Debugging Tips

There are many ways to debug ANGLE using generic or platform-dependent tools. Here is a list of tips on how to use them.

Running ANGLE under apitrace on Linux

Apitrace captures traces of OpenGL commands for later analysis, allowing us to see how ANGLE translates OpenGL ES commands. In order to capture the trace, it inserts a driver shim using LD_PRELOAD that records the command and then forwards it to the OpenGL driver.

The problem with ANGLE is that it exposes the same symbols as the OpenGL driver so apitrace captures the entry point calls intended for ANGLE and reroutes them to the OpenGL driver. In order to avoid this problem, use the following:

  1. Link your application against the static ANGLE libraries (libGLESv2_static and libEGL_static) so they don‘t get shadowed by apitrace’s shim.
  2. Ask apitrace to explicitly load the driver instead of using a dlsym on the current module. Otherwise apitrace will use ANGLE's symbols as the OpenGL driver entrypoint (causing infinite recursion). To do this you must point an environment variable to your GL driver. For example: export TRACE_LIBGL=/usr/lib/libGL.so.1. You can find your libGL with ldconfig -p | grep libGL.
  3. Link ANGLE against libGL instead of dlsyming the symbols at runtime; otherwise ANGLE won't use the replaced driver entry points. This is done with the gn arg angle_link_glx = true.

If you follow these steps, apitrace will work correctly aside from a few minor bugs like not being able to figure out what the default framebuffer size is if there is no glViewport command.

For example, to trace a run of hello_triangle, assuming the apitrace executables are in $PATH:

gn args out/Debug # add "angle_link_glx = true"
# edit samples/BUILD.gn and append "_static" to "angle_util", "libEGL", "libGLESv2"
ninja -C out/Debug
export TRACE_LIBGL="/usr/lib/libGL.so.1" # may require a different path
apitrace trace -o mytrace ./out/Debug/hello_triangle
qapitrace mytrace

Enabling General Logging

Normally, ANGLE only logs errors and warnings (e.g. to Android logcat). General logging, or additional levels of “trace” messages will be logged when the following GN arg is set:

angle_enable_trace = true

To log all GLES and EGL commands submitted by an application, including the following flag:

angle_enable_trace_events = true

Debug Angle on Android

Android is built as an Android APK, which makes it more difficult to debug an APK that is using ANGLE. The following information can allow you to debug ANGLE with LLDB.

  • You need to build ANGLE with debug symbols enabled. Assume your build variant is called Debug. Make sure you have these lines in out/Debug/args.gn
is_component_build = false
is_debug = true
is_official_build = false
symbol_level = 2
strip_debug_info = false
ignore_elf32_limitations = true
angle_extract_native_libs = true

The following local patch may also be necessary:

diff --git a/build/config/compiler/compiler.gni b/build/config/compiler/compiler.gni
index 96a18d91a3f6..ca7971fdfd48 100644
--- a/build/config/compiler/compiler.gni
+++ b/build/config/compiler/compiler.gni
@@ -86,7 +86,8 @@ declare_args() {
   # Whether an error should be raised on attempts to make debug builds with
   # is_component_build=false. Very large debug symbols can have unwanted side
   # effects so this is enforced by default for chromium.
-  forbid_non_component_debug_builds = build_with_chromium
+  forbid_non_component_debug_builds = false 

Build/install/enable ANGLE apk for your application following other instructions.

  • Modify gdbclient.py script to let it find the ANGLE symbols.
diff --git a/scripts/gdbclient.py b/scripts/gdbclient.py
index 61fac4000..1f43f4f64 100755
--- a/scripts/gdbclient.py
+++ b/scripts/gdbclient.py
@@ -395,6 +395,8 @@ def generate_setup_script(debugger_path, sysroot, linker_search_dir, binary_file
     vendor_paths = ["", "hw", "egl"]
     solib_search_path += [os.path.join(symbols_dir, x) for x in symbols_paths]
     solib_search_path += [os.path.join(vendor_dir, x) for x in vendor_paths]
+    solib_search_path += ["/your_path_to_chromium_src/out/Debug/lib.unstripped/"]
     if linker_search_dir is not None:
         solib_search_path += [linker_search_dir]
  • Start your lldbclient.py from /your_path_to_chromium_src/out/Debug folder. This adds the ANGLE source-file paths to what is visible to LLDB, which allows LLDB to show ANGLE's source files. Refer to https://source.android.com/devices/tech/debug/gdb for how to attach the app for debugging.
  • If you are debugging angle_perftests, you can use --shard-timeout 100000000 to disable the timeout so that the test won‘t get killed while you are debugging. If the test runs too fast that you don’t have time to attach, use --delay-test-start=60 to give you extra time to attach.

