteDirectory
remoteHost.remoteDirectory = JSON::parse(sshRead("cat ~/.bencher", remoteHost))["tempPath"]
end
end
def copyBundleToRemote(remoteHost)
mysys(["ssh", "-o", "NoHostAuthenticationForLocalhost=yes"] + (remoteHost.identity_file_path ? ["-i", remoteHost.identity_file_path] : []) + ["-p", remoteHost.port.to_s, "#{remoteHost.user}@#{remoteHost.host}", "mkdir -p #{remoteHost.remoteDirectory}"])
mysys(["scp", "-o", "NoHostAuthenticationForLocalhost=yes"] + (remoteHost.identity_file_path ? ["-i", remoteHost.identity_file_path] : []) + ["-P", remoteHost.port.to_s, ($outputDir.dirname + $tarFileName).to_s, "#{remoteHost.user}@#{remoteHost.host}:#{remoteHost.remoteDirectory}"])
end
def exportBaseEnvironmentVariables(escape)
if escape
dyldFrameworkPath = "\\$(cd #{$testingFrameworkPath.dirname}; pwd)"
ldLibraryPath = "\\$(cd #{$testingFrameworkPath.dirname}/..; pwd)/#{$jscPath.dirname}"
else
dyldFrameworkPath = "\$(cd #{$testingFrameworkPath.dirname}; pwd)"
ldLibraryPath = "\$(cd #{$testingFrameworkPath.dirname}/..; pwd)/#{$jscPath.dirname}"
end
[
"export DYLD_FRAMEWORK_PATH=#{dyldFrameworkPath} && ",
"export LD_LIBRARY_PATH=#{ldLibraryPath} &&",
"export JSCTEST_timeout=#{Shellwords.shellescape(ENV['JSCTEST_timeout'])} && ",
"export JSCTEST_hardTimeout=#{Shellwords.shellescape(ENV['JSCTEST_hardTimeout'])} && ",
"export JSCTEST_memoryLimit=#{Shellwords.shellescape(ENV['JSCTEST_memoryLimit'])} && ",
"export TZ=#{Shellwords.shellescape(ENV['TZ'])} && ",
].join("")
end
def runTestRunner(testRunner, remoteHosts, remoteIndex=0)
if not remoteHosts.nil?
remoteHost = remoteHosts[remoteIndex]
getRemoteDirectoryIfNeeded(remoteHost)
copyBundleToRemote(remoteHost)
remoteScript = "\""
remoteScript += "cd #{remoteHost.remoteDirectory} && "
remoteScript += "rm -rf #{$outputDir.basename} && "
remoteScript += "tar xzf #{$tarFileName} && "
remoteScript += "cd #{$outputDir.basename}/.runner && "
remoteScript += exportBaseEnvironmentVariables(true)
$envVars.each { |var| remoteScript += "export " << var << "\n" }
remoteScript += "#{testRunner.command(remoteIndex)}\""
runAndMonitorTestRunnerCommand(["ssh", "-o", "NoHostAuthenticationForLocalhost=yes"] + (remoteHost.identity_file_path ? ["-i", remoteHost.identity_file_path] : []) + ["-p", remoteHost.port.to_s, "#{remoteHost.user}@#{remoteHost.host}", remoteScript])
else
Dir.chdir($runnerDir) {
runAndMonitorTestRunnerCommand(Shellwords.shellsplit(testRunner.command))
}
end
end
STATUS_RE = /^[.]\/#{STATUS_FILE_PREFIX}(?<index>\d+)\s(?<runId>\h+)\s(?<exitCode>\d+)\s(?<result>#{STATUS_FILE_PASS}|#{STATUS_FILE_FAIL})$/
def processStatusLine(map, line)
md = STATUS_RE.match(line)
if md.nil?
