#!/usr/bin/env perl

# Copyright (C) 2005-2017 Apple Inc.  All rights reserved.
# Copyright (C) 2007 Eric Seidel <eric@webkit.org>
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions
# are met:
#
# 1.  Redistributions of source code must retain the above copyright
#     notice, this list of conditions and the following disclaimer.
# 2.  Redistributions in binary form must reproduce the above copyright
#     notice, this list of conditions and the following disclaimer in the
#     documentation and/or other materials provided with the distribution.
# 3.  Neither the name of Apple Inc. ("Apple") nor the names of
#     its contributors may be used to endorse or promote products derived
#     from this software without specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY APPLE AND ITS CONTRIBUTORS "AS IS" AND ANY
# EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
# WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
# DISCLAIMED. IN NO EVENT SHALL APPLE OR ITS CONTRIBUTORS BE LIABLE FOR ANY
# DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
# (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
# LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
# ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
# THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

# Script to run the WebKit Open Source Project JavaScriptCore tests (adapted from Mozilla),
# as well as other tests: testapi on Mac and LayoutTests/js.

use strict;
use warnings;
use File::Spec;
use FindBin;
use Getopt::Long qw(:config pass_through);
use JSON::PP;
use lib $FindBin::Bin;
use List::Util qw(min max);
use POSIX;
use webkitdirs;
use Text::ParseWords;

# determine configuration
setConfiguration();
my $configuration = configuration();

# These variables are intentionally left undefined.
my $root;
my $showHelp;
my @extraTests = ();
my $childProcesses;
my $shellRunner;
my $makeRunner;
my $rubyRunner;
my $testWriter;
my $memoryLimited;

my $report;
my $buildbotMaster;
my $builderName;
my $buildNumber;
my $buildbotWorker;

my $buildJSC = 1;
my $copyJSC = 1;

use constant {
    ENV_VAR_SAYS_DO_RUN => 4,
    ENV_VAR_SAYS_DONT_RUN => 3,
    RUN_IF_NO_TESTS_SPECIFIED => 2,
    DO_RUN => 1,
    DONT_RUN => 0,
};

my $runTestMasm = RUN_IF_NO_TESTS_SPECIFIED;
my $runTestAir = RUN_IF_NO_TESTS_SPECIFIED;
my $runTestB3 = RUN_IF_NO_TESTS_SPECIFIED;
my $runTestDFG = RUN_IF_NO_TESTS_SPECIFIED;
my $runTestAPI = RUN_IF_NO_TESTS_SPECIFIED;
my $runJSCStress = RUN_IF_NO_TESTS_SPECIFIED;
my $runMozillaTests = RUN_IF_NO_TESTS_SPECIFIED;

# $runJITStressTests is special because it is not for enabling a different set of tests.
# Instead it is only meaningful for when we want to disable using JIT test configurations
# on the JSC stress test or mozilla tests.
my $runJITStressTests = 1;

my $runQuickMode = 0;

my $forceCollectContinuously = 0;
my $envVars = "";
my $gmallocPath = undef;
my $gmallocDefaultPath = "/usr/lib/libgmalloc.dylib";

my $createTarball = 0;
my $remoteHost = 0;
my $model = 0;
my $version;
my $versionName;
my $sdk;
my $failFast = 1;
my $coverage = 0;
my $coverageDir;
my %jsonData = ();
my %reportData = ();
my @testResults = ();
my $isTestFailed = 0;
my $remoteConfigFile;
my $jsonFileName;
my $verbose = 0;

if ($ENV{RUN_JAVASCRIPTCORE_TESTS_TESTMASM}) {
    if ($ENV{RUN_JAVASCRIPTCORE_TESTS_TESTMASM} eq "true") {
        $runTestMasm = ENV_VAR_SAYS_DO_RUN;
    } elsif ($ENV{RUN_JAVASCRIPTCORE_TESTS_TESTMASM} eq "false") {
        $runTestMasm = ENV_VAR_SAYS_DONT_RUN;
    } else {
        print "Don't recognize value for RUN_JAVASCRIPTCORE_TESTS_TESTMASM environment variable: '"
            . $ENV{RUN_JAVASCRIPTCORE_TESTS_TESTMASM} . "'. Should be set to 'true' or 'false'.\n";
    }
}

