| // |
| // Copyright 2012 The ANGLE Project Authors. All rights reserved. |
| // Use of this source code is governed by a BSD-style license that can be |
| // found in the LICENSE file. |
| // |
| |
| // SwapChain11.cpp: Implements a back-end specific class for the D3D11 swap chain. |
| |
| #include "libANGLE/renderer/d3d/d3d11/SwapChain11.h" |
| |
| #include <EGL/eglext.h> |
| |
| #include "libANGLE/features.h" |
| #include "libANGLE/renderer/d3d/DisplayD3D.h" |
| #include "libANGLE/renderer/d3d/d3d11/NativeWindow11.h" |
| #include "libANGLE/renderer/d3d/d3d11/Renderer11.h" |
| #include "libANGLE/renderer/d3d/d3d11/formatutils11.h" |
| #include "libANGLE/renderer/d3d/d3d11/renderer11_utils.h" |
| #include "libANGLE/renderer/d3d/d3d11/texture_format_table.h" |
| #include "libANGLE/trace.h" |
| |
| // Precompiled shaders |
| #include "libANGLE/renderer/d3d/d3d11/shaders/compiled/passthrough2d11vs.h" |
| #include "libANGLE/renderer/d3d/d3d11/shaders/compiled/passthroughrgba2d11ps.h" |
| #include "libANGLE/renderer/d3d/d3d11/shaders/compiled/passthroughrgba2dms11ps.h" |
| #include "libANGLE/renderer/d3d/d3d11/shaders/compiled/resolvecolor2dps.h" |
| |
| #ifdef ANGLE_ENABLE_KEYEDMUTEX |
| # define ANGLE_RESOURCE_SHARE_TYPE D3D11_RESOURCE_MISC_SHARED_KEYEDMUTEX |
| #else |
| # define ANGLE_RESOURCE_SHARE_TYPE D3D11_RESOURCE_MISC_SHARED |
| #endif |
| |
| namespace rx |
| { |
| |
| namespace |
| { |
| // To avoid overflow in QPC to Microseconds calculations, since we multiply |
| // by kMicrosecondsPerSecond, then the QPC value should not exceed |
| // (2^63 - 1) / 1E6. If it exceeds that threshold, we divide then multiply. |
| static constexpr int64_t kQPCOverflowThreshold = 0x8637BD05AF7; |
| static constexpr int64_t kMicrosecondsPerSecond = 1000000; |
| |
| bool NeedsOffscreenTexture(Renderer11 *renderer, NativeWindow11 *nativeWindow, EGLint orientation) |
| { |
| // We don't need an offscreen texture if either orientation = INVERT_Y, |
| // or present path fast is enabled and we're not rendering onto an offscreen surface. |
| return orientation != EGL_SURFACE_ORIENTATION_INVERT_Y_ANGLE && |
| !(renderer->presentPathFastEnabled() && nativeWindow->getNativeWindow()); |
| } |
| } // anonymous namespace |
| |
| SwapChain11::SwapChain11(Renderer11 *renderer, |
| NativeWindow11 *nativeWindow, |
| HANDLE shareHandle, |
| IUnknown *d3dTexture, |
| GLenum backBufferFormat, |
| GLenum depthBufferFormat, |
| EGLint orientation, |
| EGLint samples) |
| : SwapChainD3D(shareHandle, d3dTexture, backBufferFormat, depthBufferFormat), |
| mRenderer(renderer), |
| mWidth(-1), |
| mHeight(-1), |
| mOrientation(orientation), |
| mAppCreatedShareHandle(mShareHandle != nullptr), |
| mSwapInterval(0), |
| mPassThroughResourcesInit(false), |
| mNativeWindow(nativeWindow), |
| mFirstSwap(true), |
| mSwapChain(nullptr), |
| mSwapChain1(nullptr), |
| mKeyedMutex(nullptr), |
| mBackBufferTexture(), |
| mBackBufferRTView(), |
| mBackBufferSRView(), |
| mNeedsOffscreenTexture(NeedsOffscreenTexture(renderer, nativeWindow, orientation)), |
| mOffscreenTexture(), |
| mOffscreenRTView(), |
| mOffscreenSRView(), |
| mNeedsOffscreenTextureCopy(false), |
| mOffscreenTextureCopyForSRV(), |
| mDepthStencilTexture(), |
| mDepthStencilDSView(), |
| mDepthStencilSRView(), |
| mQuadVB(), |
| mPassThroughSampler(), |
| mPassThroughIL(), |
| mPassThroughVS(), |
| mPassThroughOrResolvePS(), |
| mPassThroughRS(), |
| mColorRenderTarget(this, renderer, false), |
| mDepthStencilRenderTarget(this, renderer, true), |
| mEGLSamples(samples) |
| { |
| // Check that if present path fast is active then we're using the default orientation |
| ASSERT(!mRenderer->presentPathFastEnabled() || orientation == 0); |
| |
| // Get the performance counter |
| LARGE_INTEGER counterFreqency = {}; |
| BOOL success = QueryPerformanceFrequency(&counterFreqency); |
| ASSERT(success); |
| |
| mQPCFrequency = counterFreqency.QuadPart; |
| } |
| |
| SwapChain11::~SwapChain11() |
| { |
| release(); |
| } |
| |
| void SwapChain11::release() |
| { |
| // TODO(jmadill): Should probably signal that the RenderTarget is dirty. |
| |
| SafeRelease(mSwapChain1); |
| SafeRelease(mSwapChain); |
| SafeRelease(mKeyedMutex); |
| mBackBufferTexture.reset(); |
| mBackBufferRTView.reset(); |
| mBackBufferSRView.reset(); |
| mOffscreenTexture.reset(); |
| mOffscreenRTView.reset(); |
| mOffscreenSRView.reset(); |
| mDepthStencilTexture.reset(); |
| mDepthStencilDSView.reset(); |
| mDepthStencilSRView.reset(); |
| mQuadVB.reset(); |
| mPassThroughSampler.reset(); |
| mPassThroughIL.reset(); |
| mPassThroughVS.reset(); |
