| /* |
| * Copyright (c) 2010 NVIDIA, Corporation |
| * |
| * Permission is hereby granted, free of charge, to any person obtaining a copy |
| * of this software and associated documentation files (the "Software"), to deal |
| * in the Software without restriction, including without limitation the rights |
| * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell |
| * copies of the Software, and to permit persons to whom the Software is |
| * furnished to do so, subject to the following conditions: |
| * |
| * The above copyright notice and this permission notice (including the next |
| * paragraph) shall be included in all copies or substantial portions of the |
| * Software. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR |
| * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, |
| * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE |
| * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER |
| * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, |
| * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE |
| * SOFTWARE. |
| */ |
| |
| #ifndef __NVCTRL_H |
| #define __NVCTRL_H |
| |
| #include <stdint.h> |
| |
| /**************************************************************************/ |
| |
| /* |
| * Attribute Targets |
| * |
| * Targets define attribute groups. For example, some attributes are only |
| * valid to set on a GPU, others are only valid when talking about an |
| * X Screen. Target types are then what is used to identify the target |
| * group of the attribute you wish to set/query. |
| * |
| * Here are the supported target types: |
| */ |
| |
| #define NV_CTRL_TARGET_TYPE_X_SCREEN 0 |
| #define NV_CTRL_TARGET_TYPE_GPU 1 |
| #define NV_CTRL_TARGET_TYPE_FRAMELOCK 2 |
| #define NV_CTRL_TARGET_TYPE_VCSC 3 /* Visual Computing System */ |
| #define NV_CTRL_TARGET_TYPE_GVI 4 |
| #define NV_CTRL_TARGET_TYPE_COOLER 5 /* e.g., fan */ |
| #define NV_CTRL_TARGET_TYPE_THERMAL_SENSOR 6 |
| #define NV_CTRL_TARGET_TYPE_3D_VISION_PRO_TRANSCEIVER 7 |
| #define NV_CTRL_TARGET_TYPE_DISPLAY 8 |
| |
| /**************************************************************************/ |
| |
| /* |
| * Attributes |
| * |
| * Some attributes may only be read; some may require a display_mask |
| * argument and others may be valid only for specific target types. |
| * This information is encoded in the "permission" comment after each |
| * attribute #define, and can be queried at run time with |
| * XNVCTRLQueryValidAttributeValues() and/or |
| * XNVCTRLQueryValidTargetAttributeValues() |
| * |
| * Key to Integer Attribute "Permissions": |
| * |
| * R: The attribute is readable (in general, all attributes will be |
| * readable) |
| * |
| * W: The attribute is writable (attributes may not be writable for |
| * various reasons: they represent static system information, they |
| * can only be changed by changing an XF86Config option, etc). |
| * |
| * D: The attribute requires the display mask argument. The |
| * attributes NV_CTRL_CONNECTED_DISPLAYS and NV_CTRL_ENABLED_DISPLAYS |
| * will be a bitmask of what display devices are connected and what |
| * display devices are enabled for use in X, respectively. Each bit |
| * in the bitmask represents a display device; it is these bits which |
| * should be used as the display_mask when dealing with attributes |
| * designated with "D" below. For attributes that do not require the |
| * display mask, the argument is ignored. |
| * |
| * Alternatively, NV-CONTROL versions 1.27 and greater allow these |
| * attributes to be accessed via display target types, in which case |
| * the display_mask is ignored. |
| * |
| * G: The attribute may be queried using an NV_CTRL_TARGET_TYPE_GPU |
| * target type via XNVCTRLQueryTargetAttribute(). |
| * |
| * F: The attribute may be queried using an NV_CTRL_TARGET_TYPE_FRAMELOCK |
| * target type via XNVCTRLQueryTargetAttribute(). |
| * |
| * X: When Xinerama is enabled, this attribute is kept consistent across |
| * all Physical X Screens; assignment of this attribute will be |
| * broadcast by the NVIDIA X Driver to all X Screens. |
| * |
| * V: The attribute may be queried using an NV_CTRL_TARGET_TYPE_VCSC |
| * target type via XNVCTRLQueryTargetAttribute(). |
| * |
| * I: The attribute may be queried using an NV_CTRL_TARGET_TYPE_GVI target type |
| * via XNVCTRLQueryTargetAttribute(). |
| * |
| * Q: The attribute is a 64-bit integer attribute; use the 64-bit versions |
| * of the appropriate query interfaces. |
| * |
| * C: The attribute may be queried using an NV_CTRL_TARGET_TYPE_COOLER target |
| * type via XNVCTRLQueryTargetAttribute(). |
| * |
| * S: The attribute may be queried using an NV_CTRL_TARGET_TYPE_THERMAL_SENSOR |
| * target type via XNVCTRLQueryTargetAttribute(). |
| * |
| * T: The attribute may be queried using an |
| * NV_CTRL_TARGET_TYPE_3D_VISION_PRO_TRANSCEIVER target type |
| * via XNVCTRLQueryTargetAttribute(). |
| * |
| * NOTE: Unless mentioned otherwise, all attributes may be queried using |
| * an NV_CTRL_TARGET_TYPE_X_SCREEN target type via |
| * XNVCTRLQueryTargetAttribute(). |
| */ |
| |
| /**************************************************************************/ |
| |
| /* |
| * Integer attributes: |
| * |
| * Integer attributes can be queried through the XNVCTRLQueryAttribute() and |
| * XNVCTRLQueryTargetAttribute() function calls. |
| * |
| * Integer attributes can be set through the XNVCTRLSetAttribute() and |
| * XNVCTRLSetTargetAttribute() function calls. |
| * |
| * Unless otherwise noted, all integer attributes can be queried/set |
| * using an NV_CTRL_TARGET_TYPE_X_SCREEN target. Attributes that cannot |
| * take an NV_CTRL_TARGET_TYPE_X_SCREEN also cannot be queried/set through |
| * XNVCTRLQueryAttribute()/XNVCTRLSetAttribute() (Since these assume |
| * an X Screen target). |
| */ |
| |
| /* |
| * NV_CTRL_FLATPANEL_SCALING - not supported |
| */ |
| |
| #define NV_CTRL_FLATPANEL_SCALING 2 /* RWDG */ |
| #define NV_CTRL_FLATPANEL_SCALING_DEFAULT 0 |
| #define NV_CTRL_FLATPANEL_SCALING_NATIVE 1 |
| #define NV_CTRL_FLATPANEL_SCALING_SCALED 2 |
| #define NV_CTRL_FLATPANEL_SCALING_CENTERED 3 |
| #define NV_CTRL_FLATPANEL_SCALING_ASPECT_SCALED 4 |
| |
| /* |
| * NV_CTRL_FLATPANEL_DITHERING is deprecated; NV_CTRL_DITHERING should |
| * be used instead. |
| */ |
| |
| #define NV_CTRL_FLATPANEL_DITHERING 3 /* RWDG */ |
| #define NV_CTRL_FLATPANEL_DITHERING_DEFAULT 0 |
| #define NV_CTRL_FLATPANEL_DITHERING_ENABLED 1 |
| #define NV_CTRL_FLATPANEL_DITHERING_DISABLED 2 |
| |
| /* |
| * NV_CTRL_DITHERING - the requested dithering configuration; |
| * possible values are: |
| * |
| * 0: auto (the driver will decide when to dither) |
| * 1: enabled (the driver will always dither when possible) |
| * 2: disabled (the driver will never dither) |
| */ |
| |
| #define NV_CTRL_DITHERING 3 /* RWDG */ |
| #define NV_CTRL_DITHERING_AUTO 0 |
| #define NV_CTRL_DITHERING_ENABLED 1 |
| #define NV_CTRL_DITHERING_DISABLED 2 |
| |
| /* |
| * NV_CTRL_DIGITAL_VIBRANCE - sets the digital vibrance level for the |
| * specified display device. |
| */ |
| |
| #define NV_CTRL_DIGITAL_VIBRANCE 4 /* RWDG */ |
| |
| /* |
| * NV_CTRL_BUS_TYPE - returns the bus type through which the specified device |
| * is connected to the computer. |
| * When this attribute is queried on an X screen target, the bus type of the |
| * GPU driving the X screen is returned. |
| */ |
| |
| #define NV_CTRL_BUS_TYPE 5 /* R--GI */ |
| #define NV_CTRL_BUS_TYPE_AGP 0 |
| #define NV_CTRL_BUS_TYPE_PCI 1 |
| #define NV_CTRL_BUS_TYPE_PCI_EXPRESS 2 |
| #define NV_CTRL_BUS_TYPE_INTEGRATED 3 |
| |
| /* |
| * NV_CTRL_VIDEO_RAM - returns the total amount of memory available |
| * to the specified GPU (or the GPU driving the specified X |
| * screen). Note: if the GPU supports TurboCache(TM), the value |
| * reported may exceed the amount of video memory installed on the |
| * GPU. The value reported for integrated GPUs may likewise exceed |
| * the amount of dedicated system memory set aside by the system |
| * BIOS for use by the integrated GPU. |
| */ |
| |
| #define NV_CTRL_VIDEO_RAM 6 /* R--G */ |
| |
| /* |
| * NV_CTRL_IRQ - returns the interrupt request line used by the specified |
| * device. |
| * When this attribute is queried on an X screen target, the IRQ of the GPU |
| * driving the X screen is returned. |
| */ |
| |
| #define NV_CTRL_IRQ 7 /* R--GI */ |
| |
| /* |
| * NV_CTRL_OPERATING_SYSTEM - returns the operating system on which |
| * the X server is running. |
| */ |
| |
| #define NV_CTRL_OPERATING_SYSTEM 8 /* R--G */ |
| #define NV_CTRL_OPERATING_SYSTEM_LINUX 0 |
| #define NV_CTRL_OPERATING_SYSTEM_FREEBSD 1 |
| #define NV_CTRL_OPERATING_SYSTEM_SUNOS 2 |
| |
| /* |
| * NV_CTRL_SYNC_TO_VBLANK - enables sync to vblank for OpenGL clients. |
| * This setting is only applied to OpenGL clients that are started |
| * after this setting is applied. |
| */ |
| |
| #define NV_CTRL_SYNC_TO_VBLANK 9 /* RW-X */ |
| #define NV_CTRL_SYNC_TO_VBLANK_OFF 0 |
| #define NV_CTRL_SYNC_TO_VBLANK_ON 1 |
| |
| /* |
| * NV_CTRL_LOG_ANISO - enables anisotropic filtering for OpenGL |
| * clients; on some NVIDIA hardware, this can only be enabled or |
| * disabled; on other hardware different levels of anisotropic |
| * filtering can be specified. This setting is only applied to OpenGL |
| * clients that are started after this setting is applied. |
| */ |
| |
| #define NV_CTRL_LOG_ANISO 10 /* RW-X */ |
| |
| /* |
| * NV_CTRL_FSAA_MODE - the FSAA setting for OpenGL clients; possible |
| * FSAA modes: |
| * |
| * NV_CTRL_FSAA_MODE_2x "2x Bilinear Multisampling" |
| * NV_CTRL_FSAA_MODE_2x_5t "2x Quincunx Multisampling" |
| * NV_CTRL_FSAA_MODE_15x15 "1.5 x 1.5 Supersampling" |
| * NV_CTRL_FSAA_MODE_2x2 "2 x 2 Supersampling" |
| * NV_CTRL_FSAA_MODE_4x "4x Bilinear Multisampling" |
| * NV_CTRL_FSAA_MODE_4x_9t "4x Gaussian Multisampling" |
| * NV_CTRL_FSAA_MODE_8x "2x Bilinear Multisampling by 4x Supersampling" |
| * NV_CTRL_FSAA_MODE_16x "4x Bilinear Multisampling by 4x Supersampling" |
| * NV_CTRL_FSAA_MODE_8xS "4x Multisampling by 2x Supersampling" |
| * |
| * This setting is only applied to OpenGL clients that are started |
| * after this setting is applied. |
| */ |
| |
| #define NV_CTRL_FSAA_MODE 11 /* RW-X */ |
| #define NV_CTRL_FSAA_MODE_NONE 0 |
| #define NV_CTRL_FSAA_MODE_2x 1 |
| #define NV_CTRL_FSAA_MODE_2x_5t 2 |
| #define NV_CTRL_FSAA_MODE_15x15 3 |
| #define NV_CTRL_FSAA_MODE_2x2 4 |
| #define NV_CTRL_FSAA_MODE_4x 5 |
| #define NV_CTRL_FSAA_MODE_4x_9t 6 |
| #define NV_CTRL_FSAA_MODE_8x 7 |
| #define NV_CTRL_FSAA_MODE_16x 8 |
| #define NV_CTRL_FSAA_MODE_8xS 9 |
| #define NV_CTRL_FSAA_MODE_8xQ 10 |
| #define NV_CTRL_FSAA_MODE_16xS 11 |
| #define NV_CTRL_FSAA_MODE_16xQ 12 |
| #define NV_CTRL_FSAA_MODE_32xS 13 |
| #define NV_CTRL_FSAA_MODE_32x 14 |
| #define NV_CTRL_FSAA_MODE_64xS 15 |
| #define NV_CTRL_FSAA_MODE_MAX NV_CTRL_FSAA_MODE_64xS |
| |
| /* |
| * NV_CTRL_TEXTURE_SHARPEN - enables texture sharpening for OpenGL |
| * clients. This setting is only applied to OpenGL clients that are |
| * started after this setting is applied. |
| */ |
| |
| #define NV_CTRL_TEXTURE_SHARPEN 12 /* RW-X */ |
| #define NV_CTRL_TEXTURE_SHARPEN_OFF 0 |
| #define NV_CTRL_TEXTURE_SHARPEN_ON 1 |
| |
| /* |
| * NV_CTRL_UBB - returns whether UBB is enabled for the specified X |
| * screen. |
| */ |
| |
| #define NV_CTRL_UBB 13 /* R-- */ |
| #define NV_CTRL_UBB_OFF 0 |
| #define NV_CTRL_UBB_ON 1 |
| |
| /* |
| * NV_CTRL_OVERLAY - returns whether the RGB overlay is enabled for |
| * the specified X screen. |
| */ |
| |
| #define NV_CTRL_OVERLAY 14 /* R-- */ |
| #define NV_CTRL_OVERLAY_OFF 0 |
| #define NV_CTRL_OVERLAY_ON 1 |
| |
| /* |
| * NV_CTRL_STEREO - returns whether stereo (and what type) is enabled |
| * for the specified X screen. |
| */ |
| |
| #define NV_CTRL_STEREO 16 /* R-- */ |
| #define NV_CTRL_STEREO_OFF 0 |
| #define NV_CTRL_STEREO_DDC 1 |
| #define NV_CTRL_STEREO_BLUELINE 2 |
| #define NV_CTRL_STEREO_DIN 3 |
| #define NV_CTRL_STEREO_PASSIVE_EYE_PER_DPY 4 |
| #define NV_CTRL_STEREO_VERTICAL_INTERLACED 5 |
| #define NV_CTRL_STEREO_COLOR_INTERLACED 6 |
| #define NV_CTRL_STEREO_HORIZONTAL_INTERLACED 7 |
| #define NV_CTRL_STEREO_CHECKERBOARD_PATTERN 8 |
| #define NV_CTRL_STEREO_INVERSE_CHECKERBOARD_PATTERN 9 |
| #define NV_CTRL_STEREO_3D_VISION 10 |
| #define NV_CTRL_STEREO_3D_VISION_PRO 11 |
| |
| /* |
| * NV_CTRL_EMULATE - controls OpenGL software emulation of future |
| * NVIDIA GPUs. |
| */ |
| |
| #define NV_CTRL_EMULATE 17 /* RW- */ |
| #define NV_CTRL_EMULATE_NONE 0 |
| |
| /* |
| * NV_CTRL_TWINVIEW - returns whether TwinView is enabled for the |
| * specified X screen. |
| */ |
| |
| #define NV_CTRL_TWINVIEW 18 /* R-- */ |
| #define NV_CTRL_TWINVIEW_NOT_ENABLED 0 |
| #define NV_CTRL_TWINVIEW_ENABLED 1 |
| |
| /* |
| * NV_CTRL_CONNECTED_DISPLAYS - returns a display mask indicating the last |
| * cached state of the display devices connected to the GPU or GPU driving |
| * the specified X screen. |
| * |
| * This attribute may be queried through XNVCTRLQueryTargetAttribute() |
| * using a NV_CTRL_TARGET_TYPE_GPU or NV_CTRL_TARGET_TYPE_X_SCREEN target. |
| */ |
| |
| #define NV_CTRL_CONNECTED_DISPLAYS 19 /* R--G */ |
| |
| /* |
| * NV_CTRL_ENABLED_DISPLAYS - returns a display mask indicating what |
| * display devices are enabled for use on the specified X screen or |
| * GPU. |
| * |
| * This attribute may be queried through XNVCTRLQueryTargetAttribute() |
| * using a NV_CTRL_TARGET_TYPE_GPU or NV_CTRL_TARGET_TYPE_X_SCREEN target. |
| */ |
| |
| #define NV_CTRL_ENABLED_DISPLAYS 20 /* R--G */ |
| |
| /**************************************************************************/ |
| /* |
| * Integer attributes specific to configuring Frame Lock on boards that |
| * support it. |
| */ |
| |
| /* |
| * NV_CTRL_FRAMELOCK - returns whether the underlying GPU supports |
| * Frame Lock. All of the other frame lock attributes are only |
| * applicable if NV_CTRL_FRAMELOCK is _SUPPORTED. |
| * |
| * This attribute may be queried through XNVCTRLQueryTargetAttribute() |
| * using a NV_CTRL_TARGET_TYPE_GPU or NV_CTRL_TARGET_TYPE_X_SCREEN target. |
| */ |
| |
| #define NV_CTRL_FRAMELOCK 21 /* R--G */ |
| #define NV_CTRL_FRAMELOCK_NOT_SUPPORTED 0 |
| #define NV_CTRL_FRAMELOCK_SUPPORTED 1 |
| |
| /* |
| * NV_CTRL_FRAMELOCK_MASTER - get/set which display device to use |
| * as the frame lock master for the entire sync group. Note that only |
| * one node in the sync group should be configured as the master. |
| * |
| * This attribute can only be queried through XNVCTRLQueryTargetAttribute() |
| * using a NV_CTRL_TARGET_TYPE_GPU target. This attribute cannot be |
| * queried using a NV_CTRL_TARGET_TYPE_X_SCREEN. |
| */ |
| |
| #define NV_CTRL_FRAMELOCK_MASTER 22 /* RW-G */ |
| |
| /* These are deprecated. NV_CTRL_FRAMELOCK_MASTER now takes and |
| returns a display mask as value. */ |
| #define NV_CTRL_FRAMELOCK_MASTER_FALSE 0 |
| #define NV_CTRL_FRAMELOCK_MASTER_TRUE 1 |
| |
| /* |
| * NV_CTRL_FRAMELOCK_POLARITY - sync either to the rising edge of the |
| * frame lock pulse, the falling edge of the frame lock pulse or both. |
| * |
| * This attribute may be queried through XNVCTRLQueryTargetAttribute() |
| * using a NV_CTRL_TARGET_TYPE_FRAMELOCK or NV_CTRL_TARGET_TYPE_X_SCREEN |
| * target. |
| */ |
| |
| #define NV_CTRL_FRAMELOCK_POLARITY 23 /* RW-F */ |
| #define NV_CTRL_FRAMELOCK_POLARITY_RISING_EDGE 0x1 |
| #define NV_CTRL_FRAMELOCK_POLARITY_FALLING_EDGE 0x2 |
| #define NV_CTRL_FRAMELOCK_POLARITY_BOTH_EDGES 0x3 |
| |
| /* |
| * NV_CTRL_FRAMELOCK_SYNC_DELAY - delay between the frame lock pulse |
| * and the GPU sync. This value must be multiplied by |
| * NV_CTRL_FRAMELOCK_SYNC_DELAY_RESOLUTION to determine the sync delay in |
| * nanoseconds. |
| * |
| * This attribute may be queried through XNVCTRLQueryTargetAttribute() |
| * using a NV_CTRL_TARGET_TYPE_FRAMELOCK or NV_CTRL_TARGET_TYPE_X_SCREEN |
| * target. |
| * |
| * USAGE NODE: NV_CTRL_FRAMELOCK_SYNC_DELAY_MAX and |
| * NV_CTRL_FRAMELOCK_SYNC_DELAY_FACTOR are deprecated. |
| * The Sync Delay _MAX and _FACTOR are different for different |
| * GSync products and so, to be correct, the valid values for |
| * NV_CTRL_FRAMELOCK_SYNC_DELAY must be queried to get the range |
| * of acceptable sync delay values, and |
| * NV_CTRL_FRAMELOCK_SYNC_DELAY_RESOLUTION must be queried to |
| * obtain the correct factor. |
| */ |
| |
| #define NV_CTRL_FRAMELOCK_SYNC_DELAY 24 /* RW-F */ |
| #define NV_CTRL_FRAMELOCK_SYNC_DELAY_MAX 2047 // deprecated |
| #define NV_CTRL_FRAMELOCK_SYNC_DELAY_FACTOR 7.81 // deprecated |
| |
| /* |
| * NV_CTRL_FRAMELOCK_SYNC_INTERVAL - how many house sync pulses |
| * between the frame lock sync generation (0 == sync every house sync); |
| * this only applies to the master when receiving house sync. |
| * |
| * This attribute may be queried through XNVCTRLQueryTargetAttribute() |
| * using a NV_CTRL_TARGET_TYPE_FRAMELOCK or NV_CTRL_TARGET_TYPE_X_SCREEN |
| * target. |
| */ |
| |
| #define NV_CTRL_FRAMELOCK_SYNC_INTERVAL 25 /* RW-F */ |
| |
| /* |
| * NV_CTRL_FRAMELOCK_PORT0_STATUS - status of the rj45 port0. |
| * |
| * This attribute may be queried through XNVCTRLQueryTargetAttribute() |
| * using a NV_CTRL_TARGET_TYPE_FRAMELOCK or NV_CTRL_TARGET_TYPE_X_SCREEN |
| * target. |
| */ |
| |
| #define NV_CTRL_FRAMELOCK_PORT0_STATUS 26 /* R--F */ |
| #define NV_CTRL_FRAMELOCK_PORT0_STATUS_INPUT 0 |
| #define NV_CTRL_FRAMELOCK_PORT0_STATUS_OUTPUT 1 |
| |
| /* |
| * NV_CTRL_FRAMELOCK_PORT1_STATUS - status of the rj45 port1. |
| * |
| * This attribute may be queried through XNVCTRLQueryTargetAttribute() |
| * using a NV_CTRL_TARGET_TYPE_FRAMELOCK or NV_CTRL_TARGET_TYPE_X_SCREEN |
| * target. |
| */ |
| |
| #define NV_CTRL_FRAMELOCK_PORT1_STATUS 27 /* R--F */ |
| #define NV_CTRL_FRAMELOCK_PORT1_STATUS_INPUT 0 |
| #define NV_CTRL_FRAMELOCK_PORT1_STATUS_OUTPUT 1 |
| |
| /* |
| * NV_CTRL_FRAMELOCK_HOUSE_STATUS - returns whether or not the house |
| * sync signal was detected on the BNC connector of the frame lock |
| * board. |
| * |
| * This attribute may be queried through XNVCTRLQueryTargetAttribute() |
| * using a NV_CTRL_TARGET_TYPE_FRAMELOCK or NV_CTRL_TARGET_TYPE_X_SCREEN |
| * target. |
| */ |
| |
| #define NV_CTRL_FRAMELOCK_HOUSE_STATUS 28 /* R--F */ |
| #define NV_CTRL_FRAMELOCK_HOUSE_STATUS_NOT_DETECTED 0 |
| #define NV_CTRL_FRAMELOCK_HOUSE_STATUS_DETECTED 1 |
| |
| /* |
| * NV_CTRL_FRAMELOCK_SYNC - enable/disable the syncing of display |
| * devices to the frame lock pulse as specified by previous calls to |
| * NV_CTRL_FRAMELOCK_MASTER and NV_CTRL_FRAMELOCK_SLAVES. |
| * |
| * This attribute can only be queried through XNVCTRLQueryTargetAttribute() |
| * using a NV_CTRL_TARGET_TYPE_GPU target. This attribute cannot be |
| * queried using a NV_CTRL_TARGET_TYPE_X_SCREEN. |
| */ |
| |
| #define NV_CTRL_FRAMELOCK_SYNC 29 /* RW-G */ |
| #define NV_CTRL_FRAMELOCK_SYNC_DISABLE 0 |
| #define NV_CTRL_FRAMELOCK_SYNC_ENABLE 1 |
| |
| /* |
| * NV_CTRL_FRAMELOCK_SYNC_READY - reports whether a frame lock |
| * board is receiving sync (regardless of whether or not any display |
| * devices are using the sync). |
| * |
| * This attribute may be queried through XNVCTRLQueryTargetAttribute() |
| * using a NV_CTRL_TARGET_TYPE_FRAMELOCK or NV_CTRL_TARGET_TYPE_X_SCREEN |
| * target. |
| */ |
| |
| #define NV_CTRL_FRAMELOCK_SYNC_READY 30 /* R--F */ |
| #define NV_CTRL_FRAMELOCK_SYNC_READY_FALSE 0 |
| #define NV_CTRL_FRAMELOCK_SYNC_READY_TRUE 1 |
| |
| /* |
| * NV_CTRL_FRAMELOCK_STEREO_SYNC - this indicates that the GPU stereo |
| * signal is in sync with the frame lock stereo signal. |
| * |
| * This attribute may be queried through XNVCTRLQueryTargetAttribute() |
| * using a NV_CTRL_TARGET_TYPE_GPU or NV_CTRL_TARGET_TYPE_X_SCREEN |
| * target. |
| */ |
| |
| #define NV_CTRL_FRAMELOCK_STEREO_SYNC 31 /* R--G */ |
| #define NV_CTRL_FRAMELOCK_STEREO_SYNC_FALSE 0 |
| #define NV_CTRL_FRAMELOCK_STEREO_SYNC_TRUE 1 |
| |
| /* |
| * NV_CTRL_FRAMELOCK_TEST_SIGNAL - to test the connections in the sync |
| * group, tell the master to enable a test signal, then query port[01] |
| * status and sync_ready on all slaves. When done, tell the master to |
| * disable the test signal. Test signal should only be manipulated |
| * while NV_CTRL_FRAMELOCK_SYNC is enabled. |
| * |
| * The TEST_SIGNAL is also used to reset the Universal Frame Count (as |
| * returned by the glXQueryFrameCountNV() function in the |
| * GLX_NV_swap_group extension). Note: for best accuracy of the |
| * Universal Frame Count, it is recommended to toggle the TEST_SIGNAL |
| * on and off after enabling frame lock. |
| * |
| * This attribute may be queried through XNVCTRLQueryTargetAttribute() |
| * using a NV_CTRL_TARGET_TYPE_GPU or NV_CTRL_TARGET_TYPE_X_SCREEN target. |
| */ |
| |
| #define NV_CTRL_FRAMELOCK_TEST_SIGNAL 32 /* RW-G */ |
| #define NV_CTRL_FRAMELOCK_TEST_SIGNAL_DISABLE 0 |
| #define NV_CTRL_FRAMELOCK_TEST_SIGNAL_ENABLE 1 |
| |
| /* |
| * NV_CTRL_FRAMELOCK_ETHERNET_DETECTED - The frame lock boards are |
| * cabled together using regular cat5 cable, connecting to rj45 ports |
| * on the backplane of the card. There is some concern that users may |