Enabling Debug-Utils Markers

ANGLE can emit debug-utils markers for every GLES API command that are visible to both Android GPU Inspector (AGI) and RenderDoc. This support requires enabling general logging as well as setting the following additional GN arg:

angle_enable_annotator_run_time_checks = true

In addition, if the following GN arg is set, the API calls will output to Android's logcat:

angle_enable_trace_android_logcat = true

Once compiled, the markers need to be turned on.

Turning on Debug Markers on Android

On Android, debug markers are turned on and off with an Android debug property that is automatically deleted at the next reboot:

adb shell setprop debug.angle.markers 1
  • 0: Turned off/disabled (default)
  • 1: Turned on/enabled

Turning on Debug Markers on Desktop

On desktop, debug markers are turned on and off with the ANGLE_ENABLE_DEBUG_MARKERS environment variable (set in OS-specific manner):

  • 0: Turned off/disabled (default)
  • 1: Turned on/enabled

Running ANGLE under GAPID on Linux

GAPID can be used to capture trace of Vulkan commands on Linux. When capturing traces of gtest based tests built inside Chromium checkout, make sure to run the tests with --single-process-tests argument.

Running ANGLE under GAPID on Android

GAPID can be used to capture a trace of the Vulkan or OpenGL ES command stream on Android. For it to work, ANGLE's libraries must have different names from the system OpenGL libraries. This is done with the gn arg:

angle_libs_suffix = "_ANGLE_DEV"

All AngleNativeTest based tests share the same activity name, com.android.angle.test.AngleUnitTestActivity. Thus, prior to capturing your test trace, the specific test APK must be installed on the device. When you build the test, a test launcher is generated, for example, ./out/Release/bin/run_angle_end2end_tests. The best way to install the APK is to run this test launcher once.

In GAPID's “Capture Trace” dialog, “Package / Action:” should be:

android.intent.action.MAIN:com.android.angle.test/com.android.angle.test.AngleUnitTestActivity

The mandatory extra intent argument for starting the activity is org.chromium.native_test.NativeTest.StdoutFile. Without it the test APK crashes. Test filters can be specified via either the org.chromium.native_test.NativeTest.CommandLineFlags or the org.chromium.native_test.NativeTest.GtestFilter argument. Example “Intent Arguments:” values in GAPID's “Capture Trace” dialog:

-e org.chromium.native_test.NativeTest.StdoutFile /sdcard/chromium_tests_root/out.txt -e org.chromium.native_test.NativeTest.CommandLineFlags "--gtest_filter=*ES2_VULKAN"

or

-e org.chromium.native_test.NativeTest.StdoutFile /sdcard/chromium_tests_root/out.txt --e org.chromium.native_test.NativeTest.GtestFilter RendererTest.SimpleOperation/ES2_VULKAN:SimpleOperationTest.DrawWithTexture/ES2_VULKAN

Running ANGLE under RenderDoc

An application running through ANGLE can confuse RenderDoc, as RenderDoc hooks to EGL and ends up tracing the calls the application makes, instead of the calls ANGLE makes to its backend. As ANGLE is a special case, there's little support for it by RenderDoc, though there are workarounds.

Windows

On Windows, RenderDoc supports setting the environment variable RENDERDOC_HOOK_EGL to 0 to avoid this issue.

Linux

On Linux, there is no supported workaround by RenderDoc. See this issue. To capture Vulkan traces, the workaround is to build RenderDoc without GL(ES) support.

Building RenderDoc is straightforward. However, here are a few instructions to keep in mind.

# Install dependencies based on RenderDoc document.  Here are some packages that are unlikely to be already installed:
$ sudo apt install libxcb-keysyms1-dev python3-dev qt5-qmake libqt5svg5-dev libqt5x11extras5-dev

# Inside the RenderDoc directory:
$ cmake -DCMAKE_BUILD_TYPE=Release -Bbuild -H. -DENABLE_GLES=OFF -DENABLE_GL=OFF

# QT_SELECT=5 is necessary if your distribution doesn't default to Qt5
$ QT_SELECT=5 make -j -C build

# Run RenderDoc from the build directory:
$ ./build/bin/qrenderdoc

If your distribution does not provide a recent Vulkan SDK package, you would need to manually install that. This script tries to perform this installation as safely as possible. It would overwrite the system package's files, so follow at your own risk. Place this script just above the extracted SDK directory.