if ($ENV{RUN_JAVASCRIPTCORE_TESTS_TESTAIR}) {
    if ($ENV{RUN_JAVASCRIPTCORE_TESTS_TESTAIR} eq "true") {
        $runTestAir = ENV_VAR_SAYS_DO_RUN;
    } elsif ($ENV{RUN_JAVASCRIPTCORE_TESTS_TESTAIR} eq "false") {
        $runTestAir = ENV_VAR_SAYS_DONT_RUN;
    } else {
        print "Don't recognize value for RUN_JAVASCRIPTCORE_TESTS_TESTAIR environment variable: '"
            . $ENV{RUN_JAVASCRIPTCORE_TESTS_TESTAIR} . "'. Should be set to 'true' or 'false'.\n";
    }
}

if ($ENV{RUN_JAVASCRIPTCORE_TESTS_TESTB3}) {
    if ($ENV{RUN_JAVASCRIPTCORE_TESTS_TESTB3} eq "true") {
        $runTestB3 = ENV_VAR_SAYS_DO_RUN;
    } elsif ($ENV{RUN_JAVASCRIPTCORE_TESTS_TESTB3} eq "false") {
        $runTestB3 = ENV_VAR_SAYS_DONT_RUN;
    } else {
        print "Don't recognize value for RUN_JAVASCRIPTCORE_TESTS_TESTB3 environment variable: '"
            . $ENV{RUN_JAVASCRIPTCORE_TESTS_TESTB3} . "'. Should be set to 'true' or 'false'.\n";
    }
}

if ($ENV{RUN_JAVASCRIPTCORE_TESTS_TESTDFG}) {
    if ($ENV{RUN_JAVASCRIPTCORE_TESTS_TESTDFG} eq "true") {
        $runTestDFG = ENV_VAR_SAYS_DO_RUN;
    } elsif ($ENV{RUN_JAVASCRIPTCORE_TESTS_TESTDFG} eq "false") {
        $runTestDFG = ENV_VAR_SAYS_DONT_RUN;
    } else {
        print "Don't recognize value for RUN_JAVASCRIPTCORE_TESTS_TESTDFG environment variable: '"
            . $ENV{RUN_JAVASCRIPTCORE_TESTS_TESTDFG} . "'. Should be set to 'true' or 'false'.\n";
    }
}

if ($ENV{RUN_JAVASCRIPTCORE_TESTS_TESTAPI}) {
    if ($ENV{RUN_JAVASCRIPTCORE_TESTS_TESTAPI} eq "true") {
        $runTestAPI = ENV_VAR_SAYS_DO_RUN;
    } elsif ($ENV{RUN_JAVASCRIPTCORE_TESTS_TESTAPI} eq "false") {
        $runTestAPI = ENV_VAR_SAYS_DONT_RUN;
    } else {
        print "Don't recognize value for RUN_JAVASCRIPTCORE_TESTS_TESTAPI environment variable: '"
            . $ENV{RUN_JAVASCRIPTCORE_TESTS_TESTAPI} . "'. Should be set to 'true' or 'false'.\n";
    }
}

if ($ENV{RUN_JAVASCRIPTCORE_TESTS_BUILD}) {
    if ($ENV{RUN_JAVASCRIPTCORE_TESTS_BUILD} eq "true") {
        $buildJSC = 1;
    } elsif ($ENV{RUN_JAVASCRIPTCORE_TESTS_BUILD} eq "false") {
        $buildJSC = 0;
    } else {
        print "Don't recognize value for RUN_JAVASCRIPTCORE_TESTS_BUILD environment variable: '"
            . $ENV{RUN_JAVASCRIPTCORE_TESTS_BUILD} . "'. Should be set to 'true' or 'false'.\n";
    }
}

if ($ENV{RUN_JAVASCRIPTCORE_TESTS_COPY}) {
    if ($ENV{RUN_JAVASCRIPTCORE_TESTS_COPY} eq "true") {
        $copyJSC = 1;
    } elsif ($ENV{RUN_JAVASCRIPTCORE_TESTS_COPY} eq "false") {
        $copyJSC = 0;
    } else {
        print "Don't recognize value for RUN_JAVASCRIPTCORE_TESTS_COPY environment variable: '"
            . $ENV{RUN_JAVASCRIPTCORE_TESTS_COPY} . "'. Should be set to 'true' or 'false'.\n";
    }
}

if ($ENV{RUN_JAVASCRIPTCORE_TESTS_EXTRA_TESTS}) {
    push @extraTests, $ENV{RUN_JAVASCRIPTCORE_TESTS_EXTRA_TESTS};
}

sub defaultStringForTestState {
    my ($state) = @_;
    if ($state == ENV_VAR_SAYS_DONT_RUN) {
        return "will not run due to environment variable";
    } elsif ($state == DONT_RUN) {
        return "will not run";
    } else {
        return "will run";
    }
}