$stderr.puts("Could not parse line `#{line}`")
exit(1)
end
index = md[:index].to_i
runId = md[:runId]
result = md[:result]
if runId != $runUniqueId
if $bundle
# The scripts in the bundle have their own runId embedded,
# just ignore the value.
else
# This may conceivably happen if a remote goes
# away in the middle of a run and comes back
# online in the middle of a different run.
$stderr.puts("Ignoring stale status file for #{index} (ID #{runId} but current ID is #{$runUniqueId})")
return
end
end
if map.has_key?(index)
map[index].push(result)
else
map[index] = [result]
end
end
def getStatusMap(map={})
find_cmd = "find . -maxdepth 1 -name \"#{STATUS_FILE_PREFIX}*\" -a -size +0c -exec sh -c \"printf \\\"%s \\\" {}; cat {}\" \\;"
if $remote
# Note: here we're using $remoteHosts (instead of getting the
# list of live remoteHosts from the caller, because there may
# well be test results on a remoteHost that got rebooted
# (note, the test results are tagged with a run ID, so we'll
# ignore any stale results from a previous run).
$remoteHosts.each_with_index {
| host, remoteIndex |
runnerDir = "#{host.remoteDirectory}/#{$outputDir.basename}/.runner"
output = sshRead("if test -d #{runnerDir}; then cd #{runnerDir}; else false; fi && " + find_cmd, host, :ignoreFailure => true)
output.split(/\n/).each {
| line |
processStatusLine(map, line)
}
}
else
Dir.chdir($runnerDir) {
Dir.glob("#{STATUS_FILE_PREFIX}*").each do |name|
if File.size(name) > 0
File.open(name, 'r') { |f|
line = f.first
processStatusLine(map, "./#{name} #{line}")
}
end
end
}
end
map
end
def detectFailures(statusMap={})
raise if $bundle
if statusMap.size == 0
statusMap = getStatusMap
end
evaluator = TestResultEvaluatorFinal.new($runlist, statusMap)
evaluator.visit!
if evaluator.noresult > 0
$stderr.puts("Could not get the exit status for #{evaluator.noresult} tests")
# We can't change our exit code, as run-javascriptcore-tests
# expects 0 even when there are failures.
end
familyMap = evaluator.familyMap
File.open($outputDir + "resultsByFamily", "w") {
| outp |
first = true
familyMap.keys.sort.each {
| familyName |
if first
first = false
else
outp.puts
end
outp.print "#{familyName}:"
numPassed = 0
familyMap[familyName].each {
| entry |
if entry[:result] == "PASS"
numPassed += 1
end
}
if numPassed == familyMap[familyName].size
outp.puts " PASSED"
elsif numPassed == 0
outp.puts " FAILED"
else
outp.puts
familyMap[familyName].each {
| entry |
outp.puts " #{entry[:plan].name}: #{entry[:result]}"
}
end
}
}
end
def compressBundle
cmd = "cd #{$outputDir}/.. && tar -czf #{$tarFileName} #{$outputDir.basename}"
$stderr.puts ">> #{cmd}" if $verbosity >= 2
raise unless system(cmd)
end
def clean(file)
FileUtils.rm_rf file unless $bundle
end
clean($outputDir + "failed")
clean($outputDir + "passed")
clean($outputDir + "noresult")
clean($outputDir + "flaky")
clean($outputDir + "results")
clean($outputDir + "resultsByFamily")
clean($outputDir + ".vm")
clean($outputDir + ".helpers")
clean($outputDir + ".runner")
clean($outputDir + ".tests")
clean($outputDir + "_payload")
Dir.mkdir($outputDir) unless $outputDir.directory?
$outputDir = $outputDir.realpath
$runnerDir = $outputDir + ".runner"
if !$numChildProcesses
if ENV["WEBKIT_TEST_CHILD_PROCESSES"]
$numChildProcesses = ENV["WEBKIT_TEST_CHILD_PROCESSES"].to_i
$numChildProcessesSetByUser = true
else
$numChildProcesses = numberOfProcessors
end
end
if ENV["JSCTEST_timeout"]
# In the worst case, the processors just interfere with each other.
# Increase the timeout proportionally to the number of processors.
ENV["JSCTEST_timeout"] = (ENV["JSCTEST_timeout"].to_i.to_f * Math.sqrt($numChildProcesses)).to_i.to_s
end
# We do not adjust hardTimeout. If we are not producing any results during 1200 seconds, buildbot terminates the tests. So we should terminate hung tests.