| mPassThroughOrResolvePS.reset(); |
| mPassThroughRS.reset(); |
| |
| if (!mAppCreatedShareHandle) |
| { |
| mShareHandle = nullptr; |
| } |
| } |
| |
| void SwapChain11::releaseOffscreenColorBuffer() |
| { |
| mOffscreenTexture.reset(); |
| mOffscreenRTView.reset(); |
| mOffscreenSRView.reset(); |
| mNeedsOffscreenTextureCopy = false; |
| mOffscreenTextureCopyForSRV.reset(); |
| } |
| |
| void SwapChain11::releaseOffscreenDepthBuffer() |
| { |
| mDepthStencilTexture.reset(); |
| mDepthStencilDSView.reset(); |
| mDepthStencilSRView.reset(); |
| } |
| |
| EGLint SwapChain11::resetOffscreenBuffers(DisplayD3D *displayD3D, |
| int backbufferWidth, |
| int backbufferHeight) |
| { |
| if (mNeedsOffscreenTexture) |
| { |
| EGLint result = resetOffscreenColorBuffer(displayD3D, backbufferWidth, backbufferHeight); |
| if (result != EGL_SUCCESS) |
| { |
| return result; |
| } |
| } |
| |
| EGLint result = resetOffscreenDepthBuffer(displayD3D, backbufferWidth, backbufferHeight); |
| if (result != EGL_SUCCESS) |
| { |
| return result; |
| } |
| |
| mWidth = backbufferWidth; |
| mHeight = backbufferHeight; |
| |
| return EGL_SUCCESS; |
| } |
| |
| EGLint SwapChain11::resetOffscreenColorBuffer(DisplayD3D *displayD3D, |
| int backbufferWidth, |
| int backbufferHeight) |
| { |
| ASSERT(mNeedsOffscreenTexture); |
| |
| ANGLE_TRACE_EVENT0("gpu.angle", "SwapChain11::resetOffscreenTexture"); |
| ID3D11Device *device = mRenderer->getDevice(); |
| |
| ASSERT(device != nullptr); |
| |
| // D3D11 does not allow zero size textures |
| ASSERT(backbufferWidth >= 1); |
| ASSERT(backbufferHeight >= 1); |
| |
| // Preserve the render target content |
| TextureHelper11 previousOffscreenTexture(std::move(mOffscreenTexture)); |
| const int previousWidth = mWidth; |
| const int previousHeight = mHeight; |
| |
| releaseOffscreenColorBuffer(); |
| |
| const d3d11::Format &backbufferFormatInfo = |
| d3d11::Format::Get(mOffscreenRenderTargetFormat, mRenderer->getRenderer11DeviceCaps()); |
| D3D11_TEXTURE2D_DESC offscreenTextureDesc = {}; |
| |
| // If the app passed in a share handle or D3D texture, open the resource |
| // See EGL_ANGLE_d3d_share_handle_client_buffer and EGL_ANGLE_d3d_texture_client_buffer |
| if (mAppCreatedShareHandle || mD3DTexture != nullptr) |
| { |
| if (mAppCreatedShareHandle) |
| { |
| ID3D11Resource *tempResource11; |
| HRESULT result = device->OpenSharedResource(mShareHandle, __uuidof(ID3D11Resource), |
| (void **)&tempResource11); |
| if (FAILED(result)) |
| { |
| ERR() << "Could not open shared handle. " << gl::FmtHR(result); |
| release(); |
| return EGL_BAD_SURFACE; |
| } |
| |
| mOffscreenTexture.set(d3d11::DynamicCastComObject<ID3D11Texture2D>(tempResource11), |
| backbufferFormatInfo); |
| SafeRelease(tempResource11); |
| } |
| else if (mD3DTexture != nullptr) |
| { |
| mOffscreenTexture.set(d3d11::DynamicCastComObject<ID3D11Texture2D>(mD3DTexture), |
| backbufferFormatInfo); |
| } |
| else |
| { |
| UNREACHABLE(); |
| } |
| ASSERT(mOffscreenTexture.valid()); |
| mOffscreenTexture.getDesc(&offscreenTextureDesc); |
| |
| // Fail if the offscreen texture is not renderable. |
| if ((offscreenTextureDesc.BindFlags & D3D11_BIND_RENDER_TARGET) == 0) |
| { |
| ERR() << "Could not use provided offscreen texture, texture not renderable."; |
| release(); |
| return EGL_BAD_SURFACE; |
| } |
| } |
| else |
| { |
| const bool useSharedResource = |
| !mNativeWindow->getNativeWindow() && mRenderer->getShareHandleSupport(); |
| |
| offscreenTextureDesc.Width = backbufferWidth; |
| offscreenTextureDesc.Height = backbufferHeight; |
| offscreenTextureDesc.Format = backbufferFormatInfo.texFormat; |
| offscreenTextureDesc.MipLevels = 1; |
| offscreenTextureDesc.ArraySize = 1; |
| offscreenTextureDesc.SampleDesc.Count = getD3DSamples(); |
| offscreenTextureDesc.SampleDesc.Quality = 0; |
| offscreenTextureDesc.Usage = D3D11_USAGE_DEFAULT; |
| offscreenTextureDesc.BindFlags = D3D11_BIND_RENDER_TARGET | D3D11_BIND_SHADER_RESOURCE; |
| offscreenTextureDesc.CPUAccessFlags = 0; |
| offscreenTextureDesc.MiscFlags = useSharedResource ? ANGLE_RESOURCE_SHARE_TYPE : 0; |
| |
| angle::Result result = mRenderer->allocateTexture(displayD3D, offscreenTextureDesc, |
| backbufferFormatInfo, &mOffscreenTexture); |
| if (result == angle::Result::Stop) |
| { |
| ERR() << "Could not create offscreen texture, " << displayD3D->getStoredErrorString(); |
| release(); |
| return EGL_BAD_ALLOC; |
| } |
| |
| mOffscreenTexture.setInternalName("OffscreenBackBufferTexture"); |
| |
| // EGL_ANGLE_surface_d3d_texture_2d_share_handle requires that we store a share handle for |