# Additional environment parameters
push @ARGV, parse_line('\s+', 0, $ENV{'TEST_JSC_ARGS'}) if ($ENV{'TEST_JSC_ARGS'});

my $programName = basename($0);
my $buildJSCDefault = $buildJSC ? "will check" : "will not check";
my $testmasmDefault = defaultStringForTestState($runTestMasm);
my $testairDefault = defaultStringForTestState($runTestAir);
my $testb3Default = defaultStringForTestState($runTestB3);
my $testDFGDefault = defaultStringForTestState($runTestDFG);
my $testapiDefault = defaultStringForTestState($runTestAPI);
my $jscStressDefault = defaultStringForTestState($runJSCStress);
my $mozillaTestsDefault = defaultStringForTestState($runMozillaTests);
my $jitStressTestsDefault = $runJITStressTests ? "will run" : " will not run";
my $quickModeDefault = $runQuickMode ? "some" : "all";
my $failFastDefault = $failFast ? "fail fast" : "don't fail fast";
my $coverageDefault = $coverage ? "coverage enabled" : "coverage disabled";
my $copyJSCDefault = $copyJSC ? "copy" : "do not copy";
my $filter;
my $usage = <<EOF;
Usage: $programName [options] [options to pass to build system]
  --help                        Show this help message
  --root=                       Path to pre-built root containing jsc
  --[no-]ftl-jit                Turn the FTL JIT on or off
  --[no-]build                  Check (or don't check) to see if the jsc build is up-to-date (default: $buildJSCDefault)
  --[no-]testmasm               Only run (or don't run) testmasm (default: $testmasmDefault)
  --[no-]testair                Only run (or don't run) testair (default: $testairDefault)
  --[no-]testb3                 Only run (or don't run) testb3 (default: $testb3Default)
  --[no-]testdfg                Only run (or don't run) testdfg (default: $testDFGDefault)
  --[no-]testapi                Only run (or don't run) testapi (default: $testapiDefault)
  --[no-]jsc-stress             Only run (or don't run) the JSC stress tests (default: $jscStressDefault)
  --[no-]mozilla-tests          Only run (or don't run) the Mozilla tests (default: $mozillaTestsDefault)
  --[no-]jit-stress-tests       Run (or don't run) the JIT stress tests (default: $jitStressTestsDefault)
  --[no-]quick                  Run some (or all) of the regular testing modes (default: $quickModeDefault)
                                If the runner only runs some it will run the default and no-cjit-validate modes.
                                Note, this will not change the behavior of tests that specify their own modes.

  --[no-]fail-fast              Stop this script when a test family reports an error or failure (default: $failFastDefault)
  --[no-]force-collectContinuously Enable the collectContinuously mode even if it was disabled on this platform.
  --[no-]copy                   Copy (or don't copy) the JavaScriptCore build product before testing (default: $copyJSCDefault)
  --[no-]coverage               Enable (or disable) LLVM Source-based Code Coverage instrumentation for the test run (default: $coverageDefault).
  --coverage-dir=               Output path for LLVM Source-based Code Coverage instrumentation (default: a temporary directory).
  --json-output=                Create a file at specified path, listing failed stress tests in JSON format.
  --tarball                     Create a tarball of the bundle produced by running the JSC stress tests.
  --remote=                     Run the JSC stress tests on the specified remote host. Implies --tarball.
  --remote-config-file=         Same as remote, but read config from JSON file.
  --model=                      Specify remote hardware model, this info used for determine what jsc tests should run on remote
  --version                     Specify the version number of the device running tests.
  --version-name                Specify the version name of the hardware running tests.
  --sdk                         Specific SDK or OS version of the form ##*###
  --extra-tests=                Path to a file containing extra tests
  --child-processes=            Specify the number of child processes.
  --shell-runner                Uses the shell-based test runner instead of the default make-based runner.
                                In general the shell runner is slower than the make runner.
  --make-runner                 Uses the faster make-based runner.
  --ruby-runner                 Uses the ruby runner for machines without unix shell or make.

  --test-writer [writer]        Specifies the test script format."
                                default is to use shell scripts to run the tests"
                                \"ruby\" to use ruby scripts for systems without a unix shell.

  --memory-limited              Indicate that we are targeting the test for a memory limited device.
                                Skip tests tagged with //\@skip if \$memoryLimited

  --filter                      Only run tests whose name matches the given regular expression.
  --env-vars                    Pass a list of environment variables to set before running tests.
                                Each environment variable should be separated by a space.
                                e.g. \"foo=bar x=y\" (no quotes).
  --gmalloc:                    Run tests with Guard Malloc enabled (if no path is given: $gmallocDefaultPath is used)
  --verbose:                    Verbose output (specify more than once to increase verbosity).