if !ENV["JSCTEST_memoryLimit"] && $memoryLimited
ENV["JSCTEST_memoryLimit"] = (600 * 1024 * 1024).to_s
end
# Some tests fail if the time zone is not set to US/Pacific
# https://webkit.org/b/136363
# Set as done in run-javascript-tests
ENV["TZ"] = "US/Pacific";
def runBundle
raise unless $bundle
testRunner = TestRunner.create($testRunnerType, $runnerDir)
evaluator = BundleTestsExecutor.new($runlist, $serialPlans, ITERATION_LIMITS, $treatFailingAsFlaky, testRunner)
evaluator.loop
end
def runTarball
raise unless $tarball
prepareBundle
testRunner = TestRunner.create($testRunnerType, $runnerDir)
testRunner.prepare($runlist, $serialPlans, Set.new, nil)
compressBundle
end
def forEachRemote(remoteHosts, options={}, &blk)
threads = []
remoteHosts.each_index {
| index |
remoteHost = remoteHosts[index]
threads << Thread.new {
blk.call(index, remoteHost)
}
}
etime = nil
if options.has_key?(:timeout)
etime = Time.now + options[:timeout]
end
liveRemotes = []
threads.each_index {
| index |
thread = threads[index]
begin
if options.has_key?(:timeout)
if etime.nil?
# If a timeout has been requested and etime is nil,
# that means the timeout has expired and we shouldn't
# wait at all.
timeout = 0
else
timeout = etime - Time.now
if timeout < 0
timeout = 0
end
end
if thread.join(timeout).nil?
if $verbosity > 0
$stderr.puts("Timeout joining thread for remote #{remoteHosts[index]}")
end
# Timeout expired, so we can't block waiting for
# any other threads. Either they're done or
# they've also timed out.
etime = nil
raise CommandExecutionFailed
end
else
thread.join # No timeout requested, just block.
end
liveRemotes << remoteHosts[index]
rescue CommandExecutionFailed
if options[:dropOnFailure]
if $verbosity > 0
$stderr.puts("Dropping failed remote #{remoteHosts[index]}")
end
else
raise
end
end
}
liveRemotes
end
class TestRunnerGnuParallel < TestRunner
def prepareGnuParallelRunnerJobs(name, runlist, completedPlans)
path = @runnerDir + name
FileUtils.mkdir_p(@runnerDir)
File.open(path, "w") {
| outp |
runlist.each {
| plan |
if completedPlans.include?(plan)
next
end
outp.puts("./test_script_#{plan.index}")
}
}
end
def prepareRunner(runlist, serialPlans, completedPlans, remoteHosts)
prepareGnuParallelRunnerJobs("parallel-tests", runlist, completedPlans | serialPlans)
prepareGnuParallelRunnerJobs("serial-tests", serialPlans, completedPlans)
end
end
def withGnuParallelSshWrapper(&blk)
Tempfile.open('ssh-wrapper', $runnerDir) {
| wrapper |
head =
<<'EOF'
#!/bin/sh
remotedir="$1"
shift
remoteport="$1"
shift
remoteuser="$1"
shift
remotehost="$1"
shift
if test "x$1" != "x--"; then
echo "Expected '--' at this position, instead got $1" 1>&2
exit 3
fi
shift
EOF
wrapper.puts(head +
"echo \"$@\" | ssh -o ControlPath=./%C -o ControlMaster=auto -o ControlPersist=10m -o NoHostAuthenticationForLocalhost=yes -o StrictHostKeyChecking=no -o UserKnownHostsFile=/dev/null -p \"$remoteport\" -l \"$remoteuser\" -o RemoteCommand=\"if test -d '$remotedir'; then cd '$remotedir'; else echo '#{PARALLEL_REMOTE_WRAPPER_MARK_BEGIN}${remotehost}#{PARALLEL_REMOTE_WRAPPER_MARK_END}'; false; fi && sh -s\" \"$remotehost\""
)
FileUtils.chmod("ugo=rx", wrapper.path)
wrapper.close # Avoid ETXTBUSY
blk.call(wrapper.path)
}
end
def withGnuParallelSshLoginFile(remoteHosts, &blk)
withGnuParallelSshWrapper {
| wrapper |
Tempfile.open('slf', $runnerDir) {
| tf |
remoteHosts.each {
| remoteHost |
tf.puts("#{wrapper} #{remoteHost.remoteDirectory} #{remoteHost.port} #{remoteHost.user} #{remoteHost.host}")
}
tf.flush
blk.call(tf.path)
}
}
end
def unpackBundleGnuParallel(remoteHosts)
forEachRemote(remoteHosts, :dropOnFailure => true, :timeout => REMOTE_TIMEOUT) {
| _, remoteHost |
mysys(["ssh", "-o", "NoHostAuthenticationForLocalhost=yes"] +
(remoteHost.identity_file_path ? ["-i", remoteHost.identity_file_path] : []) +
["-p", remoteHost.port.to_s,
"#{remoteHost.user}@#{remoteHost.host}",
"cd #{Shellwords.shellescape(remoteHost.remoteDirectory)} && rm -rf #{$outputDir.basename} && tar xzf #{$tarFileName}"])
}
end
def runGnuParallelRunner(remoteHosts, inputs, options={})
timeout = 300
if ENV["JSCTEST_timeout"]
