There are many ways to debug ANGLE using generic or platform-dependent tools. Here is a list of tips on how to use them.
Apitrace captures traces of OpenGL commands for later analysis, allowing us to see how ANGLE translates OpenGL ES commands. In order to capture the trace, it inserts a driver shim using LD_PRELOAD that records the command and then forwards it to the OpenGL driver.
The problem with ANGLE is that it exposes the same symbols as the OpenGL driver so apitrace captures the entry point calls intended for ANGLE and reroutes them to the OpenGL driver. In order to avoid this problem, use the following:
export TRACE_LIBGL=/usr/lib/libGL.so.1. You can find your libGL with ldconfig -p | grep libGL.angle_link_glx = true.If you follow these steps, apitrace will work correctly aside from a few minor bugs like not being able to figure out what the default framebuffer size is if there is no glViewport command.
For example, to trace a run of hello_triangle, assuming the apitrace executables are in $PATH:
gn args out/Debug # add "angle_link_glx = true" # edit samples/BUILD.gn and append "_static" to "angle_util", "libEGL", "libGLESv2" ninja -C out/Debug export TRACE_LIBGL="/usr/lib/libGL.so.1" # may require a different path apitrace trace -o mytrace ./out/Debug/hello_triangle qapitrace mytrace
Normally, ANGLE only logs errors and warnings (e.g. to Android logcat). General logging, or additional levels of “trace” messages will be logged when the following GN arg is set:
angle_enable_trace = true
Android is built as an Android APK, which makes it more difficult to debug an APK that is using ANGLE. The following information can allow you to debug ANGLE with LLDB.
is_component_build = false is_debug = true is_official_build = false symbol_level = 2 strip_debug_info = false ignore_elf32_limitations = true angle_extract_native_libs = true
The following local patch may also be necessary:
diff --git a/build/config/compiler/compiler.gni b/build/config/compiler/compiler.gni
index 96a18d91a3f6..ca7971fdfd48 100644
--- a/build/config/compiler/compiler.gni
+++ b/build/config/compiler/compiler.gni
@@ -86,7 +86,8 @@ declare_args() {
# Whether an error should be raised on attempts to make debug builds with
# is_component_build=false. Very large debug symbols can have unwanted side
# effects so this is enforced by default for chromium.
- forbid_non_component_debug_builds = build_with_chromium
+ forbid_non_component_debug_builds = false
Build/install/enable ANGLE apk for your application following other instructions.
diff --git a/scripts/gdbclient.py b/scripts/gdbclient.py
index 61fac4000..1f43f4f64 100755
--- a/scripts/gdbclient.py
+++ b/scripts/gdbclient.py
@@ -395,6 +395,8 @@ def generate_setup_script(debugger_path, sysroot, linker_search_dir, binary_file
vendor_paths = ["", "hw", "egl"]
solib_search_path += [os.path.join(symbols_dir, x) for x in symbols_paths]
solib_search_path += [os.path.join(vendor_dir, x) for x in vendor_paths]
+ solib_search_path += ["/your_path_to_chromium_src/out/Debug/lib.unstripped/"]
if linker_search_dir is not None:
solib_search_path += [linker_search_dir]
/your_path_to_chromium_src/out/Debug folder. This adds the ANGLE source-file paths to what is visible to LLDB, which allows LLDB to show ANGLE's source files. Refer to https://source.android.com/devices/tech/debug/gdb for how to attach the app for debugging.--shard-timeout 100000000 to disable the timeout so that the test won‘t get killed while you are debugging. If the test runs too fast that you don’t have time to attach, use --delay-test-start=60 to give you extra time to attach.ANGLE can emit debug-utils markers for every GLES API command that are visible to both Android GPU Inspector (AGI) and RenderDoc. This support requires enabling general logging as well as setting the following additional GN arg:
angle_enable_annotator_run_time_checks = true
In addition, if the following GN arg is set, the API calls will output to Android's logcat:
angle_enable_trace_android_logcat = true
Once compiled, the markers need to be turned on.
On Android, debug markers are turned on and off with an Android debug property that is automatically deleted at the next reboot:
adb shell setprop debug.angle.markers 1
On desktop, debug markers are turned on and off with the ANGLE_ENABLE_DEBUG_MARKERS environment variable (set in OS-specific manner):
GAPID can be used to capture trace of Vulkan commands on Linux. When capturing traces of gtest based tests built inside Chromium checkout, make sure to run the tests with --single-process-tests argument.
