Enable WasmLLInt on ARMv7

Patch by Geza Lore <glore@igalia.com> on 2022-05-27
https://bugs.webkit.org/show_bug.cgi?id=221260

Reviewed by Saam Barati.

Patch by Geza Lore and Xan López.

Implement the LLInt tier of WebAssembly for ARMv7. A lot of the
work will be shared by any 32bit port, but the offlineassembler
has only been updated for ARMv7 so far.

Main highlights:

We have split the WebAssembly.asm file into three chunks,
following what LowLevelInterpreter.asm does. The common code
remains in WebAssembly.asm, and 32 and 64bit specific code (mostly
opcode implementations) goes into WebAssembly32_64.asm and
WebAssembly64.asm.

We have decided to use consecutive even/odd pairs of GPRs for every
type of wasm values, even if they are 32bit (i32/f32), with the odd
(higher) numbered GPR holding the more significant half. 32bit values
are held in the even (lower) numbered register. This makes the code
much simpler and allows us to share more code with the 64bit variant.
This is mostly relevant for argument passing, and given that every
value ends up in the stack anyway we do not think it is significant
from a performance POV.

We are reusing JSValueRegs to hold Wasm values too. Obviously they
are not really JSValues, so it might make sense to create a base
class that can be used for both JS and Wasm values.

We do not have enough registers to keep things like the memory
base pointer and size in pinned registers, so we are forced to
load them on each use.

We disable the 'Signaling' memory mode, since the current
implementation relies on being able to mprotect a 2^32 + redzone
region of memory. This can be changed in the future but it's not a
priority at the moment.