  --report:                     Results database url to report results to.
  --buildbot-master:            The url of the buildbot master.
  --builder-name:               The name of the buildbot builder tests were run on.
  --build-number:               The buildbot build number tests are associated with.
  --buildbot-worker:            The buildbot worker tests were run on.

Environment Variables:
  - set RUN_JAVASCRIPTCORE_TESTS_TESTMASM to "true" or "false" (no quotes) to determine if we run testmasm by default.
  - set RUN_JAVASCRIPTCORE_TESTS_TESTAIR to "true" or "false" (no quotes) to determine if we run testair by default.
  - set RUN_JAVASCRIPTCORE_TESTS_TESTB3 to "true" or "false" (no quotes) to determine if we run testb3 by default.
  - set RUN_JAVASCRIPTCORE_TESTS_TESTDFG to "true" or "false" (no quotes) to determine if we run testdfg by default.
  - set RUN_JAVASCRIPTCORE_TESTS_TESTAPI to "true" or "false" (no quotes) to determine if we run testapi by default.
  - set RUN_JAVASCRIPTCORE_TESTS_BUILD to "true" or "false" (no quotes) to set the should-we-build-before-running-tests setting.
  - set RUN_JAVASCRIPTCORE_TESTS_EXTRA_TESTS to the path of a yaml file or a directory of JS files to be run as part of run-javascriptcore-tests.

If one or more --<testname> options are specified, only those tests will run. For example,
the following only runs testmasm and testapi:
    \$ run-javascriptcore-tests --testmasm --testapi

Otherwise, all tests will run unless the test is disabled using --no-<testname> or an
environment variable.
EOF

GetOptions(
    'root=s' => \$root,
    'extra-tests=s' => \@extraTests,
    'build!' => \$buildJSC,
    'testmasm!' => \$runTestMasm,
    'testair!' => \$runTestAir,
    'testb3!' => \$runTestB3,
    'testdfg!' => \$runTestDFG,
    'testapi!' => \$runTestAPI,
    'jsc-stress!' => \$runJSCStress,
    'mozilla-tests!' => \$runMozillaTests,
    'jit-stress-tests!' => \$runJITStressTests,
    'quick!' => \$runQuickMode,
    'fail-fast!' => \$failFast,
    'force-collectContinuously!' => \$forceCollectContinuously,
    'copy!' => \$copyJSC,
    'coverage!' => \$coverage,
    'coverage-dir=s' => \$coverageDir,
    'json-output=s' => \$jsonFileName,
    'tarball!' => \$createTarball,
    'remote=s' => \$remoteHost,
    'model=s' => \$model,
    'version=s' => \$version,
    'version-name=s' => \$versionName,
    'sdk=s' => \$sdk,
    'remote-config-file=s' => \$remoteConfigFile,
    'child-processes=s' => \$childProcesses,
    'shell-runner' => \$shellRunner,
    'make-runner' => \$makeRunner,
    'ruby-runner' => \$rubyRunner,
    'test-writer=s' => \$testWriter,
    'memory-limited' => \$memoryLimited,
    'filter=s' => \$filter,
    'help' => \$showHelp,
    'env-vars=s' => \$envVars,
    'gmalloc:s' => \$gmallocPath,
    'verbose+' => \$verbose,
    'report=s' => \$report,
    'buildbot-master=s' => \$buildbotMaster,
    'builder-name=s' => \$builderName,
    'build-number=s' => \$buildNumber,
    'buildbot-worker=s' => \$buildbotWorker,
);


my $specificTestsSpecified = 0;
if ($runTestMasm == DO_RUN
   || $runTestAir == DO_RUN
   || $runTestB3 == DO_RUN
   || $runTestDFG == DO_RUN
   || $runTestAPI == DO_RUN
   || $runJSCStress == DO_RUN
   || $runMozillaTests == DO_RUN) {
    $specificTestsSpecified = 1;
}

if ($version) {
    $version = splitVersionString($version);
}

sub enableTestOrNot {
    my ($state) = @_;
    if ($state == RUN_IF_NO_TESTS_SPECIFIED || $state == ENV_VAR_SAYS_DO_RUN) {
        return $specificTestsSpecified ? DONT_RUN : DO_RUN;
    } elsif ($state == ENV_VAR_SAYS_DONT_RUN) {
        return DONT_RUN;
    }
    return $state;
}

sub configurationForUpload()
{
    my $platform;
    my $sdk;
    my $simulator = 0;

    if (index(xcodeSDKPlatformName(), "simulator") != -1) {
        $simulator = 1;
    }

