| /* |
| * Copyright (C) 2011 Adobe Systems Incorporated. All rights reserved. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions |
| * are met: |
| * |
| * 1. Redistributions of source code must retain the above |
| * copyright notice, this list of conditions and the following |
| * disclaimer. |
| * 2. Redistributions in binary form must reproduce the above |
| * copyright notice, this list of conditions and the following |
| * disclaimer in the documentation and/or other materials |
| * provided with the distribution. |
| * |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDER "AS IS" AND ANY |
| * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE |
| * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR |
| * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER BE |
| * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, |
| * OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, |
| * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR |
| * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY |
| * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR |
| * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF |
| * THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF |
| * SUCH DAMAGE. |
| */ |
| |
| #include "config.h" |
| |
| #include "RenderFlowThread.h" |
| |
| #include "FlowThreadController.h" |
| #include "HitTestRequest.h" |
| #include "HitTestResult.h" |
| #include "Node.h" |
| #include "PaintInfo.h" |
| #include "RenderBoxRegionInfo.h" |
| #include "RenderLayer.h" |
| #include "RenderRegion.h" |
| #include "RenderView.h" |
| #include "TransformState.h" |
| #include "WebKitNamedFlow.h" |
| |
| namespace WebCore { |
| |
| RenderFlowThread::RenderFlowThread(Node* node) |
| : RenderBlock(node) |
| , m_hasValidRegions(false) |
| , m_regionsInvalidated(false) |
| , m_regionsHaveUniformLogicalWidth(true) |
| , m_regionsHaveUniformLogicalHeight(true) |
| , m_overset(true) |
| , m_hasRegionsWithStyling(false) |
| , m_dispatchRegionLayoutUpdateEvent(false) |
| , m_pageLogicalHeightChanged(false) |
| { |
| ASSERT(node->document()->cssRegionsEnabled()); |
| setIsAnonymous(false); |
| setInRenderFlowThread(); |
| } |
| |
| PassRefPtr<RenderStyle> RenderFlowThread::createFlowThreadStyle(RenderStyle* parentStyle) |
| { |
| RefPtr<RenderStyle> newStyle(RenderStyle::create()); |
| newStyle->inheritFrom(parentStyle); |
| newStyle->setDisplay(BLOCK); |
| newStyle->setPosition(AbsolutePosition); |
| newStyle->setZIndex(0); |
| newStyle->setLeft(Length(0, Fixed)); |
| newStyle->setTop(Length(0, Fixed)); |
| newStyle->setWidth(Length(100, Percent)); |
| newStyle->setHeight(Length(100, Percent)); |
| newStyle->font().update(0); |
| |
| return newStyle.release(); |
| } |
| |
| void RenderFlowThread::styleDidChange(StyleDifference diff, const RenderStyle* oldStyle) |
| { |
| RenderBlock::styleDidChange(diff, oldStyle); |
| |
| if (oldStyle && oldStyle->writingMode() != style()->writingMode()) |
| m_regionsInvalidated = true; |
| } |
| |
| void RenderFlowThread::removeFlowChildInfo(RenderObject* child) |
| { |
| if (child->isBox()) |
| removeRenderBoxRegionInfo(toRenderBox(child)); |
| clearRenderObjectCustomStyle(child); |
| } |
| |
| void RenderFlowThread::addRegionToThread(RenderRegion* renderRegion) |
| { |
| ASSERT(renderRegion); |
| m_regionList.add(renderRegion); |
| renderRegion->setIsValid(true); |
| invalidateRegions(); |
| checkRegionsWithStyling(); |
| } |
| |
| void RenderFlowThread::removeRegionFromThread(RenderRegion* renderRegion) |
| { |
| ASSERT(renderRegion); |
| m_regionRangeMap.clear(); |
| m_regionList.remove(renderRegion); |
| invalidateRegions(); |
| checkRegionsWithStyling(); |
| } |
| |