* stress/sampling-profiler-wasm-name-section.js:
* stress/sampling-profiler-wasm.js:
* wasm/regress/llint-callee-saves-with-fast-memory.js:
* CMakeLists.txt:
* assembler/ARMv7Assembler.h:
(JSC::ARMv7Assembler::vcvt_signedToFloatingPoint):
* assembler/MacroAssemblerARMv7.h:
(JSC::MacroAssemblerARMv7::convertInt32ToFloat):
(JSC::MacroAssemblerARMv7::threadSafePatchableNearCall):
(JSC::MacroAssemblerARMv7::callOperation):
* b3/B3ValueRep.h:
(JSC::B3::ValueRep::ValueRep):
* bytecode/BytecodeDumper.cpp:
(JSC::Wasm::BytecodeDumper::formatConstant const):
* interpreter/CallFrame.h: adapt to new callee tagging format.
(JSC::CallFrame::callee const):
(JSC::CallFrame::unsafeCallee const):
* interpreter/CalleeBits.h: add wasm tagging of callee values for
32bit.
(JSC::CalleeBits::CalleeBits):
(JSC::CalleeBits::operator=):
(JSC::CalleeBits::boxWasm):
(JSC::CalleeBits::isWasm const):
(JSC::CalleeBits::asWasmCallee const):
* interpreter/Register.h:
(JSC::Register::unboxedFloat const):
(JSC::Register::asanUnsafeUnboxedFloat const):
* jit/AssemblyHelpers.h:
(JSC::AssemblyHelpers::unboxDouble):
* jit/RegisterAtOffsetList.cpp:
(JSC::RegisterAtOffsetList::RegisterAtOffsetList):
* jit/RegisterAtOffsetList.h:
(JSC::RegisterAtOffsetList::sizeOfAreaInBytes const):
* jit/RegisterSet.cpp:
(JSC::RegisterSet::macroScratchRegisters):
* llint/LLIntOfflineAsmConfig.h:
* llint/LowLevelInterpreter32_64.asm:
* llint/WebAssembly.asm:
* llint/WebAssembly32_64.asm: Added.
* llint/WebAssembly64.asm: Added.
* offlineasm/arm.rb:
* offlineasm/instructions.rb:
* offlineasm/registers.rb:
* offlineasm/risc.rb:
* runtime/JSCJSValue.h:
(JSC::wasmUnboxedFloat):
* runtime/JSCJSValueInlines.h:
(JSC::JSValue::JSValue):
* wasm/WasmAirIRGenerator.cpp:
(JSC::Wasm::AirIRGenerator::useSignalingMemory const):
(JSC::Wasm::AirIRGenerator::AirIRGenerator):
(JSC::Wasm::AirIRGenerator::emitCheckAndPreparePointer):
(JSC::Wasm::AirIRGenerator::addCall):
* wasm/WasmB3IRGenerator.cpp:
(JSC::Wasm::B3IRGenerator::useSignalingMemory const):
(JSC::Wasm::B3IRGenerator::B3IRGenerator):
(JSC::Wasm::B3IRGenerator::addArguments):
(JSC::Wasm::B3IRGenerator::emitCheckAndPreparePointer):
(JSC::Wasm::B3IRGenerator::memoryKind):
(JSC::Wasm::B3IRGenerator::addCall):
* wasm/WasmBinding.cpp:
(JSC::Wasm::wasmToWasm):
* wasm/WasmCallee.cpp:
(JSC::Wasm::LLIntCallee::calleeSaveRegisters):
* wasm/WasmCalleeGroup.cpp:
(JSC::Wasm::CalleeGroup::isSafeToRun):
* wasm/WasmCallingConvention.cpp:
(JSC::Wasm::jsCallingConvention):
(JSC::Wasm::wasmCallingConvention):
* wasm/WasmCallingConvention.h:
(JSC::Wasm::CallInformation::computeResultsOffsetList):
(JSC::Wasm::WasmCallingConvention::WasmCallingConvention):
(JSC::Wasm::WasmCallingConvention::marshallLocationImpl const):
(JSC::Wasm::WasmCallingConvention::marshallLocation const):
(JSC::Wasm::JSCallingConvention::JSCallingConvention):
(JSC::Wasm::JSCallingConvention::marshallLocationImpl const):
(JSC::Wasm::JSCallingConvention::marshallLocation const):
(JSC::Wasm::JSCallingConvention::callInformationFor const):
* wasm/WasmFormat.h:
* wasm/WasmIndexOrName.cpp:
(JSC::Wasm::IndexOrName::IndexOrName):
(JSC::Wasm::makeString):
* wasm/WasmIndexOrName.h:
(JSC::Wasm::IndexOrName::IndexOrName):
(JSC::Wasm::IndexOrName::isEmpty const):
(JSC::Wasm::IndexOrName::isIndex const):
(JSC::Wasm::IndexOrName::isName const):
(JSC::Wasm::IndexOrName::index const):
(JSC::Wasm::IndexOrName::name const):
(JSC::Wasm::IndexOrName::nameSection const):
* wasm/WasmInstance.h:
(JSC::Wasm::Instance::updateCachedMemory):
* wasm/WasmLLIntGenerator.cpp:
(JSC::Wasm::LLIntGenerator::virtualRegisterForWasmLocal):
(JSC::Wasm::LLIntGenerator::callInformationForCaller):
(JSC::Wasm::LLIntGenerator::callInformationForCallee):
(JSC::Wasm::LLIntGenerator::addArguments):
(JSC::Wasm::LLIntGenerator::addLoop):
* wasm/WasmLLIntPlan.cpp:
(JSC::Wasm::LLIntPlan::didCompleteCompilation):
* wasm/WasmMemory.cpp:
(JSC::Wasm::MemoryHandle::~MemoryHandle):
(JSC::Wasm::Memory::tryCreate):
(JSC::Wasm::Memory::growShared):
(JSC::Wasm::Memory::grow):
(JSC::Wasm::Memory::copy):
* wasm/WasmMemory.h:
* wasm/WasmMemoryInformation.cpp:
(JSC::Wasm::PinnedRegisterInfo::get):
* wasm/WasmMemoryInformation.h:
(JSC::Wasm::PinnedRegisterInfo::toSave const):
* wasm/WasmMemoryMode.cpp:
(JSC::Wasm::makeString):
* wasm/WasmMemoryMode.h:
* wasm/WasmOpcodeOrigin.cpp:
* wasm/WasmOpcodeOrigin.h:
* wasm/WasmOperations.cpp:
(JSC::Wasm::JSC_DEFINE_JIT_OPERATION):
* wasm/WasmOperations.h:
* wasm/WasmPageCount.h:
* wasm/WasmParser.h:
(JSC::Wasm::Parser<SuccessType>::parseUInt32):
(JSC::Wasm::Parser<SuccessType>::parseUInt64):
* wasm/WasmSlowPaths.cpp:
(JSC::LLInt::WASM_SLOW_PATH_DECL):
(JSC::LLInt::slow_path_wasm_popcount):
(JSC::LLInt::slow_path_wasm_popcountll):
(JSC::LLInt::slow_path_wasm_i32_div_s):
(JSC::LLInt::slow_path_wasm_i32_div_u):
(JSC::LLInt::slow_path_wasm_i32_rem_s):
(JSC::LLInt::slow_path_wasm_i32_rem_u):
(JSC::LLInt::slow_path_wasm_i64_div_s):
(JSC::LLInt::slow_path_wasm_i64_div_u):
(JSC::LLInt::slow_path_wasm_i64_rem_s):
(JSC::LLInt::slow_path_wasm_i64_rem_u):
* wasm/WasmSlowPaths.h:
* wasm/WasmValueLocation.cpp:
(JSC::Wasm::ValueLocation::dump const):
(WTF::printInternal):
* wasm/WasmValueLocation.h:
(JSC::Wasm::ValueLocation::ValueLocation):
(JSC::Wasm::ValueLocation::isGPR const):
(JSC::Wasm::ValueLocation::isFPR const):
(JSC::Wasm::ValueLocation::isStack const):
(JSC::Wasm::ValueLocation::isStackArgument const):
(JSC::Wasm::ValueLocation::jsr const):
(JSC::Wasm::ValueLocation::fpr const):
(JSC::Wasm::ValueLocation::reg): Deleted.
(JSC::Wasm::ValueLocation::isReg const): Deleted.
(JSC::Wasm::ValueLocation::reg const): Deleted.
(JSC::Wasm::ValueLocation::gpr const): Deleted.
* wasm/js/JSToWasm.cpp:
(JSC::Wasm::marshallJSResult):
(JSC::Wasm::createJSToWasmWrapper):
* wasm/js/WasmToJS.cpp:
(JSC::Wasm::wasmToJS):
* wasm/js/WebAssemblyFunction.cpp:
(JSC::WebAssemblyFunction::previousInstanceOffset const):
(JSC::WebAssemblyFunction::jsCallEntrypointSlow):
* wasm/js/WebAssemblyGlobalConstructor.cpp:
(JSC::JSC_DEFINE_HOST_FUNCTION):
* wasm/js/WebAssemblyModuleRecord.cpp:
(JSC::WebAssemblyModuleRecord::initializeExports):
* wtf/PlatformEnable.h: enable WebAssembly on ARMv7.
* Scripts/run-jsc-stress-tests: allow to run the wasm tests on
armv7 even without jit support (for now).