    if (index($model, 'iPhone') != -1 || index($model, 'iPad') != -1) {
        $platform = 'ios';
        if (!$version) {
            $version = iosVersion();
        }
    } elsif (index($model, 'watch') != -1 || index(xcodeSDKPlatformName(), "watch") != -1) {
        $platform = 'watchos';
        die "No watchOS version specified" if !$version;
    } elsif (index(xcodeSDKPlatformName(), "appletv") != -1) {
        $platform = 'tvos';
        die "No tvOS version specified" if !$version;
    } elsif (isGtk()) {
        $platform = 'GTK';
        if (!$version) {
            chomp($version = `uname -r`);
            $version = splitVersionString($version);
        }
    } elsif (isWPE()) {
        $platform = 'WPE';
        if (!$version) {
            chomp($version = `uname -r`);
            $version = splitVersionString($version);
        }
    } elsif (isAnyWindows()) {
        $platform = 'win';
        if (!$version) {
            $version = winVersion();
        }
    } elsif (isAppleMacWebKit()) {
        $platform = 'mac';
        chomp($model = `/usr/sbin/sysctl -n hw.model`);
        if (!$version) {
            $version = osXVersion();
        }
        if (!$sdk) {
            chomp($sdk = `/usr/bin/sw_vers -buildVersion`);
        }

        if (!$versionName) {
            if ($version->{minor} eq 15) {
                $versionName = "Catalina";
            } elsif ($version->{minor} eq 14) {
                $versionName = "Mojave";
            } elsif ($version->{minor} eq 13) {
                $versionName = "High Sierra";
            }
        }
    } else {
        # FIXME: This will be the kernel version, which is not always exactly what we want, but it will at least
        # always give us something to work with
        chomp($platform = `uname`);
        $platform = lc $platform;
        if (!$version) {
            chomp($version = `uname -r`);
            $version = splitVersionString($version);
        }
    }

    my $result = {
        platform => $platform,
        architecture => architecture(),
        is_simulator => $simulator,
        style => lc(configuration()),
        version => "$version->{major}.$version->{minor}.$version->{subminor}",
    };
    if ($model) {
        $result->{model} = $model;
    }
    if ($versionName) {
        $result->{version_name} = $versionName;
    }
    if ($sdk) {
        $result->{sdk} = $sdk;
    }
    return $result;
}

$runTestMasm = enableTestOrNot($runTestMasm);
$runTestAir = enableTestOrNot($runTestAir);
$runTestB3 = enableTestOrNot($runTestB3);
$runTestDFG = enableTestOrNot($runTestDFG);
$runTestAPI = enableTestOrNot($runTestAPI);
$runJSCStress = enableTestOrNot($runJSCStress);
$runMozillaTests = enableTestOrNot($runMozillaTests);

# Assume any arguments left over from GetOptions are assumed to be build arguments
my @buildArgs = @ARGV;

if ($showHelp) {
   print STDERR $usage;
   exit 1;
}

setConfigurationProductDir(Cwd::abs_path($root)) if (defined($root));
configurationForUpload() if (defined($report));

if (defined($jsonFileName)) {
    $jsonFileName = File::Spec->rel2abs($jsonFileName);
}

if (!defined($root) && $buildJSC) {
    chdirWebKit();

    push(@buildArgs, argumentsForConfiguration());

    print "Running: build-jsc " . join(" ", @buildArgs) . "\n";
    my $buildResult = system "perl", File::Spec->catfile("Tools", "Scripts", "build-jsc"), @buildArgs;
    if ($buildResult) {
        print STDERR "Compiling jsc failed!\n";
        exit exitStatus($buildResult);
    }
}

if (defined($gmallocPath)) {
    if ($gmallocPath eq "") {
        $envVars .= " DYLD_INSERT_LIBRARIES=" . $gmallocDefaultPath;
    } else {
        $envVars .= " DYLD_INSERT_LIBRARIES=" . $gmallocPath;
    }
}

my $htmlDir;
my $profdataPath;

if ($coverage) {
    if ($coverageDir) {
        print "Using output path specified on the command line for coverage data: $coverageDir\n";
    } else {
        $coverageDir = tempdir();
        print "Generating coverage data into $coverageDir\n";
    }
    $htmlDir = File::Spec->catfile($coverageDir, "html_report");
    $profdataPath = File::Spec->catfile($coverageDir, "jsc_tests.profdata");
    $envVars .=  " LLVM_PROFILE_FILE=" . File::Spec->catfile($coverageDir, "jsc_test_%9m.profraw");
} else {
    if ($coverageDir) {
        die "--coverage-dir= is set but --coverage is not set\n"
    }
}