| class CurrentRenderFlowThreadDisabler { |
| WTF_MAKE_NONCOPYABLE(CurrentRenderFlowThreadDisabler); |
| public: |
| CurrentRenderFlowThreadDisabler(RenderView* view) |
| : m_view(view) |
| , m_renderFlowThread(0) |
| { |
| m_renderFlowThread = m_view->flowThreadController()->currentRenderFlowThread(); |
| if (m_renderFlowThread) |
| view->flowThreadController()->setCurrentRenderFlowThread(0); |
| } |
| ~CurrentRenderFlowThreadDisabler() |
| { |
| if (m_renderFlowThread) |
| m_view->flowThreadController()->setCurrentRenderFlowThread(m_renderFlowThread); |
| } |
| private: |
| RenderView* m_view; |
| RenderFlowThread* m_renderFlowThread; |
| }; |
| |
| void RenderFlowThread::layout() |
| { |
| m_pageLogicalHeightChanged = m_regionsInvalidated && everHadLayout(); |
| if (m_regionsInvalidated) { |
| m_regionsInvalidated = false; |
| m_hasValidRegions = false; |
| m_regionsHaveUniformLogicalWidth = true; |
| m_regionsHaveUniformLogicalHeight = true; |
| m_regionRangeMap.clear(); |
| LayoutUnit previousRegionLogicalWidth = 0; |
| LayoutUnit previousRegionLogicalHeight = 0; |
| if (hasRegions()) { |
| for (RenderRegionList::iterator iter = m_regionList.begin(); iter != m_regionList.end(); ++iter) { |
| RenderRegion* region = *iter; |
| if (!region->isValid()) |
| continue; |
| ASSERT(!region->needsLayout()); |
| |
| region->deleteAllRenderBoxRegionInfo(); |
| |
| LayoutUnit regionLogicalWidth = region->pageLogicalWidth(); |
| LayoutUnit regionLogicalHeight = region->pageLogicalHeight(); |
| |
| if (!m_hasValidRegions) |
| m_hasValidRegions = true; |
| else { |
| if (m_regionsHaveUniformLogicalWidth && previousRegionLogicalWidth != regionLogicalWidth) |
| m_regionsHaveUniformLogicalWidth = false; |
| if (m_regionsHaveUniformLogicalHeight && previousRegionLogicalHeight != regionLogicalHeight) |
| m_regionsHaveUniformLogicalHeight = false; |
| } |
| |
| previousRegionLogicalWidth = regionLogicalWidth; |
| } |
| |
| updateLogicalWidth(); // Called to get the maximum logical width for the region. |
| |
| LayoutUnit logicalHeight = 0; |
| for (RenderRegionList::iterator iter = m_regionList.begin(); iter != m_regionList.end(); ++iter) { |
| RenderRegion* region = *iter; |
| if (!region->isValid()) |
| continue; |
| |
| LayoutUnit regionLogicalWidth = region->pageLogicalWidth(); |
| LayoutUnit regionLogicalHeight = region->logicalHeightOfAllFlowThreadContent(); |
| |
| LayoutRect regionRect(style()->direction() == LTR ? ZERO_LAYOUT_UNIT : logicalWidth() - regionLogicalWidth, logicalHeight, regionLogicalWidth, regionLogicalHeight); |
| region->setFlowThreadPortionRect(isHorizontalWritingMode() ? regionRect : regionRect.transposedRect()); |
| logicalHeight += regionLogicalHeight; |
| } |
| } |
| } |
| |
| CurrentRenderFlowThreadMaintainer currentFlowThreadSetter(this); |
| RenderBlock::layout(); |
| |
| m_pageLogicalHeightChanged = false; |
| |
| if (lastRegion()) |
| lastRegion()->expandToEncompassFlowThreadContentsIfNeeded(); |
| |
| if (shouldDispatchRegionLayoutUpdateEvent()) |
| dispatchRegionLayoutUpdateEvent(); |
| } |
| |
| void RenderFlowThread::updateLogicalWidth() |
| { |
| LayoutUnit logicalWidth = 0; |
| for (RenderRegionList::iterator iter = m_regionList.begin(); iter != m_regionList.end(); ++iter) { |
| RenderRegion* region = *iter; |
| if (!region->isValid()) |
| continue; |
| ASSERT(!region->needsLayout()); |
| logicalWidth = max(region->pageLogicalWidth(), logicalWidth); |
| } |
| setLogicalWidth(logicalWidth); |
| |
| // If the regions have non-uniform logical widths, then insert inset information for the RenderFlowThread. |
| for (RenderRegionList::iterator iter = m_regionList.begin(); iter != m_regionList.end(); ++iter) { |
| RenderRegion* region = *iter; |
