| This test checks the SVGAngle API |
| |
| On success, you will see a series of "PASS" messages, followed by "TEST COMPLETE". |
| |
| |
| |
| Check initial angle values |
| PASS angle.unitType is SVGAngle.SVG_ANGLETYPE_UNSPECIFIED |
| PASS angle.valueAsString is "0" |
| PASS angle.value is 0 |
| PASS angle.valueInSpecifiedUnits is 0 |
| |
| Check invalid arguments for 'convertToSpecifiedUnits' |
| PASS angle.convertToSpecifiedUnits(SVGAngle.SVG_ANGLETYPE_UNKNOWN) threw exception NotSupportedError: The operation is not supported.. |
| PASS angle.convertToSpecifiedUnits(-1) threw exception NotSupportedError: The operation is not supported.. |
| PASS angle.convertToSpecifiedUnits(5) threw exception NotSupportedError: The operation is not supported.. |
| PASS angle.convertToSpecifiedUnits('aString') threw exception NotSupportedError: The operation is not supported.. |
| PASS angle.convertToSpecifiedUnits(angle) threw exception NotSupportedError: The operation is not supported.. |
| PASS angle.convertToSpecifiedUnits(svgElement) threw exception NotSupportedError: The operation is not supported.. |
| PASS angle.convertToSpecifiedUnits() threw exception TypeError: Not enough arguments. |
| PASS angle.unitType is SVGAngle.SVG_ANGLETYPE_UNSPECIFIED |
| |
| Check valid arguments for 'convertToSpecifiedUnits', that should only modify the 'valueAsString' |
| PASS angle.convertToSpecifiedUnits(SVGAngle.SVG_ANGLETYPE_RAD) is undefined. |
| PASS angle.valueAsString is "0rad" |
| PASS angle.value is 0 |
| PASS angle.valueInSpecifiedUnits is 0 |
| PASS angle.unitType is SVGAngle.SVG_ANGLETYPE_RAD |
| PASS angle.convertToSpecifiedUnits(SVGAngle.SVG_ANGLETYPE_GRAD) is undefined. |
| PASS angle.valueAsString is "0grad" |
| PASS angle.value is 0 |
| PASS angle.valueInSpecifiedUnits is 0 |
| PASS angle.unitType is SVGAngle.SVG_ANGLETYPE_GRAD |
| PASS angle.convertToSpecifiedUnits(SVGAngle.SVG_ANGLETYPE_DEG) is undefined. |
| PASS angle.valueAsString is "0deg" |
| PASS angle.value is 0 |
| PASS angle.valueInSpecifiedUnits is 0 |
| PASS angle.unitType is SVGAngle.SVG_ANGLETYPE_DEG |
| PASS angle.convertToSpecifiedUnits(SVGAngle.SVG_ANGLETYPE_UNSPECIFIED) is undefined. |
| PASS angle.valueAsString is "0" |
| PASS angle.value is 0 |
| PASS angle.valueInSpecifiedUnits is 0 |
| PASS angle.unitType is SVGAngle.SVG_ANGLETYPE_UNSPECIFIED |
| |
| Check invalid arguments for 'newValueSpecifiedUnits' |
| PASS angle.newValueSpecifiedUnits(SVGAngle.SVG_ANGLETYPE_UNKNOWN, 50) threw exception NotSupportedError: The operation is not supported.. |
| PASS angle.newValueSpecifiedUnits(-1, 50) threw exception NotSupportedError: The operation is not supported.. |
| PASS angle.newValueSpecifiedUnits(5, 50) threw exception NotSupportedError: The operation is not supported.. |
| PASS angle.newValueSpecifiedUnits(SVGAngle.SVG_ANGLETYPE_DEG) threw exception TypeError: Not enough arguments. |
| PASS angle.newValueSpecifiedUnits(SVGAngle.SVG_ANGLETYPE_DEG, 'aString') is undefined. |
| PASS angle.value is NaN |
| PASS angle.newValueSpecifiedUnits(SVGAngle.SVG_ANGLETYPE_DEG, 0) is undefined. |
| PASS angle.newValueSpecifiedUnits(SVGAngle.SVG_ANGLETYPE_DEG, angle) is undefined. |
| PASS angle.value is NaN |
| PASS angle.newValueSpecifiedUnits(SVGAngle.SVG_ANGLETYPE_DEG, svgElement) is undefined. |
| PASS angle.value is NaN |
| PASS angle.newValueSpecifiedUnits(SVGAngle.SVG_ANGLETYPE_DEG) threw exception TypeError: Not enough arguments. |
| PASS angle.newValueSpecifiedUnits('aString', 4) threw exception NotSupportedError: The operation is not supported.. |