timeout = ENV["JSCTEST_timeout"].to_f.ceil.to_i
end
# Keep ncpus + 1 jobs running by default to avoid any stalls due
# to ssh latency.
parallelJobsOnEachHost = "+1"
if $numChildProcessesSetByUser
parallelJobsOnEachHost = $numChildProcesses
end
if options[:parallelJobsOnEachHost]
parallelJobsOnEachHost = options[:parallelJobsOnEachHost]
end
markerWithHost = Regexp.new(".*#{PARALLEL_REMOTE_WRAPPER_MARK_BEGIN}(.*)#{PARALLEL_REMOTE_WRAPPER_MARK_END}.*")
markerWithoutHost = Regexp.new(".*#{PARALLEL_REMOTE_STATE_LOST_MARKER}.*")
withGnuParallelSshLoginFile(remoteHosts) {
| slf |
cmd = [
"parallel",
"-j", "#{parallelJobsOnEachHost}",
# NB: the tests exit with 0 regardless of whether they
# passed or failed, so this will only retry tests that we
# weren't able to get a result for, likely because the
# connection went down or the remote OOM'd/crashed).
"--retries", "5",
"--line-buffer", # we know our output is line-oriented
"--slf", slf,
"--timeout", timeout.to_s,
"-a", inputs,
"if test -e #{$outputDir.basename}/.runner; then cd #{$outputDir.basename}/.runner; else echo #{PARALLEL_REMOTE_STATE_LOST_MARKER}; false; fi && " +
exportBaseEnvironmentVariables(false) +
$envVars.collect { |var | "export #{var} &&"}.join("") +
"sh "
]
runAndMonitorCommandOutput(cmd) {
| pid, line |
host = "<unknown host>"
md = markerWithoutHost.match(line)
if md.nil?
md = markerWithHost.match(line)
host = md[1] unless md.nil?
end
if not md.nil?
if $verbosity > 0
$stderr.puts("Remote host lost state, triggering high-level retry: #{host}")
end
# We could try to reprovision this specific remote
# host, but that seems needlessly complicated (we
# don't expect the remotes to go down every
# minute...). Simply kill the GNU parallel process.
Process.kill("TERM", pid)
end
}
}
end
# Unconditionally run the selftests on every execution, they're pretty cheap.
ExecutorSelfTests.run
TestResultEvaluatorSelfTests.run
class NonRemoteTestsExecutor < BaseTestsExecutor
def initialize(runlist, serialPlans, maxIterationsBounds, treatFailingAsFlaky, testRunner)
super(runlist, serialPlans,
nil,
maxIterationsBounds,
treatFailingAsFlaky
)
@testRunner = testRunner
end
def prepareExecution(remoteHosts)
remoteHosts
end
def refreshExecution(runlist, serialPlans, completedTests)
if not @remoteHosts.nil?
raise "remoteHosts #{@remoteHosts}, expected nil"
end
@testRunner.prepare(runlist, serialPlans, completedTests, @remoteHosts)
end
end
class NormalTestsExecutor < NonRemoteTestsExecutor
def prepareArtifacts(remoteHosts)
raise "remoteHosts not nil" unless remoteHosts.nil?
prepareBundle
@testRunner.prepare(@runlist, @serialPlans, Set.new, nil)
end
def executeTests(remoteHosts)
runTestRunner(@testRunner, nil, nil)
cleanEmptyResultFiles
end
def updateStatusMap(iteration, statusMap)
return getStatusMap(statusMap)
end
end
class BundleTestsExecutor < NonRemoteTestsExecutor
def prepareArtifacts(remoteHosts)
raise "remoteHosts not nil" unless remoteHosts.nil?