| if (!region->isValid()) |
| continue; |
| |
| LayoutUnit regionLogicalWidth = region->pageLogicalWidth(); |
| if (regionLogicalWidth != logicalWidth) { |
| LayoutUnit logicalLeft = style()->direction() == LTR ? ZERO_LAYOUT_UNIT : logicalWidth - regionLogicalWidth; |
| region->setRenderBoxRegionInfo(this, logicalLeft, regionLogicalWidth, false); |
| } |
| } |
| } |
| |
| void RenderFlowThread::computeLogicalHeight(LayoutUnit, LayoutUnit logicalTop, LogicalExtentComputedValues& computedValues) const |
| { |
| computedValues.m_position = logicalTop; |
| computedValues.m_extent = 0; |
| |
| for (RenderRegionList::const_iterator iter = m_regionList.begin(); iter != m_regionList.end(); ++iter) { |
| RenderRegion* region = *iter; |
| if (!region->isValid()) |
| continue; |
| ASSERT(!region->needsLayout()); |
| computedValues.m_extent += region->logicalHeightOfAllFlowThreadContent(); |
| } |
| } |
| |
| void RenderFlowThread::paintFlowThreadPortionInRegion(PaintInfo& paintInfo, RenderRegion* region, LayoutRect flowThreadPortionRect, LayoutRect flowThreadPortionOverflowRect, const LayoutPoint& paintOffset) const |
| { |
| GraphicsContext* context = paintInfo.context; |
| if (!context) |
| return; |
| |
| // Adjust the clipping rect for the region. |
| // paintOffset contains the offset where the painting should occur |
| // adjusted with the region padding and border. |
| LayoutRect regionClippingRect(paintOffset + (flowThreadPortionOverflowRect.location() - flowThreadPortionRect.location()), flowThreadPortionOverflowRect.size()); |
| |
| PaintInfo info(paintInfo); |
| info.rect.intersect(pixelSnappedIntRect(regionClippingRect)); |
| |
| if (!info.rect.isEmpty()) { |
| context->save(); |
| |
| context->clip(regionClippingRect); |
| |
| // RenderFlowThread should start painting its content in a position that is offset |
| // from the region rect's current position. The amount of offset is equal to the location of |
| // the flow thread portion in the flow thread's local coordinates. |
| IntPoint renderFlowThreadOffset; |
| if (style()->isFlippedBlocksWritingMode()) { |
| LayoutRect flippedFlowThreadPortionRect(flowThreadPortionRect); |
| flipForWritingMode(flippedFlowThreadPortionRect); |
| renderFlowThreadOffset = roundedIntPoint(paintOffset - flippedFlowThreadPortionRect.location()); |
| } else |
| renderFlowThreadOffset = roundedIntPoint(paintOffset - flowThreadPortionRect.location()); |
| |
| context->translate(renderFlowThreadOffset.x(), renderFlowThreadOffset.y()); |
| info.rect.moveBy(-renderFlowThreadOffset); |
| |
| layer()->paint(context, info.rect, 0, 0, region, RenderLayer::PaintLayerTemporaryClipRects); |
| |
| context->restore(); |
| } |
| } |
| |
| bool RenderFlowThread::hitTestFlowThreadPortionInRegion(RenderRegion* region, LayoutRect flowThreadPortionRect, LayoutRect flowThreadPortionOverflowRect, const HitTestRequest& request, HitTestResult& result, const HitTestLocation& locationInContainer, const LayoutPoint& accumulatedOffset) const |
| { |
| LayoutRect regionClippingRect(accumulatedOffset + (flowThreadPortionOverflowRect.location() - flowThreadPortionRect.location()), flowThreadPortionOverflowRect.size()); |
| if (!regionClippingRect.contains(locationInContainer.point())) |
| return false; |
| |
| LayoutSize renderFlowThreadOffset; |
| if (style()->isFlippedBlocksWritingMode()) { |
| LayoutRect flippedFlowThreadPortionRect(flowThreadPortionRect); |
| flipForWritingMode(flippedFlowThreadPortionRect); |
| renderFlowThreadOffset = accumulatedOffset - flippedFlowThreadPortionRect.location(); |
| } else |
| renderFlowThreadOffset = accumulatedOffset - flowThreadPortionRect.location(); |
| |