| PASS angle.newValueSpecifiedUnits(angle, 4) threw exception NotSupportedError: The operation is not supported.. |
| PASS angle.newValueSpecifiedUnits(svgElement, 4) threw exception NotSupportedError: The operation is not supported.. |
| PASS angle.newValueSpecifiedUnits('aString', 'aString') threw exception NotSupportedError: The operation is not supported.. |
| PASS angle.newValueSpecifiedUnits(angle, angle) threw exception NotSupportedError: The operation is not supported.. |
| PASS angle.newValueSpecifiedUnits(svgElement, svgElement) threw exception NotSupportedError: The operation is not supported.. |
| PASS angle.newValueSpecifiedUnits() threw exception TypeError: Not enough arguments. |
| PASS angle.unitType is SVGAngle.SVG_ANGLETYPE_DEG |
| |
| Check valid arguments for 'newValueSpecifiedUnits', that should only modify the 'valueAsString' |
| PASS angle.newValueSpecifiedUnits(SVGAngle.SVG_ANGLETYPE_RAD, parseFloat(Math.PI.toFixed(5))) is undefined. |
| PASS angle.valueAsString.slice(-3) is "rad" |
| PASS angle.value.toFixed(1) is "180.0" |
| PASS angle.valueInSpecifiedUnits.toFixed(5) is Math.PI.toFixed(5) |
| PASS angle.unitType is SVGAngle.SVG_ANGLETYPE_RAD |
| PASS angle.newValueSpecifiedUnits(SVGAngle.SVG_ANGLETYPE_GRAD, 400) is undefined. |
| PASS angle.valueAsString is "400grad" |
| PASS angle.value.toFixed(1) is "360.0" |
| PASS angle.valueInSpecifiedUnits is 400 |
| PASS angle.unitType is SVGAngle.SVG_ANGLETYPE_GRAD |
| PASS angle.newValueSpecifiedUnits(SVGAngle.SVG_ANGLETYPE_DEG, 360) is undefined. |
| PASS angle.valueAsString is "360deg" |
| PASS angle.value is 360 |
| PASS angle.valueInSpecifiedUnits is 360 |
| PASS angle.unitType is SVGAngle.SVG_ANGLETYPE_DEG |
| PASS angle.newValueSpecifiedUnits(SVGAngle.SVG_ANGLETYPE_UNSPECIFIED, 180) is undefined. |
| PASS angle.valueAsString is "180" |
| PASS angle.value is 180 |
| PASS angle.valueInSpecifiedUnits is 180 |
| PASS angle.unitType is SVGAngle.SVG_ANGLETYPE_UNSPECIFIED |
| |
| Reset to initial angle state |
| PASS angle.newValueSpecifiedUnits(SVGAngle.SVG_ANGLETYPE_UNSPECIFIED, 0) is undefined. |
| PASS angle.unitType is SVGAngle.SVG_ANGLETYPE_UNSPECIFIED |
| |
| Check setting invalid 'valueAsString' arguments |
| PASS angle.valueAsString = '10px' threw exception SyntaxError: The string did not match the expected pattern.. |
| PASS angle.valueAsString is "0" |
| PASS angle.value is 0 |
| PASS angle.valueInSpecifiedUnits is 0 |
| PASS angle.unitType is SVGAngle.SVG_ANGLETYPE_UNSPECIFIED |
| PASS angle.valueAsString = '10x' threw exception SyntaxError: The string did not match the expected pattern.. |
| PASS angle.valueAsString is "0" |
| PASS angle.value is 0 |
| PASS angle.valueInSpecifiedUnits is 0 |
| PASS angle.unitType is SVGAngle.SVG_ANGLETYPE_UNSPECIFIED |
| PASS angle.valueAsString = '5graD' threw exception SyntaxError: The string did not match the expected pattern.. |
| PASS angle.valueAsString is "0" |
| PASS angle.value is 0 |
| PASS angle.valueInSpecifiedUnits is 0 |
| PASS angle.unitType is SVGAngle.SVG_ANGLETYPE_UNSPECIFIED |
| PASS angle.valueAsString = '5Rad' threw exception SyntaxError: The string did not match the expected pattern.. |
| PASS angle.valueAsString is "0" |
| PASS angle.value is 0 |
| PASS angle.valueInSpecifiedUnits is 0 |
| PASS angle.unitType is SVGAngle.SVG_ANGLETYPE_UNSPECIFIED |
| PASS angle.valueAsString = ',5 rad' threw exception SyntaxError: The string did not match the expected pattern.. |
| PASS angle.valueAsString is "0" |
| PASS angle.value is 0 |
| PASS angle.valueInSpecifiedUnits is 0 |