my $productDir = jscProductDir();
$ENV{DYLD_FRAMEWORK_PATH} = $productDir;
$ENV{JSCTEST_timeout} = 120 unless $ENV{JSCTEST_timeout}; # Set a 120 second timeout on all jsc tests (if environment variable not defined already).
$ENV{TZ}="US/Pacific"; # Some tests fail if the time zone is not set to US/Pacific (<https://webkit.org/b/136363>)
setPathForRunningWebKitApp(\%ENV) if isCygwin();

my $startTime = time();
my $endTime = $startTime;

sub testPath {
    my ($productDir, $testName) = @_;
    $testName .= "_debug" if configuration() eq "Debug_All";
    return File::Spec->catfile($productDir, $testName);
}

sub runTest {
    my ($testName, $jsonTestStatusName) = @_;

    chdirWebKit();
    chdir($productDir) or die "Failed to switch directory to '$productDir'\n";
    my @command = (testPath($productDir, $testName));
    unshift @command, ("xcrun", "-sdk", xcodeSDK(), "sim") if willUseIOSSimulatorSDK();
    unshift @command, wrapperPrefixIfNeeded() if shouldUseJhbuild();

    if ($envVars ne "") {
        foreach my $var (split(/\s+/, $envVars)) {
            if ($var =~ /([^=]*)=(.*)/) {
                $ENV{$1} = $2;
            }
        }
    }

    my $testResult = 0;
    my $lastOptimizeLevel;

    open(TEST, "-|", "@command 2>&1") or die "Failed to run @command";
    while ( my $line = <TEST> ) {
        print $line if ($verbose);
    }
    $testResult = close(TEST) ? 0 : $?;
    $reportData{$testName} = $testResult ? {actual => "FAIL"} : {actual => "PASS"};

    my $exitStatus = exitStatus($testResult);
    print "$testName completed with rc=$testResult ($exitStatus)\n\n";

    if ($testResult) {
        $isTestFailed = 1;
        push @testResults, $testName;
    }
    if (defined($jsonFileName)) {
        my $testStatus = ($exitStatus == 0)? JSON::PP::true: JSON::PP::false;
        $jsonData{$jsonTestStatusName} = $testStatus;
    }

    if ($testResult && $failFast) {
        reportTestFailures();
        writeJsonDataIfApplicable();

        $endTime = time();
        uploadResults();
        exit $exitStatus;
    }
}

sub reportTestFailures {
  my $numJSCtestFailures = @testResults;
  if ($numJSCtestFailures) {
      print "\n** The following JSC test binaries failures have been introduced:\n";
      foreach my $testFailure (@testResults) {
          print "\t$testFailure\n";
      }
  }
  print "\n";

  print "Results for JSC test binaries:\n";
  printThingsFound($numJSCtestFailures, "failure", "failures", "found");
  print "    OK.\n" if $numJSCtestFailures == 0;

  print "\n";
}

sub convertProfrawToProfdata
{
    print "Converting profraw files to profdata.\n";
    my @command;
    opendir(PROFRAWS, $coverageDir);
    my @profrawFiles = grep {/jsc_test_.*\.profraw/} map {File::Spec->catfile($coverageDir, $_)} readdir(PROFRAWS);
    close(PROFRAWS);
    push @command, "xcrun";
    push @command, ("-sdk", xcodeSDK()) if xcodeSDK();
    push @command, "llvm-profdata", "merge", @profrawFiles, "-o", $profdataPath;
    system(@command);
}

sub generateHTMLFromProfdata
{
    print "Generating html report from profdata file.\n";
    my @command;
    push @command, "xcrun";
    push @command, ("-sdk", xcodeSDK()) if xcodeSDK();
    push @command, "llvm-cov", "show", builtDylibPathForName("JavaScriptCore"), "--format=html", "--instr-profile=" . $profdataPath, "--output-dir=" . $htmlDir;
    system(@command);

    print "HTML report is in file://$htmlDir/index.html\n";
}

sub processCoverageData
{
    convertProfrawToProfdata();
    generateHTMLFromProfdata();
}

if ($runTestMasm) { runTest("testmasm", "allMasmTestsPassed") }
if ($runTestAir) { runTest("testair", "allAirTestsPassed") }
if ($runTestB3) { runTest("testb3", "allB3TestsPassed") }
if ($runTestDFG) { runTest("testdfg", "allDFGTestsPassed") }
if ($runTestAPI) { runTest("testapi", "allApiTestsPassed") }


# Find JavaScriptCore directory
chdirWebKit();

runJSCStressTests();
reportTestFailures();
if ($coverage) {
    processCoverageData();
}