| // Always ignore clipping, since the RenderFlowThread has nothing to do with the bounds of the FrameView. |
| HitTestRequest newRequest(request.type() | HitTestRequest::IgnoreClipping); |
| |
| // Make a new temporary HitTestLocation in the new region. |
| HitTestLocation newHitTestLocation(locationInContainer, -renderFlowThreadOffset, region); |
| |
| bool isPointInsideFlowThread = layer()->hitTest(newRequest, newHitTestLocation, result); |
| |
| // FIXME: Should we set result.m_localPoint back to the RenderRegion's coordinate space or leave it in the RenderFlowThread's coordinate |
| // space? Right now it's staying in the RenderFlowThread's coordinate space, which may end up being ok. We will know more when we get around to |
| // patching positionForPoint. |
| return isPointInsideFlowThread; |
| } |
| |
| bool RenderFlowThread::shouldRepaint(const LayoutRect& r) const |
| { |
| if (view()->printing() || r.isEmpty()) |
| return false; |
| |
| return true; |
| } |
| |
| void RenderFlowThread::repaintRectangleInRegions(const LayoutRect& repaintRect, bool immediate) |
| { |
| if (!shouldRepaint(repaintRect) || !hasValidRegionInfo()) |
| return; |
| |
| LayoutStateDisabler layoutStateDisabler(view()); // We can't use layout state to repaint, since the regions are somewhere else. |
| |
| // We can't use currentFlowThread as it is possible to have interleaved flow threads and the wrong one could be used. |
| // Let each region figure out the proper enclosing flow thread. |
| CurrentRenderFlowThreadDisabler disabler(view()); |
| |
| for (RenderRegionList::iterator iter = m_regionList.begin(); iter != m_regionList.end(); ++iter) { |
| RenderRegion* region = *iter; |
| if (!region->isValid()) |
| continue; |
| |
| region->repaintFlowThreadContent(repaintRect, immediate); |
| } |
| } |
| |
| RenderRegion* RenderFlowThread::regionAtBlockOffset(LayoutUnit offset, bool extendLastRegion) const |
| { |
| ASSERT(!m_regionsInvalidated); |
| |
| // If no region matches the position and extendLastRegion is true, it will return |
| // the last valid region. It is similar to auto extending the size of the last region. |
| RenderRegion* lastValidRegion = 0; |
| |
| // FIXME: The regions are always in order, optimize this search. |
| bool useHorizontalWritingMode = isHorizontalWritingMode(); |
| for (RenderRegionList::const_iterator iter = m_regionList.begin(); iter != m_regionList.end(); ++iter) { |
| RenderRegion* region = *iter; |
| if (!region->isValid()) |
| continue; |
| |
| if (offset <= 0) |
| return region; |
| |
| LayoutRect regionRect = region->flowThreadPortionRect(); |
| if ((useHorizontalWritingMode && offset < regionRect.maxY()) || (!useHorizontalWritingMode && offset < regionRect.maxX())) |
| return region; |
| |
| if (extendLastRegion || region->isRenderRegionSet()) |
| lastValidRegion = region; |
| } |
| |
| return lastValidRegion; |
| } |
| |
| LayoutUnit RenderFlowThread::pageLogicalTopForOffset(LayoutUnit offset) const |
| { |
| RenderRegion* region = regionAtBlockOffset(offset); |
| return region ? region->pageLogicalTopForOffset(offset) : ZERO_LAYOUT_UNIT; |
| } |
| |
| LayoutUnit RenderFlowThread::pageLogicalWidthForOffset(LayoutUnit offset) const |
| { |
| RenderRegion* region = regionAtBlockOffset(offset, true); |
| return region ? region->pageLogicalWidth() : contentLogicalWidth(); |
| } |
| |
| LayoutUnit RenderFlowThread::pageLogicalHeightForOffset(LayoutUnit offset) const |
| { |
| RenderRegion* region = regionAtBlockOffset(offset); |
| return region ? region->pageLogicalHeight() : ZERO_LAYOUT_UNIT; |
| } |
| |
| LayoutUnit RenderFlowThread::pageRemainingLogicalHeightForOffset(LayoutUnit offset, PageBoundaryRule pageBoundaryRule) const |
| { |
| RenderRegion* region = regionAtBlockOffset(offset); |