Canonical link: https://commits.webkit.org/251045@main

git-svn-id: http://svn.webkit.org/repository/webkit/trunk@294934 268f45cc-cd09-0410-ab3c-d52691b4dbfc
59 files changed
tree: e9526e9dd131e2af7245acba47c5cf0bb073f4cc
  1. .github/
  2. JSTests/
  3. LayoutTests/
  4. ManualTests/
  5. metadata/
  6. PerformanceTests/
  7. resources/
  8. Source/
  9. Tools/
  10. WebDriverTests/
  11. WebKit.xcworkspace/
  12. WebKitLibraries/
  13. Websites/
  14. .ccls
  15. .clang-format
  16. .clangd
  17. .dir-locals.el
  18. .editorconfig
  19. .gitattributes
  20. .gitignore
  21. CMakeLists.txt
  22. Introduction.md
  23. Makefile
  24. Makefile.shared
  25. ReadMe.md
ReadMe.md

WebKit

WebKit is a cross-platform web browser engine. On iOS and macOS, it powers Safari, Mail, iBooks, and many other applications.

Feature Status

Visit WebKit Feature Status page to see which Web API has been implemented, in development, or under consideration.

Trying the Latest

On macOS, download Safari Technology Preview to test the latest version of WebKit. On Linux, download Epiphany Technology Preview. On Windows, you'll have to build it yourself.

Reporting Bugs

  1. Search WebKit Bugzilla to see if there is an existing report for the bug you've encountered.
  2. Create a Bugzilla account to to report bugs (and to comment on them) if you haven't done so already.
  3. File a bug in accordance with our guidelines.