| * think these are ethernet ports and connect them to a |
| * router/hub/etc. The hardware can detect this and will shut off to |
| * prevent damage (either to itself or to the router). |
| * NV_CTRL_FRAMELOCK_ETHERNET_DETECTED may be called to find out if |
| * ethernet is connected to one of the rj45 ports. An appropriate |
| * error message should then be displayed. The _PORT0 and _PORT1 |
| * values may be or'ed together. |
| * |
| * This attribute may be queried through XNVCTRLQueryTargetAttribute() |
| * using a NV_CTRL_TARGET_TYPE_FRAMELOCK or NV_CTRL_TARGET_TYPE_X_SCREEN |
| * target. |
| */ |
| |
| #define NV_CTRL_FRAMELOCK_ETHERNET_DETECTED 33 /* R--F */ |
| #define NV_CTRL_FRAMELOCK_ETHERNET_DETECTED_NONE 0 |
| #define NV_CTRL_FRAMELOCK_ETHERNET_DETECTED_PORT0 0x1 |
| #define NV_CTRL_FRAMELOCK_ETHERNET_DETECTED_PORT1 0x2 |
| |
| /* |
| * NV_CTRL_FRAMELOCK_VIDEO_MODE - get/set what video mode is used |
| * to interperate the house sync signal. This should only be set |
| * on the master. |
| * |
| * This attribute may be queried through XNVCTRLQueryTargetAttribute() |
| * using a NV_CTRL_TARGET_TYPE_FRAMELOCK or NV_CTRL_TARGET_TYPE_X_SCREEN |
| * target. |
| */ |
| |
| #define NV_CTRL_FRAMELOCK_VIDEO_MODE 34 /* RW-F */ |
| #define NV_CTRL_FRAMELOCK_VIDEO_MODE_NONE 0 |
| #define NV_CTRL_FRAMELOCK_VIDEO_MODE_TTL 1 |
| #define NV_CTRL_FRAMELOCK_VIDEO_MODE_NTSCPALSECAM 2 |
| #define NV_CTRL_FRAMELOCK_VIDEO_MODE_HDTV 3 |
| |
| /* |
| * During FRAMELOCK bring-up, the above values were redefined to |
| * these: |
| */ |
| |
| #define NV_CTRL_FRAMELOCK_VIDEO_MODE_COMPOSITE_AUTO 0 |
| #define NV_CTRL_FRAMELOCK_VIDEO_MODE_TTL 1 |
| #define NV_CTRL_FRAMELOCK_VIDEO_MODE_COMPOSITE_BI_LEVEL 2 |
| #define NV_CTRL_FRAMELOCK_VIDEO_MODE_COMPOSITE_TRI_LEVEL 3 |
| |
| /* |
| * NV_CTRL_FRAMELOCK_SYNC_RATE - this is the refresh rate that the |
| * frame lock board is sending to the GPU, in milliHz. |
| * |
| * This attribute may be queried through XNVCTRLQueryTargetAttribute() |
| * using a NV_CTRL_TARGET_TYPE_FRAMELOCK or NV_CTRL_TARGET_TYPE_X_SCREEN |
| * target. |
| */ |
| |
| #define NV_CTRL_FRAMELOCK_SYNC_RATE 35 /* R--F */ |
| |
| /**************************************************************************/ |
| |
| /* |
| * NV_CTRL_FORCE_GENERIC_CPU - inhibit the use of CPU specific |
| * features such as MMX, SSE, or 3DNOW! for OpenGL clients; this |
| * option may result in performance loss, but may be useful in |
| * conjunction with software such as the Valgrind memory debugger. |
| * This setting is only applied to OpenGL clients that are started |
| * after this setting is applied. |
| * |
| * USAGE NOTE: This attribute is deprecated. CPU compatibility is now |
| * checked each time during initialization. |
| */ |
| |
| #define NV_CTRL_FORCE_GENERIC_CPU 37 /* RW-X */ |
| #define NV_CTRL_FORCE_GENERIC_CPU_DISABLE 0 |
| #define NV_CTRL_FORCE_GENERIC_CPU_ENABLE 1 |
| |
| /* |
| * NV_CTRL_OPENGL_AA_LINE_GAMMA - for OpenGL clients, allow |
| * Gamma-corrected antialiased lines to consider variances in the |
| * color display capabilities of output devices when rendering smooth |
| * lines. Only available on recent Quadro GPUs. This setting is only |
| * applied to OpenGL clients that are started after this setting is |
| * applied. |
| */ |
| |
| #define NV_CTRL_OPENGL_AA_LINE_GAMMA 38 /* RW-X */ |
| #define NV_CTRL_OPENGL_AA_LINE_GAMMA_DISABLE 0 |
| #define NV_CTRL_OPENGL_AA_LINE_GAMMA_ENABLE 1 |
| |
| /* |
| * NV_CTRL_FRAMELOCK_TIMING - this is TRUE when the gpu is both receiving |
| * and locked to an input timing signal. Timing information may come from |
| * the following places: Another frame lock device that is set to master, |
| * the house sync signal, or the GPU's internal timing from a display |
| * device. |
| * |
| * This attribute may be queried through XNVCTRLQueryTargetAttribute() |
| * using a NV_CTRL_TARGET_TYPE_GPU or NV_CTRL_TARGET_TYPE_X_SCREEN target. |
| */ |
| |
| #define NV_CTRL_FRAMELOCK_TIMING 39 /* R--G */ |
| #define NV_CTRL_FRAMELOCK_TIMING_FALSE 0 |
| #define NV_CTRL_FRAMELOCK_TIMING_TRUE 1 |
| |
| /* |
| * NV_CTRL_FLIPPING_ALLOWED - when TRUE, OpenGL will swap by flipping |
| * when possible; when FALSE, OpenGL will alway swap by blitting. |
| */ |
| |
| #define NV_CTRL_FLIPPING_ALLOWED 40 /* RW-X */ |
| #define NV_CTRL_FLIPPING_ALLOWED_FALSE 0 |
| #define NV_CTRL_FLIPPING_ALLOWED_TRUE 1 |
| |
| /* |
| * NV_CTRL_ARCHITECTURE - returns the architecture on which the X server is |
| * running. |
| */ |
| |
| #define NV_CTRL_ARCHITECTURE 41 /* R-- */ |
| #define NV_CTRL_ARCHITECTURE_X86 0 |
| #define NV_CTRL_ARCHITECTURE_X86_64 1 |
| #define NV_CTRL_ARCHITECTURE_IA64 2 |
| |
| /* |
| * NV_CTRL_TEXTURE_CLAMPING - texture clamping mode in OpenGL. By |
| * default, _SPEC is used, which forces OpenGL texture clamping to |
| * conform with the OpenGL specification. _EDGE forces NVIDIA's |
| * OpenGL implementation to remap GL_CLAMP to GL_CLAMP_TO_EDGE, |
| * which is not strictly conformant, but some applications rely on |
| * the non-conformant behavior. |
| */ |
| |
| #define NV_CTRL_TEXTURE_CLAMPING 42 /* RW-X */ |
| #define NV_CTRL_TEXTURE_CLAMPING_EDGE 0 |
| #define NV_CTRL_TEXTURE_CLAMPING_SPEC 1 |
| |
| #define NV_CTRL_CURSOR_SHADOW 43 /* RW- */ |
| #define NV_CTRL_CURSOR_SHADOW_DISABLE 0 |
| #define NV_CTRL_CURSOR_SHADOW_ENABLE 1 |
| |
| #define NV_CTRL_CURSOR_SHADOW_ALPHA 44 /* RW- */ |
| #define NV_CTRL_CURSOR_SHADOW_RED 45 /* RW- */ |
| #define NV_CTRL_CURSOR_SHADOW_GREEN 46 /* RW- */ |
| #define NV_CTRL_CURSOR_SHADOW_BLUE 47 /* RW- */ |
| |
| #define NV_CTRL_CURSOR_SHADOW_X_OFFSET 48 /* RW- */ |
| #define NV_CTRL_CURSOR_SHADOW_Y_OFFSET 49 /* RW- */ |
| |
| /* |
| * When Application Control for FSAA is enabled, then what the |
| * application requests is used, and NV_CTRL_FSAA_MODE is ignored. If |
| * this is disabled, then any application setting is overridden with |
| * NV_CTRL_FSAA_MODE |
| */ |
| |
| #define NV_CTRL_FSAA_APPLICATION_CONTROLLED 50 /* RW-X */ |
| #define NV_CTRL_FSAA_APPLICATION_CONTROLLED_ENABLED 1 |
| #define NV_CTRL_FSAA_APPLICATION_CONTROLLED_DISABLED 0 |
| |
| /* |
| * When Application Control for LogAniso is enabled, then what the |
| * application requests is used, and NV_CTRL_LOG_ANISO is ignored. If |
| * this is disabled, then any application setting is overridden with |
| * NV_CTRL_LOG_ANISO |
| */ |
| |
| #define NV_CTRL_LOG_ANISO_APPLICATION_CONTROLLED 51 /* RW-X */ |
| #define NV_CTRL_LOG_ANISO_APPLICATION_CONTROLLED_ENABLED 1 |
| #define NV_CTRL_LOG_ANISO_APPLICATION_CONTROLLED_DISABLED 0 |
| |
| /* |
| * IMAGE_SHARPENING adjusts the sharpness of the display's image |
| * quality by amplifying high frequency content. Valid values will |
| * normally be in the range [0,32). Only available on GeForceFX or |
| * newer. |
| */ |
| |
| #define NV_CTRL_IMAGE_SHARPENING 52 /* RWDG */ |
| |
| /* |
| * NV_CTRL_TV_OVERSCAN adjusts the amount of overscan on the specified |
| * display device. |
| */ |
| |
| #define NV_CTRL_TV_OVERSCAN 53 /* RWDG */ |
| |
| /* |
| * NV_CTRL_TV_FLICKER_FILTER adjusts the amount of flicker filter on |
| * the specified display device. |
| */ |
| |
| #define NV_CTRL_TV_FLICKER_FILTER 54 /* RWDG */ |
| |
| /* |
| * NV_CTRL_TV_BRIGHTNESS adjusts the amount of brightness on the |
| * specified display device. |
| */ |
| |
| #define NV_CTRL_TV_BRIGHTNESS 55 /* RWDG */ |
| |
| /* |
| * NV_CTRL_TV_HUE adjusts the amount of hue on the specified display |
| * device. |
| */ |
| |
| #define NV_CTRL_TV_HUE 56 /* RWDG */ |
| |
| /* |
| * NV_CTRL_TV_CONTRAST adjusts the amount of contrast on the specified |
| * display device. |
| */ |
| |
| #define NV_CTRL_TV_CONTRAST 57 /* RWDG */ |
| |
| /* |
| * NV_CTRL_TV_SATURATION adjusts the amount of saturation on the |
| * specified display device. |
| */ |
| |
| #define NV_CTRL_TV_SATURATION 58 /* RWDG */ |
| |
| /* |
| * NV_CTRL_TV_RESET_SETTINGS - this write-only attribute can be used |
| * to request that all TV Settings be reset to their default values; |
| * typical usage would be that this attribute be sent, and then all |
| * the TV attributes be queried to retrieve their new values. |
| */ |
| |
| #define NV_CTRL_TV_RESET_SETTINGS 59 /* -WDG */ |
| |
| /* |
| * NV_CTRL_GPU_CORE_TEMPERATURE reports the current core temperature |
| * of the GPU driving the X screen. |
| */ |
| |
| #define NV_CTRL_GPU_CORE_TEMPERATURE 60 /* R--G */ |
| |
| /* |
| * NV_CTRL_GPU_CORE_THRESHOLD reports the current GPU core slowdown |
| * threshold temperature, NV_CTRL_GPU_DEFAULT_CORE_THRESHOLD and |
| * NV_CTRL_GPU_MAX_CORE_THRESHOLD report the default and MAX core |
| * slowdown threshold temperatures. |
| * |
| * NV_CTRL_GPU_CORE_THRESHOLD reflects the temperature at which the |
| * GPU is throttled to prevent overheating. |
| */ |
| |
| #define NV_CTRL_GPU_CORE_THRESHOLD 61 /* R--G */ |
| #define NV_CTRL_GPU_DEFAULT_CORE_THRESHOLD 62 /* R--G */ |
| #define NV_CTRL_GPU_MAX_CORE_THRESHOLD 63 /* R--G */ |
| |
| /* |
| * NV_CTRL_AMBIENT_TEMPERATURE reports the current temperature in the |
| * immediate neighbourhood of the GPU driving the X screen. |
| */ |
| |
| #define NV_CTRL_AMBIENT_TEMPERATURE 64 /* R--G */ |
| |
| /* |
| * NV_CTRL_PBUFFER_SCANOUT_SUPPORTED - returns whether this X screen |
| * supports scanout of FP pbuffers; |
| * |
| * if this screen does not support PBUFFER_SCANOUT, then all other |
| * PBUFFER_SCANOUT attributes are unavailable. |
| * |
| * PBUFFER_SCANOUT is supported if and only if: |
| * - Twinview is configured with clone mode. The secondary screen is used to |
| * scanout the pbuffer. |
| * - The desktop is running in with 16 bits per pixel. |
| */ |
| #define NV_CTRL_PBUFFER_SCANOUT_SUPPORTED 65 /* R-- */ |
| #define NV_CTRL_PBUFFER_SCANOUT_FALSE 0 |
| #define NV_CTRL_PBUFFER_SCANOUT_TRUE 1 |
| |
| /* |
| * NV_CTRL_PBUFFER_SCANOUT_XID indicates the XID of the pbuffer used for |
| * scanout. |
| */ |
| #define NV_CTRL_PBUFFER_SCANOUT_XID 66 /* RW- */ |
| |
| /**************************************************************************/ |
| /* |
| * The NV_CTRL_GVO_* integer attributes are used to configure GVO |
| * (Graphics to Video Out). This functionality is available, for |
| * example, on the Quadro FX 4000 SDI graphics board. |
| * |
| * The following is a typical usage pattern for the GVO attributes: |
| * |
| * - query NV_CTRL_GVO_SUPPORTED to determine if the X screen supports GV0. |
| * |
| * - specify NV_CTRL_GVO_SYNC_MODE (one of FREE_RUNNING, GENLOCK, or |
| * FRAMELOCK); if you specify GENLOCK or FRAMELOCK, you should also |
| * specify NV_CTRL_GVO_SYNC_SOURCE. |
| * |
| * - Use NV_CTRL_GVO_COMPOSITE_SYNC_INPUT_DETECTED and |
| * NV_CTRL_GVO_SDI_SYNC_INPUT_DETECTED to detect what input syncs are |
| * present. |
| * |
| * (If no analog sync is detected but it is known that a valid |
| * bi-level or tri-level sync is connected set |
| * NV_CTRL_GVO_COMPOSITE_SYNC_INPUT_DETECT_MODE appropriately and |
| * retest with NV_CTRL_GVO_COMPOSITE_SYNC_INPUT_DETECTED). |
| * |
| * - if syncing to input sync, query the |
| * NV_CTRL_GVIO_DETECTED_VIDEO_FORMAT attribute; note that Input video |
| * format can only be queried after SYNC_SOURCE is specified. |
| * |
| * - specify the NV_CTRL_GVIO_REQUESTED_VIDEO_FORMAT |
| * |
| * - specify the NV_CTRL_GVO_DATA_FORMAT |
| * |
| * - specify any custom Color Space Conversion (CSC) matrix, offset, |
| * and scale with XNVCTRLSetGvoColorConversion(). |
| * |
| * - if using the GLX_NV_video_out extension to display one or more |
| * pbuffers, call glXGetVideoDeviceNV() to lock the GVO output for use |
| * by the GLX client; then bind the pbuffer(s) to the GVO output with |
| * glXBindVideoImageNV() and send pbuffers to the GVO output with |
| * glXSendPbufferToVideoNV(); see the GLX_NV_video_out spec for more |
| * details. |
| * |
| * - if using the GLX_NV_present_video extension, call |
| * glXBindVideoDeviceNV() to bind the GVO video device to current |
| * OpenGL context. |
| * |
| * Note that setting most GVO attributes only causes the value to be |
| * cached in the X server. The values will be flushed to the hardware |
| * either when the next MetaMode is set that uses the GVO display |
| * device, or when a GLX pbuffer is bound to the GVO output (with |
| * glXBindVideoImageNV()). |
| * |
| * Note that GLX_NV_video_out/GLX_NV_present_video and X screen use |
| * are mutually exclusive. If a MetaMode is currently using the GVO |
| * device, then glXGetVideoDeviceNV and glXBindVideoImageNV() will |
| * fail. Similarly, if a GLX client has locked the GVO output (via |
| * glXGetVideoDeviceNV or glXBindVideoImageNV), then setting a |
| * MetaMode that uses the GVO device will fail. The |
| * NV_CTRL_GVO_GLX_LOCKED event will be sent when a GLX client locks |
| * the GVO output. |
| * |
| */ |
| |
| /* |
| * NV_CTRL_GVO_SUPPORTED - returns whether this X screen supports GVO; |
| * if this screen does not support GVO output, then all other GVO |
| * attributes are unavailable. |
| */ |
| |
| #define NV_CTRL_GVO_SUPPORTED 67 /* R-- */ |
| #define NV_CTRL_GVO_SUPPORTED_FALSE 0 |
| #define NV_CTRL_GVO_SUPPORTED_TRUE 1 |
| |
| /* |
| * NV_CTRL_GVO_SYNC_MODE - selects the GVO sync mode; possible values |
| * are: |
| * |
| * FREE_RUNNING - GVO does not sync to any external signal |
| * |
| * GENLOCK - the GVO output is genlocked to an incoming sync signal; |
| * genlocking locks at hsync. This requires that the output video |
| * format exactly match the incoming sync video format. |
| * |
| * FRAMELOCK - the GVO output is frame locked to an incoming sync |
| * signal; frame locking locks at vsync. This requires that the output |
| * video format have the same refresh rate as the incoming sync video |
| * format. |
| */ |
| |
| #define NV_CTRL_GVO_SYNC_MODE 68 /* RW- */ |
| #define NV_CTRL_GVO_SYNC_MODE_FREE_RUNNING 0 |
| #define NV_CTRL_GVO_SYNC_MODE_GENLOCK 1 |
| #define NV_CTRL_GVO_SYNC_MODE_FRAMELOCK 2 |
| |
| /* |
| * NV_CTRL_GVO_SYNC_SOURCE - if NV_CTRL_GVO_SYNC_MODE is set to either |
| * GENLOCK or FRAMELOCK, this controls which sync source is used as |
| * the incoming sync signal (either Composite or SDI). If |
| * NV_CTRL_GVO_SYNC_MODE is FREE_RUNNING, this attribute has no |
| * effect. |
| */ |
| |
| #define NV_CTRL_GVO_SYNC_SOURCE 69 /* RW- */ |
| #define NV_CTRL_GVO_SYNC_SOURCE_COMPOSITE 0 |
| #define NV_CTRL_GVO_SYNC_SOURCE_SDI 1 |
| |
| /* |
| * NV_CTRL_GVIO_REQUESTED_VIDEO_FORMAT - specifies the desired output video |
| * format for GVO devices or the desired input video format for GVI devices. |
| * |
| * Note that for GVO, the valid video formats may vary depending on |
| * the NV_CTRL_GVO_SYNC_MODE and the incoming sync video format. See |
| * the definition of NV_CTRL_GVO_SYNC_MODE. |
| * |
| * Note that when querying the ValidValues for this data type, the |
| * values are reported as bits within a bitmask |
| * (ATTRIBUTE_TYPE_INT_BITS); unfortunately, there are more valid |
| * value bits than will fit in a single 32-bit value. To solve this, |
| * query the ValidValues for NV_CTRL_GVIO_REQUESTED_VIDEO_FORMAT to |
| * check which of the first 31 VIDEO_FORMATS are valid, query the |
| * ValidValues for NV_CTRL_GVIO_REQUESTED_VIDEO_FORMAT2 to check which |
| * of the 32-63 VIDEO_FORMATS are valid, and query the ValidValues of |
| * NV_CTRL_GVIO_REQUESTED_VIDEO_FORMAT3 to check which of the 64-95 |
| * VIDEO_FORMATS are valid. |
| * |
| * Note: Setting this attribute on a GVI device may also result in the |
| * following NV-CONTROL attributes being reset on that device (to |
| * ensure the configuration remains valid): |
| * NV_CTRL_GVI_REQUESTED_STREAM_BITS_PER_COMPONENT |
| * NV_CTRL_GVI_REQUESTED_STREAM_COMPONENT_SAMPLING |
| */ |
| |
| #define NV_CTRL_GVIO_REQUESTED_VIDEO_FORMAT 70 /* RW--I */ |
| |
| #define NV_CTRL_GVIO_VIDEO_FORMAT_NONE 0 |
| #define NV_CTRL_GVIO_VIDEO_FORMAT_487I_59_94_SMPTE259_NTSC 1 |
| #define NV_CTRL_GVIO_VIDEO_FORMAT_576I_50_00_SMPTE259_PAL 2 |
| #define NV_CTRL_GVIO_VIDEO_FORMAT_720P_59_94_SMPTE296 3 |
| #define NV_CTRL_GVIO_VIDEO_FORMAT_720P_60_00_SMPTE296 4 |
| #define NV_CTRL_GVIO_VIDEO_FORMAT_1035I_59_94_SMPTE260 5 |
| #define NV_CTRL_GVIO_VIDEO_FORMAT_1035I_60_00_SMPTE260 6 |
| #define NV_CTRL_GVIO_VIDEO_FORMAT_1080I_50_00_SMPTE295 7 |
| #define NV_CTRL_GVIO_VIDEO_FORMAT_1080I_50_00_SMPTE274 8 |
| #define NV_CTRL_GVIO_VIDEO_FORMAT_1080I_59_94_SMPTE274 9 |
| #define NV_CTRL_GVIO_VIDEO_FORMAT_1080I_60_00_SMPTE274 10 |
| #define NV_CTRL_GVIO_VIDEO_FORMAT_1080P_23_976_SMPTE274 11 |
| #define NV_CTRL_GVIO_VIDEO_FORMAT_1080P_24_00_SMPTE274 12 |
| #define NV_CTRL_GVIO_VIDEO_FORMAT_1080P_25_00_SMPTE274 13 |
| #define NV_CTRL_GVIO_VIDEO_FORMAT_1080P_29_97_SMPTE274 14 |
| #define NV_CTRL_GVIO_VIDEO_FORMAT_1080P_30_00_SMPTE274 15 |
| #define NV_CTRL_GVIO_VIDEO_FORMAT_720P_50_00_SMPTE296 16 |
| #define NV_CTRL_GVIO_VIDEO_FORMAT_1080I_48_00_SMPTE274 17 |
| #define NV_CTRL_GVIO_VIDEO_FORMAT_1080I_47_96_SMPTE274 18 |
| #define NV_CTRL_GVIO_VIDEO_FORMAT_720P_30_00_SMPTE296 19 |
| #define NV_CTRL_GVIO_VIDEO_FORMAT_720P_29_97_SMPTE296 20 |
| #define NV_CTRL_GVIO_VIDEO_FORMAT_720P_25_00_SMPTE296 21 |
| #define NV_CTRL_GVIO_VIDEO_FORMAT_720P_24_00_SMPTE296 22 |
| #define NV_CTRL_GVIO_VIDEO_FORMAT_720P_23_98_SMPTE296 23 |
| #define NV_CTRL_GVIO_VIDEO_FORMAT_1080PSF_25_00_SMPTE274 24 |
| #define NV_CTRL_GVIO_VIDEO_FORMAT_1080PSF_29_97_SMPTE274 25 |
| #define NV_CTRL_GVIO_VIDEO_FORMAT_1080PSF_30_00_SMPTE274 26 |
| #define NV_CTRL_GVIO_VIDEO_FORMAT_1080PSF_24_00_SMPTE274 27 |
| #define NV_CTRL_GVIO_VIDEO_FORMAT_1080PSF_23_98_SMPTE274 28 |
| #define NV_CTRL_GVIO_VIDEO_FORMAT_2048P_30_00_SMPTE372 29 |
| #define NV_CTRL_GVIO_VIDEO_FORMAT_2048P_29_97_SMPTE372 30 |
| #define NV_CTRL_GVIO_VIDEO_FORMAT_2048I_60_00_SMPTE372 31 |
| #define NV_CTRL_GVIO_VIDEO_FORMAT_2048I_59_94_SMPTE372 32 |
| #define NV_CTRL_GVIO_VIDEO_FORMAT_2048P_25_00_SMPTE372 33 |
| #define NV_CTRL_GVIO_VIDEO_FORMAT_2048I_50_00_SMPTE372 34 |
| #define NV_CTRL_GVIO_VIDEO_FORMAT_2048P_24_00_SMPTE372 35 |
| #define NV_CTRL_GVIO_VIDEO_FORMAT_2048P_23_98_SMPTE372 36 |
| #define NV_CTRL_GVIO_VIDEO_FORMAT_2048I_48_00_SMPTE372 37 |
| #define NV_CTRL_GVIO_VIDEO_FORMAT_2048I_47_96_SMPTE372 38 |
| #define NV_CTRL_GVIO_VIDEO_FORMAT_1080P_50_00_3G_LEVEL_A_SMPTE274 39 |
| #define NV_CTRL_GVIO_VIDEO_FORMAT_1080P_59_94_3G_LEVEL_A_SMPTE274 40 |
| #define NV_CTRL_GVIO_VIDEO_FORMAT_1080P_60_00_3G_LEVEL_A_SMPTE274 41 |
| #define NV_CTRL_GVIO_VIDEO_FORMAT_1080P_60_00_3G_LEVEL_B_SMPTE274 42 |
| #define NV_CTRL_GVIO_VIDEO_FORMAT_1080I_60_00_3G_LEVEL_B_SMPTE274 43 |
| #define NV_CTRL_GVIO_VIDEO_FORMAT_2048I_60_00_3G_LEVEL_B_SMPTE372 44 |
| #define NV_CTRL_GVIO_VIDEO_FORMAT_1080P_50_00_3G_LEVEL_B_SMPTE274 45 |
| #define NV_CTRL_GVIO_VIDEO_FORMAT_1080I_50_00_3G_LEVEL_B_SMPTE274 46 |
| #define NV_CTRL_GVIO_VIDEO_FORMAT_2048I_50_00_3G_LEVEL_B_SMPTE372 47 |
| #define NV_CTRL_GVIO_VIDEO_FORMAT_1080P_30_00_3G_LEVEL_B_SMPTE274 48 |
| #define NV_CTRL_GVIO_VIDEO_FORMAT_2048P_30_00_3G_LEVEL_B_SMPTE372 49 |
| #define NV_CTRL_GVIO_VIDEO_FORMAT_1080P_25_00_3G_LEVEL_B_SMPTE274 50 |
| #define NV_CTRL_GVIO_VIDEO_FORMAT_2048P_25_00_3G_LEVEL_B_SMPTE372 51 |
| #define NV_CTRL_GVIO_VIDEO_FORMAT_1080P_24_00_3G_LEVEL_B_SMPTE274 52 |
| #define NV_CTRL_GVIO_VIDEO_FORMAT_2048P_24_00_3G_LEVEL_B_SMPTE372 53 |
| #define NV_CTRL_GVIO_VIDEO_FORMAT_1080I_48_00_3G_LEVEL_B_SMPTE274 54 |
| #define NV_CTRL_GVIO_VIDEO_FORMAT_2048I_48_00_3G_LEVEL_B_SMPTE372 55 |
| #define NV_CTRL_GVIO_VIDEO_FORMAT_1080P_59_94_3G_LEVEL_B_SMPTE274 56 |
| #define NV_CTRL_GVIO_VIDEO_FORMAT_1080I_59_94_3G_LEVEL_B_SMPTE274 57 |
| #define NV_CTRL_GVIO_VIDEO_FORMAT_2048I_59_94_3G_LEVEL_B_SMPTE372 58 |
| #define NV_CTRL_GVIO_VIDEO_FORMAT_1080P_29_97_3G_LEVEL_B_SMPTE274 59 |
| #define NV_CTRL_GVIO_VIDEO_FORMAT_2048P_29_97_3G_LEVEL_B_SMPTE372 60 |
| #define NV_CTRL_GVIO_VIDEO_FORMAT_1080P_23_98_3G_LEVEL_B_SMPTE274 61 |
| #define NV_CTRL_GVIO_VIDEO_FORMAT_2048P_23_98_3G_LEVEL_B_SMPTE372 62 |
| #define NV_CTRL_GVIO_VIDEO_FORMAT_1080I_47_96_3G_LEVEL_B_SMPTE274 63 |
| #define NV_CTRL_GVIO_VIDEO_FORMAT_2048I_47_96_3G_LEVEL_B_SMPTE372 64 |
| |
| /* |
| * The following are deprecated; NV_CTRL_GVIO_REQUESTED_VIDEO_FORMAT and the |
| * corresponding NV_CTRL_GVIO_* formats should be used instead. |
| */ |
| #define NV_CTRL_GVO_OUTPUT_VIDEO_FORMAT 70 /* RW- */ |
| |
| #define NV_CTRL_GVO_VIDEO_FORMAT_NONE 0 |
| #define NV_CTRL_GVO_VIDEO_FORMAT_487I_59_94_SMPTE259_NTSC 1 |
| #define NV_CTRL_GVO_VIDEO_FORMAT_576I_50_00_SMPTE259_PAL 2 |
| #define NV_CTRL_GVO_VIDEO_FORMAT_720P_59_94_SMPTE296 3 |
| #define NV_CTRL_GVO_VIDEO_FORMAT_720P_60_00_SMPTE296 4 |
| #define NV_CTRL_GVO_VIDEO_FORMAT_1035I_59_94_SMPTE260 5 |
| #define NV_CTRL_GVO_VIDEO_FORMAT_1035I_60_00_SMPTE260 6 |
| #define NV_CTRL_GVO_VIDEO_FORMAT_1080I_50_00_SMPTE295 7 |
| #define NV_CTRL_GVO_VIDEO_FORMAT_1080I_50_00_SMPTE274 8 |
| #define NV_CTRL_GVO_VIDEO_FORMAT_1080I_59_94_SMPTE274 9 |
| #define NV_CTRL_GVO_VIDEO_FORMAT_1080I_60_00_SMPTE274 10 |
| #define NV_CTRL_GVO_VIDEO_FORMAT_1080P_23_976_SMPTE274 11 |
| #define NV_CTRL_GVO_VIDEO_FORMAT_1080P_24_00_SMPTE274 12 |
| #define NV_CTRL_GVO_VIDEO_FORMAT_1080P_25_00_SMPTE274 13 |