| if (!region) |
| return ZERO_LAYOUT_UNIT; |
| |
| LayoutUnit pageLogicalTop = region->pageLogicalTopForOffset(offset); |
| LayoutUnit pageLogicalHeight = region->pageLogicalHeight(); |
| LayoutUnit pageLogicalBottom = pageLogicalTop + pageLogicalHeight; |
| LayoutUnit remainingHeight = pageLogicalBottom - offset; |
| if (pageBoundaryRule == IncludePageBoundary) { |
| // If IncludePageBoundary is set, the line exactly on the top edge of a |
| // region will act as being part of the previous region. |
| remainingHeight = intMod(remainingHeight, pageLogicalHeight); |
| } |
| return remainingHeight; |
| } |
| |
| RenderRegion* RenderFlowThread::mapFromFlowToRegion(TransformState& transformState) const |
| { |
| if (!hasValidRegionInfo()) |
| return 0; |
| |
| LayoutRect boxRect = transformState.mappedQuad().enclosingBoundingBox(); |
| flipForWritingMode(boxRect); |
| |
| // FIXME: We need to refactor RenderObject::absoluteQuads to be able to split the quads across regions, |
| // for now we just take the center of the mapped enclosing box and map it to a region. |
| // Note: Using the center in order to avoid rounding errors. |
| |
| LayoutPoint center = boxRect.center(); |
| RenderRegion* renderRegion = regionAtBlockOffset(isHorizontalWritingMode() ? center.y() : center.x(), true); |
| if (!renderRegion) |
| return 0; |
| |
| LayoutRect flippedRegionRect(renderRegion->flowThreadPortionRect()); |
| flipForWritingMode(flippedRegionRect); |
| |
| transformState.move(renderRegion->contentBoxRect().location() - flippedRegionRect.location()); |
| |
| return renderRegion; |
| } |
| |
| void RenderFlowThread::removeRenderBoxRegionInfo(RenderBox* box) |
| { |
| if (!hasRegions()) |
| return; |
| |
| RenderRegion* startRegion; |
| RenderRegion* endRegion; |
| getRegionRangeForBox(box, startRegion, endRegion); |
| |
| for (RenderRegionList::iterator iter = m_regionList.find(startRegion); iter != m_regionList.end(); ++iter) { |
| RenderRegion* region = *iter; |
| if (!region->isValid()) |
| continue; |
| region->removeRenderBoxRegionInfo(box); |
| if (region == endRegion) |
| break; |
| } |
| |
| #ifndef NDEBUG |
| // We have to make sure we did not leave any RenderBoxRegionInfo attached. |
| for (RenderRegionList::iterator iter = m_regionList.begin(); iter != m_regionList.end(); ++iter) { |
| RenderRegion* region = *iter; |
| if (!region->isValid()) |
| continue; |
| ASSERT(!region->renderBoxRegionInfo(box)); |
| } |
| #endif |
| |
| m_regionRangeMap.remove(box); |
| } |
| |
| bool RenderFlowThread::logicalWidthChangedInRegions(const RenderBlock* block, LayoutUnit offsetFromLogicalTopOfFirstPage) |
| { |
| if (!hasRegions() || block == this) // Not necessary, since if any region changes, we do a full pagination relayout anyway. |
| return false; |
| |
| RenderRegion* startRegion; |
| RenderRegion* endRegion; |
| getRegionRangeForBox(block, startRegion, endRegion); |
| |
| for (RenderRegionList::iterator iter = m_regionList.find(startRegion); iter != m_regionList.end(); ++iter) { |
| RenderRegion* region = *iter; |
| |
| if (!region->isValid()) |
| continue; |
| |
| ASSERT(!region->needsLayout()); |
| |
| OwnPtr<RenderBoxRegionInfo> oldInfo = region->takeRenderBoxRegionInfo(block); |
| if (!oldInfo) |
| continue; |
| |
| LayoutUnit oldLogicalWidth = oldInfo->logicalWidth(); |
| RenderBoxRegionInfo* newInfo = block->renderBoxRegionInfo(region, offsetFromLogicalTopOfFirstPage); |
| if (!newInfo || newInfo->logicalWidth() != oldLogicalWidth) |
| return true; |
| |
| if (region == endRegion) |
| break; |
| } |
| |
| return false; |
| } |
| |
| LayoutUnit RenderFlowThread::contentLogicalWidthOfFirstRegion() const |
| { |
| RenderRegion* firstValidRegionInFlow = firstRegion(); |