#! /bin/bash

if [ $# -lt 1 ]; then
  echo "Usage: $0 <version>"
  exit 1
fi

ver=$1

if [ ! -d "$ver" ]; then
  echo "$ver is not a directory"
fi

# Verify everything first
echo "Verifying files..."
echo "$ver"/x86_64/bin/vulkaninfo
test -f "$ver"/x86_64/bin/vulkaninfo || exit 1
echo "$ver"/x86_64/etc/explicit_layer.d/
test -d "$ver"/x86_64/etc/explicit_layer.d || exit 1
echo "$ver"/x86_64/lib/
test -d "$ver"/x86_64/lib || exit 1

echo "Verified. Performing copy..."

echo sudo cp "$ver"/x86_64/bin/vulkaninfo /usr/bin/vulkaninfo
sudo cp "$ver"/x86_64/bin/vulkaninfo /usr/bin/vulkaninfo
echo sudo cp "$ver"/x86_64/etc/explicit_layer.d/* /etc/explicit_layer.d/
sudo cp "$ver"/x86_64/etc/explicit_layer.d/* /etc/explicit_layer.d/
echo sudo rm /usr/lib/x86_64-linux-gnu/libvulkan.so*
sudo rm /usr/lib/x86_64-linux-gnu/libvulkan.so*
echo sudo cp -P "$ver"/x86_64/lib/lib* /usr/lib/x86_64-linux-gnu/
sudo cp -P "$ver"/x86_64/lib/lib* /usr/lib/x86_64-linux-gnu/

echo "Done."

Android

Linux

If you are on Linux, make sure not to use the build done in the previous section. The GL renderer disabled in the previous section is actually needed in this section.

Define the following environment variables, for example in .bashrc (values are examples):

export JAVA_HOME=/usr/local/buildtools/java/jdk
export ANDROID_SDK=$HOME/chromium/src/third_party/android_sdk/public
export ANDROID_NDK=$HOME/chromium/src/third_party/android_ndk
export ANDROID_NDK_HOME=$HOME/chromium/src/third_party/android_ndk

In the renderdoc directory, create Android builds of RenderDoc:

mkdir build-android-arm32
cd build-android-arm32/
cmake -DBUILD_ANDROID=On -DANDROID_ABI=armeabi-v7a ..
make -j
cd ../

mkdir build-android-arm64
cd build-android-arm64/
cmake -DBUILD_ANDROID=On -DANDROID_ABI=arm64-v8a ..
make -j
cd ../

Note that you need both arm32 and arm64 builds even if working with an arm64 device. See RenderDoc's documentation for more information.

When you run RenderDoc, choose the “Replay Context” from the bottom-left part of the UI (defaults to Local). When selecting the device, you should see the RenderDoc application running.

In ANGLE itself, make sure you add a suffix for its names to be different from the system's. Add this to gn args:

angle_libs_suffix = "_ANGLE_DEV"

Next, you need to install an ANGLE test APK. When you build the test, a test launcher is generated, for example, ./out/Release/bin/run_angle_end2end_tests. The best way to install the APK is to run this test launcher once.

In RenderDoc, use com.android.angle.test/com.android.angle.test.AngleUnitTestActivity as the Executable Path, and provide the following arguments:

-e org.chromium.native_test.NativeTest.StdoutFile /sdcard/chromium_tests_root/out.txt -e org.chromium.native_test.NativeTest.CommandLineFlags "--gtest_filter=*ES2_VULKAN"

Note that in the above, only a single command line argument is supported with RenderDoc. If testing dEQP on a non-default platform, the easiest way would be to modify GetDefaultAPIName() in src/tests/deqp_support/angle_deqp_gtest.cpp (and avoid --use-angle=X).

Windows

You should be able to download the latest RenderDoc on Windows and follow the RenderDoc Official Documentation for instructions on how to use RenderDoc on Android. If you would like to build RenderDoc for Android on Windows yourself, you can follow the RenderDoc Officual Documentation. We listed more detailed instructions below on how to set up the build on Windows.

Install Android Dependencies

On windows, we need to install dependencies to build android, as described in RenderDoc Official Documentation

  1. Install Android SDK.

    Add a new system variable:

    Variable: ANDROID_SDK

    Value: path_to_sdk_directory (e.g. C:\Users\test\Appdata\Local\Android\Sdk)

  2. Install Android NDK.

    Add a new system variable:

    Variable: ANDROID_NDK

    Value: path_to_ndk_directory (e.g. C:\Users\test\Appdata\Local\Android\Sdk\ndk\23.1.7779620)

  3. Install Java 8.

    Add a new system variable:

    Variable: JAVA_HOME

    Value: path_to_jdk1.8_directory (e.g. C:\Program Files\Java\jdk1.8.0_311)

  4. Install Android Debug Bridge.

    Append android_sdk_platform-tools_directory to the Path system variable.

    e.g. C:\Users\Test\AppData\Local\Android\Sdk\platform-tools

Install Build Tools
  1. Install a bash shell. Git Bash comes with Git installation on Windows should work.
  2. Install make. Add the path to bin folder of GnuWin32 to the Path system variable.
Build RenderDoc Android APK on Windows

If you are using the Git Bash that comes with MinGW generator, you can run below commands to build Android APK

mkdir build-android-arm32
cd build-android-arm32/
cmake -DBUILD_ANDROID=On -DANDROID_ABI=armeabi-v7a -G "MinGW Makefiles" ..
make -j
cd ../

mkdir build-android-arm64
cd build-android-arm64/
cmake -DBUILD_ANDROID=On -DANDROID_ABI=arm64-v8a -G "MinGW Makefiles" ..
make -j
cd ../

If the generator type of the bash shell you are using is different from MinGW, replace the “MinGW” in the above cmake command with the generator type you are using, as described in RenderDoc Official Documentation.