| #define NV_CTRL_GVO_VIDEO_FORMAT_1080P_29_97_SMPTE274 14 |
| #define NV_CTRL_GVO_VIDEO_FORMAT_1080P_30_00_SMPTE274 15 |
| #define NV_CTRL_GVO_VIDEO_FORMAT_720P_50_00_SMPTE296 16 |
| #define NV_CTRL_GVO_VIDEO_FORMAT_1080I_48_00_SMPTE274 17 |
| #define NV_CTRL_GVO_VIDEO_FORMAT_1080I_47_96_SMPTE274 18 |
| #define NV_CTRL_GVO_VIDEO_FORMAT_720P_30_00_SMPTE296 19 |
| #define NV_CTRL_GVO_VIDEO_FORMAT_720P_29_97_SMPTE296 20 |
| #define NV_CTRL_GVO_VIDEO_FORMAT_720P_25_00_SMPTE296 21 |
| #define NV_CTRL_GVO_VIDEO_FORMAT_720P_24_00_SMPTE296 22 |
| #define NV_CTRL_GVO_VIDEO_FORMAT_720P_23_98_SMPTE296 23 |
| #define NV_CTRL_GVO_VIDEO_FORMAT_1080PSF_25_00_SMPTE274 24 |
| #define NV_CTRL_GVO_VIDEO_FORMAT_1080PSF_29_97_SMPTE274 25 |
| #define NV_CTRL_GVO_VIDEO_FORMAT_1080PSF_30_00_SMPTE274 26 |
| #define NV_CTRL_GVO_VIDEO_FORMAT_1080PSF_24_00_SMPTE274 27 |
| #define NV_CTRL_GVO_VIDEO_FORMAT_1080PSF_23_98_SMPTE274 28 |
| #define NV_CTRL_GVO_VIDEO_FORMAT_2048P_30_00_SMPTE372 29 |
| #define NV_CTRL_GVO_VIDEO_FORMAT_2048P_29_97_SMPTE372 30 |
| #define NV_CTRL_GVO_VIDEO_FORMAT_2048I_60_00_SMPTE372 31 |
| #define NV_CTRL_GVO_VIDEO_FORMAT_2048I_59_94_SMPTE372 32 |
| #define NV_CTRL_GVO_VIDEO_FORMAT_2048P_25_00_SMPTE372 33 |
| #define NV_CTRL_GVO_VIDEO_FORMAT_2048I_50_00_SMPTE372 34 |
| #define NV_CTRL_GVO_VIDEO_FORMAT_2048P_24_00_SMPTE372 35 |
| #define NV_CTRL_GVO_VIDEO_FORMAT_2048P_23_98_SMPTE372 36 |
| #define NV_CTRL_GVO_VIDEO_FORMAT_2048I_48_00_SMPTE372 37 |
| #define NV_CTRL_GVO_VIDEO_FORMAT_2048I_47_96_SMPTE372 38 |
| |
| /* |
| * NV_CTRL_GVIO_DETECTED_VIDEO_FORMAT - indicates the input video format |
| * detected for GVO or GVI devices; the possible values are the |
| * NV_CTRL_GVIO_VIDEO_FORMAT constants. |
| * |
| * For GVI devices, the jack number should be specified in the lower |
| * 16 bits of the "display_mask" parameter, while the channel number should be |
| * specified in the upper 16 bits. |
| */ |
| |
| #define NV_CTRL_GVIO_DETECTED_VIDEO_FORMAT 71 /* R--I */ |
| |
| /* |
| * The following is deprecated. Use NV_CTRL_GVIO_DETECTED_VIDEO_FORMAT, |
| * instead. |
| */ |
| #define NV_CTRL_GVO_INPUT_VIDEO_FORMAT 71 /* R-- */ |
| |
| /* |
| * NV_CTRL_GVO_DATA_FORMAT - This controls how the data in the source |
| * (either the X screen or the GLX pbuffer) is interpretted and |
| * displayed. |
| * |
| * Note: some of the below DATA_FORMATS have been renamed. For |
| * example, R8G8B8_TO_RGB444 has been renamed to X8X8X8_444_PASSTHRU. |
| * This is to more accurately reflect DATA_FORMATS where the |
| * per-channel data could be either RGB or YCrCb -- the point is that |
| * the driver and GVO hardware do not perform any implicit color space |
| * conversion on the data; it is passed through to the SDI out. |
| */ |
| |
| #define NV_CTRL_GVO_DATA_FORMAT 72 /* RW- */ |
| #define NV_CTRL_GVO_DATA_FORMAT_R8G8B8_TO_YCRCB444 0 |
| #define NV_CTRL_GVO_DATA_FORMAT_R8G8B8A8_TO_YCRCBA4444 1 |
| #define NV_CTRL_GVO_DATA_FORMAT_R8G8B8Z10_TO_YCRCBZ4444 2 |
| #define NV_CTRL_GVO_DATA_FORMAT_R8G8B8_TO_YCRCB422 3 |
| #define NV_CTRL_GVO_DATA_FORMAT_R8G8B8A8_TO_YCRCBA4224 4 |
| #define NV_CTRL_GVO_DATA_FORMAT_R8G8B8Z10_TO_YCRCBZ4224 5 |
| #define NV_CTRL_GVO_DATA_FORMAT_R8G8B8_TO_RGB444 6 // renamed |
| #define NV_CTRL_GVO_DATA_FORMAT_X8X8X8_444_PASSTHRU 6 |
| #define NV_CTRL_GVO_DATA_FORMAT_R8G8B8A8_TO_RGBA4444 7 // renamed |
| #define NV_CTRL_GVO_DATA_FORMAT_X8X8X8A8_4444_PASSTHRU 7 |
| #define NV_CTRL_GVO_DATA_FORMAT_R8G8B8Z10_TO_RGBZ4444 8 // renamed |
| #define NV_CTRL_GVO_DATA_FORMAT_X8X8X8Z8_4444_PASSTHRU 8 |
| #define NV_CTRL_GVO_DATA_FORMAT_Y10CR10CB10_TO_YCRCB444 9 // renamed |
| #define NV_CTRL_GVO_DATA_FORMAT_X10X10X10_444_PASSTHRU 9 |
| #define NV_CTRL_GVO_DATA_FORMAT_Y10CR8CB8_TO_YCRCB444 10 // renamed |
| #define NV_CTRL_GVO_DATA_FORMAT_X10X8X8_444_PASSTHRU 10 |
| #define NV_CTRL_GVO_DATA_FORMAT_Y10CR8CB8A10_TO_YCRCBA4444 11 // renamed |
| #define NV_CTRL_GVO_DATA_FORMAT_X10X8X8A10_4444_PASSTHRU 11 |
| #define NV_CTRL_GVO_DATA_FORMAT_Y10CR8CB8Z10_TO_YCRCBZ4444 12 // renamed |
| #define NV_CTRL_GVO_DATA_FORMAT_X10X8X8Z10_4444_PASSTHRU 12 |
| #define NV_CTRL_GVO_DATA_FORMAT_DUAL_R8G8B8_TO_DUAL_YCRCB422 13 |
| #define NV_CTRL_GVO_DATA_FORMAT_DUAL_Y8CR8CB8_TO_DUAL_YCRCB422 14 // renamed |
| #define NV_CTRL_GVO_DATA_FORMAT_DUAL_X8X8X8_TO_DUAL_422_PASSTHRU 14 |
| #define NV_CTRL_GVO_DATA_FORMAT_R10G10B10_TO_YCRCB422 15 |
| #define NV_CTRL_GVO_DATA_FORMAT_R10G10B10_TO_YCRCB444 16 |
| #define NV_CTRL_GVO_DATA_FORMAT_Y12CR12CB12_TO_YCRCB444 17 // renamed |
| #define NV_CTRL_GVO_DATA_FORMAT_X12X12X12_444_PASSTHRU 17 |
| #define NV_CTRL_GVO_DATA_FORMAT_R12G12B12_TO_YCRCB444 18 |
| #define NV_CTRL_GVO_DATA_FORMAT_X8X8X8_422_PASSTHRU 19 |
| #define NV_CTRL_GVO_DATA_FORMAT_X8X8X8A8_4224_PASSTHRU 20 |
| #define NV_CTRL_GVO_DATA_FORMAT_X8X8X8Z8_4224_PASSTHRU 21 |
| #define NV_CTRL_GVO_DATA_FORMAT_X10X10X10_422_PASSTHRU 22 |
| #define NV_CTRL_GVO_DATA_FORMAT_X10X8X8_422_PASSTHRU 23 |
| #define NV_CTRL_GVO_DATA_FORMAT_X10X8X8A10_4224_PASSTHRU 24 |
| #define NV_CTRL_GVO_DATA_FORMAT_X10X8X8Z10_4224_PASSTHRU 25 |
| #define NV_CTRL_GVO_DATA_FORMAT_X12X12X12_422_PASSTHRU 26 |
| #define NV_CTRL_GVO_DATA_FORMAT_R12G12B12_TO_YCRCB422 27 |
| |
| /* |
| * NV_CTRL_GVO_DISPLAY_X_SCREEN - no longer supported |
| */ |
| |
| #define NV_CTRL_GVO_DISPLAY_X_SCREEN 73 /* RW- */ |
| #define NV_CTRL_GVO_DISPLAY_X_SCREEN_ENABLE 1 |
| #define NV_CTRL_GVO_DISPLAY_X_SCREEN_DISABLE 0 |
| |
| /* |
| * NV_CTRL_GVO_COMPOSITE_SYNC_INPUT_DETECTED - indicates whether |
| * Composite Sync input is detected. |
| */ |
| |
| #define NV_CTRL_GVO_COMPOSITE_SYNC_INPUT_DETECTED 74 /* R-- */ |
| #define NV_CTRL_GVO_COMPOSITE_SYNC_INPUT_DETECTED_FALSE 0 |
| #define NV_CTRL_GVO_COMPOSITE_SYNC_INPUT_DETECTED_TRUE 1 |
| |
| /* |
| * NV_CTRL_GVO_COMPOSITE_SYNC_INPUT_DETECT_MODE - get/set the |
| * Composite Sync input detect mode. |
| */ |
| |
| #define NV_CTRL_GVO_COMPOSITE_SYNC_INPUT_DETECT_MODE 75 /* RW- */ |
| #define NV_CTRL_GVO_COMPOSITE_SYNC_INPUT_DETECT_MODE_AUTO 0 |
| #define NV_CTRL_GVO_COMPOSITE_SYNC_INPUT_DETECT_MODE_BI_LEVEL 1 |
| #define NV_CTRL_GVO_COMPOSITE_SYNC_INPUT_DETECT_MODE_TRI_LEVEL 2 |
| |
| /* |
| * NV_CTRL_GVO_SYNC_INPUT_DETECTED - indicates whether SDI Sync input |
| * is detected, and what type. |
| */ |
| |
| #define NV_CTRL_GVO_SDI_SYNC_INPUT_DETECTED 76 /* R-- */ |
| #define NV_CTRL_GVO_SDI_SYNC_INPUT_DETECTED_NONE 0 |
| #define NV_CTRL_GVO_SDI_SYNC_INPUT_DETECTED_HD 1 |
| #define NV_CTRL_GVO_SDI_SYNC_INPUT_DETECTED_SD 2 |
| |
| /* |
| * NV_CTRL_GVO_VIDEO_OUTPUTS - indicates which GVO video output |
| * connectors are currently outputing data. |
| */ |
| |
| #define NV_CTRL_GVO_VIDEO_OUTPUTS 77 /* R-- */ |
| #define NV_CTRL_GVO_VIDEO_OUTPUTS_NONE 0 |
| #define NV_CTRL_GVO_VIDEO_OUTPUTS_VIDEO1 1 |
| #define NV_CTRL_GVO_VIDEO_OUTPUTS_VIDEO2 2 |
| #define NV_CTRL_GVO_VIDEO_OUTPUTS_VIDEO_BOTH 3 |
| |
| /* |
| * NV_CTRL_GVO_FPGA_VERSION - indicates the version of the Firmware on |
| * the GVO device. Deprecated; use |
| * NV_CTRL_STRING_GVIO_FIRMWARE_VERSION instead. |
| */ |
| |
| #define NV_CTRL_GVO_FIRMWARE_VERSION 78 /* R-- */ |
| |
| /* |
| * NV_CTRL_GVO_SYNC_DELAY_PIXELS - controls the delay between the |
| * input sync and the output sync in numbers of pixels from hsync; |
| * this is a 12 bit value. |
| * |
| * If the NV_CTRL_GVO_CAPABILITIES_ADVANCE_SYNC_SKEW bit is set, |
| * then setting this value will set an advance instead of a delay. |
| */ |
| |
| #define NV_CTRL_GVO_SYNC_DELAY_PIXELS 79 /* RW- */ |
| |
| /* |
| * NV_CTRL_GVO_SYNC_DELAY_LINES - controls the delay between the input |
| * sync and the output sync in numbers of lines from vsync; this is a |
| * 12 bit value. |
| * |
| * If the NV_CTRL_GVO_CAPABILITIES_ADVANCE_SYNC_SKEW bit is set, |
| * then setting this value will set an advance instead of a delay. |
| */ |
| |
| #define NV_CTRL_GVO_SYNC_DELAY_LINES 80 /* RW- */ |
| |
| /* |
| * NV_CTRL_GVO_INPUT_VIDEO_FORMAT_REACQUIRE - must be set for a period |
| * of about 2 seconds for the new InputVideoFormat to be properly |
| * locked to. In nvidia-settings, we do a reacquire whenever genlock |
| * or frame lock mode is entered into, when the user clicks the |
| * "detect" button. This value can be written, but always reads back |
| * _FALSE. |
| */ |
| |
| #define NV_CTRL_GVO_INPUT_VIDEO_FORMAT_REACQUIRE 81 /* -W- */ |
| #define NV_CTRL_GVO_INPUT_VIDEO_FORMAT_REACQUIRE_FALSE 0 |
| #define NV_CTRL_GVO_INPUT_VIDEO_FORMAT_REACQUIRE_TRUE 1 |
| |
| /* |
| * NV_CTRL_GVO_GLX_LOCKED - indicates that GVO configurability is |
| * locked by GLX; this occurs when either glXGetVideoDeviceNV (part of |
| * GLX_NV_video_out) or glXBindVideoDeviceNV (part of |
| * GLX_NV_present_video) is called. All GVO output resources are |
| * locked until released by the GLX_NV_video_out/GLX_NV_present_video |
| * client. |
| * |
| * When GVO is locked, setting of the following GVO NV-CONTROL attributes will |
| * not happen immediately and will instead be cached. The GVO resource will |
| * need to be disabled/released and re-enabled/claimed for the values to be |
| * flushed. These attributes are: |
| * NV_CTRL_GVIO_REQUESTED_VIDEO_FORMAT |
| * NV_CTRL_GVO_DATA_FORMAT |
| * NV_CTRL_GVO_FLIP_QUEUE_SIZE |
| * |
| * This attribute is deprecated and may be removed in a future release. Its |
| * functionality has been replaced by NV_CTRL_GVO_LOCK_OWNER. |
| */ |
| |
| #define NV_CTRL_GVO_GLX_LOCKED 82 /* R-- */ |
| #define NV_CTRL_GVO_GLX_LOCKED_FALSE 0 |
| #define NV_CTRL_GVO_GLX_LOCKED_TRUE 1 |
| |
| /* |
| * NV_CTRL_GVIO_VIDEO_FORMAT_{WIDTH,HEIGHT,REFRESH_RATE} - query the |
| * width, height, and refresh rate for the specified |
| * NV_CTRL_GVIO_VIDEO_FORMAT_*. So that this can be queried with |
| * existing interfaces, XNVCTRLQueryAttribute() should be used, and |
| * the video format specified in the display_mask field; eg: |
| * |
| * XNVCTRLQueryAttribute (dpy, |
| * screen, |
| * NV_CTRL_GVIO_VIDEO_FORMAT_487I_59_94_SMPTE259_NTSC, |
| * NV_CTRL_GVIO_VIDEO_FORMAT_WIDTH, |
| * &value); |
| * |
| * Note that Refresh Rate is in milliHertz values |
| */ |
| |
| #define NV_CTRL_GVIO_VIDEO_FORMAT_WIDTH 83 /* R--I */ |
| #define NV_CTRL_GVIO_VIDEO_FORMAT_HEIGHT 84 /* R--I */ |
| #define NV_CTRL_GVIO_VIDEO_FORMAT_REFRESH_RATE 85 /* R--I */ |
| |
| /* The following are deprecated; use the NV_CTRL_GVIO_* versions, instead */ |
| #define NV_CTRL_GVO_VIDEO_FORMAT_WIDTH 83 /* R-- */ |
| #define NV_CTRL_GVO_VIDEO_FORMAT_HEIGHT 84 /* R-- */ |
| #define NV_CTRL_GVO_VIDEO_FORMAT_REFRESH_RATE 85 /* R-- */ |
| |
| /* |
| * NV_CTRL_GVO_X_SCREEN_PAN_[XY] - no longer supported |
| */ |
| |
| #define NV_CTRL_GVO_X_SCREEN_PAN_X 86 /* RW- */ |
| #define NV_CTRL_GVO_X_SCREEN_PAN_Y 87 /* RW- */ |
| |
| /* |
| * NV_CTRL_GPU_OVERCLOCKING_STATE - query the current or set a new |
| * overclocking state; the value of this attribute controls the |
| * availability of additional overclocking attributes (see below). |
| * |
| * Note: this attribute is unavailable unless overclocking support |
| * has been enabled in the X server (by the user). |
| */ |
| |
| #define NV_CTRL_GPU_OVERCLOCKING_STATE 88 /* RW-G */ |
| #define NV_CTRL_GPU_OVERCLOCKING_STATE_NONE 0 |
| #define NV_CTRL_GPU_OVERCLOCKING_STATE_MANUAL 1 |
| |
| /* |
| * NV_CTRL_GPU_{2,3}D_CLOCK_FREQS - query or set the GPU and memory |
| * clocks of the device driving the X screen. New clock frequencies |
| * are tested before being applied, and may be rejected. |
| * |
| * Note: if the target clocks are too aggressive, their testing may |
| * render the system unresponsive. |
| * |
| * Note: while this attribute can always be queried, it can't be set |
| * unless NV_CTRL_GPU_OVERCLOCKING_STATE is set to _MANUAL. Since |
| * the target clocks may be rejected, the requester should read this |
| * attribute after the set to determine success or failure. |
| * |
| * NV_CTRL_GPU_{2,3}D_CLOCK_FREQS are "packed" integer attributes; the |
| * GPU clock is stored in the upper 16 bits of the integer, and the |
| * memory clock is stored in the lower 16 bits of the integer. All |
| * clock values are in MHz. |
| */ |
| |
| #define NV_CTRL_GPU_2D_CLOCK_FREQS 89 /* RW-G */ |
| #define NV_CTRL_GPU_3D_CLOCK_FREQS 90 /* RW-G */ |
| |
| /* |
| * NV_CTRL_GPU_DEFAULT_{2,3}D_CLOCK_FREQS - query the default memory |
| * and GPU core clocks of the device driving the X screen. |
| * |
| * NV_CTRL_GPU_DEFAULT_{2,3}D_CLOCK_FREQS are "packed" integer |
| * attributes; the GPU clock is stored in the upper 16 bits of the |
| * integer, and the memory clock is stored in the lower 16 bits of the |
| * integer. All clock values are in MHz. |
| */ |
| |
| #define NV_CTRL_GPU_DEFAULT_2D_CLOCK_FREQS 91 /* R--G */ |
| #define NV_CTRL_GPU_DEFAULT_3D_CLOCK_FREQS 92 /* R--G */ |
| |
| /* |
| * NV_CTRL_GPU_CURRENT_CLOCK_FREQS - query the current GPU and memory |
| * clocks of the graphics device driving the X screen. |
| * |
| * NV_CTRL_GPU_CURRENT_CLOCK_FREQS is a "packed" integer attribute; |
| * the GPU clock is stored in the upper 16 bits of the integer, and |
| * the memory clock is stored in the lower 16 bits of the integer. |
| * All clock values are in MHz. All clock values are in MHz. |
| */ |
| |
| #define NV_CTRL_GPU_CURRENT_CLOCK_FREQS 93 /* R--G */ |
| |
| /* |
| * NV_CTRL_GPU_OPTIMAL_CLOCK_FREQS - Holds the last calculated |
| * optimal 3D clock frequencies found by the |
| * NV_CTRL_GPU_OPTIMAL_CLOCK_FREQS_DETECTION process. Querying this |
| * attribute before having probed for the optimal clocks will return |
| * NV_CTRL_GPU_OPTIMAL_CLOCK_FREQS_INVALID |
| * |
| * Note: unless NV_CTRL_GPU_OVERCLOCKING_STATE is set to _MANUAL, the |
| * optimal clock detection process is unavailable. |
| */ |
| |
| #define NV_CTRL_GPU_OPTIMAL_CLOCK_FREQS 94 /* R--G */ |
| #define NV_CTRL_GPU_OPTIMAL_CLOCK_FREQS_INVALID 0 |
| |
| /* |
| * NV_CTRL_GPU_OPTIMAL_CLOCK_FREQS_DETECTION - set to _START to |
| * initiate testing for the optimal 3D clock frequencies. Once |
| * found, the optimal clock frequencies will be returned by the |
| * NV_CTRL_GPU_OPTIMAL_CLOCK_FREQS attribute asynchronously |
| * (using an X event, see XNVCtrlSelectNotify). |
| * |
| * To cancel an ongoing test for the optimal clocks, set the |
| * NV_CTRL_GPU_OPTIMAL_CLOCK_FREQS_DETECTION attribute to _CANCEL |
| * |
| * Note: unless NV_CTRL_GPU_OVERCLOCKING_STATE is set to _MANUAL, the |
| * optimal clock detection process is unavailable. |
| */ |
| |
| #define NV_CTRL_GPU_OPTIMAL_CLOCK_FREQS_DETECTION 95 /* -W-G */ |
| #define NV_CTRL_GPU_OPTIMAL_CLOCK_FREQS_DETECTION_START 0 |
| #define NV_CTRL_GPU_OPTIMAL_CLOCK_FREQS_DETECTION_CANCEL 1 |
| |
| /* |
| * NV_CTRL_GPU_OPTIMAL_CLOCK_FREQS_DETECTION_STATE - query this |
| * variable to know if a test is currently being run to |
| * determine the optimal 3D clock frequencies. _BUSY means a |
| * test is currently running, _IDLE means the test is not running. |
| * |
| * Note: unless NV_CTRL_GPU_OVERCLOCKING_STATE is set to _MANUAL, the |
| * optimal clock detection process is unavailable. |
| */ |
| |
| #define NV_CTRL_GPU_OPTIMAL_CLOCK_FREQS_DETECTION_STATE 96 /* R--G */ |
| #define NV_CTRL_GPU_OPTIMAL_CLOCK_FREQS_DETECTION_STATE_IDLE 0 |
| #define NV_CTRL_GPU_OPTIMAL_CLOCK_FREQS_DETECTION_STATE_BUSY 1 |
| |
| /* |
| * NV_CTRL_FLATPANEL_CHIP_LOCATION - for the specified display device, |
| * report whether the flat panel is driven by the on-chip controller, |
| * or a separate controller chip elsewhere on the graphics board. |
| * This attribute is only available for flat panels. |
| */ |
| |
| #define NV_CTRL_FLATPANEL_CHIP_LOCATION 215 /* R-DG */ |
| #define NV_CTRL_FLATPANEL_CHIP_LOCATION_INTERNAL 0 |
| #define NV_CTRL_FLATPANEL_CHIP_LOCATION_EXTERNAL 1 |
| |
| /* |
| * NV_CTRL_FLATPANEL_LINK - report the number of links for a DVI connection, or |
| * the main link's active lane count for DisplayPort. |
| * This attribute is only available for flat panels. |
| */ |
| |
| #define NV_CTRL_FLATPANEL_LINK 216 /* R-DG */ |
| #define NV_CTRL_FLATPANEL_LINK_SINGLE 0 |
| #define NV_CTRL_FLATPANEL_LINK_DUAL 1 |
| #define NV_CTRL_FLATPANEL_LINK_QUAD 3 |
| |
| /* |
| * NV_CTRL_FLATPANEL_SIGNAL - for the specified display device, report |
| * whether the flat panel is driven by an LVDS, TMDS, or DisplayPort signal. |
| * This attribute is only available for flat panels. |
| */ |
| |
| #define NV_CTRL_FLATPANEL_SIGNAL 217 /* R-DG */ |
| #define NV_CTRL_FLATPANEL_SIGNAL_LVDS 0 |
| #define NV_CTRL_FLATPANEL_SIGNAL_TMDS 1 |
| #define NV_CTRL_FLATPANEL_SIGNAL_DISPLAYPORT 2 |
| |
| /* |
| * NV_CTRL_USE_HOUSE_SYNC - when TRUE, the server (master) frame lock |
| * device will propagate the incoming house sync signal as the outgoing |
| * frame lock sync signal. If the frame lock device cannot detect a |
| * frame lock sync signal, it will default to using the internal timings |
| * from the GPU connected to the primary connector. |
| * |
| * This attribute may be queried through XNVCTRLQueryTargetAttribute() |
| * using a NV_CTRL_TARGET_TYPE_FRAMELOCK or NV_CTRL_TARGET_TYPE_X_SCREEN |
| * target. |
| */ |
| |
| #define NV_CTRL_USE_HOUSE_SYNC 218 /* RW-F */ |
| #define NV_CTRL_USE_HOUSE_SYNC_FALSE 0 |
| #define NV_CTRL_USE_HOUSE_SYNC_TRUE 1 |
| |
| /* |
| * NV_CTRL_EDID_AVAILABLE - report if an EDID is available for the |
| * specified display device. |
| * |
| * This attribute may also be queried through XNVCTRLQueryTargetAttribute() |
| * using a NV_CTRL_TARGET_TYPE_GPU or NV_CTRL_TARGET_TYPE_X_SCREEN |
| * target. |
| */ |
| |
| #define NV_CTRL_EDID_AVAILABLE 219 /* R-DG */ |
| #define NV_CTRL_EDID_AVAILABLE_FALSE 0 |
| #define NV_CTRL_EDID_AVAILABLE_TRUE 1 |
| |
| /* |
| * NV_CTRL_FORCE_STEREO - when TRUE, OpenGL will force stereo flipping |
| * even when no stereo drawables are visible (if the device is configured |
| * to support it, see the "Stereo" X config option). |
| * When false, fall back to the default behavior of only flipping when a |
| * stereo drawable is visible. |
| */ |
| |
| #define NV_CTRL_FORCE_STEREO 220 /* RW- */ |
| #define NV_CTRL_FORCE_STEREO_FALSE 0 |
| #define NV_CTRL_FORCE_STEREO_TRUE 1 |
| |
| /* |
| * NV_CTRL_IMAGE_SETTINGS - the image quality setting for OpenGL clients. |
| * |
| * This setting is only applied to OpenGL clients that are started |
| * after this setting is applied. |
| */ |
| |
| #define NV_CTRL_IMAGE_SETTINGS 221 /* RW-X */ |
| #define NV_CTRL_IMAGE_SETTINGS_HIGH_QUALITY 0 |
| #define NV_CTRL_IMAGE_SETTINGS_QUALITY 1 |
| #define NV_CTRL_IMAGE_SETTINGS_PERFORMANCE 2 |
| #define NV_CTRL_IMAGE_SETTINGS_HIGH_PERFORMANCE 3 |
| |
| /* |
| * NV_CTRL_XINERAMA - return whether xinerama is enabled |
| */ |
| |
| #define NV_CTRL_XINERAMA 222 /* R--G */ |
| #define NV_CTRL_XINERAMA_OFF 0 |
| #define NV_CTRL_XINERAMA_ON 1 |
| |
| /* |
| * NV_CTRL_XINERAMA_STEREO - when TRUE, OpenGL will allow stereo flipping |
| * on multiple X screens configured with Xinerama. |
| * When FALSE, flipping is allowed only on one X screen at a time. |
| */ |
| |
| #define NV_CTRL_XINERAMA_STEREO 223 /* RW- */ |
| #define NV_CTRL_XINERAMA_STEREO_FALSE 0 |
| #define NV_CTRL_XINERAMA_STEREO_TRUE 1 |
| |
| /* |
| * NV_CTRL_BUS_RATE - if the bus type of the specified device is AGP, then |
| * NV_CTRL_BUS_RATE returns the configured AGP transfer rate. If the bus type |
| * is PCI Express, then this attribute returns the maximum link width. |
| * When this attribute is queried on an X screen target, the bus rate of the |
| * GPU driving the X screen is returned. |
| */ |
| |
| #define NV_CTRL_BUS_RATE 224 /* R--GI */ |
| |
| /* |
| * NV_CTRL_GPU_PCIE_MAX_LINK_WIDTH - returns the maximum |
| * PCIe link width, in number of lanes. |
| */ |
| #define NV_CTRL_GPU_PCIE_MAX_LINK_WIDTH NV_CTRL_BUS_RATE |
| |
| /* |
| * NV_CTRL_SHOW_SLI_HUD - when TRUE, OpenGL will draw information about the |
| * current SLI mode. |
| * Renamed this attribute to NV_CTRL_SHOW_SLI_VISUAL_INDICATOR |
| */ |
| |
| #define NV_CTRL_SHOW_SLI_HUD NV_CTRL_SHOW_SLI_VISUAL_INDICATOR |
| #define NV_CTRL_SHOW_SLI_HUD_FALSE NV_CTRL_SHOW_SLI_VISUAL_INDICATOR_FALSE |
| #define NV_CTRL_SHOW_SLI_HUD_TRUE NV_CTRL_SHOW_SLI_VISUAL_INDICATOR_TRUE |
| |
| /* |
| * NV_CTRL_SHOW_SLI_VISUAL_INDICATOR - when TRUE, OpenGL will draw information |
| * about the current SLI mode. |
| */ |
| |
| #define NV_CTRL_SHOW_SLI_VISUAL_INDICATOR 225 /* RW-X */ |
| #define NV_CTRL_SHOW_SLI_VISUAL_INDICATOR_FALSE 0 |
| #define NV_CTRL_SHOW_SLI_VISUAL_INDICATOR_TRUE 1 |
| |
| /* |
| * NV_CTRL_XV_SYNC_TO_DISPLAY - this control is valid when TwinView and |
| * XVideo Sync To VBlank are enabled. |
| * It controls which display device will be synched to. |
| */ |
| |
| #define NV_CTRL_XV_SYNC_TO_DISPLAY 226 /* RW- */ |
| |
| /* |
| * NV_CTRL_GVIO_REQUESTED_VIDEO_FORMAT2 - this attribute is only |
| * intended to be used to query the ValidValues for |
| * NV_CTRL_GVIO_REQUESTED_VIDEO_FORMAT for VIDEO_FORMAT values between |
| * 31 and 63. See NV_CTRL_GVIO_REQUESTED_VIDEO_FORMAT for details. |
| */ |
| |
| #define NV_CTRL_GVIO_REQUESTED_VIDEO_FORMAT2 227 /* ---GI */ |
| |
| /* |
| * The following is deprecated; use NV_CTRL_GVIO_REQUESTED_VIDEO_FORMAT2, |
| * instead |
| */ |
| #define NV_CTRL_GVO_OUTPUT_VIDEO_FORMAT2 227 /* --- */ |
