| # Copyright (C) 2005-2007, 2010-2016 Apple Inc. All rights reserved. |
| # Copyright (C) 2009 Google Inc. All rights reserved. |
| # Copyright (C) 2011 Research In Motion Limited. All rights reserved. |
| # Copyright (C) 2013 Nokia Corporation and/or its subsidiary(-ies). |
| # |
| # Redistribution and use in source and binary forms, with or without |
| # modification, are permitted provided that the following conditions |
| # are met: |
| # |
| # 1. Redistributions of source code must retain the above copyright |
| # notice, this list of conditions and the following disclaimer. |
| # 2. Redistributions in binary form must reproduce the above copyright |
| # notice, this list of conditions and the following disclaimer in the |
| # documentation and/or other materials provided with the distribution. |
| # 3. Neither the name of Apple Inc. ("Apple") nor the names of |
| # its contributors may be used to endorse or promote products derived |
| # from this software without specific prior written permission. |
| # |
| # THIS SOFTWARE IS PROVIDED BY APPLE AND ITS CONTRIBUTORS "AS IS" AND ANY |
| # EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED |
| # WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE |
| # DISCLAIMED. IN NO EVENT SHALL APPLE OR ITS CONTRIBUTORS BE LIABLE FOR ANY |
| # DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES |
| # (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; |
| # LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND |
| # ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT |
| # (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF |
| # THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| |
| # Module to share code to get to WebKit directories. |
| |
| use strict; |
| use version; |
| use warnings; |
| use Config; |
| use Cwd qw(realpath); |
| use Digest::MD5 qw(md5_hex); |
| use FindBin; |
| use File::Basename; |
| use File::Find; |
| use File::Path qw(make_path mkpath rmtree); |
| use File::Spec; |
| use File::Temp qw(tempdir); |
| use File::stat; |
| use List::Util; |
| use POSIX; |
| use Time::HiRes qw(usleep); |
| use VCSUtils; |
| |
| BEGIN { |
| use Exporter (); |
| our ($VERSION, @ISA, @EXPORT, @EXPORT_OK, %EXPORT_TAGS); |
| $VERSION = 1.00; |
| @ISA = qw(Exporter); |
| @EXPORT = qw( |
| &XcodeCoverageSupportOptions |
| &XcodeOptionString |
| &XcodeOptionStringNoConfig |
| &XcodeOptions |
| &XcodeStaticAnalyzerOption |
| &appDisplayNameFromBundle |
| &appendToEnvironmentVariableList |
| &archCommandLineArgumentsForRestrictedEnvironmentVariables |
| &availableXcodeSDKs |
| &baseProductDir |
| &chdirWebKit |
| &checkFrameworks |
| &cmakeArgsFromFeatures |
| ¤tSVNRevision |
| &debugSafari |
| &executableProductDir |
| &extractNonHostConfiguration |
| &findOrCreateSimulatorForIOSDevice |
| &iosSimulatorDeviceByName |
| &iosVersion |
| &nmPath |
| &passedConfiguration |
| &prependToEnvironmentVariableList |
| &printHelpAndExitForRunAndDebugWebKitAppIfNeeded |
| &productDir |
| &quitIOSSimulator |
| &relaunchIOSSimulator |
| &restartIOSSimulatorDevice |
| &runIOSWebKitApp |
| &runMacWebKitApp |
| &safariPath |
| &sdkDirectory |
| &sdkPlatformDirectory |
| &setConfiguration |
| &setupMacWebKitEnvironment |
| &setupUnixWebKitEnvironment |
| &sharedCommandLineOptions |
| &sharedCommandLineOptionsUsage |
| &shutDownIOSSimulatorDevice |
| &willUseIOSDeviceSDK |
| &willUseIOSSimulatorSDK |
| DO_NOT_USE_OPEN_COMMAND |
| SIMULATOR_DEVICE_SUFFIX_FOR_WEBKIT_DEVELOPMENT |
| USE_OPEN_COMMAND |
| ); |
| %EXPORT_TAGS = ( ); |
| @EXPORT_OK = (); |
| } |
| |
| # Ports |
| use constant { |
| AppleWin => "AppleWin", |
| FTW => "FTW", |
| GTK => "GTK", |
| iOS => "iOS", |
| tvOS => "tvOS", |
| watchOS => "watchOS", |
| Mac => "Mac", |
| MacCatalyst => "MacCatalyst", |
| JSCOnly => "JSCOnly", |
| PlayStation => "PlayStation", |
| WinCairo => "WinCairo", |
| WPE => "WPE", |
| Unknown => "Unknown" |
| }; |
| |
| use constant USE_OPEN_COMMAND => 1; # Used in runMacWebKitApp(). |
| use constant DO_NOT_USE_OPEN_COMMAND => 2; |
| use constant SIMULATOR_DEVICE_STATE_SHUTDOWN => "1"; |
| use constant SIMULATOR_DEVICE_STATE_BOOTED => "3"; |
| use constant SIMULATOR_DEVICE_SUFFIX_FOR_WEBKIT_DEVELOPMENT => "For WebKit Development"; |
| |
| # See table "Certificate types and names" on <https://developer.apple.com/library/ios/documentation/IDEs/Conceptual/AppDistributionGuide/MaintainingCertificates/MaintainingCertificates.html#//apple_ref/doc/uid/TP40012582-CH31-SW41>. |
| use constant IOS_DEVELOPMENT_CERTIFICATE_NAME_PREFIX => "iPhone Developer: "; |
| |
| our @EXPORT_OK; |
| |
| my $architecture; |
| my $asanIsEnabled; |
| my $ltoMode; |
| my $numberOfCPUs; |
| my $maxCPULoad; |
| my $baseProductDir; |
| my @baseProductDirOption; |
| my $configuration; |
| my $xcodeSDK; |
| my $configurationForVisualStudio; |
| my $configurationProductDir; |
| my $sourceDir; |
| my $currentSVNRevision; |
| my $didLoadIPhoneSimulatorNotification; |
| my $nmPath; |
| my $osXVersion; |
| my $iosVersion; |
| my $generateDsym; |
| my $isCMakeBuild; |
| my $isGenerateProjectOnly; |
| my $shouldBuild32Bit; |
| my $isWin64; |
| my $isInspectorFrontend; |
| my $portName; |
| my $shouldUseGuardMalloc; |
| my $shouldNotUseNinja; |
| my $xcodeVersion; |
| |
| my $unknownPortProhibited = 0; |
| |
| # Variables for Win32 support |
| my $programFilesPath; |
| my $msBuildPath; |
| my $vsInstallDir; |
| my $vsVersion; |
| my $windowsSourceDir; |
| my $winVersion; |
| |
| # Defined in VCSUtils. |
| sub exitStatus($); |
| |
| sub findMatchingArguments($$); |
| sub hasArgument($$); |
| |
| sub sdkDirectory($) |
| { |
| my ($sdkName) = @_; |
| chomp(my $sdkDirectory = `xcrun --sdk '$sdkName' --show-sdk-path`); |
| die "Failed to get SDK path from xcrun: $!" if exitStatus($?); |
| return $sdkDirectory; |
| } |
| |
| sub sdkPlatformDirectory($) |
| { |
| my ($sdkName) = @_; |
| chomp(my $sdkPlatformDirectory = `xcrun --sdk '$sdkName' --show-sdk-platform-path`); |
| die "Failed to get SDK platform path from xcrun: $!" if exitStatus($?); |
| return $sdkPlatformDirectory; |
| } |
| |
| sub determineSourceDir |
| { |
| return if $sourceDir; |
| $sourceDir = $FindBin::Bin; |
| $sourceDir =~ s|/+$||; # Remove trailing '/' as we would die later |
| |
| # walks up path checking each directory to see if it is the main WebKit project dir, |
| # defined by containing Sources, WebCore, and JavaScriptCore. |
| until ((-d File::Spec->catdir($sourceDir, "Source") && -d File::Spec->catdir($sourceDir, "Source", "WebCore") && -d File::Spec->catdir($sourceDir, "Source", "JavaScriptCore")) || (-d File::Spec->catdir($sourceDir, "Internal") && -d File::Spec->catdir($sourceDir, "OpenSource"))) |
| { |
| if ($sourceDir !~ s|/[^/]+$||) { |
| die "Could not find top level webkit directory above source directory using FindBin.\n"; |
| } |
| } |
| |
| $sourceDir = File::Spec->catdir($sourceDir, "OpenSource") if -d File::Spec->catdir($sourceDir, "OpenSource"); |
| } |
| |
| sub currentPerlPath() |
| { |
| my $thisPerl = $^X; |
| if ($^O ne 'VMS') { |
| $thisPerl .= $Config{_exe} unless $thisPerl =~ m/$Config{_exe}$/i; |
| } |
| return $thisPerl; |
| } |
| |
| # used for scripts which are stored in a non-standard location |
| sub setSourceDir($) |
| { |
| ($sourceDir) = @_; |
| } |
| |
| sub determineNinjaVersion |
| { |
| chomp(my $ninjaVersion = `ninja --version`); |
| return $ninjaVersion; |
| } |
| |
| sub determineXcodeVersion |
| { |
| return if defined $xcodeVersion; |
| my $xcodebuildVersionOutput = `xcodebuild -version`; |
| $xcodeVersion = ($xcodebuildVersionOutput =~ /Xcode ([0-9]+(\.[0-9]+)*)/) ? $1 : "3.0"; |
| } |
| |
| sub readXcodeUserDefault($) |
| { |
| my ($key) = @_; |
| |
| my $devnull = File::Spec->devnull(); |
| |
| my $value = `defaults read com.apple.dt.Xcode ${key} 2> ${devnull}`; |
| return if $?; |
| |
| chomp $value; |
| return $value; |
| } |
| |
| sub determineBaseProductDir |
| { |
| return if defined $baseProductDir; |
| determineSourceDir(); |
| |
| my $setSharedPrecompsDir; |
| my $indexDataStoreDir; |
| $baseProductDir = $ENV{"WEBKIT_OUTPUTDIR"}; |
| |
| if (!defined($baseProductDir) and isAppleCocoaWebKit()) { |
| # Silently remove ~/Library/Preferences/xcodebuild.plist which can |
| # cause build failure. The presence of |
| # ~/Library/Preferences/xcodebuild.plist can prevent xcodebuild from |
| # respecting global settings such as a custom build products directory |
| # (<rdar://problem/5585899>). |
| my $personalPlistFile = $ENV{HOME} . "/Library/Preferences/xcodebuild.plist"; |
| if (-e $personalPlistFile) { |
| unlink($personalPlistFile) || die "Could not delete $personalPlistFile: $!"; |
| } |
| |
| my $buildLocationStyle = join '', readXcodeUserDefault("IDEBuildLocationStyle"); |
| if ($buildLocationStyle eq "Custom") { |
| my $buildLocationType = join '', readXcodeUserDefault("IDECustomBuildLocationType"); |
| # FIXME: Read CustomBuildIntermediatesPath and set OBJROOT accordingly. |
| if ($buildLocationType eq "Absolute") { |
| $baseProductDir = readXcodeUserDefault("IDECustomBuildProductsPath"); |
| $indexDataStoreDir = readXcodeUserDefault("IDECustomIndexStorePath"); |
| } |
| } |
| |
| # DeterminedByTargets corresponds to a setting of "Legacy" in Xcode. |
| # It is the only build location style for which SHARED_PRECOMPS_DIR is not |
| # overridden when building from within Xcode. |
| $setSharedPrecompsDir = 1 if $buildLocationStyle ne "DeterminedByTargets"; |
| |
| if (!defined($baseProductDir)) { |
| $baseProductDir = join '', readXcodeUserDefault("IDEApplicationwideBuildSettings"); |
| $baseProductDir = $1 if $baseProductDir =~ /SYMROOT\s*=\s*\"(.*?)\";/s; |
| } |
| |
| undef $baseProductDir unless $baseProductDir =~ /^\//; |
| } |
| |
| if (!defined($baseProductDir)) { # Port-specific checks failed, use default |
| $baseProductDir = File::Spec->catdir($sourceDir, "WebKitBuild"); |
| } |
| |
| if (isGit() && isGitBranchBuild()) { |
| my $branch = gitBranch(); |
| $baseProductDir = "$baseProductDir/$branch"; |
| } |
| |
| if (isAppleCocoaWebKit()) { |
| $baseProductDir =~ s|^\Q$(SRCROOT)/..\E$|$sourceDir|; |
| $baseProductDir =~ s|^\Q$(SRCROOT)/../|$sourceDir/|; |
| $baseProductDir =~ s|^~/|$ENV{HOME}/|; |
| die "Can't handle Xcode product directory with a ~ in it.\n" if $baseProductDir =~ /~/; |
| die "Can't handle Xcode product directory with a variable in it.\n" if $baseProductDir =~ /\$/; |
| @baseProductDirOption = ("SYMROOT=$baseProductDir", "OBJROOT=$baseProductDir"); |
| push(@baseProductDirOption, "SHARED_PRECOMPS_DIR=${baseProductDir}/PrecompiledHeaders") if $setSharedPrecompsDir; |
| push(@baseProductDirOption, "INDEX_ENABLE_DATA_STORE=YES", "INDEX_DATA_STORE_DIR=${indexDataStoreDir}") if $indexDataStoreDir; |
| } |
| |
| if (isCygwin()) { |
| my $dosBuildPath = `cygpath --windows \"$baseProductDir\"`; |
| chomp $dosBuildPath; |
| $ENV{"WEBKIT_OUTPUTDIR"} = $dosBuildPath; |
| my $unixBuildPath = `cygpath --unix \"$baseProductDir\"`; |
| chomp $unixBuildPath; |
| $baseProductDir = $dosBuildPath; |
| } |
| } |
| |
| sub systemVerbose { |
| print "+ @_\n"; |
| return system(@_); |
| } |
| |
| sub setBaseProductDir($) |
| { |
| ($baseProductDir) = @_; |
| } |
| |
| sub determineConfiguration |
| { |
| return if defined $configuration; |
| determineBaseProductDir(); |
| if (open CONFIGURATION, "$baseProductDir/Configuration") { |
| $configuration = <CONFIGURATION>; |
| close CONFIGURATION; |
| } |
| if ($configuration) { |
| chomp $configuration; |
| # compatibility for people who have old Configuration files |
| $configuration = "Release" if $configuration eq "Deployment"; |
| $configuration = "Debug" if $configuration eq "Development"; |
| } else { |
| $configuration = "Release"; |
| } |
| } |
| |