$endTime = time();
uploadResults();

if ($isTestFailed) {
  exit(1);
}

sub runJSCStressTests
{
    my $jscStressResultsDir = $productDir . "/jsc-stress-results";

    my $hasTestsToRun = 0;
    my @testList;
    if ($runJSCStress) {
        @testList = (
            "PerformanceTests/SunSpider/tests/sunspider-1.0",
            "PerformanceTests/JetStream/cdjs/cdjs-tests.yaml",
            "PerformanceTests/ARES-6/Air/airjs-tests.yaml",
            "PerformanceTests/ARES-6/Basic/basic-tests.yaml",
            "JSTests/executableAllocationFuzz.yaml",
            "JSTests/exceptionFuzz.yaml",
            "PerformanceTests/SunSpider/no-architecture-specific-optimizations.yaml",
            "PerformanceTests/SunSpider/shadow-chicken.yaml",
            "PerformanceTests/SunSpider/tests/v8-v6",
            "JSTests/stress",
            "JSTests/microbenchmarks",
            "JSTests/slowMicrobenchmarks.yaml",
            "PerformanceTests/SunSpider/profiler-test.yaml",
            "LayoutTests/jsc-layout-tests.yaml",
            "JSTests/typeProfiler.yaml",
            "JSTests/controlFlowProfiler.yaml",
            "JSTests/es6.yaml",
            "JSTests/modules.yaml",
            "JSTests/complex.yaml",
            "JSTests/ChakraCore.yaml",
            "JSTests/wasm.yaml");
        $hasTestsToRun = 1;
    }

    if ($runMozillaTests) {
        push(@testList, "JSTests/mozilla/mozilla-tests.yaml");
        $hasTestsToRun = 1;
    }

    # Set LANG environment variable so the stress tests will work with newer ruby (<rdar://problem/15010705>)
    $ENV{LANG}="en_US.UTF-8";
    my @jscStressDriverCmd = (
        "/usr/bin/env", "ruby", "Tools/Scripts/run-jsc-stress-tests",
        "-j", jscPath($productDir), "-o", $jscStressResultsDir);

    push(@jscStressDriverCmd, @testList);

    if (isWindows() && !isCygwin()) {
        shift @jscStressDriverCmd; # Remove /usr/bin/env
    }

    if (configuration() eq "Debug") {
        push(@jscStressDriverCmd, "--debug");
    }

    if (!$copyJSC) {
        push(@jscStressDriverCmd, "--no-copy");
    }

    if ($forceCollectContinuously) {
        push(@jscStressDriverCmd, "--force-collectContinuously");
    }

    if ($envVars ne "") {
            push(@jscStressDriverCmd, "--env-vars");
            push(@jscStressDriverCmd, $envVars);
    }

    if ($runQuickMode) {
        push(@jscStressDriverCmd, "--quick");
    }

    if (!$runJITStressTests) {
        push(@jscStressDriverCmd, "--no-jit");
    }
    if ($createTarball) {
        push(@jscStressDriverCmd, "--tarball");
    }

    if ($remoteHost) {
        push(@jscStressDriverCmd, "--remote");
        push(@jscStressDriverCmd, $remoteHost);
    }

    if ($remoteConfigFile) {
        push(@jscStressDriverCmd, "--remote-config-file");
        push(@jscStressDriverCmd, $remoteConfigFile);
    }
    
    if ($model) {
        push(@jscStressDriverCmd, "--model");
        push(@jscStressDriverCmd, $model);
    }

    if ($childProcesses) {
        push(@jscStressDriverCmd, "--child-processes");
        push(@jscStressDriverCmd, $childProcesses);
    }

    if ($shellRunner) {
        push(@jscStressDriverCmd, "--shell-runner");
    }

    if ($makeRunner) {
        push(@jscStressDriverCmd, "--make-runner");
    }

    if ($rubyRunner) {
        push(@jscStressDriverCmd, "--ruby-runner");
    }

    if ($testWriter) {
        push(@jscStressDriverCmd, "--test-writer");
        push(@jscStressDriverCmd, $testWriter);
    }

    if ($memoryLimited) {
        push(@jscStressDriverCmd, "--memory-limited");
    }

    if ($filter) {
        push(@jscStressDriverCmd, "--filter");
        push(@jscStressDriverCmd, $filter);
    }

    push(@jscStressDriverCmd, ("--verbose") x $verbose) if ($verbose > 0);

    if (isPlayStation()) {
        push(@jscStressDriverCmd, "--os=playstation");
        push(@jscStressDriverCmd, "--no-copy");
    }

    unshift @jscStressDriverCmd, wrapperPrefixIfNeeded() if shouldUseJhbuild();