| |
| /* |
| * NV_CTRL_GVO_OVERRIDE_HW_CSC - Override the SDI hardware's Color Space |
| * Conversion with the values controlled through |
| * XNVCTRLSetGvoColorConversion() and XNVCTRLGetGvoColorConversion(). If |
| * this attribute is FALSE, then the values specified through |
| * XNVCTRLSetGvoColorConversion() are ignored. |
| */ |
| |
| #define NV_CTRL_GVO_OVERRIDE_HW_CSC 228 /* RW- */ |
| #define NV_CTRL_GVO_OVERRIDE_HW_CSC_FALSE 0 |
| #define NV_CTRL_GVO_OVERRIDE_HW_CSC_TRUE 1 |
| |
| /* |
| * NV_CTRL_GVO_CAPABILITIES - this read-only attribute describes GVO |
| * capabilities that differ between NVIDIA SDI products. This value |
| * is a bitmask where each bit indicates whether that capability is |
| * available. |
| * |
| * APPLY_CSC_IMMEDIATELY - whether the CSC matrix, offset, and scale |
| * specified through XNVCTRLSetGvoColorConversion() will take affect |
| * immediately, or only after SDI output is disabled and enabled |
| * again. |
| * |
| * APPLY_CSC_TO_X_SCREEN - whether the CSC matrix, offset, and scale |
| * specified through XNVCTRLSetGvoColorConversion() will also apply |
| * to GVO output of an X screen, or only to OpenGL GVO output, as |
| * enabled through the GLX_NV_video_out extension. |
| * |
| * COMPOSITE_TERMINATION - whether the 75 ohm termination of the |
| * SDI composite input signal can be programmed through the |
| * NV_CTRL_GVO_COMPOSITE_TERMINATION attribute. |
| * |
| * SHARED_SYNC_BNC - whether the SDI device has a single BNC |
| * connector used for both (SDI & Composite) incoming signals. |
| * |
| * MULTIRATE_SYNC - whether the SDI device supports synchronization |
| * of input and output video modes that match in being odd or even |
| * modes (ie, AA.00 Hz modes can be synched to other BB.00 Hz modes and |
| * AA.XX Hz can match to BB.YY Hz where .XX and .YY are not .00) |
| */ |
| |
| #define NV_CTRL_GVO_CAPABILITIES 229 /* R-- */ |
| #define NV_CTRL_GVO_CAPABILITIES_APPLY_CSC_IMMEDIATELY 0x00000001 |
| #define NV_CTRL_GVO_CAPABILITIES_APPLY_CSC_TO_X_SCREEN 0x00000002 |
| #define NV_CTRL_GVO_CAPABILITIES_COMPOSITE_TERMINATION 0x00000004 |
| #define NV_CTRL_GVO_CAPABILITIES_SHARED_SYNC_BNC 0x00000008 |
| #define NV_CTRL_GVO_CAPABILITIES_MULTIRATE_SYNC 0x00000010 |
| #define NV_CTRL_GVO_CAPABILITIES_ADVANCE_SYNC_SKEW 0x00000020 |
| |
| /* |
| * NV_CTRL_GVO_COMPOSITE_TERMINATION - enable or disable 75 ohm |
| * termination of the SDI composite input signal. |
| */ |
| |
| #define NV_CTRL_GVO_COMPOSITE_TERMINATION 230 /* RW- */ |
| #define NV_CTRL_GVO_COMPOSITE_TERMINATION_ENABLE 1 |
| #define NV_CTRL_GVO_COMPOSITE_TERMINATION_DISABLE 0 |
| |
| /* |
| * NV_CTRL_ASSOCIATED_DISPLAY_DEVICES - display device mask indicating |
| * which display devices are "associated" with the specified X screen |
| * (ie: are available to the X screen for displaying the X screen). |
| */ |
| |
| #define NV_CTRL_ASSOCIATED_DISPLAY_DEVICES 231 /* RW- */ |
| |
| /* |
| * NV_CTRL_FRAMELOCK_SLAVES - get/set whether the display device(s) |
| * given should listen or ignore the master's sync signal. |
| * |
| * This attribute can only be queried through XNVCTRLQueryTargetAttribute() |
| * using a NV_CTRL_TARGET_TYPE_GPU target. This attribute cannot be |
| * queried using a NV_CTRL_TARGET_TYPE_X_SCREEN. |
| */ |
| |
| #define NV_CTRL_FRAMELOCK_SLAVES 232 /* RW-G */ |
| |
| /* |
| * NV_CTRL_FRAMELOCK_MASTERABLE - Can any of the given display devices |
| * be set as master of the frame lock group. Returns a bitmask of the |
| * corresponding display devices that can be set as master. |
| * |
| * This attribute can only be queried through XNVCTRLQueryTargetAttribute() |
| * using a NV_CTRL_TARGET_TYPE_GPU target. This attribute cannot be |
| * queried using a NV_CTRL_TARGET_TYPE_X_SCREEN. |
| */ |
| |
| #define NV_CTRL_FRAMELOCK_MASTERABLE 233 /* R-DG */ |
| |
| /* |
| * NV_CTRL_PROBE_DISPLAYS - re-probes the hardware to detect what |
| * display devices are connected to the GPU or GPU driving the |
| * specified X screen. Returns a display mask. |
| * |
| * This attribute may be queried through XNVCTRLQueryTargetAttribute() |
| * using a NV_CTRL_TARGET_TYPE_GPU or NV_CTRL_TARGET_TYPE_X_SCREEN target. |
| */ |
| |
| #define NV_CTRL_PROBE_DISPLAYS 234 /* R--G */ |
| |
| /* |
| * NV_CTRL_REFRESH_RATE - Returns the refresh rate of the specified |
| * display device in 100 * Hz (ie. to get the refresh rate in Hz, divide |
| * the returned value by 100.) |
| * |
| * This attribute may be queried through XNVCTRLQueryTargetAttribute() |
| * using a NV_CTRL_TARGET_TYPE_GPU or NV_CTRL_TARGET_TYPE_X_SCREEN target. |
| */ |
| |
| #define NV_CTRL_REFRESH_RATE 235 /* R-DG */ |
| |
| /* |
| * NV_CTRL_GVO_FLIP_QUEUE_SIZE - The Graphics to Video Out interface |
| * exposed through NV-CONTROL and the GLX_NV_video_out extension uses |
| * an internal flip queue when pbuffers are sent to the video device |
| * (via glXSendPbufferToVideoNV()). The NV_CTRL_GVO_FLIP_QUEUE_SIZE |
| * can be used to query and assign the flip queue size. This |
| * attribute is applied to GLX when glXGetVideoDeviceNV() is called by |
| * the application. |
| */ |
| |
| #define NV_CTRL_GVO_FLIP_QUEUE_SIZE 236 /* RW- */ |
| |
| /* |
| * NV_CTRL_CURRENT_SCANLINE - query the current scanline for the |
| * specified display device. |
| */ |
| |
| #define NV_CTRL_CURRENT_SCANLINE 237 /* R-DG */ |
| |
| /* |
| * NV_CTRL_INITIAL_PIXMAP_PLACEMENT - Controls where X pixmaps are initially |
| * created. |
| * |
| * NV_CTRL_INITIAL_PIXMAP_PLACEMENT_FORCE_SYSMEM causes pixmaps to stay in |
| * system memory. These pixmaps can't be accelerated by the NVIDIA driver; this |
| * will cause blank windows if used with an OpenGL compositing manager. |
| * NV_CTRL_INITIAL_PIXMAP_PLACEMENT_SYSMEM creates pixmaps in system memory |
| * initially, but allows them to migrate to video memory. |
| * NV_CTRL_INITIAL_PIXMAP_PLACEMENT_VIDMEM creates pixmaps in video memory |
| * when enough resources are available. |
| * NV_CTRL_INITIAL_PIXMAP_PLACEMENT_RESERVED is currently reserved for future |
| * use. Behavior is undefined. |
| * NV_CTRL_INITIAL_PIXMAP_PLACEMENT_GPU_SYSMEM creates pixmaps in GPU accessible |
| * system memory when enough resources are available. |
| */ |
| |
| #define NV_CTRL_INITIAL_PIXMAP_PLACEMENT 238 /* RW- */ |
| #define NV_CTRL_INITIAL_PIXMAP_PLACEMENT_FORCE_SYSMEM 0 |
| #define NV_CTRL_INITIAL_PIXMAP_PLACEMENT_SYSMEM 1 |
| #define NV_CTRL_INITIAL_PIXMAP_PLACEMENT_VIDMEM 2 |
| #define NV_CTRL_INITIAL_PIXMAP_PLACEMENT_RESERVED 3 |
| #define NV_CTRL_INITIAL_PIXMAP_PLACEMENT_GPU_SYSMEM 4 |
| |
| /* |
| * NV_CTRL_PCI_BUS - Returns the PCI bus number the specified device is using. |
| */ |
| |
| #define NV_CTRL_PCI_BUS 239 /* R--GI */ |
| |
| /* |
| * NV_CTRL_PCI_DEVICE - Returns the PCI device number the specified device is |
| * using. |
| */ |
| |
| #define NV_CTRL_PCI_DEVICE 240 /* R--GI */ |
| |
| /* |
| * NV_CTRL_PCI_FUNCTION - Returns the PCI function number the specified device |
| * is using. |
| */ |
| |
| #define NV_CTRL_PCI_FUNCTION 241 /* R--GI */ |
| |
| /* |
| * NV_CTRL_FRAMELOCK_FPGA_REVISION - Querys the FPGA revision of the |
| * Frame Lock device. |
| * |
| * This attribute must be queried through XNVCTRLQueryTargetAttribute() |
| * using a NV_CTRL_TARGET_TYPE_FRAMELOCK target. |
| */ |
| |
| #define NV_CTRL_FRAMELOCK_FPGA_REVISION 242 /* R--F */ |
| |
| /* |
| * NV_CTRL_MAX_SCREEN_{WIDTH,HEIGHT} - the maximum allowable size, in |
| * pixels, of either the specified X screen (if the target_type of the |
| * query is an X screen), or any X screen on the specified GPU (if the |
| * target_type of the query is a GPU). |
| */ |
| |
| #define NV_CTRL_MAX_SCREEN_WIDTH 243 /* R--G */ |
| #define NV_CTRL_MAX_SCREEN_HEIGHT 244 /* R--G */ |
| |
| /* |
| * NV_CTRL_MAX_DISPLAYS - the maximum number of display devices that |
| * can be driven simultaneously on a GPU (e.g., that can be used in a |
| * MetaMode at once). Note that this does not indicate the maximum |
| * number of bits that can be set in NV_CTRL_CONNECTED_DISPLAYS, |
| * because more display devices can be connected than are actively in |
| * use. |
| */ |
| |
| #define NV_CTRL_MAX_DISPLAYS 245 /* R--G */ |
| |
| /* |
| * NV_CTRL_DYNAMIC_TWINVIEW - Returns whether or not the screen |
| * supports dynamic twinview. |
| */ |
| |
| #define NV_CTRL_DYNAMIC_TWINVIEW 246 /* R-- */ |
| |
| /* |
| * NV_CTRL_MULTIGPU_DISPLAY_OWNER - Returns the (NV-CONTROL) GPU ID of |
| * the GPU that has the display device(s) used for showing the X Screen. |
| */ |
| |
| #define NV_CTRL_MULTIGPU_DISPLAY_OWNER 247 /* R-- */ |
| |
| /* |
| * NV_CTRL_GPU_SCALING - not supported |
| */ |
| |
| #define NV_CTRL_GPU_SCALING 248 /* RWDG */ |
| |
| #define NV_CTRL_GPU_SCALING_TARGET_INVALID 0 |
| #define NV_CTRL_GPU_SCALING_TARGET_FLATPANEL_BEST_FIT 1 |
| #define NV_CTRL_GPU_SCALING_TARGET_FLATPANEL_NATIVE 2 |
| |
| #define NV_CTRL_GPU_SCALING_METHOD_INVALID 0 |
| #define NV_CTRL_GPU_SCALING_METHOD_STRETCHED 1 |
| #define NV_CTRL_GPU_SCALING_METHOD_CENTERED 2 |
| #define NV_CTRL_GPU_SCALING_METHOD_ASPECT_SCALED 3 |
| |
| /* |
| * NV_CTRL_FRONTEND_RESOLUTION - not supported |
| */ |
| |
| #define NV_CTRL_FRONTEND_RESOLUTION 249 /* R-DG */ |
| |
| /* |
| * NV_CTRL_BACKEND_RESOLUTION - not supported |
| */ |
| |
| #define NV_CTRL_BACKEND_RESOLUTION 250 /* R-DG */ |
| |
| /* |
| * NV_CTRL_FLATPANEL_NATIVE_RESOLUTION - Returns the dimensions of the |
| * native resolution of the flat panel as determined by the |
| * NVIDIA X Driver. |
| * |
| * The native resolution is the resolution at which a flat panel |
| * must display any image. All other resolutions must be scaled to this |
| * resolution through GPU scaling or the DFP's native scaling capabilities |
| * in order to be displayed. |
| * |
| * This attribute is only valid for flat panel (DFP) display devices. |
| * |
| * This attribute is a packed integer; the width is packed in the upper |
| * 16-bits and the height is packed in the lower 16-bits. |
| */ |
| |
| #define NV_CTRL_FLATPANEL_NATIVE_RESOLUTION 251 /* R-DG */ |
| |
| /* |
| * NV_CTRL_FLATPANEL_BEST_FIT_RESOLUTION - not supported |
| */ |
| |
| #define NV_CTRL_FLATPANEL_BEST_FIT_RESOLUTION 252 /* R-DG */ |
| |
| /* |
| * NV_CTRL_GPU_SCALING_ACTIVE - not supported |
| */ |
| |
| #define NV_CTRL_GPU_SCALING_ACTIVE 253 /* R-DG */ |
| |
| /* |
| * NV_CTRL_DFP_SCALING_ACTIVE - not supported |
| */ |
| |
| #define NV_CTRL_DFP_SCALING_ACTIVE 254 /* R-DG */ |
| |
| /* |
| * NV_CTRL_FSAA_APPLICATION_ENHANCED - Controls how the NV_CTRL_FSAA_MODE |
| * is applied when NV_CTRL_FSAA_APPLICATION_CONTROLLED is set to |
| * NV_CTRL_APPLICATION_CONTROLLED_DISABLED. When |
| * NV_CTRL_FSAA_APPLICATION_ENHANCED is _DISABLED, OpenGL applications will |
| * be forced to use the FSAA mode specified by NV_CTRL_FSAA_MODE. when set |
| * to _ENABLED, only those applications that have selected a multisample |
| * FBConfig will be made to use the NV_CTRL_FSAA_MODE specified. |
| * |
| * This attribute is ignored when NV_CTRL_FSAA_APPLICATION_CONTROLLED is |
| * set to NV_CTRL_FSAA_APPLICATION_CONTROLLED_ENABLED. |
| */ |
| |
| #define NV_CTRL_FSAA_APPLICATION_ENHANCED 255 /* RW-X */ |
| #define NV_CTRL_FSAA_APPLICATION_ENHANCED_ENABLED 1 |
| #define NV_CTRL_FSAA_APPLICATION_ENHANCED_DISABLED 0 |
| |
| /* |
| * NV_CTRL_FRAMELOCK_SYNC_RATE_4 - This is the refresh rate that the |
| * frame lock board is sending to the GPU with 4 digits of precision. |
| * |
| * This attribute may be queried through XNVCTRLQueryTargetAttribute() |
| * using a NV_CTRL_TARGET_TYPE_FRAMELOCK. |
| */ |
| |
| #define NV_CTRL_FRAMELOCK_SYNC_RATE_4 256 /* R--F */ |
| |
| /* |
| * NV_CTRL_GVO_LOCK_OWNER - indicates that the GVO device is available |
| * or in use (by GLX or an X screen). |
| * |
| * The GVO device is locked by GLX when either glXGetVideoDeviceNV |
| * (part of GLX_NV_video_out) or glXBindVideoDeviceNV (part of |
| * GLX_NV_present_video) is called. All GVO output resources are |
| * locked until released by the GLX_NV_video_out/GLX_NV_present_video |
| * client. |
| * |
| * The GVO device is locked/unlocked by an X screen, when the GVO device is |
| * used in a MetaMode on an X screen. |
| * |
| * When the GVO device is locked, setting of the following GVO NV-CONTROL |
| * attributes will not happen immediately and will instead be cached. The |
| * GVO resource will need to be disabled/released and re-enabled/claimed for |
| * the values to be flushed. These attributes are: |
| * |
| * NV_CTRL_GVIO_REQUESTED_VIDEO_FORMAT |
| * NV_CTRL_GVO_DATA_FORMAT |
| * NV_CTRL_GVO_FLIP_QUEUE_SIZE |
| */ |
| |
| #define NV_CTRL_GVO_LOCK_OWNER 257 /* R-- */ |
| #define NV_CTRL_GVO_LOCK_OWNER_NONE 0 |
| #define NV_CTRL_GVO_LOCK_OWNER_GLX 1 |
| #define NV_CTRL_GVO_LOCK_OWNER_CLONE /* no longer supported */ 2 |
| #define NV_CTRL_GVO_LOCK_OWNER_X_SCREEN 3 |
| |
| /* |
| * NV_CTRL_HWOVERLAY - when a workstation overlay is in use, reports |
| * whether the hardware overlay is used, or if the overlay is emulated. |
| */ |
| |
| #define NV_CTRL_HWOVERLAY 258 /* R-- */ |
| #define NV_CTRL_HWOVERLAY_FALSE 0 |
| #define NV_CTRL_HWOVERLAY_TRUE 1 |
| |
| /* |
| * NV_CTRL_NUM_GPU_ERRORS_RECOVERED - Returns the number of GPU errors |
| * occured. This attribute may be queried through XNVCTRLQueryTargetAttribute() |
| * using a NV_CTRL_TARGET_TYPE_X_SCREEN target. |
| */ |
| |
| #define NV_CTRL_NUM_GPU_ERRORS_RECOVERED 259 /* R--- */ |
| |
| /* |
| * NV_CTRL_REFRESH_RATE_3 - Returns the refresh rate of the specified |
| * display device in 1000 * Hz (ie. to get the refresh rate in Hz, divide |
| * the returned value by 1000.) |
| * |
| * This attribute may be queried through XNVCTRLQueryTargetAttribute() |
| * using a NV_CTRL_TARGET_TYPE_GPU or NV_CTRL_TARGET_TYPE_X_SCREEN target. |
| */ |
| |
| #define NV_CTRL_REFRESH_RATE_3 260 /* R-DG */ |
| |
| /* |
| * NV_CTRL_ONDEMAND_VBLANK_INTERRUPTS - if the OnDemandVBlankInterrupts |
| * X driver option is set to true, this attribute can be used to |
| * determine if on-demand VBlank interrupt control is enabled on the |
| * specified GPU, as well as to enable or disable this feature. |
| */ |
| |
| #define NV_CTRL_ONDEMAND_VBLANK_INTERRUPTS 261 /* RW-G */ |
| #define NV_CTRL_ONDEMAND_VBLANK_INTERRUPTS_OFF 0 |
| #define NV_CTRL_ONDEMAND_VBLANK_INTERRUPTS_ON 1 |
| |
| /* |
| * NV_CTRL_GPU_POWER_SOURCE reports the type of power source |
| * of the GPU driving the X screen. |
| */ |
| |
| #define NV_CTRL_GPU_POWER_SOURCE 262 /* R--G */ |
| #define NV_CTRL_GPU_POWER_SOURCE_AC 0 |
| #define NV_CTRL_GPU_POWER_SOURCE_BATTERY 1 |
| |
| /* |
| * NV_CTRL_GPU_CURRENT_PERFORMANCE_MODE is deprecated |
| */ |
| |
| #define NV_CTRL_GPU_CURRENT_PERFORMANCE_MODE 263 /* R--G */ |
| #define NV_CTRL_GPU_CURRENT_PERFORMANCE_MODE_DESKTOP 0 |
| #define NV_CTRL_GPU_CURRENT_PERFORMANCE_MODE_MAXPERF 1 |
| |
| /* NV_CTRL_GLYPH_CACHE - Enables RENDER Glyph Caching to VRAM */ |
| |
| #define NV_CTRL_GLYPH_CACHE 264 /* RW- */ |
| #define NV_CTRL_GLYPH_CACHE_DISABLED 0 |
| #define NV_CTRL_GLYPH_CACHE_ENABLED 1 |
| |
| /* |
| * NV_CTRL_GPU_CURRENT_PERFORMANCE_LEVEL reports the current |
| * Performance level of the GPU driving the X screen. Each |
| * Performance level has associated NVClock and Mem Clock values. |
| */ |
| |
| #define NV_CTRL_GPU_CURRENT_PERFORMANCE_LEVEL 265 /* R--G */ |
| |
| /* |
| * NV_CTRL_GPU_ADAPTIVE_CLOCK_STATE reports if Adaptive Clocking |
| * is Enabled on the GPU driving the X screen. |
| */ |
| |
| #define NV_CTRL_GPU_ADAPTIVE_CLOCK_STATE 266 /* R--G */ |
| #define NV_CTRL_GPU_ADAPTIVE_CLOCK_STATE_DISABLED 0 |
| #define NV_CTRL_GPU_ADAPTIVE_CLOCK_STATE_ENABLED 1 |
| |
| /* |
| * NV_CTRL_GVO_OUTPUT_VIDEO_LOCKED - Returns whether or not the GVO output |
| * video is locked to the GPU. |
| */ |
| |
| #define NV_CTRL_GVO_OUTPUT_VIDEO_LOCKED 267 /* R--- */ |
| #define NV_CTRL_GVO_OUTPUT_VIDEO_LOCKED_FALSE 0 |
| #define NV_CTRL_GVO_OUTPUT_VIDEO_LOCKED_TRUE 1 |
| |
| /* |
| * NV_CTRL_GVO_SYNC_LOCK_STATUS - Returns whether or not the GVO device |
| * is locked to the input ref signal. If the sync mode is set to |
| * NV_CTRL_GVO_SYNC_MODE_GENLOCK, then this returns the genlock |
| * sync status, and if the sync mode is set to NV_CTRL_GVO_SYNC_MODE_FRAMELOCK, |
| * then this reports the frame lock status. |
| */ |
| |
| #define NV_CTRL_GVO_SYNC_LOCK_STATUS 268 /* R--- */ |
| #define NV_CTRL_GVO_SYNC_LOCK_STATUS_UNLOCKED 0 |
| #define NV_CTRL_GVO_SYNC_LOCK_STATUS_LOCKED 1 |
| |
| /* |
| * NV_CTRL_GVO_ANC_TIME_CODE_GENERATION - Allows SDI device to generate |
| * time codes in the ANC region of the SDI video output stream. |
| */ |
| |
| #define NV_CTRL_GVO_ANC_TIME_CODE_GENERATION 269 /* RW-- */ |
| #define NV_CTRL_GVO_ANC_TIME_CODE_GENERATION_DISABLE 0 |
| #define NV_CTRL_GVO_ANC_TIME_CODE_GENERATION_ENABLE 1 |
| |
| /* |
| * NV_CTRL_GVO_COMPOSITE - Enables/Disables SDI compositing. This attribute |
| * is only available when an SDI input source is detected and is in genlock |
| * mode. |
| */ |
| |
| #define NV_CTRL_GVO_COMPOSITE 270 /* RW-- */ |
| #define NV_CTRL_GVO_COMPOSITE_DISABLE 0 |
| #define NV_CTRL_GVO_COMPOSITE_ENABLE 1 |
| |
| /* |
| * NV_CTRL_GVO_COMPOSITE_ALPHA_KEY - When compositing is enabled, this |
| * enables/disables alpha blending. |
| */ |
| |
| #define NV_CTRL_GVO_COMPOSITE_ALPHA_KEY 271 /* RW-- */ |
| #define NV_CTRL_GVO_COMPOSITE_ALPHA_KEY_DISABLE 0 |
| #define NV_CTRL_GVO_COMPOSITE_ALPHA_KEY_ENABLE 1 |
| |
| /* |
| * NV_CTRL_GVO_COMPOSITE_LUMA_KEY_RANGE - Set the values of a luma |
| * channel range. This is a packed int that has the following format |
| * (in order of high-bits to low bits): |
| * |
| * Range # (11 bits), (Enabled 1 bit), min value (10 bits), max value (10 bits) |
| * |
| * To query the current values, pass the range # throught the display_mask |
| * variable. |
| */ |
| |
| #define NV_CTRL_GVO_COMPOSITE_LUMA_KEY_RANGE 272 /* RW-- */ |
| |
| #define NV_CTRL_GVO_COMPOSITE_MAKE_RANGE(range, enable, min, max) \ |
| ((((min)&0x3FF) << 0) | (((max)&0x3FF) << 10) | (((enable)&0x1) << 20) | \ |
| (((range)&0x7FF) << 21)) |
| |
| #define NV_CTRL_GVO_COMPOSITE_GET_RANGE(val, range, enable, min, max) \ |
| (min) = ((val) >> 0) & 0x3FF; \ |
| (max) = ((val) >> 10) & 0x3FF; \ |
| (enable) = ((val) >> 20) & 0x1; \ |
| (range) = ((val) >> 21) & 0x7FF; |
| |
| /* |
| * NV_CTRL_GVO_COMPOSITE_CR_KEY_RANGE - Set the values of a CR |
| * channel range. This is a packed int that has the following format |
| * (in order of high-bits to low bits): |
| * |
| * Range # (11 bits), (Enabled 1 bit), min value (10 bits), max value (10 bits) |
| * |
| * To query the current values, pass the range # throught he display_mask |
| * variable. |
| */ |
| |
| #define NV_CTRL_GVO_COMPOSITE_CR_KEY_RANGE 273 /* RW-- */ |
| |
| /* |
| * NV_CTRL_GVO_COMPOSITE_CB_KEY_RANGE - Set the values of a CB |
| * channel range. This is a packed int that has the following format |
| * (in order of high-bits to low bits): |
| * |
| * Range # (11 bits), (Enabled 1 bit), min value (10 bits), max value (10 bits) |
| * |
| * To query the current values, pass the range # throught he display_mask |
| * variable. |
| */ |
| |
| #define NV_CTRL_GVO_COMPOSITE_CB_KEY_RANGE 274 /* RW-- */ |
| |
| /* |
| * NV_CTRL_GVO_COMPOSITE_NUM_KEY_RANGES - Returns the number of ranges |
| * available for each channel (Y/Luma, Cr, and Cb.) |
| */ |
| |
| #define NV_CTRL_GVO_COMPOSITE_NUM_KEY_RANGES 275 /* R--- */ |
| |
| /* |
| * NV_CTRL_SWITCH_TO_DISPLAYS - Can be used to select which displays |
| * to switch to (as a hotkey event). |
| */ |
| |
| #define NV_CTRL_SWITCH_TO_DISPLAYS 276 /* -W- */ |
| |
| /* |
| * NV_CTRL_NOTEBOOK_DISPLAY_CHANGE_LID_EVENT - Event that notifies |
| * when a notebook lid change occurs (i.e. when the lid is opened or |
| * closed.) This attribute can be queried to retrieve the current |
| * notebook lid status (opened/closed.) |
| */ |
| |
| #define NV_CTRL_NOTEBOOK_DISPLAY_CHANGE_LID_EVENT 277 /* RW- */ |
| #define NV_CTRL_NOTEBOOK_DISPLAY_CHANGE_LID_EVENT_CLOSE 0 |
| #define NV_CTRL_NOTEBOOK_DISPLAY_CHANGE_LID_EVENT_OPEN 1 |
| |
| /* |
| * NV_CTRL_NOTEBOOK_INTERNAL_LCD - Returns the display device mask of |
| * the intenal LCD of a notebook. |
| */ |
| |
| #define NV_CTRL_NOTEBOOK_INTERNAL_LCD 278 /* R-- */ |
| |
| /* |
| * NV_CTRL_DEPTH_30_ALLOWED - returns whether the NVIDIA X driver supports |
| * depth 30 on the specified X screen or GPU. |
| */ |
| |
| #define NV_CTRL_DEPTH_30_ALLOWED 279 /* R--G */ |
| |
| /* |
| * NV_CTRL_MODE_SET_EVENT This attribute is sent as an event |
| * when hotkey, ctrl-alt-+/- or randr event occurs. Note that |
| * This attribute cannot be set or queried and is meant to |
| * be received by clients that wish to be notified of when |
| * mode set events occur. |
| */ |
| |
| #define NV_CTRL_MODE_SET_EVENT 280 /* --- */ |
| |
| /* |
| * NV_CTRL_OPENGL_AA_LINE_GAMMA_VALUE - the gamma value used by |
| * OpenGL when NV_CTRL_OPENGL_AA_LINE_GAMMA is enabled |
| */ |
| |
| #define NV_CTRL_OPENGL_AA_LINE_GAMMA_VALUE 281 /* RW-X */ |
| |
| /* |
| * NV_CTRL_VCSC_HIGH_PERF_MODE - Is used to both query High Performance Mode |