GAPID can be used to capture a trace of the Vulkan or OpenGL ES command stream on Android. For it to work, ANGLE's libraries must have different names from the system OpenGL libraries. This is done with the gn arg:
angle_libs_suffix = "_ANGLE_DEV"
All AngleNativeTest based tests share the same activity name, com.android.angle.test.AngleUnitTestActivity. Thus, prior to capturing your test trace, the specific test APK must be installed on the device. When you build the test, a test launcher is generated, for example, ./out/Release/bin/run_angle_end2end_tests. The best way to install the APK is to run this test launcher once.
In GAPID's “Capture Trace” dialog, “Package / Action:” should be:
android.intent.action.MAIN:com.android.angle.test/com.android.angle.test.AngleUnitTestActivity
The mandatory extra intent argument for starting the activity is org.chromium.native_test.NativeTest.StdoutFile. Without it the test APK crashes. Test filters can be specified via either the org.chromium.native_test.NativeTest.CommandLineFlags or the org.chromium.native_test.NativeTest.GtestFilter argument. Example “Intent Arguments:” values in GAPID's “Capture Trace” dialog:
-e org.chromium.native_test.NativeTest.StdoutFile /sdcard/chromium_tests_root/out.txt -e org.chromium.native_test.NativeTest.CommandLineFlags "--gtest_filter=*ES2_VULKAN"
or
-e org.chromium.native_test.NativeTest.StdoutFile /sdcard/chromium_tests_root/out.txt --e org.chromium.native_test.NativeTest.GtestFilter RendererTest.SimpleOperation/ES2_VULKAN:SimpleOperationTest.DrawWithTexture/ES2_VULKAN
An application running through ANGLE can confuse RenderDoc, as RenderDoc hooks to EGL and ends up tracing the calls the application makes, instead of the calls ANGLE makes to its backend. As ANGLE is a special case, there's little support for it by RenderDoc, though there are workarounds.
On Windows, RenderDoc supports setting the environment variable RENDERDOC_HOOK_EGL to 0 to avoid this issue.
On Linux, there is no supported workaround by RenderDoc. See this issue. To capture Vulkan traces, the workaround is to build RenderDoc without GL(ES) support.
Building RenderDoc is straightforward. However, here are a few instructions to keep in mind.
# Install dependencies based on RenderDoc document. Here are some packages that are unlikely to be already installed: $ sudo apt install libxcb-keysyms1-dev python3-dev qt5-qmake libqt5svg5-dev libqt5x11extras5-dev # Inside the RenderDoc directory: $ cmake -DCMAKE_BUILD_TYPE=Release -Bbuild -H. -DENABLE_GLES=OFF -DENABLE_GL=OFF # QT_SELECT=5 is necessary if your distribution doesn't default to Qt5 $ QT_SELECT=5 make -j -C build # Run RenderDoc from the build directory: $ ./build/bin/qrenderdoc
If your distribution does not provide a recent Vulkan SDK package, you would need to manually install that. This script tries to perform this installation as safely as possible. It would overwrite the system package's files, so follow at your own risk. Place this script just above the extracted SDK directory.
#! /bin/bash if [ $# -lt 1 ]; then echo "Usage: $0 <version>" exit 1 fi ver=$1 if [ ! -d "$ver" ]; then echo "$ver is not a directory" fi # Verify everything first echo "Verifying files..." echo "$ver"/x86_64/bin/vulkaninfo test -f "$ver"/x86_64/bin/vulkaninfo || exit 1 echo "$ver"/x86_64/etc/explicit_layer.d/ test -d "$ver"/x86_64/etc/explicit_layer.d || exit 1 echo "$ver"/x86_64/lib/ test -d "$ver"/x86_64/lib || exit 1 echo "Verified. Performing copy..." echo sudo cp "$ver"/x86_64/bin/vulkaninfo /usr/bin/vulkaninfo sudo cp "$ver"/x86_64/bin/vulkaninfo /usr/bin/vulkaninfo echo sudo cp "$ver"/x86_64/etc/explicit_layer.d/* /etc/explicit_layer.d/ sudo cp "$ver"/x86_64/etc/explicit_layer.d/* /etc/explicit_layer.d/ echo sudo rm /usr/lib/x86_64-linux-gnu/libvulkan.so* sudo rm /usr/lib/x86_64-linux-gnu/libvulkan.so* echo sudo cp -P "$ver"/x86_64/lib/lib* /usr/lib/x86_64-linux-gnu/ sudo cp -P "$ver"/x86_64/lib/lib* /usr/lib/x86_64-linux-gnu/ echo "Done."