| sub determineArchitecture |
| { |
| return if defined $architecture; |
| # make sure $architecture is defined in all cases |
| $architecture = ""; |
| |
| determineBaseProductDir(); |
| determineXcodeSDK(); |
| |
| if (isAppleCocoaWebKit()) { |
| if (open ARCHITECTURE, "$baseProductDir/Architecture") { |
| $architecture = <ARCHITECTURE>; |
| close ARCHITECTURE; |
| } |
| if ($architecture) { |
| chomp $architecture; |
| } else { |
| if (not defined $xcodeSDK or $xcodeSDK =~ /^(\/$|macosx)/) { |
| my $supports64Bit = `sysctl -n hw.optional.x86_64`; |
| chomp $supports64Bit; |
| $architecture = 'x86_64' if $supports64Bit; |
| } elsif ($xcodeSDK =~ /^iphonesimulator/) { |
| $architecture = 'x86_64'; |
| } elsif ($xcodeSDK =~ /^iphoneos/) { |
| $architecture = 'arm64'; |
| } |
| } |
| } elsif (isCMakeBuild()) { |
| if (isCrossCompilation()) { |
| my $compiler = "gcc"; |
| $compiler = $ENV{'CC'} if (defined($ENV{'CC'})); |
| my @compiler_machine = split('-', `$compiler -dumpmachine`); |
| $architecture = $compiler_machine[0]; |
| } elsif (open my $cmake_sysinfo, "cmake --system-information |") { |
| while (<$cmake_sysinfo>) { |
| next unless index($_, 'CMAKE_SYSTEM_PROCESSOR') == 0; |
| if (/^CMAKE_SYSTEM_PROCESSOR \"([^"]+)\"/) { |
| $architecture = $1; |
| last; |
| } |
| } |
| close $cmake_sysinfo; |
| } |
| } |
| |
| if (!isAnyWindows()) { |
| if (!$architecture) { |
| # Fall back to output of `uname -m', if it is present. |
| $architecture = `uname -m`; |
| chomp $architecture; |
| } |
| } |
| |
| $architecture = 'x86_64' if $architecture =~ /amd64/i; |
| $architecture = 'arm64' if $architecture =~ /aarch64/i; |
| } |
| |
| sub determineASanIsEnabled |
| { |
| return if defined $asanIsEnabled; |
| determineBaseProductDir(); |
| |
| $asanIsEnabled = 0; |
| my $asanConfigurationValue; |
| |
| if (open ASAN, "$baseProductDir/ASan") { |
| $asanConfigurationValue = <ASAN>; |
| close ASAN; |
| chomp $asanConfigurationValue; |
| $asanIsEnabled = 1 if $asanConfigurationValue eq "YES"; |
| } |
| } |
| |
| sub determineLTOMode |
| { |
| return if defined $ltoMode; |
| determineBaseProductDir(); |
| |
| if (open LTO, "$baseProductDir/LTO") { |
| $ltoMode = <LTO>; |
| close LTO; |
| chomp $ltoMode; |
| } |
| } |
| |
| sub determineNumberOfCPUs |
| { |
| return if defined $numberOfCPUs; |
| if (defined($ENV{NUMBER_OF_PROCESSORS})) { |
| $numberOfCPUs = $ENV{NUMBER_OF_PROCESSORS}; |
| } elsif (isLinux()) { |
| # First try the nproc utility, if it exists. If we get no |
| # results fall back to just interpretting /proc directly. |
| chomp($numberOfCPUs = `nproc --all 2> /dev/null`); |
| if ($numberOfCPUs eq "") { |
| $numberOfCPUs = (grep /processor/, `cat /proc/cpuinfo`); |
| } |
| } elsif (isAnyWindows()) { |
| # Assumes cygwin |
| $numberOfCPUs = `ls /proc/registry/HKEY_LOCAL_MACHINE/HARDWARE/DESCRIPTION/System/CentralProcessor | wc -w`; |
| } elsif (isDarwin() || isBSD()) { |
| chomp($numberOfCPUs = `sysctl -n hw.ncpu`); |
| } else { |
| $numberOfCPUs = 1; |
| } |
| } |
| |
| sub determineMaxCPULoad |
| { |
| return if defined $maxCPULoad; |
| if (defined($ENV{MAX_CPU_LOAD})) { |
| $maxCPULoad = $ENV{MAX_CPU_LOAD}; |
| } |
| } |
| |
| sub jscPath($) |
| { |
| my ($productDir) = @_; |
| my $jscName = "jsc"; |
| $jscName .= "_debug" if configuration() eq "Debug_All"; |
| if (isPlayStation()) { |
| $jscName .= ".elf"; |
| } elsif (isAnyWindows()) { |
| $jscName .= ".exe"; |
| } |
| return "$productDir/$jscName" if -e "$productDir/$jscName"; |
| return "$productDir/JavaScriptCore.framework/Resources/$jscName"; |
| } |
| |
| sub argumentsForConfiguration() |
| { |
| determineConfiguration(); |
| determineArchitecture(); |
| determineXcodeSDK(); |
| |
| my @args = (); |
| # FIXME: Is it necessary to pass --debug, --release, --32-bit or --64-bit? |
| # These are determined automatically from stored configuration. |
| push(@args, '--debug') if ($configuration =~ "^Debug"); |
| push(@args, '--release') if ($configuration =~ "^Release"); |
| push(@args, '--ios-device') if (defined $xcodeSDK && $xcodeSDK =~ /^iphoneos/); |
| push(@args, '--ios-simulator') if (defined $xcodeSDK && $xcodeSDK =~ /^iphonesimulator/); |
| push(@args, '--maccatalyst') if (defined $xcodeSDK && $xcodeSDK =~ /^maccatalyst/); |
| push(@args, '--32-bit') if ($architecture eq "x86" and !isWin64()); |
| push(@args, '--64-bit') if (isWin64()); |
| push(@args, '--64-bit') if (isFTW()); |
| push(@args, '--ftw') if isFTW(); |
| push(@args, '--gtk') if isGtk(); |
| push(@args, '--wpe') if isWPE(); |
| push(@args, '--jsc-only') if isJSCOnly(); |
| push(@args, '--wincairo') if isWinCairo(); |
| push(@args, '--playstation') if isPlayStation(); |
| return @args; |
| } |
| |
| sub extractNonMacOSHostConfiguration |
| { |
| my @args = (); |
| my @extract = ('--device', '--gtk', '--ios', '--platform', '--sdk', '--simulator', '--wincairo', '--ftw', 'SDKROOT', 'ARCHS'); |
| foreach (@{$_[0]}) { |
| my $line = $_; |
| my $flag = 0; |
| foreach (@extract) { |
| if (length($line) >= length($_) && substr($line, 0, length($_)) eq $_ |
| && index($line, 'i386') == -1 && index($line, 'x86_64') == -1) { |
| $flag = 1; |
| } |
| } |
| if (!$flag) { |
| push @args, $_; |
| } |
| } |
| return @args; |
| } |
| |
| # FIXME: Convert to json <rdar://problem/21594308> |
| sub parseAvailableXcodeSDKs($) |
| { |
| my @outputToParse = @{$_[0]}; |
| my @result = (); |
| foreach my $line (@outputToParse) { |
| # Examples: |
| # iOS 12.0 -sdk iphoneos12.0 |
| # Simulator - iOS 12.0 -sdk iphonesimulator12.0 |
| # macOS 10.14 -sdk macosx10.14 |
| if ($line =~ /-sdk (\D+)([\d\.]+)(\D*)\n/) { |
| if ($3) { |
| push @result, "$1.$3"; |
| } else { |
| push @result, "$1"; |
| } |
| } |
| } |
| return @result; |
| } |
| |
| sub availableXcodeSDKs |
| { |
| my @output = `xcodebuild -showsdks`; |
| return parseAvailableXcodeSDKs(\@output); |
| } |
| |
| sub determineXcodeSDK |
| { |
| return if defined $xcodeSDK; |
| my $sdk; |
| |
| # The user explicitly specified the sdk, don't assume anything |
| if (checkForArgumentAndRemoveFromARGVGettingValue("--sdk", \$sdk)) { |
| $xcodeSDK = $sdk; |
| return; |
| } |
| if (checkForArgumentAndRemoveFromARGV("--device") || checkForArgumentAndRemoveFromARGV("--ios-device")) { |
| $xcodeSDK ||= "iphoneos"; |
| } |
| if (checkForArgumentAndRemoveFromARGV("--simulator") || checkForArgumentAndRemoveFromARGV("--ios-simulator")) { |
| $xcodeSDK ||= 'iphonesimulator'; |
| } |
| if (checkForArgumentAndRemoveFromARGV("--tvos-device")) { |
| $xcodeSDK ||= "appletvos"; |
| } |
| if (checkForArgumentAndRemoveFromARGV("--tvos-simulator")) { |
| $xcodeSDK ||= "appletvsimulator"; |
| } |
| if (checkForArgumentAndRemoveFromARGV("--watchos-device")) { |
| $xcodeSDK ||= "watchos"; |
| } |
| if (checkForArgumentAndRemoveFromARGV("--watchos-simulator")) { |
| $xcodeSDK ||= "watchsimulator"; |
| } |
| if (checkForArgumentAndRemoveFromARGV("--maccatalyst")) { |
| $xcodeSDK ||= "maccatalyst"; |
| } |
| return if !defined $xcodeSDK; |
| |
| # Prefer the internal version of an sdk, if it exists. |
| my @availableSDKs = availableXcodeSDKs(); |
| |
| foreach my $sdk (@availableSDKs) { |
| next if $sdk ne "$xcodeSDK.internal"; |
| $xcodeSDK = $sdk; |
| last; |
| } |
| } |
| |
| sub xcodeSDK |
| { |
| determineXcodeSDK(); |
| return $xcodeSDK; |
| } |
| |
| sub setXcodeSDK($) |
| { |
| ($xcodeSDK) = @_; |
| } |
| |
| |
| sub xcodeSDKPlatformName() |
| { |
| determineXcodeSDK(); |
| return "" if !defined $xcodeSDK; |
| return "appletvos" if $xcodeSDK =~ /appletvos/i; |
| return "appletvsimulator" if $xcodeSDK =~ /appletvsimulator/i; |
| return "iphoneos" if $xcodeSDK =~ /iphoneos/i; |
| return "iphonesimulator" if $xcodeSDK =~ /iphonesimulator/i; |
| return "macosx" if $xcodeSDK =~ /macosx/i; |
| return "watchos" if $xcodeSDK =~ /watchos/i; |
| return "watchsimulator" if $xcodeSDK =~ /watchsimulator/i; |
| return "maccatalyst" if $xcodeSDK =~ /maccatalyst/i; |
| die "Couldn't determine platform name from Xcode SDK"; |
| } |
| |
| sub XcodeSDKPath |
| { |
| determineXcodeSDK(); |
| |
| die "Can't find the SDK path because no Xcode SDK was specified" if not $xcodeSDK; |
| return sdkDirectory($xcodeSDK); |
| } |
| |
| sub xcodeSDKVersion |
| { |
| determineXcodeSDK(); |
| |
| die "Can't find the SDK version because no Xcode SDK was specified" if !$xcodeSDK; |
| |
| chomp(my $sdkVersion = `xcrun --sdk $xcodeSDK --show-sdk-version`); |
| die "Failed to get SDK version from xcrun" if exitStatus($?); |
| |
| return $sdkVersion; |
| } |
| |
| sub programFilesPath |
| { |
| return $programFilesPath if defined $programFilesPath; |
| |
| $programFilesPath = $ENV{'PROGRAMFILES(X86)'} || $ENV{'PROGRAMFILES'} || "C:\\Program Files"; |
| |
| return $programFilesPath; |
| } |
| |
| sub programFilesPathX86 |
| { |
| my $programFilesPathX86 = $ENV{'PROGRAMFILES(X86)'} || "C:\\Program Files (x86)"; |
| |
| return $programFilesPathX86; |
| } |
| |
| sub visualStudioInstallDirVSWhere |
| { |
| my $vswhere = File::Spec->catdir(programFilesPathX86(), "Microsoft Visual Studio", "Installer", "vswhere.exe"); |
| return unless -e $vswhere; |
| open(my $handle, "-|", $vswhere, qw(-nologo -latest -requires Microsoft.Component.MSBuild -property installationPath)) || return; |
| my $vsWhereOut = <$handle>; |
| $vsWhereOut =~ s/\r?\n//; |
| return $vsWhereOut; |
| } |
| |
| sub visualStudioInstallDir |
| { |
| return $vsInstallDir if defined $vsInstallDir; |
| |
| if ($ENV{'VSINSTALLDIR'}) { |
| $vsInstallDir = $ENV{'VSINSTALLDIR'}; |
| $vsInstallDir =~ s|[\\/]$||; |
| } else { |
| $vsInstallDir = visualStudioInstallDirVSWhere(); |
| return unless defined $vsInstallDir; |
| } |
| chomp($vsInstallDir = `cygpath "$vsInstallDir"`) if isCygwin(); |
| |
| print "Using Visual Studio: $vsInstallDir\n"; |
| return $vsInstallDir; |
| } |
| |
| sub msBuildPath |
| { |
| my $installDir = visualStudioInstallDir(); |
| |
| # FIXME: vswhere.exe should be used to find msbuild.exe after AppleWin will get vswhere with -find switch. |
| # <https://github.com/Microsoft/vswhere/wiki/Find-MSBuild> |
| # <https://github.com/Microsoft/vswhere/releases/tag/2.6.6%2Bd9dbe79db3> |
| my $path = File::Spec->catdir($installDir, "MSBuild", "Current", "bin", "MSBuild.exe"); |
| $path = File::Spec->catdir($installDir, "MSBuild", "15.0", "bin", "MSBuild.exe") unless -e $path; |
| |
| chomp($path = `cygpath "$path"`) if isCygwin(); |
| |
| print "Using MSBuild: $path\n"; |
| return $path; |
| } |
| |
| sub determineConfigurationForVisualStudio |
| { |
| return if defined $configurationForVisualStudio; |
| determineConfiguration(); |
| # FIXME: We should detect when Debug_All or Production has been chosen. |
| $configurationForVisualStudio = "/p:Configuration=" . $configuration; |
| } |
| |
| sub usesPerConfigurationBuildDirectory |
| { |
| # [Gtk] We don't have Release/Debug configurations in straight |
| # autotool builds (non build-webkit). In this case and if |
| # WEBKIT_OUTPUTDIR exist, use that as our configuration dir. This will |
| # allows us to run run-webkit-tests without using build-webkit. |
| return ($ENV{"WEBKIT_OUTPUTDIR"} && isGtk()) || isAppleWinWebKit() || isFTW(); |
| } |
| |
| sub determineConfigurationProductDir |
| { |
| return if defined $configurationProductDir; |
| determineBaseProductDir(); |
| determineConfiguration(); |
| if (isAppleWinWebKit() || isWinCairo() || isPlayStation() || isFTW()) { |
| $configurationProductDir = File::Spec->catdir($baseProductDir, $configuration); |
| } else { |
| if (usesPerConfigurationBuildDirectory()) { |
| $configurationProductDir = "$baseProductDir"; |
| } else { |
| $configurationProductDir = "$baseProductDir/$configuration"; |
| $configurationProductDir .= "-" . xcodeSDKPlatformName() if isEmbeddedWebKit() || isMacCatalystWebKit(); |