Once your bug is filed, you will receive email when it is updated at each stage in the bug life cycle. After the bug is considered fixed, you may be asked to download the latest nightly and confirm that the fix works for you.

Getting the Code

On Windows, follow the instructions on our website.

Cloning the Git SVN Repository

Run the following command to clone WebKit's Git SVN repository:

git clone https://github.com/WebKit/WebKit.git WebKit

If you want to be able to track Subversion revision from your git checkout, you can run the following command to do so:

Tools/Scripts/git-webkit setup-git-svn

For information about this, and other aspects of using Git with WebKit, read the wiki page.

Building WebKit

Building macOS Port

Install Xcode and its command line tools if you haven't done so already:

  1. Install Xcode Get Xcode from https://developer.apple.com/downloads. To build WebKit for OS X, Xcode 5.1.1 or later is required. To build WebKit for iOS Simulator, Xcode 7 or later is required.
  2. Install the Xcode Command Line Tools In Terminal, run the command: xcode-select --install

Run the following command to build a debug build with debugging symbols and assertions:

Tools/Scripts/build-webkit --debug

For performance testing, and other purposes, use --release instead.

Using Xcode

You can open WebKit.xcworkspace to build and debug WebKit within Xcode.

If you don't use a custom build location in Xcode preferences, you have to update the workspace settings to use WebKitBuild directory. In menu bar, choose File > Workspace Settings, then click the Advanced button, select “Custom”, “Relative to Workspace”, and enter WebKitBuild for both Products and Intermediates.

Embedded Builds

iOS, tvOS and watchOS are all considered embedded builds. The first time after you install a new Xcode, you will need to run:

sudo Tools/Scripts/configure-xcode-for-embedded-development

Without this step, you will see the error message: “target specifies product type ‘com.apple.product-type.tool’, but there’s no such product type for the ‘iphonesimulator’ platform.” when building target JSCLLIntOffsetsExtractor of project JavaScriptCore.

Run the following command to build a debug build with debugging symbols and assertions for embedded simulators:

Tools/Scripts/build-webkit --debug --<platform>-simulator

or embedded devices:

Tools/Scripts/build-webkit --debug --<platform>-device

where platform is ios, tvos or watchos.

Building the GTK+ Port

For production builds:

cmake -DPORT=GTK -DCMAKE_BUILD_TYPE=RelWithDebInfo -GNinja
ninja
sudo ninja install

For development builds:

Tools/gtk/install-dependencies
Tools/Scripts/update-webkitgtk-libs
Tools/Scripts/build-webkit --gtk --debug

For more information on building WebKitGTK+, see the wiki page.

Building the WPE Port

For production builds:

cmake -DPORT=WPE -DCMAKE_BUILD_TYPE=RelWithDebInfo -GNinja
ninja
sudo ninja install

For development builds:

Tools/wpe/install-dependencies
Tools/Scripts/update-webkitwpe-libs
Tools/Scripts/build-webkit --wpe --debug

Building Windows Port

For building WebKit on Windows, see the wiki page.

Running WebKit

With Safari and Other macOS Applications

Run the following command to launch Safari with your local build of WebKit:

Tools/Scripts/run-safari --debug

The run-safari script sets the DYLD_FRAMEWORK_PATH environment variable to point to your build products, and then launches /Applications/Safari.app. DYLD_FRAMEWORK_PATH tells the system loader to prefer your build products over the frameworks installed in /System/Library/Frameworks.

To run other applications with your local build of WebKit, run the following command:

Tools/Scripts/run-webkit-app <application-path>

iOS Simulator

Run the following command to launch iOS simulator with your local build of WebKit:

run-safari --debug --ios-simulator

In both cases, if you have built release builds instead, use --release instead of --debug.

Linux Ports

If you have a development build, you can use the run-minibrowser script, e.g.:

run-minibrowser --debug --wpe

Pass one of --gtk, --jsc-only, or --wpe to indicate the port to use.

Contribute

Congratulations! You’re up and running. Now you can begin coding in WebKit and contribute your fixes and new features to the project. For details on submitting your code to the project, read Contributing Code.