| // the client |
| if (useSharedResource) |
| { |
| IDXGIResource *offscreenTextureResource = nullptr; |
| HRESULT hr = mOffscreenTexture.get()->QueryInterface( |
| __uuidof(IDXGIResource), (void **)&offscreenTextureResource); |
| |
| // Fall back to no share handle on failure |
| if (FAILED(hr)) |
| { |
| ERR() << "Could not query offscreen texture resource, " << gl::FmtHR(hr); |
| } |
| else |
| { |
| hr = offscreenTextureResource->GetSharedHandle(&mShareHandle); |
| SafeRelease(offscreenTextureResource); |
| |
| if (FAILED(hr)) |
| { |
| mShareHandle = nullptr; |
| ERR() << "Could not get offscreen texture shared handle, " << gl::FmtHR(hr); |
| } |
| } |
| } |
| } |
| |
| // This may return null if the original texture was created without a keyed mutex. |
| mKeyedMutex = d3d11::DynamicCastComObject<IDXGIKeyedMutex>(mOffscreenTexture.get()); |
| |
| D3D11_RENDER_TARGET_VIEW_DESC offscreenRTVDesc; |
| offscreenRTVDesc.Format = backbufferFormatInfo.rtvFormat; |
| offscreenRTVDesc.ViewDimension = |
| (mEGLSamples <= 1) ? D3D11_RTV_DIMENSION_TEXTURE2D : D3D11_RTV_DIMENSION_TEXTURE2DMS; |
| offscreenRTVDesc.Texture2D.MipSlice = 0; |
| |
| angle::Result result = mRenderer->allocateResource(displayD3D, offscreenRTVDesc, |
| mOffscreenTexture.get(), &mOffscreenRTView); |
| if (result == angle::Result::Stop) |
| { |
| ERR() << "Could not create offscreen back buffer render target, " |
| << displayD3D->getStoredErrorString(); |
| release(); |
| return EGL_BAD_ALLOC; |
| } |
| mOffscreenRTView.setInternalName("OffscreenBackBufferRenderTarget"); |
| |
| D3D11_SHADER_RESOURCE_VIEW_DESC offscreenSRVDesc; |
| offscreenSRVDesc.Format = backbufferFormatInfo.srvFormat; |
| offscreenSRVDesc.ViewDimension = |
| (mEGLSamples <= 1) ? D3D11_SRV_DIMENSION_TEXTURE2D : D3D11_SRV_DIMENSION_TEXTURE2DMS; |
| offscreenSRVDesc.Texture2D.MostDetailedMip = 0; |
| offscreenSRVDesc.Texture2D.MipLevels = static_cast<UINT>(-1); |
| |
| if (offscreenTextureDesc.BindFlags & D3D11_BIND_SHADER_RESOURCE) |
| { |
| result = mRenderer->allocateResource(displayD3D, offscreenSRVDesc, mOffscreenTexture.get(), |
| &mOffscreenSRView); |
| if (result == angle::Result::Stop) |
| { |
| ERR() << "Could not create offscreen back buffer shader resource, " |
| << displayD3D->getStoredErrorString(); |
| release(); |
| return EGL_BAD_ALLOC; |
| } |
| mOffscreenSRView.setInternalName("OffscreenBackBufferShaderResource"); |
| } |
| else |
| { |
| // Special case for external textures that cannot support sampling. Since internally we |
| // assume our SwapChain is always readable, we make a copy texture that is compatible. |
| mNeedsOffscreenTextureCopy = true; |
| } |
| |
| if (previousOffscreenTexture.valid()) |
| { |
| D3D11_BOX sourceBox = {}; |
| sourceBox.left = 0; |
| sourceBox.right = std::min(previousWidth, backbufferWidth); |
| sourceBox.top = std::max(previousHeight - backbufferHeight, 0); |
| sourceBox.bottom = previousHeight; |
| sourceBox.front = 0; |
| sourceBox.back = 1; |
| |
| ID3D11DeviceContext *deviceContext = mRenderer->getDeviceContext(); |
| const int yoffset = std::max(backbufferHeight - previousHeight, 0); |
| deviceContext->CopySubresourceRegion(mOffscreenTexture.get(), 0, 0, yoffset, 0, |
| previousOffscreenTexture.get(), 0, &sourceBox); |
| |
| if (mSwapChain) |
| { |
| swapRect(displayD3D, 0, 0, backbufferWidth, backbufferHeight); |
| } |
| } |
| |
| return EGL_SUCCESS; |
| } |
| |
| EGLint SwapChain11::resetOffscreenDepthBuffer(DisplayD3D *displayD3D, |
| int backbufferWidth, |
| int backbufferHeight) |
| { |
| releaseOffscreenDepthBuffer(); |
| |
| if (mDepthBufferFormat != GL_NONE) |
| { |
| const d3d11::Format &depthBufferFormatInfo = |
| d3d11::Format::Get(mDepthBufferFormat, mRenderer->getRenderer11DeviceCaps()); |
| |
| D3D11_TEXTURE2D_DESC depthStencilTextureDesc; |
| depthStencilTextureDesc.Width = backbufferWidth; |
| depthStencilTextureDesc.Height = backbufferHeight; |
| depthStencilTextureDesc.Format = depthBufferFormatInfo.texFormat; |
| depthStencilTextureDesc.MipLevels = 1; |
| depthStencilTextureDesc.ArraySize = 1; |
| depthStencilTextureDesc.SampleDesc.Count = getD3DSamples(); |
| depthStencilTextureDesc.Usage = D3D11_USAGE_DEFAULT; |
| depthStencilTextureDesc.BindFlags = D3D11_BIND_DEPTH_STENCIL; |
| |
| // If there is a multisampled offscreen color texture, the offscreen depth-stencil texture |
| // must also have the same quality value. |
| if (mOffscreenTexture.valid() && getD3DSamples() > 1) |
| { |
| D3D11_TEXTURE2D_DESC offscreenTextureDesc = {}; |
| mOffscreenTexture.getDesc(&offscreenTextureDesc); |