| } |
| } |
| } |
| |
| sub setConfigurationProductDir($) |
| { |
| ($configurationProductDir) = @_; |
| } |
| |
| sub determineCurrentSVNRevision |
| { |
| # We always update the current SVN revision here, and leave the caching |
| # to currentSVNRevision(), so that changes to the SVN revision while the |
| # script is running can be picked up by calling this function again. |
| determineSourceDir(); |
| $currentSVNRevision = svnRevisionForDirectory($sourceDir); |
| return $currentSVNRevision; |
| } |
| |
| |
| sub chdirWebKit |
| { |
| determineSourceDir(); |
| chdir $sourceDir or die; |
| } |
| |
| sub baseProductDir |
| { |
| determineBaseProductDir(); |
| return $baseProductDir; |
| } |
| |
| sub sourceDir |
| { |
| determineSourceDir(); |
| return $sourceDir; |
| } |
| |
| sub productDir |
| { |
| determineConfigurationProductDir(); |
| return $configurationProductDir; |
| } |
| |
| sub executableProductDir |
| { |
| my $productDirectory = productDir(); |
| |
| my $binaryDirectory; |
| if (isAnyWindows() && !isPlayStation()) { |
| $binaryDirectory = isWin64() ? "bin64" : "bin32"; |
| } elsif (isGtk() || isJSCOnly() || isWPE() || isPlayStation()) { |
| $binaryDirectory = "bin"; |
| } else { |
| return $productDirectory; |
| } |
| |
| return File::Spec->catdir($productDirectory, $binaryDirectory); |
| } |
| |
| sub jscProductDir |
| { |
| return executableProductDir(); |
| } |
| |
| sub configuration() |
| { |
| determineConfiguration(); |
| return $configuration; |
| } |
| |
| sub asanIsEnabled() |
| { |
| determineASanIsEnabled(); |
| return $asanIsEnabled; |
| } |
| |
| sub ltoMode() |
| { |
| determineLTOMode(); |
| return $ltoMode; |
| } |
| |
| sub configurationForVisualStudio() |
| { |
| determineConfigurationForVisualStudio(); |
| return $configurationForVisualStudio; |
| } |
| |
| sub currentSVNRevision |
| { |
| determineCurrentSVNRevision() if not defined $currentSVNRevision; |
| return $currentSVNRevision; |
| } |
| |
| sub generateDsym() |
| { |
| determineGenerateDsym(); |
| return $generateDsym; |
| } |
| |
| sub determineGenerateDsym() |
| { |
| return if defined($generateDsym); |
| $generateDsym = checkForArgumentAndRemoveFromARGV("--dsym"); |
| } |
| |
| sub hasIOSDevelopmentCertificate() |
| { |
| return !exitStatus(system("security find-identity -p codesigning | grep '" . IOS_DEVELOPMENT_CERTIFICATE_NAME_PREFIX . "' > /dev/null 2>&1")); |
| } |
| |
| sub argumentsForXcode() |
| { |
| my @args = (); |
| push @args, "DEBUG_INFORMATION_FORMAT=dwarf-with-dsym" if generateDsym(); |
| return @args; |
| } |
| |
| sub XcodeOptions |
| { |
| determineBaseProductDir(); |
| determineConfiguration(); |
| determineArchitecture(); |
| determineASanIsEnabled(); |
| determineLTOMode(); |
| determineXcodeSDK(); |
| |
| my @options; |
| push @options, "-UseSanitizedBuildSystemEnvironment=YES"; |
| push @options, "-ShowBuildOperationDuration=YES"; |
| push @options, ("-configuration", $configuration); |
| push @options, ("-xcconfig", sourceDir() . "/Tools/asan/asan.xcconfig", "ASAN_IGNORE=" . sourceDir() . "/Tools/asan/webkit-asan-ignore.txt") if $asanIsEnabled; |
| push @options, "WK_LTO_MODE=$ltoMode" if $ltoMode; |
| push @options, @baseProductDirOption; |
| push @options, "ARCHS=$architecture" if $architecture; |
| push @options, "SDKROOT=$xcodeSDK" if $xcodeSDK; |
| if (willUseIOSDeviceSDK()) { |
| push @options, "ENABLE_BITCODE=NO"; |
| if (hasIOSDevelopmentCertificate()) { |
| # FIXME: May match more than one installed development certificate. |
| push @options, "CODE_SIGN_IDENTITY=" . IOS_DEVELOPMENT_CERTIFICATE_NAME_PREFIX; |
| } else { |
| push @options, "CODE_SIGN_IDENTITY="; # No identity |
| push @options, "CODE_SIGNING_REQUIRED=NO"; |
| } |
| } |
| push @options, argumentsForXcode(); |
| return @options; |
| } |
| |
| sub XcodeOptionString |
| { |
| return join " ", XcodeOptions(); |
| } |
| |
| sub XcodeOptionStringNoConfig |
| { |
| return join " ", @baseProductDirOption; |
| } |
| |
| sub XcodeCoverageSupportOptions() |
| { |
| my @coverageSupportOptions = (); |
| push @coverageSupportOptions, "GCC_GENERATE_TEST_COVERAGE_FILES=YES"; |
| push @coverageSupportOptions, "GCC_INSTRUMENT_PROGRAM_FLOW_ARCS=YES"; |
| return @coverageSupportOptions; |
| } |
| |
| sub XcodeStaticAnalyzerOption() |
| { |
| return "RUN_CLANG_STATIC_ANALYZER=YES"; |
| } |
| |
| sub canUseXCBuild() |
| { |
| # if (`xcodebuild -version | grep "Build version"` =~ /Build version (\d+)([a-zA-Z])(\d+)([a-zA-Z]?)/) { |
| # return $1 >= 11; |
| # } |
| |
| return 0; |
| } |
| |
| my $passedConfiguration; |
| my $searchedForPassedConfiguration; |
| sub determinePassedConfiguration |
| { |
| return if $searchedForPassedConfiguration; |
| $searchedForPassedConfiguration = 1; |
| $passedConfiguration = undef; |
| |
| if (checkForArgumentAndRemoveFromARGV("--debug")) { |
| $passedConfiguration = "Debug"; |
| } elsif(checkForArgumentAndRemoveFromARGV("--release")) { |
| $passedConfiguration = "Release"; |
| } elsif (checkForArgumentAndRemoveFromARGV("--profile") || checkForArgumentAndRemoveFromARGV("--profiling")) { |
| $passedConfiguration = "Profiling"; |
| } |
| } |
| |
| sub passedConfiguration |
| { |
| determinePassedConfiguration(); |
| return $passedConfiguration; |
| } |
| |
| sub setConfiguration |
| { |
| setArchitecture(); |
| |
| if (my $config = shift @_) { |
| $configuration = $config; |
| return; |
| } |
| |
| determinePassedConfiguration(); |
| $configuration = $passedConfiguration if $passedConfiguration; |
| } |
| |
| |
| my $passedArchitecture; |
| my $searchedForPassedArchitecture; |
| sub determinePassedArchitecture |
| { |
| return if $searchedForPassedArchitecture; |
| $searchedForPassedArchitecture = 1; |
| |
| $passedArchitecture = undef; |
| if (shouldBuild32Bit()) { |
| if (isAppleCocoaWebKit()) { |
| # PLATFORM_IOS: Don't run `arch` command inside Simulator environment |
| local %ENV = %ENV; |
| delete $ENV{DYLD_ROOT_PATH}; |
| delete $ENV{DYLD_FRAMEWORK_PATH}; |
| |
| $passedArchitecture = `arch`; |
| chomp $passedArchitecture; |
| } |
| } |
| } |
| |
| sub passedArchitecture |
| { |
| determinePassedArchitecture(); |
| return $passedArchitecture; |
| } |
| |
| sub architecture() |
| { |
| determineArchitecture(); |
| return $architecture; |
| } |
| |
| sub numberOfCPUs() |
| { |
| determineNumberOfCPUs(); |
| return $numberOfCPUs; |
| } |
| |
| sub maxCPULoad() |
| { |
| determineMaxCPULoad(); |
| return $maxCPULoad; |
| } |
| |
| sub setArchitecture |
| { |
| if (my $arch = shift @_) { |
| $architecture = $arch; |
| return; |
| } |
| |
| determinePassedArchitecture(); |
| $architecture = $passedArchitecture if $passedArchitecture; |
| } |
| |
| # Locate Safari. |
| sub safariPath |
| { |
| die "Safari path is only relevant on Apple Mac platform\n" unless isAppleMacWebKit(); |
| |
| my $safariPath; |
| |
| # Use WEBKIT_SAFARI environment variable if present. |
| my $safariBundle = $ENV{WEBKIT_SAFARI}; |
| if (!$safariBundle) { |
| determineConfigurationProductDir(); |
| # Use Safari.app in product directory if present (good for Safari development team). |
| if (-d "$configurationProductDir/Safari.app") { |
| $safariBundle = "$configurationProductDir/Safari.app"; |
| } |
| } |
| |
| if ($safariBundle) { |
| $safariPath = "$safariBundle/Contents/MacOS/Safari"; |
| } else { |
| $safariPath = "/Applications/Safari.app/Contents/MacOS/SafariForWebKitDevelopment"; |
| } |
| |
| die "Can't find executable at $safariPath.\n" if !-x $safariPath; |
| return $safariPath; |
| } |
| |
| sub builtDylibPathForName |
| { |
| my $libraryName = shift; |
| determineConfigurationProductDir(); |
| |
| if (isGtk()) { |
| my $extension = isDarwin() ? ".dylib" : ".so"; |
| return "$configurationProductDir/lib/libwebkit2gtk-4.0" . $extension; |
| } |
| if (isIOSWebKit()) { |
| return "$configurationProductDir/$libraryName.framework/$libraryName"; |
| } |
| if (isAppleCocoaWebKit()) { |
| return "$configurationProductDir/$libraryName.framework/Versions/A/$libraryName"; |
| } |
| if (isAppleWinWebKit() || isFTW()) { |
| if ($libraryName eq "JavaScriptCore") { |
| return "$baseProductDir/lib/$libraryName.lib"; |
| } else { |
| return "$baseProductDir/$libraryName.intermediate/$configuration/$libraryName.intermediate/$libraryName.lib"; |
| } |
| } |
| if (isWPE()) { |
| return "$configurationProductDir/lib/libWPEWebKit-1.0.so"; |
| } |
| |
| die "Unsupported platform, can't determine built library locations.\nTry `build-webkit --help` for more information.\n"; |
| } |
| |
| # Check to see that all the frameworks are built. |
| sub checkFrameworks # FIXME: This is a poor name since only the Mac calls built WebCore a Framework. |
| { |
| return if isAnyWindows(); |
| my @frameworks = ("JavaScriptCore", "WebCore"); |
| push(@frameworks, "WebKit") if isAppleCocoaWebKit(); # FIXME: This seems wrong, all ports should have a WebKit these days. |
| for my $framework (@frameworks) { |
| my $path = builtDylibPathForName($framework); |
| die "Can't find built framework at \"$path\".\n" unless -e $path; |
| } |
| } |
| |
| sub isInspectorFrontend() |
| { |
| determineIsInspectorFrontend(); |
| return $isInspectorFrontend; |
| } |
| |
| sub determineIsInspectorFrontend() |
| { |
| return if defined($isInspectorFrontend); |
| $isInspectorFrontend = checkForArgumentAndRemoveFromARGV("--inspector-frontend"); |
| } |
| |
| sub commandExists($) |
| { |
| my $command = shift; |
| my $devnull = File::Spec->devnull(); |
| |
| if (isAnyWindows()) { |
| return exitStatus(system("where /q $command >$devnull 2>&1")) == 0; |
| } |
| return exitStatus(system("which $command >$devnull 2>&1")) == 0; |
| } |
| |
| sub checkForArgumentAndRemoveFromARGV($) |
| { |
| my $argToCheck = shift; |
| return checkForArgumentAndRemoveFromArrayRef($argToCheck, \@ARGV); |
| } |
| |
| sub checkForArgumentAndRemoveFromArrayRefGettingValue($$$) |
| { |
| my ($argToCheck, $valueRef, $arrayRef) = @_; |
| my $argumentStartRegEx = qr#^$argToCheck(?:=\S|$)#; |
| my $i = 0; |
| for (; $i < @$arrayRef; ++$i) { |
| last if $arrayRef->[$i] =~ $argumentStartRegEx; |
| } |
| if ($i >= @$arrayRef) { |
| return $$valueRef = undef; |
| } |
| my ($key, $value) = split("=", $arrayRef->[$i]); |
| splice(@$arrayRef, $i, 1); |
| if (defined($value)) { |
| # e.g. --sdk=iphonesimulator |
| return $$valueRef = $value; |
| } |
| return $$valueRef = splice(@$arrayRef, $i, 1); # e.g. --sdk iphonesimulator |
| } |
| |
| sub checkForArgumentAndRemoveFromARGVGettingValue($$) |
| { |
| my ($argToCheck, $valueRef) = @_; |
| return checkForArgumentAndRemoveFromArrayRefGettingValue($argToCheck, $valueRef, \@ARGV); |
| } |
| |
| sub findMatchingArguments($$) |
| { |
| my ($argToCheck, $arrayRef) = @_; |
| my @matchingIndices; |
| foreach my $index (0 .. $#$arrayRef) { |
| my $opt = $$arrayRef[$index]; |
| if ($opt =~ /^$argToCheck$/i ) { |
| push(@matchingIndices, $index); |
| } |
| } |
| return @matchingIndices; |
| } |
| |
| sub hasArgument($$) |
| { |
| my ($argToCheck, $arrayRef) = @_; |
| my @matchingIndices = findMatchingArguments($argToCheck, $arrayRef); |
| return scalar @matchingIndices > 0; |
| } |
| |
| sub checkForArgumentAndRemoveFromArrayRef |
| { |
| my ($argToCheck, $arrayRef) = @_; |
| my @indicesToRemove = findMatchingArguments($argToCheck, $arrayRef); |
| my $removeOffset = 0; |
| foreach my $index (@indicesToRemove) { |
| splice(@$arrayRef, $index - $removeOffset++, 1); |
| } |
| return scalar @indicesToRemove > 0; |
| } |
| |
| sub prohibitUnknownPort() |
| { |
| $unknownPortProhibited = 1; |
| } |
| |
| sub determinePortName() |
| { |
| return if defined $portName; |
| |
| my %argToPortName = ( |
| ftw => FTW, |
| gtk => GTK, |
| 'jsc-only' => JSCOnly, |
| playstation => PlayStation, |