| PASS angle.unitType is SVGAngle.SVG_ANGLETYPE_UNSPECIFIED |
| |
| Check setting invalid 'valueInSpecifiedUnits' arguments |
| PASS angle.valueInSpecifiedUnits = 'test' is 'test' |
| PASS angle.value is NaN |
| PASS angle.valueInSpecifiedUnits is NaN |
| PASS angle.unitType is SVGAngle.SVG_ANGLETYPE_UNSPECIFIED |
| PASS angle.valueInSpecifiedUnits = 0 is 0 |
| PASS angle.valueInSpecifiedUnits = angle is angle |
| PASS angle.value is NaN |
| PASS angle.valueInSpecifiedUnits is NaN |
| PASS angle.unitType is SVGAngle.SVG_ANGLETYPE_UNSPECIFIED |
| |
| Check setting invalid 'value' arguments |
| PASS angle.value = 0 is 0 |
| PASS angle.value = 'test' is 'test' |
| PASS angle.value is NaN |
| PASS angle.valueInSpecifiedUnits is NaN |
| PASS angle.unitType is SVGAngle.SVG_ANGLETYPE_UNSPECIFIED |
| PASS angle.value = 0 is 0 |
| PASS angle.value = angle is angle |
| PASS angle.value is NaN |
| PASS angle.valueInSpecifiedUnits is NaN |
| PASS angle.unitType is SVGAngle.SVG_ANGLETYPE_UNSPECIFIED |
| |
| Reset to angle in degree units |
| PASS angle.newValueSpecifiedUnits(SVGAngle.SVG_ANGLETYPE_DEG, 0) is undefined. |
| PASS angle.unitType is SVGAngle.SVG_ANGLETYPE_DEG |
| |
| Check setting valid 'value' arguments, assure that 'valueInSpecifiedUnits' and 'valueAsString' are synchronized |
| PASS angle.value = 50 is 50 |
| PASS angle.valueInSpecifiedUnits is 50 |
| PASS angle.valueAsString is "50deg" |
| PASS angle.unitType is SVGAngle.SVG_ANGLETYPE_DEG |
| |
| Try modifiying the readonly 'unitType', needs to fail |
| PASS angle.unitType = SVGAngle.SVG_ANGLETTYE_RAD is undefined. |
| PASS angle.unitType is SVGAngle.SVG_ANGLETYPE_DEG |
| |
| Check setting valid 'valueInSpecifiedUnits' arguments, assure that 'value' and 'valueAsString' are synchronized |
| PASS angle.valueInSpecifiedUnits = 100 is 100 |
| PASS angle.value is 100 |
| PASS angle.valueAsString is "100deg" |
| PASS angle.unitType is SVGAngle.SVG_ANGLETYPE_DEG |
| |
| Check setting valid 'valueAsString' arguments, assure that 'value' and 'valueInSpecifiedUnits' are synchronized |
| PASS angle.valueAsString = '200grad' is "200grad" |
| PASS angle.valueInSpecifiedUnits is 200 |
| PASS angle.value.toFixed(1) is "180.0" |
| PASS angle.unitType is SVGAngle.SVG_ANGLETYPE_GRAD |
| |
| Now convert the GRAD value into a RAD value, and assure that all properties have been synchronized |
| PASS angle.convertToSpecifiedUnits(SVGAngle.SVG_ANGLETYPE_RAD) is undefined. |
| PASS angle.value.toFixed(1) is "180.0" |
| PASS angle.valueInSpecifiedUnits.toFixed(5) is "3.14159" |
| PASS angle.valueAsString.slice(-3) is "rad" |
| PASS angle.unitType is SVGAngle.SVG_ANGLETYPE_RAD |
| |
| Now try converting the RAD value into an unknown value, that should fail and throw |
| PASS angle.convertToSpecifiedUnits(SVGAngle.SVG_ANGLETYPE_UNKNOWN) threw exception NotSupportedError: The operation is not supported.. |
| PASS angle.value.toFixed(1) is "180.0" |
| PASS angle.valueInSpecifiedUnits.toFixed(5) is "3.14159" |
| PASS angle.valueAsString.slice(-3) is "rad" |
| PASS angle.unitType is SVGAngle.SVG_ANGLETYPE_RAD |
| |
| Now convert the RAD value into a DEG value, and assure that all properties have been synchronized |
| PASS angle.convertToSpecifiedUnits(SVGAngle.SVG_ANGLETYPE_DEG) is undefined. |
| PASS angle.value.toFixed(1) is "180.0" |
| PASS angle.valueInSpecifiedUnits.toFixed(1) is "180.0" |
| PASS angle.valueAsString is "180deg" |
| PASS angle.unitType is SVGAngle.SVG_ANGLETYPE_DEG |
| PASS successfullyParsed is true |
| |
| TEST COMPLETE |
| |