Build Errors And Resolutions
  • cmake command errors
Error: Failed to run MSBuild command:
C:/Program Files (x86)/Microsoft Visual Studio/2019/Professional/MSBuild/Current/Bin/MSBuild.exe to get the value of
VCTargetsPath:
error : The BaseOutputPath/OutputPath property is not set for project 'VCTargetsPath.vcxproj'.
Please check to make sure that you have specified a valid combination of Configuration and Platform for this project.
Configuration='Debug'  Platform='x64'.

This is due to the cmake command is using Visual Studio as the generator type. Run the cmake command with the generator type “MinGW Makefiles” or “MSYS Makefiles”.

Error: Does not match the generator used previously

Delete the CMakeCache file in build directories build-android-arm64/ or build-android-arm32/.

  • make command errors
-Djava.ext.dirs is not supported.
Error: Could not create the Java Virtual Machine.
Error: A fatal exception has occurred. Program will exit.

Downgrade Java JDK version to Java 8.

Steps to use the RenderDoc you just built
  1. Build arm32 and arm64 android packages. See instructions in the above section.

  2. Uninstall the renderdoc package.

This step is required if you have installed / used RenderDoc on the same Android device before. RenderDoc only pushes the renderdoccmd APK to the Android device if it finds the version of the existing APK on the device is different from the version of the APK we are going to install, and the version is dictated by the git hash it was built from. Therefore any local modifications in the RenderDoc codebase would not get picked up if we don't uninstall the old APK first.

adb uninstall org.renderdoc.renderdoccmd.arm64
adb uninstall org.renderdoc.renderdoccmd.arm32
  1. Build renderdoc on windows desktop by clicking “build solution” in visual studio.
  2. Launch renderdoc from visual studio, and push the android packages to android device by selecting the connected device at the bottom left corner.

Testing with Chrome Canary

Many of ANGLE's OpenGL ES entry points are exposed in Chromium as WebGL 1.0 and WebGL 2.0 APIs that are available via JavaScript. For testing purposes, custom ANGLE builds may be injected in Chrome Canary.

Setup

Windows

  1. Download and install Google Chrome Canary.
  2. Build ANGLE x64, Release.
  3. Run python scripts\update_chrome_angle.py to replace Canary's ANGLE with your custom ANGLE (note: Canary must be closed).

Linux

  1. Install Google Chrome Dev (via apt, or otherwise). Expected installation directory is /opt/google/chrome-unstable.
  2. Build ANGLE for the running platform. is_component_build = false is suggested in the GN args.
  3. Run python scripts/update_chrome_angle.py to replace Dev's ANGLE with your custom ANGLE
  4. Add ANGLE's build path to the LD_LIBRARY_PATH environment variable.

macOS

  1. Download and install Google Chrome Canary.
  2. Build ANGLE for the running platform; GN args should contain is_debug = false.
  3. Run ./scripts/update_chrome_angle.py to replace Canary's ANGLE with your custom ANGLE.

Usage

Run Chrome:

  • On Windows: %LOCALAPPDATA%\Google\Chrome SxS\chrome.exe
  • On Linux: /opt/google/chrome-unstable/google-chrome-unstable
  • On macOS: ./Google\ Chrome\ Canary.app/Contents/MacOS/Google\ Chrome\ Canary

With the following command-line options:

  • --use-cmd-decoder=passthrough --use-gl=angle and one of
    • --use-angle=d3d9 (Direct3D 9 renderer, Windows only)
    • --use-angle=d3d11 (Direct3D 11 renderer, Windows only)
    • --use-angle=d3d11on12 (Direct3D 11on12 renderer, Windows only)
    • --use-angle=gl (OpenGL renderer)
    • --use-angle=gles (OpenGL ES renderer)
    • --use-angle=vulkan (Vulkan renderer)
    • --use-angle=swiftshader (SwiftShader renderer)
    • --use-angle=metal (Metal renderer, macOS only)

Additional useful options:

  • --enable-logging: To see logs
  • --disable-gpu-watchdog: To disable Chromium's watchdog, killing the GPU process when slow (due to a debug build for example)
  • --disable-gpu-sandbox: To disable Chromium‘s sandboxing features, if it’s getting in the way of testing.
  • --disable-gpu-compositing: To make sure only the WebGL test being debugged is run through ANGLE, not the entirety of Chromium.