| wincairo => WinCairo, |
| wpe => WPE |
| ); |
| |
| for my $arg (sort keys %argToPortName) { |
| if (checkForArgumentAndRemoveFromARGV("--$arg")) { |
| die "Argument '--$arg' conflicts with selected port '$portName'\n" |
| if defined $portName; |
| |
| $portName = $argToPortName{$arg}; |
| } |
| } |
| |
| return if defined $portName; |
| |
| # Port was not selected via command line, use appropriate default value |
| |
| if (isAnyWindows()) { |
| $portName = AppleWin; |
| } elsif (isDarwin()) { |
| determineXcodeSDK(); |
| if (willUseIOSDeviceSDK() || willUseIOSSimulatorSDK()) { |
| $portName = iOS; |
| } elsif (willUseAppleTVDeviceSDK() || willUseAppleTVSimulatorSDK()) { |
| $portName = tvOS; |
| } elsif (willUseWatchDeviceSDK() || willUseWatchSimulatorSDK()) { |
| $portName = watchOS; |
| } elsif (willUseMacCatalystSDK()) { |
| $portName = MacCatalyst; |
| } else { |
| $portName = Mac; |
| } |
| } else { |
| if ($unknownPortProhibited) { |
| my $portsChoice = join "\n\t", qw( |
| --gtk |
| --jsc-only |
| --wpe |
| ); |
| die "Please specify which WebKit port to build using one of the following options:" |
| . "\n\t$portsChoice\n"; |
| } |
| |
| # If script is run without arguments we cannot determine port |
| # TODO: This state should be outlawed |
| $portName = Unknown; |
| } |
| } |
| |
| sub portName() |
| { |
| determinePortName(); |
| return $portName; |
| } |
| |
| sub isGtk() |
| { |
| return portName() eq GTK; |
| } |
| |
| sub isJSCOnly() |
| { |
| return portName() eq JSCOnly; |
| } |
| |
| sub isWPE() |
| { |
| return portName() eq WPE; |
| } |
| |
| sub isPlayStation() |
| { |
| return portName() eq PlayStation; |
| } |
| |
| # Determine if this is debian, ubuntu, linspire, or something similar. |
| sub isDebianBased() |
| { |
| return -e "/etc/debian_version"; |
| } |
| |
| sub isFedoraBased() |
| { |
| return -e "/etc/fedora-release"; |
| } |
| |
| sub isFTW() |
| { |
| return portName() eq FTW; |
| } |
| |
| sub isWinCairo() |
| { |
| return portName() eq WinCairo; |
| } |
| |
| sub shouldBuild32Bit() |
| { |
| determineShouldBuild32Bit(); |
| return $shouldBuild32Bit; |
| } |
| |
| sub determineShouldBuild32Bit() |
| { |
| return if defined($shouldBuild32Bit); |
| $shouldBuild32Bit = checkForArgumentAndRemoveFromARGV("--32-bit"); |
| } |
| |
| sub isWin64() |
| { |
| determineIsWin64(); |
| return $isWin64; |
| } |
| |
| sub determineIsWin64() |
| { |
| return if defined($isWin64); |
| $isWin64 = checkForArgumentAndRemoveFromARGV("--64-bit") || ((isFTW() || isWinCairo() || isJSCOnly()) && !shouldBuild32Bit()); |
| } |
| |
| sub determineIsWin64FromArchitecture($) |
| { |
| my $arch = shift; |
| $isWin64 = ($arch eq "x86_64"); |
| return $isWin64; |
| } |
| |
| sub isCygwin() |
| { |
| return ($^O eq "cygwin") || 0; |
| } |
| |
| sub isAnyWindows() |
| { |
| return isWindows() || isCygwin(); |
| } |
| |
| sub determineWinVersion() |
| { |
| return if $winVersion; |
| |
| if (!isAnyWindows()) { |
| $winVersion = -1; |
| return; |
| } |
| |
| my $versionString = `cmd /c ver`; |
| $versionString =~ /(\d)\.(\d)\.(\d+)/; |
| |
| $winVersion = { |
| major => $1, |
| minor => $2, |
| build => $3, |
| }; |
| } |
| |
| sub winVersion() |
| { |
| determineWinVersion(); |
| return $winVersion; |
| } |
| |
| sub isWindows7SP0() |
| { |
| return isAnyWindows() && winVersion()->{major} == 6 && winVersion()->{minor} == 1 && winVersion()->{build} == 7600; |
| } |
| |
| sub isWindowsVista() |
| { |
| return isAnyWindows() && winVersion()->{major} == 6 && winVersion()->{minor} == 0; |
| } |
| |
| sub isWindowsXP() |
| { |
| return isAnyWindows() && winVersion()->{major} == 5 && winVersion()->{minor} == 1; |
| } |
| |
| sub isDarwin() |
| { |
| return ($^O eq "darwin") || 0; |
| } |
| |
| sub isWindows() |
| { |
| return ($^O eq "MSWin32") || 0; |
| } |
| |
| sub isLinux() |
| { |
| return ($^O eq "linux") || 0; |
| } |
| |
| sub isBSD() |
| { |
| return ($^O eq "freebsd") || ($^O eq "openbsd") || ($^O eq "netbsd") || 0; |
| } |
| |
| sub isX86_64() |
| { |
| return (architecture() eq "x86_64") || 0; |
| } |
| |
| sub isARM64() |
| { |
| return (architecture() eq "arm64") || 0; |
| } |
| |
| sub isCrossCompilation() |
| { |
| my $compiler = ""; |
| $compiler = $ENV{'CC'} if (defined($ENV{'CC'})); |
| if ($compiler =~ /gcc/) { |
| my $compilerOptions = `$compiler -v 2>&1`; |
| my @host = $compilerOptions =~ m/--host=(.*?)\s/; |
| my @target = $compilerOptions =~ m/--target=(.*?)\s/; |
| if (!@target || !@host) { |
| # Sometimes a compiler does not report the host of target it was compiled for, |
| # in which case, lacking better information we assume we are not cross-compiling. |
| return 0; |
| } |
| elsif ($target[0] ne "" && $host[0] ne "") { |
| return ($host[0] ne $target[0]); |
| } else { |
| # $tempDir gets automatically deleted when goes out of scope |
| my $tempDir = File::Temp->newdir(); |
| my $testProgramSourcePath = File::Spec->catfile($tempDir, "testcross.c"); |
| my $testProgramBinaryPath = File::Spec->catfile($tempDir, "testcross"); |
| open(my $testProgramSourceHandler, ">", $testProgramSourcePath); |
| print $testProgramSourceHandler "int main() { return 0; }\n"; |
| system("$compiler $testProgramSourcePath -o $testProgramBinaryPath > /dev/null 2>&1") == 0 or return 0; |
| # Crosscompiling if the program fails to run (because it was built for other arch) |
| system("$testProgramBinaryPath > /dev/null 2>&1") == 0 or return 1; |
| return 0; |
| } |
| } |
| return 0; |
| } |
| |
| sub isIOSWebKit() |
| { |
| return portName() eq iOS; |
| } |
| |
| sub isTVOSWebKit() |
| { |
| return portName() eq tvOS; |
| } |
| |
| sub isWatchOSWebKit() |
| { |
| return portName() eq watchOS; |
| } |
| |
| sub isEmbeddedWebKit() |
| { |
| return isIOSWebKit() || isTVOSWebKit() || isWatchOSWebKit(); |
| } |
| |
| sub isAppleWebKit() |
| { |
| return isAppleCocoaWebKit() || isAppleWinWebKit(); |
| } |
| |
| sub isAppleMacWebKit() |
| { |
| return portName() eq Mac; |
| } |
| |
| sub isMacCatalystWebKit() |
| { |
| return portName() eq MacCatalyst; |
| } |
| |
| sub isAppleCocoaWebKit() |
| { |
| return isAppleMacWebKit() || isEmbeddedWebKit() || isMacCatalystWebKit(); |
| } |
| |
| sub isAppleWinWebKit() |
| { |
| return portName() eq AppleWin; |
| } |
| |
| sub iOSSimulatorDevicesPath |
| { |
| return "$ENV{HOME}/Library/Developer/CoreSimulator/Devices"; |
| } |
| |
| sub iOSSimulatorDevices |
| { |
| eval "require Foundation"; |
| my $devicesPath = iOSSimulatorDevicesPath(); |
| opendir(DEVICES, $devicesPath); |
| my @udids = grep { |
| $_ =~ m/^[0-9A-F]{8}-([0-9A-F]{4}-){3}[0-9A-F]{12}$/; |
| } readdir(DEVICES); |
| close(DEVICES); |
| |
| # FIXME: We should parse the device.plist file ourself and map the dictionary keys in it to known |
| # dictionary keys so as to decouple our representation of the plist from the actual structure |
| # of the plist, which may change. |
| my @devices = map { |
| Foundation::perlRefFromObjectRef(NSDictionary->dictionaryWithContentsOfFile_("$devicesPath/$_/device.plist")); |
| } @udids; |
| |
| return @devices; |
| } |
| |
| sub createiOSSimulatorDevice |
| { |
| my $name = shift; |
| my $deviceTypeId = shift; |
| my $runtimeId = shift; |
| |
| my $created = system("xcrun", "--sdk", "iphonesimulator", "simctl", "create", $name, $deviceTypeId, $runtimeId) == 0; |
| die "Couldn't create simulator device: $name $deviceTypeId $runtimeId" if not $created; |
| |
| system("xcrun", "--sdk", "iphonesimulator", "simctl", "list"); |
| |
| print "Waiting for device to be created ...\n"; |
| sleep 5; |
| for (my $tries = 0; $tries < 5; $tries++){ |
| my @devices = iOSSimulatorDevices(); |
| foreach my $device (@devices) { |
| return $device if $device->{name} eq $name and $device->{deviceType} eq $deviceTypeId and $device->{runtime} eq $runtimeId; |
| } |
| sleep 5; |
| } |
| die "Device $name $deviceTypeId $runtimeId wasn't found in " . iOSSimulatorDevicesPath(); |
| } |
| |
| sub willUseIOSDeviceSDK() |
| { |
| return xcodeSDKPlatformName() eq "iphoneos"; |
| } |
| |
| sub willUseIOSSimulatorSDK() |
| { |
| return xcodeSDKPlatformName() eq "iphonesimulator"; |
| } |
| |
| sub willUseAppleTVDeviceSDK() |
| { |
| return xcodeSDKPlatformName() eq "appletvos"; |
| } |
| |
| sub willUseAppleTVSimulatorSDK() |
| { |
| return xcodeSDKPlatformName() eq "appletvsimulator"; |
| } |
| |
| sub willUseWatchDeviceSDK() |
| { |
| return xcodeSDKPlatformName() eq "watchos"; |
| } |
| |
| sub willUseWatchSimulatorSDK() |
| { |
| return xcodeSDKPlatformName() eq "watchsimulator"; |
| } |
| |
| sub willUseMacCatalystSDK() |
| { |
| return xcodeSDKPlatformName() eq "maccatalyst"; |
| } |
| |
| sub determineNmPath() |
| { |
| return if $nmPath; |
| |
| if (isAppleCocoaWebKit()) { |
| $nmPath = `xcrun -find nm`; |
| chomp $nmPath; |
| } |
| $nmPath = "nm" if !$nmPath; |
| } |
| |
| sub nmPath() |
| { |
| determineNmPath(); |
| return $nmPath; |
| } |
| |
| sub splitVersionString |
| { |
| my $versionString = shift; |
| my @splitVersion = split(/\./, $versionString); |
| @splitVersion >= 2 or die "Invalid version $versionString"; |
| $osXVersion = { |
| "major" => $splitVersion[0], |
| "minor" => $splitVersion[1], |
| "subminor" => (defined($splitVersion[2]) ? $splitVersion[2] : 0), |
| }; |
| } |
| |
| sub determineOSXVersion() |
| { |
| return if $osXVersion; |
| |
| if (!isDarwin()) { |
| $osXVersion = -1; |
| return; |
| } |
| |
| my $versionString = `sw_vers -productVersion`; |
| $osXVersion = splitVersionString($versionString); |
| } |
| |
| sub osXVersion() |
| { |
| determineOSXVersion(); |
| return $osXVersion; |
| } |
| |
| sub determineIOSVersion() |
| { |
| return if $iosVersion; |
| |
| if (!isIOSWebKit()) { |
| $iosVersion = -1; |
| return; |
| } |
| |
| my $versionString = xcodeSDKVersion(); |
| $iosVersion = splitVersionString($versionString); |
| } |
| |
| sub iosVersion() |
| { |
| determineIOSVersion(); |
| return $iosVersion; |
| } |
| |
| sub isWindowsNT() |
| { |
| return $ENV{'OS'} eq 'Windows_NT'; |
| } |
| |
| sub appendToEnvironmentVariableList($$) |
| { |
| my ($name, $value) = @_; |
| |
| if (defined($ENV{$name})) { |
| $ENV{$name} .= $Config{path_sep} . $value; |
| } else { |
| $ENV{$name} = $value; |
| } |
| } |
| |
| sub prependToEnvironmentVariableList($$) |
| { |
| my ($name, $value) = @_; |
| |
| if (defined($ENV{$name})) { |
| $ENV{$name} = $value . $Config{path_sep} . $ENV{$name}; |
| } else { |
| $ENV{$name} = $value; |
| } |
| } |
| |
| sub sharedCommandLineOptions() |
| { |
| return ( |
| "g|guard-malloc" => \$shouldUseGuardMalloc, |
| ); |
| } |
| |
| sub sharedCommandLineOptionsUsage |
| { |
| my %opts = @_; |
| |
| my %switches = ( |
| '-g|--guard-malloc' => 'Use guardmalloc when running executable', |
| ); |
| |
| my $indent = " " x ($opts{indent} || 2); |
| my $switchWidth = List::Util::max(int($opts{switchWidth}), List::Util::max(map { length($_) } keys %switches) + ($opts{brackets} ? 2 : 0)); |
| |
| my $result = "Common switches:\n"; |
| |
| for my $switch (keys %switches) { |
| my $switchName = $opts{brackets} ? "[" . $switch . "]" : $switch; |
| $result .= sprintf("%s%-" . $switchWidth . "s %s\n", $indent, $switchName, $switches{$switch}); |
| } |
| |
| return $result; |
| } |
| |
| sub setUpGuardMallocIfNeeded |
| { |
| if (!isDarwin()) { |
| return; |
| } |
| |
| if (!defined($shouldUseGuardMalloc)) { |
| $shouldUseGuardMalloc = checkForArgumentAndRemoveFromARGV("-g") || checkForArgumentAndRemoveFromARGV("--guard-malloc"); |
| } |
| |
| if ($shouldUseGuardMalloc) { |
| appendToEnvironmentVariableList("DYLD_INSERT_LIBRARIES", "/usr/lib/libgmalloc.dylib"); |
| appendToEnvironmentVariableList("__XPC_DYLD_INSERT_LIBRARIES", "/usr/lib/libgmalloc.dylib"); |
| } |
| } |
| |
| sub relativeScriptsDir() |