| * status on the Visual Computing System, and also to enable or disable High |
| * Performance Mode. |
| */ |
| |
| #define NV_CTRL_VCSC_HIGH_PERF_MODE 282 /* RW-V */ |
| #define NV_CTRL_VCSC_HIGH_PERF_MODE_DISABLE 0 |
| #define NV_CTRL_VCSC_HIGH_PERF_MODE_ENABLE 1 |
| |
| /* |
| * NV_CTRL_DISPLAYPORT_LINK_RATE - returns the negotiated lane bandwidth of the |
| * DisplayPort main link. |
| * This attribute is only available for DisplayPort flat panels. |
| */ |
| |
| #define NV_CTRL_DISPLAYPORT_LINK_RATE 291 /* R-DG */ |
| #define NV_CTRL_DISPLAYPORT_LINK_RATE_DISABLED 0x0 |
| #define NV_CTRL_DISPLAYPORT_LINK_RATE_1_62GBPS 0x6 |
| #define NV_CTRL_DISPLAYPORT_LINK_RATE_2_70GBPS 0xA |
| |
| /* |
| * NV_CTRL_STEREO_EYES_EXCHANGE - Controls whether or not the left and right |
| * eyes of a stereo image are flipped. |
| */ |
| |
| #define NV_CTRL_STEREO_EYES_EXCHANGE 292 /* RW-X */ |
| #define NV_CTRL_STEREO_EYES_EXCHANGE_OFF 0 |
| #define NV_CTRL_STEREO_EYES_EXCHANGE_ON 1 |
| |
| /* |
| * NV_CTRL_NO_SCANOUT - returns whether the special "NoScanout" mode is |
| * enabled on the specified X screen or GPU; for details on this mode, |
| * see the description of the "none" value for the "UseDisplayDevice" |
| * X configuration option in the NVIDIA driver README. |
| */ |
| |
| #define NV_CTRL_NO_SCANOUT 293 /* R--G */ |
| #define NV_CTRL_NO_SCANOUT_DISABLED 0 |
| #define NV_CTRL_NO_SCANOUT_ENABLED 1 |
| |
| /* |
| * NV_CTRL_GVO_CSC_CHANGED_EVENT This attribute is sent as an event |
| * when the color space conversion matrix has been altered by another |
| * client. |
| */ |
| |
| #define NV_CTRL_GVO_CSC_CHANGED_EVENT 294 /* --- */ |
| |
| /* |
| * NV_CTRL_FRAMELOCK_SLAVEABLE - Returns a bitmask of the display devices |
| * that are (currently) allowed to be selected as slave devices for the |
| * given GPU |
| */ |
| |
| #define NV_CTRL_FRAMELOCK_SLAVEABLE 295 /* R-DG */ |
| |
| /* |
| * NV_CTRL_GVO_SYNC_TO_DISPLAY This attribute controls whether or not |
| * the non-SDI display device will be sync'ed to the SDI display device |
| * (when configured in TwinView, Clone Mode or when using the SDI device |
| * with OpenGL). |
| */ |
| |
| #define NV_CTRL_GVO_SYNC_TO_DISPLAY 296 /* --- */ |
| #define NV_CTRL_GVO_SYNC_TO_DISPLAY_DISABLE 0 |
| #define NV_CTRL_GVO_SYNC_TO_DISPLAY_ENABLE 1 |
| |
| /* |
| * NV_CTRL_X_SERVER_UNIQUE_ID - returns a pseudo-unique identifier for this |
| * X server. Intended for use in cases where an NV-CONTROL client communicates |
| * with multiple X servers, and wants some level of confidence that two |
| * X Display connections correspond to the same or different X servers. |
| */ |
| |
| #define NV_CTRL_X_SERVER_UNIQUE_ID 297 /* R--- */ |
| |
| /* |
| * NV_CTRL_PIXMAP_CACHE - This attribute controls whether the driver attempts to |
| * store video memory pixmaps in a cache. The cache speeds up allocation and |
| * deallocation of pixmaps, but could use more memory than when the cache is |
| * disabled. |
| */ |
| |
| #define NV_CTRL_PIXMAP_CACHE 298 /* RW-X */ |
| #define NV_CTRL_PIXMAP_CACHE_DISABLE 0 |
| #define NV_CTRL_PIXMAP_CACHE_ENABLE 1 |
| |
| /* |
| * NV_CTRL_PIXMAP_CACHE_ROUNDING_SIZE_KB - When the pixmap cache is enabled and |
| * there is not enough free space in the cache to fit a new pixmap, the driver |
| * will round up to the next multiple of this number of kilobytes when |
| * allocating more memory for the cache. |
| */ |
| |
| #define NV_CTRL_PIXMAP_CACHE_ROUNDING_SIZE_KB 299 /* RW-X */ |
| |
| /* |
| * NV_CTRL_IS_GVO_DISPLAY - returns whether or not a given display is an |
| * SDI device. |
| */ |
| |
| #define NV_CTRL_IS_GVO_DISPLAY 300 /* R-D */ |
| #define NV_CTRL_IS_GVO_DISPLAY_FALSE 0 |
| #define NV_CTRL_IS_GVO_DISPLAY_TRUE 1 |
| |
| /* |
| * NV_CTRL_PCI_ID - Returns the PCI vendor and device ID of the specified |
| * device. |
| * |
| * NV_CTRL_PCI_ID is a "packed" integer attribute; the PCI vendor ID is stored |
| * in the upper 16 bits of the integer, and the PCI device ID is stored in the |
| * lower 16 bits of the integer. |
| */ |
| |
| #define NV_CTRL_PCI_ID 301 /* R--GI */ |
| |
| /* |
| * NV_CTRL_GVO_FULL_RANGE_COLOR - Allow full range color data [4-1019] |
| * without clamping to [64-940]. |
| */ |
| |
| #define NV_CTRL_GVO_FULL_RANGE_COLOR 302 /* RW- */ |
| #define NV_CTRL_GVO_FULL_RANGE_COLOR_DISABLED 0 |
| #define NV_CTRL_GVO_FULL_RANGE_COLOR_ENABLED 1 |
| |
| /* |
| * NV_CTRL_SLI_MOSAIC_MODE_AVAILABLE - Returns whether or not |
| * SLI Mosaic Mode supported. |
| */ |
| |
| #define NV_CTRL_SLI_MOSAIC_MODE_AVAILABLE 303 /* R-- */ |
| #define NV_CTRL_SLI_MOSAIC_MODE_AVAILABLE_FALSE 0 |
| #define NV_CTRL_SLI_MOSAIC_MODE_AVAILABLE_TRUE 1 |
| |
| /* |
| * NV_CTRL_GVO_ENABLE_RGB_DATA - Allows clients to specify when |
| * the GVO board should process colors as RGB when the output data |
| * format is one of the NV_CTRL_GVO_DATA_FORMAT_???_PASSTRHU modes. |
| */ |
| |
| #define NV_CTRL_GVO_ENABLE_RGB_DATA 304 /* RW- */ |
| #define NV_CTRL_GVO_ENABLE_RGB_DATA_DISABLE 0 |
| #define NV_CTRL_GVO_ENABLE_RGB_DATA_ENABLE 1 |
| |
| /* |
| * NV_CTRL_IMAGE_SHARPENING_DEFAULT - Returns default value of |
| * Image Sharpening. |
| */ |
| |
| #define NV_CTRL_IMAGE_SHARPENING_DEFAULT 305 /* R-- */ |
| |
| /* |
| * NV_CTRL_PCI_DOMAIN - Returns the PCI domain number the specified device is |
| * using. |
| */ |
| |
| #define NV_CTRL_PCI_DOMAIN 306 /* R--GI */ |
| |
| /* |
| * NV_CTRL_GVI_NUM_JACKS - Returns the number of input BNC jacks available |
| * on a GVI device. |
| */ |
| |
| #define NV_CTRL_GVI_NUM_JACKS 307 /* R--I */ |
| |
| /* |
| * NV_CTRL_GVI_MAX_LINKS_PER_STREAM - Returns the maximum supported number of |
| * links that can be tied to one stream. |
| */ |
| |
| #define NV_CTRL_GVI_MAX_LINKS_PER_STREAM 308 /* R--I */ |
| |
| /* |
| * NV_CTRL_GVI_DETECTED_CHANNEL_BITS_PER_COMPONENT - Returns the detected |
| * number of bits per component (BPC) of data on the given input jack+ |
| * channel. |
| * |
| * The jack number should be specified in the lower 16 bits of the |
| * "display_mask" parameter, while the channel number should be specified in |
| * the upper 16 bits. |
| */ |
| |
| #define NV_CTRL_GVI_DETECTED_CHANNEL_BITS_PER_COMPONENT 309 /* R--I */ |
| #define NV_CTRL_GVI_BITS_PER_COMPONENT_UNKNOWN 0 |
| #define NV_CTRL_GVI_BITS_PER_COMPONENT_8 1 |
| #define NV_CTRL_GVI_BITS_PER_COMPONENT_10 2 |
| #define NV_CTRL_GVI_BITS_PER_COMPONENT_12 3 |
| |
| /* |
| * NV_CTRL_GVI_REQUESTED_STREAM_BITS_PER_COMPONENT - Specify the number of |
| * bits per component (BPC) of data for the captured stream. |
| * The stream number should be specified in the "display_mask" parameter. |
| * |
| * Note: Setting this attribute may also result in the following |
| * NV-CONTROL attributes being reset on the GVI device (to ensure |
| * the configuration remains valid): |
| * NV_CTRL_GVI_REQUESTED_STREAM_COMPONENT_SAMPLING |
| */ |
| |
| #define NV_CTRL_GVI_REQUESTED_STREAM_BITS_PER_COMPONENT 310 /* RW-I */ |
| |
| /* |
| * NV_CTRL_GVI_DETECTED_CHANNEL_COMPONENT_SAMPLING - Returns the detected |
| * sampling format for the input jack+channel. |
| * |
| * The jack number should be specified in the lower 16 bits of the |
| * "display_mask" parameter, while the channel number should be specified in |
| * the upper 16 bits. |
| */ |
| |
| #define NV_CTRL_GVI_DETECTED_CHANNEL_COMPONENT_SAMPLING 311 /* R--I */ |
| #define NV_CTRL_GVI_COMPONENT_SAMPLING_UNKNOWN 0 |
| #define NV_CTRL_GVI_COMPONENT_SAMPLING_4444 1 |
| #define NV_CTRL_GVI_COMPONENT_SAMPLING_4224 2 |
| #define NV_CTRL_GVI_COMPONENT_SAMPLING_444 3 |
| #define NV_CTRL_GVI_COMPONENT_SAMPLING_422 4 |
| #define NV_CTRL_GVI_COMPONENT_SAMPLING_420 5 |
| |
| /* |
| * NV_CTRL_GVI_REQUESTED_COMPONENT_SAMPLING - Specify the sampling format for |
| * the captured stream. |
| * The possible values are the NV_CTRL_GVI_DETECTED_COMPONENT_SAMPLING |
| * constants. |
| * The stream number should be specified in the "display_mask" parameter. |
| */ |
| |
| #define NV_CTRL_GVI_REQUESTED_STREAM_COMPONENT_SAMPLING 312 /* RW-I */ |
| |
| /* |
| * NV_CTRL_GVI_CHROMA_EXPAND - Enable or disable 4:2:2 -> 4:4:4 chroma |
| * expansion for the captured stream. This value is ignored when a |
| * COMPONENT_SAMPLING format is selected that does not use chroma subsampling, |
| * or if a BITS_PER_COMPONENT value is selected that is not supported. |
| * The stream number should be specified in the "display_mask" parameter. |
| */ |
| |
| #define NV_CTRL_GVI_REQUESTED_STREAM_CHROMA_EXPAND 313 /* RW-I */ |
| #define NV_CTRL_GVI_CHROMA_EXPAND_FALSE 0 |
| #define NV_CTRL_GVI_CHROMA_EXPAND_TRUE 1 |
| |
| /* |
| * NV_CTRL_GVI_DETECTED_CHANNEL_COLOR_SPACE - Returns the detected color space |
| * of the input jack+channel. |
| * |
| * The jack number should be specified in the lower 16 bits of the |
| * "display_mask" parameter, while the channel number should be specified in |
| * the upper 16 bits. |
| */ |
| |
| #define NV_CTRL_GVI_DETECTED_CHANNEL_COLOR_SPACE 314 /* R--I */ |
| #define NV_CTRL_GVI_COLOR_SPACE_UNKNOWN 0 |
| #define NV_CTRL_GVI_COLOR_SPACE_GBR 1 |
| #define NV_CTRL_GVI_COLOR_SPACE_GBRA 2 |
| #define NV_CTRL_GVI_COLOR_SPACE_GBRD 3 |
| #define NV_CTRL_GVI_COLOR_SPACE_YCBCR 4 |
| #define NV_CTRL_GVI_COLOR_SPACE_YCBCRA 5 |
| #define NV_CTRL_GVI_COLOR_SPACE_YCBCRD 6 |
| |
| /* |
| * NV_CTRL_GVI_DETECTED_CHANNEL_LINK_ID - Returns the detected link identifier |
| * for the given input jack+channel. |
| * |
| * The jack number should be specified in the lower 16 bits of the |
| * "display_mask" parameter, while the channel number should be specified in |
| * the upper 16 bits. |
| */ |
| |
| #define NV_CTRL_GVI_DETECTED_CHANNEL_LINK_ID 315 /* R--I */ |
| #define NV_CTRL_GVI_LINK_ID_UNKNOWN 0xFFFF |
| |
| /* |
| * NV_CTRL_GVI_DETECTED_CHANNEL_SMPTE352_IDENTIFIER - Returns the 4-byte |
| * SMPTE 352 identifier from the given input jack+channel. |
| * |
| * The jack number should be specified in the lower 16 bits of the |
| * "display_mask" parameter, while the channel number should be specified in |
| * the upper 16 bits. |
| */ |
| |
| #define NV_CTRL_GVI_DETECTED_CHANNEL_SMPTE352_IDENTIFIER 316 /* R--I */ |
| |
| /* |
| * NV_CTRL_GVI_GLOBAL_IDENTIFIER - Returns a global identifier for the |
| * GVI device. This identifier can be used to relate GVI devices named |
| * in NV-CONTROL with those enumerated in OpenGL. |
| */ |
| |
| #define NV_CTRL_GVI_GLOBAL_IDENTIFIER 317 /* R--I */ |
| |
| /* |
| * NV_CTRL_FRAMELOCK_SYNC_DELAY_RESOLUTION - Returns the number of nanoseconds |
| * that one unit of NV_CTRL_FRAMELOCK_SYNC_DELAY corresponds to. |
| */ |
| #define NV_CTRL_FRAMELOCK_SYNC_DELAY_RESOLUTION 318 /* R-- */ |
| |
| /* |
| * NV_CTRL_GPU_COOLER_MANUAL_CONTROL - Query the current or set a new |
| * cooler control state; the value of this attribute controls the |
| * availability of additional cooler control attributes (see below). |
| * |
| * Note: this attribute is unavailable unless cooler control support |
| * has been enabled in the X server (by the user). |
| */ |
| |
| #define NV_CTRL_GPU_COOLER_MANUAL_CONTROL 319 /* RW-G */ |
| #define NV_CTRL_GPU_COOLER_MANUAL_CONTROL_FALSE 0 |
| #define NV_CTRL_GPU_COOLER_MANUAL_CONTROL_TRUE 1 |
| |
| /* |
| * NV_CTRL_THERMAL_COOLER_LEVEL - Returns cooler's current operating |
| * level. |
| */ |
| |
| #define NV_CTRL_THERMAL_COOLER_LEVEL 320 /* RW-C */ |
| |
| /* NV_CTRL_THERMAL_COOLER_LEVEL_SET_DEFAULT - Sets default values of |
| * cooler. |
| */ |
| |
| #define NV_CTRL_THERMAL_COOLER_LEVEL_SET_DEFAULT 321 /* -W-C */ |
| |
| /* |
| * NV_CTRL_THERMAL_COOLER_CONTROL_TYPE - |
| * Returns a cooler's control signal characteristics. |
| * The possible types are restricted, Variable and Toggle. |
| */ |
| |
| #define NV_CTRL_THERMAL_COOLER_CONTROL_TYPE 322 /* R--C */ |
| #define NV_CTRL_THERMAL_COOLER_CONTROL_TYPE_NONE 0 |
| #define NV_CTRL_THERMAL_COOLER_CONTROL_TYPE_TOGGLE 1 |
| #define NV_CTRL_THERMAL_COOLER_CONTROL_TYPE_VARIABLE 2 |
| |
| /* |
| * NV_CTRL_THERMAL_COOLER_TARGET - Returns objects that cooler cools. |
| * Targets may be GPU, Memory, Power Supply or All of these. |
| * GPU_RELATED = GPU | MEMORY | POWER_SUPPLY |
| * |
| */ |
| |
| #define NV_CTRL_THERMAL_COOLER_TARGET 323 /* R--C */ |
| #define NV_CTRL_THERMAL_COOLER_TARGET_NONE 0 |
| #define NV_CTRL_THERMAL_COOLER_TARGET_GPU 1 |
| #define NV_CTRL_THERMAL_COOLER_TARGET_MEMORY 2 |
| #define NV_CTRL_THERMAL_COOLER_TARGET_POWER_SUPPLY 4 |
| #define NV_CTRL_THERMAL_COOLER_TARGET_GPU_RELATED \ |
| (NV_CTRL_THERMAL_COOLER_TARGET_GPU | NV_CTRL_THERMAL_COOLER_TARGET_MEMORY | \ |
| NV_CTRL_THERMAL_COOLER_TARGET_POWER_SUPPLY) |
| |
| /* |
| * NV_CTRL_GPU_ECC_SUPPORTED - Reports whether ECC is supported by the |
| * targeted GPU. |
| */ |
| #define NV_CTRL_GPU_ECC_SUPPORTED 324 /* R--G */ |
| #define NV_CTRL_GPU_ECC_SUPPORTED_FALSE 0 |
| #define NV_CTRL_GPU_ECC_SUPPORTED_TRUE 1 |
| |
| /* |
| * NV_CTRL_GPU_ECC_STATUS - Returns the current hardware ECC setting |
| * for the targeted GPU. |
| */ |
| #define NV_CTRL_GPU_ECC_STATUS 325 /* R--G */ |
| #define NV_CTRL_GPU_ECC_STATUS_DISABLED 0 |
| #define NV_CTRL_GPU_ECC_STATUS_ENABLED 1 |
| |
| /* |
| * NV_CTRL_GPU_ECC_CONFIGURATION - Reports whether ECC can be configured |
| * dynamically for the GPU in question. |
| */ |
| #define NV_CTRL_GPU_ECC_CONFIGURATION_SUPPORTED 326 /* R--G */ |
| #define NV_CTRL_GPU_ECC_CONFIGURATION_SUPPORTED_FALSE 0 |
| #define NV_CTRL_GPU_ECC_CONFIGURATION_SUPPORTED_TRUE 1 |
| |
| /* |
| * NV_CTRL_GPU_ECC_CONFIGURATION_SETTING - Returns the current ECC |
| * configuration setting or specifies new settings. New settings do not |
| * take effect until the next POST. |
| */ |
| #define NV_CTRL_GPU_ECC_CONFIGURATION 327 /* RW-G */ |
| #define NV_CTRL_GPU_ECC_CONFIGURATION_DISABLED 0 |
| #define NV_CTRL_GPU_ECC_CONFIGURATION_ENABLED 1 |
| |
| /* |
| * NV_CTRL_GPU_ECC_DEFAULT_CONFIGURATION_SETTING - Returns the default |
| * ECC configuration setting. |
| */ |
| #define NV_CTRL_GPU_ECC_DEFAULT_CONFIGURATION 328 /* R--G */ |
| #define NV_CTRL_GPU_ECC_DEFAULT_CONFIGURATION_DISABLED 0 |
| #define NV_CTRL_GPU_ECC_DEFAULT_CONFIGURATION_ENABLED 1 |
| |
| /* |
| * NV_CTRL_GPU_ECC_SINGLE_BIT_ERRORS - Returns the number of single-bit |
| * ECC errors detected by the targeted GPU since the last POST. |
| * Note: this attribute is a 64-bit integer attribute. |
| */ |
| #define NV_CTRL_GPU_ECC_SINGLE_BIT_ERRORS 329 /* R--GQ */ |
| |
| /* |
| * NV_CTRL_GPU_ECC_DOUBLE_BIT_ERRORS - Returns the number of double-bit |
| * ECC errors detected by the targeted GPU since the last POST. |
| * Note: this attribute is a 64-bit integer attribute. |
| */ |
| #define NV_CTRL_GPU_ECC_DOUBLE_BIT_ERRORS 330 /* R--GQ */ |
| |
| /* |
| * NV_CTRL_GPU_ECC_AGGREGATE_SINGLE_BIT_ERRORS - Returns the number of |
| * single-bit ECC errors detected by the targeted GPU since the |
| * last counter reset. |
| * Note: this attribute is a 64-bit integer attribute. |
| */ |
| #define NV_CTRL_GPU_ECC_AGGREGATE_SINGLE_BIT_ERRORS 331 /* R--GQ */ |
| |
| /* |
| * NV_CTRL_GPU_ECC_AGGREGATE_DOUBLE_BIT_ERRORS - Returns the number of |
| * double-bit ECC errors detected by the targeted GPU since the |
| * last counter reset. |
| * Note: this attribute is a 64-bit integer attribute. |
| */ |
| #define NV_CTRL_GPU_ECC_AGGREGATE_DOUBLE_BIT_ERRORS 332 /* R--GQ */ |
| |
| /* |
| * NV_CTRL_GPU_ECC_RESET_ERROR_STATUS - Resets the volatile/aggregate |
| * single-bit and double-bit error counters. This attribute is a |
| * bitmask attribute. |
| */ |
| #define NV_CTRL_GPU_ECC_RESET_ERROR_STATUS 333 /* -W-G */ |
| #define NV_CTRL_GPU_ECC_RESET_ERROR_STATUS_VOLATILE 0x00000001 |
| #define NV_CTRL_GPU_ECC_RESET_ERROR_STATUS_AGGREGATE 0x00000002 |
| |
| /* |
| * NV_CTRL_GPU_POWER_MIZER_MODE - Provides a hint to the driver |
| * as to how to manage the performance of the GPU. |
| * |
| * ADAPTIVE - adjust GPU clocks based on GPU |
| * utilization |
| * PREFER_MAXIMUM_PERFORMANCE - raise GPU clocks to favor |
| * maximum performance, to the extent |
| * that thermal and other constraints |
| * allow |
| */ |
| #define NV_CTRL_GPU_POWER_MIZER_MODE 334 /* RW-G */ |
| #define NV_CTRL_GPU_POWER_MIZER_MODE_ADAPTIVE 0 |
| #define NV_CTRL_GPU_POWER_MIZER_MODE_PREFER_MAXIMUM_PERFORMANCE 1 |
| |
| /* |
| * NV_CTRL_GVI_SYNC_OUTPUT_FORMAT - Returns the output sync signal |
| * from the GVI device. |
| */ |
| |
| #define NV_CTRL_GVI_SYNC_OUTPUT_FORMAT 335 /* R--I */ |
| |
| /* |
| * NV_CTRL_GVI_MAX_CHANNELS_PER_JACK - Returns the maximum |
| * supported number of (logical) channels within a single physical jack of |
| * a GVI device. For most SDI video formats, there is only one channel |
| * (channel 0). But for 3G video formats (as specified in SMPTE 425), |
| * as an example, there are two channels (channel 0 and channel 1) per |
| * physical jack. |
| */ |
| |
| #define NV_CTRL_GVI_MAX_CHANNELS_PER_JACK 336 /* R--I */ |
| |
| /* |
| * NV_CTRL_GVI_MAX_STREAMS - Returns the maximum number of streams |
| * that can be configured on the GVI device. |
| */ |
| |
| #define NV_CTRL_GVI_MAX_STREAMS 337 /* R--I */ |
| |
| /* |
| * NV_CTRL_GVI_NUM_CAPTURE_SURFACES - The GVI interface exposed through |
| * NV-CONTROL and the GLX_NV_video_input extension uses internal capture |
| * surfaces when frames are read from the GVI device. The |
| * NV_CTRL_GVI_NUM_CAPTURE_SURFACES can be used to query and assign the |
| * number of capture surfaces. This attribute is applied when |
| * glXBindVideoCaptureDeviceNV() is called by the application. |
| * |
| * A lower number of capture surfaces will mean less video memory is used, |
| * but can result in frames being dropped if the application cannot keep up |
| * with the capture device. A higher number will prevent frames from being |
| * dropped, making capture more reliable but will consume move video memory. |
| */ |
| #define NV_CTRL_GVI_NUM_CAPTURE_SURFACES 338 /* RW-I */ |
| |
| /* |
| * NV_CTRL_OVERSCAN_COMPENSATION - not supported |
| */ |
| #define NV_CTRL_OVERSCAN_COMPENSATION 339 /* RWDG */ |
| |
| /* |
| * NV_CTRL_GPU_PCIE_GENERATION - Reports the current PCIe generation. |
| */ |
| #define NV_CTRL_GPU_PCIE_GENERATION 341 /* R--GI */ |
| #define NV_CTRL_GPU_PCIE_GENERATION1 0x00000001 |
| #define NV_CTRL_GPU_PCIE_GENERATION2 0x00000002 |
| #define NV_CTRL_GPU_PCIE_GENERATION3 0x00000003 |
| |
| /* |
| * NV_CTRL_GVI_BOUND_GPU - Returns the NV_CTRL_TARGET_TYPE_GPU target_id of |
| * the GPU currently bound to the GVI device. Returns -1 if no GPU is |
| * currently bound to the GVI device. |
| */ |
| #define NV_CTRL_GVI_BOUND_GPU 342 /* R--I */ |
| |
| /* |
| * NV_CTRL_GVIO_REQUESTED_VIDEO_FORMAT3 - this attribute is only |
| * intended to be used to query the ValidValues for |
| * NV_CTRL_GVIO_REQUESTED_VIDEO_FORMAT for VIDEO_FORMAT values between |
| * 64 and 95. See NV_CTRL_GVIO_REQUESTED_VIDEO_FORMAT for details. |
| */ |
| |
| #define NV_CTRL_GVIO_REQUESTED_VIDEO_FORMAT3 343 /* ---GI */ |
| |
| /* |
| * NV_CTRL_ACCELERATE_TRAPEZOIDS - Toggles RENDER Trapezoid acceleration |
| */ |
| |
| #define NV_CTRL_ACCELERATE_TRAPEZOIDS 344 /* RW- */ |
| #define NV_CTRL_ACCELERATE_TRAPEZOIDS_DISABLE 0 |
| #define NV_CTRL_ACCELERATE_TRAPEZOIDS_ENABLE 1 |
| |
| /* |
| * NV_CTRL_GPU_CORES - Returns number of GPU cores supported by the graphics |
| * pipeline. |
| */ |
| |
| #define NV_CTRL_GPU_CORES 345 /* R--G */ |
| |
| /* |
| * NV_CTRL_GPU_MEMORY_BUS_WIDTH - Returns memory bus bandwidth on the associated |
| * subdevice. |
| */ |
| |
| #define NV_CTRL_GPU_MEMORY_BUS_WIDTH 346 /* R--G */ |
| |
| /* |
| * NV_CTRL_GVI_TEST_MODE - This attribute controls the GVI test mode. When |
| * enabled, the GVI device will generate fake data as quickly as possible. All |
| * GVI settings are still valid when this is enabled (e.g., the requested video |
| * format is honored and sets the video size). |
| * This may be used to test the pipeline. |
| */ |
| |
| #define NV_CTRL_GVI_TEST_MODE 347 /* R--I */ |
| #define NV_CTRL_GVI_TEST_MODE_DISABLE 0 |
| #define NV_CTRL_GVI_TEST_MODE_ENABLE 1 |
| |
| /* |
| * NV_CTRL_COLOR_SPACE - This option sets color space of the video |
| * signal. |
| */ |
| #define NV_CTRL_COLOR_SPACE 348 /* RWDG */ |
| #define NV_CTRL_COLOR_SPACE_RGB 0 |
| #define NV_CTRL_COLOR_SPACE_YCbCr422 1 |
| #define NV_CTRL_COLOR_SPACE_YCbCr444 2 |
| |
| /* |
| * NV_CTRL_COLOR_RANGE - This option sets color range of the video |
| * signal. |
| */ |
| #define NV_CTRL_COLOR_RANGE 349 /* RWDG */ |
| #define NV_CTRL_COLOR_RANGE_FULL 0 |
| #define NV_CTRL_COLOR_RANGE_LIMITED 1 |
| |
| /* |
| * NV_CTRL_GPU_SCALING_DEFAULT_TARGET - not supported |
| * |
| * NV_CTRL_GPU_SCALING_DEFAULT_METHOD - not supported |
| */ |
| #define NV_CTRL_GPU_SCALING_DEFAULT_TARGET 350 /* R-DG */ |
| #define NV_CTRL_GPU_SCALING_DEFAULT_METHOD 351 /* R-DG */ |
| |
| /* |
| * NV_CTRL_DITHERING_MODE - Controls the dithering mode, when |
| * NV_CTRL_CURRENT_DITHERING is Enabled. |
| * |
| * AUTO: allow the driver to choose the dithering mode automatically. |
| * |
| * DYNAMIC_2X2: use a 2x2 matrix to dither from the GPU's pixel |
| * pipeline to the bit depth of the flat panel. The matrix values |
| * are changed from frame to frame. |
| * |
| * STATIC_2X2: use a 2x2 matrix to dither from the GPU's pixel |