| if (!firstValidRegionInFlow) |
| return ZERO_LAYOUT_UNIT; |
| return isHorizontalWritingMode() ? firstValidRegionInFlow->contentWidth() : firstValidRegionInFlow->contentHeight(); |
| } |
| |
| LayoutUnit RenderFlowThread::contentLogicalHeightOfFirstRegion() const |
| { |
| RenderRegion* firstValidRegionInFlow = firstRegion(); |
| if (!firstValidRegionInFlow) |
| return ZERO_LAYOUT_UNIT; |
| return isHorizontalWritingMode() ? firstValidRegionInFlow->contentHeight() : firstValidRegionInFlow->contentWidth(); |
| } |
| |
| LayoutUnit RenderFlowThread::contentLogicalLeftOfFirstRegion() const |
| { |
| RenderRegion* firstValidRegionInFlow = firstRegion(); |
| if (!firstValidRegionInFlow) |
| return ZERO_LAYOUT_UNIT; |
| return isHorizontalWritingMode() ? firstValidRegionInFlow->flowThreadPortionRect().x() : firstValidRegionInFlow->flowThreadPortionRect().y(); |
| } |
| |
| RenderRegion* RenderFlowThread::firstRegion() const |
| { |
| if (!hasValidRegionInfo()) |
| return 0; |
| for (RenderRegionList::const_iterator iter = m_regionList.begin(); iter != m_regionList.end(); ++iter) { |
| RenderRegion* region = *iter; |
| if (!region->isValid()) |
| continue; |
| return region; |
| } |
| ASSERT_NOT_REACHED(); |
| return 0; |
| } |
| |
| RenderRegion* RenderFlowThread::lastRegion() const |
| { |
| if (!hasValidRegionInfo()) |
| return 0; |
| for (RenderRegionList::const_reverse_iterator iter = m_regionList.rbegin(); iter != m_regionList.rend(); ++iter) { |
| RenderRegion* region = *iter; |
| if (!region->isValid()) |
| continue; |
| return region; |
| } |
| ASSERT_NOT_REACHED(); |
| return 0; |
| } |
| |
| void RenderFlowThread::clearRenderObjectCustomStyle(const RenderObject* object, |
| const RenderRegion* oldStartRegion, const RenderRegion* oldEndRegion, |
| const RenderRegion* newStartRegion, const RenderRegion* newEndRegion) |
| { |
| // Clear the styles for the object in the regions. |
| // The styles are not cleared for the regions that are contained in both ranges. |
| bool insideOldRegionRange = false; |
| bool insideNewRegionRange = false; |
| for (RenderRegionList::iterator iter = m_regionList.begin(); iter != m_regionList.end(); ++iter) { |
| RenderRegion* region = *iter; |
| |
| if (oldStartRegion == region) |
| insideOldRegionRange = true; |
| if (newStartRegion == region) |
| insideNewRegionRange = true; |
| |
| if (!(insideOldRegionRange && insideNewRegionRange)) |
| region->clearObjectStyleInRegion(object); |
| |
| if (oldEndRegion == region) |
| insideOldRegionRange = false; |
| if (newEndRegion == region) |
| insideNewRegionRange = false; |
| } |
| } |
| |
| void RenderFlowThread::setRegionRangeForBox(const RenderBox* box, LayoutUnit offsetFromLogicalTopOfFirstPage) |
| { |
| if (!hasRegions()) |
| return; |
| |
| // FIXME: Not right for differing writing-modes. |
| RenderRegion* startRegion = regionAtBlockOffset(offsetFromLogicalTopOfFirstPage, true); |
| RenderRegion* endRegion = regionAtBlockOffset(offsetFromLogicalTopOfFirstPage + box->logicalHeight(), true); |
| RenderRegionRangeMap::iterator it = m_regionRangeMap.find(box); |
| if (it == m_regionRangeMap.end()) { |
| m_regionRangeMap.set(box, RenderRegionRange(startRegion, endRegion)); |
| clearRenderObjectCustomStyle(box); |
| return; |
| } |
| |
| // If nothing changed, just bail. |
| RenderRegionRange& range = it->value; |
| if (range.startRegion() == startRegion && range.endRegion() == endRegion) |
| return; |
| |
| // Delete any info that we find before our new startRegion and after our new endRegion. |
| for (RenderRegionList::iterator iter = m_regionList.begin(); iter != m_regionList.end(); ++iter) { |
| RenderRegion* region = *iter; |