| { |
| my $scriptDir = File::Spec->catpath("", File::Spec->abs2rel($FindBin::Bin, getcwd()), ""); |
| if ($scriptDir eq "") { |
| $scriptDir = "."; |
| } |
| return $scriptDir; |
| } |
| |
| sub launcherPath() |
| { |
| my $relativeScriptsPath = relativeScriptsDir(); |
| if (isGtk() || isWPE()) { |
| if (inFlatpakSandbox()) { |
| return "Tools/Scripts/run-minibrowser"; |
| } |
| return "$relativeScriptsPath/run-minibrowser"; |
| } elsif (isAppleWebKit()) { |
| return "$relativeScriptsPath/run-safari"; |
| } |
| } |
| |
| sub launcherName() |
| { |
| if (isGtk() || isWPE()) { |
| return "MiniBrowser"; |
| } elsif (isAppleMacWebKit()) { |
| return "Safari"; |
| } elsif (isAppleWinWebKit() || isFTW()) { |
| return "MiniBrowser"; |
| } |
| } |
| |
| sub checkRequiredSystemConfig |
| { |
| if (isDarwin()) { |
| chomp(my $productVersion = `sw_vers -productVersion`); |
| if (eval "v$productVersion" lt v10.10.5) { |
| print "*************************************************************\n"; |
| print "OS X Yosemite v10.10.5 or later is required to build WebKit.\n"; |
| print "You have " . $productVersion . ", thus the build will most likely fail.\n"; |
| print "*************************************************************\n"; |
| } |
| determineXcodeVersion(); |
| if (eval "v$xcodeVersion" lt v7.0) { |
| print "*************************************************************\n"; |
| print "Xcode 7.0 or later is required to build WebKit.\n"; |
| print "You have an earlier version of Xcode, thus the build will\n"; |
| print "most likely fail. The latest Xcode is available from the App Store.\n"; |
| print "*************************************************************\n"; |
| } |
| } |
| } |
| |
| sub determineWindowsSourceDir() |
| { |
| return if $windowsSourceDir; |
| $windowsSourceDir = sourceDir(); |
| chomp($windowsSourceDir = `cygpath -w '$windowsSourceDir'`) if isCygwin(); |
| } |
| |
| sub windowsSourceDir() |
| { |
| determineWindowsSourceDir(); |
| return $windowsSourceDir; |
| } |
| |
| sub windowsSourceSourceDir() |
| { |
| return File::Spec->catdir(windowsSourceDir(), "Source"); |
| } |
| |
| sub windowsLibrariesDir() |
| { |
| return File::Spec->catdir(windowsSourceDir(), "WebKitLibraries", "win"); |
| } |
| |
| sub windowsOutputDir() |
| { |
| return File::Spec->catdir(windowsSourceDir(), "WebKitBuild"); |
| } |
| |
| sub fontExists($) |
| { |
| my $font = shift; |
| my $cmd = "reg query \"HKLM\\SOFTWARE\\Microsoft\\Windows NT\\CurrentVersion\\Fonts\" /v \"$font\" 2>&1"; |
| my $val = `$cmd`; |
| return $? == 0; |
| } |
| |
| sub checkInstalledTools() |
| { |
| # environment variables. Avoid until this is corrected. |
| my $pythonVer = `python --version 2>&1`; |
| die "You must have Python installed to build WebKit.\n" if ($?); |
| |
| # cURL 7.34.0 has a bug that prevents authentication with opensource.apple.com (and other things using SSL3). |
| my $curlVer = `curl --version 2> NUL`; |
| if (!$? and $curlVer =~ "(.*curl.*)") { |
| $curlVer = $1; |
| if ($curlVer =~ /libcurl\/7\.34\.0/) { |
| print "cURL version 7.34.0 has a bug that prevents authentication with SSL v2 or v3.\n"; |
| print "cURL 7.33.0 is known to work. The cURL projects is preparing an update to\n"; |
| print "correct this problem.\n\n"; |
| die "Please install a working cURL and try again.\n"; |
| } |
| } |
| |
| # MathML requires fonts that may not ship with Windows. |
| # Warn the user if they are missing. |
| my @fonts = ('Cambria & Cambria Math (TrueType)', 'LatinModernMath-Regular (TrueType)', 'STIXMath-Regular (TrueType)'); |
| my @missing = (); |
| foreach my $font (@fonts) { |
| push @missing, $font if not fontExists($font); |
| } |
| |
| if (scalar @missing > 0) { |
| print "*************************************************************\n"; |
| print "Mathematical fonts, such as Latin Modern Math are needed to\n"; |
| print "use the MathML feature. You do not appear to have these fonts\n"; |
| print "on your system.\n\n"; |
| print "You can download a suitable set of fonts from the following URL:\n"; |
| print "https://trac.webkit.org/wiki/MathML/Fonts\n"; |
| print "*************************************************************\n"; |
| } |
| |
| print "Installed tools are correct for the WebKit build.\n"; |
| } |
| |
| sub setupAppleWinEnv() |
| { |
| return unless isAppleWinWebKit() || isFTW(); |
| |
| checkInstalledTools(); |
| |
| if (isWindowsNT()) { |
| my $restartNeeded = 0; |
| my %variablesToSet = (); |
| |
| # FIXME: We should remove this explicit version check for cygwin once we stop supporting Cygwin 1.7.9 or older versions. |
| # https://bugs.webkit.org/show_bug.cgi?id=85791 |
| my $uname_version = (POSIX::uname())[2]; |
| $uname_version =~ s/\(.*\)//; # Remove the trailing cygwin version, if any. |
| $uname_version =~ s/\-.*$//; # Remove trailing dash-version content, if any |
| if (version->parse($uname_version) < version->parse("1.7.10")) { |
| # Setting the environment variable 'CYGWIN' to 'tty' makes cygwin enable extra support (i.e., termios) |
| # for UNIX-like ttys in the Windows console |
| $variablesToSet{CYGWIN} = "tty" unless $ENV{CYGWIN}; |
| } |
| |
| # Those environment variables must be set to be able to build inside Visual Studio. |
| $variablesToSet{WEBKIT_LIBRARIES} = windowsLibrariesDir() unless $ENV{WEBKIT_LIBRARIES}; |
| $variablesToSet{WEBKIT_OUTPUTDIR} = windowsOutputDir() unless $ENV{WEBKIT_OUTPUTDIR}; |
| $variablesToSet{MSBUILDDISABLENODEREUSE} = "1" unless $ENV{MSBUILDDISABLENODEREUSE}; |
| $variablesToSet{_IsNativeEnvironment} = "true" unless $ENV{_IsNativeEnvironment}; |
| $variablesToSet{PreferredToolArchitecture} = "x64" unless $ENV{PreferredToolArchitecture}; |
| |
| foreach my $variable (keys %variablesToSet) { |
| print "Setting the Environment Variable '" . $variable . "' to '" . $variablesToSet{$variable} . "'\n\n"; |
| my $ret = system "setx", $variable, $variablesToSet{$variable}; |
| if ($ret != 0) { |
| system qw(regtool -s set), '\\HKEY_CURRENT_USER\\Environment\\' . $variable, $variablesToSet{$variable}; |
| } |
| $restartNeeded ||= $variable eq "WEBKIT_LIBRARIES" || $variable eq "WEBKIT_OUTPUTDIR"; |
| } |
| |
| if ($restartNeeded) { |
| print "Please restart your computer before attempting to build inside Visual Studio.\n\n"; |
| } |
| } else { |
| if (!defined $ENV{'WEBKIT_LIBRARIES'} || !$ENV{'WEBKIT_LIBRARIES'}) { |
| print "Warning: You must set the 'WebKit_Libraries' environment variable\n"; |
| print " to be able build WebKit from within Visual Studio 2017 and newer.\n"; |
| print " Make sure that 'WebKit_Libraries' points to the\n"; |
| print " 'WebKitLibraries/win' directory, not the 'WebKitLibraries/' directory.\n\n"; |
| } |
| if (!defined $ENV{'WEBKIT_OUTPUTDIR'} || !$ENV{'WEBKIT_OUTPUTDIR'}) { |
| print "Warning: You must set the 'WebKit_OutputDir' environment variable\n"; |
| print " to be able build WebKit from within Visual Studio 2017 and newer.\n\n"; |
| } |
| if (!defined $ENV{'MSBUILDDISABLENODEREUSE'} || !$ENV{'MSBUILDDISABLENODEREUSE'}) { |
| print "Warning: You should set the 'MSBUILDDISABLENODEREUSE' environment variable to '1'\n"; |
| print " to avoid periodic locked log files when building.\n\n"; |
| } |
| } |
| # FIXME (125180): Remove the following temporary 64-bit support once official support is available. |
| if (isWin64() and !$ENV{'WEBKIT_64_SUPPORT'}) { |
| print "Warning: You must set the 'WEBKIT_64_SUPPORT' environment variable\n"; |
| print " to be able run WebKit or JavaScriptCore tests.\n\n"; |
| } |
| } |
| |
| sub setupCygwinEnv() |
| { |
| return if !isAnyWindows(); |
| return if $msBuildPath; |
| |
| my $programFilesPath = programFilesPath(); |
| |
| print "Building results into: ", baseProductDir(), "\n"; |
| print "WEBKIT_OUTPUTDIR is set to: ", $ENV{"WEBKIT_OUTPUTDIR"}, "\n"; |
| print "WEBKIT_LIBRARIES is set to: ", $ENV{"WEBKIT_LIBRARIES"}, "\n"; |
| # FIXME (125180): Remove the following temporary 64-bit support once official support is available. |
| print "WEBKIT_64_SUPPORT is set to: ", $ENV{"WEBKIT_64_SUPPORT"}, "\n" if isWin64(); |
| |
| # We will actually use MSBuild to build WebKit, but we need to find the Visual Studio install (above) to make |
| # sure we use the right options. |
| $msBuildPath = msBuildPath(); |
| if (! -e $msBuildPath) { |
| print "*************************************************************\n"; |
| print "Cannot find '$msBuildPath'\n"; |
| print "Please make sure execute that the Microsoft .NET Framework SDK\n"; |
| print "is installed on this machine.\n"; |
| print "*************************************************************\n"; |
| die; |
| } |
| } |
| |
| sub buildXCodeProject($$@) |
| { |
| my ($project, $clean, @extraOptions) = @_; |
| |
| if ($clean) { |
| push(@extraOptions, "-alltargets"); |
| push(@extraOptions, "clean"); |
| } |
| |
| chomp($ENV{DSYMUTIL_NUM_THREADS} = `sysctl -n hw.activecpu`); |
| return system "xcodebuild", "-project", "$project.xcodeproj", @extraOptions; |
| } |
| |
| sub getVisualStudioToolset() |
| { |
| if (isPlayStation()) { |
| return ""; |
| } elsif (isWin64()) { |
| return "x64"; |
| } else { |
| return "Win32"; |
| } |
| } |
| |
| sub getMSBuildPlatformArgument() |
| { |
| my $toolset = getVisualStudioToolset(); |
| if (defined($toolset) && length($toolset)) { |
| return "/p:Platform=$toolset"; |
| } |
| return ""; |
| } |
| |
| sub getCMakeWindowsToolsetArgument() |
| { |
| my $toolset = getVisualStudioToolset(); |
| if (defined($toolset) && length($toolset)) { |
| return "-A $toolset"; |
| } |
| return ""; |
| } |
| |
| sub buildVisualStudioProject |
| { |
| my ($project, $clean) = @_; |
| setupCygwinEnv(); |
| |
| my $config = configurationForVisualStudio(); |
| |
| chomp($project = `cygpath -w "$project"`) if isCygwin(); |
| |
| my $action = "/t:build"; |
| if ($clean) { |
| $action = "/t:clean"; |
| } |
| |
| my $platform = getMSBuildPlatformArgument(); |
| my $logPath = File::Spec->catdir($baseProductDir, $configuration); |
| make_path($logPath) unless -d $logPath or $logPath eq "."; |
| |
| my $errorLogFile = File::Spec->catfile($logPath, "webkit_errors.log"); |
| chomp($errorLogFile = `cygpath -w "$errorLogFile"`) if isCygwin(); |
| my $errorLogging = "/flp:LogFile=" . $errorLogFile . ";ErrorsOnly"; |
| |
| my $warningLogFile = File::Spec->catfile($logPath, "webkit_warnings.log"); |
| chomp($warningLogFile = `cygpath -w "$warningLogFile"`) if isCygwin(); |
| my $warningLogging = "/flp1:LogFile=" . $warningLogFile . ";WarningsOnly"; |
| |
| my $maxCPUCount = '/maxcpucount:' . numberOfCPUs(); |
| |
| my @command = ($msBuildPath, "/verbosity:minimal", $project, $action, $config, $platform, "/fl", $errorLogging, "/fl1", $warningLogging, $maxCPUCount); |
| print join(" ", @command), "\n"; |
| return system @command; |
| } |
| |
| sub getJhbuildPath() |
| { |
| my @jhbuildPath = File::Spec->splitdir(baseProductDir()); |
| if (isGit() && isGitBranchBuild() && gitBranch()) { |
| pop(@jhbuildPath); |
| } |
| if (isGtk()) { |
| push(@jhbuildPath, "DependenciesGTK"); |
| } elsif (isWPE()) { |
| push(@jhbuildPath, "DependenciesWPE"); |
| } else { |
| die "Cannot get JHBuild path for platform that isn't GTK+ or WPE.\n"; |
| } |
| return File::Spec->catdir(@jhbuildPath); |
| } |
| |
| sub getFlatpakPath() |
| { |
| my @flatpakBuildPath = File::Spec->splitdir(baseProductDir()); |
| if (isGtk()) { |
| push(@flatpakBuildPath, "GTK"); |
| } elsif (isWPE()) { |
| push(@flatpakBuildPath, "WPE"); |
| } else { |
| die "Cannot get Flatpak path for platform that isn't GTK+ or WPE.\n"; |
| } |
| my @configuration = configuration(); |
| push(@flatpakBuildPath, "FlatpakTree$configuration"); |
| |
| return File::Spec->catdir(@flatpakBuildPath); |
| } |
| |
| sub isCachedArgumentfileOutOfDate($@) |