| * pipeline to the bit depth of the flat panel. The matrix values |
| * do not change from frame to frame. |
| * |
| * TEMPORAL: use a pseudorandom value from a uniform distribution calculated at |
| * every pixel to achieve stochastic dithering. This method produces a better |
| * visual result than 2x2 matrix approaches. |
| */ |
| #define NV_CTRL_DITHERING_MODE 352 /* RWDG */ |
| #define NV_CTRL_DITHERING_MODE_AUTO 0 |
| #define NV_CTRL_DITHERING_MODE_DYNAMIC_2X2 1 |
| #define NV_CTRL_DITHERING_MODE_STATIC_2X2 2 |
| #define NV_CTRL_DITHERING_MODE_TEMPORAL 3 |
| |
| /* |
| * NV_CTRL_CURRENT_DITHERING - Returns the current dithering state. |
| */ |
| #define NV_CTRL_CURRENT_DITHERING 353 /* R-DG */ |
| #define NV_CTRL_CURRENT_DITHERING_DISABLED 0 |
| #define NV_CTRL_CURRENT_DITHERING_ENABLED 1 |
| |
| /* |
| * NV_CTRL_CURRENT_DITHERING_MODE - Returns the current dithering |
| * mode. |
| */ |
| #define NV_CTRL_CURRENT_DITHERING_MODE 354 /* R-DG */ |
| #define NV_CTRL_CURRENT_DITHERING_MODE_NONE 0 |
| #define NV_CTRL_CURRENT_DITHERING_MODE_DYNAMIC_2X2 1 |
| #define NV_CTRL_CURRENT_DITHERING_MODE_STATIC_2X2 2 |
| #define NV_CTRL_CURRENT_DITHERING_MODE_TEMPORAL 3 |
| |
| /* |
| * NV_CTRL_THERMAL_SENSOR_READING - Returns the thermal sensor's current |
| * reading. |
| */ |
| #define NV_CTRL_THERMAL_SENSOR_READING 355 /* R--S */ |
| |
| /* |
| * NV_CTRL_THERMAL_SENSOR_PROVIDER - Returns the hardware device that |
| * provides the thermal sensor. |
| */ |
| #define NV_CTRL_THERMAL_SENSOR_PROVIDER 356 /* R--S */ |
| #define NV_CTRL_THERMAL_SENSOR_PROVIDER_NONE 0 |
| #define NV_CTRL_THERMAL_SENSOR_PROVIDER_GPU_INTERNAL 1 |
| #define NV_CTRL_THERMAL_SENSOR_PROVIDER_ADM1032 2 |
| #define NV_CTRL_THERMAL_SENSOR_PROVIDER_ADT7461 3 |
| #define NV_CTRL_THERMAL_SENSOR_PROVIDER_MAX6649 4 |
| #define NV_CTRL_THERMAL_SENSOR_PROVIDER_MAX1617 5 |
| #define NV_CTRL_THERMAL_SENSOR_PROVIDER_LM99 6 |
| #define NV_CTRL_THERMAL_SENSOR_PROVIDER_LM89 7 |
| #define NV_CTRL_THERMAL_SENSOR_PROVIDER_LM64 8 |
| #define NV_CTRL_THERMAL_SENSOR_PROVIDER_G781 9 |
| #define NV_CTRL_THERMAL_SENSOR_PROVIDER_ADT7473 10 |
| #define NV_CTRL_THERMAL_SENSOR_PROVIDER_SBMAX6649 11 |
| #define NV_CTRL_THERMAL_SENSOR_PROVIDER_VBIOSEVT 12 |
| #define NV_CTRL_THERMAL_SENSOR_PROVIDER_OS 13 |
| #define NV_CTRL_THERMAL_SENSOR_PROVIDER_UNKNOWN 0xFFFFFFFF |
| |
| /* |
| * NV_CTRL_THERMAL_SENSOR_TARGET - Returns what hardware component |
| * the thermal sensor is measuring. |
| */ |
| #define NV_CTRL_THERMAL_SENSOR_TARGET 357 /* R--S */ |
| #define NV_CTRL_THERMAL_SENSOR_TARGET_NONE 0 |
| #define NV_CTRL_THERMAL_SENSOR_TARGET_GPU 1 |
| #define NV_CTRL_THERMAL_SENSOR_TARGET_MEMORY 2 |
| #define NV_CTRL_THERMAL_SENSOR_TARGET_POWER_SUPPLY 4 |
| #define NV_CTRL_THERMAL_SENSOR_TARGET_BOARD 8 |
| #define NV_CTRL_THERMAL_SENSOR_TARGET_UNKNOWN 0xFFFFFFFF |
| |
| /* |
| * NV_CTRL_SHOW_MULTIGPU_VISUAL_INDICATOR - when TRUE, OpenGL will |
| * draw information about the current MULTIGPU mode. |
| */ |
| #define NV_CTRL_SHOW_MULTIGPU_VISUAL_INDICATOR 358 /* RW-X */ |
| #define NV_CTRL_SHOW_MULTIGPU_VISUAL_INDICATOR_FALSE 0 |
| #define NV_CTRL_SHOW_MULTIGPU_VISUAL_INDICATOR_TRUE 1 |
| |
| /* |
| * NV_CTRL_GPU_CURRENT_PROCESSOR_CLOCK_FREQS - Returns GPU's processor |
| * clock freqs. |
| */ |
| #define NV_CTRL_GPU_CURRENT_PROCESSOR_CLOCK_FREQS 359 /* RW-G */ |
| |
| /* |
| * NV_CTRL_GVIO_VIDEO_FORMAT_FLAGS - query the flags (various information |
| * for the specified NV_CTRL_GVIO_VIDEO_FORMAT_*. So that this can be |
| * queried with existing interfaces, the video format should be specified |
| * in the display_mask field; eg: |
| * |
| * XNVCTRLQueryTargetAttribute(dpy, |
| * NV_CTRL_TARGET_TYPE_GVI, |
| * gvi, |
| * NV_CTRL_GVIO_VIDEO_FORMAT_720P_60_00_SMPTE296, |
| * NV_CTRL_GVIO_VIDEO_FORMAT_FLAGS, |
| * &flags); |
| * |
| * Note: The NV_CTRL_GVIO_VIDEO_FORMAT_FLAGS_3G_1080P_NO_12BPC flag is set |
| * for those 1080P 3G modes (level A and B) that do not support |
| * 12 bits per component (when configuring a GVI stream.) |
| */ |
| |
| #define NV_CTRL_GVIO_VIDEO_FORMAT_FLAGS 360 /* R--I */ |
| #define NV_CTRL_GVIO_VIDEO_FORMAT_FLAGS_NONE 0x00000000 |
| #define NV_CTRL_GVIO_VIDEO_FORMAT_FLAGS_INTERLACED 0x00000001 |
| #define NV_CTRL_GVIO_VIDEO_FORMAT_FLAGS_PROGRESSIVE 0x00000002 |
| #define NV_CTRL_GVIO_VIDEO_FORMAT_FLAGS_PSF 0x00000004 |
| #define NV_CTRL_GVIO_VIDEO_FORMAT_FLAGS_3G_LEVEL_A 0x00000008 |
| #define NV_CTRL_GVIO_VIDEO_FORMAT_FLAGS_3G_LEVEL_B 0x00000010 |
| #define NV_CTRL_GVIO_VIDEO_FORMAT_FLAGS_3G \ |
| ((NV_CTRL_GVIO_VIDEO_FORMAT_FLAGS_3G_LEVEL_A) | (NV_CTRL_GVIO_VIDEO_FORMAT_FLAGS_3G_LEVEL_B)) |
| #define NV_CTRL_GVIO_VIDEO_FORMAT_FLAGS_3G_1080P_NO_12BPC 0x00000020 |
| |
| /* |
| * NV_CTRL_GPU_PCIE_MAX_LINK_SPEED - returns maximum PCIe link speed, |
| * in gigatransfers per second (GT/s). |
| */ |
| |
| #define NV_CTRL_GPU_PCIE_MAX_LINK_SPEED 361 /* R--GI */ |
| |
| /* |
| * NV_CTRL_3D_VISION_PRO_RESET_TRANSCEIVER_TO_FACTORY_SETTINGS - Resets the |
| * 3D Vision Pro transceiver to its factory settings. |
| */ |
| #define NV_CTRL_3D_VISION_PRO_RESET_TRANSCEIVER_TO_FACTORY_SETTINGS 363 /* -W-T */ |
| |
| /* |
| * NV_CTRL_3D_VISION_PRO_TRANSCEIVER_CHANNEL - Controls the channel that is |
| * currently used by the 3D Vision Pro transceiver. |
| */ |
| #define NV_CTRL_3D_VISION_PRO_TRANSCEIVER_CHANNEL 364 /* RW-T */ |
| |
| /* |
| * NV_CTRL_3D_VISION_PRO_TRANSCEIVER_MODE - Controls the mode in which the |
| * 3D Vision Pro transceiver operates. |
| * NV_CTRL_3D_VISION_PRO_TM_LOW_RANGE is bidirectional |
| * NV_CTRL_3D_VISION_PRO_TM_MEDIUM_RANGE is bidirectional |
| * NV_CTRL_3D_VISION_PRO_TM_HIGH_RANGE may be bidirectional just up to a |
| * given range, and unidirectional beyond it |
| * NV_CTRL_3D_VISION_PRO_TM_COUNT is the total number of |
| * 3D Vision Pro transceiver modes |
| */ |
| #define NV_CTRL_3D_VISION_PRO_TRANSCEIVER_MODE 365 /* RW-T */ |
| #define NV_CTRL_3D_VISION_PRO_TRANSCEIVER_MODE_INVALID 0 |
| #define NV_CTRL_3D_VISION_PRO_TRANSCEIVER_MODE_LOW_RANGE 1 |
| #define NV_CTRL_3D_VISION_PRO_TRANSCEIVER_MODE_MEDIUM_RANGE 2 |
| #define NV_CTRL_3D_VISION_PRO_TRANSCEIVER_MODE_HIGH_RANGE 3 |
| #define NV_CTRL_3D_VISION_PRO_TRANSCEIVER_MODE_COUNT 4 |
| |
| /* |
| * NV_CTRL_SYNCHRONOUS_PALETTE_UPDATES - controls whether updates to the color |
| * lookup table (LUT) are synchronous with respect to X rendering. For example, |
| * if an X client sends XStoreColors followed by XFillRectangle, the driver will |
| * guarantee that the FillRectangle request is not processed until after the |
| * updated LUT colors are actually visible on the screen if |
| * NV_CTRL_SYNCHRONOUS_PALETTE_UPDATES is enabled. Otherwise, the rendering may |
| * occur first. |
| * |
| * This makes a difference for applications that use the LUT to animate, such as |
| * XPilot. If you experience flickering in applications that use LUT |
| * animations, try enabling this attribute. |
| * |
| * When synchronous updates are enabled, XStoreColors requests will be processed |
| * at your screen's refresh rate. |
| */ |
| |
| #define NV_CTRL_SYNCHRONOUS_PALETTE_UPDATES 367 /* RWDG */ |
| #define NV_CTRL_SYNCHRONOUS_PALETTE_UPDATES_DISABLE 0 |
| #define NV_CTRL_SYNCHRONOUS_PALETTE_UPDATES_ENABLE 1 |
| |
| /* |
| * NV_CTRL_DITHERING_DEPTH - Controls the dithering depth when |
| * NV_CTRL_CURRENT_DITHERING is ENABLED. Some displays connected |
| * to the GPU via the DVI or LVDS interfaces cannot display the |
| * full color range of ten bits per channel, so the GPU will |
| * dither to either 6 or 8 bits per channel. |
| */ |
| #define NV_CTRL_DITHERING_DEPTH 368 /* RWDG */ |
| #define NV_CTRL_DITHERING_DEPTH_AUTO 0 |
| #define NV_CTRL_DITHERING_DEPTH_6_BITS 1 |
| #define NV_CTRL_DITHERING_DEPTH_8_BITS 2 |
| |
| /* |
| * NV_CTRL_CURRENT_DITHERING_DEPTH - Returns the current dithering |
| * depth value. |
| */ |
| #define NV_CTRL_CURRENT_DITHERING_DEPTH 369 /* R-DG */ |
| #define NV_CTRL_CURRENT_DITHERING_DEPTH_NONE 0 |
| #define NV_CTRL_CURRENT_DITHERING_DEPTH_6_BITS 1 |
| #define NV_CTRL_CURRENT_DITHERING_DEPTH_8_BITS 2 |
| |
| /* |
| * NV_CTRL_3D_VISION_PRO_TRANSCEIVER_CHANNEL_FREQUENCY - Returns the |
| * frequency of the channel(in kHz) of the 3D Vision Pro transceiver. |
| * Use the display_mask parameter to specify the channel number. |
| */ |
| #define NV_CTRL_3D_VISION_PRO_TRANSCEIVER_CHANNEL_FREQUENCY 370 /* R--T */ |
| |
| /* |
| * NV_CTRL_3D_VISION_PRO_TRANSCEIVER_CHANNEL_QUALITY - Returns the |
| * quality of the channel(in percentage) of the 3D Vision Pro transceiver. |
| * Use the display_mask parameter to specify the channel number. |
| */ |
| #define NV_CTRL_3D_VISION_PRO_TRANSCEIVER_CHANNEL_QUALITY 371 /* R--T */ |
| |
| /* |
| * NV_CTRL_3D_VISION_PRO_TRANSCEIVER_CHANNEL_COUNT - Returns the number of |
| * channels on the 3D Vision Pro transceiver. |
| */ |
| #define NV_CTRL_3D_VISION_PRO_TRANSCEIVER_CHANNEL_COUNT 372 /* R--T */ |
| |
| /* |
| * NV_CTRL_3D_VISION_PRO_PAIR_GLASSES - Puts the 3D Vision Pro |
| * transceiver into pairing mode to gather additional glasses. |
| * NV_CTRL_3D_VISION_PRO_PAIR_GLASSES_STOP - stops any pairing |
| * NV_CTRL_3D_VISION_PRO_PAIR_GLASSES_BEACON - starts continuous |
| * pairing via beacon mode |
| * Any other value, N - Puts the 3D Vision Pro transceiver into |
| * authenticated pairing mode for N seconds. |
| */ |
| #define NV_CTRL_3D_VISION_PRO_PAIR_GLASSES 373 /* -W-T */ |
| #define NV_CTRL_3D_VISION_PRO_PAIR_GLASSES_STOP 0 |
| #define NV_CTRL_3D_VISION_PRO_PAIR_GLASSES_BEACON 0xFFFFFFFF |
| |
| /* |
| * NV_CTRL_3D_VISION_PRO_UNPAIR_GLASSES - Tells a specific pair |
| * of glasses to unpair. The glasses will "forget" the address |
| * of the 3D Vision Pro transceiver to which they have been paired. |
| * To unpair all the currently paired glasses, specify |
| * the glasses id as 0. |
| */ |
| #define NV_CTRL_3D_VISION_PRO_UNPAIR_GLASSES 374 /* -W-T */ |
| |
| /* |
| * NV_CTRL_3D_VISION_PRO_DISCOVER_GLASSES - Tells the 3D Vision Pro |
| * transceiver about the glasses that have been paired using |
| * NV_CTRL_3D_VISION_PRO_PAIR_GLASSES_BEACON. Unless this is done, |
| * the 3D Vision Pro transceiver will not know about glasses paired in |
| * beacon mode. |
| */ |
| #define NV_CTRL_3D_VISION_PRO_DISCOVER_GLASSES 375 /* -W-T */ |
| |
| /* |
| * NV_CTRL_3D_VISION_PRO_IDENTIFY_GLASSES - Causes glasses LEDs to |
| * flash for a short period of time. |
| */ |
| #define NV_CTRL_3D_VISION_PRO_IDENTIFY_GLASSES 376 /* -W-T */ |
| |
| /* |
| * NV_CTRL_3D_VISION_PRO_GLASSES_SYNC_CYCLE - Controls the |
| * sync cycle duration(in milliseconds) of the glasses. |
| * Use the display_mask parameter to specify the glasses id. |
| */ |
| #define NV_CTRL_3D_VISION_PRO_GLASSES_SYNC_CYCLE 378 /* RW-T */ |
| |
| /* |
| * NV_CTRL_3D_VISION_PRO_GLASSES_MISSED_SYNC_CYCLES - Returns the |
| * number of state sync cycles recently missed by the glasses. |
| * Use the display_mask parameter to specify the glasses id. |
| */ |
| #define NV_CTRL_3D_VISION_PRO_GLASSES_MISSED_SYNC_CYCLES 379 /* R--T */ |
| |
| /* |
| * NV_CTRL_3D_VISION_PRO_GLASSES_BATTERY_LEVEL - Returns the |
| * battery level(in percentage) of the glasses. |
| * Use the display_mask parameter to specify the glasses id. |
| */ |
| #define NV_CTRL_3D_VISION_PRO_GLASSES_BATTERY_LEVEL 380 /* R--T */ |
| |
| /* |
| * NV_CTRL_GVO_ANC_PARITY_COMPUTATION - Controls the SDI device's computation |
| * of the parity bit (bit 8) for ANC data words. |
| */ |
| |
| #define NV_CTRL_GVO_ANC_PARITY_COMPUTATION 381 /* RW--- */ |
| #define NV_CTRL_GVO_ANC_PARITY_COMPUTATION_AUTO 0 |
| #define NV_CTRL_GVO_ANC_PARITY_COMPUTATION_ON 1 |
| #define NV_CTRL_GVO_ANC_PARITY_COMPUTATION_OFF 2 |
| |
| /* |
| * NV_CTRL_3D_VISION_PRO_GLASSES_PAIR_EVENT - This attribute is sent |
| * as an event when glasses get paired in response to pair command |
| * from any of the clients. |
| */ |
| #define NV_CTRL_3D_VISION_PRO_GLASSES_PAIR_EVENT 382 /* ---T */ |
| |
| /* |
| * NV_CTRL_3D_VISION_PRO_GLASSES_UNPAIR_EVENT - This attribute is sent |
| * as an event when glasses get unpaired in response to unpair command |
| * from any of the clients. |
| */ |
| #define NV_CTRL_3D_VISION_PRO_GLASSES_UNPAIR_EVENT 383 /* ---T */ |
| |
| /* |
| * NV_CTRL_GPU_PCIE_CURRENT_LINK_WIDTH - returns the current |
| * PCIe link width, in number of lanes. |
| */ |
| #define NV_CTRL_GPU_PCIE_CURRENT_LINK_WIDTH 384 /* R--GI */ |
| |
| /* |
| * NV_CTRL_GPU_PCIE_CURRENT_LINK_SPEED - returns the current |
| * PCIe link speed, in megatransfers per second (GT/s). |
| */ |
| #define NV_CTRL_GPU_PCIE_CURRENT_LINK_SPEED 385 /* R--GI */ |
| |
| /* |
| * NV_CTRL_GVO_AUDIO_BLANKING - specifies whether the GVO device should delete |
| * audio ancillary data packets when frames are repeated. |
| * |
| * When a new frame is not ready in time, the current frame, including all |
| * ancillary data packets, is repeated. When this data includes audio packets, |
| * this can result in stutters or clicks. When this option is enabled, the GVO |
| * device will detect when frames are repeated, identify audio ancillary data |
| * packets, and mark them for deletion. |
| * |
| * This option is applied when the GVO device is bound. |
| */ |
| #define NV_CTRL_GVO_AUDIO_BLANKING 386 /* RW- */ |
| #define NV_CTRL_GVO_AUDIO_BLANKING_DISABLE 0 |
| #define NV_CTRL_GVO_AUDIO_BLANKING_ENABLE 1 |
| |
| /* |
| * NV_CTRL_CURRENT_METAMODE_ID - switch modes to the MetaMode with |
| * the specified ID. |
| */ |
| #define NV_CTRL_CURRENT_METAMODE_ID 387 /* RW- */ |
| |
| /* |
| * NV_CTRL_DISPLAY_ENABLED - Returns whether or not the display device |
| * is currently enabled. |
| */ |
| #define NV_CTRL_DISPLAY_ENABLED 388 /* R-D */ |
| #define NV_CTRL_DISPLAY_ENABLED_TRUE 1 |
| #define NV_CTRL_DISPLAY_ENABLED_FALSE 0 |
| |
| #define NV_CTRL_LAST_ATTRIBUTE NV_CTRL_DISPLAY_ENABLED |
| |
| /**************************************************************************/ |
| |
| /* |
| * String Attributes: |
| * |
| * String attributes can be queryied through the XNVCTRLQueryStringAttribute() |
| * and XNVCTRLQueryTargetStringAttribute() function calls. |
| * |
| * String attributes can be set through the XNVCTRLSetStringAttribute() |
| * function call. (There are currently no string attributes that can be |
| * set on non-X Screen targets.) |
| * |
| * Unless otherwise noted, all string attributes can be queried/set using an |
| * NV_CTRL_TARGET_TYPE_X_SCREEN target. Attributes that cannot take an |
| * NV_CTRL_TARGET_TYPE_X_SCREEN target also cannot be queried/set through |
| * XNVCTRLQueryStringAttribute()/XNVCTRLSetStringAttribute() (Since |
| * these assume an X Screen target). |
| */ |
| |
| /* |
| * NV_CTRL_STRING_PRODUCT_NAME - the GPU product name on which the |
| * specified X screen is running. |
| * |
| * This attribute may be queried through XNVCTRLQueryTargetStringAttribute() |
| * using a NV_CTRL_TARGET_TYPE_GPU or NV_CTRL_TARGET_TYPE_X_SCREEN target. |
| */ |
| |
| #define NV_CTRL_STRING_PRODUCT_NAME 0 /* R--G */ |
| |
| /* |
| * NV_CTRL_STRING_VBIOS_VERSION - the video bios version on the GPU on |
| * which the specified X screen is running. |
| */ |
| |
| #define NV_CTRL_STRING_VBIOS_VERSION 1 /* R--G */ |
| |
| /* |
| * NV_CTRL_STRING_NVIDIA_DRIVER_VERSION - string representation of the |
| * NVIDIA driver version number for the NVIDIA X driver in use. |
| */ |
| |
| #define NV_CTRL_STRING_NVIDIA_DRIVER_VERSION 3 /* R--G */ |
| |
| /* |
| * NV_CTRL_STRING_DISPLAY_DEVICE_NAME - name of the display device |
| * specified in the display_mask argument. |
| * |
| * This attribute may be queried through XNVCTRLQueryTargetStringAttribute() |
| * using a NV_CTRL_TARGET_TYPE_GPU or NV_CTRL_TARGET_TYPE_X_SCREEN target. |
| */ |
| |
| #define NV_CTRL_STRING_DISPLAY_DEVICE_NAME 4 /* R-DG */ |
| |
| /* |
| * NV_CTRL_STRING_TV_ENCODER_NAME - name of the TV encoder used by the |
| * specified display device; only valid if the display device is a TV. |
| */ |
| |
| #define NV_CTRL_STRING_TV_ENCODER_NAME 5 /* R-DG */ |
| |
| /* |
| * NV_CTRL_STRING_GVIO_FIRMWARE_VERSION - indicates the version of the |
| * Firmware on the GVIO device. |
| */ |
| |
| #define NV_CTRL_STRING_GVIO_FIRMWARE_VERSION 8 /* R--I */ |
| |
| /* |
| * The following is deprecated; use NV_CTRL_STRING_GVIO_FIRMWARE_VERSION, |
| * instead |
| */ |
| #define NV_CTRL_STRING_GVO_FIRMWARE_VERSION 8 /* R-- */ |
| |
| /* |
| * NV_CTRL_STRING_CURRENT_MODELINE - Return the ModeLine currently |
| * being used by the specified display device. |
| * |
| * This attribute may be queried through XNVCTRLQueryTargetStringAttribute() |
| * using an NV_CTRL_TARGET_TYPE_GPU or NV_CTRL_TARGET_TYPE_X_SCREEN target. |
| * |
| * The ModeLine string may be prepended with a comma-separated list of |
| * "token=value" pairs, separated from the ModeLine string by "::". |
| * This "token=value" syntax is the same as that used in |
| * NV_CTRL_BINARY_DATA_MODELINES |
| */ |
| |
| #define NV_CTRL_STRING_CURRENT_MODELINE 9 /* R-DG */ |
| |
| /* |
| * NV_CTRL_STRING_ADD_MODELINE - Adds a ModeLine to the specified |
| * display device. The ModeLine is not added if validation fails. |
| * |
| * The ModeLine string should have the same syntax as a ModeLine in |
| * the X configuration file; e.g., |
| * |
| * "1600x1200" 229.5 1600 1664 1856 2160 1200 1201 1204 1250 +HSync +VSync |
| */ |
| |
| #define NV_CTRL_STRING_ADD_MODELINE 10 /* -WDG */ |
| |
| /* |
| * NV_CTRL_STRING_DELETE_MODELINE - Deletes an existing ModeLine |
| * from the specified display device. The currently selected |
| * ModeLine cannot be deleted. (This also means you cannot delete |
| * the last ModeLine.) |
| * |
| * The ModeLine string should have the same syntax as a ModeLine in |
| * the X configuration file; e.g., |
| * |
| * "1600x1200" 229.5 1600 1664 1856 2160 1200 1201 1204 1250 +HSync +VSync |
| */ |
| |
| #define NV_CTRL_STRING_DELETE_MODELINE 11 /* -WDG */ |
| |
| /* |
| * NV_CTRL_STRING_CURRENT_METAMODE - Returns the metamode currently |
| * being used by the specified X screen. The MetaMode string has the |
| * same syntax as the MetaMode X configuration option, as documented |
| * in the NVIDIA driver README. |
| * |
| * The returned string may be prepended with a comma-separated list of |
| * "token=value" pairs, separated from the MetaMode string by "::". |
| * This "token=value" syntax is the same as that used in |
| * NV_CTRL_BINARY_DATA_METAMODES. |
| */ |
| |
| #define NV_CTRL_STRING_CURRENT_METAMODE 12 /* RW-- */ |
| #define NV_CTRL_STRING_CURRENT_METAMODE_VERSION_1 NV_CTRL_STRING_CURRENT_METAMODE |
| |
| /* |
| * NV_CTRL_STRING_ADD_METAMODE - Adds a MetaMode to the specified |
| * X Screen. |
| * |
| * It is recommended to not use this attribute, but instead use |
| * NV_CTRL_STRING_OPERATION_ADD_METAMODE. |
| */ |
| |
| #define NV_CTRL_STRING_ADD_METAMODE 13 /* -W-- */ |
| |
| /* |
| * NV_CTRL_STRING_DELETE_METAMODE - Deletes an existing MetaMode from |
| * the specified X Screen. The currently selected MetaMode cannot be |
| * deleted. (This also means you cannot delete the last MetaMode). |
| * The MetaMode string should have the same syntax as the MetaMode X |
| * configuration option, as documented in the NVIDIA driver README. |
| */ |
| |
| #define NV_CTRL_STRING_DELETE_METAMODE 14 /* -WD-- */ |
| |
| /* |
| * NV_CTRL_STRING_VCSC_PRODUCT_NAME - Querys the product name of the |
| * VCSC device. |
| * |
| * This attribute must be queried through XNVCTRLQueryTargetStringAttribute() |
| * using a NV_CTRL_TARGET_TYPE_VCSC target. |
| */ |
| |
| #define NV_CTRL_STRING_VCSC_PRODUCT_NAME 15 /* R---V */ |
| |
| /* |
| * NV_CTRL_STRING_VCSC_PRODUCT_ID - Querys the product ID of the VCSC device. |
| * |
| * This attribute must be queried through XNVCTRLQueryTargetStringAttribute() |
| * using a NV_CTRL_TARGET_TYPE_VCSC target. |
| */ |
| |
| #define NV_CTRL_STRING_VCSC_PRODUCT_ID 16 /* R---V */ |
| |
| /* |
| * NV_CTRL_STRING_VCSC_SERIAL_NUMBER - Querys the unique serial number |
| * of the VCS device. |
| * |
| * This attribute must be queried through XNVCTRLQueryTargetStringAttribute() |
| * using a NV_CTRL_TARGET_TYPE_VCSC target. |
| */ |
| |
| #define NV_CTRL_STRING_VCSC_SERIAL_NUMBER 17 /* R---V */ |
| |
| /* |
| * NV_CTRL_STRING_VCSC_BUILD_DATE - Querys the date of the VCS device. |
| * the returned string is in the following format: "Week.Year" |
| * |
| * This attribute must be queried through XNVCTRLQueryTargetStringAttribute() |
| * using a NV_CTRL_TARGET_TYPE_VCSC target. |
| */ |
| |
| #define NV_CTRL_STRING_VCSC_BUILD_DATE 18 /* R---V */ |
| |
| /* |
| * NV_CTRL_STRING_VCSC_FIRMWARE_VERSION - Querys the firmware version |
| * of the VCS device. |
| * |
| * This attribute must be queried through XNVCTRLQueryTargetStringAttribute() |
| * using a NV_CTRL_TARGET_TYPE_VCSC target. |
| */ |
| |
| #define NV_CTRL_STRING_VCSC_FIRMWARE_VERSION 19 /* R---V */ |
| |
| /* |
| * NV_CTRL_STRING_VCSC_FIRMWARE_REVISION - Querys the firmware revision |
| * of the VCS device. |
| * |
| * This attribute must be queried through XNVCTRLQueryTargetStringAttribute() |
| * using a NV_CTRL_TARGET_TYPE_VCS target. |
| */ |
| |