    # End option processing, the rest of the arguments are tests
    push(@jscStressDriverCmd, "--");

    for my $testSuite (@extraTests) {
        push(@jscStressDriverCmd, $testSuite);
        $hasTestsToRun = 1;
    }
    if (defined($ENV{"EXTRA_JSC_TESTS"})) {
        push(@jscStressDriverCmd, $ENV{"EXTRA_JSC_TESTS"});
        $hasTestsToRun = 1;
    }

    if (!$hasTestsToRun) {
        exit(0);
    }

    print "Running: " . join(" ", @jscStressDriverCmd) . "\n";
    my $result = system(@jscStressDriverCmd);
    exit exitStatus($result) if $result;

    my @jscStressPassList = readAllLines($jscStressResultsDir . "/passed");
    foreach my $testSucceeded (@jscStressPassList) {
        $reportData{$testSucceeded} = {actual => "PASS"};
    }

    my @jscStressFailList = readAllLines($jscStressResultsDir . "/failed");
    @jscStressFailList = sort @jscStressFailList;
    my $numJSCStressFailures = @jscStressFailList;

    if ($numJSCStressFailures) {
        $isTestFailed = 1;
        print "\n** The following JSC stress test failures have been introduced:\n";
        foreach my $testFailure (@jscStressFailList) {
            print "\t$testFailure\n";
            $reportData{$testFailure} = {actual => "FAIL"};
        }
    }
    print "\n";

    print "Results for JSC stress tests:\n";
    printThingsFound($numJSCStressFailures, "failure", "failures", "found");
    print "    OK.\n" if $numJSCStressFailures == 0;

    print "\n";

    if (defined($jsonFileName)) {
        $jsonData{'stressTestFailures'} = \@jscStressFailList;
    }

    writeJsonDataIfApplicable();
}

sub readAllLines
{
    my ($filename) = @_;
    my @array = ();
    eval {
        open FILE, $filename or die;
        while (<FILE>) {
            chomp;
            push @array, $_;
        }
        close FILE;
    };
    return @array;
}

sub printThingsFound
{
    my ($number, $label, $pluralLabel, $verb) = @_;
    print "    $number ";
    if ($number == 1) {
        print $label;
    } else {
        print $pluralLabel;
    }
    print " $verb.\n";
}

sub writeJsonDataIfApplicable
{
    if (defined($jsonFileName)) {
        open(my $fileHandler, ">", $jsonFileName) or die;
        print $fileHandler "${\encode_json(\%jsonData)}\n";
        close($fileHandler);
    }
}

sub uploadResults
{
    if (not defined $report) {
        print "Skipping upload to results database since no report URL was specified\n";
        return 0;
    }

    my @commits = [];
    my $internalCheckout = File::Spec->catdir(dirname(sourceDir()), "Internal");
    if (-e $internalCheckout and -d $internalCheckout) {
        @commits = [commitForDirectory(sourceDir(), 'webkit'), commitForDirectory($internalCheckout, 'safari')]
    } else {
        @commits = [commitForDirectory(sourceDir(), 'webkit')]
    }

    my %upload = (
        version => 0,
        suite => 'javascriptcore-tests',
        commits => @commits,
        configuration => configurationForUpload(),
        test_results => {
            run_stats => {
                start_time => $startTime,
                end_time => $endTime,
                tests_skipped => 0,
            },
            results => \%reportData,
        },
        timestamp => $startTime,
    );
    if (defined $buildbotMaster and defined $builderName and defined $buildNumber and defined $buildbotWorker) {
        $upload{test_results}{details} = {
            'buildbot-master' => $buildbotMaster,
            'builder-name' => $builderName,
            'build-number' => $buildNumber,
            'buildbot-worker' => $buildbotWorker,
        };
    } else {
        print "    No buildbot details provided, test run will not be linked to CI system\n";
    }
    if (defined $ENV{'RESULTS_SERVER_API_KEY'}) {
        $upload{'api_key'} = $ENV{'RESULTS_SERVER_API_KEY'};
    }

    print "Uploading results to $report\n";

    my $sslOptions = '';
    if (!isAppleMacWebKit()) {
        $sslOptions = '--insecure';
    }
    open(HANDLE, "|-", "curl -X POST $report/api/upload -H 'Content-Type: application/json' $sslOptions -f -d '\@-'") or die "Failed to open curl";

    # Json conforming to https://results.webkit.org/documentation#API-Uploads.
    my $encodedUpload = encode_json(\%upload);
    print HANDLE "$encodedUpload\n\0";
    my $success = close HANDLE;

    if ($success) {
        print "Upload successful!\n";
        return 0;
    }
    print "Upload to $report failed\n";
    return 1;
}