| { |
| my ($filename, $currentContents) = @_; |
| |
| if (! -e $filename) { |
| return 1; |
| } |
| |
| open(CONTENTS_FILE, $filename); |
| chomp(my $previousContents = <CONTENTS_FILE> || ""); |
| close(CONTENTS_FILE); |
| |
| if ($previousContents ne $currentContents) { |
| print "Contents for file $filename have changed.\n"; |
| print "Previous contents were: $previousContents\n\n"; |
| print "New contents are: $currentContents\n"; |
| return 1; |
| } |
| |
| return 0; |
| } |
| |
| sub inFlatpakSandbox() |
| { |
| if (-f "/.flatpak-info") { |
| return 1; |
| } |
| |
| return 0; |
| } |
| |
| sub runInFlatpak(@) |
| { |
| my @arg = @_; |
| my @command = (File::Spec->catfile(sourceDir(), "Tools", "Scripts", "webkit-flatpak")); |
| exec @command, argumentsForConfiguration(), "--command", @_, argumentsForConfiguration(), @ARGV or die; |
| } |
| |
| sub runInFlatpakIfAvailable(@) |
| { |
| if (inFlatpakSandbox()) { |
| return 0; |
| } |
| |
| my @command = (File::Spec->catfile(sourceDir(), "Tools", "Scripts", "webkit-flatpak")); |
| if (system(@command, "--available") != 0) { |
| return 0; |
| } |
| |
| if (! -e getFlatpakPath()) { |
| return 0; |
| } |
| |
| runInFlatpak(@_) |
| } |
| |
| sub wrapperPrefixIfNeeded() |
| { |
| |
| if (isAnyWindows() || isJSCOnly() || isPlayStation()) { |
| return (); |
| } |
| if (isAppleCocoaWebKit()) { |
| return ("xcrun"); |
| } |
| if (shouldUseJhbuild() and ! shouldUseFlatpak()) { |
| my @prefix = (File::Spec->catfile(sourceDir(), "Tools", "jhbuild", "jhbuild-wrapper")); |
| if (isGtk()) { |
| push(@prefix, "--gtk"); |
| } elsif (isWPE()) { |
| push(@prefix, "--wpe"); |
| } |
| push(@prefix, "run"); |
| |
| return @prefix; |
| } |
| |
| return (); |
| } |
| |
| sub shouldUseJhbuild() |
| { |
| return ((isGtk() or isWPE()) and -e getJhbuildPath()); |
| } |
| |
| sub shouldUseFlatpak() |
| { |
| return ((isGtk() or isWPE()) and ! inFlatpakSandbox() and -e getFlatpakPath()); |
| } |
| |
| sub cmakeCachePath() |
| { |
| return File::Spec->catdir(baseProductDir(), configuration(), "CMakeCache.txt"); |
| } |
| |
| sub cmakeFilesPath() |
| { |
| return File::Spec->catdir(baseProductDir(), configuration(), "CMakeFiles"); |
| } |
| |
| sub shouldRemoveCMakeCache(@) |
| { |
| my ($cacheFilePath, @buildArgs) = @_; |
| |
| # We check this first, because we always want to create this file for a fresh build. |
| my $productDir = File::Spec->catdir(baseProductDir(), configuration()); |
| my $optionsCache = File::Spec->catdir($productDir, "build-webkit-options.txt"); |
| my $joinedBuildArgs = join(" ", @buildArgs); |
| if (isCachedArgumentfileOutOfDate($optionsCache, $joinedBuildArgs)) { |
| File::Path::mkpath($productDir) unless -d $productDir; |
| open(CACHED_ARGUMENTS, ">", $optionsCache); |
| print CACHED_ARGUMENTS $joinedBuildArgs; |
| close(CACHED_ARGUMENTS); |
| |
| return 1; |
| } |
| |
| my $cmakeCache = cmakeCachePath(); |
| unless (-e $cmakeCache) { |
| return 0; |
| } |
| |
| my $cacheFileModifiedTime = stat($cmakeCache)->mtime; |
| my $platformConfiguration = File::Spec->catdir(sourceDir(), "Source", "cmake", "Options" . cmakeBasedPortName() . ".cmake"); |
| if ($cacheFileModifiedTime < stat($platformConfiguration)->mtime) { |
| return 1; |
| } |
| |
| my $globalConfiguration = File::Spec->catdir(sourceDir(), "Source", "cmake", "OptionsCommon.cmake"); |
| if ($cacheFileModifiedTime < stat($globalConfiguration)->mtime) { |
| return 1; |
| } |
| |
| # FIXME: This probably does not work as expected, or the next block to |
| # delete the images subdirectory would not be here. Directory mtime does not |
| # percolate upwards when files are added or removed from subdirectories. |
| my $inspectorUserInterfaceDirectory = File::Spec->catdir(sourceDir(), "Source", "WebInspectorUI", "UserInterface"); |
| if ($cacheFileModifiedTime < stat($inspectorUserInterfaceDirectory)->mtime) { |
| return 1; |
| } |
| |
| my $inspectorImageDirectory = File::Spec->catdir(sourceDir(), "Source", "WebInspectorUI", "UserInterface", "Images"); |
| if ($cacheFileModifiedTime < stat($inspectorImageDirectory)->mtime) { |
| return 1; |
| } |
| |
| if(isAnyWindows()) { |
| my $winConfiguration = File::Spec->catdir(sourceDir(), "Source", "cmake", "OptionsWin.cmake"); |
| if ($cacheFileModifiedTime < stat($winConfiguration)->mtime) { |
| return 1; |
| } |
| } |
| |
| # If a change on the JHBuild moduleset has been done, we need to clean the cache as well. |
| if (isGtk() || isWPE()) { |
| my $jhbuildRootDirectory = File::Spec->catdir(getJhbuildPath(), "Root"); |
| # The script update-webkit-libs-jhbuild shall re-generate $jhbuildRootDirectory if the moduleset changed. |
| if (-d $jhbuildRootDirectory && $cacheFileModifiedTime < stat($jhbuildRootDirectory)->mtime) { |
| return 1; |
| } |
| } |
| |
| return 0; |
| } |
| |
| sub removeCMakeCache(@) |
| { |
| my (@buildArgs) = @_; |
| if (shouldRemoveCMakeCache(@buildArgs)) { |
| my $cmakeCache = cmakeCachePath(); |
| my $cmakeFiles = cmakeFilesPath(); |
| unlink($cmakeCache) if -e $cmakeCache; |
| rmtree($cmakeFiles) if -d $cmakeFiles; |
| } |
| } |
| |
| sub canUseNinja(@) |
| { |
| if (!defined($shouldNotUseNinja)) { |
| $shouldNotUseNinja = checkForArgumentAndRemoveFromARGV("--no-ninja"); |
| } |
| |
| if ($shouldNotUseNinja) { |
| return 0; |
| } |
| |
| if (isAppleCocoaWebKit()) { |
| my $devnull = File::Spec->devnull(); |
| if (exitStatus(system("xcrun -find ninja >$devnull 2>&1")) == 0) { |
| return 1; |
| } |
| } |
| |
| # Test both ninja and ninja-build. Fedora uses ninja-build and has patched CMake to also call ninja-build. |
| return commandExists("ninja") || commandExists("ninja-build"); |
| } |
| |
| sub canUseEclipseNinjaGenerator(@) |
| { |
| # Check that eclipse and eclipse Ninja generator is installed |
| my $devnull = File::Spec->devnull(); |
| return commandExists("eclipse") && exitStatus(system("cmake -N -G 'Eclipse CDT4 - Ninja' >$devnull 2>&1")) == 0; |
| } |
| |
| sub cmakeGeneratedBuildfile(@) |
| { |
| my ($willUseNinja) = @_; |
| if ($willUseNinja) { |
| return File::Spec->catfile(baseProductDir(), configuration(), "build.ninja") |
| } elsif (isAnyWindows()) { |
| return File::Spec->catfile(baseProductDir(), configuration(), "WebKit.sln") |
| } else { |
| return File::Spec->catfile(baseProductDir(), configuration(), "Makefile") |
| } |
| } |
| |
| sub generateBuildSystemFromCMakeProject |
| { |
| my ($prefixPath, @cmakeArgs) = @_; |
| my $config = configuration(); |
| my $port = cmakeBasedPortName(); |
| my $buildPath = File::Spec->catdir(baseProductDir(), $config); |
| File::Path::mkpath($buildPath) unless -d $buildPath; |
| my $originalWorkingDirectory = getcwd(); |
| chdir($buildPath) or die; |
| |
| # We try to be smart about when to rerun cmake, so that we can have faster incremental builds. |
| my $willUseNinja = canUseNinja(); |
| if (-e cmakeCachePath() && -e cmakeGeneratedBuildfile($willUseNinja)) { |
| return 0; |
| } |
| |
| my @args; |
| push @args, "-DPORT=\"$port\""; |
| push @args, "-DCMAKE_INSTALL_PREFIX=\"$prefixPath\"" if $prefixPath; |
| push @args, "-DCMAKE_EXPORT_COMPILE_COMMANDS=ON"; |
| if ($config =~ /release/i) { |
| push @args, "-DCMAKE_BUILD_TYPE=Release"; |
| } elsif ($config =~ /debug/i) { |
| push @args, "-DCMAKE_BUILD_TYPE=Debug"; |
| } |
| |
| push @args, "-DENABLE_SANITIZERS=address" if asanIsEnabled(); |
| |
| push @args, "-DLTO_MODE=$ltoMode" if ltoMode(); |
| |
| push @args, '-DCMAKE_TOOLCHAIN_FILE=Platform/PlayStation' if isPlayStation(); |
| |
| if ($willUseNinja) { |
| push @args, "-G"; |
| if (canUseEclipseNinjaGenerator()) { |
| push @args, "'Eclipse CDT4 - Ninja'"; |
| } else { |
| push @args, "Ninja"; |
| } |
| push @args, "-DUSE_THIN_ARCHIVES=OFF" if isPlayStation(); |
| } else { |
| if (isAnyWindows()) { |
| push @args, getCMakeWindowsToolsetArgument(); |
| } |
| if ((isAnyWindows() || isPlayStation()) && defined $ENV{VisualStudioVersion}) { |
| my $var = int($ENV{VisualStudioVersion}); |
| push @args, qq(-G "Visual Studio $var"); |
| } |
| } |
| |
| # Do not show progress of generating bindings in interactive Ninja build not to leave noisy lines on tty |
| push @args, '-DSHOW_BINDINGS_GENERATION_PROGRESS=1' unless ($willUseNinja && -t STDOUT); |
| |
| # Some ports have production mode, but build-webkit should always use developer mode. |
| push @args, "-DDEVELOPER_MODE=ON" if isFTW() || isGtk() || isJSCOnly() || isWPE() || isWinCairo(); |
| |
| if (architecture() eq "x86_64" && shouldBuild32Bit()) { |
| # CMAKE_LIBRARY_ARCHITECTURE is needed to get the right .pc |
| # files in Debian-based systems, for the others |
| # CMAKE_PREFIX_PATH will get us /usr/lib, which should be the |
| # right path for 32bit. See FindPkgConfig.cmake. |
| push @cmakeArgs, '-DFORCE_32BIT=ON -DCMAKE_PREFIX_PATH="/usr" -DCMAKE_LIBRARY_ARCHITECTURE=x86'; |
| $ENV{"CFLAGS"} = "-m32" . ($ENV{"CFLAGS"} || ""); |
| $ENV{"CXXFLAGS"} = "-m32" . ($ENV{"CXXFLAGS"} || ""); |
| $ENV{"LDFLAGS"} = "-m32" . ($ENV{"LDFLAGS"} || ""); |
| } |
| push @args, @cmakeArgs if @cmakeArgs; |
| |
| my $cmakeSourceDir = isCygwin() ? windowsSourceDir() : sourceDir(); |
| push @args, '"' . $cmakeSourceDir . '"'; |
| |
| # We call system("cmake @args") instead of system("cmake", @args) so that @args is |
| # parsed for shell metacharacters. |
| my $wrapper = join(" ", wrapperPrefixIfNeeded()) . " "; |
| my $returnCode = systemVerbose($wrapper . "cmake @args"); |
| |
| chdir($originalWorkingDirectory); |
| return $returnCode; |
| } |
| |
| sub buildCMakeGeneratedProject($) |
| { |
| my (@makeArgs) = @_; |
| my $config = configuration(); |
| my $buildPath = File::Spec->catdir(baseProductDir(), $config); |
| if (! -d $buildPath) { |
| die "Must call generateBuildSystemFromCMakeProject() before building CMake project."; |
| } |
| |
| if ($ENV{VERBOSE} && canUseNinja()) { |
| push @makeArgs, "-v"; |
| push @makeArgs, "-d keeprsp" if (version->parse(determineNinjaVersion()) >= version->parse("1.4.0")); |
| } |
| |
| my $command = "cmake"; |
| my @args = ("--build", $buildPath, "--config", $config); |
| push @args, ("--", @makeArgs) if @makeArgs; |
| |
| # GTK and JSCOnly can use a build script to preserve colors and pretty-printing. |
| if ((isGtk() || isJSCOnly()) && -e "$buildPath/build.sh") { |
| chdir "$buildPath" or die; |
| $command = "$buildPath/build.sh"; |
| @args = (@makeArgs); |
| } |
| |
| # We call system("cmake @args") instead of system("cmake", @args) so that @args is |
| # parsed for shell metacharacters. In particular, @makeArgs may contain such metacharacters. |
| my $wrapper = join(" ", wrapperPrefixIfNeeded()) . " "; |
| return systemVerbose($wrapper . "$command @args"); |
| } |
| |
| sub cleanCMakeGeneratedProject() |
| { |
| my $config = configuration(); |
| my $buildPath = File::Spec->catdir(baseProductDir(), $config); |
| if (-d $buildPath) { |
| return systemVerbose("cmake", "--build", $buildPath, "--config", $config, "--target", "clean"); |
| } |
| return 0; |
| } |
| |
| sub buildCMakeProjectOrExit($$$@) |
| { |
| my ($clean, $prefixPath, $makeArgs, @cmakeArgs) = @_; |
| my $returnCode; |
| |
| exit(exitStatus(cleanCMakeGeneratedProject())) if $clean; |
| |
| if (isGtk() && checkForArgumentAndRemoveFromARGV("--update-gtk")) { |
| system("perl", "$sourceDir/Tools/Scripts/update-webkitgtk-libs") == 0 or die $!; |
| } |
| |
| if (isWPE() && checkForArgumentAndRemoveFromARGV("--update-wpe")) { |
| system("perl", "$sourceDir/Tools/Scripts/update-webkitwpe-libs") == 0 or die $!; |
| } |
| |
| $returnCode = exitStatus(generateBuildSystemFromCMakeProject($prefixPath, @cmakeArgs)); |
| exit($returnCode) if $returnCode; |
| exit 0 if isGenerateProjectOnly(); |
| |
| $returnCode = exitStatus(buildCMakeGeneratedProject($makeArgs)); |
| exit($returnCode) if $returnCode; |