| depthStencilTextureDesc.SampleDesc.Quality = offscreenTextureDesc.SampleDesc.Quality; |
| } |
| else |
| { |
| depthStencilTextureDesc.SampleDesc.Quality = 0; |
| } |
| |
| // Only create an SRV if it is supported |
| bool depthStencilSRV = |
| depthBufferFormatInfo.srvFormat != DXGI_FORMAT_UNKNOWN && |
| (mRenderer->getRenderer11DeviceCaps().supportsMultisampledDepthStencilSRVs || |
| depthStencilTextureDesc.SampleDesc.Count <= 1); |
| if (depthStencilSRV) |
| { |
| depthStencilTextureDesc.BindFlags |= D3D11_BIND_SHADER_RESOURCE; |
| } |
| |
| depthStencilTextureDesc.CPUAccessFlags = 0; |
| depthStencilTextureDesc.MiscFlags = 0; |
| |
| angle::Result result = mRenderer->allocateTexture( |
| displayD3D, depthStencilTextureDesc, depthBufferFormatInfo, &mDepthStencilTexture); |
| if (result == angle::Result::Stop) |
| { |
| ERR() << "Could not create depthstencil surface for new swap chain, " |
| << displayD3D->getStoredErrorString(); |
| release(); |
| return EGL_BAD_ALLOC; |
| } |
| mDepthStencilTexture.setInternalName("OffscreenDepthStencilTexture"); |
| |
| D3D11_DEPTH_STENCIL_VIEW_DESC depthStencilDesc; |
| depthStencilDesc.Format = depthBufferFormatInfo.dsvFormat; |
| depthStencilDesc.ViewDimension = |
| (mEGLSamples <= 1) ? D3D11_DSV_DIMENSION_TEXTURE2D : D3D11_DSV_DIMENSION_TEXTURE2DMS; |
| depthStencilDesc.Flags = 0; |
| depthStencilDesc.Texture2D.MipSlice = 0; |
| |
| result = mRenderer->allocateResource(displayD3D, depthStencilDesc, |
| mDepthStencilTexture.get(), &mDepthStencilDSView); |
| ASSERT(result != angle::Result::Stop); |
| mDepthStencilDSView.setInternalName("OffscreenDSV"); |
| |
| if (depthStencilSRV) |
| { |
| D3D11_SHADER_RESOURCE_VIEW_DESC depthStencilSRVDesc; |
| depthStencilSRVDesc.Format = depthBufferFormatInfo.srvFormat; |
| depthStencilSRVDesc.ViewDimension = (mEGLSamples <= 1) |
| ? D3D11_SRV_DIMENSION_TEXTURE2D |
| : D3D11_SRV_DIMENSION_TEXTURE2DMS; |
| depthStencilSRVDesc.Texture2D.MostDetailedMip = 0; |
| depthStencilSRVDesc.Texture2D.MipLevels = static_cast<UINT>(-1); |
| |
| result = mRenderer->allocateResource(displayD3D, depthStencilSRVDesc, |
| mDepthStencilTexture.get(), &mDepthStencilSRView); |
| ASSERT(result != angle::Result::Stop); |
| mDepthStencilSRView.setInternalName("OffscreenDepthStencilSRV"); |
| } |
| } |
| |
| return EGL_SUCCESS; |
| } |
| |
| EGLint SwapChain11::resize(DisplayD3D *displayD3D, EGLint backbufferWidth, EGLint backbufferHeight) |
| { |
| ANGLE_TRACE_EVENT0("gpu.angle", "SwapChain11::resize"); |
| ID3D11Device *device = mRenderer->getDevice(); |
| |
| if (device == nullptr) |
| { |
| return EGL_BAD_ACCESS; |
| } |
| |
| // EGL allows creating a surface with 0x0 dimension, however, DXGI does not like 0x0 swapchains |
| if (backbufferWidth < 1 || backbufferHeight < 1) |
| { |
| return EGL_SUCCESS; |
| } |
| |
| // Don't resize unnecessarily |
| if (mWidth == backbufferWidth && mHeight == backbufferHeight) |
| { |
| return EGL_SUCCESS; |
| } |
| |
| // Can only call resize if we have already created our swap buffer and resources |
| ASSERT(mSwapChain && mBackBufferTexture.valid() && mBackBufferRTView.valid() && |
| mBackBufferSRView.valid()); |
| |
| mBackBufferTexture.reset(); |
| mBackBufferRTView.reset(); |
| mBackBufferSRView.reset(); |
| |
| // Resize swap chain |
| DXGI_SWAP_CHAIN_DESC desc; |
| HRESULT hr = mSwapChain->GetDesc(&desc); |
| if (FAILED(hr)) |
| { |
| ERR() << "Error reading swap chain description, " << gl::FmtHR(hr); |
| release(); |
| return EGL_BAD_ALLOC; |
| } |
| |
| hr = mSwapChain->ResizeBuffers(desc.BufferCount, backbufferWidth, backbufferHeight, |
| getSwapChainNativeFormat(), 0); |
| |
| if (FAILED(hr)) |
| { |
| ERR() << "Error resizing swap chain buffers, " << gl::FmtHR(hr); |
| release(); |
| |
| if (d3d11::isDeviceLostError(hr)) |
| { |
| HRESULT reason = device->GetDeviceRemovedReason(); |
| ERR() << "Device lost in SwapChain11::resize " << gl::FmtHR(hr) |
| << ", reason: " << gl::FmtHR(reason); |
| return EGL_CONTEXT_LOST; |
| } |
| else |
| { |
| return EGL_BAD_ALLOC; |
| } |
| } |
| |
| ID3D11Texture2D *backbufferTexture = nullptr; |
| hr = mSwapChain->GetBuffer(0, __uuidof(ID3D11Texture2D), |
| reinterpret_cast<void **>(&backbufferTexture)); |
| ASSERT(SUCCEEDED(hr)); |
| if (SUCCEEDED(hr)) |
| { |
| const auto &format = |
| d3d11::Format::Get(mOffscreenRenderTargetFormat, mRenderer->getRenderer11DeviceCaps()); |
| mBackBufferTexture.set(backbufferTexture, format); |
| mBackBufferTexture.setInternalName("BackBufferTexture"); |
| |
| angle::Result result = mRenderer->allocateResourceNoDesc( |