| if (region == startRegion) { |
| iter = m_regionList.find(endRegion); |
| continue; |
| } |
| |
| region->removeRenderBoxRegionInfo(box); |
| |
| if (region == range.endRegion()) |
| break; |
| } |
| |
| clearRenderObjectCustomStyle(box, range.startRegion(), range.endRegion(), startRegion, endRegion); |
| range.setRange(startRegion, endRegion); |
| } |
| |
| void RenderFlowThread::getRegionRangeForBox(const RenderBox* box, RenderRegion*& startRegion, RenderRegion*& endRegion) const |
| { |
| startRegion = 0; |
| endRegion = 0; |
| RenderRegionRangeMap::const_iterator it = m_regionRangeMap.find(box); |
| if (it == m_regionRangeMap.end()) |
| return; |
| |
| const RenderRegionRange& range = it->value; |
| startRegion = range.startRegion(); |
| endRegion = range.endRegion(); |
| ASSERT(m_regionList.contains(startRegion) && m_regionList.contains(endRegion)); |
| } |
| |
| void RenderFlowThread::computeOverflowStateForRegions(LayoutUnit oldClientAfterEdge) |
| { |
| LayoutUnit height = oldClientAfterEdge; |
| // FIXME: the visual overflow of middle region (if it is the last one to contain any content in a render flow thread) |
| // might not be taken into account because the render flow thread height is greater that that regions height + its visual overflow |
| // because of how computeLogicalHeight is implemented for RenderFlowThread (as a sum of all regions height). |
| // This means that the middle region will be marked as fit (even if it has visual overflow flowing into the next region) |
| if (hasRenderOverflow() |
| && ( (isHorizontalWritingMode() && visualOverflowRect().maxY() > clientBoxRect().maxY()) |
| || (!isHorizontalWritingMode() && visualOverflowRect().maxX() > clientBoxRect().maxX()))) |
| height = isHorizontalWritingMode() ? visualOverflowRect().maxY() : visualOverflowRect().maxX(); |
| |
| RenderRegion* lastReg = lastRegion(); |
| for (RenderRegionList::iterator iter = m_regionList.begin(); iter != m_regionList.end(); ++iter) { |
| RenderRegion* region = *iter; |
| if (!region->isValid()) { |
| region->setRegionState(RenderRegion::RegionUndefined); |
| continue; |
| } |
| LayoutUnit flowMin = height - (isHorizontalWritingMode() ? region->flowThreadPortionRect().y() : region->flowThreadPortionRect().x()); |
| LayoutUnit flowMax = height - (isHorizontalWritingMode() ? region->flowThreadPortionRect().maxY() : region->flowThreadPortionRect().maxX()); |
| RenderRegion::RegionState previousState = region->regionState(); |
| RenderRegion::RegionState state = RenderRegion::RegionFit; |
| if (flowMin <= 0) |
| state = RenderRegion::RegionEmpty; |
| if (flowMax > 0 && region == lastReg) |
| state = RenderRegion::RegionOverset; |
| region->setRegionState(state); |
| // determine whether the NamedFlow object should dispatch a regionLayoutUpdate event |
| // FIXME: currently it cannot determine whether a region whose regionOverset state remained either "fit" or "overset" has actually |
| // changed, so it just assumes that the NamedFlow should dispatch the event |
| if (previousState != state |
| || state == RenderRegion::RegionFit |
| || state == RenderRegion::RegionOverset) |
| setDispatchRegionLayoutUpdateEvent(true); |
| } |
| |
| // With the regions overflow state computed we can also set the overset flag for the named flow. |
| // If there are no valid regions in the chain, overset is true. |
| m_overset = lastReg ? lastReg->regionState() == RenderRegion::RegionOverset : true; |
| } |
| |
| bool RenderFlowThread::regionInRange(const RenderRegion* targetRegion, const RenderRegion* startRegion, const RenderRegion* endRegion) const |
| { |
| ASSERT(targetRegion); |
| |
| for (RenderRegionList::const_iterator it = m_regionList.find(const_cast<RenderRegion*>(startRegion)); it != m_regionList.end(); ++it) { |