| return 0; |
| } |
| |
| sub cmakeArgsFromFeatures(\@;$) |
| { |
| my ($featuresArrayRef, $enableExperimentalFeatures) = @_; |
| |
| my @args; |
| push @args, "-DENABLE_EXPERIMENTAL_FEATURES=ON" if $enableExperimentalFeatures; |
| foreach (@$featuresArrayRef) { |
| my $featureName = $_->{define}; |
| if ($featureName) { |
| my $featureValue = ${$_->{value}}; # Undef to let the build system use its default. |
| if (defined($featureValue)) { |
| my $featureEnabled = $featureValue ? "ON" : "OFF"; |
| push @args, "-D$featureName=$featureEnabled"; |
| } |
| } |
| } |
| return @args; |
| } |
| |
| sub cmakeBasedPortName() |
| { |
| return ucfirst portName(); |
| } |
| |
| sub determineIsCMakeBuild() |
| { |
| return if defined($isCMakeBuild); |
| $isCMakeBuild = checkForArgumentAndRemoveFromARGV("--cmake"); |
| } |
| |
| sub isCMakeBuild() |
| { |
| return 1 unless isAppleCocoaWebKit(); |
| determineIsCMakeBuild(); |
| return $isCMakeBuild; |
| } |
| |
| sub determineIsGenerateProjectOnly() |
| { |
| return if defined($isGenerateProjectOnly); |
| $isGenerateProjectOnly = checkForArgumentAndRemoveFromARGV("--generate-project-only"); |
| } |
| |
| sub isGenerateProjectOnly() |
| { |
| determineIsGenerateProjectOnly(); |
| return $isGenerateProjectOnly; |
| } |
| |
| sub promptUser |
| { |
| my ($prompt, $default) = @_; |
| my $defaultValue = $default ? "[$default]" : ""; |
| print "$prompt $defaultValue: "; |
| chomp(my $input = <STDIN>); |
| return $input ? $input : $default; |
| } |
| |
| sub appleApplicationSupportPath |
| { |
| open INSTALL_DIR, "</proc/registry/HKEY_LOCAL_MACHINE/SOFTWARE/Apple\ Inc./Apple\ Application\ Support/InstallDir"; |
| my $path = <INSTALL_DIR>; |
| $path =~ s/[\r\n\x00].*//; |
| close INSTALL_DIR; |
| |
| my $unixPath = `cygpath -u '$path'`; |
| chomp $unixPath; |
| return $unixPath; |
| } |
| |
| sub setPathForRunningWebKitApp |
| { |
| my ($env) = @_; |
| |
| if (isAnyWindows()) { |
| my $productBinaryDir = executableProductDir(); |
| if (isAppleWinWebKit() || isFTW()) { |
| $env->{PATH} = join(':', $productBinaryDir, appleApplicationSupportPath(), $env->{PATH} || ""); |
| } elsif (isWinCairo()) { |
| my $winCairoBin = sourceDir() . "/WebKitLibraries/win/" . (isWin64() ? "bin64/" : "bin32/"); |
| my $gstreamerBin = isWin64() ? $ENV{"GSTREAMER_1_0_ROOT_X86_64"} . "bin" : $ENV{"GSTREAMER_1_0_ROOT_X86"} . "bin"; |
| $env->{PATH} = join(':', $productBinaryDir, $winCairoBin, $gstreamerBin, $env->{PATH} || ""); |
| } |
| } |
| } |
| |
| sub printHelpAndExitForRunAndDebugWebKitAppIfNeeded |
| { |
| return unless checkForArgumentAndRemoveFromARGV("--help"); |
| |
| print STDERR <<EOF; |
| Usage: @{[basename($0)]} [options] [args ...] |
| --help Show this help message |
| --no-saved-state Launch the application without state restoration |
| |
| Options specific to macOS: |
| -g|--guard-malloc Enable Guard Malloc |
| --lang=LANGUAGE Use a specific language instead of system language. |
| This accepts a language name (German) or a language code (de, ar, pt_BR, etc). |
| --locale=LOCALE Use a specific locale instead of the system region. |
| EOF |
| |
| exit(1); |
| } |
| |
| sub argumentsForRunAndDebugMacWebKitApp() |
| { |
| my @args = (); |
| if (checkForArgumentAndRemoveFromARGV("--no-saved-state")) { |
| push @args, ("-ApplePersistenceIgnoreStateQuietly", "YES"); |
| } |
| |
| my $lang; |
| if (checkForArgumentAndRemoveFromARGVGettingValue("--lang", \$lang)) { |
| push @args, ("-AppleLanguages", "(" . $lang . ")"); |
| } |
| |
| my $locale; |
| if (checkForArgumentAndRemoveFromARGVGettingValue("--locale", \$locale)) { |
| push @args, ("-AppleLocale", $locale); |
| } |
| |
| unshift @args, @ARGV; |
| |
| return @args; |
| } |
| |
| sub setupMacWebKitEnvironment($) |
| { |
| my ($dyldFrameworkPath) = @_; |
| |
| $dyldFrameworkPath = File::Spec->rel2abs($dyldFrameworkPath); |
| |
| prependToEnvironmentVariableList("DYLD_FRAMEWORK_PATH", $dyldFrameworkPath); |
| prependToEnvironmentVariableList("__XPC_DYLD_FRAMEWORK_PATH", $dyldFrameworkPath); |
| prependToEnvironmentVariableList("DYLD_LIBRARY_PATH", $dyldFrameworkPath); |
| prependToEnvironmentVariableList("__XPC_DYLD_LIBRARY_PATH", $dyldFrameworkPath); |
| $ENV{WEBKIT_UNSET_DYLD_FRAMEWORK_PATH} = "YES"; |
| |
| setUpGuardMallocIfNeeded(); |
| } |
| |
| sub setupUnixWebKitEnvironment($) |
| { |
| my ($productDir) = @_; |
| |
| $ENV{TEST_RUNNER_INJECTED_BUNDLE_FILENAME} = File::Spec->catfile($productDir, "lib", "libTestRunnerInjectedBundle.so"); |
| $ENV{TEST_RUNNER_TEST_PLUGIN_PATH} = File::Spec->catdir($productDir, "lib", "plugins"); |
| } |
| |
| sub setupIOSWebKitEnvironment($) |
| { |
| my ($dyldFrameworkPath) = @_; |
| $dyldFrameworkPath = File::Spec->rel2abs($dyldFrameworkPath); |
| |
| prependToEnvironmentVariableList("DYLD_FRAMEWORK_PATH", $dyldFrameworkPath); |
| prependToEnvironmentVariableList("DYLD_LIBRARY_PATH", $dyldFrameworkPath); |
| |
| setUpGuardMallocIfNeeded(); |
| } |
| |
| sub iosSimulatorApplicationsPath() |
| { |
| # FIXME: We should ask simctl for this information, instead of guessing from available runtimes. |
| my $runtimePath = File::Spec->catdir(sdkPlatformDirectory("iphoneos"), "Library", "Developer", "CoreSimulator", "Profiles", "Runtimes"); |
| opendir(RUNTIMES, $runtimePath); |
| my @runtimes = grep {/.*\.simruntime/} readdir(RUNTIMES); |
| close(RUNTIMES); |
| my $sult = File::Spec->catdir($runtimePath, @runtimes ? $runtimes[0] : "iOS.simruntime", "Contents", "Resources", "RuntimeRoot", "Applications"); |
| return $sult; |
| } |
| |
| sub installedMobileSafariBundle() |
| { |
| return File::Spec->catfile(iosSimulatorApplicationsPath(), "MobileSafari.app"); |
| } |
| |
| sub mobileSafariBundle() |
| { |
| determineConfigurationProductDir(); |
| |
| # Use MobileSafari.app in product directory if present. |
| if (isIOSWebKit() && -d "$configurationProductDir/MobileSafari.app") { |
| return "$configurationProductDir/MobileSafari.app"; |
| } |
| return installedMobileSafariBundle(); |
| } |
| |
| sub plistPathFromBundle($) |
| { |
| my ($appBundle) = @_; |
| return "$appBundle/Info.plist" if -f "$appBundle/Info.plist"; # iOS app bundle |
| return "$appBundle/Contents/Info.plist" if -f "$appBundle/Contents/Info.plist"; # Mac app bundle |
| return ""; |
| } |
| |
| sub appIdentifierFromBundle($) |
| { |
| my ($appBundle) = @_; |
| my $plistPath = File::Spec->rel2abs(plistPathFromBundle($appBundle)); # defaults(1) will complain if the specified path is not absolute. |
| chomp(my $bundleIdentifier = `defaults read '$plistPath' CFBundleIdentifier 2> /dev/null`); |
| return $bundleIdentifier; |
| } |
| |
| sub appDisplayNameFromBundle($) |
| { |
| my ($appBundle) = @_; |
| my $plistPath = File::Spec->rel2abs(plistPathFromBundle($appBundle)); # defaults(1) will complain if the specified path is not absolute. |
| chomp(my $bundleDisplayName = `defaults read '$plistPath' CFBundleDisplayName 2> /dev/null`); |
| return $bundleDisplayName; |
| } |
| |
| sub waitUntilIOSSimulatorDeviceIsInState($$) |
| { |
| my ($deviceUDID, $waitUntilState) = @_; |
| my $device = iosSimulatorDeviceByUDID($deviceUDID); |
| # FIXME: We should add a maximum time limit to wait here. |
| while ($device->{state} ne $waitUntilState) { |
| usleep(500 * 1000); # Waiting 500ms between file system polls does not make script run-safari feel sluggish. |
| $device = iosSimulatorDeviceByUDID($deviceUDID); |
| } |
| } |
| |
| sub waitUntilProcessNotRunning($) |
| { |
| my ($process) = @_; |
| while (system("/bin/ps -eo pid,comm | /usr/bin/grep '$process\$'") == 0) { |
| usleep(500 * 1000); |
| } |
| } |
| |
| sub shutDownIOSSimulatorDevice($) |
| { |
| my ($simulatorDevice) = @_; |
| system("xcrun --sdk iphonesimulator simctl shutdown $simulatorDevice->{UDID} > /dev/null 2>&1"); |
| } |
| |
| sub restartIOSSimulatorDevice($) |
| { |
| my ($simulatorDevice) = @_; |
| shutDownIOSSimulatorDevice($simulatorDevice); |
| |
| exitStatus(system("xcrun", "--sdk", "iphonesimulator", "simctl", "boot", $simulatorDevice->{UDID})) == 0 or die "Failed to boot simulator device $simulatorDevice->{UDID}"; |
| } |
| |
| sub relaunchIOSSimulator($) |
| { |
| my ($simulatedDevice) = @_; |
| quitIOSSimulator($simulatedDevice->{UDID}); |
| |
| # FIXME: <rdar://problem/20916140> Switch to using CoreSimulator.framework for launching and quitting iOS Simulator |
| chomp(my $developerDirectory = $ENV{DEVELOPER_DIR} || `xcode-select --print-path`); |
| my $iosSimulatorPath = File::Spec->catfile($developerDirectory, "Applications", "Simulator.app"); |
| system("open", "-a", $iosSimulatorPath, "--args", "-CurrentDeviceUDID", $simulatedDevice->{UDID}) == 0 or die "Failed to open $iosSimulatorPath: $!"; |
| |
| waitUntilIOSSimulatorDeviceIsInState($simulatedDevice->{UDID}, SIMULATOR_DEVICE_STATE_BOOTED); |
| waitUntilProcessNotRunning("com.apple.datamigrator"); |
| } |
| |
| sub quitIOSSimulator(;$) |
| { |
| my ($waitForShutdownOfSimulatedDeviceUDID) = @_; |
| # FIXME: <rdar://problem/20916140> Switch to using CoreSimulator.framework for launching and quitting iOS Simulator |
| if (exitStatus(system {"osascript"} "osascript", "-e", 'tell application id "com.apple.iphonesimulator" to quit')) { |
| # osascript returns a non-zero exit status if Simulator.app is not registered in LaunchServices. |
| return; |
| } |
| |
| if (!defined($waitForShutdownOfSimulatedDeviceUDID)) { |
| return; |
| } |
| # FIXME: We assume that $waitForShutdownOfSimulatedDeviceUDID was not booted using the simctl command line tool. |
| # Otherwise we will spin indefinitely since quiting the iOS Simulator will not shutdown this device. We |
| # should add a maximum time limit to wait for a device to shutdown and either return an error or die() |
| # on expiration of the time limit. |
| waitUntilIOSSimulatorDeviceIsInState($waitForShutdownOfSimulatedDeviceUDID, SIMULATOR_DEVICE_STATE_SHUTDOWN); |
| } |
| |
| sub iosSimulatorDeviceByName($) |
| { |
| my ($simulatorName) = @_; |
| my $simulatorRuntime = iosSimulatorRuntime(); |
| my @devices = iOSSimulatorDevices(); |
| for my $device (@devices) { |
| if ($device->{name} eq $simulatorName && $device->{runtime} eq $simulatorRuntime) { |
| return $device; |
| } |
| } |
| return undef; |
| } |
| |
| sub iosSimulatorDeviceByUDID($) |
| { |
| my ($simulatedDeviceUDID) = @_; |
| my $devicePlistPath = File::Spec->catfile(iOSSimulatorDevicesPath(), $simulatedDeviceUDID, "device.plist"); |
| if (!-f $devicePlistPath) { |
| return; |
| } |
| # FIXME: We should parse the device.plist file ourself and map the dictionary keys in it to known |
| # dictionary keys so as to decouple our representation of the plist from the actual structure |
| # of the plist, which may change. |
| eval "require Foundation"; |
| return Foundation::perlRefFromObjectRef(NSDictionary->dictionaryWithContentsOfFile_($devicePlistPath)); |
| } |
| |
| sub iosSimulatorRuntime() |
| { |
| my $xcodeSDKVersion = xcodeSDKVersion(); |
| $xcodeSDKVersion =~ s/\./-/; |
| return "com.apple.CoreSimulator.SimRuntime.iOS-$xcodeSDKVersion"; |
| } |
| |
| sub findOrCreateSimulatorForIOSDevice($) |
| { |
| my ($simulatorNameSuffix) = @_; |
| my $simulatorName; |
| my $simulatorDeviceType; |
| if (architecture() eq "x86_64") { |
| $simulatorName = "iPhone SE " . $simulatorNameSuffix; |
| $simulatorDeviceType = "com.apple.CoreSimulator.SimDeviceType.iPhone-SE"; |
| } else { |
| $simulatorName = "iPhone 5 " . $simulatorNameSuffix; |
| $simulatorDeviceType = "com.apple.CoreSimulator.SimDeviceType.iPhone-5"; |
| } |
| my $simulatedDevice = iosSimulatorDeviceByName($simulatorName); |
| return $simulatedDevice if $simulatedDevice; |
| return createiOSSimulatorDevice($simulatorName, $simulatorDeviceType, iosSimulatorRuntime()); |
| } |
| |