If you are on Linux, make sure not to use the build done in the previous section. The GL renderer disabled in the previous section is actually needed in this section.
Define the following environment variables, for example in .bashrc (values are examples):
export JAVA_HOME=/usr/local/buildtools/java/jdk export ANDROID_SDK=$HOME/chromium/src/third_party/android_sdk/public export ANDROID_NDK=$HOME/chromium/src/third_party/android_ndk export ANDROID_NDK_HOME=$HOME/chromium/src/third_party/android_ndk
In the renderdoc directory, create Android builds of RenderDoc:
mkdir build-android-arm32 cd build-android-arm32/ cmake -DBUILD_ANDROID=On -DANDROID_ABI=armeabi-v7a .. make -j cd ../ mkdir build-android-arm64 cd build-android-arm64/ cmake -DBUILD_ANDROID=On -DANDROID_ABI=arm64-v8a .. make -j cd ../
Note that you need both arm32 and arm64 builds even if working with an arm64 device. See RenderDoc's documentation for more information.
When you run RenderDoc, choose the “Replay Context” from the bottom-left part of the UI (defaults to Local). When selecting the device, you should see the RenderDoc application running.
In ANGLE itself, make sure you add a suffix for its names to be different from the system's. Add this to gn args:
angle_libs_suffix = "_ANGLE_DEV"
Next, you need to install an ANGLE test apk. When you build the test, a test launcher is generated, for example, ./out/Release/bin/run_angle_end2end_tests. The best way to install the APK is to run this test launcher once.
In RenderDoc, use com.android.angle.test/com.android.angle.test.AngleUnitTestActivity as the Executable Path, and provide the following arguments:
-e org.chromium.native_test.NativeTest.StdoutFile /sdcard/chromium_tests_root/out.txt -e org.chromium.native_test.NativeTest.CommandLineFlags "--gtest_filter=*ES2_VULKAN"
Note that in the above, only a single command line argument is supported with RenderDoc. If testing dEQP on a non-default platform, the easiest way would be to modify GetDefaultAPIName() in src/tests/deqp_support/angle_deqp_gtest.cpp (and avoid --use-angle=X).
Many of ANGLE's OpenGL ES entry points are exposed in Chromium as WebGL 1.0 and WebGL 2.0 APIs that are available via JavaScript. For testing purposes, custom ANGLE builds may be injected in Chrome Canary.
python scripts\update_chrome_angle.py to replace Canary's ANGLE with your custom ANGLE (note: Canary must be closed)./opt/google/chrome-unstable.is_component_build = false is suggested in the GN args.python scripts/update_chrome_angle.py to replace Dev's ANGLE with your custom ANGLELD_LIBRARY_PATH environment variable.% xattr -cr /Applications/Google\ Chrome\ Canary.app
% cp angle/out/Release/{libEGL.dylib,libGLESv2.dylib} /Applications/Google\ Chrome\ Canary.app/Contents/Frameworks/Google\ Chrome\ Framework.framework/Libraries
% codesign --force --sign - --deep /Applications/Google\ Chrome\ Canary.app
Run Chrome:
%LOCALAPPDATA%\Google\Chrome SxS\chrome.exe/opt/google/chrome-unstable/google-chrome-unstable./Google\ Chrome\ Canary.app/Contents/MacOS/Google\ Chrome\ CanaryWith the following command-line options:
--use-cmd-decoder=passthrough --use-gl=angle and one of--use-angle=d3d9 (Direct3D 9 renderer, Windows only)--use-angle=d3d11 (Direct3D 11 renderer, Windows only)--use-angle=d3d11on12 (Direct3D 11on12 renderer, Windows only)--use-angle=gl (OpenGL renderer)--use-angle=gles (OpenGL ES renderer)--use-angle=vulkan (Vulkan renderer)--use-angle=swiftshader (SwiftShader renderer)--use-angle=metal (Metal renderer, macOS only)Additional useful options:
--enable-logging: To see logs--disable-gpu-watchdog: To disable Chromium's watchdog, killing the GPU process when slow (due to a debug build for example)--disable-gpu-sandbox: To disable Chromium‘s sandboxing features, if it’s getting in the way of testing.--disable-gpu-compositing: To make sure only the WebGL test being debugged is run through ANGLE, not the entirety of Chromium.