| #define NV_CTRL_STRING_VCSC_FIRMWARE_REVISION 20 /* R---V */ |
| |
| /* |
| * NV_CTRL_STRING_VCSC_HARDWARE_VERSION - Querys the hardware version |
| * of the VCS device. |
| * |
| * This attribute must be queried through XNVCTRLQueryTargetStringAttribute() |
| * using a NV_CTRL_TARGET_TYPE_VCSC target. |
| */ |
| |
| #define NV_CTRL_STRING_VCSC_HARDWARE_VERSION 21 /* R---V */ |
| |
| /* |
| * NV_CTRL_STRING_VCSC_HARDWARE_REVISION - Querys the hardware revision |
| * of the VCS device. |
| * |
| * This attribute must be queried through XNVCTRLQueryTargetStringAttribute() |
| * using a NV_CTRL_TARGET_TYPE_VCSC target. |
| */ |
| |
| #define NV_CTRL_STRING_VCSC_HARDWARE_REVISION 22 /* R---V */ |
| |
| /* |
| * NV_CTRL_STRING_MOVE_METAMODE - Moves a MetaMode to the specified |
| * index location. The MetaMode must already exist in the X Screen's |
| * list of MetaModes (as returned by the NV_CTRL_BINARY_DATA_METAMODES |
| * attribute). If the index is larger than the number of MetaModes in |
| * the list, the MetaMode is moved to the end of the list. The |
| * MetaMode string should have the same syntax as the MetaMode X |
| * configuration option, as documented in the NVIDIA driver README. |
| |
| * The MetaMode string must be prepended with a comma-separated list |
| * of "token=value" pairs, separated from the MetaMode string by "::". |
| * Currently, the only valid token is "index", which indicates where |
| * in the MetaMode list the MetaMode should be moved to. |
| * |
| * Other tokens may be added in the future. |
| * |
| * E.g., |
| * "index=5 :: CRT-0: 1024x768 @1024x768 +0+0" |
| */ |
| |
| #define NV_CTRL_STRING_MOVE_METAMODE 23 /* -W-- */ |
| |
| /* |
| * NV_CTRL_STRING_VALID_HORIZ_SYNC_RANGES - returns the valid |
| * horizontal sync ranges used to perform mode validation for the |
| * specified display device. The ranges are in the same format as the |
| * "HorizSync" X config option: |
| * |
| * "horizsync-range may be a comma separated list of either discrete |
| * values or ranges of values. A range of values is two values |
| * separated by a dash." |
| * |
| * The values are in kHz. |
| * |
| * Additionally, the string may be prepended with a comma-separated |
| * list of "token=value" pairs, separated from the HorizSync string by |
| * "::". Valid tokens: |
| * |
| * Token Value |
| * "source" "edid" - HorizSync is from the display device's EDID |
| * "xconfig" - HorizSync is from the "HorizSync" entry in |
| * the Monitor section of the X config file |
| * "option" - HorizSync is from the "HorizSync" NVIDIA X |
| * config option |
| * "twinview" - HorizSync is from the "SecondMonitorHorizSync" |
| * NVIDIA X config option |
| * "builtin" - HorizSync is from NVIDIA X driver builtin |
| * default values |
| * |
| * Additional tokens and/or values may be added in the future. |
| * |
| * Example: "source=edid :: 30.000-62.000" |
| */ |
| |
| #define NV_CTRL_STRING_VALID_HORIZ_SYNC_RANGES 24 /* R-DG */ |
| |
| /* |
| * NV_CTRL_STRING_VALID_VERT_REFRESH_RANGES - returns the valid |
| * vertical refresh ranges used to perform mode validation for the |
| * specified display device. The ranges are in the same format as the |
| * "VertRefresh" X config option: |
| * |
| * "vertrefresh-range may be a comma separated list of either discrete |
| * values or ranges of values. A range of values is two values |
| * separated by a dash." |
| * |
| * The values are in Hz. |
| * |
| * Additionally, the string may be prepended with a comma-separated |
| * list of "token=value" pairs, separated from the VertRefresh string by |
| * "::". Valid tokens: |
| * |
| * Token Value |
| * "source" "edid" - VertRefresh is from the display device's EDID |
| * "xconfig" - VertRefresh is from the "VertRefresh" entry in |
| * the Monitor section of the X config file |
| * "option" - VertRefresh is from the "VertRefresh" NVIDIA X |
| * config option |
| * "twinview" - VertRefresh is from the "SecondMonitorVertRefresh" |
| * NVIDIA X config option |
| * "builtin" - VertRefresh is from NVIDIA X driver builtin |
| * default values |
| * |
| * Additional tokens and/or values may be added in the future. |
| * |
| * Example: "source=edid :: 50.000-75.000" |
| */ |
| |
| #define NV_CTRL_STRING_VALID_VERT_REFRESH_RANGES 25 /* R-DG */ |
| |
| /* |
| * NV_CTRL_STRING_XINERAMA_SCREEN_INFO - returns the physical X Screen's |
| * initial position and size (in absolute coordinates) within the Xinerama |
| * desktop as the "token=value" string: "x=#, y=#, width=#, height=#" |
| * |
| * Querying this attribute returns FALSE if NV_CTRL_XINERAMA is not |
| * NV_CTRL_XINERAMA_ON. |
| */ |
| |
| #define NV_CTRL_STRING_XINERAMA_SCREEN_INFO 26 /* R--- */ |
| |
| /* |
| * NV_CTRL_STRING_TWINVIEW_XINERAMA_INFO_ORDER - used to specify the |
| * order that display devices will be returned via Xinerama when |
| * nvidiaXineramaInfo is enabled. Follows the same syntax as the |
| * nvidiaXineramaInfoOrder X config option. |
| */ |
| |
| #define NV_CTRL_STRING_NVIDIA_XINERAMA_INFO_ORDER 27 /* RW-- */ |
| |
| #define NV_CTRL_STRING_TWINVIEW_XINERAMA_INFO_ORDER \ |
| NV_CTRL_STRING_NVIDIA_XINERAMA_INFO_ORDER /* for backwards compatibility: */ |
| |
| /* |
| * NV_CTRL_STRING_SLI_MODE - returns a string describing the current |
| * SLI mode, if any, or FALSE if SLI is not currently enabled. |
| * |
| * This string should be used for informational purposes only, and |
| * should not be used to distinguish between SLI modes, other than to |
| * recognize when SLI is disabled (FALSE is returned) or |
| * enabled (the returned string is non-NULL and describes the current |
| * SLI configuration). |
| */ |
| |
| #define NV_CTRL_STRING_SLI_MODE 28 /* R---*/ |
| |
| /* |
| * NV_CTRL_STRING_PERFORMANCE_MODES - returns a string with all the |
| * performance modes defined for this GPU along with their associated |
| * NV Clock and Memory Clock values. |
| * |
| * Each performance modes are returned as a comma-separated list of |
| * "token=value" pairs. Each set of performance mode tokens are separated |
| * by a ";". Valid tokens: |
| * |
| * Token Value |
| * "perf" integer - the Performance level |
| * "nvclock" integer - the GPU clocks (in MHz) for the perf level |
| * "memclock" integer - the memory clocks (in MHz) for the perf level |
| * |
| * |
| * Example: |
| * |
| * perf=0, nvclock=500, memclock=505 ; perf=1, nvclock=650, memclock=505 |
| * |
| * This attribute may be queried through XNVCTRLQueryTargetStringAttribute() |
| * using a NV_CTRL_TARGET_TYPE_GPU or NV_CTRL_TARGET_TYPE_X_SCREEN target. |
| */ |
| |
| #define NV_CTRL_STRING_PERFORMANCE_MODES 29 /* R--G */ |
| |
| /* |
| * NV_CTRL_STRING_VCSC_FAN_STATUS - returns a string with status of all the |
| * fans in the Visual Computing System, if such a query is supported. Fan |
| * information is reported along with its tachometer reading (in RPM) and a |
| * flag indicating whether the fan has failed or not. |
| * |
| * Valid tokens: |
| * |
| * Token Value |
| * "fan" integer - the Fan index |
| * "speed" integer - the tachometer reading of the fan in rpm |
| * "fail" integer - flag to indicate whether the fan has failed |
| * |
| * Example: |
| * |
| * fan=0, speed=694, fail=0 ; fan=1, speed=693, fail=0 |
| * |
| * This attribute must be queried through XNVCTRLQueryTargetStringAttribute() |
| * using a NV_CTRL_TARGET_TYPE_VCSC target. |
| * |
| */ |
| |
| #define NV_CTRL_STRING_VCSC_FAN_STATUS 30 /* R---V */ |
| |
| /* |
| * NV_CTRL_STRING_VCSC_TEMPERATURES - returns a string with all Temperature |
| * readings in the Visual Computing System, if such a query is supported. |
| * Intake, Exhaust and Board Temperature values are reported in Celcius. |
| * |
| * Valid tokens: |
| * |
| * Token Value |
| * "intake" integer - the intake temperature for the VCS |
| * "exhaust" integer - the exhaust temperature for the VCS |
| * "board" integer - the board temperature of the VCS |
| * |
| * Example: |
| * |
| * intake=29, exhaust=46, board=41 |
| * |
| * This attribute must be queried through XNVCTRLQueryTargetStringAttribute() |
| * using a NV_CTRL_TARGET_TYPE_VCSC target. |
| * |
| */ |
| |
| #define NV_CTRL_STRING_VCSC_TEMPERATURES 31 /* R---V */ |
| |
| /* |
| * NV_CTRL_STRING_VCSC_PSU_INFO - returns a string with all Power Supply Unit |
| * related readings in the Visual Computing System, if such a query is |
| * supported. Current in amperes, Power in watts, Voltage in volts and PSU |
| * state may be reported. Not all PSU types support all of these values, and |
| * therefore some readings may be unknown. |
| * |
| * Valid tokens: |
| * |
| * Token Value |
| * "current" integer - the current drawn in amperes by the VCS |
| * "power" integer - the power drawn in watts by the VCS |
| * "voltage" integer - the voltage reading of the VCS |
| * "state" integer - flag to indicate whether PSU is operating normally |
| * |
| * Example: |
| * |
| * current=10, power=15, voltage=unknown, state=normal |
| * |
| * This attribute must be queried through XNVCTRLQueryTargetStringAttribute() |
| * using a NV_CTRL_TARGET_TYPE_VCSC target. |
| * |
| */ |
| |
| #define NV_CTRL_STRING_VCSC_PSU_INFO 32 /* R---V */ |
| |
| /* |
| * NV_CTRL_STRING_GVIO_VIDEO_FORMAT_NAME - query the name for the specified |
| * NV_CTRL_GVIO_VIDEO_FORMAT_*. So that this can be queried with existing |
| * interfaces, XNVCTRLQueryStringAttribute() should be used, and the video |
| * format specified in the display_mask field; eg: |
| * |
| * XNVCTRLQueryStringAttribute(dpy, |
| * screen, |
| * NV_CTRL_GVIO_VIDEO_FORMAT_720P_60_00_SMPTE296, |
| * NV_CTRL_GVIO_VIDEO_FORMAT_NAME, |
| * &name); |
| */ |
| |
| #define NV_CTRL_STRING_GVIO_VIDEO_FORMAT_NAME 33 /* R--GI */ |
| |
| /* |
| * The following is deprecated; use NV_CTRL_STRING_GVIO_VIDEO_FORMAT_NAME, |
| * instead |
| */ |
| #define NV_CTRL_STRING_GVO_VIDEO_FORMAT_NAME 33 /* R--- */ |
| |
| /* |
| * NV_CTRL_STRING_GPU_CURRENT_CLOCK_FREQS - returns a string with the |
| * associated NV Clock, Memory Clock and Processor Clock values. |
| * |
| * Current valid tokens are "nvclock", "memclock", and "processorclock". |
| * Not all tokens will be reported on all GPUs, and additional tokens |
| * may be added in the future. |
| * |
| * Clock values are returned as a comma-separated list of |
| * "token=value" pairs. |
| * Valid tokens: |
| * |
| * Token Value |
| * "nvclock" integer - the GPU clocks (in MHz) for the current |
| * perf level |
| * "memclock" integer - the memory clocks (in MHz) for the current |
| * perf level |
| * "processorclock" integer - the processor clocks (in MHz) for the perf level |
| * |
| * |
| * Example: |
| * |
| * nvclock=459, memclock=400, processorclock=918 |
| * |
| * This attribute may be queried through XNVCTRLQueryTargetStringAttribute() |
| * using an NV_CTRL_TARGET_TYPE_GPU or NV_CTRL_TARGET_TYPE_X_SCREEN target. |
| */ |
| |
| #define NV_CTRL_STRING_GPU_CURRENT_CLOCK_FREQS 34 /* RW-G */ |
| |
| /* |
| * NV_CTRL_STRING_3D_VISION_PRO_TRANSCEIVER_HARDWARE_REVISION - Returns the |
| * hardware revision of the 3D Vision Pro transceiver. |
| */ |
| #define NV_CTRL_STRING_3D_VISION_PRO_TRANSCEIVER_HARDWARE_REVISION 35 /* R--T */ |
| |
| /* |
| * NV_CTRL_STRING_3D_VISION_PRO_TRANSCEIVER_FIRMWARE_VERSION_A - Returns the |
| * firmware version of chip A of the 3D Vision Pro transceiver. |
| */ |
| #define NV_CTRL_STRING_3D_VISION_PRO_TRANSCEIVER_FIRMWARE_VERSION_A 36 /* R--T */ |
| |
| /* |
| * NV_CTRL_STRING_3D_VISION_PRO_TRANSCEIVER_FIRMWARE_DATE_A - Returns the |
| * date of the firmware of chip A of the 3D Vision Pro transceiver. |
| */ |
| #define NV_CTRL_STRING_3D_VISION_PRO_TRANSCEIVER_FIRMWARE_DATE_A 37 /* R--T */ |
| |
| /* |
| * NV_CTRL_STRING_3D_VISION_PRO_TRANSCEIVER_FIRMWARE_VERSION_B - Returns the |
| * firmware version of chip B of the 3D Vision Pro transceiver. |
| */ |
| #define NV_CTRL_STRING_3D_VISION_PRO_TRANSCEIVER_FIRMWARE_VERSION_B 38 /* R--T */ |
| |
| /* |
| * NV_CTRL_STRING_3D_VISION_PRO_TRANSCEIVER_FIRMWARE_DATE_B - Returns the |
| * date of the firmware of chip B of the 3D Vision Pro transceiver. |
| */ |
| #define NV_CTRL_STRING_3D_VISION_PRO_TRANSCEIVER_FIRMWARE_DATE_B 39 /* R--T */ |
| |
| /* |
| * NV_CTRL_STRING_3D_VISION_PRO_TRANSCEIVER_ADDRESS - Returns the RF address |
| * of the 3D Vision Pro transceiver. |
| */ |
| #define NV_CTRL_STRING_3D_VISION_PRO_TRANSCEIVER_ADDRESS 40 /* R--T */ |
| |
| /* |
| * NV_CTRL_STRING_3D_VISION_PRO_GLASSES_FIRMWARE_VERSION_A - Returns the |
| * firmware version of chip A of the glasses. |
| * Use the display_mask parameter to specify the glasses id. |
| */ |
| #define NV_CTRL_STRING_3D_VISION_PRO_GLASSES_FIRMWARE_VERSION_A 41 /* R--T */ |
| |
| /* |
| * NV_CTRL_STRING_3D_VISION_PRO_GLASSES_FIRMWARE_DATE_A - Returns the |
| * date of the firmware of chip A of the glasses. |
| * Use the display_mask parameter to specify the glasses id. |
| */ |
| #define NV_CTRL_STRING_3D_VISION_PRO_GLASSES_FIRMWARE_DATE_A 42 /* R--T */ |
| |
| /* |
| * NV_CTRL_STRING_3D_VISION_PRO_GLASSES_ADDRESS - Returns the RF address |
| * of the glasses. |
| * Use the display_mask parameter to specify the glasses id. |
| */ |
| #define NV_CTRL_STRING_3D_VISION_PRO_GLASSES_ADDRESS 43 /* R--T */ |
| |
| /* |
| * NV_CTRL_STRING_3D_VISION_PRO_GLASSES_NAME - Controls the name the |
| * glasses should use. |
| * Use the display_mask parameter to specify the glasses id. |
| * Glasses' name should start and end with an alpha-numeric character. |
| */ |
| #define NV_CTRL_STRING_3D_VISION_PRO_GLASSES_NAME 44 /* RW-T */ |
| |
| /* |
| * NV_CTRL_STRING_CURRENT_METAMODE_VERSION_2 - Returns the metamode currently |
| * being used by the specified X screen. The MetaMode string has the same |
| * syntax as the MetaMode X configuration option, as documented in the NVIDIA |
| * driver README. Also, see NV_CTRL_BINARY_DATA_METAMODES_VERSION_2 for more |
| * details on the base syntax. |
| * |
| * The returned string may also be prepended with a comma-separated list of |
| * "token=value" pairs, separated from the MetaMode string by "::". |
| */ |
| #define NV_CTRL_STRING_CURRENT_METAMODE_VERSION_2 45 /* RW-- */ |
| |
| /* |
| * NV_CTRL_STRING_DISPLAY_NAME_TYPE_BASENAME - Returns a type name for the |
| * display device ("CRT", "DFP", or "TV"). However, note that the determination |
| * of the name is based on the protocol through which the X driver communicates |
| * to the display device. E.g., if the driver communicates using VGA ,then the |
| * basename is "CRT"; if the driver communicates using TMDS, LVDS, or DP, then |
| * the name is "DFP". |
| */ |
| #define NV_CTRL_STRING_DISPLAY_NAME_TYPE_BASENAME 46 /* R-D- */ |
| |
| /* |
| * NV_CTRL_STRING_DISPLAY_NAME_TYPE_ID - Returns the type-based name + ID for |
| * the display device, e.g. "CRT-0", "DFP-1", "TV-2". If this device is a |
| * DisplayPort 1.2 device, then this name will also be prepended with the |
| * device's port address like so: "DFP-1.0.1.2.3". See |
| * NV_CTRL_STRING_DISPLAY_NAME_TYPE_BASENAME for more information about the |
| * construction of type-based names. |
| */ |
| #define NV_CTRL_STRING_DISPLAY_NAME_TYPE_ID 47 /* R-D- */ |
| |
| /* |
| * NV_CTRL_STRING_DISPLAY_NAME_DP_GUID - Returns the GUID of the DisplayPort |
| * display device. e.g. "DP-GUID-f16a5bde-79f3-11e1-b2ae-8b5a8969ba9c" |
| * |
| * The display device must be a DisplayPort 1.2 device. |
| */ |
| #define NV_CTRL_STRING_DISPLAY_NAME_DP_GUID 48 /* R-D- */ |
| |
| /* |
| * NV_CTRL_STRING_DISPLAY_NAME_EDID_HASH - Returns the SHA-1 hash of the |
| * display device's EDID in 8-4-4-4-12 UID format. e.g. |
| * "DPY-EDID-f16a5bde-79f3-11e1-b2ae-8b5a8969ba9c" |
| * |
| * The display device must have a valid EDID. |
| */ |
| #define NV_CTRL_STRING_DISPLAY_NAME_EDID_HASH 49 /* R-D- */ |
| |
| /* |
| * NV_CTRL_STRING_DISPLAY_NAME_TARGET_INDEX - Returns the current NV-CONTROL |
| * target ID (name) of the display device. e.g. "DPY-1", "DPY-4" |
| * |
| * This name for the display device is not guarenteed to be the same between |
| * different runs of the X server. |
| */ |
| #define NV_CTRL_STRING_DISPLAY_NAME_TARGET_INDEX 50 /* R-D- */ |
| |
| /* |
| * NV_CTRL_STRING_DISPLAY_NAME_RANDR - Returns the RandR output name for the |
| * display device. e.g. "VGA-1", "DVI-I-0", "DVI-D-3", "LVDS-1", "DP-2", |
| * "HDMI-3", "eDP-6". This name should match If this device is a DisplayPort |
| * 1.2 device, then this name will also be prepended with the device's port |
| * address like so: "DVI-I-3.0.1.2.3" |
| */ |
| #define NV_CTRL_STRING_DISPLAY_NAME_RANDR 51 /* R-D- */ |
| |
| #define NV_CTRL_STRING_LAST_ATTRIBUTE NV_CTRL_STRING_DISPLAY_NAME_RANDR |
| |
| /**************************************************************************/ |
| |
| /* |
| * Binary Data Attributes: |
| * |
| * Binary data attributes can be queryied through the XNVCTRLQueryBinaryData() |
| * and XNVCTRLQueryTargetBinaryData() function calls. |
| * |
| * There are currently no binary data attributes that can be set. |
| * |
| * Unless otherwise noted, all Binary data attributes can be queried |
| * using an NV_CTRL_TARGET_TYPE_X_SCREEN target. Attributes that cannot take |
| * an NV_CTRL_TARGET_TYPE_X_SCREEN target also cannot be queried through |
| * XNVCTRLQueryBinaryData() (Since an X Screen target is assumed). |
| */ |
| |
| /* |
| * NV_CTRL_BINARY_DATA_EDID - Returns a display device's EDID information |
| * data. |
| * |
| * This attribute may be queried through XNVCTRLQueryTargetBinaryData() |
| * using a NV_CTRL_TARGET_TYPE_GPU or NV_CTRL_TARGET_TYPE_X_SCREEN target. |
| */ |
| |
| #define NV_CTRL_BINARY_DATA_EDID 0 /* R-DG */ |
| |
| /* |
| * NV_CTRL_BINARY_DATA_MODELINES - Returns a display device's supported |
| * ModeLines. ModeLines are returned in a buffer, separated by a single |
| * '\0' and terminated by two consecutive '\0' s like so: |
| * |
| * "ModeLine 1\0ModeLine 2\0ModeLine 3\0Last ModeLine\0\0" |
| * |
| * This attribute may be queried through XNVCTRLQueryTargetBinaryData() |
| * using a NV_CTRL_TARGET_TYPE_GPU or NV_CTRL_TARGET_TYPE_X_SCREEN target. |
| * |
| * Each ModeLine string may be prepended with a comma-separated list |
| * of "token=value" pairs, separated from the ModeLine string with a |
| * "::". Valid tokens: |
| * |
| * Token Value |
| * "source" "xserver" - the ModeLine is from the core X server |
| * "xconfig" - the ModeLine was specified in the X config file |
| * "builtin" - the NVIDIA driver provided this builtin ModeLine |
| * "vesa" - this is a VESA standard ModeLine |
| * "edid" - the ModeLine was in the display device's EDID |
| * "nv-control" - the ModeLine was specified via NV-CONTROL |
| * |
| * "xconfig-name" - for ModeLines that were specified in the X config |
| * file, this is the name the X config file |
| * gave for the ModeLine. |
| * |
| * Note that a ModeLine can have several sources; the "source" token |
| * can appear multiple times in the "token=value" pairs list. |
| * Additional source values may be specified in the future. |
| * |
| * Additional tokens may be added in the future, so it is recommended |
| * that any token parser processing the returned string from |
| * NV_CTRL_BINARY_DATA_MODELINES be implemented to gracefully ignore |
| * unrecognized tokens. |
| * |
| * E.g., |
| * |
| * "source=xserver, source=vesa, source=edid :: "1024x768_70" 75.0 1024 1048 1184 1328 768 771 |
| * 777 806 -HSync -VSync" |
| * "source=xconfig, xconfig-name=1600x1200_60.00 :: "1600x1200_60_0" 161.0 1600 1704 1880 2160 |
| * 1200 1201 1204 1242 -HSync +VSync" |
| */ |
| |
| #define NV_CTRL_BINARY_DATA_MODELINES 1 /* R-DG */ |
| |
| /* |
| * NV_CTRL_BINARY_DATA_METAMODES - Returns an X Screen's supported |
| * MetaModes. MetaModes are returned in a buffer separated by a |
| * single '\0' and terminated by two consecutive '\0' s like so: |
| * |
| * "MetaMode 1\0MetaMode 2\0MetaMode 3\0Last MetaMode\0\0" |
| * |
| * The MetaMode string should have the same syntax as the MetaMode X |
| * configuration option, as documented in the NVIDIA driver README. |
| |
| * Each MetaMode string may be prepended with a comma-separated list |
| * of "token=value" pairs, separated from the MetaMode string with |
| * "::". Currently, valid tokens are: |
| * |
| * Token Value |
| * "id" <number> - the id of this MetaMode; this is stored in |
| * the Vertical Refresh field, as viewed |
| * by the XRandR and XF86VidMode X * |
| * extensions. |
| * |
| * "switchable" "yes"/"no" - whether this MetaMode may be switched to via |
| * ctrl-alt-+/-; Implicit MetaModes (see |
| * the "IncludeImplicitMetaModes" X |
| * config option), for example, are not |
| * normally made available through |
| * ctrl-alt-+/-. |
| * |
| * "source" "xconfig" - the MetaMode was specified in the X |
| * config file. |
| * "implicit" - the MetaMode was implicitly added; see the |
| * "IncludeImplicitMetaModes" X config option |
| * for details. |
| * "nv-control" - the MetaMode was added via the NV-CONTROL X |
| * extension to the currently running X server. |
| * "RandR" - the MetaMode was modified in response to an |
| * RandR RRSetCrtcConfig request. |
| * |
| * Additional tokens may be added in the future, so it is recommended |