| displayD3D, mBackBufferTexture.get(), &mBackBufferRTView); |
| ASSERT(result != angle::Result::Stop); |
| mBackBufferRTView.setInternalName("BackBufferRTV"); |
| |
| result = mRenderer->allocateResourceNoDesc(displayD3D, mBackBufferTexture.get(), |
| &mBackBufferSRView); |
| ASSERT(result != angle::Result::Stop); |
| mBackBufferSRView.setInternalName("BackBufferSRV"); |
| } |
| |
| mFirstSwap = true; |
| |
| return resetOffscreenBuffers(displayD3D, backbufferWidth, backbufferHeight); |
| } |
| |
| DXGI_FORMAT SwapChain11::getSwapChainNativeFormat() const |
| { |
| // Return a render target format for offscreen rendering is supported by IDXGISwapChain. |
| // MSDN https://msdn.microsoft.com/en-us/library/windows/desktop/bb173064(v=vs.85).aspx |
| switch (mOffscreenRenderTargetFormat) |
| { |
| case GL_RGBA8: |
| case GL_RGBA4: |
| case GL_RGB5_A1: |
| case GL_RGB8: |
| case GL_RGB565: |
| return DXGI_FORMAT_R8G8B8A8_UNORM; |
| |
| case GL_BGRA8_EXT: |
| return DXGI_FORMAT_B8G8R8A8_UNORM; |
| |
| case GL_RGB10_A2: |
| return DXGI_FORMAT_R10G10B10A2_UNORM; |
| |
| case GL_RGBA16F: |
| return DXGI_FORMAT_R16G16B16A16_FLOAT; |
| |
| default: |
| UNREACHABLE(); |
| return DXGI_FORMAT_UNKNOWN; |
| } |
| } |
| |
| EGLint SwapChain11::reset(DisplayD3D *displayD3D, |
| EGLint backbufferWidth, |
| EGLint backbufferHeight, |
| EGLint swapInterval) |
| { |
| mSwapInterval = static_cast<unsigned int>(swapInterval); |
| if (mSwapInterval > 4) |
| { |
| // IDXGISwapChain::Present documentation states that valid sync intervals are in the [0,4] |
| // range |
| return EGL_BAD_PARAMETER; |
| } |
| |
| // If the swap chain already exists, just resize |
| if (mSwapChain != nullptr) |
| { |
| return resize(displayD3D, backbufferWidth, backbufferHeight); |
| } |
| |
| ANGLE_TRACE_EVENT0("gpu.angle", "SwapChain11::reset"); |
| ID3D11Device *device = mRenderer->getDevice(); |
| |
| if (device == nullptr) |
| { |
| return EGL_BAD_ACCESS; |
| } |
| |
| // Release specific resources to free up memory for the new render target, while the |
| // old render target still exists for the purpose of preserving its contents. |
| SafeRelease(mSwapChain1); |
| SafeRelease(mSwapChain); |
| mBackBufferTexture.reset(); |
| mBackBufferRTView.reset(); |
| |
| // EGL allows creating a surface with 0x0 dimension, however, DXGI does not like 0x0 swapchains |
| if (backbufferWidth < 1 || backbufferHeight < 1) |
| { |
| releaseOffscreenColorBuffer(); |
| return EGL_SUCCESS; |
| } |
| |
| if (mNativeWindow->getNativeWindow()) |
| { |
| HRESULT hr = mNativeWindow->createSwapChain( |
| device, mRenderer->getDxgiFactory(), getSwapChainNativeFormat(), backbufferWidth, |
| backbufferHeight, mNeedsOffscreenTexture ? 1 : getD3DSamples(), &mSwapChain); |
| |
| if (FAILED(hr)) |
| { |
| ERR() << "Could not create additional swap chains or offscreen surfaces, " |
| << gl::FmtHR(hr); |
| release(); |
| |
| if (d3d11::isDeviceLostError(hr)) |
| { |
| HRESULT reason = device->GetDeviceRemovedReason(); |
| ERR() << "Device lost in SwapChain11::reset " << gl::FmtHR(hr) |
| << ", reason: " << gl::FmtHR(reason); |
| return EGL_CONTEXT_LOST; |
| } |
| else |
| { |
| return EGL_BAD_ALLOC; |
| } |
| } |
| |
| if (mRenderer->getRenderer11DeviceCaps().supportsDXGI1_2) |
| { |
| mSwapChain1 = d3d11::DynamicCastComObject<IDXGISwapChain1>(mSwapChain); |
| } |
| |
| ID3D11Texture2D *backbufferTex = nullptr; |
| hr = mSwapChain->GetBuffer(0, __uuidof(ID3D11Texture2D), |
| reinterpret_cast<LPVOID *>(&backbufferTex)); |
| ASSERT(SUCCEEDED(hr)); |
| const auto &format = |
| d3d11::Format::Get(mOffscreenRenderTargetFormat, mRenderer->getRenderer11DeviceCaps()); |
| mBackBufferTexture.set(backbufferTex, format); |
| mBackBufferTexture.setInternalName("BackBufferTexture"); |
| |
| angle::Result result = mRenderer->allocateResourceNoDesc( |
| displayD3D, mBackBufferTexture.get(), &mBackBufferRTView); |
| ASSERT(result != angle::Result::Stop); |
| mBackBufferRTView.setInternalName("BackBufferRTV"); |
| |
| result = mRenderer->allocateResourceNoDesc(displayD3D, mBackBufferTexture.get(), |
| &mBackBufferSRView); |
| ASSERT(result != angle::Result::Stop); |
| mBackBufferSRView.setInternalName("BackBufferSRV"); |
| } |
| |
| mFirstSwap = true; |
| |
| return resetOffscreenBuffers(displayD3D, backbufferWidth, backbufferHeight); |
| } |
| |
| angle::Result SwapChain11::initPassThroughResources(DisplayD3D *displayD3D) |
| { |
| if (mPassThroughResourcesInit) |
| { |
| return angle::Result::Continue; |
| } |
| |
| ANGLE_TRACE_EVENT0("gpu.angle", "SwapChain11::initPassThroughResources"); |
| ID3D11Device *device = mRenderer->getDevice(); |