| sub isIOSSimulatorSystemInstalledApp($) |
| { |
| my ($appBundle) = @_; |
| my $simulatorApplicationsPath = realpath(iosSimulatorApplicationsPath()); |
| return substr(realpath($appBundle), 0, length($simulatorApplicationsPath)) eq $simulatorApplicationsPath; |
| } |
| |
| sub hasUserInstalledAppInSimulatorDevice($$) |
| { |
| my ($appIdentifier, $simulatedDeviceUDID) = @_; |
| my $userInstalledAppPath = File::Spec->catfile($ENV{HOME}, "Library", "Developer", "CoreSimulator", "Devices", $simulatedDeviceUDID, "data", "Containers", "Bundle", "Application"); |
| if (!-d $userInstalledAppPath) { |
| return 0; # No user installed apps. |
| } |
| local @::userInstalledAppBundles; |
| my $wantedFunction = sub { |
| my $file = $_; |
| |
| # Ignore hidden files and directories. |
| if ($file =~ /^\../) { |
| $File::Find::prune = 1; |
| return; |
| } |
| |
| return if !-d $file || $file !~ /\.app$/; |
| push @::userInstalledAppBundles, $File::Find::name; |
| $File::Find::prune = 1; # Do not traverse contents of app bundle. |
| }; |
| find($wantedFunction, $userInstalledAppPath); |
| for my $userInstalledAppBundle (@::userInstalledAppBundles) { |
| if (appIdentifierFromBundle($userInstalledAppBundle) eq $appIdentifier) { |
| return 1; # Has user installed app. |
| } |
| } |
| return 0; # Does not have user installed app. |
| } |
| |
| sub isSimulatorDeviceBooted($) |
| { |
| my ($simulatedDeviceUDID) = @_; |
| my $device = iosSimulatorDeviceByUDID($simulatedDeviceUDID); |
| return $device && $device->{state} eq SIMULATOR_DEVICE_STATE_BOOTED; |
| } |
| |
| sub runIOSWebKitAppInSimulator($;$) |
| { |
| my ($appBundle, $simulatorOptions) = @_; |
| my $productDir = productDir(); |
| my $appDisplayName = appDisplayNameFromBundle($appBundle); |
| my $appIdentifier = appIdentifierFromBundle($appBundle); |
| my $simulatedDevice = findOrCreateSimulatorForIOSDevice(SIMULATOR_DEVICE_SUFFIX_FOR_WEBKIT_DEVELOPMENT); |
| my $simulatedDeviceUDID = $simulatedDevice->{UDID}; |
| |
| my $willUseSystemInstalledApp = isIOSSimulatorSystemInstalledApp($appBundle); |
| if ($willUseSystemInstalledApp) { |
| if (hasUserInstalledAppInSimulatorDevice($appIdentifier, $simulatedDeviceUDID)) { |
| # Restore the system-installed app in the simulator device corresponding to $appBundle as it |
| # was previously overwritten with a custom built version of the app. |
| # FIXME: Only restore the system-installed version of the app instead of erasing all contents and settings. |
| print "Quitting iOS Simulator...\n"; |
| quitIOSSimulator($simulatedDeviceUDID); |
| print "Erasing contents and settings for simulator device \"$simulatedDevice->{name}\".\n"; |
| exitStatus(system("xcrun", "--sdk", "iphonesimulator", "simctl", "erase", $simulatedDeviceUDID)) == 0 or die; |
| } |
| # FIXME: We assume that if $simulatedDeviceUDID is not booted then iOS Simulator is not open. However |
| # $simulatedDeviceUDID may have been booted using the simctl command line tool. If $simulatedDeviceUDID |
| # was booted using simctl then we should shutdown the device and launch iOS Simulator to boot it again. |
| if (!isSimulatorDeviceBooted($simulatedDeviceUDID)) { |
| print "Launching iOS Simulator...\n"; |
| relaunchIOSSimulator($simulatedDevice); |
| } |
| } else { |
| # FIXME: We should killall(1) any running instances of $appBundle before installing it to ensure |
| # that simctl launch opens the latest installed version of the app. For now we quit and |
| # launch the iOS Simulator again to ensure there are no running instances of $appBundle. |
| print "Quitting and launching iOS Simulator...\n"; |
| relaunchIOSSimulator($simulatedDevice); |
| |
| print "Installing $appBundle.\n"; |
| # Install custom built app, overwriting an app with the same app identifier if one exists. |
| exitStatus(system("xcrun", "--sdk", "iphonesimulator", "simctl", "install", $simulatedDeviceUDID, $appBundle)) == 0 or die; |
| |
| } |
| |
| $simulatorOptions = {} unless $simulatorOptions; |
| |
| my %simulatorENV; |
| %simulatorENV = %{$simulatorOptions->{applicationEnvironment}} if $simulatorOptions->{applicationEnvironment}; |
| { |
| local %ENV; # Shadow global-scope %ENV so that changes to it will not be seen outside of this scope. |
| setupIOSWebKitEnvironment($productDir); |
| %simulatorENV = %ENV; |
| } |
| my $applicationArguments = \@ARGV; |
| $applicationArguments = $simulatorOptions->{applicationArguments} if $simulatorOptions && $simulatorOptions->{applicationArguments}; |
| |
| # Prefix the environment variables with SIMCTL_CHILD_ per `xcrun simctl help launch`. |
| foreach my $key (keys %simulatorENV) { |
| $ENV{"SIMCTL_CHILD_$key"} = $simulatorENV{$key}; |
| } |
| |
| print "Starting $appDisplayName with DYLD_FRAMEWORK_PATH set to point to built WebKit in $productDir.\n"; |
| return exitStatus(system("xcrun", "--sdk", "iphonesimulator", "simctl", "launch", $simulatedDeviceUDID, $appIdentifier, @$applicationArguments)); |
| } |
| |
| sub runIOSWebKitApp($) |
| { |
| my ($appBundle) = @_; |
| if (willUseIOSDeviceSDK()) { |
| die "Only running Safari in iOS Simulator is supported now."; |
| } |
| if (willUseIOSSimulatorSDK()) { |
| return runIOSWebKitAppInSimulator($appBundle); |
| } |
| die "Not using an iOS SDK." |
| } |
| |
| sub archCommandLineArgumentsForRestrictedEnvironmentVariables() |
| { |
| my @arguments = (); |
| foreach my $key (keys(%ENV)) { |
| if ($key =~ /^DYLD_/) { |
| push @arguments, "-e", "$key=$ENV{$key}"; |
| } |
| } |
| return @arguments; |
| } |
| |
| sub runMacWebKitApp($;$) |
| { |
| my ($appPath, $useOpenCommand) = @_; |
| my $productDir = productDir(); |
| print "Starting @{[basename($appPath)]} with DYLD_FRAMEWORK_PATH set to point to built WebKit in $productDir.\n"; |
| |
| local %ENV = %ENV; |
| setupMacWebKitEnvironment($productDir); |
| |
| if (defined($useOpenCommand) && $useOpenCommand == USE_OPEN_COMMAND) { |
| return system("open", "-W", "-a", $appPath, "--args", argumentsForRunAndDebugMacWebKitApp()); |
| } |
| if (architecture()) { |
| return system "arch", "-" . architecture(), archCommandLineArgumentsForRestrictedEnvironmentVariables(), $appPath, argumentsForRunAndDebugMacWebKitApp(); |
| } |
| return system { $appPath } $appPath, argumentsForRunAndDebugMacWebKitApp(); |
| } |
| |
| sub execMacWebKitAppForDebugging($) |
| { |
| my ($appPath) = @_; |
| my $architectureSwitch = "--arch"; |
| my $argumentsSeparator = "--"; |
| |
| my $debuggerPath = `xcrun -find lldb`; |
| chomp $debuggerPath; |
| die "Can't find the lldb executable.\n" unless -x $debuggerPath; |
| |
| my $productDir = productDir(); |
| setupMacWebKitEnvironment($productDir); |
| |
| my @architectureFlags = ($architectureSwitch, architecture()); |
| print "Starting @{[basename($appPath)]} under lldb with DYLD_FRAMEWORK_PATH set to point to built WebKit in $productDir.\n"; |
| exec { $debuggerPath } $debuggerPath, @architectureFlags, $argumentsSeparator, $appPath, argumentsForRunAndDebugMacWebKitApp() or die; |
| } |
| |
| sub execUnixAppForDebugging($) |
| { |
| my ($appPath) = @_; |
| |
| my $debuggerPath = `which gdb | head -1`; |
| chomp $debuggerPath; |
| die "Can't find the gdb executable.\n" unless -x $debuggerPath; |
| |
| my $productDir = productDir(); |
| setupUnixWebKitEnvironment($productDir); |
| |
| my @cmdline = wrapperPrefixIfNeeded(); |
| push @cmdline, $debuggerPath, "--args", $appPath; |
| |
| print "Starting @{[basename($appPath)]} under gdb with build WebKit in $productDir.\n"; |
| exec @cmdline, @ARGV or die; |
| } |
| |
| sub debugSafari |
| { |
| if (isAppleMacWebKit()) { |
| checkFrameworks(); |
| execMacWebKitAppForDebugging(safariPath()); |
| } |
| |
| return 1; # Unsupported platform; can't debug Safari on this platform. |
| } |
| |
| sub runSafari |
| { |
| if (isIOSWebKit()) { |
| return runIOSWebKitApp(mobileSafariBundle()); |
| } |
| |
| if (isAppleMacWebKit()) { |
| return runMacWebKitApp(safariPath()); |
| } |
| |
| if (isAppleWinWebKit() || isFTW()) { |
| my $result; |
| my $webKitLauncherPath = File::Spec->catfile(executableProductDir(), "MiniBrowser.exe"); |
| return system { $webKitLauncherPath } $webKitLauncherPath, @ARGV; |
| } |
| |
| return 1; # Unsupported platform; can't run Safari on this platform. |
| } |
| |
| sub runMiniBrowser |
| { |
| if (isAppleMacWebKit()) { |
| return runMacWebKitApp(File::Spec->catfile(productDir(), "MiniBrowser.app", "Contents", "MacOS", "MiniBrowser")); |
| } |
| if (isAppleWinWebKit() || isFTW()) { |
| my $webKitLauncherPath = File::Spec->catfile(executableProductDir(), "MiniBrowser.exe"); |
| return system { $webKitLauncherPath } $webKitLauncherPath, @ARGV; |
| } |
| return 1; |
| } |
| |
| sub debugMiniBrowser |
| { |
| if (isAppleMacWebKit()) { |
| execMacWebKitAppForDebugging(File::Spec->catfile(productDir(), "MiniBrowser.app", "Contents", "MacOS", "MiniBrowser")); |
| } |
| |
| return 1; |
| } |
| |
| sub runWebKitTestRunner |
| { |
| if (isAppleMacWebKit()) { |
| return runMacWebKitApp(File::Spec->catfile(productDir(), "WebKitTestRunner")); |
| } |
| |
| return 1; |
| } |
| |
| sub debugWebKitTestRunner |
| { |
| if (isAppleMacWebKit()) { |
| execMacWebKitAppForDebugging(File::Spec->catfile(productDir(), "WebKitTestRunner")); |
| } elsif (isGtk() or isWPE()) { |
| execUnixAppForDebugging(File::Spec->catfile(productDir(), "bin", "WebKitTestRunner")); |
| } |
| |
| return 1; |
| } |
| |
| sub readRegistryString |
| { |
| my ($valueName) = @_; |
| chomp(my $string = `regtool --wow32 get "$valueName"`); |
| return $string; |
| } |
| |
| sub writeRegistryString |
| { |
| my ($valueName, $string) = @_; |
| |
| my $error = system "regtool", "--wow32", "set", "-s", $valueName, $string; |
| |
| # On Windows Vista/7 with UAC enabled, regtool will fail to modify the registry, but will still |
| # return a successful exit code. So we double-check here that the value we tried to write to the |
| # registry was really written. |
| return !$error && readRegistryString($valueName) eq $string; |
| } |
| |
| sub formatBuildTime($) |
| { |
| my ($buildTime) = @_; |
| |
| my $buildHours = int($buildTime / 3600); |
| my $buildMins = int(($buildTime - $buildHours * 3600) / 60); |
| my $buildSecs = $buildTime - $buildHours * 3600 - $buildMins * 60; |
| |
| if ($buildHours) { |
| return sprintf("%dh:%02dm:%02ds", $buildHours, $buildMins, $buildSecs); |
| } |
| return sprintf("%02dm:%02ds", $buildMins, $buildSecs); |
| } |
| |
| sub runSvnUpdateAndResolveChangeLogs(@) |
| { |
| my @svnOptions = @_; |
| my $openCommand = "svn update " . join(" ", @svnOptions); |
| open my $update, "$openCommand |" or die "cannot execute command $openCommand"; |
| my @conflictedChangeLogs; |
| while (my $line = <$update>) { |
| print $line; |
| $line =~ m/^C\s+(.+?)[\r\n]*$/; |
| if ($1) { |
| my $filename = normalizePath($1); |
| push @conflictedChangeLogs, $filename if basename($filename) eq "ChangeLog"; |
| } |
| } |
| close $update or die; |
| |
| if (@conflictedChangeLogs) { |
| print "Attempting to merge conflicted ChangeLogs.\n"; |
| my $resolveChangeLogsPath = File::Spec->catfile(sourceDir(), "Tools", "Scripts", "resolve-ChangeLogs"); |
| (system($resolveChangeLogsPath, "--no-warnings", @conflictedChangeLogs) == 0) |
| or die "Could not open resolve-ChangeLogs script: $!.\n"; |
| } |
| } |
| |
| sub runGitUpdate() |
| { |
| # Doing a git fetch first allows setups with svn-remote.svn.fetch = trunk:refs/remotes/origin/master |
| # to perform the rebase much much faster. |
| system("git", "fetch"); |
| if (isGitSVNDirectory(".")) { |
| system("git", "svn", "rebase") == 0 or die; |
| } else { |
| # This will die if branch.$BRANCHNAME.merge isn't set, which is |
| # almost certainly what we want. |
| system("git", "pull") == 0 or die; |
| } |
| } |
| |
| 1; |