| const RenderRegion* currRegion = *it; |
| if (!currRegion->isValid()) |
| continue; |
| if (targetRegion == currRegion) |
| return true; |
| if (currRegion == endRegion) |
| break; |
| } |
| |
| return false; |
| } |
| |
| // Check if the content is flown into at least a region with region styling rules. |
| void RenderFlowThread::checkRegionsWithStyling() |
| { |
| bool hasRegionsWithStyling = false; |
| for (RenderRegionList::iterator iter = m_regionList.begin(); iter != m_regionList.end(); ++iter) { |
| RenderRegion* region = *iter; |
| if (!region->isValid()) |
| continue; |
| if (region->hasCustomRegionStyle()) { |
| hasRegionsWithStyling = true; |
| break; |
| } |
| } |
| m_hasRegionsWithStyling = hasRegionsWithStyling; |
| } |
| |
| bool RenderFlowThread::objectInFlowRegion(const RenderObject* object, const RenderRegion* region) const |
| { |
| ASSERT(object); |
| ASSERT(region); |
| |
| if (!object->inRenderFlowThread()) |
| return false; |
| if (object->enclosingRenderFlowThread() != this) |
| return false; |
| if (!m_regionList.contains(const_cast<RenderRegion*>(region))) |
| return false; |
| |
| RenderBox* enclosingBox = object->enclosingBox(); |
| RenderRegion* enclosingBoxStartRegion = 0; |
| RenderRegion* enclosingBoxEndRegion = 0; |
| getRegionRangeForBox(enclosingBox, enclosingBoxStartRegion, enclosingBoxEndRegion); |
| if (!regionInRange(region, enclosingBoxStartRegion, enclosingBoxEndRegion)) |
| return false; |
| |
| if (object->isBox()) |
| return true; |
| |
| LayoutRect objectABBRect = object->absoluteBoundingBoxRect(true); |
| if (!objectABBRect.width()) |
| objectABBRect.setWidth(1); |
| if (!objectABBRect.height()) |
| objectABBRect.setHeight(1); |
| if (objectABBRect.intersects(region->absoluteBoundingBoxRect(true))) |
| return true; |
| |
| if (region == lastRegion()) { |
| // If the object does not intersect any of the enclosing box regions |
| // then the object is in last region. |
| for (RenderRegionList::const_iterator it = m_regionList.find(enclosingBoxStartRegion); it != m_regionList.end(); ++it) { |
| const RenderRegion* currRegion = *it; |
| if (!region->isValid()) |
| continue; |
| if (currRegion == region) |
| break; |
| if (objectABBRect.intersects(currRegion->absoluteBoundingBoxRect(true))) |
| return false; |
| } |
| return true; |
| } |
| |
| return false; |
| } |
| |
| #ifndef NDEBUG |
| unsigned RenderFlowThread::autoLogicalHeightRegionsCount() const |
| { |
| unsigned autoLogicalHeightRegions = 0; |
| for (RenderRegionList::const_iterator iter = m_regionList.begin(); iter != m_regionList.end(); ++iter) { |
| const RenderRegion* region = *iter; |
| if (!region->isValid()) { |
| ASSERT(!region->hasAutoLogicalHeight()); |
| continue; |
| } |
| |
| if (region->hasAutoLogicalHeight()) |
| autoLogicalHeightRegions++; |
| } |
| |
| return autoLogicalHeightRegions; |
| } |
| #endif |
| |
| CurrentRenderFlowThreadMaintainer::CurrentRenderFlowThreadMaintainer(RenderFlowThread* renderFlowThread) |
| : m_renderFlowThread(renderFlowThread) |
| { |
| if (!m_renderFlowThread) |
| return; |
| RenderView* view = m_renderFlowThread->view(); |
| ASSERT(!view->flowThreadController()->currentRenderFlowThread()); |
| view->flowThreadController()->setCurrentRenderFlowThread(m_renderFlowThread); |
| } |
| |
| CurrentRenderFlowThreadMaintainer::~CurrentRenderFlowThreadMaintainer() |
| { |
| if (!m_renderFlowThread) |
| return; |
| RenderView* view = m_renderFlowThread->view(); |
| ASSERT(view->flowThreadController()->currentRenderFlowThread() == m_renderFlowThread); |
| view->flowThreadController()->setCurrentRenderFlowThread(0); |
| } |
| |
| |
| } // namespace WebCore |