| |
| ASSERT(device != nullptr); |
| |
| // Make sure our resources are all not allocated, when we create |
| ASSERT(!mQuadVB.valid() && !mPassThroughSampler.valid()); |
| ASSERT(!mPassThroughIL.valid() && !mPassThroughVS.valid() && !mPassThroughOrResolvePS.valid()); |
| |
| D3D11_BUFFER_DESC vbDesc; |
| vbDesc.ByteWidth = sizeof(d3d11::PositionTexCoordVertex) * 4; |
| vbDesc.Usage = D3D11_USAGE_DYNAMIC; |
| vbDesc.BindFlags = D3D11_BIND_VERTEX_BUFFER; |
| vbDesc.CPUAccessFlags = D3D11_CPU_ACCESS_WRITE; |
| vbDesc.MiscFlags = 0; |
| vbDesc.StructureByteStride = 0; |
| |
| ANGLE_TRY(mRenderer->allocateResource(displayD3D, vbDesc, &mQuadVB)); |
| mQuadVB.setInternalName("SwapChainQuadVB"); |
| |
| D3D11_SAMPLER_DESC samplerDesc; |
| samplerDesc.Filter = D3D11_FILTER_MIN_MAG_MIP_POINT; |
| samplerDesc.AddressU = D3D11_TEXTURE_ADDRESS_CLAMP; |
| samplerDesc.AddressV = D3D11_TEXTURE_ADDRESS_CLAMP; |
| samplerDesc.AddressW = D3D11_TEXTURE_ADDRESS_CLAMP; |
| samplerDesc.MipLODBias = 0.0f; |
| samplerDesc.MaxAnisotropy = 0; |
| samplerDesc.ComparisonFunc = D3D11_COMPARISON_NEVER; |
| samplerDesc.BorderColor[0] = 0.0f; |
| samplerDesc.BorderColor[1] = 0.0f; |
| samplerDesc.BorderColor[2] = 0.0f; |
| samplerDesc.BorderColor[3] = 0.0f; |
| samplerDesc.MinLOD = 0; |
| samplerDesc.MaxLOD = D3D11_FLOAT32_MAX; |
| |
| ANGLE_TRY(mRenderer->allocateResource(displayD3D, samplerDesc, &mPassThroughSampler)); |
| mPassThroughSampler.setInternalName("SwapChainPassThroughSampler"); |
| |
| D3D11_INPUT_ELEMENT_DESC quadLayout[] = { |
| {"POSITION", 0, DXGI_FORMAT_R32G32_FLOAT, 0, 0, D3D11_INPUT_PER_VERTEX_DATA, 0}, |
| {"TEXCOORD", 0, DXGI_FORMAT_R32G32_FLOAT, 0, 8, D3D11_INPUT_PER_VERTEX_DATA, 0}, |
| }; |
| |
| InputElementArray quadElements(quadLayout); |
| ShaderData vertexShaderData(g_VS_Passthrough2D); |
| |
| ANGLE_TRY( |
| mRenderer->allocateResource(displayD3D, quadElements, &vertexShaderData, &mPassThroughIL)); |
| mPassThroughIL.setInternalName("SwapChainPassThroughIL"); |
| |
| ANGLE_TRY(mRenderer->allocateResource(displayD3D, vertexShaderData, &mPassThroughVS)); |
| mPassThroughVS.setInternalName("SwapChainPassThroughVS"); |
| |
| if (mEGLSamples <= 1) |
| { |
| ShaderData pixelShaderData(g_PS_PassthroughRGBA2D); |
| ANGLE_TRY( |
| mRenderer->allocateResource(displayD3D, pixelShaderData, &mPassThroughOrResolvePS)); |
| } |
| else |
| { |
| if (mNativeWindow->getNativeWindow() && mNeedsOffscreenTexture) |
| { |
| ShaderData pixelShaderData(g_PS_ResolveColor2D); |
| ANGLE_TRY( |
| mRenderer->allocateResource(displayD3D, pixelShaderData, &mPassThroughOrResolvePS)); |
| } |
| else |
| { |
| ShaderData pixelShaderData(g_PS_PassthroughRGBA2DMS); |
| ANGLE_TRY( |
| mRenderer->allocateResource(displayD3D, pixelShaderData, &mPassThroughOrResolvePS)); |
| } |
| } |
| |
| mPassThroughOrResolvePS.setInternalName("SwapChainPassThroughPS"); |
| |
| // Use the default rasterizer state but without culling |
| D3D11_RASTERIZER_DESC rasterizerDesc; |
| rasterizerDesc.FillMode = D3D11_FILL_SOLID; |
| rasterizerDesc.CullMode = D3D11_CULL_NONE; |
| rasterizerDesc.FrontCounterClockwise = FALSE; |
| rasterizerDesc.DepthBias = 0; |
| rasterizerDesc.SlopeScaledDepthBias = 0.0f; |
| rasterizerDesc.DepthBiasClamp = 0.0f; |
| rasterizerDesc.DepthClipEnable = TRUE; |
| rasterizerDesc.ScissorEnable = FALSE; |
| rasterizerDesc.MultisampleEnable = FALSE; |
| rasterizerDesc.AntialiasedLineEnable = FALSE; |
| |
| ANGLE_TRY(mRenderer->allocateResource(displayD3D, rasterizerDesc, &mPassThroughRS)); |
| mPassThroughRS.setInternalName("SwapChainPassThroughRasterizerState"); |
| |
| mPassThroughResourcesInit = true; |
| return angle::Result::Continue; |
| } |
| |
| // parameters should be validated/clamped by caller |
| EGLint SwapChain11::swapRect(DisplayD3D *displayD3D, |
| EGLint x, |
| EGLint y, |
| EGLint width, |
| EGLint height) |
| { |
| if (mNeedsOffscreenTexture) |
| { |
| EGLint result = copyOffscreenToBackbuffer(displayD3D, x, y, width, height); |
| if (result != EGL_SUCCESS) |
| { |
| return result; |
| } |
| } |
| |
| EGLint result = present(displayD3D, x, y, width, height); |
| if (result != EGL_SUCCESS) |
| { |
| return result; |
| } |
| |
| mRenderer->onSwap(); |
| |
| return EGL_SUCCESS; |
| } |
| |
| EGLint SwapChain11::copyOffscreenToBackbuffer(DisplayD3D *displayD3D, |
| EGLint x, |
| EGLint y, |
| EGLint width, |
| EGLint height) |
| { |
| if (!mSwapChain) |
| { |
| return EGL_SUCCESS; |
| } |
| |
| if (initPassThroughResources(displayD3D) == angle::Result::Stop) |
| { |
| return EGL_BAD_ALLOC; |
| } |
| |