| * that any token parser processing the returned string from |
| * NV_CTRL_BINARY_DATA_METAMODES be implemented to gracefully ignore |
| * unrecognized tokens. |
| * |
| * E.g., |
| * |
| * "id=50, switchable=yes, source=xconfig :: CRT-0: 1024x768 @1024x768 +0+0" |
| */ |
| |
| #define NV_CTRL_BINARY_DATA_METAMODES 2 /* R-D- */ |
| #define NV_CTRL_BINARY_DATA_METAMODES_VERSION_1 NV_CTRL_BINARY_DATA_METAMODES |
| |
| /* |
| * NV_CTRL_BINARY_DATA_XSCREENS_USING_GPU - Returns the list of X |
| * screens currently driven by the given GPU. |
| * |
| * The format of the returned data is: |
| * |
| * 4 CARD32 number of screens |
| * 4 * n CARD32 screen indices |
| * |
| * This attribute can only be queried through XNVCTRLQueryTargetBinaryData() |
| * using a NV_CTRL_TARGET_TYPE_GPU target. This attribute cannot be |
| * queried using a NV_CTRL_TARGET_TYPE_X_SCREEN. |
| */ |
| |
| #define NV_CTRL_BINARY_DATA_XSCREENS_USING_GPU 3 /* R-DG */ |
| |
| /* |
| * NV_CTRL_BINARY_DATA_GPUS_USED_BY_XSCREEN - Returns the list of GPUs |
| * currently in use by the given X screen. |
| * |
| * The format of the returned data is: |
| * |
| * 4 CARD32 number of GPUs |
| * 4 * n CARD32 GPU indices |
| */ |
| |
| #define NV_CTRL_BINARY_DATA_GPUS_USED_BY_XSCREEN 4 /* R--- */ |
| |
| /* |
| * NV_CTRL_BINARY_DATA_GPUS_USING_FRAMELOCK - Returns the list of |
| * GPUs currently connected to the given frame lock board. |
| * |
| * The format of the returned data is: |
| * |
| * 4 CARD32 number of GPUs |
| * 4 * n CARD32 GPU indices |
| * |
| * This attribute can only be queried through XNVCTRLQueryTargetBinaryData() |
| * using a NV_CTRL_TARGET_TYPE_FRAMELOCK target. This attribute cannot be |
| * queried using a NV_CTRL_TARGET_TYPE_X_SCREEN. |
| */ |
| |
| #define NV_CTRL_BINARY_DATA_GPUS_USING_FRAMELOCK 5 /* R-DF */ |
| |
| /* |
| * NV_CTRL_BINARY_DATA_DISPLAY_VIEWPORT - Returns the Display Device's |
| * viewport box into the given X Screen (in X Screen coordinates.) |
| * |
| * The format of the returned data is: |
| * |
| * 4 CARD32 Offset X |
| * 4 CARD32 Offset Y |
| * 4 CARD32 Width |
| * 4 CARD32 Height |
| */ |
| |
| #define NV_CTRL_BINARY_DATA_DISPLAY_VIEWPORT 6 /* R-DG */ |
| |
| /* |
| * NV_CTRL_BINARY_DATA_FRAMELOCKS_USED_BY_GPU - Returns the list of |
| * Framelock devices currently connected to the given GPU. |
| * |
| * The format of the returned data is: |
| * |
| * 4 CARD32 number of Framelocks |
| * 4 * n CARD32 Framelock indices |
| * |
| * This attribute can only be queried through XNVCTRLQueryTargetBinaryData() |
| * using a NV_CTRL_TARGET_TYPE_GPU target. This attribute cannot be |
| * queried using a NV_CTRL_TARGET_TYPE_X_SCREEN. |
| */ |
| |
| #define NV_CTRL_BINARY_DATA_FRAMELOCKS_USED_BY_GPU 7 /* R-DG */ |
| |
| /* |
| * NV_CTRL_BINARY_DATA_GPUS_USING_VCSC - Returns the list of |
| * GPU devices connected to the given VCS. |
| * |
| * The format of the returned data is: |
| * |
| * 4 CARD32 number of GPUs |
| * 4 * n CARD32 GPU indices |
| * |
| * This attribute can only be queried through XNVCTRLQueryTargetBinaryData() |
| * using a NV_CTRL_TARGET_TYPE_VCSC target. This attribute cannot be |
| * queried using a NV_CTRL_TARGET_TYPE_X_SCREEN and cannot be queried using |
| * a NV_CTRL_TARGET_TYPE_X_GPU |
| */ |
| |
| #define NV_CTRL_BINARY_DATA_GPUS_USING_VCSC 8 /* R-DV */ |
| |
| /* |
| * NV_CTRL_BINARY_DATA_VCSCS_USED_BY_GPU - Returns the VCSC device |
| * that is controlling the given GPU. |
| * |
| * The format of the returned data is: |
| * |
| * 4 CARD32 number of VCS (always 1) |
| * 4 * n CARD32 VCS indices |
| * |
| * This attribute can only be queried through XNVCTRLQueryTargetBinaryData() |
| * using a NV_CTRL_TARGET_TYPE_GPU target. This attribute cannot be |
| * queried using a NV_CTRL_TARGET_TYPE_X_SCREEN |
| */ |
| |
| #define NV_CTRL_BINARY_DATA_VCSCS_USED_BY_GPU 9 /* R-DG */ |
| |
| /* |
| * NV_CTRL_BINARY_DATA_COOLERS_USED_BY_GPU - Returns the coolers that |
| * are cooling the given GPU. |
| * |
| * The format of the returned data is: |
| * |
| * 4 CARD32 number of COOLER |
| * 4 * n CARD32 COOLER indices |
| * |
| * This attribute can only be queried through XNVCTRLQueryTargetBinaryData() |
| * using a NV_CTRL_TARGET_TYPE_GPU target. This attribute cannot be |
| * queried using a NV_CTRL_TARGET_TYPE_X_SCREEN |
| */ |
| |
| #define NV_CTRL_BINARY_DATA_COOLERS_USED_BY_GPU 10 /* R-DG */ |
| |
| /* |
| * NV_CTRL_BINARY_DATA_GPUS_USED_BY_LOGICAL_XSCREEN - Returns the list of |
| * GPUs currently driving the given X screen. If Xinerama is enabled, this |
| * will return all GPUs that are driving any X screen. |
| * |
| * The format of the returned data is: |
| * |
| * 4 CARD32 number of GPUs |
| * 4 * n CARD32 GPU indices |
| */ |
| |
| #define NV_CTRL_BINARY_DATA_GPUS_USED_BY_LOGICAL_XSCREEN 11 /* R--- */ |
| |
| /* |
| * NV_CTRL_BINARY_DATA_THERMAL_SENSORS_USED_BY_GPU - Returns the sensors that |
| * are attached to the given GPU. |
| * |
| * The format of the returned data is: |
| * |
| * 4 CARD32 number of SENSOR |
| * 4 * n CARD32 SENSOR indices |
| * |
| * This attribute can only be queried through XNVCTRLQueryTargetBinaryData() |
| * using a NV_CTRL_TARGET_TYPE_GPU target. This attribute cannot be |
| * queried using a NV_CTRL_TARGET_TYPE_X_SCREEN |
| */ |
| |
| #define NV_CTRL_BINARY_DATA_THERMAL_SENSORS_USED_BY_GPU 12 /* R--G */ |
| |
| /* |
| * NV_CTRL_BINARY_DATA_GLASSES_PAIRED_TO_3D_VISION_PRO_TRANSCEIVER - Returns |
| * the id of the glasses that are currently paired to the given |
| * 3D Vision Pro transceiver. |
| * |
| * The format of the returned data is: |
| * |
| * 4 CARD32 number of glasses |
| * 4 * n CARD32 id of glasses |
| * |
| * This attribute can only be queried through XNVCTRLQueryTargetBinaryData() |
| * using a NV_CTRL_TARGET_TYPE_3D_VISION_PRO_TRANSCEIVER target. |
| */ |
| #define NV_CTRL_BINARY_DATA_GLASSES_PAIRED_TO_3D_VISION_PRO_TRANSCEIVER 13 /* R--T */ |
| |
| /* |
| * NV_CTRL_BINARY_DATA_DISPLAY_TARGETS - Returns all the display devices |
| * currently connected to any GPU on the X server. |
| * |
| * The format of the returned data is: |
| * |
| * 4 CARD32 number of display devices |
| * 4 * n CARD32 display device indices |
| * |
| * This attribute can only be queried through XNVCTRLQueryTargetBinaryData(). |
| */ |
| |
| #define NV_CTRL_BINARY_DATA_DISPLAY_TARGETS 14 /* R--- */ |
| |
| /* |
| * NV_CTRL_BINARY_DATA_DISPLAYS_CONNECTED_TO_GPU - Returns the list of |
| * display devices that are connected to the GPU target. |
| * |
| * The format of the returned data is: |
| * |
| * 4 CARD32 number of display devices |
| * 4 * n CARD32 display device indices |
| * |
| * This attribute can only be queried through XNVCTRLQueryTargetBinaryData() |
| * using a NV_CTRL_TARGET_TYPE_GPU target. |
| */ |
| |
| #define NV_CTRL_BINARY_DATA_DISPLAYS_CONNECTED_TO_GPU 15 /* R--G */ |
| |
| /* |
| * NV_CTRL_BINARY_DATA_METAMODES_VERSION_2 - Returns values similar to |
| * NV_CTRL_BINARY_DATA_METAMODES(_VERSION_1) but also returns extended syntax |
| * information to indicate a specific display device, as well as other per- |
| * display deviceflags as "token=value" pairs. For example: |
| * |
| * "DPY-1: 1280x1024 {Stereo=PassiveLeft}, |
| * DPY-2: 1280x1024 {Stereo=PassiveRight}," |
| * |
| * The display device names have the form "DPY-%d", where the integer |
| * part of the name is the NV-CONTROL target ID for that display device |
| * for this instance of the X server. Note that display device NV-CONTROL |
| * target IDs are not guaranteed to be the same from one run of the X |
| * server to the next. |
| */ |
| |
| #define NV_CTRL_BINARY_DATA_METAMODES_VERSION_2 16 /* R-D- */ |
| |
| /* |
| * NV_CTRL_BINARY_DATA_DISPLAYS_ENABLED_ON_XSCREEN - Returns the list of |
| * display devices that are currently scanning out the X screen target. |
| * |
| * The format of the returned data is: |
| * |
| * 4 CARD32 number of display devices |
| * 4 * n CARD32 display device indices |
| * |
| * This attribute can only be queried through XNVCTRLQueryTargetBinaryData() |
| * using a NV_CTRL_TARGET_TYPE_X_SCREEN target. |
| */ |
| |
| #define NV_CTRL_BINARY_DATA_DISPLAYS_ENABLED_ON_XSCREEN 17 /* R--- */ |
| |
| #define NV_CTRL_BINARY_DATA_LAST_ATTRIBUTE NV_CTRL_BINARY_DATA_DISPLAYS_ENABLED_ON_XSCREEN |
| |
| /**************************************************************************/ |
| |
| /* |
| * String Operation Attributes: |
| * |
| * These attributes are used with the XNVCTRLStringOperation() |
| * function; a string is specified as input, and a string is returned |
| * as output. |
| * |
| * Unless otherwise noted, all attributes can be operated upon using |
| * an NV_CTRL_TARGET_TYPE_X_SCREEN target. |
| */ |
| |
| /* |
| * NV_CTRL_STRING_OPERATION_ADD_METAMODE - provide a MetaMode string |
| * as input, and returns a string containing comma-separated list of |
| * "token=value" pairs as output. Currently, the only output token is |
| * "id", which indicates the id that was assigned to the MetaMode. |
| * |
| * All ModeLines referenced in the MetaMode must already exist for |
| * each display device (as returned by the |
| * NV_CTRL_BINARY_DATA_MODELINES attribute). |
| * |
| * The MetaMode string should have the same syntax as the MetaMode X |
| * configuration option, as documented in the NVIDIA driver README. |
| * |
| * The input string can optionally be prepended with a string of |
| * comma-separated "token=value" pairs, separated from the MetaMode |
| * string by "::". Currently, the only valid token is "index" which |
| * indicates the insertion index for the MetaMode. |
| * |
| * E.g., |
| * |
| * Input: "index=5 :: 1600x1200+0+0, 1600x1200+1600+0" |
| * Output: "id=58" |
| * |
| * which causes the MetaMode to be inserted at position 5 in the |
| * MetaMode list (all entries after 5 will be shifted down one slot in |
| * the list), and the X server's containing mode stores 58 as the |
| * VRefresh, so that the MetaMode can be uniquely identifed through |
| * XRandR and XF86VidMode. |
| */ |
| |
| #define NV_CTRL_STRING_OPERATION_ADD_METAMODE 0 |
| |
| /* |
| * NV_CTRL_STRING_OPERATION_GTF_MODELINE - provide as input a string |
| * of comma-separated "token=value" pairs, and returns a ModeLine |
| * string, computed using the GTF formula using the parameters from |
| * the input string. Valid tokens for the input string are "width", |
| * "height", and "refreshrate". |
| * |
| * E.g., |
| * |
| * Input: "width=1600, height=1200, refreshrate=60" |
| * Output: "160.96 1600 1704 1880 2160 1200 1201 1204 1242 -HSync +VSync" |
| * |
| * This operation does not have any impact on any display device's |
| * modePool, and the ModeLine is not validated; it is simply intended |
| * for generating ModeLines. |
| */ |
| |
| #define NV_CTRL_STRING_OPERATION_GTF_MODELINE 1 |
| |
| /* |
| * NV_CTRL_STRING_OPERATION_CVT_MODELINE - provide as input a string |
| * of comma-separated "token=value" pairs, and returns a ModeLine |
| * string, computed using the CVT formula using the parameters from |
| * the input string. Valid tokens for the input string are "width", |
| * "height", "refreshrate", and "reduced-blanking". The |
| * "reduced-blanking" argument can be "0" or "1", to enable or disable |
| * use of reduced blanking for the CVT formula. |
| * |
| * E.g., |
| * |
| * Input: "width=1600, height=1200, refreshrate=60, reduced-blanking=1" |
| * Output: "130.25 1600 1648 1680 1760 1200 1203 1207 1235 +HSync -VSync" |
| * |
| * This operation does not have any impact on any display device's |
| * modePool, and the ModeLine is not validated; it is simply intended |
| * for generating ModeLines. |
| */ |
| |
| #define NV_CTRL_STRING_OPERATION_CVT_MODELINE 2 |
| |
| /* |
| * NV_CTRL_STRING_OPERATION_BUILD_MODEPOOL - build a ModePool for the |
| * specified display device on the specified target (either an X |
| * screen or a GPU). This is typically used to generate a ModePool |
| * for a display device on a GPU on which no X screens are present. |
| * |
| * Currently, a display device's ModePool is static for the life of |
| * the X server, so XNVCTRLStringOperation will return FALSE if |
| * requested to build a ModePool on a display device that already has |
| * a ModePool. |
| * |
| * The string input to BUILD_MODEPOOL may be NULL. If it is not NULL, |
| * then it is interpreted as a double-colon ("::") separated list |
| * of "option=value" pairs, where the options and the syntax of their |
| * values are the X configuration options that impact the behavior of |
| * modePool construction; namely: |
| * |
| * "ModeValidation" |
| * "HorizSync" |
| * "VertRefresh" |
| * "FlatPanelProperties" |
| * "TVStandard" |
| * "ExactModeTimingsDVI" |
| * "UseEdidFreqs" |
| * |
| * An example input string might look like: |
| * |
| * "ModeValidation=NoVesaModes :: HorizSync=50-110 :: VertRefresh=50-150" |
| * |
| * This request currently does not return a string. |
| */ |
| |
| #define NV_CTRL_STRING_OPERATION_BUILD_MODEPOOL 3 /* DG */ |
| |
| /* |
| * NV_CTRL_STRING_OPERATION_GVI_CONFIGURE_STREAMS - Configure the streams- |
| * to-jack+channel topology for a GVI (Graphics capture board). |
| * |
| * The string input to GVI_CONFIGURE_STREAMS may be NULL. If this is the |
| * case, then the current topology is returned. |
| * |
| * If the input string to GVI_CONFIGURE_STREAMS is not NULL, the string |
| * is interpreted as a semicolon (";") separated list of comma-separated |
| * lists of "option=value" pairs that define a stream's composition. The |
| * available options and their values are: |
| * |
| * "stream": Defines which stream this comma-separated list describes. |
| * Valid values are the integers between 0 and |
| * NV_CTRL_GVI_NUM_STREAMS-1 (inclusive). |
| * |
| * "linkN": Defines a jack+channel pair to use for the given link N. |
| * Valid options are the string "linkN", where N is an integer |
| * between 0 and NV_CTRL_GVI_MAX_LINKS_PER_STREAM-1 (inclusive). |
| * Valid values for these options are strings of the form |
| * "jackX" and/or "jackX.Y", where X is an integer between 0 and |
| * NV_CTRL_GVI_NUM_JACKS-1 (inclusive), and Y (optional) is an |
| * integer between 0 and NV_CTRL_GVI_MAX_CHANNELS_PER_JACK-1 |
| * (inclusive). |
| * |
| * An example input string might look like: |
| * |
| * "stream=0, link0=jack0, link1=jack1; stream=1, link0=jack2.1" |
| * |
| * This example specifies two streams, stream 0 and stream 1. Stream 0 |
| * is defined to capture link0 data from the first channel (channel 0) of |
| * BNC jack 0 and link1 data from the first channel of BNC jack 1. The |
| * second stream (Stream 1) is defined to capture link0 data from channel 1 |
| * (second channel) of BNC jack 2. |
| * |
| * This example shows a possible configuration for capturing 3G input: |
| * |
| * "stream=0, link0=jack0.0, link1=jack0.1" |
| * |
| * Applications should query the following attributes to determine |
| * possible combinations: |
| * |
| * NV_CTRL_GVI_MAX_STREAMS |
| * NV_CTRL_GVI_MAX_LINKS_PER_STREAM |
| * NV_CTRL_GVI_NUM_JACKS |
| * NV_CTRL_GVI_MAX_CHANNELS_PER_JACK |
| * |
| * Note: A jack+channel pair can only be tied to one link/stream. |
| * |
| * Upon successful configuration or querying of this attribute, a string |
| * representing the current topology for all known streams on the device |
| * will be returned. On failure, NULL is returned. |
| * |
| * Note: Setting this attribute may also result in the following |
| * NV-CONTROL attributes being reset on the GVI device (to ensure |
| * the configuration remains valid): |
| * NV_CTRL_GVIO_REQUESTED_VIDEO_FORMAT |
| * NV_CTRL_GVI_REQUESTED_STREAM_BITS_PER_COMPONENT |
| * NV_CTRL_GVI_REQUESTED_STREAM_COMPONENT_SAMPLING |
| */ |
| |
| #define NV_CTRL_STRING_OPERATION_GVI_CONFIGURE_STREAMS 4 /* RW-I */ |
| |
| #define NV_CTRL_STRING_OPERATION_LAST_ATTRIBUTE NV_CTRL_STRING_OPERATION_GVI_CONFIGURE_STREAMS |
| |
| /**************************************************************************/ |
| |
| /* |
| * CTRLAttributeValidValuesRec - |
| * |
| * structure and related defines used by |
| * XNVCTRLQueryValidAttributeValues() to describe the valid values of |
| * a particular attribute. The type field will be one of: |
| * |
| * ATTRIBUTE_TYPE_INTEGER : the attribute is an integer value; there |
| * is no fixed range of valid values. |
| * |
| * ATTRIBUTE_TYPE_BITMASK : the attribute is an integer value, |
| * interpretted as a bitmask. |
| * |
| * ATTRIBUTE_TYPE_BOOL : the attribute is a boolean, valid values are |
| * either 1 (on/true) or 0 (off/false). |
| * |
| * ATTRIBUTE_TYPE_RANGE : the attribute can have any integer value |
| * between NVCTRLAttributeValidValues.u.range.min and |
| * NVCTRLAttributeValidValues.u.range.max (inclusive). |
| * |
| * ATTRIBUTE_TYPE_INT_BITS : the attribute can only have certain |
| * integer values, indicated by which bits in |
| * NVCTRLAttributeValidValues.u.bits.ints are on (for example: if bit |
| * 0 is on, then 0 is a valid value; if bit 5 is on, then 5 is a valid |
| * value, etc). This is useful for attributes like NV_CTRL_FSAA_MODE, |
| * which can only have certain values, depending on GPU. |
| * |
| * ATTRIBUTE_TYPE_64BIT_INTEGER : the attribute is a 64 bit integer value; |
| * there is no fixed range of valid values. |
| * |
| * ATTRIBUTE_TYPE_STRING : the attribute is a string value; there is no fixed |
| * range of valid values. |
| * |
| * ATTRIBUTE_TYPE_BINARY_DATA : the attribute is binary data; there is |
| * no fixed range of valid values. |
| * |
| * ATTRIBUTE_TYPE_STRING_OPERATION : the attribute is a string; there is |
| * no fixed range of valid values. |
| * |
| * |
| * The permissions field of NVCTRLAttributeValidValuesRec is a bitmask |
| * that may contain: |
| * |
| * ATTRIBUTE_TYPE_READ - Attribute may be read (queried.) |
| * ATTRIBUTE_TYPE_WRITE - Attribute may be written to (set.) |
| * ATTRIBUTE_TYPE_DISPLAY - Attribute is valid for display target types |
| * (requires a display_mask if queried via |
| * a GPU or X screen.) |
| * ATTRIBUTE_TYPE_GPU - Attribute is valid for GPU target types. |
| * ATTRIBUTE_TYPE_FRAMELOCK - Attribute is valid for Frame Lock target types. |
| * ATTRIBUTE_TYPE_X_SCREEN - Attribute is valid for X Screen target types. |
| * ATTRIBUTE_TYPE_XINERAMA - Attribute will be made consistent for all |
| * X Screens when the Xinerama extension is enabled. |
| * ATTRIBUTE_TYPE_VCSC - Attribute is valid for Visual Computing System |
| * target types. |
| * ATTRIBUTE_TYPE_GVI - Attribute is valid for Graphics Video In target |
| * types. |
| * ATTRIBUTE_TYPE_COOLER - Attribute is valid for Cooler target types. |
| * ATTRIBUTE_TYPE_3D_VISION_PRO_TRANSCEIVER - Attribute is valid for 3D Vision |
| * Pro Transceiver target types. |
| * |
| * See 'Key to Integer Attribute "Permissions"' at the top of this |
| * file for a description of what these permission bits mean. |
| */ |
| |
| #define ATTRIBUTE_TYPE_UNKNOWN 0 |
| #define ATTRIBUTE_TYPE_INTEGER 1 |
| #define ATTRIBUTE_TYPE_BITMASK 2 |
| #define ATTRIBUTE_TYPE_BOOL 3 |
| #define ATTRIBUTE_TYPE_RANGE 4 |
| #define ATTRIBUTE_TYPE_INT_BITS 5 |
| #define ATTRIBUTE_TYPE_64BIT_INTEGER 6 |
| #define ATTRIBUTE_TYPE_STRING 7 |
| #define ATTRIBUTE_TYPE_BINARY_DATA 8 |
| #define ATTRIBUTE_TYPE_STRING_OPERATION 9 |
| |
| #define ATTRIBUTE_TYPE_READ 0x001 |
| #define ATTRIBUTE_TYPE_WRITE 0x002 |
| #define ATTRIBUTE_TYPE_DISPLAY 0x004 |
| #define ATTRIBUTE_TYPE_GPU 0x008 |
| #define ATTRIBUTE_TYPE_FRAMELOCK 0x010 |
| #define ATTRIBUTE_TYPE_X_SCREEN 0x020 |
| #define ATTRIBUTE_TYPE_XINERAMA 0x040 |
| #define ATTRIBUTE_TYPE_VCSC 0x080 |
| #define ATTRIBUTE_TYPE_GVI 0x100 |
| #define ATTRIBUTE_TYPE_COOLER 0x200 |
| #define ATTRIBUTE_TYPE_THERMAL_SENSOR 0x400 |
| #define ATTRIBUTE_TYPE_3D_VISION_PRO_TRANSCEIVER 0x800 |
| |
| #define ATTRIBUTE_TYPE_ALL_TARGETS \ |
| ((ATTRIBUTE_TYPE_DISPLAY) | (ATTRIBUTE_TYPE_GPU) | (ATTRIBUTE_TYPE_FRAMELOCK) | \ |
| (ATTRIBUTE_TYPE_X_SCREEN) | (ATTRIBUTE_TYPE_VCSC) | (ATTRIBUTE_TYPE_GVI) | \ |
| (ATTRIBUTE_TYPE_COOLER) | (ATTRIBUTE_TYPE_THERMAL_SENSOR) | \ |
| (ATTRIBUTE_TYPE_3D_VISION_PRO_TRANSCEIVER)) |
| |
| typedef struct _NVCTRLAttributeValidValues |
| { |
| int type; |
| union |
| { |
| struct |
| { |
| int64_t min; |
| int64_t max; |
| } range; |
| struct |
| { |
| unsigned int ints; |
| } bits; |
| } u; |
| unsigned int permissions; |
| } NVCTRLAttributeValidValuesRec; |
| |
| typedef struct _NVCTRLAttributePermissions |
| { |
| int type; |
| unsigned int permissions; |
| } NVCTRLAttributePermissionsRec; |
| |
| /**************************************************************************/ |
| |
| /* |
| * NV-CONTROL X event notification. |
| * |
| * To receive X event notifications dealing with NV-CONTROL, you should |
| * call XNVCtrlSelectNotify() with one of the following set as the type |
| * of event to receive (see NVCtrlLib.h for more information): |
| */ |
| |
| #define ATTRIBUTE_CHANGED_EVENT 0 |
| #define TARGET_ATTRIBUTE_CHANGED_EVENT 1 |
| #define TARGET_ATTRIBUTE_AVAILABILITY_CHANGED_EVENT 2 |
| #define TARGET_STRING_ATTRIBUTE_CHANGED_EVENT 3 |
| #define TARGET_BINARY_ATTRIBUTE_CHANGED_EVENT 4 |
| |
| #endif /* __NVCTRL_H */ |