cleanRunnerDirectory
cleanOldResults
end
def executeTests(remoteHosts)
runTestRunner(@testRunner, nil, nil)
cleanEmptyResultFiles
end
def updateStatusMap(iteration, statusMap)
return getStatusMap(statusMap)
end
end
class BaseRemoteTestsExecutor < BaseTestsExecutor
def initialize(runlist, serialPlans, remoteHosts, iterationLimits,
treatFailingAsFlaky, testRunner)
super(runlist, serialPlans, remoteHosts, iterationLimits, treatFailingAsFlaky)
@testRunner = testRunner
end
def updateStatusMap(iteration, statusMap)
return getStatusMap(statusMap)
end
def refreshExecution(runlist, serialPlans, completedTests)
# Note, when running tests remotely, we always prepare tests
# for all the hosts when refreshing execution, as even hosts
# that went away during testing may have come back online in
# the meantime -- so we don't expect a list of live remote
# hosts to be passed in.
@testRunner.prepare(runlist, serialPlans, completedTests, @remoteHosts)
end
end
class RemoteTestsExecutor < BaseRemoteTestsExecutor
def prepareArtifacts(remoteHosts)
raise "remoteHosts nil" if remoteHosts.nil?
prepareBundle
@testRunner.prepare(@runlist, @serialPlans, Set.new, remoteHosts)
compressBundle
end
def prepareExecution(remoteHosts)
remoteHosts
end
def executeTests(remoteHosts)
forEachRemote(remoteHosts) {
| index |
runTestRunner(@testRunner, remoteHosts, index)
}
end
end
class GnuParallelTestsExecutor < BaseRemoteTestsExecutor
def prepareArtifacts(remoteHosts)
prepareBundle
@testRunner.prepare(@runlist, @serialPlans, Set.new, remoteHosts)
compressBundle
end
def prepareExecution(remoteHosts)
# If the preparatory steps fail, drop the remote host from our
# list. Otherwise, if it comes back online in the middle of an
# iteration, we'll try to run test jobs on it, possibly using
# an unrelated bundle from a previous run.
remoteHosts = forEachRemote(remoteHosts, {:dropOnFailure => true, :timeout => REMOTE_TIMEOUT}) {
| _, remoteHost |
getRemoteDirectoryIfNeeded(remoteHost)
copyBundleToRemote(remoteHost)
}
return unpackBundleGnuParallel(remoteHosts)
end
def executeTests(remoteHosts)
runGnuParallelRunner(remoteHosts, $runnerDir + "serial-tests",
{ :parallelJobsOnEachHost => 1})
runGnuParallelRunner(remoteHosts, $runnerDir + "parallel-tests")
end
end
def runNormal
raise if $bundle or $tarball
testRunner = TestRunner.create($testRunnerType, $runnerDir)
evaluator = NormalTestsExecutor.new($runlist, $serialPlans, ITERATION_LIMITS,
$treatFailingAsFlaky, testRunner)
statusMap = evaluator.loop
detectFailures(statusMap)
end
def runRemote
raise unless $remote
testRunner = TestRunner.create($testRunnerType, $runnerDir)
executor = RemoteTestsExecutor.new($runlist, $serialPlans, $remoteHosts, ITERATION_LIMITS, $treatFailingAsFlaky, testRunner)
statusMap = executor.loop
detectFailures(statusMap)
end
def runGnuParallel
raise "Can only use --gnu-parallel-runner with --remote*" unless $remote
raise "Can only use --gnu-parallel-runner with the default writer" unless $testWriter == "default"
testRunner = TestRunner.create($testRunnerType, $runnerDir)
executor = GnuParallelTestsExecutor.new($runlist, $serialPlans,
$remoteHosts, ITERATION_LIMITS,
$treatFailingAsFlaky, testRunner)
statusMap = executor.loop
detectFailures(statusMap)
end
puts
if $testRunnerType == :gnuparallel
raise unless $remote
end
if $bundle
runBundle
elsif $remote
if $testRunnerType == :gnuparallel
runGnuParallel
else
runRemote
end
elsif $tarball
runTarball
else
runNormal
end