| ID3D11DeviceContext *deviceContext = mRenderer->getDeviceContext(); |
| |
| // Set vertices |
| D3D11_MAPPED_SUBRESOURCE mappedResource; |
| HRESULT result = |
| deviceContext->Map(mQuadVB.get(), 0, D3D11_MAP_WRITE_DISCARD, 0, &mappedResource); |
| if (FAILED(result)) |
| { |
| return EGL_BAD_ACCESS; |
| } |
| |
| d3d11::PositionTexCoordVertex *vertices = |
| static_cast<d3d11::PositionTexCoordVertex *>(mappedResource.pData); |
| |
| // Create a quad in homogeneous coordinates |
| float x1 = (x / float(mWidth)) * 2.0f - 1.0f; |
| float y1 = (y / float(mHeight)) * 2.0f - 1.0f; |
| float x2 = ((x + width) / float(mWidth)) * 2.0f - 1.0f; |
| float y2 = ((y + height) / float(mHeight)) * 2.0f - 1.0f; |
| |
| float u1 = x / float(mWidth); |
| float v1 = y / float(mHeight); |
| float u2 = (x + width) / float(mWidth); |
| float v2 = (y + height) / float(mHeight); |
| |
| // Invert the quad vertices depending on the surface orientation. |
| if ((mOrientation & EGL_SURFACE_ORIENTATION_INVERT_X_ANGLE) != 0) |
| { |
| std::swap(x1, x2); |
| } |
| if ((mOrientation & EGL_SURFACE_ORIENTATION_INVERT_Y_ANGLE) != 0) |
| { |
| std::swap(y1, y2); |
| } |
| |
| d3d11::SetPositionTexCoordVertex(&vertices[0], x1, y1, u1, v1); |
| d3d11::SetPositionTexCoordVertex(&vertices[1], x1, y2, u1, v2); |
| d3d11::SetPositionTexCoordVertex(&vertices[2], x2, y1, u2, v1); |
| d3d11::SetPositionTexCoordVertex(&vertices[3], x2, y2, u2, v2); |
| |
| deviceContext->Unmap(mQuadVB.get(), 0); |
| |
| StateManager11 *stateManager = mRenderer->getStateManager(); |
| |
| constexpr UINT stride = sizeof(d3d11::PositionTexCoordVertex); |
| stateManager->setSingleVertexBuffer(&mQuadVB, stride, 0); |
| |
| // Apply state |
| stateManager->setDepthStencilState(nullptr, 0xFFFFFFFF); |
| stateManager->setSimpleBlendState(nullptr); |
| stateManager->setRasterizerState(&mPassThroughRS); |
| |
| // Apply shaders |
| stateManager->setInputLayout(&mPassThroughIL); |
| stateManager->setPrimitiveTopology(D3D_PRIMITIVE_TOPOLOGY_TRIANGLESTRIP); |
| stateManager->setDrawShaders(&mPassThroughVS, nullptr, &mPassThroughOrResolvePS); |
| |
| // Apply render targets. Use the proxy context in display. |
| stateManager->setRenderTarget(mBackBufferRTView.get(), nullptr); |
| |
| // Set the viewport |
| stateManager->setSimpleViewport(mWidth, mHeight); |
| |
| // Apply textures |
| stateManager->setSimplePixelTextureAndSampler(mOffscreenSRView, mPassThroughSampler); |
| |
| // Draw |
| deviceContext->Draw(4, 0); |
| |
| return EGL_SUCCESS; |
| } |
| |
| EGLint SwapChain11::present(DisplayD3D *displayD3D, EGLint x, EGLint y, EGLint width, EGLint height) |
| { |
| if (!mSwapChain) |
| { |
| return EGL_SUCCESS; |
| } |
| |
| UINT swapInterval = mSwapInterval; |
| #if ANGLE_VSYNC == ANGLE_DISABLED |
| swapInterval = 0; |
| #endif |
| |
| HRESULT result = S_OK; |
| |
| // Use IDXGISwapChain1::Present1 with a dirty rect if DXGI 1.2 is available. |
| // Dirty rect present is not supported with a multisampled swapchain. |
| if (mSwapChain1 != nullptr && mEGLSamples <= 1) |
| { |
| if (mFirstSwap) |
| { |
| // Can't swap with a dirty rect if this swap chain has never swapped before |
| DXGI_PRESENT_PARAMETERS params = {0, nullptr, nullptr, nullptr}; |
| result = mSwapChain1->Present1(swapInterval, 0, ¶ms); |
| } |
| else |
| { |
| RECT rect = {static_cast<LONG>(x), static_cast<LONG>(mHeight - y - height), |
| static_cast<LONG>(x + width), static_cast<LONG>(mHeight - y)}; |
| DXGI_PRESENT_PARAMETERS params = {1, &rect, nullptr, nullptr}; |
| result = mSwapChain1->Present1(swapInterval, 0, ¶ms); |
| } |
| } |
| else |
| { |
| result = mSwapChain->Present(swapInterval, 0); |
| } |
| |
| mFirstSwap = false; |
| |
| // Some swapping mechanisms such as DXGI_SWAP_EFFECT_FLIP_SEQUENTIAL unbind the current render |
| // target. Mark it dirty. Use the proxy context in display since there is none available. |
| mRenderer->getStateManager()->invalidateRenderTarget(); |
| |
| if (result == DXGI_ERROR_DEVICE_REMOVED) |
| { |
| ERR() << "Present failed: the D3D11 device was removed, " |
| << gl::FmtHR(mRenderer->getDevice()->GetDeviceRemovedReason()); |
| return EGL_CONTEXT_LOST; |
| } |
| else if (result == DXGI_ERROR_DEVICE_RESET) |
| { |
| ERR() << "Present failed: the D3D11 device was reset from a bad command."; |
| return EGL_CONTEXT_LOST; |
| } |
| else if (FAILED(result)) |
| { |
| ERR() << "Present failed with " << gl::FmtHR(result); |
| } |
| |
| mNativeWindow->commitChange(); |
| |
| return EGL_SUCCESS; |
| } |
| |
| const TextureHelper11 &SwapChain11::getOffscreenTexture() |
| { |
| return mNeedsOffscreenTexture ? mOffscreenTexture : mBackBufferTexture; |
| } |
| |
| const d3d11::RenderTargetView &SwapChain11::getRenderTarget() |
| { |
| return mNeedsOffscreenTexture ? mOffscreenRTView : mBackBufferRTView; |
| } |
| |
| const d3d11::SharedSRV &SwapChain11::getRenderTargetShaderResource(d3d::Context *context) |
| { |
| if (!mNeedsOffscreenTexture) |
| { |
| ASSERT(mBackBufferSRView.valid()); |
| return mBackBufferSRView; |
| } |
| |
| if (!mNeedsOffscreenTextureCopy) |
| { |
| ASSERT(mOffscreenSRView.valid()); |
| return mOffscreenSRView; |
| } |
| |
| if (!mOffscreenTextureCopyForSRV.valid()) |
| { |
| const d3d11::Format &backbufferFormatInfo = |
| d3d11::Format::Get(mOffscreenRenderTargetFormat, mRenderer->getRenderer11DeviceCaps()); |
| |
| D3D11_TEXTURE2D_DESC offscreenCopyDesc; |
| mOffscreenTexture.getDesc(&offscreenCopyDesc); |
| |
| offscreenCopyDesc.BindFlags = D3D11_BIND_SHADER_RESOURCE; |
| offscreenCopyDesc.MiscFlags = 0; |
| offscreenCopyDesc.CPUAccessFlags = 0; |
| angle::Result result = mRenderer->allocateTexture( |
| context, offscreenCopyDesc, backbufferFormatInfo, &mOffscreenTextureCopyForSRV); |
| ASSERT(result != angle::Result::Stop); |
| mOffscreenTextureCopyForSRV.setInternalName("OffscreenBackBufferCopyForSRV"); |
| |
| D3D11_SHADER_RESOURCE_VIEW_DESC offscreenSRVDesc; |
| offscreenSRVDesc.Format = backbufferFormatInfo.srvFormat; |
| offscreenSRVDesc.ViewDimension = |
| (mEGLSamples <= 1) ? D3D11_SRV_DIMENSION_TEXTURE2D : D3D11_SRV_DIMENSION_TEXTURE2DMS; |
| offscreenSRVDesc.Texture2D.MostDetailedMip = 0; |
| offscreenSRVDesc.Texture2D.MipLevels = static_cast<UINT>(-1); |
| |
| result = mRenderer->allocateResource(context, offscreenSRVDesc, |
| mOffscreenTextureCopyForSRV.get(), &mOffscreenSRView); |
| ASSERT(result != angle::Result::Stop); |
| mOffscreenSRView.setInternalName("OffscreenBackBufferSRV"); |
| } |
| |
| // Need to copy the offscreen texture into the shader-readable copy, since it's external and |
| // we don't know if the copy is up-to-date. This works around the problem we have when the app |
| // passes in a texture that isn't shader-readable. |
| mRenderer->getDeviceContext()->CopyResource(mOffscreenTextureCopyForSRV.get(), |
| mOffscreenTexture.get()); |
| return mOffscreenSRView; |
| } |
| |
| const d3d11::DepthStencilView &SwapChain11::getDepthStencil() |
| { |
| return mDepthStencilDSView; |
| } |
| |
| const d3d11::SharedSRV &SwapChain11::getDepthStencilShaderResource() |
| { |
| return mDepthStencilSRView; |
| } |
| |
| const TextureHelper11 &SwapChain11::getDepthStencilTexture() |
| { |
| return mDepthStencilTexture; |
| } |
| |
| void *SwapChain11::getKeyedMutex() |
| { |
| return mKeyedMutex; |
| } |
| |
| void SwapChain11::recreate() |
| { |
| // possibly should use this method instead of reset |
| } |
| |
| RenderTargetD3D *SwapChain11::getColorRenderTarget() |
| { |
| return &mColorRenderTarget; |
| } |
| |
| RenderTargetD3D *SwapChain11::getDepthStencilRenderTarget() |
| { |
| return &mDepthStencilRenderTarget; |
| } |
| |
| egl::Error SwapChain11::getSyncValues(EGLuint64KHR *ust, EGLuint64KHR *msc, EGLuint64KHR *sbc) |
| { |
| if (!mSwapChain) |
| { |
| return egl::EglNotInitialized() << "Swap chain uninitialized"; |
| } |
| |
| DXGI_FRAME_STATISTICS stats = {}; |
| HRESULT result = mSwapChain->GetFrameStatistics(&stats); |
| |
| if (FAILED(result)) |
| { |
| return egl::EglBadAlloc() << "Failed to get frame statistics, " << gl::FmtHR(result); |
| } |
| |
| // Conversion from DXGI_FRAME_STATISTICS to the output values: |
| // stats.SyncRefreshCount -> msc |
| // stats.PresentCount -> sbc |
| // stats.SyncQPCTime -> ust with conversion to microseconds via QueryPerformanceFrequency |
| *msc = stats.SyncRefreshCount; |
| *sbc = stats.PresentCount; |
| |
| LONGLONG syncQPCValue = stats.SyncQPCTime.QuadPart; |
| // If the QPC Value is below the overflow threshold, we proceed with |
| // simple multiply and divide. |
| if (syncQPCValue < kQPCOverflowThreshold) |
| { |
| *ust = syncQPCValue * kMicrosecondsPerSecond / mQPCFrequency; |
| } |
| else |
| { |
| // Otherwise, calculate microseconds in a round about manner to avoid |
| // overflow and precision issues. |
| int64_t wholeSeconds = syncQPCValue / mQPCFrequency; |
| int64_t leftoverTicks = syncQPCValue - (wholeSeconds * mQPCFrequency); |
| *ust = wholeSeconds * kMicrosecondsPerSecond + |
| leftoverTicks * kMicrosecondsPerSecond / mQPCFrequency; |
| } |
| |
| return egl::NoError(); |
| } |
| |
| UINT SwapChain11::getD3DSamples() const |
| { |
| return (mEGLSamples == 0) ? 1 : mEGLSamples; |
| } |
| |
| } // namespace rx |